obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
-obj-$(CONFIG_MACH_TS209) += ts209-setup.o
-obj-$(CONFIG_MACH_TS409) += ts409-setup.o
+obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
#include <asm/arch/orion5x.h>
#include "common.h"
#include "mpp.h"
+#include "tsx09-common.h"
#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
subsys_initcall(qnap_ts209_pci_init);
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
- .phy_addr = 8,
-};
-
-static int __init parse_hex_nibble(char n)
-{
- if (n >= '0' && n <= '9')
- return n - '0';
-
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
-
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
-
- return -1;
-}
-
-static int __init parse_hex_byte(const char *b)
-{
- int hi;
- int lo;
-
- hi = parse_hex_nibble(b[0]);
- lo = parse_hex_nibble(b[1]);
-
- if (hi < 0 || lo < 0)
- return -1;
-
- return (hi << 4) | lo;
-}
-
-static int __init check_mac_addr(const char *addr_str)
-{
- u_int8_t addr[6];
- int i;
-
- for (i = 0; i < 6; i++) {
- int byte;
-
- /*
- * Enforce "xx:xx:xx:xx:xx:xx\n" format.
- */
- if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
- return -1;
-
- byte = parse_hex_byte(addr_str + (i * 3));
- if (byte < 0)
- return -1;
- addr[i] = byte;
- }
-
- printk(KERN_INFO "ts209: found ethernet mac address ");
- for (i = 0; i < 6; i++)
- printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
- memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
-
- return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n".)
- */
-static void __init ts209_find_mac_addr(void)
-{
- unsigned long addr;
-
- for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
- char *nor_page;
- int ret = 0;
-
- nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
- if (nor_page != NULL) {
- ret = check_mac_addr(nor_page);
- iounmap(nor_page);
- }
-
- if (ret == 0)
- break;
- }
-}
-
/*****************************************************************************
* RTC S35390A on I2C bus
****************************************************************************/
{ -1 },
};
-/*
- * QNAP TS-[12]09 specific power off method via UART1-attached PIC
- */
-#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts209_power_off(void)
-{
- /* 19200 baud divisor */
- const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-
- pr_info("%s: triggering power-off...\n", __func__);
-
- /* hijack uart1 and reset into sane state (19200,8n1) */
- orion5x_write(UART1_REG(LCR), 0x83);
- orion5x_write(UART1_REG(DLL), divisor & 0xff);
- orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
- orion5x_write(UART1_REG(LCR), 0x03);
- orion5x_write(UART1_REG(IER), 0x00);
- orion5x_write(UART1_REG(FCR), 0x00);
- orion5x_write(UART1_REG(MCR), 0x00);
-
- /* send the power-off command 'A' to PIC */
- orion5x_write(UART1_REG(TX), 'A');
-}
-
static void __init qnap_ts209_init(void)
{
/*
*/
orion5x_ehci0_init();
orion5x_ehci1_init();
- ts209_find_mac_addr();
- orion5x_eth_init(&qnap_ts209_eth_data);
+ qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
+ qnap_ts209_partitions[5].offset,
+ qnap_ts209_partitions[5].size);
+ orion5x_eth_init(&qnap_tsx09_eth_data);
orion5x_i2c_init();
orion5x_sata_init(&qnap_ts209_sata_data);
orion5x_uart0_init();
pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
- /* register ts209 specific power-off method */
- pm_power_off = qnap_ts209_power_off;
+ /* register tsx09 specific power-off method */
+ pm_power_off = qnap_tsx09_power_off;
}
MACHINE_START(TS209, "QNAP TS-109/TS-209")
#include <asm/arch/orion5x.h>
#include "common.h"
#include "mpp.h"
+#include "tsx09-common.h"
/*****************************************************************************
* QNAP TS-409 Info
subsys_initcall(qnap_ts409_pci_init);
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts409_eth_data = {
- .phy_addr = 8,
-};
-
-static int __init parse_hex_nibble(char n)
-{
- if (n >= '0' && n <= '9')
- return n - '0';
-
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
-
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
-
- return -1;
-}
-
-static int __init parse_hex_byte(const char *b)
-{
- int hi;
- int lo;
-
- hi = parse_hex_nibble(b[0]);
- lo = parse_hex_nibble(b[1]);
-
- if (hi < 0 || lo < 0)
- return -1;
-
- return (hi << 4) | lo;
-}
-
-static int __init check_mac_addr(const char *addr_str)
-{
- u_int8_t addr[6];
- int i;
-
- for (i = 0; i < 6; i++) {
- int byte;
-
- /*
- * Enforce "xx:xx:xx:xx:xx:xx\n" format.
