Machine Support
---------------
- The machine specific functions must call the s3c2410_pm_init() function
+ The machine specific functions must call the s3c_pm_init() function
to say that its bootloader is capable of resuming. This can be as
simple as adding the following to the machine's definition:
- INITMACHINE(s3c2410_pm_init)
+ INITMACHINE(s3c_pm_init)
- A board can do its own setup before calling s3c2410_pm_init, if it
+ A board can do its own setup before calling s3c_pm_init, if it
needs to setup anything else for power management support.
There is currently no support for over-riding the default method of
enable_irq_wake(IRQ_EINT0);
- s3c2410_pm_init();
+ s3c_pm_init();
}
CPU supports vector relocation (control
register V bit.)
-ffc00000 fffeffff DMA memory mapping region. Memory returned
+fffe0000 fffeffff XScale cache flush area. This is used
+ in proc-xscale.S to flush the whole data
+ cache. Free for other usage on non-XScale.
+
+fff00000 fffdffff Fixmap mapping region. Addresses provided
+ by fix_to_virt() will be located here.
+
+ffc00000 ffefffff DMA memory mapping region. Memory returned
by the dma_alloc_xxx functions will be
dynamically mapped here.
hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC)
terminal devices. Valid values: 0..8
+ i2c_bus= [HW] Override the default board specific I2C bus speed
+ or register an additional I2C bus that is not
+ registered from board initialization code.
+ Format:
+ <bus_id>,<clkrate>
+
i8042.debug [HW] Toggle i8042 debug mode
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
M: dirk@opfer-online.de
S: Maintained
-ARM/PALMTX SUPPORT
+ARM/PALMTX,PALMT5,PALMLD SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
W: http://hackndev.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+PXA168 SUPPORT
+P: Eric Miao
+M: eric.miao@marvell.com
+P: Jason Chagas
+M: jason.chagas@marvell.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T: git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S: Supported
+
+PXA910 SUPPORT
+P: Eric Miao
+M: eric.miao@marvell.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T: git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S: Supported
+
PXA MMCI DRIVER
S: Orphan
config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
help
This enables support for systems based on the Atmel AT91RM9200,
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
+ select PLAT_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+config ARCH_MMP
+ bool "Marvell PXA168/910"
+ depends on MMU
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
+ select PLAT_PXA
+ help
+ Support for Marvell's PXA168/910 processor line.
+
config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
config PLAT_ORION
bool
+config PLAT_PXA
+ bool
+
source arch/arm/mm/Kconfig
config IWMMXT
bool "Enable iWMMXt support"
- depends on CPU_XSCALE || CPU_XSC3
- default y if PXA27x || PXA3xx
+ depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+ default y if PXA27x || PXA3xx || ARCH_MMP
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
default "2"
depends on NEED_MULTIPLE_NODES
+config HIGHMEM
+ bool "High Memory Support (EXPERIMENTAL)"
+ depends on MMU && EXPERIMENTAL
+ help
+ The address space of ARM processors is only 4 Gigabytes large
+ and it has to accommodate user address space, kernel address
+ space as well as some memory mapped IO. That means that, if you
+ have a large amount of physical memory and/or IO, not all of the
+ memory can be "permanently mapped" by the kernel. The physical
+ memory that is not permanently mapped is called "high memory".
+
+ Depending on the selected kernel/user memory split, minimum
+ vmalloc space and actual amount of RAM, you may not need this
+ option which should result in a slightly faster kernel.
+
+ If unsure, say n.
+
source "mm/Kconfig"
config LEDS
config CPU_FREQ_SA1100
bool
- depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
+ depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
default y
config CPU_FREQ_SA1110
source "lib/Kconfig.debug"
-# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
+# RMK wants arm kernels compiled with frame pointers or stack unwinding.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
- default y
+ default y if !ARM_UNWIND
help
If you say N here, the resulting kernel will be slightly smaller and
- faster. However, when a problem occurs with the kernel, the
- information that is reported is severely limited. Most people
- should say Y here.
+ faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
+ when a problem occurs with the kernel, the information that is
+ reported is severely limited.
+
+config ARM_UNWIND
+ bool "Enable stack unwinding support"
+ depends on AEABI && EXPERIMENTAL
+ default y
+ help
+ This option enables stack unwinding support in the kernel
+ using the information automatically generated by the
+ compiler. The resulting kernel image is slightly bigger but
+ the performance is not affected. Currently, this feature
+ only works with EABI compilers. If unsure say Y.
config DEBUG_USER
bool "Verbose user fault messages"
Say Y here if you want the debug print routines to direct their
output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
- channel.
+ channel and on the XScale with the PEEDI.
It does include a timeout to ensure that the system does not
totally freeze when there is nothing connected to read.
CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
endif
+ifeq ($(CONFIG_ARM_UNWIND),y)
+CFLAGS_ABI +=-funwind-tables
+endif
+
# Need -Uarm for gcc < 3.x
KBUILD_CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
textofs-$(CONFIG_SA1111) := 0x00208000
endif
machine-$(CONFIG_ARCH_PXA) := pxa
+ machine-$(CONFIG_ARCH_MMP) := mmp
+ plat-$(CONFIG_PLAT_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_GEMINI) := gemini
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
+#elif defined(CONFIG_CPU_XSCALE)
+ .macro loadsp, rb
+ .endm
+ .macro writeb, ch, rb
+ mcr p14, 0, \ch, c8, c0, 0
+ .endm
#else
.macro loadsp, rb
.endm
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
+ .word 0x56158000 @ PXA168
+ .word 0xfffff000
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv5tej_mmu_cache_flush
+
+ .word 0x56056930
+ .word 0xff0ffff0 @ PXA935
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
+
.word 0x56050000 @ Feroceon
.word 0xff0f0000
b __armv4_mmu_cache_on
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
+#elif defined(CONFIG_CPU_XSCALE)
+
+static void icedcc_putc(int ch)
+{
+ int status, i = 0x4000000;
+
+ do {
+ if (--i < 0)
+ return;
+
+ asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
+ } while (status & (1 << 28));
+
+ asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
+}
#else
ENTRY(_start)
SECTIONS
{
+ /DISCARD/ : {
+ *(.ARM.exidx*)
+ *(.ARM.extab*)
+ }
+
. = TEXT_START;
_text = .;
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/page-flags.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
BUG_ON(!valid_dma_direction(dir));
+ if (PageHighMem(page)) {
+ dev_err(dev, "DMA buffer bouncing of HIGHMEM pages "
+ "is not supported\n");
+ return ~0;
+ }
+
return map_single(dev, page_address(page) + offset, size, dir);
}
EXPORT_SYMBOL(dma_map_page);
return 0;
}
-unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
-{
- unsigned short gpio_bit;
- unsigned long flag;
- struct scoop_dev *sdev = dev_get_drvdata(dev);
-
- spin_lock_irqsave(&sdev->scoop_lock, flag);
- gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit;
- iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
- spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
- return gpio_bit;
-}
-
-unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit)
-{
- unsigned short gpio_bit;
- unsigned long flag;
- struct scoop_dev *sdev = dev_get_drvdata(dev);
-
- spin_lock_irqsave(&sdev->scoop_lock, flag);
- gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit;
- iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
- spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
- return gpio_bit;
-}
-
-EXPORT_SYMBOL(set_scoop_gpio);
-EXPORT_SYMBOL(reset_scoop_gpio);
-
unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
{
struct scoop_dev *sdev = dev_get_drvdata(dev);
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/regs-rtc.h>
#include <mach/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Dec 16 13:31:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+CONFIG_MACH_KS8695=y
+CONFIG_MACH_DSM320=y
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_PRISM54=m
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Jan 6 13:23:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+# CONFIG_MACH_KS8695 is not set
+# CONFIG_MACH_DSM320 is not set
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
CONFIG_SA1100_BADGE4=y
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Sun Oct 5 11:05:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb 1 16:31:36 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
-CONFIG_MACH_EM_X270=y
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
CONFIG_PXA_SSP=y
# CONFIG_PXA_PWM is not set
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
#
# Processor Type
#
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
+CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
# CONFIG_LIBERTAS_CS is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+CONFIG_TOUCHSCREEN_UCB1400=m
+# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+
#
# I2C GPIO expanders:
#
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
+CONFIG_UCB1400_CORE=m
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
#
# Display device support
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SPI is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_CM_X270=y
+CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_PCA955X is not set
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Mon Dec 3 13:36:09 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 16:18:17 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_EM_X270 is not set
CONFIG_MACH_COLIBRI=y
+# CONFIG_MACH_COLIBRI300 is not set
# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_RAUMFELD_PROTO is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_PXA_PWM is not set
#
# Processor Type
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
#
# FIR device drivers
#
#
# Bluetooth device drivers
#
-# CONFIG_BT_HCIUSB is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=y
+CONFIG_LIB80211_CRYPT_CCMP=y
+CONFIG_LIB80211_CRYPT_TKIP=y
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_ZD1211RW is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PXA is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PXA is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# USB Input Devices
#
# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+# CONFIG_HID_APPLE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 16:13:20 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+CONFIG_MACH_COLIBRI300=y
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_RAUMFELD_PROTO is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_AX88796=y
+# CONFIG_AX88796_93CX6 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_SA1100_COLLIE=y
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb 1 16:43:31 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+CONFIG_MACH_EM_X270=y
+CONFIG_MACH_EXEDA=y
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=1
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_APMPOWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_FB_MBX=m
+# CONFIG_FB_MBX_DEBUG is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_H3800 is not set
CONFIG_SA1100_H3XXX=y
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_SHANNON is not set
# CONFIG_SA1100_SIMPAD is not set
# CONFIG_SA1100_SSP is not set
-# CONFIG_H3600_SLEEVE is not set
#
# Processor Type
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
CONFIG_SA1100_HACKKIT=y
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
CONFIG_SA1100_JORNADA720=y
CONFIG_SA1100_JORNADA720_SSP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Thu Dec 4 15:27:39 2008
+# Linux kernel version: 2.6.29-rc5
+# Tue Mar 3 21:45:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
+CONFIG_LOG_BUF_SHIFT=19
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Marvell Kirkwood Implementations
CONFIG_MACH_DB88F6281_BP=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_TS219=y
CONFIG_PLAT_ORION=y
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
#
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
CONFIG_SPI_ORION=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
+CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
#
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_DMATEST is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Sun Dec 30 13:02:54 2007
+# Linux kernel version: 2.6.29-rc3
+# Fri Jan 30 12:42:03 2009
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
CONFIG_MACH_MAGICIAN=y
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
#
# Processor Type
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_CMDLINE="keepinitrd"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
#
-# CPU Frequency scaling
+# CPU Power Management
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# Dongle support
#
# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
#
# Bluetooth device drivers
#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PXA2XX is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_SHARP_SL is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_SERIAL_PXA_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
+CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
CONFIG_W1=y
#
# 1-wire Bus Masters
#
+# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
+# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
+# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
CONFIG_BATTERY_DS2760=y
+# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
#
# Display device support
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=m
+# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
CONFIG_SND_PXA2XX_SOC=m
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_HID=m
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# Marvell MV78xx0 Implementations
#
CONFIG_MACH_DB78X00_BP=y
+CONFIG_MACH_RD78X00_MASA=y
#
# Boot options
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 14:17:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP_3430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+CONFIG_SMC911X=m
+CONFIG_SMSC911X=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+# CONFIG_DVB_STV0288 is not set
+# CONFIG_DVB_STB6000 is not set
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+# CONFIG_DVB_TDA8261 is not set
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+# CONFIG_DVB_TUNER_CX24113 is not set
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+# CONFIG_DVB_CX24116 is not set
+# CONFIG_DVB_SI21XX is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+# CONFIG_DVB_LGDT3304 is not set
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6405 is not set
+CONFIG_DVB_ISL6421=m
+# CONFIG_DVB_LGS8GL5 is not set
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_AF9013 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_OVERO is not set
+CONFIG_SND_OMAP_SOC_SDP3430=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Fri Mar 20 13:43:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_MACH_TAVOREVB is not set
+
+#
+# Marvell PXA168/910 Implmentations
+#
+CONFIG_MACH_ASPENITE=y
+CONFIG_MACH_ZYLONITE2=y
+# CONFIG_MACH_TTC_DKB is not set
+CONFIG_CPU_PXA168=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_MOHAWK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Fri Mar 20 13:45:12 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_MACH_TAVOREVB=y
+
+#
+# Marvell PXA168/910 Implmentations
+#
+# CONFIG_MACH_ASPENITE is not set
+# CONFIG_MACH_ZYLONITE2 is not set
+CONFIG_MACH_TTC_DKB=y
+CONFIG_CPU_PXA910=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_MOHAWK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 15:28:56 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+CONFIG_MACH_NOKIA_RX51=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+CONFIG_LOCK_STAT=y
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git3
-# Sat Jul 16 15:21:47 2005
+# Linux kernel version: 2.6.28-git6
+# Thu Jan 8 17:14:47 2009
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_FREEZER is not set
#
# System Type
#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_SHARK=y
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Processor Type
CONFIG_CPU_SA110=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
CONFIG_ISA_DMA=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
CONFIG_PCI_HOST_VIA82C505=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_SMP is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
# CONFIG_LEDS_CPU is not set
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
# At least one emulation must be selected
#
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FPE_FASTFPE=y
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
# Power management options
#
# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
#
-# Device Drivers
+# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
-# Generic Driver Options
+# Network testing
#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Memory Technology Devices (MTD)
+# Device Drivers
#
-# CONFIG_MTD is not set
#
-# Parallel port support
+# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
# CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_IDE_ARM=y
-# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
+CONFIG_CS89x0_NOEEPROM=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
-CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# TPM devices
+# Sonics Silicon Backplane
#
-# CONFIG_TCG_TPM is not set
+# CONFIG_SSB is not set
#
-# I2C support
+# Multifunction device drivers
#
-# CONFIG_I2C is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
-# Misc devices
+# Multimedia devices
#
#
-# Multimedia devices
+# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-CONFIG_SOUND_ADLIB=m
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=m
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_KAHLUA is not set
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
#
-# USB support
+# Special HID drivers
#
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
-# USB Gadget Support
+# Enable Host or Gadget support to see Inventra options
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
+# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-
#
# Library routines
#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
# endif
#endif
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE mohawk
+# endif
+#endif
+
#if defined(CONFIG_CPU_FEROCEON)
# define MULTI_CACHE 1
#endif
* must not be used by drivers.
*/
#ifndef __arch_page_to_dma
+
+#if !defined(CONFIG_HIGHMEM)
static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
{
return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
}
+#elif defined(__pfn_to_bus)
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+ return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+}
+#else
+#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
+#endif
static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
{
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
+extern void dma_cache_maint_page(struct page *page, unsigned long offset,
+ size_t size, int rw);
/*
* Return whether the given device DMA address mask can be supported
BUG_ON(!valid_dma_direction(dir));
if (!arch_is_coherent())
- dma_cache_maint(page_address(page) + offset, size, dir);
+ dma_cache_maint_page(page, offset, size, dir);
return page_to_dma(dev, page) + offset;
}
#include <asm/system.h>
#include <asm/scatterlist.h>
-typedef unsigned int dmach_t;
-
#include <mach/isa-dma.h>
/*
- * DMA modes
+ * The DMA modes reflect the settings for the ISA DMA controller
*/
-typedef unsigned int dmamode_t;
-
-#define DMA_MODE_MASK 3
+#define DMA_MODE_MASK 0xcc
-#define DMA_MODE_READ 0
-#define DMA_MODE_WRITE 1
-#define DMA_MODE_CASCADE 2
-#define DMA_AUTOINIT 4
+#define DMA_MODE_READ 0x44
+#define DMA_MODE_WRITE 0x48
+#define DMA_MODE_CASCADE 0xc0
+#define DMA_AUTOINIT 0x10
extern spinlock_t dma_spin_lock;
/* Clear the 'DMA Pointer Flip Flop'.
* Write 0 for LSB/MSB, 1 for MSB/LSB access.
*/
-#define clear_dma_ff(channel)
+#define clear_dma_ff(chan)
/* Set only the page register bits of the transfer address.
*
* NOTE: This is an architecture specific function, and should
* be hidden from the drivers
*/
-extern void set_dma_page(dmach_t channel, char pagenr);
+extern void set_dma_page(unsigned int chan, char pagenr);
/* Request a DMA channel
*
* Some architectures may need to do allocate an interrupt
*/
-extern int request_dma(dmach_t channel, const char * device_id);
+extern int request_dma(unsigned int chan, const char * device_id);
/* Free a DMA channel
*
* Some architectures may need to do free an interrupt
*/
-extern void free_dma(dmach_t channel);
+extern void free_dma(unsigned int chan);
/* Enable DMA for this channel
*
* On some architectures, this may have other side effects like
* enabling an interrupt and setting the DMA registers.
*/
-extern void enable_dma(dmach_t channel);
+extern void enable_dma(unsigned int chan);
/* Disable DMA for this channel
*
* On some architectures, this may have other side effects like
* disabling an interrupt or whatever.
*/
-extern void disable_dma(dmach_t channel);
+extern void disable_dma(unsigned int chan);
/* Test whether the specified channel has an active DMA transfer
*/
-extern int dma_channel_active(dmach_t channel);
+extern int dma_channel_active(unsigned int chan);
/* Set the DMA scatter gather list for this channel
*
* especially since some DMA architectures don't update the
* DMA address immediately, but defer it to the enable_dma().
*/
-extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
/* Set the DMA address for this channel
*
* especially since some DMA architectures don't update the
* DMA address immediately, but defer it to the enable_dma().
*/
-extern void __set_dma_addr(dmach_t channel, void *addr);
-#define set_dma_addr(channel, addr) \
- __set_dma_addr(channel, bus_to_virt(addr))
+extern void __set_dma_addr(unsigned int chan, void *addr);
+#define set_dma_addr(chan, addr) \
+ __set_dma_addr(chan, bus_to_virt(addr))
/* Set the DMA byte count for this channel
*
* especially since some DMA architectures don't update the
* DMA count immediately, but defer it to the enable_dma().
*/
-extern void set_dma_count(dmach_t channel, unsigned long count);
+extern void set_dma_count(unsigned int chan, unsigned long count);
/* Set the transfer direction for this channel
*
* DMA transfer direction immediately, but defer it to the
* enable_dma().
*/
-extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+extern void set_dma_mode(unsigned int chan, unsigned int mode);
/* Set the transfer speed for this channel
*/
-extern void set_dma_speed(dmach_t channel, int cycle_ns);
+extern void set_dma_speed(unsigned int chan, int cycle_ns);
/* Get DMA residue count. After a DMA transfer, this
* should return zero. Reading this while a DMA transfer is
* If called before the channel has been used, it may return 1.
* Otherwise, it returns the number of _bytes_ left to transfer.
*/
-extern int get_dma_residue(dmach_t channel);
+extern int get_dma_residue(unsigned int chan);
#ifndef NO_DMA
#define NO_DMA 255
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
+#define R_ARM_PREL31 42
/*
* These are used to set parameters in the core dumps.
--- /dev/null
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+/*
+ * Nothing too fancy for now.
+ *
+ * On ARM we already have well known fixed virtual addresses imposed by
+ * the architecture such as the vector page which is located at 0xffff0000,
+ * therefore a second level page table is already allocated covering
+ * 0xfff00000 upwards.
+ *
+ * The cache flushing code in proc-xscale.S uses the virtual area between
+ * 0xfffe0000 and 0xfffeffff.
+ */
+
+#define FIXADDR_START 0xfff00000UL
+#define FIXADDR_TOP 0xfffe0000UL
+#define FIXADDR_SIZE (FIXADDR_TOP - FIXADDR_START)
+
+#define FIX_KMAP_BEGIN 0
+#define FIX_KMAP_END (FIXADDR_SIZE >> PAGE_SHIFT)
+
+#define __fix_to_virt(x) (FIXADDR_START + ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) (((x) - FIXADDR_START) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ if (idx >= FIX_KMAP_END)
+ __this_fixmap_does_not_exist();
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned int virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+#endif
extern struct scoop_pcmcia_config *platform_scoop_config;
void reset_scoop(struct device *dev);
-unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit);
-unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit);
unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
--- /dev/null
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#include <asm/kmap_types.h>
+
+#define PKMAP_BASE (PAGE_OFFSET - PMD_SIZE)
+#define LAST_PKMAP PTRS_PER_PTE
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define kmap_prot PAGE_KERNEL
+
+#define flush_cache_kmaps() flush_cache_all()
+
+extern pte_t *pkmap_page_table;
+
+#define ARCH_NEEDS_KMAP_HIGH_GET
+
+extern void *kmap_high(struct page *page);
+extern void *kmap_high_get(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *kmap(struct page *page);
+extern void kunmap(struct page *page);
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+extern struct page *kmap_atomic_to_page(const void *ptr);
+
+#endif
#define HWCAP_CRUNCH 1024
#define HWCAP_THUMBEE 2048
#define HWCAP_NEON 4096
+#define HWCAP_VFPv3 8192
+#define HWCAP_VFPv3D16 16384
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
/*
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
+ KM_L2_CACHE,
KM_TYPE_NR
};
typedef struct dma_struct dma_t;
struct dma_ops {
- int (*request)(dmach_t, dma_t *); /* optional */
- void (*free)(dmach_t, dma_t *); /* optional */
- void (*enable)(dmach_t, dma_t *); /* mandatory */
- void (*disable)(dmach_t, dma_t *); /* mandatory */
- int (*residue)(dmach_t, dma_t *); /* optional */
- int (*setspeed)(dmach_t, dma_t *, int); /* optional */
- char *type;
+ int (*request)(unsigned int, dma_t *); /* optional */
+ void (*free)(unsigned int, dma_t *); /* optional */
+ void (*enable)(unsigned int, dma_t *); /* mandatory */
+ void (*disable)(unsigned int, dma_t *); /* mandatory */
+ int (*residue)(unsigned int, dma_t *); /* optional */
+ int (*setspeed)(unsigned int, dma_t *, int); /* optional */
+ const char *type;
};
struct dma_struct {
unsigned int active:1; /* Transfer active */
unsigned int invalid:1; /* Address/Count changed */
- dmamode_t dma_mode; /* DMA mode */
+ unsigned int dma_mode; /* DMA mode */
int speed; /* DMA speed */
unsigned int lock; /* Device is allocated */
const char *device_id; /* Device name */
- unsigned int dma_base; /* Controller base address */
- int dma_irq; /* Controller IRQ */
- struct scatterlist cur_sg; /* Current controller buffer */
- unsigned int state;
-
- struct dma_ops *d_ops;
+ const struct dma_ops *d_ops;
};
-/* Prototype: void arch_dma_init(dma)
- * Purpose : Initialise architecture specific DMA
- * Params : dma - pointer to array of DMA structures
+/*
+ * isa_dma_add - add an ISA-style DMA channel
*/
-extern void arch_dma_init(dma_t *dma);
+extern int isa_dma_add(unsigned int, dma_t *dma);
-extern void isa_init_dma(dma_t *dma);
+/*
+ * Add the ISA DMA controller. Always takes channels 0-7.
+ */
+extern void isa_init_dma(void);
#define MT_HIGH_VECTORS 8
#define MT_MEMORY 9
#define MT_ROM 10
+#define MT_MEMORY_NONCACHED 11
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
-#define MODULES_END (PAGE_OFFSET)
-#define MODULES_VADDR (MODULES_END - 16*1048576)
-
+#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024)
#if TASK_SIZE > MODULES_VADDR
#error Top of user space clashes with start of module space
#endif
+/*
+ * The highmem pkmap virtual space shares the end of the module area.
+ */
+#ifdef CONFIG_HIGHMEM
+#define MODULES_END (PAGE_OFFSET - PMD_SIZE)
+#else
+#define MODULES_END (PAGE_OFFSET)
+#endif
+
/*
* The XIP kernel gets mapped at the bottom of the module vm area.
* Since we use sections to map it, this macro replaces the physical address
#ifndef __virt_to_bus
#define __virt_to_bus __virt_to_phys
#define __bus_to_virt __phys_to_virt
+#define __pfn_to_bus(x) ((x) << PAGE_SHIFT)
#endif
static inline __deprecated unsigned long virt_to_bus(void *x)
#ifndef _ASM_ARM_MODULE_H
#define _ASM_ARM_MODULE_H
-struct mod_arch_specific
-{
- int foo;
-};
-
#define Elf_Shdr Elf32_Shdr
#define Elf_Sym Elf32_Sym
#define Elf_Ehdr Elf32_Ehdr
+struct unwind_table;
+
+struct mod_arch_specific
+{
+#ifdef CONFIG_ARM_UNWIND
+ Elf_Shdr *unw_sec_init;
+ Elf_Shdr *unw_sec_devinit;
+ Elf_Shdr *unw_sec_core;
+ Elf_Shdr *sec_init_text;
+ Elf_Shdr *sec_devinit_text;
+ Elf_Shdr *sec_core_text;
+ struct unwind_table *unwind_init;
+ struct unwind_table *unwind_devinit;
+ struct unwind_table *unwind_core;
+#endif
+};
+
/*
* Include the ARM architecture version.
*/
# define CPU_NAME cpu_xsc3
# endif
# endif
+# ifdef CONFIG_CPU_MOHAWK
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_mohawk
+# endif
+# endif
# ifdef CONFIG_CPU_FEROCEON
# ifdef CPU_NAME
# undef MULTI_CPU
/* PTRACE_SYSCALL is 24 */
#define PTRACE_GETCRUNCHREGS 25
#define PTRACE_SETCRUNCHREGS 26
+#define PTRACE_GETVFPREGS 27
+#define PTRACE_SETVFPREGS 28
/*
* PSR bits
#define SZ_8M 0x00800000
#define SZ_16M 0x01000000
#define SZ_32M 0x02000000
+#define SZ_48M 0x03000000
#define SZ_64M 0x04000000
#define SZ_128M 0x08000000
#define SZ_256M 0x10000000
--- /dev/null
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+struct stackframe {
+ unsigned long fp;
+ unsigned long sp;
+ unsigned long lr;
+ unsigned long pc;
+};
+
+extern int unwind_frame(struct stackframe *frame);
+extern void walk_stackframe(struct stackframe *frame,
+ int (*fn)(struct stackframe *, void *), void *data);
+
+#endif /* __ASM_STACKTRACE_H */
extern int cpu_architecture(void);
extern void cpu_init(void);
-void arm_machine_restart(char mode);
-extern void (*arm_pm_restart)(char str);
+void arm_machine_restart(char mode, const char *cmd);
+extern void (*arm_pm_restart)(char str, const char *cmd);
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
#define thread_saved_pc(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
+#define thread_saved_sp(tsk) \
+ ((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
extern void iwmmxt_task_release(struct thread_info *);
extern void iwmmxt_task_switch(struct thread_info *);
+extern void vfp_sync_state(struct thread_info *thread);
+
#endif
/*
}
extern void __init early_trap_init(void);
+extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
#endif
--- /dev/null
+/*
+ * arch/arm/include/asm/unwind.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNWIND_H
+#define __ASM_UNWIND_H
+
+#ifndef __ASSEMBLY__
+
+/* Unwind reason code according the the ARM EABI documents */
+enum unwind_reason_code {
+ URC_OK = 0, /* operation completed successfully */
+ URC_CONTINUE_UNWIND = 8,
+ URC_FAILURE = 9 /* unspecified failure of some kind */
+};
+
+struct unwind_idx {
+ unsigned long addr;
+ unsigned long insn;
+};
+
+struct unwind_table {
+ struct list_head list;
+ struct unwind_idx *start;
+ struct unwind_idx *stop;
+ unsigned long begin_addr;
+ unsigned long end_addr;
+};
+
+extern struct unwind_table *unwind_table_add(unsigned long start,
+ unsigned long size,
+ unsigned long text_addr,
+ unsigned long text_size);
+extern void unwind_table_del(struct unwind_table *tab);
+extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
+
+#ifdef CONFIG_ARM_UNWIND
+extern int __init unwind_init(void);
+#else
+static inline int __init unwind_init(void)
+{
+ return 0;
+}
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_ARM_UNWIND
+#define UNWIND(code...) code
+#else
+#define UNWIND(code...)
+#endif
+
+#endif /* __ASM_UNWIND_H */
#define HOST_TEXT_START_ADDR (u.start_code)
#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+/*
+ * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
+ * are ignored by the ptrace system call.
+ */
+struct user_vfp {
+ unsigned long long fpregs[32];
+ unsigned long fpscr;
+};
+
#endif /* _ARM_USER_H */
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_ARM_UNWIND) += unwind.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
+obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
1002:
.endm
+#elif defined(CONFIG_CPU_XSCALE)
+
+ .macro addruart, rx
+ .endm
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c8, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x10000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ bne 1001b
+1002:
+ .endm
+
#else
.macro addruart, rx
#include <asm/dma.h>
#include <asm/mach/dma.h>
-#define ISA_DMA_MODE_READ 0x44
-#define ISA_DMA_MODE_WRITE 0x48
-#define ISA_DMA_MODE_CASCADE 0xc0
-#define ISA_DMA_AUTOINIT 0x10
-
#define ISA_DMA_MASK 0
#define ISA_DMA_MODE 1
#define ISA_DMA_CLRFF 2
{ 0xd4, 0xd6, 0xd8, 0x48a, 0x08a, 0xcc, 0xce }
};
-static int isa_get_dma_residue(dmach_t channel, dma_t *dma)
+static int isa_get_dma_residue(unsigned int chan, dma_t *dma)
{
- unsigned int io_port = isa_dma_port[channel][ISA_DMA_COUNT];
+ unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT];
int count;
count = 1 + inb(io_port);
count |= inb(io_port) << 8;
- return channel < 4 ? count : (count << 1);
+ return chan < 4 ? count : (count << 1);
}
-static void isa_enable_dma(dmach_t channel, dma_t *dma)
+static void isa_enable_dma(unsigned int chan, dma_t *dma)
{
if (dma->invalid) {
unsigned long address, length;
unsigned int mode;
enum dma_data_direction direction;
- mode = channel & 3;
+ mode = (chan & 3) | dma->dma_mode;
switch (dma->dma_mode & DMA_MODE_MASK) {
case DMA_MODE_READ:
- mode |= ISA_DMA_MODE_READ;
direction = DMA_FROM_DEVICE;
break;
case DMA_MODE_WRITE:
- mode |= ISA_DMA_MODE_WRITE;
direction = DMA_TO_DEVICE;
break;
case DMA_MODE_CASCADE:
- mode |= ISA_DMA_MODE_CASCADE;
direction = DMA_BIDIRECTIONAL;
break;
address = dma->buf.dma_address;
length = dma->buf.length - 1;
- outb(address >> 16, isa_dma_port[channel][ISA_DMA_PGLO]);
- outb(address >> 24, isa_dma_port[channel][ISA_DMA_PGHI]);
+ outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]);
+ outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]);
- if (channel >= 4) {
+ if (chan >= 4) {
address >>= 1;
length >>= 1;
}
- outb(0, isa_dma_port[channel][ISA_DMA_CLRFF]);
-
- outb(address, isa_dma_port[channel][ISA_DMA_ADDR]);
- outb(address >> 8, isa_dma_port[channel][ISA_DMA_ADDR]);
+ outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]);
- outb(length, isa_dma_port[channel][ISA_DMA_COUNT]);
- outb(length >> 8, isa_dma_port[channel][ISA_DMA_COUNT]);
+ outb(address, isa_dma_port[chan][ISA_DMA_ADDR]);
+ outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]);
- if (dma->dma_mode & DMA_AUTOINIT)
- mode |= ISA_DMA_AUTOINIT;
+ outb(length, isa_dma_port[chan][ISA_DMA_COUNT]);
+ outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]);
- outb(mode, isa_dma_port[channel][ISA_DMA_MODE]);
+ outb(mode, isa_dma_port[chan][ISA_DMA_MODE]);
dma->invalid = 0;
}
- outb(channel & 3, isa_dma_port[channel][ISA_DMA_MASK]);
+ outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]);
}
-static void isa_disable_dma(dmach_t channel, dma_t *dma)
+static void isa_disable_dma(unsigned int chan, dma_t *dma)
{
- outb(channel | 4, isa_dma_port[channel][ISA_DMA_MASK]);
+ outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]);
}
static struct dma_ops isa_dma_ops = {
.end = 0x048f
} };
-void __init isa_init_dma(dma_t *dma)
+static dma_t isa_dma[8];
+
+/*
+ * ISA DMA always starts at channel 0
+ */
+void __init isa_init_dma(void)
{
/*
* Try to autodetect presence of an ISA DMA controller.
outb(0xaa, 0x00);
if (inb(0) == 0x55 && inb(0) == 0xaa) {
- int channel, i;
+ unsigned int chan, i;
- for (channel = 0; channel < 8; channel++) {
- dma[channel].d_ops = &isa_dma_ops;
- isa_disable_dma(channel, NULL);
+ for (chan = 0; chan < 8; chan++) {
+ isa_dma[chan].d_ops = &isa_dma_ops;
+ isa_disable_dma(chan, NULL);
}
outb(0x40, 0x0b);
for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
request_resource(&ioport_resource, dma_resources + i);
+
+ for (chan = 0; chan < 8; chan++) {
+ int ret = isa_dma_add(chan, &isa_dma[chan]);
+ if (ret)
+ printk(KERN_ERR "ISADMA%u: unable to register: %d\n",
+ chan, ret);
+ }
}
}
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
+#include <linux/scatterlist.h>
#include <asm/dma.h>
DEFINE_SPINLOCK(dma_spin_lock);
EXPORT_SYMBOL(dma_spin_lock);
-static dma_t dma_chan[MAX_DMA_CHANNELS];
+static dma_t *dma_chan[MAX_DMA_CHANNELS];
+
+static inline dma_t *dma_channel(unsigned int chan)
+{
+ if (chan >= MAX_DMA_CHANNELS)
+ return NULL;
+
+ return dma_chan[chan];
+}
+
+int __init isa_dma_add(unsigned int chan, dma_t *dma)
+{
+ if (!dma->d_ops)
+ return -EINVAL;
+
+ sg_init_table(&dma->buf, 1);
+
+ if (dma_chan[chan])
+ return -EBUSY;
+ dma_chan[chan] = dma;
+ return 0;
+}
/*
* Request DMA channel
*
* On certain platforms, we have to allocate an interrupt as well...
*/
-int request_dma(dmach_t channel, const char *device_id)
+int request_dma(unsigned int chan, const char *device_id)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret;
- if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+ if (!dma)
goto bad_dma;
if (xchg(&dma->lock, 1) != 0)
ret = 0;
if (dma->d_ops->request)
- ret = dma->d_ops->request(channel, dma);
+ ret = dma->d_ops->request(chan, dma);
if (ret)
xchg(&dma->lock, 0);
return ret;
bad_dma:
- printk(KERN_ERR "dma: trying to allocate DMA%d\n", channel);
+ printk(KERN_ERR "dma: trying to allocate DMA%d\n", chan);
return -EINVAL;
busy:
*
* On certain platforms, we have to free interrupt as well...
*/
-void free_dma(dmach_t channel)
+void free_dma(unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
- if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+ if (!dma)
goto bad_dma;
if (dma->active) {
- printk(KERN_ERR "dma%d: freeing active DMA\n", channel);
- dma->d_ops->disable(channel, dma);
+ printk(KERN_ERR "dma%d: freeing active DMA\n", chan);
+ dma->d_ops->disable(chan, dma);
dma->active = 0;
}
if (xchg(&dma->lock, 0) != 0) {
if (dma->d_ops->free)
- dma->d_ops->free(channel, dma);
+ dma->d_ops->free(chan, dma);
return;
}
- printk(KERN_ERR "dma%d: trying to free free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to free free DMA\n", chan);
return;
bad_dma:
- printk(KERN_ERR "dma: trying to free DMA%d\n", channel);
+ printk(KERN_ERR "dma: trying to free DMA%d\n", chan);
}
EXPORT_SYMBOL(free_dma);
/* Set DMA Scatter-Gather list
*/
-void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg)
+void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA SG while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = sg;
dma->sgcount = nr_sg;
*
* Copy address to the structure, and set the invalid bit
*/
-void __set_dma_addr (dmach_t channel, void *addr)
+void __set_dma_addr (unsigned int chan, void *addr)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA address while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = NULL;
dma->addr = addr;
*
* Copy address to the structure, and set the invalid bit
*/
-void set_dma_count (dmach_t channel, unsigned long count)
+void set_dma_count (unsigned int chan, unsigned long count)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA count while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = NULL;
dma->count = count;
/* Set DMA direction mode
*/
-void set_dma_mode (dmach_t channel, dmamode_t mode)
+void set_dma_mode (unsigned int chan, unsigned int mode)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA mode while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->dma_mode = mode;
dma->invalid = 1;
/* Enable DMA channel
*/
-void enable_dma (dmach_t channel)
+void enable_dma (unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (!dma->lock)
goto free_dma;
if (dma->active == 0) {
dma->active = 1;
- dma->d_ops->enable(channel, dma);
+ dma->d_ops->enable(chan, dma);
}
return;
free_dma:
- printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to enable free DMA\n", chan);
BUG();
}
EXPORT_SYMBOL(enable_dma);
/* Disable DMA channel
*/
-void disable_dma (dmach_t channel)
+void disable_dma (unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (!dma->lock)
goto free_dma;
if (dma->active == 1) {
dma->active = 0;
- dma->d_ops->disable(channel, dma);
+ dma->d_ops->disable(chan, dma);
}
return;
free_dma:
- printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to disable free DMA\n", chan);
BUG();
}
EXPORT_SYMBOL(disable_dma);
/*
* Is the specified DMA channel active?
*/
-int dma_channel_active(dmach_t channel)
+int dma_channel_active(unsigned int chan)
{
- return dma_chan[channel].active;
+ dma_t *dma = dma_channel(chan);
+ return dma->active;
}
EXPORT_SYMBOL(dma_channel_active);
-void set_dma_page(dmach_t channel, char pagenr)
+void set_dma_page(unsigned int chan, char pagenr)
{
- printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel);
+ printk(KERN_ERR "dma%d: trying to set_dma_page\n", chan);
}
EXPORT_SYMBOL(set_dma_page);
-void set_dma_speed(dmach_t channel, int cycle_ns)
+void set_dma_speed(unsigned int chan, int cycle_ns)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret = 0;
if (dma->d_ops->setspeed)
- ret = dma->d_ops->setspeed(channel, dma, cycle_ns);
+ ret = dma->d_ops->setspeed(chan, dma, cycle_ns);
dma->speed = ret;
}
EXPORT_SYMBOL(set_dma_speed);
-int get_dma_residue(dmach_t channel)
+int get_dma_residue(unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret = 0;
if (dma->d_ops->residue)
- ret = dma->d_ops->residue(channel, dma);
+ ret = dma->d_ops->residue(chan, dma);
return ret;
}
EXPORT_SYMBOL(get_dma_residue);
-
-static int __init init_dma(void)
-{
- arch_dma_init(dma_chan);
- return 0;
-}
-
-core_initcall(init_dma);
#include <asm/vfpmacros.h>
#include <mach/entry-macro.S>
#include <asm/thread_notify.h>
+#include <asm/unwind.h>
#include "entry-header.S"
#endif
.macro svc_entry, stack_hole=0
+ UNWIND(.fnstart )
+ UNWIND(.save {r0 - pc} )
sub sp, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( tst sp, #4 )
SPFIX( bicne sp, sp, #4 )
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__dabt_svc)
.align 5
bleq trace_hardirqs_on
#endif
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__irq_svc)
.ltorg
ldr lr, [sp, #S_PSR] @ Get SVC cpsr
msr spsr_cxsf, lr
ldmia sp, {r0 - pc}^ @ Restore SVC registers
+ UNWIND(.fnend )
ENDPROC(__und_svc)
.align 5
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__pabt_svc)
.align 5
#endif
.macro usr_entry
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind ) @ don't unwind the user space
sub sp, sp, #S_FRAME_SIZE
stmib sp, {r1 - r12}
mov r2, sp
adr lr, ret_from_exception
b do_DataAbort
+ UNWIND(.fnend )
ENDPROC(__dabt_usr)
.align 5
mov why, #0
b ret_to_user
+ UNWIND(.fnend )
ENDPROC(__irq_usr)
.ltorg
#else
b __und_usr_unknown
#endif
+ UNWIND(.fnend )
ENDPROC(__und_usr)
@
enable_irq @ Enable interrupts
mov r1, sp @ regs
bl do_PrefetchAbort @ call abort handler
+ UNWIND(.fnend )
/* fall through */
/*
* This is the return code to user mode for abort handlers
*/
ENTRY(ret_from_exception)
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
get_thread_info tsk
mov why, #0
b ret_to_user
+ UNWIND(.fnend )
ENDPROC(__pabt_usr)
ENDPROC(ret_from_exception)
* previous and next are guaranteed not to be the same.
*/
ENTRY(__switch_to)
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
add ip, r1, #TI_CPU_SAVE
ldr r3, [r2, #TI_TP_VALUE]
stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack
bl atomic_notifier_call_chain
mov r0, r5
ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
+ UNWIND(.fnend )
ENDPROC(__switch_to)
__INIT
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <mach/entry-macro.S>
+#include <asm/unwind.h>
#include "entry-header.S"
* stack.
*/
ret_fast_syscall:
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
disable_irq @ disable interrupts
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
+ UNWIND(.fnend )
/*
* Ok, we need to do extra processing, enter the slow path.
#include <asm/pgtable.h>
#include <asm/sections.h>
+#include <asm/unwind.h>
#ifdef CONFIG_XIP_KERNEL
/*
char *secstrings,
struct module *mod)
{
+#ifdef CONFIG_ARM_UNWIND
+ Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+
+ for (s = sechdrs; s < sechdrs_end; s++) {
+ if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_init = s;
+ else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_devinit = s;
+ else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_core = s;
+ else if (strcmp(".init.text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_init_text = s;
+ else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_devinit_text = s;
+ else if (strcmp(".text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_core_text = s;
+ }
+#endif
return 0;
}
loc = dstsec->sh_addr + rel->r_offset;
switch (ELF32_R_TYPE(rel->r_info)) {
+ case R_ARM_NONE:
+ /* ignore */
+ break;
+
case R_ARM_ABS32:
*(u32 *)loc += sym->st_value;
break;
*(u32 *)loc |= offset & 0x00ffffff;
break;
+ case R_ARM_PREL31:
+ offset = *(u32 *)loc + sym->st_value - loc;
+ *(u32 *)loc = offset & 0x7fffffff;
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
return -ENOEXEC;
}
+#ifdef CONFIG_ARM_UNWIND
+static void register_unwind_tables(struct module *mod)
+{
+ if (mod->arch.unw_sec_init && mod->arch.sec_init_text)
+ mod->arch.unwind_init =
+ unwind_table_add(mod->arch.unw_sec_init->sh_addr,
+ mod->arch.unw_sec_init->sh_size,
+ mod->arch.sec_init_text->sh_addr,
+ mod->arch.sec_init_text->sh_size);
+ if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text)
+ mod->arch.unwind_devinit =
+ unwind_table_add(mod->arch.unw_sec_devinit->sh_addr,
+ mod->arch.unw_sec_devinit->sh_size,
+ mod->arch.sec_devinit_text->sh_addr,
+ mod->arch.sec_devinit_text->sh_size);
+ if (mod->arch.unw_sec_core && mod->arch.sec_core_text)
+ mod->arch.unwind_core =
+ unwind_table_add(mod->arch.unw_sec_core->sh_addr,
+ mod->arch.unw_sec_core->sh_size,
+ mod->arch.sec_core_text->sh_addr,
+ mod->arch.sec_core_text->sh_size);
+}
+
+static void unregister_unwind_tables(struct module *mod)
+{
+ unwind_table_del(mod->arch.unwind_init);
+ unwind_table_del(mod->arch.unwind_devinit);
+ unwind_table_del(mod->arch.unwind_core);
+}
+#else
+static inline void register_unwind_tables(struct module *mod) { }
+static inline void unregister_unwind_tables(struct module *mod) { }
+#endif
+
int
module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *module)
{
+ register_unwind_tables(module);
return 0;
}
void
module_arch_cleanup(struct module *mod)
{
+ unregister_unwind_tables(mod);
}
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/thread_notify.h>
+#include <asm/stacktrace.h>
#include <asm/mach/time.h>
static const char *processor_modes[] = {
__setup("nohlt", nohlt_setup);
__setup("hlt", hlt_setup);
-void arm_machine_restart(char mode)
+void arm_machine_restart(char mode, const char *cmd)
{
/*
* Clean and disable cache, and turn off interrupts
/*
* Now call the architecture specific reboot code.
*/
- arch_reset(mode);
+ arch_reset(mode, cmd);
/*
* Whoops - the architecture was unable to reboot.
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
-void (*arm_pm_restart)(char str) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
EXPORT_SYMBOL_GPL(arm_pm_restart);
pm_power_off();
}
-void machine_restart(char * __unused)
+void machine_restart(char *cmd)
{
- arm_pm_restart(reboot_mode);
+ arm_pm_restart(reboot_mode, cmd);
}
void __show_regs(struct pt_regs *regs)
unsigned long get_wchan(struct task_struct *p)
{
- unsigned long fp, lr;
- unsigned long stack_start, stack_end;
+ struct stackframe frame;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
- stack_start = (unsigned long)end_of_stack(p);
- stack_end = (unsigned long)task_stack_page(p) + THREAD_SIZE;
-
- fp = thread_saved_fp(p);
+ frame.fp = thread_saved_fp(p);
+ frame.sp = thread_saved_sp(p);
+ frame.lr = 0; /* recovered from the stack */
+ frame.pc = thread_saved_pc(p);
do {
- if (fp < stack_start || fp > stack_end)
+ int ret = unwind_frame(&frame);
+ if (ret < 0)
return 0;
- lr = ((unsigned long *)fp)[-1];
- if (!in_sched_functions(lr))
- return lr;
- fp = *(unsigned long *) (fp - 12);
+ if (!in_sched_functions(frame.pc))
+ return frame.pc;
} while (count ++ < 16);
return 0;
}
}
#endif
+#ifdef CONFIG_VFP
+/*
+ * Get the child VFP state.
+ */
+static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
+{
+ struct thread_info *thread = task_thread_info(tsk);
+ union vfp_state *vfp = &thread->vfpstate;
+ struct user_vfp __user *ufp = data;
+
+ vfp_sync_state(thread);
+
+ /* copy the floating point registers */
+ if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
+ sizeof(vfp->hard.fpregs)))
+ return -EFAULT;
+
+ /* copy the status and control register */
+ if (put_user(vfp->hard.fpscr, &ufp->fpscr))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * Set the child VFP state.
+ */
+static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
+{
+ struct thread_info *thread = task_thread_info(tsk);
+ union vfp_state *vfp = &thread->vfpstate;
+ struct user_vfp __user *ufp = data;
+
+ vfp_sync_state(thread);
+
+ /* copy the floating point registers */
+ if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
+ sizeof(vfp->hard.fpregs)))
+ return -EFAULT;
+
+ /* copy the status and control register */
+ if (get_user(vfp->hard.fpscr, &ufp->fpscr))
+ return -EFAULT;
+
+ return 0;
+}
+#endif
+
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
break;
#endif
+#ifdef CONFIG_VFP
+ case PTRACE_GETVFPREGS:
+ ret = ptrace_getvfpregs(child, (void __user *)data);
+ break;
+
+ case PTRACE_SETVFPREGS:
+ ret = ptrace_setvfpregs(child, (void __user *)data);
+ break;
+#endif
+
default:
ret = ptrace_request(child, request, addr, data);
break;
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/traps.h>
+#include <asm/unwind.h>
#include "compat.h"
#include "atags.h"
struct machine_desc *mdesc;
char *from = default_command_line;
+ unwind_init();
+
setup_processor();
mdesc = setup_machine(machine_arch_type);
machine_name = mdesc->name;
"crunch",
"thumbee",
"neon",
+ "vfpv3",
+ "vfpv3d16",
NULL
};
pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+ flush_pmd_entry(pmd);
/*
* We need to tell the secondary core where to find
secondary_data.pgdir = 0;
*pmd = __pmd(0);
+ clean_pmd_entry(pmd);
pgd_free(&init_mm, pgd);
if (ret) {
#include <linux/sched.h>
#include <linux/stacktrace.h>
-#include "stacktrace.h"
-
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
- int (*fn)(struct stackframe *, void *), void *data)
+#include <asm/stacktrace.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * Unwind the current stack frame and store the new register values in the
+ * structure passed as argument. Unwinding is equivalent to a function return,
+ * hence the new PC value rather than LR should be used for backtrace.
+ *
+ * With framepointer enabled, a simple function prologue looks like this:
+ * mov ip, sp
+ * stmdb sp!, {fp, ip, lr, pc}
+ * sub fp, ip, #4
+ *
+ * A simple function epilogue looks like this:
+ * ldm sp, {fp, sp, pc}
+ *
+ * Note that with framepointer enabled, even the leaf functions have the same
+ * prologue and epilogue, therefore we can ignore the LR value in this case.
+ */
+int unwind_frame(struct stackframe *frame)
{
- struct stackframe *frame;
-
- do {
- /*
- * Check current frame pointer is within bounds
- */
- if (fp < (low + 12) || fp + 4 >= high)
- break;
+ unsigned long high, low;
+ unsigned long fp = frame->fp;
- frame = (struct stackframe *)(fp - 12);
+ /* only go to a higher address on the stack */
+ low = frame->sp;
+ high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
- if (fn(frame, data))
- break;
+ /* check current frame pointer is within bounds */
+ if (fp < (low + 12) || fp + 4 >= high)
+ return -EINVAL;
- /*
- * Update the low bound - the next frame must always
- * be at a higher address than the current frame.
- */
- low = fp + 4;
- fp = frame->fp;
- } while (fp);
+ /* restore the registers from the stack frame */
+ frame->fp = *(unsigned long *)(fp - 12);
+ frame->sp = *(unsigned long *)(fp - 8);
+ frame->pc = *(unsigned long *)(fp - 4);
return 0;
}
+#endif
+
+void walk_stackframe(struct stackframe *frame,
+ int (*fn)(struct stackframe *, void *), void *data)
+{
+ while (1) {
+ int ret;
+
+ if (fn(frame, data))
+ break;
+ ret = unwind_frame(frame);
+ if (ret < 0)
+ break;
+ }
+}
EXPORT_SYMBOL(walk_stackframe);
#ifdef CONFIG_STACKTRACE
{
struct stack_trace_data *data = d;
struct stack_trace *trace = data->trace;
- unsigned long addr = frame->lr;
+ unsigned long addr = frame->pc;
if (data->no_sched_functions && in_sched_functions(addr))
return 0;
void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
{
struct stack_trace_data data;
- unsigned long fp, base;
+ struct stackframe frame;
data.trace = trace;
data.skip = trace->skip;
- base = (unsigned long)task_stack_page(tsk);
if (tsk != current) {
#ifdef CONFIG_SMP
BUG();
#else
data.no_sched_functions = 1;
- fp = thread_saved_fp(tsk);
+ frame.fp = thread_saved_fp(tsk);
+ frame.sp = thread_saved_sp(tsk);
+ frame.lr = 0; /* recovered from the stack */
+ frame.pc = thread_saved_pc(tsk);
#endif
} else {
+ register unsigned long current_sp asm ("sp");
+
data.no_sched_functions = 0;
- asm("mov %0, fp" : "=r" (fp));
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)save_stack_trace_tsk;
}
- walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+ walk_stackframe(&frame, save_trace, &data);
if (trace->nr_entries < trace->max_entries)
trace->entries[trace->nr_entries++] = ULONG_MAX;
}
+++ /dev/null
-struct stackframe {
- unsigned long fp;
- unsigned long sp;
- unsigned long lr;
- unsigned long pc;
-};
-
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
- int (*fn)(struct stackframe *, void *), void *data);
#include <asm/leds.h>
#include <asm/thread_info.h>
+#include <asm/stacktrace.h>
#include <asm/mach/time.h>
/*
#ifdef CONFIG_SMP
unsigned long profile_pc(struct pt_regs *regs)
{
- unsigned long fp, pc = instruction_pointer(regs);
+ struct stackframe frame;
- if (in_lock_functions(pc)) {
- fp = regs->ARM_fp;
- pc = ((unsigned long *)fp)[-1];
- }
+ if (!in_lock_functions(regs->ARM_pc))
+ return regs->ARM_pc;
+
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ do {
+ int ret = unwind_frame(&frame);
+ if (ret < 0)
+ return 0;
+ } while (in_lock_functions(frame.pc));
- return pc;
+ return frame.pc;
}
EXPORT_SYMBOL(profile_pc);
#endif
#include <asm/system.h>
#include <asm/unistd.h>
#include <asm/traps.h>
+#include <asm/unwind.h>
#include "ptrace.h"
#include "signal.h"
dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
+#ifndef CONFIG_ARM_UNWIND
/*
* Stack pointers should always be within the kernels view of
* physical memory. If it is not there, then we can't dump
return 0;
}
+#endif
/*
* Dump out the contents of some memory nicely...
set_fs(fs);
}
+#ifdef CONFIG_ARM_UNWIND
+static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+ unwind_backtrace(regs, tsk);
+}
+#else
static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
{
- unsigned int fp;
+ unsigned int fp, mode;
int ok = 1;
printk("Backtrace: ");
- fp = regs->ARM_fp;
+
+ if (!tsk)
+ tsk = current;
+
+ if (regs) {
+ fp = regs->ARM_fp;
+ mode = processor_mode(regs);
+ } else if (tsk != current) {
+ fp = thread_saved_fp(tsk);
+ mode = 0x10;
+ } else {
+ asm("mov %0, fp" : "=r" (fp) : : "cc");
+ mode = 0x10;
+ }
+
if (!fp) {
printk("no frame pointer");
ok = 0;
printk("\n");
if (ok)
- c_backtrace(fp, processor_mode(regs));
+ c_backtrace(fp, mode);
}
+#endif
void dump_stack(void)
{
- __backtrace();
+ dump_backtrace(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
void show_stack(struct task_struct *tsk, unsigned long *sp)
{
- unsigned long fp;
-
- if (!tsk)
- tsk = current;
-
- if (tsk != current)
- fp = thread_saved_fp(tsk);
- else
- asm("mov %0, fp" : "=r" (fp) : : "cc");
-
- c_backtrace(fp, 0x10);
+ dump_backtrace(NULL, tsk);
barrier();
}
--- /dev/null
+/*
+ * arch/arm/kernel/unwind.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Stack unwinding support for ARM
+ *
+ * An ARM EABI version of gcc is required to generate the unwind
+ * tables. For information about the structure of the unwind tables,
+ * see "Exception Handling ABI for the ARM Architecture" at:
+ *
+ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#include <asm/stacktrace.h>
+#include <asm/traps.h>
+#include <asm/unwind.h>
+
+/* Dummy functions to avoid linker complaints */
+void __aeabi_unwind_cpp_pr0(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr0);
+
+void __aeabi_unwind_cpp_pr1(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr1);
+
+void __aeabi_unwind_cpp_pr2(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
+
+struct unwind_ctrl_block {
+ unsigned long vrs[16]; /* virtual register set */
+ unsigned long *insn; /* pointer to the current instructions word */
+ int entries; /* number of entries left to interpret */
+ int byte; /* current byte number in the instructions word */
+};
+
+enum regs {
+ FP = 11,
+ SP = 13,
+ LR = 14,
+ PC = 15
+};
+
+extern struct unwind_idx __start_unwind_idx[];
+extern struct unwind_idx __stop_unwind_idx[];
+
+static DEFINE_SPINLOCK(unwind_lock);
+static LIST_HEAD(unwind_tables);
+
+/* Convert a prel31 symbol to an absolute address */
+#define prel31_to_addr(ptr) \
+({ \
+ /* sign-extend to 32 bits */ \
+ long offset = (((long)*(ptr)) << 1) >> 1; \
+ (unsigned long)(ptr) + offset; \
+})
+
+/*
+ * Binary search in the unwind index. The entries entries are
+ * guaranteed to be sorted in ascending order by the linker.
+ */
+static struct unwind_idx *search_index(unsigned long addr,
+ struct unwind_idx *first,
+ struct unwind_idx *last)
+{
+ pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+
+ if (addr < first->addr) {
+ pr_warning("unwind: Unknown symbol address %08lx\n", addr);
+ return NULL;
+ } else if (addr >= last->addr)
+ return last;
+
+ while (first < last - 1) {
+ struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+
+ if (addr < mid->addr)
+ last = mid;
+ else
+ first = mid;
+ }
+
+ return first;
+}
+
+static struct unwind_idx *unwind_find_idx(unsigned long addr)
+{
+ struct unwind_idx *idx = NULL;
+ unsigned long flags;
+
+ pr_debug("%s(%08lx)\n", __func__, addr);
+
+ if (core_kernel_text(addr))
+ /* main unwind table */
+ idx = search_index(addr, __start_unwind_idx,
+ __stop_unwind_idx - 1);
+ else {
+ /* module unwind tables */
+ struct unwind_table *table;
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_for_each_entry(table, &unwind_tables, list) {
+ if (addr >= table->begin_addr &&
+ addr < table->end_addr) {
+ idx = search_index(addr, table->start,
+ table->stop - 1);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&unwind_lock, flags);
+ }
+
+ pr_debug("%s: idx = %p\n", __func__, idx);
+ return idx;
+}
+
+static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl)
+{
+ unsigned long ret;
+
+ if (ctrl->entries <= 0) {
+ pr_warning("unwind: Corrupt unwind table\n");
+ return 0;
+ }
+
+ ret = (*ctrl->insn >> (ctrl->byte * 8)) & 0xff;
+
+ if (ctrl->byte == 0) {
+ ctrl->insn++;
+ ctrl->entries--;
+ ctrl->byte = 3;
+ } else
+ ctrl->byte--;
+
+ return ret;
+}
+
+/*
+ * Execute the current unwind instruction.
+ */
+static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
+{
+ unsigned long insn = unwind_get_byte(ctrl);
+
+ pr_debug("%s: insn = %08lx\n", __func__, insn);
+
+ if ((insn & 0xc0) == 0x00)
+ ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
+ else if ((insn & 0xc0) == 0x40)
+ ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
+ else if ((insn & 0xf0) == 0x80) {
+ unsigned long mask;
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int load_sp, reg = 4;
+
+ insn = (insn << 8) | unwind_get_byte(ctrl);
+ mask = insn & 0x0fff;
+ if (mask == 0) {
+ pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n",
+ insn);
+ return -URC_FAILURE;
+ }
+
+ /* pop R4-R15 according to mask */
+ load_sp = mask & (1 << (13 - 4));
+ while (mask) {
+ if (mask & 1)
+ ctrl->vrs[reg] = *vsp++;
+ mask >>= 1;
+ reg++;
+ }
+ if (!load_sp)
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if ((insn & 0xf0) == 0x90 &&
+ (insn & 0x0d) != 0x0d)
+ ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
+ else if ((insn & 0xf0) == 0xa0) {
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int reg;
+
+ /* pop R4-R[4+bbb] */
+ for (reg = 4; reg <= 4 + (insn & 7); reg++)
+ ctrl->vrs[reg] = *vsp++;
+ if (insn & 0x80)
+ ctrl->vrs[14] = *vsp++;
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if (insn == 0xb0) {
+ ctrl->vrs[PC] = ctrl->vrs[LR];
+ /* no further processing */
+ ctrl->entries = 0;
+ } else if (insn == 0xb1) {
+ unsigned long mask = unwind_get_byte(ctrl);
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int reg = 0;
+
+ if (mask == 0 || mask & 0xf0) {
+ pr_warning("unwind: Spare encoding %04lx\n",
+ (insn << 8) | mask);
+ return -URC_FAILURE;
+ }
+
+ /* pop R0-R3 according to mask */
+ while (mask) {
+ if (mask & 1)
+ ctrl->vrs[reg] = *vsp++;
+ mask >>= 1;
+ reg++;
+ }
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if (insn == 0xb2) {
+ unsigned long uleb128 = unwind_get_byte(ctrl);
+
+ ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
+ } else {
+ pr_warning("unwind: Unhandled instruction %02lx\n", insn);
+ return -URC_FAILURE;
+ }
+
+ pr_debug("%s: fp = %08lx sp = %08lx lr = %08lx pc = %08lx\n", __func__,
+ ctrl->vrs[FP], ctrl->vrs[SP], ctrl->vrs[LR], ctrl->vrs[PC]);
+
+ return URC_OK;
+}
+
+/*
+ * Unwind a single frame starting with *sp for the symbol at *pc. It
+ * updates the *pc and *sp with the new values.
+ */
+int unwind_frame(struct stackframe *frame)
+{
+ unsigned long high, low;
+ struct unwind_idx *idx;
+ struct unwind_ctrl_block ctrl;
+
+ /* only go to a higher address on the stack */
+ low = frame->sp;
+ high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+
+ pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
+ frame->pc, frame->lr, frame->sp);
+
+ if (!kernel_text_address(frame->pc))
+ return -URC_FAILURE;
+
+ idx = unwind_find_idx(frame->pc);
+ if (!idx) {
+ pr_warning("unwind: Index not found %08lx\n", frame->pc);
+ return -URC_FAILURE;
+ }
+
+ ctrl.vrs[FP] = frame->fp;
+ ctrl.vrs[SP] = frame->sp;
+ ctrl.vrs[LR] = frame->lr;
+ ctrl.vrs[PC] = 0;
+
+ if (idx->insn == 1)
+ /* can't unwind */
+ return -URC_FAILURE;
+ else if ((idx->insn & 0x80000000) == 0)
+ /* prel31 to the unwind table */
+ ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
+ else if ((idx->insn & 0xff000000) == 0x80000000)
+ /* only personality routine 0 supported in the index */
+ ctrl.insn = &idx->insn;
+ else {
+ pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n",
+ idx->insn, idx);
+ return -URC_FAILURE;
+ }
+
+ /* check the personality routine */
+ if ((*ctrl.insn & 0xff000000) == 0x80000000) {
+ ctrl.byte = 2;
+ ctrl.entries = 1;
+ } else if ((*ctrl.insn & 0xff000000) == 0x81000000) {
+ ctrl.byte = 1;
+ ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16);
+ } else {
+ pr_warning("unwind: Unsupported personality routine %08lx at %p\n",
+ *ctrl.insn, ctrl.insn);
+ return -URC_FAILURE;
+ }
+
+ while (ctrl.entries > 0) {
+ int urc;
+
+ if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
+ return -URC_FAILURE;
+ urc = unwind_exec_insn(&ctrl);
+ if (urc < 0)
+ return urc;
+ }
+
+ if (ctrl.vrs[PC] == 0)
+ ctrl.vrs[PC] = ctrl.vrs[LR];
+
+ frame->fp = ctrl.vrs[FP];
+ frame->sp = ctrl.vrs[SP];
+ frame->lr = ctrl.vrs[LR];
+ frame->pc = ctrl.vrs[PC];
+
+ return URC_OK;
+}
+
+void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+ struct stackframe frame;
+ unsigned long high, low;
+ register unsigned long current_sp asm ("sp");
+
+ pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+ if (!tsk)
+ tsk = current;
+
+ if (regs) {
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ } else if (tsk == current) {
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)unwind_backtrace;
+ } else {
+ /* task blocked in __switch_to */
+ frame.fp = thread_saved_fp(tsk);
+ frame.sp = thread_saved_sp(tsk);
+ /*
+ * The function calling __switch_to cannot be a leaf function
+ * so LR is recovered from the stack.
+ */
+ frame.lr = 0;
+ frame.pc = thread_saved_pc(tsk);
+ }
+
+ low = frame.sp & ~(THREAD_SIZE - 1);
+ high = low + THREAD_SIZE;
+
+ while (1) {
+ int urc;
+ unsigned long where = frame.pc;
+
+ urc = unwind_frame(&frame);
+ if (urc < 0)
+ break;
+ dump_backtrace_entry(where, frame.pc, frame.sp - 4);
+ }
+}
+
+struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
+ unsigned long text_addr,
+ unsigned long text_size)
+{
+ unsigned long flags;
+ struct unwind_idx *idx;
+ struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
+
+ pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
+ text_addr, text_size);
+
+ if (!tab)
+ return tab;
+
+ tab->start = (struct unwind_idx *)start;
+ tab->stop = (struct unwind_idx *)(start + size);
+ tab->begin_addr = text_addr;
+ tab->end_addr = text_addr + text_size;
+
+ /* Convert the symbol addresses to absolute values */
+ for (idx = tab->start; idx < tab->stop; idx++)
+ idx->addr = prel31_to_addr(&idx->addr);
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_add_tail(&tab->list, &unwind_tables);
+ spin_unlock_irqrestore(&unwind_lock, flags);
+
+ return tab;
+}
+
+void unwind_table_del(struct unwind_table *tab)
+{
+ unsigned long flags;
+
+ if (!tab)
+ return;
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_del(&tab->list);
+ spin_unlock_irqrestore(&unwind_lock, flags);
+
+ kfree(tab);
+}
+
+int __init unwind_init(void)
+{
+ struct unwind_idx *idx;
+
+ /* Convert the symbol addresses to absolute values */
+ for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
+ idx->addr = prel31_to_addr(&idx->addr);
+
+ pr_debug("unwind: ARM stack unwinding initialised\n");
+
+ return 0;
+}
EXIT_TEXT
EXIT_DATA
*(.exitcall.exit)
+ *(.ARM.exidx.exit.text)
+ *(.ARM.extab.exit.text)
#ifndef CONFIG_MMU
*(.fixup)
*(__ex_table)
_etext = .; /* End of text and rodata section */
+#ifdef CONFIG_ARM_UNWIND
+ /*
+ * Stack unwinding tables
+ */
+ . = ALIGN(8);
+ .ARM.unwind_idx : {
+ __start_unwind_idx = .;
+ *(.ARM.exidx*)
+ __stop_unwind_idx = .;
+ }
+ .ARM.unwind_tab : {
+ __start_unwind_tab = .;
+ *(.ARM.extab*)
+ __stop_unwind_tab = .;
+ }
+#endif
+
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
. = PAGE_OFFSET + TEXT_OFFSET;
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
at91_add_device_i2c(NULL, 0);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* PCK0 provides MCLK to the WM8731 */
+ at91_set_B_periph(AT91_PIN_PC1, 0);
+ /* SSC (for WM8731) */
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
struct at91_gpio_bank {
- unsigned chipbase; /* bank's first GPIO number */
- void __iomem *regbase; /* base of register bank */
- struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
unsigned short id; /* peripheral ID */
unsigned long offset; /* offset from system peripheral base */
struct clk *clock; /* associated clock */
#include <mach/at91_pio.h>
#include <mach/gpio.h>
+#include <asm/gpio.h>
+
#include "generic.h"
+struct at91_gpio_chip {
+ struct gpio_chip chip;
+ struct at91_gpio_chip *next; /* Bank sharing same clock */
+ struct at91_gpio_bank *bank; /* Bank definition */
+ void __iomem *regbase; /* Base of register bank */
+};
-static struct at91_gpio_bank *gpio;
-static int gpio_banks;
+#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val);
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset);
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
+
+#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \
+ { \
+ .chip = { \
+ .label = name, \
+ .request = at91_gpiolib_request, \
+ .direction_input = at91_gpiolib_direction_input, \
+ .direction_output = at91_gpiolib_direction_output, \
+ .get = at91_gpiolib_get, \
+ .set = at91_gpiolib_set, \
+ .dbg_show = at91_gpiolib_dbg_show, \
+ .base = base_gpio, \
+ .ngpio = nr_gpio, \
+ }, \
+ }
+
+static struct at91_gpio_chip gpio_chip[] = {
+ AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
+};
+static int gpio_banks;
static inline void __iomem *pin_to_controller(unsigned pin)
{
pin -= PIN_BASE;
pin /= 32;
if (likely(pin < gpio_banks))
- return gpio[pin].regbase;
+ return gpio_chip[pin].regbase;
return NULL;
}
}
EXPORT_SYMBOL(at91_set_multi_drive);
-/*--------------------------------------------------------------------------*/
-
-/* new-style GPIO calls; these expect at91_set_GPIO_periph to have been
- * called, and maybe at91_set_multi_drive() for putout pins.
- */
-
-int gpio_direction_input(unsigned pin)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
- return -EINVAL;
- __raw_writel(mask, pio + PIO_ODR);
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned pin, int value)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
- return -EINVAL;
- __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
- __raw_writel(mask, pio + PIO_OER);
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-/*--------------------------------------------------------------------------*/
-
/*
* assuming the pin is muxed as a gpio output, set its value.
*/
else
wakeups[bank] &= ~mask;
- set_irq_wake(gpio[bank].id, state);
+ set_irq_wake(gpio_chip[bank].bank->id, state);
return 0;
}
int i;
for (i = 0; i < gpio_banks; i++) {
- void __iomem *pio = gpio[i].regbase;
+ void __iomem *pio = gpio_chip[i].regbase;
backups[i] = __raw_readl(pio + PIO_IMR);
__raw_writel(backups[i], pio + PIO_IDR);
__raw_writel(wakeups[i], pio + PIO_IER);
if (!wakeups[i])
- clk_disable(gpio[i].clock);
+ clk_disable(gpio_chip[i].bank->clock);
else {
#ifdef CONFIG_PM_DEBUG
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
int i;
for (i = 0; i < gpio_banks; i++) {
- void __iomem *pio = gpio[i].regbase;
+ void __iomem *pio = gpio_chip[i].regbase;
if (!wakeups[i])
- clk_enable(gpio[i].clock);
+ clk_enable(gpio_chip[i].bank->clock);
__raw_writel(wakeups[i], pio + PIO_IDR);
__raw_writel(backups[i], pio + PIO_IER);
{
unsigned pin;
struct irq_desc *gpio;
- struct at91_gpio_bank *bank;
+ struct at91_gpio_chip *at91_gpio;
void __iomem *pio;
u32 isr;
- bank = get_irq_chip_data(irq);
- pio = bank->regbase;
+ at91_gpio = get_irq_chip_data(irq);
+ pio = at91_gpio->regbase;
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
*/
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
if (!isr) {
- if (!bank->next)
+ if (!at91_gpio->next)
break;
- bank = bank->next;
- pio = bank->regbase;
+ at91_gpio = at91_gpio->next;
+ pio = at91_gpio->regbase;
continue;
}
- pin = bank->chipbase;
+ pin = at91_gpio->chip.base;
gpio = &irq_desc[pin];
while (isr) {
void __init at91_gpio_irq_setup(void)
{
unsigned pioc, pin;
- struct at91_gpio_bank *this, *prev;
+ struct at91_gpio_chip *this, *prev;
- for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
+ for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
pioc++ < gpio_banks;
prev = this, this++) {
- unsigned id = this->id;
+ unsigned id = this->bank->id;
unsigned i;
__raw_writel(~0, this->regbase + PIO_IDR);
- for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+ for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
/*
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
}
+/* gpiolib support */
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + PIO_ODR);
+ return 0;
+}
+
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+ __raw_writel(mask, pio + PIO_OER);
+ return 0;
+}
+
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+ u32 pdsr;
+
+ pdsr = __raw_readl(pio + PIO_PDSR);
+ return (pdsr & mask) != 0;
+}
+
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+}
+
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned pin = chip->base + offset;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ /* Cannot request GPIOs that are in alternate function mode */
+ if (!(__raw_readl(pio + PIO_PSR) & mask))
+ return -EPERM;
+
+ return 0;
+}
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ int i;
+
+ for (i = 0; i < chip->ngpio; i++) {
+ unsigned pin = chip->base + i;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+ const char *gpio_label;
+
+ gpio_label = gpiochip_is_requested(chip, i);
+ if (gpio_label) {
+ seq_printf(s, "[%s] GPIO%s%d: ",
+ gpio_label, chip->label, i);
+ if (__raw_readl(pio + PIO_PSR) & mask)
+ seq_printf(s, "[gpio] %s\n",
+ at91_get_gpio_value(pin) ?
+ "set" : "clear");
+ else
+ seq_printf(s, "[periph %s]\n",
+ __raw_readl(pio + PIO_ABSR) &
+ mask ? "B" : "A");
+ }
+ }
+}
+
/*
* Called from the processor-specific init to enable GPIO pin support.
*/
void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
{
unsigned i;
- struct at91_gpio_bank *last;
+ struct at91_gpio_chip *at91_gpio, *last = NULL;
BUG_ON(nr_banks > MAX_GPIO_BANKS);
- gpio = data;
gpio_banks = nr_banks;
- for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
- data->chipbase = PIN_BASE + i * 32;
- data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
+ for (i = 0; i < nr_banks; i++) {
+ at91_gpio = &gpio_chip[i];
+
+ at91_gpio->bank = &data[i];
+ at91_gpio->chip.base = PIN_BASE + i * 32;
+ at91_gpio->regbase = at91_gpio->bank->offset +
+ (void __iomem *)AT91_VA_BASE_SYS;
/* enable PIO controller's clock */
- clk_enable(data->clock);
+ clk_enable(at91_gpio->bank->clock);
- /*
- * Some processors share peripheral ID between multiple GPIO banks.
- * SAM9263 (PIOC, PIOD, PIOE)
- * CAP9 (PIOA, PIOB, PIOC, PIOD)
- */
- if (last && last->id == data->id)
- last->next = data;
+ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+ if (last && last->bank->id == at91_gpio->bank->id)
+ last->next = at91_gpio;
+ last = at91_gpio;
+
+ gpiochip_add(&at91_gpio->chip);
}
}
*/
#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- might_sleep();
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- at91_set_gpio_value(gpio, value);
-}
-
#include <asm-generic/gpio.h> /* cansleep wrappers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
void (*at91_arch_reset)(void);
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/* call the CPU-specific reset function */
if (at91_arch_reset)
mov r0, r0");
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
cpu_do_idle();
}
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
{
davinci_watchdog_reset();
}
asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
}
-#define arch_reset(mode) cpu_reset(0x80000000)
+#define arch_reset(mode, cmd) cpu_reset(0x80000000)
#endif
#
# Makefile for the linux kernel.
#
-obj-y := core.o clock.o gpio.o
+obj-y := core.o clock.o dma-m2p.o gpio.o
obj-m :=
obj-n :=
obj- :=
.enable_mask = EP93XX_SYSCON_CLOCK_USH_EN,
};
+/* DMA Clocks */
+static struct clk clk_m2p0 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00020000,
+};
+static struct clk clk_m2p1 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00010000,
+};
+static struct clk clk_m2p2 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00080000,
+};
+static struct clk clk_m2p3 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00040000,
+};
+static struct clk clk_m2p4 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00200000,
+};
+static struct clk clk_m2p5 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00100000,
+};
+static struct clk clk_m2p6 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00800000,
+};
+static struct clk clk_m2p7 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00400000,
+};
+static struct clk clk_m2p8 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x02000000,
+};
+static struct clk clk_m2p9 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x01000000,
+};
+static struct clk clk_m2m0 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x04000000,
+};
+static struct clk clk_m2m1 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x08000000,
+};
+
#define INIT_CK(dev,con,ck) \
{ .dev_id = dev, .con_id = con, .clk = ck }
INIT_CK(NULL, "pclk", &clk_p),
INIT_CK(NULL, "pll2", &clk_pll2),
INIT_CK(NULL, "usb_host", &clk_usb_host),
+ INIT_CK(NULL, "m2p0", &clk_m2p0),
+ INIT_CK(NULL, "m2p1", &clk_m2p1),
+ INIT_CK(NULL, "m2p2", &clk_m2p2),
+ INIT_CK(NULL, "m2p3", &clk_m2p3),
+ INIT_CK(NULL, "m2p4", &clk_m2p4),
+ INIT_CK(NULL, "m2p5", &clk_m2p5),
+ INIT_CK(NULL, "m2p6", &clk_m2p6),
+ INIT_CK(NULL, "m2p7", &clk_m2p7),
+ INIT_CK(NULL, "m2p8", &clk_m2p8),
+ INIT_CK(NULL, "m2p9", &clk_m2p9),
+ INIT_CK(NULL, "m2m0", &clk_m2m0),
+ INIT_CK(NULL, "m2m1", &clk_m2m1),
};
return (unsigned long)rate;
}
+static void __init ep93xx_dma_clock_init(void)
+{
+ clk_m2p0.rate = clk_h.rate;
+ clk_m2p1.rate = clk_h.rate;
+ clk_m2p2.rate = clk_h.rate;
+ clk_m2p3.rate = clk_h.rate;
+ clk_m2p4.rate = clk_h.rate;
+ clk_m2p5.rate = clk_h.rate;
+ clk_m2p6.rate = clk_h.rate;
+ clk_m2p7.rate = clk_h.rate;
+ clk_m2p8.rate = clk_h.rate;
+ clk_m2p9.rate = clk_h.rate;
+ clk_m2m0.rate = clk_h.rate;
+ clk_m2m1.rate = clk_h.rate;
+}
+
static int __init ep93xx_clock_init(void)
{
u32 value;
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
+ ep93xx_dma_clock_init();
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
--- /dev/null
+/*
+ * arch/arm/mach-ep93xx/dma-m2p.c
+ * M2P DMA handling for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2006 Applied Data Systems
+ *
+ * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+/*
+ * On the EP93xx chip the following peripherals my be allocated to the 10
+ * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
+ *
+ * I2S contains 3 Tx and 3 Rx DMA Channels
+ * AAC contains 3 Tx and 3 Rx DMA Channels
+ * UART1 contains 1 Tx and 1 Rx DMA Channels
+ * UART2 contains 1 Tx and 1 Rx DMA Channels
+ * UART3 contains 1 Tx and 1 Rx DMA Channels
+ * IrDA contains 1 Tx and 1 Rx DMA Channels
+ *
+ * SSP and IDE use the Memory to Memory (M2M) channels and are not covered
+ * with this implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <mach/dma.h>
+#include <mach/hardware.h>
+
+#define M2P_CONTROL 0x00
+#define M2P_CONTROL_STALL_IRQ_EN (1 << 0)
+#define M2P_CONTROL_NFB_IRQ_EN (1 << 1)
+#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3)
+#define M2P_CONTROL_ENABLE (1 << 4)
+#define M2P_INTERRUPT 0x04
+#define M2P_INTERRUPT_STALL (1 << 0)
+#define M2P_INTERRUPT_NFB (1 << 1)
+#define M2P_INTERRUPT_ERROR (1 << 3)
+#define M2P_PPALLOC 0x08
+#define M2P_STATUS 0x0c
+#define M2P_REMAIN 0x14
+#define M2P_MAXCNT0 0x20
+#define M2P_BASE0 0x24
+#define M2P_MAXCNT1 0x30
+#define M2P_BASE1 0x34
+
+#define STATE_IDLE 0 /* Channel is inactive. */
+#define STATE_STALL 1 /* Channel is active, no buffers pending. */
+#define STATE_ON 2 /* Channel is active, one buffer pending. */
+#define STATE_NEXT 3 /* Channel is active, two buffers pending. */
+
+struct m2p_channel {
+ char *name;
+ void __iomem *base;
+ int irq;
+
+ struct clk *clk;
+ spinlock_t lock;
+
+ void *client;
+ unsigned next_slot:1;
+ struct ep93xx_dma_buffer *buffer_xfer;
+ struct ep93xx_dma_buffer *buffer_next;
+ struct list_head buffers_pending;
+};
+
+static struct m2p_channel m2p_rx[] = {
+ {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1},
+ {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3},
+ {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5},
+ {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7},
+ {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9},
+ {NULL},
+};
+
+static struct m2p_channel m2p_tx[] = {
+ {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0},
+ {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2},
+ {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4},
+ {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6},
+ {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8},
+ {NULL},
+};
+
+static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf)
+{
+ if (ch->next_slot == 0) {
+ writel(buf->size, ch->base + M2P_MAXCNT0);
+ writel(buf->bus_addr, ch->base + M2P_BASE0);
+ } else {
+ writel(buf->size, ch->base + M2P_MAXCNT1);
+ writel(buf->bus_addr, ch->base + M2P_BASE1);
+ }
+ ch->next_slot ^= 1;
+}
+
+static void choose_buffer_xfer(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_buffer *buf;
+
+ ch->buffer_xfer = NULL;
+ if (!list_empty(&ch->buffers_pending)) {
+ buf = list_entry(ch->buffers_pending.next,
+ struct ep93xx_dma_buffer, list);
+ list_del(&buf->list);
+ feed_buf(ch, buf);
+ ch->buffer_xfer = buf;
+ }
+}
+
+static void choose_buffer_next(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_buffer *buf;
+
+ ch->buffer_next = NULL;
+ if (!list_empty(&ch->buffers_pending)) {
+ buf = list_entry(ch->buffers_pending.next,
+ struct ep93xx_dma_buffer, list);
+ list_del(&buf->list);
+ feed_buf(ch, buf);
+ ch->buffer_next = buf;
+ }
+}
+
+static inline void m2p_set_control(struct m2p_channel *ch, u32 v)
+{
+ /*
+ * The control register must be read immediately after being written so
+ * that the internal state machine is correctly updated. See the ep93xx
+ * users' guide for details.
+ */
+ writel(v, ch->base + M2P_CONTROL);
+ readl(ch->base + M2P_CONTROL);
+}
+
+static inline int m2p_channel_state(struct m2p_channel *ch)
+{
+ return (readl(ch->base + M2P_STATUS) >> 4) & 0x3;
+}
+
+static irqreturn_t m2p_irq(int irq, void *dev_id)
+{
+ struct m2p_channel *ch = dev_id;
+ struct ep93xx_dma_m2p_client *cl;
+ u32 irq_status, v;
+ int error = 0;
+
+ cl = ch->client;
+
+ spin_lock(&ch->lock);
+ irq_status = readl(ch->base + M2P_INTERRUPT);
+
+ if (irq_status & M2P_INTERRUPT_ERROR) {
+ writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT);
+ error = 1;
+ }
+
+ if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) {
+ spin_unlock(&ch->lock);
+ return IRQ_NONE;
+ }
+
+ switch (m2p_channel_state(ch)) {
+ case STATE_IDLE:
+ pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+ BUG();
+ break;
+
+ case STATE_STALL:
+ cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+ if (ch->buffer_next != NULL) {
+ cl->buffer_finished(cl->cookie, ch->buffer_next,
+ 0, error);
+ }
+ choose_buffer_xfer(ch);
+ choose_buffer_next(ch);
+ if (ch->buffer_xfer != NULL)
+ cl->buffer_started(cl->cookie, ch->buffer_xfer);
+ break;
+
+ case STATE_ON:
+ cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+ ch->buffer_xfer = ch->buffer_next;
+ choose_buffer_next(ch);
+ cl->buffer_started(cl->cookie, ch->buffer_xfer);
+ break;
+
+ case STATE_NEXT:
+ pr_crit("m2p_irq: dma interrupt while next\n");
+ BUG();
+ break;
+ }
+
+ v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN |
+ M2P_CONTROL_NFB_IRQ_EN);
+ if (ch->buffer_xfer != NULL)
+ v |= M2P_CONTROL_STALL_IRQ_EN;
+ if (ch->buffer_next != NULL)
+ v |= M2P_CONTROL_NFB_IRQ_EN;
+ m2p_set_control(ch, v);
+
+ spin_unlock(&ch->lock);
+ return IRQ_HANDLED;
+}
+
+static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch;
+ int i;
+
+ if (cl->flags & EP93XX_DMA_M2P_RX)
+ ch = m2p_rx;
+ else
+ ch = m2p_tx;
+
+ for (i = 0; ch[i].base; i++) {
+ struct ep93xx_dma_m2p_client *client;
+
+ client = ch[i].client;
+ if (client != NULL) {
+ int port;
+
+ port = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+ if (port == (client->flags &
+ EP93XX_DMA_M2P_PORT_MASK)) {
+ pr_warning("DMA channel already used by %s\n",
+ cl->name ? : "unknown client");
+ return ERR_PTR(-EBUSY);
+ }
+ }
+ }
+
+ for (i = 0; ch[i].base; i++) {
+ if (ch[i].client == NULL)
+ return ch + i;
+ }
+
+ pr_warning("No free DMA channel for %s\n",
+ cl->name ? : "unknown client");
+ return ERR_PTR(-ENODEV);
+}
+
+static void channel_enable(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_m2p_client *cl = ch->client;
+ u32 v;
+
+ clk_enable(ch->clk);
+
+ v = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+ writel(v, ch->base + M2P_PPALLOC);
+
+ v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK;
+ v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN;
+ m2p_set_control(ch, v);
+}
+
+static void channel_disable(struct m2p_channel *ch)
+{
+ u32 v;
+
+ v = readl(ch->base + M2P_CONTROL);
+ v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
+ m2p_set_control(ch, v);
+
+ while (m2p_channel_state(ch) == STATE_ON)
+ cpu_relax();
+
+ m2p_set_control(ch, 0x0);
+
+ while (m2p_channel_state(ch) == STATE_STALL)
+ cpu_relax();
+
+ clk_disable(ch->clk);
+}
+
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch;
+ int err;
+
+ ch = find_free_channel(cl);
+ if (IS_ERR(ch))
+ return PTR_ERR(ch);
+
+ err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch);
+ if (err)
+ return err;
+
+ ch->client = cl;
+ ch->next_slot = 0;
+ ch->buffer_xfer = NULL;
+ ch->buffer_next = NULL;
+ INIT_LIST_HEAD(&ch->buffers_pending);
+
+ cl->channel = ch;
+
+ channel_enable(ch);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register);
+
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ channel_disable(ch);
+ free_irq(ch->irq, ch);
+ ch->client = NULL;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister);
+
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl,
+ struct ep93xx_dma_buffer *buf)
+{
+ struct m2p_channel *ch = cl->channel;
+ unsigned long flags;
+ u32 v;
+
+ spin_lock_irqsave(&ch->lock, flags);
+ v = readl(ch->base + M2P_CONTROL);
+ if (ch->buffer_xfer == NULL) {
+ ch->buffer_xfer = buf;
+ feed_buf(ch, buf);
+ cl->buffer_started(cl->cookie, buf);
+
+ v |= M2P_CONTROL_STALL_IRQ_EN;
+ m2p_set_control(ch, v);
+
+ } else if (ch->buffer_next == NULL) {
+ ch->buffer_next = buf;
+ feed_buf(ch, buf);
+
+ v |= M2P_CONTROL_NFB_IRQ_EN;
+ m2p_set_control(ch, v);
+ } else {
+ list_add_tail(&buf->list, &ch->buffers_pending);
+ }
+ spin_unlock_irqrestore(&ch->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit);
+
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl,
+ struct ep93xx_dma_buffer *buf)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ list_add_tail(&buf->list, &ch->buffers_pending);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive);
+
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ channel_disable(ch);
+ ch->next_slot = 0;
+ ch->buffer_xfer = NULL;
+ ch->buffer_next = NULL;
+ INIT_LIST_HEAD(&ch->buffers_pending);
+ channel_enable(ch);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush);
+
+static int init_channel(struct m2p_channel *ch)
+{
+ ch->clk = clk_get(NULL, ch->name);
+ if (IS_ERR(ch->clk))
+ return PTR_ERR(ch->clk);
+
+ spin_lock_init(&ch->lock);
+ ch->client = NULL;
+
+ return 0;
+}
+
+static int __init ep93xx_dma_m2p_init(void)
+{
+ int i;
+ int ret;
+
+ for (i = 0; m2p_rx[i].base; i++) {
+ ret = init_channel(m2p_rx + i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; m2p_tx[i].base; i++) {
+ ret = init_channel(m2p_tx + i);
+ if (ret)
+ return ret;
+ }
+
+ pr_info("M2P DMA subsystem initialized\n");
+ return 0;
+}
+arch_initcall(ep93xx_dma_m2p_init);
.phy_id = 1,
};
+static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
+ {
+ /* On-board battery backed RTC */
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+ /*
+ * The I2C signals are also routed to the Expansion Connector (J4)
+ */
+};
+
static void __init edb9307a_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9307a_flash);
ep93xx_register_eth(&edb9307a_eth_data, 1);
+
+ ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
}
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
--- /dev/null
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+
+struct ep93xx_dma_buffer {
+ struct list_head list;
+ u32 bus_addr;
+ u16 size;
+};
+
+struct ep93xx_dma_m2p_client {
+ char *name;
+ u8 flags;
+ void *cookie;
+ void (*buffer_started)(void *cookie,
+ struct ep93xx_dma_buffer *buf);
+ void (*buffer_finished)(void *cookie,
+ struct ep93xx_dma_buffer *buf,
+ int bytes, int error);
+
+ /* Internal to the DMA code. */
+ void *channel;
+};
+
+#define EP93XX_DMA_M2P_PORT_I2S1 0x00
+#define EP93XX_DMA_M2P_PORT_I2S2 0x01
+#define EP93XX_DMA_M2P_PORT_AAC1 0x02
+#define EP93XX_DMA_M2P_PORT_AAC2 0x03
+#define EP93XX_DMA_M2P_PORT_AAC3 0x04
+#define EP93XX_DMA_M2P_PORT_I2S3 0x05
+#define EP93XX_DMA_M2P_PORT_UART1 0x06
+#define EP93XX_DMA_M2P_PORT_UART2 0x07
+#define EP93XX_DMA_M2P_PORT_UART3 0x08
+#define EP93XX_DMA_M2P_PORT_IRDA 0x09
+#define EP93XX_DMA_M2P_PORT_MASK 0x0f
+#define EP93XX_DMA_M2P_TX 0x00
+#define EP93XX_DMA_M2P_RX 0x10
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20
+#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
+#define EP93XX_DMA_M2P_ERROR_MASK 0x60
+
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
+ struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
+ struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
+
+#endif /* __ASM_ARCH_DMA_H */
/* AHB peripherals */
-#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
+#define EP93XX_DMA_BASE ((void __iomem *) \
+ (EP93XX_AHB_VIRT_BASE + 0x00000000))
#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
u32 devicecfg;
#include <asm/hardware/dec21285.h>
#if 0
-static int fb_dma_request(dmach_t channel, dma_t *dma)
+static int fb_dma_request(unsigned int chan, dma_t *dma)
{
return -EINVAL;
}
-static void fb_dma_enable(dmach_t channel, dma_t *dma)
+static void fb_dma_enable(unsigned int chan, dma_t *dma)
{
}
-static void fb_dma_disable(dmach_t channel, dma_t *dma)
+static void fb_dma_disable(unsigned int chan, dma_t *dma)
{
}
};
#endif
-void __init arch_dma_init(dma_t *dma)
+static int __init fb_dma_init(void)
{
#if 0
dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
#endif
#ifdef CONFIG_ISA_DMA
if (footbridge_cfn_mode())
- isa_init_dma(dma + _ISA_DMA(0));
+ isa_init_dma();
#endif
+ return 0;
}
+core_initcall(fb_dma_init);
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if (mode == 's') {
/*
}
-static __inline__ void arch_reset(char mode)
+static __inline__ void arch_reset(char mode, const char *cmd)
{
CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
}
}
static inline void
-arch_reset(char mode)
+arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* To reset, we hit the on-board reset register
})
#define __arch_page_to_dma(dev, page) \
- __arch_virt_to_dma(dev, page_address(page))
+ ({ \
+ /* __is_lbus_virt() can never be true for RAM pages */ \
+ (dma_addr_t)page_to_phys(page); \
+ })
#endif /* CONFIG_ARCH_IOP13XX */
#endif /* !ASSEMBLY */
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Reset the internal bus (warning both cores are reset)
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
local_irq_disable();
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
*IOP3XX_PCSR = 0x30;
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
local_irq_disable();
#endif
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/* First try machine specific support */
if (machine_is_ixdp2351()) {
}
void __init ixp4xx_pci_preinit(void)
-{
+{
unsigned long cpuid = read_cpuid_id();
/*
pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
- /*
+ /*
* We use identity AHB->PCI address translation
* in the 0x48000000 to 0x4bffffff address space
*/
*PCI_PCIMEMBASE = 0x48494A4B;
- /*
+ /*
* We also use identity PCI->AHB address translation
* in 4 16MB BARs that begin at the physical memory start
*/
- *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
+ *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
((PHYS_OFFSET & 0xFF000000) >> 8) +
((PHYS_OFFSET & 0xFF000000) >> 16) +
((PHYS_OFFSET & 0xFF000000) >> 24) +
pr_debug("setup BARs in controller\n");
/*
- * We configure the PCI inbound memory windows to be
+ * We configure the PCI inbound memory windows to be
* 1:1 mapped to SDRAM
*/
- local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000);
- local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000);
- local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000);
- local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000);
+ local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
+ local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
+ local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
+ local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M);
/*
- * Enable CSR window at 0xff000000.
+ * Enable CSR window at 64 MiB to allow PCI masters
+ * to continue prefetching past 64 MiB boundary.
*/
- local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008);
+ local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
/*
* Enable the IO window to be way up high, at 0xfffffc00
return 1;
}
-struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
{
return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
}
#include <asm/cputype.h>
/* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE 0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE 0x69054040
-#define IXP465_PROCESSOR_ID_VALUE 0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0
-
-#define cpu_is_ixp42x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP465_PROCESSOR_ID_VALUE)
+#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */
+#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0
+
+#define IXP43X_PROCESSOR_ID_VALUE 0x69054040
+#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0
+
+#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
+#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
+
+#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
+ IXP42X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
+ IXP43X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
+ IXP46X_PROCESSOR_ID_VALUE)
static inline u32 ixp4xx_read_feature_bits(void)
{
unsigned int val = ~*IXP4XX_EXP_CFG2;
- val &= ~IXP4XX_FEATURE_RESERVED;
- if (!cpu_is_ixp46x())
- val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
- return val;
+ if (cpu_is_ixp42x())
+ return val & IXP42X_FEATURE_MASK;
+ if (cpu_is_ixp43x())
+ return val & IXP43X_FEATURE_MASK;
+ return val & IXP46X_FEATURE_MASK;
}
static inline void ixp4xx_write_feature_bits(u32 value)
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
/* "fuse" bits of IXP_EXP_CFG2 */
+/* All IXP4xx CPUs */
#define IXP4XX_FEATURE_RCOMP (1 << 0)
#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
#define IXP4XX_FEATURE_HASH (1 << 2)
#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
#define IXP4XX_FEATURE_PCI (1 << 14)
-#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
+#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \
+ IXP4XX_FEATURE_USB_DEVICE | \
+ IXP4XX_FEATURE_HASH | \
+ IXP4XX_FEATURE_AES | \
+ IXP4XX_FEATURE_DES | \
+ IXP4XX_FEATURE_HDLC | \
+ IXP4XX_FEATURE_AAL | \
+ IXP4XX_FEATURE_HSS | \
+ IXP4XX_FEATURE_UTOPIA | \
+ IXP4XX_FEATURE_NPEB_ETH0 | \
+ IXP4XX_FEATURE_NPEC_ETH | \
+ IXP4XX_FEATURE_RESET_NPEA | \
+ IXP4XX_FEATURE_RESET_NPEB | \
+ IXP4XX_FEATURE_RESET_NPEC | \
+ IXP4XX_FEATURE_PCI | \
+ IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
+ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+
+/* IXP43x/46x CPUs */
+#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
#define IXP4XX_FEATURE_USB_HOST (1 << 18)
#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
+#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \
+ IXP4XX_FEATURE_ECC_TIMESYNC | \
+ IXP4XX_FEATURE_USB_HOST | \
+ IXP4XX_FEATURE_NPEA_ETH)
+
+/* IXP46x CPU (including IXP455) only */
#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
#define IXP4XX_FEATURE_RSA (1 << 21)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
-#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
-
-#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
- IXP4XX_FEATURE_USB_HOST | \
- IXP4XX_FEATURE_NPEA_ETH | \
- IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
- IXP4XX_FEATURE_RSA | \
- IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \
+ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
+ IXP4XX_FEATURE_RSA)
#endif
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if ( 1 && mode == 's') {
/* Jump into ROM at address 0 */
for (i = 0; i < image->size; i++)
image->data[i] = swab32(image->data[i]);
- if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
- print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+ if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
+ print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on "
"IXP42x\n");
goto err;
}
"revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
(image->id >> 8) & 0xFF, image->id & 0xFF);
- if (!cpu_is_ixp46x()) {
+ if (cpu_is_ixp42x()) {
if (!npe->id)
instr_size = NPE_A_42X_INSTR_SIZE;
else
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
+config MACH_SHEEVAPLUG
+ bool "Marvell SheevaPlug Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell SheevaPlug Reference Board.
+
+config MACH_TS219
+ bool "QNAP TS-119 and TS-219 Turbo NAS"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-119 and TS-219 Turbo NAS devices.
+
endmenu
endif
-obj-y += common.o addr-map.o irq.o pcie.o
+obj-y += common.o addr-map.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
+obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
+obj-$(CONFIG_MACH_TS219) += ts219-setup.o
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/spi/orion_spi.h>
#include <net/dsa.h>
#include <mach/kirkwood.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
+#include <plat/mvsdio.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
#include <plat/time.h>
.flags = IORESOURCE_MEM,
};
-void __init kirkwood_rtc_init(void)
+static void __init kirkwood_rtc_init(void)
{
platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
}
}
+/*****************************************************************************
+ * SD/SDIO/MMC
+ ****************************************************************************/
+static struct resource mvsdio_resources[] = {
+ [0] = {
+ .start = SDIO_PHYS_BASE,
+ .end = SDIO_PHYS_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KIRKWOOD_SDIO,
+ .end = IRQ_KIRKWOOD_SDIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 mvsdio_dmamask = 0xffffffffUL;
+
+static struct platform_device kirkwood_sdio = {
+ .name = "mvsdio",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mvsdio_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(mvsdio_resources),
+ .resource = mvsdio_resources,
+};
+
+void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (rev == 0) /* catch all Kirkwood Z0's */
+ mvsdio_data->clock = 100000000;
+ else
+ mvsdio_data->clock = 200000000;
+ mvsdio_data->dram = &kirkwood_mbus_dram_info;
+ kirkwood_sdio.dev.platform_data = mvsdio_data;
+ platform_device_register(&kirkwood_sdio);
+}
+
+
/*****************************************************************************
* SPI
****************************************************************************/
}
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource kirkwood_i2c_resources[] = {
+ {
+ .name = "i2c",
+ .start = I2C_PHYS_BASE,
+ .end = I2C_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c",
+ .start = IRQ_KIRKWOOD_TWSI,
+ .end = IRQ_KIRKWOOD_TWSI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_i2c = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(kirkwood_i2c_resources),
+ .resource = kirkwood_i2c_resources,
+ .dev = {
+ .platform_data = &kirkwood_i2c_pdata,
+ },
+};
+
+void __init kirkwood_i2c_init(void)
+{
+ platform_device_register(&kirkwood_i2c);
+}
+
+
/*****************************************************************************
* UART0
****************************************************************************/
},
};
-void __init kirkwood_xor0_init(void)
+static void __init kirkwood_xor0_init(void)
{
platform_device_register(&kirkwood_xor0_shared);
},
};
-void __init kirkwood_xor1_init(void)
+static void __init kirkwood_xor1_init(void)
{
platform_device_register(&kirkwood_xor1_shared);
#ifdef CONFIG_CACHE_FEROCEON_L2
kirkwood_l2_init();
#endif
+
+ /* internal devices that every board has */
+ kirkwood_rtc_init();
+ kirkwood_xor0_init();
+ kirkwood_xor1_init();
}
struct dsa_platform_data;
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
+struct mvsdio_platform_data;
/*
* Basic Kirkwood init functions used early by machine-setup.
void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
void kirkwood_pcie_init(void);
-void kirkwood_rtc_init(void);
void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
void kirkwood_spi_init(void);
+void kirkwood_i2c_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
-void kirkwood_xor0_init(void);
-void kirkwood_xor1_init(void);
+extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
+#include <plat/orion_nand.h>
+#include <plat/mvsdio.h>
#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition db88f6281_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct resource db88f6281_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data db88f6281_nand_data = {
+ .parts = db88f6281_nand_parts,
+ .nr_parts = ARRAY_SIZE(db88f6281_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+ .chip_delay = 25,
+};
+
+static struct platform_device db88f6281_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &db88f6281_nand_data,
+ },
+ .resource = &db88f6281_nand_resource,
+ .num_resources = 1,
+};
static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
.n_ports = 2,
};
+static struct mvsdio_platform_data db88f6281_mvsdio_data = {
+ .gpio_write_protect = 37,
+ .gpio_card_detect = 38,
+};
+
+static unsigned int db88f6281_mpp_config[] __initdata = {
+ MPP37_GPIO,
+ MPP38_GPIO,
+ 0
+};
+
static void __init db88f6281_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
+ kirkwood_mpp_conf(db88f6281_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&db88f6281_ge00_data);
- kirkwood_rtc_init();
kirkwood_sata_init(&db88f6281_sata_data);
kirkwood_uart0_init();
+ kirkwood_sdio_init(&db88f6281_mvsdio_data);
+
+ platform_device_register(&db88f6281_nand_flash);
}
static int __init db88f6281_pci_init(void)
#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+
#endif
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/mpp.c
+ *
+ * MPP functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init kirkwood_variant(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+ return MPP_F6281_MASK;
+ if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
+ return MPP_F6192_MASK;
+ if (dev == MV88F6180_DEV_ID)
+ return MPP_F6180_MASK;
+
+ printk(KERN_ERR "MPP setup: unknown kirkwood variant "
+ "(dev %#x rev %#x)\n", dev, rev);
+ return 0;
+}
+
+#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS (1 + MPP_MAX/8)
+
+void __init kirkwood_mpp_conf(unsigned int *mpp_list)
+{
+ u32 mpp_ctrl[MPP_NR_REGS];
+ unsigned int variant_mask;
+ int i;
+
+ variant_mask = kirkwood_variant();
+ if (!variant_mask)
+ return;
+
+ printk(KERN_DEBUG "initial MPP regs:");
+ for (i = 0; i < MPP_NR_REGS; i++) {
+ mpp_ctrl[i] = readl(MPP_CTRL(i));
+ printk(" %08x", mpp_ctrl[i]);
+ }
+ printk("\n");
+
+ while (*mpp_list) {
+ unsigned int num = MPP_NUM(*mpp_list);
+ unsigned int sel = MPP_SEL(*mpp_list);
+ int shift, gpio_mode;
+
+ if (num > MPP_MAX) {
+ printk(KERN_ERR "kirkwood_mpp_conf: invalid MPP "
+ "number (%u)\n", num);
+ continue;
+ }
+ if (!(*mpp_list & variant_mask)) {
+ printk(KERN_WARNING
+ "kirkwood_mpp_conf: requested MPP%u config "
+ "unavailable on this hardware\n", num);
+ continue;
+ }
+
+ shift = (num & 7) << 2;
+ mpp_ctrl[num / 8] &= ~(0xf << shift);
+ mpp_ctrl[num / 8] |= sel << shift;
+
+ gpio_mode = 0;
+ if (*mpp_list & MPP_INPUT_MASK)
+ gpio_mode |= GPIO_INPUT_OK;
+ if (*mpp_list & MPP_OUTPUT_MASK)
+ gpio_mode |= GPIO_OUTPUT_OK;
+ if (sel != 0)
+ gpio_mode = 0;
+ orion_gpio_set_valid(num, gpio_mode);
+
+ mpp_list++;
+ }
+
+ printk(KERN_DEBUG " final MPP regs:");
+ for (i = 0; i < MPP_NR_REGS; i++) {
+ writel(mpp_ctrl[i], MPP_CTRL(i));
+ printk(" %08x", mpp_ctrl[i]);
+ }
+ printk("\n");
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
+ *
+ * Copyright 2009: Marvell Technology Group Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __KIRKWOOD_MPP_H
+#define __KIRKWOOD_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+ /* MPP number */ ((_num) & 0xff) | \
+ /* MPP select value */ (((_sel) & 0xf) << 8) | \
+ /* may be input signal */ ((!!(_in)) << 12) | \
+ /* may be output signal */ ((!!(_out)) << 13) | \
+ /* available on F6180 */ ((!!(_F6180)) << 14) | \
+ /* available on F6190 */ ((!!(_F6190)) << 15) | \
+ /* available on F6192 */ ((!!(_F6192)) << 16) | \
+ /* available on F6281 */ ((!!(_F6281)) << 17))
+
+#define MPP_NUM(x) ((x) & 0xff)
+#define MPP_SEL(x) (((x) >> 8) & 0xf)
+
+ /* num sel i o 6180 6190 6192 6281 */
+
+#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0, 0, 0 )
+#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0, 0, 0 )
+
+#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0 )
+#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0 )
+#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0 )
+#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1 )
+
+#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP8_TW_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP9_TW_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1 )
+
+#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1 )
+
+#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1 )
+
+#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1 )
+
+#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1 )
+
+#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1 )
+
+#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP20_GE1_0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP20_AUDIO_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1 )
+
+#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP21_GE1_1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP21_AUDIO_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP22_GE1_2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP22_AUDIO_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1 )
+
+#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP23_GE1_3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP23_AUDIO_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP24_TDM_SPI_CS0 DEV( 24, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP24_GE1_4 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP24_AUDIO_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP25_GE1_5 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP25_AUDIO_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP26_GE1_6 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP26_AUDIO_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP27_GE1_7 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP27_AUDIO_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1 )
+
+#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1 )
+#define MPP28_GE1_8 MPP( 28, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP28_AUDIO_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1 )
+
+#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1 )
+#define MPP29_GE1_9 MPP( 29, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1 )
+#define MPP30_GE1_10 MPP( 30, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1 )
+#define MPP31_GE1_11 MPP( 31, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP32_GE1_12 MPP( 32, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP33_GPIO MPP( 33, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP33_GE1_13 MPP( 33, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP34_GE1_14 MPP( 34, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP35_GE1_15 MPP( 35, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1 )
+
+#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP36_AUDIO_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP37_AUDIO_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP38_AUDIO_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP39_AUDIO_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP40_AUDIO_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1 )
+#define MPP41_AUDIO_I2SLRC MPP( 41, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP42_AUDIO_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1 )
+#define MPP43_AUDIO_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1 )
+#define MPP44_AUDIO_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1 )
+
+#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1 )
+
+#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1 )
+
+#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 )
+
+#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1 )
+
+#define MPP_MAX 49
+
+void kirkwood_mpp_conf(unsigned int *mpp_list);
+
+#endif
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/spi/flash.h>
#include <linux/spi/orion_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
#include "common.h"
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6192_ge00_data);
- kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6192_sata_data);
spi_register_board_info(rd88F6192_spi_slave_info,
ARRAY_SIZE(rd88F6192_spi_slave_info));
kirkwood_spi_init();
kirkwood_uart0_init();
- kirkwood_xor0_init();
- kirkwood_xor1_init();
}
static int __init rd88f6192_pci_init(void)
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/pci.h>
#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
#include "common.h"
+#include "mpp.h"
static struct mtd_partition rd88f6281_nand_parts[] = {
{
.n_ports = 2,
};
+static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
+ .gpio_card_detect = 28,
+};
+
+static unsigned int rd88f6281_mpp_config[] __initdata = {
+ MPP28_GPIO,
+ 0
+};
+
static void __init rd88f6281_init(void)
{
u32 dev, rev;
* Basic setup. Needs to be called early.
*/
kirkwood_init();
+ kirkwood_mpp_conf(rd88f6281_mpp_config);
kirkwood_ehci_init();
}
kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
- kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6281_sata_data);
+ kirkwood_sdio_init(&rd88f6281_mvsdio_data);
kirkwood_uart0_init();
platform_device_register(&rd88f6281_nand_flash);
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/sheevaplug-setup.c
+ *
+ * Marvell SheevaPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include <plat/orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition sheevaplug_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct resource sheevaplug_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data sheevaplug_nand_data = {
+ .parts = sheevaplug_nand_parts,
+ .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+ .chip_delay = 25,
+};
+
+static struct platform_device sheevaplug_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &sheevaplug_nand_data,
+ },
+ .resource = &sheevaplug_nand_resource,
+ .num_resources = 1,
+};
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
+ // unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led sheevaplug_led_pins[] = {
+ {
+ .name = "plug:green:health",
+ .default_trigger = "default-on",
+ .gpio = 49,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data sheevaplug_led_data = {
+ .leds = sheevaplug_led_pins,
+ .num_leds = ARRAY_SIZE(sheevaplug_led_pins),
+};
+
+static struct platform_device sheevaplug_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &sheevaplug_led_data,
+ }
+};
+
+static unsigned int sheevaplug_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP49_GPIO, /* LED */
+ 0
+};
+
+static void __init sheevaplug_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+ kirkwood_uart0_init();
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&sheevaplug_ge00_data);
+ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+ platform_device_register(&sheevaplug_nand_flash);
+ platform_device_register(&sheevaplug_leds);
+}
+
+MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
+ /* Maintainer: shadi Ammouri <shadi@marvell.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = sheevaplug_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
--- /dev/null
+/*
+ *
+ * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include <linux/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatability with
+ * the QNAP firmware.
+ * Layout as used by QNAP:
+ * 0x00000000-0x00080000 : "U-Boot"
+ * 0x00200000-0x00400000 : "Kernel"
+ * 0x00400000-0x00d00000 : "RootFS"
+ * 0x00d00000-0x01000000 : "RootFS2"
+ * 0x00080000-0x000c0000 : "U-Boot Config"
+ * 0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+static struct mtd_partition qnap_ts219_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00900000,
+ .offset = 0x00400000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00300000,
+ .offset = 0x00d00000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00040000,
+ .offset = 0x00080000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00140000,
+ .offset = 0x000c0000,
+ },
+};
+
+static const struct flash_platform_data qnap_ts219_flash = {
+ .type = "m25p128",
+ .name = "spi_flash",
+ .parts = qnap_ts219_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_ts219_partitions),
+};
+
+static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &qnap_ts219_flash,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button qnap_ts219_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 15,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 16,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qnap_ts219_button_data = {
+ .buttons = qnap_ts219_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts219_buttons),
+};
+
+static struct platform_device qnap_ts219_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &qnap_ts219_button_data,
+ }
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_UART1_TXD, /* PIC controller */
+ MPP14_UART1_RXD, /* PIC controller */
+ MPP15_GPIO, /* USB Copy button */
+ MPP16_GPIO, /* Reset button */
+ MPP20_SATA1_ACTn,
+ MPP21_SATA0_ACTn,
+ MPP22_SATA1_PRESENTn,
+ MPP23_SATA0_PRESENTn,
+ 0
+};
+
+
+/*****************************************************************************
+ * QNAP TS-x19 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_ts219_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
+static void __init qnap_ts219_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_uart1_init(); /* A PIC controller is connected here. */
+ spi_register_board_info(qnap_ts219_spi_slave_info,
+ ARRAY_SIZE(qnap_ts219_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+ kirkwood_ge00_init(&qnap_ts219_ge00_data);
+ kirkwood_sata_init(&qnap_ts219_sata_data);
+ kirkwood_ehci_init();
+ platform_device_register(&qnap_ts219_button_device);
+
+ pm_power_off = qnap_ts219_power_off;
+
+}
+
+MACHINE_START(TS219, "QNAP TS-119/TS-219")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = qnap_ts219_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
Say 'Y' here if you want your kernel to run on the D-Link
DSM-320 Wireless Media Player.
+config MACH_ACS5K
+ bool "Brivo Systems LLC, ACS-5000 Master board"
+ help
+ say 'Y' here if you want your kernel to run on the Brivo
+ Systems LLC, ACS-5000 Master board.
+
endmenu
endif
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
+obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o
--- /dev/null
+/*
+ * arch/arm/mach-ks8695/board-acs5k.c
+ *
+ * Brivo Systems LLC, ACS-5000 Master Board
+ *
+ * Copyright 2008 Simtec Electronics
+ * Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/devices.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
+ .sda_pin = 4,
+ .scl_pin = 5,
+ .udelay = 10,
+};
+
+static struct platform_device acs5k_i2c_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .num_resources = 0,
+ .resource = NULL,
+ .dev = {
+ .platform_data = &acs5k_i2c_device_platdata,
+ },
+};
+
+static int acs5k_pca9555_setup(struct i2c_client *client,
+ unsigned gpio_base, unsigned ngpio,
+ void *context)
+{
+ static int acs5k_gpio_value[] = {
+ -1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
+ };
+ int n;
+
+ for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
+ gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
+ if (acs5k_gpio_value[n] < 0)
+ gpio_direction_input(gpio_base + n);
+ else
+ gpio_direction_output(gpio_base + n,
+ acs5k_gpio_value[n]);
+ gpio_export(gpio_base + n, 0); /* Export, direction locked down */
+ }
+
+ return 0;
+}
+
+static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
+ .gpio_base = 16, /* Start directly after the CPU's GPIO */
+ .invert = 0, /* Do not invert */
+ .setup = acs5k_pca9555_setup,
+};
+
+static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+ {
+ I2C_BOARD_INFO("pca9555", 0x20),
+ .platform_data = &acs5k_i2c_pca9555_platdata,
+ },
+};
+
+static void __devinit acs5k_i2c_init(void)
+{
+ /* The gpio interface */
+ platform_device_register(&acs5k_i2c_device);
+ /* I2C devices */
+ i2c_register_board_info(0, acs5k_i2c_devs,
+ ARRAY_SIZE(acs5k_i2c_devs));
+}
+
+static struct mtd_partition acs5k_nor_partitions[] = {
+ [0] = {
+ .name = "Boot Agent and config",
+ .size = SZ_256K,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Kernel",
+ .size = SZ_1M,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "SquashFS1",
+ .size = SZ_2M,
+ .offset = SZ_256K + SZ_1M,
+ },
+ [3] = {
+ .name = "SquashFS2",
+ .size = SZ_4M + SZ_2M,
+ .offset = SZ_256K + SZ_1M + SZ_2M,
+ },
+ [4] = {
+ .name = "Data",
+ .size = SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
+ .offset = SZ_256K + SZ_8M + SZ_1M,
+ }
+};
+
+static struct physmap_flash_data acs5k_nor_pdata = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(acs5k_nor_partitions),
+ .parts = acs5k_nor_partitions,
+};
+
+static struct resource acs5k_nor_resource[] = {
+ [0] = {
+ .start = SZ_32M, /* We expect the bootloader to map
+ * the flash here.
+ */
+ .end = SZ_32M + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SZ_32M + SZ_16M,
+ .end = SZ_32M + SZ_32M - SZ_256K - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device acs5k_device_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(acs5k_nor_resource),
+ .resource = acs5k_nor_resource,
+ .dev = {
+ .platform_data = &acs5k_nor_pdata,
+ },
+};
+
+static void __init acs5k_register_nor(void)
+{
+ int ret;
+
+ if (acs5k_nor_partitions[0].mask_flags == 0)
+ printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
+
+ ret = platform_device_register(&acs5k_device_nor);
+ if (ret < 0)
+ printk(KERN_ERR "failed to register physmap-flash device\n");
+}
+
+static int __init acs5k_protection_setup(char *s)
+{
+ /* We can't allocate anything here but we should be able
+ * to trivially parse s and decide if we can protect the
+ * bootloader partition or not
+ */
+ if (strcmp(s, "no") == 0)
+ acs5k_nor_partitions[0].mask_flags = 0;
+
+ return 1;
+}
+
+__setup("protect_bootloader=", acs5k_protection_setup);
+
+static void __init acs5k_init_gpio(void)
+{
+ int i;
+
+ ks8695_register_gpios();
+ for (i = 0; i < 4; ++i)
+ gpio_request(i, "ACS5K IRQ");
+ gpio_request(7, "ACS5K KS_FRDY");
+ for (i = 8; i < 16; ++i)
+ gpio_request(i, "ACS5K Unused");
+
+ gpio_request(3, "ACS5K CAN Control");
+ gpio_request(6, "ACS5K Heartbeat");
+ gpio_direction_output(3, 1); /* Default CAN_RESET high */
+ gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
+ gpio_export(3, 0); /* export CAN_RESET as output only */
+ gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
+}
+
+static void __init acs5k_init(void)
+{
+ acs5k_init_gpio();
+
+ /* Network device */
+ ks8695_add_device_lan(); /* eth0 = LAN */
+ ks8695_add_device_wan(); /* ethX = WAN */
+
+ /* NOR devices */
+ acs5k_register_nor();
+
+ /* I2C bus */
+ acs5k_i2c_init();
+}
+
+MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
+ /* Maintainer: Simtec Electronics. */
+ .phys_io = KS8695_IO_PA,
+ .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc,
+ .boot_params = KS8695_SDRAM_PA + 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = acs5k_init,
+ .timer = &ks8695_timer,
+MACHINE_END
__phys_to_virt(x) : __bus_to_virt(x)); })
#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
+#define __arch_page_to_dma(dev, x) \
+ ({ dma_addr_t __dma = page_to_phys(page); \
+ if (!is_lbus_device(dev)) \
+ __dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
+ __dma; })
#endif
}
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
{
unsigned int reg;
*(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if (mode == 's') {
cpu_reset(0);
cpu_do_idle ();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset (0);
}
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
--- /dev/null
+if ARCH_MMP
+
+menu "Marvell PXA168/910 Implmentations"
+
+config MACH_ASPENITE
+ bool "Marvell's PXA168 Aspenite Development Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ Aspenite Development Board.
+
+config MACH_ZYLONITE2
+ bool "Marvell's PXA168 Zylonite2 Development Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ Zylonite2 Development Board.
+
+config MACH_TAVOREVB
+ bool "Marvell's PXA910 TavorEVB Development Board"
+ select CPU_PXA910
+ help
+ Say 'Y' here if you want to support the Marvell PXA910-based
+ TavorEVB Development Board.
+
+config MACH_TTC_DKB
+ bool "Marvell's PXA910 TavorEVB Development Board"
+ select CPU_PXA910
+ help
+ Say 'Y' here if you want to support the Marvell PXA910-based
+ TTC_DKB Development Board.
+
+endmenu
+
+config CPU_PXA168
+ bool
+ select CPU_MOHAWK
+ help
+ Select code specific to PXA168
+
+config CPU_PXA910
+ bool
+ select CPU_MOHAWK
+ help
+ Select code specific to PXA910
+
+endif
--- /dev/null
+#
+# Makefile for Marvell's PXA168 processors line
+#
+
+obj-y += common.o clock.o devices.o irq.o time.o
+
+# SoC support
+obj-$(CONFIG_CPU_PXA168) += pxa168.o
+obj-$(CONFIG_CPU_PXA910) += pxa910.o
+
+# board support
+obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
+obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o
+obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
+obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
--- /dev/null
+ zreladdr-y := 0x00008000
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/aspenite.c
+ *
+ * Support for the Marvell PXA168-based Aspenite and Zylonite2
+ * Development Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long common_pin_config[] __initdata = {
+ /* Data Flash Interface */
+ GPIO0_DFI_D15,
+ GPIO1_DFI_D14,
+ GPIO2_DFI_D13,
+ GPIO3_DFI_D12,
+ GPIO4_DFI_D11,
+ GPIO5_DFI_D10,
+ GPIO6_DFI_D9,
+ GPIO7_DFI_D8,
+ GPIO8_DFI_D7,
+ GPIO9_DFI_D6,
+ GPIO10_DFI_D5,
+ GPIO11_DFI_D4,
+ GPIO12_DFI_D3,
+ GPIO13_DFI_D2,
+ GPIO14_DFI_D1,
+ GPIO15_DFI_D0,
+
+ /* Static Memory Controller */
+ GPIO18_SMC_nCS0,
+ GPIO34_SMC_nCS1,
+ GPIO23_SMC_nLUA,
+ GPIO25_SMC_nLLA,
+ GPIO28_SMC_RDY,
+ GPIO29_SMC_SCLK,
+ GPIO35_SMC_BE1,
+ GPIO36_SMC_BE2,
+ GPIO27_GPIO, /* Ethernet IRQ */
+
+ /* UART1 */
+ GPIO107_UART1_RXD,
+ GPIO108_UART1_TXD,
+};
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = SMC_CS1_PHYS_BASE + 0x300,
+ .end = SMC_CS1_PHYS_BASE + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(27),
+ .end = gpio_to_irq(27),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static void __init common_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+ /* on-chip devices */
+ pxa168_add_uart(1);
+
+ /* off-chip devices */
+ platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = common_init,
+MACHINE_END
+
+MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = common_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-apbc.h>
+#include "clock.h"
+
+static void apbc_clk_enable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void apbc_clk_disable(struct clk *clk)
+{
+ __raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apbc_clk_ops = {
+ .enable = apbc_clk_enable,
+ .disable = apbc_clk_disable,
+};
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ clk->ops->enable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ clk->ops->disable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+
+ if (clk->ops->getrate)
+ rate = clk->ops->getrate(clk);
+ else
+ rate = clk->rate;
+
+ return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/clkdev.h>
+
+struct clkops {
+ void (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ unsigned long (*getrate)(struct clk *);
+};
+
+struct clk {
+ const struct clkops *ops;
+
+ void __iomem *clk_rst; /* clock reset control register */
+ int fnclksel; /* functional clock select (APBC) */
+ uint32_t enable_val; /* value for clock enable (APMU) */
+ unsigned long rate;
+ int enabled;
+};
+
+extern struct clkops apbc_clk_ops;
+
+#define APBC_CLK(_name, _reg, _fnclksel, _rate) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APBC_##_reg, \
+ .fnclksel = _fnclksel, \
+ .rate = _rate, \
+ .ops = &apbc_clk_ops, \
+}
+
+#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APBC_##_reg, \
+ .fnclksel = _fnclksel, \
+ .rate = _rate, \
+ .ops = _ops, \
+}
+
+#define APMU_CLK(_name, _reg, _eval, _rate) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APMU_##_reg, \
+ .enable_val = _eval, \
+ .rate = _rate, \
+ .ops = &apmu_clk_ops, \
+}
+
+#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APMU_##_reg, \
+ .enable_val = _eval, \
+ .rate = _rate, \
+ .ops = _ops, \
+}
+
+#define INIT_CLKREG(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
+extern struct clk clk_pxa168_gpio;
+extern struct clk clk_pxa168_timers;
+
+extern void clks_register(struct clk_lookup *, size_t);
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/common.c
+ *
+ * Code common to PXA168 processor lines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static struct map_desc standard_io_desc[] __initdata = {
+ {
+ .pfn = __phys_to_pfn(APB_PHYS_BASE),
+ .virtual = APB_VIRT_BASE,
+ .length = APB_PHYS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .pfn = __phys_to_pfn(AXI_PHYS_BASE),
+ .virtual = AXI_VIRT_BASE,
+ .length = AXI_PHYS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init pxa_map_io(void)
+{
+ iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
--- /dev/null
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+struct sys_timer;
+
+extern void timer_init(int irq);
+
+extern struct sys_timer pxa168_timer;
+extern struct sys_timer pxa910_timer;
+extern void __init pxa168_init_irq(void);
+extern void __init pxa910_init_irq(void);
+
+extern void __init icu_init_irq(void);
+extern void __init pxa_map_io(void);
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/devices.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <mach/devices.h>
+
+int __init pxa_register_device(struct pxa_device_desc *desc,
+ void *data, size_t size)
+{
+ struct platform_device *pdev;
+ struct resource res[2 + MAX_RESOURCE_DMA];
+ int i, ret = 0, nres = 0;
+
+ pdev = platform_device_alloc(desc->drv_name, desc->id);
+ if (pdev == NULL)
+ return -ENOMEM;
+
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ memset(res, 0, sizeof(res));
+
+ if (desc->start != -1ul && desc->size > 0) {
+ res[nres].start = desc->start;
+ res[nres].end = desc->start + desc->size - 1;
+ res[nres].flags = IORESOURCE_MEM;
+ nres++;
+ }
+
+ if (desc->irq != NO_IRQ) {
+ res[nres].start = desc->irq;
+ res[nres].end = desc->irq;
+ res[nres].flags = IORESOURCE_IRQ;
+ nres++;
+ }
+
+ for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
+ if (desc->dma[i] == 0)
+ break;
+
+ res[nres].start = desc->dma[i];
+ res[nres].end = desc->dma[i];
+ res[nres].flags = IORESOURCE_DMA;
+ }
+
+ ret = platform_device_add_resources(pdev, res, nres);
+ if (ret) {
+ platform_device_put(pdev);
+ return ret;
+ }
+
+ if (data && size) {
+ ret = platform_device_add_data(pdev, data, size);
+ if (ret) {
+ platform_device_put(pdev);
+ return ret;
+ }
+ }
+
+ return platform_device_add(pdev);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/addr-map.h
+ *
+ * Common address map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/* APB - Application Subsystem Peripheral Bus
+ *
+ * NOTE: the DMA controller registers are actually on the AXI fabric #1
+ * slave port to AHB/APB bridge, due to its close relationship to those
+ * peripherals on APB, let's count it into the ABP mapping area.
