* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * --------------------------------------------------------------------------
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification, immediately at the beginning of the file.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * Where this Software is combined with software released under the terms of
- * the GNU General Public License ("GPL") and the terms of the GPL would require the
- * combined work to also be released under the terms of the GPL, the terms
- * and conditions of this License will apply in addition to those of the
- * GPL with the exception of any terms or conditions of this License that
- * conflict with, or are expressly prohibited by, the GPL.
- *
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* 9/28/04 Christoph Hellwig <hch@lst.de>
* - merge the two source files
* - remove internal queueing code
+ * 14/06/07 Alan Cox <alan@redhat.com>
+ * - Grand cleanup and Linuxisation
*/
#include <linux/module.h>
#include "a100u2w.h"
-#define JIFFIES_TO_MS(t) ((t) * 1000 / HZ)
-#define MS_TO_JIFFIES(j) ((j * HZ) / 1000)
+static struct orc_scb *__orc_alloc_scb(struct orc_host * host);
+static void inia100_scb_handler(struct orc_host *host, struct orc_scb *scb);
-static ORC_SCB *orc_alloc_scb(ORC_HCS * hcsp);
-static void inia100SCBPost(BYTE * pHcb, BYTE * pScb);
+static struct orc_nvram nvram, *nvramp = &nvram;
-static NVRAM nvram, *nvramp = &nvram;
-static UCHAR dftNvRam[64] =
+static u8 default_nvram[64] =
{
/*----------header -------------*/
0x01, /* 0x00: Sub System Vendor ID 0 */
};
-/***************************************************************************/
-static void waitForPause(unsigned amount)
-{
- ULONG the_time = jiffies + MS_TO_JIFFIES(amount);
- while (time_before_eq(jiffies, the_time))
- cpu_relax();
-}
-
-/***************************************************************************/
-static UCHAR waitChipReady(ORC_HCS * hcsp)
+static u8 wait_chip_ready(struct orc_host * host)
{
int i;
for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
- if (ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & HOSTSTOP) /* Wait HOSTSTOP set */
+ if (inb(host->base + ORC_HCTRL) & HOSTSTOP) /* Wait HOSTSTOP set */
return 1;
- waitForPause(100); /* wait 100ms before try again */
+ mdelay(100);
}
return 0;
}
-/***************************************************************************/
-static UCHAR waitFWReady(ORC_HCS * hcsp)
+static u8 wait_firmware_ready(struct orc_host * host)
{
int i;
for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
- if (ORC_RD(hcsp->HCS_Base, ORC_HSTUS) & RREADY) /* Wait READY set */
+ if (inb(host->base + ORC_HSTUS) & RREADY) /* Wait READY set */
return 1;
- waitForPause(100); /* wait 100ms before try again */
+ mdelay(100); /* wait 100ms before try again */
}
return 0;
}
/***************************************************************************/
-static UCHAR waitSCSIRSTdone(ORC_HCS * hcsp)
+static u8 wait_scsi_reset_done(struct orc_host * host)
{
int i;
for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
- if (!(ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & SCSIRST)) /* Wait SCSIRST done */
+ if (!(inb(host->base + ORC_HCTRL) & SCSIRST)) /* Wait SCSIRST done */
return 1;
- waitForPause(100); /* wait 100ms before try again */
+ mdelay(100); /* wait 100ms before try again */
}
return 0;
}
/***************************************************************************/
-static UCHAR waitHDOoff(ORC_HCS * hcsp)
+static u8 wait_HDO_off(struct orc_host * host)
{
int i;
for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
- if (!(ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & HDO)) /* Wait HDO off */
+ if (!(inb(host->base + ORC_HCTRL) & HDO)) /* Wait HDO off */
return 1;
- waitForPause(100); /* wait 100ms before try again */
+ mdelay(100); /* wait 100ms before try again */
}
return 0;
}
/***************************************************************************/
-static UCHAR waitHDIset(ORC_HCS * hcsp, UCHAR * pData)
+static u8 wait_hdi_set(struct orc_host * host, u8 * data)
{
int i;
for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
- if ((*pData = ORC_RD(hcsp->HCS_Base, ORC_HSTUS)) & HDI)
+ if ((*data = inb(host->base + ORC_HSTUS)) & HDI)
return 1; /* Wait HDI set */
- waitForPause(100); /* wait 100ms before try again */
+ mdelay(100); /* wait 100ms before try again */
}
return 0;
}
/***************************************************************************/
-static unsigned short get_FW_version(ORC_HCS * hcsp)
+static unsigned short orc_read_fwrev(struct orc_host * host)
{
- UCHAR bData;
- union {
- unsigned short sVersion;
- unsigned char cVersion[2];
- } Version;
-
- ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_VERSION);
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
- if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ u16 version;
+ u8 data;
+
+ outb(ORC_CMD_VERSION, host->base + ORC_HDATA);
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
return 0;
- if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */
