count -= scnt; buf += scnt;
if (!wptr) return -EINVAL;
if (debugifc_match_keyword(wptr,wlen,"fetch")) {
- pvr2_hdw_cpufw_set_enabled(hdw,!0);
+ scnt = debugifc_isolate_word(buf,count,&wptr,&wlen);
+ if (scnt && wptr) {
+ count -= scnt; buf += scnt;
+ if (debugifc_match_keyword(wptr,wlen,"prom")) {
+ pvr2_hdw_cpufw_set_enabled(hdw,!0,!0);
+ } else if (debugifc_match_keyword(wptr,wlen,
+ "ram")) {
+ pvr2_hdw_cpufw_set_enabled(hdw,0,!0);
+ } else {
+ return -EINVAL;
+ }
+ }
+ pvr2_hdw_cpufw_set_enabled(hdw,0,!0);
return 0;
} else if (debugifc_match_keyword(wptr,wlen,"done")) {
- pvr2_hdw_cpufw_set_enabled(hdw,0);
+ pvr2_hdw_cpufw_set_enabled(hdw,0,0);
return 0;
} else {
return -EINVAL;
} while (0); LOCK_GIVE(hdw->big_lock);
}
-void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, int enable_flag)
+
+/* Grab EEPROM contents, needed for direct method. */
+#define EEPROM_SIZE 8192
+#define trace_eeprom(...) pvr2_trace(PVR2_TRACE_EEPROM,__VA_ARGS__)
+static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw)
+{
+ struct i2c_msg msg[2];
+ u8 *eeprom;
+ u8 iadd[2];
+ u8 addr;
+ u16 eepromSize;
+ unsigned int offs;
+ int ret;
+ int mode16 = 0;
+ unsigned pcnt,tcnt;
+ eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL);
+ if (!eeprom) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failed to allocate memory"
+ " required to read eeprom");
+ return NULL;
+ }
+
+ trace_eeprom("Value for eeprom addr from controller was 0x%x",
+ hdw->eeprom_addr);
+ addr = hdw->eeprom_addr;
+ /* Seems that if the high bit is set, then the *real* eeprom
+ address is shifted right now bit position (noticed this in
+ newer PVR USB2 hardware) */
+ if (addr & 0x80) addr >>= 1;
+
+ /* FX2 documentation states that a 16bit-addressed eeprom is
+ expected if the I2C address is an odd number (yeah, this is
+ strange but it's what they do) */
+ mode16 = (addr & 1);
+ eepromSize = (mode16 ? EEPROM_SIZE : 256);
+ trace_eeprom("Examining %d byte eeprom at location 0x%x"
+ " using %d bit addressing",eepromSize,addr,
+ mode16 ? 16 : 8);
+
+ msg[0].addr = addr;
+ msg[0].flags = 0;
+ msg[0].len = mode16 ? 2 : 1;
+ msg[0].buf = iadd;
+ msg[1].addr = addr;
+ msg[1].flags = I2C_M_RD;
+
+ /* We have to do the actual eeprom data fetch ourselves, because
+ (1) we're only fetching part of the eeprom, and (2) if we were
+ getting the whole thing our I2C driver can't grab it in one
+ pass - which is what tveeprom is otherwise going to attempt */
+ memset(eeprom,0,EEPROM_SIZE);
+ for (tcnt = 0; tcnt < EEPROM_SIZE; tcnt += pcnt) {
+ pcnt = 16;
+ if (pcnt + tcnt > EEPROM_SIZE) pcnt = EEPROM_SIZE-tcnt;
+ offs = tcnt + (eepromSize - EEPROM_SIZE);
+ if (mode16) {
+ iadd[0] = offs >> 8;
+ iadd[1] = offs;
+ } else {
+ iadd[0] = offs;
+ }
+ msg[1].len = pcnt;
+ msg[1].buf = eeprom+tcnt;
+ if ((ret = i2c_transfer(&hdw->i2c_adap,
+ msg,ARRAY_SIZE(msg))) != 2) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "eeprom fetch set offs err=%d",ret);
+ kfree(eeprom);
+ return NULL;
+ }
+ }
+ return eeprom;
+}
+
+
+void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
+ int prom_flag,
+ int enable_flag)
{
int ret;
u16 address;
kfree(hdw->fw_buffer);
hdw->fw_buffer = NULL;
hdw->fw_size = 0;
- /* Now release the CPU. It will disconnect and
- reconnect later. */
- pvr2_hdw_cpureset_assert(hdw,0);
+ if (hdw->fw_cpu_flag) {
+ /* Now release the CPU. It will disconnect
+ and reconnect later. */
+ pvr2_hdw_cpureset_assert(hdw,0);
+ }
break;
}
- pvr2_trace(PVR2_TRACE_FIRMWARE,
- "Preparing to suck out CPU firmware");
- hdw->fw_size = 0x2000;
- hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
- if (!hdw->fw_buffer) {
- hdw->fw_size = 0;
- break;
- }
+ hdw->fw_cpu_flag = (prom_flag == 0);
+ if (hdw->fw_cpu_flag) {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Preparing to suck out CPU firmware");
+ hdw->fw_size = 0x2000;
+ hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
+ if (!hdw->fw_buffer) {
+ hdw->fw_size = 0;
+ break;
+ }
- /* We have to hold the CPU during firmware upload. */
- pvr2_hdw_cpureset_assert(hdw,1);
+ /* We have to hold the CPU during firmware upload. */
+ pvr2_hdw_cpureset_assert(hdw,1);
- /* download the firmware from address 0000-1fff in 2048
- (=0x800) bytes chunk. */
+ /* download the firmware from address 0000-1fff in 2048
+ (=0x800) bytes chunk. */
- pvr2_trace(PVR2_TRACE_FIRMWARE,"Grabbing CPU firmware");
- pipe = usb_rcvctrlpipe(hdw->usb_dev, 0);
- for(address = 0; address < hdw->fw_size; address += 0x800) {
- ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0xc0,
- address,0,
- hdw->fw_buffer+address,0x800,HZ);
- if (ret < 0) break;
- }
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Grabbing CPU firmware");
+ pipe = usb_rcvctrlpipe(hdw->usb_dev, 0);
+ for(address = 0; address < hdw->fw_size;
+ address += 0x800) {
+ ret = usb_control_msg(hdw->usb_dev,pipe,
+ 0xa0,0xc0,
+ address,0,
+ hdw->fw_buffer+address,
+ 0x800,HZ);
+ if (ret < 0) break;
+ }
- pvr2_trace(PVR2_TRACE_FIRMWARE,"Done grabbing CPU firmware");
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Done grabbing CPU firmware");
+ } else {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Sucking down EEPROM contents");
+ hdw->fw_buffer = pvr2_full_eeprom_fetch(hdw);
+ if (!hdw->fw_buffer) {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "EEPROM content suck failed.");
+ break;
+ }
+ hdw->fw_size = EEPROM_SIZE;
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Done sucking down EEPROM contents");
+ }
} while (0); LOCK_GIVE(hdw->big_lock);
}
projects / linux-2.6-omap-h63xx.git / commitdiff