+ */
+#define APB_PHYS_BASE 0xd4000000
+#define APB_VIRT_BASE 0xfe000000
+#define APB_PHYS_SIZE 0x00200000
+
+#define AXI_PHYS_BASE 0xd4200000
+#define AXI_VIRT_BASE 0xfe200000
+#define AXI_PHYS_SIZE 0x00200000
+
+/* Static Memory Controller - Chip Select 0 and 1 */
+#define SMC_CS0_PHYS_BASE 0x80000000
+#define SMC_CS0_PHYS_SIZE 0x10000000
+#define SMC_CS1_PHYS_BASE 0x90000000
+#define SMC_CS1_PHYS_SIZE 0x10000000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
--- /dev/null
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __ASM_MACH_CLKDEV_H */
--- /dev/null
+#ifndef __ASM_MACH_CPUTYPE_H
+#define __ASM_MACH_CPUTYPE_H
+
+#include <asm/cputype.h>
+
+/*
+ * CPU Stepping OLD_ID CPU_ID CHIP_ID
+ *
+ * PXA168 A0 0x41159263 0x56158400 0x00A0A333
+ * PXA910 Y0 0x41159262 0x56158000 0x00F0C910
+ */
+
+#ifdef CONFIG_CPU_PXA168
+# define __cpu_is_pxa168(id) \
+ ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+#else
+# define __cpu_is_pxa168(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA910
+# define __cpu_is_pxa910(id) \
+ ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+#else
+# define __cpu_is_pxa910(id) (0)
+#endif
+
+#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); })
+#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); })
+
+#endif /* __ASM_MACH_CPUTYPE_H */
--- /dev/null
+/* arch/arm/mach-mmp/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copied from arch/arm/mach-pxa/include/mach/debug.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/addr-map.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =APB_PHYS_BASE @ physical
+ ldrne \rx, =APB_VIRT_BASE @ virtual
+ orr \rx, \rx, #0x00017000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
--- /dev/null
+#include <linux/types.h>
+
+#define MAX_RESOURCE_DMA 2
+
+/* structure for describing the on-chip devices */
+struct pxa_device_desc {
+ const char *dev_name;
+ const char *drv_name;
+ int id;
+ int irq;
+ unsigned long start;
+ unsigned long size;
+ int dma[MAX_RESOURCE_DMA];
+};
+
+#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \
+struct pxa_device_desc pxa168_device_##_name __initdata = { \
+ .dev_name = "pxa168-" #_name, \
+ .drv_name = _drv, \
+ .id = _id, \
+ .irq = IRQ_PXA168_##_irq, \
+ .start = _start, \
+ .size = _size, \
+ .dma = { _dma }, \
+};
+
+#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \
+struct pxa_device_desc pxa910_device_##_name __initdata = { \
+ .dev_name = "pxa910-" #_name, \
+ .drv_name = _drv, \
+ .id = _id, \
+ .irq = IRQ_PXA910_##_irq, \
+ .start = _start, \
+ .size = _size, \
+ .dma = { _dma }, \
+};
+extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/dma.h
+ */
+
+#ifndef __ASM_MACH_DMA_H
+#define __ASM_MACH_DMA_H
+
+#include <mach/addr-map.h>
+
+#define DMAC_REGS_VIRT (APB_VIRT_BASE + 0x00000)
+
+#include <plat/dma.h>
+#endif /* __ASM_MACH_DMA_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-icu.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =ICU_AP_IRQ_SEL_INT_NUM
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \tmp, [\base, #0]
+ and \irqnr, \tmp, #0x3f
+ tst \tmp, #(1 << 6)
+ .endm
--- /dev/null
+#ifndef __ASM_MACH_GPIO_H
+#define __ASM_MACH_GPIO_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+#include <asm-generic/gpio.h>
+
+#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+
+#define NR_BUILTIN_GPIO (128)
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
+#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
+
+
+#define __gpio_is_inverted(gpio) (0)
+#define __gpio_is_occupied(gpio) (0)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio.h>
+#endif /* __ASM_MACH_GPIO_H */
--- /dev/null
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+#endif /* __ASM_MACH_HARDWARE_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_MACH_IO_H */
--- /dev/null
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+/*
+ * Interrupt numbers for PXA168
+ */
+#define IRQ_PXA168_NONE (-1)
+#define IRQ_PXA168_SSP3 0
+#define IRQ_PXA168_SSP2 1
+#define IRQ_PXA168_SSP1 2
+#define IRQ_PXA168_SSP0 3
+#define IRQ_PXA168_PMIC_INT 4
+#define IRQ_PXA168_RTC_INT 5
+#define IRQ_PXA168_RTC_ALARM 6
+#define IRQ_PXA168_TWSI0 7
+#define IRQ_PXA168_GPU 8
+#define IRQ_PXA168_KEYPAD 9
+#define IRQ_PXA168_ONEWIRE 12
+#define IRQ_PXA168_TIMER1 13
+#define IRQ_PXA168_TIMER2 14
+#define IRQ_PXA168_TIMER3 15
+#define IRQ_PXA168_CMU 16
+#define IRQ_PXA168_SSP4 17
+#define IRQ_PXA168_MSP_WAKEUP 19
+#define IRQ_PXA168_CF_WAKEUP 20
+#define IRQ_PXA168_XD_WAKEUP 21
+#define IRQ_PXA168_MFU 22
+#define IRQ_PXA168_MSP 23
+#define IRQ_PXA168_CF 24
+#define IRQ_PXA168_XD 25
+#define IRQ_PXA168_DDR_INT 26
+#define IRQ_PXA168_UART1 27
+#define IRQ_PXA168_UART2 28
+#define IRQ_PXA168_WDT 35
+#define IRQ_PXA168_FRQ_CHANGE 38
+#define IRQ_PXA168_SDH1 39
+#define IRQ_PXA168_SDH2 40
+#define IRQ_PXA168_LCD 41
+#define IRQ_PXA168_CI 42
+#define IRQ_PXA168_USB1 44
+#define IRQ_PXA168_NAND 45
+#define IRQ_PXA168_HIFI_DMA 46
+#define IRQ_PXA168_DMA_INT0 47
+#define IRQ_PXA168_DMA_INT1 48
+#define IRQ_PXA168_GPIOX 49
+#define IRQ_PXA168_USB2 51
+#define IRQ_PXA168_AC97 57
+#define IRQ_PXA168_TWSI1 58
+#define IRQ_PXA168_PMU 60
+#define IRQ_PXA168_SM_INT 63
+
+/*
+ * Interrupt numbers for PXA910
+ */
+#define IRQ_PXA910_AIRQ 0
+#define IRQ_PXA910_SSP3 1
+#define IRQ_PXA910_SSP2 2
+#define IRQ_PXA910_SSP1 3
+#define IRQ_PXA910_PMIC_INT 4
+#define IRQ_PXA910_RTC_INT 5
+#define IRQ_PXA910_RTC_ALARM 6
+#define IRQ_PXA910_TWSI0 7
+#define IRQ_PXA910_GPU 8
+#define IRQ_PXA910_KEYPAD 9
+#define IRQ_PXA910_ROTARY 10
+#define IRQ_PXA910_TRACKBALL 11
+#define IRQ_PXA910_ONEWIRE 12
+#define IRQ_PXA910_AP1_TIMER1 13
+#define IRQ_PXA910_AP1_TIMER2 14
+#define IRQ_PXA910_AP1_TIMER3 15
+#define IRQ_PXA910_IPC_AP0 16
+#define IRQ_PXA910_IPC_AP1 17
+#define IRQ_PXA910_IPC_AP2 18
+#define IRQ_PXA910_IPC_AP3 19
+#define IRQ_PXA910_IPC_AP4 20
+#define IRQ_PXA910_IPC_CP0 21
+#define IRQ_PXA910_IPC_CP1 22
+#define IRQ_PXA910_IPC_CP2 23
+#define IRQ_PXA910_IPC_CP3 24
+#define IRQ_PXA910_IPC_CP4 25
+#define IRQ_PXA910_L2_DDR 26
+#define IRQ_PXA910_UART2 27
+#define IRQ_PXA910_UART3 28
+#define IRQ_PXA910_AP2_TIMER1 29
+#define IRQ_PXA910_AP2_TIMER2 30
+#define IRQ_PXA910_CP2_TIMER1 31
+#define IRQ_PXA910_CP2_TIMER2 32
+#define IRQ_PXA910_CP2_TIMER3 33
+#define IRQ_PXA910_GSSP 34
+#define IRQ_PXA910_CP2_WDT 35
+#define IRQ_PXA910_MAIN_PMU 36
+#define IRQ_PXA910_CP_FREQ_CHG 37
+#define IRQ_PXA910_AP_FREQ_CHG 38
+#define IRQ_PXA910_MMC 39
+#define IRQ_PXA910_AEU 40
+#define IRQ_PXA910_LCD 41
+#define IRQ_PXA910_CCIC 42
+#define IRQ_PXA910_IRE 43
+#define IRQ_PXA910_USB1 44
+#define IRQ_PXA910_NAND 45
+#define IRQ_PXA910_HIFI_DMA 46
+#define IRQ_PXA910_DMA_INT0 47
+#define IRQ_PXA910_DMA_INT1 48
+#define IRQ_PXA910_AP_GPIO 49
+#define IRQ_PXA910_AP2_TIMER3 50
+#define IRQ_PXA910_USB2 51
+#define IRQ_PXA910_TWSI1 54
+#define IRQ_PXA910_CP_GPIO 55
+#define IRQ_PXA910_UART1 59 /* Slow UART */
+#define IRQ_PXA910_AP_PMU 60
+#define IRQ_PXA910_SM_INT 63 /* from PinMux */
+
+#define IRQ_GPIO_START 64
+#define IRQ_GPIO_NUM 128
+#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
+
+#define NR_IRQS (IRQ_GPIO_START + IRQ_GPIO_NUM)
+
+#endif /* __ASM_MACH_IRQS_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif /* __ASM_MACH_MEMORY_H */
--- /dev/null
+#ifndef __ASM_MACH_MFP_PXA168_H
+#define __ASM_MACH_MFP_PXA168_H
+
+#include <mach/mfp.h>
+
+/* GPIO */
+#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
+#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
+#define GPIO2_GPIO MFP_CFG(GPIO2, AF5)
+#define GPIO3_GPIO MFP_CFG(GPIO3, AF5)
+#define GPIO4_GPIO MFP_CFG(GPIO4, AF5)
+#define GPIO5_GPIO MFP_CFG(GPIO5, AF5)
+#define GPIO6_GPIO MFP_CFG(GPIO6, AF5)
+#define GPIO7_GPIO MFP_CFG(GPIO7, AF5)
+#define GPIO8_GPIO MFP_CFG(GPIO8, AF5)
+#define GPIO9_GPIO MFP_CFG(GPIO9, AF5)
+#define GPIO10_GPIO MFP_CFG(GPIO10, AF5)
+#define GPIO11_GPIO MFP_CFG(GPIO11, AF5)
+#define GPIO12_GPIO MFP_CFG(GPIO12, AF5)
+#define GPIO13_GPIO MFP_CFG(GPIO13, AF5)
+#define GPIO14_GPIO MFP_CFG(GPIO14, AF5)
+#define GPIO15_GPIO MFP_CFG(GPIO15, AF5)
+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG(GPIO17, AF5)
+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG(GPIO19, AF5)
+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG(GPIO21, AF5)
+#define GPIO22_GPIO MFP_CFG(GPIO22, AF5)
+#define GPIO23_GPIO MFP_CFG(GPIO23, AF5)
+#define GPIO24_GPIO MFP_CFG(GPIO24, AF5)
+#define GPIO25_GPIO MFP_CFG(GPIO25, AF5)
+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG(GPIO27, AF5)
+#define GPIO28_GPIO MFP_CFG(GPIO28, AF5)
+#define GPIO29_GPIO MFP_CFG(GPIO29, AF5)
+#define GPIO30_GPIO MFP_CFG(GPIO30, AF5)
+#define GPIO31_GPIO MFP_CFG(GPIO31, AF5)
+#define GPIO32_GPIO MFP_CFG(GPIO32, AF5)
+#define GPIO33_GPIO MFP_CFG(GPIO33, AF5)
+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
+
+/* DFI */
+#define GPIO0_DFI_D15 MFP_CFG(GPIO0, AF0)
+#define GPIO1_DFI_D14 MFP_CFG(GPIO1, AF0)
+#define GPIO2_DFI_D13 MFP_CFG(GPIO2, AF0)
+#define GPIO3_DFI_D12 MFP_CFG(GPIO3, AF0)
+#define GPIO4_DFI_D11 MFP_CFG(GPIO4, AF0)
+#define GPIO5_DFI_D10 MFP_CFG(GPIO5, AF0)
+#define GPIO6_DFI_D9 MFP_CFG(GPIO6, AF0)
+#define GPIO7_DFI_D8 MFP_CFG(GPIO7, AF0)
+#define GPIO8_DFI_D7 MFP_CFG(GPIO8, AF0)
+#define GPIO9_DFI_D6 MFP_CFG(GPIO9, AF0)
+#define GPIO10_DFI_D5 MFP_CFG(GPIO10, AF0)
+#define GPIO11_DFI_D4 MFP_CFG(GPIO11, AF0)
+#define GPIO12_DFI_D3 MFP_CFG(GPIO12, AF0)
+#define GPIO13_DFI_D2 MFP_CFG(GPIO13, AF0)
+#define GPIO14_DFI_D1 MFP_CFG(GPIO14, AF0)
+#define GPIO15_DFI_D0 MFP_CFG(GPIO15, AF0)
+
+#define GPIO30_DFI_ADDR0 MFP_CFG(GPIO30, AF0)
+#define GPIO31_DFI_ADDR1 MFP_CFG(GPIO31, AF0)
+#define GPIO32_DFI_ADDR2 MFP_CFG(GPIO32, AF0)
+#define GPIO33_DFI_ADDR3 MFP_CFG(GPIO33, AF0)
+
+/* NAND */
+#define GPIO16_ND_nCS0 MFP_CFG(GPIO16, AF1)
+#define GPIO17_ND_nWE MFP_CFG(GPIO17, AF0)
+#define GPIO21_ND_ALE MFP_CFG(GPIO21, AF0)
+#define GPIO22_ND_CLE MFP_CFG(GPIO22, AF0)
+#define GPIO24_ND_nRE MFP_CFG(GPIO24, AF0)
+#define GPIO26_ND_RnB1 MFP_CFG(GPIO26, AF1)
+#define GPIO27_ND_RnB2 MFP_CFG(GPIO27, AF1)
+
+/* Static Memory Controller */
+#define GPIO18_SMC_nCS0 MFP_CFG(GPIO18, AF3)
+#define GPIO18_SMC_nCS1 MFP_CFG(GPIO18, AF2)
+#define GPIO16_SMC_nCS0 MFP_CFG(GPIO16, AF2)
+#define GPIO16_SMC_nCS1 MFP_CFG(GPIO16, AF3)
+#define GPIO19_SMC_nCS0 MFP_CFG(GPIO19, AF0)
+#define GPIO20_SMC_nCS1 MFP_CFG(GPIO20, AF2)
+#define GPIO23_SMC_nLUA MFP_CFG(GPIO23, AF0)
+#define GPIO25_SMC_nLLA MFP_CFG(GPIO25, AF0)
+#define GPIO27_SMC_IRQ MFP_CFG(GPIO27, AF0)
+#define GPIO28_SMC_RDY MFP_CFG(GPIO28, AF0)
+#define GPIO29_SMC_SCLK MFP_CFG(GPIO29, AF0)
+#define GPIO34_SMC_nCS1 MFP_CFG(GPIO34, AF2)
+#define GPIO35_SMC_BE1 MFP_CFG(GPIO35, AF2)
+#define GPIO36_SMC_BE2 MFP_CFG(GPIO36, AF2)
+
+/* Compact Flash */
+#define GPIO19_CF_nCE1 MFP_CFG(GPIO19, AF3)
+#define GPIO20_CF_nCE2 MFP_CFG(GPIO20, AF3)
+#define GPIO23_CF_nALE MFP_CFG(GPIO23, AF3)
+#define GPIO25_CF_nRESET MFP_CFG(GPIO25, AF3)
+#define GPIO28_CF_RDY MFP_CFG(GPIO28, AF3)
+#define GPIO29_CF_STSCH MFP_CFG(GPIO29, AF3)
+#define GPIO30_CF_nREG MFP_CFG(GPIO30, AF3)
+#define GPIO31_CF_nIOIS16 MFP_CFG(GPIO31, AF3)
+#define GPIO32_CF_nCD1 MFP_CFG(GPIO32, AF3)
+#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3)
+
+/* UART1 */
+#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST)
+#define GPIO107_UART1_RXD MFP_CFG_DRV(GPIO107, AF2, FAST)
+#define GPIO108_UART1_RXD MFP_CFG_DRV(GPIO108, AF1, FAST)
+#define GPIO108_UART1_TXD MFP_CFG_DRV(GPIO108, AF2, FAST)
+#define GPIO109_UART1_CTS MFP_CFG(GPIO109, AF1)
+#define GPIO109_UART1_RTS MFP_CFG(GPIO109, AF2)
+#define GPIO110_UART1_RTS MFP_CFG(GPIO110, AF1)
+#define GPIO110_UART1_CTS MFP_CFG(GPIO110, AF2)
+#define GPIO111_UART1_RI MFP_CFG(GPIO111, AF1)
+#define GPIO111_UART1_DSR MFP_CFG(GPIO111, AF2)
+#define GPIO112_UART1_DTR MFP_CFG(GPIO111, AF1)
+#define GPIO112_UART1_DCD MFP_CFG(GPIO112, AF2)
+
+/* MMC1 */
+#define GPIO37_MMC1_DAT7 MFP_CFG(GPIO37, AF1)
+#define GPIO38_MMC1_DAT6 MFP_CFG(GPIO38, AF1)
+#define GPIO54_MMC1_DAT5 MFP_CFG(GPIO54, AF1)
+#define GPIO48_MMC1_DAT4 MFP_CFG(GPIO48, AF1)
+#define GPIO51_MMC1_DAT3 MFP_CFG(GPIO51, AF1)
+#define GPIO52_MMC1_DAT2 MFP_CFG(GPIO52, AF1)
+#define GPIO40_MMC1_DAT1 MFP_CFG(GPIO40, AF1)
+#define GPIO41_MMC1_DAT0 MFP_CFG(GPIO41, AF1)
+#define GPIO49_MMC1_CMD MFP_CFG(GPIO49, AF1)
+#define GPIO43_MMC1_CLK MFP_CFG(GPIO43, AF1)
+#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1)
+#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1)
+
+/* LCD */
+#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1)
+#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1)
+#define GPIO61_LCD_DD1 MFP_CFG(GPIO61, AF1)
+#define GPIO70_LCD_DD10 MFP_CFG(GPIO70, AF1)
+#define GPIO71_LCD_DD11 MFP_CFG(GPIO71, AF1)
+#define GPIO72_LCD_DD12 MFP_CFG(GPIO72, AF1)
+#define GPIO73_LCD_DD13 MFP_CFG(GPIO73, AF1)
+#define GPIO74_LCD_DD14 MFP_CFG(GPIO74, AF1)
+#define GPIO75_LCD_DD15 MFP_CFG(GPIO75, AF1)
+#define GPIO76_LCD_DD16 MFP_CFG(GPIO76, AF1)
+#define GPIO77_LCD_DD17 MFP_CFG(GPIO77, AF1)
+#define GPIO78_LCD_DD18 MFP_CFG(GPIO78, AF1)
+#define GPIO79_LCD_DD19 MFP_CFG(GPIO79, AF1)
+#define GPIO62_LCD_DD2 MFP_CFG(GPIO62, AF1)
+#define GPIO80_LCD_DD20 MFP_CFG(GPIO80, AF1)
+#define GPIO81_LCD_DD21 MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_DD22 MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_DD23 MFP_CFG(GPIO83, AF1)
+#define GPIO63_LCD_DD3 MFP_CFG(GPIO63, AF1)
+#define GPIO64_LCD_DD4 MFP_CFG(GPIO64, AF1)
+#define GPIO65_LCD_DD5 MFP_CFG(GPIO65, AF1)
+#define GPIO66_LCD_DD6 MFP_CFG(GPIO66, AF1)
+#define GPIO67_LCD_DD7 MFP_CFG(GPIO67, AF1)
+#define GPIO68_LCD_DD8 MFP_CFG(GPIO68, AF1)
+#define GPIO69_LCD_DD9 MFP_CFG(GPIO69, AF1)
+#define GPIO59_LCD_DENA_BIAS MFP_CFG(GPIO59, AF1)
+#define GPIO56_LCD_FCLK_RD MFP_CFG(GPIO56, AF1)
+#define GPIO57_LCD_LCLK_A0 MFP_CFG(GPIO57, AF1)
+#define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1)
+#define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1)
+
+/* I2S */
+#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6)
+#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1)
+#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1)
+#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2)
+#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2)
+
+#endif /* __ASM_MACH_MFP_PXA168_H */
--- /dev/null
+#ifndef __ASM_MACH_MFP_PXA910_H
+#define __ASM_MACH_MFP_PXA910_H
+
+#include <mach/mfp.h>
+
+/* UART2 */
+#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
+#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
+
+/* UART3 */
+#define GPIO31_UART3_RXD MFP_CFG(GPIO31, AF4)
+#define GPIO32_UART3_TXD MFP_CFG(GPIO32, AF4)
+
+/*IRDA*/
+#define GPIO51_IRDA_SHDN MFP_CFG(GPIO51, AF0)
+
+/* SMC */
+#define SM_nCS0_nCS0 MFP_CFG(SM_nCS0, AF0)
+#define SM_ADV_SM_ADV MFP_CFG(SM_ADV, AF0)
+#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
+#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
+#define SM_BE0_SM_BE0 MFP_CFG(SM_BE0, AF1)
+#define SM_BE1_SM_BE1 MFP_CFG(SM_BE1, AF1)
+
+/* I2C */
+#define GPIO53_CI2C_SCL MFP_CFG(GPIO53, AF2)
+#define GPIO54_CI2C_SDA MFP_CFG(GPIO54, AF2)
+
+/* SSP1 (I2S) */
+#define GPIO24_SSP1_SDATA_IN MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
+#define GPIO21_SSP1_BITCLK MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
+#define GPIO20_SSP1_SYSCLK MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
+#define GPIO22_SSP1_SYNC MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
+#define GPIO23_SSP1_DATA_OUT MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
+#define GPIO124_MN_CLK_OUT MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
+#define GPIO123_CLK_REQ MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
+
+/* DFI */
+#define DF_IO0_ND_IO0 MFP_CFG(DF_IO0, AF0)
+#define DF_IO1_ND_IO1 MFP_CFG(DF_IO1, AF0)
+#define DF_IO2_ND_IO2 MFP_CFG(DF_IO2, AF0)
+#define DF_IO3_ND_IO3 MFP_CFG(DF_IO3, AF0)
+#define DF_IO4_ND_IO4 MFP_CFG(DF_IO4, AF0)
+#define DF_IO5_ND_IO5 MFP_CFG(DF_IO5, AF0)
+#define DF_IO6_ND_IO6 MFP_CFG(DF_IO6, AF0)
+#define DF_IO7_ND_IO7 MFP_CFG(DF_IO7, AF0)
+#define DF_IO8_ND_IO8 MFP_CFG(DF_IO8, AF0)
+#define DF_IO9_ND_IO9 MFP_CFG(DF_IO9, AF0)
+#define DF_IO10_ND_IO10 MFP_CFG(DF_IO10, AF0)
+#define DF_IO11_ND_IO11 MFP_CFG(DF_IO11, AF0)
+#define DF_IO12_ND_IO12 MFP_CFG(DF_IO12, AF0)
+#define DF_IO13_ND_IO13 MFP_CFG(DF_IO13, AF0)
+#define DF_IO14_ND_IO14 MFP_CFG(DF_IO14, AF0)
+#define DF_IO15_ND_IO15 MFP_CFG(DF_IO15, AF0)
+#define DF_nCS0_SM_nCS2_nCS0 MFP_CFG(DF_nCS0_SM_nCS2, AF0)
+#define DF_ALE_SM_WEn_ND_ALE MFP_CFG(DF_ALE_SM_WEn, AF1)
+#define DF_CLE_SM_OEn_ND_CLE MFP_CFG(DF_CLE_SM_OEn, AF0)
+#define DF_WEn_DF_WEn MFP_CFG(DF_WEn, AF1)
+#define DF_REn_DF_REn MFP_CFG(DF_REn, AF1)
+#define DF_RDY0_DF_RDY0 MFP_CFG(DF_RDY0, AF0)
+
+/*keypad*/
+#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1)
+
+/* LCD */
+#define GPIO81_LCD_FCLK MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_LCLK MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_PCLK MFP_CFG(GPIO83, AF1)
+#define GPIO84_LCD_DENA MFP_CFG(GPIO84, AF1)
+#define GPIO85_LCD_DD0 MFP_CFG(GPIO85, AF1)
+#define GPIO86_LCD_DD1 MFP_CFG(GPIO86, AF1)
+#define GPIO87_LCD_DD2 MFP_CFG(GPIO87, AF1)
+#define GPIO88_LCD_DD3 MFP_CFG(GPIO88, AF1)
+#define GPIO89_LCD_DD4 MFP_CFG(GPIO89, AF1)
+#define GPIO90_LCD_DD5 MFP_CFG(GPIO90, AF1)
+#define GPIO91_LCD_DD6 MFP_CFG(GPIO91, AF1)
+#define GPIO92_LCD_DD7 MFP_CFG(GPIO92, AF1)
+#define GPIO93_LCD_DD8 MFP_CFG(GPIO93, AF1)
+#define GPIO94_LCD_DD9 MFP_CFG(GPIO94, AF1)
+#define GPIO95_LCD_DD10 MFP_CFG(GPIO95, AF1)
+#define GPIO96_LCD_DD11 MFP_CFG(GPIO96, AF1)
+#define GPIO97_LCD_DD12 MFP_CFG(GPIO97, AF1)
+#define GPIO98_LCD_DD13 MFP_CFG(GPIO98, AF1)
+#define GPIO100_LCD_DD14 MFP_CFG(GPIO100, AF1)
+#define GPIO101_LCD_DD15 MFP_CFG(GPIO101, AF1)
+#define GPIO102_LCD_DD16 MFP_CFG(GPIO102, AF1)
+#define GPIO103_LCD_DD17 MFP_CFG(GPIO103, AF1)
+#define GPIO104_LCD_DD18 MFP_CFG(GPIO104, AF1)
+#define GPIO105_LCD_DD19 MFP_CFG(GPIO105, AF1)
+#define GPIO106_LCD_DD20 MFP_CFG(GPIO106, AF1)
+#define GPIO107_LCD_DD21 MFP_CFG(GPIO107, AF1)
+#define GPIO108_LCD_DD22 MFP_CFG(GPIO108, AF1)
+#define GPIO109_LCD_DD23 MFP_CFG(GPIO109, AF1)
+
+#define GPIO104_LCD_SPIDOUT MFP_CFG(GPIO104, AF3)
+#define GPIO105_LCD_SPIDIN MFP_CFG(GPIO105, AF3)
+#define GPIO107_LCD_CS1 MFP_CFG(GPIO107, AF3)
+#define GPIO108_LCD_DCLK MFP_CFG(GPIO108, AF3)
+
+#define GPIO106_LCD_RESET MFP_CFG(GPIO106, AF0)
+
+/*smart panel*/
+#define GPIO82_LCD_A0 MFP_CFG(GPIO82, AF0)
+#define GPIO83_LCD_WR MFP_CFG(GPIO83, AF0)
+#define GPIO103_LCD_CS MFP_CFG(GPIO103, AF0)
+
+/*1wire*/
+#define GPIO106_1WIRE MFP_CFG(GPIO106, AF3)
+
+/*CCIC*/
+#define GPIO67_CCIC_IN7 MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
+#define GPIO68_CCIC_IN6 MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
+#define GPIO69_CCIC_IN5 MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
+#define GPIO70_CCIC_IN4 MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
+#define GPIO71_CCIC_IN3 MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
+#define GPIO72_CCIC_IN2 MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
+#define GPIO73_CCIC_IN1 MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
+#define GPIO74_CCIC_IN0 MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
+#define GPIO75_CAM_HSYNC MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
+#define GPIO76_CAM_VSYNC MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
+#define GPIO77_CAM_MCLK MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
+#define GPIO78_CAM_PCLK MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
+
+/* MMC1 */
+#define MMC1_DAT7_MMC1_DAT7 MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
+#define MMC1_DAT6_MMC1_DAT6 MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
+#define MMC1_DAT5_MMC1_DAT5 MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
+#define MMC1_DAT4_MMC1_DAT4 MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
+#define MMC1_DAT3_MMC1_DAT3 MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
+#define MMC1_DAT2_MMC1_DAT2 MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
+#define MMC1_DAT1_MMC1_DAT1 MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
+#define MMC1_DAT0_MMC1_DAT0 MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
+#define MMC1_CMD_MMC1_CMD MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
+#define MMC1_CLK_MMC1_CLK MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
+#define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
+#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
+
+#endif /* __ASM_MACH MFP_PXA910_H */
--- /dev/null
+#ifndef __ASM_MACH_MFP_H
+#define __ASM_MACH_MFP_H
+
+#include <plat/mfp.h>
+
+/*
+ * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
+ * bit different from those on PXA3xx. Bit [7:10] are now reserved, which
+ * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits.
+ *
+ * To cope with this difference and re-use the pxa3xx mfp code as much as
+ * possible, we make the following compromise:
+ *
+ * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
+ * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 3. Override MFP_CFG() and MFP_CFG_DRV()
+ * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
+ */
+
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x2 << 13)
+#define MFP_DRIVE_MEDIUM (0x4 << 13)
+#define MFP_DRIVE_FAST (0x8 << 13)
+
+#undef MFP_CFG
+#undef MFP_CFG_DRV
+#undef MFP_CFG_LPM
+#undef MFP_CFG_X
+#undef MFP_CFG_DEFAULT
+
+#define MFP_CFG(pin, af) \
+ (MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ (MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
+
+#endif /* __ASM_MACH_MFP_H */
--- /dev/null
+#ifndef __ASM_MACH_PXA168_H
+#define __ASM_MACH_PXA168_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa168_device_uart1;
+extern struct pxa_device_desc pxa168_device_uart2;
+
+static inline int pxa168_add_uart(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa168_device_uart1; break;
+ case 2: d = &pxa168_device_uart2; break;
+ }
+
+ if (d == NULL)
+ return -EINVAL;
+
+ return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA168_H */
--- /dev/null
+#ifndef __ASM_MACH_PXA910_H
+#define __ASM_MACH_PXA910_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa910_device_uart1;
+extern struct pxa_device_desc pxa910_device_uart2;
+
+static inline int pxa910_add_uart(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa910_device_uart1; break;
+ case 2: d = &pxa910_device_uart2; break;
+ }
+
+ if (d == NULL)
+ return -EINVAL;
+
+ return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA910_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
+ *
+ * Application Peripheral Bus Clock Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APBC_H
+#define __ASM_MACH_REGS_APBC_H
+
+#include <mach/addr-map.h>
+
+#define APBC_VIRT_BASE (APB_VIRT_BASE + 0x015000)
+#define APBC_REG(x) (APBC_VIRT_BASE + (x))
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_PXA168_UART1 APBC_REG(0x000)
+#define APBC_PXA168_UART2 APBC_REG(0x004)
+#define APBC_PXA168_GPIO APBC_REG(0x008)
+#define APBC_PXA168_PWM0 APBC_REG(0x00c)
+#define APBC_PXA168_PWM1 APBC_REG(0x010)
+#define APBC_PXA168_SSP1 APBC_REG(0x01c)
+#define APBC_PXA168_SSP2 APBC_REG(0x020)
+#define APBC_PXA168_RTC APBC_REG(0x028)
+#define APBC_PXA168_TWSI0 APBC_REG(0x02c)
+#define APBC_PXA168_KPC APBC_REG(0x030)
+#define APBC_PXA168_TIMERS APBC_REG(0x034)
+#define APBC_PXA168_AIB APBC_REG(0x03c)
+#define APBC_PXA168_SW_JTAG APBC_REG(0x040)
+#define APBC_PXA168_ONEWIRE APBC_REG(0x048)
+#define APBC_PXA168_SSP3 APBC_REG(0x04c)
+#define APBC_PXA168_ASFAR APBC_REG(0x050)
+#define APBC_PXA168_ASSAR APBC_REG(0x054)
+#define APBC_PXA168_SSP4 APBC_REG(0x058)
+#define APBC_PXA168_SSP5 APBC_REG(0x05c)
+#define APBC_PXA168_TWSI1 APBC_REG(0x06c)
+#define APBC_PXA168_UART3 APBC_REG(0x070)
+#define APBC_PXA168_AC97 APBC_REG(0x084)
+
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_PXA910_UART0 APBC_REG(0x000)
+#define APBC_PXA910_UART1 APBC_REG(0x004)
+#define APBC_PXA910_GPIO APBC_REG(0x008)
+#define APBC_PXA910_PWM0 APBC_REG(0x00c)
+#define APBC_PXA910_PWM1 APBC_REG(0x010)
+#define APBC_PXA910_PWM2 APBC_REG(0x014)
+#define APBC_PXA910_PWM3 APBC_REG(0x018)
+#define APBC_PXA910_SSP1 APBC_REG(0x01c)
+#define APBC_PXA910_SSP2 APBC_REG(0x020)
+#define APBC_PXA910_IPC APBC_REG(0x024)
+#define APBC_PXA910_TWSI0 APBC_REG(0x02c)
+#define APBC_PXA910_KPC APBC_REG(0x030)
+#define APBC_PXA910_TIMERS APBC_REG(0x034)
+#define APBC_PXA910_TBROT APBC_REG(0x038)
+#define APBC_PXA910_AIB APBC_REG(0x03c)
+#define APBC_PXA910_SW_JTAG APBC_REG(0x040)
+#define APBC_PXA910_TIMERS1 APBC_REG(0x044)
+#define APBC_PXA910_ONEWIRE APBC_REG(0x048)
+#define APBC_PXA910_SSP3 APBC_REG(0x04c)
+#define APBC_PXA910_ASFAR APBC_REG(0x050)
+#define APBC_PXA910_ASSAR APBC_REG(0x054)
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
+#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
+#define APBC_RST (1 << 2) /* Reset Generation */
+
+/* Functional Clock Selection Mask */
+#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
+
+#endif /* __ASM_MACH_REGS_APBC_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
+ *
+ * Application Subsystem Power Management Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APMU_H
+#define __ASM_MACH_REGS_APMU_H
+
+#include <mach/addr-map.h>
+
+#define APMU_VIRT_BASE (AXI_VIRT_BASE + 0x82800)
+#define APMU_REG(x) (APMU_VIRT_BASE + (x))
+
+/* Clock Reset Control */
+#define APMU_IRE APMU_REG(0x048)
+#define APMU_LCD APMU_REG(0x04c)
+#define APMU_CCIC APMU_REG(0x050)
+#define APMU_SDH0 APMU_REG(0x054)
+#define APMU_SDH1 APMU_REG(0x058)
+#define APMU_USB APMU_REG(0x05c)
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_DMA APMU_REG(0x064)
+#define APMU_GEU APMU_REG(0x068)
+#define APMU_BUS APMU_REG(0x06c)
+
+#define APMU_FNCLK_EN (1 << 4)
+#define APMU_AXICLK_EN (1 << 3)
+#define APMU_FNRST_DIS (1 << 1)
+#define APMU_AXIRST_DIS (1 << 0)
+
+#endif /* __ASM_MACH_REGS_APMU_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
+ *
+ * Interrupt Control Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ICU_H
+#define __ASM_MACH_ICU_H
+
+#include <mach/addr-map.h>
+
+#define ICU_VIRT_BASE (AXI_VIRT_BASE + 0x82000)
+#define ICU_REG(x) (ICU_VIRT_BASE + (x))
+
+#define ICU_INT_CONF(n) ICU_REG((n) << 2)
+#define ICU_INT_CONF_AP_INT (1 << 6)
+#define ICU_INT_CONF_CP_INT (1 << 5)
+#define ICU_INT_CONF_IRQ (1 << 4)
+#define ICU_INT_CONF_MASK (0xf)
+
+#define ICU_AP_FIQ_SEL_INT_NUM ICU_REG(0x108) /* AP FIQ Selected Interrupt */
+#define ICU_AP_IRQ_SEL_INT_NUM ICU_REG(0x10C) /* AP IRQ Selected Interrupt */
+#define ICU_AP_GBL_IRQ_MSK ICU_REG(0x114) /* AP Global Interrupt Mask */
+#define ICU_INT_STATUS_0 ICU_REG(0x128) /* Interrupt Stuats 0 */
+#define ICU_INT_STATUS_1 ICU_REG(0x12C) /* Interrupt Status 1 */
+
+#endif /* __ASM_MACH_ICU_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
+ *
+ * Timers Module
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_TIMERS_H
+#define __ASM_MACH_REGS_TIMERS_H
+
+#include <mach/addr-map.h>
+
+#define TIMERS1_VIRT_BASE (APB_VIRT_BASE + 0x14000)
+#define TIMERS2_VIRT_BASE (APB_VIRT_BASE + 0x16000)
+
+#define TMR_CCR (0x0000)
+#define TMR_TN_MM(n, m) (0x0004 + ((n) << 3) + (((n) + (m)) << 2))
+#define TMR_CR(n) (0x0028 + ((n) << 2))
+#define TMR_SR(n) (0x0034 + ((n) << 2))
+#define TMR_IER(n) (0x0040 + ((n) << 2))
+#define TMR_PLVR(n) (0x004c + ((n) << 2))
+#define TMR_PLCR(n) (0x0058 + ((n) << 2))
+#define TMR_WMER (0x0064)
+#define TMR_WMR (0x0068)
+#define TMR_WVR (0x006c)
+#define TMR_WSR (0x0070)
+#define TMR_ICR(n) (0x0074 + ((n) << 2))
+#define TMR_WICR (0x0080)
+#define TMR_CER (0x0084)
+#define TMR_CMR (0x0088)
+#define TMR_ILR(n) (0x008c + ((n) << 2))
+#define TMR_WCR (0x0098)
+#define TMR_WFAR (0x009c)
+#define TMR_WSAR (0x00A0)
+#define TMR_CVWR(n) (0x00A4 + ((n) << 2))
+
+#define TMR_CCR_CS_0(x) (((x) & 0x3) << 0)
+#define TMR_CCR_CS_1(x) (((x) & 0x7) << 2)
+#define TMR_CCR_CS_2(x) (((x) & 0x3) << 5)
+
+#endif /* __ASM_MACH_REGS_TIMERS_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_SYSTEM_H
+#define __ASM_MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+#endif /* __ASM_MACH_SYSTEM_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLOCK_TICK_RATE 3250000
--- /dev/null
+/*
+ * arch/arm/mach-mmp/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/addr-map.h>
+
+#define UART1_BASE (APB_PHYS_BASE + 0x36000)
+#define UART2_BASE (APB_PHYS_BASE + 0x17000)
+#define UART3_BASE (APB_PHYS_BASE + 0x18000)
+
+static inline void putc(char c)
+{
+ volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
+ /* UART enabled? */
+ if (!(UART[UART_IER] & UART_IER_UUE))
+ return;
+
+ while (!(UART[UART_LSR] & UART_LSR_THRE))
+ barrier();
+
+ UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe000000
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/irq.c
+ *
+ * Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ * Author: Bin Yang <bin.yang@marvell.com>
+ * Created: Sep 30, 2008
+ * Copyright: Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+#define IRQ_ROUTE_TO_AP (ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
+
+#define PRIORITY_DEFAULT 0x1
+#define PRIORITY_NONE 0x0 /* means IRQ disabled */
+
+static void icu_mask_irq(unsigned int irq)
+{
+ __raw_writel(PRIORITY_NONE, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+ __raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+ .name = "icu_irq",
+ .ack = icu_mask_irq,
+ .mask = icu_mask_irq,
+ .unmask = icu_unmask_irq,
+};
+
+void __init icu_init_irq(void)
+{
+ int irq;
+
+ for (irq = 0; irq < 64; irq++) {
+ icu_mask_irq(irq);
+ set_irq_chip(irq, &icu_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/pxa168.c
+ *
+ * Code specific to PXA168
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/cputype.h>
+#include <mach/regs-apbc.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/devices.h>
+#include <mach/mfp.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
+{
+ MFP_ADDR_X(GPIO0, GPIO36, 0x04c),
+ MFP_ADDR_X(GPIO37, GPIO55, 0x000),
+ MFP_ADDR_X(GPIO56, GPIO123, 0x0e0),
+ MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
+
+ MFP_ADDR_END,
+};
+
+#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa168_init_gpio(void)
+{
+ int i;
+
+ /* enable GPIO clock */
+ __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
+
+ /* unmask GPIO edge detection for all 4 banks - APMASKx */
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xffffffff, APMASK(i));
+
+ pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
+}
+
+void __init pxa168_init_irq(void)
+{
+ icu_init_irq();
+ pxa168_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
+static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa168_init(void)
+{
+ if (cpu_is_pxa168()) {
+ mfp_init_base(MFPR_VIRT_BASE);
+ mfp_init_addr(pxa168_mfp_addr_map);
+ pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
+ clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
+ }
+
+ return 0;
+}
+postcore_initcall(pxa168_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa168_timer_init(void)
+{
+ /* this is early, we have to initialize the CCU registers by
+ * ourselves instead of using clk_* API. Clock rate is defined
+ * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
+ */
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+
+ /* 3.25MHz, bus/functional clock enabled, release reset */
+ __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+
+ timer_init(IRQ_PXA168_TIMER1);
+}
+
+struct sys_timer pxa168_timer = {
+ .init = pxa168_timer_init,
+};
+
+/* on-chip devices */
+PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
+PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/pxa910.c
+ *
+ * Code specific to PXA910
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mfp.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
+{
+ MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
+ MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
+ MFP_ADDR_X(GPIO100, GPIO109, 0x238),
+
+ MFP_ADDR(GPIO123, 0xcc),
+ MFP_ADDR(GPIO124, 0xd0),
+
+ MFP_ADDR(DF_IO0, 0x40),
+ MFP_ADDR(DF_IO1, 0x3c),
+ MFP_ADDR(DF_IO2, 0x38),
+ MFP_ADDR(DF_IO3, 0x34),
+ MFP_ADDR(DF_IO4, 0x30),
+ MFP_ADDR(DF_IO5, 0x2c),
+ MFP_ADDR(DF_IO6, 0x28),
+ MFP_ADDR(DF_IO7, 0x24),
+ MFP_ADDR(DF_IO8, 0x20),
+ MFP_ADDR(DF_IO9, 0x1c),
+ MFP_ADDR(DF_IO10, 0x18),
+ MFP_ADDR(DF_IO11, 0x14),
+ MFP_ADDR(DF_IO12, 0x10),
+ MFP_ADDR(DF_IO13, 0xc),
+ MFP_ADDR(DF_IO14, 0x8),
+ MFP_ADDR(DF_IO15, 0x4),
+
+ MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
+ MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
+ MFP_ADDR(SM_nCS0, 0x4c),
+ MFP_ADDR(SM_nCS1, 0x50),
+ MFP_ADDR(DF_WEn, 0x54),
+ MFP_ADDR(DF_REn, 0x58),
+ MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
+ MFP_ADDR(DF_ALE_SM_WEn, 0x60),
+ MFP_ADDR(SM_SCLK, 0x64),
+ MFP_ADDR(DF_RDY0, 0x68),
+ MFP_ADDR(SM_BE0, 0x6c),
+ MFP_ADDR(SM_BE1, 0x70),
+ MFP_ADDR(SM_ADV, 0x74),
+ MFP_ADDR(DF_RDY1, 0x78),
+ MFP_ADDR(SM_ADVMUX, 0x7c),
+ MFP_ADDR(SM_RDY, 0x80),
+
+ MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
+
+ MFP_ADDR_END,
+};
+
+#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa910_init_gpio(void)
+{
+ int i;
+
+ /* enable GPIO clock */
+ __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
+
+ /* unmask GPIO edge detection for all 4 banks - APMASKx */
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xffffffff, APMASK(i));
+
+ pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
+}
+
+void __init pxa910_init_irq(void)
+{
+ icu_init_irq();
+ pxa910_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
+static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa910_init(void)
+{
+ if (cpu_is_pxa910()) {
+ mfp_init_base(MFPR_VIRT_BASE);
+ mfp_init_addr(pxa910_mfp_addr_map);
+ pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
+ clks_register(ARRAY_AND_SIZE(pxa910_clkregs));
+ }
+
+ return 0;
+}
+postcore_initcall(pxa910_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa910_timer_init(void)
+{
+ /* reset and configure */
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
+ __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+
+ timer_init(IRQ_PXA910_AP1_TIMER1);
+}
+
+struct sys_timer pxa910_timer = {
+ .init = pxa910_timer_init,
+};
+
+/* on-chip devices */
+
+/* NOTE: there are totally 3 UARTs on PXA910:
+ *
+ * UART1 - Slow UART (can be used both by AP and CP)
+ * UART2/3 - Fast UART
+ *
+ * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
+ * they are re-ordered as:
+ *
+ * pxa910_device_uart1 - UART2 as FFUART
+ * pxa910_device_uart2 - UART3 as BTUART
+ *
+ * UART1 is not used by AP for the moment.
+ */
+PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
+PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/tavorevb.c
+ *
+ * Support for the Marvell PXA910-based TavorEVB Development Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa910.h>
+#include <mach/pxa910.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long tavorevb_pin_config[] __initdata = {
+ /* UART2 */
+ GPIO47_UART2_RXD,
+ GPIO48_UART2_TXD,
+
+ /* SMC */
+ SM_nCS0_nCS0,
+ SM_ADV_SM_ADV,
+ SM_SCLK_SM_SCLK,
+ SM_SCLK_SM_SCLK,
+ SM_BE0_SM_BE0,
+ SM_BE1_SM_BE1,
+
+ /* DFI */
+ DF_IO0_ND_IO0,
+ DF_IO1_ND_IO1,
+ DF_IO2_ND_IO2,
+ DF_IO3_ND_IO3,
+ DF_IO4_ND_IO4,
+ DF_IO5_ND_IO5,
+ DF_IO6_ND_IO6,
+ DF_IO7_ND_IO7,
+ DF_IO8_ND_IO8,
+ DF_IO9_ND_IO9,
+ DF_IO10_ND_IO10,
+ DF_IO11_ND_IO11,
+ DF_IO12_ND_IO12,
+ DF_IO13_ND_IO13,
+ DF_IO14_ND_IO14,
+ DF_IO15_ND_IO15,
+ DF_nCS0_SM_nCS2_nCS0,
+ DF_ALE_SM_WEn_ND_ALE,
+ DF_CLE_SM_OEn_ND_CLE,
+ DF_WEn_DF_WEn,
+ DF_REn_DF_REn,
+ DF_RDY0_DF_RDY0,
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = SMC_CS1_PHYS_BASE + 0x300,
+ .end = SMC_CS1_PHYS_BASE + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(80),
+ .end = gpio_to_irq(80),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .platform_data = &tavorevb_smc91x_info,
+ },
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static void __init tavorevb_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
+
+ /* on-chip devices */
+ pxa910_add_uart(1);
+
+ /* off-chip devices */
+ platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa910_init_irq,
+ .timer = &pxa910_timer,
+ .init_machine = tavorevb_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/time.c
+ *
+ * Support for clocksource and clockevents
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ * 2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
+ * 2008-10-08: Bin Yang <bin.yang@marvell.com>
+ *
+ * The timers module actually includes three timers, each timer with upto
+ * three match comparators. Timer #0 is used here in free-running mode as
+ * the clock source, and match comparator #1 used as clock event device.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-timers.h>
+#include <mach/irqs.h>
+
+#include "clock.h"
+
+#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
+
+#define MAX_DELTA (0xfffffffe)
+#define MIN_DELTA (16)
+
+#define TCR2NS_SCALE_FACTOR 10
+
+static unsigned long tcr2ns_scale;
+
+static void __init set_tcr2ns_scale(unsigned long tcr_rate)
+{
+ unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR;
+ do_div(v, tcr_rate);
+ tcr2ns_scale = v;
+ /*
+ * We want an even value to automatically clear the top bit
+ * returned by cnt32_to_63() without an additional run time
+ * instruction. So if the LSB is 1 then round it up.
+ */
+ if (tcr2ns_scale & 1)
+ tcr2ns_scale++;
+}
+
+/*
+ * FIXME: the timer needs some delay to stablize the counter capture
+ */
+static inline uint32_t timer_read(void)
+{
+ int delay = 100;
+
+ __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+
+ while (delay--)
+ cpu_relax();
+
+ return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+}
+
+unsigned long long sched_clock(void)
+{
+ unsigned long long v = cnt32_to_63(timer_read());
+ return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR;
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *c = dev_id;
+
+ /* disable and clear pending interrupt status */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+ __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+ c->event_handler(c);
+ return IRQ_HANDLED;
+}
+
+static int timer_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ unsigned long flags, next;
+
+ local_irq_save(flags);
+
+ /* clear pending interrupt status and enable */
+ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+
+ next = timer_read() + delta;
+ __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+static void timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /* disable the matching interrupt */
+ __raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ }
+ local_irq_restore(flags);
+}
+
+static struct clock_event_device ckevt = {
+ .name = "clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 200,
+ .set_next_event = timer_set_next_event,
+ .set_mode = timer_set_mode,
+};
+
+static cycle_t clksrc_read(void)
+{
+ return timer_read();
+}
+
+static struct clocksource cksrc = {
+ .name = "clocksource",
+ .shift = 20,
+ .rating = 200,
+ .read = clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init timer_config(void)
+{
+ uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+ uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
+ uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
+
+ __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+
+ ccr &= TMR_CCR_CS_0(0x3);
+ __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+
+ /* free-running mode */
+ __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+
+ /* enable timer counter */
+ __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+}
+
+static struct irqaction timer_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = timer_interrupt,
+ .dev_id = &ckevt,
+};
+
+void __init timer_init(int irq)
+{
+ timer_config();
+
+ set_tcr2ns_scale(CLOCK_TICK_RATE);
+
+ ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
+ ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
+ ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
+ ckevt.cpumask = cpumask_of(0);
+
+ cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift);
+
+ setup_irq(irq, &timer_irq);
+
+ clocksource_register(&cksrc);
+ clockevents_register_device(&ckevt);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/ttc_dkb.c
+ *
+ * Support for the Marvell PXA910-based TTC_DKB Development Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa910.h>
+#include <mach/pxa910.h>
+
+#include "common.h"
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+static unsigned long ttc_dkb_pin_config[] __initdata = {
+ /* UART2 */
+ GPIO47_UART2_RXD,
+ GPIO48_UART2_TXD,
+};
+
+static void __init ttc_dkb_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
+
+ /* on-chip devices */
+ pxa910_add_uart(1);
+}
+
+MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa910_init_irq,
+ .timer = &pxa910_timer,
+ .init_machine = ttc_dkb_init,
+MACHINE_END
void arch_idle(void);
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
for (;;) ; /* depends on IPC w/ other core */
}
Say 'Y' here if you want your kernel to support the
Marvell DB-78x00-BP Development Board.
+config MACH_RD78X00_MASA
+ bool "Marvell RD-78x00-mASA Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-78x00-mASA Reference Design.
+
endmenu
endif
obj-y += common.o addr-map.o irq.o pcie.o
obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
+obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
+#include <linux/ethtool.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
{
+ u32 dev, rev;
+
eth_data->shared = &mv78xx0_ge10_shared;
mv78xx0_ge10.dev.platform_data = eth_data;
+ /*
+ * On the Z0, ge10 and ge11 are internally connected back
+ * to back, and not brought out.
+ */
+ mv78xx0_pcie_id(&dev, &rev);
+ if (dev == MV78X00_Z0_DEV_ID) {
+ eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+ eth_data->speed = SPEED_1000;
+ eth_data->duplex = DUPLEX_FULL;
+ }
+
platform_device_register(&mv78xx0_ge10_shared);
platform_device_register(&mv78xx0_ge10);
}
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
{
+ u32 dev, rev;
+
eth_data->shared = &mv78xx0_ge11_shared;
mv78xx0_ge11.dev.platform_data = eth_data;
+ /*
+ * On the Z0, ge10 and ge11 are internally connected back
+ * to back, and not brought out.
+ */
+ mv78xx0_pcie_id(&dev, &rev);
+ if (dev == MV78X00_Z0_DEV_ID) {
+ eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+ eth_data->speed = SPEED_1000;
+ eth_data->duplex = DUPLEX_FULL;
+ }
+
platform_device_register(&mv78xx0_ge11_shared);
platform_device_register(&mv78xx0_ge11);
}
+/*****************************************************************************
+ * I2C bus 0
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource mv78xx0_i2c_0_resources[] = {
+ {
+ .name = "i2c 0 base",
+ .start = I2C_0_PHYS_BASE,
+ .end = I2C_0_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c 0 irq",
+ .start = IRQ_MV78XX0_I2C_0,
+ .end = IRQ_MV78XX0_I2C_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct platform_device mv78xx0_i2c_0 = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv78xx0_i2c_0_resources),
+ .resource = mv78xx0_i2c_0_resources,
+ .dev = {
+ .platform_data = &mv78xx0_i2c_0_pdata,
+ },
+};
+
+/*****************************************************************************
+ * I2C bus 1
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource mv78xx0_i2c_1_resources[] = {
+ {
+ .name = "i2c 1 base",
+ .start = I2C_1_PHYS_BASE,
+ .end = I2C_1_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c 1 irq",
+ .start = IRQ_MV78XX0_I2C_1,
+ .end = IRQ_MV78XX0_I2C_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct platform_device mv78xx0_i2c_1 = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv78xx0_i2c_1_resources),
+ .resource = mv78xx0_i2c_1_resources,
+ .dev = {
+ .platform_data = &mv78xx0_i2c_1_pdata,
+ },
+};
+
+void __init mv78xx0_i2c_init(void)
+{
+ platform_device_register(&mv78xx0_i2c_0);
+ platform_device_register(&mv78xx0_i2c_1);
+}
/*****************************************************************************
* SATA
/*****************************************************************************
* General
****************************************************************************/
+static char * __init mv78xx0_id(void)
+{
+ u32 dev, rev;
+
+ mv78xx0_pcie_id(&dev, &rev);
+
+ if (dev == MV78X00_Z0_DEV_ID) {
+ if (rev == MV78X00_REV_Z0)
+ return "MV78X00-Z0";
+ else
+ return "MV78X00-Rev-Unsupported";
+ } else if (dev == MV78100_DEV_ID) {
+ if (rev == MV78100_REV_A0)
+ return "MV78100-A0";
+ else
+ return "MV78100-Rev-Unsupported";
+ } else if (dev == MV78200_DEV_ID) {
+ if (rev == MV78100_REV_A0)
+ return "MV78200-A0";
+ else
+ return "MV78200-Rev-Unsupported";
+ } else {
+ return "Device-Unknown";
+ }
+}
+
static int __init is_l2_writethrough(void)
{
return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
tclk = get_tclk();
- printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
+ printk(KERN_INFO "%s ", mv78xx0_id());
+ printk("core #%d, ", core_index);
printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
int maj, int min);
+void mv78xx0_pcie_id(u32 *dev, u32 *rev);
+
void mv78xx0_ehci0_init(void);
void mv78xx0_ehci1_init(void);
void mv78xx0_ehci2_init(void);
void mv78xx0_uart1_init(void);
void mv78xx0_uart2_init(void);
void mv78xx0_uart3_init(void);
+void mv78xx0_i2c_init(void);
extern struct sys_timer mv78xx0_timer;
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
+#include <linux/i2c.h>
#include <mach/mv78xx0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct mv643xx_eth_platform_data db78x00_ge10_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
+ .phy_addr = MV643XX_ETH_PHY_ADDR(10),
};
static struct mv643xx_eth_platform_data db78x00_ge11_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
static struct mv_sata_platform_data db78x00_sata_data = {
.n_ports = 2,
};
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+ I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
static void __init db78x00_init(void)
{
/*
mv78xx0_sata_init(&db78x00_sata_data);
mv78xx0_uart0_init();
mv78xx0_uart2_init();
+ mv78xx0_i2c_init();
+ i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
} else {
mv78xx0_uart1_init();
mv78xx0_uart3_init();
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID 0x6381
+#define MV78X00_REV_Z0 1
+
+#define MV78100_DEV_ID 0x7810
+#define MV78100_REV_A0 1
+
+#define MV78200_DEV_ID 0x7820
+#define MV78200_REV_A0 1
+
/*
* Register Map
*/
#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
+#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
+#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100)
#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
static struct resource pcie_mem_space;
+void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
+{
+ *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
+ *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+}
+
static void __init mv78xx0_pcie_preinit(void)
{
int i;
--- /dev/null
+/*
+ * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
+ *
+ * Marvell RD-78x00-mASA Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(9),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
+};
+
+static struct mv_sata_platform_data rd78x00_masa_sata_data = {
+ .n_ports = 2,
+};
+
+static void __init rd78x00_masa_init(void)
+{
+ /*
+ * Basic MV78x00 setup. Needs to be called early.
+ */
+ mv78xx0_init();
+
+ /*
+ * Partition on-chip peripherals between the two CPU cores.
+ */
+ if (mv78xx0_core_index() == 0) {
+ mv78xx0_ehci0_init();
+ mv78xx0_ehci1_init();
+ mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
+ mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
+ mv78xx0_sata_init(&rd78x00_masa_sata_data);
+ mv78xx0_uart0_init();
+ mv78xx0_uart2_init();
+ } else {
+ mv78xx0_ehci2_init();
+ mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
+ mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
+ mv78xx0_uart1_init();
+ mv78xx0_uart3_init();
+ }
+}
+
+static int __init rd78x00_pci_init(void)
+{
+ /*
+ * Assign all PCIe devices to CPU core #0.
+ */
+ if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
+ mv78xx0_pcie_init(1, 1);
+
+ return 0;
+}
+subsys_initcall(rd78x00_pci_init);
+
+MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .phys_io = MV78XX0_REGS_PHYS_BASE,
+ .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = rd78x00_masa_init,
+ .map_io = mv78xx0_map_io,
+ .init_irq = mv78xx0_init_irq,
+ .timer = &mv78xx0_timer,
+MACHINE_END
if ARCH_MX1
-comment "MX1 Platforms"
+comment "MX1 platforms:"
config MACH_MXLADS
bool
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
+config MACH_SCB9328
+ bool "Synertronixx scb9328"
+ help
+ Say Y here if you are using a Synertronixx scb9328 board
+
endif
# Specific board support
obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
#include <mach/clock.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include "crm_regs.h"
static int _clk_enable(struct clk *clk)
return clk->parent->set_rate(clk->parent, rate);
}
-/*
- * get the system pll clock in Hz
- *
- * mfi + mfn / (mfd +1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref)
-{
- unsigned long long ll;
- unsigned long quot;
-
- u32 mfi = (pll >> 10) & 0xf;
- u32 mfn = pll & 0x3ff;
- u32 mfd = (pll >> 16) & 0x3ff;
- u32 pd = (pll >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- ll = 2 * (unsigned long long)f_ref *
- ((mfi << 16) + (mfn << 16) / (mfd + 1));
- quot = (pd + 1) * (1 << 16);
- ll += quot / 2;
- do_div(ll, quot);
- return (unsigned long)ll;
-}
-
static unsigned long clk16m_get_rate(struct clk *clk)
{
return 16000000;
static unsigned long system_clk_get_rate(struct clk *clk)
{
- return mx1_decode_pll(__raw_readl(CCM_SPCTL0),
+ return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
clk_get_rate(clk->parent));
}
static unsigned long mcu_clk_get_rate(struct clk *clk)
{
- return mx1_decode_pll(__raw_readl(CCM_MPCTL0),
+ return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
clk_get_rate(clk->parent));
}
};
static struct clk dma_clk = {
- .name = "dma_clk",
+ .name = "dma",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk uart_clk = {
- .name = "uart_clk",
+ .name = "uart",
.parent = &perclk[0],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
&rtc_clk,
};
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx1_clocks_init(unsigned long fref)
{
struct clk **clkp;
unsigned int reg;
clk_enable(&hclk);
clk_enable(&fclk);
+ mxc_timer_init(&gpt_clk);
+
return 0;
}
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-
#include <mach/irqs.h>
#include <mach/hardware.h>
+#include "devices.h"
+
static struct resource imx_csi_resources[] = {
[0] = {
.start = 0x00224000,
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/irqs.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux.h>
#include "devices.h"
/*
.num_resources = 1,
};
+/*
+ * I2C
+ */
+
+#ifdef CONFIG_I2C_IMX
+static int i2c_pins[] = {
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
+};
+
+static int i2c_init(struct device *dev)
+{
+ return mxc_gpio_setup_multiple_pins(i2c_pins,
+ ARRAY_SIZE(i2c_pins), "I2C");
+}
+
+static void i2c_exit(struct device *dev)
+{
+ mxc_gpio_release_multiple_pins(i2c_pins,
+ ARRAY_SIZE(i2c_pins));
+}
+
+static struct pcf857x_platform_data pcf857x_data[] = {
+ {
+ .gpio_base = 4 * 32,
+ }, {
+ .gpio_base = 4 * 32 + 16,
+ }
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+ .bitrate = 100000,
+ .init = i2c_init,
+ .exit = i2c_exit,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf857x", 0x22),
+ .type = "pcf8575",
+ .platform_data = &pcf857x_data[0],
+ }, {
+ I2C_BOARD_INFO("pcf857x", 0x24),
+ .type = "pcf8575",
+ .platform_data = &pcf857x_data[1],
+ },
+};
+#endif
+
/*
* Board init
*/
/* Physmap flash */
mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+ /* I2C */
+#ifdef CONFIG_I2C_IMX
+ i2c_register_board_info(0, mx1ads_i2c_devices,
+ ARRAY_SIZE(mx1ads_i2c_devices));
+
+ mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+#endif
}
static void __init mx1ads_timer_init(void)
{
- mxc_clocks_init(32000);
- mxc_timer_init("gpt_clk");
+ mx1_clocks_init(32000);
}
struct sys_timer mx1ads_timer = {
--- /dev/null
+/*
+ * linux/arch/arm/mach-mx1/scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+ .start = IMX_CS0_PHYS,
+ .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+ .width = 2,
+};
+
+static struct platform_device scb_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &scb_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+ [0] = {
+ .name = "address area",
+ .start = IMX_CS5_PHYS,
+ .end = IMX_CS5_PHYS + 1,
+ .flags = IORESOURCE_MEM /* address access */
+ },
+ [1] = {
+ .name = "data area",
+ .start = IMX_CS5_PHYS + 4,
+ .end = IMX_CS5_PHYS + 5,
+ .flags = IORESOURCE_MEM /* data access */
+ },
+ [2] = {
+ .start = IRQ_GPIOC(3),
+ .end = IRQ_GPIOC(3),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+ },
+};
+
+static struct platform_device dm9000x_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000x_resources),
+ .resource = dm9000x_resources,
+ .dev = {
+ .platform_data = &dm9000_platdata,
+ }
+};
+
+static int mxc_uart1_pins[] = {
+ PC9_PF_UART1_CTS,
+ PC10_PF_UART1_RTS,
+ PC11_PF_UART1_TXD,
+ PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+ mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins));
+ return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+ .init = uart1_mxc_init,
+ .exit = uart1_mxc_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &scb_flash_device,
+ &dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+ mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+ printk(KERN_INFO"Scb9328: Adding devices\n");
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+ mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+ .init = scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+ /* Sascha Hauer */
+ .phys_io = 0x00200000,
+ .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
+ .boot_params = 0x08000100,
+ .map_io = mxc_map_io,
+ .init_irq = mxc_init_irq,
+ .timer = &scb9328_timer,
+ .init_machine = scb9328_init,
+MACHINE_END
-comment "MX2 family CPU support"
- depends on ARCH_MX2
+if ARCH_MX2
+
+choice
+ prompt "CPUs:"
+ default MACH_MX21
+
+config MACH_MX21
+ bool "i.MX21 support"
+ help
+ This enables support for Freescale's MX2 based i.MX21 processor.
config MACH_MX27
bool "i.MX27 support"
- depends on ARCH_MX2
help
This enables support for Freescale's MX2 based i.MX27 processor.
-comment "MX2 Platforms"
- depends on ARCH_MX2
+endchoice
+
+comment "MX2 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
PCM970 evaluation board.
endchoice
+
+endif
obj-y := system.o generic.o devices.o serial.o
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
- zreladdr-y := 0xA0008000
-params_phys-y := 0xA0000100
-initrd_phys-y := 0xA0800000
+zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000
+params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
+initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
+
+zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000
+params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
+initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
--- /dev/null
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+static int _clk_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+ return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_CSCR);
+ reg |= CCM_CSCR_SPEN;
+ __raw_writel(reg, CCM_CSCR);
+
+ while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+ ;
+ return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_CSCR);
+ reg &= ~CCM_CSCR_SPEN;
+ __raw_writel(reg, CCM_CSCR);
+}
+
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > 64)
+ div = 64;
+
+ return parent_rate / div;
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->id < 0 || clk->id > 3)
+ return -EINVAL;
+
+ div = parent_rate / rate;
+ if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg =
+ __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+ (clk->id << 3));
+ reg |= div << (clk->id << 3);
+ __raw_writel(reg, CCM_PCDR1);
+
+ return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+ unsigned long usb_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+ return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
+{
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
+
+ return 2UL * parent_rate / pdf;
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+ return _clk_ssix_recalc(clk,
+ (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
+ >> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+ return _clk_ssix_recalc(clk,
+ (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+ CCM_PCDR0_SSI2BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+ unsigned long nfc_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
+ >> CCM_PCDR0_NFCDIV_OFFSET;
+
+ return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->parent->set_rate(clk->parent, rate);
+}
+
+static unsigned long external_high_reference; /* in Hz */
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz.
+ */
+static struct clk ckih_clk = {
+ .get_rate = get_high_reference_clock_rate,
+};
+
+static unsigned long external_low_reference; /* in Hz */
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+ .get_rate = get_low_reference_clock_rate,
+};
+
+
+static unsigned long _clk_fpm_recalc(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) * 512;
+}
+
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+ .parent = &ckil_clk,
+ .get_rate = _clk_fpm_recalc,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+ uint32_t reg;
+ unsigned long ref_clk;
+ unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+ unsigned long long temp;
+
+ ref_clk = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(CCM_MPCTL0);
+ pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
+ mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+ mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+ mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+ mfi = (mfi <= 5) ? 5 : mfi;
+ temp = 2LL * ref_clk * mfn;
+ do_div(temp, mfd + 1);
+ temp = 2LL * ref_clk * mfi + temp;
+ do_div(temp, pdf + 1);
+
+ return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_fclk_get_rate(struct clk *clk)
+{
+ unsigned long parent_rate;
+ u32 div;
+
+ div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+ parent_rate = clk_get_rate(clk->parent);
+
+ return parent_rate / (div+1);
+}
+
+static struct clk fclk_clk = {
+ .parent = &mpll_clk,
+ .get_rate = _clk_fclk_get_rate
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+ uint32_t reg;
+ unsigned long ref_clk;
+ unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+ unsigned long long temp;
+
+ ref_clk = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(CCM_SPCTL0);
+ pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+ mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+ mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+ mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+ mfi = (mfi <= 5) ? 5 : mfi;
+ temp = 2LL * ref_clk * mfn;
+ do_div(temp, mfd + 1);
+ temp = 2LL * ref_clk * mfi + temp;
+ do_div(temp, pdf + 1);
+
+ return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = get_spll_clk,
+ .enable = _clk_spll_enable,
+ .disable = _clk_spll_disable,
+};
+
+static unsigned long get_hclk_clk(struct clk *clk)
+{
+ unsigned long rate;
+ unsigned long bclk_pdf;
+
+ bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+ >> CCM_CSCR_BCLK_OFFSET;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (bclk_pdf + 1);
+}
+
+static struct clk hclk_clk = {
+ .parent = &fclk_clk,
+ .get_rate = get_hclk_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+ unsigned long rate;
+ unsigned long ipg_pdf;
+
+ ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+ .parent = &hclk_clk,
+ .get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+ unsigned long perclk_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->id < 0 || clk->id > 3)
+ return 0;
+
+ perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+ return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+ {
+ .id = 0,
+ .parent = &mpll_clk,
+ .get_rate = _clk_perclkx_recalc,
+ }, {
+ .id = 1,
+ .parent = &mpll_clk,
+ .get_rate = _clk_perclkx_recalc,
+ }, {
+ .id = 2,
+ .parent = &mpll_clk,
+ .round_rate = _clk_perclkx_round_rate,
+ .set_rate = _clk_perclkx_set_rate,
+ .get_rate = _clk_perclkx_recalc,
+ /* Enable/Disable done via lcd_clkc[1] */
+ }, {
+ .id = 3,
+ .parent = &mpll_clk,
+ .round_rate = _clk_perclkx_round_rate,
+ .set_rate = _clk_perclkx_set_rate,
+ .get_rate = _clk_perclkx_recalc,
+ /* Enable/Disable done via csi_clk[1] */
+ },
+};
+
+static struct clk uart_ipg_clk[];
+
+static struct clk uart_clk[] = {
+ {
+ .id = 0,
+ .parent = &per_clk[0],
+ .secondary = &uart_ipg_clk[0],
+ }, {
+ .id = 1,
+ .parent = &per_clk[0],
+ .secondary = &uart_ipg_clk[1],
+ }, {
+ .id = 2,
+ .parent = &per_clk[0],
+ .secondary = &uart_ipg_clk[2],
+ }, {
+ .id = 3,
+ .parent = &per_clk[0],
+ .secondary = &uart_ipg_clk[3],
+ },
+};
+
+static struct clk uart_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_UART1_REG,
+ .enable_shift = CCM_PCCR_UART1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_UART2_REG,
+ .enable_shift = CCM_PCCR_UART2_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_UART3_REG,
+ .enable_shift = CCM_PCCR_UART3_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 3,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_UART4_REG,
+ .enable_shift = CCM_PCCR_UART4_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk gpt_ipg_clk[];
+
+static struct clk gpt_clk[] = {
+ {
+ .id = 0,
+ .parent = &per_clk[0],
+ .secondary = &gpt_ipg_clk[0],
+ }, {
+ .id = 1,
+ .parent = &per_clk[0],
+ .secondary = &gpt_ipg_clk[1],
+ }, {
+ .id = 2,
+ .parent = &per_clk[0],
+ .secondary = &gpt_ipg_clk[2],
+ },
+};
+
+static struct clk gpt_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_GPT1_REG,
+ .enable_shift = CCM_PCCR_GPT1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_GPT2_REG,
+ .enable_shift = CCM_PCCR_GPT2_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_GPT3_REG,
+ .enable_shift = CCM_PCCR_GPT3_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk pwm_clk[] = {
+ {
+ .parent = &per_clk[0],
+ .secondary = &pwm_clk[1],
+ }, {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_PWM_REG,
+ .enable_shift = CCM_PCCR_PWM_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk sdhc_ipg_clk[];
+
+static struct clk sdhc_clk[] = {
+ {
+ .id = 0,
+ .parent = &per_clk[1],
+ .secondary = &sdhc_ipg_clk[0],
+ }, {
+ .id = 1,
+ .parent = &per_clk[1],
+ .secondary = &sdhc_ipg_clk[1],
+ },
+};
+
+static struct clk sdhc_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SDHC1_REG,
+ .enable_shift = CCM_PCCR_SDHC1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SDHC2_REG,
+ .enable_shift = CCM_PCCR_SDHC2_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk cspi_ipg_clk[];
+
+static struct clk cspi_clk[] = {
+ {
+ .id = 0,
+ .parent = &per_clk[1],
+ .secondary = &cspi_ipg_clk[0],
+ }, {
+ .id = 1,
+ .parent = &per_clk[1],
+ .secondary = &cspi_ipg_clk[1],
+ }, {
+ .id = 2,
+ .parent = &per_clk[1],
+ .secondary = &cspi_ipg_clk[2],
+ },
+};
+
+static struct clk cspi_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_CSPI1_REG,
+ .enable_shift = CCM_PCCR_CSPI1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_CSPI2_REG,
+ .enable_shift = CCM_PCCR_CSPI2_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 3,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_CSPI3_REG,
+ .enable_shift = CCM_PCCR_CSPI3_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk lcdc_clk[] = {
+ {
+ .parent = &per_clk[2],
+ .secondary = &lcdc_clk[1],
+ .round_rate = _clk_parent_round_rate,
+ .set_rate = _clk_parent_set_rate,
+ }, {
+ .parent = &ipg_clk,
+ .secondary = &lcdc_clk[2],
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_LCDC_REG,
+ .enable_shift = CCM_PCCR_LCDC_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_LCDC_REG,
+ .enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk csi_clk[] = {
+ {
+ .parent = &per_clk[3],
+ .secondary = &csi_clk[1],
+ .round_rate = _clk_parent_round_rate,
+ .set_rate = _clk_parent_set_rate,
+ }, {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_CSI_REG,
+ .enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk usb_clk[] = {
+ {
+ .parent = &spll_clk,
+ .get_rate = _clk_usb_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_USBOTG_REG,
+ .enable_shift = CCM_PCCR_USBOTG_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
+ .enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
+ .disable = _clk_disable,
+ }
+};
+
+static struct clk ssi_ipg_clk[];
+
+static struct clk ssi_clk[] = {
+ {
+ .id = 0,
+ .parent = &mpll_clk,
+ .secondary = &ssi_ipg_clk[0],
+ .get_rate = _clk_ssi1_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SSI1_BAUD_REG,
+ .enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &mpll_clk,
+ .secondary = &ssi_ipg_clk[1],
+ .get_rate = _clk_ssi2_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SSI2_BAUD_REG,
+ .enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk ssi_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SSI1_REG,
+ .enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SSI2_REG,
+ .enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+
+static struct clk nfc_clk = {
+ .parent = &fclk_clk,
+ .get_rate = _clk_nfc_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_NFC_REG,
+ .enable_shift = CCM_PCCR_NFC_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk dma_clk[] = {
+ {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_DMA_REG,
+ .enable_shift = CCM_PCCR_DMA_OFFSET,
+ .disable = _clk_disable,
+ .secondary = &dma_clk[1],
+ }, {
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_DMA_REG,
+ .enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk brom_clk = {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_BROM_REG,
+ .enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk emma_clk[] = {
+ {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_EMMA_REG,
+ .enable_shift = CCM_PCCR_EMMA_OFFSET,
+ .disable = _clk_disable,
+ .secondary = &emma_clk[1],
+ }, {
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_EMMA_REG,
+ .enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
+ .disable = _clk_disable,
+ }
+};
+
+static struct clk slcdc_clk[] = {
+ {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SLCDC_REG,
+ .enable_shift = CCM_PCCR_SLCDC_OFFSET,
+ .disable = _clk_disable,
+ .secondary = &slcdc_clk[1],
+ }, {
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
+ .enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
+ .disable = _clk_disable,
+ }
+};
+
+static struct clk wdog_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_WDT_REG,
+ .enable_shift = CCM_PCCR_WDT_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_GPIO_REG,
+ .enable_shift = CCM_PCCR_GPIO_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk i2c_clk = {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_I2C1_REG,
+ .enable_shift = CCM_PCCR_I2C1_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_KPP_REG,
+ .enable_shift = CCM_PCCR_KPP_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_OWIRE_REG,
+ .enable_shift = CCM_PCCR_OWIRE_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_RTC_REG,
+ .enable_shift = CCM_PCCR_RTC_OFFSET,
+ .disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > 8)
+ div = 8;
+
+ return parent_rate / div;
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg = __raw_readl(CCM_PCDR0);
+
+ if (clk->parent == &usb_clk[0]) {
+ reg &= ~CCM_PCDR0_48MDIV_MASK;
+ reg |= div << CCM_PCDR0_48MDIV_OFFSET;
+ }
+ __raw_writel(reg, CCM_PCDR0);
+
+ return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+ u32 div = 0;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->parent == &usb_clk[0]) /* 48M */
+ div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
+ >> CCM_PCDR0_48MDIV_OFFSET;
+ div++;
+
+ return parent_rate / div;
+}
+
+static struct clk clko_clk;
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+ if (parent == &ckil_clk)
+ reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &fpm_clk)
+ reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ckih_clk)
+ reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == mpll_clk.parent)
+ reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == spll_clk.parent)
+ reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &mpll_clk)
+ reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &spll_clk)
+ reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &fclk_clk)
+ reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &hclk_clk)
+ reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ipg_clk)
+ reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[0])
+ reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[1])
+ reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[2])
+ reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[3])
+ reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ssi_clk[0])
+ reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ssi_clk[1])
+ reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &nfc_clk)
+ reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &usb_clk[0])
+ reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &clko_clk)
+ reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, CCM_CCSR);
+
+ return 0;
+}
+
+static struct clk clko_clk = {
+ .get_rate = _clk_clko_recalc,
+ .set_rate = _clk_clko_set_rate,
+ .round_rate = _clk_clko_round_rate,
+ .set_parent = _clk_clko_set_parent,
+};
+
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+static struct clk_lookup lookups[] __initdata = {
+/* It's unlikely that any driver wants one of them directly:
+ _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+ _REGISTER_CLOCK(NULL, "ckil", ckil_clk)
+ _REGISTER_CLOCK(NULL, "fpm", fpm_clk)
+ _REGISTER_CLOCK(NULL, "mpll", mpll_clk)
+ _REGISTER_CLOCK(NULL, "spll", spll_clk)
+ _REGISTER_CLOCK(NULL, "fclk", fclk_clk)
+ _REGISTER_CLOCK(NULL, "hclk", hclk_clk)
+ _REGISTER_CLOCK(NULL, "ipg", ipg_clk)
+*/
+ _REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
+ _REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
+ _REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
+ _REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
+ _REGISTER_CLOCK(NULL, "clko", clko_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
+ _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
+ _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
+ _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
+ _REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
+ _REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
+ _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
+ _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
+ _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
+ _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+ _REGISTER_CLOCK(NULL, "csi", csi_clk[0])
+ _REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+ _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
+ _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
+ _REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+ _REGISTER_CLOCK(NULL, "dma", dma_clk[0])
+ _REGISTER_CLOCK(NULL, "brom", brom_clk)
+ _REGISTER_CLOCK(NULL, "emma", emma_clk[0])
+ _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
+ _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+ _REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+ _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+ _REGISTER_CLOCK(NULL, "owire", owire_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+};
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ int i;
+ u32 cscr;
+
+ external_low_reference = lref;
+ external_high_reference = href;
+
+ /* detect clock reference for both system PLL */
+ cscr = CSCR();
+ if (cscr & CCM_CSCR_MCU)
+ mpll_clk.parent = &ckih_clk;
+ else
+ mpll_clk.parent = &fpm_clk;
+
+ if (cscr & CCM_CSCR_SP)
+ spll_clk.parent = &ckih_clk;
+ else
+ spll_clk.parent = &fpm_clk;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* Turn off all clock gates */
+ __raw_writel(0, CCM_PCCR0);
+ __raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
+
+ /* This turns of the serial PLL as well */
+ spll_clk.disable(&spll_clk);
+
+ /* This will propagate to all children and init all the clock rates. */
+ clk_enable(&per_clk[0]);
+ clk_enable(&gpio_clk);
+
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+ clk_enable(&uart_clk[0]);
+#endif
+
+ mxc_timer_init(&gpt_clk[0]);
+ return 0;
+}
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include <asm/clkdev.h>
#include <asm/div64.h>
-#include "crm_regs.h"
-
-static struct clk ckil_clk;
-static struct clk mpll_clk;
-static struct clk mpll_main_clk[];
-static struct clk spll_clk;
-
-static int _clk_enable(struct clk *clk)
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+/* Register offsets */
+#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
+#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
+#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
+#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
+#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
+#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
+#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
+#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
+#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
+#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
+#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
+#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
+#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
+#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+
+#define CCM_CSCR_UPDATE_DIS (1 << 31)
+#define CCM_CSCR_SSI2 (1 << 23)
+#define CCM_CSCR_SSI1 (1 << 22)
+#define CCM_CSCR_VPU (1 << 21)
+#define CCM_CSCR_MSHC (1 << 20)
+#define CCM_CSCR_SPLLRES (1 << 19)
+#define CCM_CSCR_MPLLRES (1 << 18)
+#define CCM_CSCR_SP (1 << 17)
+#define CCM_CSCR_MCU (1 << 16)
+#define CCM_CSCR_OSC26MDIV (1 << 4)
+#define CCM_CSCR_OSC26M (1 << 3)
+#define CCM_CSCR_FPM (1 << 2)
+#define CCM_CSCR_SPEN (1 << 1)
+#define CCM_CSCR_MPEN (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC (1 << 15)
+
+#define CCM_SPCTL1_LF (1 << 15)
+#define CCM_SPCTL1_BRMO (1 << 6)
+
+static struct clk mpll_main1_clk, mpll_main2_clk;
+
+static int clk_pccr_enable(struct clk *clk)
{
unsigned long reg;
+ if (!clk->enable_reg)
+ return 0;
+
reg = __raw_readl(clk->enable_reg);
reg |= 1 << clk->enable_shift;
__raw_writel(reg, clk->enable_reg);
return 0;
}
-static void _clk_disable(struct clk *clk)
+static void clk_pccr_disable(struct clk *clk)
{
unsigned long reg;
+ if (!clk->enable_reg)
+ return;
+
reg = __raw_readl(clk->enable_reg);
reg &= ~(1 << clk->enable_shift);
__raw_writel(reg, clk->enable_reg);
}
-static int _clk_spll_enable(struct clk *clk)
+static int clk_spll_enable(struct clk *clk)
{
unsigned long reg;
reg |= CCM_CSCR_SPEN;
__raw_writel(reg, CCM_CSCR);
- while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
- ;
+ while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
return 0;
}
-static void _clk_spll_disable(struct clk *clk)
+static void clk_spll_disable(struct clk *clk)
{
unsigned long reg;
__raw_writel(reg, CCM_CSCR);
}
-static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR0);
- reg |= mask0;
- __raw_writel(reg, CCM_PCCR0);
-
- reg = __raw_readl(CCM_PCCR1);
- reg |= mask1;
- __raw_writel(reg, CCM_PCCR1);
-
-}
-
-static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR0);
- reg &= ~mask0;
- __raw_writel(reg, CCM_PCCR0);
-
- reg = __raw_readl(CCM_PCCR1);
- reg &= ~mask1;
- __raw_writel(reg, CCM_PCCR1);
-}
-
-static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR1);
- reg |= mask1;
- __raw_writel(reg, CCM_PCCR1);
-
- reg = __raw_readl(CCM_PCCR0);
- reg |= mask0;
- __raw_writel(reg, CCM_PCCR0);
-}
-
-static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR1);
- reg &= ~mask1;
- __raw_writel(reg, CCM_PCCR1);
-
- reg = __raw_readl(CCM_PCCR0);
- reg &= ~mask0;
- __raw_writel(reg, CCM_PCCR0);
-}
-
-static int _clk_dma_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
-
- return 0;
-}
-
-static void _clk_dma_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
-}
-
-static int _clk_rtic_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
-
- return 0;
-}
-
-static void _clk_rtic_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
-}
-
-static int _clk_emma_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
-
- return 0;
-}
-
-static void _clk_emma_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
-}
-
-static int _clk_slcdc_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
-
- return 0;
-}
-
-static void _clk_slcdc_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
-}
-
-static int _clk_fec_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
-
- return 0;
-}
-
-static void _clk_fec_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
-}
-
-static int _clk_vpu_enable(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR1);
- reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK;
- __raw_writel(reg, CCM_PCCR1);
-
- return 0;
-}
-
-static void _clk_vpu_disable(struct clk *clk)
+static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR1);
- reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK);
- __raw_writel(reg, CCM_PCCR1);
-}
-
-static int _clk_sahara2_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
-
- return 0;
-}
-
-static void _clk_sahara2_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
-}
-
-static int _clk_mstick1_enable(struct clk *clk)
-{
- _clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
-
- return 0;
-}
-
-static void _clk_mstick1_disable(struct clk *clk)
-{
- _clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
-}
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
- int cscr = CSCR();
+ int cscr = __raw_readl(CCM_CSCR);
if (clk->parent == parent)
return 0;
if (mx27_revision() >= CHIP_REV_2_0) {
- if (parent == &mpll_main_clk[0]) {
+ if (parent == &mpll_main1_clk) {
cscr |= CCM_CSCR_ARM_SRC;
} else {
- if (parent == &mpll_main_clk[1])
+ if (parent == &mpll_main2_clk)
cscr &= ~CCM_CSCR_ARM_SRC;
else
return -EINVAL;
}
__raw_writel(cscr, CCM_CSCR);
- } else
- return -ENODEV;
-
- clk->parent = parent;
- return 0;
+ clk->parent = parent;
+ return 0;
+ }
+ return -ENODEV;
}
-static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
{
int div;
unsigned long parent_rate;
return parent_rate / div;
}
-static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+static int set_rate_cpu(struct clk *clk, unsigned long rate)
{
unsigned int div;
uint32_t reg;
reg = __raw_readl(CCM_CSCR);
if (mx27_revision() >= CHIP_REV_2_0) {
- reg &= ~CCM_CSCR_ARM_MASK;
- reg |= div << CCM_CSCR_ARM_OFFSET;
- reg &= ~0x06;
- __raw_writel(reg | 0x80000000, CCM_CSCR);
+ reg &= ~(3 << 12);
+ reg |= div << 12;
+ reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
+ __raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
} else {
- printk(KERN_ERR "Cant set CPU frequency!\n");
+ printk(KERN_ERR "Can't set CPU frequency!\n");
}
return 0;
}
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
- unsigned long rate)
+static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
{
u32 div;
unsigned long parent_rate;
return parent_rate / div;
}
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+static int set_rate_per(struct clk *clk, unsigned long rate)
{
u32 reg;
u32 div;
return -EINVAL;
div--;
- reg =
- __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
- (clk->id << 3));
+ reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
reg |= div << (clk->id << 3);
__raw_writel(reg, CCM_PCDR1);
return 0;
}
-static unsigned long _clk_usb_recalc(struct clk *clk)
+static unsigned long get_rate_usb(struct clk *clk)
{
unsigned long usb_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
- usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+ usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
return parent_rate / (usb_pdf + 1U);
}
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
+static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
{
- unsigned long ssi1_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
- ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >>
- CCM_PCDR0_SSI1BAUDDIV_OFFSET;
-
if (mx27_revision() >= CHIP_REV_2_0)
- ssi1_pdf += 4;
+ pdf += 4; /* MX27 TO2+ */
else
- ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf;
+ pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
- return 2UL * parent_rate / ssi1_pdf;
+ return 2UL * parent_rate / pdf;
}
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
+static unsigned long get_rate_ssi1(struct clk *clk)
{
- unsigned long ssi2_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
- CCM_PCDR0_SSI2BAUDDIV_OFFSET;
-
- if (mx27_revision() >= CHIP_REV_2_0)
- ssi2_pdf += 4;
- else
- ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf;
+ return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
+}
- return 2UL * parent_rate / ssi2_pdf;
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+ return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
}
-static unsigned long _clk_nfc_recalc(struct clk *clk)
+static unsigned long get_rate_nfc(struct clk *clk)
{
unsigned long nfc_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
- if (mx27_revision() >= CHIP_REV_2_0) {
- nfc_pdf =
- (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >>
- CCM_PCDR0_NFCDIV2_OFFSET;
- } else {
- nfc_pdf =
- (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >>
- CCM_PCDR0_NFCDIV_OFFSET;
- }
+ if (mx27_revision() >= CHIP_REV_2_0)
+ nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
+ else
+ nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
return parent_rate / (nfc_pdf + 1);
}
-static unsigned long _clk_vpu_recalc(struct clk *clk)
+static unsigned long get_rate_vpu(struct clk *clk)
{
unsigned long vpu_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
if (mx27_revision() >= CHIP_REV_2_0) {
- vpu_pdf =
- (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >>
- CCM_PCDR0_VPUDIV2_OFFSET;
+ vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
vpu_pdf += 4;
} else {
- vpu_pdf =
- (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >>
- CCM_PCDR0_VPUDIV_OFFSET;
+ vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
}
+
return 2UL * parent_rate / vpu_pdf;
}
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
{
return clk->parent->round_rate(clk->parent, rate);
}
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+static unsigned long get_rate_parent(struct clk *clk)
+{
+ return clk_get_rate(clk->parent);
+}
+
+static int set_rate_parent(struct clk *clk, unsigned long rate)
{
return clk->parent->set_rate(clk->parent, rate);
}
/* in Hz */
static unsigned long external_high_reference = 26000000;
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
+static unsigned long get_rate_high_reference(struct clk *clk)
{
return external_high_reference;
}
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
- .name = "ckih",
- .get_rate = get_high_reference_clock_rate,
-};
-
/* in Hz */
static unsigned long external_low_reference = 32768;
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
+static unsigned long get_rate_low_reference(struct clk *clk)
{
return external_low_reference;
}
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz Could be changed at runtime
- * with a call to change_external_low_reference()
- */
-static struct clk ckil_clk = {
- .name = "ckil",
- .get_rate = get_low_reference_clock_rate,
-};
-
-static unsigned long get_mpll_clk(struct clk *clk)
+static unsigned long get_rate_fpm(struct clk *clk)
{
- uint32_t reg;
- unsigned long ref_clk;
- unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
- unsigned long long temp;
-
- ref_clk = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_MPCTL0);
- pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
- mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
- mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
- mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
- mfi = (mfi <= 5) ? 5 : mfi;
- temp = 2LL * ref_clk * mfn;
- do_div(temp, mfd + 1);
- temp = 2LL * ref_clk * mfi + temp;
- do_div(temp, pdf + 1);
-
- return (unsigned long)temp;
+ return clk_get_rate(clk->parent) * 1024;
}
-static struct clk mpll_clk = {
- .name = "mpll",
- .parent = &ckih_clk,
- .get_rate = get_mpll_clk,
-};
+static unsigned long get_rate_mpll(struct clk *clk)
+{
+ return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
+ clk_get_rate(clk->parent));
+}
-static unsigned long _clk_mpll_main_get_rate(struct clk *clk)
+static unsigned long get_rate_mpll_main(struct clk *clk)
{
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
/* i.MX27 TO2:
- * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2
- * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3
+ * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
+ * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
*/
-
if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
return 2UL * parent_rate / 3UL;
return parent_rate;
}
-static struct clk mpll_main_clk[] = {
- {
- /* For i.MX27 TO2, it is the MPLL path 1 of ARM core
- * It provide the clock source whose rate is same as MPLL
- */
- .name = "mpll_main",
- .id = 0,
- .parent = &mpll_clk,
- .get_rate = _clk_mpll_main_get_rate
- }, {
- /* For i.MX27 TO2, it is the MPLL path 2 of ARM core
- * It provide the clock source whose rate is same MPLL * 2/3
- */
- .name = "mpll_main",
- .id = 1,
- .parent = &mpll_clk,
- .get_rate = _clk_mpll_main_get_rate
- }
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
+static unsigned long get_rate_spll(struct clk *clk)
{
uint32_t reg;
- unsigned long ref_clk;
- unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
- unsigned long long temp;
+ unsigned long rate;
- ref_clk = clk_get_rate(clk->parent);
+ rate = clk_get_rate(clk->parent);
reg = __raw_readl(CCM_SPCTL0);
- /*TODO: This is TO2 Bug */
+
+ /* On TO2 we have to write the value back. Otherwise we
+ * read 0 from this register the next time.
+ */
if (mx27_revision() >= CHIP_REV_2_0)
__raw_writel(reg, CCM_SPCTL0);
- pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
- mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
- mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
- mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
- mfi = (mfi <= 5) ? 5 : mfi;
- temp = 2LL * ref_clk * mfn;
- do_div(temp, mfd + 1);
- temp = 2LL * ref_clk * mfi + temp;
- do_div(temp, pdf + 1);
-
- return (unsigned long)temp;
+ return mxc_decode_pll(reg, rate);
}
-static struct clk spll_clk = {
- .name = "spll",
- .parent = &ckih_clk,
- .get_rate = get_spll_clk,
- .enable = _clk_spll_enable,
- .disable = _clk_spll_disable,
-};
-
-static unsigned long get_cpu_clk(struct clk *clk)
+static unsigned long get_rate_cpu(struct clk *clk)
{
u32 div;
unsigned long rate;
if (mx27_revision() >= CHIP_REV_2_0)
- div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET;
+ div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
else
- div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+ div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
rate = clk_get_rate(clk->parent);
return rate / (div + 1);
}
-static struct clk cpu_clk = {
- .name = "cpu_clk",
- .parent = &mpll_main_clk[1],
- .set_parent = _clk_cpu_set_parent,
- .round_rate = _clk_cpu_round_rate,
- .get_rate = get_cpu_clk,
- .set_rate = _clk_cpu_set_rate,
-};
-
-static unsigned long get_ahb_clk(struct clk *clk)
+static unsigned long get_rate_ahb(struct clk *clk)
{
- unsigned long rate;
- unsigned long bclk_pdf;
+ unsigned long rate, bclk_pdf;
if (mx27_revision() >= CHIP_REV_2_0)
- bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK)
- >> CCM_CSCR_AHB_OFFSET;
+ bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
else
- bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
- >> CCM_CSCR_BCLK_OFFSET;
+ bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
rate = clk_get_rate(clk->parent);
return rate / (bclk_pdf + 1);
}
-static struct clk ahb_clk = {
- .name = "ahb_clk",
- .parent = &mpll_main_clk[1],
- .get_rate = get_ahb_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
+static unsigned long get_rate_ipg(struct clk *clk)
{
- unsigned long rate;
- unsigned long ipg_pdf;
+ unsigned long rate, ipg_pdf;
if (mx27_revision() >= CHIP_REV_2_0)
return clk_get_rate(clk->parent);
else
- ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+ ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
rate = clk_get_rate(clk->parent);
return rate / (ipg_pdf + 1);
}
-static struct clk ipg_clk = {
- .name = "ipg_clk",
- .parent = &ahb_clk,
- .get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
+static unsigned long get_rate_per(struct clk *clk)
{
- unsigned long perclk_pdf;
- unsigned long parent_rate;
+ unsigned long perclk_pdf, parent_rate;
parent_rate = clk_get_rate(clk->parent);
if (clk->id < 0 || clk->id > 3)
return 0;
- perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+ perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
return parent_rate / (perclk_pdf + 1);
}
-static struct clk per_clk[] = {
- {
- .name = "per_clk",
- .id = 0,
- .parent = &mpll_main_clk[1],
- .get_rate = _clk_perclkx_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_PERCLK1_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "per_clk",
- .id = 1,
- .parent = &mpll_main_clk[1],
- .get_rate = _clk_perclkx_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_PERCLK2_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "per_clk",
- .id = 2,
- .parent = &mpll_main_clk[1],
- .round_rate = _clk_perclkx_round_rate,
- .set_rate = _clk_perclkx_set_rate,
- .get_rate = _clk_perclkx_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_PERCLK3_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "per_clk",
- .id = 3,
- .parent = &mpll_main_clk[1],
- .round_rate = _clk_perclkx_round_rate,
- .set_rate = _clk_perclkx_set_rate,
- .get_rate = _clk_perclkx_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_PERCLK4_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart1_clk[] = {
- {
- .name = "uart_clk",
- .id = 0,
- .parent = &per_clk[0],
- .secondary = &uart1_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART1_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart2_clk[] = {
- {
- .name = "uart_clk",
- .id = 1,
- .parent = &per_clk[0],
- .secondary = &uart2_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart3_clk[] = {
- {
- .name = "uart_clk",
- .id = 2,
- .parent = &per_clk[0],
- .secondary = &uart3_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart4_clk[] = {
- {
- .name = "uart_clk",
- .id = 3,
- .parent = &per_clk[0],
- .secondary = &uart4_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 3,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART4_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart5_clk[] = {
- {
- .name = "uart_clk",
- .id = 4,
- .parent = &per_clk[0],
- .secondary = &uart5_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 4,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART5_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart6_clk[] = {
- {
- .name = "uart_clk",
- .id = 5,
- .parent = &per_clk[0],
- .secondary = &uart6_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 5,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART6_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt1_clk[] = {
- {
- .name = "gpt_clk",
- .id = 0,
- .parent = &per_clk[0],
- .secondary = &gpt1_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT1_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt2_clk[] = {
- {
- .name = "gpt_clk",
- .id = 1,
- .parent = &per_clk[0],
- .secondary = &gpt2_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt3_clk[] = {
- {
- .name = "gpt_clk",
- .id = 2,
- .parent = &per_clk[0],
- .secondary = &gpt3_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt4_clk[] = {
- {
- .name = "gpt_clk",
- .id = 3,
- .parent = &per_clk[0],
- .secondary = &gpt4_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 3,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT4_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt5_clk[] = {
- {
- .name = "gpt_clk",
- .id = 4,
- .parent = &per_clk[0],
- .secondary = &gpt5_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 4,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT5_OFFSET,
- .disable = _clk_disable,
- },
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz. Could be changed at runtime
+ * with a call to change_external_high_reference()
+ */
+static struct clk ckih_clk = {
+ .get_rate = get_rate_high_reference,
};
-static struct clk gpt6_clk[] = {
- {
- .name = "gpt_clk",
- .id = 5,
- .parent = &per_clk[0],
- .secondary = &gpt6_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 5,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT6_OFFSET,
- .disable = _clk_disable,
- },
+static struct clk mpll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = get_rate_mpll,
};
-static struct clk pwm_clk[] = {
- {
- .name = "pwm_clk",
- .parent = &per_clk[0],
- .secondary = &pwm_clk[1],
- }, {
- .name = "pwm_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_PWM_OFFSET,
- .disable = _clk_disable,
- },
+/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+ * It provides the clock source whose rate is same as MPLL
+ */
+static struct clk mpll_main1_clk = {
+ .id = 0,
+ .parent = &mpll_clk,
+ .get_rate = get_rate_mpll_main,
};
-static struct clk sdhc1_clk[] = {
- {
- .name = "sdhc_clk",
- .id = 0,
- .parent = &per_clk[1],
- .secondary = &sdhc1_clk[1],
- }, {
- .name = "sdhc_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SDHC1_OFFSET,
- .disable = _clk_disable,
- },
+/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+ * It provides the clock source whose rate is same MPLL * 2 / 3
+ */
+static struct clk mpll_main2_clk = {
+ .id = 1,
+ .parent = &mpll_clk,
+ .get_rate = get_rate_mpll_main,
};
-static struct clk sdhc2_clk[] = {
- {
- .name = "sdhc_clk",
- .id = 1,
- .parent = &per_clk[1],
- .secondary = &sdhc2_clk[1],
- }, {
- .name = "sdhc_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SDHC2_OFFSET,
- .disable = _clk_disable,
- },
+static struct clk ahb_clk = {
+ .parent = &mpll_main2_clk,
+ .get_rate = get_rate_ahb,
};
-static struct clk sdhc3_clk[] = {
- {
- .name = "sdhc_clk",
- .id = 2,
- .parent = &per_clk[1],
- .secondary = &sdhc3_clk[1],
- }, {
- .name = "sdhc_ipg_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SDHC3_OFFSET,
- .disable = _clk_disable,
- },
+static struct clk ipg_clk = {
+ .parent = &ahb_clk,
+ .get_rate = get_rate_ipg,
};
-static struct clk cspi1_clk[] = {
- {
- .name = "cspi_clk",
- .id = 0,
- .parent = &per_clk[1],
- .secondary = &cspi1_clk[1],
- }, {
- .name = "cspi_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_CSPI1_OFFSET,
- .disable = _clk_disable,
- },
+static struct clk cpu_clk = {
+ .parent = &mpll_main2_clk,
+ .set_parent = clk_cpu_set_parent,
+ .round_rate = round_rate_cpu,
+ .get_rate = get_rate_cpu,
+ .set_rate = set_rate_cpu,
};
-static struct clk cspi2_clk[] = {
- {
- .name = "cspi_clk",
- .id = 1,
- .parent = &per_clk[1],
- .secondary = &cspi2_clk[1],
- }, {
- .name = "cspi_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_CSPI2_OFFSET,
- .disable = _clk_disable,
- },
+static struct clk spll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = get_rate_spll,
+ .enable = clk_spll_enable,
+ .disable = clk_spll_disable,
};
-static struct clk cspi3_clk[] = {
- {
- .name = "cspi_clk",
- .id = 2,
- .parent = &per_clk[1],
- .secondary = &cspi3_clk[1],
- }, {
- .name = "cspi_ipg_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_CSPI3_OFFSET,
- .disable = _clk_disable,
- },
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+ .get_rate = get_rate_low_reference,
};
-static struct clk lcdc_clk[] = {
- {
- .name = "lcdc_clk",
- .parent = &per_clk[2],
- .secondary = &lcdc_clk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- }, {
- .name = "lcdc_ipg_clk",
- .parent = &ipg_clk,
- .secondary = &lcdc_clk[2],
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_LCDC_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "lcdc_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET,
- .disable = _clk_disable,
- },
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+ .parent = &ckil_clk,
+ .get_rate = get_rate_fpm,
};
-static struct clk csi_clk[] = {
- {
- .name = "csi_perclk",
- .parent = &per_clk[3],
- .secondary = &csi_clk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- }, {
- .name = "csi_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET,
- .disable = _clk_disable,
- },
-};
+#define PCCR0 CCM_PCCR0
+#define PCCR1 CCM_PCCR1
-static struct clk usb_clk[] = {
- {
- .name = "usb_clk",
- .parent = &spll_clk,
- .get_rate = _clk_usb_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_USBOTG_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "usb_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET,
- .disable = _clk_disable,
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .enable = clk_pccr_enable, \
+ .disable = clk_pccr_disable, \
+ .secondary = s, \
+ .parent = p, \
}
-};
-static struct clk ssi1_clk[] = {
- {
- .name = "ssi_clk",
- .id = 0,
- .parent = &mpll_main_clk[1],
- .secondary = &ssi1_clk[1],
- .get_rate = _clk_ssi1_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "ssi_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET,
- .disable = _clk_disable,
- },
-};
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = get_rate_##getsetround, \
+ .set_rate = set_rate_##getsetround, \
+ .round_rate = round_rate_##getsetround, \
+ .enable = clk_pccr_enable, \
+ .disable = clk_pccr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
-static struct clk ssi2_clk[] = {
- {
- .name = "ssi_clk",
- .id = 1,
- .parent = &mpll_main_clk[1],
- .secondary = &ssi2_clk[1],
- .get_rate = _clk_ssi2_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "ssi_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET,
- .disable = _clk_disable,
+/* Forward declaration to keep the following list in order */
+static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
+ dma_clk1, lcdc_clk2, vpu_clk1;
+
+/* All clocks we can gate through PCCRx in the order of PCCRx bits */
+DEFINE_CLOCK(ssi2_clk1, 1, PCCR0, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ssi1_clk1, 0, PCCR0, 1, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(slcdc_clk, 0, PCCR0, 2, NULL, &slcdc_clk1, &ahb_clk);
+DEFINE_CLOCK(sdhc3_clk1, 0, PCCR0, 3, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc2_clk1, 0, PCCR0, 4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc1_clk1, 0, PCCR0, 5, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(scc_clk, 0, PCCR0, 6, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sahara2_clk, 0, PCCR0, 7, NULL, &sahara2_clk1, &ahb_clk);
+DEFINE_CLOCK(rtic_clk, 0, PCCR0, 8, NULL, &rtic_clk1, &ahb_clk);
+DEFINE_CLOCK(rtc_clk, 0, PCCR0, 9, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk1, 0, PCCR0, 11, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(owire_clk, 0, PCCR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mstick_clk1, 0, PCCR0, 13, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(lcdc_clk1, 0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
+DEFINE_CLOCK(kpp_clk, 0, PCCR0, 15, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(iim_clk, 0, PCCR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c2_clk, 1, PCCR0, 17, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c1_clk, 0, PCCR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt6_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt5_clk1, 0, PCCR0, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt4_clk1, 0, PCCR0, 21, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt3_clk1, 0, PCCR0, 22, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt2_clk1, 0, PCCR0, 23, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt1_clk1, 0, PCCR0, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpio_clk, 0, PCCR0, 25, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(fec_clk, 0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
+DEFINE_CLOCK(emma_clk, 0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
+DEFINE_CLOCK(dma_clk, 0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi13_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk1, 0, PCCR0, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi1_clk1, 0, PCCR0, 31, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(mstick_clk, 0, PCCR1, 2, NULL, &mstick_clk1, &ipg_clk);
+DEFINE_CLOCK(nfc_clk, 0, PCCR1, 3, get_rate_nfc, NULL, &cpu_clk);
+DEFINE_CLOCK(ssi2_clk, 1, PCCR1, 4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(ssi1_clk, 0, PCCR1, 5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(vpu_clk, 0, PCCR1, 6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
+DEFINE_CLOCK1(per4_clk, 3, PCCR1, 7, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per3_clk, 2, PCCR1, 8, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per2_clk, 1, PCCR1, 9, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per1_clk, 0, PCCR1, 10, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK(usb_clk1, 0, PCCR1, 11, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(slcdc_clk1, 0, PCCR1, 12, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk1, 0, PCCR1, 14, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(lcdc_clk2, 0, PCCR1, 15, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(vpu_clk1, 0, PCCR1, 16, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(fec_clk1, 0, PCCR1, 17, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emma_clk1, 0, PCCR1, 18, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk, 0, PCCR1, 19, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(ata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
+DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart5_clk1, 0, PCCR1, 27, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart4_clk1, 0, PCCR1, 28, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart3_clk1, 0, PCCR1, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk);
+
+/* Clocks we cannot directly gate, but drivers need their rates */
+DEFINE_CLOCK(cspi1_clk, 0, 0, 0, NULL, &cspi1_clk1, &per2_clk);
+DEFINE_CLOCK(cspi2_clk, 1, 0, 0, NULL, &cspi2_clk1, &per2_clk);
+DEFINE_CLOCK(cspi3_clk, 2, 0, 0, NULL, &cspi13_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc1_clk, 0, 0, 0, NULL, &sdhc1_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc2_clk, 1, 0, 0, NULL, &sdhc2_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc3_clk, 2, 0, 0, NULL, &sdhc3_clk1, &per2_clk);
+DEFINE_CLOCK(pwm_clk, 0, 0, 0, NULL, &pwm_clk1, &per1_clk);
+DEFINE_CLOCK(gpt1_clk, 0, 0, 0, NULL, &gpt1_clk1, &per1_clk);
+DEFINE_CLOCK(gpt2_clk, 1, 0, 0, NULL, &gpt2_clk1, &per1_clk);
+DEFINE_CLOCK(gpt3_clk, 2, 0, 0, NULL, &gpt3_clk1, &per1_clk);
+DEFINE_CLOCK(gpt4_clk, 3, 0, 0, NULL, &gpt4_clk1, &per1_clk);
+DEFINE_CLOCK(gpt5_clk, 4, 0, 0, NULL, &gpt5_clk1, &per1_clk);
+DEFINE_CLOCK(gpt6_clk, 5, 0, 0, NULL, &gpt6_clk1, &per1_clk);
+DEFINE_CLOCK(uart1_clk, 0, 0, 0, NULL, &uart1_clk1, &per1_clk);
+DEFINE_CLOCK(uart2_clk, 1, 0, 0, NULL, &uart2_clk1, &per1_clk);
+DEFINE_CLOCK(uart3_clk, 2, 0, 0, NULL, &uart3_clk1, &per1_clk);
+DEFINE_CLOCK(uart4_clk, 3, 0, 0, NULL, &uart4_clk1, &per1_clk);
+DEFINE_CLOCK(uart5_clk, 4, 0, 0, NULL, &uart5_clk1, &per1_clk);
+DEFINE_CLOCK(uart6_clk, 5, 0, 0, NULL, &uart6_clk1, &per1_clk);
+DEFINE_CLOCK1(lcdc_clk, 0, 0, 0, parent, &lcdc_clk1, &per3_clk);
+DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
},
-};
-
-static struct clk nfc_clk = {
- .name = "nfc_clk",
- .parent = &cpu_clk,
- .get_rate = _clk_nfc_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk vpu_clk = {
- .name = "vpu_clk",
- .parent = &mpll_main_clk[1],
- .get_rate = _clk_vpu_recalc,
- .enable = _clk_vpu_enable,
- .disable = _clk_vpu_disable,
-};
-
-static struct clk dma_clk = {
- .name = "dma_clk",
- .parent = &ahb_clk,
- .enable = _clk_dma_enable,
- .disable = _clk_dma_disable,
-};
-
-static struct clk rtic_clk = {
- .name = "rtic_clk",
- .parent = &ahb_clk,
- .enable = _clk_rtic_enable,
- .disable = _clk_rtic_disable,
-};
-static struct clk brom_clk = {
- .name = "brom_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk emma_clk = {
- .name = "emma_clk",
- .parent = &ahb_clk,
- .enable = _clk_emma_enable,
- .disable = _clk_emma_disable,
-};
-
-static struct clk slcdc_clk = {
- .name = "slcdc_clk",
- .parent = &ahb_clk,
- .enable = _clk_slcdc_enable,
- .disable = _clk_slcdc_disable,
-};
-
-static struct clk fec_clk = {
- .name = "fec_clk",
- .parent = &ahb_clk,
- .enable = _clk_fec_enable,
- .disable = _clk_fec_disable,
-};
-
-static struct clk emi_clk = {
- .name = "emi_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk sahara2_clk = {
- .name = "sahara_clk",
- .parent = &ahb_clk,
- .enable = _clk_sahara2_enable,
- .disable = _clk_sahara2_disable,
-};
-
-static struct clk ata_clk = {
- .name = "ata_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk mstick1_clk = {
- .name = "mstick1_clk",
- .parent = &ipg_clk,
- .enable = _clk_mstick1_enable,
- .disable = _clk_mstick1_disable,
-};
-
-static struct clk wdog_clk = {
- .name = "wdog_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_WDT_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR0_GPIO_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk i2c_clk[] = {
- {
- .name = "i2c_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_I2C1_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "i2c_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_I2C2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk iim_clk = {
- .name = "iim_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_IIM_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
- .name = "kpp_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_KPP_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
- .name = "owire_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_OWIRE_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
- .name = "rtc_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_RTC_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk scc_clk = {
- .name = "scc_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SCC_OFFSET,
- .disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 8)
- div = 8;
-
- return parent_rate / div;
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK;
- reg |= div << CCM_PCDR0_CLKODIV_OFFSET;
- __raw_writel(reg, CCM_PCDR0);
-
- return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >>
- CCM_PCDR0_CLKODIV_OFFSET;
- div++;
-
- return parent_rate / div;
-}
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
- if (parent == &ckil_clk)
- reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ckih_clk)
- reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == mpll_clk.parent)
- reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == spll_clk.parent)
- reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &mpll_clk)
- reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &spll_clk)
- reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &cpu_clk)
- reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ahb_clk)
- reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ipg_clk)
- reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[0])
- reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[1])
- reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[2])
- reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[3])
- reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ssi1_clk[0])
- reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ssi2_clk[0])
- reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &nfc_clk)
- reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &mstick1_clk)
- reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &vpu_clk)
- reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &usb_clk[0])
- reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
- else
- return -EINVAL;
-
- __raw_writel(reg, CCM_CCSR);
-
- return 0;
-}
-
-static int _clk_clko_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN;
- __raw_writel(reg, CCM_PCDR0);
-
- return 0;
-}
-
-static void _clk_clko_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN;
- __raw_writel(reg, CCM_PCDR0);
-}
-
-static struct clk clko_clk = {
- .name = "clko_clk",
- .get_rate = _clk_clko_recalc,
- .set_rate = _clk_clko_set_rate,
- .round_rate = _clk_clko_round_rate,
- .set_parent = _clk_clko_set_parent,
- .enable = _clk_clko_enable,
- .disable = _clk_clko_disable,
-};
-
-static struct clk *mxc_clks[] = {
- &ckih_clk,
- &ckil_clk,
- &mpll_clk,
- &mpll_main_clk[0],
- &mpll_main_clk[1],
- &spll_clk,
- &cpu_clk,
- &ahb_clk,
- &ipg_clk,
- &per_clk[0],
- &per_clk[1],
- &per_clk[2],
- &per_clk[3],
- &clko_clk,
- &uart1_clk[0],
- &uart1_clk[1],
- &uart2_clk[0],
- &uart2_clk[1],
- &uart3_clk[0],
- &uart3_clk[1],
- &uart4_clk[0],
- &uart4_clk[1],
- &uart5_clk[0],
- &uart5_clk[1],
- &uart6_clk[0],
- &uart6_clk[1],
- &gpt1_clk[0],
- &gpt1_clk[1],
- &gpt2_clk[0],
- &gpt2_clk[1],
- &gpt3_clk[0],
- &gpt3_clk[1],
- &gpt4_clk[0],
- &gpt4_clk[1],
- &gpt5_clk[0],
- &gpt5_clk[1],
- &gpt6_clk[0],
- &gpt6_clk[1],
- &pwm_clk[0],
- &pwm_clk[1],
- &sdhc1_clk[0],
- &sdhc1_clk[1],
- &sdhc2_clk[0],
- &sdhc2_clk[1],
- &sdhc3_clk[0],
- &sdhc3_clk[1],
- &cspi1_clk[0],
- &cspi1_clk[1],
- &cspi2_clk[0],
- &cspi2_clk[1],
- &cspi3_clk[0],
- &cspi3_clk[1],
- &lcdc_clk[0],
- &lcdc_clk[1],
- &lcdc_clk[2],
- &csi_clk[0],
- &csi_clk[1],
- &usb_clk[0],
- &usb_clk[1],
- &ssi1_clk[0],
- &ssi1_clk[1],
- &ssi2_clk[0],
- &ssi2_clk[1],
- &nfc_clk,
- &vpu_clk,
- &dma_clk,
- &rtic_clk,
- &brom_clk,
- &emma_clk,
- &slcdc_clk,
- &fec_clk,
- &emi_clk,
- &sahara2_clk,
- &ata_clk,
- &mstick1_clk,
- &wdog_clk,
- &gpio_clk,
- &i2c_clk[0],
- &i2c_clk[1],
- &iim_clk,
- &kpp_clk,
- &owire_clk,
- &rtc_clk,
- &scc_clk,
-};
-
-void __init change_external_low_reference(unsigned long new_ref)
-{
- external_low_reference = new_ref;
-}
-
-unsigned long __init clk_early_get_timer_rate(void)
-{
- return clk_get_rate(&per_clk[0]);
-}
-
-static void __init probe_mxc_clocks(void)
-{
- int i;
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
+ _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
+ _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
+ _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
+ _REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
+ _REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
+ _REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
+ _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
+ _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+ _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+ _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
+ _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
+ _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
+ _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+ _REGISTER_CLOCK(NULL, "csi", csi_clk)
+ _REGISTER_CLOCK(NULL, "usb", usb_clk)
+ _REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
+ _REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK(NULL, "vpu", vpu_clk)
+ _REGISTER_CLOCK(NULL, "dma", dma_clk)
+ _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+ _REGISTER_CLOCK(NULL, "brom", brom_clk)
+ _REGISTER_CLOCK(NULL, "emma", emma_clk)
+ _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK(NULL, "emi", emi_clk)
+ _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
+ _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK(NULL, "mstick", mstick_clk)
+ _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
+ _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+ _REGISTER_CLOCK(NULL, "scc", scc_clk)
+};
+
+/* Adjust the clock path for TO2 and later */
+static void __init to2_adjust_clocks(void)
+{
+ unsigned long cscr = __raw_readl(CCM_CSCR);
if (mx27_revision() >= CHIP_REV_2_0) {
- if (CSCR() & 0x8000)
- cpu_clk.parent = &mpll_main_clk[0];
+ if (cscr & CCM_CSCR_ARM_SRC)
+ cpu_clk.parent = &mpll_main1_clk;
- if (!(CSCR() & 0x00800000))
- ssi2_clk[0].parent = &spll_clk;
+ if (!(cscr & CCM_CSCR_SSI2))
+ ssi1_clk.parent = &spll_clk;
- if (!(CSCR() & 0x00400000))
- ssi1_clk[0].parent = &spll_clk;
+ if (!(cscr & CCM_CSCR_SSI1))
+ ssi1_clk.parent = &spll_clk;
- if (!(CSCR() & 0x00200000))
+ if (!(cscr & CCM_CSCR_VPU))
vpu_clk.parent = &spll_clk;
} else {
cpu_clk.parent = &mpll_clk;
cpu_clk.set_rate = NULL;
ahb_clk.parent = &mpll_clk;
- for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++)
- per_clk[i].parent = &mpll_clk;
+ per1_clk.parent = &mpll_clk;
+ per2_clk.parent = &mpll_clk;
+ per3_clk.parent = &mpll_clk;
+ per4_clk.parent = &mpll_clk;
- ssi1_clk[0].parent = &mpll_clk;
- ssi2_clk[0].parent = &mpll_clk;
+ ssi1_clk.parent = &mpll_clk;
+ ssi2_clk.parent = &mpll_clk;
vpu_clk.parent = &mpll_clk;
}
* must be called very early to get information about the
* available clock rate when the timer framework starts
*/
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx27_clocks_init(unsigned long fref)
{
- u32 cscr;
- struct clk **clkp;
+ u32 cscr = __raw_readl(CCM_CSCR);
+ int i;
external_high_reference = fref;
- /* detect clock reference for both system PLL */
- cscr = CSCR();
+ /* detect clock reference for both system PLLs */
if (cscr & CCM_CSCR_MCU)
mpll_clk.parent = &ckih_clk;
else
- mpll_clk.parent = &ckil_clk;
+ mpll_clk.parent = &fpm_clk;
if (cscr & CCM_CSCR_SP)
spll_clk.parent = &ckih_clk;
else
- spll_clk.parent = &ckil_clk;
+ spll_clk.parent = &fpm_clk;
- probe_mxc_clocks();
+ to2_adjust_clocks();
- per_clk[0].enable(&per_clk[0]);
- gpt1_clk[1].enable(&gpt1_clk[1]);
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
- for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
- clk_register(*clkp);
+ /* Turn off all clocks we do not need */
+ __raw_writel(0, CCM_PCCR0);
+ __raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
- /* Turn off all possible clocks */
- __raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0);
- __raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK,
- CCM_PCCR1);
spll_clk.disable(&spll_clk);
- /* This will propagate to all children and init all the clock rates */
-
- clk_enable(&emi_clk);
+ /* enable basic clocks */
+ clk_enable(&per1_clk);
clk_enable(&gpio_clk);
+ clk_enable(&emi_clk);
clk_enable(&iim_clk);
- clk_enable(&gpt1_clk[0]);
+
#ifdef CONFIG_DEBUG_LL_CONSOLE
- clk_enable(&uart1_clk[0]);
+ clk_enable(&uart1_clk);
#endif
+
+ mxc_timer_init(&gpt1_clk);
+
return 0;
}
+
#include <mach/hardware.h>
-#include "crm_regs.h"
-
static int cpu_silicon_rev = -1;
static int cpu_partnumber;
+#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
+
static void query_silicon_parameter(void)
{
u32 val;
#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-#define CCM_CSCR_USB_OFFSET 28
-#define CCM_CSCR_USB_MASK (0x7 << 28)
+#define CCM_CSCR_PRESC_OFFSET 29
+#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET 26
+#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
#define CCM_CSCR_SD_OFFSET 24
-#define CCM_CSCR_SD_MASK (0x3 << 24)
-#define CCM_CSCR_SSI2 (1 << 23)
-#define CCM_CSCR_SSI2_OFFSET 23
-#define CCM_CSCR_SSI1 (1 << 22)
-#define CCM_CSCR_SSI1_OFFSET 22
-#define CCM_CSCR_VPU (1 << 21)
-#define CCM_CSCR_VPU_OFFSET 21
-#define CCM_CSCR_MSHC (1 << 20)
-#define CCM_CSCR_SPLLRES (1 << 19)
-#define CCM_CSCR_MPLLRES (1 << 18)
+#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES (1 << 22)
+#define CCM_CSCR_MPLLRES (1 << 21)
+#define CCM_CSCR_SSI2_OFFSET 20
+#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET 19
+#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET 18
+#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
#define CCM_CSCR_SP (1 << 17)
#define CCM_CSCR_MCU (1 << 16)
-/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_ARM_SRC (1 << 15)
-#define CCM_CSCR_ARM_OFFSET 12
-#define CCM_CSCR_ARM_MASK (0x3 << 12)
-/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_PRESC_OFFSET 13
-#define CCM_CSCR_PRESC_MASK (0x7 << 13)
-#define CCM_CSCR_BCLK_OFFSET 9
-#define CCM_CSCR_BCLK_MASK (0xf << 9)
-#define CCM_CSCR_IPDIV_OFFSET 8
-#define CCM_CSCR_IPDIV (1 << 8)
-/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_AHB_OFFSET 8
-#define CCM_CSCR_AHB_MASK (0x3 << 8)
-/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_BCLK_OFFSET 10
+#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET 9
+#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
+
#define CCM_CSCR_OSC26MDIV (1 << 4)
#define CCM_CSCR_OSC26M (1 << 3)
#define CCM_CSCR_FPM (1 << 2)
#define CCM_CSCR_SPEN (1 << 1)
#define CCM_CSCR_MPEN 1
+
+
#define CCM_MPCTL0_CPLM (1 << 31)
#define CCM_MPCTL0_PD_OFFSET 26
#define CCM_MPCTL0_PD_MASK (0xf << 26)
#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
-#define CCM_PCDR0_CLKO_EN 25
-#define CCM_PCDR0_CLKODIV_OFFSET 22
-#define CCM_PCDR0_CLKODIV_MASK (0x7 << 22)
#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
-/*The difinition for i.MX27 TO2*/
-#define CCM_PCDR0_VPUDIV2_OFFSET 10
-#define CCM_PCDR0_VPUDIV2_MASK (0x3f << 10)
-#define CCM_PCDR0_NFCDIV2_OFFSET 6
-#define CCM_PCDR0_NFCDIV2_MASK (0xf << 6)
-#define CCM_PCDR0_MSHCDIV2_MASK 0x3f
-/*The difinition for i.MX27 TO2*/
#define CCM_PCDR0_NFCDIV_OFFSET 12
#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
-#define CCM_PCDR0_VPUDIV_OFFSET 8
-#define CCM_PCDR0_VPUDIV_MASK (0xf << 8)
-#define CCM_PCDR0_MSHCDIV_OFFSET 0
-#define CCM_PCDR0_MSHCDIV_MASK 0x1f
-
+#define CCM_PCDR0_48MDIV_OFFSET 5
+#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET 0
+#define CCM_PCDR0_FIRIDIV_MASK 0x1f
#define CCM_PCDR1_PERDIV4_OFFSET 24
#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
#define CCM_PCDR1_PERDIV3_OFFSET 16
#define CCM_PCDR1_PERDIV1_OFFSET 0
#define CCM_PCDR1_PERDIV1_MASK 0x3f
-#define CCM_PCCR0_CSPI1_OFFSET 31
-#define CCM_PCCR0_CSPI1_MASK (1 << 31)
-#define CCM_PCCR0_CSPI2_OFFSET 30
-#define CCM_PCCR0_CSPI2_MASK (1 << 30)
-#define CCM_PCCR0_CSPI3_OFFSET 29
-#define CCM_PCCR0_CSPI3_MASK (1 << 29)
-#define CCM_PCCR0_DMA_OFFSET 28
-#define CCM_PCCR0_DMA_MASK (1 << 28)
-#define CCM_PCCR0_EMMA_OFFSET 27
-#define CCM_PCCR0_EMMA_MASK (1 << 27)
-#define CCM_PCCR0_FEC_OFFSET 26
-#define CCM_PCCR0_FEC_MASK (1 << 26)
-#define CCM_PCCR0_GPIO_OFFSET 25
-#define CCM_PCCR0_GPIO_MASK (1 << 25)
-#define CCM_PCCR0_GPT1_OFFSET 24
-#define CCM_PCCR0_GPT1_MASK (1 << 24)
-#define CCM_PCCR0_GPT2_OFFSET 23
-#define CCM_PCCR0_GPT2_MASK (1 << 23)
-#define CCM_PCCR0_GPT3_OFFSET 22
-#define CCM_PCCR0_GPT3_MASK (1 << 22)
-#define CCM_PCCR0_GPT4_OFFSET 21
-#define CCM_PCCR0_GPT4_MASK (1 << 21)
-#define CCM_PCCR0_GPT5_OFFSET 20
-#define CCM_PCCR0_GPT5_MASK (1 << 20)
-#define CCM_PCCR0_GPT6_OFFSET 19
-#define CCM_PCCR0_GPT6_MASK (1 << 19)
-#define CCM_PCCR0_I2C1_OFFSET 18
-#define CCM_PCCR0_I2C1_MASK (1 << 18)
-#define CCM_PCCR0_I2C2_OFFSET 17
-#define CCM_PCCR0_I2C2_MASK (1 << 17)
-#define CCM_PCCR0_IIM_OFFSET 16
-#define CCM_PCCR0_IIM_MASK (1 << 16)
-#define CCM_PCCR0_KPP_OFFSET 15
-#define CCM_PCCR0_KPP_MASK (1 << 15)
-#define CCM_PCCR0_LCDC_OFFSET 14
-#define CCM_PCCR0_LCDC_MASK (1 << 14)
-#define CCM_PCCR0_MSHC_OFFSET 13
-#define CCM_PCCR0_MSHC_MASK (1 << 13)
-#define CCM_PCCR0_OWIRE_OFFSET 12
-#define CCM_PCCR0_OWIRE_MASK (1 << 12)
-#define CCM_PCCR0_PWM_OFFSET 11
-#define CCM_PCCR0_PWM_MASK (1 << 11)
-#define CCM_PCCR0_RTC_OFFSET 9
-#define CCM_PCCR0_RTC_MASK (1 << 9)
-#define CCM_PCCR0_RTIC_OFFSET 8
-#define CCM_PCCR0_RTIC_MASK (1 << 8)
-#define CCM_PCCR0_SAHARA_OFFSET 7
-#define CCM_PCCR0_SAHARA_MASK (1 << 7)
-#define CCM_PCCR0_SCC_OFFSET 6
-#define CCM_PCCR0_SCC_MASK (1 << 6)
-#define CCM_PCCR0_SDHC1_OFFSET 5
-#define CCM_PCCR0_SDHC1_MASK (1 << 5)
-#define CCM_PCCR0_SDHC2_OFFSET 4
-#define CCM_PCCR0_SDHC2_MASK (1 << 4)
-#define CCM_PCCR0_SDHC3_OFFSET 3
-#define CCM_PCCR0_SDHC3_MASK (1 << 3)
-#define CCM_PCCR0_SLCDC_OFFSET 2
-#define CCM_PCCR0_SLCDC_MASK (1 << 2)
-#define CCM_PCCR0_SSI1_IPG_OFFSET 1
-#define CCM_PCCR0_SSI1_IPG_MASK (1 << 1)
-#define CCM_PCCR0_SSI2_IPG_OFFSET 0
-#define CCM_PCCR0_SSI2_IPG_MASK (1 << 0)
+#define CCM_PCCR_HCLK_CSI_OFFSET 31
+#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET 30
+#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET 28
+#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET 27
+#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET 26
+#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
+#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
+#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET 23
+#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET 22
+#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET 21
+#define CCM_PCCR_SLCDC_REG CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET 20
+#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET 19
+#define CCM_PCCR_NFC_REG CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET 18
+#define CCM_PCCR_LCDC_REG CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET 17
+#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET 16
+#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET 15
+#define CCM_PCCR_EMMA_REG CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET 14
+#define CCM_PCCR_USBOTG_REG CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET 13
+#define CCM_PCCR_DMA_REG CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET 12
+#define CCM_PCCR_I2C1_REG CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET 11
+#define CCM_PCCR_GPIO_REG CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET 10
+#define CCM_PCCR_SDHC2_REG CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET 9
+#define CCM_PCCR_SDHC1_REG CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET 8
+#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET 7
+#define CCM_PCCR_SSI2_REG CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET 6
+#define CCM_PCCR_SSI1_REG CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET 5
+#define CCM_PCCR_CSPI2_REG CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET 4
+#define CCM_PCCR_CSPI1_REG CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET 3
+#define CCM_PCCR_UART4_REG CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET 2
+#define CCM_PCCR_UART3_REG CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET 1
+#define CCM_PCCR_UART2_REG CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET 0
+#define CCM_PCCR_UART1_REG CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET 31
+#define CCM_PCCR_OWIRE_REG CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET 30
+#define CCM_PCCR_KPP_REG CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET 29
+#define CCM_PCCR_RTC_REG CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET 28
+#define CCM_PCCR_PWM_REG CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET 27
+#define CCM_PCCR_GPT3_REG CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET 26
+#define CCM_PCCR_GPT2_REG CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET 25
+#define CCM_PCCR_GPT1_REG CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET 24
+#define CCM_PCCR_WDT_REG CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET 23
+#define CCM_PCCR_CSPI3_REG CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
-#define CCM_PCCR1_UART1_OFFSET 31
-#define CCM_PCCR1_UART1_MASK (1 << 31)
-#define CCM_PCCR1_UART2_OFFSET 30
-#define CCM_PCCR1_UART2_MASK (1 << 30)
-#define CCM_PCCR1_UART3_OFFSET 29
-#define CCM_PCCR1_UART3_MASK (1 << 29)
-#define CCM_PCCR1_UART4_OFFSET 28
-#define CCM_PCCR1_UART4_MASK (1 << 28)
-#define CCM_PCCR1_UART5_OFFSET 27
-#define CCM_PCCR1_UART5_MASK (1 << 27)
-#define CCM_PCCR1_UART6_OFFSET 26
-#define CCM_PCCR1_UART6_MASK (1 << 26)
-#define CCM_PCCR1_USBOTG_OFFSET 25
-#define CCM_PCCR1_USBOTG_MASK (1 << 25)
-#define CCM_PCCR1_WDT_OFFSET 24
-#define CCM_PCCR1_WDT_MASK (1 << 24)
-#define CCM_PCCR1_HCLK_ATA_OFFSET 23
-#define CCM_PCCR1_HCLK_ATA_MASK (1 << 23)
-#define CCM_PCCR1_HCLK_BROM_OFFSET 22
-#define CCM_PCCR1_HCLK_BROM_MASK (1 << 22)
-#define CCM_PCCR1_HCLK_CSI_OFFSET 21
-#define CCM_PCCR1_HCLK_CSI_MASK (1 << 21)
-#define CCM_PCCR1_HCLK_DMA_OFFSET 20
-#define CCM_PCCR1_HCLK_DMA_MASK (1 << 20)
-#define CCM_PCCR1_HCLK_EMI_OFFSET 19
-#define CCM_PCCR1_HCLK_EMI_MASK (1 << 19)
-#define CCM_PCCR1_HCLK_EMMA_OFFSET 18
-#define CCM_PCCR1_HCLK_EMMA_MASK (1 << 18)
-#define CCM_PCCR1_HCLK_FEC_OFFSET 17
-#define CCM_PCCR1_HCLK_FEC_MASK (1 << 17)
-#define CCM_PCCR1_HCLK_VPU_OFFSET 16
-#define CCM_PCCR1_HCLK_VPU_MASK (1 << 16)
-#define CCM_PCCR1_HCLK_LCDC_OFFSET 15
-#define CCM_PCCR1_HCLK_LCDC_MASK (1 << 15)
-#define CCM_PCCR1_HCLK_RTIC_OFFSET 14
-#define CCM_PCCR1_HCLK_RTIC_MASK (1 << 14)
-#define CCM_PCCR1_HCLK_SAHARA_OFFSET 13
-#define CCM_PCCR1_HCLK_SAHARA_MASK (1 << 13)
-#define CCM_PCCR1_HCLK_SLCDC_OFFSET 12
-#define CCM_PCCR1_HCLK_SLCDC_MASK (1 << 12)
-#define CCM_PCCR1_HCLK_USBOTG_OFFSET 11
-#define CCM_PCCR1_HCLK_USBOTG_MASK (1 << 11)
-#define CCM_PCCR1_PERCLK1_OFFSET 10
-#define CCM_PCCR1_PERCLK1_MASK (1 << 10)
-#define CCM_PCCR1_PERCLK2_OFFSET 9
-#define CCM_PCCR1_PERCLK2_MASK (1 << 9)
-#define CCM_PCCR1_PERCLK3_OFFSET 8
-#define CCM_PCCR1_PERCLK3_MASK (1 << 8)
-#define CCM_PCCR1_PERCLK4_OFFSET 7
-#define CCM_PCCR1_PERCLK4_MASK (1 << 7)
-#define CCM_PCCR1_VPU_BAUD_OFFSET 6
-#define CCM_PCCR1_VPU_BAUD_MASK (1 << 6)
-#define CCM_PCCR1_SSI1_BAUD_OFFSET 5
-#define CCM_PCCR1_SSI1_BAUD_MASK (1 << 5)
-#define CCM_PCCR1_SSI2_BAUD_OFFSET 4
-#define CCM_PCCR1_SSI2_BAUD_MASK (1 << 4)
-#define CCM_PCCR1_NFC_BAUD_OFFSET 3
-#define CCM_PCCR1_NFC_BAUD_MASK (1 << 3)
-#define CCM_PCCR1_MSHC_BAUD_OFFSET 2
-#define CCM_PCCR1_MSHC_BAUD_MASK (1 << 2)
#define CCM_CCSR_32KSR (1 << 15)
+
#define CCM_CCSR_CLKMODE1 (1 << 9)
#define CCM_CCSR_CLKMODE0 (1 << 8)
+
#define CCM_CCSR_CLKOSEL_OFFSET 0
#define CCM_CCSR_CLKOSEL_MASK 0x1f
#include <mach/irqs.h>
#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
/*
* Resource definition for the MXC IrDA
.resource = mxc_nand_resources,
};
+#ifdef CONFIG_FB_IMX
+/*
+ * lcdc:
+ * - i.MX1: the basic controller
+ * - i.MX21: to be checked
+ * - i.MX27: like i.MX1, with slightly variations
+ */
+static struct resource mxc_fb[] = {
+ {
+ .start = LCDC_BASE_ADDR,
+ .end = LCDC_BASE_ADDR + 0xFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MXC_INT_LCDC,
+ .end = MXC_INT_LCDC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* mxc lcd driver */
+struct platform_device mxc_fb_device = {
+ .name = "imx-fb",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_fb),
+ .resource = mxc_fb,
+ .dev = {
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+};
+#endif
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_fec_resources[] = {
+ {
+ .start = FEC_BASE_ADDR,
+ .end = FEC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = MXC_INT_FEC,
+ .end = MXC_INT_FEC,
+ .flags = IORESOURCE_IRQ
+ },
+};
+
+struct platform_device mxc_fec_device = {
+ .name = "fec",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_fec_resources),
+ .resource = mxc_fec_resources,
+};
+#endif
+
+static struct resource mxc_i2c_1_resources[] = {
+ [0] = {
+ .start = I2C_BASE_ADDR,
+ .end = I2C_BASE_ADDR + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_I2C,
+ .end = MXC_INT_I2C,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device mxc_i2c_device0 = {
+ .name = "imx-i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+ .resource = mxc_i2c_1_resources
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_i2c_2_resources[] = {
+ [0] = {
+ .start = I2C2_BASE_ADDR,
+ .end = I2C2_BASE_ADDR + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_I2C2,
+ .end = MXC_INT_I2C2,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device mxc_i2c_device1 = {
+ .name = "imx-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+ .resource = mxc_i2c_2_resources
+};
+#endif
+
+static struct resource mxc_pwm_resources[] = {
+ [0] = {
+ .start = PWM_BASE_ADDR,
+ .end = PWM_BASE_ADDR + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_PWM,
+ .end = MXC_INT_PWM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device = {
+ .name = "mxc_pwm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources),
+ .resource = mxc_pwm_resources
+};
+
+/*
+ * Resource definition for the MXC SDHC
+ */
+static struct resource mxc_sdhc1_resources[] = {
+ [0] = {
+ .start = SDHC1_BASE_ADDR,
+ .end = SDHC1_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MXC_INT_SDHC1,
+ .end = MXC_INT_SDHC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = DMA_REQ_SDHC1,
+ .end = DMA_REQ_SDHC1,
+ .flags = IORESOURCE_DMA
+ },
+};
+
+static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
+
+struct platform_device mxc_sdhc_device0 = {
+ .name = "mxc-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mxc_sdhc1_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+ .resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_sdhc2_resources[] = {
+ [0] = {
+ .start = SDHC2_BASE_ADDR,
+ .end = SDHC2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MXC_INT_SDHC2,
+ .end = MXC_INT_SDHC2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = DMA_REQ_SDHC2,
+ .end = DMA_REQ_SDHC2,
+ .flags = IORESOURCE_DMA
+ },
+};
+
+static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
+
+struct platform_device mxc_sdhc_device1 = {
+ .name = "mxc-mmc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mxc_sdhc2_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(mxc_sdhc2_resources),
+ .resource = mxc_sdhc2_resources,
+};
+
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
[0] = {
.chip.label = "gpio-0",
.irq = MXC_INT_GPIO,
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR),
.virtual_irq_start = MXC_GPIO_IRQ_START,
},
[1] = {
.chip.label = "gpio-1",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
},
[2] = {
.chip.label = "gpio-2",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
},
[3] = {
.chip.label = "gpio-3",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
},
[4] = {
.chip.label = "gpio-4",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
},
[5] = {
.chip.label = "gpio-5",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
}
};
-
extern struct platform_device mxc_gpt1;
extern struct platform_device mxc_gpt2;
extern struct platform_device mxc_gpt3;
extern struct platform_device mxc_uart_device5;
extern struct platform_device mxc_w1_master_device;
extern struct platform_device mxc_nand_device;
+extern struct platform_device mxc_fb_device;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_pwm_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
#include <linux/mm.h>
#include <linux/init.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
#include <mach/board-mx27ads.h>
#include "devices.h"
{
mxc_gpio_release_multiple_pins(mxc_uart3_pins,
ARRAY_SIZE(mxc_uart3_pins));
+ return 0;
}
static int mxc_uart4_pins[] = {
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
+ &mxc_fec_device,
};
static int mxc_fec_pins[] = {
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_CLR,
+ PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN
ARRAY_SIZE(mxc_fec_pins), "FEC");
}
-static void gpio_fec_inactive(void)
-{
- mxc_gpio_release_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins));
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
.init = uart_mxc_port0_init,
if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
fref = 27000000;
- mxc_clocks_init(fref);
- mxc_timer_init("gpt_clk.0");
+ mx27_clocks_init(fref);
}
-struct sys_timer mx27ads_timer = {
+static struct sys_timer mx27ads_timer = {
.init = mx27ads_timer_init,
};
},
};
-void __init mx27ads_map_io(void)
+static void __init mx27ads_map_io(void)
{
mxc_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
#include <asm/mach/time.h>
#include <mach/imx-uart.h>
#include <mach/board-pcm038.h>
return 0;
}
-static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
+static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
PE9_PF_UART3_RXD,
PE10_PF_UART3_CTS,
- PE9_PF_UART3_RXD };
+ PE11_PF_UART3_RTS };
static int uart_mxc_port2_init(struct platform_device *pdev)
{
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_CLR,
+ PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN
ARRAY_SIZE(mxc_fec_pins), "FEC");
}
-static void gpio_fec_inactive(void)
-{
- mxc_gpio_release_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins));
-}
-
static struct mxc_nand_platform_data pcm038_nand_board_info = {
.width = 1,
.hw_ecc = 1,
static struct platform_device *platform_devices[] __initdata = {
&pcm038_nor_mtd_device,
&mxc_w1_master_device,
+ &mxc_fec_device,
&pcm038_sram_mtd_device,
};
__raw_writel(0x22220a00, CSCR_A(1));
}
+#ifdef CONFIG_I2C_IMX
+static int mxc_i2c1_pins[] = {
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL
+};
+
+static int pcm038_i2c_1_init(struct device *dev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
+ "I2C1");
+}
+
+static void pcm038_i2c_1_exit(struct device *dev)
+{
+ mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
+}
+
+static struct imxi2c_platform_data pcm038_i2c_1_data = {
+ .bitrate = 100000,
+ .init = pcm038_i2c_1_init,
+ .exit = pcm038_i2c_1_exit,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm038_i2c_devices[] = {
+ [0] = {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ },
+ [1] = {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563"
+ },
+ [2] = {
+ I2C_BOARD_INFO("lm75", 0x4a),
+ .type = "lm75"
+ }
+};
+#endif
+
static void __init pcm038_init(void)
{
gpio_fec_active();
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */
+ mxc_gpio_mode(PE16_AF_OWIRE);
mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+#ifdef CONFIG_I2C_IMX
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, pcm038_i2c_devices,
+ ARRAY_SIZE(pcm038_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+#endif
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
static void __init pcm038_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("gpt_clk.0");
+ mx27_clocks_init(26000000);
}
-struct sys_timer pcm038_timer = {
+static struct sys_timer pcm038_timer = {
.init = pcm038_timer_init,
};
*/
#include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_PORTC + 28);
+}
+
+static int pcm970_sdhc2_pins[] = {
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
+{
+ int ret;
+
+ ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
+ ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
+ if(ret)
+ return ret;
+
+ ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+ "imx-mmc-detect", data);
+ if (ret)
+ goto out_release_gpio;
+
+ set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+
+ ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
+ if (ret)
+ goto out_release_gpio;
+
+ mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
+ gpio_direction_input(GPIO_PORTC + 28);
+
+ return 0;
+
+out_release_gpio:
+ mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+ ARRAY_SIZE(pcm970_sdhc2_pins));
+ return ret;
+}
+
+static void pcm970_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOC(29), data);
+ gpio_free(GPIO_PORTC + 28);
+ mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+ ARRAY_SIZE(pcm970_sdhc2_pins));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .get_ro = pcm970_sdhc2_get_ro,
+ .init = pcm970_sdhc2_init,
+ .exit = pcm970_sdhc2_exit,
+};
+
+static int mxc_fb_pins[] = {
+ PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2,
+ PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6,
+ PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10,
+ PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14,
+ PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV,
+ PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC,
+ PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD
+};
+
+static int pcm038_fb_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
+ ARRAY_SIZE(mxc_fb_pins), "FB");
+}
+
+static int pcm038_fb_exit(struct platform_device *pdev)
+{
+ mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
+
+ return 0;
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DH06
+ */
+static struct imx_fb_platform_data pcm038_fb_data = {
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 7,
+ .left_margin = 5,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .fixed_screen_cpu = 0,
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock not inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xFA0080C0,
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+
+ .init = pcm038_fb_init,
+ .exit = pcm038_fb_exit,
+};
+
/*
* system init for baseboard usage. Will be called by pcm038 init.
*
*/
void __init pcm970_baseboard_init(void)
{
+ mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
}
#include <linux/serial.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
+#include "devices.h"
static struct resource uart0[] = {
{
.num_resources = ARRAY_SIZE(uart3),
};
+#ifdef CONFIG_MACH_MX27
static struct resource uart4[] = {
{
.start = UART5_BASE_ADDR,
.resource = uart5,
.num_resources = ARRAY_SIZE(uart5),
};
+#endif
/*
* Reset the system. It is called by machine_restart().
*/
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
{
struct clk *clk;
-menu "MX3 Options"
- depends on ARCH_MX3
+if ARCH_MX3
+
+config ARCH_MX31
+ bool
+
+config ARCH_MX35
+ bool
+
+comment "MX3 platforms:"
config MACH_MX31ADS
bool "Support MX31ADS platforms"
+ select ARCH_MX31
default y
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX31ADS_WM1133_EV1
+ bool "Support Wolfson Microelectronics 1133-EV1 module"
+ depends on MACH_MX31ADS
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ Include support for the Wolfson Microelectronics 1133-EV1 PMU
+ and audio module for the MX31ADS platform.
