* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: use the new byteorder headers
fbcon: Protect free_irq() by MACH_IS_ATARI check
fbcon: remove broken mac vbl handler
m68k: fix trigraph ignored warning in setox.S
macfb annotations and compiler warning fix
m68k: mac baboon interrupt enable/disable
m68k: machw.h cleanup
m68k: Mac via cleanup and commentry
m68k: Reinstate mac rtc
| depending on their values, the program may run faster or slower --
| but no worse than 10% slower even in the extreme cases.
|
-| The program setoxm1 takes approximately ???/??? cycles for input
+| The program setoxm1 takes approximately ??? / ??? cycles for input
| argument X, 0.25 <= |X| < 70log2. For |X| < 0.25, it takes
-| approximately ???/??? cycles. For the less common arguments,
+| approximately ??? / ??? cycles. For the less common arguments,
| depending on their values, the program may run faster or slower --
| but no worse than 10% slower even in the extreme cases.
|
#include <asm/macints.h>
#include <asm/mac_baboon.h>
-/* #define DEBUG_BABOON */
/* #define DEBUG_IRQS */
+extern void mac_enable_irq(unsigned int);
+extern void mac_disable_irq(unsigned int);
+
int baboon_present;
static volatile struct baboon *baboon;
+static unsigned char baboon_disabled;
#if 0
extern int macide_ack_intr(struct ata_channel *);
void __init baboon_register_interrupts(void)
{
- request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
- "baboon", (void *) baboon);
+ baboon_disabled = 0;
+ request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon);
}
-void baboon_irq_enable(int irq) {
+/*
+ * The means for masking individual baboon interrupts remains a mystery, so
+ * enable the umbrella interrupt only when no baboon interrupt is disabled.
+ */
+
+void baboon_irq_enable(int irq)
+{
+ int irq_idx = IRQ_IDX(irq);
+
#ifdef DEBUG_IRQUSE
printk("baboon_irq_enable(%d)\n", irq);
#endif
- /* FIXME: figure out how to mask and unmask baboon interrupt sources */
- enable_irq(IRQ_NUBUS_C);
+
+ baboon_disabled &= ~(1 << irq_idx);
+ if (!baboon_disabled)
+ mac_enable_irq(IRQ_NUBUS_C);
}
-void baboon_irq_disable(int irq) {
+void baboon_irq_disable(int irq)
+{
+ int irq_idx = IRQ_IDX(irq);
+
#ifdef DEBUG_IRQUSE
printk("baboon_irq_disable(%d)\n", irq);
#endif
- disable_irq(IRQ_NUBUS_C);
+
+ baboon_disabled |= 1 << irq_idx;
+ if (baboon_disabled)
+ mac_disable_irq(IRQ_NUBUS_C);
}
-void baboon_irq_clear(int irq) {
- int irq_idx = IRQ_IDX(irq);
+void baboon_irq_clear(int irq)
+{
+ int irq_idx = IRQ_IDX(irq);
baboon->mb_ifr &= ~(1 << irq_idx);
}
int baboon_irq_pending(int irq)
{
- int irq_idx = IRQ_IDX(irq);
+ int irq_idx = IRQ_IDX(irq);
return baboon->mb_ifr & (1 << irq_idx);
}
mach_init_IRQ = mac_init_IRQ;
mach_get_model = mac_get_model;
mach_gettimeoffset = mac_gettimeoffset;
-#warning move to adb/via init
-#if 0
mach_hwclk = mac_hwclk;
-#endif
mach_set_clock_mmss = mac_set_clock_mmss;
mach_reset = mac_reset;
mach_halt = mac_poweroff;
#define BOOTINFO_COMPAT_1_0
#include <asm/setup.h>
#include <asm/bootinfo.h>
-#include <asm/machw.h>
#include <asm/macints.h>
extern unsigned long mac_videobase;
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/bootinfo.h>
-#include <asm/machw.h>
#include <asm/macintosh.h>
#include <asm/mac_via.h>
#include <asm/mac_psc.h>
/* #define DEBUG_MACINTS */
-static void mac_enable_irq(unsigned int irq);
-static void mac_disable_irq(unsigned int irq);
+void mac_enable_irq(unsigned int irq);
+void mac_disable_irq(unsigned int irq);
static struct irq_controller mac_irq_controller = {
.name = "mac",
* These routines are just dispatchers to the VIA/OSS/PSC routines.
