#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/poll.h>
#include <linux/uaccess.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
+#include "rt2x00dump.h"
#define PRINT_LINE_LEN_MAX 32
* - eeprom offset/value files
* - bbp offset/value files
* - rf offset/value files
+ * - frame dump folder
+ * - frame dump file
*/
struct dentry *driver_folder;
struct dentry *driver_entry;
struct dentry *bbp_val_entry;
struct dentry *rf_off_entry;
struct dentry *rf_val_entry;
+ struct dentry *frame_folder;
+ struct dentry *frame_dump_entry;
+
+ /*
+ * The frame dump file only allows a single reader,
+ * so we need to store the current state here.
+ */
+ unsigned long frame_dump_flags;
+#define FRAME_DUMP_FILE_OPEN 1
+
+ /*
+ * We queue each frame before dumping it to the user,
+ * per read command we will pass a single skb structure
+ * so we should be prepared to queue multiple sk buffers
+ * before sending it to userspace.
+ */
+ struct sk_buff_head frame_dump_skbqueue;
+ wait_queue_head_t frame_dump_waitqueue;
/*
* Driver and chipset files will use a data buffer
unsigned int offset_rf;
};
+void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
+ struct sk_buff *skb)
+{
+ struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
+ struct skb_desc *desc = get_skb_desc(skb);
+ struct sk_buff *skbcopy;
+ struct rt2x00dump_hdr *dump_hdr;
+ struct timeval timestamp;
+ unsigned int ring_index;
+ unsigned int entry_index;
+
+ do_gettimeofday(×tamp);
+ ring_index = ARRAY_INDEX(desc->ring, rt2x00dev->rx);
+ entry_index = ARRAY_INDEX(desc->entry, desc->ring->entry);
+
+ if (!test_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags))
+ return;
+
+ if (skb_queue_len(&intf->frame_dump_skbqueue) > 20) {
+ DEBUG(rt2x00dev, "txrx dump queue length exceeded.\n");
+ return;
+ }
+
+ skbcopy = alloc_skb(sizeof(*dump_hdr) + desc->desc_len + desc->data_len,
+ GFP_ATOMIC);
+ if (!skbcopy) {
+ DEBUG(rt2x00dev, "Failed to copy skb for dump.\n");
+ return;
+ }
+
+ dump_hdr = (struct rt2x00dump_hdr *)skb_put(skbcopy, sizeof(*dump_hdr));
+ dump_hdr->version = cpu_to_le32(DUMP_HEADER_VERSION);
+ dump_hdr->header_length = cpu_to_le32(sizeof(*dump_hdr));
+ dump_hdr->desc_length = cpu_to_le32(desc->desc_len);
+ dump_hdr->data_length = cpu_to_le32(desc->data_len);
+ dump_hdr->chip_rt = cpu_to_le16(rt2x00dev->chip.rt);
+ dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf);
+ dump_hdr->chip_rev = cpu_to_le32(rt2x00dev->chip.rev);
+ dump_hdr->type = cpu_to_le16(desc->frame_type);
+ dump_hdr->ring_index = ring_index;
+ dump_hdr->entry_index = entry_index;
+ dump_hdr->timestamp_sec = cpu_to_le32(timestamp.tv_sec);
+ dump_hdr->timestamp_usec = cpu_to_le32(timestamp.tv_usec);
+
+ memcpy(skb_put(skbcopy, desc->desc_len), desc->desc, desc->desc_len);
+ memcpy(skb_put(skbcopy, desc->data_len), desc->data, desc->data_len);
+
+ skb_queue_tail(&intf->frame_dump_skbqueue, skbcopy);
+ wake_up_interruptible(&intf->frame_dump_waitqueue);
+
+ /*
+ * Verify that the file has not been closed while we were working.