+
config MACH_PCM037
- bool "Support Phytec pcm037 platforms"
+ bool "Support Phytec pcm037 (i.MX31) platforms"
+ select ARCH_MX31
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
+ select ARCH_MX31
default n
help
Include support for MX31 LITEKIT platform. This includes specific
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
+ select ARCH_MX31
default n
help
Include support for MX31PDK (3DS) platform. This includes specific
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
+ select ARCH_MX31
default n
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
-endmenu
+config MACH_QONG
+ bool "Support Dave/DENX QongEVB-LITE platform"
+ select ARCH_MX31
+ default n
+ help
+ Include support for Dave/DENX QongEVB-LITE platform. This includes
+ specific configurations for the board and its peripherals.
+endif
# Object file lists.
-obj-y := mm.o clock.o devices.o iomux.o
+obj-y := mm.o devices.o
+obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
+obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o
+obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
+ mx31moboard-marxbot.o
+obj-$(CONFIG_MACH_QONG) += qong.o
--- /dev/null
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+
+#define CCM_CCMR 0x00
+#define CCM_PDR0 0x04
+#define CCM_PDR1 0x08
+#define CCM_PDR2 0x0C
+#define CCM_PDR3 0x10
+#define CCM_PDR4 0x14
+#define CCM_RCSR 0x18
+#define CCM_MPCTL 0x1C
+#define CCM_PPCTL 0x20
+#define CCM_ACMR 0x24
+#define CCM_COSR 0x28
+#define CCM_CGR0 0x2C
+#define CCM_CGR1 0x30
+#define CCM_CGR2 0x34
+#define CCM_CGR3 0x38
+
+#ifdef HAVE_SET_RATE_SUPPORT
+static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
+{
+ u32 min_pre, temp_pre, old_err, err;
+
+ min_pre = (div - 1) / maxpost + 1;
+ old_err = 8;
+
+ for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+ if (div > (temp_pre * maxpost))
+ break;
+
+ if (div < (temp_pre * temp_pre))
+ continue;
+
+ err = div % temp_pre;
+
+ if (err == 0) {
+ *pre = temp_pre;
+ break;
+ }
+
+ err = temp_pre - err;
+
+ if (err < old_err) {
+ old_err = err;
+ *pre = temp_pre;
+ }
+ }
+
+ *post = (div + *pre - 1) / *pre;
+}
+
+/* get the best values for a 3-bit divider combined with a 6-bit divider */
+static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
+{
+ if (div >= 512) {
+ *pre = 8;
+ *post = 64;
+ } else if (div >= 64) {
+ calc_dividers(div, pre, post, 64);
+ } else if (div <= 8) {
+ *pre = div;
+ *post = 1;
+ } else {
+ *pre = 1;
+ *post = div;
+ }
+}
+
+/* get the best values for two cascaded 3-bit dividers */
+static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
+{
+ if (div >= 64) {
+ *pre = *post = 8;
+ } else if (div > 8) {
+ calc_dividers(div, pre, post, 8);
+ } else {
+ *pre = 1;
+ *post = div;
+ }
+}
+#endif
+
+static unsigned long get_rate_mpll(void)
+{
+ ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL);
+
+ return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_ppll(void)
+{
+ ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL);
+
+ return mxc_decode_pll(ppctl, 24000000);
+}
+
+struct arm_ahb_div {
+ unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+ { .arm = 1, .ahb = 4, .sel = 0},
+ { .arm = 1, .ahb = 3, .sel = 1},
+ { .arm = 2, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 1, .sel = 0},
+ { .arm = 1, .ahb = 5, .sel = 0},
+ { .arm = 1, .ahb = 8, .sel = 0},
+ { .arm = 1, .ahb = 6, .sel = 1},
+ { .arm = 2, .ahb = 4, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static struct arm_ahb_div clk_automotive[] = {
+ { .arm = 1, .ahb = 3, .sel = 0},
+ { .arm = 1, .ahb = 2, .sel = 1},
+ { .arm = 2, .ahb = 1, .sel = 1},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 1, .ahb = 6, .sel = 0},
+ { .arm = 1, .ahb = 4, .sel = 1},
+ { .arm = 2, .ahb = 2, .sel = 1},
+ { .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static unsigned long get_rate_arm(void)
+{
+ unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+ struct arm_ahb_div *aad;
+ unsigned long fref = get_rate_mpll();
+
+ if (pdr0 & 1) {
+ /* consumer path */
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+ if (aad->sel)
+ fref = fref * 2 / 3;
+ } else {
+ /* auto path */
+ aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+ if (aad->sel)
+ fref = fref * 3 / 4;
+ }
+ return fref / aad->arm;
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+ unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+ struct arm_ahb_div *aad;
+ unsigned long fref = get_rate_mpll();
+
+ if (pdr0 & 1)
+ /* consumer path */
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+ else
+ /* auto path */
+ aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+
+ return fref / aad->ahb;
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+ return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_3_3_div(unsigned long in)
+{
+ return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+ unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+ unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+ unsigned long div = get_3_3_div(pdr4 >> 10);
+
+ if (pdr3 & (1 << 14))
+ return get_rate_arm() / div;
+ else
+ return get_rate_ppll() / div;
+}
+
+static unsigned long get_rate_sdhc(struct clk *clk)
+{
+ unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+ unsigned long div, rate;
+
+ if (pdr3 & (1 << 6))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ switch (clk->id) {
+ default:
+ case 0:
+ div = pdr3 & 0x3f;
+ break;
+ case 1:
+ div = (pdr3 >> 8) & 0x3f;
+ break;
+ case 2:
+ div = (pdr3 >> 16) & 0x3f;
+ break;
+ }
+
+ return rate / get_3_3_div(div);
+}
+
+static unsigned long get_rate_mshc(struct clk *clk)
+{
+ unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1);
+ unsigned long div1, div2, rate;
+
+ if (pdr1 & (1 << 7))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ div1 = (pdr1 >> 29) & 0x7;
+ div2 = (pdr1 >> 22) & 0x3f;
+
+ return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_ssi(struct clk *clk)
+{
+ unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+ unsigned long div1, div2, rate;
+
+ if (pdr2 & (1 << 6))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ switch (clk->id) {
+ default:
+ case 0:
+ div1 = pdr2 & 0x3f;
+ div2 = (pdr2 >> 24) & 0x7;
+ break;
+ case 1:
+ div1 = (pdr2 >> 8) & 0x3f;
+ div2 = (pdr2 >> 27) & 0x7;
+ break;
+ }
+
+ return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_csi(struct clk *clk)
+{
+ unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+ unsigned long rate;
+
+ if (pdr2 & (1 << 7))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+}
+
+static unsigned long get_rate_ipg_per(struct clk *clk)
+{
+ unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+ unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+ unsigned long div1, div2;
+
+ if (pdr0 & (1 << 26)) {
+ div1 = (pdr4 >> 19) & 0x7;
+ div2 = (pdr4 >> 16) & 0x7;
+ return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+ } else {
+ div1 = (pdr0 >> 12) & 0x7;
+ return get_rate_ahb(NULL) / div1;
+ }
+}
+
+static int clk_cgr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 3 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void clk_cgr_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(3 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = CCM_BASE + er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = clk_cgr_enable, \
+ .disable = clk_cgr_disable, \
+ }
+
+DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL);
+DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL);
+DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL);
+DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL);
+DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL);
+DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL);
+DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL);
+DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL);
+
+DEFINE_CLOCK(fec_clk, 0, CCM_CGR1, 0, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpio1_clk, 0, CCM_CGR1, 2, NULL, NULL);
+DEFINE_CLOCK(gpio2_clk, 1, CCM_CGR1, 4, NULL, NULL);
+DEFINE_CLOCK(gpio3_clk, 2, CCM_CGR1, 6, NULL, NULL);
+DEFINE_CLOCK(gpt_clk, 0, CCM_CGR1, 8, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
+DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, NULL, NULL);
+DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL);
+DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL);
+DEFINE_CLOCK(owire_clk, 0, CCM_CGR1, 26, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(pwm_clk, 0, CCM_CGR1, 28, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(rngc_clk, 0, CCM_CGR1, 30, get_rate_ipg, NULL);
+
+DEFINE_CLOCK(rtc_clk, 0, CCM_CGR2, 0, get_rate_ipg, NULL);
+DEFINE_CLOCK(rtic_clk, 0, CCM_CGR2, 2, get_rate_ahb, NULL);
+DEFINE_CLOCK(scc_clk, 0, CCM_CGR2, 4, get_rate_ipg, NULL);
+DEFINE_CLOCK(sdma_clk, 0, CCM_CGR2, 6, NULL, NULL);
+DEFINE_CLOCK(spba_clk, 0, CCM_CGR2, 8, get_rate_ipg, NULL);
+DEFINE_CLOCK(spdif_clk, 0, CCM_CGR2, 10, NULL, NULL);
+DEFINE_CLOCK(ssi1_clk, 0, CCM_CGR2, 12, get_rate_ssi, NULL);
+DEFINE_CLOCK(ssi2_clk, 1, CCM_CGR2, 14, get_rate_ssi, NULL);
+DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL);
+DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL);
+DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL);
+
+DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL);
+DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL);
+DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK(NULL, "asrc", asrc_clk)
+ _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+ _REGISTER_CLOCK(NULL, "can", can1_clk)
+ _REGISTER_CLOCK(NULL, "can", can2_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK(NULL, "ect", ect_clk)
+ _REGISTER_CLOCK(NULL, "edio", edio_clk)
+ _REGISTER_CLOCK(NULL, "emi", emi_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit1_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit2_clk)
+ _REGISTER_CLOCK(NULL, "esai", esai_clk)
+ _REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk)
+ _REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk)
+ _REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
+ _REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+ _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
+ _REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+ _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK(NULL, "mlb", mlb_clk)
+ _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+ _REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+ _REGISTER_CLOCK(NULL, "rngc", rngc_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+ _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+ _REGISTER_CLOCK(NULL, "scc", scc_clk)
+ _REGISTER_CLOCK(NULL, "sdma", sdma_clk)
+ _REGISTER_CLOCK(NULL, "spba", spba_clk)
+ _REGISTER_CLOCK(NULL, "spdif", spdif_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+ _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK(NULL, "max", max_clk)
+ _REGISTER_CLOCK(NULL, "admux", admux_clk)
+ _REGISTER_CLOCK(NULL, "csi", csi_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
+ _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+};
+
+int __init mx35_clocks_init()
+{
+ int i;
+ unsigned int ll = 0;
+
+ mxc_set_cpu_type(MXC_CPU_MX35);
+
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+ ll = (3 << 16);
+#endif
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* Turn off all clocks except the ones we need to survive, namely:
+ * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
+ */
+ __raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
+ __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
+ CCM_BASE + CCM_CGR1);
+ __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
+ __raw_writel(0, CCM_BASE + CCM_CGR3);
+
+ mxc_timer_init(&gpt_clk);
+
+ return 0;
+}
+
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
#include <mach/clock.h>
#include <mach/hardware.h>
-#include <asm/div64.h>
+#include <mach/common.h>
#include "crm_regs.h"
}
static struct clk mcu_pll_clk;
-static struct clk mcu_main_clk;
-static struct clk usb_pll_clk;
static struct clk serial_pll_clk;
static struct clk ipg_clk;
static struct clk ckih_clk;
-static struct clk ahb_clk;
-static int _clk_enable(struct clk *clk)
+static int cgr_enable(struct clk *clk)
{
u32 reg;
+ if (!clk->enable_reg)
+ return 0;
+
reg = __raw_readl(clk->enable_reg);
reg |= 3 << clk->enable_shift;
__raw_writel(reg, clk->enable_reg);
return 0;
}
-static void _clk_disable(struct clk *clk)
+static void cgr_disable(struct clk *clk)
{
u32 reg;
+ if (!clk->enable_reg)
+ return;
+
reg = __raw_readl(clk->enable_reg);
reg &= ~(3 << clk->enable_shift);
+
+ /* special case for EMI clock */
+ if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
+ reg |= (1 << clk->enable_shift);
+
__raw_writel(reg, clk->enable_reg);
}
-static void _clk_emi_disable(struct clk *clk)
+static unsigned long pll_ref_get_rate(void)
{
- u32 reg;
+ unsigned long ccmr;
+ unsigned int prcs;
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(3 << clk->enable_shift);
- reg |= (1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
+ ccmr = __raw_readl(MXC_CCM_CCMR);
+ prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+ if (prcs == 0x1)
+ return CKIL_CLK_FREQ * 1024;
+ else
+ return clk_get_rate(&ckih_clk);
}
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+static unsigned long usb_pll_get_rate(struct clk *clk)
{
- u32 reg;
- signed long pd = 1; /* Pre-divider */
- signed long mfi; /* Multiplication Factor (Integer part) */
- signed long mfn; /* Multiplication Factor (Integer part) */
- signed long mfd; /* Multiplication Factor (Denominator Part) */
- signed long tmp;
- u32 ref_freq = clk_get_rate(clk->parent);
+ unsigned long reg;
- while (((ref_freq / pd) * 10) > rate)
- pd++;
+ reg = __raw_readl(MXC_CCM_UPCTL);
- if ((ref_freq / pd) < PRE_DIV_MIN_FREQ)
- return -EINVAL;
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
- /* the ref_freq/2 in the following is to round up */
- mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq;
- if (mfi < 5 || mfi > 15)
- return -EINVAL;
+static unsigned long serial_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg;
- /* pick a mfd value that will work
- * then solve for mfn */
- mfd = ref_freq / 50000;
-
- /*
- * pll_freq * pd * mfd
- * mfn = -------------------- - (mfi * mfd)
- * 2 * ref_freq
- */
- /* the tmp/2 is for rounding */
- tmp = ref_freq / 10000;
- mfn =
- ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) -
- (mfi * mfd);
-
- mfn = mfn & 0x3ff;
- pd--;
- mfd--;
-
- /* Change the Pll value */
- reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) |
- (mfn << MXC_CCM_PCTL_MFN_OFFSET) |
- (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET);
-
- if (clk == &mcu_pll_clk)
- __raw_writel(reg, MXC_CCM_MPCTL);
- else if (clk == &usb_pll_clk)
- __raw_writel(reg, MXC_CCM_UPCTL);
- else if (clk == &serial_pll_clk)
- __raw_writel(reg, MXC_CCM_SRPCTL);
+ reg = __raw_readl(MXC_CCM_SRPCTL);
- return 0;
+ return mxc_decode_pll(reg, pll_ref_get_rate());
}
-static unsigned long _clk_pll_get_rate(struct clk *clk)
+static unsigned long mcu_pll_get_rate(struct clk *clk)
{
- long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
unsigned long reg, ccmr;
- s64 temp;
- unsigned int prcs;
ccmr = __raw_readl(MXC_CCM_CCMR);
- prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
- if (prcs == 0x1)
- ref_clk = CKIL_CLK_FREQ * 1024;
- else
- ref_clk = clk_get_rate(&ckih_clk);
-
- if (clk == &mcu_pll_clk) {
- if ((ccmr & MXC_CCM_CCMR_MPE) == 0)
- return ref_clk;
- if ((ccmr & MXC_CCM_CCMR_MDS) != 0)
- return ref_clk;
- reg = __raw_readl(MXC_CCM_MPCTL);
- } else if (clk == &usb_pll_clk)
- reg = __raw_readl(MXC_CCM_UPCTL);
- else if (clk == &serial_pll_clk)
- reg = __raw_readl(MXC_CCM_SRPCTL);
- else {
- BUG();
- return 0;
- }
-
- pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET;
- mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET;
- mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET;
- mfi = (mfi <= 5) ? 5 : mfi;
- mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK;
- if (mfn >= 0x200) {
- mfn |= 0xFFFFFE00;
- mfn_abs = -mfn;
- }
-
- ref_clk *= 2;
- ref_clk /= pdf + 1;
+ if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
+ return clk_get_rate(&ckih_clk);
- temp = (u64) ref_clk * mfn_abs;
- do_div(temp, mfd + 1);
- if (mfn < 0)
- temp = -temp;
- temp = (ref_clk * mfi) + temp;
+ reg = __raw_readl(MXC_CCM_MPCTL);
- return temp;
+ return mxc_decode_pll(reg, pll_ref_get_rate());
}
-static int _clk_usb_pll_enable(struct clk *clk)
+static int usb_pll_enable(struct clk *clk)
{
u32 reg;
return 0;
}
-static void _clk_usb_pll_disable(struct clk *clk)
+static void usb_pll_disable(struct clk *clk)
{
u32 reg;
__raw_writel(reg, MXC_CCM_CCMR);
}
-static int _clk_serial_pll_enable(struct clk *clk)
+static int serial_pll_enable(struct clk *clk)
{
u32 reg;
return 0;
}
-static void _clk_serial_pll_disable(struct clk *clk)
+static void serial_pll_disable(struct clk *clk)
{
u32 reg;
#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
+static unsigned long mcu_main_get_rate(struct clk *clk)
{
u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
return clk_get_rate(&mcu_pll_clk);
}
-static unsigned long _clk_hclk_get_rate(struct clk *clk)
+static unsigned long ahb_get_rate(struct clk *clk)
{
unsigned long max_pdf;
return clk_get_rate(clk->parent) / (max_pdf + 1);
}
-static unsigned long _clk_ipg_get_rate(struct clk *clk)
+static unsigned long ipg_get_rate(struct clk *clk)
{
unsigned long ipg_pdf;
return clk_get_rate(clk->parent) / (ipg_pdf + 1);
}
-static unsigned long _clk_nfc_get_rate(struct clk *clk)
+static unsigned long nfc_get_rate(struct clk *clk)
{
unsigned long nfc_pdf;
return clk_get_rate(clk->parent) / (nfc_pdf + 1);
}
-static unsigned long _clk_hsp_get_rate(struct clk *clk)
+static unsigned long hsp_get_rate(struct clk *clk)
{
unsigned long hsp_pdf;
return clk_get_rate(clk->parent) / (hsp_pdf + 1);
}
-static unsigned long _clk_usb_get_rate(struct clk *clk)
+static unsigned long usb_get_rate(struct clk *clk)
{
unsigned long usb_pdf, usb_prepdf;
return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
}
-static unsigned long _clk_csi_get_rate(struct clk *clk)
+static unsigned long csi_get_rate(struct clk *clk)
{
u32 reg, pre, post;
return clk_get_rate(clk->parent) / (pre * post);
}
-static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
{
u32 pre, post, parent = clk_get_rate(clk->parent);
u32 div = parent / rate;
return parent / (pre * post);
}
-static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
+static int csi_set_rate(struct clk *clk, unsigned long rate)
{
u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
return 0;
}
-static unsigned long _clk_per_get_rate(struct clk *clk)
-{
- unsigned long per_pdf;
-
- per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK,
- MXC_CCM_PDR0_PER_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (per_pdf + 1);
-}
-
-static unsigned long _clk_ssi1_get_rate(struct clk *clk)
+static unsigned long ssi1_get_rate(struct clk *clk)
{
unsigned long ssi1_pdf, ssi1_prepdf;
return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
}
-static unsigned long _clk_ssi2_get_rate(struct clk *clk)
+static unsigned long ssi2_get_rate(struct clk *clk)
{
unsigned long ssi2_pdf, ssi2_prepdf;
return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
}
-static unsigned long _clk_firi_get_rate(struct clk *clk)
+static unsigned long firi_get_rate(struct clk *clk)
{
unsigned long firi_pdf, firi_prepdf;
return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
}
-static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
{
u32 pre, post;
u32 parent = clk_get_rate(clk->parent);
}
-static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
+static int firi_set_rate(struct clk *clk, unsigned long rate)
{
u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
return 0;
}
-static unsigned long _clk_mbx_get_rate(struct clk *clk)
+static unsigned long mbx_get_rate(struct clk *clk)
{
return clk_get_rate(clk->parent) / 2;
}
-static unsigned long _clk_mstick1_get_rate(struct clk *clk)
+static unsigned long mstick1_get_rate(struct clk *clk)
{
unsigned long msti_pdf;
return clk_get_rate(clk->parent) / (msti_pdf + 1);
}
-static unsigned long _clk_mstick2_get_rate(struct clk *clk)
+static unsigned long mstick2_get_rate(struct clk *clk)
{
unsigned long msti_pdf;
}
static struct clk ckih_clk = {
- .name = "ckih",
.get_rate = clk_ckih_get_rate,
};
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
- return CKIL_CLK_FREQ;
-}
-
-static struct clk ckil_clk = {
- .name = "ckil",
- .get_rate = clk_ckil_get_rate,
-};
-
static struct clk mcu_pll_clk = {
- .name = "mcu_pll",
.parent = &ckih_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = _clk_pll_get_rate,
+ .get_rate = mcu_pll_get_rate,
};
static struct clk mcu_main_clk = {
- .name = "mcu_main_clk",
.parent = &mcu_pll_clk,
- .get_rate = _clk_mcu_main_get_rate,
+ .get_rate = mcu_main_get_rate,
};
static struct clk serial_pll_clk = {
- .name = "serial_pll",
.parent = &ckih_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = _clk_pll_get_rate,
- .enable = _clk_serial_pll_enable,
- .disable = _clk_serial_pll_disable,
+ .get_rate = serial_pll_get_rate,
+ .enable = serial_pll_enable,
+ .disable = serial_pll_disable,
};
static struct clk usb_pll_clk = {
- .name = "usb_pll",
.parent = &ckih_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = _clk_pll_get_rate,
- .enable = _clk_usb_pll_enable,
- .disable = _clk_usb_pll_disable,
+ .get_rate = usb_pll_get_rate,
+ .enable = usb_pll_enable,
+ .disable = usb_pll_disable,
};
static struct clk ahb_clk = {
- .name = "ahb_clk",
.parent = &mcu_main_clk,
- .get_rate = _clk_hclk_get_rate,
-};
-
-static struct clk per_clk = {
- .name = "per_clk",
- .parent = &usb_pll_clk,
- .get_rate = _clk_per_get_rate,
-};
-
-static struct clk perclk_clk = {
- .name = "perclk_clk",
- .parent = &ipg_clk,
-};
-
-static struct clk cspi_clk[] = {
- {
- .name = "cspi_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "cspi_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "cspi_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk ipg_clk = {
- .name = "ipg_clk",
- .parent = &ahb_clk,
- .get_rate = _clk_ipg_get_rate,
-};
-
-static struct clk emi_clk = {
- .name = "emi_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_EMI_OFFSET,
- .disable = _clk_emi_disable,
-};
-
-static struct clk gpt_clk = {
- .name = "gpt_clk",
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_GPT_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR1_PWM_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk epit_clk[] = {
- {
- .name = "epit_clk",
- .id = 0,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "epit_clk",
- .id = 1,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk nfc_clk = {
- .name = "nfc_clk",
- .parent = &ahb_clk,
- .get_rate = _clk_nfc_get_rate,
-};
-
-static struct clk scc_clk = {
- .name = "scc_clk",
- .parent = &ipg_clk,
-};
-
-static struct clk ipu_clk = {
- .name = "ipu_clk",
- .parent = &mcu_main_clk,
- .get_rate = _clk_hsp_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_IPU_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
- .name = "kpp_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_KPP_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk wdog_clk = {
- .name = "wdog_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_WDOG_OFFSET,
- .disable = _clk_disable,
-};
-static struct clk rtc_clk = {
- .name = "rtc_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_RTC_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk usb_clk[] = {
- {
- .name = "usb_clk",
- .parent = &usb_pll_clk,
- .get_rate = _clk_usb_get_rate,},
- {
- .name = "usb_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk csi_clk = {
- .name = "csi_clk",
- .parent = &serial_pll_clk,
- .get_rate = _clk_csi_get_rate,
- .round_rate = _clk_csi_round_rate,
- .set_rate = _clk_csi_set_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_CSI_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk uart_clk[] = {
- {
- .name = "uart_clk",
- .id = 0,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "uart_clk",
- .id = 1,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "uart_clk",
- .id = 2,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "uart_clk",
- .id = 3,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "uart_clk",
- .id = 4,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_UART5_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk i2c_clk[] = {
- {
- .name = "i2c_clk",
- .id = 0,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "i2c_clk",
- .id = 1,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "i2c_clk",
- .id = 2,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk owire_clk = {
- .name = "owire_clk",
- .parent = &perclk_clk,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
- .enable = _clk_enable,
- .disable = _clk_disable,
-};
-
-static struct clk sdhc_clk[] = {
- {
- .name = "sdhc_clk",
- .id = 0,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "sdhc_clk",
- .id = 1,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk ssi_clk[] = {
- {
- .name = "ssi_clk",
- .parent = &serial_pll_clk,
- .get_rate = _clk_ssi1_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "ssi_clk",
- .id = 1,
- .parent = &serial_pll_clk,
- .get_rate = _clk_ssi2_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk firi_clk = {
- .name = "firi_clk",
- .parent = &usb_pll_clk,
- .round_rate = _clk_firi_round_rate,
- .set_rate = _clk_firi_set_rate,
- .get_rate = _clk_firi_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_FIRI_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk ata_clk = {
- .name = "ata_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_ATA_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk mbx_clk = {
- .name = "mbx_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
- .get_rate = _clk_mbx_get_rate,
-};
-
-static struct clk vpu_clk = {
- .name = "vpu_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
- .get_rate = _clk_mbx_get_rate,
-};
-
-static struct clk rtic_clk = {
- .name = "rtic_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_RTIC_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk rng_clk = {
- .name = "rng_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_RNG_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk sdma_clk[] = {
- {
- .name = "sdma_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "sdma_ipg_clk",
- .parent = &ipg_clk,}
-};
-
-static struct clk mpeg4_clk = {
- .name = "mpeg4_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk vl2cc_clk = {
- .name = "vl2cc_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk mstick_clk[] = {
- {
- .name = "mstick_clk",
- .id = 0,
- .parent = &usb_pll_clk,
- .get_rate = _clk_mstick1_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "mstick_clk",
- .id = 1,
- .parent = &usb_pll_clk,
- .get_rate = _clk_mstick2_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk iim_clk = {
- .name = "iim_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_IIM_OFFSET,
- .disable = _clk_disable,
-};
-
-static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 div, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
- if (parent % rate)
- div++;
-
- if (div > 8)
- div = 16;
- else if (div > 4)
- div = 8;
- else if (div > 2)
- div = 4;
-
- return parent / div;
-}
-
-static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if (div == 16)
- div = 4;
- else if (div == 8)
- div = 3;
- else if (div == 4)
- div = 2;
- else if (div == 2)
- div = 1;
- else if (div == 1)
- div = 0;
- else
- return -EINVAL;
-
- reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK;
- reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET;
- __raw_writel(reg, MXC_CCM_COSR);
-
- return 0;
-}
-
-static unsigned long _clk_cko1_get_rate(struct clk *clk)
-{
- u32 div;
-
- div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >>
- MXC_CCM_COSR_CLKOUTDIV_OFFSET;
-
- return clk_get_rate(clk->parent) / (1 << div);
-}
-
-static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK;
-
- if (parent == &mcu_main_clk)
- reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &ipg_clk)
- reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &usb_pll_clk)
- reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == mcu_main_clk.parent)
- reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &ahb_clk)
- reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &serial_pll_clk)
- reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &ckih_clk)
- reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &emi_clk)
- reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &ipu_clk)
- reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &nfc_clk)
- reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &uart_clk[0])
- reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_COSR);
-
- return 0;
-}
-
-static int _clk_cko1_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN;
- __raw_writel(reg, MXC_CCM_COSR);
+ .get_rate = ahb_get_rate,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .enable = cgr_enable, \
+ .disable = cgr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
- return 0;
-}
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = getsetround##_get_rate, \
+ .set_rate = getsetround##_set_rate, \
+ .round_rate = getsetround##_round_rate, \
+ .enable = cgr_enable, \
+ .disable = cgr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
-static void _clk_cko1_disable(struct clk *clk)
+DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
+
+DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK(NULL, "emi", emi_clk)
+ _REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
+ _REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
+ _REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+ _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit1_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit2_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+ _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+ _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mx3-camera.0", "csi", csi_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+ _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+ _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+ _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+ _REGISTER_CLOCK(NULL, "firi", firi_clk)
+ _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+ _REGISTER_CLOCK(NULL, "rng", rng_clk)
+ _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+ _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
+ _REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
+ _REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
+ _REGISTER_CLOCK(NULL, "scc", scc_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
+ _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
+ _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+};
+
+int __init mx31_clocks_init(unsigned long fref)
{
u32 reg;
+ int i;
- reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN;
- __raw_writel(reg, MXC_CCM_COSR);
-}
-
-static struct clk cko1_clk = {
- .name = "cko1_clk",
- .get_rate = _clk_cko1_get_rate,
- .set_rate = _clk_cko1_set_rate,
- .round_rate = _clk_cko1_round_rate,
- .set_parent = _clk_cko1_set_parent,
- .enable = _clk_cko1_enable,
- .disable = _clk_cko1_disable,
-};
-
-static struct clk *mxc_clks[] = {
- &ckih_clk,
- &ckil_clk,
- &mcu_pll_clk,
- &usb_pll_clk,
- &serial_pll_clk,
- &mcu_main_clk,
- &ahb_clk,
- &per_clk,
- &perclk_clk,
- &cko1_clk,
- &emi_clk,
- &cspi_clk[0],
- &cspi_clk[1],
- &cspi_clk[2],
- &ipg_clk,
- &gpt_clk,
- &pwm_clk,
- &wdog_clk,
- &rtc_clk,
- &epit_clk[0],
- &epit_clk[1],
- &nfc_clk,
- &ipu_clk,
- &kpp_clk,
- &usb_clk[0],
- &usb_clk[1],
- &csi_clk,
- &uart_clk[0],
- &uart_clk[1],
- &uart_clk[2],
- &uart_clk[3],
- &uart_clk[4],
- &i2c_clk[0],
- &i2c_clk[1],
- &i2c_clk[2],
- &owire_clk,
- &sdhc_clk[0],
- &sdhc_clk[1],
- &ssi_clk[0],
- &ssi_clk[1],
- &firi_clk,
- &ata_clk,
- &rtic_clk,
- &rng_clk,
- &sdma_clk[0],
- &sdma_clk[1],
- &mstick_clk[0],
- &mstick_clk[1],
- &scc_clk,
- &iim_clk,
-};
-
-int __init mxc_clocks_init(unsigned long fref)
-{
- u32 reg;
- struct clk **clkp;
+ mxc_set_cpu_type(MXC_CPU_MX31);
ckih_rate = fref;
- for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
- clk_register(*clkp);
-
- if (cpu_is_mx31()) {
- clk_register(&mpeg4_clk);
- clk_register(&mbx_clk);
- } else {
- clk_register(&vpu_clk);
- clk_register(&vl2cc_clk);
- }
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
/* Turn off all possible clocks */
- __raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0);
+ __raw_writel((3 << 4), MXC_CCM_CGR0);
__raw_writel(0, MXC_CCM_CGR1);
-
- __raw_writel(MXC_CCM_CGR2_EMI_MASK |
- MXC_CCM_CGR2_IPMUX1_MASK |
- MXC_CCM_CGR2_IPMUX2_MASK |
- MXC_CCM_CGR2_MXCCLKENSEL_MASK | /* for MX32 */
- MXC_CCM_CGR2_CHIKCAMPEN_MASK | /* for MX32 */
- MXC_CCM_CGR2_OVRVPUBUSY_MASK | /* for MX32 */
+ __raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
MX32, but still required to be set */
MXC_CCM_CGR2);
- clk_disable(&cko1_clk);
- clk_disable(&usb_pll_clk);
+ usb_pll_disable(&usb_pll_clk);
pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
__raw_writel(reg, MXC_CCM_PMCR1);
}
+ mxc_timer_init(&ipg_clk);
+
return 0;
}
#define MXC_CCM_PDR0_MCU_PODF_OFFSET 0
#define MXC_CCM_PDR0_MCU_PODF_MASK 0x7
-#define MXC_CCM_PDR0_HSP_DIV_1 (0x0 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_2 (0x1 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_3 (0x2 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_4 (0x3 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_5 (0x4 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_6 (0x5 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_7 (0x6 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_8 (0x7 << 11)
-
-#define MXC_CCM_PDR0_IPG_DIV_1 (0x0 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_2 (0x1 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_3 (0x2 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_4 (0x3 << 6)
-
-#define MXC_CCM_PDR0_MAX_DIV_1 (0x0 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_2 (0x1 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_3 (0x2 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_4 (0x3 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_5 (0x4 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_6 (0x5 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_7 (0x6 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_8 (0x7 << 3)
-
-#define MXC_CCM_PDR0_NFC_DIV_1 (0x0 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_2 (0x1 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_3 (0x2 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_4 (0x3 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_5 (0x4 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_6 (0x5 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_7 (0x6 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_8 (0x7 << 8)
-
-#define MXC_CCM_PDR0_MCU_DIV_1 0x0
-#define MXC_CCM_PDR0_MCU_DIV_2 0x1
-#define MXC_CCM_PDR0_MCU_DIV_3 0x2
-#define MXC_CCM_PDR0_MCU_DIV_4 0x3
-#define MXC_CCM_PDR0_MCU_DIV_5 0x4
-#define MXC_CCM_PDR0_MCU_DIV_6 0x5
-#define MXC_CCM_PDR0_MCU_DIV_7 0x6
-#define MXC_CCM_PDR0_MCU_DIV_8 0x7
-
#define MXC_CCM_PDR1_USB_PRDF_OFFSET 30
#define MXC_CCM_PDR1_USB_PRDF_MASK (0x3 << 30)
#define MXC_CCM_PDR1_USB_PODF_OFFSET 27
/* Bit definitions for RCSR */
#define MXC_CCM_RCSR_NF16B 0x80000000
-/* Bit definitions for both MCU, USB and SR PLL control registers */
-#define MXC_CCM_PCTL_BRM 0x80000000
-#define MXC_CCM_PCTL_PD_OFFSET 26
-#define MXC_CCM_PCTL_PD_MASK (0xF << 26)
-#define MXC_CCM_PCTL_MFD_OFFSET 16
-#define MXC_CCM_PCTL_MFD_MASK (0x3FF << 16)
-#define MXC_CCM_PCTL_MFI_OFFSET 10
-#define MXC_CCM_PCTL_MFI_MASK (0xF << 10)
-#define MXC_CCM_PCTL_MFN_OFFSET 0
-#define MXC_CCM_PCTL_MFN_MASK 0x3FF
-
-#define MXC_CCM_CGR0_SD_MMC1_OFFSET 0
-#define MXC_CCM_CGR0_SD_MMC1_MASK (0x3 << 0)
-#define MXC_CCM_CGR0_SD_MMC2_OFFSET 2
-#define MXC_CCM_CGR0_SD_MMC2_MASK (0x3 << 2)
-#define MXC_CCM_CGR0_GPT_OFFSET 4
-#define MXC_CCM_CGR0_GPT_MASK (0x3 << 4)
-#define MXC_CCM_CGR0_EPIT1_OFFSET 6
-#define MXC_CCM_CGR0_EPIT1_MASK (0x3 << 6)
-#define MXC_CCM_CGR0_EPIT2_OFFSET 8
-#define MXC_CCM_CGR0_EPIT2_MASK (0x3 << 8)
-#define MXC_CCM_CGR0_IIM_OFFSET 10
-#define MXC_CCM_CGR0_IIM_MASK (0x3 << 10)
-#define MXC_CCM_CGR0_ATA_OFFSET 12
-#define MXC_CCM_CGR0_ATA_MASK (0x3 << 12)
-#define MXC_CCM_CGR0_SDMA_OFFSET 14
-#define MXC_CCM_CGR0_SDMA_MASK (0x3 << 14)
-#define MXC_CCM_CGR0_CSPI3_OFFSET 16
-#define MXC_CCM_CGR0_CSPI3_MASK (0x3 << 16)
-#define MXC_CCM_CGR0_RNG_OFFSET 18
-#define MXC_CCM_CGR0_RNG_MASK (0x3 << 18)
-#define MXC_CCM_CGR0_UART1_OFFSET 20
-#define MXC_CCM_CGR0_UART1_MASK (0x3 << 20)
-#define MXC_CCM_CGR0_UART2_OFFSET 22
-#define MXC_CCM_CGR0_UART2_MASK (0x3 << 22)
-#define MXC_CCM_CGR0_SSI1_OFFSET 24
-#define MXC_CCM_CGR0_SSI1_MASK (0x3 << 24)
-#define MXC_CCM_CGR0_I2C1_OFFSET 26
-#define MXC_CCM_CGR0_I2C1_MASK (0x3 << 26)
-#define MXC_CCM_CGR0_I2C2_OFFSET 28
-#define MXC_CCM_CGR0_I2C2_MASK (0x3 << 28)
-#define MXC_CCM_CGR0_I2C3_OFFSET 30
-#define MXC_CCM_CGR0_I2C3_MASK (0x3 << 30)
-
-#define MXC_CCM_CGR1_HANTRO_OFFSET 0
-#define MXC_CCM_CGR1_HANTRO_MASK (0x3 << 0)
-#define MXC_CCM_CGR1_MEMSTICK1_OFFSET 2
-#define MXC_CCM_CGR1_MEMSTICK1_MASK (0x3 << 2)
-#define MXC_CCM_CGR1_MEMSTICK2_OFFSET 4
-#define MXC_CCM_CGR1_MEMSTICK2_MASK (0x3 << 4)
-#define MXC_CCM_CGR1_CSI_OFFSET 6
-#define MXC_CCM_CGR1_CSI_MASK (0x3 << 6)
-#define MXC_CCM_CGR1_RTC_OFFSET 8
-#define MXC_CCM_CGR1_RTC_MASK (0x3 << 8)
-#define MXC_CCM_CGR1_WDOG_OFFSET 10
-#define MXC_CCM_CGR1_WDOG_MASK (0x3 << 10)
-#define MXC_CCM_CGR1_PWM_OFFSET 12
-#define MXC_CCM_CGR1_PWM_MASK (0x3 << 12)
-#define MXC_CCM_CGR1_SIM_OFFSET 14
-#define MXC_CCM_CGR1_SIM_MASK (0x3 << 14)
-#define MXC_CCM_CGR1_ECT_OFFSET 16
-#define MXC_CCM_CGR1_ECT_MASK (0x3 << 16)
-#define MXC_CCM_CGR1_USBOTG_OFFSET 18
-#define MXC_CCM_CGR1_USBOTG_MASK (0x3 << 18)
-#define MXC_CCM_CGR1_KPP_OFFSET 20
-#define MXC_CCM_CGR1_KPP_MASK (0x3 << 20)
-#define MXC_CCM_CGR1_IPU_OFFSET 22
-#define MXC_CCM_CGR1_IPU_MASK (0x3 << 22)
-#define MXC_CCM_CGR1_UART3_OFFSET 24
-#define MXC_CCM_CGR1_UART3_MASK (0x3 << 24)
-#define MXC_CCM_CGR1_UART4_OFFSET 26
-#define MXC_CCM_CGR1_UART4_MASK (0x3 << 26)
-#define MXC_CCM_CGR1_UART5_OFFSET 28
-#define MXC_CCM_CGR1_UART5_MASK (0x3 << 28)
-#define MXC_CCM_CGR1_OWIRE_OFFSET 30
-#define MXC_CCM_CGR1_OWIRE_MASK (0x3 << 30)
-
-#define MXC_CCM_CGR2_SSI2_OFFSET 0
-#define MXC_CCM_CGR2_SSI2_MASK (0x3 << 0)
-#define MXC_CCM_CGR2_CSPI1_OFFSET 2
-#define MXC_CCM_CGR2_CSPI1_MASK (0x3 << 2)
-#define MXC_CCM_CGR2_CSPI2_OFFSET 4
-#define MXC_CCM_CGR2_CSPI2_MASK (0x3 << 4)
-#define MXC_CCM_CGR2_GACC_OFFSET 6
-#define MXC_CCM_CGR2_GACC_MASK (0x3 << 6)
-#define MXC_CCM_CGR2_EMI_OFFSET 8
-#define MXC_CCM_CGR2_EMI_MASK (0x3 << 8)
-#define MXC_CCM_CGR2_RTIC_OFFSET 10
-#define MXC_CCM_CGR2_RTIC_MASK (0x3 << 10)
-#define MXC_CCM_CGR2_FIRI_OFFSET 12
-#define MXC_CCM_CGR2_FIRI_MASK (0x3 << 12)
-#define MXC_CCM_CGR2_IPMUX1_OFFSET 14
-#define MXC_CCM_CGR2_IPMUX1_MASK (0x3 << 14)
-#define MXC_CCM_CGR2_IPMUX2_OFFSET 16
-#define MXC_CCM_CGR2_IPMUX2_MASK (0x3 << 16)
-
-/* These new CGR2 bits are added in MX32 */
-#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET 18
-#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK (0x3 << 18)
-#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET 20
-#define MXC_CCM_CGR2_APMSSICLKSEL_MASK (0x3 << 20)
-#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET 22
-#define MXC_CCM_CGR2_APMPERCLKSEL_MASK (0x3 << 22)
-#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET 24
-#define MXC_CCM_CGR2_MXCCLKENSEL_MASK (0x1 << 24)
-#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET 25
-#define MXC_CCM_CGR2_CHIKCAMPEN_MASK (0x1 << 25)
-#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET 26
-#define MXC_CCM_CGR2_OVRVPUBUSY_MASK (0x1 << 26)
-#define MXC_CCM_CGR2_APMENA_OFFSET 30
-#define MXC_CCM_CGR2_AOMENA_MASK (0x1 << 30)
-
/*
* LTR0 register offsets
*/
#include <mach/irqs.h>
#include <mach/imx-uart.h>
+#include "devices.h"
+
static struct resource uart0[] = {
{
.start = UART1_BASE_ADDR,
.num_resources = ARRAY_SIZE(uart2),
};
+#ifdef CONFIG_ARCH_MX31
static struct resource uart3[] = {
{
.start = UART4_BASE_ADDR,
.resource = uart4,
.num_resources = ARRAY_SIZE(uart4),
};
+#endif /* CONFIG_ARCH_MX31 */
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
static struct resource mxc_nand_resources[] = {
{
- .start = NFC_BASE_ADDR,
- .end = NFC_BASE_ADDR + 0xfff,
+ .start = 0, /* runtime dependent */
+ .end = 0,
.flags = IORESOURCE_MEM
}, {
.start = MXC_INT_NANDFC,
.num_resources = ARRAY_SIZE(mxc_nand_resources),
.resource = mxc_nand_resources,
};
+
+static struct resource mxc_i2c0_resources[] = {
+ {
+ .start = I2C_BASE_ADDR,
+ .end = I2C_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MXC_INT_I2C,
+ .end = MXC_INT_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_i2c_device0 = {
+ .name = "imx-i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_i2c0_resources),
+ .resource = mxc_i2c0_resources,
+};
+
+static struct resource mxc_i2c1_resources[] = {
+ {
+ .start = I2C2_BASE_ADDR,
+ .end = I2C2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MXC_INT_I2C2,
+ .end = MXC_INT_I2C2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_i2c_device1 = {
+ .name = "imx-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_i2c1_resources),
+ .resource = mxc_i2c1_resources,
+};
+
+static struct resource mxc_i2c2_resources[] = {
+ {
+ .start = I2C3_BASE_ADDR,
+ .end = I2C3_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MXC_INT_I2C3,
+ .end = MXC_INT_I2C3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_i2c_device2 = {
+ .name = "imx-i2c",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_i2c2_resources),
+ .resource = mxc_i2c2_resources,
+};
+
+#ifdef CONFIG_ARCH_MX31
+static struct resource mxcsdhc0_resources[] = {
+ {
+ .start = MMC_SDHC1_BASE_ADDR,
+ .end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_MMC_SDHC1,
+ .end = MXC_INT_MMC_SDHC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource mxcsdhc1_resources[] = {
+ {
+ .start = MMC_SDHC2_BASE_ADDR,
+ .end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_MMC_SDHC2,
+ .end = MXC_INT_MMC_SDHC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxcsdhc_device0 = {
+ .name = "mxc-mmc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxcsdhc0_resources),
+ .resource = mxcsdhc0_resources,
+};
+
+struct platform_device mxcsdhc_device1 = {
+ .name = "mxc-mmc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxcsdhc1_resources),
+ .resource = mxcsdhc1_resources,
+};
+#endif /* CONFIG_ARCH_MX31 */
+
+/* i.MX31 Image Processing Unit */
+
+/* The resource order is important! */
+static struct resource mx3_ipu_rsrc[] = {
+ {
+ .start = IPU_CTRL_BASE_ADDR,
+ .end = IPU_CTRL_BASE_ADDR + 0x5F,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IPU_CTRL_BASE_ADDR + 0x88,
+ .end = IPU_CTRL_BASE_ADDR + 0xB3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_IPU_SYN,
+ .end = MXC_INT_IPU_SYN,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC_INT_IPU_ERR,
+ .end = MXC_INT_IPU_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mx3_ipu = {
+ .name = "ipu-core",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mx3_ipu_rsrc),
+ .resource = mx3_ipu_rsrc,
+};
+
+static struct resource fb_resources[] = {
+ {
+ .start = IPU_CTRL_BASE_ADDR + 0xB4,
+ .end = IPU_CTRL_BASE_ADDR + 0x1BF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mx3_fb = {
+ .name = "mx3_sdc_fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(fb_resources),
+ .resource = fb_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+#ifdef CONFIG_ARCH_MX35
+static struct resource mxc_fec_resources[] = {
+ {
+ .start = MXC_FEC_BASE_ADDR,
+ .end = MXC_FEC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = MXC_INT_FEC,
+ .end = MXC_INT_FEC,
+ .flags = IORESOURCE_IRQ
+ },
+};
+
+struct platform_device mxc_fec_device = {
+ .name = "fec",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_fec_resources),
+ .resource = mxc_fec_resources,
+};
+#endif
+
+static int mx3_devices_init(void)
+{
+ if (cpu_is_mx31()) {
+ mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
+ mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ }
+ if (cpu_is_mx35()) {
+ mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
+ mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+ }
+
+ return 0;
+}
+
+subsys_initcall(mx3_devices_init);
extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_w1_master_device;
extern struct platform_device mxc_nand_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx3_ipu;
+extern struct platform_device mx3_fb;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxcsdhc_device0;
+extern struct platform_device mxcsdhc_device1;
/*
* Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/iomux-mx3.h>
static DEFINE_SPINLOCK(gpio_mux_lock);
#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
/*
* set the mode for a IOMUX pin.
*/
field = pin_mode & 0x3;
mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
- pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n",
- __func__, (pin_mode & IOMUX_REG_MASK), field, mode);
-
spin_lock(&gpio_mux_lock);
l = __raw_readl(reg);
}
EXPORT_SYMBOL(mxc_iomux_set_pad);
+/*
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
+ */
+int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+{
+ unsigned pad = pin & IOMUX_PADNUM_MASK;
+ unsigned gpio;
+
+ if (pad >= (PIN_MAX + 1)) {
+ printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+ pad, label ? label : "?");
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+ printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+ pad, label ? label : "?");
+ return -EINVAL;
+ }
+ mxc_iomux_mode(pin);
+
+ /* if we have a gpio, we can allocate it */
+ gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
+ if (gpio < (GPIO_PORT_MAX + 1) * 32)
+ if (gpio_request(gpio, label))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label)
+{
+ unsigned int *p = pin_list;
+ int i;
+ int ret = -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ if (mxc_iomux_setup_pin(*p, label))
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_release_multiple_pins(pin_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin)
+{
+ unsigned pad = pin & IOMUX_PADNUM_MASK;
+ unsigned gpio;
+
+ if (pad < (PIN_MAX + 1))
+ clear_bit(pad, mxc_pin_alloc_map);
+
+ gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
+ if (gpio < (GPIO_PORT_MAX + 1) * 32)
+ gpio_free(gpio);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+ unsigned int *p = pin_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_release_pin(*p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
/*
* This function enables/disables the general purpose function for a particular
* signal.
spin_unlock(&gpio_mux_lock);
}
EXPORT_SYMBOL(mxc_iomux_set_gpr);
-
#include <linux/mm.h>
#include <linux/init.h>
-#include <mach/hardware.h>
+#include <linux/err.h>
+
#include <asm/pgtable.h>
#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
#include <mach/common.h>
+#include <mach/hardware.h>
/*!
* @file mm.c
.pfn = __phys_to_pfn(AVIC_BASE_ADDR),
.length = AVIC_SIZE,
.type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+ .length = AIPS1_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+ .length = AIPS2_SIZE,
+ .type = MT_DEVICE_NONSHARED
},
};
{
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+
+#ifdef CONFIG_CACHE_L2X0
+static int mxc_init_l2x0(void)
+{
+ void __iomem *l2x0_base;
+
+ l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
+ if (IS_ERR(l2x0_base)) {
+ printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+ PTR_ERR(l2x0_base));
+ return 0;
+ }
+
+ l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+ return 0;
+}
+
+arch_initcall(mxc_init_l2x0);
+#endif
+
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
#include <linux/irq.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
#include "devices.h"
/*!
.flags = IMXUART_HAVE_RTSCTS,
};
+static int uart_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
static inline void mxc_init_imx_uart(void)
{
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+ mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
}
#else /* !SERIAL_IMX */
/*
* Configure INT line as GPIO input
*/
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
+ mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
}
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+/* This section defines setup for the Wolfson Microelectronics
+ * 1133-EV1 PMU/audio board. When other PMU boards are supported the
+ * regulator definitions may be shared with them, but for now they can
+ * only be used with this board so would generate warnings about
+ * unused statics and some of the configuration is specific to this
+ * module.
+ */
+
+/* CPU */
+static struct regulator_consumer_supply sw1a_consumers[] = {
+ {
+ .supply = "cpu_vcc",
+ }
+};
+
+static struct regulator_init_data sw1a_data = {
+ .constraints = {
+ .name = "SW1A",
+ .min_uV = 1275000,
+ .max_uV = 1600000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .state_mem = {
+ .uV = 1400000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
+ .consumer_supplies = sw1a_consumers,
+};
+
+/* System IO - High */
+static struct regulator_init_data viohi_data = {
+ .constraints = {
+ .name = "VIOHO",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .state_mem = {
+ .uV = 2800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* System IO - Low */
+static struct regulator_init_data violo_data = {
+ .constraints = {
+ .name = "VIOLO",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* DDR RAM */
+static struct regulator_init_data sw2a_data = {
+ .constraints = {
+ .name = "SW2A",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .state_disk = {
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 0,
+ },
+ .always_on = 1,
+ .boot_on = 1,
+ .initial_state = PM_SUSPEND_MEM,
+ },
+};
+
+static struct regulator_init_data ldo1_data = {
+ .constraints = {
+ .name = "VCAM/VMMC1/VMMC2",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_consumer_supply ldo2_consumers[] = {
+ {
+ .supply = "AVDD",
+ },
+ {
+ .supply = "HPVDD",
+ },
+};
+
+/* CODEC and SIM */
+static struct regulator_init_data ldo2_data = {
+ .constraints = {
+ .name = "VESIM/VSIM/AVDD",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+ .consumer_supplies = ldo2_consumers,
+};
+
+/* General */
+static struct regulator_init_data vdig_data = {
+ .constraints = {
+ .name = "VDIG",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* Tranceivers */
+static struct regulator_init_data ldo4_data = {
+ .constraints = {
+ .name = "VRF1/CVDD_2.775",
+ .min_uV = 2500000,
+ .max_uV = 2500000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+static struct wm8350_led_platform_data wm8350_led_data = {
+ .name = "wm8350:white",
+ .default_trigger = "heartbeat",
+ .max_uA = 27899,
+};
+
+static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
+ .vmid_discharge_msecs = 1000,
+ .drain_msecs = 30,
+ .cap_discharge_msecs = 700,
+ .vmid_charge_msecs = 700,
+ .vmid_s_curve = WM8350_S_CURVE_SLOW,
+ .dis_out4 = WM8350_DISCHARGE_SLOW,
+ .dis_out3 = WM8350_DISCHARGE_SLOW,
+ .dis_out2 = WM8350_DISCHARGE_SLOW,
+ .dis_out1 = WM8350_DISCHARGE_SLOW,
+ .vroi_out4 = WM8350_TIE_OFF_500R,
+ .vroi_out3 = WM8350_TIE_OFF_500R,
+ .vroi_out2 = WM8350_TIE_OFF_500R,
+ .vroi_out1 = WM8350_TIE_OFF_500R,
+ .vroi_enable = 0,
+ .codec_current_on = WM8350_CODEC_ISEL_1_0,
+ .codec_current_standby = WM8350_CODEC_ISEL_0_5,
+ .codec_current_charge = WM8350_CODEC_ISEL_1_5,
+};
+
+static int mx31_wm8350_init(struct wm8350 *wm8350)
+{
+ int i;
+
+ wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_ON);
+
+ wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_ON);
+
+ wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ /* Fix up for our own supplies. */
+ for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
+ ldo2_consumers[i].dev = wm8350->dev;
+
+ wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
+
+ /* LEDs */
+ wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
+ WM8350_DC5_ERRACT_SHUTDOWN_CONV);
+ wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
+ WM8350_ISINK_FLASH_DISABLE,
+ WM8350_ISINK_FLASH_TRIG_BIT,
+ WM8350_ISINK_FLASH_DUR_32MS,
+ WM8350_ISINK_FLASH_ON_INSTANT,
+ WM8350_ISINK_FLASH_OFF_INSTANT,
+ WM8350_ISINK_FLASH_MODE_EN);
+ wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
+ WM8350_ISINK_MODE_BOOST,
+ WM8350_ISINK_ILIM_NORMAL,
+ WM8350_DC5_RMP_20V,
+ WM8350_DC5_FBSRC_ISINKA);
+ wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
+ &wm8350_led_data);
+
+ wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+
+ return 0;
+}
+
+static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
+ .init = mx31_wm8350_init,
+};
+#endif
+
+#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
+static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+ {
+ I2C_BOARD_INFO("wm8350", 0x1a),
+ .platform_data = &mx31_wm8350_pdata,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ },
+#endif
+};
+
+static void mxc_init_i2c(void)
+{
+ i2c_register_board_info(1, mx31ads_i2c1_devices,
+ ARRAY_SIZE(mx31ads_i2c1_devices));
+
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
+
+ mxc_register_device(&mxc_i2c_device1, NULL);
+}
+#else
+static void mxc_init_i2c(void)
+{
+}
+#endif
+
/*!
* This structure defines static mappings for the i.MX31ADS board.
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
}, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
/*!
* Set up static virtual mappings.
*/
-void __init mx31ads_map_io(void)
+static void __init mx31ads_map_io(void)
{
mxc_map_io();
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
-void __init mx31ads_init_irq(void)
+static void __init mx31ads_init_irq(void)
{
mxc_init_irq();
mx31ads_init_expio();
{
mxc_init_extuart();
mxc_init_imx_uart();
+ mxc_init_i2c();
}
static void __init mx31ads_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
-struct sys_timer mx31ads_timer = {
+static struct sys_timer mx31ads_timer = {
.init = mx31ads_timer_init,
};
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
}, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
static void __init mx31lite_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
struct sys_timer mx31lite_timer = {
--- /dev/null
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mxc_uart1_pins[] = {
+ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+};
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_devboard_init(void)
+{
+ printk(KERN_INFO "Initializing mx31devboard peripherals\n");
+ mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_marxbot_init(void)
+{
+ printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+}
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/board-mx31moboard.h>
#include "devices.h"
&mx31moboard_flash,
};
+static int mxc_uart0_pins[] = {
+ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+};
+static int mxc_uart4_pins[] = {
+ MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+ MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+};
+
+static int mx31moboard_baseboard;
+core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
+
/*
* Board specific initialization.
*/
{
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+ mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_iomux_mode(MX31_PIN_CTS2__CTS2);
- mxc_iomux_mode(MX31_PIN_RTS2__RTS2);
- mxc_iomux_mode(MX31_PIN_TXD2__TXD2);
- mxc_iomux_mode(MX31_PIN_RXD2__RXD2);
-
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
- mxc_iomux_mode(MX31_PIN_PC_RST__CTS5);
- mxc_iomux_mode(MX31_PIN_PC_VS2__RTS5);
- mxc_iomux_mode(MX31_PIN_PC_BVD2__TXD5);
- mxc_iomux_mode(MX31_PIN_PC_BVD1__RXD5);
-
+ mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
mxc_register_device(&mxc_uart_device4, &uart_pdata);
-}
-/*
- * This structure defines static mappings for the mx31moboard.
- */
-static struct map_desc mx31moboard_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init mx31moboard_map_io(void)
-{
- mxc_map_io();
- iotable_init(mx31moboard_io_desc, ARRAY_SIZE(mx31moboard_io_desc));
+ switch (mx31moboard_baseboard) {
+ case MX31NOBOARD:
+ break;
+ case MX31DEVBOARD:
+ mx31moboard_devboard_init();
+ break;
+ case MX31MARXBOT:
+ mx31moboard_marxbot_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+ }
}
static void __init mx31moboard_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
struct sys_timer mx31moboard_timer = {
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31moboard_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31moboard_timer,
.flags = IMXUART_HAVE_RTSCTS,
};
-static inline void mxc_init_imx_uart(void)
-{
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-}
-
-/*!
- * This structure defines static mappings for the i.MX31PDK board.
- */
-static struct map_desc mx31pdk_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
+static int uart_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
};
-/*!
- * Set up static virtual mappings.
- */
-static void __init mx31pdk_map_io(void)
+static inline void mxc_init_imx_uart(void)
{
- mxc_map_io();
- iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+ mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
}
/*!
static void __init mx31pdk_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
static struct sys_timer mx31pdk_timer = {
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31pdk_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
#include <linux/gpio.h>
#include <linux/smc911x.h>
#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/iomux-mx3.h>
#include <mach/board-pcm037.h>
#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
#include "devices.h"
.hw_ecc = 1,
};
+#ifdef CONFIG_I2C_IMX
+static int i2c_1_pins[] = {
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+};
+
+static int pcm037_i2c_1_init(struct device *dev)
+{
+ return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
+ "i2c-1");
+}
+
+static void pcm037_i2c_1_exit(struct device *dev)
+{
+ mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
+}
+
+static struct imxi2c_platform_data pcm037_i2c_1_data = {
+ .bitrate = 100000,
+ .init = pcm037_i2c_1_init,
+ .exit = pcm037_i2c_1_exit,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm037_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563",
+ }
+};
+#endif
+
+static int sdhc1_pins[] = {
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+};
+
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+{
+ return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
+ "sdhc-1");
+}
+
+static void pcm970_sdhc1_exit(struct device *dev, void *data)
+{
+ mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+}
+
+/* No card and rw detection at the moment */
+static struct imxmmc_platform_data sdhc_pdata = {
+ .init = pcm970_sdhc1_init,
+ .exit = pcm970_sdhc1_exit,
+};
+
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_eth,
&pcm037_sram_device,
};
+static int uart0_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
+static int uart2_pins[] = {
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3
+};
+
/*
* Board specific initialization.
*/
{
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+ mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
- mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
-
+ mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
mxc_register_device(&mxc_uart_device2, &uart_pdata);
- mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
+ mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
/* SMSC9215 IRQ pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
- if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+ if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+ "pcm037-eth"))
gpio_direction_input(MX31_PIN_GPIO3_1);
- mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
-}
+#ifdef CONFIG_I2C_IMX
+ i2c_register_board_info(1, pcm037_i2c_devices,
+ ARRAY_SIZE(pcm037_i2c_devices));
-/*
- * This structure defines static mappings for the pcm037 board.
- */
-static struct map_desc pcm037_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init pcm037_map_io(void)
-{
- mxc_map_io();
- iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc));
+ mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
+#endif
+ mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+ mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
}
static void __init pcm037_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
struct sys_timer pcm037_timer = {
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = pcm037_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
--- /dev/null
+/*
+ * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <mach/board-qong.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/* FPGA defines */
+#define QONG_FPGA_VERSION(major, minor, rev) \
+ (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
+
+#define QONG_FPGA_BASEADDR CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE (1 << 24)
+
+#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
+#define QONG_FPGA_CTRL_SIZE 0x10
+/* FPGA control registers */
+#define QONG_FPGA_CTRL_VERSION 0x00
+
+#define QONG_DNET_ID 1
+#define QONG_DNET_BASEADDR \
+ (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
+#define QONG_DNET_SIZE 0x00001000
+
+#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int uart_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
+ "uart-0");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static struct resource dnet_resources[] = {
+ [0] = {
+ .name = "dnet-memory",
+ .start = QONG_DNET_BASEADDR,
+ .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = QONG_FPGA_IRQ,
+ .end = QONG_FPGA_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dnet_device = {
+ .name = "dnet",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dnet_resources),
+ .resource = dnet_resources,
+};
+
+static int __init qong_init_dnet(void)
+{
+ int ret;
+
+ ret = platform_device_register(&dnet_device);
+ return ret;
+}
+
+/* MTD NOR flash */
+
+static struct physmap_flash_data qong_flash_data = {
+ .width = 2,
+};
+
+static struct resource qong_flash_resource = {
+ .start = CS0_BASE_ADDR,
+ .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &qong_flash_data,
+ },
+ .resource = &qong_flash_resource,
+ .num_resources = 1,
+};
+
+static void qong_init_nor_mtd(void)
+{
+ (void)platform_device_register(&qong_nor_mtd_device);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
+ else
+ writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int qong_nand_device_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+}
+
+static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip >= 0)
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+ else
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
+}
+
+static struct platform_nand_data qong_nand_data = {
+ .chip = {
+ .chip_delay = 20,
+ .options = 0,
+ },
+ .ctrl = {
+ .cmd_ctrl = qong_nand_cmd_ctrl,
+ .dev_ready = qong_nand_device_ready,
+ .select_chip = qong_nand_select_chip,
+ }
+};
+
+static struct resource qong_nand_resource = {
+ .start = CS3_BASE_ADDR,
+ .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &qong_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &qong_nand_resource,
+};
+
+static void __init qong_init_nand_mtd(void)
+{
+ /* init CS */
+ __raw_writel(0x00004f00, CSCR_U(3));
+ __raw_writel(0x20013b31, CSCR_L(3));
+ __raw_writel(0x00020800, CSCR_A(3));
+ mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
+
+ /* enable pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+
+ /* ready/busy pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+
+ /* write protect pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
+
+ platform_device_register(&qong_nand_device);
+}
+
+static void __init qong_init_fpga(void)
+{
+ void __iomem *regs;
+ u32 fpga_ver;
+
+ regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
+ if (!regs) {
+ printk(KERN_ERR "%s: failed to map registers, aborting.\n",
+ __func__);
+ return;
+ }
+
+ fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
+ iounmap(regs);
+ printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
+ (fpga_ver & 0xF000) >> 12,
+ (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
+ if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
+ printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
+ "devices won't be registered!\n");
+ return;
+ }
+
+ /* register FPGA-based devices */
+ qong_init_nand_mtd();
+ qong_init_dnet();
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc qong_io_desc[] __initdata = {
+ {
+ .virtual = AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+ .length = AIPS1_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+ .length = AIPS2_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init qong_map_io(void)
+{
+ mxc_map_io();
+ iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_init_imx_uart();
+ qong_init_nor_mtd();
+ qong_init_fpga();
+}
+
+static void __init qong_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer qong_timer = {
+ .init = qong_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_QONG data structure.
+ */
+
+MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
+ /* Maintainer: DENX Software Engineering GmbH */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = qong_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &qong_timer,
+MACHINE_END
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
NETX_SYSTEM_RES_CR);
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
#ifdef CONFIG_PROCESSOR_NS9360
if (processor_is_ns9360())
select CPU_ARM926T
select ARCH_OMAP_OTG
+config ARCH_OMAP850
+ depends on ARCH_OMAP1
+ bool "OMAP850 Based System"
+ select CPU_ARM926T
+
config ARCH_OMAP15XX
depends on ARCH_OMAP1
default y
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
+config MACH_OMAP_HTCWIZARD
+ bool "HTC Wizard"
+ depends on ARCH_OMAP850
+ help
+ HTC Wizard smartphone support (AKA QTEK 9100, ...)
+
config MACH_OMAP_OSK
bool "TI OSK Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
config OMAP_ARM_195MHZ
bool "OMAP ARM 195 MHz CPU"
- depends on ARCH_OMAP1 && ARCH_OMAP730
+ depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 195MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_182MHZ
bool "OMAP ARM 182 MHz CPU"
- depends on ARCH_OMAP1 && ARCH_OMAP730
+ depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 182MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_168MHZ
bool "OMAP ARM 168 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+ depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 168MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_120MHZ
bool "OMAP ARM 120 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+ depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 120MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_60MHZ
bool "OMAP ARM 60 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+ depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
default y
help
Enable 60MHz clock for OMAP CPU. If unsure, say Y.
config OMAP_ARM_30MHZ
bool "OMAP ARM 30 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+ depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 30MHz clock for OMAP CPU. If unsure, say N.
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
{ OMAP_TAG_UART, &ams_delta_uart_config },
- { OMAP_TAG_USB, &ams_delta_usb_config },
};
static struct resource ams_delta_kp_resources[] = {
/* Clear latch2 (NAND, LCD, modem enable) */
ams_delta_latch2_write(~0, 0);
+ omap_usb_init(&ams_delta_usb_config);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
}
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/board.h>
-#include <mach/board-fsample.h>
+
+/* fsample is pretty close to p2-sample */
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE 0xE8100000
+#define FSAMPLE_CPLD_SIZE SZ_4K
+#define FSAMPLE_CPLD_START 0x05080000
+
+#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET 0
+#define FSAMPLE_CPLD_BIT_LCD_RESET 1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
+#define FSAMPLE_CPLD_BIT_OTG_RESET 9
+
+#define fsample_cpld_set(bit) \
+ fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+ fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
static int fsample_keymap[] = {
KEY(0,0,KEY_UP),
};
static struct omap_board_config_kernel generic_config[] __initdata = {
- { OMAP_TAG_USB, NULL },
{ OMAP_TAG_UART, &generic_uart_config },
};
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
- generic_config[0].data = &generic1510_usb_config;
+ omap_usb_init(&generic1510_usb_config);
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
if (!cpu_is_omap1510()) {
- generic_config[0].data = &generic1610_usb_config;
+ omap_usb_init(&generic1610_usb_config);
}
#endif
#include <mach/mmc.h>
#include <mach/gpio.h>
+#include "board-h2.h"
+
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
#include <mach/keypad.h>
#include <mach/common.h>
+#include "board-h2.h"
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START 0x04000300
+
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
};
static struct omap_board_config_kernel h2_config[] __initdata = {
- { OMAP_TAG_USB, &h2_usb_config },
{ OMAP_TAG_UART, &h2_uart_config },
{ OMAP_TAG_LCD, &h2_lcd_config },
};
omap_serial_init();
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
+ omap_usb_init(&h2_usb_config);
h2_mmc_init();
}
/*
- * arch/arm/plat-omap/include/mach/board-h2.h
+ * arch/arm/mach-omap1/board-h2.h
*
* Hardware definitions for TI OMAP1610 H2 board.
*
#ifndef __ASM_ARCH_OMAP_H2_H
#define __ASM_ARCH_OMAP_H2_H
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START 0x04000300
-
#define H2_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
# define H2_TPS_GPIO_MMC_PWR_EN (H2_TPS_GPIO_BASE + 3)
#include <mach/mmc.h>
#include <mach/gpio.h>
+#include "board-h3.h"
+
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
#include <mach/dma.h>
#include <mach/common.h>
+#include "board-h3.h"
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START 0x04000300
+
#define H3_TS_GPIO 48
static int h3_keymap[] = {
};
static struct omap_board_config_kernel h3_config[] __initdata = {
- { OMAP_TAG_USB, &h3_usb_config },
{ OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};
omap_serial_init();
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
+ omap_usb_init(&h3_usb_config);
h3_mmc_init();
}
/*
- * arch/arm/plat-omap/include/mach/board-h3.h
+ * arch/arm/mach-omap1/board-h3.h
*
* Copyright (C) 2001 RidgeRun, Inc.
* Copyright (C) 2004 Texas Instruments, Inc.
#ifndef __ASM_ARCH_OMAP_H3_H
#define __ASM_ARCH_OMAP_H3_H
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START 0x04000300
-
#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4)
#include <mach/common.h>
#include <mach/mmc.h>
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START 0x04000300
+
static int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(0, 3, KEY_DOWN),
};
static struct omap_board_config_kernel innovator_config[] = {
- { OMAP_TAG_USB, NULL },
{ OMAP_TAG_LCD, NULL },
{ OMAP_TAG_UART, &innovator_uart_config },
};
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
- innovator_config[0].data = &innovator1510_usb_config;
+ omap_usb_init(&innovator1510_usb_config);
innovator_config[1].data = &innovator1510_lcd_config;
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
- innovator_config[0].data = &h2_usb_config;
+ omap_usb_init(&h2_usb_config);
innovator_config[1].data = &innovator1610_lcd_config;
}
#endif
}
#endif
-static struct omap_board_config_kernel nokia770_config[] __initdata = {
- { OMAP_TAG_USB, NULL },
-};
-
#if defined(CONFIG_OMAP_DSP)
/*
* audio power control
static void __init omap_nokia770_init(void)
{
- nokia770_config[0].data = &nokia770_usb_config;
-
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
- omap_board_config = nokia770_config;
- omap_board_config_size = ARRAY_SIZE(nokia770_config);
omap_gpio_init();
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap_dsp_init();
ads7846_dev_init();
mipid_dev_init();
+ omap_usb_init(&nokia770_usb_config);
nokia770_mmc_init();
}
#include <mach/tc.h>
#include <mach/common.h>
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START 0x04800300
+
+/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
+# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
+# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
+# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
+# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
+# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
+
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
#endif
static struct omap_board_config_kernel osk_config[] __initdata = {
- { OMAP_TAG_USB, &osk_usb_config },
{ OMAP_TAG_UART, &osk_uart_config },
#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
l |= (3 << 1);
omap_writel(l, USB_TRANSCEIVER_CTRL);
+ omap_usb_init(&osk_usb_config);
+
/* irq for tps65010 chip */
/* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */
if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
#include <mach/keypad.h>
#include <mach/common.h>
+#define PALMTE_USBDETECT_GPIO 0
+#define PALMTE_USB_OR_DC_GPIO 1
+#define PALMTE_TSC_GPIO 4
+#define PALMTE_PINTDAV_GPIO 6
+#define PALMTE_MMC_WP_GPIO 8
+#define PALMTE_MMC_POWER_GPIO 9
+#define PALMTE_HDQ_GPIO 11
+#define PALMTE_HEADPHONES_GPIO 14
+#define PALMTE_SPEAKER_GPIO 15
+#define PALMTE_DC_GPIO OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
+
static void __init omap_palmte_init_irq(void)
{
omap1_init_common_hw();
#endif
static struct omap_board_config_kernel palmte_config[] __initdata = {
- { OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_LCD, &palmte_lcd_config },
{ OMAP_TAG_UART, &palmte_uart_config },
};
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
palmte_misc_gpio_setup();
omap_serial_init();
+ omap_usb_init(&palmte_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
}
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#define PALMTT_USBDETECT_GPIO 0
+#define PALMTT_CABLE_GPIO 1
+#define PALMTT_LED_GPIO 3
+#define PALMTT_PENIRQ_GPIO 6
+#define PALMTT_MMC_WP_GPIO 8
+#define PALMTT_HDQ_GPIO 11
+
static int palmtt_keymap[] = {
KEY(0, 0, KEY_ESC),
KEY(0, 1, KEY_SPACE),
};
static struct omap_board_config_kernel palmtt_config[] __initdata = {
- { OMAP_TAG_USB, &palmtt_usb_config },
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
};
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
+ omap_usb_init(&palmtt_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
}
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#define PALMZ71_USBDETECT_GPIO 0
+#define PALMZ71_PENIRQ_GPIO 6
+#define PALMZ71_MMC_WP_GPIO 8
+#define PALMZ71_HDQ_GPIO 11
+
+#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
+
static void __init
omap_palmz71_init_irq(void)
{
};
static struct omap_board_config_kernel palmz71_config[] __initdata = {
- {OMAP_TAG_USB, &palmz71_usb_config},
{OMAP_TAG_LCD, &palmz71_lcd_config},
{OMAP_TAG_UART, &palmz71_uart_config},
};
spi_register_board_info(palmz71_boardinfo,
ARRAY_SIZE(palmz71_boardinfo));
+ omap_usb_init(&palmz71_usb_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
palmz71_gpio_setup(0);
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/gpio.h>
+#include <mach/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
+#include <mach/board-sx1.h>
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
};
static struct omap_board_config_kernel sx1_config[] __initdata = {
- { OMAP_TAG_USB, &sx1_usb_config },
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
omap_board_config_size = ARRAY_SIZE(sx1_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
+ omap_usb_init(&sx1_usb_config);
sx1_mmc_init();
/* turn on USB power */
};
static struct omap_board_config_kernel voiceblue_config[] = {
- { OMAP_TAG_USB, &voiceblue_usb_config },
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
omap_board_config = voiceblue_config;
omap_board_config_size = ARRAY_SIZE(voiceblue_config);
omap_serial_init();
+ omap_usb_init(&voiceblue_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
/* There is a good chance board is going up, so enable power LED
#include <linux/io.h>
#include <asm/mach-types.h>
+#include <asm/clkdev.h>
#include <mach/cpu.h>
#include <mach/usb.h>
#include <mach/clock.h>
#include <mach/sram.h>
+static const struct clkops clkops_generic;
+static const struct clkops clkops_uart;
+static const struct clkops clkops_dspck;
+
#include "clock.h"
+static int clk_omap1_dummy_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static void clk_omap1_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clkops_dummy = {
+ .enable = clk_omap1_dummy_enable,
+ .disable = clk_omap1_dummy_disable,
+};
+
+static struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_dummy,
+ .flags = RATE_FIXED,
+};
+
+struct omap_clk {
+ u32 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+#define CK_310 (1 << 0)
+#define CK_730 (1 << 1)
+#define CK_1510 (1 << 2)
+#define CK_16XX (1 << 3)
+
+static struct omap_clk omap_clks[] = {
+ /* non-ULPD clocks */
+ CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
+ /* CK_GEN1 clocks */
+ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
+ CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
+ CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
+ CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
+ CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310),
+ CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX),
+ /* CK_GEN2 clocks */
+ CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
+ /* CK_GEN3 clocks */
+ CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730),
+ CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
+ CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX),
+ CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
+ CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
+ CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
+ CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
+ CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
+ CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
+ CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730),
+ CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
+ /* ULPD clocks */
+ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
+ CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX),
+ CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310),
+ CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX),
+ CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
+ CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
+ CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
+ CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
+ CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
+ CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
+ CLK(NULL, "bclk", &bclk_16xx, CK_16XX),
+ CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310),
+ CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX),
+ CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX),
+ /* Virtual clocks */
+ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
+ CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310),
+ CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
+ CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
+ CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX),
+ CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX),
+ CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
+ CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
+};
+
+static int omap1_clk_enable_generic(struct clk * clk);
+static int omap1_clk_enable(struct clk *clk);
+static void omap1_clk_disable_generic(struct clk * clk);
+static void omap1_clk_disable(struct clk *clk);
+
__u32 arm_idlect1_mask;
/*-------------------------------------------------------------------------
* Omap1 specific clock functions
*-------------------------------------------------------------------------*/
-static void omap1_watchdog_recalc(struct clk * clk)
+static unsigned long omap1_watchdog_recalc(struct clk *clk)
{
- clk->rate = clk->parent->rate / 14;
+ return clk->parent->rate / 14;
}
-static void omap1_uart_recalc(struct clk * clk)
+static unsigned long omap1_uart_recalc(struct clk *clk)
{
- unsigned int val = omap_readl(clk->enable_reg);
- if (val & clk->enable_bit)
- clk->rate = 48000000;
- else
- clk->rate = 12000000;
+ unsigned int val = __raw_readl(clk->enable_reg);
+ return val & clk->enable_bit ? 48000000 : 12000000;
}
-static void omap1_sossi_recalc(struct clk *clk)
+static unsigned long omap1_sossi_recalc(struct clk *clk)
{
u32 div = omap_readl(MOD_CONF_CTRL_1);
div = (div >> 17) & 0x7;
div++;
- clk->rate = clk->parent->rate / div;
+
+ return clk->parent->rate / div;
}
static int omap1_clk_enable_dsp_domain(struct clk *clk)
}
}
+static const struct clkops clkops_dspck = {
+ .enable = &omap1_clk_enable_dsp_domain,
+ .disable = &omap1_clk_disable_dsp_domain,
+};
+
static int omap1_clk_enable_uart_functional(struct clk *clk)
{
int ret;
omap1_clk_disable_generic(clk);
}
+static const struct clkops clkops_uart = {
+ .enable = &omap1_clk_enable_uart_functional,
+ .disable = &omap1_clk_disable_uart_functional,
+};
+
static void omap1_clk_allow_idle(struct clk *clk)
{
struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
struct clk * parent;
unsigned dsor_exp;
- if (unlikely(!(clk->flags & RATE_CKCTL)))
- return -EINVAL;
-
parent = clk->parent;
if (unlikely(parent == NULL))
return -EIO;
return dsor_exp;
}
-static void omap1_ckctl_recalc(struct clk * clk)
+static unsigned long omap1_ckctl_recalc(struct clk *clk)
{
- int dsor;
-
/* Calculate divisor encoded as 2-bit exponent */
- dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+ int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
- if (unlikely(clk->rate == clk->parent->rate / dsor))
- return; /* No change, quick exit */
- clk->rate = clk->parent->rate / dsor;
-
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+ return clk->parent->rate / dsor;
}
-static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
+static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
{
int dsor;
dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
omap1_clk_disable(&api_ck.clk);
- if (unlikely(clk->rate == clk->parent->rate / dsor))
- return; /* No change, quick exit */
- clk->rate = clk->parent->rate / dsor;
-
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+ return clk->parent->rate / dsor;
}
/* MPU virtual clock functions */
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
ck_dpll1.rate = ptr->pll_rate;
- propagate_rate(&ck_dpll1);
return 0;
}
static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
{
- int ret = -EINVAL;
- int dsor_exp;
- __u16 regval;
-
- if (clk->flags & RATE_CKCTL) {
- dsor_exp = calc_dsor_exp(clk, rate);
- if (dsor_exp > 3)
- dsor_exp = -EINVAL;
- if (dsor_exp < 0)
- return dsor_exp;
-
- regval = __raw_readw(DSP_CKCTL);
- regval &= ~(3 << clk->rate_offset);
- regval |= dsor_exp << clk->rate_offset;
- __raw_writew(regval, DSP_CKCTL);
- clk->rate = clk->parent->rate / (1 << dsor_exp);
- ret = 0;
- }
+ int dsor_exp;
+ u16 regval;
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
- propagate_rate(clk);
+ dsor_exp = calc_dsor_exp(clk, rate);
+ if (dsor_exp > 3)
+ dsor_exp = -EINVAL;
+ if (dsor_exp < 0)
+ return dsor_exp;
- return ret;
+ regval = __raw_readw(DSP_CKCTL);
+ regval &= ~(3 << clk->rate_offset);
+ regval |= dsor_exp << clk->rate_offset;
+ __raw_writew(regval, DSP_CKCTL);
+ clk->rate = clk->parent->rate / (1 << dsor_exp);
+
+ return 0;
+}
+
+static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+ int dsor_exp = calc_dsor_exp(clk, rate);
+ if (dsor_exp < 0)
+ return dsor_exp;
+ if (dsor_exp > 3)
+ dsor_exp = 3;
+ return clk->parent->rate / (1 << dsor_exp);
+}
+
+static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+ int dsor_exp;
+ u16 regval;
+
+ dsor_exp = calc_dsor_exp(clk, rate);
+ if (dsor_exp > 3)
+ dsor_exp = -EINVAL;
+ if (dsor_exp < 0)
+ return dsor_exp;
+
+ regval = omap_readw(ARM_CKCTL);
+ regval &= ~(3 << clk->rate_offset);
+ regval |= dsor_exp << clk->rate_offset;
+ regval = verify_ckctl_value(regval);
+ omap_writew(regval, ARM_CKCTL);
+ clk->rate = clk->parent->rate / (1 << dsor_exp);
+ return 0;
}
static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
{
unsigned int val;
- val = omap_readl(clk->enable_reg);
+ val = __raw_readl(clk->enable_reg);
if (rate == 12000000)
val &= ~(1 << clk->enable_bit);
else if (rate == 48000000)
val |= (1 << clk->enable_bit);
else
return -EINVAL;
- omap_writel(val, clk->enable_reg);
+ __raw_writel(val, clk->enable_reg);
clk->rate = rate;
return 0;
else
ratio_bits = (dsor - 2) << 2;
- ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
- omap_writew(ratio_bits, clk->enable_reg);
+ ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
+ __raw_writew(ratio_bits, clk->enable_reg);
return 0;
}
omap_writel(l, MOD_CONF_CTRL_1);
clk->rate = p_rate / (div + 1);
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
return 0;
}
__u16 ratio_bits;
/* Determine current rate and ensure clock is based on 96MHz APLL */
- ratio_bits = omap_readw(clk->enable_reg) & ~1;
- omap_writew(ratio_bits, clk->enable_reg);
+ ratio_bits = __raw_readw(clk->enable_reg) & ~1;
+ __raw_writew(ratio_bits, clk->enable_reg);
ratio_bits = (ratio_bits & 0xfc) >> 2;
if (ratio_bits > 6)
omap1_clk_deny_idle(clk->parent);
}
- ret = clk->enable(clk);
+ ret = clk->ops->enable(clk);
if (unlikely(ret != 0) && clk->parent) {
omap1_clk_disable(clk->parent);
static void omap1_clk_disable(struct clk *clk)
{
if (clk->usecount > 0 && !(--clk->usecount)) {
- clk->disable(clk);
+ clk->ops->disable(clk);
if (likely(clk->parent)) {
omap1_clk_disable(clk->parent);
if (clk->flags & CLOCK_NO_IDLE_PARENT)
__u16 regval16;
__u32 regval32;
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
if (unlikely(clk->enable_reg == NULL)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
clk->name);
}
if (clk->flags & ENABLE_REG_32BIT) {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval32 = __raw_readl(clk->enable_reg);
- regval32 |= (1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- } else {
- regval32 = omap_readl(clk->enable_reg);
- regval32 |= (1 << clk->enable_bit);
- omap_writel(regval32, clk->enable_reg);
- }
+ regval32 = __raw_readl(clk->enable_reg);
+ regval32 |= (1 << clk->enable_bit);
+ __raw_writel(regval32, clk->enable_reg);
} else {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval16 = __raw_readw(clk->enable_reg);
- regval16 |= (1 << clk->enable_bit);
- __raw_writew(regval16, clk->enable_reg);
- } else {
- regval16 = omap_readw(clk->enable_reg);
- regval16 |= (1 << clk->enable_bit);
- omap_writew(regval16, clk->enable_reg);
- }
+ regval16 = __raw_readw(clk->enable_reg);
+ regval16 |= (1 << clk->enable_bit);
+ __raw_writew(regval16, clk->enable_reg);
}
return 0;
return;
if (clk->flags & ENABLE_REG_32BIT) {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval32 = __raw_readl(clk->enable_reg);
- regval32 &= ~(1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- } else {
- regval32 = omap_readl(clk->enable_reg);
- regval32 &= ~(1 << clk->enable_bit);
- omap_writel(regval32, clk->enable_reg);
- }
+ regval32 = __raw_readl(clk->enable_reg);
+ regval32 &= ~(1 << clk->enable_bit);
+ __raw_writel(regval32, clk->enable_reg);
} else {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval16 = __raw_readw(clk->enable_reg);
- regval16 &= ~(1 << clk->enable_bit);
- __raw_writew(regval16, clk->enable_reg);
- } else {
- regval16 = omap_readw(clk->enable_reg);
- regval16 &= ~(1 << clk->enable_bit);
- omap_writew(regval16, clk->enable_reg);
- }
+ regval16 = __raw_readw(clk->enable_reg);
+ regval16 &= ~(1 << clk->enable_bit);
+ __raw_writew(regval16, clk->enable_reg);
}
}
+static const struct clkops clkops_generic = {
+ .enable = &omap1_clk_enable_generic,
+ .disable = &omap1_clk_disable_generic,
+};
+
static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
{
- int dsor_exp;
-
if (clk->flags & RATE_FIXED)
return clk->rate;
- if (clk->flags & RATE_CKCTL) {
- dsor_exp = calc_dsor_exp(clk, rate);
- if (dsor_exp < 0)
- return dsor_exp;
- if (dsor_exp > 3)
- dsor_exp = 3;
- return clk->parent->rate / (1 << dsor_exp);
- }
-
if (clk->round_rate != NULL)
return clk->round_rate(clk, rate);
static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret = -EINVAL;
- int dsor_exp;
- __u16 regval;
if (clk->set_rate)
ret = clk->set_rate(clk, rate);
- else if (clk->flags & RATE_CKCTL) {
- dsor_exp = calc_dsor_exp(clk, rate);
- if (dsor_exp > 3)
- dsor_exp = -EINVAL;
- if (dsor_exp < 0)
- return dsor_exp;
-
- regval = omap_readw(ARM_CKCTL);
- regval &= ~(3 << clk->rate_offset);
- regval |= dsor_exp << clk->rate_offset;
- regval = verify_ckctl_value(regval);
- omap_writew(regval, ARM_CKCTL);
- clk->rate = clk->parent->rate / (1 << dsor_exp);
- ret = 0;
- }
-
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
- propagate_rate(clk);
-
return ret;
}
}
/* Is the clock already disabled? */
- if (clk->flags & ENABLE_REG_32BIT) {
- if (clk->flags & VIRTUAL_IO_ADDRESS)
- regval32 = __raw_readl(clk->enable_reg);
- else
- regval32 = omap_readl(clk->enable_reg);
- } else {
- if (clk->flags & VIRTUAL_IO_ADDRESS)
- regval32 = __raw_readw(clk->enable_reg);
- else
- regval32 = omap_readw(clk->enable_reg);
- }
+ if (clk->flags & ENABLE_REG_32BIT)
+ regval32 = __raw_readl(clk->enable_reg);
+ else
+ regval32 = __raw_readw(clk->enable_reg);
if ((regval32 & (1 << clk->enable_bit)) == 0)
return;
}
printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
- clk->disable(clk);
+ clk->ops->disable(clk);
printk(" done\n");
}
int __init omap1_clk_init(void)
{
- struct clk ** clkp;
+ struct omap_clk *c;
const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
- u32 reg;
+ u32 reg, cpu_mask;
#ifdef CONFIG_DEBUG_LL
/* Resets some clocks that may be left on from bootloader,
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
- for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
- if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
- clk_register(*clkp);
- continue;
- }
-
- if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
- clk_register(*clkp);
- continue;
- }
-
- if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
- clk_register(*clkp);
- continue;
- }
+ for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+ clk_init_one(c->lk.clk);
- if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) {
- clk_register(*clkp);
- continue;
+ cpu_mask = 0;
+ if (cpu_is_omap16xx())
+ cpu_mask |= CK_16XX;
+ if (cpu_is_omap1510())
+ cpu_mask |= CK_1510;
+ if (cpu_is_omap730())
+ cpu_mask |= CK_730;
+ if (cpu_is_omap310())
+ cpu_mask |= CK_310;
+
+ for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+ if (c->cpu & cpu_mask) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
}
- }
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
if (info != NULL) {
}
}
}
- propagate_rate(&ck_dpll1);
#else
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
- propagate_rate(&ck_dpll1);
}
#endif
+ propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
return 0;
}
-
#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
-static int omap1_clk_enable_generic(struct clk * clk);
-static void omap1_clk_disable_generic(struct clk * clk);
-static void omap1_ckctl_recalc(struct clk * clk);
-static void omap1_watchdog_recalc(struct clk * clk);
+static unsigned long omap1_ckctl_recalc(struct clk *clk);
+static unsigned long omap1_watchdog_recalc(struct clk *clk);
static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-static void omap1_sossi_recalc(struct clk *clk);
-static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
-static int omap1_clk_enable_dsp_domain(struct clk * clk);
+static unsigned long omap1_sossi_recalc(struct clk *clk);
+static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
-static void omap1_clk_disable_dsp_domain(struct clk * clk);
static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
-static void omap1_uart_recalc(struct clk * clk);
-static int omap1_clk_enable_uart_functional(struct clk * clk);
-static void omap1_clk_disable_uart_functional(struct clk * clk);
+static unsigned long omap1_uart_recalc(struct clk *clk);
static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
static void omap1_init_ext_clk(struct clk * clk);
static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
-static int omap1_clk_enable(struct clk *clk);
-static void omap1_clk_disable(struct clk *clk);
+
+static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
struct mpu_rate {
unsigned long rate;
static struct clk ck_ref = {
.name = "ck_ref",
+ .ops = &clkops_null,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk ck_dpll1 = {
.name = "ck_dpll1",
+ .ops = &clkops_null,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct arm_idlect1_clk ck_dpll1out = {
.clk = {
.name = "ck_dpll1out",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
- ENABLE_REG_32BIT | RATE_PROPAGATES,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_CKOUT_ARM,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 12,
};
static struct clk sossi_ck = {
.name = "ck_sossi",
+ .ops = &clkops_generic,
.parent = &ck_dpll1out.clk,
- .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
- ENABLE_REG_32BIT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_1,
+ .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
.enable_bit = 16,
.recalc = &omap1_sossi_recalc,
.set_rate = &omap1_set_sossi_rate,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk arm_ck = {
.name = "arm_ck",
+ .ops = &clkops_null,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES |
- ALWAYS_ENABLED,
.rate_offset = CKCTL_ARMDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk armper_ck = {
.clk = {
.name = "armper_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_CKCTL |
- CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 2,
};
static struct clk arm_gpio_ck = {
.name = "arm_gpio_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_GPIOCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct arm_idlect1_clk armxor_ck = {
.clk = {
.name = "armxor_ck",
+ .ops = &clkops_generic,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 1,
};
static struct arm_idlect1_clk armtim_ck = {
.clk = {
.name = "armtim_ck",
+ .ops = &clkops_generic,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_TIMCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 9,
};
static struct arm_idlect1_clk armwdt_ck = {
.clk = {
.name = "armwdt_ck",
+ .ops = &clkops_generic,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_WDTCK,
.recalc = &omap1_watchdog_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 0,
};
static struct clk arminth_ck16xx = {
.name = "arminth_ck",
+ .ops = &clkops_null,
.parent = &arm_ck,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
/* Note: On 16xx the frequency can be divided by 2 by programming
* ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
*
* 1510 version is in TC clocks.
*/
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk dsp_ck = {
.name = "dsp_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL,
- .enable_reg = (void __iomem *)ARM_CKCTL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
.enable_bit = EN_DSPCK,
.rate_offset = CKCTL_DSPDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct clk dspmmu_ck = {
.name = "dspmmu_ck",
+ .ops = &clkops_null,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL | ALWAYS_ENABLED,
.rate_offset = CKCTL_DSPMMUDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct clk dspper_ck = {
.name = "dspper_ck",
+ .ops = &clkops_dspck,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL | VIRTUAL_IO_ADDRESS,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc_dsp_domain,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = &omap1_clk_set_rate_dsp_domain,
- .enable = &omap1_clk_enable_dsp_domain,
- .disable = &omap1_clk_disable_dsp_domain,
};
static struct clk dspxor_ck = {
.name = "dspxor_ck",
+ .ops = &clkops_dspck,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- VIRTUAL_IO_ADDRESS,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_dsp_domain,
- .disable = &omap1_clk_disable_dsp_domain,
};
static struct clk dsptim_ck = {
.name = "dsptim_ck",
+ .ops = &clkops_dspck,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- VIRTUAL_IO_ADDRESS,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_dsp_domain,
- .disable = &omap1_clk_disable_dsp_domain,
};
/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
static struct arm_idlect1_clk tc_ck = {
.clk = {
.name = "tc_ck",
+ .ops = &clkops_null,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
- RATE_CKCTL | RATE_PROPAGATES |
- ALWAYS_ENABLED | CLOCK_IDLE_CONTROL,
+ .flags = CLOCK_IDLE_CONTROL,
.rate_offset = CKCTL_TCDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 6,
};
static struct clk arminth_ck1510 = {
.name = "arminth_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- ALWAYS_ENABLED,
.recalc = &followparent_recalc,
/* Note: On 1510 the frequency follows TC_CK
*
* 16xx version is in MPU clocks.
*/
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
.name = "tipb_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk l3_ocpi_ck = {
/* No-idle controlled by "tc_ck" */
.name = "l3_ocpi_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)ARM_IDLECT3,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_OCPI_CK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk tc1_ck = {
.name = "tc1_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)ARM_IDLECT3,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC1_CK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk tc2_ck = {
.name = "tc2_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)ARM_IDLECT3,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC2_CK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk dma_ck = {
/* No-idle controlled by "tc_ck" */
.name = "dma_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk dma_lcdfree_ck = {
.name = "dma_lcdfree_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct arm_idlect1_clk api_ck = {
.clk = {
.name = "api_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_APICK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 8,
};
static struct arm_idlect1_clk lb_ck = {
.clk = {
.name = "lb_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LBCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 4,
};
static struct clk rhea1_ck = {
.name = "rhea1_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk rhea2_ck = {
.name = "rhea2_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk lcd_ck_16xx = {
.name = "lcd_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk lcd_ck_1510 = {
.clk = {
.name = "lcd_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- RATE_CKCTL | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 3,
};
static struct clk uart1_1510 = {
.name = "uart1_ck",
+ .ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- ENABLE_REG_32BIT | ALWAYS_ENABLED |
- CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct uart_clk uart1_16xx = {
.clk = {
.name = "uart1_ck",
+ .ops = &clkops_uart,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED |
- ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT |
+ CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29,
- .enable = &omap1_clk_enable_uart_functional,
- .disable = &omap1_clk_disable_uart_functional,
},
.sysc_addr = 0xfffb0054,
};
static struct clk uart2_ck = {
.name = "uart2_ck",
+ .ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
- ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 30, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk uart3_1510 = {
.name = "uart3_ck",
+ .ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- ENABLE_REG_32BIT | ALWAYS_ENABLED |
- CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct uart_clk uart3_16xx = {
.clk = {
.name = "uart3_ck",
+ .ops = &clkops_uart,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED |
- ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT |
+ CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31,
- .enable = &omap1_clk_enable_uart_functional,
- .disable = &omap1_clk_disable_uart_functional,
},
.sysc_addr = 0xfffb9854,
};
static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
.name = "usb_clko",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 6000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
.enable_bit = USB_MCLK_EN_BIT,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk usb_hhc_ck1510 = {
.name = "usb_hhc_ck",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = USB_HOST_HHC_UHOST_EN,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk usb_hhc_ck16xx = {
.name = "usb_hhc_ck",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
- .flags = CLOCK_IN_OMAP16XX |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
.enable_bit = 8 /* UHOST_EN */,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk usb_dc_ck = {
.name = "usb_dc_ck",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED,
- .enable_reg = (void __iomem *)SOFT_REQ_REG,
+ .flags = RATE_FIXED,
+ .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 4,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk mclk_1510 = {
.name = "mclk",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
- .enable_reg = (void __iomem *)SOFT_REQ_REG,
- .enable_bit = 6,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .flags = RATE_FIXED,
+ .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+ .enable_bit = 6,
};
static struct clk mclk_16xx = {
.name = "mclk",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL,
+ .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
.enable_bit = COM_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk bclk_1510 = {
.name = "bclk",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .flags = RATE_FIXED,
};
static struct clk bclk_16xx = {
.name = "bclk",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
+ .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
.enable_bit = SWD_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk mmc1_ck = {
.name = "mmc_ck",
+ .ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
- CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 23,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk mmc2_ck = {
.name = "mmc_ck",
.id = 1,
+ .ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX |
- RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 20,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk virtual_ck_mpu = {
.name = "mpu",
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+ .ops = &clkops_null,
.parent = &arm_ck, /* Is smarter alias for */
.recalc = &followparent_recalc,
.set_rate = &omap1_select_table_rate,
.round_rate = &omap1_round_to_table_rate,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
static struct clk i2c_fck = {
.name = "i2c_fck",
.id = 1,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
- ALWAYS_ENABLED,
+ .ops = &clkops_null,
+ .flags = CLOCK_NO_IDLE_PARENT,
.parent = &armxor_ck.clk,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk i2c_ick = {
.name = "i2c_ick",
.id = 1,
- .flags = CLOCK_IN_OMAP16XX |
- VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
- ALWAYS_ENABLED,
+ .ops = &clkops_null,
+ .flags = CLOCK_NO_IDLE_PARENT,
.parent = &armper_ck.clk,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
-};
-
-static struct clk * onchip_clks[] = {
- /* non-ULPD clocks */
- &ck_ref,
- &ck_dpll1,
- /* CK_GEN1 clocks */
- &ck_dpll1out.clk,
- &sossi_ck,
- &arm_ck,
- &armper_ck.clk,
- &arm_gpio_ck,
- &armxor_ck.clk,
- &armtim_ck.clk,
- &armwdt_ck.clk,
- &arminth_ck1510, &arminth_ck16xx,
- /* CK_GEN2 clocks */
- &dsp_ck,
- &dspmmu_ck,
- &dspper_ck,
- &dspxor_ck,
- &dsptim_ck,
- /* CK_GEN3 clocks */
- &tc_ck.clk,
- &tipb_ck,
- &l3_ocpi_ck,
- &tc1_ck,
- &tc2_ck,
- &dma_ck,
- &dma_lcdfree_ck,
- &api_ck.clk,
- &lb_ck.clk,
- &rhea1_ck,
- &rhea2_ck,
- &lcd_ck_16xx,
- &lcd_ck_1510.clk,
- /* ULPD clocks */
- &uart1_1510,
- &uart1_16xx.clk,
- &uart2_ck,
- &uart3_1510,
- &uart3_16xx.clk,
- &usb_clko,
- &usb_hhc_ck1510, &usb_hhc_ck16xx,
- &usb_dc_ck,
- &mclk_1510, &mclk_16xx,
- &bclk_1510, &bclk_16xx,
- &mmc1_ck,
- &mmc2_ck,
- /* Virtual clocks */
- &virtual_ck_mpu,
- &i2c_fck,
- &i2c_ick,
};
#endif
};
static struct platform_device mbox_device = {
- .name = "mailbox",
+ .name = "omap1-mailbox",
.id = -1,
.num_resources = ARRAY_SIZE(mbox_resources),
.resource = mbox_resources,
{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+ { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
omap_id = omap_readl(OMAP32_ID_1);
- /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+ /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */
if (((prod_id >> 20) == 0) || (prod_id == omap_id))
prod_id = 0;
else
switch (cpu_type) {
case 0x07:
+ case 0x08:
omap_revision |= 0x07;
break;
case 0x03:
};
#endif
+#ifdef CONFIG_ARCH_OMAP850
+static struct map_desc omap850_io_desc[] __initdata = {
+ {
+ .virtual = OMAP850_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP850_DSP_START),
+ .length = OMAP850_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP850_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP850_DSPREG_START),
+ .length = OMAP850_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
+};
+#endif
+
#ifdef CONFIG_ARCH_OMAP15XX
static struct map_desc omap1510_io_desc[] __initdata = {
{
iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
}
#endif
+
+#ifdef CONFIG_ARCH_OMAP850
+ if (cpu_is_omap850()) {
+ iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+ }
+#endif
+
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
};
#endif
+#ifdef CONFIG_ARCH_OMAP850
+static struct omap_irq_bank omap850_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
+ { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
+};
+#endif
+
#ifdef CONFIG_ARCH_OMAP15XX
static struct omap_irq_bank omap1510_irq_banks[] = {
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff },
irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
}
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ if (cpu_is_omap850()) {
+ irq_banks = omap850_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+ }
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
irq_banks = omap1510_irq_banks;
irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
/* Enable interrupts in global mask */
- if (cpu_is_omap730()) {
+ if (cpu_is_omap7xx())
irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
- }
/* Install the interrupt handlers for each bank */
for (i = 0; i < irq_bank_count; i++) {
if (cpu_is_omap730())
omap_unmask_irq(INT_730_IH2_IRQ);
+ else if (cpu_is_omap850())
+ omap_unmask_irq(INT_850_IH2_IRQ);
else if (cpu_is_omap15xx())
omap_unmask_irq(INT_1510_IH2_IRQ);
else if (cpu_is_omap16xx())
/*
* Mailbox reservation modules for DSP
*
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
* Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This file is subject to the terms and conditions of the GNU General Public
#define MAILBOX_DSP2ARM1_Flag 0x1c
#define MAILBOX_DSP2ARM2_Flag 0x20
-unsigned long mbox_base;
+static void __iomem *mbox_base;
struct omap_mbox1_fifo {
unsigned long cmd;
struct omap_mbox1_fifo rx_fifo;
};
-static inline int mbox_read_reg(unsigned int reg)
+static inline int mbox_read_reg(size_t ofs)
{
- return __raw_readw(mbox_base + reg);
+ return __raw_readw(mbox_base + ofs);
}
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
{
- __raw_writew(val, mbox_base + reg);
+ __raw_writew(val, mbox_base + ofs);
}
/* msg */
};
EXPORT_SYMBOL(mbox_dsp_info);
-static int __init omap1_mbox_probe(struct platform_device *pdev)
+static int __devinit omap1_mbox_probe(struct platform_device *pdev)
{
struct resource *res;
int ret = 0;
}
mbox_dsp_info.irq = res->start;
- ret = omap_mbox_register(&mbox_dsp_info);
-
- return ret;
+ return omap_mbox_register(&pdev->dev, &mbox_dsp_info);
}
-static int omap1_mbox_remove(struct platform_device *pdev)
+static int __devexit omap1_mbox_remove(struct platform_device *pdev)
{
omap_mbox_unregister(&mbox_dsp_info);
static struct platform_driver omap1_mbox_driver = {
.probe = omap1_mbox_probe,
- .remove = omap1_mbox_remove,
+ .remove = __devexit_p(omap1_mbox_remove),
.driver = {
- .name = "mailbox",
+ .name = "omap1-mailbox",
},
};
module_init(omap1_mbox_init);
module_exit(omap1_mbox_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_ALIAS("platform:omap1-mailbox");
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
-#endif
+static int dsp_use;
+static struct clk *api_clk;
+static struct clk *dsp_clk;
static void omap1_mcbsp_request(unsigned int id)
{
* are DSP public peripherals.
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
- omap_dsp_request_mem();
- /*
- * DSP external peripheral reset
- * FIXME: This should be moved to dsp code
- */
- __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
- DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+ if (dsp_use++ == 0) {
+ api_clk = clk_get(NULL, "api_clk");
+ dsp_clk = clk_get(NULL, "dsp_clk");
+ if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
+ clk_enable(api_clk);
+ clk_enable(dsp_clk);
+
+ omap_dsp_request_mem();
+ /*
+ * DSP external peripheral reset
+ * FIXME: This should be moved to dsp code
+ */
+ __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
+ DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+ }
+ }
}
}
static void omap1_mcbsp_free(unsigned int id)
{
- if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
- omap_dsp_release_mem();
+ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+ if (--dsp_use == 0) {
+ omap_dsp_release_mem();
+ if (!IS_ERR(api_clk)) {
+ clk_disable(api_clk);
+ clk_put(api_clk);
+ }
+ if (!IS_ERR(dsp_clk)) {
+ clk_disable(dsp_clk);
+ clk_put(dsp_clk);
+ }
+ }
+ }
}
static struct omap_mcbsp_ops omap1_mcbsp_ops = {
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 3,
},
{
.phys_base = OMAP1510_MCBSP2_BASE,
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 3,
},
};
#define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata)
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 3,
},
{
.phys_base = OMAP1610_MCBSP2_BASE,
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 3,
},
};
#define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata)
#define OMAP730_PINS_SZ 0
#endif /* CONFIG_ARCH_OMAP730 */
+#ifdef CONFIG_ARCH_OMAP850
+struct pin_config __initdata_or_module omap850_pins[] = {
+MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0)
+MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0)
+MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0)
+MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0)
+MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0)
+MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0)
+MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0)
+MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0)
+MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0)
+MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0)
+
+MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0)
+MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0)
+MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0)
+};
+#endif
+
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
static struct pin_config __initdata_or_module omap1xxx_pins[] = {
/*
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->pull_name, cfg->pull_reg, pull_orig, pull);
}
+
+#ifdef CONFIG_ARCH_OMAP850
+ omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
+#endif
+
#endif
#ifdef CONFIG_OMAP_MUX_ERRORS
serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
}
+ if (cpu_is_omap850()) {
+ serial_platform_data[0].regshift = 0;
+ serial_platform_data[1].regshift = 0;
+ serial_platform_data[0].irq = INT_850_UART_MODEM_1;
+ serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+ }
+
if (cpu_is_omap15xx()) {
serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
\ No newline at end of file
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_3430SDP
+ bool "OMAP 3430 SDP board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_NOKIA_RX51
+ bool "Nokia RX-51 board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
#
# Common support
-obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
clockdomain.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
+# SMS/SDRC
+obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
+# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
+
# Power Management
ifeq ($(CONFIG_PM),y)
obj-y += pm.o
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
+ mmc-twl4030.o
+obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
+ board-rx51-peripherals.o \
+# Platform specific device init code
+ifeq ($(CONFIG_USB_MUSB_SOC),y)
+obj-y += usb-musb.o
+endif
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
+#define SDP2430_CS0_BASE 0x04000000
#define SDP2430_FLASH_CS 0
#define SDP2430_SMC91X_CS 5
+#define SDP2430_ETHR_GPIO_IRQ 149
+
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+ .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
udelay(100);
- if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
+ if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- OMAP24XX_ETHR_GPIO_IRQ);
+ SDP2430_ETHR_GPIO_IRQ);
gpmc_cs_free(eth_cs);
goto out;
}
- gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
+ gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
out:
clk_disable(gpmc_fck);
static void __init omap_2430sdp_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
sdp2430_init_smc91x();
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap_serial_init();
twl4030_mmc_init(mmc);
+ usb_musb_init();
}
static void __init omap_2430sdp_map_io(void)
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/board-3430sdp.c
+ *
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+
+#include <mach/control.h>
+#include <mach/keypad.h>
+
+#include "mmc-twl4030.h"
+
+#define CONFIG_DISABLE_HFCLK 1
+
+#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29
+#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6
+#define SDP3430_SMC91X_CS 3
+
+#define SDP3430_TS_GPIO_IRQ_SDPV1 3
+#define SDP3430_TS_GPIO_IRQ_SDPV2 2
+
+#define ENABLE_VAUX3_DEDICATED 0x03
+#define ENABLE_VAUX3_DEV_GRP 0x20
+
+#define TWL4030_MSECURE_GPIO 22
+
+static struct resource sdp3430_smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct platform_device sdp3430_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources),
+ .resource = sdp3430_smc91x_resources,
+};
+
+static int sdp3430_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(0, 4, KEY_C),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(1, 4, KEY_G),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(2, 4, KEY_3),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P),
+ KEY(3, 4, KEY_Q),
+ KEY(4, 0, KEY_R),
+ KEY(4, 1, KEY_4),
+ KEY(4, 2, KEY_T),
+ KEY(4, 3, KEY_U),
+ KEY(4, 4, KEY_D),
+ KEY(5, 0, KEY_V),
+ KEY(5, 1, KEY_W),
+ KEY(5, 2, KEY_L),
+ KEY(5, 3, KEY_S),
+ KEY(5, 4, KEY_H),
+ 0
+};
+
+static struct twl4030_keypad_data sdp3430_kp_data = {
+ .rows = 5,
+ .cols = 6,
+ .keymap = sdp3430_keymap,
+ .keymapsize = ARRAY_SIZE(sdp3430_keymap),
+ .rep = 1,
+};
+
+static int ts_gpio; /* Needed for ads7846_get_pendown_state */
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ts_gpio);
+
+ omap_set_gpio_debounce(ts_gpio, 1);
+ omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
+ [0] = {
+ /*
+ * TSC2046 operates at a max freqency of 2MHz, so
+ * operate slightly below at 1.5MHz
+ */
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &tsc2046_mcspi_config,
+ .irq = 0,
+ .platform_data = &tsc2046_config,
+ },
+};
+
+static struct platform_device sdp3430_lcd_device = {
+ .name = "sdp2430_lcd",
+ .id = -1,
+};
+
+static struct regulator_consumer_supply sdp3430_vdac_supply = {
+ .supply = "vdac",
+ .dev = &sdp3430_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply sdp3430_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &sdp3430_lcd_device.dev,
+};
+
+static struct platform_device *sdp3430_devices[] __initdata = {
+ &sdp3430_smc91x_device,
+ &sdp3430_lcd_device,
+};
+
+static inline void __init sdp3430_init_smc91x(void)
+{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ int eth_gpio = 0;
+
+ eth_cs = SDP3430_SMC91X_CS;
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
+ sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
+ udelay(100);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
+ else
+ eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
+
+ sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
+
+ if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+ eth_gpio);
+ return;
+ }
+ gpio_direction_input(eth_gpio);
+}
+
+static void __init omap_3430sdp_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+ sdp3430_init_smc91x();
+}
+
+static struct omap_uart_config sdp3430_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config sdp3430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel sdp3430_config[] __initdata = {
+ { OMAP_TAG_UART, &sdp3430_uart_config },
+ { OMAP_TAG_LCD, &sdp3430_lcd_config },
+};
+
+static int sdp3430_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
+8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
+5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
+4040, 3910, 3790, 3670, 3550
+};
+
+static struct twl4030_bci_platform_data sdp3430_bci_data = {
+ .battery_tmp_tbl = sdp3430_batt_table,
+ .tblsize = ARRAY_SIZE(sdp3430_batt_table),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ /* 8 bits (default) requires S6.3 == ON,
+ * so the SIM card isn't used; else 4 bits.
+ */
+ .wires = 8,
+ .gpio_wp = 4,
+ },
+ {
+ .mmc = 2,
+ .wires = 8,
+ .gpio_wp = 7,
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply sdp3430_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
+static int sdp3430_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* gpio + 0 is "mmc0_cd" (input/IRQ),
+ * gpio + 1 is "mmc1_cd" (input/IRQ)
+ */
+ mmc[0].gpio_cd = gpio + 0;
+ mmc[1].gpio_cd = gpio + 1;
+ twl4030_mmc_init(mmc);
+
+ /* link regulators to MMC adapters ... we "know" the
+ * regulators will be set up only *after* we return.
+ */
+ sdp3430_vmmc1_supply.dev = mmc[0].dev;
+ sdp3430_vsim_supply.dev = mmc[0].dev;
+ sdp3430_vmmc2_supply.dev = mmc[1].dev;
+
+ /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
+ gpio_request(gpio + 7, "sub_lcd_en_bkl");
+ gpio_direction_output(gpio + 7, 0);
+
+ /* gpio + 15 is "sub_lcd_nRST" (output) */
+ gpio_request(gpio + 15, "sub_lcd_nRST");
+ gpio_direction_output(gpio + 15, 0);
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
+ | BIT(16) | BIT(17),
+ .setup = sdp3430_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data sdp3430_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_madc_platform_data sdp3430_madc_data = {
+ .irq_line = 1,
+};
+
+/*
+ * Apply all the fixed voltages since most versions of U-Boot
+ * don't bother with that initialization.
+ */
+
+/* VAUX1 for mainboard (irda and sub-lcd) */
+static struct regulator_init_data sdp3430_vaux1 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VAUX2 for camera module */
+static struct regulator_init_data sdp3430_vaux2 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VAUX3 for LCD board */
+static struct regulator_init_data sdp3430_vaux3 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VAUX4 for OMAP VDD_CSI2 (camera) */
+static struct regulator_init_data sdp3430_vaux4 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp3430_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data sdp3430_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 1850000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data sdp3430_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data sdp3430_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data sdp3430_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vdvi_supply,
+};
+
+static struct twl4030_platform_data sdp3430_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .bci = &sdp3430_bci_data,
+ .gpio = &sdp3430_gpio_data,
+ .madc = &sdp3430_madc_data,
+ .keypad = &sdp3430_kp_data,
+ .usb = &sdp3430_usb_data,
+
+ .vaux1 = &sdp3430_vaux1,
+ .vaux2 = &sdp3430_vaux2,
+ .vaux3 = &sdp3430_vaux3,
+ .vaux4 = &sdp3430_vaux4,
+ .vmmc1 = &sdp3430_vmmc1,
+ .vmmc2 = &sdp3430_vmmc2,
+ .vsim = &sdp3430_vsim,
+ .vdac = &sdp3430_vdac,
+ .vpll2 = &sdp3430_vpll2,
+};
+
+static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &sdp3430_twldata,
+ },
+};
+
+static int __init omap3430_i2c_init(void)
+{
+ /* i2c1 for PMIC only */
+ omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
+ ARRAY_SIZE(sdp3430_i2c_boardinfo));
+ /* i2c2 on camera connector (for sensor control) and optional isp1301 */
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ /* i2c3 on display connector (for DVI, tfp410) */
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static void __init omap_3430sdp_init(void)
+{
+ omap3430_i2c_init();
+ platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
+ omap_board_config = sdp3430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
+ else
+ ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
+ sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+ spi_register_board_info(sdp3430_spi_board_info,
+ ARRAY_SIZE(sdp3430_spi_board_info));
+ ads7846_dev_init();
+ omap_serial_init();
+ usb_musb_init();
+}
+
+static void __init omap_3430sdp_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
+ /* Maintainer: Syed Khasim - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_3430sdp_map_io,
+ .init_irq = omap_3430sdp_init_irq,
+ .init_machine = omap_3430sdp_init,
+ .timer = &omap_timer,
+MACHINE_END
#define APOLLON_FLASH_CS 0
#define APOLLON_ETH_CS 1
+#define APOLLON_ETHR_GPIO_IRQ 74
static struct mtd_partition apollon_partitions[] = {
{
static void __init omap_apollon_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
- { OMAP_TAG_USB, &apollon_usb_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
omap_cfg_reg(P21_242X_GPIO12);
gpio_request(12, "USB suspend");
gpio_direction_output(12, 0);
+ omap_usb_init(&apollon_usb_config);
}
static void __init omap_apollon_init(void)
static void __init omap_generic_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
}
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
+#define H4_ETHR_GPIO_IRQ 92
+
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
udelay(100);
omap_cfg_reg(M15_24XX_GPIO92);
- if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+ if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
gpmc_cs_free(eth_cs);
out:
static void __init omap_h4_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
.ctrl_name = "internal",
};
+static struct omap_usb_config h4_usb_config __initdata = {
+#ifdef CONFIG_MACH_OMAP2_H4_USB1
+ /* NOTE: usb1 could also be used with 3 wire signaling */
+ .pins[1] = 4,
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4_OTG
+ /* S1.10 ON -- USB OTG port
+ * usb0 switched to Mini-AB port and isp1301 transceiver;
+ * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
+ */
+ .otg = 1,
+ .pins[0] = 4,
+#ifdef CONFIG_USB_GADGET_OMAP
+ /* use OTG cable, or standard A-to-MiniB */
+ .hmc_mode = 0x14, /* 0:dev/otg 1:host 2:disable */
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* use OTG cable, or NONSTANDARD (B-to-MiniB) */
+ .hmc_mode = 0x11, /* 0:host 1:host 2:disable */
+#endif /* XX */
+
+#else
+ /* S1.10 OFF -- usb "download port"
+ * usb0 switched to Mini-B port and isp1105 transceiver;
+ * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
+ */
+ .register_dev = 1,
+ .pins[0] = 3,
+/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */
+ .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
+#endif
+};
+
static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
+ omap_usb_init(&h4_usb_config);
omap_serial_init();
}
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/board-ldp.h>
#include <mach/mcspi.h>
#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
-#include <asm/io.h>
#include <asm/delay.h>
#include <mach/control.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
-#define SDP3430_SMC91X_CS 3
+#define LDP_SMC911X_CS 1
+#define LDP_SMC911X_GPIO 152
+#define DEBUG_BASE 0x08000000
+#define LDP_ETHR_START DEBUG_BASE
static struct resource ldp_smc911x_resources[] = {
[0] = {
- .start = OMAP34XX_ETHR_START,
- .end = OMAP34XX_ETHR_START + SZ_4K,
+ .start = LDP_ETHR_START,
+ .end = LDP_ETHR_START + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
static void __init omap_ldp_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smc911x();
omap_board_config_size = ARRAY_SIZE(ldp_config);
omap_serial_init();
twl4030_mmc_init(mmc);
+ usb_musb_init();
}
static void __init omap_ldp_map_io(void)
#include <mach/gpmc.h>
#include <mach/nand.h>
#include <mach/mux.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
{
omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
ARRAY_SIZE(beagle_i2c_boardinfo));
-#ifdef CONFIG_I2C2_OMAP_BEAGLE
- omap_register_i2c_bus(2, 400, NULL, 0);
-#endif
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
omap_register_i2c_bus(3, 100, NULL, 0);
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
}
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
+ usb_musb_init();
omap3beagle_flash_init();
}
#include <mach/gpio.h>
#include <mach/hardware.h>
#include <mach/mcspi.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
.gpio_cd = -EINVAL,
.gpio_wp = 127,
.ext_clock = 1,
+ .transceiver = true,
+ },
+ {
+ .mmc = 3,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
},
{} /* Terminator */
};
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
}
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap3pandora_ads7846_init();
+ usb_musb_init();
}
static void __init omap3pandora_map_io(void)
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/board-overo.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpio.h>
#include <mach/gpmc.h>
#include <mach/hardware.h>
#include <mach/nand.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
+#define OVERO_GPIO_BT_XGATE 15
+#define OVERO_GPIO_W2W_NRESET 16
+#define OVERO_GPIO_BT_NRESET 164
+#define OVERO_GPIO_USBH_CPEN 168
+#define OVERO_GPIO_USBH_NRESET 183
+
#define NAND_BLOCK_SIZE SZ_128K
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#include <mach/mcspi.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OVERO_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+ .platform_data = &ads7846_config,
+ }
+};
+
+static void __init overo_ads7846_init(void)
+{
+ if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+ (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) {
+ gpio_export(OVERO_GPIO_PENDOWN, 0);
+ } else {
+ printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
+ return;
+ }
+
+ spi_register_board_info(overo_spi_board_info,
+ ARRAY_SIZE(overo_spi_board_info));
+}
+
+#else
+static inline void __init overo_ads7846_init(void) { return; }
+#endif
+
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
static void __init overo_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
}
.wires = 4,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .transceiver = true,
},
{} /* Terminator */
};
omap_serial_init();
twl4030_mmc_init(mmc);
overo_flash_init();
+ usb_musb_init();
+ overo_ads7846_init();
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ *
+ * Copyright (C) 2008-2009 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+#include <mach/keypad.h>
+
+#include "mmc-twl4030.h"
+
+
+#define SMC91X_CS 1
+#define SMC91X_GPIO_IRQ 54
+#define SMC91X_GPIO_RESET 164
+#define SMC91X_GPIO_PWRDWN 86
+
+static struct resource rx51_smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device rx51_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rx51_smc91x_resources),
+ .resource = rx51_smc91x_resources,
+};
+
+static int rx51_keymap[] = {
+ KEY(0, 0, KEY_Q),
+ KEY(0, 1, KEY_W),
+ KEY(0, 2, KEY_E),
+ KEY(0, 3, KEY_R),
+ KEY(0, 4, KEY_T),
+ KEY(0, 5, KEY_Y),
+ KEY(0, 6, KEY_U),
+ KEY(0, 7, KEY_I),
+ KEY(1, 0, KEY_O),
+ KEY(1, 1, KEY_D),
+ KEY(1, 2, KEY_DOT),
+ KEY(1, 3, KEY_V),
+ KEY(1, 4, KEY_DOWN),
+ KEY(2, 0, KEY_P),
+ KEY(2, 1, KEY_F),
+ KEY(2, 2, KEY_UP),
+ KEY(2, 3, KEY_B),
+ KEY(2, 4, KEY_RIGHT),
+ KEY(3, 0, KEY_COMMA),
+ KEY(3, 1, KEY_G),
+ KEY(3, 2, KEY_ENTER),
+ KEY(3, 3, KEY_N),
+ KEY(4, 0, KEY_BACKSPACE),
+ KEY(4, 1, KEY_H),
+ KEY(4, 3, KEY_M),
+ KEY(4, 4, KEY_LEFTCTRL),
+ KEY(5, 1, KEY_J),
+ KEY(5, 2, KEY_Z),
+ KEY(5, 3, KEY_SPACE),
+ KEY(5, 4, KEY_LEFTSHIFT),
+ KEY(6, 0, KEY_A),
+ KEY(6, 1, KEY_K),
+ KEY(6, 2, KEY_X),
+ KEY(6, 3, KEY_SPACE),
+ KEY(6, 4, KEY_FN),
+ KEY(7, 0, KEY_S),
+ KEY(7, 1, KEY_L),
+ KEY(7, 2, KEY_C),
+ KEY(7, 3, KEY_LEFT),
+ KEY(0xff, 0, KEY_F6),
+ KEY(0xff, 1, KEY_F7),
+ KEY(0xff, 2, KEY_F8),
+ KEY(0xff, 4, KEY_F9),
+ KEY(0xff, 5, KEY_F10),
+};
+
+static struct twl4030_keypad_data rx51_kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = rx51_keymap,
+ .keymapsize = ARRAY_SIZE(rx51_keymap),
+ .rep = 1,
+};
+
+static struct platform_device *rx51_peripherals_devices[] = {
+ &rx51_smc91x_device,
+};
+
+/*
+ * Timings are taken from smsc-lan91c96-ms.pdf
+ */
+static int smc91x_init_gpmc(int cs)
+{
+ struct gpmc_timings t;
+ const int t2_r = 45; /* t2 in Figure 12.10 */
+ const int t2_w = 30; /* t2 in Figure 12.11 */
+ const int t3 = 15; /* t3 in Figure 12.10 */
+ const int t5_r = 0; /* t5 in Figure 12.10 */
+ const int t6_r = 45; /* t6 in Figure 12.10 */
+ const int t6_w = 0; /* t6 in Figure 12.11 */
+ const int t7_w = 15; /* t7 in Figure 12.11 */
+ const int t15 = 12; /* t15 in Figure 12.2 */
+ const int t20 = 185; /* t20 in Figure 12.2 */
+
+ memset(&t, 0, sizeof(t));
+
+ t.cs_on = t15;
+ t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */
+ t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */
+ t.adv_on = t3; /* Figure 12.10 */
+ t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */
+ t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */
+ t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */
+ t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */
+ t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */
+ t.we_on = t.we_off - t7_w; /* Figure 12.11 */
+ t.rd_cycle = t20; /* Figure 12.2 */
+ t.wr_cycle = t20; /* Figure 12.4 */
+ t.access = t3 + t2_r + t5_r; /* Figure 12.10 */
+ t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */
+
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
+
+ return gpmc_cs_set_timings(cs, &t);
+}
+
+static void __init rx51_init_smc91x(void)
+{
+ unsigned long cs_mem_base;
+ int ret;
+
+ omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+ omap_cfg_reg(G25_34XX_GPIO86_OUT);
+ omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+ if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
+ rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
+
+ smc91x_init_gpmc(SMC91X_CS);
+
+ if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
+ goto free1;
+
+ gpio_direction_input(SMC91X_GPIO_IRQ);
+ rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
+
+ ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
+ if (ret)
+ goto free2;
+ gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
+
+ ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
+ if (ret)
+ goto free3;
+ gpio_direction_output(SMC91X_GPIO_RESET, 0);
+ gpio_set_value(SMC91X_GPIO_RESET, 1);
+ msleep(100);
+ gpio_set_value(SMC91X_GPIO_RESET, 0);
+
+ return;
+
+free3:
+ gpio_free(SMC91X_GPIO_PWRDWN);
+free2:
+ gpio_free(SMC91X_GPIO_IRQ);
+free1:
+ gpmc_cs_free(SMC91X_CS);
+
+ printk(KERN_ERR "Could not initialize smc91x\n");
+}
+
+static struct twl4030_madc_platform_data rx51_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .name = "external",
+ .mmc = 1,
+ .wires = 4,
+ .cover_only = true,
+ .gpio_cd = 160,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .name = "internal",
+ .mmc = 2,
+ .wires = 8,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply rx51_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply rx51_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply rx51_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+static struct regulator_init_data rx51_vaux1 = {
+ .constraints = {
+ .name = "V28",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data rx51_vaux2 = {
+ .constraints = {
+ .name = "VCSI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VAUX3 - adds more power to VIO_18 rail */
+static struct regulator_init_data rx51_vaux3 = {
+ .constraints = {
+ .name = "VCAM_DIG_18",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data rx51_vaux4 = {
+ .constraints = {
+ .name = "VCAM_ANA_28",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data rx51_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vmmc1_supply,
+};
+
+static struct regulator_init_data rx51_vmmc2 = {
+ .constraints = {
+ .name = "VMMC2_30",
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vmmc2_supply,
+};
+
+static struct regulator_init_data rx51_vsim = {
+ .constraints = {
+ .name = "VMMC2_IO_18",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vsim_supply,
+};
+
+static struct regulator_init_data rx51_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
+{
+ /* FIXME this gpio setup is just a placeholder for now */
+ gpio_request(gpio + 6, "backlight_pwm");
+ gpio_direction_output(gpio + 6, 0);
+ gpio_request(gpio + 7, "speaker_en");
+ gpio_direction_output(gpio + 7, 1);
+
+ /* set up MMC adapters, linking their regulators to them */
+ twl4030_mmc_init(mmc);
+ rx51_vmmc1_supply.dev = mmc[0].dev;
+ rx51_vmmc2_supply.dev = mmc[1].dev;
+ rx51_vsim_supply.dev = mmc[1].dev;
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data rx51_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
+ | BIT(4) | BIT(5)
+ | BIT(8) | BIT(9) | BIT(10) | BIT(11)
+ | BIT(12) | BIT(13) | BIT(14) | BIT(15)
+ | BIT(16) | BIT(17) ,
+ .setup = rx51_twlgpio_setup,
+};
+
+static struct twl4030_platform_data rx51_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &rx51_gpio_data,
+ .keypad = &rx51_kp_data,
+ .madc = &rx51_madc_data,
+
+ .vaux1 = &rx51_vaux1,
+ .vaux2 = &rx51_vaux2,
+ .vaux3 = &rx51_vaux3,
+ .vaux4 = &rx51_vaux4,
+ .vmmc1 = &rx51_vmmc1,
+ .vmmc2 = &rx51_vmmc2,
+ .vsim = &rx51_vsim,
+ .vdac = &rx51_vdac,
+};
+
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
+ {
+ I2C_BOARD_INFO("twl5030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &rx51_twldata,
+ },
+};
+
+static int __init rx51_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+ ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+ omap_register_i2c_bus(2, 100, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+
+void __init rx51_peripherals_init(void)
+{
+ platform_add_devices(rx51_peripherals_devices,
+ ARRAY_SIZE(rx51_peripherals_devices));
+ rx51_i2c_init();
+ rx51_init_smc91x();
+}
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/board-rx51.c
+ *
+ * Copyright (C) 2007, 2008 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+#include <mach/usb.h>
+
+static struct omap_uart_config rx51_uart_config = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config rx51_lcd_config = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_fbmem_config rx51_fbmem0_config = {
+ .size = 752 * 1024,
+};
+
+static struct omap_fbmem_config rx51_fbmem1_config = {
+ .size = 752 * 1024,
+};
+
+static struct omap_fbmem_config rx51_fbmem2_config = {
+ .size = 752 * 1024,
+};
+
+static struct omap_board_config_kernel rx51_config[] = {
+ { OMAP_TAG_UART, &rx51_uart_config },
+ { OMAP_TAG_FBMEM, &rx51_fbmem0_config },
+ { OMAP_TAG_FBMEM, &rx51_fbmem1_config },
+ { OMAP_TAG_FBMEM, &rx51_fbmem2_config },
+ { OMAP_TAG_LCD, &rx51_lcd_config },
+};
+
+static void __init rx51_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+extern void __init rx51_peripherals_init(void);
+
+static void __init rx51_init(void)
+{
+ omap_board_config = rx51_config;
+ omap_board_config_size = ARRAY_SIZE(rx51_config);
+ omap_serial_init();
+ usb_musb_init();
+ rx51_peripherals_init();
+}
+
+static void __init rx51_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
+ /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = rx51_map_io,
+ .init_irq = rx51_init_irq,
+ .init_machine = rx51_init,
+ .timer = &omap_timer,
+MACHINE_END
#include <mach/clock.h>
#include <mach/clockdomain.h>
-#include <mach/sram.h>
#include <mach/cpu.h>
#include <asm/div64.h>
-#include "memory.h"
+#include <mach/sdrc.h>
#include "sdrc.h"
#include "clock.h"
#include "prm.h"
#define DPLL_MIN_DIVIDER 1
/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW (1 << 0)
+#define DPLL_MULT_UNDERFLOW -1
/*
* Scale factor to mitigate roundoff errors in DPLL rate rounding.
#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define DPLL_FINT_BAND1_MIN 750000
+#define DPLL_FINT_BAND1_MAX 2100000
+#define DPLL_FINT_BAND2_MIN 7500000
+#define DPLL_FINT_BAND2_MAX 21000000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW -1
+#define DPLL_FINT_INVALID -2
+
u8 cpu_mask;
/*-------------------------------------------------------------------------
* OMAP2/3 specific clock functions
*-------------------------------------------------------------------------*/
+/**
+ * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
+ * @clk: struct clk *
+ *
+ * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
+ * don't take effect until the VALID_CONFIG bit is written, write the
+ * VALID_CONFIG bit and wait for the write to complete. No return value.
+ */
+static void _omap2xxx_clk_commit(struct clk *clk)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ if (!(clk->flags & DELAYED_APP))
+ return;
+
+ prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
+ OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ /* OCP barrier */
+ prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+}
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk *clk, u8 n)
+{
+ struct dpll_data *dd;
+ long fint;
+ int ret = 0;
+
+ dd = clk->dpll_data;
+
+ /* DPLL divider must result in a valid jitter correction val */
+ fint = clk->parent->rate / (n + 1);
+ if (fint < DPLL_FINT_BAND1_MIN) {
+
+ pr_debug("rejecting n=%d due to Fint failure, "
+ "lowering max_divider\n", n);
+ dd->max_divider = n;
+ ret = DPLL_FINT_UNDERFLOW;
+
+ } else if (fint > DPLL_FINT_BAND1_MAX &&
+ fint < DPLL_FINT_BAND2_MIN) {
+
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
+
+ } else if (fint > DPLL_FINT_BAND2_MAX) {
+
+ pr_debug("rejecting n=%d due to Fint failure, "
+ "boosting min_divider\n", n);
+ dd->min_divider = n;
+ ret = DPLL_FINT_INVALID;
+
+ }
+
+ return ret;
+}
+
/**
* omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
* @clk: OMAP clock struct ptr to use
clk->name, clks->parent->name,
((clk->parent) ?
clk->parent->name : "NULL"));
- clk->parent = clks->parent;
+ clk_reparent(clk, clks->parent);
};
found = 1;
}
return;
}
-/* Returns the DPLL rate */
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
u32 omap2_get_dpll_rate(struct clk *clk)
{
long long dpll_clk;
- u32 dpll_mult, dpll_div, dpll;
+ u32 dpll_mult, dpll_div, v;
struct dpll_data *dd;
dd = clk->dpll_data;
- /* REVISIT: What do we return on error? */
if (!dd)
return 0;
- dpll = __raw_readl(dd->mult_div1_reg);
- dpll_mult = dpll & dd->mult_mask;
+ /* Return bypass rate if DPLL is bypassed */
+ v = __raw_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ if (cpu_is_omap24xx()) {
+ if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP2XXX_EN_DPLL_FRBYPASS)
+ return dd->clk_bypass->rate;
+ } else if (cpu_is_omap34xx()) {
+ if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP3XXX_EN_DPLL_FRBYPASS)
+ return dd->clk_bypass->rate;
+ }
+
+ v = __raw_readl(dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
dpll_mult >>= __ffs(dd->mult_mask);
- dpll_div = dpll & dd->div1_mask;
+ dpll_div = v & dd->div1_mask;
dpll_div >>= __ffs(dd->div1_mask);
- dpll_clk = (long long)clk->parent->rate * dpll_mult;
+ dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
do_div(dpll_clk, dpll_div + 1);
return dpll_clk;
* Used for clocks that have the same value as the parent clock,
* divided by some factor
*/
-void omap2_fixed_divisor_recalc(struct clk *clk)
+unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
{
WARN_ON(!clk->fixed_div);
- clk->rate = clk->parent->rate / clk->fixed_div;
-
- if (clk->flags & RATE_PROPAGATES)
- propagate_rate(clk);
+ return clk->parent->rate / clk->fixed_div;
}
/**
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
* 34xx reverses this, just to keep us on our toes
*/
- if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+ if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
ena = mask;
- } else if (cpu_mask & RATE_IN_343X) {
+ else if (cpu_mask & RATE_IN_343X)
ena = 0;
- }
/* Wait for lock */
while (((__raw_readl(reg) & mask) != ena) &&
* it and pull it into struct clk itself somehow.