*/
-static void mac_enable_irq(unsigned int irq)
+void mac_enable_irq(unsigned int irq)
{
int irq_src = IRQ_SRC(irq);
}
}
-static void mac_disable_irq(unsigned int irq)
+void mac_disable_irq(unsigned int irq)
{
int irq_src = IRQ_SRC(irq);
#define cuda_write_pram NULL
#endif
-#ifdef CONFIG_ADB_PMU68K
+#if 0 /* def CONFIG_ADB_PMU68K */
static long pmu_read_time(void)
{
struct adb_request req;
#define pmu_write_pram NULL
#endif
-#ifdef CONFIG_ADB_MACIISI
+#if 0 /* def CONFIG_ADB_MACIISI */
extern int maciisi_request(struct adb_request *req,
void (*done)(struct adb_request *), int nbytes, ...);
unmktime(now, 0,
&t->tm_year, &t->tm_mon, &t->tm_mday,
&t->tm_hour, &t->tm_min, &t->tm_sec);
+#if 0
printk("mac_hwclk: read %04d-%02d-%-2d %02d:%02d:%02d\n",
- t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
+ t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
+ t->tm_hour, t->tm_min, t->tm_sec);
+#endif
} else { /* write */
+#if 0
printk("mac_hwclk: tried to write %04d-%02d-%-2d %02d:%02d:%02d\n",
- t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
+ t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
+ t->tm_hour, t->tm_min, t->tm_sec);
+#endif
-#if 0 /* it trashes my rtc */
now = mktime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
t->tm_hour, t->tm_min, t->tm_sec);
case MAC_ADB_IISI:
maciisi_write_time(now);
}
-#endif
}
return 0;
}
#include <linux/init.h>
#include <asm/bootinfo.h>
-#include <asm/machw.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_via.h>
#include <asm/bootinfo.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
-#include <asm/machw.h>
#include <asm/mac_via.h>
#include <asm/mac_psc.h>
volatile __u8 *via1, *via2;
-#if 0
-/* See note in mac_via.h about how this is possibly not useful */
-volatile long *via_memory_bogon=(long *)&via_memory_bogon;
-#endif
int rbv_present;
int via_alt_mapping;
EXPORT_SYMBOL(via_alt_mapping);
#define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF)
#define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8)
-/* To disable a NuBus slot on Quadras we make the slot IRQ lines outputs, set
+/* To disable a NuBus slot on Quadras we make that slot IRQ line an output set
* high. On RBV we just use the slot interrupt enable register. On Macs with
* genuine VIA chips we must use nubus_disabled to keep track of disabled slot
* interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1
via1[vT1CH] = 0;
via1[vT2CL] = 0;
via1[vT2CH] = 0;
- via1[vACR] &= 0x3F;
+ via1[vACR] &= ~0xC0; /* setup T1 timer with no PB7 output */
via1[vACR] &= ~0x03; /* disable port A & B latches */
/*
/* Everything below this point is VIA2/RBV only... */
- if (oss_present) return;
+ if (oss_present)
+ return;
-#if 1
/* Some machines support an alternate IRQ mapping that spreads */
/* Ethernet and Sound out to their own autolevel IRQs and moves */
/* VIA1 to level 6. A/UX uses this mapping and we do too. Note */
/* that the IIfx emulates this alternate mapping using the OSS. */
