Blackfin arch: split board selection off into mach subdirs

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f530886362aa208c510151abfb0b165c493fd159..0db05a583c31c5909a2ac748819a20a8753f6fb3 100644 (file)
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -221,95 +221,6 @@ config BFIN_SINGLE_CORE
        depends on !BFIN_DUAL_CORE
        default y
 
-choice
-       prompt "System type"
-       default BFIN533_STAMP
-       help
-         Do NOT change the board here.  Please use the top level
-         configuration to ensure that all the other settings are
-         correct.
-
-config BFIN527_EZKIT
-       bool "BF527-EZKIT"
-       depends on (BF522 || BF525 || BF527)
-       help
-         BF533-EZKIT-LITE board Support.
-
-config BFIN533_EZKIT
-       bool "BF533-EZKIT"
-       depends on (BF533 || BF532 || BF531)
-       help
-         BF533-EZKIT-LITE board Support.
-
-config  BFIN533_STAMP
-       bool "BF533-STAMP"
-       depends on (BF533 || BF532 || BF531)
-       help
-         BF533-STAMP board Support.
-
-config BFIN537_STAMP
-       bool "BF537-STAMP"
-       depends on (BF537 || BF536 || BF534)
-       help
-         BF537-STAMP board Support.
-
-config BFIN533_BLUETECHNIX_CM
-       bool "Bluetechnix CM-BF533"
-       depends on (BF533)
-       help
-         CM-BF533 support for EVAL- and DEV-Board.
-
-config BFIN537_BLUETECHNIX_CM
-       bool "Bluetechnix CM-BF537"
-       depends on (BF537)
-       help
-         CM-BF537 support for EVAL- and DEV-Board.
-
-config BFIN548_EZKIT
-       bool "BF548-EZKIT"
-       depends on (BF548 || BF549)
-         help
-         BFIN548-EZKIT board Support.
-
-config BFIN561_BLUETECHNIX_CM
-       bool "Bluetechnix CM-BF561"
-       depends on (BF561)
-       help
-         CM-BF561 support for EVAL- and DEV-Board.
-
-config BFIN561_EZKIT
-       bool "BF561-EZKIT"
-       depends on (BF561)
-       help
-         BF561-EZKIT-LITE board Support.
-
-config BFIN561_TEPLA
-       bool "BF561-TEPLA"
-       depends on (BF561)
-       help
-        BF561-TEPLA board Support.
-
-config PNAV10
-       bool "PNAV 1.0 board"
-       depends on (BF537)
-       help
-         PNAV 1.0 board Support.
-
-config H8606_HVSISTEMAS
-        bool "HV Sistemas H8606"
-        depends on (BF532)
-        help
-          HV Sistemas H8606 board support.
-
-config GENERIC_BOARD
-       bool "Custom"
-       depends on (BF537 || BF536 \
-               || BF534 || BF561 || BF535 || BF533 || BF532 || BF531)
-       help
-         GENERIC or Custom board Support.
-
-endchoice
-
 config MEM_GENERIC_BOARD
        bool
        depends on GENERIC_BOARD

diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 50321f723dee3936239777e3d95a171ea6dcaf94..5c736837d4bfc727d720ab15ed1076544c159b43 100644 (file)
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -1,5 +1,7 @@
 if (BF52x)
 
+source "arch/blackfin/mach-bf527/boards/Kconfig"
+
 menu "BF527 Specific Configuration"
 
 comment "Alternative Multiplexing Scheme"

diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
new file mode 100644 (file)
index 0000000..6a570ad
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -0,0 +1,12 @@
+choice
+       prompt "System type"
+       default BFIN527_EZKIT
+       help
+         Select your board!
+
+config BFIN527_EZKIT
+       bool "BF527-EZKIT"
+       help
+         BF527-EZKIT-LITE board support.
+
+endchoice

diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 912ac8ebc889e525eb9b7fe41f2c33427f5f23f8..8c75ed5987b1a13a4182e77208cad42d86e6e789 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -1,7 +1,6 @@
 #
-# arch/blackfin/mach-bf532/boards/Makefile
+# arch/blackfin/mach-bf527/boards/Makefile
 #
 
-obj-y                                  += eth_mac.o
-obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
-
+obj-y                                  += eth_mac.o
+obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o

diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
index 14297b3ed5c33cde4b55de896ca219c353ffeb40..76beb75f12dadcbcca496a42bf88dea013a0795c 100644 (file)
--- a/arch/blackfin/mach-bf533/Kconfig
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -1,5 +1,7 @@
 if (BF533 || BF532 || BF531)
 