*/
reg = clk->enable_reg;
- if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
- (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
- other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
- else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
- (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
- other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
- else
- return;
- /* REVISIT: What are the appropriate exclusions for 34XX? */
- /* No check for DSS or cam clocks */
- if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
- if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
- clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
- clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
- return;
- }
-
- /* REVISIT: What are the appropriate exclusions for 34XX? */
- /* OMAP3: ignore DSS-mod clocks */
- if (cpu_is_omap34xx() &&
- (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
- ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
- clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
- return;
+ /*
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
+ */
+ other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
/* Check if both functional and interface clocks
* are running. */
omap2_wait_clock_ready(st_reg, bit, clk->name);
}
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
- */
-int _omap2_clk_enable(struct clk *clk)
+static int omap2_dflt_clk_enable(struct clk *clk)
{
- u32 regval32;
-
- if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
- return 0;
-
- if (clk->enable)
- return clk->enable(clk);
+ u32 v;
if (unlikely(clk->enable_reg == NULL)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
return 0; /* REVISIT: -EINVAL */
}
- regval32 = __raw_readl(clk->enable_reg);
+ v = __raw_readl(clk->enable_reg);
if (clk->flags & INVERT_ENABLE)
- regval32 &= ~(1 << clk->enable_bit);
+ v &= ~(1 << clk->enable_bit);
else
- regval32 |= (1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- wmb();
-
- omap2_clk_wait_ready(clk);
+ v |= (1 << clk->enable_bit);
+ __raw_writel(v, clk->enable_reg);
+ v = __raw_readl(clk->enable_reg); /* OCP barrier */
return 0;
}
-/* Disables clock without considering parent dependencies or use count */
-void _omap2_clk_disable(struct clk *clk)
+static int omap2_dflt_clk_enable_wait(struct clk *clk)
{
- u32 regval32;
-
- if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
- return;
+ int ret;
- if (clk->disable) {
- clk->disable(clk);
- return;
+ if (!clk->enable_reg) {
+ printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+ clk->name);
+ return 0; /* REVISIT: -EINVAL */
}
- if (clk->enable_reg == NULL) {
+ ret = omap2_dflt_clk_enable(clk);
+ if (ret == 0)
+ omap2_clk_wait_ready(clk);
+ return ret;
+}
+
+static void omap2_dflt_clk_disable(struct clk *clk)
+{
+ u32 v;
+
+ if (!clk->enable_reg) {
/*
* 'Independent' here refers to a clock which is not
* controlled by its parent.
return;
}
- regval32 = __raw_readl(clk->enable_reg);
+ v = __raw_readl(clk->enable_reg);
if (clk->flags & INVERT_ENABLE)
- regval32 |= (1 << clk->enable_bit);
+ v |= (1 << clk->enable_bit);
else
- regval32 &= ~(1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- wmb();
+ v &= ~(1 << clk->enable_bit);
+ __raw_writel(v, clk->enable_reg);
+ /* No OCP barrier needed here since it is a disable operation */
+}
+
+const struct clkops clkops_omap2_dflt_wait = {
+ .enable = omap2_dflt_clk_enable_wait,
+ .disable = omap2_dflt_clk_disable,
+};
+
+const struct clkops clkops_omap2_dflt = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+};
+
+/* Enables clock without considering parent dependencies or use count
+ * REVISIT: Maybe change this to use clk->enable like on omap1?
+ */
+static int _omap2_clk_enable(struct clk *clk)
+{
+ return clk->ops->enable(clk);
+}
+
+/* Disables clock without considering parent dependencies or use count */
+static void _omap2_clk_disable(struct clk *clk)
+{
+ clk->ops->disable(clk);
}
void omap2_clk_disable(struct clk *clk)
{
if (clk->usecount > 0 && !(--clk->usecount)) {
_omap2_clk_disable(clk);
- if (likely((u32)clk->parent))
+ if (clk->parent)
omap2_clk_disable(clk->parent);
if (clk->clkdm)
omap2_clkdm_clk_disable(clk->clkdm, clk);
int ret = 0;
if (clk->usecount++ == 0) {
- if (likely((u32)clk->parent))
- ret = omap2_clk_enable(clk->parent);
-
- if (unlikely(ret != 0)) {
- clk->usecount--;
- return ret;
- }
-
if (clk->clkdm)
omap2_clkdm_clk_enable(clk->clkdm, clk);
- ret = _omap2_clk_enable(clk);
-
- if (unlikely(ret != 0)) {
- if (clk->clkdm)
- omap2_clkdm_clk_disable(clk->clkdm, clk);
+ if (clk->parent) {
+ ret = omap2_clk_enable(clk->parent);
+ if (ret)
+ goto err;
+ }
- if (clk->parent) {
+ ret = _omap2_clk_enable(clk);
+ if (ret) {
+ if (clk->parent)
omap2_clk_disable(clk->parent);
- clk->usecount--;
- }
+
+ goto err;
}
}
+ return ret;
+err:
+ if (clk->clkdm)
+ omap2_clkdm_clk_disable(clk->clkdm, clk);
+ clk->usecount--;
return ret;
}
* Used for clocks that are part of CLKSEL_xyz governed clocks.
* REVISIT: Maybe change to use clk->enable() functions like on omap1?
*/
-void omap2_clksel_recalc(struct clk *clk)
+unsigned long omap2_clksel_recalc(struct clk *clk)
{
+ unsigned long rate;
u32 div = 0;
pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
div = omap2_clksel_get_divisor(clk);
if (div == 0)
- return;
+ return clk->rate;
- if (unlikely(clk->rate == clk->parent->rate / div))
- return;
- clk->rate = clk->parent->rate / div;
+ rate = clk->parent->rate / div;
- pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
+ pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+ return rate;
}
/**
* the element associated with the supplied parent clock address.
* Returns a pointer to the struct clksel on success or NULL on error.
*/
-const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
- struct clk *src_clk)
+static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+ struct clk *src_clk)
{
const struct clksel *clks;
*new_div = 1;
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return ~0;
for (clkr = clks->rates; clkr->div; clkr++) {
/* Given a clock and a rate apply a clock specific rounding function */
long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
{
- if (clk->round_rate != NULL)
+ if (clk->round_rate)
return clk->round_rate(clk, rate);
if (clk->flags & RATE_FIXED)
const struct clksel_rate *clkr;
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
WARN_ON(div == 0);
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return ~0;
for (clkr = clks->rates; clkr->div; clkr++) {
return clkr->val;
}
-/**
- * omap2_get_clksel - find clksel register addr & field mask for a clk
- * @clk: struct clk to use
- * @field_mask: ptr to u32 to store the register field mask
- *
- * Returns the address of the clksel register upon success or NULL on error.
- */
-void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
-{
- if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL)))
- return NULL;
-
- *field_mask = clk->clksel_mask;
-
- return clk->clksel_reg;
-}
-
/**
* omap2_clksel_get_divisor - get current divider applied to parent clock.
* @clk: OMAP struct clk to use.
*/
u32 omap2_clksel_get_divisor(struct clk *clk)
{
- u32 field_mask, field_val;
- void __iomem *div_addr;
+ u32 v;
- div_addr = omap2_get_clksel(clk, &field_mask);
- if (div_addr == NULL)
+ if (!clk->clksel_mask)
return 0;
- field_val = __raw_readl(div_addr) & field_mask;
- field_val >>= __ffs(field_mask);
+ v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+ v >>= __ffs(clk->clksel_mask);
- return omap2_clksel_to_divisor(clk, field_val);
+ return omap2_clksel_to_divisor(clk, v);
}
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
{
- u32 field_mask, field_val, reg_val, validrate, new_div = 0;
- void __iomem *div_addr;
+ u32 v, field_val, validrate, new_div = 0;
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
+ if (!clk->clksel_mask)
return -EINVAL;
- div_addr = omap2_get_clksel(clk, &field_mask);
- if (div_addr == NULL)
+ validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ if (validrate != rate)
return -EINVAL;
field_val = omap2_divisor_to_clksel(clk, new_div);
if (field_val == ~0)
return -EINVAL;
- reg_val = __raw_readl(div_addr);
- reg_val &= ~field_mask;
- reg_val |= (field_val << __ffs(field_mask));
- __raw_writel(reg_val, div_addr);
- wmb();
+ v = __raw_readl(clk->clksel_reg);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ __raw_writel(v, clk->clksel_reg);
+ v = __raw_readl(clk->clksel_reg); /* OCP barrier */
clk->rate = clk->parent->rate / new_div;
- if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
- OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
- wmb();
- }
+ _omap2xxx_clk_commit(clk);
return 0;
}
return -EINVAL;
/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
- if (clk->set_rate != NULL)
+ if (clk->set_rate)
ret = clk->set_rate(clk, rate);
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
- propagate_rate(clk);
-
return ret;
}
/*
* Converts encoded control register address into a full address
- * On error, *src_addr will be returned as 0.
+ * On error, the return value (parent_div) will be 0.
*/
-static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
- struct clk *src_clk, u32 *field_mask,
- struct clk *clk, u32 *parent_div)
+static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
+ u32 *field_val)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
- *parent_div = 0;
- *src_addr = NULL;
-
clks = omap2_get_clksel_by_parent(clk, src_clk);
- if (clks == NULL)
+ if (!clks)
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
/* Should never happen. Add a clksel mask to the struct clk. */
WARN_ON(clk->clksel_mask == 0);
- *field_mask = clk->clksel_mask;
- *src_addr = clk->clksel_reg;
- *parent_div = clkr->div;
+ *field_val = clkr->val;
- return clkr->val;
+ return clkr->div;
}
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
{
- void __iomem *src_addr;
- u32 field_val, field_mask, reg_val, parent_div;
+ u32 field_val, v, parent_div;
- if (unlikely(clk->flags & CONFIG_PARTICIPANT))
+ if (clk->flags & CONFIG_PARTICIPANT)
return -EINVAL;
if (!clk->clksel)
return -EINVAL;
- field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
- &field_mask, clk, &parent_div);
- if (src_addr == NULL)
+ parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+ if (!parent_div)
return -EINVAL;
- if (clk->usecount > 0)
- omap2_clk_disable(clk);
-
/* Set new source value (previous dividers if any in effect) */
- reg_val = __raw_readl(src_addr) & ~field_mask;
- reg_val |= (field_val << __ffs(field_mask));
- __raw_writel(reg_val, src_addr);
- wmb();
-
- if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
- wmb();
- }
+ v = __raw_readl(clk->clksel_reg);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ __raw_writel(v, clk->clksel_reg);
+ v = __raw_readl(clk->clksel_reg); /* OCP barrier */
- clk->parent = new_parent;
+ _omap2xxx_clk_commit(clk);
- if (clk->usecount > 0)
- omap2_clk_enable(clk);
+ clk_reparent(clk, new_parent);
/* CLKSEL clocks follow their parents' rates, divided by a divisor */
clk->rate = new_parent->rate;
pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
clk->name, clk->parent->name, clk->rate);
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
-
return 0;
}
return 0;
}
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
{
unsigned long long num;
unsigned long target_rate,
unsigned long parent_rate)
{
- int flags = 0, carry = 0;
+ int r = 0, carry = 0;
/* Unscale m and round if necessary */
if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
if (*m < DPLL_MIN_MULTIPLIER) {
*m = DPLL_MIN_MULTIPLIER;
*new_rate = 0;
- flags = DPLL_MULT_UNDERFLOW;
+ r = DPLL_MULT_UNDERFLOW;
}
if (*new_rate == 0)
*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
- return flags;
+ return r;
}
/**
int m, n, r, e, scaled_max_m;
unsigned long scaled_rt_rp, new_rate;
int min_e = -1, min_e_m = -1, min_e_n = -1;
+ struct dpll_data *dd;
if (!clk || !clk->dpll_data)
return ~0;
+ dd = clk->dpll_data;
+
pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
"%ld\n", clk->name, target_rate);
- scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
- scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+ scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
- clk->dpll_data->last_rounded_rate = 0;
+ dd->last_rounded_rate = 0;
- for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+ for (n = dd->min_divider; n <= dd->max_divider; n++) {
+
+ /* Is the (input clk, divider) pair valid for the DPLL? */
+ r = _dpll_test_fint(clk, n);
+ if (r == DPLL_FINT_UNDERFLOW)
+ break;
+ else if (r == DPLL_FINT_INVALID)
+ continue;
/* Compute the scaled DPLL multiplier, based on the divider */
m = scaled_rt_rp * n;
/*
- * Since we're counting n down, a m overflow means we can
- * can immediately skip to the next n
+ * Since we're counting n up, a m overflow means we
+ * can bail out completely (since as n increases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
*/
if (m > scaled_max_m)
- continue;
+ break;
r = _dpll_test_mult(&m, n, &new_rate, target_rate,
- clk->parent->rate);
+ dd->clk_ref->rate);
+
+ /* m can't be set low enough for this n - try with a larger n */
+ if (r == DPLL_MULT_UNDERFLOW)
+ continue;
e = target_rate - new_rate;
pr_debug("clock: n = %d: m = %d: rate error is %d "
"(new_rate = %ld)\n", n, m, e, new_rate);
if (min_e == -1 ||
- min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+ min_e >= (int)(abs(e) - dd->rate_tolerance)) {
min_e = e;
min_e_m = m;
min_e_n = n;
pr_debug("clock: found new least error %d\n", min_e);
- }
- /*
- * Since we're counting n down, a m underflow means we
- * can bail out completely (since as n decreases in
- * the next iteration, there's no way that m can
- * increase beyond the current m)
- */
- if (r & DPLL_MULT_UNDERFLOW)
- break;
+ /* We found good settings -- bail out now */
+ if (min_e <= dd->rate_tolerance)
+ break;
+ }
}
if (min_e < 0) {
return ~0;
}
- clk->dpll_data->last_rounded_m = min_e_m;
- clk->dpll_data->last_rounded_n = min_e_n;
- clk->dpll_data->last_rounded_rate =
- _dpll_compute_new_rate(clk->parent->rate, min_e_m, min_e_n);
+ dd->last_rounded_m = min_e_m;
+ dd->last_rounded_n = min_e_n;
+ dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
+ min_e_m, min_e_n);
pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
min_e, min_e_m, min_e_n);
pr_debug("clock: final rate: %ld (target rate: %ld)\n",
- clk->dpll_data->last_rounded_rate, target_rate);
+ dd->last_rounded_rate, target_rate);
- return clk->dpll_data->last_rounded_rate;
+ return dd->last_rounded_rate;
}
/*-------------------------------------------------------------------------
return;
printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
- _omap2_clk_disable(clk);
+ if (cpu_is_omap34xx()) {
+ omap2_clk_enable(clk);
+ omap2_clk_disable(clk);
+ } else
+ _omap2_clk_disable(clk);
}
#endif
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
+#define CORE_CLK_SRC_32K 0x0
+#define CORE_CLK_SRC_DPLL 0x1
+#define CORE_CLK_SRC_DPLL_X2 0x2
+
+/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP2XXX_EN_DPLL_LPBYPASS 0x1
+#define OMAP2XXX_EN_DPLL_FRBYPASS 0x2
+#define OMAP2XXX_EN_DPLL_LOCKED 0x3
+
+/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP3XXX_EN_DPLL_LPBYPASS 0x5
+#define OMAP3XXX_EN_DPLL_FRBYPASS 0x6
+#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+
int omap2_clk_init(void);
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
-int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
#ifdef CONFIG_OMAP_RESET_CLOCKS
#define omap2_clk_disable_unused NULL
#endif
-void omap2_clksel_recalc(struct clk *clk);
+unsigned long omap2_clksel_recalc(struct clk *clk);
void omap2_init_clk_clkdm(struct clk *clk);
void omap2_init_clksel_parent(struct clk *clk);
u32 omap2_clksel_get_divisor(struct clk *clk);
u32 *new_div);
u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
-void omap2_fixed_divisor_recalc(struct clk *clk);
+unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
u32 omap2_get_dpll_rate(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
void omap2_clk_prepare_for_reboot(void);
+extern const struct clkops clkops_omap2_dflt_wait;
+extern const struct clkops clkops_omap2_dflt;
+
extern u8 cpu_mask;
/* clksel_rate data common to 24xx/343x */
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
+#include <asm/clkdev.h>
-#include "memory.h"
+#include <mach/sdrc.h>
#include "clock.h"
-#include "clock24xx.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
+static const struct clkops clkops_oscck;
+static const struct clkops clkops_fixed;
+
+#include "clock24xx.h"
+
+struct omap_clk {
+ u32 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+#define CK_243X (1 << 0)
+#define CK_242X (1 << 1)
+
+static struct omap_clk omap24xx_clks[] = {
+ /* external root sources */
+ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
+ CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
+ CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
+ /* internal analog sources */
+ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X),
+ CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X),
+ CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X),
+ /* internal prcm root sources */
+ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X),
+ CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X),
+ CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
+ CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
+ CLK(NULL, "emul_ck", &emul_ck, CK_242X),
+ /* mpu domain clocks */
+ CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X),
+ /* dsp domain clocks */
+ CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X),
+ CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
+ CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
+ CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
+ CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
+ CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+ /* GFX domain clocks */
+ CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X),
+ CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X),
+ CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X),
+ /* Modem domain clocks */
+ CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
+ CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
+ /* DSS domain clocks */
+ CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X),
+ CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X),
+ CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X),
+ CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X),
+ /* L3 domain clocks */
+ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
+ CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X),
+ /* L4 domain clocks */
+ CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X),
+ /* virtual meta-group clock */
+ CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+ /* general l4 interface ck, multi-parent functional clk */
+ CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
+ CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
+ CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
+ CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
+ CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
+ CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X),
+ CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
+ CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
+ CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X),
+ CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X),
+ CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X),
+ CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X),
+ CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X),
+ CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X),
+ CLK(NULL, "icr_ick", &icr_ick, CK_243X),
+ CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X),
+ CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X),
+ CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
+ CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
+ CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X),
+ CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X),
+ CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
+ CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
+ CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X),
+ CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X),
+ CLK(NULL, "eac_ick", &eac_ick, CK_242X),
+ CLK(NULL, "eac_fck", &eac_fck, CK_242X),
+ CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X),
+ CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X),
+ CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X),
+ CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
+ CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
+ CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X),
+ CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
+ CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
+ CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X),
+ CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X),
+ CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X),
+ CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
+ CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
+ CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
+ CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X),
+ CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X),
+ CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X),
+ CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
+ CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
+ CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
+ CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
+ CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
+ CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X),
+ CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
+ CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
+ CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
+ CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+};
+
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
#define EN_APLL_STOPPED 0
#define EN_APLL_LOCKED 3
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
-/* This actually returns the rate of core_ck, not dpll_ck. */
-static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual). This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
{
- long long dpll_clk;
- u8 amult;
+ long long core_clk;
+ u32 v;
+
+ core_clk = omap2_get_dpll_rate(clk);
- dpll_clk = omap2_get_dpll_rate(tclk);
+ v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+ v &= OMAP24XX_CORE_CLK_SRC_MASK;
- amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- amult &= OMAP24XX_CORE_CLK_SRC_MASK;
- dpll_clk *= amult;
+ if (v == CORE_CLK_SRC_32K)
+ core_clk = 32768;
+ else
+ core_clk *= v;
- return dpll_clk;
+ return core_clk;
}
static int omap2_enable_osc_ck(struct clk *clk)
OMAP24XX_PRCM_CLKSRC_CTRL);
}
+static const struct clkops clkops_oscck = {
+ .enable = &omap2_enable_osc_ck,
+ .disable = &omap2_disable_osc_ck,
+};
+
#ifdef OLD_CK
/* Recalculate SYST_CLK */
static void omap2_sys_clk_recalc(struct clk * clk)
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
}
+static const struct clkops clkops_fixed = {
+ .enable = &omap2_clk_fixed_enable,
+ .disable = &omap2_clk_fixed_disable,
+};
+
/*
* Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set.
*/
-long omap2_dpllcore_round_rate(unsigned long target_rate)
+static long omap2_dpllcore_round_rate(unsigned long target_rate)
{
u32 high, low, core_clk_src;
}
-static void omap2_dpllcore_recalc(struct clk *clk)
+static unsigned long omap2_dpllcore_recalc(struct clk *clk)
{
- clk->rate = omap2_get_dpll_rate_24xx(clk);
-
- propagate_rate(clk);
+ return omap2xxx_clk_get_core_rate(clk);
}
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
u32 bypass = 0;
struct prcm_config tmpset;
const struct dpll_data *dd;
- unsigned long flags;
- int ret = -EINVAL;
- local_irq_save(flags);
- cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
if ((rate == (cur_rate / 2)) && (mult == 2)) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
} else if (rate != cur_rate) {
valid_rate = omap2_dpllcore_round_rate(rate);
if (valid_rate != rate)
- goto dpll_exit;
+ return -EINVAL;
if (mult == 1)
low = curr_prcm_set->dpll_speed;
dd = clk->dpll_data;
if (!dd)
- goto dpll_exit;
+ return -EINVAL;
tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
bypass = 1;
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
+ /* For omap2xxx_sdrc_init_params() */
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
/* Force dll lock mode */
omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
bypass);
/* Errata: ret dll entry state */
- omap2_init_memory_params(omap2_dll_force_needed());
- omap2_reprogram_sdrc(done_rate, 0);
+ omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+ omap2xxx_sdrc_reprogram(done_rate, 0);
}
- omap2_dpllcore_recalc(&dpll_ck);
- ret = 0;
-dpll_exit:
- local_irq_restore(flags);
- return(ret);
+ return 0;
}
/**
*
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/
-static void omap2_table_mpu_recalc(struct clk *clk)
+static unsigned long omap2_table_mpu_recalc(struct clk *clk)
{
- clk->rate = curr_prcm_set->mpu_speed;
+ return curr_prcm_set->mpu_speed;
}
/*
}
curr_prcm_set = prcm;
- cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
if (prcm->dpll_speed == cur_rate / 2) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
} else if (prcm->dpll_speed == cur_rate * 2) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
} else if (prcm->dpll_speed != cur_rate) {
local_irq_save(flags);
/* Major subsystem dividers */
tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
- cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
+ cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+ CM_CLKSEL1);
+
if (cpu_is_omap2430())
cm_write_mod_reg(prcm->cm_clksel_mdm,
OMAP2430_MDM_MOD, CM_CLKSEL);
- /* x2 to enter init_mem */
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ /* x2 to enter omap2xxx_sdrc_init_params() */
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
bypass);
- omap2_init_memory_params(omap2_dll_force_needed());
- omap2_reprogram_sdrc(done_rate, 0);
+ omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+ omap2xxx_sdrc_reprogram(done_rate, 0);
local_irq_restore(flags);
}
- omap2_dpllcore_recalc(&dpll_ck);
return 0;
}
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ */
+static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ struct prcm_config *prcm;
+ int i = 0;
+
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck.rate)
+ continue;
+
+ /* don't put bypass rates in table */
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ continue;
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = prcm->mpu_speed / 1000;
+ i++;
+ }
+
+ if (i == 0) {
+ printk(KERN_WARNING "%s: failed to initialize frequency "
+ "table\n", __func__);
+ return;
+ }
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ *table = &freq_table[0];
+}
+#endif
+
static struct clk_functions omap2_clk_functions = {
.clk_enable = omap2_clk_enable,
.clk_disable = omap2_clk_disable,
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
+#ifdef CONFIG_CPU_FREQ
+ .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
+#endif
};
static u32 omap2_get_apll_clkin(void)
{
- u32 aplls, sclk = 0;
+ u32 aplls, srate = 0;
aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
aplls &= OMAP24XX_APLLS_CLKIN_MASK;
aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
if (aplls == APLLS_CLKIN_19_2MHZ)
- sclk = 19200000;
+ srate = 19200000;
else if (aplls == APLLS_CLKIN_13MHZ)
- sclk = 13000000;
+ srate = 13000000;
else if (aplls == APLLS_CLKIN_12MHZ)
- sclk = 12000000;
+ srate = 12000000;
- return sclk;
+ return srate;
}
static u32 omap2_get_sysclkdiv(void)
return div;
}
-static void omap2_osc_clk_recalc(struct clk *clk)
+static unsigned long omap2_osc_clk_recalc(struct clk *clk)
{
- clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
- propagate_rate(clk);
+ return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
}
-static void omap2_sys_clk_recalc(struct clk *clk)
+static unsigned long omap2_sys_clk_recalc(struct clk *clk)
{
- clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
- propagate_rate(clk);
+ return clk->parent->rate / omap2_get_sysclkdiv();
}
/*
if (!mpurate)
return -EINVAL;
- if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+ if (clk_set_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
recalculate_root_clocks();
int __init omap2_clk_init(void)
{
struct prcm_config *prcm;
- struct clk **clkp;
- u32 clkrate;
+ struct omap_clk *c;
+ u32 clkrate, cpu_mask;
if (cpu_is_omap242x())
cpu_mask = RATE_IN_242X;
clk_init(&omap2_clk_functions);
- omap2_osc_clk_recalc(&osc_ck);
- omap2_sys_clk_recalc(&sys_ck);
+ osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+ propagate_rate(&osc_ck);
+ sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
+ propagate_rate(&sys_ck);
- for (clkp = onchip_24xx_clks;
- clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
- clkp++) {
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ clk_init_one(c->lk.clk);
- if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
- clk_register(*clkp);
- continue;
- }
+ cpu_mask = 0;
+ if (cpu_is_omap2420())
+ cpu_mask |= CK_242X;
+ if (cpu_is_omap2430())
+ cpu_mask |= CK_243X;
- if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
- clk_register(*clkp);
- continue;
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ if (c->cpu & cpu_mask) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
}
- }
/* Check the MPU rate set by bootloader */
- clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
#include "cm-regbits-24xx.h"
#include "sdrc.h"
-static void omap2_table_mpu_recalc(struct clk *clk);
+static unsigned long omap2_table_mpu_recalc(struct clk *clk);
static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_osc_clk_recalc(struct clk *clk);
-static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_dpllcore_recalc(struct clk *clk);
-static int omap2_clk_fixed_enable(struct clk *clk);
-static void omap2_clk_fixed_disable(struct clk *clk);
-static int omap2_enable_osc_ck(struct clk *clk);
-static void omap2_disable_osc_ck(struct clk *clk);
+static unsigned long omap2_sys_clk_recalc(struct clk *clk);
+static unsigned long omap2_osc_clk_recalc(struct clk *clk);
+static unsigned long omap2_sys_clk_recalc(struct clk *clk);
+static unsigned long omap2_dpllcore_recalc(struct clk *clk);
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
/* Base external input clocks */
static struct clk func_32k_ck = {
.name = "func_32k_ck",
+ .ops = &clkops_null,
.rate = 32000,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
- .recalc = &propagate_rate,
};
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES,
+ .ops = &clkops_oscck,
.clkdm_name = "wkup_clkdm",
- .enable = &omap2_enable_osc_ck,
- .disable = &omap2_disable_osc_ck,
.recalc = &omap2_osc_clk_recalc,
};
/* Without modem likely 12MHz, with modem likely 13MHz */
static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
.name = "sys_ck", /* ~ ref_clk also */
+ .ops = &clkops_null,
.parent = &osc_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_sys_clk_recalc,
};
static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
.name = "alt_ck",
+ .ops = &clkops_null,
.rate = 54000000,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
- .recalc = &propagate_rate,
};
/*
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP24XX_DPLL_MULT_MASK,
.div1_mask = OMAP24XX_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+ .enable_mask = OMAP24XX_EN_DPLL_MASK,
.max_multiplier = 1024,
+ .min_divider = 1,
.max_divider = 16,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
*/
static struct clk dpll_ck = {
.name = "dpll_ck",
+ .ops = &clkops_null,
.parent = &sys_ck, /* Can be func_32k also */
.dpll_data = &dpll_dd,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_dpllcore_recalc,
.set_rate = &omap2_reprogram_dpllcore,
static struct clk apll96_ck = {
.name = "apll96_ck",
+ .ops = &clkops_fixed,
.parent = &sys_ck,
.rate = 96000000,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+ .flags = RATE_FIXED | ENABLE_ON_INIT,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
- .enable = &omap2_clk_fixed_enable,
- .disable = &omap2_clk_fixed_disable,
- .recalc = &propagate_rate,
};
static struct clk apll54_ck = {
.name = "apll54_ck",
+ .ops = &clkops_fixed,
.parent = &sys_ck,
.rate = 54000000,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+ .flags = RATE_FIXED | ENABLE_ON_INIT,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
- .enable = &omap2_clk_fixed_enable,
- .disable = &omap2_clk_fixed_disable,
- .recalc = &propagate_rate,
};
/*
static struct clk func_54m_ck = {
.name = "func_54m_ck",
+ .ops = &clkops_null,
.parent = &apll54_ck, /* can also be alt_clk */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
static struct clk core_ck = {
.name = "core_ck",
+ .ops = &clkops_null,
.parent = &dpll_ck, /* can also be 32k */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
/* The parent of this clock is not selectable on 2420. */
static struct clk func_96m_ck = {
.name = "func_96m_ck",
+ .ops = &clkops_null,
.parent = &apll96_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
static struct clk func_48m_ck = {
.name = "func_48m_ck",
+ .ops = &clkops_null,
.parent = &apll96_ck, /* 96M or Alt */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
static struct clk func_12m_ck = {
.name = "func_12m_ck",
+ .ops = &clkops_null,
.parent = &func_48m_ck,
.fixed_div = 4,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_fixed_divisor_recalc,
};
/* Secure timer, only available in secure mode */
static struct clk wdt1_osc_ck = {
.name = "ck_wdt1_osc",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &osc_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.recalc = &followparent_recalc,
};
static struct clk sys_clkout_src = {
.name = "sys_clkout_src",
+ .ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP24XX_CLKOUT_EN_SHIFT,
static struct clk sys_clkout = {
.name = "sys_clkout",
+ .ops = &clkops_null,
.parent = &sys_clkout_src,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP24XX_CLKOUT_DIV_MASK,
/* In 2430, new in 2420 ES2 */
static struct clk sys_clkout2_src = {
.name = "sys_clkout2_src",
+ .ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
- .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP2420_CLKOUT2_EN_SHIFT,
/* In 2430, new in 2420 ES2 */
static struct clk sys_clkout2 = {
.name = "sys_clkout2",
+ .ops = &clkops_null,
.parent = &sys_clkout2_src,
- .flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP2420_CLKOUT2_DIV_MASK,
static struct clk emul_ck = {
.name = "emul_ck",
+ .ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL,
.enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
static struct clk mpu_ck = { /* Control cpu */
.name = "mpu_ck",
+ .ops = &clkops_null,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | DELAYED_APP |
- CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "mpu_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
static struct clk dsp_fck = {
.name = "dsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
- CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "dsp_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
/* This clock does not exist as such in the TRM. */
static struct clk dsp_irate_ick = {
.name = "dsp_irate_ick",
+ .ops = &clkops_null,
.parent = &dsp_fck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
- CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK,
.clksel = dsp_irate_ick_clksel,
/* 2420 only */
static struct clk dsp_ick = {
.name = "dsp_ick", /* apparently ipi and isp */
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dsp_irate_ick,
- .flags = CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
.enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */
};
/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
static struct clk iva2_1_ick = {
.name = "iva2_1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dsp_irate_ick,
- .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
};
*/
static struct clk iva1_ifck = {
.name = "iva1_ifck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
- RATE_PROPAGATES | DELAYED_APP,
+ .flags = CONFIG_PARTICIPANT | DELAYED_APP,
.clkdm_name = "iva1_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_COP_SHIFT,
/* IVA1 mpu/int/i/f clocks are /2 of parent */
static struct clk iva1_mpu_int_ifck = {
.name = "iva1_mpu_int_ifck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &iva1_ifck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "iva1_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_MPU_SHIFT,
static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */
.name = "core_l3_ck",
+ .ops = &clkops_null,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | DELAYED_APP |
- CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "core_l3_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L3_MASK,
/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
static struct clk usb_l4_ick = { /* FS-USB interface clock */
.name = "usb_l4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
static struct clk l4_ck = { /* used both as an ick and fck */
.name = "l4_ck",
+ .ops = &clkops_null,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+ .flags = DELAYED_APP,
.clkdm_name = "core_l4_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L4_MASK,
static struct clk ssi_ssr_sst_fck = {
.name = "ssi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_SSI_SHIFT,
.set_rate = &omap2_clksel_set_rate
};
+/*
+ * Presumably this is the same as SSI_ICLK.
+ * TRM contradicts itself on what clockdomain SSI_ICLK is in
+ */
+static struct clk ssi_l4_ick = {
+ .name = "ssi_l4_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l4_ck,
+ .clkdm_name = "core_l4_clkdm",
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+ .enable_bit = OMAP24XX_EN_SSI_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
/*
* GFX clock domain
static struct clk gfx_3d_fck = {
.name = "gfx_3d_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_3D_SHIFT,
static struct clk gfx_2d_fck = {
.name = "gfx_2d_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_2D_SHIFT,
static struct clk gfx_ick = {
.name = "gfx_ick", /* From l3 */
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
static struct clk mdm_ick = { /* used both as a ick and fck */
.name = "mdm_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "mdm_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
static struct clk mdm_osc_ck = {
.name = "mdm_osc_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &osc_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "mdm_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
.enable_bit = OMAP2430_EN_OSC_SHIFT,
static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */
.name = "dss_ick",
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ck, /* really both l3 and l4 */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
static struct clk dss1_fck = {
.name = "dss1_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &core_ck, /* Core or sys */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
static struct clk dss2_fck = { /* Alt clk used in power management */
.name = "dss2_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &sys_ck, /* fixed at sys_ck or 48MHz */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS2_SHIFT,
static struct clk dss_54m_fck = { /* Alt clk used in power management */
.name = "dss_54m_fck", /* 54m tv clk */
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_54m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_TV_SHIFT,
static struct clk gpt1_ick = {
.name = "gpt1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
static struct clk gpt1_fck = {
.name = "gpt1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
static struct clk gpt2_ick = {
.name = "gpt2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT2_SHIFT,
static struct clk gpt2_fck = {
.name = "gpt2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT2_SHIFT,
static struct clk gpt3_ick = {
.name = "gpt3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT3_SHIFT,
static struct clk gpt3_fck = {
.name = "gpt3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT3_SHIFT,
static struct clk gpt4_ick = {
.name = "gpt4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT4_SHIFT,
static struct clk gpt4_fck = {
.name = "gpt4_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT4_SHIFT,
static struct clk gpt5_ick = {
.name = "gpt5_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT5_SHIFT,
static struct clk gpt5_fck = {
.name = "gpt5_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT5_SHIFT,
static struct clk gpt6_ick = {
.name = "gpt6_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT6_SHIFT,
static struct clk gpt6_fck = {
.name = "gpt6_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT6_SHIFT,
static struct clk gpt7_ick = {
.name = "gpt7_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT7_SHIFT,
.recalc = &followparent_recalc,
static struct clk gpt7_fck = {
.name = "gpt7_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT7_SHIFT,
static struct clk gpt8_ick = {
.name = "gpt8_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT8_SHIFT,
static struct clk gpt8_fck = {
.name = "gpt8_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT8_SHIFT,
static struct clk gpt9_ick = {
.name = "gpt9_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT9_SHIFT,
static struct clk gpt9_fck = {
.name = "gpt9_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT9_SHIFT,
static struct clk gpt10_ick = {
.name = "gpt10_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT10_SHIFT,
static struct clk gpt10_fck = {
.name = "gpt10_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT10_SHIFT,
static struct clk gpt11_ick = {
.name = "gpt11_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT11_SHIFT,
static struct clk gpt11_fck = {
.name = "gpt11_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT11_SHIFT,
static struct clk gpt12_ick = {
.name = "gpt12_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
static struct clk gpt12_fck = {
.name = "gpt12_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
static struct clk mcbsp1_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
static struct clk mcbsp1_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
static struct clk mcbsp2_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
static struct clk mcbsp2_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
static struct clk mcbsp3_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
static struct clk mcbsp3_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
static struct clk mcbsp4_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
static struct clk mcbsp4_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
static struct clk mcbsp5_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 5,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
static struct clk mcbsp5_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 5,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
static struct clk mcspi1_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
.recalc = &followparent_recalc,
static struct clk mcspi1_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
static struct clk mcspi2_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
static struct clk mcspi2_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
static struct clk mcspi3_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
static struct clk mcspi3_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
static struct clk uart1_ick = {
.name = "uart1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_UART1_SHIFT,
static struct clk uart1_fck = {
.name = "uart1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_UART1_SHIFT,
static struct clk uart2_ick = {
.name = "uart2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_UART2_SHIFT,
static struct clk uart2_fck = {
.name = "uart2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_UART2_SHIFT,
static struct clk uart3_ick = {
.name = "uart3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_UART3_SHIFT,
static struct clk uart3_fck = {
.name = "uart3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_UART3_SHIFT,
static struct clk gpios_ick = {
.name = "gpios_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
static struct clk gpios_fck = {
.name = "gpios_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
static struct clk mpu_wdt_ick = {
.name = "mpu_wdt_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
static struct clk mpu_wdt_fck = {
.name = "mpu_wdt_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
static struct clk sync_32k_ick = {
.name = "sync_32k_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
static struct clk wdt1_ick = {
.name = "wdt1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_WDT1_SHIFT,
static struct clk omapctrl_ick = {
.name = "omapctrl_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
static struct clk icr_ick = {
.name = "icr_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_EN_ICR_SHIFT,
static struct clk cam_ick = {
.name = "cam_ick",
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_CAM_SHIFT,
*/
static struct clk cam_fck = {
.name = "cam_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_CAM_SHIFT,
static struct clk mailboxes_ick = {
.name = "mailboxes_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
static struct clk wdt4_ick = {
.name = "wdt4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_WDT4_SHIFT,
static struct clk wdt4_fck = {
.name = "wdt4_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_WDT4_SHIFT,
static struct clk wdt3_ick = {
.name = "wdt3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_WDT3_SHIFT,
static struct clk wdt3_fck = {
.name = "wdt3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_WDT3_SHIFT,
static struct clk mspro_ick = {
.name = "mspro_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
static struct clk mspro_fck = {
.name = "mspro_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
static struct clk mmc_ick = {
.name = "mmc_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_MMC_SHIFT,
static struct clk mmc_fck = {
.name = "mmc_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_MMC_SHIFT,
static struct clk fac_ick = {
.name = "fac_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_FAC_SHIFT,
static struct clk fac_fck = {
.name = "fac_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_12m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_FAC_SHIFT,
static struct clk eac_ick = {
.name = "eac_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_EAC_SHIFT,
static struct clk eac_fck = {
.name = "eac_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_EAC_SHIFT,
static struct clk hdq_ick = {
.name = "hdq_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_HDQ_SHIFT,
static struct clk hdq_fck = {
.name = "hdq_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_12m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_HDQ_SHIFT,
static struct clk i2c2_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_I2C2_SHIFT,
static struct clk i2c2_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &func_12m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_I2C2_SHIFT,
static struct clk i2chs2_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_I2CHS2_SHIFT,
static struct clk i2c1_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_I2C1_SHIFT,
static struct clk i2c1_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_12m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_I2C1_SHIFT,
static struct clk i2chs1_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_I2CHS1_SHIFT,
static struct clk gpmc_fck = {
.name = "gpmc_fck",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sdma_fck = {
.name = "sdma_fck",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sdma_ick = {
.name = "sdma_ick",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk vlynq_ick = {
.name = "vlynq_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
static struct clk vlynq_fck = {
.name = "vlynq_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
static struct clk sdrc_ick = {
.name = "sdrc_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP2430_EN_SDRC_SHIFT,
static struct clk des_ick = {
.name = "des_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_DES_SHIFT,
static struct clk sha_ick = {
.name = "sha_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_SHA_SHIFT,
static struct clk rng_ick = {
.name = "rng_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_RNG_SHIFT,
static struct clk aes_ick = {
.name = "aes_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_AES_SHIFT,
static struct clk pka_ick = {
.name = "pka_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_PKA_SHIFT,
static struct clk usb_fck = {
.name = "usb_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
static struct clk usbhs_ick = {
.name = "usbhs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_USBHS_SHIFT,
static struct clk mmchs1_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
static struct clk mmchs1_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
static struct clk mmchs2_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
static struct clk mmchs2_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
.recalc = &followparent_recalc,
static struct clk gpio5_ick = {
.name = "gpio5_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_GPIO5_SHIFT,
static struct clk gpio5_fck = {
.name = "gpio5_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_GPIO5_SHIFT,
static struct clk mdm_intc_ick = {
.name = "mdm_intc_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MDM_INTC_SHIFT,
static struct clk mmchsdb1_fck = {
.name = "mmchsdb_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT,
static struct clk mmchsdb2_fck = {
.name = "mmchsdb_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT,
*/
static struct clk virt_prcm_set = {
.name = "virt_prcm_set",
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+ .ops = &clkops_null,
+ .flags = DELAYED_APP,
.parent = &mpu_ck, /* Indexed by mpu speed, no parent */
.recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */
.set_rate = &omap2_select_table_rate,
.round_rate = &omap2_round_to_table_rate,
};
-static struct clk *onchip_24xx_clks[] __initdata = {
- /* external root sources */
- &func_32k_ck,
- &osc_ck,
- &sys_ck,
- &alt_ck,
- /* internal analog sources */
- &dpll_ck,
- &apll96_ck,
- &apll54_ck,
- /* internal prcm root sources */
- &func_54m_ck,
- &core_ck,
- &func_96m_ck,
- &func_48m_ck,
- &func_12m_ck,
- &wdt1_osc_ck,
- &sys_clkout_src,
- &sys_clkout,
- &sys_clkout2_src,
- &sys_clkout2,
- &emul_ck,
- /* mpu domain clocks */
- &mpu_ck,
- /* dsp domain clocks */
- &dsp_fck,
- &dsp_irate_ick,
- &dsp_ick, /* 242x */
- &iva2_1_ick, /* 243x */
- &iva1_ifck, /* 242x */
- &iva1_mpu_int_ifck, /* 242x */
- /* GFX domain clocks */
- &gfx_3d_fck,
- &gfx_2d_fck,
- &gfx_ick,
- /* Modem domain clocks */
- &mdm_ick,
- &mdm_osc_ck,
- /* DSS domain clocks */
- &dss_ick,
- &dss1_fck,
- &dss2_fck,
- &dss_54m_fck,
- /* L3 domain clocks */
- &core_l3_ck,
- &ssi_ssr_sst_fck,
- &usb_l4_ick,
- /* L4 domain clocks */
- &l4_ck, /* used as both core_l4 and wu_l4 */
- /* virtual meta-group clock */
- &virt_prcm_set,
- /* general l4 interface ck, multi-parent functional clk */
- &gpt1_ick,
- &gpt1_fck,
- &gpt2_ick,
- &gpt2_fck,
- &gpt3_ick,
- &gpt3_fck,
- &gpt4_ick,
- &gpt4_fck,
- &gpt5_ick,
- &gpt5_fck,
- &gpt6_ick,
- &gpt6_fck,
- &gpt7_ick,
- &gpt7_fck,
- &gpt8_ick,
- &gpt8_fck,
- &gpt9_ick,
- &gpt9_fck,
- &gpt10_ick,
- &gpt10_fck,
- &gpt11_ick,
- &gpt11_fck,
- &gpt12_ick,
- &gpt12_fck,
- &mcbsp1_ick,
- &mcbsp1_fck,
- &mcbsp2_ick,
- &mcbsp2_fck,
- &mcbsp3_ick,
- &mcbsp3_fck,
- &mcbsp4_ick,
- &mcbsp4_fck,
- &mcbsp5_ick,
- &mcbsp5_fck,
- &mcspi1_ick,
- &mcspi1_fck,
- &mcspi2_ick,
- &mcspi2_fck,
- &mcspi3_ick,
- &mcspi3_fck,
- &uart1_ick,
- &uart1_fck,
- &uart2_ick,
- &uart2_fck,
- &uart3_ick,
- &uart3_fck,
- &gpios_ick,
- &gpios_fck,
- &mpu_wdt_ick,
- &mpu_wdt_fck,
- &sync_32k_ick,
- &wdt1_ick,
- &omapctrl_ick,
- &icr_ick,
- &cam_fck,
- &cam_ick,
- &mailboxes_ick,
- &wdt4_ick,
- &wdt4_fck,
- &wdt3_ick,
- &wdt3_fck,
- &mspro_ick,
- &mspro_fck,
- &mmc_ick,
- &mmc_fck,
- &fac_ick,
- &fac_fck,
- &eac_ick,
- &eac_fck,
- &hdq_ick,
- &hdq_fck,
- &i2c1_ick,
- &i2c1_fck,
- &i2chs1_fck,
- &i2c2_ick,
- &i2c2_fck,
- &i2chs2_fck,
- &gpmc_fck,
- &sdma_fck,
- &sdma_ick,
- &vlynq_ick,
- &vlynq_fck,
- &sdrc_ick,
- &des_ick,
- &sha_ick,
- &rng_ick,
- &aes_ick,
- &pka_ick,
- &usb_fck,
- &usbhs_ick,
- &mmchs1_ick,
- &mmchs1_fck,
- &mmchs2_ick,
- &mmchs2_fck,
- &gpio5_ick,
- &gpio5_fck,
- &mdm_intc_ick,
- &mmchsdb1_fck,
- &mmchsdb2_fck,
-};
-
#endif
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
+#include <asm/clkdev.h>
-#include "memory.h"
+#include <mach/sdrc.h>
#include "clock.h"
-#include "clock34xx.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
+static const struct clkops clkops_noncore_dpll_ops;
+
+#include "clock34xx.h"
+
+struct omap_clk {
+ u32 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+#define CK_343X (1 << 0)
+#define CK_3430ES1 (1 << 1)
+#define CK_3430ES2 (1 << 2)
+
+static struct omap_clk omap34xx_clks[] = {
+ CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X),
+ CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X),
+ CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X),
+ CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
+ CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
+ CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X),
+ CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
+ CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X),
+ CLK(NULL, "sys_ck", &sys_ck, CK_343X),
+ CLK(NULL, "sys_altclk", &sys_altclk, CK_343X),
+ CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X),
+ CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X),
+ CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X),
+ CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X),
+ CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
+ CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X),
+ CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X),
+ CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X),
+ CLK(NULL, "core_ck", &core_ck, CK_343X),
+ CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X),
+ CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X),
+ CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
+ CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X),
+ CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
+ CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+ CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X),
+ CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X),
+ CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
+ CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X),
+ CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X),
+ CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X),
+ CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X),
+ CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X),
+ CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X),
+ CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
+ CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X),
+ CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
+ CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X),
+ CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
+ CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X),
+ CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
+ CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X),
+ CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
+ CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+ CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2),
+ CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2),
+ CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X),
+ CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X),
+ CLK(NULL, "corex2_fck", &corex2_fck, CK_343X),
+ CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X),
+ CLK(NULL, "mpu_ck", &mpu_ck, CK_343X),
+ CLK(NULL, "arm_fck", &arm_fck, CK_343X),
+ CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+ CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X),
+ CLK(NULL, "iva2_ck", &iva2_ck, CK_343X),
+ CLK(NULL, "l3_ick", &l3_ick, CK_343X),
+ CLK(NULL, "l4_ick", &l4_ick, CK_343X),
+ CLK(NULL, "rm_ick", &rm_ick, CK_343X),
+ CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1),
+ CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1),
+ CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1),
+ CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1),
+ CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1),
+ CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2),
+ CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2),
+ CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X),
+ CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2),
+ CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2),
+ CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2),
+ CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X),
+ CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2),
+ CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X),
+ CLK(NULL, "mspro_fck", &mspro_fck, CK_343X),
+ CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X),
+ CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X),
+ CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X),
+ CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X),
+ CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X),
+ CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X),
+ CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X),
+ CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_343X),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_343X),
+ CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
+ CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X),
+ CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
+ CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
+ CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X),
+ CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
+ CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
+ CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
+ CLK(NULL, "pka_ick", &pka_ick, CK_343X),
+ CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X),
+ CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2),
+ CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2),
+ CLK(NULL, "icr_ick", &icr_ick, CK_343X),
+ CLK(NULL, "aes2_ick", &aes2_ick, CK_343X),
+ CLK(NULL, "sha12_ick", &sha12_ick, CK_343X),
+ CLK(NULL, "des2_ick", &des2_ick, CK_343X),
+ CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X),
+ CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X),
+ CLK(NULL, "mspro_ick", &mspro_ick, CK_343X),
+ CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X),
+ CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X),
+ CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X),
+ CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X),
+ CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X),
+ CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X),
+ CLK(NULL, "uart2_ick", &uart2_ick, CK_343X),
+ CLK(NULL, "uart1_ick", &uart1_ick, CK_343X),
+ CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X),
+ CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X),
+ CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X),
+ CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X),
+ CLK(NULL, "ssi_ick", &ssi_ick, CK_343X),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1),
+ CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X),
+ CLK(NULL, "aes1_ick", &aes1_ick, CK_343X),
+ CLK("omap_rng", "ick", &rng_ick, CK_343X),
+ CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
+ CLK(NULL, "des1_ick", &des1_ick, CK_343X),
+ CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
+ CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X),
+ CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X),
+ CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
+ CLK(NULL, "dss_ick", &dss_ick, CK_343X),
+ CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
+ CLK(NULL, "cam_ick", &cam_ick, CK_343X),
+ CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
+ CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
+ CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
+ CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2),
+ CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X),
+ CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X),
+ CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X),
+ CLK("omap_wdt", "fck", &wdt2_fck, CK_343X),
+ CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X),
+ CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2),
+ CLK("omap_wdt", "ick", &wdt2_ick, CK_343X),
+ CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X),
+ CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X),
+ CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
+ CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X),
+ CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X),
+ CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X),
+ CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_343X),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X),
+ CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
+ CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X),
+ CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X),
+ CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X),
+ CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X),
+ CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X),
+ CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X),
+ CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X),
+ CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X),
+ CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X),
+ CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X),
+ CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X),
+ CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X),
+ CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X),
+ CLK(NULL, "uart3_ick", &uart3_ick, CK_343X),
+ CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X),
+ CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X),
+ CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X),
+ CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X),
+ CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X),
+ CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X),
+ CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X),
+ CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X),
+ CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X),
+ CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X),
+ CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X),
+ CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X),
+ CLK(NULL, "emu_src_ck", &emu_src_ck, CK_343X),
+ CLK(NULL, "pclk_fck", &pclk_fck, CK_343X),
+ CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X),
+ CLK(NULL, "atclk_fck", &atclk_fck, CK_343X),
+ CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X),
+ CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X),
+ CLK(NULL, "sr1_fck", &sr1_fck, CK_343X),
+ CLK(NULL, "sr2_fck", &sr2_fck, CK_343X),
+ CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X),
+ CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X),
+ CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X),
+ CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X),
+};
+
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
#define DPLL_AUTOIDLE_DISABLE 0x0
#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
*
* Recalculate and propagate the DPLL rate.
*/
-static void omap3_dpll_recalc(struct clk *clk)
+static unsigned long omap3_dpll_recalc(struct clk *clk)
{
- clk->rate = omap2_get_dpll_rate(clk);
-
- propagate_rate(clk);
+ return omap2_get_dpll_rate(clk);
}
/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
const struct dpll_data *dd;
int i = 0;
int ret = -EINVAL;
- u32 idlest_mask;
dd = clk->dpll_data;
- state <<= dd->idlest_bit;
- idlest_mask = 1 << dd->idlest_bit;
+ state <<= __ffs(dd->idlest_mask);
- while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
+ while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
i < MAX_DPLL_WAIT_TRIES) {
i++;
udelay(1);
return ret;
}
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = clk->dpll_data->clk_ref->rate / (n + 1);
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
/*
ai = omap3_dpll_autoidle_read(clk);
+ omap3_dpll_deny_idle(clk);
+
_omap3_dpll_write_clken(clk, DPLL_LOCKED);
- if (ai) {
- /*
- * If no downstream clocks are enabled, CM_IDLEST bit
- * may never become active, so don't wait for DPLL to lock.
- */
- r = 0;
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
omap3_dpll_allow_idle(clk);
- } else {
- r = _omap3_wait_dpll_status(clk, 1);
- omap3_dpll_deny_idle(clk);
- };
return r;
}
/*
- * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
* @clk: pointer to a DPLL struct clk
*
* Instructs a non-CORE DPLL to enter low-power bypass mode. In
static int omap3_noncore_dpll_enable(struct clk *clk)
{
int r;
+ struct dpll_data *dd;
if (clk == &dpll3_ck)
return -EINVAL;
- if (clk->parent->rate == clk_get_rate(clk))
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk->rate == dd->clk_bypass->rate) {
+ WARN_ON(clk->parent != dd->clk_bypass);
r = _omap3_noncore_dpll_bypass(clk);
- else
+ } else {
+ WARN_ON(clk->parent != dd->clk_ref);
r = _omap3_noncore_dpll_lock(clk);
+ }
+ /* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
+ if (!r)
+ clk->rate = omap2_get_dpll_rate(clk);
return r;
}
_omap3_noncore_dpll_stop(clk);
}
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock.. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /* Set jitter correction */
+ v = __raw_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ __raw_writel(v, dd->control_reg);
+
+ /* Set DPLL multiplier, divider */
+ v = __raw_readl(dd->mult_div1_reg);
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= m << __ffs(dd->mult_mask);
+ v |= (n - 1) << __ffs(dd->div1_mask);
+ __raw_writel(v, dd->mult_div1_reg);
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Set the DPLL CLKOUT to the target rate. If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass. Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *new_parent = NULL;
+ u16 freqsel;
+ struct dpll_data *dd;
+ int ret;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (rate == omap2_get_dpll_rate(clk))
+ return 0;
+
+ /*
+ * Ensure both the bypass and ref clocks are enabled prior to
+ * doing anything; we need the bypass clock running to reprogram
+ * the DPLL.
+ */
+ omap2_clk_enable(dd->clk_bypass);
+ omap2_clk_enable(dd->clk_ref);
+
+ if (dd->clk_bypass->rate == rate &&
+ (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
+
+ ret = _omap3_noncore_dpll_bypass(clk);
+ if (!ret)
+ new_parent = dd->clk_bypass;
+ } else {
+ if (dd->last_rounded_rate != rate)
+ omap2_dpll_round_rate(clk, rate);
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ if (!freqsel)
+ WARN_ON(1);
+
+ pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+ clk->name, rate);
+
+ ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+ dd->last_rounded_n, freqsel);
+ if (!ret)
+ new_parent = dd->clk_ref;
+ }
+ if (!ret) {
+ /*
+ * Switch the parent clock in the heirarchy, and make sure
+ * that the new parent's usecount is correct. Note: we
+ * enable the new parent before disabling the old to avoid
+ * any unnecessary hardware disable->enable transitions.
+ */
+ if (clk->usecount) {
+ omap2_clk_enable(new_parent);
+ omap2_clk_disable(clk->parent);
+ }
+ clk_reparent(clk, new_parent);
+ clk->rate = rate;
+ }
+ omap2_clk_disable(dd->clk_ref);
+ omap2_clk_disable(dd->clk_bypass);
+
+ return 0;
+}
+
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (omap_rev() == OMAP3430_REV_ES1_0) {
+ printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+ "silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+ return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
+
+/*
+ * CORE DPLL (DPLL3) rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate. Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 new_div = 0;
+ unsigned long validrate, sdrcrate;
+ struct omap_sdrc_params *sp;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ if (clk != &dpll3_m2_ck)
+ return -EINVAL;
+
+ if (rate == clk->rate)
+ return 0;
+
+ validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ if (validrate != rate)
+ return -EINVAL;
+
+ sdrcrate = sdrc_ick.rate;
+ if (rate > clk->rate)
+ sdrcrate <<= ((rate / clk->rate) - 1);
+ else
+ sdrcrate >>= ((clk->rate / rate) - 1);
+
+ sp = omap2_sdrc_get_params(sdrcrate);
+ if (!sp)
+ return -EINVAL;
+
+ pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+ validrate);
+ pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
+ sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+
+ /* REVISIT: SRAM code doesn't support other M2 divisors yet */
+ WARN_ON(new_div != 1 && new_div != 2);
+
+ /* REVISIT: Add SDRC_MR changing to this code also */
+ omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
+ sp->actim_ctrlb, new_div);
+
+ return 0;
+}
+
+
+static const struct clkops clkops_noncore_dpll_ops = {
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+};
+
+/* DPLL autoidle read/set code */
+
+
/**
* omap3_dpll_autoidle_read - read a DPLL's autoidle bits
* @clk: struct clk * of the DPLL to read
* Using parent clock DPLL data, look up DPLL state. If locked, set our
* rate to the dpll_clk * 2; otherwise, just use dpll_clk.
*/
-static void omap3_clkoutx2_recalc(struct clk *clk)
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
{
const struct dpll_data *dd;
+ unsigned long rate;
u32 v;
struct clk *pclk;
dd = pclk->dpll_data;
- WARN_ON(!dd->control_reg || !dd->enable_mask);
+ WARN_ON(!dd->enable_mask);
v = __raw_readl(dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
- if (v != DPLL_LOCKED)
- clk->rate = clk->parent->rate;
+ if (v != OMAP3XXX_EN_DPLL_LOCKED)
+ rate = clk->parent->rate;
else
- clk->rate = clk->parent->rate * 2;
-
- if (clk->flags & RATE_PROPAGATES)
- propagate_rate(clk);
+ rate = clk->parent->rate * 2;
+ return rate;
}
/* Common clock code */
/* REVISIT: not yet ready for 343x */
#if 0
- if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+ if (clk_set_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
#endif
int __init omap2_clk_init(void)
{
/* struct prcm_config *prcm; */
- struct clk **clkp;
+ struct omap_clk *c;
/* u32 clkrate; */
u32 cpu_clkflg;
- /* REVISIT: Ultimately this will be used for multiboot */
-#if 0
- if (cpu_is_omap242x()) {
- cpu_mask = RATE_IN_242X;
- cpu_clkflg = CLOCK_IN_OMAP242X;
- clkp = onchip_24xx_clks;
- } else if (cpu_is_omap2430()) {
- cpu_mask = RATE_IN_243X;
- cpu_clkflg = CLOCK_IN_OMAP243X;
- clkp = onchip_24xx_clks;
- }
-#endif
if (cpu_is_omap34xx()) {
cpu_mask = RATE_IN_343X;
- cpu_clkflg = CLOCK_IN_OMAP343X;
- clkp = onchip_34xx_clks;
+ cpu_clkflg = CK_343X;
/*
* Update this if there are further clock changes between ES2
*/
if (omap_rev() == OMAP3430_REV_ES1_0) {
/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
- cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
+ cpu_clkflg |= CK_3430ES1;
} else {
cpu_mask |= RATE_IN_3430ES2;
- cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
+ cpu_clkflg |= CK_3430ES2;
}
}
clk_init(&omap2_clk_functions);
- for (clkp = onchip_34xx_clks;
- clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
- clkp++) {
- if ((*clkp)->flags & cpu_clkflg) {
- clk_register(*clkp);
- omap2_init_clk_clkdm(*clkp);
+ for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+ clk_init_one(c->lk.clk);
+
+ for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+ if (c->cpu & cpu_clkflg) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
+ omap2_init_clk_clkdm(c->lk.clk);
}
- }
/* REVISIT: Not yet ready for OMAP3 */
#if 0
#include "prm.h"
#include "prm-regbits-34xx.h"
-static void omap3_dpll_recalc(struct clk *clk);
-static void omap3_clkoutx2_recalc(struct clk *clk);
+static unsigned long omap3_dpll_recalc(struct clk *clk);
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
static void omap3_dpll_allow_idle(struct clk *clk);
static void omap3_dpll_deny_idle(struct clk *clk);
static u32 omap3_dpll_autoidle_read(struct clk *clk);
-static int omap3_noncore_dpll_enable(struct clk *clk);
-static void omap3_noncore_dpll_disable(struct clk *clk);
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
/* Maximum DPLL multiplier, divider values for OMAP3 */
#define OMAP3_MAX_DPLL_MULT 2048
* DPLL5 supplies other peripheral clocks (USBHOST, USIM).
*/
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
#define DPLL_LOW_POWER_STOP 0x1
#define DPLL_LOW_POWER_BYPASS 0x5
/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
static struct clk omap_32k_fck = {
.name = "omap_32k_fck",
+ .ops = &clkops_null,
.rate = 32768,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk secure_32k_fck = {
.name = "secure_32k_fck",
+ .ops = &clkops_null,
.rate = 32768,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
/* Virtual source clocks for osc_sys_ck */
static struct clk virt_12m_ck = {
.name = "virt_12m_ck",
+ .ops = &clkops_null,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_13m_ck = {
.name = "virt_13m_ck",
+ .ops = &clkops_null,
.rate = 13000000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_16_8m_ck = {
.name = "virt_16_8m_ck",
+ .ops = &clkops_null,
.rate = 16800000,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_19_2m_ck = {
.name = "virt_19_2m_ck",
+ .ops = &clkops_null,
.rate = 19200000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_26m_ck = {
.name = "virt_26m_ck",
+ .ops = &clkops_null,
.rate = 26000000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_38_4m_ck = {
.name = "virt_38_4m_ck",
+ .ops = &clkops_null,
.rate = 38400000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static const struct clksel_rate osc_sys_12m_rates[] = {
/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
static struct clk osc_sys_ck = {
.name = "osc_sys_ck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP3430_PRM_CLKSEL,
.clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK,
.clksel = osc_sys_clksel,
/* REVISIT: deal with autoextclkmode? */
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
+ .flags = RATE_FIXED,
.recalc = &omap2_clksel_recalc,
};
/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
static struct clk sys_ck = {
.name = "sys_ck",
+ .ops = &clkops_null,
.parent = &osc_sys_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP3430_PRM_CLKSRC_CTRL,
.clksel_mask = OMAP_SYSCLKDIV_MASK,
.clksel = sys_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.recalc = &omap2_clksel_recalc,
};
static struct clk sys_altclk = {
.name = "sys_altclk",
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .ops = &clkops_null,
};
/* Optional external clock input for some McBSPs */
static struct clk mcbsp_clks = {
.name = "mcbsp_clks",
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .ops = &clkops_null,
};
/* PRM EXTERNAL CLOCK OUTPUT */
static struct clk sys_clkout1 = {
.name = "sys_clkout1",
+ .ops = &clkops_omap2_dflt,
.parent = &osc_sys_ck,
.enable_reg = OMAP3430_PRM_CLKOUT_CTRL,
.enable_bit = OMAP3430_CLKOUT_EN_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
/* CM CLOCKS */
-static const struct clksel_rate dpll_bypass_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate dpll_locked_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 0 }
-};
-
static const struct clksel_rate div16_dpll_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 2, .val = 2, .flags = RATE_IN_343X },
.mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_MPU_DPLL_MULT_MASK,
.div1_mask = OMAP3430_MPU_DPLL_DIV_MASK,
+ .clk_bypass = &dpll1_fck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_MPU_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
.autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
.autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
- .idlest_bit = OMAP3430_ST_MPU_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_MPU_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll1_ck = {
.name = "dpll1_ck",
+ .ops = &clkops_null,
.parent = &sys_ck,
.dpll_data = &dpll1_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap3_dpll_recalc,
};
*/
static struct clk dpll1_x2_ck = {
.name = "dpll1_x2_ck",
+ .ops = &clkops_null,
.parent = &dpll1_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
*/
static struct clk dpll1_x2m2_ck = {
.name = "dpll1_x2m2_ck",
+ .ops = &clkops_null,
.parent = &dpll1_x2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
.clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
.clksel = div16_dpll1_x2m2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap2_clksel_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK,
.div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK,
+ .clk_bypass = &dpll2_fck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_IVA2_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
.autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
.autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
- .idlest_bit = OMAP3430_ST_IVA2_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll2_ck = {
.name = "dpll2_ck",
+ .ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll2_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
- .enable = &omap3_noncore_dpll_enable,
- .disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll2_clkdm",
.recalc = &omap3_dpll_recalc,
};
*/
static struct clk dpll2_m2_ck = {
.name = "dpll2_m2_ck",
+ .ops = &clkops_null,
.parent = &dpll2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
OMAP3430_CM_CLKSEL2_PLL),
.clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
.clksel = div16_dpll2_m2x2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll2_clkdm",
.recalc = &omap2_clksel_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP3430_CORE_DPLL_MULT_MASK,
.div1_mask = OMAP3430_CORE_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_CORE_DPLL_MASK,
.auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
.recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT,
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
.autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK,
+ .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+ .idlest_mask = OMAP3430_ST_CORE_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll3_ck = {
.name = "dpll3_ck",
+ .ops = &clkops_null,
.parent = &sys_ck,
.dpll_data = &dpll3_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.round_rate = &omap2_dpll_round_rate,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_dpll_recalc,
};
*/
static struct clk dpll3_x2_ck = {
.name = "dpll3_x2_ck",
+ .ops = &clkops_null,
.parent = &dpll3_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
{ .parent = NULL }
};
-/*
- * DPLL3 output M2
- * REVISIT: This DPLL output divider must be changed in SRAM, so until
- * that code is ready, this should remain a 'read-only' clksel clock.
- */
+/* DPLL3 output M2 - primary control point for CORE speed */
static struct clk dpll3_m2_ck = {
.name = "dpll3_m2_ck",
+ .ops = &clkops_null,
.parent = &dpll3_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
.clksel = div31_dpll3m2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll3_clkdm",
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap3_core_dpll_m2_set_rate,
.recalc = &omap2_clksel_recalc,
};
-static const struct clksel core_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk core_ck = {
.name = "core_ck",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = core_ck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
-};
-
-static const struct clksel dpll3_m2x2_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
+ .ops = &clkops_null,
+ .parent = &dpll3_m2_ck,
+ .recalc = &followparent_recalc,
};
static struct clk dpll3_m2x2_ck = {
.name = "dpll3_m2x2_ck",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = dpll3_m2x2_ck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
+ .ops = &clkops_null,
+ .parent = &dpll3_x2_ck,
+ .clkdm_name = "dpll3_clkdm",
+ .recalc = &followparent_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
/* This virtual clock is the source for dpll3_m3x2_ck */
static struct clk dpll3_m3_ck = {
.name = "dpll3_m3_ck",
+ .ops = &clkops_null,
.parent = &dpll3_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_DIV_DPLL3_MASK,
.clksel = div16_dpll3_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll3_m3x2_ck = {
.name = "dpll3_m3x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll3_m3_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel emu_core_alwon_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk emu_core_alwon_ck = {
.name = "emu_core_alwon_ck",
+ .ops = &clkops_null,
.parent = &dpll3_m3x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = emu_core_alwon_ck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
+ .clkdm_name = "dpll3_clkdm",
+ .recalc = &followparent_recalc,
};
/* DPLL4 */
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
.autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .idlest_bit = OMAP3430_ST_PERIPH_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll4_ck = {
.name = "dpll4_ck",
+ .ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll4_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
- .enable = &omap3_noncore_dpll_enable,
- .disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_dpll4_set_rate,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_dpll_recalc,
};
*/
static struct clk dpll4_x2_ck = {
.name = "dpll4_x2_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
/* This virtual clock is the source for dpll4_m2x2_ck */
static struct clk dpll4_m2_ck = {
.name = "dpll4_m2_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
.clksel_mask = OMAP3430_DIV_96M_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m2x2_ck = {
.name = "dpll4_m2x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m2_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_96M_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel omap_96m_alwon_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
+/*
+ * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
+ * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM:
+ * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
+ * CM_96K_(F)CLK.
+ */
static struct clk omap_96m_alwon_fck = {
.name = "omap_96m_alwon_fck",
+ .ops = &clkops_null,
.parent = &dpll4_m2x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = omap_96m_alwon_fck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
-static struct clk omap_96m_fck = {
- .name = "omap_96m_fck",
+static struct clk cm_96m_fck = {
+ .name = "cm_96m_fck",
+ .ops = &clkops_null,
.parent = &omap_96m_alwon_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
-static const struct clksel cm_96m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+static const struct clksel_rate omap_96m_dpll_rates[] = {
+ { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 0 }
+};
+
+static const struct clksel_rate omap_96m_sys_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 0 }
+};
+
+static const struct clksel omap_96m_fck_clksel[] = {
+ { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
+ { .parent = &sys_ck, .rates = omap_96m_sys_rates },
{ .parent = NULL }
};
-static struct clk cm_96m_fck = {
- .name = "cm_96m_fck",
- .parent = &dpll4_m2x2_ck,
+static struct clk omap_96m_fck = {
+ .name = "omap_96m_fck",
+ .ops = &clkops_null,
+ .parent = &sys_ck,
.init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = cm_96m_fck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+ .clksel_mask = OMAP3430_SOURCE_96M_MASK,
+ .clksel = omap_96m_fck_clksel,
.recalc = &omap2_clksel_recalc,
};
/* This virtual clock is the source for dpll4_m3x2_ck */
static struct clk dpll4_m3_ck = {
.name = "dpll4_m3_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_TV_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m3x2_ck = {
.name = "dpll4_m3x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m3_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_TV_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel virt_omap_54m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
-static struct clk virt_omap_54m_fck = {
- .name = "virt_omap_54m_fck",
- .parent = &dpll4_m3x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = virt_omap_54m_fck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
-};
-
static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 0 }
};
static const struct clksel omap_54m_clksel[] = {
- { .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+ { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
{ .parent = &sys_altclk, .rates = omap_54m_alt_rates },
{ .parent = NULL }
};
static struct clk omap_54m_fck = {
.name = "omap_54m_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP3430_SOURCE_54M,
+ .clksel_mask = OMAP3430_SOURCE_54M_MASK,
.clksel = omap_54m_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
-static const struct clksel_rate omap_48m_96md2_rates[] = {
+static const struct clksel_rate omap_48m_cm96m_rates[] = {
{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 0 }
};
};
static const struct clksel omap_48m_clksel[] = {
- { .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates },
+ { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
{ .parent = NULL }
};
static struct clk omap_48m_fck = {
.name = "omap_48m_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP3430_SOURCE_48M,
+ .clksel_mask = OMAP3430_SOURCE_48M_MASK,
.clksel = omap_48m_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
static struct clk omap_12m_fck = {
.name = "omap_12m_fck",
+ .ops = &clkops_null,
.parent = &omap_48m_fck,
.fixed_div = 4,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &omap2_fixed_divisor_recalc,
};
/* This virstual clock is the source for dpll4_m4x2_ck */
static struct clk dpll4_m4_ck = {
.name = "dpll4_m4_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_DSS1_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m4x2_ck = {
.name = "dpll4_m4x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m4_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
/* This virtual clock is the source for dpll4_m5x2_ck */
static struct clk dpll4_m5_ck = {
.name = "dpll4_m5_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_CAM_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m5x2_ck = {
.name = "dpll4_m5x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m5_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
/* This virtual clock is the source for dpll4_m6x2_ck */
static struct clk dpll4_m6_ck = {
.name = "dpll4_m6_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_DIV_DPLL4_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m6x2_ck = {
.name = "dpll4_m6x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m6_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
static struct clk emu_per_alwon_ck = {
.name = "emu_per_alwon_ck",
+ .ops = &clkops_null,
.parent = &dpll4_m6x2_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &followparent_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
.mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
.div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
.enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
.autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
- .idlest_bit = OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+ .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll5_ck = {
.name = "dpll5_ck",
+ .ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll5_dd,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
- .enable = &omap3_noncore_dpll_enable,
- .disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll5_clkdm",
.recalc = &omap3_dpll_recalc,
};
static struct clk dpll5_m2_ck = {
.name = "dpll5_m2_ck",
+ .ops = &clkops_null,
.parent = &dpll5_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
.clksel_mask = OMAP3430ES2_DIV_120M_MASK,
.clksel = div16_dpll5_clksel,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
-};
-
-static const struct clksel omap_120m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
-static struct clk omap_120m_fck = {
- .name = "omap_120m_fck",
- .parent = &dpll5_m2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
- .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
- .clksel = omap_120m_fck_clksel,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll5_clkdm",
.recalc = &omap2_clksel_recalc,
};
};
static const struct clksel clkout2_src_clksel[] = {
- { .parent = &core_ck, .rates = clkout2_src_core_rates },
- { .parent = &sys_ck, .rates = clkout2_src_sys_rates },
- { .parent = &omap_96m_alwon_fck, .rates = clkout2_src_96m_rates },
- { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates },
+ { .parent = &core_ck, .rates = clkout2_src_core_rates },
+ { .parent = &sys_ck, .rates = clkout2_src_sys_rates },
+ { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates },
+ { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates },
{ .parent = NULL }
};
static struct clk clkout2_src_ck = {
.name = "clkout2_src_ck",
+ .ops = &clkops_omap2_dflt,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP3430_CM_CLKOUT_CTRL,
.enable_bit = OMAP3430_CLKOUT2_EN_SHIFT,
.clksel_reg = OMAP3430_CM_CLKOUT_CTRL,
.clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK,
.clksel = clkout2_src_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .clkdm_name = "core_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk sys_clkout2 = {
.name = "sys_clkout2",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP3430_CM_CLKOUT_CTRL,
.clksel_mask = OMAP3430_CLKOUT2_DIV_MASK,
.clksel = sys_clkout2_clksel,
- .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
static struct clk corex2_fck = {
.name = "corex2_fck",
+ .ops = &clkops_null,
.parent = &dpll3_m2x2_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
/* DPLL power domain clock controls */
-static const struct clksel div2_core_clksel[] = {
- { .parent = &core_ck, .rates = div2_rates },
+static const struct clksel_rate div4_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_343X },
+ { .div = 4, .val = 4, .flags = RATE_IN_343X },
+ { .div = 0 }
+};
+
+static const struct clksel div4_core_clksel[] = {
+ { .parent = &core_ck, .rates = div4_rates },
{ .parent = NULL }
};
*/
static struct clk dpll1_fck = {
.name = "dpll1_fck",
+ .ops = &clkops_null,
.parent = &core_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.clksel_mask = OMAP3430_MPU_CLK_SRC_MASK,
- .clksel = div2_core_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clksel = div4_core_clksel,
.recalc = &omap2_clksel_recalc,
};
-/*
- * MPU clksel:
- * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll1_fck'
- */
-static const struct clksel mpu_clksel[] = {
- { .parent = &dpll1_fck, .rates = dpll_bypass_rates },
- { .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk mpu_ck = {
.name = "mpu_ck",
+ .ops = &clkops_null,
.parent = &dpll1_x2m2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
- .clksel_mask = OMAP3430_ST_MPU_CLK_MASK,
- .clksel = mpu_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "mpu_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
static struct clk arm_fck = {
.name = "arm_fck",
+ .ops = &clkops_null,
.parent = &mpu_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_MPU_CLK_MASK,
.clksel = arm_fck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
*/
static struct clk emu_mpu_alwon_ck = {
.name = "emu_mpu_alwon_ck",
+ .ops = &clkops_null,
.parent = &mpu_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
static struct clk dpll2_fck = {
.name = "dpll2_fck",
+ .ops = &clkops_null,
.parent = &core_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK,
- .clksel = div2_core_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clksel = div4_core_clksel,
.recalc = &omap2_clksel_recalc,
};
-/*
- * IVA2 clksel:
- * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll2_fck'
- */
-
-static const struct clksel iva2_clksel[] = {
- { .parent = &dpll2_fck, .rates = dpll_bypass_rates },
- { .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk iva2_ck = {
.name = "iva2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll2_m2_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
- OMAP3430_CM_IDLEST_PLL),
- .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK,
- .clksel = iva2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.clkdm_name = "iva2_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
/* Common interface clocks */
+static const struct clksel div2_core_clksel[] = {
+ { .parent = &core_ck, .rates = div2_rates },
+ { .parent = NULL }
+};
+
static struct clk l3_ick = {
.name = "l3_ick",
+ .ops = &clkops_null,
.parent = &core_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_L3_MASK,
.clksel = div2_core_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l3_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk l4_ick = {
.name = "l4_ick",
+ .ops = &clkops_null,
.parent = &l3_ick,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_L4_MASK,
.clksel = div2_l3_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
static struct clk rm_ick = {
.name = "rm_ick",
+ .ops = &clkops_null,
.parent = &l4_ick,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_RM_MASK,
.clksel = div2_l4_clksel,
- .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
static struct clk gfx_l3_ck = {
.name = "gfx_l3_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.recalc = &followparent_recalc,
};
static struct clk gfx_l3_fck = {
.name = "gfx_l3_fck",
+ .ops = &clkops_null,
.parent = &gfx_l3_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
.clksel = gfx_l3_clksel,
- .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gfx_l3_ick = {
.name = "gfx_l3_ick",
+ .ops = &clkops_null,
.parent = &gfx_l3_ck,
- .flags = CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gfx_cg1_ck = {
.name = "gfx_cg1_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &gfx_l3_fck, /* REVISIT: correct? */
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_2D_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gfx_cg2_ck = {
.name = "gfx_cg2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &gfx_l3_fck, /* REVISIT: correct? */
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_3D_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sgx_fck = {
.name = "sgx_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430ES2_EN_SGX_SHIFT,
+ .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK,
.clksel = sgx_clksel,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "sgx_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk sgx_ick = {
.name = "sgx_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
- .enable_bit = OMAP3430ES2_EN_SGX_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
+ .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
.clkdm_name = "sgx_clkdm",
.recalc = &followparent_recalc,
};
static struct clk d2d_26m_fck = {
.name = "d2d_26m_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES1_EN_D2D_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.clkdm_name = "d2d_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt10_fck = {
.name = "gpt10_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT10_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt11_fck = {
.name = "gpt11_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT11_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk cpefuse_fck = {
.name = "cpefuse_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
.enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.recalc = &followparent_recalc,
};
static struct clk ts_fck = {
.name = "ts_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &omap_32k_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
.enable_bit = OMAP3430ES2_EN_TS_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.recalc = &followparent_recalc,
};
static struct clk usbtll_fck = {
.name = "usbtll_fck",
- .parent = &omap_120m_fck,
+ .ops = &clkops_omap2_dflt,
+ .parent = &dpll5_m2_ck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
.enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.recalc = &followparent_recalc,
};
static struct clk core_96m_fck = {
.name = "core_96m_fck",
+ .ops = &clkops_null,
.parent = &omap_96m_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs3_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES2_EN_MMC3_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs2_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MMC2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mspro_fck = {
.name = "mspro_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MSPRO_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs1_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MMC1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c3_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c2_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c1_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp5_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 5,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
.clksel_mask = OMAP2_MCBSP5_CLKS_MASK,
.clksel = mcbsp_15_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk mcbsp1_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
.clksel_mask = OMAP2_MCBSP1_CLKS_MASK,
.clksel = mcbsp_15_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk core_48m_fck = {
.name = "core_48m_fck",
+ .ops = &clkops_null,
.parent = &omap_48m_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi4_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk mcspi3_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk mcspi2_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk mcspi1_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk uart2_fck = {
.name = "uart2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk uart1_fck = {
.name = "uart1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk fshostusb_fck = {
.name = "fshostusb_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.recalc = &followparent_recalc,
};
static struct clk core_12m_fck = {
.name = "core_12m_fck",
+ .ops = &clkops_null,
.parent = &omap_12m_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk hdq_fck = {
.name = "hdq_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_12m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_HDQ_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk ssi_ssr_fck = {
.name = "ssi_ssr_fck",
+ .ops = &clkops_omap2_dflt,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_SSI_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_SSI_MASK,
.clksel = ssi_ssr_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk ssi_sst_fck = {
.name = "ssi_sst_fck",
+ .ops = &clkops_null,
.parent = &ssi_ssr_fck,
.fixed_div = 2,
- .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
.recalc = &omap2_fixed_divisor_recalc,
};
*/
static struct clk core_l3_ick = {
.name = "core_l3_ick",
+ .ops = &clkops_null,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk hsotgusb_ick = {
.name = "hsotgusb_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sdrc_ick = {
.name = "sdrc_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SDRC_SHIFT,
- .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpmc_fck = {
.name = "gpmc_fck",
+ .ops = &clkops_null,
.parent = &core_l3_ick,
- .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
- ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT, /* huh? */
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk security_l3_ick = {
.name = "security_l3_ick",
+ .ops = &clkops_null,
.parent = &l3_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
static struct clk pka_ick = {
.name = "pka_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_PKA_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk core_l4_ick = {
.name = "core_l4_ick",
+ .ops = &clkops_null,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usbtll_ick = {
.name = "usbtll_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs3_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430ES2_EN_MMC3_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
/* Intersystem Communication Registers - chassis mode only */
static struct clk icr_ick = {
.name = "icr_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_ICR_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk aes2_ick = {
.name = "aes2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_AES2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sha12_ick = {
.name = "sha12_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SHA12_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk des2_ick = {
.name = "des2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_DES2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs2_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MMC2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs1_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MMC1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mspro_ick = {
.name = "mspro_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MSPRO_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk hdq_ick = {
.name = "hdq_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HDQ_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi4_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi3_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi2_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi1_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c3_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c2_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c1_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk uart2_ick = {
.name = "uart2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk uart1_ick = {
.name = "uart1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt11_ick = {
.name = "gpt11_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_GPT11_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt10_ick = {
.name = "gpt10_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_GPT10_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp5_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 5,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp1_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk fac_ick = {
.name = "fac_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430ES1_EN_FAC_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mailboxes_ick = {
.name = "mailboxes_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MAILBOXES_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk omapctrl_ick = {
.name = "omapctrl_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT,
- .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.recalc = &followparent_recalc,
};
static struct clk ssi_l4_ick = {
.name = "ssi_l4_ick",
+ .ops = &clkops_null,
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk ssi_ick = {
.name = "ssi_ick",
+ .ops = &clkops_omap2_dflt,
.parent = &ssi_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SSI_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usb_l4_ick = {
.name = "usb_l4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ick,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
.clksel = usb_l4_clksel,
- .flags = CLOCK_IN_OMAP3430ES1,
.recalc = &omap2_clksel_recalc,
};
static struct clk security_l4_ick2 = {
.name = "security_l4_ick2",
+ .ops = &clkops_null,
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
static struct clk aes1_ick = {
.name = "aes1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l4_ick2,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_AES1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk rng_ick = {
.name = "rng_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l4_ick2,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_RNG_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk sha11_ick = {
.name = "sha11_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l4_ick2,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_SHA11_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk des1_ick = {
.name = "des1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l4_ick2,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_DES1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
/* DSS */
-static const struct clksel dss1_alwon_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk dss1_alwon_fck = {
.name = "dss1_alwon_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &dpll4_m4x2_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS1_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = dss1_alwon_fck_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
static struct clk dss_tv_fck = {
.name = "dss_tv_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &omap_54m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
static struct clk dss_96m_fck = {
.name = "dss_96m_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &omap_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
static struct clk dss2_alwon_fck = {
.name = "dss2_alwon_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
static struct clk dss_ick = {
/* Handles both L3 and L4 clocks */
.name = "dss_ick",
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
/* CAM */
-static const struct clksel cam_mclk_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk cam_mclk = {
.name = "cam_mclk",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m5x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = cam_mclk_clksel,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "cam_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "cam_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk csi2_96m_fck = {
+ .name = "csi2_96m_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &core_96m_fck,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_CSI2_SHIFT,
.clkdm_name = "cam_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
- .parent = &omap_120m_fck,
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &dpll5_m2_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usbhost_48m_fck = {
.name = "usbhost_48m_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usbhost_ick = {
/* Handles both L3 and L4 clocks */
.name = "usbhost_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
- .clkdm_name = "usbhost_clkdm",
- .recalc = &followparent_recalc,
-};
-
-static struct clk usbhost_sar_fck = {
- .name = "usbhost_sar_fck",
- .parent = &osc_sys_ck,
- .init = &omap2_init_clk_clkdm,
- .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
- .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
static const struct clksel usim_clksel[] = {
{ .parent = &omap_96m_fck, .rates = usim_96m_rates },
- { .parent = &omap_120m_fck, .rates = usim_120m_rates },
+ { .parent = &dpll5_m2_ck, .rates = usim_120m_rates },
{ .parent = &sys_ck, .rates = div2_rates },
{ .parent = NULL },
};
/* 3430ES2 only */
static struct clk usim_fck = {
.name = "usim_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK,
.clksel = usim_clksel,
- .flags = CLOCK_IN_OMAP3430ES2,
.recalc = &omap2_clksel_recalc,
};
/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
static struct clk gpt1_fck = {
.name = "gpt1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT1_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT1_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk wkup_32k_fck = {
.name = "wkup_32k_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clk_clkdm,
.parent = &omap_32k_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio1_dbck = {
.name = "gpio1_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt2_fck = {
.name = "wdt2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_WDT2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wkup_l4_ick = {
.name = "wkup_l4_ick",
+ .ops = &clkops_null,
.parent = &sys_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
/* Never specifically named in the TRM, so we have to infer a likely name */
static struct clk usim_ick = {
.name = "usim_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt2_ick = {
.name = "wdt2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt1_ick = {
.name = "wdt1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio1_ick = {
.name = "gpio1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk omap_32ksync_ick = {
.name = "omap_32ksync_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_32KSYNC_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_ick = {
.name = "gpt12_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT12_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt1_ick = {
.name = "gpt1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk per_96m_fck = {
.name = "per_96m_fck",
+ .ops = &clkops_null,
.parent = &omap_96m_alwon_fck,
.init = &omap2_init_clk_clkdm,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk per_48m_fck = {
.name = "per_48m_fck",
+ .ops = &clkops_null,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk uart3_fck = {
.name = "uart3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_48m_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_UART3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt2_fck = {
.name = "gpt2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT2_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT2_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt3_fck = {
.name = "gpt3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT3_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT3_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt4_fck = {
.name = "gpt4_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT4_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT4_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt5_fck = {
.name = "gpt5_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT5_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT5_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt6_fck = {
.name = "gpt6_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT6_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT6_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt7_fck = {
.name = "gpt7_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT7_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT7_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt8_fck = {
.name = "gpt8_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT8_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT8_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt9_fck = {
.name = "gpt9_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT9_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT9_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk per_32k_alwon_fck = {
.name = "per_32k_alwon_fck",
+ .ops = &clkops_null,
.parent = &omap_32k_fck,
.clkdm_name = "per_clkdm",
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
};
static struct clk gpio6_dbck = {
.name = "gpio6_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio5_dbck = {
.name = "gpio5_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio4_dbck = {
.name = "gpio4_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio3_dbck = {
.name = "gpio3_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio2_dbck = {
.name = "gpio2_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt3_fck = {
.name = "wdt3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_WDT3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk per_l4_ick = {
.name = "per_l4_ick",
+ .ops = &clkops_null,
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio6_ick = {
.name = "gpio6_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio5_ick = {
.name = "gpio5_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio4_ick = {
.name = "gpio4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio3_ick = {
.name = "gpio3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio2_ick = {
.name = "gpio2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt3_ick = {
.name = "wdt3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk uart3_ick = {
.name = "uart3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_UART3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt9_ick = {
.name = "gpt9_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT9_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt8_ick = {
.name = "gpt8_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT8_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt7_ick = {
.name = "gpt7_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT7_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt6_ick = {
.name = "gpt6_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT6_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt5_ick = {
.name = "gpt5_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT5_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt4_ick = {
.name = "gpt4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt3_ick = {
.name = "gpt3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt2_ick = {
.name = "gpt2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp2_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp3_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp4_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static const struct clksel mcbsp_234_clksel[] = {
- { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
- { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
+ { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+ { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
{ .parent = NULL }
};
static struct clk mcbsp2_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
.clksel_mask = OMAP2_MCBSP2_CLKS_MASK,
.clksel = mcbsp_234_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk mcbsp3_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
.clksel_mask = OMAP2_MCBSP3_CLKS_MASK,
.clksel = mcbsp_234_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk mcbsp4_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
.clksel_mask = OMAP2_MCBSP4_CLKS_MASK,
.clksel = mcbsp_234_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
*/
static struct clk emu_src_ck = {
.name = "emu_src_ck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_MUX_CTRL_MASK,
.clksel = emu_src_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk pclk_fck = {
.name = "pclk_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_PCLK_MASK,
.clksel = pclk_emu_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk pclkx2_fck = {
.name = "pclkx2_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK,
.clksel = pclkx2_emu_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk atclk_fck = {
.name = "atclk_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK,
.clksel = atclk_emu_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk traceclk_src_fck = {
.name = "traceclk_src_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK,
.clksel = emu_src_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk traceclk_fck = {
.name = "traceclk_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK,
.clksel = traceclk_clksel,
- .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* SmartReflex fclk (VDD1) */
static struct clk sr1_fck = {
.name = "sr1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_SR1_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
/* SmartReflex fclk (VDD2) */
static struct clk sr2_fck = {
.name = "sr2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_SR2_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
static struct clk sr_l4_ick = {
.name = "sr_l4_ick",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
+ .ops = &clkops_null,
.parent = &secure_32k_fck,
- .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
};
static struct clk wdt1_fck = {
.name = "wdt1_fck",
+ .ops = &clkops_null,
.parent = &secure_32k_fck,
- .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
- .recalc = &followparent_recalc,
-};
-
-static struct clk *onchip_34xx_clks[] __initdata = {
- &omap_32k_fck,
- &virt_12m_ck,
- &virt_13m_ck,
- &virt_16_8m_ck,
- &virt_19_2m_ck,
- &virt_26m_ck,
- &virt_38_4m_ck,
- &osc_sys_ck,
- &sys_ck,
- &sys_altclk,
- &mcbsp_clks,
- &sys_clkout1,
- &dpll1_ck,
- &dpll1_x2_ck,
- &dpll1_x2m2_ck,
- &dpll2_ck,
- &dpll2_m2_ck,
- &dpll3_ck,
- &core_ck,
- &dpll3_x2_ck,
- &dpll3_m2_ck,
- &dpll3_m2x2_ck,
- &dpll3_m3_ck,
- &dpll3_m3x2_ck,
- &emu_core_alwon_ck,
- &dpll4_ck,
- &dpll4_x2_ck,
- &omap_96m_alwon_fck,
- &omap_96m_fck,
- &cm_96m_fck,
- &virt_omap_54m_fck,
- &omap_54m_fck,
- &omap_48m_fck,
- &omap_12m_fck,
- &dpll4_m2_ck,
- &dpll4_m2x2_ck,
- &dpll4_m3_ck,
- &dpll4_m3x2_ck,
- &dpll4_m4_ck,
- &dpll4_m4x2_ck,
- &dpll4_m5_ck,
- &dpll4_m5x2_ck,
- &dpll4_m6_ck,
- &dpll4_m6x2_ck,
- &emu_per_alwon_ck,
- &dpll5_ck,
- &dpll5_m2_ck,
- &omap_120m_fck,
- &clkout2_src_ck,
- &sys_clkout2,
- &corex2_fck,
- &dpll1_fck,
- &mpu_ck,
- &arm_fck,
- &emu_mpu_alwon_ck,
- &dpll2_fck,
- &iva2_ck,
- &l3_ick,
- &l4_ick,
- &rm_ick,
- &gfx_l3_ck,
- &gfx_l3_fck,
- &gfx_l3_ick,
- &gfx_cg1_ck,
- &gfx_cg2_ck,
- &sgx_fck,
- &sgx_ick,
- &d2d_26m_fck,
- &gpt10_fck,
- &gpt11_fck,
- &cpefuse_fck,
- &ts_fck,
- &usbtll_fck,
- &core_96m_fck,
- &mmchs3_fck,
- &mmchs2_fck,
- &mspro_fck,
- &mmchs1_fck,
- &i2c3_fck,
- &i2c2_fck,
- &i2c1_fck,
- &mcbsp5_fck,
- &mcbsp1_fck,
- &core_48m_fck,
- &mcspi4_fck,
- &mcspi3_fck,
- &mcspi2_fck,
- &mcspi1_fck,
- &uart2_fck,
- &uart1_fck,
- &fshostusb_fck,
- &core_12m_fck,
- &hdq_fck,
- &ssi_ssr_fck,
- &ssi_sst_fck,
- &core_l3_ick,
- &hsotgusb_ick,
- &sdrc_ick,
- &gpmc_fck,
- &security_l3_ick,
- &pka_ick,
- &core_l4_ick,
- &usbtll_ick,
- &mmchs3_ick,
- &icr_ick,
- &aes2_ick,
- &sha12_ick,
- &des2_ick,
- &mmchs2_ick,
- &mmchs1_ick,
- &mspro_ick,
- &hdq_ick,
- &mcspi4_ick,
- &mcspi3_ick,
- &mcspi2_ick,
- &mcspi1_ick,
- &i2c3_ick,
- &i2c2_ick,
- &i2c1_ick,
- &uart2_ick,
- &uart1_ick,
- &gpt11_ick,
- &gpt10_ick,
- &mcbsp5_ick,
- &mcbsp1_ick,
- &fac_ick,
- &mailboxes_ick,
- &omapctrl_ick,
- &ssi_l4_ick,
- &ssi_ick,
- &usb_l4_ick,
- &security_l4_ick2,
- &aes1_ick,
- &rng_ick,
- &sha11_ick,
- &des1_ick,
- &dss1_alwon_fck,
- &dss_tv_fck,
- &dss_96m_fck,
- &dss2_alwon_fck,
- &dss_ick,
- &cam_mclk,
- &cam_ick,
- &usbhost_120m_fck,
- &usbhost_48m_fck,
- &usbhost_ick,
- &usbhost_sar_fck,
- &usim_fck,
- &gpt1_fck,
- &wkup_32k_fck,
- &gpio1_dbck,
- &wdt2_fck,
- &wkup_l4_ick,
- &usim_ick,
- &wdt2_ick,
- &wdt1_ick,
- &gpio1_ick,
- &omap_32ksync_ick,
- &gpt12_ick,
- &gpt1_ick,
- &per_96m_fck,
- &per_48m_fck,
- &uart3_fck,
- &gpt2_fck,
- &gpt3_fck,
- &gpt4_fck,
- &gpt5_fck,
- &gpt6_fck,
- &gpt7_fck,
- &gpt8_fck,
- &gpt9_fck,
- &per_32k_alwon_fck,
- &gpio6_dbck,
- &gpio5_dbck,
- &gpio4_dbck,
- &gpio3_dbck,
- &gpio2_dbck,
- &wdt3_fck,
- &per_l4_ick,
- &gpio6_ick,
- &gpio5_ick,
- &gpio4_ick,
- &gpio3_ick,
- &gpio2_ick,
- &wdt3_ick,
- &uart3_ick,
- &gpt9_ick,
- &gpt8_ick,
- &gpt7_ick,
- &gpt6_ick,
- &gpt5_ick,
- &gpt4_ick,
- &gpt3_ick,
- &gpt2_ick,
- &mcbsp2_ick,
- &mcbsp3_ick,
- &mcbsp4_ick,
- &mcbsp2_fck,
- &mcbsp3_fck,
- &mcbsp4_fck,
- &emu_src_ck,
- &pclk_fck,
- &pclkx2_fck,
- &atclk_fck,
- &traceclk_src_fck,
- &traceclk_fck,
- &sr1_fck,
- &sr2_fck,
- &sr_l4_ick,
- &secure_32k_fck,
- &gpt12_fck,
- &wdt1_fck,
+ .recalc = &followparent_recalc,
};
#endif
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/limits.h>
+#include <linux/err.h>
#include <linux/io.h>
if (!omap_chip_is(autodep->omap_chip))
return;
- pwrdm = pwrdm_lookup(autodep->pwrdm_name);
+ pwrdm = pwrdm_lookup(autodep->pwrdm.name);
if (!pwrdm) {
- pr_debug("clockdomain: _autodep_lookup: powerdomain %s "
- "does not exist\n", autodep->pwrdm_name);
- WARN_ON(1);
- return;
+ pr_err("clockdomain: autodeps: powerdomain %s does not exist\n",
+ autodep->pwrdm.name);
+ pwrdm = ERR_PTR(-ENOENT);
}
- autodep->pwrdm = pwrdm;
-
- return;
+ autodep->pwrdm.ptr = pwrdm;
}
/*
{
struct clkdm_pwrdm_autodep *autodep;
- for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
- if (!autodep->pwrdm)
+ for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
+ if (IS_ERR(autodep->pwrdm.ptr))
+ continue;
+
+ if (!omap_chip_is(autodep->omap_chip))
continue;
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
- "pwrdm %s\n", autodep->pwrdm_name,
- clkdm->pwrdm->name);
+ "pwrdm %s\n", autodep->pwrdm.ptr->name,
+ clkdm->pwrdm.ptr->name);
- pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm);
- pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm);
+ pwrdm_add_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+ pwrdm_add_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
}
}
{
struct clkdm_pwrdm_autodep *autodep;
- for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
- if (!autodep->pwrdm)
+ for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
+ if (IS_ERR(autodep->pwrdm.ptr))
+ continue;
+
+ if (!omap_chip_is(autodep->omap_chip))
continue;
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
- "pwrdm %s\n", autodep->pwrdm_name,
- clkdm->pwrdm->name);
+ "pwrdm %s\n", autodep->pwrdm.ptr->name,
+ clkdm->pwrdm.ptr->name);
- pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm);
- pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm);
+ pwrdm_del_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+ pwrdm_del_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
}
}
autodeps = init_autodeps;
if (autodeps)
- for (autodep = autodeps; autodep->pwrdm_name; autodep++)
+ for (autodep = autodeps; autodep->pwrdm.ptr; autodep++)
_autodep_lookup(autodep);
}
if (!omap_chip_is(clkdm->omap_chip))
return -EINVAL;
- pwrdm = pwrdm_lookup(clkdm->pwrdm_name);
+ pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
if (!pwrdm) {
- pr_debug("clockdomain: clkdm_register %s: powerdomain %s "
- "does not exist\n", clkdm->name, clkdm->pwrdm_name);
+ pr_err("clockdomain: %s: powerdomain %s does not exist\n",
+ clkdm->name, clkdm->pwrdm.name);
return -EINVAL;
}
- clkdm->pwrdm = pwrdm;
+ clkdm->pwrdm.ptr = pwrdm;
mutex_lock(&clkdm_mutex);
/* Verify that the clockdomain is not already registered */
if (_clkdm_lookup(clkdm->name)) {
ret = -EEXIST;
goto cr_unlock;
- };
+ }
list_add(&clkdm->node, &clkdm_list);
if (!clkdm)
return -EINVAL;
- pwrdm_del_clkdm(clkdm->pwrdm, clkdm);
+ pwrdm_del_clkdm(clkdm->pwrdm.ptr, clkdm);
mutex_lock(&clkdm_mutex);
list_del(&clkdm->node);
if (!clkdm)
return NULL;
- return clkdm->pwrdm;
+ return clkdm->pwrdm.ptr;
}
if (!clkdm)
return -EINVAL;
- v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ v = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
v &= clkdm->clktrctrl_mask;
v >>= __ffs(clkdm->clktrctrl_mask);
if (cpu_is_omap24xx()) {
cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
- clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
} else if (cpu_is_omap34xx()) {
__ffs(clkdm->clktrctrl_mask));
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
- clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
} else {
BUG();
if (cpu_is_omap24xx()) {
cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
- clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
} else if (cpu_is_omap34xx()) {
__ffs(clkdm->clktrctrl_mask));
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
- clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
} else {
BUG();
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm->prcm_offs,
+ clkdm->pwrdm.ptr->prcm_offs,
CM_CLKSTCTRL);
}
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
else
omap2_clkdm_wakeup(clkdm);
+ pwrdm_wait_transition(clkdm->pwrdm.ptr);
+
return 0;
}
/*
* OMAP2/3-common clockdomains
+ *
+ * Even though the 2420 has a single PRCM module from the
+ * interconnect's perspective, internally it does appear to have
+ * separate PRM and CM clockdomains. The usual test case is
+ * sys_clkout/sys_clkout2.
*/
/* This is an implicit clockdomain - it is never defined as such in TRM */
static struct clockdomain wkup_clkdm = {
.name = "wkup_clkdm",
- .pwrdm_name = "wkup_pwrdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain prm_clkdm = {
+ .name = "prm_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain cm_clkdm = {
+ .name = "cm_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
static struct clockdomain mpu_2420_clkdm = {
.name = "mpu_clkdm",
- .pwrdm_name = "mpu_pwrdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
static struct clockdomain iva1_2420_clkdm = {
.name = "iva1_clkdm",
- .pwrdm_name = "dsp_pwrdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
static struct clockdomain mpu_2430_clkdm = {
.name = "mpu_clkdm",
- .pwrdm_name = "mpu_pwrdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
static struct clockdomain mdm_clkdm = {
.name = "mdm_clkdm",
- .pwrdm_name = "mdm_pwrdm",
+ .pwrdm = { .name = "mdm_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
static struct clockdomain dsp_clkdm = {
.name = "dsp_clkdm",
- .pwrdm_name = "dsp_pwrdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
static struct clockdomain gfx_24xx_clkdm = {
.name = "gfx_clkdm",
- .pwrdm_name = "gfx_pwrdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
static struct clockdomain core_l3_24xx_clkdm = {
.name = "core_l3_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
static struct clockdomain core_l4_24xx_clkdm = {
.name = "core_l4_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
static struct clockdomain dss_24xx_clkdm = {
.name = "dss_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
static struct clockdomain mpu_34xx_clkdm = {
.name = "mpu_clkdm",
- .pwrdm_name = "mpu_pwrdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
static struct clockdomain neon_clkdm = {
.name = "neon_clkdm",
- .pwrdm_name = "neon_pwrdm",
+ .pwrdm = { .name = "neon_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
static struct clockdomain iva2_clkdm = {
.name = "iva2_clkdm",
- .pwrdm_name = "iva2_pwrdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
static struct clockdomain gfx_3430es1_clkdm = {
.name = "gfx_clkdm",
- .pwrdm_name = "gfx_pwrdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
static struct clockdomain sgx_clkdm = {
.name = "sgx_clkdm",
- .pwrdm_name = "sgx_pwrdm",
+ .pwrdm = { .name = "sgx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
/*
*/
static struct clockdomain d2d_clkdm = {
.name = "d2d_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
static struct clockdomain core_l3_34xx_clkdm = {
.name = "core_l3_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
static struct clockdomain core_l4_34xx_clkdm = {
.name = "core_l4_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
static struct clockdomain dss_34xx_clkdm = {
.name = "dss_clkdm",
- .pwrdm_name = "dss_pwrdm",
+ .pwrdm = { .name = "dss_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
static struct clockdomain cam_clkdm = {
.name = "cam_clkdm",
- .pwrdm_name = "cam_pwrdm",
+ .pwrdm = { .name = "cam_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
static struct clockdomain usbhost_clkdm = {
.name = "usbhost_clkdm",
- .pwrdm_name = "usbhost_pwrdm",
+ .pwrdm = { .name = "usbhost_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
static struct clockdomain per_clkdm = {
.name = "per_clkdm",
- .pwrdm_name = "per_pwrdm",
+ .pwrdm = { .name = "per_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
static struct clockdomain emu_clkdm = {
.name = "emu_clkdm",
- .pwrdm_name = "emu_pwrdm",
- .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP,
+ .pwrdm = { .name = "emu_pwrdm" },
+ .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
+static struct clockdomain dpll1_clkdm = {
+ .name = "dpll1_clkdm",
+ .pwrdm = { .name = "dpll1_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll2_clkdm = {
+ .name = "dpll2_clkdm",
+ .pwrdm = { .name = "dpll2_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll3_clkdm = {
+ .name = "dpll3_clkdm",
+ .pwrdm = { .name = "dpll3_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll4_clkdm = {
+ .name = "dpll4_clkdm",
+ .pwrdm = { .name = "dpll4_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll5_clkdm = {
+ .name = "dpll5_clkdm",
+ .pwrdm = { .name = "dpll5_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+};
+
#endif /* CONFIG_ARCH_OMAP34XX */
/*
static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
{
- .pwrdm_name = "mpu_pwrdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
},
{
- .pwrdm_name = "iva2_pwrdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
},
- { NULL }
+ {
+ .pwrdm = { .name = NULL },
+ }
};
/*
static struct clockdomain *clockdomains_omap[] = {
&wkup_clkdm,
+ &cm_clkdm,
+ &prm_clkdm,
#ifdef CONFIG_ARCH_OMAP2420
&mpu_2420_clkdm,
&usbhost_clkdm,
&per_clkdm,
&emu_clkdm,
+ &dpll1_clkdm,
+ &dpll2_clkdm,
+ &dpll3_clkdm,
+ &dpll4_clkdm,
+ &dpll5_clkdm,
#endif
NULL,
#define OMAP24XX_EN_DES (1 << 0)
/* CM_IDLEST1_CORE specific bits */
-#define OMAP24XX_ST_MAILBOXES (1 << 30)
-#define OMAP24XX_ST_WDT4 (1 << 29)
-#define OMAP2420_ST_WDT3 (1 << 28)
-#define OMAP24XX_ST_MSPRO (1 << 27)
-#define OMAP24XX_ST_FAC (1 << 25)
-#define OMAP2420_ST_EAC (1 << 24)
-#define OMAP24XX_ST_HDQ (1 << 23)
-#define OMAP24XX_ST_I2C2 (1 << 20)
-#define OMAP24XX_ST_I2C1 (1 << 19)
-#define OMAP24XX_ST_MCBSP2 (1 << 16)
-#define OMAP24XX_ST_MCBSP1 (1 << 15)
-#define OMAP24XX_ST_DSS (1 << 0)
+#define OMAP24XX_ST_MAILBOXES_SHIFT 30
+#define OMAP24XX_ST_MAILBOXES_MASK (1 << 30)
+#define OMAP24XX_ST_WDT4_SHIFT 29
+#define OMAP24XX_ST_WDT4_MASK (1 << 29)
+#define OMAP2420_ST_WDT3_SHIFT 28
+#define OMAP2420_ST_WDT3_MASK (1 << 28)
+#define OMAP24XX_ST_MSPRO_SHIFT 27
+#define OMAP24XX_ST_MSPRO_MASK (1 << 27)
+#define OMAP24XX_ST_FAC_SHIFT 25
+#define OMAP24XX_ST_FAC_MASK (1 << 25)
+#define OMAP2420_ST_EAC_SHIFT 24
+#define OMAP2420_ST_EAC_MASK (1 << 24)
+#define OMAP24XX_ST_HDQ_SHIFT 23
+#define OMAP24XX_ST_HDQ_MASK (1 << 23)
+#define OMAP2420_ST_I2C2_SHIFT 20
+#define OMAP2420_ST_I2C2_MASK (1 << 20)
+#define OMAP2420_ST_I2C1_SHIFT 19
+#define OMAP2420_ST_I2C1_MASK (1 << 19)
+#define OMAP24XX_ST_MCBSP2_SHIFT 16
+#define OMAP24XX_ST_MCBSP2_MASK (1 << 16)
+#define OMAP24XX_ST_MCBSP1_SHIFT 15
+#define OMAP24XX_ST_MCBSP1_MASK (1 << 15)
+#define OMAP24XX_ST_DSS_SHIFT 0
+#define OMAP24XX_ST_DSS_MASK (1 << 0)
/* CM_IDLEST2_CORE */
-#define OMAP2430_ST_MCBSP5 (1 << 5)
-#define OMAP2430_ST_MCBSP4 (1 << 4)
-#define OMAP2430_ST_MCBSP3 (1 << 3)
-#define OMAP24XX_ST_SSI (1 << 1)
+#define OMAP2430_ST_MCBSP5_SHIFT 5
+#define OMAP2430_ST_MCBSP5_MASK (1 << 5)
+#define OMAP2430_ST_MCBSP4_SHIFT 4
+#define OMAP2430_ST_MCBSP4_MASK (1 << 4)
+#define OMAP2430_ST_MCBSP3_SHIFT 3
+#define OMAP2430_ST_MCBSP3_MASK (1 << 3)
+#define OMAP24XX_ST_SSI_SHIFT 1
+#define OMAP24XX_ST_SSI_MASK (1 << 1)
/* CM_IDLEST3_CORE */
/* 2430 only */
-#define OMAP2430_ST_SDRC (1 << 2)
+#define OMAP2430_ST_SDRC_MASK (1 << 2)
/* CM_IDLEST4_CORE */
-#define OMAP24XX_ST_PKA (1 << 4)
-#define OMAP24XX_ST_AES (1 << 3)
-#define OMAP24XX_ST_RNG (1 << 2)
-#define OMAP24XX_ST_SHA (1 << 1)
-#define OMAP24XX_ST_DES (1 << 0)
+#define OMAP24XX_ST_PKA_SHIFT 4
+#define OMAP24XX_ST_PKA_MASK (1 << 4)
+#define OMAP24XX_ST_AES_SHIFT 3
+#define OMAP24XX_ST_AES_MASK (1 << 3)
+#define OMAP24XX_ST_RNG_SHIFT 2
+#define OMAP24XX_ST_RNG_MASK (1 << 2)
+#define OMAP24XX_ST_SHA_SHIFT 1
+#define OMAP24XX_ST_SHA_MASK (1 << 1)
+#define OMAP24XX_ST_DES_SHIFT 0
+#define OMAP24XX_ST_DES_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
#define OMAP24XX_AUTO_CAM (1 << 31)
#define OMAP24XX_EN_32KSYNC (1 << 1)
/* CM_IDLEST_WKUP specific bits */
-#define OMAP2430_ST_ICR (1 << 6)
-#define OMAP24XX_ST_OMAPCTRL (1 << 5)
-#define OMAP24XX_ST_WDT1 (1 << 4)
-#define OMAP24XX_ST_MPU_WDT (1 << 3)
-#define OMAP24XX_ST_32KSYNC (1 << 1)
+#define OMAP2430_ST_ICR_SHIFT 6
+#define OMAP2430_ST_ICR_MASK (1 << 6)
+#define OMAP24XX_ST_OMAPCTRL_SHIFT 5
+#define OMAP24XX_ST_OMAPCTRL_MASK (1 << 5)
+#define OMAP24XX_ST_WDT1_SHIFT 4
+#define OMAP24XX_ST_WDT1_MASK (1 << 4)
+#define OMAP24XX_ST_MPU_WDT_SHIFT 3
+#define OMAP24XX_ST_MPU_WDT_MASK (1 << 3)
+#define OMAP24XX_ST_32KSYNC_SHIFT 1
+#define OMAP24XX_ST_32KSYNC_MASK (1 << 1)
/* CM_AUTOIDLE_WKUP */
#define OMAP24XX_AUTO_OMAPCTRL (1 << 5)
#define OMAP3430ES2_EN_CPEFUSE_MASK (1 << 0)
/* CM_IDLEST1_CORE specific bits */
-#define OMAP3430_ST_ICR (1 << 29)
-#define OMAP3430_ST_AES2 (1 << 28)
-#define OMAP3430_ST_SHA12 (1 << 27)
-#define OMAP3430_ST_DES2 (1 << 26)
-#define OMAP3430_ST_MSPRO (1 << 23)
-#define OMAP3430_ST_HDQ (1 << 22)
-#define OMAP3430ES1_ST_FAC (1 << 8)
-#define OMAP3430ES1_ST_MAILBOXES (1 << 7)
-#define OMAP3430_ST_OMAPCTRL (1 << 6)
-#define OMAP3430_ST_SDMA (1 << 2)
-#define OMAP3430_ST_SDRC (1 << 1)
-#define OMAP3430_ST_SSI (1 << 0)
+#define OMAP3430ES2_ST_MMC3_SHIFT 30
+#define OMAP3430ES2_ST_MMC3_MASK (1 << 30)
+#define OMAP3430_ST_ICR_SHIFT 29
+#define OMAP3430_ST_ICR_MASK (1 << 29)
+#define OMAP3430_ST_AES2_SHIFT 28
+#define OMAP3430_ST_AES2_MASK (1 << 28)
+#define OMAP3430_ST_SHA12_SHIFT 27
+#define OMAP3430_ST_SHA12_MASK (1 << 27)
+#define OMAP3430_ST_DES2_SHIFT 26
+#define OMAP3430_ST_DES2_MASK (1 << 26)
+#define OMAP3430_ST_MSPRO_SHIFT 23
+#define OMAP3430_ST_MSPRO_MASK (1 << 23)
+#define OMAP3430_ST_HDQ_SHIFT 22
+#define OMAP3430_ST_HDQ_MASK (1 << 22)
+#define OMAP3430ES1_ST_FAC_SHIFT 8
+#define OMAP3430ES1_ST_FAC_MASK (1 << 8)
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
+#define OMAP3430ES2_ST_SSI_IDLE_MASK (1 << 8)
+#define OMAP3430_ST_MAILBOXES_SHIFT 7
+#define OMAP3430_ST_MAILBOXES_MASK (1 << 7)
+#define OMAP3430_ST_OMAPCTRL_SHIFT 6
+#define OMAP3430_ST_OMAPCTRL_MASK (1 << 6)
+#define OMAP3430_ST_SDMA_SHIFT 2
+#define OMAP3430_ST_SDMA_MASK (1 << 2)
+#define OMAP3430_ST_SDRC_SHIFT 1
+#define OMAP3430_ST_SDRC_MASK (1 << 1)
+#define OMAP3430_ST_SSI_STDBY_SHIFT 0
+#define OMAP3430_ST_SSI_STDBY_MASK (1 << 0)
/* CM_IDLEST2_CORE */
-#define OMAP3430_ST_PKA (1 << 4)
-#define OMAP3430_ST_AES1 (1 << 3)
-#define OMAP3430_ST_RNG (1 << 2)
-#define OMAP3430_ST_SHA11 (1 << 1)
-#define OMAP3430_ST_DES1 (1 << 0)
+#define OMAP3430_ST_PKA_SHIFT 4
+#define OMAP3430_ST_PKA_MASK (1 << 4)
+#define OMAP3430_ST_AES1_SHIFT 3
+#define OMAP3430_ST_AES1_MASK (1 << 3)
+#define OMAP3430_ST_RNG_SHIFT 2
+#define OMAP3430_ST_RNG_MASK (1 << 2)
+#define OMAP3430_ST_SHA11_SHIFT 1
+#define OMAP3430_ST_SHA11_MASK (1 << 1)
+#define OMAP3430_ST_DES1_SHIFT 0
+#define OMAP3430_ST_DES1_MASK (1 << 0)
/* CM_IDLEST3_CORE */
#define OMAP3430ES2_ST_USBTLL_SHIFT 2
#define OMAP3430ES2_ST_USBTLL_MASK (1 << 2)
+#define OMAP3430ES2_ST_CPEFUSE_SHIFT 0
+#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
+#define OMAP3430ES2_AUTO_MMC3 (1 << 30)
+#define OMAP3430ES2_AUTO_MMC3_SHIFT 30
+#define OMAP3430ES2_AUTO_ICR (1 << 29)
+#define OMAP3430ES2_AUTO_ICR_SHIFT 29
#define OMAP3430_AUTO_AES2 (1 << 28)
#define OMAP3430_AUTO_AES2_SHIFT 28
#define OMAP3430_AUTO_SHA12 (1 << 27)
#define OMAP3430_AUTO_DES1_SHIFT 0
/* CM_AUTOIDLE3_CORE */
+#define OMAP3430ES2_AUTO_USBHOST (1 << 0)
+#define OMAP3430ES2_AUTO_USBHOST_SHIFT 0
+#define OMAP3430ES2_AUTO_USBTLL (1 << 2)
#define OMAP3430ES2_AUTO_USBTLL_SHIFT 2
#define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2)
#define OMAP3430ES1_CLKACTIVITY_GFX_MASK (1 << 0)
/* CM_FCLKEN_SGX */
-#define OMAP3430ES2_EN_SGX_SHIFT 1
-#define OMAP3430ES2_EN_SGX_MASK (1 << 1)
+#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT 1
+#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK (1 << 1)
+
+/* CM_ICLKEN_SGX */
+#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT 0
+#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK (1 << 0)
/* CM_CLKSEL_SGX */
#define OMAP3430ES2_CLKSEL_SGX_SHIFT 0
/* CM_FCLKEN_WKUP specific bits */
#define OMAP3430ES2_EN_USIMOCP_SHIFT 9
+#define OMAP3430ES2_EN_USIMOCP_MASK (1 << 9)
/* CM_ICLKEN_WKUP specific bits */
#define OMAP3430_EN_WDT1 (1 << 4)
#define OMAP3430_EN_32KSYNC_SHIFT 2
/* CM_IDLEST_WKUP specific bits */
-#define OMAP3430_ST_WDT2 (1 << 5)
-#define OMAP3430_ST_WDT1 (1 << 4)
-#define OMAP3430_ST_32KSYNC (1 << 2)
+#define OMAP3430ES2_ST_USIMOCP_SHIFT 9
+#define OMAP3430ES2_ST_USIMOCP_MASK (1 << 9)
+#define OMAP3430_ST_WDT2_SHIFT 5
+#define OMAP3430_ST_WDT2_MASK (1 << 5)
+#define OMAP3430_ST_WDT1_SHIFT 4
+#define OMAP3430_ST_WDT1_MASK (1 << 4)
+#define OMAP3430_ST_32KSYNC_SHIFT 2
+#define OMAP3430_ST_32KSYNC_MASK (1 << 2)
/* CM_AUTOIDLE_WKUP */
+#define OMAP3430ES2_AUTO_USIMOCP (1 << 9)
+#define OMAP3430ES2_AUTO_USIMOCP_SHIFT 9
#define OMAP3430_AUTO_WDT2 (1 << 5)
#define OMAP3430_AUTO_WDT2_SHIFT 5
#define OMAP3430_AUTO_WDT1 (1 << 4)
#define OMAP3430_ST_CORE_CLK_MASK (1 << 0)
/* CM_IDLEST2_CKGEN */
+#define OMAP3430ES2_ST_USIM_CLK_SHIFT 2
+#define OMAP3430ES2_ST_USIM_CLK_MASK (1 << 2)
#define OMAP3430ES2_ST_120M_CLK_SHIFT 1
#define OMAP3430ES2_ST_120M_CLK_MASK (1 << 1)
#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT 0
#define OMAP3430_CORE_DPLL_MULT_MASK (0x7ff << 16)
#define OMAP3430_CORE_DPLL_DIV_SHIFT 8
#define OMAP3430_CORE_DPLL_DIV_MASK (0x7f << 8)
-#define OMAP3430_SOURCE_54M (1 << 5)
-#define OMAP3430_SOURCE_48M (1 << 3)
+#define OMAP3430_SOURCE_96M_SHIFT 6
+#define OMAP3430_SOURCE_96M_MASK (1 << 6)
+#define OMAP3430_SOURCE_54M_SHIFT 5
+#define OMAP3430_SOURCE_54M_MASK (1 << 5)
+#define OMAP3430_SOURCE_48M_SHIFT 3
+#define OMAP3430_SOURCE_48M_MASK (1 << 3)
/* CM_CLKSEL2_PLL */
#define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8
#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT 0
/* CM_IDLEST_DSS */
-#define OMAP3430_ST_DSS (1 << 0)
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_DSS_IDLE_MASK (1 << 1)
+#define OMAP3430ES2_ST_DSS_STDBY_SHIFT 0
+#define OMAP3430ES2_ST_DSS_STDBY_MASK (1 << 0)
+#define OMAP3430ES1_ST_DSS_SHIFT 0
+#define OMAP3430ES1_ST_DSS_MASK (1 << 0)
/* CM_AUTOIDLE_DSS */
#define OMAP3430_AUTO_DSS (1 << 0)
#define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0)
/* CM_FCLKEN_CAM specific bits */
+#define OMAP3430_EN_CSI2 (1 << 1)
+#define OMAP3430_EN_CSI2_SHIFT 1
/* CM_ICLKEN_CAM specific bits */
/* CM_ICLKEN_PER specific bits */
/* CM_IDLEST_PER */
-#define OMAP3430_ST_WDT3 (1 << 12)
-#define OMAP3430_ST_MCBSP4 (1 << 2)
-#define OMAP3430_ST_MCBSP3 (1 << 1)
-#define OMAP3430_ST_MCBSP2 (1 << 0)
+#define OMAP3430_ST_WDT3_SHIFT 12
+#define OMAP3430_ST_WDT3_MASK (1 << 12)
+#define OMAP3430_ST_MCBSP4_SHIFT 2
+#define OMAP3430_ST_MCBSP4_MASK (1 << 2)
+#define OMAP3430_ST_MCBSP3_SHIFT 1
+#define OMAP3430_ST_MCBSP3_MASK (1 << 1)
+#define OMAP3430_ST_MCBSP2_SHIFT 0
+#define OMAP3430_ST_MCBSP2_MASK (1 << 0)
/* CM_AUTOIDLE_PER */
#define OMAP3430_AUTO_GPIO6 (1 << 17)
#define OMAP3430ES2_EN_USBHOST_MASK (1 << 0)
/* CM_IDLEST_USBHOST */
+#define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_USBHOST_IDLE_MASK (1 << 1)
+#define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT 0
+#define OMAP3430ES2_ST_USBHOST_STDBY_MASK (1 << 0)
/* CM_AUTOIDLE_USBHOST */
#define OMAP3430ES2_AUTO_USBHOST_SHIFT 0
#include <mach/eac.h>
#include <mach/mmc.h>
-#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
-static struct resource mbox_resources[] = {
+static struct resource cam_resources[] = {
{
- .start = OMAP2_MBOX_BASE,
- .end = OMAP2_MBOX_BASE + 0x11f,
+ .start = OMAP24XX_CAMERA_BASE,
+ .end = OMAP24XX_CAMERA_BASE + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_CAM_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device omap_cam_device = {
+ .name = "omap24xxcam",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cam_resources),
+ .resource = cam_resources,
+};
+
+static inline void omap_init_camera(void)
+{
+ platform_device_register(&omap_cam_device);
+}
+
+#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+
+static struct resource omap3isp_resources[] = {
+ {
+ .start = OMAP3430_ISP_BASE,
+ .end = OMAP3430_ISP_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CBUFF_BASE,
+ .end = OMAP3430_ISP_CBUFF_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CCP2_BASE,
+ .end = OMAP3430_ISP_CCP2_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CCDC_BASE,
+ .end = OMAP3430_ISP_CCDC_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_HIST_BASE,
+ .end = OMAP3430_ISP_HIST_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_H3A_BASE,
+ .end = OMAP3430_ISP_H3A_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_PREV_BASE,
+ .end = OMAP3430_ISP_PREV_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_RESZ_BASE,
+ .end = OMAP3430_ISP_RESZ_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_SBL_BASE,
+ .end = OMAP3430_ISP_SBL_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CSI2A_BASE,
+ .end = OMAP3430_ISP_CSI2A_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CSI2PHY_BASE,
+ .end = OMAP3430_ISP_CSI2PHY_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_34XX_CAM_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device omap3isp_device = {
+ .name = "omap3isp",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap3isp_resources),
+ .resource = omap3isp_resources,
+};
+
+static inline void omap_init_camera(void)
+{
+ platform_device_register(&omap3isp_device);
+}
+#else
+static inline void omap_init_camera(void)
+{
+}
+#endif
+
+#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
+
+#define MBOX_REG_SIZE 0x120
+
+static struct resource omap2_mbox_resources[] = {
+ {
+ .start = OMAP24XX_MAILBOX_BASE,
+ .end = OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
},
};
+static struct resource omap3_mbox_resources[] = {
+ {
+ .start = OMAP34XX_MAILBOX_BASE,
+ .end = OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_MAIL_U0_MPU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device mbox_device = {
- .name = "mailbox",
+ .name = "omap2-mailbox",
.id = -1,
- .num_resources = ARRAY_SIZE(mbox_resources),
- .resource = mbox_resources,
};
static inline void omap_init_mbox(void)
{
+ if (cpu_is_omap2420()) {
+ mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources);
+ mbox_device.resource = omap2_mbox_resources;
+ } else if (cpu_is_omap3430()) {
+ mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources);
+ mbox_device.resource = omap3_mbox_resources;
+ } else {
+ pr_err("%s: platform not supported\n", __func__);
+ return;
+ }
platform_device_register(&mbox_device);
}
#else
static inline void omap_init_mbox(void) { }
-#endif
+#endif /* CONFIG_OMAP_MBOX_FWK */
#if defined(CONFIG_OMAP_STI)
}
dummy_pdev.id = i;
- iclk = clk_get(dev, "mmchs_ick");
+ dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
+ iclk = clk_get(dev, "ick");
if (iclk && clk_enable(iclk))
iclk = NULL;
- fclk = clk_get(dev, "mmchs_fck");
+ fclk = clk_get(dev, "fck");
if (fclk && clk_enable(fclk))
fclk = NULL;
* in alphabetical order so they're easier to sort through.
*/
omap_hsmmc_reset();
+ omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
omap_hdq_init();
omap_chip.oc = CHIP_IS_OMAP3430;
if (omap_rev() == OMAP3430_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (omap_rev() > OMAP3430_REV_ES1_0)
+ else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
+ omap_rev() <= OMAP3430_REV_ES2_1)
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ else if (omap_rev() == OMAP3430_REV_ES3_0)
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+ else if (omap_rev() == OMAP3430_REV_ES3_1)
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
} else {
pr_err("Uninitialized omap_chip, please fix!\n");
}
#include <mach/mux.h>
#include <mach/omapfb.h>
#include <mach/sram.h>
-
-#include "memory.h"
+#include <mach/sdrc.h>
+#include <mach/gpmc.h>
#include "clock.h"
omapfb_reserve_sdram();
}
-void __init omap2_init_common_hw(void)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{
omap2_mux_init();
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
- omap2_init_memory();
+ omap2_sdrc_init(sp);
gpmc_init();
}
/*
- * Mailbox reservation modules for OMAP2
+ * Mailbox reservation modules for OMAP2/3
*
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
* Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- * and Paul Mundt <paul.mundt@nokia.com>
+ * and Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <mach/mailbox.h>
#include <mach/irqs.h>
-#define MAILBOX_REVISION 0x00
-#define MAILBOX_SYSCONFIG 0x10
-#define MAILBOX_SYSSTATUS 0x14
-#define MAILBOX_MESSAGE_0 0x40
-#define MAILBOX_MESSAGE_1 0x44
-#define MAILBOX_MESSAGE_2 0x48
-#define MAILBOX_MESSAGE_3 0x4c
-#define MAILBOX_MESSAGE_4 0x50
-#define MAILBOX_MESSAGE_5 0x54
-#define MAILBOX_FIFOSTATUS_0 0x80
-#define MAILBOX_FIFOSTATUS_1 0x84
-#define MAILBOX_FIFOSTATUS_2 0x88
-#define MAILBOX_FIFOSTATUS_3 0x8c
-#define MAILBOX_FIFOSTATUS_4 0x90
-#define MAILBOX_FIFOSTATUS_5 0x94
-#define MAILBOX_MSGSTATUS_0 0xc0
-#define MAILBOX_MSGSTATUS_1 0xc4
-#define MAILBOX_MSGSTATUS_2 0xc8
-#define MAILBOX_MSGSTATUS_3 0xcc
-#define MAILBOX_MSGSTATUS_4 0xd0
-#define MAILBOX_MSGSTATUS_5 0xd4
-#define MAILBOX_IRQSTATUS_0 0x100
-#define MAILBOX_IRQENABLE_0 0x104
-#define MAILBOX_IRQSTATUS_1 0x108
-#define MAILBOX_IRQENABLE_1 0x10c
-#define MAILBOX_IRQSTATUS_2 0x110
-#define MAILBOX_IRQENABLE_2 0x114
-#define MAILBOX_IRQSTATUS_3 0x118
-#define MAILBOX_IRQENABLE_3 0x11c
-
-static unsigned long mbox_base;
-
-#define MAILBOX_IRQ_NOTFULL(n) (1 << (2 * (n) + 1))
-#define MAILBOX_IRQ_NEWMSG(n) (1 << (2 * (n)))
+#define MAILBOX_REVISION 0x000
+#define MAILBOX_SYSCONFIG 0x010
+#define MAILBOX_SYSSTATUS 0x014
+#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m))
+#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m))
+#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m))
+#define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u))
+#define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u))
+
+#define MAILBOX_IRQ_NEWMSG(u) (1 << (2 * (u)))
+#define MAILBOX_IRQ_NOTFULL(u) (1 << (2 * (u) + 1))
+
+#define MBOX_REG_SIZE 0x120
+#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32))
+
+static void __iomem *mbox_base;
struct omap_mbox2_fifo {
unsigned long msg;
unsigned long irqstatus;
u32 newmsg_bit;
u32 notfull_bit;
+ u32 ctx[MBOX_NR_REGS];
};
static struct clk *mbox_ick_handle;
static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq);
-static inline unsigned int mbox_read_reg(unsigned int reg)
+static inline unsigned int mbox_read_reg(size_t ofs)
{
- return __raw_readl(mbox_base + reg);
+ return __raw_readl(mbox_base + ofs);
}
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
{
- __raw_writel(val, mbox_base + reg);
+ __raw_writel(val, mbox_base + ofs);
}
/* Mailbox H/W preparations */
}
clk_enable(mbox_ick_handle);
+ l = mbox_read_reg(MAILBOX_REVISION);
+ pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
+
/* set smart-idle & autoidle */
l = mbox_read_reg(MAILBOX_SYSCONFIG);
l |= 0x00000011;
return (enable & status & bit);
}
+static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
+{
+ int i;
+ struct omap_mbox2_priv *p = mbox->priv;
+
+ for (i = 0; i < MBOX_NR_REGS; i++) {
+ p->ctx[i] = mbox_read_reg(i * sizeof(u32));
+
+ dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
+ i, p->ctx[i]);
+ }
+}
+
+static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+ int i;
+ struct omap_mbox2_priv *p = mbox->priv;
+
+ for (i = 0; i < MBOX_NR_REGS; i++) {
+ mbox_write_reg(p->ctx[i], i * sizeof(u32));
+
+ dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
+ i, p->ctx[i]);
+ }
+}
+
static struct omap_mbox_ops omap2_mbox_ops = {
.type = OMAP_MBOX_TYPE2,
.startup = omap2_mbox_startup,
.disable_irq = omap2_mbox_disable_irq,
.ack_irq = omap2_mbox_ack_irq,
.is_irq = omap2_mbox_is_irq,
+ .save_ctx = omap2_mbox_save_ctx,
+ .restore_ctx = omap2_mbox_restore_ctx,
};
/*
/* DSP */
static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
.tx_fifo = {
- .msg = MAILBOX_MESSAGE_0,
- .fifo_stat = MAILBOX_FIFOSTATUS_0,
+ .msg = MAILBOX_MESSAGE(0),
+ .fifo_stat = MAILBOX_FIFOSTATUS(0),
},
.rx_fifo = {
- .msg = MAILBOX_MESSAGE_1,
- .msg_stat = MAILBOX_MSGSTATUS_1,
+ .msg = MAILBOX_MESSAGE(1),
+ .msg_stat = MAILBOX_MSGSTATUS(1),
},
- .irqenable = MAILBOX_IRQENABLE_0,
- .irqstatus = MAILBOX_IRQSTATUS_0,
+ .irqenable = MAILBOX_IRQENABLE(0),
+ .irqstatus = MAILBOX_IRQSTATUS(0),
.notfull_bit = MAILBOX_IRQ_NOTFULL(0),
.newmsg_bit = MAILBOX_IRQ_NEWMSG(1),
};
};
EXPORT_SYMBOL(mbox_dsp_info);
-/* IVA */
+#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
static struct omap_mbox2_priv omap2_mbox_iva_priv = {
.tx_fifo = {
- .msg = MAILBOX_MESSAGE_2,
- .fifo_stat = MAILBOX_FIFOSTATUS_2,
+ .msg = MAILBOX_MESSAGE(2),
+ .fifo_stat = MAILBOX_FIFOSTATUS(2),
},
.rx_fifo = {
- .msg = MAILBOX_MESSAGE_3,
- .msg_stat = MAILBOX_MSGSTATUS_3,
+ .msg = MAILBOX_MESSAGE(3),
+ .msg_stat = MAILBOX_MSGSTATUS(3),
},
- .irqenable = MAILBOX_IRQENABLE_3,
- .irqstatus = MAILBOX_IRQSTATUS_3,
+ .irqenable = MAILBOX_IRQENABLE(3),
+ .irqstatus = MAILBOX_IRQSTATUS(3),
.notfull_bit = MAILBOX_IRQ_NOTFULL(2),
.newmsg_bit = MAILBOX_IRQ_NEWMSG(3),
};
.ops = &omap2_mbox_ops,
.priv = &omap2_mbox_iva_priv,
};
+#endif
-static int __init omap2_mbox_probe(struct platform_device *pdev)
+static int __devinit omap2_mbox_probe(struct platform_device *pdev)
{
struct resource *res;
- int ret = 0;
-
- if (pdev->num_resources != 3) {
- dev_err(&pdev->dev, "invalid number of resources: %d\n",
- pdev->num_resources);
- return -ENODEV;
- }
+ int ret;
/* MBOX base */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev_err(&pdev->dev, "invalid mem resource\n");
return -ENODEV;
}
- mbox_base = res->start;
+ mbox_base = ioremap(res->start, res->end - res->start);
+ if (!mbox_base)
+ return -ENOMEM;
- /* DSP IRQ */
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (unlikely(!res)) {
+ /* DSP or IVA2 IRQ */
+ mbox_dsp_info.irq = platform_get_irq(pdev, 0);
+ if (mbox_dsp_info.irq < 0) {
dev_err(&pdev->dev, "invalid irq resource\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_dsp;
}
- mbox_dsp_info.irq = res->start;
- ret = omap_mbox_register(&mbox_dsp_info);
-
- /* IVA IRQ */
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
- if (unlikely(!res)) {
- dev_err(&pdev->dev, "invalid irq resource\n");
- return -ENODEV;
+ ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+ if (ret)
+ goto err_dsp;
+
+#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
+ if (cpu_is_omap2420()) {
+ /* IVA IRQ */
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+ if (unlikely(!res)) {
+ dev_err(&pdev->dev, "invalid irq resource\n");
+ ret = -ENODEV;
+ goto err_iva1;
+ }
+ mbox_iva_info.irq = res->start;
+ ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
+ if (ret)
+ goto err_iva1;
}
- mbox_iva_info.irq = res->start;
-
- ret = omap_mbox_register(&mbox_iva_info);
+#endif
+ return 0;
+err_iva1:
+ omap_mbox_unregister(&mbox_dsp_info);
+err_dsp:
+ iounmap(mbox_base);
return ret;
}
-static int omap2_mbox_remove(struct platform_device *pdev)
+static int __devexit omap2_mbox_remove(struct platform_device *pdev)
{
+#if defined(CONFIG_ARCH_OMAP2420)
+ omap_mbox_unregister(&mbox_iva_info);
+#endif
omap_mbox_unregister(&mbox_dsp_info);
+ iounmap(mbox_base);
return 0;
}
static struct platform_driver omap2_mbox_driver = {
.probe = omap2_mbox_probe,
- .remove = omap2_mbox_remove,
+ .remove = __devexit_p(omap2_mbox_remove),
.driver = {
- .name = "mailbox",
+ .name = "omap2-mailbox",
},
};
module_init(omap2_mbox_init);
module_exit(omap2_mbox_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
+MODULE_ALIAS("platform:omap2-mailbox");
#include <mach/cpu.h>
#include <mach/mcbsp.h>
-const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
-
static void omap2_mcbsp2_mux_setup(void)
{
omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP4_BASE,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP5_BASE,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/memory.h
- *
- * Interface for memory timing related functions for OMAP24XX
- *
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Copyright (C) 2005 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
-#define ARCH_ARM_MACH_OMAP2_MEMORY_H
-
-/* Memory timings */
-#define M_DDR 1
-#define M_LOCK_CTRL (1 << 2)
-#define M_UNLOCK 0
-#define M_LOCK 1
-
-struct memory_timings {
- u32 m_type; /* ddr = 1, sdr = 0 */
- u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
- u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
- u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
- u32 base_cs; /* base chip select to use for calculations */
-};
-
-extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
-extern u32 omap2_memory_get_slow_dll_ctrl(void);
-extern u32 omap2_memory_get_fast_dll_ctrl(void);
-extern u32 omap2_memory_get_type(void);
-u32 omap2_dll_force_needed(void);
-u32 omap2_reprogram_sdrc(u32 level, u32 force);
-void __init omap2_init_memory(void);
-void __init gpmc_init(void);
-
-#endif
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <mach/control.h>
#define VMMC2_315V 0x0c
#define VMMC2_300V 0x0b
#define VMMC2_285V 0x0a
+#define VMMC2_280V 0x09
#define VMMC2_260V 0x08
#define VMMC2_185V 0x06
#define VMMC2_DEDICATED 0x2E
struct omap_mmc_platform_data *mmc;
u8 twl_vmmc_dev_grp;
u8 twl_mmc_dedicated;
- char name[HSMMC_NAME_LEN];
-} hsmmc[] = {
+ char name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC] = {
{
.twl_vmmc_dev_grp = VMMC1_DEV_GRP,
.twl_mmc_dedicated = VMMC1_DEDICATED,
return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
}
+static int twl_mmc_get_cover_state(struct device *dev, int slot)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ /* NOTE: assumes card detect signal is active-low */
+ return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+}
+
/*
* MMC Slot Initialization.