- switch(macintosh_config->ident) {
- case MAC_MODEL_P475:
- case MAC_MODEL_P475F:
- case MAC_MODEL_P575:
- case MAC_MODEL_Q605:
- case MAC_MODEL_Q605_ACC:
- case MAC_MODEL_C610:
- case MAC_MODEL_Q610:
- case MAC_MODEL_Q630:
- case MAC_MODEL_C650:
- case MAC_MODEL_Q650:
- case MAC_MODEL_Q700:
- case MAC_MODEL_Q800:
- case MAC_MODEL_Q900:
- case MAC_MODEL_Q950:
+ via_alt_mapping = 0;
+ if (macintosh_config->via_type == MAC_VIA_QUADRA)
+ switch (macintosh_config->ident) {
+ case MAC_MODEL_C660:
+ case MAC_MODEL_Q840:
+ /* not applicable */
+ break;
+ case MAC_MODEL_P588:
+ case MAC_MODEL_TV:
+ case MAC_MODEL_PB140:
+ case MAC_MODEL_PB145:
+ case MAC_MODEL_PB160:
+ case MAC_MODEL_PB165:
+ case MAC_MODEL_PB165C:
+ case MAC_MODEL_PB170:
+ case MAC_MODEL_PB180:
+ case MAC_MODEL_PB180C:
+ case MAC_MODEL_PB190:
+ case MAC_MODEL_PB520:
+ /* not yet tested */
+ break;
+ default:
via_alt_mapping = 1;
via1[vDirB] |= 0x40;
via1[vBufB] &= ~0x40;
break;
- default:
- via_alt_mapping = 0;
- break;
- }
-#else
- via_alt_mapping = 0;
-#endif
+ }
/*
* Now initialize VIA2. For RBV we just kill all interrupts;
via2[vT1CH] = 0;
via2[vT2CL] = 0;
via2[vT2CH] = 0;
- via2[vACR] &= 0x3F;
+ via2[vACR] &= ~0xC0; /* setup T1 timer with no PB7 output */
via2[vACR] &= ~0x03; /* disable port A & B latches */
}
/*
- * Set vPCR for SCSI interrupts (but not on RBV)
+ * Set vPCR for control line interrupts (but not on RBV)
*/
if (!rbv_present) {
+ /* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ)
+ * are made negative edge triggered here.
+ */
if (macintosh_config->scsi_type == MAC_SCSI_OLD) {
/* CB2 (IRQ) indep. input, positive edge */
/* CA2 (DRQ) indep. input, positive edge */
++irq_num;
irq_bit <<= 1;
} while (events >= irq_bit);
-
-#if 0 /* freakin' pmu is doing weird stuff */
- if (!oss_present) {
- /* This (still) seems to be necessary to get IDE
- working. However, if you enable VBL interrupts,
- you're screwed... */
- /* FIXME: should we check the SLOTIRQ bit before
- pulling this stunt? */
- /* No, it won't be set. that's why we're doing this. */
- via_irq_disable(IRQ_MAC_NUBUS);
- via_irq_clear(IRQ_MAC_NUBUS);
- m68k_handle_int(IRQ_MAC_NUBUS);
- via_irq_enable(IRQ_MAC_NUBUS);
- }
-#endif
return IRQ_HANDLED;
}
#include <linux/delay.h>
#include <linux/ide.h>
-#include <asm/machw.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_baboon.h>
#else
#include <asm/macintosh.h>
#include <asm/macints.h>
-#include <asm/machw.h>
#include <asm/mac_via.h>
#endif
#include <asm/io.h>
#include <linux/init.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
-#include <asm/machw.h>
#include <asm/mac_via.h>
#include <asm/system.h>
#include <linux/interrupt.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
-#include <asm/machw.h>
#include <asm/mac_via.h>
static volatile unsigned char *via;
#include <asm/macintosh.h>
#include <asm/macints.h>
-#include <asm/machw.h>
#include <asm/mac_via.h>
#include <asm/pgtable.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