+ if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */
return 0;
- Version.cVersion[0] = ORC_RD(hcsp->HCS_Base, ORC_HDATA);
- ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */
+ version = inb(host->base + ORC_HDATA);
+ outb(data, host->base + ORC_HSTUS); /* Clear HDI */
- if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */
+ if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */
return 0;
- Version.cVersion[1] = ORC_RD(hcsp->HCS_Base, ORC_HDATA);
- ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */
+ version |= inb(host->base + ORC_HDATA) << 8;
+ outb(data, host->base + ORC_HSTUS); /* Clear HDI */
- return (Version.sVersion);
+ return version;
}
/***************************************************************************/
-static UCHAR set_NVRAM(ORC_HCS * hcsp, unsigned char address, unsigned char value)
+static u8 orc_nv_write(struct orc_host * host, unsigned char address, unsigned char value)
{
- ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_SET_NVM); /* Write command */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
- if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ outb(ORC_CMD_SET_NVM, host->base + ORC_HDATA); /* Write command */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
return 0;
- ORC_WR(hcsp->HCS_Base + ORC_HDATA, address); /* Write address */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
- if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ outb(address, host->base + ORC_HDATA); /* Write address */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
return 0;
- ORC_WR(hcsp->HCS_Base + ORC_HDATA, value); /* Write value */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
- if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ outb(value, host->base + ORC_HDATA); /* Write value */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
return 0;
return 1;
}
/***************************************************************************/
-static UCHAR get_NVRAM(ORC_HCS * hcsp, unsigned char address, unsigned char *pDataIn)
+static u8 orc_nv_read(struct orc_host * host, u8 address, u8 *ptr)
{
- unsigned char bData;
+ unsigned char data;
- ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_GET_NVM); /* Write command */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
- if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ outb(ORC_CMD_GET_NVM, host->base + ORC_HDATA); /* Write command */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
return 0;
- ORC_WR(hcsp->HCS_Base + ORC_HDATA, address); /* Write address */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
- if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ outb(address, host->base + ORC_HDATA); /* Write address */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
return 0;
- if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */
+ if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */
return 0;
- *pDataIn = ORC_RD(hcsp->HCS_Base, ORC_HDATA);
- ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */
+ *ptr = inb(host->base + ORC_HDATA);
+ outb(data, host->base + ORC_HSTUS); /* Clear HDI */
return 1;
+
}
-/***************************************************************************/
-static void orc_exec_scb(ORC_HCS * hcsp, ORC_SCB * scbp)
+/**
+ * orc_exec_sb - Queue an SCB with the HA
+ * @host: host adapter the SCB belongs to
+ * @scb: SCB to queue for execution
+ */
+
+static void orc_exec_scb(struct orc_host * host, struct orc_scb * scb)
{
- scbp->SCB_Status = ORCSCB_POST;
- ORC_WR(hcsp->HCS_Base + ORC_PQUEUE, scbp->SCB_ScbIdx);
- return;
+ scb->status = ORCSCB_POST;
+ outb(scb->scbidx, host->base + ORC_PQUEUE);
}
-/***********************************************************************
- Read SCSI H/A configuration parameters from serial EEPROM
-************************************************************************/
-static int se2_rd_all(ORC_HCS * hcsp)
+/**
+ * se2_rd_all - read SCSI parameters from EEPROM
+ * @host: Host whose EEPROM is being loaded
+ *
+ * Read SCSI H/A configuration parameters from serial EEPROM
+ */
+
+static int se2_rd_all(struct orc_host * host)
{
int i;
- UCHAR *np, chksum = 0;
+ u8 *np, chksum = 0;
- np = (UCHAR *) nvramp;
+ np = (u8 *) nvramp;
for (i = 0; i < 64; i++, np++) { /* <01> */
- if (get_NVRAM(hcsp, (unsigned char) i, np) == 0)
+ if (orc_nv_read(host, (u8) i, np) == 0)
return -1;
-// *np++ = get_NVRAM(hcsp, (unsigned char ) i);
}
-/*------ Is ckecksum ok ? ------*/
- np = (UCHAR *) nvramp;
+ /*------ Is ckecksum ok ? ------*/
+ np = (u8 *) nvramp;
for (i = 0; i < 63; i++)
chksum += *np++;
- if (nvramp->CheckSum != (UCHAR) chksum)
+ if (nvramp->CheckSum != (u8) chksum)
return -1;
return 1;
}
-/************************************************************************
- Update SCSI H/A configuration parameters from serial EEPROM
-*************************************************************************/
-static void se2_update_all(ORC_HCS * hcsp)
+/**
+ * se2_update_all - update the EEPROM
+ * @host: Host whose EEPROM is being updated
+ *
+ * Update changed bytes in the EEPROM image.