*/
/*
* Sets the MMC voltage in twl4030
*/
+
+#define MMC1_OCR (MMC_VDD_165_195 \
+ |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
+#define MMC2_OCR (MMC_VDD_165_195 \
+ |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
+ |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
+
static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
{
int ret;
- u8 vmmc, dev_grp_val;
-
- switch (1 << vdd) {
- case MMC_VDD_35_36:
- case MMC_VDD_34_35:
- case MMC_VDD_33_34:
- case MMC_VDD_32_33:
- case MMC_VDD_31_32:
- case MMC_VDD_30_31:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
- vmmc = VMMC1_315V;
- else
- vmmc = VMMC2_315V;
- break;
- case MMC_VDD_29_30:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
- vmmc = VMMC1_315V;
- else
- vmmc = VMMC2_300V;
- break;
- case MMC_VDD_27_28:
- case MMC_VDD_26_27:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
- vmmc = VMMC1_285V;
- else
- vmmc = VMMC2_285V;
- break;
- case MMC_VDD_25_26:
- case MMC_VDD_24_25:
- case MMC_VDD_23_24:
- case MMC_VDD_22_23:
- case MMC_VDD_21_22:
- case MMC_VDD_20_21:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
- vmmc = VMMC1_285V;
- else
- vmmc = VMMC2_260V;
- break;
- case MMC_VDD_165_195:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+ u8 vmmc = 0, dev_grp_val;
+
+ if (!vdd)
+ goto doit;
+
+ if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
+ /* VMMC1: max 220 mA. And for 8-bit mode,
+ * VSIM: max 50 mA
+ */
+ switch (1 << vdd) {
+ case MMC_VDD_165_195:
vmmc = VMMC1_185V;
- else
+ /* and VSIM_180V */
+ break;
+ case MMC_VDD_28_29:
+ vmmc = VMMC1_285V;
+ /* and VSIM_280V */
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ vmmc = VMMC1_300V;
+ /* and VSIM_300V */
+ break;
+ case MMC_VDD_31_32:
+ vmmc = VMMC1_315V;
+ /* error if VSIM needed */
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
+ /* VMMC2: max 100 mA */
+ switch (1 << vdd) {
+ case MMC_VDD_165_195:
vmmc = VMMC2_185V;
- break;
- default:
- vmmc = 0;
- break;
+ break;
+ case MMC_VDD_25_26:
+ case MMC_VDD_26_27:
+ vmmc = VMMC2_260V;
+ break;
+ case MMC_VDD_27_28:
+ vmmc = VMMC2_280V;
+ break;
+ case MMC_VDD_28_29:
+ vmmc = VMMC2_285V;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ vmmc = VMMC2_300V;
+ break;
+ case MMC_VDD_31_32:
+ vmmc = VMMC2_315V;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ return -EINVAL;
}
- if (vmmc)
+doit:
+ if (vdd)
dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
else
dev_grp_val = LDO_CLR; /* Power down */
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
dev_grp_val, c->twl_vmmc_dev_grp);
- if (ret)
+ if (ret || !vdd)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
struct twl_mmc_controller *c = &hsmmc[0];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /*
+ * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+ * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+ * 1.8V and 3.0V modes, controlled by the PBIAS register.
+ *
+ * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+ * is most naturally TWL VSIM; those pins also use PBIAS.
+ */
if (power_on) {
if (cpu_is_omap2430()) {
reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /*
+ * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+ * VDDS is used to power the pins, optionally with a transceiver to
+ * support cards using voltages other than VDDS (1.8V nominal). When a
+ * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+ */
if (power_on) {
if (mmc->slots[0].internal_clock) {
u32 reg;
return ret;
}
+static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ /*
+ * Assume MMC3 has self-powered device connected, for example on-board
+ * chip with external power source.
+ */
+ return 0;
+}
+
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
return;
}
- sprintf(twl->name, "mmc%islot%i", c->mmc, 1);
+ if (c->name)
+ strncpy(twl->name, c->name, HSMMC_NAME_LEN);
+ else
+ snprintf(twl->name, ARRAY_SIZE(twl->name),
+ "mmc%islot%i", c->mmc, 1);
mmc->slots[0].name = twl->name;
mmc->nr_slots = 1;
- mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
- MMC_VDD_26_27 | MMC_VDD_27_28 |
- MMC_VDD_29_30 |
- MMC_VDD_30_31 | MMC_VDD_31_32;
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
mmc->slots[0].switch_pin = c->gpio_cd;
mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
- mmc->slots[0].card_detect = twl_mmc_card_detect;
+ if (c->cover_only)
+ mmc->slots[0].get_cover_state = twl_mmc_get_cover_state;
+ else
+ mmc->slots[0].card_detect = twl_mmc_card_detect;
} else
mmc->slots[0].switch_pin = -EINVAL;
/* NOTE: we assume OMAP's MMC1 and MMC2 use
* the TWL4030's VMMC1 and VMMC2, respectively;
- * and that OMAP's MMC3 isn't used.
+ * and that MMC3 device has it's own power source.
*/
switch (c->mmc) {
case 1:
mmc->slots[0].set_power = twl_mmc1_set_power;
+ mmc->slots[0].ocr_mask = MMC1_OCR;
break;
case 2:
mmc->slots[0].set_power = twl_mmc2_set_power;
+ if (c->transceiver)
+ mmc->slots[0].ocr_mask = MMC2_OCR;
+ else
+ mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+ break;
+ case 3:
+ mmc->slots[0].set_power = twl_mmc3_set_power;
+ mmc->slots[0].ocr_mask = MMC_VDD_165_195;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
+ kfree(mmc);
continue;
}
hsmmc_data[c->mmc - 1] = mmc;
}
omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+
+ /* pass the device nodes back to board setup code */
+ for (c = controllers; c->mmc; c++) {
+ struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+ if (!c->mmc || c->mmc > nr_hsmmc)
+ continue;
+ c->dev = mmc->dev;
+ }
}
#endif
struct twl4030_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u8 wires; /* 1/4/8 wires */
+ bool transceiver; /* MMC-2 option */
+ bool ext_clock; /* use external pin for input clock */
+ bool cover_only; /* No card detect - just cover switch */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
- int ext_clock:1; /* use external pin for input clock */
+ char *name; /* or NULL for default */
+ struct device *dev; /* returned: pointer to mmc adapter */
};
#if defined(CONFIG_TWL4030_CORE) && \
/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
+ * (Always specify PIN_INPUT, except for names suffixed by "_OUT".)
* No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
*/
+MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
};
.valid = suspend_valid_only_mem,
};
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
{
return 0;
}
&iva2_pwrdm,
&mpu_34xx_pwrdm,
&neon_pwrdm,
- &core_34xx_pwrdm,
+ &core_34xx_pre_es3_1_pwrdm,
+ &core_34xx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
&emu_pwrdm,
&sgx_pwrdm,
&usbhost_pwrdm,
+ &dpll1_pwrdm,
+ &dpll2_pwrdm,
+ &dpll3_pwrdm,
+ &dpll4_pwrdm,
+ &dpll5_pwrdm,
#endif
NULL
};
/* No wkdeps or sleepdeps for 34xx core apparently */
-static struct powerdomain core_34xx_pwrdm = {
+static struct powerdomain core_34xx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
+ CHIP_IS_OMAP3430ES2 |
+ CHIP_IS_OMAP3430ES3_0),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .banks = 2,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
+ [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+ },
+};
+
+/* No wkdeps or sleepdeps for 34xx core apparently */
+static struct powerdomain core_34xx_es3_1_pwrdm = {
+ .name = "core_pwrdm",
+ .prcm_offs = CORE_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1),
.pwrsts = PWRSTS_OFF_RET_ON,
.dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
},
};
+/*
+ * Although the 34XX TRM Rev K Table 4-371 notes that retention is a
+ * possible SGX powerstate, the SGX device itself does not support
+ * retention.
+ */
static struct powerdomain sgx_pwrdm = {
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.wkdep_srcs = gfx_sgx_wkdeps,
.sleepdep_srcs = cam_gfx_sleepdeps,
/* XXX This is accurate for 3430 SGX, but what about GFX? */
- .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
.banks = 1,
.pwrsts_mem_ret = {
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.wkdep_srcs = per_usbhost_wkdeps,
.sleepdep_srcs = dss_per_usbhost_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
+ .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
},
};
+static struct powerdomain dpll1_pwrdm = {
+ .name = "dpll1_pwrdm",
+ .prcm_offs = MPU_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll2_pwrdm = {
+ .name = "dpll2_pwrdm",
+ .prcm_offs = OMAP3430_IVA2_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll3_pwrdm = {
+ .name = "dpll3_pwrdm",
+ .prcm_offs = PLL_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll4_pwrdm = {
+ .name = "dpll4_pwrdm",
+ .prcm_offs = PLL_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll5_pwrdm = {
+ .name = "dpll5_pwrdm",
+ .prcm_offs = PLL_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+};
+
+
#endif /* CONFIG_ARCH_OMAP34XX */
#define OMAP2430_EN_USBHS (1 << 6)
/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
-#define OMAP2420_ST_MMC (1 << 26)
-#define OMAP24XX_ST_UART2 (1 << 22)
-#define OMAP24XX_ST_UART1 (1 << 21)
-#define OMAP24XX_ST_MCSPI2 (1 << 18)
-#define OMAP24XX_ST_MCSPI1 (1 << 17)
-#define OMAP24XX_ST_GPT12 (1 << 14)
-#define OMAP24XX_ST_GPT11 (1 << 13)
-#define OMAP24XX_ST_GPT10 (1 << 12)
-#define OMAP24XX_ST_GPT9 (1 << 11)
-#define OMAP24XX_ST_GPT8 (1 << 10)
-#define OMAP24XX_ST_GPT7 (1 << 9)
-#define OMAP24XX_ST_GPT6 (1 << 8)
-#define OMAP24XX_ST_GPT5 (1 << 7)
-#define OMAP24XX_ST_GPT4 (1 << 6)
-#define OMAP24XX_ST_GPT3 (1 << 5)
-#define OMAP24XX_ST_GPT2 (1 << 4)
-#define OMAP2420_ST_VLYNQ (1 << 3)
+#define OMAP2420_ST_MMC_SHIFT 26
+#define OMAP2420_ST_MMC_MASK (1 << 26)
+#define OMAP24XX_ST_UART2_SHIFT 22
+#define OMAP24XX_ST_UART2_MASK (1 << 22)
+#define OMAP24XX_ST_UART1_SHIFT 21
+#define OMAP24XX_ST_UART1_MASK (1 << 21)
+#define OMAP24XX_ST_MCSPI2_SHIFT 18
+#define OMAP24XX_ST_MCSPI2_MASK (1 << 18)
+#define OMAP24XX_ST_MCSPI1_SHIFT 17
+#define OMAP24XX_ST_MCSPI1_MASK (1 << 17)
+#define OMAP24XX_ST_GPT12_SHIFT 14
+#define OMAP24XX_ST_GPT12_MASK (1 << 14)
+#define OMAP24XX_ST_GPT11_SHIFT 13
+#define OMAP24XX_ST_GPT11_MASK (1 << 13)
+#define OMAP24XX_ST_GPT10_SHIFT 12
+#define OMAP24XX_ST_GPT10_MASK (1 << 12)
+#define OMAP24XX_ST_GPT9_SHIFT 11
+#define OMAP24XX_ST_GPT9_MASK (1 << 11)
+#define OMAP24XX_ST_GPT8_SHIFT 10
+#define OMAP24XX_ST_GPT8_MASK (1 << 10)
+#define OMAP24XX_ST_GPT7_SHIFT 9
+#define OMAP24XX_ST_GPT7_MASK (1 << 9)
+#define OMAP24XX_ST_GPT6_SHIFT 8
+#define OMAP24XX_ST_GPT6_MASK (1 << 8)
+#define OMAP24XX_ST_GPT5_SHIFT 7
+#define OMAP24XX_ST_GPT5_MASK (1 << 7)
+#define OMAP24XX_ST_GPT4_SHIFT 6
+#define OMAP24XX_ST_GPT4_MASK (1 << 6)
+#define OMAP24XX_ST_GPT3_SHIFT 5
+#define OMAP24XX_ST_GPT3_MASK (1 << 5)
+#define OMAP24XX_ST_GPT2_SHIFT 4
+#define OMAP24XX_ST_GPT2_MASK (1 << 4)
+#define OMAP2420_ST_VLYNQ_SHIFT 3
+#define OMAP2420_ST_VLYNQ_MASK (1 << 3)
/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
-#define OMAP2430_ST_MDM_INTC (1 << 11)
-#define OMAP2430_ST_GPIO5 (1 << 10)
-#define OMAP2430_ST_MCSPI3 (1 << 9)
-#define OMAP2430_ST_MMCHS2 (1 << 8)
-#define OMAP2430_ST_MMCHS1 (1 << 7)
-#define OMAP2430_ST_USBHS (1 << 6)
-#define OMAP24XX_ST_UART3 (1 << 2)
-#define OMAP24XX_ST_USB (1 << 0)
+#define OMAP2430_ST_MDM_INTC_SHIFT 11
+#define OMAP2430_ST_MDM_INTC_MASK (1 << 11)
+#define OMAP2430_ST_GPIO5_SHIFT 10
+#define OMAP2430_ST_GPIO5_MASK (1 << 10)
+#define OMAP2430_ST_MCSPI3_SHIFT 9
+#define OMAP2430_ST_MCSPI3_MASK (1 << 9)
+#define OMAP2430_ST_MMCHS2_SHIFT 8
+#define OMAP2430_ST_MMCHS2_MASK (1 << 8)
+#define OMAP2430_ST_MMCHS1_SHIFT 7
+#define OMAP2430_ST_MMCHS1_MASK (1 << 7)
+#define OMAP2430_ST_USBHS_SHIFT 6
+#define OMAP2430_ST_USBHS_MASK (1 << 6)
+#define OMAP24XX_ST_UART3_SHIFT 2
+#define OMAP24XX_ST_UART3_MASK (1 << 2)
+#define OMAP24XX_ST_USB_SHIFT 0
+#define OMAP24XX_ST_USB_MASK (1 << 0)
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP24XX_EN_GPIOS_SHIFT 2
#define OMAP24XX_EN_GPT1 (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS (1 << 2)
-#define OMAP24XX_ST_GPT1 (1 << 0)
+#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
+#define OMAP24XX_ST_GPIOS_MASK 2
+#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
+#define OMAP24XX_ST_GPT1_MASK 0
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM (1 << 0)
+#define OMAP2430_ST_MDM_SHIFT (1 << 0)
/* 3430 register bits shared between CM & PRM registers */
#define OMAP3430_EN_HSOTGUSB_SHIFT 4
/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
-#define OMAP3430_ST_MMC2 (1 << 25)
-#define OMAP3430_ST_MMC1 (1 << 24)
-#define OMAP3430_ST_MCSPI4 (1 << 21)
-#define OMAP3430_ST_MCSPI3 (1 << 20)
-#define OMAP3430_ST_MCSPI2 (1 << 19)
-#define OMAP3430_ST_MCSPI1 (1 << 18)
-#define OMAP3430_ST_I2C3 (1 << 17)
-#define OMAP3430_ST_I2C2 (1 << 16)
-#define OMAP3430_ST_I2C1 (1 << 15)
-#define OMAP3430_ST_UART2 (1 << 14)
-#define OMAP3430_ST_UART1 (1 << 13)
-#define OMAP3430_ST_GPT11 (1 << 12)
-#define OMAP3430_ST_GPT10 (1 << 11)
-#define OMAP3430_ST_MCBSP5 (1 << 10)
-#define OMAP3430_ST_MCBSP1 (1 << 9)
-#define OMAP3430_ST_FSHOSTUSB (1 << 5)
-#define OMAP3430_ST_HSOTGUSB (1 << 4)
-#define OMAP3430_ST_D2D (1 << 3)
+#define OMAP3430_ST_MMC2_SHIFT 25
+#define OMAP3430_ST_MMC2_MASK (1 << 25)
+#define OMAP3430_ST_MMC1_SHIFT 24
+#define OMAP3430_ST_MMC1_MASK (1 << 24)
+#define OMAP3430_ST_MCSPI4_SHIFT 21
+#define OMAP3430_ST_MCSPI4_MASK (1 << 21)
+#define OMAP3430_ST_MCSPI3_SHIFT 20
+#define OMAP3430_ST_MCSPI3_MASK (1 << 20)
+#define OMAP3430_ST_MCSPI2_SHIFT 19
+#define OMAP3430_ST_MCSPI2_MASK (1 << 19)
+#define OMAP3430_ST_MCSPI1_SHIFT 18
+#define OMAP3430_ST_MCSPI1_MASK (1 << 18)
+#define OMAP3430_ST_I2C3_SHIFT 17
+#define OMAP3430_ST_I2C3_MASK (1 << 17)
+#define OMAP3430_ST_I2C2_SHIFT 16
+#define OMAP3430_ST_I2C2_MASK (1 << 16)
+#define OMAP3430_ST_I2C1_SHIFT 15
+#define OMAP3430_ST_I2C1_MASK (1 << 15)
+#define OMAP3430_ST_UART2_SHIFT 14
+#define OMAP3430_ST_UART2_MASK (1 << 14)
+#define OMAP3430_ST_UART1_SHIFT 13
+#define OMAP3430_ST_UART1_MASK (1 << 13)
+#define OMAP3430_ST_GPT11_SHIFT 12
+#define OMAP3430_ST_GPT11_MASK (1 << 12)
+#define OMAP3430_ST_GPT10_SHIFT 11
+#define OMAP3430_ST_GPT10_MASK (1 << 11)
+#define OMAP3430_ST_MCBSP5_SHIFT 10
+#define OMAP3430_ST_MCBSP5_MASK (1 << 10)
+#define OMAP3430_ST_MCBSP1_SHIFT 9
+#define OMAP3430_ST_MCBSP1_MASK (1 << 9)
+#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT 5
+#define OMAP3430ES1_ST_FSHOSTUSB_MASK (1 << 5)
+#define OMAP3430ES1_ST_HSOTGUSB_SHIFT 4
+#define OMAP3430ES1_ST_HSOTGUSB_MASK (1 << 4)
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK (1 << 5)
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT 4
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK (1 << 4)
+#define OMAP3430_ST_D2D_SHIFT 3
+#define OMAP3430_ST_D2D_MASK (1 << 3)
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP3430_EN_GPIO1 (1 << 3)
#define OMAP3430_EN_GPT12_SHIFT 1
/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
-#define OMAP3430_ST_SR2 (1 << 7)
-#define OMAP3430_ST_SR1 (1 << 6)
-#define OMAP3430_ST_GPIO1 (1 << 3)
-#define OMAP3430_ST_GPT12 (1 << 1)
-#define OMAP3430_ST_GPT1 (1 << 0)
+#define OMAP3430_ST_SR2_SHIFT 7
+#define OMAP3430_ST_SR2_MASK (1 << 7)
+#define OMAP3430_ST_SR1_SHIFT 6
+#define OMAP3430_ST_SR1_MASK (1 << 6)
+#define OMAP3430_ST_GPIO1_SHIFT 3
+#define OMAP3430_ST_GPIO1_MASK (1 << 3)
+#define OMAP3430_ST_GPT12_SHIFT 1
+#define OMAP3430_ST_GPT12_MASK (1 << 1)
+#define OMAP3430_ST_GPT1_SHIFT 0
+#define OMAP3430_ST_GPT1_MASK (1 << 0)
/*
* CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
#define OMAP3430_EN_MCBSP2_SHIFT 0
/* CM_IDLEST_PER, PM_WKST_PER shared bits */
-#define OMAP3430_ST_GPIO6 (1 << 17)
-#define OMAP3430_ST_GPIO5 (1 << 16)
-#define OMAP3430_ST_GPIO4 (1 << 15)
-#define OMAP3430_ST_GPIO3 (1 << 14)
-#define OMAP3430_ST_GPIO2 (1 << 13)
-#define OMAP3430_ST_UART3 (1 << 11)
-#define OMAP3430_ST_GPT9 (1 << 10)
-#define OMAP3430_ST_GPT8 (1 << 9)
-#define OMAP3430_ST_GPT7 (1 << 8)
-#define OMAP3430_ST_GPT6 (1 << 7)
-#define OMAP3430_ST_GPT5 (1 << 6)
-#define OMAP3430_ST_GPT4 (1 << 5)
-#define OMAP3430_ST_GPT3 (1 << 4)
-#define OMAP3430_ST_GPT2 (1 << 3)
+#define OMAP3430_ST_GPIO6_SHIFT 17
+#define OMAP3430_ST_GPIO6_MASK (1 << 17)
+#define OMAP3430_ST_GPIO5_SHIFT 16
+#define OMAP3430_ST_GPIO5_MASK (1 << 16)
+#define OMAP3430_ST_GPIO4_SHIFT 15
+#define OMAP3430_ST_GPIO4_MASK (1 << 15)
+#define OMAP3430_ST_GPIO3_SHIFT 14
+#define OMAP3430_ST_GPIO3_MASK (1 << 14)
+#define OMAP3430_ST_GPIO2_SHIFT 13
+#define OMAP3430_ST_GPIO2_MASK (1 << 13)
+#define OMAP3430_ST_UART3_SHIFT 11
+#define OMAP3430_ST_UART3_MASK (1 << 11)
+#define OMAP3430_ST_GPT9_SHIFT 10
+#define OMAP3430_ST_GPT9_MASK (1 << 10)
+#define OMAP3430_ST_GPT8_SHIFT 9
+#define OMAP3430_ST_GPT8_MASK (1 << 9)
+#define OMAP3430_ST_GPT7_SHIFT 8
+#define OMAP3430_ST_GPT7_MASK (1 << 8)
+#define OMAP3430_ST_GPT6_SHIFT 7
+#define OMAP3430_ST_GPT6_MASK (1 << 7)
+#define OMAP3430_ST_GPT5_SHIFT 6
+#define OMAP3430_ST_GPT5_MASK (1 << 6)
+#define OMAP3430_ST_GPT4_SHIFT 5
+#define OMAP3430_ST_GPT4_MASK (1 << 5)
+#define OMAP3430_ST_GPT3_SHIFT 4
+#define OMAP3430_ST_GPT3_MASK (1 << 4)
+#define OMAP3430_ST_GPT2_SHIFT 3
+#define OMAP3430_ST_GPT2_MASK (1 << 3)
/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
#define OMAP3430_EN_CORE_SHIFT 0
/* PM_WKEN_WKUP specific bits */
#define OMAP3430_EN_IO (1 << 8)
+#define OMAP3430_EN_GPIO1 (1 << 3)
/* PM_MPUGRPSEL_WKUP specific bits */
#define OMAP3430_CMDRA0_MASK (0xff << 0)
/* PRM_VC_CMD_VAL_0 specific bits */
+#define OMAP3430_VC_CMD_ON_SHIFT 24
+#define OMAP3430_VC_CMD_ON_MASK (0xFF << 24)
+#define OMAP3430_VC_CMD_ONLP_SHIFT 16
+#define OMAP3430_VC_CMD_ONLP_MASK (0xFF << 16)
+#define OMAP3430_VC_CMD_RET_SHIFT 8
+#define OMAP3430_VC_CMD_RET_MASK (0xFF << 8)
+#define OMAP3430_VC_CMD_OFF_SHIFT 0
+#define OMAP3430_VC_CMD_OFF_MASK (0xFF << 0)
/* PRM_VC_CMD_VAL_1 specific bits */
#define PM_PWSTCTRL 0x00e0
#define PM_PWSTST 0x00e4
+/* Omap2 specific registers */
+#define OMAP24XX_PM_WKEN2 0x00a4
+#define OMAP24XX_PM_WKST2 0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
+
+/* Omap3 specific registers */
+#define OMAP3430ES2_PM_WKEN3 0x00f0
+#define OMAP3430ES2_PM_WKST3 0x00b8
+
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
-/* Architecture-specific registers */
-
-#define OMAP24XX_PM_WKEN2 0x00a4
-#define OMAP24XX_PM_WKST2 0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
-
#ifndef __ASSEMBLER__
/* Power/reset management domain register get/set */
#define OMAP_RSTTIME1_SHIFT 0
#define OMAP_RSTTIME1_MASK (0xff << 0)
-
/* PRM_RSTCTRL */
/* Named RM_RSTCTRL_WKUP on the 24xx */
/* 2420 calls RST_DPLL3 'RST_DPLL' */
--- /dev/null
+/*
+ * SMS/SDRC (SDRAM controller) common code for OMAP2/3
+ *
+ * Copyright (C) 2005, 2008 Texas Instruments Inc.
+ * Copyright (C) 2005, 2008 Nokia Corporation
+ *
+ * Tony Lindgren <tony@atomide.com>
+ * Paul Walmsley
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+
+#include "prm.h"
+
+#include <mach/sdrc.h>
+#include "sdrc.h"
+
+static struct omap_sdrc_params *sdrc_init_params;
+
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
+
+
+/**
+ * omap2_sdrc_get_params - return SDRC register values for a given clock rate
+ * @r: SDRC clock rate (in Hz)
+ *
+ * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
+ * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
+ * SDRC clock rate 'r'. These parameters control various timing
+ * delays in the SDRAM controller that are expressed in terms of the
+ * number of SDRC clock cycles to wait; hence the clock rate
+ * dependency. Note that sdrc_init_params must be sorted rate
+ * descending. Also assumes that both chip-selects use the same
+ * timing parameters. Returns a struct omap_sdrc_params * upon
+ * success, or NULL upon failure.
+ */
+struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+{
+ struct omap_sdrc_params *sp;
+
+ sp = sdrc_init_params;
+
+ while (sp->rate != r)
+ sp++;
+
+ if (!sp->rate)
+ return NULL;
+
+ return sp;
+}
+
+
+void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+{
+ omap2_sdrc_base = omap2_globals->sdrc;
+ omap2_sms_base = omap2_globals->sms;
+}
+
+/* turn on smart idle modes for SDRAM scheduler and controller */
+void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+{
+ u32 l;
+
+ l = sms_read_reg(SMS_SYSCONFIG);
+ l &= ~(0x3 << 3);
+ l |= (0x2 << 3);
+ sms_write_reg(l, SMS_SYSCONFIG);
+
+ l = sdrc_read_reg(SDRC_SYSCONFIG);
+ l &= ~(0x3 << 3);
+ l |= (0x2 << 3);
+ sdrc_write_reg(l, SDRC_SYSCONFIG);
+
+ sdrc_init_params = sp;
+}
/*
- * linux/arch/arm/mach-omap2/memory.c
+ * linux/arch/arm/mach-omap2/sdrc2xxx.c
*
- * Memory timing related functions for OMAP24XX
+ * SDRAM timing related functions for OMAP2xxx
*
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (C) 2005, 2008 Texas Instruments Inc.
+ * Copyright (C) 2005, 2008 Nokia Corporation
*
- * Copyright (C) 2005 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
+ * Paul Walmsley
+ * Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <mach/sram.h>
#include "prm.h"
-
-#include "memory.h"
+#include "clock.h"
+#include <mach/sdrc.h>
#include "sdrc.h"
-void __iomem *omap2_sdrc_base;
-void __iomem *omap2_sms_base;
+/* Memory timing, DLL mode flags */
+#define M_DDR 1
+#define M_LOCK_CTRL (1 << 2)
+#define M_UNLOCK 0
+#define M_LOCK 1
+
static struct memory_timings mem_timings;
static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
-u32 omap2_memory_get_slow_dll_ctrl(void)
+static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
{
return mem_timings.slow_dll_ctrl;
}
-u32 omap2_memory_get_fast_dll_ctrl(void)
+static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
{
return mem_timings.fast_dll_ctrl;
}
-u32 omap2_memory_get_type(void)
+static u32 omap2xxx_sdrc_get_type(void)
{
return mem_timings.m_type;
}
* Check the DLL lock state, and return tue if running in unlock mode.
* This is needed to compensate for the shifted DLL value in unlock mode.
*/
-u32 omap2_dll_force_needed(void)
+u32 omap2xxx_sdrc_dll_is_unlocked(void)
{
/* dlla and dllb are a set */
u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
* 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
* Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
* CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
+ *
+ * Used by the clock framework during CORE DPLL changes
*/
-u32 omap2_reprogram_sdrc(u32 level, u32 force)
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
{
u32 dll_ctrl, m_type;
u32 prev = curr_perf_level;
if ((curr_perf_level == level) && !force)
return prev;
- if (level == CORE_CLK_SRC_DPLL) {
- dll_ctrl = omap2_memory_get_slow_dll_ctrl();
- } else if (level == CORE_CLK_SRC_DPLL_X2) {
- dll_ctrl = omap2_memory_get_fast_dll_ctrl();
- } else {
+ if (level == CORE_CLK_SRC_DPLL)
+ dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
+ else if (level == CORE_CLK_SRC_DPLL_X2)
+ dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
+ else
return prev;
- }
- m_type = omap2_memory_get_type();
+ m_type = omap2xxx_sdrc_get_type();
local_irq_save(flags);
__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
return prev;
}
-#if !defined(CONFIG_ARCH_OMAP2)
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock)
-{
-}
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type)
-{
-}
-#endif
-
-void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
+/* Used by the clock framework during CORE DPLL changes */
+void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
u32 fast_dll = 0;
- mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+ /* DDR = 1, SDR = 0 */
+ mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
* In the case of 2422, its ok to use CS1 instead of CS0.
/* 90 degree phase for anything below 133Mhz + disable DLL filter */
mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
}
-
-void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
-{
- omap2_sdrc_base = omap2_globals->sdrc;
- omap2_sms_base = omap2_globals->sms;
-}
-
-/* turn on smart idle modes for SDRAM scheduler and controller */
-void __init omap2_init_memory(void)
-{
- u32 l;
-
- if (!cpu_is_omap2420())
- return;
-
- l = sms_read_reg(SMS_SYSCONFIG);
- l &= ~(0x3 << 3);
- l |= (0x2 << 3);
- sms_write_reg(l, SMS_SYSCONFIG);
-
- l = sdrc_read_reg(SDRC_SYSCONFIG);
- l &= ~(0x3 << 3);
- l |= (0x2 << 3);
- sdrc_write_reg(l, SDRC_SYSCONFIG);
-}
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/usb-musb.c
+ *
+ * This file will contain the board specific details for the
+ * MENTOR USB OTG controller on OMAP3430
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Vikram Pandita
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+#include <linux/usb/musb.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+
+static struct resource musb_resources[] = {
+ [0] = { /* start and end set dynamically */
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* general IRQ */
+ .start = INT_243X_HS_USB_MC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = { /* DMA IRQ */
+ .start = INT_243X_HS_USB_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int clk_on;
+
+static int musb_set_clock(struct clk *clk, int state)
+{
+ if (state) {
+ if (clk_on > 0)
+ return -ENODEV;
+
+ clk_enable(clk);
+ clk_on = 1;
+ } else {
+ if (clk_on == 0)
+ return -ENODEV;
+
+ clk_disable(clk);
+ clk_on = 0;
+ }
+
+ return 0;
+}
+
+static struct musb_hdrc_eps_bits musb_eps[] = {
+ { "ep1_tx", 10, },
+ { "ep1_rx", 10, },
+ { "ep2_tx", 9, },
+ { "ep2_rx", 9, },
+ { "ep3_tx", 3, },
+ { "ep3_rx", 3, },
+ { "ep4_tx", 3, },
+ { "ep4_rx", 3, },
+ { "ep5_tx", 3, },
+ { "ep5_rx", 3, },
+ { "ep6_tx", 3, },
+ { "ep6_rx", 3, },
+ { "ep7_tx", 3, },
+ { "ep7_rx", 3, },
+ { "ep8_tx", 2, },
+ { "ep8_rx", 2, },
+ { "ep9_tx", 2, },
+ { "ep9_rx", 2, },
+ { "ep10_tx", 2, },
+ { "ep10_rx", 2, },
+ { "ep11_tx", 2, },
+ { "ep11_rx", 2, },
+ { "ep12_tx", 2, },
+ { "ep12_rx", 2, },
+ { "ep13_tx", 2, },
+ { "ep13_rx", 2, },
+ { "ep14_tx", 2, },
+ { "ep14_rx", 2, },
+ { "ep15_tx", 2, },
+ { "ep15_rx", 2, },
+};
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 16,
+ .dma_channels = 7,
+ .dma_req_chan = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
+ .ram_bits = 12,
+ .eps_bits = musb_eps,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#ifdef CONFIG_USB_MUSB_OTG
+ .mode = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+ .mode = MUSB_PERIPHERAL,
+#endif
+ /* .clock is set dynamically */
+ .set_clock = musb_set_clock,
+ .config = &musb_config,
+
+ /* REVISIT charge pump on TWL4030 can supply up to
+ * 100 mA ... but this value is board-specific, like
+ * "mode", and should be passed to usb_musb_init().
+ */
+ .power = 50, /* up to 100 mA */
+};
+
+static u64 musb_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device musb_device = {
+ .name = "musb_hdrc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &musb_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &musb_plat,
+ },
+ .num_resources = ARRAY_SIZE(musb_resources),
+ .resource = musb_resources,
+};
+
+#ifdef CONFIG_NOP_USB_XCEIV
+static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device nop_xceiv_device = {
+ .name = "nop_usb_xceiv",
+ .id = -1,
+ .dev = {
+ .dma_mask = &nop_xceiv_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = NULL,
+ },
+};
+#endif
+
+void __init usb_musb_init(void)
+{
+ if (cpu_is_omap243x())
+ musb_resources[0].start = OMAP243X_HS_BASE;
+ else
+ musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
+ musb_resources[0].end = musb_resources[0].start + SZ_8K - 1;
+
+ /*
+ * REVISIT: This line can be removed once all the platforms using
+ * musb_core.c have been converted to use use clkdev.
+ */
+ musb_plat.clock = "ick";
+
+#ifdef CONFIG_NOP_USB_XCEIV
+ if (platform_device_register(&nop_xceiv_device) < 0) {
+ printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
+ return;
+ }
+#endif
+
+ if (platform_device_register(&musb_device) < 0) {
+ printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+ return;
+ }
+}
config MACH_TS78XX
bool "Technologic Systems TS-78xx"
+ select PM
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-78xx platform.
static int __init dns323_pci_init(void)
{
- /* The 5182 doesn't really use it's PCI bus, and initialising PCI
+ /* The 5182 doesn't really use its PCI bus, and initialising PCI
* gets in the way of initialising the SATA controller.
*/
if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
orion5x_i2c_init();
orion5x_uart0_init();
- /* The 5182 has it's SATA controller on-chip, and needs it's own little
+ /* The 5182 has its SATA controller on-chip, and needs its own little
* init routine.
*/
if (dns323_dev_id() == MV88F5182_DEV_ID)
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable and issue soft reset
static void lsmini_power_off(void)
{
- arch_reset(0);
+ arch_reset(0, NULL);
}
--- /dev/null
+#define FPGAID(_magic, _rev) ((_magic << 8) + _rev)
+
+/*
+ * get yer id's from http://ts78xx.digriz.org.uk/
+ * do *not* make up your own or 'borrow' any!
+ */
+enum fpga_ids {
+ /* Technologic Systems */
+ TS7800_REV_1 = FPGAID(0x00b480, 0x01),
+ TS7800_REV_2 = FPGAID(0x00b480, 0x02),
+ TS7800_REV_3 = FPGAID(0x00b480, 0x03),
+ TS7800_REV_4 = FPGAID(0x00b480, 0x04),
+ TS7800_REV_5 = FPGAID(0x00b480, 0x05),
+
+ /* Unaffordable & Expensive */
+ UAE_DUMMY = FPGAID(0xffffff, 0x01),
+};
+
+struct fpga_device {
+ unsigned present:1;
+ unsigned init:1;
+};
+
+struct fpga_devices {
+ /* Technologic Systems */
+ struct fpga_device ts_rtc;
+ struct fpga_device ts_nand;
+};
+
+struct ts78xx_fpga_data {
+ unsigned int id;
+ int state;
+
+ struct fpga_devices supports;
+};
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/sysfs.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/m48t86.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
+#include "ts78xx-fpga.h"
/*****************************************************************************
* TS-78xx Info
#define TS78XX_FPGA_REGS_VIRT_BASE 0xff900000
#define TS78XX_FPGA_REGS_SIZE SZ_1M
-#define TS78XX_FPGA_REGS_SYSCON_ID (TS78XX_FPGA_REGS_VIRT_BASE | 0x000)
-#define TS78XX_FPGA_REGS_SYSCON_LCDI (TS78XX_FPGA_REGS_VIRT_BASE | 0x004)
-#define TS78XX_FPGA_REGS_SYSCON_LCDO (TS78XX_FPGA_REGS_VIRT_BASE | 0x008)
-
-#define TS78XX_FPGA_REGS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
-#define TS78XX_FPGA_REGS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
-
-/*
- * 512kB NOR flash Device
- */
-#define TS78XX_NOR_BOOT_BASE 0xff800000
-#define TS78XX_NOR_BOOT_SIZE SZ_512K
+static struct ts78xx_fpga_data ts78xx_fpga = {
+ .id = 0,
+ .state = 1,
+/* .supports = ... - populated by ts78xx_fpga_supports() */
+};
/*****************************************************************************
* I/O Address Mapping
}
/*****************************************************************************
- * 512kB NOR Boot Flash - the chip is a M25P40
+ * Ethernet
****************************************************************************/
-static struct mtd_partition ts78xx_nor_boot_flash_resources[] = {
- {
- .name = "ts-bootrom",
- .offset = 0,
- /* only the first 256kB is used */
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static struct physmap_flash_data ts78xx_nor_boot_flash_data = {
- .width = 1,
- .parts = ts78xx_nor_boot_flash_resources,
- .nr_parts = ARRAY_SIZE(ts78xx_nor_boot_flash_resources),
-};
-
-static struct resource ts78xx_nor_boot_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = TS78XX_NOR_BOOT_BASE,
- .end = TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device ts78xx_nor_boot_flash = {
- .name = "physmap-flash",
- .id = -1,
- .dev = {
- .platform_data = &ts78xx_nor_boot_flash_data,
- },
- .num_resources = 1,
- .resource = &ts78xx_nor_boot_flash_resource,
+static struct mv643xx_eth_platform_data ts78xx_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
/*****************************************************************************
- * Ethernet
+ * SATA
****************************************************************************/
-static struct mv643xx_eth_platform_data ts78xx_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+static struct mv_sata_platform_data ts78xx_sata_data = {
+ .n_ports = 2,
};
/*****************************************************************************
* RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
****************************************************************************/
-#ifdef CONFIG_RTC_DRV_M48T86
-static unsigned char ts78xx_rtc_readbyte(unsigned long addr)
+#define TS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
+#define TS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+
+static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr)
{
- writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
- return readb(TS78XX_FPGA_REGS_RTC_DATA);
+ writeb(addr, TS_RTC_CTRL);
+ return readb(TS_RTC_DATA);
}
-static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr)
+static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr)
{
- writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
- writeb(value, TS78XX_FPGA_REGS_RTC_DATA);
+ writeb(addr, TS_RTC_CTRL);
+ writeb(value, TS_RTC_DATA);
}
-static struct m48t86_ops ts78xx_rtc_ops = {
- .readbyte = ts78xx_rtc_readbyte,
- .writebyte = ts78xx_rtc_writebyte,
+static struct m48t86_ops ts78xx_ts_rtc_ops = {
+ .readbyte = ts78xx_ts_rtc_readbyte,
+ .writebyte = ts78xx_ts_rtc_writebyte,
};
-static struct platform_device ts78xx_rtc_device = {
+static struct platform_device ts78xx_ts_rtc_device = {
.name = "rtc-m48t86",
.id = -1,
.dev = {
- .platform_data = &ts78xx_rtc_ops,
+ .platform_data = &ts78xx_ts_rtc_ops,
},
.num_resources = 0,
};
* TODO: track down a guinea pig without an RTC to see if we can work out a
* better RTC detection routine
*/
-static int __init ts78xx_rtc_init(void)
+static int ts78xx_ts_rtc_load(void)
{
+ int rc;
unsigned char tmp_rtc0, tmp_rtc1;
- tmp_rtc0 = ts78xx_rtc_readbyte(126);
- tmp_rtc1 = ts78xx_rtc_readbyte(127);
-
- ts78xx_rtc_writebyte(0x00, 126);
- ts78xx_rtc_writebyte(0x55, 127);
- if (ts78xx_rtc_readbyte(127) == 0x55) {
- ts78xx_rtc_writebyte(0xaa, 127);
- if (ts78xx_rtc_readbyte(127) == 0xaa
- && ts78xx_rtc_readbyte(126) == 0x00) {
- ts78xx_rtc_writebyte(tmp_rtc0, 126);
- ts78xx_rtc_writebyte(tmp_rtc1, 127);
- platform_device_register(&ts78xx_rtc_device);
- return 1;
+ tmp_rtc0 = ts78xx_ts_rtc_readbyte(126);
+ tmp_rtc1 = ts78xx_ts_rtc_readbyte(127);
+
+ ts78xx_ts_rtc_writebyte(0x00, 126);
+ ts78xx_ts_rtc_writebyte(0x55, 127);
+ if (ts78xx_ts_rtc_readbyte(127) == 0x55) {
+ ts78xx_ts_rtc_writebyte(0xaa, 127);
+ if (ts78xx_ts_rtc_readbyte(127) == 0xaa
+ && ts78xx_ts_rtc_readbyte(126) == 0x00) {
+ ts78xx_ts_rtc_writebyte(tmp_rtc0, 126);
+ ts78xx_ts_rtc_writebyte(tmp_rtc1, 127);
+
+ if (ts78xx_fpga.supports.ts_rtc.init == 0) {
+ rc = platform_device_register(&ts78xx_ts_rtc_device);
+ if (!rc)
+ ts78xx_fpga.supports.ts_rtc.init = 1;
+ } else
+ rc = platform_device_add(&ts78xx_ts_rtc_device);
+
+ return rc;
}
}
- return 0;
+ return -ENODEV;
};
-#else
-static int __init ts78xx_rtc_init(void)
+
+static void ts78xx_ts_rtc_unload(void)
{
- return 0;
+ platform_device_del(&ts78xx_ts_rtc_device);
}
-#endif
/*****************************************************************************
- * SATA
+ * NAND Flash
****************************************************************************/
-static struct mv_sata_platform_data ts78xx_sata_data = {
- .n_ports = 2,
+#define TS_NAND_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x800) /* VIRT */
+#define TS_NAND_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x804) /* PHYS */
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 0
+ */
+static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char bits;
+
+ bits = (ctrl & NAND_NCE) << 2;
+ bits |= ctrl & NAND_CLE;
+ bits |= (ctrl & NAND_ALE) >> 2;
+
+ writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
+}
+
+static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
+{
+ return readb(TS_NAND_CTRL) & 0x20;
+}
+
+const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition ts78xx_ts_nand_parts[] = {
+ {
+ .name = "mbr",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ }, {
+ .name = "initrd",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
};
+static struct platform_nand_data ts78xx_ts_nand_data = {
+ .chip = {
+ .part_probe_types = ts_nand_part_probes,
+ .partitions = ts78xx_ts_nand_parts,
+ .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
+ .chip_delay = 15,
+ .options = NAND_USE_FLASH_BBT,
+ },
+ .ctrl = {
+ /*
+ * The HW ECC offloading functions, used to give about a 9%
+ * performance increase for 'dd if=/dev/mtdblockX' and 5% for
+ * nanddump. This all however was changed by git commit
+ * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is
+ * no performance advantage to be had so we no longer bother
+ */
+ .cmd_ctrl = ts78xx_ts_nand_cmd_ctrl,
+ .dev_ready = ts78xx_ts_nand_dev_ready,
+ },
+};
+
+static struct resource ts78xx_ts_nand_resources = {
+ .start = TS_NAND_DATA,
+ .end = TS_NAND_DATA + 4,
+ .flags = IORESOURCE_IO,
+};
+
+static struct platform_device ts78xx_ts_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts78xx_ts_nand_data,
+ },
+ .resource = &ts78xx_ts_nand_resources,
+ .num_resources = 1,
+};
+
+static int ts78xx_ts_nand_load(void)
+{
+ int rc;
+
+ if (ts78xx_fpga.supports.ts_nand.init == 0) {
+ rc = platform_device_register(&ts78xx_ts_nand_device);
+ if (!rc)
+ ts78xx_fpga.supports.ts_nand.init = 1;
+ } else
+ rc = platform_device_add(&ts78xx_ts_nand_device);
+
+ return rc;
+};
+
+static void ts78xx_ts_nand_unload(void)
+{
+ platform_device_del(&ts78xx_ts_nand_device);
+}
+
/*****************************************************************************
- * print some information regarding the board
+ * FPGA 'hotplug' support code
****************************************************************************/
-static void __init ts78xx_print_board_id(void)
+static void ts78xx_fpga_devices_zero_init(void)
{
- unsigned int board_info;
-
- board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID);
- printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ",
- board_info & 0xff,
- (board_info >> 8) & 0xffffff);
- board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI);
- printk("JP1=%d, JP2=%d\n",
- (board_info >> 30) & 0x1,
- (board_info >> 31) & 0x1);
+ ts78xx_fpga.supports.ts_rtc.init = 0;
+ ts78xx_fpga.supports.ts_nand.init = 0;
+}
+
+static void ts78xx_fpga_supports(void)
+{
+ /* TODO: put this 'table' into ts78xx-fpga.h */
+ switch (ts78xx_fpga.id) {
+ case TS7800_REV_1:
+ case TS7800_REV_2:
+ case TS7800_REV_3:
+ case TS7800_REV_4:
+ case TS7800_REV_5:
+ ts78xx_fpga.supports.ts_rtc.present = 1;
+ ts78xx_fpga.supports.ts_nand.present = 1;
+ break;
+ default:
+ ts78xx_fpga.supports.ts_rtc.present = 0;
+ ts78xx_fpga.supports.ts_nand.present = 0;
+ }
+}
+
+static int ts78xx_fpga_load_devices(void)
+{
+ int tmp, ret = 0;
+
+ if (ts78xx_fpga.supports.ts_rtc.present == 1) {
+ tmp = ts78xx_ts_rtc_load();
+ if (tmp) {
+ printk(KERN_INFO "TS-78xx: RTC not registered\n");
+ ts78xx_fpga.supports.ts_rtc.present = 0;
+ }
+ ret |= tmp;
+ }
+ if (ts78xx_fpga.supports.ts_nand.present == 1) {
+ tmp = ts78xx_ts_nand_load();
+ if (tmp) {
+ printk(KERN_INFO "TS-78xx: NAND not registered\n");
+ ts78xx_fpga.supports.ts_nand.present = 0;
+ }
+ ret |= tmp;
+ }
+
+ return ret;
+}
+
+static int ts78xx_fpga_unload_devices(void)
+{
+ int ret = 0;
+
+ if (ts78xx_fpga.supports.ts_rtc.present == 1)
+ ts78xx_ts_rtc_unload();
+ if (ts78xx_fpga.supports.ts_nand.present == 1)
+ ts78xx_ts_nand_unload();
+
+ return ret;
+}
+
+static int ts78xx_fpga_load(void)
+{
+ ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+ printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+ (ts78xx_fpga.id >> 8) & 0xffffff,
+ ts78xx_fpga.id & 0xff);
+
+ ts78xx_fpga_supports();
+
+ if (ts78xx_fpga_load_devices()) {
+ ts78xx_fpga.state = -1;
+ return -EBUSY;
+ }
+
+ return 0;
};
+static int ts78xx_fpga_unload(void)
+{
+ unsigned int fpga_id;
+
+ fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+ /*
+ * There does not seem to be a feasible way to block access to the GPIO
+ * pins from userspace (/dev/mem). This if clause should hopefully warn
+ * those foolish enough not to follow 'policy' :)
+ *
+ * UrJTAG SVN since r1381 can be used to reprogram the FPGA
+ */
+ if (ts78xx_fpga.id != fpga_id) {
+ printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n"
+ "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
+ (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
+ (fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
+ ts78xx_fpga.state = -1;
+ return -EBUSY;
+ }
+
+ if (ts78xx_fpga_unload_devices()) {
+ ts78xx_fpga.state = -1;
+ return -EBUSY;
+ }
+
+ return 0;
+};
+
+static ssize_t ts78xx_fpga_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ if (ts78xx_fpga.state < 0)
+ return sprintf(buf, "borked\n");
+
+ return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline");
+}
+
+static ssize_t ts78xx_fpga_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buf, size_t n)
+{
+ int value, ret;
+
+ if (ts78xx_fpga.state < 0) {
+ printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+ return -EBUSY;
+ }
+
+ if (strncmp(buf, "online", sizeof("online") - 1) == 0)
+ value = 1;
+ else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
+ value = 0;
+ else {
+ printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+ return -EINVAL;
+ }
+
+ if (ts78xx_fpga.state == value)
+ return n;
+
+ ret = (ts78xx_fpga.state == 0)
+ ? ts78xx_fpga_load()
+ : ts78xx_fpga_unload();
+
+ if (!(ret < 0))
+ ts78xx_fpga.state = value;
+
+ return n;
+}
+
+static struct kobj_attribute ts78xx_fpga_attr =
+ __ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store);
+
/*****************************************************************************
* General Setup
****************************************************************************/
{ 17, MPP_UART },
{ 18, MPP_UART },
{ 19, MPP_UART },
+ /*
+ * MPP[20] PCI Clock Out 1
+ * MPP[21] PCI Clock Out 0
+ * MPP[22] Unused
+ * MPP[23] Unused
+ * MPP[24] Unused
+ * MPP[25] Unused
+ */
{ -1 },
};
static void __init ts78xx_init(void)
{
+ int ret;
+
/*
* Setup basic Orion functions. Need to be called early.
*/
orion5x_init();
- ts78xx_print_board_id();
-
orion5x_mpp_conf(ts78xx_mpp_modes);
- /*
- * MPP[20] PCI Clock Out 1
- * MPP[21] PCI Clock Out 0
- * MPP[22] Unused
- * MPP[23] Unused
- * MPP[24] Unused
- * MPP[25] Unused
- */
-
/*
* Configure peripherals.
*/
orion5x_uart1_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
- TS78XX_NOR_BOOT_SIZE);
- platform_device_register(&ts78xx_nor_boot_flash);
-
- if (!ts78xx_rtc_init())
- printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+ /* FPGA init */
+ ts78xx_fpga_devices_zero_init();
+ ret = ts78xx_fpga_load();
+ ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
+ if (ret)
+ printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
}
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
+config GUMSTIX_AM300EPD
+ bool "Enable AM300EPD board support"
+
endchoice
config MACH_INTELMOTE2
bool "CompuLab EM-x270 platform"
select PXA27x
+config MACH_EXEDA
+ bool "CompuLab eXeda platform"
+ select PXA27x
+
config MACH_COLIBRI
- bool "Toradex Colibri PX27x"
+ bool "Toradex Colibri PXA270"
select PXA27x
+config MACH_COLIBRI300
+ bool "Toradex Colibri PXA300/310"
+ select PXA3xx
+ select CPU_PXA300
+
+config MACH_COLIBRI320
+ bool "Toradex Colibri PXA320"
+ select PXA3xx
+ select CPU_PXA320
+
config MACH_ZYLONITE
bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
+ select PXA_SSP
+ select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_HIMALAYA
+ bool "HTC Himalaya Support"
+ select CPU_PXA26x
+ select FB_W100
+
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
bool "PXA based Palm PDAs"
select HAVE_PWM
+config MACH_PALMT5
+ bool "Palm Tungsten|T5"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+ handheld computer.
+
config MACH_PALMTX
bool "Palm T|X"
default y
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
+config MACH_PALMLD
+ bool "Palm LifeDrive"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm LifeDrive
+ handheld computer.
+
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
endchoice
+config MACH_CSB726
+ bool "Enable Cogent CSB726 System On a Module"
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Cogent
+ CSB726 System On Module.
+
+config CSB726_CSB701
+ bool "Enable supprot for CSB701 baseboard"
+ depends on MACH_CSB726
+
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
#
# Common support (must be linked before board specific support)
-obj-y += clock.o devices.o generic.o irq.o dma.o \
- time.o gpio.o reset.o
+obj-y += clock.o devices.o generic.o irq.o \
+ time.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
ifeq ($(CONFIG_CPU_FREQ),y)
# Specific board support
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
-obj-$(CONFIG_MACH_COLIBRI) += colibri.o
+obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
+obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
+obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
+obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
+obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
+obj-$(CONFIG_MACH_CSB726) += csb726.o
+obj-$(CONFIG_CSB726_CSB701) += csb701.o
# Support for blinky lights
led-y := leds.o
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <mach/pxa25x.h>
#include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/pxafb.h>
#include "generic.h"
--- /dev/null
+/*
+ * am300epd.c -- Platform device for AM300 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+
+#include <video/broadsheetfb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am300_device;
+static struct broadsheet_board am300_board;
+
+static unsigned long am300_pin_config[] __initdata = {
+ GPIO16_GPIO,
+ GPIO17_GPIO,
+ GPIO32_GPIO,
+ GPIO48_GPIO,
+ GPIO49_GPIO,
+ GPIO51_GPIO,
+ GPIO74_GPIO,
+ GPIO75_GPIO,
+ GPIO76_GPIO,
+ GPIO77_GPIO,
+
+ /* this is the 16-bit hdb bus 58-73 */
+ GPIO58_GPIO,
+ GPIO59_GPIO,
+ GPIO60_GPIO,
+ GPIO61_GPIO,
+
+ GPIO62_GPIO,
+ GPIO63_GPIO,
+ GPIO64_GPIO,
+ GPIO65_GPIO,
+
+ GPIO66_GPIO,
+ GPIO67_GPIO,
+ GPIO68_GPIO,
+ GPIO69_GPIO,
+
+ GPIO70_GPIO,
+ GPIO71_GPIO,
+ GPIO72_GPIO,
+ GPIO73_GPIO,
+};
+
+/* register offsets for gpio control */
+#define PWR_GPIO_PIN 16
+#define CFG_GPIO_PIN 17
+#define RDY_GPIO_PIN 32
+#define DC_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define LED_GPIO_PIN 51
+#define RD_GPIO_PIN 74
+#define WR_GPIO_PIN 75
+#define CS_GPIO_PIN 76
+#define IRQ_GPIO_PIN 77
+
+/* hdb bus */
+#define DB0_GPIO_PIN 58
+#define DB15_GPIO_PIN 73
+
+static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
+ RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
+ IRQ_GPIO_PIN, LED_GPIO_PIN };
+static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
+ "CS", "IRQ", "LED" };
+
+static int am300_wait_event(struct broadsheetfb_par *par)
+{
+ /* todo: improve err recovery */
+ wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
+ return 0;
+}
+
+static int am300_init_gpio_regs(struct broadsheetfb_par *par)
+{
+ int i;
+ int err;
+ char dbname[8];
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ err = gpio_request(gpios[i], gpio_names[i]);
+ if (err) {
+ dev_err(&am300_device->dev, "failed requesting "
+ "gpio %s, err=%d\n", gpio_names[i], err);
+ goto err_req_gpio;
+ }
+ }
+
+ /* we also need to take care of the hdb bus */
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
+ sprintf(dbname, "DB%d", i);
+ err = gpio_request(i, dbname);
+ if (err) {
+ dev_err(&am300_device->dev, "failed requesting "
+ "gpio %d, err=%d\n", i, err);
+ while (i >= DB0_GPIO_PIN)
+ gpio_free(i--);
+ i = ARRAY_SIZE(gpios) - 1;
+ goto err_req_gpio;
+ }
+ }
+
+ /* setup the outputs and init values */
+ gpio_direction_output(PWR_GPIO_PIN, 0);
+ gpio_direction_output(CFG_GPIO_PIN, 1);
+ gpio_direction_output(DC_GPIO_PIN, 0);
+ gpio_direction_output(RD_GPIO_PIN, 1);
+ gpio_direction_output(WR_GPIO_PIN, 1);
+ gpio_direction_output(CS_GPIO_PIN, 1);
+ gpio_direction_output(RST_GPIO_PIN, 0);
+
+ /* setup the inputs */
+ gpio_direction_input(RDY_GPIO_PIN);
+ gpio_direction_input(IRQ_GPIO_PIN);
+
+ /* start the hdb bus as an input */
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+ gpio_direction_output(i, 0);
+
+ /* go into command mode */
+ gpio_set_value(CFG_GPIO_PIN, 1);
+ gpio_set_value(RST_GPIO_PIN, 0);
+ msleep(10);
+ gpio_set_value(RST_GPIO_PIN, 1);
+ msleep(10);
+ am300_wait_event(par);
+
+ return 0;
+
+err_req_gpio:
+ while (i > 0)
+ gpio_free(gpios[i--]);
+
+ return err;
+}
+
+static int am300_init_board(struct broadsheetfb_par *par)
+{
+ return am300_init_gpio_regs(par);
+}
+
+static void am300_cleanup(struct broadsheetfb_par *par)
+{
+ int i;
+
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++)
+ gpio_free(gpios[i]);
+
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+ gpio_free(i);
+
+}
+
+static u16 am300_get_hdb(struct broadsheetfb_par *par)
+{
+ u16 res = 0;
+ int i;
+
+ for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+ res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
+
+ return res;
+}
+
+static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
+{
+ int i;
+
+ for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+ gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
+}
+
+
+static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
+ u8 state)
+{
+ switch (bit) {
+ case BS_CS:
+ gpio_set_value(CS_GPIO_PIN, state);
+ break;
+ case BS_DC:
+ gpio_set_value(DC_GPIO_PIN, state);
+ break;
+ case BS_WR:
+ gpio_set_value(WR_GPIO_PIN, state);
+ break;
+ }
+}
+
+static int am300_get_panel_type(void)
+{
+ return panel_type;
+}
+
+static irqreturn_t am300_handle_irq(int irq, void *dev_id)
+{
+ struct broadsheetfb_par *par = dev_id;
+
+ wake_up(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int am300_setup_irq(struct fb_info *info)
+{
+ int ret;
+ struct broadsheetfb_par *par = info->par;
+
+ ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+ IRQF_DISABLED|IRQF_TRIGGER_RISING,
+ "AM300", par);
+ if (ret)
+ dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
+
+ return ret;
+}
+
+static struct broadsheet_board am300_board = {
+ .owner = THIS_MODULE,
+ .init = am300_init_board,
+ .cleanup = am300_cleanup,
+ .set_hdb = am300_set_hdb,
+ .get_hdb = am300_get_hdb,
+ .set_ctl = am300_set_ctl,
+ .wait_for_rdy = am300_wait_event,
+ .get_panel_type = am300_get_panel_type,
+ .setup_irq = am300_setup_irq,
+};
+
+int __init am300_init(void)
+{
+ int ret;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
+
+ /* request our platform independent driver */
+ request_module("broadsheetfb");
+
+ am300_device = platform_device_alloc("broadsheetfb", -1);
+ if (!am300_device)
+ return -ENOMEM;
+
+ /* the am300_board that will be seen by broadsheetfb is a copy */
+ platform_device_add_data(am300_device, &am300_board,
+ sizeof(am300_board));
+
+ ret = platform_device_add(am300_device);
+
+ if (ret) {
+ platform_device_put(am300_device);
+ return ret;
+ }
+
+ return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+MODULE_DESCRIPTION("board driver for am300 epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
clkdev_add(&clks[i]);
}
-int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
struct device *dev)
{
struct clk *r = clk_get(dev, id);
if (!r)
return -ENODEV;
- l = clkdev_alloc(r, alias, alias_dev ? dev_name(alias_dev) : NULL);
+ l = clkdev_alloc(r, alias, alias_dev_name);
clk_put(r);
if (!l)
return -ENODEV;
#endif
void clks_register(struct clk_lookup *clks, size_t num);
-int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+int clk_add_alias(const char *alias, const char *alias_name, char *id,
struct device *dev);
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/pxa2xx_spi.h>
-#include <mach/bitfield.h>
#include "generic.h"
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <linux/gpio.h>
#include <asm/mach/pci.h>
-#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
#include <asm/mach/map.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
};
static struct dm9000_plat_data cmx270_dm9000_platdata = {
- .flags = DM9000_PLATF_32BITONLY,
+ .flags = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
};
static struct platform_device cmx2xx_dm9000_device = {
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa300.h>
-
-#include <mach/hardware.h>
+#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
};
static struct dm9000_plat_data cm_x300_dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
+ .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
};
static struct platform_device dm9000_device = {
/*
- * linux/arch/arm/mach-pxa/colibri.c
+ * linux/arch/arm/mach-pxa/colibri-pxa270.c
*
- * Support for Toradex PXA27x based Colibri module
+ * Support for Toradex PXA270 based Colibri module
* Daniel Mack <daniel@caiaq.de>
*
* This program is free software; you can redistribute it and/or modify
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
#include <mach/colibri.h>
#include "generic.h"
#include "devices.h"
-static unsigned long colibri_pin_config[] __initdata = {
+/*
+ * GPIO configuration
+ */
+static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
GPIO78_nCS_2, /* Ethernet CS */
GPIO114_GPIO, /* Ethernet IRQ */
};
/*
- * Flash
+ * NOR flash
*/
static struct mtd_partition colibri_partitions[] = {
{
}
};
-static struct resource flash_resource = {
+static struct resource colibri_pxa270_flash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device flash_device = {
+static struct platform_device colibri_pxa270_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = colibri_flash_data,
},
- .resource = &flash_resource,
+ .resource = &colibri_pxa270_flash_resource,
.num_resources = 1,
};
/*
* DM9000 Ethernet
*/
+#if defined(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
- .start = COLIBRI_ETH_PHYS,
- .end = COLIBRI_ETH_PHYS + 3,
+ .start = COLIBRI_PXA270_ETH_PHYS,
+ .end = COLIBRI_PXA270_ETH_PHYS + 3,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = COLIBRI_ETH_PHYS + 4,
- .end = COLIBRI_ETH_PHYS + 4 + 500,
+ .start = COLIBRI_PXA270_ETH_PHYS + 4,
+ .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500,
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = COLIBRI_ETH_IRQ,
- .end = COLIBRI_ETH_IRQ,
+ .start = COLIBRI_PXA270_ETH_IRQ,
+ .end = COLIBRI_PXA270_ETH_IRQ,
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
.num_resources = ARRAY_SIZE(dm9000_resources),
.resource = dm9000_resources,
};
+#endif /* CONFIG_DM9000 */
-static struct platform_device *colibri_devices[] __initdata = {
- &flash_device,
+static struct platform_device *colibri_pxa270_devices[] __initdata = {
+ &colibri_pxa270_flash_device,
+#if defined(CONFIG_DM9000)
&dm9000_device,
+#endif
};
-static void __init colibri_init(void)
+static void __init colibri_pxa270_init(void)
{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
-
- platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+ platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
}
-MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
+MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
- .init_machine = colibri_init,
+ .init_machine = colibri_pxa270_init,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
+
--- /dev/null
+/*
+ * arch/arm/mach-pxa/colibri-pxa300.c
+ *
+ * Support for Toradex PXA300/310 based Colibri module
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ * Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <net/ax88796.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include <mach/pxa300.h>
+#include <mach/colibri.h>
+#include <mach/ohci.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2
+};
+
+static struct resource colibri_asix_resource[] = {
+ [0] = {
+ .start = PXA3xx_CS2_PHYS,
+ .end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device asix_device = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(colibri_asix_resource),
+ .resource = colibri_asix_resource,
+ .dev = {
+ .platform_data = &colibri_asix_platdata
+ }
+};
+
+static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
+ GPIO1_nCS2, /* AX88796 chip select */
+ GPIO26_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
+};
+
+static void __init colibri_pxa300_init_eth(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
+ set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
+ platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa300_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+};
+
+static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
+ .port_mode = PMM_GLOBAL_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+void __init colibri_pxa300_init_ohci(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
+ pxa_set_ohci_info(&colibri_pxa300_ohci_info);
+}
+#else
+static inline void colibri_pxa300_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
+ GPIO7_MMC1_CLK,
+ GPIO14_MMC1_CMD,
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO62_LCD_CS_N,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+ GPIO76_LCD_VSYNC,
+};
+
+static void __init colibri_pxa300_init_lcd(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
+}
+
+#else
+static inline void colibri_pxa300_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
+ GPIO24_AC97_SYSCLK,
+ GPIO23_AC97_nACRESET,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+ GPIO29_AC97_BITCLK
+};
+
+static inline void __init colibri_pxa310_init_ac97(void)
+{
+ /* no AC97 codec on Colibri PXA300 */
+ if (!cpu_is_pxa310())
+ return;
+
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa310_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa300_init(void)
+{
+ colibri_pxa300_init_eth();
+ colibri_pxa300_init_ohci();
+ colibri_pxa300_init_lcd();
+ colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
+ colibri_pxa310_init_ac97();
+ colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
+ mfp_to_gpio(MFP_PIN_GPIO13));
+}
+
+MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .init_machine = colibri_pxa300_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * arch/arm/mach-pxa/colibri-pxa320.c
+ *
+ * Support for Toradex PXA320/310 based Colibri module
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ * Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <net/ax88796.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/colibri.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO)
+
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2
+};
+
+static struct resource colibri_asix_resource[] = {
+ [0] = {
+ .start = PXA3xx_CS2_PHYS,
+ .end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device asix_device = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(colibri_asix_resource),
+ .resource = colibri_asix_resource,
+ .dev = {
+ .platform_data = &colibri_asix_platdata
+ }
+};
+
+static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
+ GPIO3_nCS2, /* AX88796 chip select */
+ GPIO36_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
+};
+
+static void __init colibri_pxa320_init_eth(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
+ set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
+ platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa320_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
+ GPIO2_2_USBH_PEN,
+ GPIO3_2_USBH_PWR,
+};
+
+static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
+ .port_mode = PMM_GLOBAL_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+void __init colibri_pxa320_init_ohci(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
+ pxa_set_ohci_info(&colibri_pxa320_ohci_info);
+}
+#else
+static inline void colibri_pxa320_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
+ GPIO6_2_LCD_LDD_0,
+ GPIO7_2_LCD_LDD_1,
+ GPIO8_2_LCD_LDD_2,
+ GPIO9_2_LCD_LDD_3,
+ GPIO10_2_LCD_LDD_4,
+ GPIO11_2_LCD_LDD_5,
+ GPIO12_2_LCD_LDD_6,
+ GPIO13_2_LCD_LDD_7,
+ GPIO63_LCD_LDD_8,
+ GPIO64_LCD_LDD_9,
+ GPIO65_LCD_LDD_10,
+ GPIO66_LCD_LDD_11,
+ GPIO67_LCD_LDD_12,
+ GPIO68_LCD_LDD_13,
+ GPIO69_LCD_LDD_14,
+ GPIO70_LCD_LDD_15,
+ GPIO71_LCD_LDD_16,
+ GPIO72_LCD_LDD_17,
+ GPIO73_LCD_CS_N,
+ GPIO74_LCD_VSYNC,
+ GPIO14_2_LCD_FCLK,
+ GPIO15_2_LCD_LCLK,
+ GPIO16_2_LCD_PCLK,
+ GPIO17_2_LCD_BIAS,
+};
+
+static void __init colibri_pxa320_init_lcd(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
+}
+#else
+static inline void colibri_pxa320_init_lcd(void) {}
+#endif
+
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
+ GPIO34_AC97_SYSCLK,
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET
+};
+
+static inline void __init colibri_pxa320_init_ac97(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa320_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa320_init(void)
+{
+ colibri_pxa320_init_eth();
+ colibri_pxa320_init_ohci();
+ colibri_pxa320_init_lcd();
+ colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
+ colibri_pxa320_init_ac97();
+ colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
+ mfp_to_gpio(MFP_PIN_GPIO28));
+}
+
+MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .init_machine = colibri_pxa320_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * arch/arm/mach-pxa/colibri-pxa3xx.c
+ *
+ * Common functions for all Toradex PXA3xx modules
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int mmc_detect_pin;
+
+static int colibri_pxa3xx_mci_init(struct device *dev,
+ irq_handler_t colibri_mmc_detect_int,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(mmc_detect_pin, "mmc card detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(mmc_detect_pin);
+ ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (ret) {
+ gpio_free(mmc_detect_pin);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
+{
+ free_irq(mmc_detect_pin, data);
+ gpio_free(gpio_to_irq(mmc_detect_pin));
+}
+
+static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = colibri_pxa3xx_mci_init,
+ .exit = colibri_pxa3xx_mci_exit,
+};
+
+void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
+{
+ pxa3xx_mfp_config(pins, len);
+ mmc_detect_pin = detect_pin;
+ pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
+}
+#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static int lcd_bl_pin;
+
+/*
+ * LCD panel (Sharp LQ043T3DX02)
+ */
+static void colibri_lcd_backlight(int on)
+{
+ gpio_set_value(lcd_bl_pin, !!on);
+}
+
+static struct pxafb_mode_info sharp_lq43_mode = {
+ .pixclock = 101936,
+ .xres = 480,
+ .yres = 272,
+ .bpp = 32,
+ .depth = 18,
+ .hsync_len = 41,
+ .left_margin = 2,
+ .right_margin = 2,
+ .vsync_len = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lq43_info = {
+ .modes = &sharp_lq43_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lcd_conn = LCD_COLOR_TFT_18BPP,
+ .pxafb_backlight_power = colibri_lcd_backlight,
+};
+
+void __init colibri_pxa3xx_init_lcd(int bl_pin)
+{
+ lcd_bl_pin = bl_pin;
+ gpio_request(bl_pin, "lcd backlight");
+ gpio_direction_output(bl_pin, 0);
+ set_pxa_fb_info(&sharp_lq43_info);
+}
+#endif
+
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
/* Green LED off tells the bootloader to halt */
gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
- arm_machine_restart('h');
+ arm_machine_restart('h', NULL);
}
-static void corgi_restart(char mode)
+static void corgi_restart(char mode, const char *cmd)
{
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
- arm_machine_restart('h');
+ arm_machine_restart('h', cmd);
}
static void __init corgi_init(void)
#include <linux/string.h>
#include <mach/corgi.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/sharpsl.h>
#include <mach/spitz.h>
#include <asm/hardware/scoop.h>
#include <mach/sharpsl.h>
#include <mach/corgi.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
#include <asm/mach-types.h>
#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/regs-ssp.h>
#include "sharpsl.h"
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#ifdef DEBUG
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa3xx-regs.h>
#include "generic.h"
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+static struct gpio_keys_button csb701_buttons[] = {
+ {
+ .code = 0x7,
+ .gpio = 1,
+ .active_low = 1,
+ .desc = "SW2",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data csb701_gpio_keys_data = {
+ .buttons = csb701_buttons,
+ .nbuttons = ARRAY_SIZE(csb701_buttons),
+};
+
+static struct gpio_led csb701_leds[] = {
+ {
+ .name = "csb701:yellow:heartbeat",
+ .default_trigger = "heartbeat",
+ .gpio = 11,
+ .active_low = 1,
+ },
+};
+
+static struct platform_device csb701_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev.platform_data = &csb701_gpio_keys_data,
+};
+
+static struct gpio_led_platform_data csb701_leds_gpio_data = {
+ .leds = csb701_leds,
+ .num_leds = ARRAY_SIZE(csb701_leds),
+};
+
+static struct platform_device csb701_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &csb701_leds_gpio_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &csb701_gpio_keys,
+ &csb701_leds_gpio,
+};
+
+static int __init csb701_init(void)
+{
+ return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+module_init(csb701_init);
+
--- /dev/null
+/*
+ * Support for Cogent CSB726
+ *
+ * Copyright (c) 2008 Dmitry Eremin-Solenikov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sm501.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/csb726.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
+ * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
+ * XXX: 21,
+ * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
+ * XXX: 33 CS_5 for LAN9215 on R1
+ */
+
+static unsigned long csb726_pin_config[] = {
+ GPIO78_nCS_2, /* EXP_CS */
+ GPIO79_nCS_3, /* SMSC9215 */
+ GPIO80_nCS_4, /* SM501 */
+
+ GPIO52_GPIO, /* #SMSC9251 int */
+ GPIO53_GPIO, /* SM501 int */
+
+ GPIO1_GPIO, /* GPIO0 */
+ GPIO11_GPIO, /* GPIO1 */
+ GPIO9_GPIO, /* GPIO2 */
+ GPIO10_GPIO, /* GPIO3 */
+ GPIO16_PWM0_OUT, /* or GPIO4 */
+ GPIO17_PWM1_OUT, /* or GPIO5 */
+ GPIO94_GPIO, /* GPIO6 */
+ GPIO95_GPIO, /* GPIO7 */
+ GPIO96_GPIO, /* GPIO8 */
+ GPIO97_GPIO, /* GPIO9 */
+ GPIO15_GPIO, /* EXP_IRQ */
+ GPIO18_RDY, /* EXP_WAIT */
+
+ GPIO0_GPIO, /* PWR_INT */
+ GPIO104_GPIO, /* PWR_OFF */
+
+ GPIO12_GPIO, /* touch irq */
+
+ GPIO13_SSP2_TXD,
+ GPIO14_SSP2_SFRM,
+ MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
+ GPIO22_SSP2_SCLK,
+
+ GPIO81_SSP3_TXD,
+ GPIO82_SSP3_RXD,
+ GPIO83_SSP3_SFRM,
+ GPIO84_SSP3_SCLK,
+
+ GPIO20_GPIO, /* SDIO int */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO100_GPIO, /* SD CD */
+ GPIO101_GPIO, /* SD WP */
+
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16, /* maybe unused */
+ GPIO85_nPCE_1,
+ GPIO98_GPIO, /* CF IRQ */
+ GPIO99_GPIO, /* CF CD */
+ GPIO103_GPIO, /* Reset */
+
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+
+static struct pxamci_platform_data csb726_mci_data;
+
+static int csb726_mci_init(struct device *dev,
+ irq_handler_t detect, void *data)
+{
+ int err;
+
+ csb726_mci_data.detect_delay = msecs_to_jiffies(500);
+
+ err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
+ if (err)
+ goto err_det_req;
+
+ err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
+ if (err)
+ goto err_det_dir;
+
+ err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
+ if (err)
+ goto err_ro_req;
+
+ err = gpio_direction_input(CSB726_GPIO_MMC_RO);
+ if (err)
+ goto err_ro_dir;
+
+ err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
+ IRQF_DISABLED, "MMC card detect", data);
+ if (err)
+ goto err_irq;
+
+ return 0;
+
+err_irq:
+err_ro_dir:
+ gpio_free(CSB726_GPIO_MMC_RO);
+err_ro_req:
+err_det_dir:
+ gpio_free(CSB726_GPIO_MMC_DETECT);
+err_det_req:
+ return err;
+}
+
+static int csb726_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(CSB726_GPIO_MMC_RO);
+}
+
+static void csb726_mci_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
+ gpio_free(CSB726_GPIO_MMC_RO);
+ gpio_free(CSB726_GPIO_MMC_DETECT);
+}
+
+static struct pxamci_platform_data csb726_mci = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = csb726_mci_init,
+ .get_ro = csb726_mci_get_ro,
+ /* FIXME setpower */
+ .exit = csb726_mci_exit,
+};
+
+static struct pxaohci_platform_data csb726_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ .flags = ENABLE_PORT1 | NO_OC_PROTECTION,
+};
+
+static struct mtd_partition csb726_flash_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = CSB726_FLASH_uMON,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data csb726_flash_data = {
+ .width = 2,
+ .parts = csb726_flash_partitions,
+ .nr_parts = ARRAY_SIZE(csb726_flash_partitions),
+};
+
+static struct resource csb726_flash_resources[] = {
+ {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device csb726_flash = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &csb726_flash_data,
+ },
+ .resource = csb726_flash_resources,
+ .num_resources = ARRAY_SIZE(csb726_flash_resources),
+};
+
+static struct resource csb726_sm501_resources[] = {
+ {
+ .start = PXA_CS4_PHYS,
+ .end = PXA_CS4_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "sm501-localmem",
+ },
+ {
+ .start = PXA_CS4_PHYS + SZ_64M - SZ_2M,
+ .end = PXA_CS4_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "sm501-regs",
+ },
+ {
+ .start = CSB726_IRQ_SM501,
+ .end = CSB726_IRQ_SM501,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sm501_initdata csb726_sm501_initdata = {
+/* .devices = SM501_USE_USB_HOST, */
+ .devices = SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
+};
+
+static struct sm501_platdata csb726_sm501_platdata = {
+ .init = &csb726_sm501_initdata,
+};
+
+static struct platform_device csb726_sm501 = {
+ .name = "sm501",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(csb726_sm501_resources),
+ .resource = csb726_sm501_resources,
+ .dev = {
+ .platform_data = &csb726_sm501_platdata,
+ },
+};
+
+static struct resource csb726_lan_resources[] = {
+ {
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CSB726_IRQ_LAN,
+ .end = CSB726_IRQ_LAN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device csb726_lan = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(csb726_lan_resources),
+ .resource = csb726_lan_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &csb726_flash,
+ &csb726_sm501,
+ &csb726_lan,
+};
+
+static void __init csb726_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
+/* MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
+/* MSC2 = 0x06697ff4; *//* none/SM501 */
+ MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ pxa_set_mci_info(&csb726_mci);
+ pxa_set_ohci_info(&csb726_ohci_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(CSB726, "Cogent CSB726")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .init_machine = csb726_init,
+ .timer = &pxa_timer,
+MACHINE_END
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <mach/pxa-regs.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <asm/mach-types.h>
#include <mach/irqs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/pxafb.h>
#include <mach/udc.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
eseries_register_clks();
- clk_add_alias("CLK_CK48M", &e740_t7l66xb_device.dev,
+ clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
"UDCCLK", &pxa25x_device_udc.dev),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
static void __init e750_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
- clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev,
+ clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
static void __init e800_init(void)
{
- clk_add_alias("CLK_CK3P6MI", &e800_tc6393xb_device.dev,
+ clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x_keypad.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <mach/pxa2xx_spi.h>
#include "generic.h"
+#include "devices.h"
-/* GPIO IRQ usage */
-#define GPIO41_ETHIRQ (41)
+/* EM-X270 specific GPIOs */
#define GPIO13_MMC_CD (13)
+#define GPIO95_MMC_WP (95)
+#define GPIO56_NAND_RB (56)
+
+/* eXeda specific GPIOs */
+#define GPIO114_MMC_CD (114)
+#define GPIO20_NAND_RB (20)
+#define GPIO38_SD_PWEN (38)
+
+/* common GPIOs */
+#define GPIO11_NAND_CS (11)
+#define GPIO93_CAM_RESET (93)
+#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
-#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
-/* NAND control GPIOs */
-#define GPIO11_NAND_CS (11)
-#define GPIO56_NAND_RB (56)
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
-static unsigned long em_x270_pin_config[] = {
+static unsigned long common_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO18_RDY,
/* GPIO */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
+ GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
- GPIO56_GPIO, /* NAND Ready/Busy */
/* interrupts */
- GPIO13_GPIO, /* MMC card detect */
GPIO41_GPIO, /* DM9000 interrupt */
};
+static unsigned long em_x270_pin_config[] = {
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+ GPIO95_GPIO, /* MMC Write protect */
+};
+
+static unsigned long exeda_pin_config[] = {
+ GPIO20_GPIO, /* NAND Ready/Busy */
+ GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
+ GPIO114_GPIO, /* MMC card detect */
+};
+
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource em_x270_dm9000_resource[] = {
[0] = {
};
static struct dm9000_plat_data em_x270_dm9000_platdata = {
- .flags = DM9000_PLATF_32BITONLY,
+ .flags = DM9000_PLATF_NO_EEPROM,
};
static struct platform_device em_x270_dm9000 = {
static void __init em_x270_init_dm9000(void)
{
+ em_x270_dm9000_platdata.flags |= dm9000_flags;
platform_device_register(&em_x270_dm9000);
}
#else
{
dsb();
- return gpio_get_value(GPIO56_NAND_RB);
+ return gpio_get_value(nand_rb);
}
static struct mtd_partition em_x270_partition_info[] = {
gpio_direction_output(GPIO11_NAND_CS, 1);
- err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+ err = gpio_request(nand_rb, "NAND R/B");
if (err) {
pr_warning("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
- gpio_direction_input(GPIO56_NAND_RB);
+ gpio_direction_input(nand_rb);
platform_device_register(&em_x270_nand);
}
static inline void em_x270_init_nand(void) {}
#endif
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition em_x270_nor_parts[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00050000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Environment",
+ .offset = 0x00050000,
+ .size = 0x00010000,
+ }, {
+ .name = "Reserved",
+ .offset = 0x00060000,
+ .size = 0x00050000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Splashscreen",
+ .offset = 0x000b0000,
+ .size = 0x00050000,
+ }
+};
+
+static struct physmap_flash_data em_x270_nor_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = em_x270_nor_parts,
+ .nr_parts = ARRAY_SIZE(em_x270_nor_parts),
+ },
+};
+
+static struct resource em_x270_nor_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device em_x270_physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &em_x270_nor_flash_resource,
+ .dev = {
+ .platform_data = &em_x270_nor_data,
+ },
+};
+
+static void __init em_x270_init_nor(void)
+{
+ platform_device_register(&em_x270_physmap_flash);
+}
+#else
+static inline void em_x270_init_nor(void) {}
+#endif
+
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
/* MCI controller setup */
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
{
- int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ int err;
+
+ em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+ if (IS_ERR(em_x270_sdio_ldo)) {
+ dev_err(dev, "can't request SDIO power supply: %ld\n",
+ PTR_ERR(em_x270_sdio_ldo));
+ return PTR_ERR(em_x270_sdio_ldo);
+ }
+
+ err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
- printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
- __func__, err);
- return err;
+ dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+ goto err_irq;
+ }
+
+ if (machine_is_em_x270()) {
+ err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+ if (err) {
+ dev_err(dev, "can't request MMC write protect: %d\n",
+ err);
+ goto err_gpio_wp;
+ }
+ gpio_direction_input(GPIO95_MMC_WP);
+ } else {
+ err = gpio_request(GPIO38_SD_PWEN, "sdio power");
+ if (err) {
+ dev_err(dev, "can't request MMC power control : %d\n",
+ err);
+ goto err_gpio_wp;
+ }
+ gpio_direction_output(GPIO38_SD_PWEN, 1);
}
return 0;
+
+err_gpio_wp:
+ free_irq(gpio_to_irq(mmc_cd), data);
+err_irq:
+ regulator_put(em_x270_sdio_ldo);
+
+ return err;
}
static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
{
- /*
- FIXME: current hardware implementation does not allow to
- enable/disable MMC power. This will be fixed in next HW releases,
- and we'll need to add implmentation here.
- */
- return;
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask) {
+ int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+ regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+ regulator_enable(em_x270_sdio_ldo);
+ } else {
+ regulator_disable(em_x270_sdio_ldo);
+ }
}
static void em_x270_mci_exit(struct device *dev, void *data)
{
- int irq = gpio_to_irq(GPIO13_MMC_CD);
- free_irq(irq, data);
+ free_irq(gpio_to_irq(mmc_cd), data);
+ regulator_put(em_x270_sdio_ldo);
+
+ if (machine_is_em_x270())
+ gpio_free(GPIO95_MMC_WP);
+ else
+ gpio_free(GPIO38_SD_PWEN);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO95_MMC_WP);
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
- .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
+ .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+ MMC_VDD_30_31|MMC_VDD_31_32,
.init = em_x270_mci_init,
.setpower = em_x270_mci_setpower,
.exit = em_x270_mci_exit,
static void __init em_x270_init_mmc(void)
{
+ if (machine_is_em_x270())
+ em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+
+ em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&em_x270_mci_platform_data);
}
#else
static inline void em_x270_init_mmc(void) {}
#endif
-/* LCD 480x640 */
+/* LCD */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info em_x270_lcd_mode = {
- .pixclock = 50000,
- .bpp = 16,
- .xres = 480,
- .yres = 640,
- .hsync_len = 8,
- .vsync_len = 2,
- .left_margin = 8,
- .upper_margin = 0,
- .right_margin = 24,
- .lower_margin = 4,
- .cmap_greyscale = 0,
+static struct pxafb_mode_info em_x270_lcd_modes[] = {
+ [0] = {
+ .pixclock = 38250,
+ .bpp = 16,
+ .xres = 480,
+ .yres = 640,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 24,
+ .lower_margin = 4,
+ .sync = 0,
+ },
+ [1] = {
+ .pixclock = 153800,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 88,
+ .lower_margin = 2,
+ .sync = 0,
+ },
};
static struct pxafb_mach_info em_x270_lcd = {
- .modes = &em_x270_lcd_mode,
- .num_modes = 1,
+ .modes = em_x270_lcd_modes,
+ .num_modes = 2,
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
+
static void __init em_x270_init_lcd(void)
{
set_pxa_fb_info(&em_x270_lcd);
static inline void em_x270_init_lcd(void) {}
#endif
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master em_x270_spi_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+};
+
+static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info em_x270_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &em_x270_tdo24m_chip,
+ .platform_data = &em_x270_tdo24m_pdata,
+ },
+};
+
+static void __init em_x270_init_spi(void)
+{
+ pxa2xx_set_spi_info(1, &em_x270_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
+}
+#else
+static inline void em_x270_init_spi(void) {}
+#endif
+
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init em_x270_init_ac97(void)
{
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_matrix_keys[] = {
+static unsigned int em_x270_module_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
};
-struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
/* code map for the matrix keys */
.matrix_key_rows = 3,
.matrix_key_cols = 3,
- .matrix_key_map = em_x270_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
+ .matrix_key_map = em_x270_module_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
+static unsigned int em_x270_exeda_matrix_keys[] = {
+ KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
+ KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
+ KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
+ KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
+
+ KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
+ KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
+ KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
+
+ KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
+ KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
+ KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
+ KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
+
+ KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
+ KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
+ KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
+ KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
+
+ KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
+ KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
+ KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
+ KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
+
+ KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
+ KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
+ KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
+ KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
+
+ KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
+ KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
+ KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
+ KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
+
+ KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
+ KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
+ KEY(7, 4, 0), KEY(7, 5, 0),
+ KEY(7, 6, 0), KEY(7, 7, 0),
+};
+
+struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
+ /* code map for the matrix keys */
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 8,
+ .matrix_key_map = em_x270_exeda_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
};
static void __init em_x270_init_keypad(void)
{
- pxa_set_keypad_info(&em_x270_keypad_info);
+ if (machine_is_em_x270())
+ pxa_set_keypad_info(&em_x270_module_keypad_info);
+ else
+ pxa_set_keypad_info(&em_x270_exeda_keypad_info);
}
#else
static inline void em_x270_init_keypad(void) {}
static inline void em_x270_init_gpio_keys(void) {}
#endif
-static void __init em_x270_init(void)
+/* Quick Capture Interface and sensor setup */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static struct regulator *em_x270_camera_ldo;
+
+static int em_x270_sensor_init(struct device *dev)
{
+ int ret;
+
+ ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+ if (ret)
+ return ret;
+
+ gpio_direction_output(GPIO93_CAM_RESET, 0);
+
+ em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
+ if (em_x270_camera_ldo == NULL) {
+ gpio_free(GPIO93_CAM_RESET);
+ return -ENODEV;
+ }
+
+ ret = regulator_enable(em_x270_camera_ldo);
+ if (ret) {
+ regulator_put(em_x270_camera_ldo);
+ gpio_free(GPIO93_CAM_RESET);
+ return ret;
+ }
+
+ gpio_set_value(GPIO93_CAM_RESET, 1);
+
+ return 0;
+}
+
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+ .init = em_x270_sensor_init,
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 2600,
+};
+
+static int em_x270_sensor_power(struct device *dev, int on)
+{
+ int ret;
+ int is_on = regulator_is_enabled(em_x270_camera_ldo);
+
+ if (on == is_on)
+ return 0;
+
+ gpio_set_value(GPIO93_CAM_RESET, !on);
+
+ if (on)
+ ret = regulator_enable(em_x270_camera_ldo);
+ else
+ ret = regulator_disable(em_x270_camera_ldo);
+
+ if (ret)
+ return ret;
+
+ gpio_set_value(GPIO93_CAM_RESET, on);
+
+ return 0;
+}
+
+static struct soc_camera_link iclink = {
+ .bus_id = 0,
+ .power = em_x270_sensor_power,
+};
+
+static struct i2c_board_info em_x270_i2c_cam_info[] = {
+ {
+ I2C_BOARD_INFO("mt9m111", 0x48),
+ .platform_data = &iclink,
+ },
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+ .fast_mode = 1,
+};
+
+static void __init em_x270_init_camera(void)
+{
+ pxa_set_i2c_info(&em_x270_i2c_info);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
+ pxa_set_camera_info(&em_x270_camera_platform_data);
+}
+#else
+static inline void em_x270_init_camera(void) {}
+#endif
+
+/* DA9030 related initializations */
+#define REGULATOR_CONSUMER(_name, _dev, _supply) \
+ static struct regulator_consumer_supply _name##_consumers[] = { \
+ { \
+ .dev = _dev, \
+ .supply = _supply, \
+ }, \
+ }
+
+REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
+REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
+REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
+REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+
+#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
+ static struct regulator_init_data _ldo##_data = { \
+ .constraints = { \
+ .min_uV = _min_uV, \
+ .max_uV = _max_uV, \
+ .state_mem = { \
+ .enabled = 0, \
+ }, \
+ .valid_ops_mask = _ops_mask, \
+ }, \
+ .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
+ .consumer_supplies = _ldo##_consumers, \
+ };
+
+REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo10, 2000000, 3200000,
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
+REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+
+struct led_info em_x270_led_info = {
+ .name = "em-x270:orange",
+ .default_trigger = "battery-charging-or-full",
+};
+
+struct power_supply_info em_x270_psy_info = {
+ .name = "LP555597P6H-FPS",
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .voltage_max_design = 4200000,
+ .voltage_min_design = 3000000,
+ .use_for_apm = 1,
+};
+
+static void em_x270_battery_low(void)
+{
+ apm_queue_event(APM_LOW_BATTERY);
+}
+
+static void em_x270_battery_critical(void)
+{
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+}
+
+struct da9030_battery_info em_x270_batterty_info = {
+ .battery_info = &em_x270_psy_info,
+
+ .charge_milliamp = 1000,
+ .charge_millivolt = 4200,
+
+ .vbat_low = 3600,
+ .vbat_crit = 3400,
+ .vbat_charge_start = 4100,
+ .vbat_charge_stop = 4200,
+ .vbat_charge_restart = 4000,
+
+ .vcharge_min = 3200,
+ .vcharge_max = 5500,
+
+ .tbat_low = 197,
+ .tbat_high = 78,
+ .tbat_restart = 100,
+
+ .batmon_interval = 0,
+
+ .battery_low = em_x270_battery_low,
+ .battery_critical = em_x270_battery_critical,
+};
+
+#define DA9030_SUBDEV(_name, _id, _pdata) \
+ { \
+ .name = "da903x-" #_name, \
+ .id = DA9030_ID_##_id, \
+ .platform_data = _pdata, \
+ }
+
+#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+ DA9030_LDO(3),
+ DA9030_LDO(5),
+ DA9030_LDO(10),
+ DA9030_LDO(12),
+ DA9030_LDO(19),
+
+ DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
+ DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
+ DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
+};
+
+static struct da903x_platform_data em_x270_da9030_info = {
+ .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
+ .subdevs = em_x270_da9030_subdevs,
+};
+
+static struct i2c_board_info em_x270_i2c_pmic_info = {
+ I2C_BOARD_INFO("da9030", 0x49),
+ .irq = IRQ_GPIO(0),
+ .platform_data = &em_x270_da9030_info,
+};
+
+static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
+ .use_pio = 1,
+};
+
+static void __init em_x270_init_da9030(void)
+{
+ pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
+ i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
+}
+
+static void __init em_x270_module_init(void)
+{
+ pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+ mmc_cd = GPIO13_MMC_CD;
+ nand_rb = GPIO56_NAND_RB;
+ dm9000_flags = DM9000_PLATF_32BITONLY;
+}
+
+static void __init em_x270_exeda_init(void)
+{
+ pr_info("%s\n", __func__);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
+
+ mmc_cd = GPIO114_MMC_CD;
+ nand_rb = GPIO20_NAND_RB;
+ dm9000_flags = DM9000_PLATF_16BITONLY;
+}
+
+static void __init em_x270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+ if (machine_is_em_x270())
+ em_x270_module_init();
+ else if (machine_is_exeda())
+ em_x270_exeda_init();
+ else
+ panic("Unsupported machine: %d\n", machine_arch_type);
+
+ em_x270_init_da9030();
em_x270_init_dm9000();
em_x270_init_rtc();
em_x270_init_nand();
+ em_x270_init_nor();
em_x270_init_lcd();
em_x270_init_mmc();
em_x270_init_ohci();
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
+ em_x270_init_camera();
+ em_x270_init_spi();
}
MACHINE_START(EM_X270, "Compulab EM-X270")
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
+
+MACHINE_START(EXEDA, "Compulab eXeda")
+ .boot_params = 0xa0000100,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = em_x270_init,
+MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
#include <linux/input.h>
#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
#include "devices.h"
#include "generic.h"
#include <asm/mach/map.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include <mach/reset.h>
+#include <mach/gpio.h>
+#include <mach/pxa2xx-gpio.h>
#include "generic.h"
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
get_clk_frequency_khz(1);
}
+
+/*
+ * Configure pins for GPIO or other functions
+ */
+int pxa_gpio_mode(int gpio_mode)
+{
+ unsigned long flags;
+ int gpio = gpio_mode & GPIO_MD_MASK_NR;
+ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
+ int gafr;
+
+ if (gpio > pxa_last_gpio)
+ return -EINVAL;
+
+ local_irq_save(flags);
+ if (gpio_mode & GPIO_DFLT_LOW)
+ GPCR(gpio) = GPIO_bit(gpio);
+ else if (gpio_mode & GPIO_DFLT_HIGH)
+ GPSR(gpio) = GPIO_bit(gpio);
+ if (gpio_mode & GPIO_MD_MASK_DIR)
+ GPDR(gpio) |= GPIO_bit(gpio);
+ else
+ GPDR(gpio) &= ~GPIO_bit(gpio);
+ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
+ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(pxa_gpio_mode);
* published by the Free Software Foundation.
*/
-typedef int (*set_wake_t)(unsigned int, unsigned int);
-
struct sys_timer;
extern struct sys_timer pxa_timer;
-extern void __init pxa_init_irq(int irq_nr, set_wake_t fn);
-extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn);
+extern void __init pxa_init_irq(int irq_nr,
+ int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
-extern int pxa_last_gpio;
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
+++ /dev/null
-/*
- * linux/arch/arm/mach-pxa/gpio.c
- *
- * Generic PXA GPIO handling
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <asm/gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-
-#include "generic.h"
-
-#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
-
-struct pxa_gpio_chip {
- struct gpio_chip chip;
- void __iomem *regbase;
-};
-
-int pxa_last_gpio;
-
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static int __gpio_is_inverted(unsigned gpio)
-{
- return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-#define __gpio_is_inverted(gpio) (0)
-#endif
-
-/*
- * Configure pins for GPIO or other functions
- */
-int pxa_gpio_mode(int gpio_mode)
-{
- unsigned long flags;
- int gpio = gpio_mode & GPIO_MD_MASK_NR;
- int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
- int gafr;
-
- if (gpio > pxa_last_gpio)
- return -EINVAL;
-
- local_irq_save(flags);
- if (gpio_mode & GPIO_DFLT_LOW)
- GPCR(gpio) = GPIO_bit(gpio);
- else if (gpio_mode & GPIO_DFLT_HIGH)
- GPSR(gpio) = GPIO_bit(gpio);
- if (gpio_mode & GPIO_MD_MASK_DIR)
- GPDR(gpio) |= GPIO_bit(gpio);
- else
- GPDR(gpio) &= ~GPIO_bit(gpio);
- gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
- GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
- local_irq_restore(flags);
-
- return 0;
-}
-EXPORT_SYMBOL(pxa_gpio_mode);
-
-static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 value;
- struct pxa_gpio_chip *pxa;
- void __iomem *gpdr;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- gpdr = pxa->regbase + GPDR_OFFSET;
- local_irq_save(flags);
- value = __raw_readl(gpdr);
- if (__gpio_is_inverted(chip->base + offset))
- value |= mask;
- else
- value &= ~mask;
- __raw_writel(value, gpdr);
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int pxa_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 tmp;
- struct pxa_gpio_chip *pxa;
- void __iomem *gpdr;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- __raw_writel(mask,
- pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET));
- gpdr = pxa->regbase + GPDR_OFFSET;
- local_irq_save(flags);
- tmp = __raw_readl(gpdr);
- if (__gpio_is_inverted(chip->base + offset))
- tmp &= ~mask;
- else
- tmp |= mask;
- __raw_writel(tmp, gpdr);
- local_irq_restore(flags);
-
- return 0;
-}
-
-/*
- * Return GPIO level
- */
-static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- u32 mask = 1 << offset;
- struct pxa_gpio_chip *pxa;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask;
-}
-
-/*
- * Set output GPIO level
- */
-static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- u32 mask = 1 << offset;
- struct pxa_gpio_chip *pxa;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
-
- if (value)
- __raw_writel(mask, pxa->regbase + GPSR_OFFSET);
- else
- __raw_writel(mask, pxa->regbase + GPCR_OFFSET);
-}
-
-#define GPIO_CHIP(_n) \
- [_n] = { \
- .regbase = GPIO##_n##_BASE, \
- .chip = { \
- .label = "gpio-" #_n, \
- .direction_input = pxa_gpio_direction_input, \
- .direction_output = pxa_gpio_direction_output, \
- .get = pxa_gpio_get, \
- .set = pxa_gpio_set, \
- .base = (_n) * 32, \
- .ngpio = 32, \
- }, \
- }
-
-static struct pxa_gpio_chip pxa_gpio_chip[] = {
- GPIO_CHIP(0),
- GPIO_CHIP(1),
- GPIO_CHIP(2),
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- GPIO_CHIP(3),
-#endif
-};
-
-/*
- * PXA GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-
-static unsigned long GPIO_IRQ_rising_edge[4];
-static unsigned long GPIO_IRQ_falling_edge[4];
-static unsigned long GPIO_IRQ_mask[4];
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static int __gpio_is_occupied(unsigned gpio)
-{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
-
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
- }
-
- return 0;
-}
-
-static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
-{
- int gpio, idx;
-
- gpio = IRQ_TO_GPIO(irq);
- idx = gpio >> 5;
-
- if (type == IRQ_TYPE_PROBE) {
- /* Don't mess with enabled GPIOs using preconfigured edges or
- * GPIOs set to alternate function or to output during probe
- */
- if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
- (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
- return 0;
-
- if (__gpio_is_occupied(gpio))
- return 0;
-
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- if (__gpio_is_inverted(gpio))
- GPDR(gpio) |= GPIO_bit(gpio);
- else
- GPDR(gpio) &= ~GPIO_bit(gpio);
-
- if (type & IRQ_TYPE_EDGE_RISING)
- __set_bit(gpio, GPIO_IRQ_rising_edge);
- else
- __clear_bit(gpio, GPIO_IRQ_rising_edge);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- __set_bit(gpio, GPIO_IRQ_falling_edge);
- else
- __clear_bit(gpio, GPIO_IRQ_falling_edge);
-
- GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
- GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
-
- pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
- ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
- ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
- return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1.
- */
-
-static void pxa_ack_low_gpio(unsigned int irq)
-{
- GEDR0 = (1 << (irq - IRQ_GPIO0));
-}
-
-static void pxa_mask_low_gpio(unsigned int irq)
-{
- ICMR &= ~(1 << (irq - PXA_IRQ(0)));
-}
-
-static void pxa_unmask_low_gpio(unsigned int irq)
-{
- ICMR |= 1 << (irq - PXA_IRQ(0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
- .name = "GPIO-l",
- .ack = pxa_ack_low_gpio,
- .mask = pxa_mask_low_gpio,
- .unmask = pxa_unmask_low_gpio,
- .set_type = pxa_gpio_irq_type,
-};
-
-/*
- * Demux handler for GPIO>=2 edge detect interrupts
- */
-
-#define GEDR_BITS (sizeof(gedr) * BITS_PER_BYTE)
-
-static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
-{
- int loop, bit, n;
- unsigned long gedr[4];
-
- do {
- gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3;
- gedr[1] = GEDR1 & GPIO_IRQ_mask[1];
- gedr[2] = GEDR2 & GPIO_IRQ_mask[2];
- gedr[3] = GEDR3 & GPIO_IRQ_mask[3];
-
- GEDR0 = gedr[0]; GEDR1 = gedr[1];
- GEDR2 = gedr[2]; GEDR3 = gedr[3];
-
- loop = 0;
- bit = find_first_bit(gedr, GEDR_BITS);
- while (bit < GEDR_BITS) {
- loop = 1;
-
- n = PXA_GPIO_IRQ_BASE + bit;
- generic_handle_irq(n);
-
- bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
- }
- } while (loop);
-}
-
-static void pxa_ack_muxed_gpio(unsigned int irq)
-{
- int gpio = irq - IRQ_GPIO(2) + 2;
- GEDR(gpio) = GPIO_bit(gpio);
-}
-
-static void pxa_mask_muxed_gpio(unsigned int irq)
-{
- int gpio = irq - IRQ_GPIO(2) + 2;
- __clear_bit(gpio, GPIO_IRQ_mask);
- GRER(gpio) &= ~GPIO_bit(gpio);
- GFER(gpio) &= ~GPIO_bit(gpio);
-}
-
-static void pxa_unmask_muxed_gpio(unsigned int irq)
-{
- int gpio = irq - IRQ_GPIO(2) + 2;
- int idx = gpio >> 5;
- __set_bit(gpio, GPIO_IRQ_mask);
- GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
- GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
-}
-
-static struct irq_chip pxa_muxed_gpio_chip = {
- .name = "GPIO",
- .ack = pxa_ack_muxed_gpio,
- .mask = pxa_mask_muxed_gpio,
- .unmask = pxa_unmask_muxed_gpio,
- .set_type = pxa_gpio_irq_type,
-};
-
-void __init pxa_init_gpio(int gpio_nr, set_wake_t fn)
-{
- int irq, i, gpio;
-
- pxa_last_gpio = gpio_nr - 1;
-
- /* clear all GPIO edge detects */
- for (i = 0; i < gpio_nr; i += 32) {
- GFER(i) = 0;
- GRER(i) = 0;
- GEDR(i) = GEDR(i);
- }
-
- /* GPIO 0 and 1 must have their mask bit always set */
- GPIO_IRQ_mask[0] = 3;
-
- for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
- set_irq_chip(irq, &pxa_low_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) {
- set_irq_chip(irq, &pxa_muxed_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- /* Install handler for GPIO>=2 edge detect interrupts */
- set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
-
- pxa_low_gpio_chip.set_wake = fn;
- pxa_muxed_gpio_chip.set_wake = fn;
-
- /* add a GPIO chip for each register bank.
- * the last PXA25x register only contains 21 GPIOs
- */
- for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) {
- if (gpio + 32 > gpio_nr)
- pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio;
- gpiochip_add(&pxa_gpio_chip[i].chip);
- }
-}
-
-#ifdef CONFIG_PM
-
-static unsigned long saved_gplr[4];
-static unsigned long saved_gpdr[4];
-static unsigned long saved_grer[4];
-static unsigned long saved_gfer[4];
-
-static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
-{
- int i, gpio;
-
- for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
- saved_gplr[i] = GPLR(gpio);
- saved_gpdr[i] = GPDR(gpio);
- saved_grer[i] = GRER(gpio);
- saved_gfer[i] = GFER(gpio);
-
- /* Clear GPIO transition detect bits */
- GEDR(gpio) = GEDR(gpio);
- }
- return 0;
-}
-
-static int pxa_gpio_resume(struct sys_device *dev)
-{
- int i, gpio;
-
- for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
- /* restore level with set/clear */
- GPSR(gpio) = saved_gplr[i];
- GPCR(gpio) = ~saved_gplr[i];
-
- GRER(gpio) = saved_grer[i];
- GFER(gpio) = saved_gfer[i];
- GPDR(gpio) = saved_gpdr[i];
- }
- return 0;
-}
-#else
-#define pxa_gpio_suspend NULL
-#define pxa_gpio_resume NULL
-#endif
-
-struct sysdev_class pxa_gpio_sysclass = {
- .name = "gpio",
- .suspend = pxa_gpio_suspend,
- .resume = pxa_gpio_resume,
-};
-
-static int __init pxa_gpio_init(void)
-{
- return sysdev_class_register(&pxa_gpio_sysclass);
-}
-
-core_initcall(pxa_gpio_init);
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+
+#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/gumstix.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-
#include "generic.h"
static struct resource flash_resource = {
return 0;
}
+int __attribute__((weak)) am300_init(void)
+{
+ return 0;
+}
+
static void __init carrier_board_init(void)
{
/*
* they cannot be detected programatically
*/
am200_init();
+ am300_init();
}
static void __init gumstix_init(void)
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+
+#include <mach/pxa25x.h>
#include <mach/h5000.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/udc.h>
+
#include "generic.h"
/*
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/himalaya.c
+ *
+ * Hardware definitions for the HTC Himalaya
+ *
+ * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
+ *
+ * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include "generic.h"
+
+/* ---------------------- Himalaya LCD definitions -------------------- */
+
+static struct w100_gen_regs himalaya_lcd_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x00000003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode himalaya4_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 0,
+ .right_margin = 31,
+ .upper_margin = 15,
+ .lower_margin = 0,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0x81700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 80,
+ .pixclk_divider = 15,
+ .pixclk_divider_rotated = 15,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_mode himalaya6_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 9,
+ .right_margin = 8,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 95,
+ .pixclk_divider = 0xb,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs himalaya_w100_gpio_info = {
+ .init_data1 = 0xffff0000, /* GPIO_DATA */
+ .gpio_dir1 = 0x00000000, /* GPIO_CNTL1 */
+ .gpio_oe1 = 0x003c0000, /* GPIO_CNTL2 */
+ .init_data2 = 0x00000000, /* GPIO_DATA2 */
+ .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */
+ .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info himalaya_fb_info = {
+ .num_modes = 1,
+ .regs = &himalaya_lcd_regs,
+ .gpio = &himalaya_w100_gpio_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource himalaya_fb_resources[] = {
+ [0] = {
+ .start = 0x08000000,
+ .end = 0x08ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device himalaya_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &himalaya_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(himalaya_fb_resources),
+ .resource = himalaya_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+ &himalaya_fb_device,
+};
+
+static void __init himalaya_lcd_init(void)
+{
+ int himalaya_boardid;
+
+ himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
+ printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
+ himalaya_boardid);
+
+ switch (himalaya_boardid) {
+ case 0x4:
+ himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+ break;
+ case 0x6:
+ himalaya_fb_info.modelist = &himalaya6_lcd_mode;
+ break;
+ default:
+ printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
+ himalaya_boardid);
+ himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+ }
+}
+
+static void __init himalaya_init(void)
+{
+ himalaya_lcd_init();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+MACHINE_START(HIMALAYA, "HTC Himalaya")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .init_machine = himalaya_init,
+ .timer = &pxa_timer,
+MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/idp.h>
#include <mach/pxafb.h>
#include <mach/bitfield.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
+#include <mach/pxa27x.h>
#include <mach/i2c.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/regs-ssp.h>
#include <mach/udc.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
#ifndef _COLIBRI_H_
#define _COLIBRI_H_
+/*
+ * common settings for all modules
+ */
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
+#else
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern void colibri_pxa3xx_init_lcd(int bl_pin);
+#else
+static inline void colibri_pxa3xx_init_lcd(int) {}
+#endif
/* physical memory regions */
-#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
-#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
-/* virtual memory regions */
-#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */
+/* definitions for Colibri PXA270 */
-/* size of flash */
-#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000 114
-#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000)
+#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
+#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */
+#define COLIBRI_PXA270_ETH_IRQ_GPIO 114
+#define COLIBRI_PXA270_ETH_IRQ \
+ gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
#endif /* _COLIBRI_H_ */
+
--- /dev/null
+/*
+ * Support for Cogent CSB726
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef CSB726_H
+#define CSB726_H
+
+#define CSB726_GPIO_IRQ_LAN 52
+#define CSB726_GPIO_IRQ_SM501 53
+#define CSB726_GPIO_MMC_DETECT 100
+#define CSB726_GPIO_MMC_RO 101
+
+#define CSB726_FLASH_SIZE (64 * 1024 * 1024)
+#define CSB726_FLASH_uMON (8 * 1024 * 1024)
+
+#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+
+#endif
+
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
- volatile u32 ddadr; /* Points to the next descriptor + flags */
- volatile u32 dsadr; /* DSADR value for the current transfer */
- volatile u32 dtadr; /* DTADR value for the current transfer */
- volatile u32 dcmd; /* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int num_ch);
-
-int pxa_request_dma (char *name,
- pxa_dma_prio prio,
- void (*irq_handler)(int, void *),
- void *data);
+#include <mach/hardware.h>
-void pxa_free_dma (int dma_ch);
+/* DMA Controller Registers Definitions */
+#define DMAC_REGS_VIRT io_p2v(0x40000000)
+#include <plat/dma.h>
#endif /* _ASM_ARCH_DMA_H */
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
-#include <mach/pxa-regs.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
-
#include <asm-generic/gpio.h>
+#define GPIO_REGS_VIRT io_p2v(0x40E00000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L GPIO_REG(0x0054)
+#define GAFR0_U GPIO_REG(0x0058)
+#define GAFR1_L GPIO_REG(0x005C)
+#define GAFR1_U GPIO_REG(0x0060)
+#define GAFR2_L GPIO_REG(0x0064)
+#define GAFR2_U GPIO_REG(0x0068)
+#define GAFR3_L GPIO_REG(0x006C)
+#define GAFR3_U GPIO_REG(0x0070)
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
- */
#define NR_BUILTIN_GPIO 128
-static inline int gpio_get_value(unsigned gpio)
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
+#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
- return GPLR(gpio) & GPIO_bit(gpio);
- else
- return __gpio_get_value(gpio);
+ return cpu_is_pxa25x() && gpio > 85;
}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
-static inline void gpio_set_value(unsigned gpio, int value)
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
- if (value)
- GPSR(gpio) = GPIO_bit(gpio);
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
else
- GPCR(gpio) = GPIO_bit(gpio);
- } else {
- __gpio_set_value(gpio, value);
- }
+ return af != 0 || dir != 0;
+ } else
+ return GPDR(gpio) & GPIO_bit(gpio);
}
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
-#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
-
-
+#include <plat/gpio.h>
#endif
/* for expansion boards that can't be programatically detected */
extern int am200_init(void);
+extern int am300_init(void);
/* FPGA register virtual addresses */
#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0)
#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1)
#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3)
+#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3)
/*
* CPLD EGPIOs
#ifndef __ASM_ARCH_MFP_PXA25X_H
#define __ASM_ARCH_MFP_PXA25X_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
/* GPIO */
* specific controller, and this should work in most cases.
*/
-#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
#ifndef __ASM_ARCH_MFP_PXA2XX_H
#define __ASM_ARCH_MFP_PXA2XX_H
-#include <mach/mfp.h>
+#include <plat/mfp.h>
/*
* the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
#ifndef __ASM_ARCH_MFP_PXA300_H
#define __ASM_ARCH_MFP_PXA300_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */
#endif
/* Chip Select */
+#define GPIO1_nCS2 MFP_CFG(GPIO1, AF1)
#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1)
/* AC97 */
#ifndef __ASM_ARCH_MFP_PXA320_H
#define __ASM_ARCH_MFP_PXA320_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */
#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0)
/* Chip Select */
+#define GPIO3_nCS2 MFP_CFG(GPIO3, AF1)
#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1)
/* AC97 */
#ifndef __ASM_ARCH_MFP_PXA3XX_H
#define __ASM_ARCH_MFP_PXA3XX_H
-#define MFPR_BASE (0x40e10000)
-#define MFPR_SIZE (PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL (0x1 << 15)
-#define MFPR_PULLUP_EN (0x1 << 14)
-#define MFPR_PULLDOWN_EN (0x1 << 13)
-#define MFPR_SLEEP_SEL (0x1 << 9)
-#define MFPR_SLEEP_OE_N (0x1 << 7)
-#define MFPR_EDGE_CLEAR (0x1 << 6)
-#define MFPR_EDGE_FALL_EN (0x1 << 5)
-#define MFPR_EDGE_RISE_EN (0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x) ((x) << 8)
-#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
+#include <plat/mfp.h>
-#define MFPR_EDGE_NONE (0)
-#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
- * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
- *
- * Input 0 X(0) X(0) X(0) 0
- * Drive 0 0 0 0 X(1) 0
- * Drive 1 0 1 X(1) 0 0
- * Pull hi (1) 1 X(1) 1 0 0
- * Pull lo (0) 1 X(0) 0 1 0
- * Z (float) 1 X(0) 0 0 0
- */
-#define MFPR_LPM_INPUT (0)
-#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK (0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior, the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition pull_sel pullup_en pulldown_en
- * MFPR_PULL_NONE 0 0 0
- * MFPR_PULL_LOW 1 0 1
- * MFPR_PULL_HIGH 1 1 0
- * MFPR_PULL_BOTH 1 1 1
- */
-#define MFPR_PULL_NONE (0)
-#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_BASE (0x40e10000)
/* PXA3xx common MFP configurations - processor specific ones defined
* in mfp-pxa300.h and mfp-pxa320.h
#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by pxa3xx_mfp_init_addr()
- *
- * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
- * structure, which represents a range of MFP pins from "start" to
- * "end", with the offset begining at "offset", to define a single
- * pin, let "end" = -1
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR() to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct pxa3xx_mfp_addr_map {
- unsigned int start;
- unsigned int end;
- unsigned long offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
- { MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
- { MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
-
-/*
- * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
- * to the MFPR register
- */
-unsigned long pxa3xx_mfp_read(int mfp);
-void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
-
-/*
- * pxa3xx_mfp_config - configure the MFPR registers
- *
- * used by board specific initialization code
- */
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
-
-/*
- * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
- * index and MFPR register offset
- *
- * used by processor specific code
+/* NOTE: usage of these two functions is not recommended,
+ * use pxa3xx_mfp_config() instead.
*/
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
-void __init pxa3xx_init_mfp(void);
+static inline unsigned long pxa3xx_mfp_read(int mfp)
+{
+ return mfp_read(mfp);
+}
+
+static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+ mfp_write(mfp, val);
+}
+
+static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
+{
+ mfp_config(mfp_cfg, num);
+}
#endif /* __ASM_ARCH_MFP_PXA3XX_H */
#ifndef __ASM_ARCH_MFP_PXA9xx_H
#define __ASM_ARCH_MFP_PXA9xx_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */
#ifndef __ARCH_PXA_MTD_XIP_H__
#define __ARCH_PXA_MTD_XIP_H__
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
+#include <mach/regs-intc.h>
#define xip_irqpending() (ICIP & ICMR)
--- /dev/null
+/*
+ * GPIOs and interrupts for Palm LifeDrive Handheld Computer
+ *
+ * Authors: Alex Osborne <ato@meshy.org>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMLD_H_
+#define _INCLUDE_PALMLD_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMLD_GPIO_RESET 1
+#define GPIO_NR_PALMLD_POWER_DETECT 4
+#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMLD_POWER_SWITCH 12
+#define GPIO_NR_PALMLD_EARPHONE_DETECT 13
+#define GPIO_NR_PALMLD_LOCK_SWITCH 15
+
+/* SD/MMC */
+#define GPIO_NR_PALMLD_SD_DETECT_N 14
+#define GPIO_NR_PALMLD_SD_POWER 114
+#define GPIO_NR_PALMLD_SD_READONLY 116
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMLD_WM9712_IRQ 27
+
+/* IRDA */
+#define GPIO_NR_PALMLD_IR_DISABLE 108
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMLD_BL_POWER 19
+#define GPIO_NR_PALMLD_LCD_POWER 96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMLD_BORDER_SWITCH 21
+#define GPIO_NR_PALMLD_BORDER_SELECT 22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMLD_BT_POWER 17
+#define GPIO_NR_PALMLD_BT_RESET 83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMLD_PCMCIA_READY 38
+#define GPIO_NR_PALMLD_PCMCIA_POWER 36
+#define GPIO_NR_PALMLD_PCMCIA_RESET 81
+
+/* LEDs */
+#define GPIO_NR_PALMLD_LED_GREEN 52
+#define GPIO_NR_PALMLD_LED_AMBER 94
+
+/* IDE */
+#define GPIO_NR_PALMLD_IDE_IRQ 95
+#define GPIO_NR_PALMLD_IDE_RESET 98
+#define GPIO_NR_PALMLD_IDE_PWEN 115
+
+/* USB */
+#define GPIO_NR_PALMLD_USB_DETECT_N 3
+#define GPIO_NR_PALMLD_USB_READY 86
+#define GPIO_NR_PALMLD_USB_RESET 88
+#define GPIO_NR_PALMLD_USB_INT 106
+#define GPIO_NR_PALMLD_USB_POWER 118
+/* 20, 53 and 86 are usb related too */
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+
+
+/** HERE ARE INIT VALUES **/
+
+/* IO mappings */
+#define PALMLD_USB_PHYS PXA_CS2_PHYS
+#define PALMLD_USB_VIRT 0xf0000000
+#define PALMLD_USB_SIZE 0x00100000
+
+#define PALMLD_IDE_PHYS 0x20000000
+#define PALMLD_IDE_VIRT 0xf1000000
+#define PALMLD_IDE_SIZE 0x00100000
+
+#define PALMLD_PHYS_IO_START 0x40000000
+
+/* BATTERY */
+#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
+#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
+#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMLD_MAX_LIFE_MINS 240 /* on-life in minutes */
+
+#define PALMLD_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMLD_MAX_INTENSITY 0xFE
+#define PALMLD_DEFAULT_INTENSITY 0x7E
+#define PALMLD_LIMIT_MASK 0x7F
+#define PALMLD_PRESCALER 0x3F
+#define PALMLD_PERIOD_NS 3500
+
+#endif
--- /dev/null
+/*
+ * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
+ *
+ * Authors: Ales Snuparek <snuparek@atlas.cz>
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Justin Kendrick <twilightsentry@gmail.com>
+ * RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMT5_H_
+#define _INCLUDE_PALMT5_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMT5_GPIO_RESET 1
+
+#define GPIO_NR_PALMT5_POWER_DETECT 90
+#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMT5_EARPHONE_DETECT 107
+
+/* SD/MMC */
+#define GPIO_NR_PALMT5_SD_DETECT_N 14
+#define GPIO_NR_PALMT5_SD_POWER 114
+#define GPIO_NR_PALMT5_SD_READONLY 115
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMT5_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMT5_IR_DISABLE 40
+
+/* USB */
+#define GPIO_NR_PALMT5_USB_DETECT_N 15
+#define GPIO_NR_PALMT5_USB_POWER 95
+#define GPIO_NR_PALMT5_USB_PULLUP 93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMT5_BL_POWER 84
+#define GPIO_NR_PALMT5_LCD_POWER 96
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMT5_BT_POWER 17
+#define GPIO_NR_PALMT5_BT_RESET 83
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses */
+#define PALMT5_PHYS_RAM_START 0xa0000000
+#define PALMT5_PHYS_IO_START 0x40000000
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME 21
+
+/* BATTERY */
+#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMT5_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#define PALMT5_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMT5_MAX_INTENSITY 0xFE
+#define PALMT5_DEFAULT_INTENSITY 0x7E
+#define PALMT5_LIMIT_MASK 0x7F
+#define PALMT5_PRESCALER 0x3F
+#define PALMT5_PERIOD_NS 3500
+
+#endif
extern void pxa_cpu_resume(void);
extern int pxa_pm_enter(suspend_state_t state);
+
+/* NOTE: this is for PM debugging on Lubbock, it's really a big
+ * ugly, but let's keep the crap minimum here, instead of direct
+ * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
+ */
+#ifdef CONFIG_ARCH_LUBBOCK
+extern void lubbock_set_hexled(uint32_t value);
+#else
+#define lubbock_set_hexled(x)
+#endif
+++ /dev/null
-/*
- * arch/arm/mach-pxa/include/mach/pxa-regs.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS 0x00000000
-#define PXA_CS1_PHYS 0x04000000
-#define PXA_CS2_PHYS 0x08000000
-#define PXA_CS3_PHYS 0x0C000000
-#define PXA_CS4_PHYS 0x10000000
-#define PXA_CS5_PHYS 0x14000000
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
-#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
-#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
-#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
-#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
-
-#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
-#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
-#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
-
-#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
-#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
-#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
-
-#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
- (0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
-#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
- (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
- (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
-#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
-#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
-#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
-
-#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
-#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
-#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
-#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
-
-
-
-/*
- * DMA Controller
- */
-#define DCSR(x) __REG2(0x40000000, (x) << 2)
-
-#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
-#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
-#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
-#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
-#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
-#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
-#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
-#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_EORINTR (1 << 9) /* The end of Receive */
-#endif
-
-#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
-#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
-
-#define DRCMR(n) (*(((n) < 64) ? \
- &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
- &__REG2(0x40001100, ((n) & 0x3f) << 2)))
-
-#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
-#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
-
-#define DDADR(x) __REG2(0x40000200, (x) << 4)
-#define DSADR(x) __REG2(0x40000204, (x) << 4)
-#define DTADR(x) __REG2(0x40000208, (x) << 4)
-#define DCMD(x) __REG2(0x4000020c, (x) << 4)
-
-#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
-#define DDADR_STOP (1 << 0) /* Stop (read / write) */
-
-#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
-#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
-#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
-#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
-#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
-#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
-#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
-#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
-#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
-#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
-#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/*
- * Real Time Clock
- */
-
-#define RCNR __REG(0x40900000) /* RTC Count Register */
-#define RTAR __REG(0x40900004) /* RTC Alarm Register */
-#define RTSR __REG(0x40900008) /* RTC Status Register */
-#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
-#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
-#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
-#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
-#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
-#define RTSR_AL (1 << 0) /* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0 __REG(0x40A00000) /* */
-#define OSMR1 __REG(0x40A00004) /* */
-#define OSMR2 __REG(0x40A00008) /* */
-#define OSMR3 __REG(0x40A0000C) /* */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
-#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
-#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
-#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3 (1 << 3) /* Match status channel 3 */
-#define OSSR_M2 (1 << 2) /* Match status channel 2 */
-#define OSSR_M1 (1 << 1) /* Match status channel 1 */
-#define OSSR_M0 (1 << 0) /* Match status channel 0 */
-
-#define OWER_WME (1 << 0) /* Watchdog Match Enable */
-
-#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
-#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
-#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
-#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
-#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
-#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
-#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
-#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
-#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-/*
- * General Purpose I/O
- */
-
-#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
-
-#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
-
-#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
-
-#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
-
-#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-
-#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-
-#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
-
-#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
-#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
-
-#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
- ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-
-#endif
--- /dev/null
+#ifndef __MACH_PXA25x_H
+#define __MACH_PXA25x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#endif /* __MACH_PXA25x_H */
--- /dev/null
+#ifndef __MACH_PXA27x_H
+#define __MACH_PXA27x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+
+#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
+#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
+#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
+#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
+#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+#endif /* __MACH_PXA27x_H */
#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+#include <mach/gpio.h>
+
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
#ifndef __PXA2XX_REGS_H
#define __PXA2XX_REGS_H
+#include <mach/hardware.h>
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
/*
* Memory controller
*/
#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-
-#ifdef CONFIG_PXA27x
-
-#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
-#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
-#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
-#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
-#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-
-#endif
-
-
/*
* Power Manager
*/
--- /dev/null
+#ifndef __MACH_PXA300_H
+#define __MACH_PXA300_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#endif /* __MACH_PXA300_H */
--- /dev/null
+#ifndef __MACH_PXA320_H
+#define __MACH_PXA320_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#endif /* __MACH_PXA320_H */
+
#ifndef __ASM_ARCH_PXA3XX_REGS_H
#define __ASM_ARCH_PXA3XX_REGS_H
+#include <mach/hardware.h>
+
+/*
+ * Static Chip Selects
+ */
+
+#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS (0x10000000)
+#define PXA3xx_CS3_PHYS (0x14000000)
+
/*
* Oscillator Configuration Register (OSCC)
*/
--- /dev/null
+#ifndef __MACH_PXA930_H
+#define __MACH_PXA930_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#endif /* __MACH_PXA930_H */
--- /dev/null
+#ifndef __ASM_MACH_REGS_INTC_H
+#define __ASM_MACH_REGS_INTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
+#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
+#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
+#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
+#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
+#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+
+#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
+#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
+#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+
+#endif /* __ASM_MACH_REGS_INTC_H */
--- /dev/null
+#ifndef __ASM_MACH_REGS_OST_H
+#define __ASM_MACH_REGS_OST_H
+
+#include <mach/hardware.h>
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0 __REG(0x40A00000) /* */
+#define OSMR1 __REG(0x40A00004) /* */
+#define OSMR2 __REG(0x40A00008) /* */
+#define OSMR3 __REG(0x40A0000C) /* */
+#define OSMR4 __REG(0x40A00080) /* */
+#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
+#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
+#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+
+#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
+#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
+#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+#endif /* __ASM_MACH_REGS_OST_H */
--- /dev/null
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR __REG(0x40900000) /* RTC Count Register */
+#define RTAR __REG(0x40900004) /* RTC Alarm Register */
+#define RTSR __REG(0x40900008) /* RTC Status Register */
+#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */
#if defined(CONFIG_PXA25x)
#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-
#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
#include <asm/proc-fns.h>
#include "hardware.h"
#include "pxa2xx-regs.h"
-#include "pxa-regs.h"
static inline void arch_idle(void)
{
}
-void arch_reset(char mode);
+void arch_reset(char mode, const char *cmd);
static inline void arch_decomp_setup(void)
{
- if (machine_is_littleton() || machine_is_intelmote2())
+ if (machine_is_littleton() || machine_is_intelmote2()
+ || machine_is_csb726())
UART = STUART;
}
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
+#include <mach/regs-intc.h>
#include "generic.h"
.unmask = pxa_unmask_irq,
};
+/*
+ * GPIO IRQs for GPIO 0 and 1
+ */
+static int pxa_set_low_gpio_type(unsigned int irq, unsigned int type)
+{
+ int gpio = irq - IRQ_GPIO0;
+
+ if (__gpio_is_occupied(gpio)) {
+ pr_err("%s failed: GPIO is configured\n", __func__);
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ GRER0 |= GPIO_bit(gpio);
+ else
+ GRER0 &= ~GPIO_bit(gpio);
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ GFER0 |= GPIO_bit(gpio);
+ else
+ GFER0 &= ~GPIO_bit(gpio);
+
+ return 0;
+}
+
+static void pxa_ack_low_gpio(unsigned int irq)
+{
+ GEDR0 = (1 << (irq - IRQ_GPIO0));
+}
+
+static void pxa_mask_low_gpio(unsigned int irq)
+{
+ ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+}
+
+static void pxa_unmask_low_gpio(unsigned int irq)
+{
+ ICMR |= 1 << (irq - PXA_IRQ(0));
+}
+
+static struct irq_chip pxa_low_gpio_chip = {
+ .name = "GPIO-l",
+ .ack = pxa_ack_low_gpio,
+ .mask = pxa_mask_low_gpio,
+ .unmask = pxa_unmask_low_gpio,
+ .set_type = pxa_set_low_gpio_type,
+};
+
+static void __init pxa_init_low_gpio_irq(set_wake_t fn)
+{
+ int irq;
+
+ /* clear edge detection on GPIO 0 and 1 */
+ GFER0 &= ~0x3;
+ GRER0 &= ~0x3;
+ GEDR0 = 0x3;
+
+ for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
+ set_irq_chip(irq, &pxa_low_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ pxa_low_gpio_chip.set_wake = fn;
+}
+
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
{
int irq;
}
pxa_internal_irq_chip.set_wake = fn;
+ pxa_init_low_gpio_irq(fn);
}
#ifdef CONFIG_PM
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/idp.h>
#include "leds.h"
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/lubbock.h>
#include "leds.h"
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include "leds.h"
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
+#include <mach/gpio.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <asm/hardware/sa1111.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
+#include <mach/gpio.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
+#include <mach/pm.h>
#include "generic.h"
#include "clock.h"
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
};
+#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+void lubbock_set_hexled(uint32_t value)
+{
+ LUB_HEXLED = value;
+}
+
void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
{
unsigned long flags;
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
+#include <linux/usb/gpio_vbus.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
#include <mach/magician.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
#include <mach/pxafb.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
GPIO31_I2S_SYNC,
GPIO113_I2S_SYSCLK,
+ /* SSP 1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+
/* SSP 2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
* GPIO Keys
*/
+#define INIT_KEY(_code, _gpio, _desc) \
+ { \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
+ }
+
static struct gpio_keys_button magician_button_table[] = {
- {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"},
- {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"},
- {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"},
- {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"},
- {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"},
- {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"},
- {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"},
- {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"},
- {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"},
- {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"},
- {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"},
- {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"},
- {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"},
- {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"},
- {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"},
+ INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"),
+ INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"),
+ INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"),
+ INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"),
+ INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"),
+ INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"),
+ INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"),
+ INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"),
+ INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"),
+ INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"),
+ INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"),
+ INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"),
+ INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
+ INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"),
+ INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"),
};
static struct gpio_keys_platform_data gpio_keys_data = {
static struct resource egpio_resources[] = {
[0] = {
.start = PXA_CS3_PHYS,
- .end = PXA_CS3_PHYS + 0x20,
+ .end = PXA_CS3_PHYS + 0x20 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
},
{
.name = "magician::phone_bl",
- .default_trigger = "none",
+ .default_trigger = "backlight",
.gpio = GPIO103_MAGICIAN_LED_KP,
},
};
},
};
-static struct platform_device pasic3;
-
static struct pasic3_leds_machinfo pasic3_leds_info = {
.num_leds = ARRAY_SIZE(pasic3_leds),
.power_gpio = EGPIO_MAGICIAN_LED_POWER,
},
};
+/*
+ * USB "Transceiver"
+ */
+
+static struct resource gpio_vbus_resource = {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
+};
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+ .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB,
+};
+
+static struct platform_device gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &gpio_vbus_resource,
+ .dev = {
+ .platform_data = &gpio_vbus_info,
+ },
+};
+
/*
* External power
*/
static struct resource power_supply_resources[] = {
[0] = {
.name = "ac",
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MAGICIAN_AC,
- .end = IRQ_MAGICIAN_AC,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
[1] = {
.name = "usb",
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MAGICIAN_AC,
- .end = IRQ_MAGICIAN_AC,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
};
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
-#define PXA_CS_SIZE 0x04000000
-
static struct resource strataflash_resource = {
.start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
&egpio,
&backlight,
&pasic3,
+ &gpio_vbus,
&power_supply,
&strataflash,
&leds_gpio,
gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1);
pxa_set_ficp_info(&magician_ficp_info);
}
+ pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
+#include <mach/gpio.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <linux/init.h>
#include <linux/sysdev.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
#include "generic.h"
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
#define PGSR(x) __REG2(0x40F00020, (x) << 2)
#define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
#define GAFR_L(x) __GAFR(0, x)
#include <linux/sysdev.h>
#include <mach/hardware.h>
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
#include <mach/pxa3xx-regs.h>
-/* mfp_spin_lock is used to ensure that MFP register configuration
- * (most likely a read-modify-write operation) is atomic, and that
- * mfp_table[] is consistent
- */
-static DEFINE_SPINLOCK(mfp_spin_lock);
-
-static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
-
-struct pxa3xx_mfp_pin {
- unsigned long config; /* -1 for not configured */
- unsigned long mfpr_off; /* MFPRxx Register offset */
- unsigned long mfpr_run; /* Run-Mode Register Value */
- unsigned long mfpr_lpm; /* Low Power Mode Register Value */
-};
-
-static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
-
-/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
-static const unsigned long mfpr_lpm[] = {
- MFPR_LPM_INPUT,
- MFPR_LPM_DRIVE_LOW,
- MFPR_LPM_DRIVE_HIGH,
- MFPR_LPM_PULL_LOW,
- MFPR_LPM_PULL_HIGH,
- MFPR_LPM_FLOAT,
-};
-
-/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
-static const unsigned long mfpr_pull[] = {
- MFPR_PULL_NONE,
- MFPR_PULL_LOW,
- MFPR_PULL_HIGH,
- MFPR_PULL_BOTH,
-};
-
-/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-static const unsigned long mfpr_edge[] = {
- MFPR_EDGE_NONE,
- MFPR_EDGE_RISE,
- MFPR_EDGE_FALL,
- MFPR_EDGE_BOTH,
-};
-
-#define mfpr_readl(off) \
- __raw_readl(mfpr_mmio_base + (off))
-
-#define mfpr_writel(off, val) \
- __raw_writel(val, mfpr_mmio_base + (off))
-
-#define mfp_configured(p) ((p)->config != -1)
-
-/*
- * perform a read-back of any MFPR register to make sure the
- * previous writings are finished
- */
-#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
-
-static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
-{
- if (mfp_configured(p))
- mfpr_writel(p->mfpr_off, p->mfpr_run);
-}
-
-static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
-{
- if (mfp_configured(p)) {
- unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
- if (mfpr_clr != p->mfpr_run)
- mfpr_writel(p->mfpr_off, mfpr_clr);
- if (p->mfpr_lpm != mfpr_clr)
- mfpr_writel(p->mfpr_off, p->mfpr_lpm);
- }
-}
-
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
-{
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- for (i = 0; i < num; i++, mfp_cfgs++) {
- unsigned long tmp, c = *mfp_cfgs;
- struct pxa3xx_mfp_pin *p;
- int pin, af, drv, lpm, edge, pull;
-
- pin = MFP_PIN(c);
- BUG_ON(pin >= MFP_PIN_MAX);
- p = &mfp_table[pin];
-
- af = MFP_AF(c);
- drv = MFP_DS(c);
- lpm = MFP_LPM_STATE(c);
- edge = MFP_LPM_EDGE(c);
- pull = MFP_PULL(c);
-
- /* run-mode pull settings will conflict with MFPR bits of
- * low power mode state, calculate mfpr_run and mfpr_lpm
- * individually if pull != MFP_PULL_NONE
- */
- tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
-
- if (likely(pull == MFP_PULL_NONE)) {
- p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
- p->mfpr_lpm = p->mfpr_run;
- } else {
- p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
- p->mfpr_run = tmp | mfpr_pull[pull];
- }
-
- p->config = c; __mfp_config_run(p);
- }
-
- mfpr_sync();
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-unsigned long pxa3xx_mfp_read(int mfp)
-{
- unsigned long val, flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
- val = mfpr_readl(mfp_table[mfp].mfpr_off);
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-
- return val;
-}
-
-void pxa3xx_mfp_write(int mfp, unsigned long val)
-{
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
- mfpr_writel(mfp_table[mfp].mfpr_off, val);
- mfpr_sync();
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
-{
- struct pxa3xx_mfp_addr_map *p;
- unsigned long offset, flags;
- int i;
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- for (p = map; p->start != MFP_PIN_INVALID; p++) {
- offset = p->offset;
- i = p->start;
-
- do {
- mfp_table[i].mfpr_off = offset;
- mfp_table[i].mfpr_run = 0;
- mfp_table[i].mfpr_lpm = 0;
- offset += 4; i++;
- } while ((i <= p->end) && (p->end != -1));
- }
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_init_mfp(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
- mfp_table[i].config = -1;
-}
-
#ifdef CONFIG_PM
/*
* Configure the MFPs appropriately for suspend/resume.