+source "arch/blackfin/mach-bf533/boards/Kconfig"
+
 menu "BF533/2/1 Specific Configuration"
 
 comment "Interrupt Priority Assignment"

diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
new file mode 100644 (file)
index 0000000..751de51
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -0,0 +1,34 @@
+choice
+       prompt "System type"
+       default BFIN533_STAMP
+       help
+         Select your board!
+
+config BFIN533_EZKIT
+       bool "BF533-EZKIT"
+       help
+         BF533-EZKIT-LITE board support.
+
+config BFIN533_STAMP
+       bool "BF533-STAMP"
+       help
+         BF533-STAMP board support.
+
+config BFIN533_BLUETECHNIX_CM
+       bool "Bluetechnix CM-BF533"
+       depends on (BF533)
+       help
+         CM-BF533 support for EVAL- and DEV-Board.
+
+config H8606_HVSISTEMAS
+       bool "HV Sistemas H8606"
+       depends on (BF532)
+       help
+         HV Sistemas H8606 board support.
+
+config GENERIC_BF533_BOARD
+       bool "Generic"
+       help
+         Generic or Custom board support.
+
+endchoice

diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 2452b456ccbd25479115b5f2002d0dc0616c1648..54f57fb9791e0c501256d30a5a99897c46170d67 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -2,7 +2,7 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BOARD)            += generic_board.o
+obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o

diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index e6648db0951931a694bd4c28c3b2b6e19889ec31..8255374c04aa5a38ceac476c3cf4d97303c42844 100644 (file)
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -1,5 +1,7 @@
 if (BF537 || BF534 || BF536)
 
+source "arch/blackfin/mach-bf537/boards/Kconfig"
+
 menu "BF537 Specific Configuration"
 
 comment "Interrupt Priority Assignment"

diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
new file mode 100644 (file)
index 0000000..96a1519
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -0,0 +1,29 @@
+choice
+       prompt "System type"
+       default BFIN537_STAMP
+       help
+         Select your board!
+
+config BFIN537_STAMP
+       bool "BF537-STAMP"
+       help
+         BF537-STAMP board support.
+
+config BFIN537_BLUETECHNIX_CM
+       bool "Bluetechnix CM-BF537"
+       depends on (BF537)
+       help
+         CM-BF537 support for EVAL- and DEV-Board.
+
+config PNAV10
+       bool "PNAV board"
+       depends on (BF537)
+       help
+         PNAV board support.
+
+config GENERIC_BF537_BOARD
+       bool "Generic"
+       help
+         Generic or Custom board support.
+
+endchoice

diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 23323cacc3aa423176a901ddafcd53dfd0459e59..a5af7b5563e600409eb62ea1a519cc740929ab7e 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -2,8 +2,8 @@
 # arch/blackfin/mach-bf537/boards/Makefile
 #
 
-obj-y                                  += eth_mac.o
-obj-$(CONFIG_GENERIC_BOARD)            += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP)            += stamp.o led.o
-obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
-obj-$(CONFIG_PNAV10)                   += pnav10.o
+obj-y                                  += eth_mac.o
+obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
+obj-$(CONFIG_BFIN537_STAMP)            += stamp.o led.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
+obj-$(CONFIG_PNAV10)                   += pnav10.o

diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index 08d8dc83701c3e7cb3d279f757358155fba662f7..d8bd3b49f150275cf5e32ccbd0c0cfbf648d4e65 100644 (file)
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -1,5 +1,7 @@
 if (BF54x)
 
+source "arch/blackfin/mach-bf548/boards/Kconfig"
+
 menu "BF548 Specific Configuration"
 
 config DEB_DMA_URGENT

diff --git a/arch/blackfin/mach-bf548/boards/Kconfig b/arch/blackfin/mach-bf548/boards/Kconfig
new file mode 100644 (file)
index 0000000..0571290
--- /dev/null
+++ b/arch/blackfin/mach-bf548/boards/Kconfig
@@ -0,0 +1,12 @@
+choice
+       prompt "System type"
+       default BFIN548_EZKIT
+       help
+         Select your board!
+
+config BFIN548_EZKIT
+       bool "BF548-EZKIT"
+       help
+         BFIN548-EZKIT board support.
+
+endchoice

diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
index 486e07c99a515fcb5dcd4be9ca83f88ef02bdc6c..a444cc739578bc8f286a4b06ee7fb74a79ae4d59 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/Makefile
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -2,4 +2,4 @@
 # arch/blackfin/mach-bf548/boards/Makefile
 #
 
-obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o led.o

diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig
index 0a17c4cf0059708aaa5052e992c7fda60b6e4468..3f4895450bea0286fcbbe8b5b8b512cb9c8a1434 100644 (file)
--- a/arch/blackfin/mach-bf561/Kconfig
+++ b/arch/blackfin/mach-bf561/Kconfig
@@ -1,4 +1,6 @@
-if BF561
+if (BF561)
+
+source "arch/blackfin/mach-bf561/boards/Kconfig"
 
 menu "BF561 Specific Configuration"
 

diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
new file mode 100644 (file)
index 0000000..e41a67b
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -0,0 +1,27 @@
+choice
+       prompt "System type"
+       default BFIN561_EZKIT
+       help
+         Select your board!
+
+config BFIN561_EZKIT
+       bool "BF561-EZKIT"
+       help
+         BF561-EZKIT-LITE board support.
+
+config BFIN561_TEPLA
+       bool "BF561-TEPLA"
+       help
+        BF561-TEPLA board support.
+
+config BFIN561_BLUETECHNIX_CM
+       bool "Bluetechnix CM-BF561"
+       help
+         CM-BF561 support for EVAL- and DEV-Board.
+
+config GENERIC_BF561_BOARD
+       bool "Generic"
+       help
+         Generic or Custom board support.
+
+endchoice

diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 495a1cf9d4529dc04ab81e0dcd77d840d84cd8b8..04add010b568459da6d324afd87bf4ae46d40b55 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,7 +2,7 @@
 # arch/blackfin/mach-bf561/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BOARD)            += generic_board.o
+obj-$(CONFIG_GENERIC_BF561_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
 obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o