-#include <asm/machw.h>
#include <asm/mac_via.h>
#include "scsi.h"
#ifdef CONFIG_ATARI
#include <asm/atariints.h>
#endif
-#ifdef CONFIG_MAC
-#include <asm/macints.h>
-#endif
#if defined(__mc68000__)
#include <asm/machdep.h>
#include <asm/setup.h>
/* # VBL ints between cursor state changes */
#define ATARI_CURSOR_BLINK_RATE (42)
-#define MAC_CURSOR_BLINK_RATE (32)
-#define DEFAULT_CURSOR_BLINK_RATE (20)
static int vbl_cursor_cnt;
static int fbcon_cursor_noblink;
static void fbcon_exit(void);
static struct device *fbcon_device;
-#ifdef CONFIG_MAC
-/*
- * On the Macintoy, there may or may not be a working VBL int. We need to probe
- */
-static int vbl_detected;
-
-static irqreturn_t fb_vbl_detect(int irq, void *dummy)
-{
- vbl_detected++;
- return IRQ_HANDLED;
-}
-#endif
-
#ifdef CONFIG_FRAMEBUFFER_CONSOLE_ROTATION
static inline void fbcon_set_rotation(struct fb_info *info)
{
release_console_sem();
}
-#if defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#ifdef CONFIG_ATARI
static int cursor_blink_rate;
static irqreturn_t fb_vbl_handler(int irq, void *dev_id)
{
struct fb_info *info = NULL;
struct fbcon_ops *ops;
int rows, cols;
- int irqres;
- irqres = 1;
/*
* If num_registered_fb is zero, this is a call for the dummy part.
* The frame buffer devices weren't initialized yet.
#ifdef CONFIG_ATARI
if (MACH_IS_ATARI) {
cursor_blink_rate = ATARI_CURSOR_BLINK_RATE;
- irqres =
- request_irq(IRQ_AUTO_4, fb_vbl_handler,
+ (void)request_irq(IRQ_AUTO_4, fb_vbl_handler,
IRQ_TYPE_PRIO, "framebuffer vbl",
info);
}
-#endif /* CONFIG_ATARI */
-
-#ifdef CONFIG_MAC
- /*
- * On a Macintoy, the VBL interrupt may or may not be active.
- * As interrupt based cursor is more reliable and race free, we
- * probe for VBL interrupts.
- */
- if (MACH_IS_MAC) {
- int ct = 0;
- /*
- * Probe for VBL: set temp. handler ...
- */
- irqres = request_irq(IRQ_MAC_VBL, fb_vbl_detect, 0,
- "framebuffer vbl", info);
- vbl_detected = 0;
-
- /*
- * ... and spin for 20 ms ...
- */
- while (!vbl_detected && ++ct < 1000)
- udelay(20);
-
- if (ct == 1000)
- printk
- ("fbcon_startup: No VBL detected, using timer based cursor.\n");
-
- free_irq(IRQ_MAC_VBL, fb_vbl_detect);
-
- if (vbl_detected) {
- /*
- * interrupt based cursor ok
- */
- cursor_blink_rate = MAC_CURSOR_BLINK_RATE;
- irqres =
- request_irq(IRQ_MAC_VBL, fb_vbl_handler, 0,
- "framebuffer vbl", info);
- } else {
- /*
- * VBL not detected: fall through, use timer based cursor
- */
- irqres = 1;
- }
- }
-#endif /* CONFIG_MAC */
+#endif /* CONFIG_ATARI */
fbcon_add_cursor_timer(info);
fbcon_has_exited = 0;
return;
#ifdef CONFIG_ATARI
- free_irq(IRQ_AUTO_4, fb_vbl_handler);
-#endif
-#ifdef CONFIG_MAC
- if (MACH_IS_MAC && vbl_detected)
- free_irq(IRQ_MAC_VBL, fb_vbl_handler);
+ if (MACH_IS_ATARI)
+ free_irq(IRQ_AUTO_4, fb_vbl_handler);
#endif
kfree((void *)softback_buf);
#include <asm/irq.h>
#include <asm/macintosh.h>
#include <asm/io.h>
-#include <asm/machw.h>
/* Common DAC base address for the LC, RBV, Valkyrie, and IIvx */