*/
static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
- int pin;
-
- for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
- struct pxa3xx_mfp_pin *p = &mfp_table[pin];
- __mfp_config_lpm(p);
- }
+ mfp_config_lpm();
return 0;
}
static int pxa3xx_mfp_resume(struct sys_device *d)
{
- int pin;
-
- for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
- struct pxa3xx_mfp_pin *p = &mfp_table[pin];
- __mfp_config_run(p);
- }
+ mfp_config_run();
/* clear RDH bit when MFP settings are restored
*
* preserve them here in case they will be referenced later
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
return 0;
}
#else
#include <linux/power_supply.h>
#include <linux/wm97xx_batt.h>
#include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
+#include <mach/regs-rtc.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxafb.h>
-#include <mach/pxa2xx-regs.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
/*
* USB UDC
*/
-static void udc_power_command(int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_DISCONNECT:
- gpio_set_value(GPIO22_USB_ENABLE, 0);
- break;
- case PXA2XX_UDC_CMD_CONNECT:
- gpio_set_value(GPIO22_USB_ENABLE, 1);
- break;
- default:
- printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
- break;
- }
-}
-
static int is_usb_connected(void)
{
return !gpio_get_value(GPIO13_nUSB_DETECT);
static struct pxa2xx_udc_mach_info mioa701_udc_info = {
.udc_is_connected = is_usb_connected,
- .udc_command = udc_power_command,
+ .gpio_pullup = GPIO22_USB_ENABLE,
};
-struct gpio_ress udc_gpios[] = {
- MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
+struct gpio_vbus_mach_info gpio_vbus_data = {
+ .gpio_vbus = GPIO13_nUSB_DETECT,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = -1,
};
-static int __init udc_init(void)
-{
- pxa_set_udc_info(&mioa701_udc_info);
- return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
-}
-
-static void udc_exit(void)
-{
- mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
-}
-
/*
* SDIO/MMC Card controller
*/
MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
+MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
&mioa701_sound,
&power_dev,
&strataflash,
- &mioa701_board
+ &gpio_vbus,
+ &mioa701_board,
};
static void mioa701_machine_exit(void);
static void mioa701_poweroff(void)
{
mioa701_machine_exit();
- arm_machine_restart('s');
+ arm_machine_restart('s', NULL);
}
-static void mioa701_restart(char c)
+static void mioa701_restart(char c, const char *cmd)
{
mioa701_machine_exit();
- arm_machine_restart('s');
+ arm_machine_restart('s', cmd);
}
struct gpio_ress global_gpios[] = {
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
- udc_init();
+ pxa_set_udc_info(&mioa701_udc_info);
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
static void mioa701_machine_exit(void)
{
- udc_exit();
bootstrap_exit();
gsm_exit();
}
#include <linux/types.h>
#include <linux/usb/isp116x.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
+#include <mach/pxa25x.h>
#include "generic.h"
static void isp116x_pfm_delay(struct device *dev, int delay)
--- /dev/null
+/*
+ * Hardware definitions for Palm LifeDrive
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Alex Osborne <ato@meshy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/palmld.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmld_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO116_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO108_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* GPIO KEYS */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power switch */
+ GPIO15_GPIO, /* lock switch */
+
+ /* LEDs */
+ GPIO52_GPIO, /* green led */
+ GPIO94_GPIO, /* orange led */
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO36_GPIO, /* wifi power */
+ GPIO38_GPIO, /* wifi ready */
+ GPIO81_GPIO, /* wifi reset */
+
+ /* HDD */
+ GPIO95_GPIO, /* HDD irq */
+ GPIO115_GPIO, /* HDD power */
+
+ /* MISC */
+ GPIO13_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
+ palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMLD_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmld_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+ gpio_free(GPIO_NR_PALMLD_SD_POWER);
+ free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+}
+
+static void palmld_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmld_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmld_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmld_mci_power,
+ .get_ro = palmld_mci_get_ro,
+ .init = palmld_mci_init,
+ .exit = palmld_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmld_matrix_keys[] = {
+ KEY(0, 1, KEY_F2),
+ KEY(0, 2, KEY_UP),
+
+ KEY(1, 0, KEY_F3),
+ KEY(1, 1, KEY_F4),
+ KEY(1, 2, KEY_RIGHT),
+
+ KEY(2, 0, KEY_F1),
+ KEY(2, 1, KEY_F5),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_F6),
+ KEY(3, 1, KEY_ENTER),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmld_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmld_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmld_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+ {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
+ {KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
+};
+
+static struct gpio_keys_platform_data palmld_pxa_keys_data = {
+ .buttons = palmld_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmld_pxa_buttons),
+};
+
+static struct platform_device palmld_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmld_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmld_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMLD_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmld_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmld_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_BL_POWER);
+ gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmld_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMLD_MAX_INTENSITY,
+ .dft_brightness = PALMLD_MAX_INTENSITY,
+ .pwm_period_ns = PALMLD_PERIOD_NS,
+ .init = palmld_backlight_init,
+ .notify = palmld_backlight_notify,
+ .exit = palmld_backlight_exit,
+};
+
+static struct platform_device palmld_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmld_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmld_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmld_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+}
+
+static void palmld_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmld_ficp_platform_data = {
+ .startup = palmld_irda_startup,
+ .shutdown = palmld_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmld_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+struct gpio_led gpio_leds[] = {
+{
+ .name = "palmld:green:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMLD_LED_GREEN,
+}, {
+ .name = "palmld:amber:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMLD_LED_AMBER,
+},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmld_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ }
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
+ if (ret)
+ goto err3;
+
+ return 0;
+
+err3:
+ gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+err2:
+ gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmld_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static int palmld_is_usb_online(void)
+{
+ return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+ gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static char *palmld_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmld_is_ac_online,
+ .is_usb_online = palmld_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmld_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmld_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMLD_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMLD_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmld_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmld_lcd_screen = {
+ .modes = palmld_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmld_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmld_pxa_keys,
+#endif
+ &palmld_backlight,
+ &palmld_leds,
+ &power_supply,
+};
+
+static struct map_desc palmld_io_desc[] __initdata = {
+{
+ .virtual = PALMLD_IDE_VIRT,
+ .pfn = __phys_to_pfn(PALMLD_IDE_PHYS),
+ .length = PALMLD_IDE_SIZE,
+ .type = MT_DEVICE
+},
+{
+ .virtual = PALMLD_USB_VIRT,
+ .pfn = __phys_to_pfn(PALMLD_USB_PHYS),
+ .length = PALMLD_USB_SIZE,
+ .type = MT_DEVICE
+},
+};
+
+static void __init palmld_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
+}
+
+static void __init palmld_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+
+ set_pxa_fb_info(&palmld_lcd_screen);
+ pxa_set_mci_info(&palmld_mci_platform_data);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmld_ficp_platform_data);
+ pxa_set_keypad_info(&palmld_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+ palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMLD, "Palm LifeDrive")
+ .phys_io = PALMLD_PHYS_IO_START,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = palmld_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmld_init
+MACHINE_END
--- /dev/null
+/*
+ * Hardware definitions for Palm Tungsten|T5
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Ales Snuparek <snuparek@atlas.cz>
+ * Justin Kendrick <twilightsentry@gmail.com>
+ * RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/palmt5.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmt5_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO40_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb power */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* MISC */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO90_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
+ palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMT5_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmt5_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+ gpio_free(GPIO_NR_PALMT5_SD_POWER);
+ free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
+ gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+}
+
+static void palmt5_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmt5_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmt5_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmt5_mci_power,
+ .get_ro = palmt5_mci_get_ro,
+ .init = palmt5_mci_init,
+ .exit = palmt5_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmt5_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmt5_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmt5_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmt5_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
+ .buttons = palmt5_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmt5_pxa_buttons),
+};
+
+static struct platform_device palmt5_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmt5_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMT5_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmt5_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmt5_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_BL_POWER);
+ gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmt5_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMT5_MAX_INTENSITY,
+ .dft_brightness = PALMT5_MAX_INTENSITY,
+ .pwm_period_ns = PALMT5_PERIOD_NS,
+ .init = palmt5_backlight_init,
+ .notify = palmt5_backlight_notify,
+ .exit = palmt5_backlight_exit,
+};
+
+static struct platform_device palmt5_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmt5_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmt5_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmt5_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+}
+
+static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmt5_ficp_platform_data = {
+ .startup = palmt5_irda_startup,
+ .shutdown = palmt5_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmt5_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMT5_USB_POWER,
+ .gpio_pullup_inverted = 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+err2:
+ gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmt5_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static char *palmt5_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmt5_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmt5_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmt5_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMT5_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMT5_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmt5_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmt5_lcd_screen = {
+ .modes = palmt5_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmt5_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmt5_pxa_keys,
+#endif
+ &palmt5_backlight,
+ &power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmt5_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
+ gpio_free(GPIO_NR_PALMT5_USB_POWER);
+ }
+}
+
+static void __init palmt5_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+
+ set_pxa_fb_info(&palmt5_lcd_screen);
+ pxa_set_mci_info(&palmt5_mci_platform_data);
+ palmt5_udc_init();
+ pxa_set_udc_info(&palmt5_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmt5_ficp_platform_data);
+ pxa_set_keypad_info(&palmt5_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+ palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMT5, "Palm Tungsten|T5")
+ .phys_io = PALMT5_PHYS_IO_START,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmt5_init
+MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmtx.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmz72.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pcm027.h>
#include "generic.h"
#include <mach/i2c.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pcm990_baseboard.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa27x.h>
#include "devices.h"
#include "generic.h"
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/errno.h>
-#include <linux/time.h>
-#include <mach/hardware.h>
-#include <asm/memory.h>
-#include <asm/system.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
-#include <mach/lubbock.h>
-#include <asm/mach/time.h>
struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
static unsigned long *sleep_save;
/* if invalid, display message and wait for a hardware reset */
if (checksum != sleep_save_checksum) {
-#ifdef CONFIG_ARCH_LUBBOCK
- LUB_HEXLED = 0xbadbadc5;
-#endif
+
+ lubbock_set_hexled(0xbadbadc5);
+
while (1)
pxa_cpu_pm_fns->enter(state);
}
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/i2c.h>
static void poodle_poweroff(void)
{
- arm_machine_restart('h');
+ arm_machine_restart('h', NULL);
}
-static void poodle_restart(char mode)
+static void poodle_restart(char mode, const char *cmd)
{
- arm_machine_restart('h');
+ arm_machine_restart('h', cmd);
}
static void __init poodle_init(void)
#include <linux/pwm.h>
#include <asm/div64.h>
-#include <mach/pxa-regs.h>
/* PWM registers and bits definitions */
#define PWMCR (0x00)
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/gpio.h>
+#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
void __init pxa25x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(85, pxa25x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
}
#ifdef CONFIG_CPU_PXA26x
void __init pxa26x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(90, pxa25x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
}
#endif
clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
- if ((ret = pxa_init_dma(16)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 16)))
return ret;
pxa25x_init_pm();
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/gpio.h>
+#include <mach/pxa27x.h>
#include <mach/reset.h>
#include <mach/ohci.h>
#include <mach/pm.h>
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
- pxa_init_gpio(121, pxa27x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
/*
clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
- if ((ret = pxa_init_dma(32)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa27x_init_pm();
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
#include <mach/mfp-pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include "generic.h"
#include "devices.h"
#include "clock.h"
-static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
MFP_ADDR_X(GPIO3, GPIO26, 0x027c),
};
/* override pxa300 MFP register addresses */
-static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO30, GPIO98, 0x0418),
MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
static int __init pxa300_init(void)
{
if (cpu_is_pxa300() || cpu_is_pxa310()) {
- pxa3xx_init_mfp();
- pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa300_mfp_addr_map);
clks_register(ARRAY_AND_SIZE(common_clkregs));
}
if (cpu_is_pxa310()) {
- pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+ mfp_init_addr(pxa310_mfp_addr_map);
clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
}
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
#include "generic.h"
#include "devices.h"
#include "clock.h"
-static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
MFP_ADDR_X(GPIO5, GPIO9, 0x028C),
static int __init pxa320_init(void)
{
if (cpu_is_pxa320()) {
- pxa3xx_init_mfp();
- pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa320_mfp_addr_map);
clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
}
#include <linux/sysdev.h>
#include <mach/hardware.h>
+#include <mach/gpio.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
pxa_init_irq(56, pxa3xx_set_wake);
- pxa_init_gpio(128, NULL);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
/*
clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
- if ((ret = pxa_init_dma(32)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa3xx_init_pm();
#include <linux/irq.h>
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/mfp-pxa930.h>
+#include <mach/pxa930.h>
-static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
MFP_ADDR(GPIO0, 0x02e0),
MFP_ADDR(GPIO1, 0x02dc),
static int __init pxa930_init(void)
{
if (cpu_is_pxa930()) {
- pxa3xx_init_mfp();
- pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa930_mfp_addr_map);
}
return 0;
#include <linux/io.h>
#include <asm/proc-fns.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
#include <mach/reset.h>
unsigned int reset_status;
OSMR3 = OSCR + 368640; /* ... in 100 ms */
}
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
{
clear_reset_status(RESET_STATUS_ALL);
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
#include <mach/i2c.h>
-#include <mach/regs-lcd.h>
#include <mach/pxafb.h>
#include "devices.h"
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/sharpsl.h>
#include "sharpsl.h"
#include <asm/assembler.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
#include <mach/i2c.h>
static void spitz_poweroff(void)
{
- arm_machine_restart('g');
+ arm_machine_restart('g', NULL);
}
-static void spitz_restart(char mode)
+static void spitz_restart(char mode, const char *cmd)
{
/* Bootloader magic for a reboot */
if((MSC0 & 0xffff0000) == 0x7ff00000)
#include <mach/sharpsl.h>
#include <mach/spitz.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ssp.h>
#define TIMEOUT 100000
#include <asm/assembler.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
.text
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
#include <mach/pxafb.h>
#include <mach/pxa27x_keypad.h>
#include <asm/div64.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
/*
* This is PXA's sched_clock implementation. This has a resolution
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+
+#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
#include <mach/i2c.h>
static void tosa_poweroff(void)
{
- arm_machine_restart('g');
+ arm_machine_restart('g', NULL);
}
-static void tosa_restart(char mode)
+static void tosa_restart(char mode, const char *cmd)
{
/* Bootloader magic for a reboot */
if((MSC0 & 0xffff0000) == 0x7ff00000)
pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
- clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+ clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/bitfield.h>
+#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/i2c.h>
#include <mach/viper.h>
},
{
.virtual = VIPER_PC104IO_BASE,
- .pfn = __phys_to_pfn(_PCMCIA1IO),
+ .pfn = __phys_to_pfn(0x30000000),
.length = 0x00800000,
.type = MT_DEVICE,
},
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
-#include <asm/gpio.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include <mach/i2c.h>
#include <mach/zylonite.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
#include <mach/zylonite.h>
#include "generic.h"
bool "Support RealView/PB11MPCore platform"
select CPU_V6
select ARM_GIC
+ select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView MPCore Platform Baseboard.
PB11MPCore is a platform with an on-board ARM11MPCore and has
bool "Support RealView/PB-A8 platform"
select CPU_V7
select ARM_GIC
+ select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
PB-A8 is a platform with an on-board Cortex-A8 and has support for
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/smc911x.h>
+#include <linux/ata_platform.h>
#include <asm/clkdev.h>
#include <asm/system.h>
return platform_device_register(&realview_eth_device);
}
+struct platform_device realview_usb_device = {
+ .name = "isp1760",
+ .num_resources = 2,
+};
+
+int realview_usb_register(struct resource *res)
+{
+ realview_usb_device.resource = res;
+ return platform_device_register(&realview_usb_device);
+}
+
+static struct pata_platform_info pata_platform_data = {
+ .ioport_shift = 1,
+};
+
+static struct resource pata_resources[] = {
+ [0] = {
+ .start = REALVIEW_CF_BASE,
+ .end = REALVIEW_CF_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_CF_BASE + 0x100,
+ .end = REALVIEW_CF_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device realview_cf_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pata_resources),
+ .resource = pata_resources,
+ .dev = {
+ .platform_data = &pata_platform_data,
+ },
+};
+
static struct resource realview_i2c_resource = {
.start = REALVIEW_I2C_BASE,
.end = REALVIEW_I2C_BASE + SZ_4K - 1,
struct platform_device realview_i2c_device = {
.name = "versatile-i2c",
- .id = -1,
+ .id = 0,
.num_resources = 1,
.resource = &realview_i2c_resource,
};
+static struct i2c_board_info realview_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+ .type = "ds1338",
+ },
+};
+
+static int __init realview_i2c_init(void)
+{
+ return i2c_register_board_info(0, realview_i2c_board_info,
+ ARRAY_SIZE(realview_i2c_board_info));
+}
+arch_initcall(realview_i2c_init);
+
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
static unsigned int realview_mmc_status(struct device *dev)
}
extern struct platform_device realview_flash_device;
+extern struct platform_device realview_cf_device;
extern struct platform_device realview_i2c_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
+extern int realview_usb_register(struct resource *res);
#endif
#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */
#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */
#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */
-#define REALVIEW_PBA8_CF_BASE 0x18000000 /* Compact flash */
-#define REALVIEW_PBA8_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */
#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
#define REALVIEW_PBA8_FLASH0_BASE 0x40000000
#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M
#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */
+/*
+ * CompactFlash
+ */
+#define REALVIEW_CF_BASE 0x18000000 /* CompactFlash */
+#define REALVIEW_CF_MEM_BASE 0x18003000 /* SMC for CompactFlash */
+
/*
* Disk on Chip
*/
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
unsigned int val;
return realview_eth_register(name, realview_eb_eth_resources);
}
+static struct resource realview_eb_isp1761_resources[] = {
+ [0] = {
+ .start = REALVIEW_EB_USB_BASE,
+ .end = REALVIEW_EB_USB_BASE + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EB_USB,
+ .end = IRQ_EB_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static void __init gic_init_irq(void)
{
if (core_tile_eb11mp() || core_tile_a9mp()) {
/* platform devices */
realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH;
realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH;
+ realview_eb_isp1761_resources[1].start = IRQ_EB11MP_USB;
+ realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB;
}
static void __init realview_eb_timer_init(void)
realview_flash_register(&realview_eb_flash_resource, 1);
platform_device_register(&realview_i2c_device);
eth_device_register();
+ realview_usb_register(realview_eb_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
},
};
+static struct resource realview_pb1176_isp1761_resources[] = {
+ [0] = {
+ .start = REALVIEW_PB1176_USB_BASE,
+ .end = REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PB1176_USB,
+ .end = IRQ_PB1176_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static void __init gic_init_irq(void)
{
/* ARM1176 DevChip GIC, primary */
realview_flash_register(&realview_pb1176_flash_resource, 1);
realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
+ platform_device_register(&realview_i2c_device);
+ realview_usb_register(realview_pb1176_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
},
};
-struct resource realview_pb11mp_cf_resources[] = {
+static struct resource realview_pb11mp_isp1761_resources[] = {
[0] = {
- .start = REALVIEW_PB11MP_CF_BASE,
- .end = REALVIEW_PB11MP_CF_BASE + SZ_4K - 1,
+ .start = REALVIEW_PB11MP_USB_BASE,
+ .end = REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = REALVIEW_PB11MP_CF_MEM_BASE,
- .end = REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = -1, /* FIXME: Find correct irq */
- .end = -1,
+ .start = IRQ_TC11MP_USB,
+ .end = IRQ_TC11MP_USB,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device realview_pb11mp_cf_device = {
- .name = "compactflash",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_pb11mp_cf_resources),
- .resource = realview_pb11mp_cf_resources,
-};
-
static void __init gic_init_irq(void)
{
unsigned int pldctrl;
ARRAY_SIZE(realview_pb11mp_flash_resource));
realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
platform_device_register(&realview_i2c_device);
- platform_device_register(&realview_pb11mp_cf_device);
+ platform_device_register(&realview_cf_device);
+ realview_usb_register(realview_pb11mp_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
},
};
-struct resource realview_pba8_cf_resources[] = {
+static struct resource realview_pba8_isp1761_resources[] = {
[0] = {
- .start = REALVIEW_PBA8_CF_BASE,
- .end = REALVIEW_PBA8_CF_BASE + SZ_4K - 1,
+ .start = REALVIEW_PBA8_USB_BASE,
+ .end = REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = REALVIEW_PBA8_CF_MEM_BASE,
- .end = REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = -1, /* FIXME: Find correct irq */
- .end = -1,
+ .start = IRQ_PBA8_USB,
+ .end = IRQ_PBA8_USB,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device realview_pba8_cf_device = {
- .name = "compactflash",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_pba8_cf_resources),
- .resource = realview_pba8_cf_resources,
-};
-
static void __init gic_init_irq(void)
{
/* ARM PB-A8 on-board GIC */
ARRAY_SIZE(realview_pba8_flash_resource));
realview_eth_register(NULL, realview_pba8_smsc911x_resources);
platform_device_register(&realview_i2c_device);
- platform_device_register(&realview_pba8_cf_device);
+ platform_device_register(&realview_cf_device);
+ realview_usb_register(realview_pba8_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
#include <asm/mach/dma.h>
#include <asm/hardware/iomd.h>
+struct iomd_dma {
+ struct dma_struct dma;
+ unsigned int state;
+ unsigned long base; /* Controller base address */
+ int irq; /* Controller IRQ */
+ struct scatterlist cur_sg; /* Current controller buffer */
+ dma_addr_t dma_addr;
+ unsigned int dma_len;
+};
+
#if 0
typedef enum {
dma_size_8 = 1,
#define CR (IOMD_IO0CR - IOMD_IO0CURA)
#define ST (IOMD_IO0ST - IOMD_IO0CURA)
-static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
+static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
{
unsigned long end, offset, flags = 0;
- if (dma->sg) {
- sg->dma_address = dma->sg->dma_address;
+ if (idma->dma.sg) {
+ sg->dma_address = idma->dma_addr;
offset = sg->dma_address & ~PAGE_MASK;
- end = offset + dma->sg->length;
+ end = offset + idma->dma_len;
if (end > PAGE_SIZE)
end = PAGE_SIZE;
sg->length = end - TRANSFER_SIZE;
- dma->sg->length -= end - offset;
- dma->sg->dma_address += end - offset;
+ idma->dma_len -= end - offset;
+ idma->dma_addr += end - offset;
- if (dma->sg->length == 0) {
- if (dma->sgcount > 1) {
- dma->sg++;
- dma->sgcount--;
+ if (idma->dma_len == 0) {
+ if (idma->dma.sgcount > 1) {
+ idma->dma.sg = sg_next(idma->dma.sg);
+ idma->dma_addr = idma->dma.sg->dma_address;
+ idma->dma_len = idma->dma.sg->length;
+ idma->dma.sgcount--;
} else {
- dma->sg = NULL;
+ idma->dma.sg = NULL;
flags |= DMA_END_S;
}
}
static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
{
- dma_t *dma = (dma_t *)dev_id;
- unsigned long base = dma->dma_base;
+ struct iomd_dma *idma = dev_id;
+ unsigned long base = idma->base;
do {
unsigned int status;
if (!(status & DMA_ST_INT))
return IRQ_HANDLED;
- if ((dma->state ^ status) & DMA_ST_AB)
- iomd_get_next_sg(&dma->cur_sg, dma);
+ if ((idma->state ^ status) & DMA_ST_AB)
+ iomd_get_next_sg(&idma->cur_sg, idma);
switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
case DMA_ST_OFL: /* OIA */
case DMA_ST_AB: /* .IB */
- iomd_writel(dma->cur_sg.dma_address, base + CURA);
- iomd_writel(dma->cur_sg.length, base + ENDA);
- dma->state = DMA_ST_AB;
+ iomd_writel(idma->cur_sg.dma_address, base + CURA);
+ iomd_writel(idma->cur_sg.length, base + ENDA);
+ idma->state = DMA_ST_AB;
break;
case DMA_ST_OFL | DMA_ST_AB: /* OIB */
case 0: /* .IA */
- iomd_writel(dma->cur_sg.dma_address, base + CURB);
- iomd_writel(dma->cur_sg.length, base + ENDB);
- dma->state = 0;
+ iomd_writel(idma->cur_sg.dma_address, base + CURB);
+ iomd_writel(idma->cur_sg.length, base + ENDB);
+ idma->state = 0;
break;
}
if (status & DMA_ST_OFL &&
- dma->cur_sg.length == (DMA_END_S|DMA_END_L))
+ idma->cur_sg.length == (DMA_END_S|DMA_END_L))
break;
} while (1);
- dma->state = ~DMA_ST_AB;
+ idma->state = ~DMA_ST_AB;
disable_irq(irq);
return IRQ_HANDLED;
}
-static int iomd_request_dma(dmach_t channel, dma_t *dma)
+static int iomd_request_dma(unsigned int chan, dma_t *dma)
{
- return request_irq(dma->dma_irq, iomd_dma_handle,
- IRQF_DISABLED, dma->device_id, dma);
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+ return request_irq(idma->irq, iomd_dma_handle,
+ IRQF_DISABLED, idma->dma.device_id, idma);
}
-static void iomd_free_dma(dmach_t channel, dma_t *dma)
+static void iomd_free_dma(unsigned int chan, dma_t *dma)
{
- free_irq(dma->dma_irq, dma);
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+ free_irq(idma->irq, idma);
}
-static void iomd_enable_dma(dmach_t channel, dma_t *dma)
+static void iomd_enable_dma(unsigned int chan, dma_t *dma)
{
- unsigned long dma_base = dma->dma_base;
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+ unsigned long dma_base = idma->base;
unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
- if (dma->invalid) {
- dma->invalid = 0;
+ if (idma->dma.invalid) {
+ idma->dma.invalid = 0;
/*
* Cope with ISA-style drivers which expect cache
* coherence.
*/
- if (!dma->sg) {
- dma->sg = &dma->buf;
- dma->sgcount = 1;
- dma->buf.length = dma->count;
- dma->buf.dma_address = dma_map_single(NULL,
- dma->addr, dma->count,
- dma->dma_mode == DMA_MODE_READ ?
+ if (!idma->dma.sg) {
+ idma->dma.sg = &idma->dma.buf;
+ idma->dma.sgcount = 1;
+ idma->dma.buf.length = idma->dma.count;
+ idma->dma.buf.dma_address = dma_map_single(NULL,
+ idma->dma.addr, idma->dma.count,
+ idma->dma.dma_mode == DMA_MODE_READ ?
DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
iomd_writeb(DMA_CR_C, dma_base + CR);
- dma->state = DMA_ST_AB;
+ idma->state = DMA_ST_AB;
}
-
- if (dma->dma_mode == DMA_MODE_READ)
+
+ if (idma->dma.dma_mode == DMA_MODE_READ)
ctrl |= DMA_CR_D;
iomd_writeb(ctrl, dma_base + CR);
- enable_irq(dma->dma_irq);
+ enable_irq(idma->irq);
}
-static void iomd_disable_dma(dmach_t channel, dma_t *dma)
+static void iomd_disable_dma(unsigned int chan, dma_t *dma)
{
- unsigned long dma_base = dma->dma_base;
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+ unsigned long dma_base = idma->base;
unsigned long flags;
local_irq_save(flags);
- if (dma->state != ~DMA_ST_AB)
- disable_irq(dma->dma_irq);
+ if (idma->state != ~DMA_ST_AB)
+ disable_irq(idma->irq);
iomd_writeb(0, dma_base + CR);
local_irq_restore(flags);
}
-static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle)
+static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
{
int tcr, speed;
tcr = iomd_readb(IOMD_DMATCR);
speed &= 3;
- switch (channel) {
+ switch (chan) {
case DMA_0:
tcr = (tcr & ~0x03) | speed;
break;
.name = "floppydma"
};
-static void floppy_enable_dma(dmach_t channel, dma_t *dma)
+struct floppy_dma {
+ struct dma_struct dma;
+ unsigned int fiq;
+};
+
+static void floppy_enable_dma(unsigned int chan, dma_t *dma)
{
+ struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
void *fiqhandler_start;
unsigned int fiqhandler_length;
struct pt_regs regs;
- if (dma->sg)
+ if (fdma->dma.sg)
BUG();
- if (dma->dma_mode == DMA_MODE_READ) {
+ if (fdma->dma.dma_mode == DMA_MODE_READ) {
extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
fiqhandler_start = &floppy_fiqin_start;
fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
}
- regs.ARM_r9 = dma->count;
- regs.ARM_r10 = (unsigned long)dma->addr;
+ regs.ARM_r9 = fdma->dma.count;
+ regs.ARM_r10 = (unsigned long)fdma->dma.addr;
regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE;
if (claim_fiq(&fh)) {
set_fiq_handler(fiqhandler_start, fiqhandler_length);
set_fiq_regs(®s);
- enable_fiq(dma->dma_irq);
+ enable_fiq(fdma->fiq);
}
-static void floppy_disable_dma(dmach_t channel, dma_t *dma)
+static void floppy_disable_dma(unsigned int chan, dma_t *dma)
{
- disable_fiq(dma->dma_irq);
+ struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
+ disable_fiq(fdma->fiq);
release_fiq(&fh);
}
-static int floppy_get_residue(dmach_t channel, dma_t *dma)
+static int floppy_get_residue(unsigned int chan, dma_t *dma)
{
struct pt_regs regs;
get_fiq_regs(®s);
/*
* This is virtual DMA - we don't need anything here.
*/
-static void sound_enable_disable_dma(dmach_t channel, dma_t *dma)
+static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
{
}
.disable = sound_enable_disable_dma,
};
-void __init arch_dma_init(dma_t *dma)
+static struct iomd_dma iomd_dma[6];
+
+static struct floppy_dma floppy_dma = {
+ .dma = {
+ .d_ops = &floppy_dma_ops,
+ },
+ .fiq = FIQ_FLOPPYDATA,
+};
+
+static dma_t sound_dma = {
+ .d_ops = &sound_dma_ops,
+};
+
+static int __init rpc_dma_init(void)
{
+ unsigned int i;
+ int ret;
+
iomd_writeb(0, IOMD_IO0CR);
iomd_writeb(0, IOMD_IO1CR);
iomd_writeb(0, IOMD_IO2CR);
iomd_writeb(0xa0, IOMD_DMATCR);
- dma[DMA_0].dma_base = IOMD_IO0CURA;
- dma[DMA_0].dma_irq = IRQ_DMA0;
- dma[DMA_0].d_ops = &iomd_dma_ops;
- dma[DMA_1].dma_base = IOMD_IO1CURA;
- dma[DMA_1].dma_irq = IRQ_DMA1;
- dma[DMA_1].d_ops = &iomd_dma_ops;
- dma[DMA_2].dma_base = IOMD_IO2CURA;
- dma[DMA_2].dma_irq = IRQ_DMA2;
- dma[DMA_2].d_ops = &iomd_dma_ops;
- dma[DMA_3].dma_base = IOMD_IO3CURA;
- dma[DMA_3].dma_irq = IRQ_DMA3;
- dma[DMA_3].d_ops = &iomd_dma_ops;
- dma[DMA_S0].dma_base = IOMD_SD0CURA;
- dma[DMA_S0].dma_irq = IRQ_DMAS0;
- dma[DMA_S0].d_ops = &iomd_dma_ops;
- dma[DMA_S1].dma_base = IOMD_SD1CURA;
- dma[DMA_S1].dma_irq = IRQ_DMAS1;
- dma[DMA_S1].d_ops = &iomd_dma_ops;
- dma[DMA_VIRTUAL_FLOPPY].dma_irq = FIQ_FLOPPYDATA;
- dma[DMA_VIRTUAL_FLOPPY].d_ops = &floppy_dma_ops;
- dma[DMA_VIRTUAL_SOUND].d_ops = &sound_dma_ops;
-
/*
* Setup DMA channels 2,3 to be for podules
* and channels 0,1 for internal devices
*/
iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
+
+ iomd_dma[DMA_0].base = IOMD_IO0CURA;
+ iomd_dma[DMA_0].irq = IRQ_DMA0;
+ iomd_dma[DMA_1].base = IOMD_IO1CURA;
+ iomd_dma[DMA_1].irq = IRQ_DMA1;
+ iomd_dma[DMA_2].base = IOMD_IO2CURA;
+ iomd_dma[DMA_2].irq = IRQ_DMA2;
+ iomd_dma[DMA_3].base = IOMD_IO3CURA;
+ iomd_dma[DMA_3].irq = IRQ_DMA3;
+ iomd_dma[DMA_S0].base = IOMD_SD0CURA;
+ iomd_dma[DMA_S0].irq = IRQ_DMAS0;
+ iomd_dma[DMA_S1].base = IOMD_SD1CURA;
+ iomd_dma[DMA_S1].irq = IRQ_DMAS1;
+
+ for (i = DMA_0; i <= DMA_S1; i++) {
+ iomd_dma[i].dma.d_ops = &iomd_dma_ops;
+
+ ret = isa_dma_add(i, &iomd_dma[i].dma);
+ if (ret)
+ printk("IOMDDMA%u: unable to register: %d\n", i, ret);
+ }
+
+ ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
+ if (ret)
+ printk("IOMDFLOPPY: unable to register: %d\n", ret);
+ ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
+ if (ret)
+ printk("IOMDSOUND: unable to register: %d\n", ret);
+ return 0;
}
+core_initcall(rpc_dma_init);
#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY
+#define IOMD_DMA_BOUNDARY (PAGE_SIZE - 1)
+
#endif /* _ASM_ARCH_DMA_H */
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
iomd_writeb(0, IOMD_ROMCR0);
--- /dev/null
+/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO bank numbering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA (32*0)
+#define S3C2410_GPIO_BANKB (32*1)
+#define S3C2410_GPIO_BANKC (32*2)
+#define S3C2410_GPIO_BANKD (32*3)
+#define S3C2410_GPIO_BANKE (32*4)
+#define S3C2410_GPIO_BANKF (32*5)
+#define S3C2410_GPIO_BANKG (32*6)
+#define S3C2410_GPIO_BANKH (32*7)
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#include <asm-generic/gpio.h>
+#include <mach/gpio-nrs.h>
+
+#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
#define IRQ_EINT22 S3C2410_IRQ(50)
#define IRQ_EINT23 S3C2410_IRQ(51)
-
+#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4)
#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
#define IRQ_LCD_FIFO S3C2410_IRQ(52)
#ifndef __ASM_ARCH_REGS_GPIO_H
#define __ASM_ARCH_REGS_GPIO_H
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKA (32*0)
-#define S3C2410_GPIO_BANKB (32*1)
-#define S3C2410_GPIO_BANKC (32*2)
-#define S3C2410_GPIO_BANKD (32*3)
-#define S3C2410_GPIO_BANKE (32*4)
-#define S3C2410_GPIO_BANKF (32*5)
-#define S3C2410_GPIO_BANKG (32*6)
-#define S3C2410_GPIO_BANKH (32*7)
+#include <mach/gpio-nrs.h>
#ifdef CONFIG_CPU_S3C2400
#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x)
extern void (*s3c24xx_reset_hook)(void);
static void
-arch_reset(char mode)
+arch_reset(char mode, const char *cmd)
{
struct clk *wdtclk;
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
- s3c2410_pm_init();
+ s3c_pm_init();
}
static void __init h1940_init_irq(void)
s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
- s3c2410_pm_init();
+ s3c_pm_init();
}
MACHINE_START(QT2410, "QT2410")
#include <plat/cpu.h>
#include <plat/pm.h>
-#ifdef CONFIG_S3C2410_PM_DEBUG
-extern void pm_dbg(const char *fmt, ...);
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
static void s3c2410_pm_prepare(void)
{
/* ensure at least GSTATUS3 has the resume address */
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3);
- DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
- DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+ S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+ S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
if (machine_is_h1940()) {
void *base = phys_to_virt(H1940_SUSPEND_CHECK);
* correct address to resume from. */
__raw_writel(0x2BED, S3C2412_INFORM0);
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1);
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
return 0;
}
/* initialise the power management now we've setup everything. */
- s3c2410_pm_init();
+ s3c_pm_init();
s3c_device_nand.dev.platform_data = &jive_nand_info;
static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
{
- s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
return 0;
}
tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
__raw_writel(tmp, S3C2412_PWRCFG);
- s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
return 0;
}
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
- s3c2410_pm_init();
+ s3c_pm_init();
s3c24xx_fb_set_platdata(&rx3715_fb_info);
platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
#define IRQ_EINT17 S3C2410_IRQ(49)
#define IRQ_EINT18 S3C2410_IRQ(50)
+#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00)
+
/* SUB IRQS */
#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */
#define IRQ_S3CUART_TX0 S3C2410_IRQ(52)
#define S3C64XX_PA_VIC0 (0x71200000)
#define S3C64XX_PA_VIC1 (0x71300000)
+#define S3C64XX_PA_MODEM (0x74108000)
+#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000)
+
/* place VICs close together */
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* nothing here yet */
}
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
{
/* nothing here yet */
}
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
<http://www.compaq.com/products/handhelds/pocketpc/>
-config SA1100_H3800
- bool "Compaq iPAQ H3800"
- help
- Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
- series handheld computer. Information about this machine and the
- Linux port to this machine can be found at:
-
- <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
- <http://www.compaq.com/products/handhelds/pocketpc/>
-
config SA1100_H3XXX
bool
- depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
+ depends on SA1100_H3100 || SA1100_H3600
default y
config SA1100_BADGE4
This isn't for audio support, but for attached sensors and
other devices, eg for BadgePAD 4 sensor support.
-config H3600_SLEEVE
- tristate "Compaq iPAQ Handheld sleeve support"
- depends on SA1100_H3100 || SA1100_H3600
- help
- Choose this option to enable support for extension packs (sleeves)
- for the Compaq iPAQ H3XXX series of handheld computers. This option
- is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension
- packs.
-
endmenu
endif
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
.remove = collie_uart_remove,
};
-static int __init collie_uart_init(void) {
+static int __init collie_uart_init(void)
+{
return locomo_driver_register(&collie_uart_driver);
}
device_initcall(collie_uart_init);
}
};
+static int collie_flash_init(void)
+{
+ int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
+ if (rc)
+ return rc;
+
+ rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
+ if (rc)
+ gpio_free(COLLIE_GPIO_VPEN);
+
+ return rc;
+}
+
static void collie_set_vpp(int vpp)
{
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
- if (vpp)
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
- else
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+ gpio_set_value(COLLIE_GPIO_VPEN, vpp);
+}
+
+static void collie_flash_exit(void)
+{
+ gpio_free(COLLIE_GPIO_VPEN);
}
static struct flash_platform_data collie_flash_data = {
.map_name = "cfi_probe",
+ .init = collie_flash_init,
.set_vpp = collie_set_vpp,
+ .exit = collie_flash_exit,
.parts = collie_partitions,
.nr_parts = ARRAY_SIZE(collie_partitions),
};
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <asm/irq.h>
#include <mach/hardware.h>
return;
}
+ gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
+ gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
+
ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
COLLIE_TC35143_GPIO_BBAT_ON);
return;
static void collie_charge(int on)
{
- extern struct platform_device colliescoop_device;
-
/* Zaurus seems to contain LTC1731; it should know when to
* stop charging itself, so setting charge on should be
* relatively harmless (as long as it is not done too often).
*/
- if (on) {
- set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
- } else {
- reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
- }
+ gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
}
static void collie_discharge(int on)
#include <asm/mach/serial_sa1100.h>
#include <mach/h3600.h>
-
-#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
#include <mach/h3600_gpio.h>
-#endif
-
-#ifdef CONFIG_SA1100_H3800
-#include <mach/h3600_asic.h>
-#endif
#include "generic.h"
-struct ipaq_model_ops ipaq_model_ops;
-EXPORT_SYMBOL(ipaq_model_ops);
+void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
+EXPORT_SYMBOL(assign_h3600_egpio);
static struct mtd_partition h3xxx_partitions[] = {
{
.offset = 0,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
-#ifdef CONFIG_MTD_2PARTS_IPAQ
- .name = "H3XXX root jffs2",
+ .name = "H3XXX rootfs",
.size = MTDPART_SIZ_FULL,
.offset = 0x00040000,
-#else
- .name = "H3XXX kernel",
- .size = 0x00080000,
- .offset = 0x00040000,
- }, {
- .name = "H3XXX params",
- .size = 0x00040000,
- .offset = 0x000C0000,
- }, {
-#ifdef CONFIG_JFFS2_FS
- .name = "H3XXX root jffs2",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00100000,
-#else
- .name = "H3XXX initrd",
- .size = 0x00100000,
- .offset = 0x00100000,
- }, {
- .name = "H3XXX root cramfs",
- .size = 0x00300000,
- .offset = 0x00200000,
- }, {
- .name = "H3XXX usr cramfs",
- .size = 0x00800000,
- .offset = 0x00500000,
- }, {
- .name = "H3XXX usr local",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00d00000,
-#endif
-#endif
}
};
static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
{
- if (speed < 4000000) {
- clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
- } else {
- set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
- }
+ assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
}
static struct irda_platform_data h3600_irda_data = {
sa1100fb_lcd_power = h3xxx_lcd_power;
}
-static __inline__ void do_blank(int setp)
-{
- if (ipaq_model_ops.blank_callback)
- ipaq_model_ops.blank_callback(1-setp);
-}
-
/************************* H3100 *************************/
#ifdef CONFIG_SA1100_H3100
case IPAQ_EGPIO_LCD_POWER:
egpio |= EGPIO_H3600_LCD_ON;
gpio |= GPIO_H3100_LCD_3V_ON;
- do_blank(setp);
break;
case IPAQ_EGPIO_LCD_ENABLE:
break;
}
}
-static unsigned long h3100_read_egpio(void)
-{
- return h3100_egpio;
-}
-
-static int h3100_pm_callback(int req)
-{
- if (ipaq_model_ops.pm_callback_aux)
- return ipaq_model_ops.pm_callback_aux(req);
- return 0;
-}
-
-static struct ipaq_model_ops h3100_model_ops __initdata = {
- .generic_name = "3100",
- .control = h3100_control_egpio,
- .read = h3100_read_egpio,
- .pm_callback = h3100_pm_callback
-};
-
#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
| GPIO_H3100_GPIO3 \
| GPIO_H3100_QMUTE \
GAFR &= ~H3100_DIRECT_EGPIO;
H3100_EGPIO = h3100_egpio;
- ipaq_model_ops = h3100_model_ops;
+ assign_h3600_egpio = h3100_control_egpio;
}
MACHINE_START(H3100, "Compaq iPAQ H3100")
EGPIO_H3600_LCD_PCI |
EGPIO_H3600_LCD_5V_ON |
EGPIO_H3600_LVDD_ON;
- do_blank(setp);
break;
case IPAQ_EGPIO_LCD_ENABLE:
break;
}
}
-static unsigned long h3600_read_egpio(void)
-{
- return h3600_egpio;
-}
-
-static int h3600_pm_callback(int req)
-{
- if (ipaq_model_ops.pm_callback_aux)
- return ipaq_model_ops.pm_callback_aux(req);
- return 0;
-}
-
-static struct ipaq_model_ops h3600_model_ops __initdata = {
- .generic_name = "3600",
- .control = h3600_control_egpio,
- .read = h3600_read_egpio,
- .pm_callback = h3600_pm_callback
-};
-
static void __init h3600_map_io(void)
{
h3xxx_map_io();
GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
- ipaq_model_ops = h3600_model_ops;
+ assign_h3600_egpio = h3600_control_egpio;
}
MACHINE_START(H3600, "Compaq iPAQ H3600")
#endif /* CONFIG_SA1100_H3600 */
-#ifdef CONFIG_SA1100_H3800
-
-#define SET_ASIC1(x) \
- do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
-
-#define SET_ASIC2(x) \
- do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
-
-#define CLEAR_ASIC1(x) \
- do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
-
-#define CLEAR_ASIC2(x) \
- do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
-
-
-/*
- On screen enable, we get
-
- h3800_video_power_on(1)
- LCD controller starts
- h3800_video_lcd_enable(1)
-
- On screen disable, we get
-
- h3800_video_lcd_enable(0)
- LCD controller stops
- h3800_video_power_on(0)
-*/
-
-
-static void h3800_video_power_on(int setp)
-{
- if (setp) {
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
- msleep(30);
- H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
- msleep(5);
- H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
- msleep(50);
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
- msleep(5);
- } else {
- msleep(5);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
- msleep(50);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
- msleep(5);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
- msleep(100);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
- }
-}
-
-static void h3800_video_lcd_enable(int setp)
-{
- if (setp) {
- msleep(17); // Wait one from before turning on
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
- } else {
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
- msleep(30); // Wait before turning off
- }
-}
-
-
-static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
-{
- switch (x) {
- case IPAQ_EGPIO_LCD_POWER:
- h3800_video_power_on(setp);
- break;
- case IPAQ_EGPIO_LCD_ENABLE:
- h3800_video_lcd_enable(setp);
- break;
- case IPAQ_EGPIO_CODEC_NRESET:
- case IPAQ_EGPIO_AUDIO_ON:
- case IPAQ_EGPIO_QMUTE:
- printk("%s: error - should not be called\n", __func__);
- break;
- case IPAQ_EGPIO_OPT_NVRAM_ON:
- SET_ASIC2(GPIO2_OPT_ON_NVRAM);
- break;
- case IPAQ_EGPIO_OPT_ON:
- SET_ASIC2(GPIO2_OPT_ON);
- break;
- case IPAQ_EGPIO_CARD_RESET:
- SET_ASIC2(GPIO2_OPT_PCM_RESET);
- break;
- case IPAQ_EGPIO_OPT_RESET:
- SET_ASIC2(GPIO2_OPT_RESET);
- break;
- case IPAQ_EGPIO_IR_ON:
- CLEAR_ASIC1(GPIO1_IR_ON_N);
- break;
- case IPAQ_EGPIO_IR_FSEL:
- break;
- case IPAQ_EGPIO_RS232_ON:
- SET_ASIC1(GPIO1_RS232_ON);
- break;
- case IPAQ_EGPIO_VPP_ON:
- H3800_ASIC2_FlashWP_VPP_ON = setp;
- break;
- }
-}
-
-static unsigned long h3800_read_egpio(void)
-{
- return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
-}
-
-/* We need to fix ASIC2 GPIO over suspend/resume. At the moment,
- it doesn't appear that ASIC1 GPIO has the same problem */
-
-static int h3800_pm_callback(int req)
-{
- static u16 asic1_data;
- static u16 asic2_data;
- int result = 0;
-
- printk("%s %d\n", __func__, req);
-
- switch (req) {
- case PM_RESUME:
- MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */
-
- H3800_ASIC2_GPIOPIOD = asic2_data;
- H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
- | GPIO2_SD_DETECT
- | GPIO2_EAR_IN_N
- | GPIO2_USB_DETECT_N
- | GPIO2_SD_CON_SLT;
-
- H3800_ASIC1_GPIO_OUT = asic1_data;
-
- if (ipaq_model_ops.pm_callback_aux)
- result = ipaq_model_ops.pm_callback_aux(req);
- break;
-
- case PM_SUSPEND:
- if (ipaq_model_ops.pm_callback_aux &&
- ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
- return result;
-
- asic1_data = H3800_ASIC1_GPIO_OUT;
- asic2_data = H3800_ASIC2_GPIOPIOD;
- break;
- default:
- printk("%s: unrecognized PM callback\n", __func__);
- break;
- }
- return result;
-}
-
-static struct ipaq_model_ops h3800_model_ops __initdata = {
- .generic_name = "3800",
- .control = h3800_control_egpio,
- .read = h3800_read_egpio,
- .pm_callback = h3800_pm_callback
-};
-
-#define MAX_ASIC_ISR_LOOPS 20
-
-/* The order of these is important - see #include <mach/irqs.h> */
-static u32 kpio_irq_mask[] = {
- KPIO_KEY_ALL,
- KPIO_SPI_INT,
- KPIO_OWM_INT,
- KPIO_ADC_INT,
- KPIO_UART_0_INT,
- KPIO_UART_1_INT,
- KPIO_TIMER_0_INT,
- KPIO_TIMER_1_INT,
- KPIO_TIMER_2_INT
-};
-
-static u32 gpio_irq_mask[] = {
- GPIO2_PEN_IRQ,
- GPIO2_SD_DETECT,
- GPIO2_EAR_IN_N,
- GPIO2_USB_DETECT_N,
- GPIO2_SD_CON_SLT,
-};
-
-static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
-{
- int i;
-
- if (0) printk("%s: interrupt received\n", __func__);
-
- desc->chip->ack(irq);
-
- for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
- u32 irq;
- int j;
-
- /* KPIO */
- irq = H3800_ASIC2_KPIINTFLAG;
- if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
- for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
- if (irq & kpio_irq_mask[j])
- handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
-
- /* GPIO2 */
- irq = H3800_ASIC2_GPIINTFLAG;
- if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
- for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
- if (irq & gpio_irq_mask[j])
- handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
- }
-
- if (i >= MAX_ASIC_ISR_LOOPS)
- printk("%s: interrupt processing overrun\n", __func__);
-
- /* For level-based interrupts */
- desc->chip->unmask(irq);
-
-}
-
-static struct irqaction h3800_irq = {
- .name = "h3800_asic",
- .handler = h3800_IRQ_demux,
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-u32 kpio_int_shadow = 0;
-
-
-/* mask_ack <- IRQ is first serviced.
- mask <- IRQ is disabled.
- unmask <- IRQ is enabled
-
- The INTCLR registers are poorly documented. I believe that writing
- a "1" to the register clears the specific interrupt, but the documentation
- indicates writing a "0" clears the interrupt. In any case, they shouldn't
- be read (that's the INTFLAG register)
- */
-
-static void h3800_mask_ack_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow &= ~mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
- H3800_ASIC2_KPIINTCLR = mask;
-}
-
-static void h3800_mask_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow &= ~mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_unmask_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow |= mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_mask_ack_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT &= ~mask;
- H3800_ASIC2_GPIINTCLR = mask;
-}
-
-static void h3800_mask_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT &= ~mask;
- }
-
-static void h3800_unmask_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT |= mask;
-}
-
-static void __init h3800_init_irq(void)
-{
- int i;
-
- /* Initialize standard IRQs */
- sa1100_init_irq();
-
- /* Disable all IRQs and set up clock */
- H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */
- H3800_ASIC2_GPIINTSTAT = 0;
-
- H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */
- H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */
-
-// H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */
-// H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */
-
- H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */
- H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
- H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
- H3800_ASIC2_INTR_TimerSet = 1;
-
-#if 0
- for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
- int irq = i + H3800_KPIO_IRQ_START;
- irq_desc[irq].valid = 1;
- irq_desc[irq].probe_ok = 1;
- set_irq_chip(irq, &h3800_kpio_irqchip);
- }
-
- for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
- int irq = i + H3800_GPIO_IRQ_START;
- irq_desc[irq].valid = 1;
- irq_desc[irq].probe_ok = 1;
- set_irq_chip(irq, &h3800_gpio_irqchip);
- }
-#endif
- set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
- set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
-}
-
-
-#define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */
-
-static void __init h3800_map_io(void)
-{
- h3xxx_map_io();
-
- /* Add wakeup on AC plug/unplug */
- PWER |= PWER_GPIO12;
-
- /* Initialize h3800-specific values here */
- GPCR = 0x0fffffff; /* All outputs are set low by default */
- GAFR = GPIO_H3800_CLK_OUT |
- GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
- GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
- GPDR = GPIO_H3800_CLK_OUT |
- GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
- GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
- GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
- GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
- TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */
-
- /* Fix the memory bus */
- MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
-
- /* Set up ASIC #1 */
- H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */
- H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */
- H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N;
- H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
-
- H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
- | GPIO1_RS232_ON
- | GPIO1_EAR_ON_N;
-
- /* Set up ASIC #2 */
- H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
- H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
-
- H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
- | GPIO2_SD_DETECT
- | GPIO2_EAR_IN_N
- | GPIO2_USB_DETECT_N
- | GPIO2_SD_CON_SLT;
-
- /* TODO : Set sleep states & battery fault states */
-
- /* Clear VPP Enable */
- H3800_ASIC2_FlashWP_VPP_ON = 0;
- ipaq_model_ops = h3800_model_ops;
-}
-
-MACHINE_START(H3800, "Compaq iPAQ H3800")
- .phys_io = 0x80000000,
- .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
- .boot_params = 0xc0000100,
- .map_io = h3800_map_io,
- .init_irq = h3800_init_irq,
- .timer = &sa1100_timer,
- .init_machine = h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3800 */
#define __ASM_ARCH_COLLIE_H
-#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11
+#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1)
+#define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0)
#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12
#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13
#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
-#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18
+#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7)
#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
-#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
- COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+ COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
- COLLIE_SCP_CHARGE_ON )
+#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
/* GPIOs for which the generic definition doesn't say much */
#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
/* Physical memory regions corresponding to chip selects */
#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */
};
-struct ipaq_model_ops {
- const char *generic_name;
- void (*control)(enum ipaq_egpio_type, int);
- unsigned long (*read)(void);
- void (*blank_callback)(int blank);
- int (*pm_callback)(int req); /* Primary model callback */
- int (*pm_callback_aux)(int req); /* Secondary callback (used by HAL modules) */
-};
-
-extern struct ipaq_model_ops ipaq_model_ops;
-
-static __inline__ const char * h3600_generic_name(void)
-{
- return ipaq_model_ops.generic_name;
-}
-
-static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
-{
- if (ipaq_model_ops.control)
- ipaq_model_ops.control(x,level);
-}
-
-static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
-{
- if (ipaq_model_ops.control)
- ipaq_model_ops.control(x,0);
-}
-
-static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
-{
- if (ipaq_model_ops.control)
- ipaq_model_ops.control(x,1);
-}
-
-static __inline__ unsigned long read_h3600_egpio(void)
-{
- if (ipaq_model_ops.read)
- return ipaq_model_ops.read();
- return 0;
-}
-
-static __inline__ int h3600_register_blank_callback(void (*f)(int))
-{
- ipaq_model_ops.blank_callback = f;
- return 0;
-}
-
-static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
-{
- ipaq_model_ops.blank_callback = NULL;
-}
-
-
-static __inline__ int h3600_register_pm_callback(int (*f)(int))
-{
- ipaq_model_ops.pm_callback_aux = f;
- return 0;
-}
-
-static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
-{
- ipaq_model_ops.pm_callback_aux = NULL;
-}
-
-static __inline__ int h3600_power_management(int req)
-{
- if (ipaq_model_ops.pm_callback)
- return ipaq_model_ops.pm_callback(req);
- return 0;
-}
+extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
#endif /* ASSEMBLY */
#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22)
#define GPIO_H3600_OPT_DET GPIO_GPIO (27)
-/* H3800 specific pins */
-#define GPIO_H3800_AC_IN GPIO_GPIO (12)
-#define GPIO_H3800_COM_DSR GPIO_GPIO (13)
-#define GPIO_H3800_MMC_INT GPIO_GPIO (18)
-#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */
-#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22)
-#define GPIO_H3800_CLK_OUT GPIO_GPIO (27)
-
/****************************************************/
#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
-#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18
-#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */
-
/* H3100 / 3600 EGPIO pins */
#define EGPIO_H3600_VPP_ON (1 << 0)
#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
-/********************* H3800, ASIC #2 ********************/
-
-#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT)
-#define H3800_ASIC2_OFFSET(s,x,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-#define H3800_ASIC2_NOFFSET(s,x,n,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-
-#define _H3800_ASIC2_GPIO_Base 0x0000
-#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */
-#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
-#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
-#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */
-#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */
-#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */
-#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */
-#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */
-
-#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
-#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
-#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
-#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
-#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
-#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data )
-#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
-#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
-#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
-
-#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */
-#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */
-#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */
-#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */
-#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */
-#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */
-#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */
-#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */
-#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */
-#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */
-#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */
-#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */
-
-#define _H3800_ASIC2_KPIO_Base 0x0200
-#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */
-#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
-#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
-#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */
-#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */
-#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */
-
-#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction )
-#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
-#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
-#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
-#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
-#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
-#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data )
-#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
-#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
-#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
-
-#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 )
-#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 )
-#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 )
-#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 )
-#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 )
-#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 )
-#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 )
-#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 )
-
-#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */
-#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */
-#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */
-#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */
-#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */
-#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */
-#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */
-#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */
-#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */
-#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */
-#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */
-#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */
-
-/* Alternate KPIO functions (set by default) */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */
-
-#define _H3800_ASIC2_SPI_Base 0x0400
-#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */
-
-#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control )
-#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data )
-#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
-
-#define _H3800_ASIC2_PWM_0_Base 0x0600
-#define _H3800_ASIC2_PWM_1_Base 0x0700
-#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */
-#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */
-#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */
-
-#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase )
-#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
-#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
-
-#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase )
-#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
-#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
-
-#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */
-#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */
-#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */
-
-#define _H3800_ASIC2_LED_0_Base 0x0800
-#define _H3800_ASIC2_LED_1_Base 0x0880
-#define _H3800_ASIC2_LED_2_Base 0x0900
-#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */
-#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */
-#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */
-#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */
-
-#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase )
-#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
-#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
-#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
-
-#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase )
-#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
-#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
-#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
-
-#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase )
-#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
-#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
-#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
-
-#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */
-#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */
-#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 )
-#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */
-
-#define _H3800_ASIC2_UART_0_Base 0x0A00
-#define _H3800_ASIC2_UART_1_Base 0x0C00
-#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */
-#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */
-#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */
-#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */
-
-#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive )
-#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit )
-#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable )
-#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify )
-#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl )
-#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl )
-#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus )
-#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus )
-#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad )
-#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL )
-#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH )
-
-#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive )
-#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit )
-#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable )
-#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify )
-#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl )
-#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl )
-#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus )
-#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus )
-#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad )
-#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL )
-#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH )
-
-#define _H3800_ASIC2_TIMER_Base 0x0E00
-#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */
-
-#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command )
-
-#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */
-#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */
-#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */
-#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */
-#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */
-#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */
-#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */
-#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */
-
-#define _H3800_ASIC2_CLOCK_Base 0x1000
-#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */
-
-#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
-
-#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
-#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */
-#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */
-#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */
-#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */
-#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */
-#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */
-#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */
-#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */
-#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */
-#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */
-#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */
-#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */
-
-#define _H3800_ASIC2_ADC_Base 0x1200
-#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */
-#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */
-
-#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer )
-#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus )
-#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data )
-
-#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */
-#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */
-
-#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */
-#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 )
-#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 )
-#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */
-#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */
-
-
-#define _H3800_ASIC2_INTR_Base 0x1600
-#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */
-#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */
-#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */
-
-#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
-#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
-#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
-
-#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */
-#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 )
-#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 )
-#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 )
-#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 )
-
-#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */
-#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */
-
-
-#define _H3800_ASIC2_OWM_Base 0x1800
-#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */
-#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */
-#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */
-#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */
-#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */
-
-#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command )
-#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data )
-#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
-#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
-#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
-
-#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */
-#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */
-#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */
-#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */
-
-#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */
-#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */
-#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */
-#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */
-#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */
-
-#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */
-#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */
-#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */
-
-#define _H3800_ASIC2_FlashCtl_Base 0x1A00
-
-/****************************************************/
-/* H3800, ASIC #1
- * This ASIC is accesed through ASIC #2, and
- * mapped into the 1c00 - 1f00 region
- */
-
-#define H3800_ASIC1_OFFSET(s,x,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
-
-#define _H3800_ASIC1_MMC_Base 0x1c00
-
-#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */
-#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */
-#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */
-#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */
-#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */
-#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */
-#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */
-#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */
-#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */
-#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */
-#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */
-#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */
-#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */
-
-#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock )
-#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status )
-#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate )
-#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister )
-#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont )
-#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout )
-#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
-#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
-#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
-#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask )
-#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber )
-#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
-#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
-#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
-#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull )
-
-#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */
-#define H3800_ASIC1_MMC_START_CLOCK (1 << 1)
-
-#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0)
-#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1)
-#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2)
-#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3)
-#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */
-#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5)
-#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6)
-#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7)
-#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */
-#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */
-#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */
-#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */
-
-#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */
-#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */
-#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */
-#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */
-
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */
-
-#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0)
-#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1)
-#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2)
-#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3)
-
-#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0)
-
-/********* GPIO **********/
-
-#define _H3800_ASIC1_GPIO_Base 0x1e00
-
-#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */
-#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */
-#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */
-#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */
-#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */
-#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */
-#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */
-#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */
-#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */
-#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */
-#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */
-#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */
-#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */
-#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */
-#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */
-#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */
-
-#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask )
-#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out )
-#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
-#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
-#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
-#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
-#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
-#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State )
-#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset )
-#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
-#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
-#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
-#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status )
-#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
-#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
-
-#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0)
-#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1)
-#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2)
-#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3)
-#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4)
-#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5)
-
-#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0)
-#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1)
-#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2)
-
-/* These are all outputs */
-#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */
-#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */
-#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */
-#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */
-#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */
-#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */
-#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */
-#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */
-#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */
-#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */
-#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */
-#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */
-#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */
-#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */
-#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */
-
-/* Write enable for the flash */
-
-#define _H3800_ASIC1_FlashWP_Base 0x1F00
-#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */
-#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
#endif /* _INCLUDE_H3600_GPIO_H_ */
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS (IRQ_BOARD_END)
#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
#else
#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
-#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT 9
-
-#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT 5
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if (mode == 's') {
/* Jump into ROM at address 0 */
.id = -1,
};
+static struct platform_device jornada_kbd_device = {
+ .name = "jornada720_kbd",
+ .id = -1,
+};
+
+static struct platform_device jornada_ts_device = {
+ .name = "jornada_ts",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
-#ifdef CONFIG_SA1100_JORNADA720_SSP
&jornada_ssp_device,
-#endif
&s1d13xxxfb_device,
+ &jornada_kbd_device,
+ &jornada_ts_device,
};
static int __init jornada720_init(void)
#include <asm/leds.h>
#include <asm/param.h>
-#include <mach/hardware.h>
-
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#define IO_BASE 0xe0000000
+#define IO_SIZE 0x08000000
+#define IO_START 0x40000000
+#define ROMCARD_SIZE 0x08000000
+#define ROMCARD_START 0x10000000
+
+void arch_reset(char mode, const char *cmd)
+{
+ short temp;
+ local_irq_disable();
+ /* Reset the Machine via pc[3] of the sequoia chipset */
+ outw(0x09,0x24);
+ temp=inw(0x26);
+ temp = temp | (1<<3) | (1<<10);
+ outw(0x09,0x24);
+ outw(temp,0x26);
+}
+
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
},
};
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0x70,
+ .end = 0x73,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = IRQ_ISA_RTC_ALARM,
+ .end = IRQ_ISA_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+};
+
static int __init shark_init(void)
{
int ret;
if (machine_is_shark())
+ {
+ ret = platform_device_register(&rtc_device);
+ if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
ret = platform_device_register(&serial_device);
-
- return ret;
+ if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
+ }
+ return 0;
}
arch_initcall(shark_init);
#include <asm/dma.h>
#include <asm/mach/dma.h>
-void __init arch_dma_init(dma_t *dma)
+static int __init shark_dma_init(void)
{
#ifdef CONFIG_ISA_DMA
- isa_init_dma(dma);
+ isa_init_dma();
#endif
+ return 0;
}
+core_initcall(shark_dma_init);
bne 1001b
.endm
- .macro waituart,rd,rx
- .endm
--- /dev/null
+/*
+ * arch/arm/mach-shark/include/mach/framebuffer.h
+ *
+ * by Alexander Schulz
+ *
+ */
+
+#ifndef __ASM_ARCH_FRAMEBUFFER_H
+#define __ASM_ARCH_FRAMEBUFFER_H
+
+/* defines for the Framebuffer */
+#define FB_START 0x06000000
+#define FB_SIZE 0x01000000
+
+#endif
+
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE 0xe0000000
-
-#else
-
-#define IO_BASE 0
-
-#endif
-
-#define IO_SIZE 0x08000000
-#define IO_START 0x40000000
-#define ROMCARD_SIZE 0x08000000
-#define ROMCARD_START 0x10000000
-
-
-/* defines for the Framebuffer */
-#define FB_START 0x06000000
-#define FB_SIZE 0x01000000
-
#define UNCACHEABLE_ADDR 0xdf010000
-#define SEQUOIA_LED_GREEN (1<<6)
-#define SEQUOIA_LED_AMBER (1<<5)
-#define SEQUOIA_LED_BACK (1<<7)
-
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x6000
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define PCIO_BASE 0xe0000000
-#define IO_SPACE_LIMIT 0xffffffff
+#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(addr) (addr)
+#define __io(a) ((void __iomem *)(0xe0000000 + (a)))
+
+#define __mem_pci(addr) (addr)
#endif
#define NR_IRQS 16
#define IRQ_ISA_KEYBOARD 1
-#define RTC_IRQ 8
+#define IRQ_ISA_RTC_ALARM 8
#define I8042_KBD_IRQ 1
#define I8042_AUX_IRQ 12
#define IRQ_HARDDISK 14
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev / .properties
- * in OpenFirmware.
- */
#define MAX_DMA_CHANNELS 8
#define DMA_ISA_CASCADE 4
{
if (node != 0) return;
/* Only the first 4 MB (=1024 Pages) are usable for DMA */
+ /* See dev / -> .properties in OpenFirmware. */
zone_size[1] = zone_size[0] - 1024;
zone_size[0] = 1024;
zhole_size[1] = zhole_size[0];
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-
-static void arch_reset(char mode)
-{
- short temp;
- local_irq_disable();
- /* Reset the Machine via pc[3] of the sequoia chipset */
- outw(0x09,0x24);
- temp=inw(0x26);
- temp = temp | (1<<3) | (1<<10);
- outw(0x09,0x24);
- outw(temp,0x26);
-
-}
+/* Found in arch/mach-shark/core.c */
+extern void arch_reset(char mode, const char *cmd);
static inline void arch_idle(void)
{
static inline void putc(int c)
{
- int t;
+ volatile int t;
SERIAL_BASE[0] = c;
t=0x10000;
#include <linux/ioport.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
+
+#define SEQUOIA_LED_GREEN (1<<6)
+#define SEQUOIA_LED_AMBER (1<<5)
+#define SEQUOIA_LED_BACK (1<<7)
+
static char led_state;
static short hw_led_state;
static short saved_state;
static struct platform_device versatile_i2c_device = {
.name = "versatile-i2c",
- .id = -1,
+ .id = 0,
.num_resources = 1,
.resource = &versatile_i2c_resource,
};
+static struct i2c_board_info versatile_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+ .type = "ds1338",
+ },
+};
+
+static int __init versatile_i2c_init(void)
+{
+ return i2c_register_board_info(0, versatile_i2c_board_info,
+ ARRAY_SIZE(versatile_i2c_board_info));
+}
+arch_initcall(versatile_i2c_init);
+
#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
unsigned int mmc_status(struct device *dev)
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
u32 val;
extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
extern void w90p910_init_clocks(int xtal);
extern void w90p910_map_io(struct map_desc *mach_desc, int size);
+extern struct platform_device w90p910_serial_device;
extern struct sys_timer w90x900_timer;
-#define W90X900_RES(name) \
-struct resource w90x900_##name##_resource[] = { \
- [0] = { \
- .start = name##_PA, \
- .end = name##_PA + 0x0ff, \
- .flags = IORESOURCE_MEM, \
- }, \
- [1] = { \
- .start = IRQ_##name, \
- .end = IRQ_##name, \
- .flags = IORESOURCE_IRQ, \
- } \
-}
-
-#define W90X900_DEVICE(devname, regname, devid, platdevname) \
-struct platform_device w90x900_##devname = { \
- .name = platdevname, \
- .id = devid, \
- .num_resources = ARRAY_SIZE(w90x900_##regname##_resource), \
- .resource = w90x900_##regname##_resource, \
-}
-
-#define W90X900_UARTCFG(port, flag, uc, ulc, ufc) \
-{ \
- .hwport = port, \
- .flags = flag, \
- .ucon = uc, \
- .ulcon = ulc, \
- .ufcon = ufc, \
+#define W90X900_8250PORT(name) \
+{ \
+ .membase = name##_BA, \
+ .mapbase = name##_PA, \
+ .irq = IRQ_##name, \
+ .uartclk = 11313600, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
}
{
}
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include "cpu.h"
+/*w90p910 evb norflash driver data */
-static struct map_desc w90p910_iodesc[] __initdata = {
+#define W90P910_FLASH_BASE 0xA0000000
+#define W90P910_FLASH_SIZE 0x400000
+
+static struct mtd_partition w90p910_flash_partitions[] = {
+ {
+ .name = "NOR Partition 1 for kernel (960K)",
+ .size = 0xF0000,
+ .offset = 0x10000,
+ },
+ {
+ .name = "NOR Partition 2 for image (1M)",
+ .size = 0x100000,
+ .offset = 0x100000,
+ },
+ {
+ .name = "NOR Partition 3 for user (2M)",
+ .size = 0x200000,
+ .offset = 0x00200000,
+ }
};
-static struct w90x900_uartcfg w90p910_uartcfgs[] = {
- W90X900_UARTCFG(0, 0, 0, 0, 0),
- W90X900_UARTCFG(1, 0, 0, 0, 0),
- W90X900_UARTCFG(2, 0, 0, 0, 0),
- W90X900_UARTCFG(3, 0, 0, 0, 0),
- W90X900_UARTCFG(4, 0, 0, 0, 0),
+static struct physmap_flash_data w90p910_flash_data = {
+ .width = 2,
+ .parts = w90p910_flash_partitions,
+ .nr_parts = ARRAY_SIZE(w90p910_flash_partitions),
+};
+
+static struct resource w90p910_flash_resources[] = {
+ {
+ .start = W90P910_FLASH_BASE,
+ .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device w90p910_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &w90p910_flash_data,
+ },
+ .resource = w90p910_flash_resources,
+ .num_resources = ARRAY_SIZE(w90p910_flash_resources),
+};
+
+static struct map_desc w90p910_iodesc[] __initdata = {
};
/*Here should be your evb resourse,such as LCD*/
static struct platform_device *w90p910evb_dev[] __initdata = {
+ &w90p910_serial_device,
+ &w90p910_flash_device,
};
static void __init w90p910evb_map_io(void)
{
w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
w90p910_init_clocks(0);
- w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs));
}
static void __init w90p910evb_init(void)
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/serial_8250.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "cpu.h"
-/*W90P910 has five uarts*/
-
-#define MAX_UART_COUNT 5
-static int uart_count;
-static struct platform_device *uart_devs[MAX_UART_COUNT-1];
-
/* Initial IO mappings */
static struct map_desc w90p910_iodesc[] __initdata = {
/*IODESC_ENT(LCD),*/
};
-/*Init the dev resource*/
-
-static W90X900_RES(UART0);
-static W90X900_RES(UART1);
-static W90X900_RES(UART2);
-static W90X900_RES(UART3);
-static W90X900_RES(UART4);
-static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart");
-static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart");
-static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart");
-static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart");
-static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart");
-
-static struct platform_device *uart_devices[] __initdata = {
- &w90x900_uart0,
- &w90x900_uart1,
- &w90x900_uart2,
- &w90x900_uart3,
- &w90x900_uart4
-};
+/* Initial serial platform data */
-/*Init W90P910 uart device*/
+struct plat_serial8250_port w90p910_uart_data[] = {
+ W90X900_8250PORT(UART0),
+};
-void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no)
-{
- struct platform_device *platdev;
- int uart, uartdev;
-
- /*By min() to judge count of uart be used indeed*/
-
- uartdev = ARRAY_SIZE(uart_devices);
- no = min(uartdev, no);
-
- for (uart = 0; uart < no; uart++, cfg++) {
- if (cfg->hwport != uart)
- printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart);
- platdev = uart_devices[cfg->hwport];
- uart_devs[uart] = platdev;
- platdev->dev.platform_data = cfg;
- }
- uart_count = uart;
-}
+struct platform_device w90p910_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = w90p910_uart_data,
+ },
+};
/*Init W90P910 evb io*/
static int __init w90x900_arch_init(void)
{
- int ret;
-
- ret = w90p910_init_cpu();
- if (ret != 0)
- return ret;
-
- return platform_add_devices(uart_devs, uart_count);
-
+ return w90p910_init_cpu();
}
arch_initcall(w90x900_arch_init);
select CPU_TLB_V4WBI if MMU
select IO_36
+# Marvell PJ1 (Mohawk)
+config CPU_MOHAWK
+ bool
+ select CPU_32v5
+ select CPU_ABRT_EV5T
+ select CPU_PABRT_NOIFAR
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
+ select CPU_TLB_V4WBI if MMU
+ select CPU_COPY_V4WB if MMU
+
# Feroceon
config CPU_FEROCEON
bool
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7 || CPU_FA526
+ depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
help
Say Y here to disable branch prediction. If unsure, say N.
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
- depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || REALVIEW_EB_A9MP
+ depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
+ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
default y
select OUTER_CACHE
help
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o
obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o
obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o
obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
+obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o
obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
#include <linux/init.h>
#include <asm/cacheflush.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
#include <plat/cache-feroceon-l2.h>
-
+#include "mm.h"
/*
* Low-level cache maintenance operations.
* The range operations require two successive cp15 writes, in
* between which we don't want to be preempted.
*/
+
+static inline unsigned long l2_start_va(unsigned long paddr)
+{
+#ifdef CONFIG_HIGHMEM
+ /*
+ * Let's do our own fixmap stuff in a minimal way here.
+ * Because range ops can't be done on physical addresses,
+ * we simply install a virtual mapping for it only for the
+ * TLB lookup to occur, hence no need to flush the untouched
+ * memory mapping. This is protected with the disabling of
+ * interrupts by the caller.
+ */
+ unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
+ unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
+ local_flush_tlb_kernel_page(vaddr);
+ return vaddr + (paddr & ~PAGE_MASK);
+#else
+ return __phys_to_virt(paddr);
+#endif
+}
+
static inline void l2_clean_pa(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
}
-static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
+static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
+ unsigned long va_start, va_end, flags;
/*
* Make sure 'start' and 'end' reference the same page, as
BUG_ON((start ^ end) >> PAGE_SHIFT);
raw_local_irq_save(flags);
+ va_start = l2_start_va(start);
+ va_end = va_start + (end - start);
__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
"mcr p15, 1, %1, c15, c9, 5"
- : : "r" (start), "r" (end));
+ : : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
}
-static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
-{
- l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-}
-
static inline void l2_clean_inv_pa(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
__asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
}
-static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
+static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
+ unsigned long va_start, va_end, flags;
/*
* Make sure 'start' and 'end' reference the same page, as
BUG_ON((start ^ end) >> PAGE_SHIFT);
raw_local_irq_save(flags);
+ va_start = l2_start_va(start);
+ va_end = va_start + (end - start);
__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
"mcr p15, 1, %1, c15, c11, 5"
- : : "r" (start), "r" (end));
+ : : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
}
-static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
-{
- l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-}
-
/*
* Linux primitives.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
#include <asm/system.h>
#include <asm/cputype.h>
#include <asm/cacheflush.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include "mm.h"
#define CR_L2 (1 << 26)
__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
}
-static inline void xsc3_l2_clean_pa(unsigned long addr)
-{
- xsc3_l2_clean_mva(__phys_to_virt(addr));
-}
-
static inline void xsc3_l2_inv_mva(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
}
-static inline void xsc3_l2_inv_pa(unsigned long addr)
-{
- xsc3_l2_inv_mva(__phys_to_virt(addr));
-}
-
static inline void xsc3_l2_inv_all(void)
{
unsigned long l2ctype, set_way;
dsb();
}
+#ifdef CONFIG_HIGHMEM
+#define l2_map_save_flags(x) raw_local_save_flags(x)
+#define l2_map_restore_flags(x) raw_local_irq_restore(x)
+#else
+#define l2_map_save_flags(x) ((x) = 0)
+#define l2_map_restore_flags(x) ((void)(x))
+#endif
+
+static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
+ unsigned long flags)
+{
+#ifdef CONFIG_HIGHMEM
+ unsigned long va = prev_va & PAGE_MASK;
+ unsigned long pa_offset = pa << (32 - PAGE_SHIFT);
+ if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) {
+ /*
+ * Switching to a new page. Because cache ops are
+ * using virtual addresses only, we must put a mapping
+ * in place for it. We also enable interrupts for a
+ * short while and disable them again to protect this
+ * mapping.
+ */
+ unsigned long idx;
+ raw_local_irq_restore(flags);
+ idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
+ va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ raw_local_irq_restore(flags | PSR_I_BIT);
+ set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
+ local_flush_tlb_kernel_page(va);
+ }
+ return va + (pa_offset >> (32 - PAGE_SHIFT));
+#else
+ return __phys_to_virt(pa);
+#endif
+}
+
static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
{
+ unsigned long vaddr, flags;
+
if (start == 0 && end == -1ul) {
xsc3_l2_inv_all();
return;
}
+ vaddr = -1; /* to force the first mapping */
+ l2_map_save_flags(flags);
+
/*
* Clean and invalidate partial first cache line.
*/
if (start & (CACHE_LINE_SIZE - 1)) {
- xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1));
- xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+ vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
+ xsc3_l2_clean_mva(vaddr);
+ xsc3_l2_inv_mva(vaddr);
start = (start | (CACHE_LINE_SIZE - 1)) + 1;
}
/*
- * Clean and invalidate partial last cache line.
+ * Invalidate all full cache lines between 'start' and 'end'.
*/
- if (start < end && (end & (CACHE_LINE_SIZE - 1))) {
- xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
- xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
- end &= ~(CACHE_LINE_SIZE - 1);
+ while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
+ vaddr = l2_map_va(start, vaddr, flags);
+ xsc3_l2_inv_mva(vaddr);
+ start += CACHE_LINE_SIZE;
}
/*
- * Invalidate all full cache lines between 'start' and 'end'.
+ * Clean and invalidate partial last cache line.
*/
- while (start < end) {
- xsc3_l2_inv_pa(start);
- start += CACHE_LINE_SIZE;
+ if (start < end) {
+ vaddr = l2_map_va(start, vaddr, flags);
+ xsc3_l2_clean_mva(vaddr);
+ xsc3_l2_inv_mva(vaddr);
}
+ l2_map_restore_flags(flags);
+
dsb();
}
static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
{
+ unsigned long vaddr, flags;
+
+ vaddr = -1; /* to force the first mapping */
+ l2_map_save_flags(flags);
+
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
- xsc3_l2_clean_pa(start);
+ vaddr = l2_map_va(start, vaddr, flags);
+ xsc3_l2_clean_mva(vaddr);
start += CACHE_LINE_SIZE;
}
+ l2_map_restore_flags(flags);
+
dsb();
}
static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
{
+ unsigned long vaddr, flags;
+
if (start == 0 && end == -1ul) {
xsc3_l2_flush_all();
return;
}
+ vaddr = -1; /* to force the first mapping */
+ l2_map_save_flags(flags);
+
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
- xsc3_l2_clean_pa(start);
- xsc3_l2_inv_pa(start);
+ vaddr = l2_map_va(start, vaddr, flags);
+ xsc3_l2_clean_mva(vaddr);
+ xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
+ l2_map_restore_flags(flags);
+
dsb();
}
#include <linux/dma-mapping.h>
#include <asm/memory.h>
+#include <asm/highmem.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
}
EXPORT_SYMBOL(dma_cache_maint);
+static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
+ size_t size, int direction)
+{
+ void *vaddr;
+ unsigned long paddr;
+ void (*inner_op)(const void *, const void *);
+ void (*outer_op)(unsigned long, unsigned long);
+
+ switch (direction) {
+ case DMA_FROM_DEVICE: /* invalidate only */
+ inner_op = dmac_inv_range;
+ outer_op = outer_inv_range;
+ break;
+ case DMA_TO_DEVICE: /* writeback only */
+ inner_op = dmac_clean_range;
+ outer_op = outer_clean_range;
+ break;
+ case DMA_BIDIRECTIONAL: /* writeback and invalidate */
+ inner_op = dmac_flush_range;
+ outer_op = outer_flush_range;
+ break;
+ default:
+ BUG();
+ }
+
+ if (!PageHighMem(page)) {
+ vaddr = page_address(page) + offset;
+ inner_op(vaddr, vaddr + size);
+ } else {
+ vaddr = kmap_high_get(page);
+ if (vaddr) {
+ vaddr += offset;
+ inner_op(vaddr, vaddr + size);
+ kunmap_high(page);
+ }
+ }
+
+ paddr = page_to_phys(page) + offset;
+ outer_op(paddr, paddr + size);
+}
+
+void dma_cache_maint_page(struct page *page, unsigned long offset,
+ size_t size, int dir)
+{
+ /*
+ * A single sg entry may refer to multiple physically contiguous
+ * pages. But we still need to process highmem pages individually.
+ * If highmem is not configured then the bulk of this loop gets
+ * optimized out.
+ */
+ size_t left = size;
+ do {
+ size_t len = left;
+ if (PageHighMem(page) && len + offset > PAGE_SIZE) {
+ if (offset >= PAGE_SIZE) {
+ page += offset / PAGE_SIZE;
+ offset %= PAGE_SIZE;
+ }
+ len = PAGE_SIZE - offset;
+ }
+ dma_cache_maint_contiguous(page, offset, len, dir);
+ offset = 0;
+ page++;
+ left -= len;
+ } while (left);
+}
+EXPORT_SYMBOL(dma_cache_maint_page);
+
/**
* dma_map_sg - map a set of SG buffers for streaming mode DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
continue;
if (!arch_is_coherent())
- dma_cache_maint(sg_virt(s), s->length, dir);
+ dma_cache_maint_page(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_device);
struct address_space *mapping = page_mapping(page);
#ifndef CONFIG_SMP
- if (mapping && !mapping_mapped(mapping))
+ if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
set_bit(PG_dcache_dirty, &page->flags);
else
#endif
--- /dev/null
+/*
+ * arch/arm/mm/highmem.c -- ARM highmem support
+ *
+ * Author: Nicolas Pitre
+ * Created: september 8, 2008
+ * Copyright: Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include "mm.h"
+
+void *kmap(struct page *page)
+{
+ might_sleep();
+ if (!PageHighMem(page))
+ return page_address(page);
+ return kmap_high(page);
+}
+EXPORT_SYMBOL(kmap);
+
+void kunmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return;
+ kunmap_high(page);
+}
+EXPORT_SYMBOL(kunmap);
+
+void *kmap_atomic(struct page *page, enum km_type type)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ idx = type + KM_TYPE_NR * smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ /*
+ * With debugging enabled, kunmap_atomic forces that entry to 0.
+ * Make sure it was indeed properly unmapped.
+ */
+ BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+#endif
+ set_pte_ext(TOP_PTE(vaddr), mk_pte(page, kmap_prot), 0);
+ /*
+ * When debugging is off, kunmap_atomic leaves the previous mapping
+ * in place, so this TLB flush ensures the TLB is updated with the
+ * new mapping.
+ */
+ local_flush_tlb_kernel_page(vaddr);
+
+ return (void *)vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
+
+ if (kvaddr >= (void *)FIXADDR_START) {
+ __cpuc_flush_dcache_page((void *)vaddr);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+ set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
+ local_flush_tlb_kernel_page(vaddr);
+#else
+ (void) idx; /* to kill a warning */
+#endif
+ }
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
+
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ pagefault_disable();
+
+ idx = type + KM_TYPE_NR * smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+#endif
+ set_pte_ext(TOP_PTE(vaddr), pfn_pte(pfn, kmap_prot), 0);
+ local_flush_tlb_kernel_page(vaddr);
+
+ return (void *)vaddr;
+}
+
+struct page *kmap_atomic_to_page(const void *ptr)
+{
+ unsigned long vaddr = (unsigned long)ptr;
+ pte_t *pte;
+
+ if (vaddr < FIXADDR_START)
+ return virt_to_page(ptr);
+
+ pte = TOP_PTE(vaddr);
+ return pte_page(*pte);
+}
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/initrd.h>
+#include <linux/highmem.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
int i, node;
#ifndef CONFIG_DISCONTIGMEM
- max_mapnr = virt_to_page(high_memory) - mem_map;
+ max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
#endif
/* this will put all unused low memory onto the freelists */
__phys_to_pfn(__pa(swapper_pg_dir)), NULL);
#endif
+#ifdef CONFIG_HIGHMEM
+ /* set highmem page free */
+ for_each_online_node(node) {
+ for_each_nodebank (i, &meminfo, node) {
+ unsigned long start = bank_pfn_start(&meminfo.bank[i]);
+ unsigned long end = bank_pfn_end(&meminfo.bank[i]);
+ if (start >= max_low_pfn + PHYS_PFN_OFFSET)
+ totalhigh_pages += free_area(start, end, NULL);
+ }
+ }
+ totalram_pages += totalhigh_pages;
+#endif
+
/*
* Since our memory may not be contiguous, calculate the
* real number of pages we have in this system
initsize = __init_end - __init_begin;
printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
- "%dK data, %dK init)\n",
+ "%dK data, %dK init, %luK highmem)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
- codesize >> 10, datasize >> 10, initsize >> 10);
+ codesize >> 10, datasize >> 10, initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
extern int sysctl_overcommit_memory;
-/* the upper-most page table pointer */
-
#ifdef CONFIG_MMU
+/* the upper-most page table pointer */
extern pmd_t *top_pmd;
#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
#include <asm/cputype.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
+#include <asm/cachetype.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
+#include <asm/highmem.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_NONCACHED] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
}
+ /*
+ * Non-cacheable Normal - intended for memory areas that must
+ * not cause dirty cache line writebacks when used
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv6) {
+ if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+ /* Non-cacheable Normal is XCB = 001 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_BUFFERED;
+ } else {
+ /* For both ARMv6 and non-TEX-remapping ARMv7 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_TEX(1);
+ }
+ } else {
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
+ }
+
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
"ignoring high memory\n");
+ } else if (cache_is_vipt_aliasing()) {
+ printk(KERN_CRIT "HIGHMEM is not yet supported "
+ "with VIPT aliasing cache, "
+ "ignoring high memory\n");
} else {
memmove(bank + 1, bank,
(meminfo.nr_banks - i) * sizeof(*bank));
flush_cache_all();
}
+static void __init kmap_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+ pmd_t *pmd = pmd_off_k(PKMAP_BASE);
+ pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
+ BUG_ON(!pmd_none(*pmd) || !pte);
+ __pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
+ pkmap_page_table = pte + PTRS_PER_PTE;
+#endif
+}
+
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
prepare_page_table();
bootmem_init();
devicemaps_init(mdesc);
+ kmap_init();
top_pmd = pmd_off_k(0xffff0000);
--- /dev/null
+/*
+ * linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
+ *
+ * PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
+ *
+ * Heavily based on proc-arm926.S and proc-xsc3.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed. If the
+ * area is larger than this, then we flush the whole cache.
+ */
+#define CACHE_DLIMIT 32768
+
+/*
+ * The cache line size of the L1 D cache.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * cpu_mohawk_proc_init()
+ */
+ENTRY(cpu_mohawk_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_mohawk_proc_fin()
+ */
+ENTRY(cpu_mohawk_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl mohawk_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1800 @ ...iz...........
+ bic r0, r0, #0x0006 @ .............ca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_mohawk_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ *
+ * (same as arm926)
+ */
+ .align 5
+ENTRY(cpu_mohawk_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x0007 @ .............cam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_mohawk_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+ .align 5
+ENTRY(cpu_mohawk_do_idle)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular
+ * address space.
+ */
+ENTRY(mohawk_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(mohawk_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bgt __flush_whole_cache
+1: tst r2, #VM_EXEC
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(mohawk_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(mohawk_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_inv_range)
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_clean_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(mohawk_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+ mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(mohawk_cache_fns)
+ .long mohawk_flush_kern_cache_all
+ .long mohawk_flush_user_cache_all
+ .long mohawk_flush_user_cache_range
+ .long mohawk_coherent_kern_range
+ .long mohawk_coherent_user_range
+ .long mohawk_flush_kern_dcache_page
+ .long mohawk_dma_inv_range
+ .long mohawk_dma_clean_range
+ .long mohawk_dma_flush_range
+
+ENTRY(cpu_mohawk_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * cpu_mohawk_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_mohawk_switch_mm)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ orr r0, r0, #0x18 @ cache the page table in L2
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_mohawk_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_mohawk_set_pte_ext)
+ armv3_set_pte_ext
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __mohawk_setup, #function
+__mohawk_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs
+ orr r4, r4, #0x18 @ cache the page table in L2
+ mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
+
+ mov r0, #0 @ don't allow CP access
+ mcr p15, 0, r0, c15, c1, 0 @ write CP access register
+
+ adr r5, mohawk_crval
+ ldmia r5, {r5, r6}
+ mrc p15, 0, r0, c1, c0 @ get control register
+ bic r0, r0, r5
+ orr r0, r0, r6
+ mov pc, lr
+
+ .size __mohawk_setup, . - __mohawk_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 1001 ..00 0101
+ *
+ */
+ .type mohawk_crval, #object
+mohawk_crval:
+ crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type mohawk_processor_functions, #object
+mohawk_processor_functions:
+ .word v5t_early_abort
+ .word pabort_noifar
+ .word cpu_mohawk_proc_init
+ .word cpu_mohawk_proc_fin
+ .word cpu_mohawk_reset
+ .word cpu_mohawk_do_idle
+ .word cpu_mohawk_dcache_clean_area
+ .word cpu_mohawk_switch_mm
+ .word cpu_mohawk_set_pte_ext
+ .size mohawk_processor_functions, . - mohawk_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_mohawk_name, #object
+cpu_mohawk_name:
+ .asciz "Marvell 88SV331x"
+ .size cpu_mohawk_name, . - cpu_mohawk_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __88sv331x_proc_info,#object
+__88sv331x_proc_info:
+ .long 0x56158000 @ Marvell 88SV331x (MOHAWK)
+ .long 0xfffff000
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __mohawk_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_mohawk_name
+ .long mohawk_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long mohawk_cache_fns
+ .size __88sv331x_proc_info, . - __88sv331x_proc_info
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <asm/ptrace.h>
-
-#include "../kernel/stacktrace.h"
+#include <asm/stacktrace.h>
static int report_trace(struct stackframe *frame, void *d)
{
unsigned int *depth = d;
if (*depth) {
- oprofile_add_trace(frame->lr);
+ oprofile_add_trace(frame->pc);
(*depth)--;
}
struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
if (!user_mode(regs)) {
- unsigned long base = ((unsigned long)regs) & ~(THREAD_SIZE - 1);
- walk_stackframe(regs->ARM_fp, base, base + THREAD_SIZE,
- report_trace, &depth);
+ struct stackframe frame;
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ walk_stackframe(&frame, report_trace, &depth);
return;
}
menu "Freescale MXC Implementations"
choice
- prompt "MXC/iMX Base Type"
+ prompt "Freescale CPU family:"
default ARCH_MX3
config ARCH_MX1
config ARCH_MX2
bool "MX2-based"
select CPU_ARM926T
+ select COMMON_CLKDEV
help
This enables support for systems based on the Freescale i.MX2 family
config ARCH_MX3
bool "MX3-based"
select CPU_V6
+ select COMMON_CLKDEV
help
This enables support for systems based on the Freescale i.MX3 family
requirements for timing.
Say N here, unless you have a specialized requirement.
+config MXC_PWM
+ tristate "Enable PWM driver"
+ depends on ARCH_MXC
+ help
+ Enable support for the i.MX PWM controller(s).
+
endif
#
# Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o
+obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_MXC_PWM) += pwm.o
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
+/*
+ * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
+ * MXC architectures have switched to using clkdev.
+ */
+#ifndef CONFIG_COMMON_CLKDEV
/*
* Retrieve a clock by name.
*
return clk;
}
EXPORT_SYMBOL(clk_get);
+#endif
static void __clk_disable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_get_rate);
+#ifndef CONFIG_COMMON_CLKDEV
/* Decrement the clock's module reference count */
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
+#endif
/* Round the requested clock rate to the nearest supported
* rate that is less than or equal to the requested rate.
}
EXPORT_SYMBOL(clk_get_parent);
+#ifndef CONFIG_COMMON_CLKDEV
/*
* Add a new clock to the clock tree.
*/
}
late_initcall(mxc_setup_proc_entry);
+#endif /* CONFIG_PROC_FS */
+#endif
+
+/*
+ * Get the resulting clock rate from a PLL register value and the input
+ * frequency. PLLs with this register layout can at least be found on
+ * MX1, MX21, MX27 and MX31
+ *
+ * mfi + mfn / (mfd + 1)
+ * f = 2 * f_ref * --------------------
+ * pd + 1
+ */
+unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
+{
+ long long ll;
+ int mfn_abs;
+ unsigned int mfi, mfn, mfd, pd;
+
+ mfi = (reg_val >> 10) & 0xf;
+ mfn = reg_val & 0x3ff;
+ mfd = (reg_val >> 16) & 0x3ff;
+ pd = (reg_val >> 26) & 0xf;
+
+ mfi = mfi <= 5 ? 5 : mfi;
+
+ mfn_abs = mfn;
+
+#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
+ if (mfn >= 0x200) {
+ mfn |= 0xFFFFFE00;
+ mfn_abs = -mfn;
+ }
#endif
+
+ freq *= 2;
+ freq /= pd + 1;
+
+ ll = (unsigned long long)freq * mfn_abs;
+
+ do_div(ll, mfd + 1);
+ if (mfn < 0)
+ ll = -ll;
+ ll = (freq * mfi) + ll;
+
+ return ll;
+}
--- /dev/null
+
+#include <linux/module.h>
+
+unsigned int __mxc_cpu_type;
+EXPORT_SYMBOL(__mxc_cpu_type);
+
+void mxc_set_cpu_type(unsigned int type)
+{
+ __mxc_cpu_type = type;
+}
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <mach/common.h>
int __init mxc_register_device(struct platform_device *pdev, void *data)
{
void (*err_handler) (int, void *, int errcode);
void (*prog_handler) (int, void *, struct scatterlist *);
void *data;
- unsigned int dma_mode;
+ unsigned int dma_mode;
struct scatterlist *sg;
unsigned int resbytes;
int dma_num;
int ret = 0;
int i;
- dma_clk = clk_get(NULL, "dma_clk");
+ dma_clk = clk_get(NULL, "dma");
clk_enable(dma_clk);
/* reset DMA module */
static int mxc_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
- _set_gpio_direction(chip, offset, 1);
mxc_gpio_set(chip, offset, value);
+ _set_gpio_direction(chip, offset, 1);
return 0;
}
* Base address of PBC controller, CS4
*/
#define PBC_BASE_ADDRESS 0xEB000000
-#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset))
+#define PBC_REG_ADDR(offset) (void __force __iomem *) \
+ (PBC_BASE_ADDRESS + (offset))
/*
* PBC Interupt name definitions
#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+#include <mach/hardware.h>
+
/* Base address of PBC controller */
#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR)
/* Offsets for the PBC Controller register */
--- /dev/null
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31moboard_boards {
+ MX31NOBOARD = 0,
+ MX31DEVBOARD = 1,
+ MX31MARXBOT = 2,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31moboard_devboard_init(void);
+extern void mx31moboard_marxbot_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
--- /dev/null
+/*
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
+#define __ASM_ARCH_MXC_BOARD_QONG_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+/* NOR FLASH */
+#define QONG_NOR_SIZE (128*1024*1024)
+
+#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
--- /dev/null
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
struct module;
struct clk {
+#ifndef CONFIG_COMMON_CLKDEV
+ /* As soon as i.MX1 and i.MX31 switched to clkdev, this
+ * block can go away */
struct list_head node;
struct module *owner;
const char *name;
+#endif
int id;
/* Source clock this clk depends on */
struct clk *parent;
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);
+unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
#define __ASM_ARCH_MXC_COMMON_H__
struct platform_device;
+struct clk;
extern void mxc_map_io(void);
extern void mxc_init_irq(void);
-extern void mxc_timer_init(const char *clk_timer);
-extern int mxc_clocks_init(unsigned long fref);
+extern void mxc_timer_init(struct clk *timer_clk);
+extern int mx1_clocks_init(unsigned long fref);
+extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx27_clocks_init(unsigned long fref);
+extern int mx31_clocks_init(unsigned long fref);
+extern int mx35_clocks_init(void);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
+extern void mxc_set_cpu_type(unsigned int type);
#endif
#endif
#ifdef CONFIG_MACH_MX31_3DS
#include <mach/board-mx31pdk.h>
+#endif
+#ifdef CONFIG_MACH_QONG
+#include <mach/board-qong.h>
#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
#include <asm/sizes.h>
#ifdef CONFIG_ARCH_MX3
-# include <mach/mx31.h>
+#include <mach/mx3x.h>
+#include <mach/mx31.h>
+#include <mach/mx35.h>
#endif
#ifdef CONFIG_ARCH_MX2
+# include <mach/mx2x.h>
+# ifdef CONFIG_MACH_MX21
+# include <mach/mx21.h>
+# endif
# ifdef CONFIG_MACH_MX27
# include <mach/mx27.h>
# endif
u_char * fixed_screen_cpu;
dma_addr_t fixed_screen_dma;
+ int (*init)(struct platform_device*);
+ int (*exit)(struct platform_device*);
+
void (*lcd_power)(int);
void (*backlight_power)(int);
};
+++ /dev/null
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef _MXC_GPIO_MX1_MX2_H
-#define _MXC_GPIO_MX1_MX2_H
-
-#include <linux/io.h>
-
-/*
- * GPIO Module and I/O Multiplexer
- * x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x) (0x00 + ((x) << 8))
-#define MXC_OCR1(x) (0x04 + ((x) << 8))
-#define MXC_OCR2(x) (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x) (0x1c + ((x) << 8))
-#define MXC_GIUS(x) (0x20 + ((x) << 8))
-#define MXC_SSR(x) (0x24 + ((x) << 8))
-#define MXC_ICR1(x) (0x28 + ((x) << 8))
-#define MXC_ICR2(x) (0x2c + ((x) << 8))
-#define MXC_IMR(x) (0x30 + ((x) << 8))
-#define MXC_ISR(x) (0x34 + ((x) << 8))
-#define MXC_GPR(x) (0x38 + ((x) << 8))
-#define MXC_SWR(x) (0x3c + ((x) << 8))
-#define MXC_PUEN(x) (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX 3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX 5
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT (1 << 8)
-#define GPIO_IN (0 << 8)
-#define GPIO_PUEN (1 << 9)
-
-#define GPIO_PF (1 << 10)
-#define GPIO_AF (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-/*-------------------------------------------------------------------------*/
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#ifdef CONFIG_ARCH_MX1
-#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_IN | 1)
-#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
-#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
-#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
-#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
-#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
-#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
-#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
-#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
-#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
-#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
-#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
-#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
-#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
-#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
-#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
-#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
-#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
-#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
-#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
-#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
-#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
-#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
-#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
-#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
-#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
-#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
-#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
-#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
-#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
-#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
-#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
-#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
-#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
-#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
-#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
-#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
-#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
-#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
-#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
-#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31)
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
-#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
-#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
-#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
-#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
-#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
-#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
-#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
-#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
-#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
-#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
-#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
-#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
-#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
-#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
-#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
-#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
-#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
-#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
-#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
-#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
-#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
-#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
-#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
-#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
-#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
-#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
-#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
-#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11)
-#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
-#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
-#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
-#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13)
-#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
-#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
-#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
-#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
-#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
-#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
-#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
-#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19)
-#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
-#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
-#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
-#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21)
-#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC_B (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE_B (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
-#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26)
-#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
-#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
-#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31)
-#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
-#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6)
-#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
-#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
-#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
-#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
-#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
-#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16)
-#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17)
-#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18)
-#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19)
-#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20)
-#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21)
-#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22)
-#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23)
-#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24)
-#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25)
-#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26)
-#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27)
-#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28)
-#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29)
-#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30)
-#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31)
-#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
-#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
-#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
-#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
-#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
-#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
-#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
-#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
-#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
-#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
-#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
-#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
-#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
-#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
-#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
-#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
-#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
-#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
-#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
-#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
-#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
-#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
-#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
-#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
-#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30)
-#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31)
-#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
-#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
-#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
-#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
-#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
-#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4)
-#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
-#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7)
-#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
-#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9)
-#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
-#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11)
-#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
-#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13)
-#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
-#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15)
-#define PE16_AF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
-#define PE16_PF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
-#define PE18_PF_SDHC1_D0 (GPIO_PORTE | GPIO_PF | 18)
-#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18)
-#define PE19_PF_SDHC1_D1 (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SDHC1_D2 (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SDHC1_D3 (GPIO_PORTE | GPIO_PF | 21)
-#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
-#define PE22_PF_SDHC1_CMD (GPIO_PORTE | GPIO_PF | 22)
-#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
-#define PE22_PF_SDHC1_CLK (GPIO_PORTE | GPIO_PF | 23)
-#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
-#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
-#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
-#endif
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
-
-#endif /* _MXC_GPIO_MX1_MX2_H */
--- /dev/null
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX1_H
+#define _MXC_IOMUX_MX1_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/* FIXME: This list is not completed. The correct directions are
+* missing on some (many) pins
+*/
+
+
+/* Primary GPIO pin functions */
+
+#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31)
+
+
+#endif
--- /dev/null
+/*
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX21_H
+#define _MXC_IOMUX_MX21_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16)
+
+/* Alternate GPIO pin functions */
+
+#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30)
+
+/* AIN GPIO pin functions */
+
+#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+
+/* BIN GPIO pin functions */
+
+#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+
+/* CIN GPIO pin functions */
+
+#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+
+/* AOUT GPIO pin functions */
+
+#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+
+
+#endif
--- /dev/null
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX27_H
+#define _MXC_IOMUX_MX27_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25)
+#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27)
+#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23)
+
+/* Alternate GPIO pin functions */
+
+#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24)
+#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26)
+#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23)
+
+/* AIN GPIO pin functions */
+
+#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+
+/* BIN GPIO pin functions */
+
+#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+
+/* CIN GPIO pin functions */
+
+#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
+
+/* AOUT GPIO pin functions */
+
+#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+
+#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+
+
+#endif /* _MXC_GPIO_MX1_MX2_H */
--- /dev/null
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX2x_H
+#define _MXC_IOMUX_MX2x_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22)
+
+/* Alternate GPIO pin functions */
+
+#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+
+/* AIN GPIO pin functions */
+
+#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+
+/* BIN GPIO pin functions */
+
+#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+
+/* CIN GPIO pin functions */
+
+#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+
+/* AOUT GPIO pin functions */
+
+#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
+#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
+
+
+#endif
MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
MUX_TAMPER_DETECT_EN = 1 << 16,
MUX_PGP_USB_4WIRE = 1 << 17,
- MUX_PGB_USB_COMMON = 1 << 18,
+ MUX_PGP_USB_COMMON = 1 << 18,
MUX_SDHC_MEMSTICK1 = 1 << 19,
MUX_SDHC_MEMSTICK2 = 1 << 20,
MUX_PGP_SPLL_BYP = 1 << 21,
};
/*
- * This function enables/disables the general purpose function for a particular
- * signal.
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
*/
-void iomux_config_gpr(enum iomux_gp_func , bool);
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label);
/*
- * set the mode for a IOMUX pin.
+ * releases a single pin:
+ * - make it available for a future use by another driver
+ * - frees the GPIO if the pin was configured as GPIO
+ * - DOES NOT reconfigure the IOMUX in its reset state
*/
-int mxc_iomux_mode(unsigned int);
+void mxc_iomux_release_pin(const unsigned int pin);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
/*
* This function enables/disables the general purpose function for a particular
* signal.
*/
-void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
+void mxc_iomux_set_gpr(enum iomux_gp_func, bool en);
+
+/*
+ * This function only configures the iomux hardware.
+ * It is called by the setup functions and should not be called directly anymore.
+ * It is here visible for backward compatibility
+ */
+int mxc_iomux_mode(unsigned int pin_mode);
#define IOMUX_PADNUM_MASK 0x1ff
#define IOMUX_GPIONUM_SHIFT 9
(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
MXC_GPIO_IRQ_START)
+/*
+ * The number of gpio devices among the pads
+ */
+#define GPIO_PORT_MAX 3
+
/*
* This enumeration is constructed based on the Section
* "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327),
};
+#define PIN_MAX 327
+#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */
+
/*
* Convenience values for use with mxc_iomux_mode()
*
#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MOSI__SCL IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MISO__SDA IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD3__LD3 IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD4__LD4 IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD5__LD5 IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD6__LD6 IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD7__LD7 IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD8__LD8 IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD9__LD9 IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD10__LD10 IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD11__LD11 IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD12__LD12 IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD13__LD13 IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD14__LD14 IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD15__LD15 IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD16__LD16 IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD17__LD17 IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_VSYNC3__VSYNC3 IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_HSYNC__HSYNC IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_FPSHIFT__FPSHIFT IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DRDY0__DRDY0 IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_REV__D3_REV IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
--- /dev/null
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_H
+#define _MXC_IOMUX_H
+
+/*
+* GPIO Module and I/O Multiplexer
+* x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR)
+#define MXC_DDIR(x) (0x00 + ((x) << 8))
+#define MXC_OCR1(x) (0x04 + ((x) << 8))
+#define MXC_OCR2(x) (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x) (0x1c + ((x) << 8))
+#define MXC_GIUS(x) (0x20 + ((x) << 8))
+#define MXC_SSR(x) (0x24 + ((x) << 8))
+#define MXC_ICR1(x) (0x28 + ((x) << 8))
+#define MXC_ICR2(x) (0x2c + ((x) << 8))
+#define MXC_IMR(x) (0x30 + ((x) << 8))
+#define MXC_ISR(x) (0x34 + ((x) << 8))
+#define MXC_GPR(x) (0x38 + ((x) << 8))
+#define MXC_SWR(x) (0x3c + ((x) << 8))
+#define MXC_PUEN(x) (0x40 + ((x) << 8))
+
+#ifdef CONFIG_ARCH_MX1
+# define GPIO_PORT_MAX 3
+#endif
+#ifdef CONFIG_ARCH_MX2
+# define GPIO_PORT_MAX 5
+#endif
+
+#ifndef GPIO_PORT_MAX
+# error "GPIO config port count unknown!"
+#endif
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT (1 << 8)
+#define GPIO_IN (0 << 8)
+#define GPIO_PUEN (1 << 9)
+
+#define GPIO_PF (1 << 10)
+#define GPIO_AF (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
+
+
+#ifdef CONFIG_ARCH_MX1
+#include <mach/iomux-mx1.h>
+#endif
+#ifdef CONFIG_ARCH_MX2
+#include <mach/iomux-mx2x.h>
+#ifdef CONFIG_MACH_MX21
+#include <mach/iomux-mx21.h>
+#endif
+#ifdef CONFIG_MACH_MX27
+#include <mach/iomux-mx27.h>
+#endif
+#endif
+
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
+
+
+extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif
#if defined CONFIG_ARCH_MX1
#define PHYS_OFFSET UL(0x08000000)
#elif defined CONFIG_ARCH_MX2
+#ifdef CONFIG_MACH_MX21
+#define PHYS_OFFSET UL(0xC0000000)
+#endif
+#ifdef CONFIG_MACH_MX27
#define PHYS_OFFSET UL(0xA0000000)
+#endif
#elif defined CONFIG_ARCH_MX3
#define PHYS_OFFSET UL(0x80000000)
#endif
--- /dev/null
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
+ *
+ * This contains i.MX21-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX21_H__
+#define __ASM_ARCH_MXC_MX21_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR 0xC0000000
+#define CSD1_BASE_ADDR 0xC4000000
+
+#define CS0_BASE_ADDR 0xC8000000
+#define CS1_BASE_ADDR 0xCC000000
+#define CS2_BASE_ADDR 0xD0000000
+#define CS3_BASE_ADDR 0xD1000000
+#define CS4_BASE_ADDR 0xD2000000
+#define CS5_BASE_ADDR 0xDD000000
+#define PCMCIA_MEM_BASE_ADDR 0xD4000000
+
+/* NAND, SDRAM, WEIM etc controllers */
+#define X_MEMC_BASE_ADDR 0xDF000000
+#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
+#define X_MEMC_SIZE SZ_256K
+
+#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
+#define EIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
+#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
+#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+
+#define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */
+
+/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
+#define ARCH_NR_GPIOS (6*32 + 16)
+
+/* fixed interrupt numbers */
+#define MXC_INT_USBCTRL 58
+#define MXC_INT_USBCTRL 58
+#define MXC_INT_USBMNP 57
+#define MXC_INT_USBFUNC 56
+#define MXC_INT_USBHOST 55
+#define MXC_INT_USBDMA 54
+#define MXC_INT_USBWKUP 53
+#define MXC_INT_EMMADEC 50
+#define MXC_INT_EMMAENC 49
+#define MXC_INT_BMI 30
+#define MXC_INT_FIRI 9
+
+/* fixed DMA request numbers */
+#define DMA_REQ_BMI_RX 29
+#define DMA_REQ_BMI_TX 28
+#define DMA_REQ_FIRI_RX 4
+
+#endif /* __ASM_ARCH_MXC_MX21_H__ */
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
+ * This contains i.MX27-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
/* IRAM */
#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */
-/* Register offests */
-#define AIPI_BASE_ADDR 0x10000000
-#define AIPI_BASE_ADDR_VIRT 0xF4000000
-#define AIPI_SIZE SZ_1M
-
-#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000)
-
-#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000)
#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000)
#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000)
#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000)
#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000)
#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000)
#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000)
-
-#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000)
#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000)
-#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000)
-/* for mx27*/
#define OTG_BASE_ADDR USBOTG_BASE_ADDR
#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000)
-#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800)
#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000)
-
#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000)
#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000)
#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000)
#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000)
#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000)
-#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000)
-
-/* ROMP and AVIC */
+/* ROM patch */
#define ROMP_BASE_ADDR 0x10041000
-#define AVIC_BASE_ADDR 0x10040000
-
-#define SAHB1_BASE_ADDR 0x80000000
-#define SAHB1_BASE_ADDR_VIRT 0xF4100000
-#define SAHB1_SIZE SZ_1M
-
-#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000)
#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000)
-/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR 0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
-#define X_MEMC_SIZE SZ_1M
-
-#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
-
/* Memory regions and CS */
-#define SDRAM_BASE_ADDR 0xA0000000
-#define CSD1_BASE_ADDR 0xB0000000
+#define SDRAM_BASE_ADDR 0xA0000000
+#define CSD1_BASE_ADDR 0xB0000000
#define CS0_BASE_ADDR 0xC0000000
#define CS1_BASE_ADDR 0xC8000000
#define CS5_BASE_ADDR 0xD6000000
#define PCMCIA_MEM_BASE_ADDR 0xDC000000
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __iomem *) \
- (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
- AIPI_IO_ADDRESS(x) : \
- ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
- SAHB1_IO_ADDRESS(x) : \
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
- X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
-
-/* define the address mapping macros: in physical address order */
-#define AIPI_IO_ADDRESS(x) \
- (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x)
-
-#define SAHB1_IO_ADDRESS(x) \
- (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
+#define X_MEMC_BASE_ADDR 0xD8000000
+#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
+#define X_MEMC_SIZE SZ_1M
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR)
+#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
-/* fixed interrput numbers */
+/* fixed interrupt numbers */
#define MXC_INT_CCM 63
#define MXC_INT_IIM 62
-#define MXC_INT_LCDC 61
-#define MXC_INT_SLCDC 60
#define MXC_INT_SAHARA 59
#define MXC_INT_SCC_SCM 58
#define MXC_INT_SCC_SMN 57
#define MXC_INT_USB2 55
#define MXC_INT_USB1 54
#define MXC_INT_VPU 53
-#define MXC_INT_EMMAPP 52
-#define MXC_INT_EMMAPRP 51
#define MXC_INT_FEC 50
#define MXC_INT_UART5 49
#define MXC_INT_UART6 48
-#define MXC_INT_DMACH15 47
-#define MXC_INT_DMACH14 46
-#define MXC_INT_DMACH13 45
-#define MXC_INT_DMACH12 44
-#define MXC_INT_DMACH11 43
-#define MXC_INT_DMACH10 42
-#define MXC_INT_DMACH9 41
-#define MXC_INT_DMACH8 40
-#define MXC_INT_DMACH7 39
-#define MXC_INT_DMACH6 38
-#define MXC_INT_DMACH5 37
-#define MXC_INT_DMACH4 36
-#define MXC_INT_DMACH3 35
-#define MXC_INT_DMACH2 34
-#define MXC_INT_DMACH1 33
-#define MXC_INT_DMACH0 32
-#define MXC_INT_CSI 31
#define MXC_INT_ATA 30
-#define MXC_INT_NANDFC 29
-#define MXC_INT_PCMCIA 28
-#define MXC_INT_WDOG 27
-#define MXC_INT_GPT1 26
-#define MXC_INT_GPT2 25
-#define MXC_INT_GPT3 24
-#define MXC_INT_GPT INT_GPT1
-#define MXC_INT_PWM 23
-#define MXC_INT_RTC 22
-#define MXC_INT_KPP 21
-#define MXC_INT_UART1 20
-#define MXC_INT_UART2 19
-#define MXC_INT_UART3 18
-#define MXC_INT_UART4 17
-#define MXC_INT_CSPI1 16
-#define MXC_INT_CSPI2 15
-#define MXC_INT_SSI1 14
-#define MXC_INT_SSI2 13
-#define MXC_INT_I2C 12
-#define MXC_INT_SDHC1 11
-#define MXC_INT_SDHC2 10
#define MXC_INT_SDHC3 9
-#define MXC_INT_GPIO 8
#define MXC_INT_SDHC 7
-#define MXC_INT_CSPI3 6
#define MXC_INT_RTIC 5
#define MXC_INT_GPT4 4
#define MXC_INT_GPT5 3
#define DMA_REQ_UART6_TX 34
#define DMA_REQ_UART5_RX 33
#define DMA_REQ_UART5_TX 32
-#define DMA_REQ_CSI_RX 31
-#define DMA_REQ_CSI_STAT 30
#define DMA_REQ_ATA_RCV 29
#define DMA_REQ_ATA_TX 28
-#define DMA_REQ_UART1_TX 27
-#define DMA_REQ_UART1_RX 26
-#define DMA_REQ_UART2_TX 25
-#define DMA_REQ_UART2_RX 24
-#define DMA_REQ_UART3_TX 23
-#define DMA_REQ_UART3_RX 22
-#define DMA_REQ_UART4_TX 21
-#define DMA_REQ_UART4_RX 20
-#define DMA_REQ_CSPI1_TX 19
-#define DMA_REQ_CSPI1_RX 18
-#define DMA_REQ_CSPI2_TX 17
-#define DMA_REQ_CSPI2_RX 16
-#define DMA_REQ_SSI1_TX1 15
-#define DMA_REQ_SSI1_RX1 14
-#define DMA_REQ_SSI1_TX0 13
-#define DMA_REQ_SSI1_RX0 12
-#define DMA_REQ_SSI2_TX1 11
-#define DMA_REQ_SSI2_RX1 10
-#define DMA_REQ_SSI2_TX0 9
-#define DMA_REQ_SSI2_RX0 8
-#define DMA_REQ_SDHC1 7
-#define DMA_REQ_SDHC2 6
#define DMA_REQ_MSHC 4
-#define DMA_REQ_EXT 3
-#define DMA_REQ_CSPI3_TX 2
-#define DMA_REQ_CSPI3_RX 1
/* silicon revisions specific to i.MX27 */
#define CHIP_REV_1_0 0x00
extern int mx27_revision(void);
#endif
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x1C
-#define GPIO_GDIR 0x00
-#define GPIO_PSR 0x24
-#define GPIO_ICR1 0x28
-#define GPIO_ICR2 0x2C
-#define GPIO_IMR 0x30
-#define GPIO_ISR 0x34
-#define GPIO_INT_LOW_LEV 0x3
-#define GPIO_INT_HIGH_LEV 0x2
-#define GPIO_INT_RISE_EDGE 0x0
-#define GPIO_INT_FALL_EDGE 0x1
-#define GPIO_INT_NONE 0x4
-
/* Mandatory defines used globally */
-/* this is an i.MX27 CPU */
-#define cpu_is_mx27() (1)
-
/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
#define ARCH_NR_GPIOS (192 + 16)
--- /dev/null
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This contains hardware definitions that are common between i.MX21 and
+ * i.MX27.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX2x_H__
+#define __ASM_ARCH_MXC_MX2x_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* The following addresses are common between i.MX21 and i.MX27 */
+
+/* Register offests */
+#define AIPI_BASE_ADDR 0x10000000
+#define AIPI_BASE_ADDR_VIRT 0xF4000000
+#define AIPI_SIZE SZ_1M
+
+#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000)
+#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000)
+#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000)
+#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000)
+#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000)
+#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000)
+#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000)
+#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000)
+#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000)
+#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000)
+#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000)
+#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000)
+#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000)
+#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000)
+#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000)
+#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000)
+#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000)
+#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000)
+#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000)
+#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000)
+#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000)
+#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000)
+#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000)
+#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000)
+#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000)
+#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000)
+#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000)
+#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
+#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000)
+#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800)
+#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000)
+#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000)
+
+#define AVIC_BASE_ADDR 0x10040000
+
+#define SAHB1_BASE_ADDR 0x80000000
+#define SAHB1_BASE_ADDR_VIRT 0xF4100000
+#define SAHB1_SIZE SZ_1M
+
+#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000)
+
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x) \
+ (void __force __iomem *) \
+ (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
+ AIPI_IO_ADDRESS(x) : \
+ ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+ SAHB1_IO_ADDRESS(x) : \
+ ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+ X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
+
+/* define the address mapping macros: in physical address order */
+#define AIPI_IO_ADDRESS(x) \
+ (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x)
+
+#define SAHB1_IO_ADDRESS(x) \
+ (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x) \
+ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* fixed interrupt numbers */
+#define MXC_INT_LCDC 61
+#define MXC_INT_SLCDC 60
+#define MXC_INT_EMMAPP 52
+#define MXC_INT_EMMAPRP 51
+#define MXC_INT_DMACH15 47
+#define MXC_INT_DMACH14 46
+#define MXC_INT_DMACH13 45
+#define MXC_INT_DMACH12 44
+#define MXC_INT_DMACH11 43
+#define MXC_INT_DMACH10 42
+#define MXC_INT_DMACH9 41
+#define MXC_INT_DMACH8 40
+#define MXC_INT_DMACH7 39
+#define MXC_INT_DMACH6 38
+#define MXC_INT_DMACH5 37
+#define MXC_INT_DMACH4 36
+#define MXC_INT_DMACH3 35
+#define MXC_INT_DMACH2 34
+#define MXC_INT_DMACH1 33
+#define MXC_INT_DMACH0 32
+#define MXC_INT_CSI 31
+#define MXC_INT_NANDFC 29
+#define MXC_INT_PCMCIA 28
+#define MXC_INT_WDOG 27
+#define MXC_INT_GPT1 26
+#define MXC_INT_GPT2 25
+#define MXC_INT_GPT3 24
+#define MXC_INT_GPT INT_GPT1
+#define MXC_INT_PWM 23
+#define MXC_INT_RTC 22
+#define MXC_INT_KPP 21
+#define MXC_INT_UART1 20
+#define MXC_INT_UART2 19
+#define MXC_INT_UART3 18
+#define MXC_INT_UART4 17
+#define MXC_INT_CSPI1 16
+#define MXC_INT_CSPI2 15
+#define MXC_INT_SSI1 14
+#define MXC_INT_SSI2 13
+#define MXC_INT_I2C 12
+#define MXC_INT_SDHC1 11
+#define MXC_INT_SDHC2 10
+#define MXC_INT_GPIO 8
+#define MXC_INT_CSPI3 6
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x1C
+#define GPIO_GDIR 0x00
+#define GPIO_PSR 0x24
+#define GPIO_ICR1 0x28
+#define GPIO_ICR2 0x2C
+#define GPIO_IMR 0x30
+#define GPIO_ISR 0x34
+#define GPIO_INT_LOW_LEV 0x3
+#define GPIO_INT_HIGH_LEV 0x2
+#define GPIO_INT_RISE_EDGE 0x0
+#define GPIO_INT_FALL_EDGE 0x1
+#define GPIO_INT_NONE 0x4
+
+/* fixed DMA request numbers */
+#define DMA_REQ_CSI_RX 31
+#define DMA_REQ_CSI_STAT 30
+#define DMA_REQ_UART1_TX 27
+#define DMA_REQ_UART1_RX 26
+#define DMA_REQ_UART2_TX 25
+#define DMA_REQ_UART2_RX 24
+#define DMA_REQ_UART3_TX 23
+#define DMA_REQ_UART3_RX 22
+#define DMA_REQ_UART4_TX 21
+#define DMA_REQ_UART4_RX 20
+#define DMA_REQ_CSPI1_TX 19
+#define DMA_REQ_CSPI1_RX 18
+#define DMA_REQ_CSPI2_TX 17
+#define DMA_REQ_CSPI2_RX 16
+#define DMA_REQ_SSI1_TX1 15
+#define DMA_REQ_SSI1_RX1 14
+#define DMA_REQ_SSI1_TX0 13
+#define DMA_REQ_SSI1_RX0 12
+#define DMA_REQ_SSI2_TX1 11
+#define DMA_REQ_SSI2_RX1 10
+#define DMA_REQ_SSI2_TX0 9
+#define DMA_REQ_SSI2_RX0 8
+#define DMA_REQ_SDHC1 7
+#define DMA_REQ_SDHC2 6
+#define DMA_REQ_EXT 3
+#define DMA_REQ_CSPI3_TX 2
+#define DMA_REQ_CSPI3_RX 1
+
+#endif /* __ASM_ARCH_MXC_MX2x_H__ */
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/*
- * MX31 memory map:
- *
- * Virt Phys Size What
- * ---------------------------------------------------------------------------
- * F8000000 1FFC0000 16K IRAM
- * F9000000 30000000 256M L2CC
- * FC000000 43F00000 1M AIPS 1
- * FC100000 50000000 1M SPBA
- * FC200000 53F00000 1M AIPS 2
- * FC500000 60000000 128M ROMPATCH
- * FC400000 68000000 128M AVIC
- * 70000000 256M IPU (MAX M2)
- * 80000000 256M CSD0 SDRAM/DDR
- * 90000000 256M CSD1 SDRAM/DDR
- * A0000000 128M CS0 Flash
- * A8000000 128M CS1 Flash
- * B0000000 32M CS2
- * B2000000 32M CS3
- * F4000000 B4000000 32M CS4
- * B6000000 32M CS5
- * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers
- * C0000000 64M PCMCIA/CF
- */
-
-#define CS0_BASE_ADDR 0xA0000000
-#define CS1_BASE_ADDR 0xA8000000
-#define CS2_BASE_ADDR 0xB0000000
-#define CS3_BASE_ADDR 0xB2000000
-
-#define CS4_BASE_ADDR 0xB4000000
-#define CS4_BASE_ADDR_VIRT 0xF4000000
-#define CS4_SIZE SZ_32M
-
-#define CS5_BASE_ADDR 0xB6000000
-#define PCMCIA_MEM_BASE_ADDR 0xBC000000
-
/*
* IRAM
*/
-#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
-#define IRAM_BASE_ADDR_VIRT 0xF8000000
-#define IRAM_SIZE SZ_16K
-
-/*
- * L2CC
- */
-#define L2CC_BASE_ADDR 0x30000000
-#define L2CC_BASE_ADDR_VIRT 0xF9000000
-#define L2CC_SIZE SZ_1M
-
-/*
- * AIPS 1
- */
-#define AIPS1_BASE_ADDR 0x43F00000
-#define AIPS1_BASE_ADDR_VIRT 0xFC000000
-#define AIPS1_SIZE SZ_1M
+#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
+#define MX31_IRAM_SIZE SZ_16K
-#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000)
#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000)
#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000)
-#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000)
#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
-#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
-
-/*
- * SPBA global module enabled #0
- */
-#define SPBA0_BASE_ADDR 0x50000000
-#define SPBA0_BASE_ADDR_VIRT 0xFC100000
-#define SPBA0_SIZE SZ_1M
#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000)
#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000)
-#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
-#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000)
-/*
- * AIPS 2
- */
-#define AIPS2_BASE_ADDR 0x53F00000
-#define AIPS2_BASE_ADDR_VIRT 0xFC200000
-#define AIPS2_SIZE SZ_1M
-#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000)
#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000)
-#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000)
#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000)
#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000)
-#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000)
#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000)
-#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000)
-
-/*
- * ROMP and AVIC
- */
-#define ROMP_BASE_ADDR 0x60000000
-#define ROMP_BASE_ADDR_VIRT 0xFC500000
-#define ROMP_SIZE SZ_1M
-
-#define AVIC_BASE_ADDR 0x68000000
-#define AVIC_BASE_ADDR_VIRT 0xFC400000
-#define AVIC_SIZE SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR 0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT 0xFC320000
-#define X_MEMC_SIZE SZ_64K
-#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
-#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR
+#define MX31_NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE_ADDR 0x70000000
-#define CSD0_BASE_ADDR 0x80000000
-#define CSD1_BASE_ADDR 0x90000000
-#define CS0_BASE_ADDR 0xA0000000
-#define CS1_BASE_ADDR 0xA8000000
-#define CS2_BASE_ADDR 0xB0000000
-#define CS3_BASE_ADDR 0xB2000000
-
-#define CS4_BASE_ADDR 0xB4000000
-#define CS4_BASE_ADDR_VIRT 0xF4000000
-#define CS4_SIZE SZ_32M
-
-#define CS5_BASE_ADDR 0xB6000000
-#define PCMCIA_MEM_BASE_ADDR 0xBC000000
-
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __iomem *) \
- (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
- ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
- ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
- ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
- ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
- ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
- ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
- ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
- 0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-
-#define IRAM_IO_ADDRESS(x) \
- (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
-
-#define L2CC_IO_ADDRESS(x) \
- (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x) \
- (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x) \
- (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x) \
- (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x) \
- (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x) \
- (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/*
- * Interrupt numbers
- */
-#define MXC_INT_PEN_ADS7843 0
-#define MXC_INT_RESV1 1
-#define MXC_INT_CS8900A 2
-#define MXC_INT_I2C3 3
-#define MXC_INT_I2C2 4
#define MXC_INT_MPEG4_ENCODER 5
-#define MXC_INT_RTIC 6
#define MXC_INT_FIRI 7
-#define MXC_INT_MMC_SDHC2 8
+#define MX31_INT_MMC_SDHC2 8
#define MXC_INT_MMC_SDHC1 9
-#define MXC_INT_I2C 10
-#define MXC_INT_SSI2 11
-#define MXC_INT_SSI1 12
-#define MXC_INT_CSPI2 13
-#define MXC_INT_CSPI1 14
-#define MXC_INT_ATA 15
+#define MX31_INT_SSI2 11
+#define MX31_INT_SSI1 12
#define MXC_INT_MBX 16
#define MXC_INT_CSPI3 17
-#define MXC_INT_UART3 18
-#define MXC_INT_IIM 19
#define MXC_INT_SIM2 20
#define MXC_INT_SIM1 21
-#define MXC_INT_RNGA 22
-#define MXC_INT_EVTMON 23
-#define MXC_INT_KPP 24
-#define MXC_INT_RTC 25
-#define MXC_INT_PWM 26
-#define MXC_INT_EPIT2 27
-#define MXC_INT_EPIT1 28
-#define MXC_INT_GPT 29
-#define MXC_INT_RESV30 30
-#define MXC_INT_RESV31 31
-#define MXC_INT_UART2 32
-#define MXC_INT_NANDFC 33
-#define MXC_INT_SDMA 34
+#define MXC_INT_CCM_DVFS 31
#define MXC_INT_USB1 35
#define MXC_INT_USB2 36
#define MXC_INT_USB3 37
#define MXC_INT_USB4 38
-#define MXC_INT_MSHC1 39
#define MXC_INT_MSHC2 40
-#define MXC_INT_IPU_ERR 41
-#define MXC_INT_IPU_SYN 42
-#define MXC_INT_RESV43 43
-#define MXC_INT_RESV44 44
-#define MXC_INT_UART1 45
#define MXC_INT_UART4 46
#define MXC_INT_UART5 47
-#define MXC_INT_ECT 48
-#define MXC_INT_SCC_SCM 49
-#define MXC_INT_SCC_SMN 50
-#define MXC_INT_GPIO2 51
-#define MXC_INT_GPIO1 52
#define MXC_INT_CCM 53
#define MXC_INT_PCMCIA 54
-#define MXC_INT_WDOG 55
-#define MXC_INT_GPIO3 56
-#define MXC_INT_RESV57 57
-#define MXC_INT_EXT_POWER 58
-#define MXC_INT_EXT_TEMPER 59
-#define MXC_INT_EXT_SENSOR60 60
-#define MXC_INT_EXT_SENSOR61 61
-#define MXC_INT_EXT_WDOG 62
-#define MXC_INT_EXT_TV 63
-
-#define PROD_SIGNATURE 0x1 /* For MX31 */
-
-/* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0 0x10
-#define CHIP_REV_1_1 0x11
-#define CHIP_REV_1_2 0x12
-#define CHIP_REV_1_3 0x13
-#define CHIP_REV_2_0 0x20
-#define CHIP_REV_2_1 0x21
-#define CHIP_REV_2_2 0x22
-#define CHIP_REV_2_3 0x23
-#define CHIP_REV_3_0 0x30
-#define CHIP_REV_3_1 0x31
-#define CHIP_REV_3_2 0x32
-
-#define SYSTEM_REV_MIN CHIP_REV_1_0
-#define SYSTEM_REV_NUM 3
-
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x00
-#define GPIO_GDIR 0x04
-#define GPIO_PSR 0x08
-#define GPIO_ICR1 0x0C
-#define GPIO_ICR2 0x10
-#define GPIO_IMR 0x14
-#define GPIO_ISR 0x18
-#define GPIO_INT_LOW_LEV 0x0
-#define GPIO_INT_HIGH_LEV 0x1
-#define GPIO_INT_RISE_EDGE 0x2
-#define GPIO_INT_FALL_EDGE 0x3
-#define GPIO_INT_NONE 0x4
-
-/* Mandatory defines used globally */
-
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS 96
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-/* this is a i.MX31 CPU */
-#define cpu_is_mx31() (1)
-
-extern unsigned int system_rev;
-
-static inline int mx31_revision(void)
-{
- return system_rev;
-}
-#endif
-#endif /* __ASM_ARCH_MXC_MX31_H__ */
--- /dev/null
+/*
+ * IRAM
+ */
+#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
+#define MX35_IRAM_SIZE SZ_128K
+
+#define MXC_FEC_BASE_ADDR 0x50038000
+#define MX35_NFC_BASE_ADDR 0xBB000000
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_OWIRE 2
+#define MX35_INT_MMC_SDHC1 7
+#define MXC_INT_MMC_SDHC2 8
+#define MXC_INT_MMC_SDHC3 9
+#define MX35_INT_SSI1 11
+#define MX35_INT_SSI2 12
+#define MXC_INT_GPU2D 16
+#define MXC_INT_ASRC 17
+#define MXC_INT_USBHS 35
+#define MXC_INT_USBOTG 37
+#define MXC_INT_ESAI 40
+#define MXC_INT_CAN1 43
+#define MXC_INT_CAN2 44
+#define MXC_INT_MLB 46
+#define MXC_INT_SPDIF 47
+#define MXC_INT_FEC 57
+
#include <linux/fb.h>
/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH 0x80000000
-#define FB_SYNC_CLK_INVERT 0x40000000
-#define FB_SYNC_DATA_INVERT 0x20000000
-#define FB_SYNC_CLK_IDLE_EN 0x10000000
-#define FB_SYNC_SHARP_MODE 0x08000000
-#define FB_SYNC_SWAP_RGB 0x04000000
-#define FB_SYNC_CLK_SEL_EN 0x02000000
+#define FB_SYNC_OE_ACT_HIGH 0x80000000
+#define FB_SYNC_CLK_INVERT 0x40000000
+#define FB_SYNC_DATA_INVERT 0x20000000
+#define FB_SYNC_CLK_IDLE_EN 0x10000000
+#define FB_SYNC_SHARP_MODE 0x08000000
+#define FB_SYNC_SWAP_RGB 0x04000000
+#define FB_SYNC_CLK_SEL_EN 0x02000000
/**
* struct mx3fb_platform_data - mx3fb platform data
*
- * @dma_dev: pointer to the dma-device, used for dma-slave connection
- * @mode: pointer to a platform-provided per mxc_register_fb() videomode
+ * @dma_dev: pointer to the dma-device, used for dma-slave connection
+ * @mode: pointer to a platform-provided per mxc_register_fb() videomode
*/
struct mx3fb_platform_data {
- struct device *dma_dev;
- const char *name;
- const struct fb_videomode *mode;
- int num_modes;
+ struct device *dma_dev;
+ const char *name;
+ const struct fb_videomode *mode;
+ int num_modes;
};
#endif
--- /dev/null
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*
+ * MX31 memory map:
+ *
+ * Virt Phys Size What
+ * ---------------------------------------------------------------------------
+ * FC000000 43F00000 1M AIPS 1
+ * FC100000 50000000 1M SPBA
+ * FC200000 53F00000 1M AIPS 2
+ * FC500000 60000000 128M ROMPATCH
+ * FC400000 68000000 128M AVIC
+ * 70000000 256M IPU (MAX M2)
+ * 80000000 256M CSD0 SDRAM/DDR
+ * 90000000 256M CSD1 SDRAM/DDR
+ * A0000000 128M CS0 Flash
+ * A8000000 128M CS1 Flash
+ * B0000000 32M CS2
+ * B2000000 32M CS3
+ * F4000000 B4000000 32M CS4
+ * B6000000 32M CS5
+ * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers
+ * C0000000 64M PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR 0xA0000000
+#define CS1_BASE_ADDR 0xA8000000
+#define CS2_BASE_ADDR 0xB0000000
+#define CS3_BASE_ADDR 0xB2000000
+
+#define CS4_BASE_ADDR 0xB4000000
+#define CS4_BASE_ADDR_VIRT 0xF4000000
+#define CS4_SIZE SZ_32M
+
+#define CS5_BASE_ADDR 0xB6000000
+#define PCMCIA_MEM_BASE_ADDR 0xBC000000
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR 0x30000000
+#define L2CC_SIZE SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR 0x43F00000
+#define AIPS1_BASE_ADDR_VIRT 0xFC000000
+#define AIPS1_SIZE SZ_1M
+
+#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000)
+#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000)
+#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 0x50000000
+#define SPBA0_BASE_ADDR_VIRT 0xFC100000
+#define SPBA0_SIZE SZ_1M
+
+#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
+#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR 0x53F00000
+#define AIPS2_BASE_ADDR_VIRT 0xFC200000
+#define AIPS2_SIZE SZ_1M
+#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
+#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000)
+#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000)
+#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR 0x60000000
+#define ROMP_BASE_ADDR_VIRT 0xFC500000
+#define ROMP_SIZE SZ_1M
+
+#define AVIC_BASE_ADDR 0x68000000
+#define AVIC_BASE_ADDR_VIRT 0xFC400000
+#define AVIC_SIZE SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR 0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT 0xFC320000
+#define X_MEMC_SIZE SZ_64K
+
+#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR 0x70000000
+#define CSD0_BASE_ADDR 0x80000000
+#define CSD1_BASE_ADDR 0x90000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x) \
+ (void __force __iomem *) \
+ (((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+ ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+ ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+ ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+ ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+ ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+ ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+ 0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define L2CC_IO_ADDRESS(x) \
+ (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x) \
+ (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x) \
+ (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x) \
+ (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x) \
+ (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x) \
+ (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x) \
+ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_I2C3 3
+#define MXC_INT_I2C2 4
+#define MXC_INT_RTIC 6
+#define MXC_INT_I2C 10
+#define MXC_INT_CSPI2 13
+#define MXC_INT_CSPI1 14
+#define MXC_INT_ATA 15
+#define MXC_INT_UART3 18
+#define MXC_INT_IIM 19
+#define MXC_INT_RNGA 22
+#define MXC_INT_EVTMON 23
+#define MXC_INT_KPP 24
+#define MXC_INT_RTC 25
+#define MXC_INT_PWM 26
+#define MXC_INT_EPIT2 27
+#define MXC_INT_EPIT1 28
+#define MXC_INT_GPT 29
+#define MXC_INT_POWER_FAIL 30
+#define MXC_INT_UART2 32
+#define MXC_INT_NANDFC 33
+#define MXC_INT_SDMA 34
+#define MXC_INT_MSHC1 39
+#define MXC_INT_IPU_ERR 41
+#define MXC_INT_IPU_SYN 42
+#define MXC_INT_UART1 45
+#define MXC_INT_ECT 48
+#define MXC_INT_SCC_SCM 49
+#define MXC_INT_SCC_SMN 50
+#define MXC_INT_GPIO2 51
+#define MXC_INT_GPIO1 52
+#define MXC_INT_WDOG 55
+#define MXC_INT_GPIO3 56
+#define MXC_INT_EXT_POWER 58
+#define MXC_INT_EXT_TEMPER 59
+#define MXC_INT_EXT_SENSOR60 60
+#define MXC_INT_EXT_SENSOR61 61
+#define MXC_INT_EXT_WDOG 62
+#define MXC_INT_EXT_TV 63
+
+#define PROD_SIGNATURE 0x1 /* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0 0x10
+#define CHIP_REV_1_1 0x11
+#define CHIP_REV_1_2 0x12
+#define CHIP_REV_1_3 0x13
+#define CHIP_REV_2_0 0x20
+#define CHIP_REV_2_1 0x21
+#define CHIP_REV_2_2 0x22
+#define CHIP_REV_2_3 0x23
+#define CHIP_REV_3_0 0x30
+#define CHIP_REV_3_1 0x31
+#define CHIP_REV_3_2 0x32
+
+#define SYSTEM_REV_MIN CHIP_REV_1_0
+#define SYSTEM_REV_NUM 3
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x00
+#define GPIO_GDIR 0x04
+#define GPIO_PSR 0x08
+#define GPIO_ICR1 0x0C
+#define GPIO_ICR2 0x10
+#define GPIO_IMR 0x14
+#define GPIO_ISR 0x18
+#define GPIO_INT_LOW_LEV 0x0
+#define GPIO_INT_HIGH_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_FALL_EDGE 0x3
+#define GPIO_INT_NONE 0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS 96
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+ return system_rev;
+}
+#endif
+
+#endif /* __ASM_ARCH_MXC_MX31_H__ */
+
#error "Do not include directly."