+ */
+ if (!test_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags))
+ skb_queue_purge(&intf->frame_dump_skbqueue);
+}
+
static int rt2x00debug_file_open(struct inode *inode, struct file *file)
{
struct rt2x00debug_intf *intf = inode->i_private;
return 0;
}
+static int rt2x00debug_open_ring_dump(struct inode *inode, struct file *file)
+{
+ struct rt2x00debug_intf *intf = inode->i_private;
+ int retval;
+
+ retval = rt2x00debug_file_open(inode, file);
+ if (retval)
+ return retval;
+
+ if (test_and_set_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags)) {
+ rt2x00debug_file_release(inode, file);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int rt2x00debug_release_ring_dump(struct inode *inode, struct file *file)
+{
+ struct rt2x00debug_intf *intf = inode->i_private;
+
+ skb_queue_purge(&intf->frame_dump_skbqueue);
+
+ clear_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags);
+
+ return rt2x00debug_file_release(inode, file);
+}
+
+static ssize_t rt2x00debug_read_ring_dump(struct file *file,
+ char __user *buf,
+ size_t length,
+ loff_t *offset)
+{
+ struct rt2x00debug_intf *intf = file->private_data;
+ struct sk_buff *skb;
+ size_t status;
+ int retval;
+
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ retval =
+ wait_event_interruptible(intf->frame_dump_waitqueue,
+ (skb =
+ skb_dequeue(&intf->frame_dump_skbqueue)));
+ if (retval)
+ return retval;
+
+ status = min((size_t)skb->len, length);
+ if (copy_to_user(buf, skb->data, status)) {
+ status = -EFAULT;
+ goto exit;
+ }
+
+ *offset += status;
+
+exit:
+ kfree_skb(skb);
+
+ return status;
+}
+
+static unsigned int rt2x00debug_poll_ring_dump(struct file *file,
+ poll_table *wait)
+{
+ struct rt2x00debug_intf *intf = file->private_data;
+
+ poll_wait(file, &intf->frame_dump_waitqueue, wait);
+
+ if (!skb_queue_empty(&intf->frame_dump_skbqueue))
+ return POLLOUT | POLLWRNORM;
+
+ return 0;
+}
+
+static const struct file_operations rt2x00debug_fop_ring_dump = {
+ .owner = THIS_MODULE,
+ .read = rt2x00debug_read_ring_dump,
+ .poll = rt2x00debug_poll_ring_dump,
+ .open = rt2x00debug_open_ring_dump,
+ .release = rt2x00debug_release_ring_dump,
+};
+
#define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \
static ssize_t rt2x00debug_read_##__name(struct file *file, \
char __user *buf, \
#undef RT2X00DEBUGFS_CREATE_REGISTER_ENTRY
+ intf->frame_folder =
+ debugfs_create_dir("frame", intf->driver_folder);
+ if (IS_ERR(intf->frame_folder))
+ goto exit;
+
+ intf->frame_dump_entry =
+ debugfs_create_file("dump", S_IRUGO, intf->frame_folder,
+ intf, &rt2x00debug_fop_ring_dump);
+ if (IS_ERR(intf->frame_dump_entry))
+ goto exit;
+
+ skb_queue_head_init(&intf->frame_dump_skbqueue);
+ init_waitqueue_head(&intf->frame_dump_waitqueue);
+
return;
exit:
void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
{
- const struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
+ struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
if (unlikely(!intf))
return;
+ skb_queue_purge(&intf->frame_dump_skbqueue);
+
+ debugfs_remove(intf->frame_dump_entry);
+ debugfs_remove(intf->frame_folder);
debugfs_remove(intf->rf_val_entry);
debugfs_remove(intf->rf_off_entry);
debugfs_remove(intf->bbp_val_entry);
#include "rt2x00.h"
#include "rt2x00lib.h"
+#include "rt2x00dump.h"
/*
* Ring handler.
}
/*
- * Send the tx_status to mac80211,
- * that method also cleans up the skb structure.
+ * Send the tx_status to mac80211 & debugfs.
+ * mac80211 will clean up the skb structure.
*/
+ get_skb_desc(entry->skb)->frame_type = DUMP_FRAME_TXDONE;
+ rt2x00debug_dump_frame(rt2x00dev, entry->skb);
ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, tx_status);
entry->skb = NULL;
}
rx_status->antenna = rt2x00dev->link.ant.active.rx;
/*
- * Send frame to mac80211
+ * Send frame to mac80211 & debugfs
*/
+ get_skb_desc(skb)->frame_type = DUMP_FRAME_RXDONE;
+ rt2x00debug_dump_frame(rt2x00dev, skb);
ieee80211_rx_irqsafe(rt2x00dev->hw, skb, rx_status);
}
EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
*/
skbdesc->entry->skb = skb;
memcpy(&skbdesc->entry->tx_status.control, control, sizeof(*control));
+
+ /*
+ * The frame has been completely initialized and ready
+ * for sending to the device. The caller will push the
+ * frame to the device, but we are going to push the
+ * frame to debugfs here.