#define DAC_BASE 0x50f24000
unsigned int green, unsigned int blue,
struct fb_info *fb_info);
-static volatile struct {
+static struct {
unsigned char addr;
/* Note: word-aligned */
char pad[3];
unsigned char lut;
-} *valkyrie_cmap_regs;
+} __iomem *valkyrie_cmap_regs;
-static volatile struct {
+static struct {
unsigned char addr;
unsigned char lut;
-} *v8_brazil_cmap_regs;
+} __iomem *v8_brazil_cmap_regs;
-static volatile struct {
+static struct {
unsigned char addr;
char pad1[3]; /* word aligned */
unsigned char lut;
char pad2[3]; /* word aligned */
unsigned char cntl; /* a guess as to purpose */
-} *rbv_cmap_regs;
+} __iomem *rbv_cmap_regs;
-static volatile struct {
+static struct {
unsigned long reset;
unsigned long pad1[3];
unsigned char pad2[3];
unsigned char lut;
-} *dafb_cmap_regs;
+} __iomem *dafb_cmap_regs;
-static volatile struct {
+static struct {
unsigned char addr; /* OFFSET: 0x00 */
unsigned char pad1[15];
unsigned char lut; /* OFFSET: 0x10 */
unsigned char pad3[7];
unsigned long vbl_addr; /* OFFSET: 0x28 */
unsigned int status2; /* OFFSET: 0x2C */
-} *civic_cmap_regs;
+} __iomem *civic_cmap_regs;
-static volatile struct {
+static struct {
char pad1[0x40];
unsigned char clut_waddr; /* 0x40 */
char pad2;
unsigned char clut_data; /* 0x42 */
char pad3[0x3];
unsigned char clut_raddr; /* 0x46 */
-} *csc_cmap_regs;
+} __iomem *csc_cmap_regs;
/* We will leave these the way they are for the time being */
struct mdc_cmap_regs {
struct fb_info *info)
{
mdelay(1);
- csc_cmap_regs->clut_waddr = regno;
- csc_cmap_regs->clut_data = red;
- csc_cmap_regs->clut_data = green;
- csc_cmap_regs->clut_data = blue;
+ nubus_writeb(regno, &csc_cmap_regs->clut_waddr);
+ nubus_writeb(red, &csc_cmap_regs->clut_data);
+ nubus_writeb(green, &csc_cmap_regs->clut_data);
+ nubus_writeb(blue, &csc_cmap_regs->clut_data);
return 0;
}
#include <asm/types.h>
#include <linux/compiler.h>
-#ifdef __GNUC__
+#define __BIG_ENDIAN
+#define __SWAB_64_THRU_32__
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
{
__asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
return val;
}
-#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch_swab32 __arch_swab32
-#endif
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#include <linux/byteorder/big_endian.h>
+#include <linux/byteorder.h>
#endif /* _M68K_BYTEORDER_H */
#include <linux/types.h>
#if 0
-/* Mac SCSI Controller 5380 */
-
-#define MAC_5380_BAS (0x50F10000) /* This is definitely wrong!! */
-struct MAC_5380 {
- u_char scsi_data;
- u_char char_dummy1;
- u_char scsi_icr;
- u_char char_dummy2;
- u_char scsi_mode;
- u_char char_dummy3;
- u_char scsi_tcr;
- u_char char_dummy4;
- u_char scsi_idstat;
- u_char char_dummy5;
- u_char scsi_dmastat;
- u_char char_dummy6;
- u_char scsi_targrcv;
- u_char char_dummy7;
- u_char scsi_inircv;
-};
-#define mac_scsi ((*(volatile struct MAC_5380 *)MAC_5380_BAS))
-
/*
** SCC Z8530
*/
projects / linux-2.6-omap-h63xx.git / commitdiff