#endif
-/* clean up all things that are not used */
-#ifndef CONFIG_ARCH_MX3
-# define cpu_is_mx31() (0)
+#define MXC_CPU_MX1 1
+#define MXC_CPU_MX21 21
+#define MXC_CPU_MX27 27
+#define MXC_CPU_MX31 31
+#define MXC_CPU_MX35 35
+
+#ifndef __ASSEMBLY__
+extern unsigned int __mxc_cpu_type;
+#endif
+
+#ifdef CONFIG_ARCH_MX1
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX1
+# endif
+# define cpu_is_mx1() (mxc_cpu_type == MXC_CPU_MX1)
+#else
+# define cpu_is_mx1() (0)
+#endif
+
+#ifdef CONFIG_MACH_MX21
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX21
+# endif
+# define cpu_is_mx21() (mxc_cpu_type == MXC_CPU_MX21)
+#else
+# define cpu_is_mx21() (0)
#endif
-#ifndef CONFIG_MACH_MX27
-# define cpu_is_mx27() (0)
+#ifdef CONFIG_MACH_MX27
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX27
+# endif
+# define cpu_is_mx27() (mxc_cpu_type == MXC_CPU_MX27)
+#else
+# define cpu_is_mx27() (0)
+#endif
+
+#ifdef CONFIG_ARCH_MX31
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX31
+# endif
+# define cpu_is_mx31() (mxc_cpu_type == MXC_CPU_MX31)
+#else
+# define cpu_is_mx31() (0)
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX35
+# endif
+# define cpu_is_mx35() (mxc_cpu_type == MXC_CPU_MX35)
+#else
+# define cpu_is_mx35() (0)
#endif
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
#endif
+#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
+
#endif /* __ASM_ARCH_MXC_H__ */
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
void mxc_gpio_mode(int gpio_mode)
{
--- /dev/null
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
+#define PWM_VER_1
+
+#define PWMCR 0x00 /* PWM Control Register */
+#define PWMSR 0x04 /* PWM Sample Register */
+#define PWMPR 0x08 /* PWM Period Register */
+#define PWMCNR 0x0C /* PWM Counter Register */
+
+#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */
+#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */
+#define PWMCR_SWR (1 << 16) /* Software Reset */
+#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */
+#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */
+#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */
+#define PWMCR_IRQ (1 << 7) /* Interrupt Request */
+#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */
+#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */
+#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */
+#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
+#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */
+
+#define MAX_DIV (128 * 16)
+#endif
+
+#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
+#define PWM_VER_2
+
+#define PWMCR 0x00 /* PWM Control Register */
+#define PWMSR 0x04 /* PWM Status Register */
+#define PWMIR 0x08 /* PWM Interrupt Register */
+#define PWMSAR 0x0C /* PWM Sample Register */
+#define PWMPR 0x10 /* PWM Period Register */
+#define PWMCNR 0x14 /* PWM Counter Register */
+
+#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */
+#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */
+#define PWMCR_SWR (1 << 3) /* Software Reset */
+#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */
+#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16)
+#define PWMCR_CLKSRC_OFF (0 << 16)
+#define PWMCR_CLKSRC_IPG (1 << 16)
+#define PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define PWMCR_CLKSRC_CLK32 (3 << 16)
+#define PWMCR_POUTC
+#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */
+#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */
+#define PWMCR_DBGEN (1 << 22) /* Debug Mode */
+#define PWMCR_WAITEN (1 << 23) /* Wait Mode */
+#define PWMCR_DOZEN (1 << 24) /* Doze Mode */
+#define PWMCR_STOPEN (1 << 25) /* Stop Mode */
+#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */
+
+#define MAX_DIV 4096
+#endif
+
+#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
+#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
+#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+ struct clk *clk;
+
+ int clk_enabled;
+ void __iomem *mmio_base;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles, prescale;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ prescale = period_cycles / 0x10000 + 1;
+
+ period_cycles /= prescale;
+ c = (unsigned long long)period_cycles * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+#ifdef PWM_VER_2
+ writel(duty_cycles, pwm->mmio_base + PWMSAR);
+ writel(period_cycles, pwm->mmio_base + PWMPR);
+ writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
+ pwm->mmio_base + PWMCR);
+#elif defined PWM_VER_1
+#error PWM not yet working on MX1 / MX21
+#endif
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ int rc = 0;
+
+ if (!pwm->clk_enabled) {
+ rc = clk_enable(pwm->clk);
+ if (!rc)
+ pwm->clk_enabled = 1;
+ }
+ return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ if (pwm->clk_enabled) {
+ clk_disable(pwm->clk);
+ pwm->clk_enabled = 0;
+ }
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else
+ pwm = ERR_PTR(-EBUSY);
+ } else
+ pwm = ERR_PTR(-ENOENT);
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else
+ pr_warning("PWM device already freed\n");
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static int __devinit mxc_pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+ int ret = 0;
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ pwm->clk = clk_get(&pdev->dev, "pwm");
+
+ if (IS_ERR(pwm->clk)) {
+ ret = PTR_ERR(pwm->clk);
+ goto err_free;
+ }
+
+ pwm->clk_enabled = 0;
+
+ pwm->use_count = 0;
+ pwm->pwm_id = pdev->id;
+ pwm->pdev = pdev;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free_clk;
+ }
+
+ r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free_clk;
+ }
+
+ pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+ if (pwm->mmio_base == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+
+ platform_set_drvdata(pdev, pwm);
+ return 0;
+
+err_free_mem:
+ release_mem_region(r->start, r->end - r->start + 1);
+err_free_clk:
+ clk_put(pwm->clk);
+err_free:
+ kfree(pwm);
+ return ret;
+}
+
+static int __devexit mxc_pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+
+ pwm = platform_get_drvdata(pdev);
+ if (pwm == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+ list_del(&pwm->node);
+ mutex_unlock(&pwm_lock);
+
+ iounmap(pwm->mmio_base);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, r->end - r->start + 1);
+
+ clk_put(pwm->clk);
+
+ kfree(pwm);
+ return 0;
+}
+
+static struct platform_driver mxc_pwm_driver = {
+ .driver = {
+ .name = "mxc_pwm",
+ },
+ .probe = mxc_pwm_probe,
+ .remove = __devexit_p(mxc_pwm_remove),
+};
+
+static int __init mxc_pwm_init(void)
+{
+ return platform_driver_register(&mxc_pwm_driver);
+}
+arch_initcall(mxc_pwm_init);
+
+static void __exit mxc_pwm_exit(void)
+{
+ platform_driver_unregister(&mxc_pwm_driver);
+}
+module_exit(mxc_pwm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-/* clock source for the timer */
-static struct clk *timer_clk;
-
/* clock source */
static cycle_t mxc_get_cycles(void)
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static int __init mxc_clocksource_init(void)
+static int __init mxc_clocksource_init(struct clk *timer_clk)
{
- unsigned int clock;
-
- clock = clk_get_rate(timer_clk);
+ unsigned int c = clk_get_rate(timer_clk);
- clocksource_mxc.mult = clocksource_hz2mult(clock,
+ clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
.rating = 200,
};
-static int __init mxc_clockevent_init(void)
+static int __init mxc_clockevent_init(struct clk *timer_clk)
{
- unsigned int clock;
-
- clock = clk_get_rate(timer_clk);
+ unsigned int c = clk_get_rate(timer_clk);
- clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+ clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
return 0;
}
-void __init mxc_timer_init(const char *clk_timer)
+void __init mxc_timer_init(struct clk *timer_clk)
{
- timer_clk = clk_get(NULL, clk_timer);
- if (!timer_clk) {
- printk(KERN_ERR"Cannot determine timer clock. Giving up.\n");
- return;
- }
-
clk_enable(timer_clk);
/*
TIMER_BASE + MXC_TCTL);
/* init and register the timer to the framework */
- mxc_clocksource_init();
- mxc_clockevent_init();
+ mxc_clocksource_init(timer_clk);
+ mxc_clockevent_init(timer_clk);
/* Make irqs happen */
setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
}
-
config ARCH_OMAP1
bool "TI OMAP1"
+ select COMMON_CLKDEV
config ARCH_OMAP2
bool "TI OMAP2"
select CPU_V6
+ select COMMON_CLKDEV
config ARCH_OMAP3
bool "TI OMAP3"
select CPU_V7
+ select COMMON_CLKDEV
endchoice
Say Y here if you want support for the OMAP Multichannel
Buffered Serial Port.
+config OMAP_MBOX_FWK
+ tristate "Mailbox framework support"
+ depends on ARCH_OMAP
+ default n
+ help
+ Say Y here if you want to use OMAP Mailbox framework support for
+ DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+
choice
prompt "System timer"
default OMAP_MPU_TIMER
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk * clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
int clk_enable(struct clk *clk)
{
unsigned long flags;
}
EXPORT_SYMBOL(clk_disable);
-int clk_get_usecount(struct clk *clk)
-{
- unsigned long flags;
- int ret = 0;
-
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = clk->usecount;
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_get_usecount);
-
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long flags;
}
EXPORT_SYMBOL(clk_get_rate);
-void clk_put(struct clk *clk)
-{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
/*-------------------------------------------------------------------------
* Optional clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_set_rate)
ret = arch_clock->clk_set_rate(clk, rate);
+ if (ret == 0) {
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
+ propagate_rate(clk);
+ }
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_set_parent)
- ret = arch_clock->clk_set_parent(clk, parent);
+ if (clk->usecount == 0) {
+ if (arch_clock->clk_set_parent)
+ ret = arch_clock->clk_set_parent(clk, parent);
+ if (ret == 0) {
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
+ propagate_rate(clk);
+ }
+ } else
+ ret = -EBUSY;
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
struct clk *clk_get_parent(struct clk *clk)
{
- unsigned long flags;
- struct clk * ret = NULL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_get_parent)
- ret = arch_clock->clk_get_parent(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
+ return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
__setup("mpurate=", omap_clk_setup);
/* Used for clocks that always have same value as the parent clock */
-void followparent_recalc(struct clk *clk)
+unsigned long followparent_recalc(struct clk *clk)
{
- if (clk == NULL || IS_ERR(clk))
- return;
+ return clk->parent->rate;
+}
- clk->rate = clk->parent->rate;
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
}
/* Propagate rate to children */
{
struct clk *clkp;
- if (tclk == NULL || IS_ERR(tclk))
- return;
-
- list_for_each_entry(clkp, &clocks, node) {
- if (likely(clkp->parent != tclk))
- continue;
- if (likely((u32)clkp->recalc))
- clkp->recalc(clkp);
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
}
}
+static LIST_HEAD(root_clks);
+
/**
* recalculate_root_clocks - recalculate and propagate all root clocks
*
{
struct clk *clkp;
- list_for_each_entry(clkp, &clocks, node) {
- if (unlikely(!clkp->parent) && likely((u32)clkp->recalc))
- clkp->recalc(clkp);
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
}
}
+void clk_init_one(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
int clk_register(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
list_add(&clk->node, &clocks);
if (clk->init)
clk->init(clk);
return;
mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
list_del(&clk->node);
mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
-void clk_deny_idle(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_deny_idle)
- arch_clock->clk_deny_idle(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_deny_idle);
-
-void clk_allow_idle(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_allow_idle)
- arch_clock->clk_allow_idle(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_allow_idle);
-
void clk_enable_init_clocks(void)
{
struct clk *clkp;
}
EXPORT_SYMBOL(clk_enable_init_clocks);
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
+};
+
#ifdef CONFIG_CPU_FREQ
void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
list_for_each_entry(ck, &clocks, node) {
- if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
- ck->enable_reg == 0)
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || ck->enable_reg == 0)
continue;
spin_lock_irqsave(&clockfw_lock, flags);
static void __init __omap2_set_globals(void)
{
omap2_set_globals_tap(omap2_globals);
- omap2_set_globals_memory(omap2_globals);
+ omap2_set_globals_sdrc(omap2_globals);
omap2_set_globals_control(omap2_globals);
omap2_set_globals_prcm(omap2_globals);
}
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/clock.h>
#include <asm/system.h>
#define VERY_HI_RATE 900000000
+static struct cpufreq_frequency_table *freq_table;
+
#ifdef CONFIG_ARCH_OMAP1
#define MPU_CLK "mpu"
#else
int omap_verify_speed(struct cpufreq_policy *policy)
{
+ if (freq_table)
+ return cpufreq_frequency_table_verify(policy, freq_table);
+
if (policy->cpu)
return -EINVAL;
struct cpufreq_freqs freqs;
int ret = 0;
+ /* Ensure desired rate is within allowed range. Some govenors
+ * (ondemand) will just pass target_freq=0 to get the minimum. */
+ if (target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+ if (target_freq > policy->cpuinfo.max_freq)
+ target_freq = policy->cpuinfo.max_freq;
+
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
freqs.cpu = 0;
+ if (freqs.old == freqs.new)
+ return ret;
+
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- ret = clk_set_rate(mpu_clk, target_freq * 1000);
+#ifdef CONFIG_CPU_FREQ_DEBUG
+ printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n",
+ freqs.old, freqs.new);
+#endif
+ ret = clk_set_rate(mpu_clk, freqs.new * 1000);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return ret;
static int __init omap_cpu_init(struct cpufreq_policy *policy)
{
+ int result = 0;
+
mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
if (policy->cpu != 0)
return -EINVAL;
+
policy->cur = policy->min = policy->max = omap_getspeed(0);
- policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
- policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+ clk_init_cpufreq_table(&freq_table);
+ if (freq_table) {
+ result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (!result)
+ cpufreq_frequency_table_get_attr(freq_table,
+ policy->cpu);
+ } else {
+ policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
+ policy->cpuinfo.max_freq = clk_round_rate(mpu_clk,
+ VERY_HI_RATE) / 1000;
+ }
+
+ /* FIXME: what's the actual transition time? */
+ policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
return 0;
}
return 0;
}
+static struct freq_attr *omap_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_STICKY,
.verify = omap_verify_speed,
.init = omap_cpu_init,
.exit = omap_cpu_exit,
.name = "omap",
+ .attr = omap_cpufreq_attr,
};
static int __init omap_cpufreq_init(void)
}
arch_initcall(omap_cpufreq_init);
+
+/*
+ * if ever we want to remove this, upon cleanup call:
+ *
+ * cpufreq_unregister_driver()
+ * cpufreq_frequency_table_put_attr()
+ */
+
ret = platform_device_add(pdev);
if (ret)
goto fail;
+
+ /* return device handle to board setup code */
+ data->dev = &pdev->dev;
return 0;
fail:
static int dma_lch_count;
static int dma_chan_count;
+static int omap_dma_reserve_channels;
static spinlock_t dma_chan_lock;
static struct omap_dma_lch *dma_chan;
* id.
*/
dma_write(dev_id | (1 << 10), CCR(free_ch));
- } else if (cpu_is_omap730() || cpu_is_omap15xx()) {
+ } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
dma_write(dev_id, CCR(free_ch));
}
/* STATUS register count is from 1-32 while our is 0-31 */
static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
{
- u32 val;
+ u32 val, enable_reg;
int i;
val = dma_read(IRQSTATUS_L0);
printk(KERN_WARNING "Spurious DMA IRQ\n");
return IRQ_HANDLED;
}
+ enable_reg = dma_read(IRQENABLE_L0);
+ val &= enable_reg; /* Dispatch only relevant interrupts */
for (i = 0; i < dma_lch_count && val != 0; i++) {
if (val & 1)
omap2_dma_handle_ch(i);
return -ENODEV;
}
+ if (cpu_class_is_omap2() && omap_dma_reserve_channels
+ && (omap_dma_reserve_channels <= dma_lch_count))
+ dma_lch_count = omap_dma_reserve_channels;
+
dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
GFP_KERNEL);
if (!dma_chan)
printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
dma_chan_count = 9;
enable_1510_mode = 1;
- } else if (cpu_is_omap16xx() || cpu_is_omap730()) {
+ } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
printk(KERN_INFO "OMAP DMA hardware version %d\n",
dma_read(HW_ID));
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
u8 revision = dma_read(REVISION) & 0xff;
printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
revision >> 4, revision & 0xf);
- dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ dma_chan_count = dma_lch_count;
} else {
dma_chan_count = 0;
return 0;
arch_initcall(omap_init_dma);
+/*
+ * Reserve the omap SDMA channels using cmdline bootarg
+ * "omap_dma_reserve_ch=". The valid range is 1 to 32
+ */
+static int __init omap_dma_cmdline_reserve_ch(char *str)
+{
+ if (get_option(&str, &omap_dma_reserve_channels) != 1)
+ omap_dma_reserve_channels = 0;
+ return 1;
+}
+
+__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
+
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/dmtimer.h>
#include <mach/irqs.h>
return timer;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request);
struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
return timer;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
void omap_dm_timer_free(struct omap_dm_timer *timer)
{
WARN_ON(!timer->reserved);
timer->reserved = 0;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_free);
void omap_dm_timer_enable(struct omap_dm_timer *timer)
{
timer->enabled = 1;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
void omap_dm_timer_disable(struct omap_dm_timer *timer)
{
timer->enabled = 0;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
{
return timer->irq;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
#if defined(CONFIG_ARCH_OMAP1)
return inputmask;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
{
return timer->fclk;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
return 0;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
#endif
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
void omap_dm_timer_start(struct omap_dm_timer *timer)
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_start);
void omap_dm_timer_stop(struct omap_dm_timer *timer)
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
#ifdef CONFIG_ARCH_OMAP1
l |= source << n;
omap_writel(l, MOD_CONF_CTRL_1);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#else
* cause an abort. */
__delay(150000);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#endif
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
/* Optimized set_load which removes costly spin wait in timer_start */
void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
unsigned int match)
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
int toggle, int trigger)
l |= trigger << 10;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
{
}
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
unsigned int value)
omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
{
return l;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
return l;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
int omap_dm_timers_active(void)
{
}
return 0;
}
+EXPORT_SYMBOL_GPL(omap_dm_timers_active);
int __init omap_dm_timer_init(void)
{
#define OMAP730_GPIO_INT_MASK 0x10
#define OMAP730_GPIO_INT_STATUS 0x14
+/*
+ * OMAP850 specific GPIO registers
+ */
+#define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO_DATA_INPUT 0x00
+#define OMAP850_GPIO_DATA_OUTPUT 0x04
+#define OMAP850_GPIO_DIR_CONTROL 0x08
+#define OMAP850_GPIO_INT_CONTROL 0x0c
+#define OMAP850_GPIO_INT_MASK 0x10
+#define OMAP850_GPIO_INT_STATUS 0x14
+
/*
* omap24xx specific GPIO registers
*/
#define METHOD_GPIO_1510 1
#define METHOD_GPIO_1610 2
#define METHOD_GPIO_730 3
-#define METHOD_GPIO_24XX 4
+#define METHOD_GPIO_850 4
+#define METHOD_GPIO_24XX 5
#ifdef CONFIG_ARCH_OMAP16XX
static struct gpio_bank gpio_bank_1610[5] = {
};
#endif
+#ifdef CONFIG_ARCH_OMAP850
+static struct gpio_bank gpio_bank_850[7] = {
+ { OMAP_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+ { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
+ { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
+ { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
+ { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 },
+ { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 },
+ { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+};
+#endif
+
+
#ifdef CONFIG_ARCH_OMAP24XX
static struct gpio_bank gpio_bank_242x[4] = {
return &gpio_bank[0];
return &gpio_bank[1 + (gpio >> 4)];
}
- if (cpu_is_omap730()) {
+ if (cpu_is_omap7xx()) {
if (OMAP_GPIO_IS_MPUIO(gpio))
return &gpio_bank[0];
return &gpio_bank[1 + (gpio >> 5)];
static inline int get_gpio_index(int gpio)
{
- if (cpu_is_omap730())
+ if (cpu_is_omap7xx())
return gpio & 0x1f;
if (cpu_is_omap24xx())
return gpio & 0x1f;
return 0;
if ((cpu_is_omap16xx()) && gpio < 64)
return 0;
- if (cpu_is_omap730() && gpio < 192)
+ if (cpu_is_omap7xx() && gpio < 192)
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
reg += OMAP730_GPIO_DIR_CONTROL;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DIR_CONTROL;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
l &= ~(1 << gpio);
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DATA_OUTPUT;
+ l = __raw_readl(reg);
+ if (enable)
+ l |= 1 << gpio;
+ else
+ l &= ~(1 << gpio);
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP730_GPIO_DATA_INPUT;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DATA_INPUT;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
goto bad;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_INT_CONTROL;
+ l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_RISING)
+ l |= 1 << gpio;
+ else if (trigger & IRQ_TYPE_EDGE_FALLING)
+ l &= ~(1 << gpio);
+ else
+ goto bad;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
reg += OMAP730_GPIO_INT_STATUS;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_INT_STATUS;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
inv = 1;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_INT_MASK;
+ mask = 0xffffffff;
+ inv = 1;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
l |= gpio_mask;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_INT_MASK;
+ l = __raw_readl(reg);
+ if (enable)
+ l &= ~(gpio_mask);
+ else
+ l |= gpio_mask;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
if (bank->method == METHOD_GPIO_730)
isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ if (bank->method == METHOD_GPIO_850)
+ isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
gpio_bank = gpio_bank_730;
}
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ if (cpu_is_omap850()) {
+ printk(KERN_INFO "OMAP850 GPIO hardware\n");
+ gpio_bank_count = 7;
+ gpio_bank = gpio_bank_850;
+ }
+#endif
#ifdef CONFIG_ARCH_OMAP24XX
if (cpu_is_omap242x()) {
__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
}
- if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) {
+ if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DIR_CONTROL;
break;
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DIR_CONTROL;
+ break;
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
if (bank_is_mpuio(bank))
gpio = OMAP_MPUIO(0);
- else if (cpu_class_is_omap2() || cpu_is_omap730())
+ else if (cpu_class_is_omap2() || cpu_is_omap730() ||
+ cpu_is_omap850())
bankwidth = 32;
for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
static const int omap34xx_pins[][2] = {};
#endif
+#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
+
static void __init omap_i2c_mux_pins(int bus)
{
int scl, sda;
omap_cfg_reg(scl);
}
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len)
+static int __init omap_i2c_nr_ports(void)
{
- int ports, err;
- struct platform_device *pdev;
- struct resource *res;
- resource_size_t base, irq;
+ int ports = 0;
if (cpu_class_is_omap1())
ports = 1;
else if (cpu_is_omap34xx())
ports = 3;
- BUG_ON(bus_id < 1 || bus_id > ports);
+ return ports;
+}
- if (info) {
- err = i2c_register_board_info(bus_id, info, len);
- if (err)
- return err;
- }
+static int __init omap_i2c_add_bus(int bus_id)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+ resource_size_t base, irq;
pdev = &omap_i2c_devices[bus_id - 1];
- *(u32 *)pdev->dev.platform_data = clkrate;
-
if (bus_id == 1) {
res = pdev->resource;
if (cpu_class_is_omap1()) {
omap_i2c_mux_pins(bus_id - 1);
return platform_device_register(pdev);
}
+
+/**
+ * omap_i2c_bus_setup - Process command line options for the I2C bus speed
+ * @str: String of options
+ *
+ * This function allow to override the default I2C bus speed for given I2C
+ * bus with a command line option.
+ *
+ * Format: i2c_bus=bus_id,clkrate (in kHz)
+ *
+ * Returns 1 on success, 0 otherwise.
+ */
+static int __init omap_i2c_bus_setup(char *str)
+{
+ int ports;
+ int ints[3];
+
+ ports = omap_i2c_nr_ports();
+ get_options(str, 3, ints);
+ if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+ return 0;
+ i2c_rate[ints[1] - 1] = ints[2];
+ i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
+
+ return 1;
+}
+__setup("i2c_bus=", omap_i2c_bus_setup);
+
+/*
+ * Register busses defined in command line but that are not registered with
+ * omap_register_i2c_bus from board initialization code.
+ */
+static int __init omap_register_i2c_bus_cmdline(void)
+{
+ int i, err = 0;
+
+ for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
+ if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
+ i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
+ err = omap_i2c_add_bus(i + 1);
+ if (err)
+ goto out;
+ }
+
+out:
+ return err;
+}
+subsys_initcall(omap_register_i2c_bus_cmdline);
+
+/**
+ * omap_register_i2c_bus - register I2C bus with device descriptors
+ * @bus_id: bus id counting from number 1
+ * @clkrate: clock rate of the bus in kHz
+ * @info: pointer into I2C device descriptor table or NULL
+ * @len: number of descriptors in the table
+ *
+ * Returns 0 on success or an error code.
+ */
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ int err;
+
+ BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+
+ if (info) {
+ err = i2c_register_board_info(bus_id, info, len);
+ if (err)
+ return err;
+ }
+
+ if (!i2c_rate[bus_id - 1])
+ i2c_rate[bus_id - 1] = clkrate;
+ i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
+
+ return omap_i2c_add_bus(bus_id);
+}
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-2430sdp.h
- *
- * Hardware definitions for TI OMAP2430 SDP board.
- *
- * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_2430SDP_H
-#define __ASM_ARCH_OMAP_2430SDP_H
-
-/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
-#define OMAP24XX_ETHR_GPIO_IRQ 149
-#define SDP2430_CS0_BASE 0x04000000
-
-/* Function prototypes */
-extern void sdp2430_flash_init(void);
-extern void sdp2430_usb_init(void);
-
-#endif /* __ASM_ARCH_OMAP_2430SDP_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-apollon.h
- *
- * Hardware definitions for Samsung OMAP24XX Apollon board.
- *
- * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_APOLLON_H
-#define __ASM_ARCH_OMAP_APOLLON_H
-
-#include <mach/cpu.h>
-
-extern void apollon_mmc_init(void);
-
-static inline int apollon_plus(void)
-{
- /* The apollon plus has IDCODE revision 5 */
- return omap_rev() & 0xc0;
-}
-
-/* Placeholder for APOLLON specific defines */
-#define APOLLON_ETHR_GPIO_IRQ 74
-
-#endif /* __ASM_ARCH_OMAP_APOLLON_H */
-
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <mach/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE 0xE8100000
-#define FSAMPLE_CPLD_SIZE SZ_4K
-#define FSAMPLE_CPLD_START 0x05080000
-
-#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET 0
-#define FSAMPLE_CPLD_BIT_LCD_RESET 1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
-#define FSAMPLE_CPLD_BIT_OTG_RESET 9
-
-#define fsample_cpld_set(bit) \
- fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
- fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-h4.h
- *
- * Hardware definitions for TI OMAP2420 H4 board.
- *
- * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H4_H
-#define __ASM_ARCH_OMAP_H4_H
-
-/* MMC Prototypes */
-extern void h4_mmc_init(void);
-
-/* Placeholder for H4 specific defines */
-#define OMAP24XX_ETHR_GPIO_IRQ 92
-#endif /* __ASM_ARCH_OMAP_H4_H */
-
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-innovator.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
-#define __ASM_ARCH_OMAP_INNOVATOR_H
-
-#if defined (CONFIG_ARCH_OMAP15XX)
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE D256M_1X16_4B
-#endif
-
-#define OMAP1510P1_IMIF_PRI_VALUE 0x00
-#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
-#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
-
-#ifndef __ASSEMBLY__
-void fpga_write(unsigned char val, int reg);
-unsigned char fpga_read(int reg);
-#endif
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined (CONFIG_ARCH_OMAP16XX)
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START 0x04000300
-
-#endif /* CONFIG_ARCH_OMAP1610 */
-#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-ldp.h
- *
- * Hardware definitions for TI OMAP3 LDP.
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_LDP_H
-#define __ASM_ARCH_OMAP_LDP_H
-
-extern void twl4030_bci_battery_init(void);
-
-#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
-#define LDP_SMC911X_CS 1
-#define LDP_SMC911X_GPIO 152
-#define DEBUG_BASE 0x08000000
-#define OMAP34XX_ETHR_START DEBUG_BASE
-#endif /* __ASM_ARCH_OMAP_LDP_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-nokia.h
- *
- * Information structures for Nokia-specific board config data
- *
- * Copyright (C) 2005 Nokia Corporation
- */
-
-#ifndef _OMAP_BOARD_NOKIA_H
-#define _OMAP_BOARD_NOKIA_H
-
-#include <linux/types.h>
-
-#define OMAP_TAG_NOKIA_BT 0x4e01
-#define OMAP_TAG_WLAN_CX3110X 0x4e02
-#define OMAP_TAG_CBUS 0x4e03
-#define OMAP_TAG_EM_ASIC_BB5 0x4e04
-
-
-#define BT_CHIP_CSR 1
-#define BT_CHIP_TI 2
-
-#define BT_SYSCLK_12 1
-#define BT_SYSCLK_38_4 2
-
-struct omap_bluetooth_config {
- u8 chip_type;
- u8 bt_wakeup_gpio;
- u8 host_wakeup_gpio;
- u8 reset_gpio;
- u8 bt_uart;
- u8 bd_addr[6];
- u8 bt_sysclk;
-};
-
-struct omap_wlan_cx3110x_config {
- u8 chip_type;
- s16 power_gpio;
- s16 irq_gpio;
- s16 spi_cs_gpio;
-};
-
-struct omap_cbus_config {
- s16 clk_gpio;
- s16 dat_gpio;
- s16 sel_gpio;
-};
-
-struct omap_em_asic_bb5_config {
- s16 retu_irq_gpio;
- s16 tahvo_irq_gpio;
-};
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-omap3beagle.h
- *
- * Hardware definitions for TI OMAP3 BEAGLE.
- *
- * Initial creation by Syed Mohammed Khasim <khasim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP3_BEAGLE_H
-#define __ASM_ARCH_OMAP3_BEAGLE_H
-
-#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */
-
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-osk.h
- *
- * Hardware definitions for TI OMAP5912 OSK board.
- *
- * Written by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_OSK_H
-#define __ASM_ARCH_OMAP_OSK_H
-
-/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
-#define OMAP_OSK_ETHR_START 0x04800300
-
-/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
- * alternate pin configurations for hardware-controlled blinking.
- */
-#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
-# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
-# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
-# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
-# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
-# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
-
-#endif /* __ASM_ARCH_OMAP_OSK_H */
-
+++ /dev/null
-/*
- * board-overo.h (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OVERO_H
-#define __ASM_ARCH_OVERO_H
-
-#define OVERO_GPIO_BT_XGATE 15
-#define OVERO_GPIO_W2W_NRESET 16
-#define OVERO_GPIO_BT_NRESET 164
-#define OVERO_GPIO_USBH_CPEN 168
-#define OVERO_GPIO_USBH_NRESET 183
-
-#endif /* ____ASM_ARCH_OVERO_H */
-
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten E device.
- *
- * Maintainters : http://palmtelinux.sf.net
- * palmtelinux-developpers@lists.sf.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTE_H
-#define __OMAP_BOARD_PALMTE_H
-
-#define PALMTE_USBDETECT_GPIO 0
-#define PALMTE_USB_OR_DC_GPIO 1
-#define PALMTE_TSC_GPIO 4
-#define PALMTE_PINTDAV_GPIO 6
-#define PALMTE_MMC_WP_GPIO 8
-#define PALMTE_MMC_POWER_GPIO 9
-#define PALMTE_HDQ_GPIO 11
-#define PALMTE_HEADPHONES_GPIO 14
-#define PALMTE_SPEAKER_GPIO 15
-#define PALMTE_DC_GPIO OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
-
-#endif /* __OMAP_BOARD_PALMTE_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten|T device.
- *
- * Maintainters : Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTT_H
-#define __OMAP_BOARD_PALMTT_H
-
-#define PALMTT_USBDETECT_GPIO 0
-#define PALMTT_CABLE_GPIO 1
-#define PALMTT_LED_GPIO 3
-#define PALMTT_PENIRQ_GPIO 6
-#define PALMTT_MMC_WP_GPIO 8
-#define PALMTT_HDQ_GPIO 11
-
-#endif /* __OMAP_BOARD_PALMTT_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-palmz71.h
- *
- * Hardware definitions for the Palm Zire71 device.
- *
- * Maintainters : Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMZ71_H
-#define __OMAP_BOARD_PALMZ71_H
-
-#define PALMZ71_USBDETECT_GPIO 0
-#define PALMZ71_PENIRQ_GPIO 6
-#define PALMZ71_MMC_WP_GPIO 8
-#define PALMZ71_HDQ_GPIO 11
-
-#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
-
-#endif /* __OMAP_BOARD_PALMZ71_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/board-perseus2.h
- *
- * Copyright 2003 by Texas Instruments Incorporated
- * OMAP730 / Perseus2 support by Jean Pihet
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
-#define __ASM_ARCH_OMAP_PERSEUS2_H
-
-#include <mach/fpga.h>
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE D256M_1X16_4B
-#endif
-
-#endif
extern void voiceblue_wdt_enable(void);
extern void voiceblue_wdt_disable(void);
extern void voiceblue_wdt_ping(void);
-extern void voiceblue_reset(void);
#endif /* __ASM_ARCH_VOICEBLUE_H */
/* Different peripheral ids */
#define OMAP_TAG_CLOCK 0x4f01
#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB 0x4f04
#define OMAP_TAG_LCD 0x4f05
#define OMAP_TAG_GPIO_SWITCH 0x4f06
#define OMAP_TAG_UART 0x4f07
char version[12];
};
-
-#include <mach/board-nokia.h>
-
struct omap_board_config_entry {
u16 tag;
u16 len;
--- /dev/null
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
struct clk;
struct clockdomain;
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+};
+
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
struct clksel_rate {
- u8 div;
u32 val;
+ u8 div;
u8 flags;
};
void __iomem *mult_div1_reg;
u32 mult_mask;
u32 div1_mask;
+ struct clk *clk_bypass;
+ struct clk *clk_ref;
+ void __iomem *control_reg;
+ u32 enable_mask;
+ unsigned int rate_tolerance;
+ unsigned long last_rounded_rate;
u16 last_rounded_m;
u8 last_rounded_n;
- unsigned long last_rounded_rate;
- unsigned int rate_tolerance;
- u16 max_multiplier;
+ u8 min_divider;
u8 max_divider;
u32 max_tolerance;
+ u16 max_multiplier;
# if defined(CONFIG_ARCH_OMAP3)
u8 modes;
- void __iomem *control_reg;
- u32 enable_mask;
+ void __iomem *autoidle_reg;
+ void __iomem *idlest_reg;
+ u32 autoidle_mask;
+ u32 freqsel_mask;
+ u32 idlest_mask;
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
- void __iomem *autoidle_reg;
- u32 autoidle_mask;
- void __iomem *idlest_reg;
- u8 idlest_bit;
# endif
};
struct clk {
struct list_head node;
- struct module *owner;
+ const struct clkops *ops;
const char *name;
int id;
struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
unsigned long rate;
__u32 flags;
void __iomem *enable_reg;
- __u8 enable_bit;
- __s8 usecount;
- void (*recalc)(struct clk *);
+ unsigned long (*recalc)(struct clk *);
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*init)(struct clk *);
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
+ __u8 enable_bit;
+ __s8 usecount;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
u8 fixed_div;
void __iomem *clksel_reg;
long (*clk_round_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_parent)(struct clk *clk, struct clk *parent);
- struct clk * (*clk_get_parent)(struct clk *clk);
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
extern unsigned int mpurate;
-extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_init_one(struct clk *clk);
extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
extern void propagate_rate(struct clk *clk);
extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk * clk);
-extern void clk_allow_idle(struct clk *clk);
-extern void clk_deny_idle(struct clk *clk);
-extern int clk_get_usecount(struct clk *clk);
+extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
+#ifdef CONFIG_CPU_FREQ
+extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+#endif
+
+extern const struct clkops clkops_null;
/* Clock flags */
-#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */
+/* bit 0 is free */
#define RATE_FIXED (1 << 1) /* Fixed clock rate */
-#define RATE_PROPAGATES (1 << 2) /* Program children too */
-#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */
-#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */
+/* bits 2-4 are free */
#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */
-#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */
#define CLOCK_IDLE_CONTROL (1 << 7)
#define CLOCK_NO_IDLE_PARENT (1 << 8)
#define DELAYED_APP (1 << 9) /* Delay application of clock */
#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */
#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */
#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */
-/* bits 13-20 are currently free */
-#define CLOCK_IN_OMAP310 (1 << 21)
-#define CLOCK_IN_OMAP730 (1 << 22)
-#define CLOCK_IN_OMAP1510 (1 << 23)
-#define CLOCK_IN_OMAP16XX (1 << 24)
-#define CLOCK_IN_OMAP242X (1 << 25)
-#define CLOCK_IN_OMAP243X (1 << 26)
-#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */
-#define PARENT_CONTROLS_CLOCK (1 << 28)
-#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */
-#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */
+/* bits 13-31 are currently free */
/* Clksel_rate flags */
#define DEFAULT_RATE (1 << 0)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K 0
-#define CORE_CLK_SRC_DPLL 1
-#define CORE_CLK_SRC_DPLL_X2 2
-
#endif
/*
- * linux/include/asm-arm/arch-omap/clockdomain.h
+ * arch/arm/plat-omap/include/mach/clockdomain.h
*
* OMAP2/3 clockdomain framework functions
*
*/
struct clkdm_pwrdm_autodep {
- /* Name of the powerdomain to add a wkdep/sleepdep on */
- const char *pwrdm_name;
+ union {
+ /* Name of the powerdomain to add a wkdep/sleepdep on */
+ const char *name;
- /* Powerdomain pointer (looked up at clkdm_init() time) */
- struct powerdomain *pwrdm;
+ /* Powerdomain pointer (looked up at clkdm_init() time) */
+ struct powerdomain *ptr;
+ } pwrdm;
/* OMAP chip types that this clockdomain dep is valid on */
const struct omap_chip_id omap_chip;
/* Clockdomain name */
const char *name;
- /* Powerdomain enclosing this clockdomain */
- const char *pwrdm_name;
+ union {
+ /* Powerdomain enclosing this clockdomain */
+ const char *name;
+
+ /* Powerdomain pointer assigned at clkdm_register() */
+ struct powerdomain *ptr;
+ } pwrdm;
/* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
const u16 clktrctrl_mask;
/* Usecount tracking */
atomic_t usecount;
- /* Powerdomain pointer assigned at clkdm_register() */
- struct powerdomain *pwrdm;
-
struct list_head node;
};
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
# define OMAP_NAME omap730
# endif
#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap850
+# endif
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
- * cpu_is_omap7xx(): True for OMAP730
+ * cpu_is_omap7xx(): True for OMAP730, OMAP850
* cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
* cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
* cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() is_omap15xx()
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() 1
* These are only rarely needed.
* cpu_is_omap330(): True for OMAP330
* cpu_is_omap730(): True for OMAP730
+ * cpu_is_omap850(): True for OMAP850
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1611(): True for OMAP1611
IS_OMAP_TYPE(310, 0x0310)
IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(850, 0x0850)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1611, 0x1611)
#define cpu_is_omap310() 0
#define cpu_is_omap730() 0
+#define cpu_is_omap850() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap5912() 0
# undef cpu_is_omap730
# define cpu_is_omap730() is_omap730()
# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap850
+# define cpu_is_omap850() is_omap850()
+# endif
#else
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap730
# define cpu_is_omap730() 1
# endif
#endif
+#else
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap850
+# define cpu_is_omap850() 1
+# endif
+#endif
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
#endif
/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \
+#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
* use omap_chip_is().
*
*/
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
+#define CHIP_IS_OMAP2420 (1 << 0)
+#define CHIP_IS_OMAP2430 (1 << 1)
+#define CHIP_IS_OMAP3430 (1 << 2)
+#define CHIP_IS_OMAP3430ES1 (1 << 3)
+#define CHIP_IS_OMAP3430ES2 (1 << 4)
+#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
+#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
+
+#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+/*
+ * "GE" here represents "greater than or equal to" in terms of ES
+ * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
+ * chips at ES2 and beyond, but not, for example, any OMAP lines after
+ * OMAP3.
+ */
+#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
+ CHIP_IS_OMAP3430ES3_0 | \
+ CHIP_IS_OMAP3430ES3_1)
+#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1)
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
int omap_chip_is(struct omap_chip_id oci);
int omap_type(void);
void omap2_check_revision(void);
#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif
#define OMAP_MPUIO_BASE 0xfffb5000
-#ifdef CONFIG_ARCH_OMAP730
+#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
+
#define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT 0x02
#define OMAP_MPUIO_IO_CNTL 0x04
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
-extern void gpmc_init(void);
+extern void __init gpmc_init(void);
#endif
#include "omap24xx.h"
#include "omap34xx.h"
-#ifndef __ASSEMBLER__
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#include "board-innovator.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H2
-#include "board-h2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#include "board-perseus2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_FSAMPLE
-#include "board-fsample.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H3
-#include "board-h3.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_2430SDP
-#include "board-2430sdp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP3_BEAGLE
-#include "board-omap3beagle.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_LDP
-#include "board-ldp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_APOLLON
-#include "board-apollon.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_OSK
-#include "board-osk.h"
-#endif
-
-#ifdef CONFIG_MACH_VOICEBLUE
-#include "board-voiceblue.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-#include "board-palmte.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMZ71
-#include "board-palmz71.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTT
-#include "board-palmtt.h"
-#endif
-
-#ifdef CONFIG_MACH_SX1
-#include "board-sx1.h"
-#endif
-
-#endif /* !__ASSEMBLER__ */
-
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a))
#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a))
+struct omap_sdrc_params;
+
extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t)
#define __arch_iounmap(v) omap_iounmap(v)
#define INT_730_GPIO_BANK6 18
#define INT_730_SPGIO_WR 29
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_850_IH2_FIQ 0
+#define INT_850_IH2_IRQ 1
+#define INT_850_USB_NON_ISO 2
+#define INT_850_USB_ISO 3
+#define INT_850_ICR 4
+#define INT_850_EAC 5
+#define INT_850_GPIO_BANK1 6
+#define INT_850_GPIO_BANK2 7
+#define INT_850_GPIO_BANK3 8
+#define INT_850_McBSP2TX 10
+#define INT_850_McBSP2RX 11
+#define INT_850_McBSP2RX_OVF 12
+#define INT_850_LCD_LINE 14
+#define INT_850_GSM_PROTECT 15
+#define INT_850_TIMER3 16
+#define INT_850_GPIO_BANK5 17
+#define INT_850_GPIO_BANK6 18
+#define INT_850_SPGIO_WR 29
+
+
/*
* IRQ numbers for interrupt handler 2
*
#define INT_730_DMA_CH15 (62 + IH2_BASE)
#define INT_730_NAND (63 + IH2_BASE)
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_850_HW_ERRORS (0 + IH2_BASE)
+#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_850_CFCD (2 + IH2_BASE)
+#define INT_850_CFIREQ (3 + IH2_BASE)
+#define INT_850_I2C (4 + IH2_BASE)
+#define INT_850_PCC (5 + IH2_BASE)
+#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_850_SPI_100K_1 (7 + IH2_BASE)
+#define INT_850_SYREN_SPI (8 + IH2_BASE)
+#define INT_850_VLYNQ (9 + IH2_BASE)
+#define INT_850_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_850_McBSP1TX (11 + IH2_BASE)
+#define INT_850_McBSP1RX (12 + IH2_BASE)
+#define INT_850_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_850_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_850_MCSI (16 + IH2_BASE)
+#define INT_850_uWireTX (17 + IH2_BASE)
+#define INT_850_uWireRX (18 + IH2_BASE)
+#define INT_850_SMC_CD (19 + IH2_BASE)
+#define INT_850_SMC_IREQ (20 + IH2_BASE)
+#define INT_850_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_850_TIMER32K (22 + IH2_BASE)
+#define INT_850_MMC_SDIO (23 + IH2_BASE)
+#define INT_850_UPLD (24 + IH2_BASE)
+#define INT_850_USB_HHC_1 (27 + IH2_BASE)
+#define INT_850_USB_HHC_2 (28 + IH2_BASE)
+#define INT_850_USB_GENI (29 + IH2_BASE)
+#define INT_850_USB_OTG (30 + IH2_BASE)
+#define INT_850_CAMERA_IF (31 + IH2_BASE)
+#define INT_850_RNG (32 + IH2_BASE)
+#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_850_DBB_RF_EN (34 + IH2_BASE)
+#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_850_SHA1_MD5 (36 + IH2_BASE)
+#define INT_850_SPI_100K_2 (37 + IH2_BASE)
+#define INT_850_RNG_IDLE (38 + IH2_BASE)
+#define INT_850_MPUIO (39 + IH2_BASE)
+#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_850_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_850_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_850_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_850_DMA_CH6 (53 + IH2_BASE)
+#define INT_850_DMA_CH7 (54 + IH2_BASE)
+#define INT_850_DMA_CH8 (55 + IH2_BASE)
+#define INT_850_DMA_CH9 (56 + IH2_BASE)
+#define INT_850_DMA_CH10 (57 + IH2_BASE)
+#define INT_850_DMA_CH11 (58 + IH2_BASE)
+#define INT_850_DMA_CH12 (59 + IH2_BASE)
+#define INT_850_DMA_CH13 (60 + IH2_BASE)
+#define INT_850_DMA_CH14 (61 + IH2_BASE)
+#define INT_850_DMA_CH15 (62 + IH2_BASE)
+#define INT_850_NAND (63 + IH2_BASE)
+
#define INT_24XX_SYS_NIRQ 7
#define INT_24XX_SDMA_IRQ0 12
#define INT_24XX_SDMA_IRQ1 13
#define INT_34XX_BENCH_MPU_EMUL 3
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#define IH_GPIO_BASE (128 + IH2_BASE)
void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+ /* ctx */
+ void (*save_ctx)(struct omap_mbox *mbox);
+ void (*restore_ctx)(struct omap_mbox *mbox);
};
struct omap_mbox_queue {
mbox_msg_t seq_snd, seq_rcv;
- struct device dev;
+ struct device *dev;
struct omap_mbox *next;
void *priv;
struct omap_mbox *omap_mbox_get(const char *);
void omap_mbox_put(struct omap_mbox *);
-int omap_mbox_register(struct omap_mbox *);
+int omap_mbox_register(struct device *parent, struct omap_mbox *);
int omap_mbox_unregister(struct omap_mbox *);
+static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->save_ctx) {
+ dev_err(mbox->dev, "%s:\tno save\n", __func__);
+ return;
+ }
+
+ mbox->ops->save_ctx(mbox);
+}
+
+static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->restore_ctx) {
+ dev_err(mbox->dev, "%s:\tno restore\n", __func__);
+ return;
+ }
+
+ mbox->ops->restore_ctx(mbox);
+}
+
#endif /* MAILBOX_H */
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
- char const **clk_names;
- int num_clks;
};
struct omap_mcbsp {
/* Protect the field .free, while checking if the mcbsp is in use */
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
- struct clk **clks;
- int num_clks;
+ struct clk *iclk;
+ struct clk *fclk;
};
extern struct omap_mcbsp **mcbsp_ptr;
extern int omap_mcbsp_count;
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \
- (dma_addr_t)virt_to_lbus(page_address(page)) : \
- (dma_addr_t)__virt_to_phys(page_address(page));})
+#define __arch_page_to_dma(dev, page) \
+ ({ dma_addr_t __dma = page_to_phys(page); \
+ if (is_lbus_device(dev)) \
+ __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+ __dma; })
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
#define OMAP_MMC_MAX_SLOTS 2
struct omap_mmc_platform_data {
+ /* back-link to device */
+ struct device *dev;
/* number of slots per controller */
unsigned nr_slots:2;
.pull_bit = bit, \
.pull_val = status,
+#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
+ .mux_reg = OMAP850_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \
+ .pull_reg = OMAP850_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
#else
#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
.pull_bit = bit, \
.pull_val = status,
+#define MUX_REG_850(reg, mode_offset, mode) \
+ .mux_reg = OMAP850_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
#endif /* CONFIG_OMAP_MUX_DEBUG */
#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
/*
- * OMAP730 has a slightly different config for the pin mux.
+ * OMAP730/850 has a slightly different config for the pin mux.
* - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
* not the FUNC_MUX_CTRL_x regs from hardware.h
* - for pull-up/down, only has one enable bit which is is in the same register
PU_PD_REG(NA, 0) \
},
+#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \
+ pull_bit, pull_status, debug_status)\
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG_850(mux_reg, mode_offset, mode) \
+ PULL_REG_850(mux_reg, pull_bit, pull_status) \
+ PU_PD_REG(NA, 0) \
+},
+
+
#define MUX_CFG_24XX(desc, reg_offset, mode, \
pull_en, pull_mode, dbg) \
{ \
W17_730_USB_VBUSI,
};
+enum omap850_index {
+ /* OMAP 850 keyboard */
+ E2_850_KBR0,
+ J7_850_KBR1,
+ E1_850_KBR2,
+ F3_850_KBR3,
+ D2_850_KBR4,
+ C2_850_KBC0,
+ D3_850_KBC1,
+ E4_850_KBC2,
+ F4_850_KBC3,
+ E3_850_KBC4,
+
+ /* USB */
+ AA17_850_USB_DM,
+ W16_850_USB_PU_EN,
+ W17_850_USB_VBUSI,
+};
+
+
enum omap1xxx_index {
/* UART1 (BT_UART_GATING)*/
UART1_TX = 0,
* - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
* - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
*/
+ AF26_34XX_GPIO0,
+ AF22_34XX_GPIO9,
AH8_34XX_GPIO29,
+ U8_34XX_GPIO54_OUT,
+ U8_34XX_GPIO54_DOWN,
+ L8_34XX_GPIO63,
+ G25_34XX_GPIO86_OUT,
+ AG4_34XX_GPIO134_OUT,
+ AE4_34XX_GPIO136_OUT,
+ AF6_34XX_GPIO140_UP,
+ AE6_34XX_GPIO141,
+ AF5_34XX_GPIO142,
+ AE5_34XX_GPIO143,
+ H19_34XX_GPIO164_OUT,
J25_34XX_GPIO170,
};
#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
#define OMAP34XX_IC_BASE 0x48200000
+
+#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000)
+#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100)
+#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400)
+#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600)
+#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00)
+#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00)
+#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00)
+#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000)
+#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200)
+#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400)
+#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970)
+
+#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F)
+#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077)
+#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF)
+#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7)
+#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047)
+#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F)
+#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F)
+#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB)
+#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB)
+#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F)
+#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F)
+#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007)
+
#define OMAP34XX_IVA_INTC_BASE 0x40000000
#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
#define OMAP2_CM_BASE OMAP3430_CM_BASE
#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
#endif
--- /dev/null
+/* arch/arm/plat-omap/include/mach/omap850.h
+ *
+ * Hardware definitions for TI OMAP850 processor.
+ *
+ * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP850_H
+#define __ASM_ARCH_OMAP850_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP850_DSP_BASE 0xE0000000
+#define OMAP850_DSP_SIZE 0x50000
+#define OMAP850_DSP_START 0xE0000000
+
+#define OMAP850_DSPREG_BASE 0xE1000000
+#define OMAP850_DSPREG_SIZE SZ_128K
+#define OMAP850_DSPREG_START 0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_CONFIG_BASE 0xfffe1000
+#define OMAP850_IO_CONF_0 0xfffe1070
+#define OMAP850_IO_CONF_1 0xfffe1074
+#define OMAP850_IO_CONF_2 0xfffe1078
+#define OMAP850_IO_CONF_3 0xfffe107c
+#define OMAP850_IO_CONF_4 0xfffe1080
+#define OMAP850_IO_CONF_5 0xfffe1084
+#define OMAP850_IO_CONF_6 0xfffe1088
+#define OMAP850_IO_CONF_7 0xfffe108c
+#define OMAP850_IO_CONF_8 0xfffe1090
+#define OMAP850_IO_CONF_9 0xfffe1094
+#define OMAP850_IO_CONF_10 0xfffe1098
+#define OMAP850_IO_CONF_11 0xfffe109c
+#define OMAP850_IO_CONF_12 0xfffe10a0
+#define OMAP850_IO_CONF_13 0xfffe10a4
+
+#define OMAP850_MODE_1 0xfffe1010
+#define OMAP850_MODE_2 0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP850_MODE2_OFFSET 0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_FLASH_CFG_0 0xfffecc10
+#define OMAP850_FLASH_ACFG_0 0xfffecc50
+#define OMAP850_FLASH_CFG_1 0xfffecc14
+#define OMAP850_FLASH_ACFG_1 0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_ICR_BASE 0xfffbb800
+#define OMAP850_DSP_M_CTL 0xfffbb804
+#define OMAP850_DSP_MMU_BASE 0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900)
+#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /* __ASM_ARCH_OMAP850_H */
+
extern void prevent_idle_sleep(void);
extern void allow_idle_sleep(void);
-/**
- * clk_deny_idle - Prevents the clock from being idled during MPU idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-/**
- * clk_allow_idle - Counters previous clk_deny_idle
- * @clk: clock signal handle
- */
-void clk_allow_idle(struct clk *clk);
-
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
extern void omap730_cpu_suspend(unsigned short, unsigned short);
/*
* Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain is probably the worst case.
+ * CORE powerdomain on OMAP3 is the worst case
*/
-#define PWRDM_MAX_CLKDMS 3
+#define PWRDM_MAX_CLKDMS 4
/* XXX A completely arbitrary number. What is reasonable here? */
#define PWRDM_TRANSITION_BAILOUT 100000
int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_pwrst(struct powerdomain *pwrdm);
int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
-#define __ASM_ARM_ARCH_DPM_PRCM_H
+#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
+#define __ASM_ARM_ARCH_OMAP_PRCM_H
u32 omap_prcm_get_reset_sources(void);
+void omap_prcm_arch_reset(char mode);
#endif
/*
* OMAP2/3 SDRC/SMS register definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
- * Written by Paul Walmsley
+ * Tony Lindgren
+ * Paul Walmsley
+ * Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* SMS register access
*/
-
-#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+#define OMAP242X_SMS_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
/* SMS register offsets - read/write with sms_{read,write}_reg() */
#define SMS_SYSCONFIG 0x010
/* REVISIT: fill in other SMS registers here */
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip. These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files. The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+ unsigned long rate;
+ u32 actim_ctrla;
+ u32 actim_ctrlb;
+ u32 rfr_ctrl;
+ u32 mr;
+};
+
+void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
+struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+
+#ifdef CONFIG_ARCH_OMAP2
+
+struct memory_timings {
+ u32 m_type; /* ddr = 1, sdr = 0 */
+ u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
+ u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
+ u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
+ u32 base_cs; /* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+#endif /* CONFIG_ARCH_OMAP2 */
+
+#endif /* __ASSEMBLER__ */
+
#endif
#include <asm/mach-types.h>
#include <mach/hardware.h>
+#include <mach/prcm.h>
+
#ifndef CONFIG_MACH_VOICEBLUE
#define voiceblue_reset() do {} while (0)
+#else
+extern void voiceblue_reset(void);
#endif
-extern void omap_prcm_arch_reset(char mode);
-
static inline void arch_idle(void)
{
cpu_do_idle();
omap_writew(1, ARM_RSTCT1);
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if (!cpu_class_is_omap2())
omap1_arch_reset(mode);
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
+#ifdef CONFIG_USB_MUSB_SOC
+extern void usb_musb_init(void);
+#else
+static inline void usb_musb_init(void)
+{
+}
+#endif
+
#endif
+void omap_usb_init(struct omap_usb_config *pdata);
+
/*-------------------------------------------------------------------------*/
/*
/*
* OMAP mailbox driver
*
- * Copyright (C) 2006 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
*
- * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
- * Restructured by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
*/
-#include <linux/init.h>
#include <linux/module.h>
-#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include <linux/blkdev.h>
-#include <linux/err.h>
#include <linux/delay.h>
-#include <linux/io.h>
+
#include <mach/mailbox.h>
-#include "mailbox.h"
+
+static int enable_seq_bit;
+module_param(enable_seq_bit, bool, 0);
+MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking.");
static struct omap_mbox *mboxes;
static DEFINE_RWLOCK(mboxes_lock);
+/*
+ * Mailbox sequence bit API
+ */
+
+/* seq_rcv should be initialized with any value other than
+ * 0 and 1 << 31, to allow either value for the first
+ * message. */
+static inline void mbox_seq_init(struct omap_mbox *mbox)
+{
+ if (!enable_seq_bit)
+ return;
+
+ /* any value other than 0 and 1 << 31 */
+ mbox->seq_rcv = 0xffffffff;
+}
+
+static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
+{
+ if (!enable_seq_bit)
+ return;
+
+ /* add seq_snd to msg */
+ *msg = (*msg & 0x7fffffff) | mbox->seq_snd;
+ /* flip seq_snd */
+ mbox->seq_snd ^= 1 << 31;
+}
+
+static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+ mbox_msg_t seq;
+
+ if (!enable_seq_bit)
+ return 0;
+
+ seq = msg & (1 << 31);
+ if (seq == mbox->seq_rcv)
+ return -1;
+ mbox->seq_rcv = seq;
+ return 0;
+}
+
+/* Mailbox FIFO handle functions */
+static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_read(mbox);
+}
+static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+ mbox->ops->fifo_write(mbox, msg);
+}
+static inline int mbox_fifo_empty(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_empty(mbox);
+}
+static inline int mbox_fifo_full(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_full(mbox);
+}
+
+/* Mailbox IRQ handle functions */
+static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ mbox->ops->enable_irq(mbox, irq);
+}
+static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ mbox->ops->disable_irq(mbox, irq);
+}
+static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ if (mbox->ops->ack_irq)
+ mbox->ops->ack_irq(mbox, irq);
+}
+static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ return mbox->ops->is_irq(mbox, irq);
+}
+
/* Mailbox Sequence Bit function */
void omap_mbox_init_seq(struct omap_mbox *mbox)
{
unsigned long flags;
if (mbox->rxq->callback == NULL) {
- sysfs_notify(&mbox->dev.kobj, NULL, "mbox");
+ sysfs_notify(&mbox->dev->kobj, NULL, "mbox");
return;
}
/* no more messages in the fifo. clear IRQ source. */
ack_mbox_irq(mbox, IRQ_RX);
enable_mbox_irq(mbox, IRQ_RX);
- nomem:
+nomem:
schedule_work(&mbox->rxq->work);
}
static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL);
static struct class omap_mbox_class = {
- .name = "omap_mbox",
+ .name = "omap-mailbox",
};
static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
return ret;
}
- mbox->dev.class = &omap_mbox_class;
- dev_set_name(&mbox->dev, "%s", mbox->name);
- dev_set_drvdata(&mbox->dev, mbox);
-
- ret = device_register(&mbox->dev);
- if (unlikely(ret))
- goto fail_device_reg;
-
- ret = device_create_file(&mbox->dev, &dev_attr_mbox);
- if (unlikely(ret)) {
- printk(KERN_ERR
- "device_create_file failed: %d\n", ret);
- goto fail_create_mbox;
- }
-
ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED,
mbox->name, mbox);
if (unlikely(ret)) {
fail_alloc_txq:
free_irq(mbox->irq, mbox);
fail_request_irq:
- device_remove_file(&mbox->dev, &dev_attr_mbox);
- fail_create_mbox:
- device_unregister(&mbox->dev);
- fail_device_reg:
if (unlikely(mbox->ops->shutdown))
mbox->ops->shutdown(mbox);
mbox_queue_free(mbox->rxq);
free_irq(mbox->irq, mbox);
- device_remove_file(&mbox->dev, &dev_attr_mbox);
- class_unregister(&omap_mbox_class);
if (unlikely(mbox->ops->shutdown))
mbox->ops->shutdown(mbox);
}
EXPORT_SYMBOL(omap_mbox_put);
-int omap_mbox_register(struct omap_mbox *mbox)
+int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
{
int ret = 0;
struct omap_mbox **tmp;
if (mbox->next)
return -EBUSY;
+ mbox->dev = device_create(&omap_mbox_class,
+ parent, 0, mbox, "%s", mbox->name);
+ if (IS_ERR(mbox->dev))
+ return PTR_ERR(mbox->dev);
+
+ ret = device_create_file(mbox->dev, &dev_attr_mbox);
+ if (ret)
+ goto err_sysfs;
+
write_lock(&mboxes_lock);
tmp = find_mboxes(mbox->name);
- if (*tmp)
+ if (*tmp) {
ret = -EBUSY;
- else
- *tmp = mbox;
+ write_unlock(&mboxes_lock);
+ goto err_find;
+ }
+ *tmp = mbox;
write_unlock(&mboxes_lock);
+ return 0;
+
+err_find:
+ device_remove_file(mbox->dev, &dev_attr_mbox);
+err_sysfs:
+ device_unregister(mbox->dev);
return ret;
}
EXPORT_SYMBOL(omap_mbox_register);
*tmp = mbox->next;
mbox->next = NULL;
write_unlock(&mboxes_lock);
+ device_remove_file(mbox->dev, &dev_attr_mbox);
+ device_unregister(mbox->dev);
return 0;
}
tmp = &(*tmp)->next;
subsys_initcall(omap_mbox_class_init);
module_exit(omap_mbox_class_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
+MODULE_AUTHOR("Toshihiro Kobayashi and Hiroshi DOYU");
+++ /dev/null
-/*
- * Mailbox internal functions
- *
- * Copyright (C) 2006 Nokia Corporation
- * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ARCH_ARM_PLAT_MAILBOX_H
-#define __ARCH_ARM_PLAT_MAILBOX_H
-
-/*
- * Mailbox sequence bit API
- */
-#if defined(CONFIG_ARCH_OMAP1)
-# define MBOX_USE_SEQ_BIT
-#elif defined(CONFIG_ARCH_OMAP2)
-# define MBOX_USE_SEQ_BIT
-#endif
-
-#ifdef MBOX_USE_SEQ_BIT
-/* seq_rcv should be initialized with any value other than
- * 0 and 1 << 31, to allow either value for the first
- * message. */
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
- /* any value other than 0 and 1 << 31 */
- mbox->seq_rcv = 0xffffffff;
-}
-
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
- /* add seq_snd to msg */
- *msg = (*msg & 0x7fffffff) | mbox->seq_snd;
- /* flip seq_snd */
- mbox->seq_snd ^= 1 << 31;
-}
-
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- mbox_msg_t seq = msg & (1 << 31);
- if (seq == mbox->seq_rcv)
- return -1;
- mbox->seq_rcv = seq;
- return 0;
-}
-#else
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-}
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-}
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- return 0;
-}
-#endif
-
-/* Mailbox FIFO handle functions */
-static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_read(mbox);
-}
-static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- mbox->ops->fifo_write(mbox, msg);
-}
-static inline int mbox_fifo_empty(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_empty(mbox);
-}
-static inline int mbox_fifo_full(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_full(mbox);
-}
-
-/* Mailbox IRQ handle functions */
-static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- mbox->ops->enable_irq(mbox, irq);
-}
-static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- mbox->ops->disable_irq(mbox, irq);
-}
-static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- if (mbox->ops->ack_irq)
- mbox->ops->ack_irq(mbox, irq);
-}
-static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- return mbox->ops->is_irq(mbox, irq);
-}
-
-#endif /* __ARCH_ARM_PLAT_MAILBOX_H */
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
- int i;
int err;
if (!omap_mcbsp_check_valid_id(id)) {
}
mcbsp = id_to_mcbsp_ptr(id);
- if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
- mcbsp->pdata->ops->request(id);
-
- for (i = 0; i < mcbsp->num_clks; i++)
- clk_enable(mcbsp->clks[i]);
-
spin_lock(&mcbsp->lock);
if (!mcbsp->free) {
dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
mcbsp->id);
spin_unlock(&mcbsp->lock);
- return -1;
+ return -EBUSY;
}
mcbsp->free = 0;
spin_unlock(&mcbsp->lock);
+ if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
+ mcbsp->pdata->ops->request(id);
+
+ clk_enable(mcbsp->iclk);
+ clk_enable(mcbsp->fclk);
+
/*
* Make sure that transmitter, receiver and sample-rate generator are
* not running before activating IRQs.
void omap_mcbsp_free(unsigned int id)
{
struct omap_mcbsp *mcbsp;
- int i;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- for (i = mcbsp->num_clks - 1; i >= 0; i--)
- clk_disable(mcbsp->clks[i]);
+ clk_disable(mcbsp->fclk);
+ clk_disable(mcbsp->iclk);
+
+ if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
+ /* Free IRQs */
+ free_irq(mcbsp->rx_irq, (void *)mcbsp);
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
+ }
spin_lock(&mcbsp->lock);
if (mcbsp->free) {
mcbsp->free = 1;
spin_unlock(&mcbsp->lock);
-
- if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
- /* Free IRQs */
- free_irq(mcbsp->rx_irq, (void *)mcbsp);
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
- }
}
EXPORT_SYMBOL(omap_mcbsp_free);
struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
struct omap_mcbsp *mcbsp;
int id = pdev->id - 1;
- int i;
int ret = 0;
if (!pdata) {
ret = -ENOMEM;
goto exit;
}
- mcbsp_ptr[id] = mcbsp;
spin_lock_init(&mcbsp->lock);
mcbsp->id = id + 1;
mcbsp->dma_rx_sync = pdata->dma_rx_sync;
mcbsp->dma_tx_sync = pdata->dma_tx_sync;
- if (pdata->num_clks) {
- mcbsp->num_clks = pdata->num_clks;
- mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
- GFP_KERNEL);
- if (!mcbsp->clks) {
- ret = -ENOMEM;
- goto exit;
- }
- for (i = 0; i < mcbsp->num_clks; i++) {
- mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
- if (IS_ERR(mcbsp->clks[i])) {
- dev_err(&pdev->dev,
- "Invalid %s configuration for McBSP%d.\n",
- pdata->clk_names[i], mcbsp->id);
- ret = PTR_ERR(mcbsp->clks[i]);
- goto err_clk;
- }
- }
+ mcbsp->iclk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(mcbsp->iclk)) {
+ ret = PTR_ERR(mcbsp->iclk);
+ dev_err(&pdev->dev, "unable to get ick: %d\n", ret);
+ goto err_iclk;
+ }
+ mcbsp->fclk = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(mcbsp->fclk)) {
+ ret = PTR_ERR(mcbsp->fclk);
+ dev_err(&pdev->dev, "unable to get fck: %d\n", ret);
+ goto err_fclk;
}
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
+ mcbsp_ptr[id] = mcbsp;
platform_set_drvdata(pdev, mcbsp);
return 0;
-err_clk:
- while (i--)
- clk_put(mcbsp->clks[i]);
- kfree(mcbsp->clks);
+err_fclk:
+ clk_put(mcbsp->iclk);
+err_iclk:
iounmap(mcbsp->io_base);
err_ioremap:
- mcbsp->free = 0;
+ kfree(mcbsp);
exit:
return ret;
}
static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
{
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
- int i;
platform_set_drvdata(pdev, NULL);
if (mcbsp) {
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- for (i = mcbsp->num_clks - 1; i >= 0; i--) {
- clk_disable(mcbsp->clks[i]);
- clk_put(mcbsp->clks[i]);
- }
+ clk_disable(mcbsp->fclk);
+ clk_disable(mcbsp->iclk);
+ clk_put(mcbsp->fclk);
+ clk_put(mcbsp->iclk);
iounmap(mcbsp->io_base);
- if (mcbsp->num_clks) {
- kfree(mcbsp->clks);
- mcbsp->clks = NULL;
- mcbsp->num_clks = 0;
- }
+ mcbsp->fclk = NULL;
+ mcbsp->iclk = NULL;
mcbsp->free = 0;
mcbsp->dev = NULL;
}
/* Register the McBSP driver */
return platform_driver_register(&omap_mcbsp_driver);
}
-
omap_sram_base = OMAP1_SRAM_VA;
omap_sram_start = OMAP1_SRAM_PA;
- if (cpu_is_omap730())
+ if (cpu_is_omap7xx())
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
/*-------------------------------------------------------------------------*/
-static struct omap_usb_config platform_data;
-
-static int __init
-omap_usb_init(void)
+void __init omap_usb_init(struct omap_usb_config *pdata)
{
- const struct omap_usb_config *config;
-
- config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config);
- if (config == NULL) {
- printk(KERN_ERR "USB: No board-specific "
- "platform config found\n");
- return -ENODEV;
- }
- platform_data = *config;
-
if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
- omap_otg_init(&platform_data);
+ omap_otg_init(pdata);
else if (cpu_is_omap15xx())
- omap_1510_usb_init(&platform_data);
- else {
+ omap_1510_usb_init(pdata);
+ else
printk(KERN_ERR "USB: No init for your chip yet\n");
- return -ENODEV;
- }
- return 0;
}
-subsys_initcall(omap_usb_init);
static DEFINE_SPINLOCK(gpio_lock);
static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
-static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
+static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
+static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
static inline void __set_direction(unsigned pin, int input)
{
{
unsigned long flags;
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
unsigned long flags;
u32 u;
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
unsigned long flags;
int ret;
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ if (pin >= GPIO_MAX ||
+ !(test_bit(pin, gpio_valid_input) ||
+ test_bit(pin, gpio_valid_output))) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
void gpio_free(unsigned pin)
{
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ if (pin >= GPIO_MAX ||
+ !(test_bit(pin, gpio_valid_input) ||
+ test_bit(pin, gpio_valid_output))) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return;
}
__set_direction(pin, 0);
}
-void __init orion_gpio_set_valid(unsigned pin, int valid)
+void __init orion_gpio_set_valid(unsigned pin, int mode)
{
- if (valid)
- __set_bit(pin, gpio_valid);
+ if (mode == 1)
+ mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
+ if (mode & GPIO_INPUT_OK)
+ __set_bit(pin, gpio_valid_input);
else
- __clear_bit(pin, gpio_valid);
+ __clear_bit(pin, gpio_valid_input);
+ if (mode & GPIO_OUTPUT_OK)
+ __set_bit(pin, gpio_valid_output);
+ else
+ __clear_bit(pin, gpio_valid_output);
}
void orion_gpio_set_blink(unsigned pin, int blink)
* Orion-specific GPIO API extensions.
*/
void orion_gpio_set_unused(unsigned pin);
-void orion_gpio_set_valid(unsigned pin, int valid);
void orion_gpio_set_blink(unsigned pin, int blink);
+#define GPIO_BIDI_OK (1 << 0)
+#define GPIO_INPUT_OK (1 << 1)
+#define GPIO_OUTPUT_OK (1 << 2)
+void orion_gpio_set_valid(unsigned pin, int mode);
+
/*
* GPIO interrupt handling.
*/
--- /dev/null
+/*
+ * arch/arm/plat-orion/include/plat/mvsdio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVSDIO_H
+#define __MACH_MVSDIO_H
+
+#include <linux/mbus.h>
+
+struct mvsdio_platform_data {
+ struct mbus_dram_target_info *dram;
+ unsigned int clock;
+ int gpio_card_detect;
+ int gpio_write_protect;
+};
+
+#endif
--- /dev/null
+if PLAT_PXA
+
+endif
--- /dev/null
+#
+# Makefile for code common across different PXA processor families
+#
+
+obj-y := dma.o mfp.o
+
+obj-$(CONFIG_GENERIC_GPIO) += gpio.o
/*
- * linux/arch/arm/mach-pxa/dma.c
+ * linux/arch/arm/plat-pxa/dma.c
*
* PXA DMA registration and IRQ dispatching
*
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
-
struct dma_channel {
char *name;
pxa_dma_prio prio;
static int num_dma_channels;
int pxa_request_dma (char *name, pxa_dma_prio prio,
- void (*irq_handler)(int, void *),
- void *data)
+ void (*irq_handler)(int, void *),
+ void *data)
{
unsigned long flags;
int i, found = 0;
return IRQ_HANDLED;
}
-int __init pxa_init_dma(int num_ch)
+int __init pxa_init_dma(int irq, int num_ch)
{
int i, ret;
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
}
- ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+ ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
if (ret) {
printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n");
kfree(dma_channels);
--- /dev/null
+/*
+ * linux/arch/arm/plat-pxa/gpio.c
+ *
+ * Generic PXA GPIO handling
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/bootmem.h>
+
+#include <mach/gpio.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+ char label[10];
+
+ unsigned long irq_mask;
+ unsigned long irq_edge_rise;
+ unsigned long irq_edge_fall;
+
+#ifdef CONFIG_PM
+ unsigned long saved_gplr;
+ unsigned long saved_gpdr;
+ unsigned long saved_grer;
+ unsigned long saved_gfer;
+#endif
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c) \
+ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+ return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+{
+ return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t value, mask = 1 << offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ value = __raw_readl(base + GPDR_OFFSET);
+ if (__gpio_is_inverted(chip->base + offset))
+ value |= mask;
+ else
+ value &= ~mask;
+ __raw_writel(value, base + GPDR_OFFSET);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t tmp, mask = 1 << offset;
+ unsigned long flags;
+
+ __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ tmp = __raw_readl(base + GPDR_OFFSET);
+ if (__gpio_is_inverted(chip->base + offset))
+ tmp &= ~mask;
+ else
+ tmp |= mask;
+ __raw_writel(tmp, base + GPDR_OFFSET);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ __raw_writel(1 << offset, gpio_chip_base(chip) +
+ (value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+ int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+ struct pxa_gpio_chip *chips;
+
+ /* this is early, we have to use bootmem allocator, and we really
+ * want this to be allocated dynamically for different 'gpio_end'
+ */
+ chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+ if (chips == NULL) {
+ pr_err("%s: failed to allocate GPIO chips\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+ struct gpio_chip *c = &chips[i].chip;
+
+ sprintf(chips[i].label, "gpio-%d", i);
+ chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+
+ c->base = gpio;
+ c->label = chips[i].label;
+
+ c->direction_input = pxa_gpio_direction_input;
+ c->direction_output = pxa_gpio_direction_output;
+ c->get = pxa_gpio_get;
+ c->set = pxa_gpio_set;
+
+ /* number of GPIOs on last bank may be less than 32 */
+ c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+ gpiochip_add(c);
+ }
+ pxa_gpio_chips = chips;
+ return 0;
+}
+
+static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+ struct pxa_gpio_chip *c;
+ int gpio = irq_to_gpio(irq);
+ unsigned long gpdr, mask = GPIO_bit(gpio);
+
+ c = gpio_to_chip(gpio);
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* Don't mess with enabled GPIOs using preconfigured edges or
+ * GPIOs set to alternate function or to output during probe
+ */
+ if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+ return 0;
+
+ if (__gpio_is_occupied(gpio))
+ return 0;
+
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
+ if (__gpio_is_inverted(gpio))
+ __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET);
+ else
+ __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ c->irq_edge_rise |= mask;
+ else
+ c->irq_edge_rise &= ~mask;
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ c->irq_edge_fall |= mask;
+ else
+ c->irq_edge_fall &= ~mask;
+
+ __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+ __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+
+ pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
+ ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
+ ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+ return 0;
+}
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct pxa_gpio_chip *c;
+ int loop, gpio, gpio_base, n;
+ unsigned long gedr;
+
+ do {
+ loop = 0;
+ for_each_gpio_chip(gpio, c) {
+ gpio_base = c->chip.base;
+
+ gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+ gedr = gedr & c->irq_mask;
+ __raw_writel(gedr, c->regbase + GEDR_OFFSET);
+
+ n = find_first_bit(&gedr, BITS_PER_LONG);
+ while (n < BITS_PER_LONG) {
+ loop = 1;
+
+ generic_handle_irq(gpio_to_irq(gpio_base + n));
+ n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+ }
+ }
+ } while (loop);
+}
+
+static void pxa_ack_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+ __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+ uint32_t grer, gfer;
+
+ c->irq_mask &= ~GPIO_bit(gpio);
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static void pxa_unmask_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+ c->irq_mask |= GPIO_bit(gpio);
+ __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+ __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+ .name = "GPIO",
+ .ack = pxa_ack_muxed_gpio,
+ .mask = pxa_mask_muxed_gpio,
+ .unmask = pxa_unmask_muxed_gpio,
+ .set_type = pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+{
+ struct pxa_gpio_chip *c;
+ int gpio, irq;
+
+ pxa_last_gpio = end;
+
+ /* Initialize GPIO chips */
+ pxa_init_gpio_chip(end);
+
+ /* clear all GPIO edge detects */
+ for_each_gpio_chip(gpio, c) {
+ __raw_writel(0, c->regbase + GFER_OFFSET);
+ __raw_writel(0, c->regbase + GRER_OFFSET);
+ __raw_writel(~0,c->regbase + GEDR_OFFSET);
+ }
+
+ for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+ set_irq_chip(irq, &pxa_muxed_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ /* Install handler for GPIO>=2 edge detect interrupts */
+ set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler);
+ pxa_muxed_gpio_chip.set_wake = fn;
+}
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct pxa_gpio_chip *c;
+ int gpio;
+
+ for_each_gpio_chip(gpio, c) {
+ c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+ c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+ c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+ c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+
+ /* Clear GPIO transition detect bits */
+ __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+ }
+ return 0;
+}
+
+static int pxa_gpio_resume(struct sys_device *dev)
+{
+ struct pxa_gpio_chip *c;
+ int gpio;
+
+ for_each_gpio_chip(gpio, c) {
+ /* restore level with set/clear */
+ __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+ __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+ __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+ __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+ __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+ }
+ return 0;
+}
+#else
+#define pxa_gpio_suspend NULL
+#define pxa_gpio_resume NULL
+#endif
+
+struct sysdev_class pxa_gpio_sysclass = {
+ .name = "gpio",
+ .suspend = pxa_gpio_suspend,
+ .resume = pxa_gpio_resume,
+};
+
+static int __init pxa_gpio_init(void)
+{
+ return sysdev_class_register(&pxa_gpio_sysclass);
+}
+
+core_initcall(pxa_gpio_init);
--- /dev/null
+#ifndef __PLAT_DMA_H
+#define __PLAT_DMA_H
+
+#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
+
+#define DCSR(n) DMAC_REG((n) << 2)
+#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */
+#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */
+#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4))
+#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4))
+#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4))
+#define DCMD(n) DMAC_REG(0x020c + ((n) << 4))
+#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
+ (((n) & 0x3f) << 2))
+
+#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
+#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
+#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
+#define DDADR_STOP (1 << 0) /* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+ volatile u32 ddadr; /* Points to the next descriptor + flags */
+ volatile u32 dsadr; /* DSADR value for the current transfer */
+ volatile u32 dtadr; /* DTADR value for the current transfer */
+ volatile u32 dcmd; /* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int irq, int num_ch);
+
+int pxa_request_dma (char *name,
+ pxa_dma_prio prio,
+ void (*irq_handler)(int, void *),
+ void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* __PLAT_DMA_H */
--- /dev/null
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+ return GPLR(gpio) & GPIO_bit(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+ if (value)
+ GPSR(gpio) = GPIO_bit(gpio);
+ else
+ GPCR(gpio) = GPIO_bit(gpio);
+ } else
+ __gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+#endif /* __PLAT_GPIO_H */
--- /dev/null
+/*
+ * arch/arm/plat-pxa/include/plat/mfp.h
+ *
+ * Common Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_MFP_H
+#define __ASM_PLAT_MFP_H
+
+#define mfp_to_gpio(m) ((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+ MFP_PIN_INVALID = -1,
+
+ MFP_PIN_GPIO0 = 0,
+ MFP_PIN_GPIO1,
+ MFP_PIN_GPIO2,
+ MFP_PIN_GPIO3,
+ MFP_PIN_GPIO4,
+ MFP_PIN_GPIO5,
+ MFP_PIN_GPIO6,
+ MFP_PIN_GPIO7,
+ MFP_PIN_GPIO8,
+ MFP_PIN_GPIO9,
+ MFP_PIN_GPIO10,
+ MFP_PIN_GPIO11,
+ MFP_PIN_GPIO12,
+ MFP_PIN_GPIO13,
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO16,
+ MFP_PIN_GPIO17,
+ MFP_PIN_GPIO18,
+ MFP_PIN_GPIO19,
+ MFP_PIN_GPIO20,
+ MFP_PIN_GPIO21,
+ MFP_PIN_GPIO22,
+ MFP_PIN_GPIO23,
+ MFP_PIN_GPIO24,
+ MFP_PIN_GPIO25,
+ MFP_PIN_GPIO26,
+ MFP_PIN_GPIO27,
+ MFP_PIN_GPIO28,
+ MFP_PIN_GPIO29,
+ MFP_PIN_GPIO30,
+ MFP_PIN_GPIO31,
+ MFP_PIN_GPIO32,
+ MFP_PIN_GPIO33,
+ MFP_PIN_GPIO34,
+ MFP_PIN_GPIO35,
+ MFP_PIN_GPIO36,
+ MFP_PIN_GPIO37,
+ MFP_PIN_GPIO38,
+ MFP_PIN_GPIO39,
+ MFP_PIN_GPIO40,
+ MFP_PIN_GPIO41,
+ MFP_PIN_GPIO42,
+ MFP_PIN_GPIO43,
+ MFP_PIN_GPIO44,
+ MFP_PIN_GPIO45,
+ MFP_PIN_GPIO46,
+ MFP_PIN_GPIO47,
+ MFP_PIN_GPIO48,
+ MFP_PIN_GPIO49,
+ MFP_PIN_GPIO50,
+ MFP_PIN_GPIO51,
+ MFP_PIN_GPIO52,
+ MFP_PIN_GPIO53,
+ MFP_PIN_GPIO54,
+ MFP_PIN_GPIO55,
+ MFP_PIN_GPIO56,
+ MFP_PIN_GPIO57,
+ MFP_PIN_GPIO58,
+ MFP_PIN_GPIO59,
+ MFP_PIN_GPIO60,
+ MFP_PIN_GPIO61,
+ MFP_PIN_GPIO62,
+ MFP_PIN_GPIO63,
+ MFP_PIN_GPIO64,
+ MFP_PIN_GPIO65,
+ MFP_PIN_GPIO66,
+ MFP_PIN_GPIO67,
+ MFP_PIN_GPIO68,
+ MFP_PIN_GPIO69,
+ MFP_PIN_GPIO70,
+ MFP_PIN_GPIO71,
+ MFP_PIN_GPIO72,
+ MFP_PIN_GPIO73,
+ MFP_PIN_GPIO74,
+ MFP_PIN_GPIO75,
+ MFP_PIN_GPIO76,
+ MFP_PIN_GPIO77,
+ MFP_PIN_GPIO78,
+ MFP_PIN_GPIO79,
+ MFP_PIN_GPIO80,
+ MFP_PIN_GPIO81,
+ MFP_PIN_GPIO82,
+ MFP_PIN_GPIO83,
+ MFP_PIN_GPIO84,
+ MFP_PIN_GPIO85,
+ MFP_PIN_GPIO86,
+ MFP_PIN_GPIO87,
+ MFP_PIN_GPIO88,
+ MFP_PIN_GPIO89,
+ MFP_PIN_GPIO90,
+ MFP_PIN_GPIO91,
+ MFP_PIN_GPIO92,
+ MFP_PIN_GPIO93,
+ MFP_PIN_GPIO94,
+ MFP_PIN_GPIO95,
+ MFP_PIN_GPIO96,
+ MFP_PIN_GPIO97,
+ MFP_PIN_GPIO98,
+ MFP_PIN_GPIO99,
+ MFP_PIN_GPIO100,
+ MFP_PIN_GPIO101,
+ MFP_PIN_GPIO102,
+ MFP_PIN_GPIO103,
+ MFP_PIN_GPIO104,
+ MFP_PIN_GPIO105,
+ MFP_PIN_GPIO106,
+ MFP_PIN_GPIO107,
+ MFP_PIN_GPIO108,
+ MFP_PIN_GPIO109,
+ MFP_PIN_GPIO110,
+ MFP_PIN_GPIO111,
+ MFP_PIN_GPIO112,
+ MFP_PIN_GPIO113,
+ MFP_PIN_GPIO114,
+ MFP_PIN_GPIO115,
+ MFP_PIN_GPIO116,
+ MFP_PIN_GPIO117,
+ MFP_PIN_GPIO118,
+ MFP_PIN_GPIO119,
+ MFP_PIN_GPIO120,
+ MFP_PIN_GPIO121,
+ MFP_PIN_GPIO122,
+ MFP_PIN_GPIO123,
+ MFP_PIN_GPIO124,
+ MFP_PIN_GPIO125,
+ MFP_PIN_GPIO126,
+ MFP_PIN_GPIO127,
+ MFP_PIN_GPIO0_2,
+ MFP_PIN_GPIO1_2,
+ MFP_PIN_GPIO2_2,
+ MFP_PIN_GPIO3_2,
+ MFP_PIN_GPIO4_2,
+ MFP_PIN_GPIO5_2,
+ MFP_PIN_GPIO6_2,
+ MFP_PIN_GPIO7_2,
+ MFP_PIN_GPIO8_2,
+ MFP_PIN_GPIO9_2,
+ MFP_PIN_GPIO10_2,
+ MFP_PIN_GPIO11_2,
+ MFP_PIN_GPIO12_2,
+ MFP_PIN_GPIO13_2,
+ MFP_PIN_GPIO14_2,
+ MFP_PIN_GPIO15_2,
+ MFP_PIN_GPIO16_2,
+ MFP_PIN_GPIO17_2,
+
+ MFP_PIN_ULPI_STP,
+ MFP_PIN_ULPI_NXT,
+ MFP_PIN_ULPI_DIR,
+
+ MFP_PIN_nXCVREN,
+ MFP_PIN_DF_CLE_nOE,
+ MFP_PIN_DF_nADV1_ALE,
+ MFP_PIN_DF_SCLK_E,
+ MFP_PIN_DF_SCLK_S,
+ MFP_PIN_nBE0,
+ MFP_PIN_nBE1,
+ MFP_PIN_DF_nADV2_ALE,
+ MFP_PIN_DF_INT_RnB,
+ MFP_PIN_DF_nCS0,
+ MFP_PIN_DF_nCS1,
+ MFP_PIN_nLUA,
+ MFP_PIN_nLLA,
+ MFP_PIN_DF_nWE,
+ MFP_PIN_DF_ALE_nWE,
+ MFP_PIN_DF_nRE_nOE,
+ MFP_PIN_DF_ADDR0,
+ MFP_PIN_DF_ADDR1,
+ MFP_PIN_DF_ADDR2,
+ MFP_PIN_DF_ADDR3,
+ MFP_PIN_DF_IO0,
+ MFP_PIN_DF_IO1,
+ MFP_PIN_DF_IO2,
+ MFP_PIN_DF_IO3,
+ MFP_PIN_DF_IO4,
+ MFP_PIN_DF_IO5,
+ MFP_PIN_DF_IO6,
+ MFP_PIN_DF_IO7,
+ MFP_PIN_DF_IO8,
+ MFP_PIN_DF_IO9,
+ MFP_PIN_DF_IO10,
+ MFP_PIN_DF_IO11,
+ MFP_PIN_DF_IO12,
+ MFP_PIN_DF_IO13,
+ MFP_PIN_DF_IO14,
+ MFP_PIN_DF_IO15,
+ MFP_PIN_DF_nCS0_SM_nCS2,
+ MFP_PIN_DF_nCS1_SM_nCS3,
+ MFP_PIN_SM_nCS0,
+ MFP_PIN_SM_nCS1,
+ MFP_PIN_DF_WEn,
+ MFP_PIN_DF_REn,
+ MFP_PIN_DF_CLE_SM_OEn,
+ MFP_PIN_DF_ALE_SM_WEn,
+ MFP_PIN_DF_RDY0,
+ MFP_PIN_DF_RDY1,
+
+ MFP_PIN_SM_SCLK,
+ MFP_PIN_SM_BE0,
+ MFP_PIN_SM_BE1,
+ MFP_PIN_SM_ADV,
+ MFP_PIN_SM_ADVMUX,
+ MFP_PIN_SM_RDY,
+
+ MFP_PIN_MMC1_DAT7,
+ MFP_PIN_MMC1_DAT6,
+ MFP_PIN_MMC1_DAT5,
+ MFP_PIN_MMC1_DAT4,
+ MFP_PIN_MMC1_DAT3,
+ MFP_PIN_MMC1_DAT2,
+ MFP_PIN_MMC1_DAT1,
+ MFP_PIN_MMC1_DAT0,
+ MFP_PIN_MMC1_CMD,
+ MFP_PIN_MMC1_CLK,
+ MFP_PIN_MMC1_CD,
+ MFP_PIN_MMC1_WP,
+
+ /* additional pins on PXA930 */
+ MFP_PIN_GSIM_UIO,
+ MFP_PIN_GSIM_UCLK,
+ MFP_PIN_GSIM_UDET,
+ MFP_PIN_GSIM_nURST,
+ MFP_PIN_PMIC_INT,
+ MFP_PIN_RDY,
+
+ MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * alternate function = 0,
+ * drive strength = fast 3mA (MFP_DS03X)
+ * low power mode = default
+ * edge detection = none
+ *
+ * MFP_CFG - default MFPR value with alternate function
+ * MFP_CFG_DRV - default MFPR value with alternate function and
+ * pin drive strength
+ * MFP_CFG_LPM - default MFPR value with alternate function and
+ * low power mode
+ * MFP_CFG_X - default MFPR value with alternate function,
+ * pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x) ((x) & 0x3ff)
+
+#define MFP_AF0 (0x0 << 10)
+#define MFP_AF1 (0x1 << 10)
+#define MFP_AF2 (0x2 << 10)
+#define MFP_AF3 (0x3 << 10)
+#define MFP_AF4 (0x4 << 10)
+#define MFP_AF5 (0x5 << 10)
+#define MFP_AF6 (0x6 << 10)
+#define MFP_AF7 (0x7 << 10)
+#define MFP_AF_MASK (0x7 << 10)
+#define MFP_AF(x) (((x) >> 10) & 0x7)
+
+#define MFP_DS01X (0x0 << 13)
+#define MFP_DS02X (0x1 << 13)
+#define MFP_DS03X (0x2 << 13)
+#define MFP_DS04X (0x3 << 13)
+#define MFP_DS06X (0x4 << 13)
+#define MFP_DS08X (0x5 << 13)
+#define MFP_DS10X (0x6 << 13)
+#define MFP_DS13X (0x7 << 13)
+#define MFP_DS_MASK (0x7 << 13)
+#define MFP_DS(x) (((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT (0x0 << 16)
+#define MFP_LPM_DRIVE_LOW (0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
+#define MFP_LPM_PULL_LOW (0x3 << 16)
+#define MFP_LPM_PULL_HIGH (0x4 << 16)
+#define MFP_LPM_FLOAT (0x5 << 16)
+#define MFP_LPM_INPUT (0x6 << 16)
+#define MFP_LPM_STATE_MASK (0x7 << 16)
+#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE (0x0 << 19)
+#define MFP_LPM_EDGE_RISE (0x1 << 19)
+#define MFP_LPM_EDGE_FALL (0x2 << 19)
+#define MFP_LPM_EDGE_BOTH (0x3 << 19)
+#define MFP_LPM_EDGE_MASK (0x3 << 19)
+#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE (0x0 << 21)
+#define MFP_PULL_LOW (0x1 << 21)
+#define MFP_PULL_HIGH (0x2 << 21)
+#define MFP_PULL_BOTH (0x3 << 21)
+#define MFP_PULL_MASK (0x3 << 21)
+#define MFP_PULL(x) (((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+ MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af) \
+ ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by mfp_init()
+ *
+ * mfp_init_base() - accepts a virtual base for all MFPR registers and
+ * initialize the MFP table to a default state
+ *
+ * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
+ * represents a range of MFP pins from "start" to "end", with the offset
+ * begining at "offset", to define a single pin, let "end" = -1.
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR() to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct mfp_addr_map {
+ unsigned int start;
+ unsigned int end;
+ unsigned long offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+ { MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+ { MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
+
+void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_addr(struct mfp_addr_map *map);
+
+/*
+ * mfp_{read, write}() - for direct read/write access to the MFPR register
+ * mfp_config() - for configuring a group of MFPR registers
+ * mfp_config_lpm() - configuring all low power MFPR registers for suspend
+ * mfp_config_run() - configuring all run time MFPR registers after resume
+ */
+unsigned long mfp_read(int mfp);
+void mfp_write(int mfp, unsigned long mfpr_val);
+void mfp_config(unsigned long *mfp_cfgs, int num);
+void mfp_config_run(void);
+void mfp_config_lpm(void);
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+
+#endif /* __ASM_PLAT_MFP_H */
--- /dev/null
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ * Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <plat/mfp.h>
+
+#define MFPR_SIZE (PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL (0x1 << 15)
+#define MFPR_PULLUP_EN (0x1 << 14)
+#define MFPR_PULLDOWN_EN (0x1 << 13)
+#define MFPR_SLEEP_SEL (0x1 << 9)
+#define MFPR_SLEEP_OE_N (0x1 << 7)
+#define MFPR_EDGE_CLEAR (0x1 << 6)
+#define MFPR_EDGE_FALL_EN (0x1 << 5)
+#define MFPR_EDGE_RISE_EN (0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x) ((x) << 8)
+#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE (0)
+#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
+ * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
+ *
+ * Input 0 X(0) X(0) X(0) 0
+ * Drive 0 0 0 0 X(1) 0
+ * Drive 1 0 1 X(1) 0 0
+ * Pull hi (1) 1 X(1) 1 0 0
+ * Pull lo (0) 1 X(0) 0 1 0
+ * Z (float) 1 X(0) 0 0 0
+ */
+#define MFPR_LPM_INPUT (0)
+#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK (0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior, the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition pull_sel pullup_en pulldown_en
+ * MFPR_PULL_NONE 0 0 0
+ * MFPR_PULL_LOW 1 0 1
+ * MFPR_PULL_HIGH 1 1 0
+ * MFPR_PULL_BOTH 1 1 1
+ */
+#define MFPR_PULL_NONE (0)
+#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+ unsigned long config; /* -1 for not configured */
+ unsigned long mfpr_off; /* MFPRxx Register offset */
+ unsigned long mfpr_run; /* Run-Mode Register Value */
+ unsigned long mfpr_lpm; /* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+ MFPR_LPM_INPUT,
+ MFPR_LPM_DRIVE_LOW,
+ MFPR_LPM_DRIVE_HIGH,
+ MFPR_LPM_PULL_LOW,
+ MFPR_LPM_PULL_HIGH,
+ MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+ MFPR_PULL_NONE,
+ MFPR_PULL_LOW,
+ MFPR_PULL_HIGH,
+ MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+ MFPR_EDGE_NONE,
+ MFPR_EDGE_RISE,
+ MFPR_EDGE_FALL,
+ MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off) \
+ __raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val) \
+ __raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p) ((p)->config != -1)
+
+/*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+ if (mfp_configured(p))
+ mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+ if (mfp_configured(p)) {
+ unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+ if (mfpr_clr != p->mfpr_run)
+ mfpr_writel(p->mfpr_off, mfpr_clr);
+ if (p->mfpr_lpm != mfpr_clr)
+ mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+ }
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (i = 0; i < num; i++, mfp_cfgs++) {
+ unsigned long tmp, c = *mfp_cfgs;
+ struct mfp_pin *p;
+ int pin, af, drv, lpm, edge, pull;
+
+ pin = MFP_PIN(c);
+ BUG_ON(pin >= MFP_PIN_MAX);
+ p = &mfp_table[pin];
+
+ af = MFP_AF(c);
+ drv = MFP_DS(c);
+ lpm = MFP_LPM_STATE(c);
+ edge = MFP_LPM_EDGE(c);
+ pull = MFP_PULL(c);
+
+ /* run-mode pull settings will conflict with MFPR bits of
+ * low power mode state, calculate mfpr_run and mfpr_lpm
+ * individually if pull != MFP_PULL_NONE
+ */
+ tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+ if (likely(pull == MFP_PULL_NONE)) {
+ p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_lpm = p->mfpr_run;
+ } else {
+ p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_run = tmp | mfpr_pull[pull];
+ }
+
+ p->config = c; __mfp_config_run(p);
+ }
+
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+ unsigned long val, flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ val = mfpr_readl(mfp_table[mfp].mfpr_off);
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+ return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ mfpr_writel(mfp_table[mfp].mfpr_off, val);
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(unsigned long mfpr_base)
+{
+ int i;
+
+ /* initialize the table with default - unconfigured */
+ for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+ mfp_table[i].config = -1;
+
+ mfpr_mmio_base = (void __iomem *)mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+ struct mfp_addr_map *p;
+ unsigned long offset, flags;
+ int i;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (p = map; p->start != MFP_PIN_INVALID; p++) {
+ offset = p->offset;
+ i = p->start;
+
+ do {
+ mfp_table[i].mfpr_off = offset;
+ mfp_table[i].mfpr_run = 0;
+ mfp_table[i].mfpr_lpm = 0;
+ offset += 4; i++;
+ } while ((i <= p->end) && (p->end != -1));
+ }
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+ struct mfp_pin *p = &mfp_table[0];
+ int pin;
+
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+ __mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+ struct mfp_pin *p = &mfp_table[0];
+ int pin;
+
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+ __mfp_config_run(p);
+}
obj-y += gpio.o
obj-y += gpio-config.o
+# PM support
+
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
+
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
--- /dev/null
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c_pm_init(void);
+
+#else
+
+static inline int s3c_pm_init(void)
+{
+ return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int s3c_cpu_save(unsigned long *saveblk);
+extern void s3c_cpu_resume(void);
+
+extern void s3c2410_cpu_suspend(void);
+
+extern unsigned long s3c_sleep_save_phys;
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+ void __iomem *reg;
+ unsigned long val;
+};
+
+#define SAVE_ITEM(x) \
+ { .reg = (x) }
+
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+ u32 ulcon;
+ u32 ucon;
+ u32 ufcon;
+ u32 umcon;
+ u32 ubrdiv;
+};
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c_irqext_wake NULL
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume NULL
+#endif
+
+/* PM debug functions */
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+#else
+#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
+
+/* suspend memory checking */
+
+#ifdef CONFIG_S3C2410_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while(0)
+#define s3c_pm_check_restore() do { } while(0)
+#define s3c_pm_check_cleanup() do { } while(0)
+#define s3c_pm_check_store() do { } while(0)
+#endif
+
+/**
+ * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
+ *
+ * Setup all the necessary GPIO pins for waking the system on external
+ * interrupt.
+ */
+extern void s3c_pm_configure_extint(void);
+
+/**
+ * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ *
+ * Restore the state of the GPIO pins after sleep, which may involve ensuring
+ * that we do not glitch the state of the pins from that the bootloader's
+ * resume code has done.
+*/
+extern void s3c_pm_restore_gpios(void);
+
+/**
+ * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ *
+ * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ */
+extern void s3c_pm_save_gpios(void);
+
+/**
+ * s3c_pm_cb_flushcache - callback for assembly code
+ *
+ * Callback to issue flush_cache_all() as this call is
+ * not a directly callable object.
+ */
+extern void s3c_pm_cb_flushcache(void);
+
+extern void s3c_pm_save_core(void);
+extern void s3c_pm_restore_core(void);
{
}
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+#define __raw_writel(d, ad) \
+ do { \
+ *((volatile unsigned int __force *)(ad)) = (d); \
+ } while (0)
/* CONFIG_S3C_BOOT_WATCHDOG
*
--- /dev/null
+/* linux/arch/arm/plat-s3c/pm-check.c
+ * originally in linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+
+#include <plat/pm.h>
+
+#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#endif
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size; /* size needed for the crc block */
+static u32 *crcs; /* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c_pm_run_res
+ *
+ * go through the given resource list, and look for system ram
+*/
+
+static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+ while (ptr != NULL) {
+ if (ptr->child != NULL)
+ s3c_pm_run_res(ptr->child, fn, arg);
+
+ if ((ptr->flags & IORESOURCE_MEM) &&
+ strcmp(ptr->name, "System RAM") == 0) {
+ S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
+ (unsigned long)ptr->start,
+ (unsigned long)ptr->end);
+ arg = (fn)(ptr, arg);
+ }
+
+ ptr = ptr->sibling;
+ }
+}
+
+static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+ s3c_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c_pm_countram(struct resource *res, u32 *val)
+{
+ u32 size = (u32)(res->end - res->start)+1;
+
+ size += CHECK_CHUNKSIZE-1;
+ size /= CHECK_CHUNKSIZE;
+
+ S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
+ (unsigned long)res->start, (unsigned long)res->end, size);
+
+ *val += size * sizeof(u32);
+ return val;
+}
+
+/* s3c_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+void s3c_pm_check_prepare(void)
+{
+ crc_size = 0;
+
+ s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
+
+ S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
+
+ crcs = kmalloc(crc_size+4, GFP_KERNEL);
+ if (crcs == NULL)
+ printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
+{
+ unsigned long addr, left;
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ *val = crc32_le(~0, phys_to_virt(addr), left);
+ val++;
+ }
+
+ return val;
+}
+
+/* s3c_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+void s3c_pm_check_store(void)
+{
+ if (crcs != NULL)
+ s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contains the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+ if ((what+whatsz) < ptr)
+ return 0;
+
+ if (what > (ptr+size))
+ return 0;
+
+ return 1;
+}
+
+/**
+ * s3c_pm_runcheck() - helper to check a resource on restore.
+ * @res: The resource to check
+ * @vak: Pointer to list of CRC32 values to check.
+ *
+ * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
+ * function runs the given memory resource checking it against the stored
+ * CRC to ensure that memory is restored. The function tries to skip as
+ * many of the areas used during the suspend process.
+ */
+static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
+{
+ void *save_at = phys_to_virt(s3c_sleep_save_phys);
+ unsigned long addr;
+ unsigned long left;
+ void *stkpage;
+ void *ptr;
+ u32 calc;
+
+ stkpage = (void *)((u32)&calc & ~PAGE_MASK);
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ ptr = phys_to_virt(addr);
+
+ if (in_region(ptr, left, stkpage, 4096)) {
+ S3C_PMDBG("skipping %08lx, has stack in\n", addr);
+ goto skip_check;
+ }
+
+ if (in_region(ptr, left, crcs, crc_size)) {
+ S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
+ goto skip_check;
+ }
+
+ if (in_region(ptr, left, save_at, 32*4 )) {
+ S3C_PMDBG("skipping %08lx, has save block in\n", addr);
+ goto skip_check;
+ }
+
+ /* calculate and check the checksum */
+
+ calc = crc32_le(~0, ptr, left);
+ if (calc != *val) {
+ printk(KERN_ERR "Restore CRC error at "
+ "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+ S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+ addr, calc, *val);
+ }
+
+ skip_check:
+ val++;
+ }
+
+ return val;
+}
+
+/**
+ * s3c_pm_check_restore() - memory check called on resume
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+void s3c_pm_check_restore(void)
+{
+ if (crcs != NULL)
+ s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
+}
+
+/**
+ * s3c_pm_check_cleanup() - free memory resources
+ *
+ * Free the resources that where allocated by the suspend
+ * memory check code. We do this separately from the
+ * s3c_pm_check_restore() function as we cannot call any
+ * functions that might sleep during that resume.
+ */
+void s3c_pm_check_cleanup(void)
+{
+ kfree(crcs);
+ crcs = NULL;
+}
+
--- /dev/null
+/* linux/arch/arm/plat-s3c/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2004,2006,2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C common power management (suspend to ram) support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
+#include <asm/irq.h>
+
+#include <plat/pm.h>
+#include <plat/pm-core.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+/* Debug code:
+ *
+ * This code supports debug output to the low level UARTs for use on
+ * resume before the console layer is available.
+*/
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+extern void printascii(const char *);
+
+void s3c_pm_dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vsprintf(buff, fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+static inline void s3c_pm_debug_init(void)
+{
+ /* restart uart clocks so we can use them to output */
+ s3c_pm_debug_init_uart();
+}
+
+#else
+#define s3c_pm_debug_init() do { } while(0)
+
+#endif /* CONFIG_S3C2410_PM_DEBUG */
+
+/* Save the UART configurations if we are configured for debug. */
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+
+struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
+{
+ void __iomem *regs = S3C_VA_UARTx(uart);
+
+ save->ulcon = __raw_readl(regs + S3C2410_ULCON);
+ save->ucon = __raw_readl(regs + S3C2410_UCON);
+ save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+ save->umcon = __raw_readl(regs + S3C2410_UMCON);
+ save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+}
+
+static void s3c_pm_save_uarts(void)
+{
+ struct pm_uart_save *save = uart_save;
+ unsigned int uart;
+
+ for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+ s3c_pm_save_uart(uart, save);
+}
+
+static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
+{
+ void __iomem *regs = S3C_VA_UARTx(uart);
+
+ __raw_writel(save->ulcon, regs + S3C2410_ULCON);
+ __raw_writel(save->ucon, regs + S3C2410_UCON);
+ __raw_writel(save->ufcon, regs + S3C2410_UFCON);
+ __raw_writel(save->umcon, regs + S3C2410_UMCON);
+ __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+}
+
+static void s3c_pm_restore_uarts(void)
+{
+ struct pm_uart_save *save = uart_save;
+ unsigned int uart;
+
+ for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+ s3c_pm_restore_uart(uart, save);
+}
+#else
+static void s3c_pm_save_uarts(void) { }
+static void s3c_pm_restore_uarts(void) { }
+#endif
+
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask = 0xffffffffL;
+unsigned long s3c_irqwake_eintmask = 0xffffffffL;
+
+int s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
+
+ if (!(s3c_irqwake_eintallow & bit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_eintmask |= bit;
+ else
+ s3c_irqwake_eintmask &= ~bit;
+
+ return 0;
+}
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ ptr->val = __raw_readl(ptr->reg);
+ S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+ }
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+ ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+ __raw_writel(ptr->val, ptr->reg);
+ }
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++)
+ __raw_writel(ptr->val, ptr->reg);
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+ unsigned long mask)
+{
+ int i;
+
+ which &= ~mask;
+
+ for (i = 0; i <= 31; i++) {
+ if (which & (1L<<i)) {
+ S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+ }
+ }
+}
+
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+ static unsigned long regs_save[16];
+
+ /* ensure the debug is initialised (if enabled) */
+
+ s3c_pm_debug_init();
+
+ S3C_PMDBG("%s(%d)\n", __func__, state);
+
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+ return -EINVAL;
+ }
+
+ /* check if we have anything to wake-up with... bad things seem
+ * to happen if you suspend with no wakeup (system will often
+ * require a full power-cycle)
+ */
+
+ if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+ !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+ printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+ printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+ return -EINVAL;
+ }
+
+ /* store the physical address of the register recovery block */
+
+ s3c_sleep_save_phys = virt_to_phys(regs_save);
+
+ S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
+
+ /* save all necessary core registers not covered by the drivers */
+
+ s3c_pm_save_gpios();
+ s3c_pm_save_uarts();
+ s3c_pm_save_core();
+
+ /* set the irq configuration for wake */
+
+ s3c_pm_configure_extint();
+
+ S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+ s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+ s3c_pm_arch_prepare_irqs();
+
+ /* call cpu specific preparation */
+
+ pm_cpu_prep();
+
+ /* flush cache back to ram */
+
+ flush_cache_all();
+
+ s3c_pm_check_store();
+
+ /* send the cpu to sleep... */
+
+ s3c_pm_arch_stop_clocks();
+
+ /* s3c_cpu_save will also act as our return point from when
+ * we resume as it saves its own register state and restores it
+ * during the resume. */
+
+ s3c_cpu_save(regs_save);
+
+ /* restore the cpu state using the kernel's cpu init code. */
+
+ cpu_init();
+
+ /* restore the system state */
+
+ s3c_pm_restore_core();
+ s3c_pm_restore_uarts();
+ s3c_pm_restore_gpios();
+
+ s3c_pm_debug_init();
+
+ /* check what irq (if any) restored the system */
+
+ s3c_pm_arch_show_resume_irqs();
+
+ S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+ s3c_pm_check_restore();
+
+ /* ok, let's return from sleep */
+
+ S3C_PMDBG("S3C PM Resume (post-restore)\n");
+ return 0;
+}
+
+/* callback from assembly code */
+void s3c_pm_cb_flushcache(void)
+{
+ flush_cache_all();
+}
+
+static int s3c_pm_prepare(void)
+{
+ /* prepare check area if configured */
+
+ s3c_pm_check_prepare();
+ return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+ s3c_pm_check_cleanup();
+}
+
+static struct platform_suspend_ops s3c_pm_ops = {
+ .enter = s3c_pm_enter,
+ .prepare = s3c_pm_prepare,
+ .finish = s3c_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+/* s3c_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c_pm_init(void)
+{
+ printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+ suspend_set_ops(&s3c_pm_ops);
+ return 0;
+}
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
- s3c2410_pm_init();
+ s3c_pm_init();
}
* with the caches enabled. It seems at least the S3C2440 has a problem
* resetting if there is bus activity interrupted by the reset.
*/
-static void s3c24xx_pm_restart(char mode)
+static void s3c24xx_pm_restart(char mode, const char *cmd)
{
if (mode != 's') {
unsigned long flags;
__cpuc_flush_kern_all();
__cpuc_flush_user_all();
- arch_reset(mode);
+ arch_reset(mode, cmd);
local_irq_restore(flags);
}
/* fallback, or unhandled */
- arm_machine_restart(mode);
+ arm_machine_restart(mode, cmd);
}
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
* published by the Free Software Foundation.
*/
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
#define irqdbf(x...)
#define irqdbf2(x...)
#define S3C24XX_SZ_UART SZ_1M
#define S3C_UART_OFFSET (0x4000)
+#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
/* Timers */
#define S3C24XX_VA_TIMER S3C_VA_TIMER
#define S3C2410_PA_TIMER (0x51000000)
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+ /* re-start uart clocks */
+ tmp |= S3C2410_CLKCON_UART0;
+ tmp |= S3C2410_CLKCON_UART1;
+ tmp |= S3C2410_CLKCON_UART2;
+
+ __raw_writel(tmp, S3C2410_CLKCON);
+ udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+ __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+ /* ack any outstanding external interrupts before we go to sleep */
+
+ __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+ __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+ __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+ __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
+}
+
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+ unsigned long mask);
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+ S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+ __raw_readl(S3C2410_SRCPND),
+ __raw_readl(S3C2410_EINTPEND));
+
+ s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+ s3c_irqwake_intmask);
+
+ s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+ s3c_irqwake_eintmask);
+}
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c2410_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#ifdef CONFIG_PM
-
-extern __init int s3c2410_pm_init(void);
-
-#else
-
-static inline int s3c2410_pm_init(void)
-{
- return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-/* from sleep.S */
-
-extern int s3c2410_cpu_save(unsigned long *saveblk);
-extern void s3c2410_cpu_suspend(void);
-extern void s3c2410_cpu_resume(void);
-
-extern unsigned long s3c2410_sleep_save_phys;
-
-/* sleep save info */
-
-struct sleep_save {
- void __iomem *reg;
- unsigned long val;
-};
-
-#define SAVE_ITEM(x) \
- { .reg = (x) }
-
-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume NULL
-#endif
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/irq-om.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C24XX - IRQ PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
+
+int s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+
+ if (!(s3c_irqwake_intallow & irqbit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_intmask |= irqbit;
+ else
+ s3c_irqwake_intmask &= ~irqbit;
+
+ return 0;
+}
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C2410_INTMSK),
+ SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+ save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+ return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+ return 0;
+}
/* linux/arch/arm/plat-s3c24xx/irq.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Changelog:
- *
- * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk>
- * Fixed compile warnings
- *
- * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn>
- * Fixed s3c_extirq_type
- *
- * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
- * Addition of ADC/TC demux
- *
- * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de>
- * Fix for set_irq_type() on low EINT numbers
- *
- * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
- * Tidy up KF's patch and sort out new release
- *
- * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
- * Add support for power management controls
- *
- * 04-Nov-2004 Ben Dooks
- * Fix standard IRQ wake for EINT0..4 and RTC
- *
- * 22-Feb-2005 Ben Dooks
- * Fixed edge-triggering on ADC IRQ
- *
- * 28-Jun-2005 Ben Dooks
- * Mark IRQ_LCD valid
- *
- * 25-Jul-2005 Ben Dooks
- * Split the S3C2440 IRQ code to separate file
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-
#include <asm/mach/irq.h>
#include <plat/regs-irqtype.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/irq.h>
-/* wakeup irq control */
-
-#ifdef CONFIG_PM
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask = 0xffffffffL;
-unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask = 0xffffffffL;
-
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
-{
- unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
-
- if (!(s3c_irqwake_intallow & irqbit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_intmask |= irqbit;
- else
- s3c_irqwake_intmask &= ~irqbit;
-
- return 0;
-}
-
-static int
-s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
- unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
- if (!(s3c_irqwake_eintallow & bit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_eintmask |= bit;
- else
- s3c_irqwake_eintmask &= ~bit;
-
- return 0;
-}
-
-#else
-#define s3c_irqext_wake NULL
-#define s3c_irq_wake NULL
-#endif
-
-
static void
s3c_irq_mask(unsigned int irqno)
{
}
}
-#ifdef CONFIG_PM
-
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C2410_INTMSK),
- SAVE_ITEM(S3C2410_INTSUBMSK),
-};
-
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
- s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
- save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
- return 0;
-}
-
-int s3c24xx_irq_resume(struct sys_device *dev)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
- s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
- __raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
- return 0;
-}
-
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume NULL
-#endif
-
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
__raw_writel(gstatus4, S3C2410_GSTATUS4);
- return s3c2410_pm_init();
+ return s3c_pm_init();
}
arch_initcall(pm_simtec_init);
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/interrupt.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/io.h>
-#include <asm/cacheflush.h>
-#include <mach/hardware.h>
-
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <plat/pm.h>
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
#define PFX "s3c24xx-pm: "
static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
-#ifdef CONFIG_S3C2410_PM_DEBUG
-
-#define SAVE_UART(va) \
- SAVE_ITEM((va) + S3C2410_ULCON), \
- SAVE_ITEM((va) + S3C2410_UCON), \
- SAVE_ITEM((va) + S3C2410_UFCON), \
- SAVE_ITEM((va) + S3C2410_UMCON), \
- SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
- SAVE_UART(S3C24XX_VA_UART0),
- SAVE_UART(S3C24XX_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
- SAVE_UART(S3C24XX_VA_UART2),
-#endif
-};
-
-/* debug
- *
- * we send the debug to printascii() to allow it to be seen if the
- * system never wakes up from the sleep
-*/
-
-extern void printascii(const char *);
-
-void pm_dbg(const char *fmt, ...)
-{
- va_list va;
- char buff[256];
-
- va_start(va, fmt);
- vsprintf(buff, fmt, va);
- va_end(va);
-
- printascii(buff);
-}
-
-static void s3c2410_pm_debug_init(void)
-{
- unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
- /* re-start uart clocks */
- tmp |= S3C2410_CLKCON_UART0;
- tmp |= S3C2410_CLKCON_UART1;
- tmp |= S3C2410_CLKCON_UART2;
-
- __raw_writel(tmp, S3C2410_CLKCON);
- udelay(10);
-}
-
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-
-#define s3c2410_pm_debug_init() do { } while(0)
-
-static struct sleep_save uart_save[] = {};
-#endif
-
-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size; /* size needed for the crc block */
-static u32 *crcs; /* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c2410_pm_run_res
- *
- * go thorugh the given resource list, and look for system ram
-*/
-
-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
- while (ptr != NULL) {
- if (ptr->child != NULL)
- s3c2410_pm_run_res(ptr->child, fn, arg);
-
- if ((ptr->flags & IORESOURCE_MEM) &&
- strcmp(ptr->name, "System RAM") == 0) {
- DBG("Found system RAM at %08lx..%08lx\n",
- ptr->start, ptr->end);
- arg = (fn)(ptr, arg);
- }
-
- ptr = ptr->sibling;
- }
-}
-
-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
- s3c2410_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
-{
- u32 size = (u32)(res->end - res->start)+1;
-
- size += CHECK_CHUNKSIZE-1;
- size /= CHECK_CHUNKSIZE;
-
- DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
-
- *val += size * sizeof(u32);
- return val;
-}
-
-/* s3c2410_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-static void s3c2410_pm_check_prepare(void)
-{
- crc_size = 0;
-
- s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
-
- DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
-
- crcs = kmalloc(crc_size+4, GFP_KERNEL);
- if (crcs == NULL)
- printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
-{
- unsigned long addr, left;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
-
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- *val = crc32_le(~0, phys_to_virt(addr), left);
- val++;
- }
-
- return val;
-}
-
-/* s3c2410_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-static void s3c2410_pm_check_store(void)
-{
- if (crcs != NULL)
- s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contatins the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
- if ((what+whatsz) < ptr)
- return 0;
-
- if (what > (ptr+size))
- return 0;
-
- return 1;
-}
-
-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
-{
- void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
- unsigned long addr;
- unsigned long left;
- void *ptr;
- u32 calc;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
-
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- ptr = phys_to_virt(addr);
-
- if (in_region(ptr, left, crcs, crc_size)) {
- DBG("skipping %08lx, has crc block in\n", addr);
- goto skip_check;
- }
-
- if (in_region(ptr, left, save_at, 32*4 )) {
- DBG("skipping %08lx, has save block in\n", addr);
- goto skip_check;
- }
-
- /* calculate and check the checksum */
-
- calc = crc32_le(~0, ptr, left);
- if (calc != *val) {
- printk(KERN_ERR PFX "Restore CRC error at "
- "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
- DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
- addr, calc, *val);
- }
-
- skip_check:
- val++;
- }
-
- return val;
-}
-
-/* s3c2410_pm_check_restore
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-
-static void s3c2410_pm_check_restore(void)
-{
- if (crcs != NULL) {
- s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
- kfree(crcs);
- crcs = NULL;
- }
-}
-
-#else
-
-#define s3c2410_pm_check_prepare() do { } while(0)
-#define s3c2410_pm_check_restore() do { } while(0)
-#define s3c2410_pm_check_store() do { } while(0)
-#endif
-
-/* helper functions to save and restore register state */
-
-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- ptr->val = __raw_readl(ptr->reg);
- DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
- }
-}
-
-/* s3c2410_pm_do_restore
- *
- * restore the system from the given list of saved registers
- *
- * Note, we do not use DBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
- ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-
-/* s3c2410_pm_do_restore_core
- *
- * similar to s3c2410_pm_do_restore_core
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-
-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
-{
- int i;
-
- which &= ~mask;
-
- for (i = 0; i <= 31; i++) {
- if ((which) & (1L<<i)) {
- DBG("IRQ %d asserted at resume\n", start+i);
- }
- }
-}
-
-/* s3c2410_pm_check_resume_pin
+/* s3c_pm_check_resume_pin
*
* check to see if the pin is configured correctly for sleep mode, and
* make any necessary adjustments if it is not
*/
-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
{
unsigned long irqstate;
unsigned long pinstate;
if (!irqstate) {
if (pinstate == S3C2410_GPIO_IRQ)
- DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+ S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
} else {
if (pinstate == S3C2410_GPIO_IRQ) {
- DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+ S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
}
}
}
-/* s3c2410_pm_configure_extint
+/* s3c_pm_configure_extint
*
* configure all external interrupt pins
*/
-static void s3c2410_pm_configure_extint(void)
+void s3c_pm_configure_extint(void)
{
int pin;
*/
for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
- s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+ s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
}
for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
- s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+ s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
}
}
#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
-/* s3c2410_pm_save_gpios()
+/* s3c_pm_save_gpios()
*
* Save the state of the GPIOs
*/
-static void s3c2410_pm_save_gpios(void)
+void s3c_pm_save_gpios(void)
{
struct gpio_sleep *gps = gpio_save;
unsigned int gpio;
return con == 1;
}
-/* s3c2410_pm_restore_gpio()
+/**
+ * s3c2410_pm_restore_gpio() - restore the given GPIO bank
+ * @index: The number of the GPIO bank being resumed.
+ * @gps: The sleep confgiuration for the bank.
*
* Restore one of the GPIO banks that was saved during suspend. This is
* not as simple as once thought, due to the possibility of glitches
__raw_writel(gps->gpup, base + OFFS_UP);
}
- DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
- index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+ S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+ index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
* Restore the state of the GPIOs
*/
-static void s3c2410_pm_restore_gpios(void)
+void s3c_pm_restore_gpios(void)
{
struct gpio_sleep *gps = gpio_save;
int gpio;
}
}
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
+void s3c_pm_restore_core(void)
{
- unsigned long regs_save[16];
-
- /* ensure the debug is initialised (if enabled) */
-
- s3c2410_pm_debug_init();
-
- DBG("s3c2410_pm_enter(%d)\n", state);
-
- if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
- printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
- return -EINVAL;
- }
-
- /* check if we have anything to wake-up with... bad things seem
- * to happen if you suspend with no wakeup (system will often
- * require a full power-cycle)
- */
-
- if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
- !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
- printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
- printk(KERN_ERR PFX "Aborting sleep\n");
- return -EINVAL;
- }
-
- /* prepare check area if configured */
-
- s3c2410_pm_check_prepare();
-
- /* store the physical address of the register recovery block */
-
- s3c2410_sleep_save_phys = virt_to_phys(regs_save);
-
- DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
-
- /* save all necessary core registers not covered by the drivers */
-
- s3c2410_pm_save_gpios();
- s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
- s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
- /* set the irq configuration for wake */
-
- s3c2410_pm_configure_extint();
-
- DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
- s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
- __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
- __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
- /* ack any outstanding external interrupts before we go to sleep */
-
- __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
- __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
- __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
- /* call cpu specific preparation */
-
- pm_cpu_prep();
-
- /* flush cache back to ram */
-
- flush_cache_all();
-
- s3c2410_pm_check_store();
-
- /* send the cpu to sleep... */
-
- __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
-
- /* s3c2410_cpu_save will also act as our return point from when
- * we resume as it saves its own register state, so use the return
- * code to differentiate return from save and return from sleep */
-
- if (s3c2410_cpu_save(regs_save) == 0) {
- flush_cache_all();
- pm_cpu_sleep();
- }
-
- /* restore the cpu state */
-
- cpu_init();
-
- /* restore the system state */
-
- s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
- s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
- s3c2410_pm_restore_gpios();
-
- s3c2410_pm_debug_init();
-
- /* check what irq (if any) restored the system */
-
- DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
- __raw_readl(S3C2410_SRCPND),
- __raw_readl(S3C2410_EINTPEND));
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
- s3c_irqwake_intmask);
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
- s3c_irqwake_eintmask);
-
- DBG("post sleep, preparing to return\n");
-
- s3c2410_pm_check_restore();
-
- /* ok, let's return from sleep */
-
- DBG("S3C2410 PM Resume (post-restore)\n");
- return 0;
+ s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+ s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
}
-static struct platform_suspend_ops s3c2410_pm_ops = {
- .enter = s3c2410_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-
-/* s3c2410_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c2410_pm_init(void)
+void s3c_pm_save_core(void)
{
- printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
-
- suspend_set_ops(&s3c2410_pm_ops);
- return 0;
+ s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+ s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
}
+
static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
{
- s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
return 0;
}
static int s3c244x_resume(struct sys_device *dev)
{
- s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
return 0;
}
.text
- /* s3c2410_cpu_save
- *
- * save enough of the CPU state to allow us to re-start
- * pm.c code. as we store items like the sp/lr, we will
- * end up returning from this function when the cpu resumes
- * so the return value is set to mark this.
- *
- * This arangement means we avoid having to flush the cache
- * from this code.
+ /* s3c_cpu_save
*
* entry:
- * r0 = pointer to save block
- *
- * exit:
- * r0 = 0 => we stored everything
- * 1 => resumed from sleep
+ * r0 = save address (virtual addr of s3c_sleep_save_phys)
*/
-ENTRY(s3c2410_cpu_save)
+ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
@@ store co-processor registers
stmia r0, { r4 - r13 }
- mov r0, #0
- ldmfd sp, { r4 - r12, pc }
+ @@ write our state back to RAM
+ bl s3c_pm_cb_flushcache
+ @@ jump to final code to send system to sleep
+ ldr r0, =pm_cpu_sleep
+ @@ldr pc, [ r0 ]
+ ldr r0, [ r0 ]
+ mov pc, r0
+
@@ return to the caller, after having the MMU
@@ turned on, this restores the last bits from the
@@ stack
resume_with_mmu:
- mov r0, #1
ldmfd sp!, { r4 - r12, pc }
.ltorg
@@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c2410_sleep_save_phys needs to be
+ @@ happen to be code... the s3c_sleep_save_phys needs to be
@@ accessed by the resume code before it can restore the MMU.
@@ This means that the variable has to be close enough for the
@@ code to read it... since the .text segment needs to be RO,
.data
- .global s3c2410_sleep_save_phys
-s3c2410_sleep_save_phys:
+ .global s3c_sleep_save_phys
+s3c_sleep_save_phys:
.word 0
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
- * s3c2410_cpu_resume entry.
+ * s3c_cpu_resume entry.