- */
- if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
- return -1;
-
- byte = parse_hex_byte(addr_str + (i * 3));
- if (byte < 0)
- return -1;
- addr[i] = byte;
- }
-
- printk(KERN_INFO "ts409: found ethernet mac address ");
- for (i = 0; i < 6; i++)
- printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
- memcpy(qnap_ts409_eth_data.mac_addr, addr, 6);
-
- return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n").
- */
-static void __init ts409_find_mac_addr(void)
-{
- unsigned long addr;
-
- for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
- char *nor_page;
- int ret = 0;
-
- nor_page = ioremap(QNAP_TS409_NOR_BOOT_BASE + addr, 1024);
- if (nor_page != NULL) {
- ret = check_mac_addr(nor_page);
- iounmap(nor_page);
- }
-
- if (ret == 0)
- break;
- }
-}
-
/*****************************************************************************
* RTC S35390A on I2C bus
****************************************************************************/
{ -1 },
};
-/*
- * QNAP TS-409 specific power off method via UART1-attached PIC
- */
-
-#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts409_power_off(void)
-{
- /* 19200 baud divisor */
- const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-
- pr_info("%s: triggering power-off...\n", __func__);
-
- /* hijack uart1 and reset into sane state (19200,8n1) */
- writel(0x83, UART1_REG(LCR));
- writel(divisor & 0xff, UART1_REG(DLL));
- writel((divisor >> 8) & 0xff, UART1_REG(DLM));
- writel(0x03, UART1_REG(LCR));
- writel(0x00, UART1_REG(IER));
- writel(0x00, UART1_REG(FCR));
- writel(0x00, UART1_REG(MCR));
-
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
-}
-
static void __init qnap_ts409_init(void)
{
/*
* Configure peripherals.
*/
orion5x_ehci0_init();
- ts409_find_mac_addr();
- orion5x_eth_init(&qnap_ts409_eth_data);
+ qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
+ qnap_ts409_partitions[5].offset,
+ qnap_ts409_partitions[5].size);
+ orion5x_eth_init(&qnap_tsx09_eth_data);
orion5x_i2c_init();
orion5x_uart0_init();
pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
- /* register ts409 specific power-off method */
- pm_power_off = qnap_ts409_power_off;
+ /* register tsx09 specific power-off method */
+ pm_power_off = qnap_tsx09_power_off;
}
MACHINE_START(TS409, "QNAP TS-409")
--- /dev/null
+/*
+ * QNAP TS-x09 Boards common functions
+ *
+ * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
+ * Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/serial_reg.h>
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-x09 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx09_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack uart1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
+ .phy_addr = 8,
+};
+
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+ if (n >= '0' && n <= '9')
+ return n - '0';
+
+ if (n >= 'A' && n <= 'F')
+ return n - 'A' + 10;
+
+ if (n >= 'a' && n <= 'f')
+ return n - 'a' + 10;
+
+ return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+ int hi;
+ int lo;
+
+ hi = qnap_tsx09_parse_hex_nibble(b[0]);
+ lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+ if (hi < 0 || lo < 0)
+ return -1;
+
+ return (hi << 4) | lo;
+}
+
+static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
+{
+ u_int8_t addr[6];
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ int byte;
+
+ /*
+ * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+ */
+ if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+ return -1;
+
+ byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+ if (byte < 0)
+ return -1;
+ addr[i] = byte;
+ }
+
+ printk(KERN_INFO "tsx09: found ethernet mac address ");
+ for (i = 0; i < 6; i++)
+ printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+ memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
+
+ return 0;
+}
+
+/*
+ * The 'NAS Config' flash partition has an ext2 filesystem which
+ * contains a file that has the ethernet MAC address in plain text
+ * (format "xx:xx:xx:xx:xx:xx\n").
+ */
+void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
+{
+ unsigned long addr;
+
+ for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
+ char *nor_page;
+ int ret = 0;
+
+ nor_page = ioremap(addr, 1024);
+ if (nor_page != NULL) {
+ ret = qnap_tsx09_check_mac_addr(nor_page);
+ iounmap(nor_page);
+ }
+
+ if (ret == 0)
+ break;
+ }
+}
--- /dev/null
+#ifndef __ARCH_ORION5X_TSX09_COMMON_H
+#define __ARCH_ORION5X_TSX09_COMMON_H
+
+/*
+ * QNAP TS-x09 Boards power-off function
+ */
+extern void qnap_tsx09_power_off(void);
+
+/*
+ * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
+ */
+extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
+
+/*
+ * QNAP TS-x09 Boards ethernet declaration
+ */
+extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
+
+
+#endif
projects / linux-2.6-omap-h63xx.git / commitdiff