+ */
+ skbdesc->frame_type = DUMP_FRAME_TX;
+ rt2x00debug_dump_frame(rt2x00dev, skb);
}
EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc);
--- /dev/null
+/*
+ Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00dump
+ Abstract: Data structures for the rt2x00debug & userspace.
+ */
+
+#ifndef RT2X00DUMP_H
+#define RT2X00DUMP_H
+
+/**
+ * DOC: Introduction
+ *
+ * This header is intended to be exported to userspace,
+ * to make the structures and enumerations available to userspace
+ * applications. This means that all data types should be exportable.
+ *
+ * When rt2x00 is compiled with debugfs support enabled,
+ * it is possible to capture all data coming in and out of the device
+ * by reading the frame dump file. This file can have only a single reader.
+ * The following frames will be reported:
+ * - All incoming frames (rx)
+ * - All outgoing frames (tx, including beacon and atim)
+ * - All completed frames (txdone including atim)
+ *
+ * The data is send to the file using the following format:
+ *
+ * [rt2x00dump header][hardware descriptor][ieee802.11 frame]
+ *
+ * rt2x00dump header: The description of the dumped frame, as well as
+ * additional information usefull for debugging. See &rt2x00dump_hdr.
+ * hardware descriptor: Descriptor that was used to receive or transmit
+ * the frame.
+ * ieee802.11 frame: The actual frame that was received or transmitted.
+ */
+
+/**
+ * enum rt2x00_dump_type - Frame type
+ *
+ * These values are used for the @type member of &rt2x00dump_hdr.
+ * @DUMP_FRAME_RXDONE: This frame has been received by the hardware.
+ * @DUMP_FRAME_TX: This frame is queued for transmission to the hardware.
+ * @DUMP_FRAME_TXDONE: This frame indicates the device has handled
+ * the tx event which has either succeeded or failed. A frame
+ * with this type should also have been reported with as a
+ * %DUMP_FRAME_TX frame.
+ */
+enum rt2x00_dump_type {
+ DUMP_FRAME_RXDONE = 1,
+ DUMP_FRAME_TX = 2,
+ DUMP_FRAME_TXDONE = 3,
+};
+
+/**
+ * struct rt2x00dump_hdr - Dump frame header
+ *
+ * Each frame dumped to the debugfs file starts with this header
+ * attached. This header contains the description of the actual
+ * frame which was dumped.
+ *
+ * New fields inside the structure must be appended to the end of
+ * the structure. This way userspace tools compiled for earlier
+ * header versions can still correctly handle the frame dump
+ * (although they will not handle all data passed to them in the dump).
+ *
+ * @version: Header version should always be set to %DUMP_HEADER_VERSION.
+ * This field must be checked by userspace to determine if it can
+ * handle this frame.
+ * @header_length: The length of the &rt2x00dump_hdr structure. This is
+ * used for compatibility reasons so userspace can easily determine
+ * the location of the next field in the dump.
+ * @desc_length: The length of the device descriptor.
+ * @data_length: The length of the frame data (including the ieee802.11 header.
+ * @chip_rt: RT chipset
+ * @chip_rf: RF chipset
+ * @chip_rev: Chipset revision
+ * @type: The frame type (&rt2x00_dump_type)
+ * @ring_index: The index number of the data ring.
+ * @entry_index: The index number of the entry inside the data ring.
+ * @timestamp_sec: Timestamp - seconds
+ * @timestamp_usec: Timestamp - microseconds
+ */
+struct rt2x00dump_hdr {
+ __le32 version;
+#define DUMP_HEADER_VERSION 2
+
+ __le32 header_length;
+ __le32 desc_length;
+ __le32 data_length;
+
+ __le16 chip_rt;
+ __le16 chip_rf;
+ __le32 chip_rev;
+
+ __le16 type;
+ __u8 ring_index;
+ __u8 entry_index;
+
+ __le32 timestamp_sec;
+ __le32 timestamp_usec;
+};
+
+#endif /* RT2X00DUMP_H */
projects / linux-2.6-omap-h63xx.git / commitdiff