*/
.word 0x2bedf00d
- /* s3c2410_cpu_resume
+ /* s3c_cpu_resume
*
* resume code entry for bootloader to call
*
* must not write to the code segment (code is read-only)
*/
-ENTRY(s3c2410_cpu_resume)
+ENTRY(s3c_cpu_resume)
mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
msr cpsr_c, r0
mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
- ldr r0, s3c2410_sleep_save_phys @ address of restore block
+ ldr r0, s3c_sleep_save_phys @ address of restore block
ldmia r0, { r4 - r13 }
mcr p15, 0, r4, c13, c0, 0 @ PID
.pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
.length = SZ_4K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_MODEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
},
};
--- /dev/null
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO memory port register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+
+#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0)
+#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4)
+
+#define S3C64XX_MEM0CONSLP0 S3C64XX_GPIOREG(0x1C0)
+#define S3C64XX_MEM0CONSLP1 S3C64XX_GPIOREG(0x1C4)
+#define S3C64XX_MEM1CONSLP S3C64XX_GPIOREG(0x1C8)
+
+#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0)
+#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
+
/* Base addresses for each of the banks */
-#define S3C64XX_GPA_BASE (S3C64XX_VA_GPIO + 0x0000)
-#define S3C64XX_GPB_BASE (S3C64XX_VA_GPIO + 0x0020)
-#define S3C64XX_GPC_BASE (S3C64XX_VA_GPIO + 0x0040)
-#define S3C64XX_GPD_BASE (S3C64XX_VA_GPIO + 0x0060)
-#define S3C64XX_GPE_BASE (S3C64XX_VA_GPIO + 0x0080)
-#define S3C64XX_GPF_BASE (S3C64XX_VA_GPIO + 0x00A0)
-#define S3C64XX_GPG_BASE (S3C64XX_VA_GPIO + 0x00C0)
-#define S3C64XX_GPH_BASE (S3C64XX_VA_GPIO + 0x00E0)
-#define S3C64XX_GPI_BASE (S3C64XX_VA_GPIO + 0x0100)
-#define S3C64XX_GPJ_BASE (S3C64XX_VA_GPIO + 0x0120)
-#define S3C64XX_GPK_BASE (S3C64XX_VA_GPIO + 0x0800)
-#define S3C64XX_GPL_BASE (S3C64XX_VA_GPIO + 0x0810)
-#define S3C64XX_GPM_BASE (S3C64XX_VA_GPIO + 0x0820)
-#define S3C64XX_GPN_BASE (S3C64XX_VA_GPIO + 0x0830)
-#define S3C64XX_GPO_BASE (S3C64XX_VA_GPIO + 0x0140)
-#define S3C64XX_GPP_BASE (S3C64XX_VA_GPIO + 0x0160)
-#define S3C64XX_GPQ_BASE (S3C64XX_VA_GPIO + 0x0180)
+#define S3C64XX_GPIOREG(reg) (S3C64XX_VA_GPIO + (reg))
+
+#define S3C64XX_GPA_BASE S3C64XX_GPIOREG(0x0000)
+#define S3C64XX_GPB_BASE S3C64XX_GPIOREG(0x0020)
+#define S3C64XX_GPC_BASE S3C64XX_GPIOREG(0x0040)
+#define S3C64XX_GPD_BASE S3C64XX_GPIOREG(0x0060)
+#define S3C64XX_GPE_BASE S3C64XX_GPIOREG(0x0080)
+#define S3C64XX_GPF_BASE S3C64XX_GPIOREG(0x00A0)
+#define S3C64XX_GPG_BASE S3C64XX_GPIOREG(0x00C0)
+#define S3C64XX_GPH_BASE S3C64XX_GPIOREG(0x00E0)
+#define S3C64XX_GPI_BASE S3C64XX_GPIOREG(0x0100)
+#define S3C64XX_GPJ_BASE S3C64XX_GPIOREG(0x0120)
+#define S3C64XX_GPK_BASE S3C64XX_GPIOREG(0x0800)
+#define S3C64XX_GPL_BASE S3C64XX_GPIOREG(0x0810)
+#define S3C64XX_GPM_BASE S3C64XX_GPIOREG(0x0820)
+#define S3C64XX_GPN_BASE S3C64XX_GPIOREG(0x0830)
+#define S3C64XX_GPO_BASE S3C64XX_GPIOREG(0x0140)
+#define S3C64XX_GPP_BASE S3C64XX_GPIOREG(0x0160)
+#define S3C64XX_GPQ_BASE S3C64XX_GPIOREG(0x0180)
+
+/* SPCON */
+
+#define S3C64XX_SPCON S3C64XX_GPIOREG(0x1A0)
+
+#define S3C64XX_SPCON_DRVCON_CAM_MASK (0x3 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_SHIFT (30)
+#define S3C64XX_SPCON_DRVCON_CAM_2mA (0x0 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_4mA (0x1 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_7mA (0x2 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_9mA (0x3 << 30)
+
+#define S3C64XX_SPCON_DRVCON_HSSPI_MASK (0x3 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT (28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_2mA (0x0 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_4mA (0x1 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_7mA (0x2 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_9mA (0x3 << 28)
+
+#define S3C64XX_SPCON_DRVCON_HSMMC_MASK (0x3 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT (26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_2mA (0x0 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_4mA (0x1 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_7mA (0x2 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_9mA (0x3 << 26)
+
+#define S3C64XX_SPCON_DRVCON_LCD_MASK (0x3 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_SHIFT (24)
+#define S3C64XX_SPCON_DRVCON_LCD_2mA (0x0 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_4mA (0x1 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_7mA (0x2 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_9mA (0x3 << 24)
+
+#define S3C64XX_SPCON_DRVCON_MODEM_MASK (0x3 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT (22)
+#define S3C64XX_SPCON_DRVCON_MODEM_2mA (0x0 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_4mA (0x1 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_7mA (0x2 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_9mA (0x3 << 22)
+
+#define S3C64XX_SPCON_nRSTOUT_OEN (1 << 21)
+
+#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK (0x3 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT (18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA (0x0 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA (0x1 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA (0x2 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA (0x3 << 18)
+
+#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK (0x3 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT (16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED (0x0 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN (0x1 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_UP (0x2 << 16)
+
+#define S3C64XX_SPCON_MEM1_D_PUD1_MASK (0x3 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT (14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED (0x0 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN (0x1 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_UP (0x2 << 14)
+
+#define S3C64XX_SPCON_MEM1_D_PUD0_MASK (0x3 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT (12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED (0x0 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN (0x1 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_UP (0x2 << 12)
+
+#define S3C64XX_SPCON_MEM0_D_PUD_MASK (0x3 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT (8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED (0x0 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DOWN (0x1 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_UP (0x2 << 8)
+
+#define S3C64XX_SPCON_USBH_DMPD (1 << 7)
+#define S3C64XX_SPCON_USBH_DPPD (1 << 6)
+#define S3C64XX_SPCON_USBH_PUSW2 (1 << 5)
+#define S3C64XX_SPCON_USBH_PUSW1 (1 << 4)
+#define S3C64XX_SPCON_USBH_SUSPND (1 << 3)
+
+#define S3C64XX_SPCON_LCD_SEL_MASK (0x3 << 0)
+#define S3C64XX_SPCON_LCD_SEL_SHIFT (0)
+#define S3C64XX_SPCON_LCD_SEL_HOST (0x0 << 0)
+#define S3C64XX_SPCON_LCD_SEL_RGB (0x1 << 0)
+#define S3C64XX_SPCON_LCD_SEL_606_656 (0x2 << 0)
+
+
+/* External interrupt registers */
+
+#define S3C64XX_EINT12CON S3C64XX_GPIOREG(0x200)
+#define S3C64XX_EINT34CON S3C64XX_GPIOREG(0x204)
+#define S3C64XX_EINT56CON S3C64XX_GPIOREG(0x208)
+#define S3C64XX_EINT78CON S3C64XX_GPIOREG(0x20C)
+#define S3C64XX_EINT9CON S3C64XX_GPIOREG(0x210)
+
+#define S3C64XX_EINT12FLTCON S3C64XX_GPIOREG(0x220)
+#define S3C64XX_EINT34FLTCON S3C64XX_GPIOREG(0x224)
+#define S3C64XX_EINT56FLTCON S3C64XX_GPIOREG(0x228)
+#define S3C64XX_EINT78FLTCON S3C64XX_GPIOREG(0x22C)
+#define S3C64XX_EINT9FLTCON S3C64XX_GPIOREG(0x230)
+
+#define S3C64XX_EINT12MASK S3C64XX_GPIOREG(0x240)
+#define S3C64XX_EINT34MASK S3C64XX_GPIOREG(0x244)
+#define S3C64XX_EINT56MASK S3C64XX_GPIOREG(0x248)
+#define S3C64XX_EINT78MASK S3C64XX_GPIOREG(0x24C)
+#define S3C64XX_EINT9MASK S3C64XX_GPIOREG(0x250)
+
+#define S3C64XX_EINT12PEND S3C64XX_GPIOREG(0x260)
+#define S3C64XX_EINT34PEND S3C64XX_GPIOREG(0x264)
+#define S3C64XX_EINT56PEND S3C64XX_GPIOREG(0x268)
+#define S3C64XX_EINT78PEND S3C64XX_GPIOREG(0x26C)
+#define S3C64XX_EINT9PEND S3C64XX_GPIOREG(0x270)
+
+#define S3C64XX_PRIORITY S3C64XX_GPIOREG(0x280)
+#define S3C64XX_PRIORITY_ARB(x) (1 << (x))
+
+#define S3C64XX_SERVICE S3C64XX_GPIOREG(0x284)
+#define S3C64XX_SERVICEPEND S3C64XX_GPIOREG(0x288)
+
+#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924)
+
+/* GPIO sleep configuration */
+
+#define S3C64XX_SPCONSLP S3C64XX_GPIOREG(0x880)
+
+#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14)
+#define S3C64XX_SPCONSLP_CKE1INIT (1 << 5)
+
+#define S3C64XX_SPCONSLP_RSTOUT_MASK (0x3 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT0 (0x0 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT1 (0x1 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_HIZ (0x2 << 12)
+
+#define S3C64XX_SPCONSLP_KPCOL_MASK (0x3 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT0 (0x0 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT1 (0x1 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_INP (0x2 << 0)
+
+
+#define S3C64XX_SLPEN S3C64XX_GPIOREG(0x930)
+
+#define S3C64XX_SLPEN_USE_xSLP (1 << 0)
+#define S3C64XX_SLPEN_CFG_BYSLPEN (1 << 1)
#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
--- /dev/null
+/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - modem block registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_MODEM_H
+#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
+
+#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x))
+
+#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0)
+#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4)
+#define S3C64XX_MODEM_MIFCON S3C64XX_MODEMREG(0x8)
+#define S3C64XX_MODEM_MIFPCON S3C64XX_MODEMREG(0xC)
+#define S3C64XX_MODEM_INTCLR S3C64XX_MODEMREG(0x10)
+#define S3C64XX_MODEM_DMA_TXADDR S3C64XX_MODEMREG(0x14)
+#define S3C64XX_MODEM_DMA_RXADDR S3C64XX_MODEMREG(0x18)
+
+#define MIFPCON_INT2M_LEVEL (1 << 4)
+#define MIFPCON_LCD_BYPASS (1 << 3)
+
+#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
+#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
+
#define S3C64XX_OTHERS S3C_SYSREG(0x900)
#define S3C64XX_OTHERS_USBMASK (1 << 16)
--- /dev/null
+/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - syscon power and sleep control registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
+#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+
+#define S3C64XX_PWR_CFG S3C_SYSREG(0x804)
+
+#define S3C64XX_PWRCFG_OSC_OTG_DISABLE (1 << 17)
+#define S3C64XX_PWRCFG_MMC2_DISABLE (1 << 16)
+#define S3C64XX_PWRCFG_MMC1_DISABLE (1 << 15)
+#define S3C64XX_PWRCFG_MMC0_DISABLE (1 << 14)
+#define S3C64XX_PWRCFG_HSI_DISABLE (1 << 13)
+#define S3C64XX_PWRCFG_TS_DISABLE (1 << 12)
+#define S3C64XX_PWRCFG_RTC_TICK_DISABLE (1 << 11)
+#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE (1 << 10)
+#define S3C64XX_PWRCFG_MSM_DISABLE (1 << 9)
+#define S3C64XX_PWRCFG_KEY_DISABLE (1 << 8)
+#define S3C64XX_PWRCFG_BATF_DISABLE (1 << 7)
+
+#define S3C64XX_PWRCFG_CFG_WFI_MASK (0x3 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SHIFT (5)
+#define S3C64XX_PWRCFG_CFG_WFI_IGNORE (0x0 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_IDLE (0x1 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_STOP (0x2 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SLEEP (0x3 << 5)
+
+#define S3C64XX_PWRCFG_CFG_BATFLT_MASK (0x3 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT (3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE (0x0 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ (0x1 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP (0x3 << 3)
+
+#define S3C64XX_PWRCFG_CFG_BAT_WAKE (1 << 2)
+#define S3C64XX_PWRCFG_OSC27_EN (1 << 0)
+
+#define S3C64XX_EINT_MASK S3C_SYSREG(0x808)
+
+#define S3C64XX_NORMAL_CFG S3C_SYSREG(0x810)
+
+#define S3C64XX_NORMALCFG_IROM_ON (1 << 30)
+#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON (1 << 16)
+#define S3C64XX_NORMALCFG_DOMAIN_S_ON (1 << 15)
+#define S3C64XX_NORMALCFG_DOMAIN_F_ON (1 << 14)
+#define S3C64XX_NORMALCFG_DOMAIN_P_ON (1 << 13)
+#define S3C64XX_NORMALCFG_DOMAIN_I_ON (1 << 12)
+#define S3C64XX_NORMALCFG_DOMAIN_G_ON (1 << 10)
+#define S3C64XX_NORMALCFG_DOMAIN_V_ON (1 << 9)
+
+#define S3C64XX_STOP_CFG S3C_SYSREG(0x814)
+
+#define S3C64XX_STOPCFG_MEMORY_ARM_ON (1 << 29)
+#define S3C64XX_STOPCFG_TOP_MEMORY_ON (1 << 20)
+#define S3C64XX_STOPCFG_ARM_LOGIC_ON (1 << 17)
+#define S3C64XX_STOPCFG_TOP_LOGIC_ON (1 << 8)
+#define S3C64XX_STOPCFG_OSC_EN (1 << 0)
+
+#define S3C64XX_SLEEP_CFG S3C_SYSREG(0x818)
+
+#define S3C64XX_SLEEPCFG_OSC_EN (1 << 0)
+
+#define S3C64XX_STOP_MEM_CFG S3C_SYSREG(0x81c)
+
+#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN (1 << 6)
+#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN (1 << 5)
+#define S3C64XX_STOPMEMCFG_OTG_RETAIN (1 << 4)
+#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN (1 << 3)
+#define S3C64XX_STOPMEMCFG_IROM_RETAIN (1 << 2)
+#define S3C64XX_STOPMEMCFG_IRDA_RETAIN (1 << 1)
+#define S3C64XX_STOPMEMCFG_NFCON_RETAIN (1 << 0)
+
+#define S3C64XX_OSC_STABLE S3C_SYSREG(0x824)
+#define S3C64XX_PWR_STABLE S3C_SYSREG(0x828)
+
+#define S3C64XX_WAKEUP_STAT S3C_SYSREG(0x908)
+
+#define S3C64XX_WAKEUPSTAT_MMC2 (1 << 11)
+#define S3C64XX_WAKEUPSTAT_MMC1 (1 << 10)
+#define S3C64XX_WAKEUPSTAT_MMC0 (1 << 9)
+#define S3C64XX_WAKEUPSTAT_HSI (1 << 8)
+#define S3C64XX_WAKEUPSTAT_BATFLT (1 << 6)
+#define S3C64XX_WAKEUPSTAT_MSM (1 << 5)
+#define S3C64XX_WAKEUPSTAT_KEY (1 << 4)
+#define S3C64XX_WAKEUPSTAT_TS (1 << 3)
+#define S3C64XX_WAKEUPSTAT_RTC_TICK (1 << 2)
+#define S3C64XX_WAKEUPSTAT_RTC_ALARM (1 << 1)
+#define S3C64XX_WAKEUPSTAT_EINT (1 << 0)
+
+#define S3C64XX_BLK_PWR_STAT S3C_SYSREG(0x90c)
+
+#define S3C64XX_BLKPWRSTAT_G (1 << 7)
+#define S3C64XX_BLKPWRSTAT_ETM (1 << 6)
+#define S3C64XX_BLKPWRSTAT_S (1 << 5)
+#define S3C64XX_BLKPWRSTAT_F (1 << 4)
+#define S3C64XX_BLKPWRSTAT_P (1 << 3)
+#define S3C64XX_BLKPWRSTAT_I (1 << 2)
+#define S3C64XX_BLKPWRSTAT_V (1 << 1)
+#define S3C64XX_BLKPWRSTAT_TOP (1 << 0)
+
+#define S3C64XX_INFORM0 S3C_SYSREG(0xA00)
+#define S3C64XX_INFORM1 S3C_SYSREG(0xA04)
+#define S3C64XX_INFORM2 S3C_SYSREG(0xA08)
+#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C)
+
+#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
#include <mach/map.h>
#include <plat/cpu.h>
-/* GPIO is 0x7F008xxx, */
-#define S3C64XX_GPIOREG(x) (S3C64XX_VA_GPIO + (x))
-
-#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900)
-#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904)
-#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910)
-#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914)
-#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918)
-#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C)
-
-#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920)
-#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924)
-
-
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
#define eint_irq_to_bit(irq) (1 << eint_offset(irq))
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Mar 12 18:01:45 2009
+# Last update: Mon Mar 23 20:09:01 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134
rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135
smallogger MACH_SMALLOGGER SMALLOGGER 2136
+ccw9p9215 MACH_CCW9P9215 CCW9P9215 2137
+dm355_leopard MACH_DM355_LEOPARD DM355_LEOPARD 2138
+ts219 MACH_TS219 TS219 2139
+tny_a9263 MACH_TNY_A9263 TNY_A9263 2140
+apollo MACH_APOLLO APOLLO 2141
+at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
+spc300 MACH_SPC300 SPC300 2143
+eko MACH_EKO EKO 2144
u32 flags;
};
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
extern void vfp_save_state(void *location, u32 fpexc);
-#endif
@ retry the faulted instruction
ENDPROC(vfp_support_entry)
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
ENTRY(vfp_save_state)
@ Save the current VFP state
@ r0 - save location
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
ENDPROC(vfp_save_state)
-#endif
last_VFP_context_address:
.word last_VFP_context
static inline void vfp_pm_init(void) { }
#endif /* CONFIG_PM */
+/*
+ * Synchronise the hardware VFP state of a thread other than current with the
+ * saved one. This function is used by the ptrace mechanism.
+ */
+#ifdef CONFIG_SMP
+void vfp_sync_state(struct thread_info *thread)
+{
+ /*
+ * On SMP systems, the VFP state is automatically saved at every
+ * context switch. We mark the thread VFP state as belonging to a
+ * non-existent CPU so that the saved one will be reloaded when
+ * needed.
+ */
+ thread->vfpstate.hard.cpu = NR_CPUS;
+}
+#else
+void vfp_sync_state(struct thread_info *thread)
+{
+ unsigned int cpu = get_cpu();
+ u32 fpexc = fmrx(FPEXC);
+
+ /*
+ * If VFP is enabled, the previous state was already saved and
+ * last_VFP_context updated.
+ */
+ if (fpexc & FPEXC_EN)
+ goto out;
+
+ if (!last_VFP_context[cpu])
+ goto out;
+
+ /*
+ * Save the last VFP state on this CPU.
+ */
+ fmxr(FPEXC, fpexc | FPEXC_EN);
+ vfp_save_state(last_VFP_context[cpu], fpexc);
+ fmxr(FPEXC, fpexc);
+
+ /*
+ * Set the context to NULL to force a reload the next time the thread
+ * uses the VFP.
+ */
+ last_VFP_context[cpu] = NULL;
+
+out:
+ put_cpu();
+}
+#endif
+
#include <linux/smp.h>
/*
* in place; report VFP support to userspace.
*/
elf_hwcap |= HWCAP_VFP;
+#ifdef CONFIG_VFPv3
+ if (VFP_arch >= 3) {
+ elf_hwcap |= HWCAP_VFPv3;
+
+ /*
+ * Check for VFPv3 D16. CPUs in this configuration
+ * only have 16 x 64bit registers.
+ */
+ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
+ elf_hwcap |= HWCAP_VFPv3D16;
+ }
+#endif
#ifdef CONFIG_NEON
/*
* Check for the presence of the Advanced SIMD
.stepping = 6,
};
-#define PATA_ICSIDE_MAX_SG 128
-
struct pata_icside_state {
void __iomem *irq_port;
void __iomem *ioc_base;
u8 disabled;
unsigned int speed[ATA_MAX_DEVICES];
} port[2];
- struct scatterlist sg[PATA_ICSIDE_MAX_SG];
};
struct pata_icside_info {
{
struct ata_port *ap = qc->ap;
struct pata_icside_state *state = ap->host->private_data;
- struct scatterlist *sg, *rsg = state->sg;
unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE;
- unsigned int si;
/*
* We are simplex; BUG if we try to fiddle with DMA
*/
BUG_ON(dma_channel_active(state->dma));
- /*
- * Copy ATAs scattered sg list into a contiguous array of sg
- */
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- memcpy(rsg, sg, sizeof(*sg));
- rsg++;
- }
-
/*
* Route the DMA signals to the correct interface
*/
writeb(state->port[ap->port_no].port_sel, state->ioc_base);
set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]);
- set_dma_sg(state->dma, state->sg, rsg - state->sg);
+ set_dma_sg(state->dma, qc->sg, qc->n_elem);
set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
/* issue r/w command */
static struct scsi_host_template pata_icside_sht = {
ATA_BASE_SHT(DRV_NAME),
- .sg_tablesize = PATA_ICSIDE_MAX_SG,
- .dma_boundary = ~0, /* no dma boundaries */
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
};
static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
return -EBUSY;
if (cpu_is_omap24xx()) {
- rng_ick = clk_get(&pdev->dev, "rng_ick");
+ rng_ick = clk_get(&pdev->dev, "ick");
if (IS_ERR(rng_ick)) {
dev_err(&pdev->dev, "Could not get rng_ick\n");
ret = PTR_ERR(rng_ick);
}
/* Get IPU clock */
- ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk");
+ ipu_data.ipu_clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(ipu_data.ipu_clk)) {
ret = PTR_ERR(ipu_data.ipu_clk);
goto err_clk_get;
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/hardware/ioc.h>
#include <asm/system.h>
static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
{
- if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
- dev->iclk = clk_get(dev->dev, "i2c_ick");
- if (IS_ERR(dev->iclk)) {
- dev->iclk = NULL;
- return -ENODEV;
- }
+ int ret;
+
+ dev->iclk = clk_get(dev->dev, "ick");
+ if (IS_ERR(dev->iclk)) {
+ ret = PTR_ERR(dev->iclk);
+ dev->iclk = NULL;
+ return ret;
}
- dev->fclk = clk_get(dev->dev, "i2c_fck");
+ dev->fclk = clk_get(dev->dev, "fck");
if (IS_ERR(dev->fclk)) {
+ ret = PTR_ERR(dev->fclk);
if (dev->iclk != NULL) {
clk_put(dev->iclk);
dev->iclk = NULL;
}
dev->fclk = NULL;
- return -ENODEV;
+ return ret;
}
return 0;
{
clk_put(dev->fclk);
dev->fclk = NULL;
- if (dev->iclk != NULL) {
- clk_put(dev->iclk);
- dev->iclk = NULL;
- }
+ clk_put(dev->iclk);
+ dev->iclk = NULL;
}
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
WARN_ON(!dev->idle);
- if (dev->iclk != NULL)
- clk_enable(dev->iclk);
+ clk_enable(dev->iclk);
clk_enable(dev->fclk);
dev->idle = 0;
if (dev->iestate)
}
dev->idle = 1;
clk_disable(dev->fclk);
- if (dev->iclk != NULL)
- clk_disable(dev->iclk);
+ clk_disable(dev->iclk);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
if (cpu_class_is_omap1()) {
- struct clk *armxor_ck;
-
- armxor_ck = clk_get(NULL, "armxor_ck");
- if (IS_ERR(armxor_ck))
- dev_warn(dev->dev, "Could not get armxor_ck\n");
- else {
- fclk_rate = clk_get_rate(armxor_ck);
- clk_put(armxor_ck);
- }
+ /*
+ * The I2C functional clock is the armxor_ck, so there's
+ * no need to get "armxor_ck" separately. Now, if OMAP2420
+ * always returns 12MHz for the functional clock, we can
+ * do this bit unconditionally.
+ */
+ fclk_rate = clk_get_rate(dev->fclk);
+
/* TRM for 5912 says the I2C clock must be prescaled to be
* between 7 - 12 MHz. The XOR input clock is typically
* 12, 13 or 19.2 MHz. So we should have code that produces:
i2c->algo = i2c_versatile_algo;
i2c->algo.data = i2c;
- ret = i2c_bit_add_bus(&i2c->adap);
+ if (dev->id >= 0) {
+ /* static bus numbering */
+ i2c->adap.nr = dev->id;
+ ret = i2c_bit_add_numbered_bus(&i2c->adap);
+ } else
+ /* dynamic bus numbering */
+ ret = i2c_bit_add_bus(&i2c->adap);
if (ret >= 0) {
platform_set_drvdata(dev, i2c);
return 0;
platform_driver_unregister(&i2c_versatile_driver);
}
-module_init(i2c_versatile_init);
+subsys_initcall(i2c_versatile_init);
module_exit(i2c_versatile_exit);
MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
#include <linux/slab.h>
#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <asm/hardware/scoop.h>
#include <linux/slab.h>
#include <mach/spitz.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#define KB_ROWS 7
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/input.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/hardware/iomd.h>
MODULE_AUTHOR("Vojtech Pavlik, Russell King");
#include <linux/serio.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/hardware/iomd.h>
#include <asm/system.h>
#include <mach/sharpsl.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
{
int rval = 0;
- cam->fck = clk_get(cam->dev, "cam_fck");
+ cam->fck = clk_get(cam->dev, "fck");
if (IS_ERR(cam->fck)) {
- dev_err(cam->dev, "can't get cam_fck");
+ dev_err(cam->dev, "can't get camera fck");
rval = PTR_ERR(cam->fck);
omap24xxcam_clock_put(cam);
return rval;
}
- cam->ick = clk_get(cam->dev, "cam_ick");
+ cam->ick = clk_get(cam->dev, "ick");
if (IS_ERR(cam->ick)) {
- dev_err(cam->dev, "can't get cam_ick");
+ dev_err(cam->dev, "can't get camera ick");
rval = PTR_ERR(cam->ick);
omap24xxcam_clock_put(cam);
}
#include <linux/videodev2.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
#include <mach/camera.h>
#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
mod_timer(&host->timer, jiffies + HZ);
}
-static int mmci_probe(struct amba_device *dev, void *id)
+static int __devinit mmci_probe(struct amba_device *dev, void *id)
{
struct mmc_platform_data *plat = dev->dev.platform_data;
struct mmci_host *host;
return ret;
}
-static int mmci_remove(struct amba_device *dev)
+static int __devexit mmci_remove(struct amba_device *dev)
{
struct mmc_host *mmc = amba_get_drvdata(dev);
.name = DRIVER_NAME,
},
.probe = mmci_probe,
- .remove = mmci_remove,
+ .remove = __devexit_p(mmci_remove),
.suspend = mmci_suspend,
.resume = mmci_resume,
.id_table = mmci_ids,
#define HAS_DMA
#endif
-#define DRIVER_NAME "imx-mmc"
+#define DRIVER_NAME "mxc-mmc"
#define MMC_REG_STR_STP_CLK 0x00
#define MMC_REG_STATUS 0x04
host->res = r;
host->irq = irq;
- host->clk = clk_get(&pdev->dev, "sdhc_clk");
+ host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
goto out_iounmap;
if (!host->virt_base)
goto err_ioremap;
- if (cpu_is_omap24xx()) {
- host->iclk = clk_get(&pdev->dev, "mmc_ick");
- if (IS_ERR(host->iclk))
- goto err_free_mmc_host;
- clk_enable(host->iclk);
- }
-
- if (!cpu_is_omap24xx())
- host->fclk = clk_get(&pdev->dev, "mmc_ck");
- else
- host->fclk = clk_get(&pdev->dev, "mmc_fck");
+ host->iclk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(host->iclk))
+ goto err_free_mmc_host;
+ clk_enable(host->iclk);
+ host->fclk = clk_get(&pdev->dev, "fck");
if (IS_ERR(host->fclk)) {
ret = PTR_ERR(host->fclk);
goto err_free_iclk;
if (host->pdata->cleanup)
host->pdata->cleanup(&pdev->dev);
- if (host->iclk && !IS_ERR(host->iclk))
- clk_put(host->iclk);
- if (host->fclk && !IS_ERR(host->fclk))
- clk_put(host->fclk);
+ mmc_omap_fclk_enable(host, 0);
+ clk_put(host->fclk);
+ clk_disable(host->iclk);
+ clk_put(host->iclk);
iounmap(host->virt_base);
release_mem_region(pdev->resource[0].start,
sema_init(&host->sem, 1);
- host->iclk = clk_get(&pdev->dev, "mmchs_ick");
+ host->iclk = clk_get(&pdev->dev, "ick");
if (IS_ERR(host->iclk)) {
ret = PTR_ERR(host->iclk);
host->iclk = NULL;
goto err1;
}
- host->fclk = clk_get(&pdev->dev, "mmchs_fck");
+ host->fclk = clk_get(&pdev->dev, "fck");
if (IS_ERR(host->fclk)) {
ret = PTR_ERR(host->fclk);
host->fclk = NULL;
#include <asm/sizes.h>
-#include <mach/dma.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/mmc.h>
#include "pxamci.h"
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <asm/mach/flash.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/system.h>
#ifdef CONFIG_ARCH_P720T
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/err.h>
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/concat.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
- host->clk = clk_get(&pdev->dev, "nfc_clk");
+ host->clk = clk_get(&pdev->dev, "nfc");
if (IS_ERR(host->clk))
goto eclk;
#include <linux/irq.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa3xx_nand.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
#include <linux/crc32.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/system.h>
#define TX_BUFFERS 15
if (!(mdio_bus = mdiobus_alloc()))
return -ENOMEM;
- /* All MII PHY accesses use NPE-B Ethernet registers */
- spin_lock_init(&mdio_lock);
- mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
- __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+ if (cpu_is_ixp43x()) {
+ /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
+ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
+ return -ENOSYS;
+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
+ } else {
+ /* All MII PHY accesses use NPE-B Ethernet registers */
+ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
+ return -ENOSYS;
+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+ }
+ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+ spin_lock_init(&mdio_lock);
mdio_bus->name = "IXP4xx MII Bus";
mdio_bus->read = &ixp4xx_mdio_read;
mdio_bus->write = &ixp4xx_mdio_write;
static int __init eth_init_module(void)
{
int err;
- if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
- return -ENOSYS;
-
if ((err = ixp4xx_mdio_register()))
return err;
return platform_driver_register(&ixp4xx_eth_driver);
#include <mach/dma.h>
#include <mach/irda.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-uart.h>
+#include <mach/regs-ost.h>
#define FICP __REG(0x40800000) /* Start of FICP area */
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
* Use a DMA for RX and TX packets.
*/
#include <linux/dma-mapping.h>
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
static dma_addr_t rx_dmabuf, tx_dmabuf;
static int rx_dmalen, tx_dmalen;
defined(CONFIG_MACH_MAINSTONE) ||\
defined(CONFIG_MACH_ZYLONITE) ||\
defined(CONFIG_MACH_LITTLETON) ||\
+ defined(CONFIG_MACH_ZYLONITE2) ||\
defined(CONFIG_ARCH_VIPER)
#include <asm/mach-types.h>
*/
#include <linux/dma-mapping.h>
#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#ifdef SMC_insl
#undef SMC_insl
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <asm/mach-types.h>
#include "soc_common.h"
#include "pxa2xx_base.h"
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb) * PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA(Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA(Nb) + 2 * PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA(Nb) + 3 * PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA(0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO(0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr(0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem(0) /* PCMCIA 0 Memory */
+
+#define _PCMCIA1 _PCMCIA(1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO(1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr(1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem(1) /* PCMCIA 1 Memory */
+
#define MCXX_SETUP_MASK (0x7f)
#define MCXX_ASST_MASK (0x1f)
MECR &= ~MECR_NOS;
}
+static const char *skt_names[] = {
+ "PCMCIA socket 0",
+ "PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+ (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
int __pxa2xx_drv_pcmcia_probe(struct device *dev)
{
- int ret;
+ int i, ret;
struct pcmcia_low_level *ops;
+ struct skt_dev_info *sinfo;
+ struct soc_pcmcia_socket *skt;
if (!dev || !dev->platform_data)
return -ENODEV;
ops = (struct pcmcia_low_level *)dev->platform_data;
+ sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
+ if (!sinfo)
+ return -ENOMEM;
+
+ sinfo->nskt = ops->nr;
+
+ /* Initialize processor specific parameters */
+ for (i = 0; i < ops->nr; i++) {
+ skt = &sinfo->skt[i];
+
+ skt->nr = i;
+ skt->irq = NO_IRQ;
+
+ skt->res_skt.start = _PCMCIA(skt->nr);
+ skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
+ skt->res_skt.name = skt_names[skt->nr];
+ skt->res_skt.flags = IORESOURCE_MEM;
+
+ skt->res_io.start = _PCMCIAIO(skt->nr);
+ skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+ skt->res_io.name = "io";
+ skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+ skt->res_mem.start = _PCMCIAMem(skt->nr);
+ skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+ skt->res_mem.name = "memory";
+ skt->res_mem.flags = IORESOURCE_MEM;
+
+ skt->res_attr.start = _PCMCIAAttr(skt->nr);
+ skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+ skt->res_attr.name = "attribute";
+ skt->res_attr.flags = IORESOURCE_MEM;
+ }
+
/* Provide our PXA2xx specific timing routines. */
ops->set_timing = pxa2xx_pcmcia_set_timing;
#ifdef CONFIG_CPU_FREQ
ops->frequency_change = pxa2xx_pcmcia_frequency_change;
#endif
- ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr);
+ ret = soc_common_drv_pcmcia_probe(dev, ops, sinfo);
if (!ret)
pxa2xx_configure_sockets(dev);
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include "soc_common.h"
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include "soc_common.h"
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/eseries-gpio.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include <mach/lubbock.h>
#include "sa1111_generic.h"
#include <pcmcia/ss.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#include <mach/mainstone.h>
#include "soc_common.h"
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#include <mach/trizeps4.h>
#include "soc_common.h"
#include <asm/irq.h>
-#include <mach/pxa-regs.h>
#include <mach/viper.h>
#include <asm/mach-types.h>
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
/* Disable CF bus: */
- clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
- clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
- set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
}
static void
return -1;
}
- if (state->flags & SS_RESET)
- set_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
- else
- clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
+ assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
/* Silently ignore Vpp, output enable, speaker enable. */
static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
/* Enable CF bus: */
- set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
- set_h3600_egpio(IPAQ_EGPIO_OPT_ON);
- clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0);
msleep(10);
* socket 0 then socket 1.
*/
if (skt->nr == 1) {
- clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
- clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
/* hmm, does this suck power? */
- set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
}
}
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <pcmcia/ss.h>
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include "sa1111_generic.h"
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
return p - buf;
}
+static const char *skt_names[] = {
+ "PCMCIA socket 0",
+ "PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+ (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
int first, int nr)
{
+ struct skt_dev_info *sinfo;
+ struct soc_pcmcia_socket *skt;
+ int i;
+
+ sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
+ if (!sinfo)
+ return -ENOMEM;
+
+ sinfo->nskt = nr;
+
+ /* Initiliaze processor specific parameters */
+ for (i = 0; i < nr; i++) {
+ skt = &sinfo->skt[i];
+
+ skt->nr = first + i;
+ skt->irq = NO_IRQ;
+
+ skt->res_skt.start = _PCMCIA(skt->nr);
+ skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
+ skt->res_skt.name = skt_names[skt->nr];
+ skt->res_skt.flags = IORESOURCE_MEM;
+
+ skt->res_io.start = _PCMCIAIO(skt->nr);
+ skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+ skt->res_io.name = "io";
+ skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+ skt->res_mem.start = _PCMCIAMem(skt->nr);
+ skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+ skt->res_mem.name = "memory";
+ skt->res_mem.flags = IORESOURCE_MEM;
+
+ skt->res_attr.start = _PCMCIAAttr(skt->nr);
+ skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+ skt->res_attr.name = "attribute";
+ skt->res_attr.flags = IORESOURCE_MEM;
+ }
+
/*
* set default MECR calculation if the board specific
* code did not specify one...
ops->frequency_change = sa1100_pcmcia_frequency_change;
#endif
- return soc_common_drv_pcmcia_probe(dev, ops, first, nr);
+ return soc_common_drv_pcmcia_probe(dev, ops, sinfo);
}
EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
#include "soc_common.h"
-/* FIXME: platform dependent resource declaration has to move out of this file */
-#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
-#endif
-
#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
LIST_HEAD(soc_pcmcia_sockets);
static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
-static const char *skt_names[] = {
- "PCMCIA socket 0",
- "PCMCIA socket 1",
-};
-
-struct skt_dev_info {
- int nskt;
- struct soc_pcmcia_socket skt[0];
-};
-
-#define SKT_DEV_INFO_SIZE(n) \
- (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
-
#ifdef CONFIG_CPU_FREQ
static int
soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
static void soc_pcmcia_cpufreq_unregister(void) {}
#endif
-int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
+int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
+ struct skt_dev_info *sinfo)
{
- struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
int ret, i;
mutex_lock(&soc_pcmcia_sockets_lock);
- sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
- if (!sinfo) {
- ret = -ENOMEM;
- goto out;
- }
-
- sinfo->nskt = nr;
-
/*
* Initialise the per-socket structure.
*/
- for (i = 0; i < nr; i++) {
+ for (i = 0; i < sinfo->nskt; i++) {
skt = &sinfo->skt[i];
skt->socket.ops = &soc_common_pcmcia_operations;
skt->poll_timer.data = (unsigned long)skt;
skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD;
- skt->nr = first + i;
- skt->irq = NO_IRQ;
skt->dev = dev;
skt->ops = ops;
- skt->res_skt.start = _PCMCIA(skt->nr);
- skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
- skt->res_skt.name = skt_names[skt->nr];
- skt->res_skt.flags = IORESOURCE_MEM;
-
ret = request_resource(&iomem_resource, &skt->res_skt);
if (ret)
goto out_err_1;
- skt->res_io.start = _PCMCIAIO(skt->nr);
- skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
- skt->res_io.name = "io";
- skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-
ret = request_resource(&skt->res_skt, &skt->res_io);
if (ret)
goto out_err_2;
- skt->res_mem.start = _PCMCIAMem(skt->nr);
- skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
- skt->res_mem.name = "memory";
- skt->res_mem.flags = IORESOURCE_MEM;
-
ret = request_resource(&skt->res_skt, &skt->res_mem);
if (ret)
goto out_err_3;
- skt->res_attr.start = _PCMCIAAttr(skt->nr);
- skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
- skt->res_attr.name = "attribute";
- skt->res_attr.flags = IORESOURCE_MEM;
-
ret = request_resource(&skt->res_skt, &skt->res_attr);
if (ret)
goto out_err_4;
struct list_head node;
};
+struct skt_dev_info {
+ int nskt;
+ struct soc_pcmcia_socket skt[0];
+};
+
struct pcmcia_state {
unsigned detect: 1,
ready: 1,
extern struct list_head soc_pcmcia_sockets;
-extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
+extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, struct skt_dev_info *sinfo);
extern int soc_common_drv_pcmcia_remove(struct device *dev);
#include <linux/bcd.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/delay.h>
#define RTC_TIME_REG_OFFS 0
return -EINVAL;
}
+ /* make sure it is actually functional */
+ if (rtc_time == 0x01000000) {
+ ssleep(1);
+ rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
+ if (rtc_time == 0x01000000) {
+ dev_err(&pdev->dev, "internal RTC not ticking\n");
+ return -ENODEV;
+ }
+ }
+
platform_set_drvdata(pdev, pdata);
pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
&mv_rtc_ops, THIS_MODULE);
#include <asm/irq.h>
#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-rtc.h>
+#include <mach/regs-ost.h>
#endif
#define RTC_DEF_DIVIDER 32768 - 1
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "cumanascsi2",
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "eesox",
.can_queue = 8,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 2,
.use_clustering = ENABLE_CLUSTERING,
.proc_name = "powertec",
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/dec21285.h>
config SERIAL_PXA
bool "PXA serial port support"
- depends on ARM && ARCH_PXA
+ depends on ARCH_PXA || ARCH_MMP
select SERIAL_CORE
help
If you have a machine based on an Intel XScale PXA2xx CPU you
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/clps7111.h>
sport->timer.function = imx_timeout;
sport->timer.data = (unsigned long)sport;
- sport->clk = clk_get(&pdev->dev, "uart_clk");
+ sport->clk = clk_get(&pdev->dev, "uart");
if (IS_ERR(sport->clk)) {
ret = PTR_ERR(sport->clk);
goto unmap;
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/regs-uart.h>
-
+#include <linux/io.h>
struct uart_pxa_port {
struct uart_port port;
* Ensure the port will be enabled.
* This is required especially for serial console.
*/
- up->ier |= IER_UUE;
+ up->ier |= UART_IER_UUE;
/*
* Update the per-port timeout.
sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
sport->port.uartclk = clk_get_rate(sport->clk);
- /*
- * Is it worth keeping this?
- */
- if (mmres->start == __PREG(FFUART))
- sport->name = "FFUART";
- else if (mmres->start == __PREG(BTUART))
- sport->name = "BTUART";
- else if (mmres->start == __PREG(STUART))
- sport->name = "STUART";
- else if (mmres->start == __PREG(HWUART))
- sport->name = "HWUART";
- else
+ switch (dev->id) {
+ case 0: sport->name = "FFUART"; break;
+ case 1: sport->name = "BTUART"; break;
+ case 2: sport->name = "STUART"; break;
+ case 3: sport->name = "HWUART"; break;
+ default:
sport->name = "???";
+ break;
+ }
sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
if (!sport->port.membase) {
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/mach/serial_sa1100.h>
spin_lock_init(&mcspi->lock);
INIT_LIST_HEAD(&mcspi->msg_queue);
- mcspi->ick = clk_get(&pdev->dev, "mcspi_ick");
+ mcspi->ick = clk_get(&pdev->dev, "ick");
if (IS_ERR(mcspi->ick)) {
dev_dbg(&pdev->dev, "can't get mcspi_ick\n");
status = PTR_ERR(mcspi->ick);
goto err1a;
}
- mcspi->fck = clk_get(&pdev->dev, "mcspi_fck");
+ mcspi->fck = clk_get(&pdev->dev, "fck");
if (IS_ERR(mcspi->fck)) {
dev_dbg(&pdev->dev, "can't get mcspi_fck\n");
status = PTR_ERR(mcspi->fck);
dev_set_drvdata(&pdev->dev, uwire);
- uwire->ck = clk_get(&pdev->dev, "armxor_ck");
- if (!uwire->ck || IS_ERR(uwire->ck)) {
- dev_dbg(&pdev->dev, "no mpu_xor_clk ?\n");
+ uwire->ck = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(uwire->ck)) {
+ status = PTR_ERR(uwire->ck);
+ dev_dbg(&pdev->dev, "no functional clock?\n");
spi_master_put(master);
- return -ENODEV;
+ return status;
}
clk_enable(uwire->ck);
#include <asm/delay.h>
#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ssp.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
#include <linux/signal.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-
static struct clk *usb_host_clock;
static void ep93xx_start_hc(struct device *dev)
config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && ARM && ARCH_IMX
+ depends on FB && (ARCH_IMX || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
the bootloader.
config FB_MX3
- tristate "MX3 Framebuffer support"
- depends on FB && MX3_IPU
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- default y
- help
- This is a framebuffer device for the i.MX31 LCD Controller. So
- far only synchronous displays are supported. If you plan to use
- an LCD display with your i.MX31 system, say Y here.
+ tristate "MX3 Framebuffer support"
+ depends on FB && MX3_IPU
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ This is a framebuffer device for the i.MX31 LCD Controller. So
+ far only synchronous displays are supported. If you plan to use
+ an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+ tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Broadsheet
+ controller. The release name for this device was Epson S1D13521
+ and could also have been called by other names when coupled with
+ a bridge adapter.
source "drivers/video/omap/Kconfig"
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_MX3) += mx3fb.o
+obj-$(CONFIG_FB_MX3) += mx3fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
#include <linux/fb.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
--- /dev/null
+/*
+ * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ *
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+
+#include <video/broadsheetfb.h>
+
+/* Display specific information */
+#define DPY_W 800
+#define DPY_H 600
+
+static struct fb_fix_screeninfo broadsheetfb_fix __devinitdata = {
+ .id = "broadsheetfb",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_STATIC_PSEUDOCOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .line_length = DPY_W,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo broadsheetfb_var __devinitdata = {
+ .xres = DPY_W,
+ .yres = DPY_H,
+ .xres_virtual = DPY_W,
+ .yres_virtual = DPY_H,
+ .bits_per_pixel = 8,
+ .grayscale = 1,
+ .red = { 0, 4, 0 },
+ .green = { 0, 4, 0 },
+ .blue = { 0, 4, 0 },
+ .transp = { 0, 0, 0 },
+};
+
+/* main broadsheetfb functions */
+static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, BS_WR, 0);
+ par->board->set_hdb(par, data);
+ par->board->set_ctl(par, BS_WR, 1);
+}
+
+static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, BS_DC, 0);
+ broadsheet_issue_data(par, data);
+}
+
+static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->wait_for_rdy(par);
+
+ par->board->set_ctl(par, BS_CS, 0);
+ broadsheet_issue_cmd(par, data);
+ par->board->set_ctl(par, BS_DC, 1);
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+ int argc, u16 *argv)
+{
+ int i;
+
+ par->board->wait_for_rdy(par);
+
+ par->board->set_ctl(par, BS_CS, 0);
+ broadsheet_issue_cmd(par, cmd);
+ par->board->set_ctl(par, BS_DC, 1);
+
+ for (i = 0; i < argc; i++)
+ broadsheet_issue_data(par, argv[i]);
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+ u16 *data)
+{
+ int i;
+ u16 tmp;
+
+ par->board->set_ctl(par, BS_CS, 0);
+ par->board->set_ctl(par, BS_DC, 1);
+
+ for (i = 0; i < size; i++) {
+ par->board->set_ctl(par, BS_WR, 0);
+ tmp = (data[i] & 0x0F) << 4;
+ tmp |= (data[i] & 0x0F00) << 4;
+ par->board->set_hdb(par, tmp);
+ par->board->set_ctl(par, BS_WR, 1);
+ }
+
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+{
+ u16 res;
+ /* wait for ready to go hi. (lo is busy) */
+ par->board->wait_for_rdy(par);
+
+ /* cs lo, dc lo for cmd, we lo for each data, db as usual */
+ par->board->set_ctl(par, BS_DC, 1);
+ par->board->set_ctl(par, BS_CS, 0);
+ par->board->set_ctl(par, BS_WR, 0);
+
+ res = par->board->get_hdb(par);
+
+ /* strobe wr */
+ par->board->set_ctl(par, BS_WR, 1);
+ par->board->set_ctl(par, BS_CS, 1);
+
+ return res;
+}
+
+static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+ u16 data)
+{
+ /* wait for ready to go hi. (lo is busy) */
+ par->board->wait_for_rdy(par);
+
+ /* cs lo, dc lo for cmd, we lo for each data, db as usual */
+ par->board->set_ctl(par, BS_CS, 0);
+
+ broadsheet_issue_cmd(par, BS_CMD_WR_REG);
+
+ par->board->set_ctl(par, BS_DC, 1);
+
+ broadsheet_issue_data(par, reg);
+ broadsheet_issue_data(par, data);
+
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
+{
+ broadsheet_send_command(par, reg);
+ msleep(100);
+ return broadsheet_get_data(par);
+}
+
+static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
+{
+ u16 args[5];
+
+ args[0] = DPY_W;
+ args[1] = DPY_H;
+ args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */
+ args[3] = 2; /* gdrv cfg */
+ args[4] = (4 | (1 << 7)); /* lut index format */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+ /* did the controller really set it? */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+ args[0] = 4; /* fsync len */
+ args[1] = (10 << 8) | 4; /* fend/fbegin len */
+ args[2] = 10; /* line sync len */
+ args[3] = (100 << 8) | 4; /* line end/begin len */
+ args[4] = 6; /* pixel clock cfg */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
+
+ /* setup waveform */
+ args[0] = 0x886;
+ args[1] = 0;
+ broadsheet_send_cmdargs(par, BS_CMD_RD_WFM_INFO, 2, args);
+
+ broadsheet_send_command(par, BS_CMD_UPD_GDRV_CLR);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_write_reg(par, 0x330, 0x84);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ args[0] = (0x3 << 4);
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+ broadsheet_burst_write(par, DPY_W*DPY_H/2,
+ (u16 *) par->info->screen_base);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+}
+
+static void __devinit broadsheet_init(struct broadsheetfb_par *par)
+{
+ broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
+ /* the controller needs a second */
+ msleep(1000);
+ broadsheet_init_display(par);
+}
+
+static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
+ u16 y1, u16 y2)
+{
+ u16 args[5];
+ unsigned char *buf = (unsigned char *)par->info->screen_base;
+
+ /* y1 must be a multiple of 4 so drop the lower bits */
+ y1 &= 0xFFFC;
+ /* y2 must be a multiple of 4 , but - 1 so up the lower bits */
+ y2 |= 0x0003;
+
+ args[0] = 0x3 << 4;
+ args[1] = 0;
+ args[2] = y1;
+ args[3] = cpu_to_le16(par->info->var.xres);
+ args[4] = y2;
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG_AREA, 5, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+ buf += y1 * par->info->var.xres;
+ broadsheet_burst_write(par, ((1 + y2 - y1) * par->info->var.xres)/2,
+ (u16 *) buf);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+
+}
+
+static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
+{
+ u16 args[5];
+
+ args[0] = 0x3 << 4;
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+ broadsheet_burst_write(par, DPY_W*DPY_H/2,
+ (u16 *) par->info->screen_base);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+
+}
+
+/* this is called back from the deferred io workqueue */
+static void broadsheetfb_dpy_deferred_io(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ u16 y1 = 0, h = 0;
+ int prev_index = -1;
+ struct page *cur;
+ struct fb_deferred_io *fbdefio = info->fbdefio;
+ int h_inc;
+ u16 yres = info->var.yres;
+ u16 xres = info->var.xres;
+
+ /* height increment is fixed per page */
+ h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
+
+ /* walk the written page list and swizzle the data */
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ if (prev_index < 0) {
+ /* just starting so assign first page */
+ y1 = (cur->index << PAGE_SHIFT) / xres;
+ h = h_inc;
+ } else if ((prev_index + 1) == cur->index) {
+ /* this page is consecutive so increase our height */
+ h += h_inc;
+ } else {
+ /* page not consecutive, issue previous update first */
+ broadsheetfb_dpy_update_pages(info->par, y1, y1 + h);
+ /* start over with our non consecutive page */
+ y1 = (cur->index << PAGE_SHIFT) / xres;
+ h = h_inc;
+ }
+ prev_index = cur->index;
+ }
+
+ /* if we still have any pages to update we do so now */
+ if (h >= yres) {
+ /* its a full screen update, just do it */
+ broadsheetfb_dpy_update(info->par);
+ } else {
+ broadsheetfb_dpy_update_pages(info->par, y1,
+ min((u16) (y1 + h), yres));
+ }
+}
+
+static void broadsheetfb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_fillrect(info, rect);
+
+ broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_copyarea(info, area);
+
+ broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_imageblit(struct fb_info *info,
+ const struct fb_image *image)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_imageblit(info, image);
+
+ broadsheetfb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t broadsheetfb_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct broadsheetfb_par *par = info->par;
+ unsigned long p = *ppos;
+ void *dst;
+ int err = 0;
+ unsigned long total_size;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return -EPERM;
+
+ total_size = info->fix.smem_len;
+
+ if (p > total_size)
+ return -EFBIG;
+
+ if (count > total_size) {
+ err = -EFBIG;
+ count = total_size;
+ }
+
+ if (count + p > total_size) {
+ if (!err)
+ err = -ENOSPC;
+
+ count = total_size - p;
+ }
+
+ dst = (void *)(info->screen_base + p);
+
+ if (copy_from_user(dst, buf, count))
+ err = -EFAULT;
+
+ if (!err)
+ *ppos += count;
+
+ broadsheetfb_dpy_update(par);
+
+ return (err) ? err : count;
+}
+
+static struct fb_ops broadsheetfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_read = fb_sys_read,
+ .fb_write = broadsheetfb_write,
+ .fb_fillrect = broadsheetfb_fillrect,
+ .fb_copyarea = broadsheetfb_copyarea,
+ .fb_imageblit = broadsheetfb_imageblit,
+};
+
+static struct fb_deferred_io broadsheetfb_defio = {
+ .delay = HZ/4,
+ .deferred_io = broadsheetfb_dpy_deferred_io,
+};
+
+static int __devinit broadsheetfb_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ struct broadsheet_board *board;
+ int retval = -ENOMEM;
+ int videomemorysize;
+ unsigned char *videomemory;
+ struct broadsheetfb_par *par;
+ int i;
+
+ /* pick up board specific routines */
+ board = dev->dev.platform_data;
+ if (!board)
+ return -EINVAL;
+
+ /* try to count device specific driver, if can't, platform recalls */
+ if (!try_module_get(board->owner))
+ return -ENODEV;
+
+ info = framebuffer_alloc(sizeof(struct broadsheetfb_par), &dev->dev);
+ if (!info)
+ goto err;
+
+ videomemorysize = (DPY_W*DPY_H);
+ videomemory = vmalloc(videomemorysize);
+ if (!videomemory)
+ goto err_fb_rel;
+
+ memset(videomemory, 0, videomemorysize);
+
+ info->screen_base = (char *)videomemory;
+ info->fbops = &broadsheetfb_ops;
+
+ info->var = broadsheetfb_var;
+ info->fix = broadsheetfb_fix;
+ info->fix.smem_len = videomemorysize;
+ par = info->par;
+ par->info = info;
+ par->board = board;
+ par->write_reg = broadsheet_write_reg;
+ par->read_reg = broadsheet_read_reg;
+ init_waitqueue_head(&par->waitq);
+
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ info->fbdefio = &broadsheetfb_defio;
+ fb_deferred_io_init(info);
+
+ retval = fb_alloc_cmap(&info->cmap, 16, 0);
+ if (retval < 0) {
+ dev_err(&dev->dev, "Failed to allocate colormap\n");
+ goto err_vfree;
+ }
+
+ /* set cmap */
+ for (i = 0; i < 16; i++)
+ info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/32;
+ memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*16);
+ memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*16);
+
+ retval = par->board->setup_irq(info);
+ if (retval < 0)
+ goto err_cmap;
+
+ /* this inits the dpy */
+ retval = board->init(par);
+ if (retval < 0)
+ goto err_free_irq;
+
+ broadsheet_init(par);
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err_free_irq;
+ platform_set_drvdata(dev, info);
+
+ printk(KERN_INFO
+ "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
+ info->node, videomemorysize >> 10);
+
+
+ return 0;
+
+err_free_irq:
+ board->cleanup(par);
+err_cmap:
+ fb_dealloc_cmap(&info->cmap);
+err_vfree:
+ vfree(videomemory);
+err_fb_rel:
+ framebuffer_release(info);
+err:
+ module_put(board->owner);
+ return retval;
+
+}
+
+static int __devexit broadsheetfb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ struct broadsheetfb_par *par = info->par;
+ unregister_framebuffer(info);
+ fb_deferred_io_cleanup(info);
+ par->board->cleanup(par);
+ fb_dealloc_cmap(&info->cmap);
+ vfree((void *)info->screen_base);
+ module_put(par->board->owner);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+static struct platform_driver broadsheetfb_driver = {
+ .probe = broadsheetfb_probe,
+ .remove = broadsheetfb_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "broadsheetfb",
+ },
+};
+
+static int __init broadsheetfb_init(void)
+{
+ return platform_driver_register(&broadsheetfb_driver);
+}
+
+static void __exit broadsheetfb_exit(void)
+{
+ platform_driver_unregister(&broadsheetfb_driver);
+}
+
+module_init(broadsheetfb_init);
+module_exit(broadsheetfb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Broadsheet controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#ifdef CONFIG_ARCH_SHARK
-#include <mach/hardware.h>
+#include <mach/framebuffer.h>
static int __devinit cyberpro_vl_probe(void)
{
* linux-arm-kernel@lists.arm.linux.org.uk
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#define LCDC_SIZE 0x04
#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
+
+#ifdef CONFIG_ARCH_MX1
#define SIZE_YMAX(y) ((y) & 0x1ff)
+#else
+#define SIZE_YMAX(y) ((y) & 0x3ff)
+#endif
#define LCDC_VPW 0x08
#define VPW_VPW(x) ((x) & 0x3ff)
#define CPOS_CC0 (1<<30)
#define CPOS_OP (1<<28)
#define CPOS_CXP(x) (((x) & 3ff) << 16)
+
+#ifdef CONFIG_ARCH_MX1
#define CPOS_CYP(y) ((y) & 0x1ff)
+#else
+#define CPOS_CYP(y) ((y) & 0x3ff)
+#endif
#define LCDC_LCWHB 0x10
#define LCWHB_BK_EN (1<<31)
#define LCWHB_BD(x) ((x) & 0xff)
#define LCDC_LCHCC 0x14
+
+#ifdef CONFIG_ARCH_MX1
#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+#else
+#define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x3f)
+#endif
#define LCDC_PCR 0x18
/* bit fields in imxfb.h */
#define LCDC_RMCR 0x34
+
+#ifdef CONFIG_ARCH_MX1
#define RMCR_LCDC_EN (1<<1)
+#else
+#define RMCR_LCDC_EN 0
+#endif
+
#define RMCR_SELF_REF (1<<0)
#define LCDC_LCDICR 0x38
#define MIN_XRES 64
#define MIN_YRES 64
+/* Actually this really is 18bit support, the lowest 2 bits of each colour
+ * are unused in hardware. We claim to have 24bit support to make software
+ * like X work, which does not support 18bit.
+ */
+static struct imxfb_rgb def_rgb_18 = {
+ .red = {.offset = 16, .length = 8,},
+ .green = {.offset = 8, .length = 8,},
+ .blue = {.offset = 0, .length = 8,},
+ .transp = {.offset = 0, .length = 0,},
+};
+
static struct imxfb_rgb def_rgb_16_tft = {
.red = {.offset = 11, .length = 5,},
.green = {.offset = 5, .length = 6,},
pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
+ case 32:
+ rgb = &def_rgb_18;
+ break;
case 16:
default:
if (readl(fbi->regs + LCDC_PCR) & PCR_TFT)
struct imxfb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
- pr_debug("set_par\n");
-
- if (var->bits_per_pixel == 16)
+ if (var->bits_per_pixel == 16 || var->bits_per_pixel == 32)
info->fix.visual = FB_VISUAL_TRUECOLOR;
else if (!fbi->cmap_static)
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
{
pr_debug("Enabling LCD controller\n");
- /* initialize LCDC */
- writel(readl(fbi->regs + LCDC_RMCR) & ~RMCR_LCDC_EN,
- fbi->regs + LCDC_RMCR); /* just to be safe... */
-
writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
/* physical screen start address */
info->fix.id, var->lower_margin);
#endif
- writel(HCR_H_WIDTH(var->hsync_len) |
- HCR_H_WAIT_1(var->right_margin) |
- HCR_H_WAIT_2(var->left_margin),
+ writel(HCR_H_WIDTH(var->hsync_len - 1) |
+ HCR_H_WAIT_1(var->right_margin - 1) |
+ HCR_H_WAIT_2(var->left_margin - 3),
fbi->regs + LCDC_HCR);
writel(VCR_V_WIDTH(var->vsync_len) |
info->fix.smem_start = fbi->screen_dma;
}
+ if (pdata->init) {
+ ret = pdata->init(fbi->pdev);
+ if (ret)
+ goto failed_platform_init;
+ }
+
/*
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
failed_register:
fb_dealloc_cmap(&info->cmap);
failed_cmap:
+ if (pdata->exit)
+ pdata->exit(fbi->pdev);
+failed_platform_init:
if (!pdata->fixed_screen_cpu)
dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
fbi->map_dma);
static int __devexit imxfb_remove(struct platform_device *pdev)
{
+ struct imx_fb_platform_data *pdata;
struct fb_info *info = platform_get_drvdata(pdev);
struct imxfb_info *fbi = info->par;
struct resource *res;
unregister_framebuffer(info);
+ pdata = pdev->dev.platform_data;
+ if (pdata->exit)
+ pdata->exit(fbi->pdev);
+
fb_dealloc_cmap(&info->cmap);
kfree(info->pseudo_palette);
framebuffer_release(info);
#include <asm/io.h>
#include <asm/uaccess.h>
-#define MX3FB_NAME "mx3_sdc_fb"
+#define MX3FB_NAME "mx3_sdc_fb"
-#define MX3FB_REG_OFFSET 0xB4
+#define MX3FB_REG_OFFSET 0xB4
/* SDC Registers */
-#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET)
-#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET)
-#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET)
-#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET)
-#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET)
-#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET)
-#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET)
-#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET)
-#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET)
+#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET)
/* Register bits */
-#define SDC_COM_TFT_COLOR 0x00000001UL
-#define SDC_COM_FG_EN 0x00000010UL
-#define SDC_COM_GWSEL 0x00000020UL
-#define SDC_COM_GLB_A 0x00000040UL
-#define SDC_COM_KEY_COLOR_G 0x00000080UL
-#define SDC_COM_BG_EN 0x00000200UL
-#define SDC_COM_SHARP 0x00001000UL
+#define SDC_COM_TFT_COLOR 0x00000001UL
+#define SDC_COM_FG_EN 0x00000010UL
+#define SDC_COM_GWSEL 0x00000020UL
+#define SDC_COM_GLB_A 0x00000040UL
+#define SDC_COM_KEY_COLOR_G 0x00000080UL
+#define SDC_COM_BG_EN 0x00000200UL
+#define SDC_COM_SHARP 0x00001000UL
-#define SDC_V_SYNC_WIDTH_L 0x00000001UL
+#define SDC_V_SYNC_WIDTH_L 0x00000001UL
/* Display Interface registers */
-#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET)
-#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET)
-#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET)
-#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET)
-#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET)
-#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET)
-#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET)
-#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET)
+#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET)
/* DI_DISP_SIG_POL bits */
-#define DI_D3_VSYNC_POL_SHIFT 28
-#define DI_D3_HSYNC_POL_SHIFT 27
-#define DI_D3_DRDY_SHARP_POL_SHIFT 26
-#define DI_D3_CLK_POL_SHIFT 25
-#define DI_D3_DATA_POL_SHIFT 24
+#define DI_D3_VSYNC_POL_SHIFT 28
+#define DI_D3_HSYNC_POL_SHIFT 27
+#define DI_D3_DRDY_SHARP_POL_SHIFT 26
+#define DI_D3_CLK_POL_SHIFT 25
+#define DI_D3_DATA_POL_SHIFT 24
/* DI_DISP_IF_CONF bits */
-#define DI_D3_CLK_IDLE_SHIFT 26
-#define DI_D3_CLK_SEL_SHIFT 25
-#define DI_D3_DATAMSK_SHIFT 24
+#define DI_D3_CLK_IDLE_SHIFT 26
+#define DI_D3_CLK_SEL_SHIFT 25
+#define DI_D3_DATAMSK_SHIFT 24
enum ipu_panel {
- IPU_PANEL_SHARP_TFT,
- IPU_PANEL_TFT,
+ IPU_PANEL_SHARP_TFT,
+ IPU_PANEL_TFT,
};
struct ipu_di_signal_cfg {
- unsigned datamask_en:1;
- unsigned clksel_en:1;
- unsigned clkidle_en:1;
- unsigned data_pol:1; /* true = inverted */
- unsigned clk_pol:1; /* true = rising edge */
- unsigned enable_pol:1;
- unsigned Hsync_pol:1; /* true = active high */
- unsigned Vsync_pol:1;
+ unsigned datamask_en:1;
+ unsigned clksel_en:1;
+ unsigned clkidle_en:1;
+ unsigned data_pol:1; /* true = inverted */
+ unsigned clk_pol:1; /* true = rising edge */
+ unsigned enable_pol:1;
+ unsigned Hsync_pol:1; /* true = active high */
+ unsigned Vsync_pol:1;
};
static const struct fb_videomode mx3fb_modedb[] = {
- {
- /* 240x320 @ 60 Hz */
- .name = "Sharp-QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
- FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
- FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x33 @ 60 Hz */
- .name = "Sharp-CLI",
- .refresh = 60,
- .xres = 240,
- .yres = 33,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9 + 287,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
- FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
- FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 640x480 @ 60 Hz */
- .name = "NEC-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 34,
- .lower_margin = 40,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* NTSC TV output */
- .name = "TV-NTSC",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 37538,
- .left_margin = 38,
- .right_margin = 858 - 640 - 38 - 3,
- .upper_margin = 36,
- .lower_margin = 518 - 480 - 36 - 1,
- .hsync_len = 3,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* PAL TV output */
- .name = "TV-PAL",
- .refresh = 50,
- .xres = 640,
- .yres = 480,
- .pixclock = 37538,
- .left_margin = 38,
- .right_margin = 960 - 640 - 38 - 32,
- .upper_margin = 32,
- .lower_margin = 555 - 480 - 32 - 3,
- .hsync_len = 32,
- .vsync_len = 3,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* TV output VGA mode, 640x480 @ 65 Hz */
- .name = "TV-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 40574,
- .left_margin = 35,
- .right_margin = 45,
- .upper_margin = 9,
- .lower_margin = 1,
- .hsync_len = 46,
- .vsync_len = 5,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+ FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x33 @ 60 Hz */
+ .name = "Sharp-CLI",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 33,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9 + 287,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+ FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 640x480 @ 60 Hz */
+ .name = "NEC-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 34,
+ .lower_margin = 40,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* NTSC TV output */
+ .name = "TV-NTSC",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 37538,
+ .left_margin = 38,
+ .right_margin = 858 - 640 - 38 - 3,
+ .upper_margin = 36,
+ .lower_margin = 518 - 480 - 36 - 1,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* PAL TV output */
+ .name = "TV-PAL",
+ .refresh = 50,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 37538,
+ .left_margin = 38,
+ .right_margin = 960 - 640 - 38 - 32,
+ .upper_margin = 32,
+ .lower_margin = 555 - 480 - 32 - 3,
+ .hsync_len = 32,
+ .vsync_len = 3,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* TV output VGA mode, 640x480 @ 65 Hz */
+ .name = "TV-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 40574,
+ .left_margin = 35,
+ .right_margin = 45,
+ .upper_margin = 9,
+ .lower_margin = 1,
+ .hsync_len = 46,
+ .vsync_len = 5,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
};
struct mx3fb_data {
- struct fb_info *fbi;
- int backlight_level;
- void __iomem *reg_base;
- spinlock_t lock;
- struct device *dev;
-
- uint32_t h_start_width;
- uint32_t v_start_width;
+ struct fb_info *fbi;
+ int backlight_level;
+ void __iomem *reg_base;
+ spinlock_t lock;
+ struct device *dev;
+
+ uint32_t h_start_width;
+ uint32_t v_start_width;
};
struct dma_chan_request {
- struct mx3fb_data *mx3fb;
- enum ipu_channel id;
+ struct mx3fb_data *mx3fb;
+ enum ipu_channel id;
};
/* MX3 specific framebuffer information. */
struct mx3fb_info {
- int blank;
- enum ipu_channel ipu_ch;
- uint32_t cur_ipu_buf;
+ int blank;
+ enum ipu_channel ipu_ch;
+ uint32_t cur_ipu_buf;
- u32 pseudo_palette[16];
+ u32 pseudo_palette[16];
- struct completion flip_cmpl;
- struct mutex mutex; /* Protects fb-ops */
- struct mx3fb_data *mx3fb;
- struct idmac_channel *idmac_channel;
- struct dma_async_tx_descriptor *txd;
- dma_cookie_t cookie;
- struct scatterlist sg[2];
+ struct completion flip_cmpl;
+ struct mutex mutex; /* Protects fb-ops */
+ struct mx3fb_data *mx3fb;
+ struct idmac_channel *idmac_channel;
+ struct dma_async_tx_descriptor *txd;
+ dma_cookie_t cookie;
+ struct scatterlist sg[2];
- u32 sync; /* preserve var->sync flags */
+ u32 sync; /* preserve var->sync flags */
};
static void mx3fb_dma_done(void *);
static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
{
- return __raw_readl(mx3fb->reg_base + reg);
+ return __raw_readl(mx3fb->reg_base + reg);
}
static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
{
- __raw_writel(value, mx3fb->reg_base + reg);
+ __raw_writel(value, mx3fb->reg_base + reg);
}
static const uint32_t di_mappings[] = {
- 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */
- 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */
- 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */
- 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */
+ 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */
+ 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */
+ 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */
+ 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */
};
static void sdc_fb_init(struct mx3fb_info *fbi)
{
- struct mx3fb_data *mx3fb = fbi->mx3fb;
- uint32_t reg;
+ struct mx3fb_data *mx3fb = fbi->mx3fb;
+ uint32_t reg;
- reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
}
/* Returns enabled flag before uninit */
static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
{
- struct mx3fb_data *mx3fb = fbi->mx3fb;
- uint32_t reg;
+ struct mx3fb_data *mx3fb = fbi->mx3fb;
+ uint32_t reg;
- reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
- return reg & SDC_COM_BG_EN;
+ return reg & SDC_COM_BG_EN;
}
static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
{
- struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- struct idmac_channel *ichan = mx3_fbi->idmac_channel;
- struct dma_chan *dma_chan = &ichan->dma_chan;
- unsigned long flags;
- dma_cookie_t cookie;
-
- dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
- to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
-
- /* This enables the channel */
- if (mx3_fbi->cookie < 0) {
- mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
- &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
- if (!mx3_fbi->txd) {
- dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
- dma_chan->chan_id);
- return;
- }
-
- mx3_fbi->txd->callback_param = mx3_fbi->txd;
- mx3_fbi->txd->callback = mx3fb_dma_done;
-
- cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
- dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
- mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
- } else {
- if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
- dev_err(mx3fb->dev, "Cannot enable channel %d\n",
- dma_chan->chan_id);
- return;
- }
-
- /* Just re-activate the same buffer */
- dma_async_issue_pending(dma_chan);
- cookie = mx3_fbi->cookie;
- dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
- mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
- }
-
- if (cookie >= 0) {
- spin_lock_irqsave(&mx3fb->lock, flags);
- sdc_fb_init(mx3_fbi);
- mx3_fbi->cookie = cookie;
- spin_unlock_irqrestore(&mx3fb->lock, flags);
- }
-
- /*
- * Attention! Without this msleep the channel keeps generating
- * interrupts. Next sdc_set_brightness() is going to be called
- * from mx3fb_blank().
- */
- msleep(2);
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ struct dma_chan *dma_chan = &ichan->dma_chan;
+ unsigned long flags;
+ dma_cookie_t cookie;
+
+ dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+ to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+
+ /* This enables the channel */
+ if (mx3_fbi->cookie < 0) {
+ mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+ &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+ if (!mx3_fbi->txd) {
+ dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+ dma_chan->chan_id);
+ return;
+ }
+
+ mx3_fbi->txd->callback_param = mx3_fbi->txd;
+ mx3_fbi->txd->callback = mx3fb_dma_done;
+
+ cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+ dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+ mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+ } else {
+ if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+ dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+ dma_chan->chan_id);
+ return;
+ }
+
+ /* Just re-activate the same buffer */
+ dma_async_issue_pending(dma_chan);
+ cookie = mx3_fbi->cookie;
+ dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+ mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+ }
+
+ if (cookie >= 0) {
+ spin_lock_irqsave(&mx3fb->lock, flags);
+ sdc_fb_init(mx3_fbi);
+ mx3_fbi->cookie = cookie;
+ spin_unlock_irqrestore(&mx3fb->lock, flags);
+ }
+
+ /*
+ * Attention! Without this msleep the channel keeps generating
+ * interrupts. Next sdc_set_brightness() is going to be called
+ * from mx3fb_blank().
+ */
+ msleep(2);
}
static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
{
- struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- uint32_t enabled;
- unsigned long flags;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ uint32_t enabled;
+ unsigned long flags;
- spin_lock_irqsave(&mx3fb->lock, flags);
+ spin_lock_irqsave(&mx3fb->lock, flags);
- enabled = sdc_fb_uninit(mx3_fbi);
+ enabled = sdc_fb_uninit(mx3_fbi);
- spin_unlock_irqrestore(&mx3fb->lock, flags);
+ spin_unlock_irqrestore(&mx3fb->lock, flags);
- mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
- mx3_fbi->txd = NULL;
- mx3_fbi->cookie = -EINVAL;
+ mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+ mx3_fbi->txd = NULL;
+ mx3_fbi->cookie = -EINVAL;
}
/**
* sdc_set_window_pos() - set window position of the respective plane.
- * @mx3fb: mx3fb context.
- * @channel: IPU DMAC channel ID.
- * @x_pos: X coordinate relative to the top left corner to place window at.
- * @y_pos: Y coordinate relative to the top left corner to place window at.
- * @return: 0 on success or negative error code on failure.
+ * @mx3fb: mx3fb context.
+ * @channel: IPU DMAC channel ID.
+ * @x_pos: X coordinate relative to the top left corner to place window at.
+ * @y_pos: Y coordinate relative to the top left corner to place window at.
+ * @return: 0 on success or negative error code on failure.
*/
static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
- int16_t x_pos, int16_t y_pos)
+ int16_t x_pos, int16_t y_pos)
{
- x_pos += mx3fb->h_start_width;
- y_pos += mx3fb->v_start_width;
+ x_pos += mx3fb->h_start_width;
+ y_pos += mx3fb->v_start_width;
- if (channel != IDMAC_SDC_0)
- return -EINVAL;
+ if (channel != IDMAC_SDC_0)
+ return -EINVAL;
- mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
- return 0;
+ mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+ return 0;
}
/**
* sdc_init_panel() - initialize a synchronous LCD panel.
- * @mx3fb: mx3fb context.
- * @panel: panel type.
- * @pixel_clk: desired pixel clock frequency in Hz.
- * @width: width of panel in pixels.
- * @height: height of panel in pixels.
- * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
- * @h_start_width: number of pixel clocks between the HSYNC signal pulse
- * and the start of valid data.
- * @h_sync_width: width of the HSYNC signal in units of pixel clocks.
- * @h_end_width: number of pixel clocks between the end of valid data
- * and the HSYNC signal for next line.
- * @v_start_width: number of lines between the VSYNC signal pulse and the
- * start of valid data.
- * @v_sync_width: width of the VSYNC signal in units of lines
- * @v_end_width: number of lines between the end of valid data and the
- * VSYNC signal for next frame.
- * @sig: bitfield of signal polarities for LCD interface.
- * @return: 0 on success or negative error code on failure.
+ * @mx3fb: mx3fb context.
+ * @panel: panel type.
+ * @pixel_clk: desired pixel clock frequency in Hz.
+ * @width: width of panel in pixels.
+ * @height: height of panel in pixels.
+ * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width: number of pixel clocks between the HSYNC signal pulse
+ * and the start of valid data.
+ * @h_sync_width: width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width: number of pixel clocks between the end of valid data
+ * and the HSYNC signal for next line.
+ * @v_start_width: number of lines between the VSYNC signal pulse and the
+ * start of valid data.
+ * @v_sync_width: width of the VSYNC signal in units of lines
+ * @v_end_width: number of lines between the end of valid data and the
+ * VSYNC signal for next frame.
+ * @sig: bitfield of signal polarities for LCD interface.
+ * @return: 0 on success or negative error code on failure.
*/
static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
- uint32_t pixel_clk,
- uint16_t width, uint16_t height,
- enum pixel_fmt pixel_fmt,
- uint16_t h_start_width, uint16_t h_sync_width,
- uint16_t h_end_width, uint16_t v_start_width,
- uint16_t v_sync_width, uint16_t v_end_width,
- struct ipu_di_signal_cfg sig)
+ uint32_t pixel_clk,
+ uint16_t width, uint16_t height,
+ enum pixel_fmt pixel_fmt,
+ uint16_t h_start_width, uint16_t h_sync_width,
+ uint16_t h_end_width, uint16_t v_start_width,
+ uint16_t v_sync_width, uint16_t v_end_width,
+ struct ipu_di_signal_cfg sig)
{
- unsigned long lock_flags;
- uint32_t reg;
- uint32_t old_conf;
- uint32_t div;
- struct clk *ipu_clk;
+ unsigned long lock_flags;
+ uint32_t reg;
+ uint32_t old_conf;
+ uint32_t div;
+ struct clk *ipu_clk;
- dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+ dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
- if (v_sync_width == 0 || h_sync_width == 0)
- return -EINVAL;
+ if (v_sync_width == 0 || h_sync_width == 0)
+ return -EINVAL;
- /* Init panel size and blanking periods */
- reg = ((uint32_t) (h_sync_width - 1) << 26) |
- ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
- mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+ /* Init panel size and blanking periods */
+ reg = ((uint32_t) (h_sync_width - 1) << 26) |
+ ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+ mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
#ifdef DEBUG
- printk(KERN_CONT " hor_conf %x,", reg);
+ printk(KERN_CONT " hor_conf %x,", reg);
#endif
- reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
- ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
- mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+ reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+ ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+ mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
#ifdef DEBUG
- printk(KERN_CONT " ver_conf %x\n", reg);
+ printk(KERN_CONT " ver_conf %x\n", reg);
#endif
- mx3fb->h_start_width = h_start_width;
- mx3fb->v_start_width = v_start_width;
-
- switch (panel) {
- case IPU_PANEL_SHARP_TFT:
- mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
- mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
- mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
- break;
- case IPU_PANEL_TFT:
- mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
- break;
- default:
- return -EINVAL;
- }
-
- /* Init clocking */
-
- /*
- * Calculate divider: fractional part is 4 bits so simply multiple by
- * 24 to get fractional part, as long as we stay under ~250MHz and on
- * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
- */
- dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
-
- ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
- div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
- clk_put(ipu_clk);
-
- if (div < 0x40) { /* Divider less than 4 */
- dev_dbg(mx3fb->dev,
- "InitPanel() - Pixel clock divider less than 4\n");
- div = 0x40;
- }
-
- spin_lock_irqsave(&mx3fb->lock, lock_flags);
-
- /*
- * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
- * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
- * debug. DISP3_IF_CLK_UP_WR is 0
- */
- mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
-
- /* DI settings */
- old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
- old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
- sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
- sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
- mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
-
- old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
- old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
- sig.clk_pol << DI_D3_CLK_POL_SHIFT |
- sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
- sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
- sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
- mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
-
- switch (pixel_fmt) {
- case IPU_PIX_FMT_RGB24:
- mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
- mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
- ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
- break;
- case IPU_PIX_FMT_RGB666:
- mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
- mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
- ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
- break;
- case IPU_PIX_FMT_BGR666:
- mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
- mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
- ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
- break;
- default:
- mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
- mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
- ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
- break;
- }
-
- spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
-
- dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
- mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
- dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
- mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
- dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
- mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
-
- return 0;
+ mx3fb->h_start_width = h_start_width;
+ mx3fb->v_start_width = v_start_width;
+
+ switch (panel) {
+ case IPU_PANEL_SHARP_TFT:
+ mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+ mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+ mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ case IPU_PANEL_TFT:
+ mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Init clocking */
+
+ /*
+ * Calculate divider: fractional part is 4 bits so simply multiple by
+ * 2^4 to get fractional part, as long as we stay under ~250MHz and on
+ * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+ */
+ dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+
+ ipu_clk = clk_get(mx3fb->dev, NULL);
+ div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+ clk_put(ipu_clk);
+
+ if (div < 0x40) { /* Divider less than 4 */
+ dev_dbg(mx3fb->dev,
+ "InitPanel() - Pixel clock divider less than 4\n");
+ div = 0x40;
+ }
+
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+ /*
+ * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+ * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+ * debug. DISP3_IF_CLK_UP_WR is 0
+ */
+ mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+
+ /* DI settings */
+ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+ old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+ sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+ sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+ mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+
+ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+ old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+ sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+ sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+ sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+ sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+ mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+
+ switch (pixel_fmt) {
+ case IPU_PIX_FMT_RGB24:
+ mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ case IPU_PIX_FMT_RGB666:
+ mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ case IPU_PIX_FMT_BGR666:
+ mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ default:
+ mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ }
+
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+ dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+ dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+ dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+
+ return 0;
}
/**
* sdc_set_color_key() - set the transparent color key for SDC graphic plane.
- * @mx3fb: mx3fb context.
- * @channel: IPU DMAC channel ID.
- * @enable: boolean to enable or disable color keyl.
- * @color_key: 24-bit RGB color to use as transparent color key.
- * @return: 0 on success or negative error code on failure.
+ * @mx3fb: mx3fb context.
+ * @channel: IPU DMAC channel ID.
+ * @enable: boolean to enable or disable color keyl.
+ * @color_key: 24-bit RGB color to use as transparent color key.
+ * @return: 0 on success or negative error code on failure.
*/
static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
- bool enable, uint32_t color_key)
+ bool enable, uint32_t color_key)
{
- uint32_t reg, sdc_conf;
- unsigned long lock_flags;
+ uint32_t reg, sdc_conf;
+ unsigned long lock_flags;
- spin_lock_irqsave(&mx3fb->lock, lock_flags);
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
- sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- if (channel == IDMAC_SDC_0)
- sdc_conf &= ~SDC_COM_GWSEL;
- else
- sdc_conf |= SDC_COM_GWSEL;
+ sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ if (channel == IDMAC_SDC_0)
+ sdc_conf &= ~SDC_COM_GWSEL;
+ else
+ sdc_conf |= SDC_COM_GWSEL;
- if (enable) {
- reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
- mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
- SDC_GW_CTRL);
+ if (enable) {
+ reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+ mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+ SDC_GW_CTRL);
- sdc_conf |= SDC_COM_KEY_COLOR_G;
- } else {
- sdc_conf &= ~SDC_COM_KEY_COLOR_G;
- }
- mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+ sdc_conf |= SDC_COM_KEY_COLOR_G;
+ } else {
+ sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+ }
+ mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
- spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
- return 0;
+ return 0;
}
/**
* sdc_set_global_alpha() - set global alpha blending modes.
- * @mx3fb: mx3fb context.
- * @enable: boolean to enable or disable global alpha blending. If disabled,
- * per pixel blending is used.
- * @alpha: global alpha value.
- * @return: 0 on success or negative error code on failure.
+ * @mx3fb: mx3fb context.
+ * @enable: boolean to enable or disable global alpha blending. If disabled,
+ * per pixel blending is used.
+ * @alpha: global alpha value.
+ * @return: 0 on success or negative error code on failure.
*/
static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
{
- uint32_t reg;
- unsigned long lock_flags;
+ uint32_t reg;
+ unsigned long lock_flags;
- spin_lock_irqsave(&mx3fb->lock, lock_flags);
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
- if (enable) {
- reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
- mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+ if (enable) {
+ reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+ mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
- reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
- } else {
- reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
- }
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+ } else {
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+ }
- spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
- return 0;
+ return 0;
}
static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
{
- /* This might be board-specific */
- mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
- return;
+ /* This might be board-specific */
+ mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+ return;
}
static uint32_t bpp_to_pixfmt(int bpp)
{
- uint32_t pixfmt = 0;
- switch (bpp) {
- case 24:
- pixfmt = IPU_PIX_FMT_BGR24;
- break;
- case 32:
- pixfmt = IPU_PIX_FMT_BGR32;
- break;
- case 16:
- pixfmt = IPU_PIX_FMT_RGB565;
- break;
- }
- return pixfmt;
+ uint32_t pixfmt = 0;
+ switch (bpp) {
+ case 24:
+ pixfmt = IPU_PIX_FMT_BGR24;
+ break;
+ case 32:
+ pixfmt = IPU_PIX_FMT_BGR32;
+ break;
+ case 16:
+ pixfmt = IPU_PIX_FMT_RGB565;
+ break;
+ }
+ return pixfmt;
}
static int mx3fb_blank(int blank, struct fb_info *fbi);
/**
* mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
- * @info: framebuffer information pointer
- * @return: 0 on success or negative error code on failure.
+ * @info: framebuffer information pointer
+ * @return: 0 on success or negative error code on failure.
*/
static int mx3fb_set_fix(struct fb_info *fbi)
{
- struct fb_fix_screeninfo *fix = &fbi->fix;
- struct fb_var_screeninfo *var = &fbi->var;
+ struct fb_fix_screeninfo *fix = &fbi->fix;
+ struct fb_var_screeninfo *var = &fbi->var;
- strncpy(fix->id, "DISP3 BG", 8);
+ strncpy(fix->id, "DISP3 BG", 8);
- fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->accel = FB_ACCEL_NONE;
- fix->visual = FB_VISUAL_TRUECOLOR;
- fix->xpanstep = 1;
- fix->ypanstep = 1;
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
- return 0;
+ return 0;
}
static void mx3fb_dma_done(void *arg)
{
- struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
- struct dma_chan *chan = tx_desc->txd.chan;
- struct idmac_channel *ichannel = to_idmac_chan(chan);
- struct mx3fb_data *mx3fb = ichannel->client;
- struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+ struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+ struct dma_chan *chan = tx_desc->txd.chan;
+ struct idmac_channel *ichannel = to_idmac_chan(chan);
+ struct mx3fb_data *mx3fb = ichannel->client;
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
- dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+ dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
- /* We only need one interrupt, it will be re-enabled as needed */
- disable_irq(ichannel->eof_irq);
+ /* We only need one interrupt, it will be re-enabled as needed */
+ disable_irq(ichannel->eof_irq);
- complete(&mx3_fbi->flip_cmpl);
+ complete(&mx3_fbi->flip_cmpl);
}
/**
* mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi: framebuffer information pointer.
- * @return: 0 on success or negative error code on failure.
+ * @fbi: framebuffer information pointer.
+ * @return: 0 on success or negative error code on failure.
*/
static int mx3fb_set_par(struct fb_info *fbi)
{
- u32 mem_len;
- struct ipu_di_signal_cfg sig_cfg;
- enum ipu_panel mode = IPU_PANEL_TFT;
- struct mx3fb_info *mx3_fbi = fbi->par;
- struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- struct idmac_channel *ichan = mx3_fbi->idmac_channel;
- struct idmac_video_param *video = &ichan->params.video;
- struct scatterlist *sg = mx3_fbi->sg;
- size_t screen_size;
-
- dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
-
- mutex_lock(&mx3_fbi->mutex);
-
- /* Total cleanup */
- if (mx3_fbi->txd)
- sdc_disable_channel(mx3_fbi);
-
- mx3fb_set_fix(fbi);
-
- mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
- if (mem_len > fbi->fix.smem_len) {
- if (fbi->fix.smem_start)
- mx3fb_unmap_video_memory(fbi);
-
- fbi->fix.smem_len = mem_len;
- if (mx3fb_map_video_memory(fbi) < 0) {
- mutex_unlock(&mx3_fbi->mutex);
- return -ENOMEM;
- }
- }
-
- screen_size = fbi->fix.line_length * fbi->var.yres;
-
- sg_init_table(&sg[0], 1);
- sg_init_table(&sg[1], 1);
-
- sg_dma_address(&sg[0]) = fbi->fix.smem_start;
- sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
- fbi->fix.smem_len,
- offset_in_page(fbi->screen_base));
-
- if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
- memset(&sig_cfg, 0, sizeof(sig_cfg));
- if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
- sig_cfg.Hsync_pol = true;
- if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
- sig_cfg.Vsync_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_INVERT)
- sig_cfg.clk_pol = true;
- if (fbi->var.sync & FB_SYNC_DATA_INVERT)
- sig_cfg.data_pol = true;
- if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
- sig_cfg.enable_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
- sig_cfg.clkidle_en = true;
- if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
- sig_cfg.clksel_en = true;
- if (fbi->var.sync & FB_SYNC_SHARP_MODE)
- mode = IPU_PANEL_SHARP_TFT;
-
- dev_dbg(fbi->device, "pixclock = %ul Hz\n",
- (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
-
- if (sdc_init_panel(mx3fb, mode,
- (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
- fbi->var.xres, fbi->var.yres,
- (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
- IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
- fbi->var.left_margin,
- fbi->var.hsync_len,
- fbi->var.right_margin +
- fbi->var.hsync_len,
- fbi->var.upper_margin,
- fbi->var.vsync_len,
- fbi->var.lower_margin +
- fbi->var.vsync_len, sig_cfg) != 0) {
- mutex_unlock(&mx3_fbi->mutex);
- dev_err(fbi->device,
- "mx3fb: Error initializing panel.\n");
- return -EINVAL;
- }
- }
-
- sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
-
- mx3_fbi->cur_ipu_buf = 0;
-
- video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel);
- video->out_width = fbi->var.xres;
- video->out_height = fbi->var.yres;
- video->out_stride = fbi->var.xres_virtual;
-
- if (mx3_fbi->blank == FB_BLANK_UNBLANK)
- sdc_enable_channel(mx3_fbi);
-
- mutex_unlock(&mx3_fbi->mutex);
-
- return 0;
+ u32 mem_len;
+ struct ipu_di_signal_cfg sig_cfg;
+ enum ipu_panel mode = IPU_PANEL_TFT;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ struct idmac_video_param *video = &ichan->params.video;
+ struct scatterlist *sg = mx3_fbi->sg;
+ size_t screen_size;
+
+ dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ /* Total cleanup */
+ if (mx3_fbi->txd)
+ sdc_disable_channel(mx3_fbi);
+
+ mx3fb_set_fix(fbi);
+
+ mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+ if (mem_len > fbi->fix.smem_len) {
+ if (fbi->fix.smem_start)
+ mx3fb_unmap_video_memory(fbi);
+
+ fbi->fix.smem_len = mem_len;
+ if (mx3fb_map_video_memory(fbi) < 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ return -ENOMEM;
+ }
+ }
+
+ screen_size = fbi->fix.line_length * fbi->var.yres;
+
+ sg_init_table(&sg[0], 1);
+ sg_init_table(&sg[1], 1);
+
+ sg_dma_address(&sg[0]) = fbi->fix.smem_start;
+ sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+ fbi->fix.smem_len,
+ offset_in_page(fbi->screen_base));
+
+ if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+ memset(&sig_cfg, 0, sizeof(sig_cfg));
+ if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ sig_cfg.Hsync_pol = true;
+ if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ sig_cfg.Vsync_pol = true;
+ if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ sig_cfg.clk_pol = true;
+ if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+ sig_cfg.data_pol = true;
+ if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ sig_cfg.enable_pol = true;
+ if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+ sig_cfg.clkidle_en = true;
+ if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+ sig_cfg.clksel_en = true;
+ if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+ mode = IPU_PANEL_SHARP_TFT;
+
+ dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+ (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+ if (sdc_init_panel(mx3fb, mode,
+ (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+ fbi->var.xres, fbi->var.yres,
+ (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+ IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+ fbi->var.left_margin,
+ fbi->var.hsync_len,
+ fbi->var.right_margin +
+ fbi->var.hsync_len,
+ fbi->var.upper_margin,
+ fbi->var.vsync_len,
+ fbi->var.lower_margin +
+ fbi->var.vsync_len, sig_cfg) != 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ dev_err(fbi->device,
+ "mx3fb: Error initializing panel.\n");
+ return -EINVAL;
+ }
+ }
+
+ sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+
+ mx3_fbi->cur_ipu_buf = 0;
+
+ video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel);
+ video->out_width = fbi->var.xres;
+ video->out_height = fbi->var.yres;
+ video->out_stride = fbi->var.xres_virtual;
+
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+ sdc_enable_channel(mx3_fbi);
+
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return 0;
}
/**
* mx3fb_check_var() - check and adjust framebuffer variable parameters.
- * @var: framebuffer variable parameters
- * @fbi: framebuffer information pointer
+ * @var: framebuffer variable parameters
+ * @fbi: framebuffer information pointer
*/
static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
- struct mx3fb_info *mx3_fbi = fbi->par;
- u32 vtotal;
- u32 htotal;
-
- dev_dbg(fbi->device, "%s\n", __func__);
-
- if (var->xres_virtual < var->xres)
- var->xres_virtual = var->xres;
- if (var->yres_virtual < var->yres)
- var->yres_virtual = var->yres;
-
- if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
- (var->bits_per_pixel != 16))
- var->bits_per_pixel = default_bpp;
-
- switch (var->bits_per_pixel) {
- case 16:
- var->red.length = 5;
- var->red.offset = 11;
- var->red.msb_right = 0;
-
- var->green.length = 6;
- var->green.offset = 5;
- var->green.msb_right = 0;
-
- var->blue.length = 5;
- var->blue.offset = 0;
- var->blue.msb_right = 0;
-
- var->transp.length = 0;
- var->transp.offset = 0;
- var->transp.msb_right = 0;
- break;
- case 24:
- var->red.length = 8;
- var->red.offset = 16;
- var->red.msb_right = 0;
-
- var->green.length = 8;
- var->green.offset = 8;
- var->green.msb_right = 0;
-
- var->blue.length = 8;
- var->blue.offset = 0;
- var->blue.msb_right = 0;
-
- var->transp.length = 0;
- var->transp.offset = 0;
- var->transp.msb_right = 0;
- break;
- case 32:
- var->red.length = 8;
- var->red.offset = 16;
- var->red.msb_right = 0;
-
- var->green.length = 8;
- var->green.offset = 8;
- var->green.msb_right = 0;
-
- var->blue.length = 8;
- var->blue.offset = 0;
- var->blue.msb_right = 0;
-
- var->transp.length = 8;
- var->transp.offset = 24;
- var->transp.msb_right = 0;
- break;
- }
-
- if (var->pixclock < 1000) {
- htotal = var->xres + var->right_margin + var->hsync_len +
- var->left_margin;
- vtotal = var->yres + var->lower_margin + var->vsync_len +
- var->upper_margin;
- var->pixclock = (vtotal * htotal * 6UL) / 100UL;
- var->pixclock = KHZ2PICOS(var->pixclock);
- dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
- var->pixclock);
- }
-
- var->height = -1;
- var->width = -1;
- var->grayscale = 0;
-
- /* Preserve sync flags */
- var->sync |= mx3_fbi->sync;
- mx3_fbi->sync |= var->sync;
-
- return 0;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 vtotal;
+ u32 htotal;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+ (var->bits_per_pixel != 16))
+ var->bits_per_pixel = default_bpp;
+
+ switch (var->bits_per_pixel) {
+ case 16:
+ var->red.length = 5;
+ var->red.offset = 11;
+ var->red.msb_right = 0;
+
+ var->green.length = 6;
+ var->green.offset = 5;
+ var->green.msb_right = 0;
+
+ var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 24:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 32:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 8;
+ var->transp.offset = 24;
+ var->transp.msb_right = 0;
+ break;
+ }
+
+ if (var->pixclock < 1000) {
+ htotal = var->xres + var->right_margin + var->hsync_len +
+ var->left_margin;
+ vtotal = var->yres + var->lower_margin + var->vsync_len +
+ var->upper_margin;
+ var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+ var->pixclock = KHZ2PICOS(var->pixclock);
+ dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+ var->pixclock);
+ }
+
+ var->height = -1;
+ var->width = -1;
+ var->grayscale = 0;
+
+ /* Preserve sync flags */
+ var->sync |= mx3_fbi->sync;
+ mx3_fbi->sync |= var->sync;
+
+ return 0;
}
static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
{
- chan &= 0xffff;
- chan >>= 16 - bf->length;
- return chan << bf->offset;
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
}
static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
- unsigned int green, unsigned int blue,
- unsigned int trans, struct fb_info *fbi)
+ unsigned int green, unsigned int blue,
+ unsigned int trans, struct fb_info *fbi)
{
- struct mx3fb_info *mx3_fbi = fbi->par;
- u32 val;
- int ret = 1;
-
- dev_dbg(fbi->device, "%s\n", __func__);
-
- mutex_lock(&mx3_fbi->mutex);
- /*
- * If greyscale is true, then we convert the RGB value
- * to greyscale no matter what visual we are using.
- */
- if (fbi->var.grayscale)
- red = green = blue = (19595 * red + 38470 * green +
- 7471 * blue) >> 16;
- switch (fbi->fix.visual) {
- case FB_VISUAL_TRUECOLOR:
- /*
- * 16-bit True Colour. We encode the RGB value
- * according to the RGB bitfield information.
- */
- if (regno < 16) {
- u32 *pal = fbi->pseudo_palette;
-
- val = chan_to_field(red, &fbi->var.red);
- val |= chan_to_field(green, &fbi->var.green);
- val |= chan_to_field(blue, &fbi->var.blue);
-
- pal[regno] = val;
-
- ret = 0;
- }
- break;
-
- case FB_VISUAL_STATIC_PSEUDOCOLOR:
- case FB_VISUAL_PSEUDOCOLOR:
- break;
- }
- mutex_unlock(&mx3_fbi->mutex);
-
- return ret;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 val;
+ int ret = 1;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ mutex_lock(&mx3_fbi->mutex);
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (fbi->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+ switch (fbi->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ /*
+ * 16-bit True Colour. We encode the RGB value
+ * according to the RGB bitfield information.
+ */
+ if (regno < 16) {
+ u32 *pal = fbi->pseudo_palette;
+
+ val = chan_to_field(red, &fbi->var.red);
+ val |= chan_to_field(green, &fbi->var.green);
+ val |= chan_to_field(blue, &fbi->var.blue);
+
+ pal[regno] = val;
+
+ ret = 0;
+ }
+ break;
+
+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ break;
+ }
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return ret;
}
/**
*/
static int mx3fb_blank(int blank, struct fb_info *fbi)
{
- struct mx3fb_info *mx3_fbi = fbi->par;
- struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-
- dev_dbg(fbi->device, "%s\n", __func__);
-
- dev_dbg(fbi->device, "blank = %d\n", blank);
-
- if (mx3_fbi->blank == blank)
- return 0;
-
- mutex_lock(&mx3_fbi->mutex);
- mx3_fbi->blank = blank;
-
- switch (blank) {
- case FB_BLANK_POWERDOWN:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_NORMAL:
- sdc_disable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, 0);
- break;
- case FB_BLANK_UNBLANK:
- sdc_enable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, mx3fb->backlight_level);
- break;
- }
- mutex_unlock(&mx3_fbi->mutex);
-
- return 0;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ dev_dbg(fbi->device, "blank = %d\n", blank);
+
+ if (mx3_fbi->blank == blank)
+ return 0;
+
+ mutex_lock(&mx3_fbi->mutex);
+ mx3_fbi->blank = blank;
+
+ switch (blank) {
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ sdc_disable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, 0);
+ break;
+ case FB_BLANK_UNBLANK:
+ sdc_enable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+ break;
+ }
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return 0;
}
/**
* mx3fb_pan_display() - pan or wrap the display
- * @var: variable screen buffer information.
- * @info: framebuffer information pointer.
+ * @var: variable screen buffer information.
+ * @info: framebuffer information pointer.
*
* We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
*/
static int mx3fb_pan_display(struct fb_var_screeninfo *var,
- struct fb_info *fbi)
+ struct fb_info *fbi)
{
- struct mx3fb_info *mx3_fbi = fbi->par;
- u32 y_bottom;
- unsigned long base;
- off_t offset;
- dma_cookie_t cookie;
- struct scatterlist *sg = mx3_fbi->sg;
- struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
- struct dma_async_tx_descriptor *txd;
- int ret;
-
- dev_dbg(fbi->device, "%s [%c]\n", __func__,
- list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
-
- if (var->xoffset > 0) {
- dev_dbg(fbi->device, "x panning not supported\n");
- return -EINVAL;
- }
-
- if (fbi->var.xoffset == var->xoffset &&
- fbi->var.yoffset == var->yoffset)
- return 0; /* No change, do nothing */
-
- y_bottom = var->yoffset;
-
- if (!(var->vmode & FB_VMODE_YWRAP))
- y_bottom += var->yres;
-
- if (y_bottom > fbi->var.yres_virtual)
- return -EINVAL;
-
- mutex_lock(&mx3_fbi->mutex);
-
- offset = (var->yoffset * var->xres_virtual + var->xoffset) *
- (var->bits_per_pixel / 8);
- base = fbi->fix.smem_start + offset;
-
- dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
- mx3_fbi->cur_ipu_buf, base);
-
- /*
- * We enable the End of Frame interrupt, which will free a tx-descriptor,
- * which we will need for the next device_prep_slave_sg(). The
- * IRQ-handler will disable the IRQ again.
- */
- init_completion(&mx3_fbi->flip_cmpl);
- enable_irq(mx3_fbi->idmac_channel->eof_irq);
-
- ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
- if (ret <= 0) {
- mutex_unlock(&mx3_fbi->mutex);
- dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
- "user interrupt" : "timeout");
- return ret ? : -ETIMEDOUT;
- }
-
- mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
-
- sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
- sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
- virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
- offset_in_page(fbi->screen_base + offset));
-
- txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
- mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
- if (!txd) {
- dev_err(fbi->device,
- "Error preparing a DMA transaction descriptor.\n");
- mutex_unlock(&mx3_fbi->mutex);
- return -EIO;
- }
-
- txd->callback_param = txd;
- txd->callback = mx3fb_dma_done;
-
- /*
- * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
- * should switch to another buffer
- */
- cookie = txd->tx_submit(txd);
- dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
- if (cookie < 0) {
- dev_err(fbi->device,
- "Error updating SDC buf %d to address=0x%08lX\n",
- mx3_fbi->cur_ipu_buf, base);
- mutex_unlock(&mx3_fbi->mutex);
- return -EIO;
- }
-
- if (mx3_fbi->txd)
- async_tx_ack(mx3_fbi->txd);
- mx3_fbi->txd = txd;
-
- fbi->var.xoffset = var->xoffset;
- fbi->var.yoffset = var->yoffset;
-
- if (var->vmode & FB_VMODE_YWRAP)
- fbi->var.vmode |= FB_VMODE_YWRAP;
- else
- fbi->var.vmode &= ~FB_VMODE_YWRAP;
-
- mutex_unlock(&mx3_fbi->mutex);
-
- dev_dbg(fbi->device, "Update complete\n");
-
- return 0;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 y_bottom;
+ unsigned long base;
+ off_t offset;
+ dma_cookie_t cookie;
+ struct scatterlist *sg = mx3_fbi->sg;
+ struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+ struct dma_async_tx_descriptor *txd;
+ int ret;
+
+ dev_dbg(fbi->device, "%s [%c]\n", __func__,
+ list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+
+ if (var->xoffset > 0) {
+ dev_dbg(fbi->device, "x panning not supported\n");
+ return -EINVAL;
+ }
+
+ if (fbi->var.xoffset == var->xoffset &&
+ fbi->var.yoffset == var->yoffset)
+ return 0; /* No change, do nothing */
+
+ y_bottom = var->yoffset;
+
+ if (!(var->vmode & FB_VMODE_YWRAP))
+ y_bottom += var->yres;
+
+ if (y_bottom > fbi->var.yres_virtual)
+ return -EINVAL;
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+ (var->bits_per_pixel / 8);
+ base = fbi->fix.smem_start + offset;
+
+ dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+ mx3_fbi->cur_ipu_buf, base);
+
+ /*
+ * We enable the End of Frame interrupt, which will free a tx-descriptor,
+ * which we will need for the next device_prep_slave_sg(). The
+ * IRQ-handler will disable the IRQ again.
+ */
+ init_completion(&mx3_fbi->flip_cmpl);
+ enable_irq(mx3_fbi->idmac_channel->eof_irq);
+
+ ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+ if (ret <= 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+ "user interrupt" : "timeout");
+ return ret ? : -ETIMEDOUT;
+ }
+
+ mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+
+ sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+ sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+ virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+ offset_in_page(fbi->screen_base + offset));
+
+ txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+ mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+ if (!txd) {
+ dev_err(fbi->device,
+ "Error preparing a DMA transaction descriptor.\n");
+ mutex_unlock(&mx3_fbi->mutex);
+ return -EIO;
+ }
+
+ txd->callback_param = txd;
+ txd->callback = mx3fb_dma_done;
+
+ /*
+ * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+ * should switch to another buffer
+ */
+ cookie = txd->tx_submit(txd);
+ dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+ if (cookie < 0) {
+ dev_err(fbi->device,
+ "Error updating SDC buf %d to address=0x%08lX\n",
+ mx3_fbi->cur_ipu_buf, base);
+ mutex_unlock(&mx3_fbi->mutex);
+ return -EIO;
+ }
+
+ if (mx3_fbi->txd)
+ async_tx_ack(mx3_fbi->txd);
+ mx3_fbi->txd = txd;
+
+ fbi->var.xoffset = var->xoffset;
+ fbi->var.yoffset = var->yoffset;
+
+ if (var->vmode & FB_VMODE_YWRAP)
+ fbi->var.vmode |= FB_VMODE_YWRAP;
+ else
+ fbi->var.vmode &= ~FB_VMODE_YWRAP;
+
+ mutex_unlock(&mx3_fbi->mutex);
+
+ dev_dbg(fbi->device, "Update complete\n");
+
+ return 0;
}
/*
* blitting, rectangle filling, copy regions and cursor definition.
*/
static struct fb_ops mx3fb_ops = {
- .owner = THIS_MODULE,
- .fb_set_par = mx3fb_set_par,
- .fb_check_var = mx3fb_check_var,
- .fb_setcolreg = mx3fb_setcolreg,
- .fb_pan_display = mx3fb_pan_display,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
- .fb_blank = mx3fb_blank,
+ .owner = THIS_MODULE,
+ .fb_set_par = mx3fb_set_par,
+ .fb_check_var = mx3fb_check_var,
+ .fb_setcolreg = mx3fb_setcolreg,
+ .fb_pan_display = mx3fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = mx3fb_blank,
};
#ifdef CONFIG_PM
*/
static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
- acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 1);
- release_console_sem();
+ acquire_console_sem();
+ fb_set_suspend(drv_data->fbi, 1);
+ release_console_sem();
- if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
- sdc_disable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, 0);
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+ sdc_disable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, 0);
- }
- return 0;
+ }
+ return 0;
}
/*
*/
static int mx3fb_resume(struct platform_device *pdev)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
- if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
- sdc_enable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, drv_data->backlight_level);
- }
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+ sdc_enable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, drv_data->backlight_level);
+ }
- acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 0);
- release_console_sem();
+ acquire_console_sem();
+ fb_set_suspend(drv_data->fbi, 0);
+ release_console_sem();
- return 0;
+ return 0;
}
#else
#define mx3fb_suspend NULL
/**
* mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
- * @fbi: framebuffer information pointer
- * @return: Error code indicating success or failure
+ * @fbi: framebuffer information pointer
+ * @return: Error code indicating success or failure
*
* This buffer is remapped into a non-cached, non-buffered, memory region to
* allow palette and pixel writes to occur without flushing the cache. Once this
*/
static int mx3fb_map_video_memory(struct fb_info *fbi)
{
- int retval = 0;
- dma_addr_t addr;
+ int retval = 0;
+ dma_addr_t addr;
- fbi->screen_base = dma_alloc_writecombine(fbi->device,
- fbi->fix.smem_len,
- &addr, GFP_DMA);
+ fbi->screen_base = dma_alloc_writecombine(fbi->device,
+ fbi->fix.smem_len,
+ &addr, GFP_DMA);
- if (!fbi->screen_base) {
- dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
- fbi->fix.smem_len);
- retval = -EBUSY;
- goto err0;
- }
+ if (!fbi->screen_base) {
+ dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+ fbi->fix.smem_len);
+ retval = -EBUSY;
+ goto err0;
+ }
- fbi->fix.smem_start = addr;
+ fbi->fix.smem_start = addr;
- dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
- (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+ dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+ (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
- fbi->screen_size = fbi->fix.smem_len;
+ fbi->screen_size = fbi->fix.smem_len;
- /* Clear the screen */
- memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+ /* Clear the screen */
+ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
- return 0;
+ return 0;
err0:
- fbi->fix.smem_len = 0;
- fbi->fix.smem_start = 0;
- fbi->screen_base = NULL;
- return retval;
+ fbi->fix.smem_len = 0;
+ fbi->fix.smem_start = 0;
+ fbi->screen_base = NULL;
+ return retval;
}
/**
* mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
- * @fbi: framebuffer information pointer
- * @return: error code indicating success or failure
+ * @fbi: framebuffer information pointer
+ * @return: error code indicating success or failure
*/
static int mx3fb_unmap_video_memory(struct fb_info *fbi)
{
- dma_free_writecombine(fbi->device, fbi->fix.smem_len,
- fbi->screen_base, fbi->fix.smem_start);
+ dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+ fbi->screen_base, fbi->fix.smem_start);
- fbi->screen_base = 0;
- fbi->fix.smem_start = 0;
- fbi->fix.smem_len = 0;
- return 0;
+ fbi->screen_base = 0;
+ fbi->fix.smem_start = 0;
+ fbi->fix.smem_len = 0;
+ return 0;
}
/**
* mx3fb_init_fbinfo() - initialize framebuffer information object.
- * @return: initialized framebuffer structure.
+ * @return: initialized framebuffer structure.
*/
static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
{
- struct fb_info *fbi;
- struct mx3fb_info *mx3fbi;
- int ret;
+ struct fb_info *fbi;
+ struct mx3fb_info *mx3fbi;
+ int ret;
- /* Allocate sufficient memory for the fb structure */
- fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
- if (!fbi)
- return NULL;
+ /* Allocate sufficient memory for the fb structure */
+ fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+ if (!fbi)
+ return NULL;
- mx3fbi = fbi->par;
- mx3fbi->cookie = -EINVAL;
- mx3fbi->cur_ipu_buf = 0;
+ mx3fbi = fbi->par;
+ mx3fbi->cookie = -EINVAL;
+ mx3fbi->cur_ipu_buf = 0;
- fbi->var.activate = FB_ACTIVATE_NOW;
+ fbi->var.activate = FB_ACTIVATE_NOW;
- fbi->fbops = ops;
- fbi->flags = FBINFO_FLAG_DEFAULT;
- fbi->pseudo_palette = mx3fbi->pseudo_palette;
+ fbi->fbops = ops;
+ fbi->flags = FBINFO_FLAG_DEFAULT;
+ fbi->pseudo_palette = mx3fbi->pseudo_palette;
- mutex_init(&mx3fbi->mutex);
+ mutex_init(&mx3fbi->mutex);
- /* Allocate colormap */
- ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
- if (ret < 0) {
- framebuffer_release(fbi);
- return NULL;
- }
+ /* Allocate colormap */
+ ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+ if (ret < 0) {
+ framebuffer_release(fbi);
+ return NULL;
+ }
- return fbi;
+ return fbi;
}
static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
{
- struct device *dev = mx3fb->dev;
- struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
- const char *name = mx3fb_pdata->name;
- unsigned int irq;
- struct fb_info *fbi;
- struct mx3fb_info *mx3fbi;
- const struct fb_videomode *mode;
- int ret, num_modes;
+ struct device *dev = mx3fb->dev;
+ struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+ const char *name = mx3fb_pdata->name;
+ unsigned int irq;
+ struct fb_info *fbi;
+ struct mx3fb_info *mx3fbi;
+ const struct fb_videomode *mode;
+ int ret, num_modes;
- ichan->client = mx3fb;
- irq = ichan->eof_irq;
+ ichan->client = mx3fb;
+ irq = ichan->eof_irq;
- if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
- return -EINVAL;
+ if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+ return -EINVAL;
- fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
- if (!fbi)
- return -ENOMEM;
+ fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+ if (!fbi)
+ return -ENOMEM;
- if (!fb_mode)
- fb_mode = name;
+ if (!fb_mode)
+ fb_mode = name;
- if (!fb_mode) {
- ret = -EINVAL;
- goto emode;
- }
+ if (!fb_mode) {
+ ret = -EINVAL;
+ goto emode;
+ }
- if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
- mode = mx3fb_pdata->mode;
- num_modes = mx3fb_pdata->num_modes;
- } else {
- mode = mx3fb_modedb;
- num_modes = ARRAY_SIZE(mx3fb_modedb);
- }
+ if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
- if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
- num_modes, NULL, default_bpp)) {
- ret = -EBUSY;
- goto emode;
- }
+ if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+ num_modes, NULL, default_bpp)) {
+ ret = -EBUSY;
+ goto emode;
+ }
- fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+ fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
- /* Default Y virtual size is 2x panel size */
- fbi->var.yres_virtual = fbi->var.yres * 2;
+ /* Default Y virtual size is 2x panel size */
+ fbi->var.yres_virtual = fbi->var.yres * 2;
- mx3fb->fbi = fbi;
+ mx3fb->fbi = fbi;
- /* set Display Interface clock period */
- mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
- /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+ /* set Display Interface clock period */
+ mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+ /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
- sdc_set_brightness(mx3fb, 255);
- sdc_set_global_alpha(mx3fb, true, 0xFF);
- sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+ sdc_set_brightness(mx3fb, 255);
+ sdc_set_global_alpha(mx3fb, true, 0xFF);
+ sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
- mx3fbi = fbi->par;
- mx3fbi->idmac_channel = ichan;
- mx3fbi->ipu_ch = ichan->dma_chan.chan_id;
- mx3fbi->mx3fb = mx3fb;
- mx3fbi->blank = FB_BLANK_NORMAL;
+ mx3fbi = fbi->par;
+ mx3fbi->idmac_channel = ichan;
+ mx3fbi->ipu_ch = ichan->dma_chan.chan_id;
+ mx3fbi->mx3fb = mx3fb;
+ mx3fbi->blank = FB_BLANK_NORMAL;
- init_completion(&mx3fbi->flip_cmpl);
- disable_irq(ichan->eof_irq);
- dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
- ret = mx3fb_set_par(fbi);
- if (ret < 0)
- goto esetpar;
+ init_completion(&mx3fbi->flip_cmpl);
+ disable_irq(ichan->eof_irq);
+ dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+ ret = mx3fb_set_par(fbi);
+ if (ret < 0)
+ goto esetpar;
- mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+ mx3fb_blank(FB_BLANK_UNBLANK, fbi);
- dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+ dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
- ret = register_framebuffer(fbi);
- if (ret < 0)
- goto erfb;
+ ret = register_framebuffer(fbi);
+ if (ret < 0)
+ goto erfb;
- return 0;
+ return 0;
erfb:
esetpar:
emode:
- fb_dealloc_cmap(&fbi->cmap);
- framebuffer_release(fbi);
+ fb_dealloc_cmap(&fbi->cmap);
+ framebuffer_release(fbi);
- return ret;
+ return ret;
}
static bool chan_filter(struct dma_chan *chan, void *arg)
{
- struct dma_chan_request *rq = arg;
- struct device *dev;
- struct mx3fb_platform_data *mx3fb_pdata;
+ struct dma_chan_request *rq = arg;
+ struct device *dev;
+ struct mx3fb_platform_data *mx3fb_pdata;
- if (!rq)
- return false;
+ if (!rq)
+ return false;
- dev = rq->mx3fb->dev;
- mx3fb_pdata = dev->platform_data;
+ dev = rq->mx3fb->dev;
+ mx3fb_pdata = dev->platform_data;
- return rq->id == chan->chan_id &&
- mx3fb_pdata->dma_dev == chan->device->dev;
+ return rq->id == chan->chan_id &&
+ mx3fb_pdata->dma_dev == chan->device->dev;
}
static void release_fbi(struct fb_info *fbi)
{
- mx3fb_unmap_video_memory(fbi);
+ mx3fb_unmap_video_memory(fbi);
- fb_dealloc_cmap(&fbi->cmap);
+ fb_dealloc_cmap(&fbi->cmap);
- unregister_framebuffer(fbi);
- framebuffer_release(fbi);
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
}
static int mx3fb_probe(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- int ret;
- struct resource *sdc_reg;
- struct mx3fb_data *mx3fb;
- dma_cap_mask_t mask;
- struct dma_chan *chan;
- struct dma_chan_request rq;
-
- /*
- * Display Interface (DI) and Synchronous Display Controller (SDC)
- * registers
- */
- sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!sdc_reg)
- return -EINVAL;
-
- mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
- if (!mx3fb)
- return -ENOMEM;
-
- spin_lock_init(&mx3fb->lock);
-
- mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
- if (!mx3fb->reg_base) {
- ret = -ENOMEM;
- goto eremap;
- }
-
- pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
- mx3fb->reg_base);
-
- /* IDMAC interface */
- dmaengine_get();
-
- mx3fb->dev = dev;
- platform_set_drvdata(pdev, mx3fb);
-
- rq.mx3fb = mx3fb;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_cap_set(DMA_PRIVATE, mask);
- rq.id = IDMAC_SDC_0;
- chan = dma_request_channel(mask, chan_filter, &rq);
- if (!chan) {
- ret = -EBUSY;
- goto ersdc0;
- }
-
- ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
- if (ret < 0)
- goto eisdc0;
-
- mx3fb->backlight_level = 255;
-
- return 0;
+ struct device *dev = &pdev->dev;
+ int ret;
+ struct resource *sdc_reg;
+ struct mx3fb_data *mx3fb;
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct dma_chan_request rq;
+
+ /*
+ * Display Interface (DI) and Synchronous Display Controller (SDC)
+ * registers
+ */
+ sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!sdc_reg)
+ return -EINVAL;
+
+ mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+ if (!mx3fb)
+ return -ENOMEM;
+
+ spin_lock_init(&mx3fb->lock);
+
+ mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+ if (!mx3fb->reg_base) {
+ ret = -ENOMEM;
+ goto eremap;
+ }
+
+ pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+ mx3fb->reg_base);
+
+ /* IDMAC interface */
+ dmaengine_get();
+
+ mx3fb->dev = dev;
+ platform_set_drvdata(pdev, mx3fb);
+
+ rq.mx3fb = mx3fb;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dma_cap_set(DMA_PRIVATE, mask);
+ rq.id = IDMAC_SDC_0;
+ chan = dma_request_channel(mask, chan_filter, &rq);
+ if (!chan) {
+ ret = -EBUSY;
+ goto ersdc0;
+ }
+
+ ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+ if (ret < 0)
+ goto eisdc0;
+
+ mx3fb->backlight_level = 255;
+
+ return 0;
eisdc0:
- dma_release_channel(chan);
+ dma_release_channel(chan);
ersdc0:
- dmaengine_put();
- iounmap(mx3fb->reg_base);
+ dmaengine_put();
+ iounmap(mx3fb->reg_base);
eremap:
- kfree(mx3fb);
- dev_err(dev, "mx3fb: failed to register fb\n");
- return ret;
+ kfree(mx3fb);
+ dev_err(dev, "mx3fb: failed to register fb\n");
+ return ret;
}
static int mx3fb_remove(struct platform_device *dev)
{
- struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
- struct fb_info *fbi = mx3fb->fbi;
- struct mx3fb_info *mx3_fbi = fbi->par;
- struct dma_chan *chan;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+ struct fb_info *fbi = mx3fb->fbi;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct dma_chan *chan;
- chan = &mx3_fbi->idmac_channel->dma_chan;
- release_fbi(fbi);
+ chan = &mx3_fbi->idmac_channel->dma_chan;
+ release_fbi(fbi);
- dma_release_channel(chan);
- dmaengine_put();
+ dma_release_channel(chan);
+ dmaengine_put();
- iounmap(mx3fb->reg_base);
- kfree(mx3fb);
- return 0;
+ iounmap(mx3fb->reg_base);
+ kfree(mx3fb);
+ return 0;
}
static struct platform_driver mx3fb_driver = {
- .driver = {
- .name = MX3FB_NAME,
- },
- .probe = mx3fb_probe,
- .remove = mx3fb_remove,
- .suspend = mx3fb_suspend,
- .resume = mx3fb_resume,
+ .driver = {
+ .name = MX3FB_NAME,
+ },
+ .probe = mx3fb_probe,
+ .remove = mx3fb_remove,
+ .suspend = mx3fb_suspend,
+ .resume = mx3fb_resume,
};
/*
* Parse user specified options (`video=mx3fb:')
* example:
- * video=mx3fb:bpp=16
+ * video=mx3fb:bpp=16
*/
static int mx3fb_setup(void)
{
#ifndef MODULE
- char *opt, *options = NULL;
-
- if (fb_get_options("mx3fb", &options))
- return -ENODEV;
-
- if (!options || !*options)
- return 0;
-
- while ((opt = strsep(&options, ",")) != NULL) {
- if (!*opt)
- continue;
- if (!strncmp(opt, "bpp=", 4))
- default_bpp = simple_strtoul(opt + 4, NULL, 0);
- else
- fb_mode = opt;
- }
+ char *opt, *options = NULL;
+
+ if (fb_get_options("mx3fb", &options))
+ return -ENODEV;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ if (!strncmp(opt, "bpp=", 4))
+ default_bpp = simple_strtoul(opt + 4, NULL, 0);
+ else
+ fb_mode = opt;
+ }
#endif
- return 0;
+ return 0;
}
static int __init mx3fb_init(void)
{
- int ret = mx3fb_setup();
+ int ret = mx3fb_setup();
- if (ret < 0)
- return ret;
+ if (ret < 0)
+ return ret;
- ret = platform_driver_register(&mx3fb_driver);
- return ret;
+ ret = platform_driver_register(&mx3fb_driver);
+ return ret;
}
static void __exit mx3fb_exit(void)
{
- platform_driver_unregister(&mx3fb_driver);
+ platform_driver_unregister(&mx3fb_driver);
}
module_init(mx3fb_init);
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/div64.h>
-#include <mach/pxa-regs.h>
#include <mach/bitfield.h>
#include <mach/pxafb.h>
init_completion(&ofb->branch_done);
}
+static inline int pxafb_overlay_supported(void)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa3xx())
+ return 1;
+
+ return 0;
+}
+
static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
{
int i, ret;
+ if (!pxafb_overlay_supported())
+ return 0;
+
for (i = 0; i < 2; i++) {
init_pxafb_overlay(fbi, &fbi->overlay[i], i);
ret = register_framebuffer(&fbi->overlay[i].fb);
{
int i;
+ if (!pxafb_overlay_supported())
+ return;
+
for (i = 0; i < 2; i++)
unregister_framebuffer(&fbi->overlay[i].fb);
}
s3c2410fb_init_registers(fbinfo);
+ /* re-activate our display after resume */
+ s3c2410fb_activate_var(fbinfo);
+ s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);
+
return 0;
}
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <mach/assabet.h>
#include <mach/shannon.h>
#endif
#endif
-#ifdef CONFIG_SA1100_H3800
-static struct sa1100fb_mach_info h3800_info __initdata = {
- .pixclock = 174757, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 3, .vsync_len = 3,
- .left_margin = 12, .upper_margin = 10,
- .right_margin = 17, .lower_margin = 1,
-
- .cmap_static = 1,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
#ifdef CONFIG_SA1100_H3600
static struct sa1100fb_mach_info h3600_info __initdata = {
.pixclock = 174757, .bpp = 16,
fbi->rgb[RGB_16] = &h3600_rgb_16;
}
#endif
-#ifdef CONFIG_SA1100_H3800
- if (machine_is_h3800()) {
- inf = &h3800_info;
- }
-#endif
#ifdef CONFIG_SA1100_COLLIE
if (machine_is_collie()) {
inf = &collie_info;
if (!mdev)
return -ENOMEM;
- mdev->clk = clk_get(&pdev->dev, "owire_clk");
+ mdev->clk = clk_get(&pdev->dev, "owire");
if (!mdev->clk) {
err = -ENODEV;
goto failed_clk;
}
/* get interface & functional clock objects */
- hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick");
- hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck");
+ hdq_data->hdq_ick = clk_get(&pdev->dev, "ick");
+ hdq_data->hdq_fck = clk_get(&pdev->dev, "fck");
if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) {
dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n");
void __iomem *base; /* physical */
struct device *dev;
int omap_wdt_users;
- struct clk *armwdt_ck;
- struct clk *mpu_wdt_ick;
- struct clk *mpu_wdt_fck;
+ struct clk *ick;
+ struct clk *fck;
struct resource *mem;
struct miscdevice omap_wdt_miscdev;
};
if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users)))
return -EBUSY;
- if (cpu_is_omap16xx())
- clk_enable(wdev->armwdt_ck); /* Enable the clock */
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- clk_enable(wdev->mpu_wdt_ick); /* Enable the interface clock */
- clk_enable(wdev->mpu_wdt_fck); /* Enable the functional clock */
- }
+ clk_enable(wdev->ick); /* Enable the interface clock */
+ clk_enable(wdev->fck); /* Enable the functional clock */
/* initialize prescaler */
while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
omap_wdt_disable(wdev);
- if (cpu_is_omap16xx())
- clk_disable(wdev->armwdt_ck); /* Disable the clock */
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- clk_disable(wdev->mpu_wdt_ick); /* Disable the clock */
- clk_disable(wdev->mpu_wdt_fck); /* Disable the clock */
- }
+ clk_disable(wdev->ick);
+ clk_disable(wdev->fck);
#else
printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n");
#endif
wdev->omap_wdt_users = 0;
wdev->mem = mem;
- if (cpu_is_omap16xx()) {
- wdev->armwdt_ck = clk_get(&pdev->dev, "armwdt_ck");
- if (IS_ERR(wdev->armwdt_ck)) {
- ret = PTR_ERR(wdev->armwdt_ck);
- wdev->armwdt_ck = NULL;
- goto err_clk;
- }
+ wdev->ick = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(wdev->ick)) {
+ ret = PTR_ERR(wdev->ick);
+ wdev->ick = NULL;
+ goto err_clk;
}
-
- if (cpu_is_omap24xx()) {
- wdev->mpu_wdt_ick = clk_get(&pdev->dev, "mpu_wdt_ick");
- if (IS_ERR(wdev->mpu_wdt_ick)) {
- ret = PTR_ERR(wdev->mpu_wdt_ick);
- wdev->mpu_wdt_ick = NULL;
- goto err_clk;
- }
- wdev->mpu_wdt_fck = clk_get(&pdev->dev, "mpu_wdt_fck");
- if (IS_ERR(wdev->mpu_wdt_fck)) {
- ret = PTR_ERR(wdev->mpu_wdt_fck);
- wdev->mpu_wdt_fck = NULL;
- goto err_clk;
- }
+ wdev->fck = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(wdev->fck)) {
+ ret = PTR_ERR(wdev->fck);
+ wdev->fck = NULL;
+ goto err_clk;
}
- if (cpu_is_omap34xx()) {
- wdev->mpu_wdt_ick = clk_get(&pdev->dev, "wdt2_ick");
- if (IS_ERR(wdev->mpu_wdt_ick)) {
- ret = PTR_ERR(wdev->mpu_wdt_ick);
- wdev->mpu_wdt_ick = NULL;
- goto err_clk;
- }
- wdev->mpu_wdt_fck = clk_get(&pdev->dev, "wdt2_fck");
- if (IS_ERR(wdev->mpu_wdt_fck)) {
- ret = PTR_ERR(wdev->mpu_wdt_fck);
- wdev->mpu_wdt_fck = NULL;
- goto err_clk;
- }
- }
wdev->base = ioremap(res->start, res->end - res->start + 1);
if (!wdev->base) {
ret = -ENOMEM;
wdev->base = NULL;
err_clk:
- if (wdev->armwdt_ck)
- clk_put(wdev->armwdt_ck);
- if (wdev->mpu_wdt_ick)
- clk_put(wdev->mpu_wdt_ick);
- if (wdev->mpu_wdt_fck)
- clk_put(wdev->mpu_wdt_fck);
+ if (wdev->ick)
+ clk_put(wdev->ick);
+ if (wdev->fck)
+ clk_put(wdev->fck);
kfree(wdev);
err_kzalloc:
release_mem_region(res->start, res->end - res->start + 1);
platform_set_drvdata(pdev, NULL);
- if (wdev->armwdt_ck) {
- clk_put(wdev->armwdt_ck);
- wdev->armwdt_ck = NULL;
- }
-
- if (wdev->mpu_wdt_ick) {
- clk_put(wdev->mpu_wdt_ick);
- wdev->mpu_wdt_ick = NULL;
- }
-
- if (wdev->mpu_wdt_fck) {
- clk_put(wdev->mpu_wdt_fck);
- wdev->mpu_wdt_fck = NULL;
- }
+ clk_put(wdev->ick);
+ clk_put(wdev->fck);
iounmap(wdev->base);
kfree(wdev);
#include <linux/timex.h>
#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
#endif
#include <mach/reset.h>
--- /dev/null
+/*
+ * broadsheetfb.h - definitions for the broadsheet framebuffer driver
+ *
+ * Copyright (C) 2008 by Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#ifndef _LINUX_BROADSHEETFB_H_
+#define _LINUX_BROADSHEETFB_H_
+
+/* Broadsheet command defines */
+#define BS_CMD_INIT_SYS_RUN 0x06
+#define BS_CMD_INIT_DSPE_CFG 0x09
+#define BS_CMD_INIT_DSPE_TMG 0x0A
+#define BS_CMD_INIT_ROTMODE 0x0B
+#define BS_CMD_RD_REG 0x10
+#define BS_CMD_WR_REG 0x11
+#define BS_CMD_LD_IMG 0x20
+#define BS_CMD_LD_IMG_AREA 0x22
+#define BS_CMD_LD_IMG_END 0x23
+#define BS_CMD_WAIT_DSPE_TRG 0x28
+#define BS_CMD_WAIT_DSPE_FREND 0x29
+#define BS_CMD_RD_WFM_INFO 0x30
+#define BS_CMD_UPD_INIT 0x32
+#define BS_CMD_UPD_FULL 0x33
+#define BS_CMD_UPD_GDRV_CLR 0x37
+
+/* Broadsheet pin interface specific defines */
+#define BS_CS 0x01
+#define BS_DC 0x02
+#define BS_WR 0x03
+
+/* struct used by broadsheet. board specific stuff comes from *board */
+struct broadsheetfb_par {
+ struct fb_info *info;
+ struct broadsheet_board *board;
+ void (*write_reg)(struct broadsheetfb_par *, u16 reg, u16 val);
+ u16 (*read_reg)(struct broadsheetfb_par *, u16 reg);
+ wait_queue_head_t waitq;
+};
+
+/* board specific routines */
+struct broadsheet_board {
+ struct module *owner;
+ int (*init)(struct broadsheetfb_par *);
+ int (*wait_for_rdy)(struct broadsheetfb_par *);
+ void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
+ void (*set_hdb)(struct broadsheetfb_par *, u16);
+ u16 (*get_hdb)(struct broadsheetfb_par *);
+ void (*cleanup)(struct broadsheetfb_par *);
+ int (*get_panel_type)(void);
+ int (*setup_irq)(struct fb_info *);
+};
+
+#endif
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS && !PPC
+ select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
select KALLSYMS
select KALLSYMS_ALL
static DECLARE_WAIT_QUEUE_HEAD(pkmap_map_wait);
+/*
+ * Most architectures have no use for kmap_high_get(), so let's abstract
+ * the disabling of IRQ out of the locking in that case to save on a
+ * potential useless overhead.
+ */
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
+#define lock_kmap() spin_lock_irq(&kmap_lock)
+#define unlock_kmap() spin_unlock_irq(&kmap_lock)
+#define lock_kmap_any(flags) spin_lock_irqsave(&kmap_lock, flags)
+#define unlock_kmap_any(flags) spin_unlock_irqrestore(&kmap_lock, flags)
+#else
+#define lock_kmap() spin_lock(&kmap_lock)
+#define unlock_kmap() spin_unlock(&kmap_lock)
+#define lock_kmap_any(flags) \
+ do { spin_lock(&kmap_lock); (void)(flags); } while (0)
+#define unlock_kmap_any(flags) \
+ do { spin_unlock(&kmap_lock); (void)(flags); } while (0)
+#endif
+
static void flush_all_zero_pkmaps(void)
{
int i;
*/
void kmap_flush_unused(void)
{
- spin_lock(&kmap_lock);
+ lock_kmap();
flush_all_zero_pkmaps();
- spin_unlock(&kmap_lock);
+ unlock_kmap();
}
static inline unsigned long map_new_virtual(struct page *page)
__set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&pkmap_map_wait, &wait);
- spin_unlock(&kmap_lock);
+ unlock_kmap();
schedule();
remove_wait_queue(&pkmap_map_wait, &wait);
- spin_lock(&kmap_lock);
+ lock_kmap();
/* Somebody else might have mapped it while we slept */
if (page_address(page))
* For highmem pages, we can't trust "virtual" until
* after we have the lock.
*/
- spin_lock(&kmap_lock);
+ lock_kmap();
vaddr = (unsigned long)page_address(page);
if (!vaddr)
vaddr = map_new_virtual(page);
pkmap_count[PKMAP_NR(vaddr)]++;
BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 2);
- spin_unlock(&kmap_lock);
+ unlock_kmap();
return (void*) vaddr;
}
EXPORT_SYMBOL(kmap_high);
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
+/**
+ * kmap_high_get - pin a highmem page into memory
+ * @page: &struct page to pin
+ *
+ * Returns the page's current virtual memory address, or NULL if no mapping
+ * exists. When and only when a non null address is returned then a
+ * matching call to kunmap_high() is necessary.
+ *
+ * This can be called from any context.
+ */
+void *kmap_high_get(struct page *page)
+{
+ unsigned long vaddr, flags;
+
+ lock_kmap_any(flags);
+ vaddr = (unsigned long)page_address(page);
+ if (vaddr) {
+ BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 1);
+ pkmap_count[PKMAP_NR(vaddr)]++;
+ }
+ unlock_kmap_any(flags);
+ return (void*) vaddr;
+}
+#endif
+
/**
* kunmap_high - map a highmem page into memory
* @page: &struct page to unmap
+ *
+ * If ARCH_NEEDS_KMAP_HIGH_GET is not defined then this may be called
+ * only from user context.
*/
void kunmap_high(struct page *page)
{
unsigned long vaddr;
unsigned long nr;
+ unsigned long flags;
int need_wakeup;
- spin_lock(&kmap_lock);
+ lock_kmap_any(flags);
vaddr = (unsigned long)page_address(page);
BUG_ON(!vaddr);
nr = PKMAP_NR(vaddr);
*/
need_wakeup = waitqueue_active(&pkmap_map_wait);
}
- spin_unlock(&kmap_lock);
+ unlock_kmap_any(flags);
/* do wake-up, if needed, race-free outside of the spin lock */
if (need_wakeup)
#include <sound/pxa2xx-lib.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
#include <mach/regs-ac97.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/audio.h>
#include <sound/initval.h>
#include <sound/pxa2xx-lib.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
#include <mach/audio.h>
#include <sound/pcm_params.h>
#include <sound/pxa2xx-lib.h>
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include "pxa2xx-pcm.h"
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/corgi.h>
#include <mach/audio.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"
#include <asm/mach-types.h>
#include <asm/hardware/locomo.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/poodle.h>
#include <mach/audio.h>
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/regs-ssp.h>
#include <mach/audio.h>
#include <mach/ssp.h>
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
+#include <mach/dma.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/audio.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/spitz.h>
#include "../codecs/wm8750.h"
#include "pxa2xx-pcm.h"
#include <asm/mach-types.h>
#include <mach/tosa.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"
projects / linux-2.6-omap-h63xx.git / commitdiff