+ */
+
+static void se2_update_all(struct orc_host * host)
{ /* setup default pattern */
int i;
- UCHAR *np, *np1, chksum = 0;
+ u8 *np, *np1, chksum = 0;
/* Calculate checksum first */
- np = (UCHAR *) dftNvRam;
+ np = (u8 *) default_nvram;
for (i = 0; i < 63; i++)
chksum += *np++;
*np = chksum;
- np = (UCHAR *) dftNvRam;
- np1 = (UCHAR *) nvramp;
+ np = (u8 *) default_nvram;
+ np1 = (u8 *) nvramp;
for (i = 0; i < 64; i++, np++, np1++) {
- if (*np != *np1) {
- set_NVRAM(hcsp, (unsigned char) i, *np);
- }
+ if (*np != *np1)
+ orc_nv_write(host, (u8) i, *np);
}
- return;
}
-/*************************************************************************
- Function name : read_eeprom
-**************************************************************************/
-static void read_eeprom(ORC_HCS * hcsp)
+/**
+ * read_eeprom - load EEPROM
+ * @host: Host EEPROM to read
+ *
+ * Read the EEPROM for a given host. If it is invalid or fails
+ * the restore the defaults and use them.
+ */
+
+static void read_eeprom(struct orc_host * host)
{
- if (se2_rd_all(hcsp) != 1) {
- se2_update_all(hcsp); /* setup default pattern */
- se2_rd_all(hcsp); /* load again */
+ if (se2_rd_all(host) != 1) {
+ se2_update_all(host); /* setup default pattern */
+ se2_rd_all(host); /* load again */
}
}
-/***************************************************************************/
-static UCHAR load_FW(ORC_HCS * hcsp)
+/**
+ * orc_load_firmware - initialise firmware
+ * @host: Host to set up
+ *
+ * Load the firmware from the EEPROM into controller SRAM. This
+ * is basically a 4K block copy and then a 4K block read to check
+ * correctness. The rest is convulted by the indirect interfaces
+ * in the hardware
+ */
+
+static u8 orc_load_firmware(struct orc_host * host)
{
- U32 dData;
- USHORT wBIOSAddress;
- USHORT i;
- UCHAR *pData, bData;
-
-
- bData = ORC_RD(hcsp->HCS_Base, ORC_GCFG);
- ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData | EEPRG); /* Enable EEPROM programming */
- ORC_WR(hcsp->HCS_Base + ORC_EBIOSADR2, 0x00);
- ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x00);
- if (ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA) != 0x55) {
- ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */
+ u32 data32;
+ u16 bios_addr;
+ u16 i;
+ u8 *data32_ptr, data;
+
+
+ /* Set up the EEPROM for access */
+
+ data = inb(host->base + ORC_GCFG);
+ outb(data | EEPRG, host->base + ORC_GCFG); /* Enable EEPROM programming */
+ outb(0x00, host->base + ORC_EBIOSADR2);
+ outw(0x0000, host->base + ORC_EBIOSADR0);
+ if (inb(host->base + ORC_EBIOSDATA) != 0x55) {
+ outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */
return 0;
}
- ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x01);
- if (ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA) != 0xAA) {
- ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */
+ outw(0x0001, host->base + ORC_EBIOSADR0);
+ if (inb(host->base + ORC_EBIOSDATA) != 0xAA) {
+ outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */
return 0;
}
- ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST | DOWNLOAD); /* Enable SRAM programming */
- pData = (UCHAR *) & dData;
- dData = 0; /* Initial FW address to 0 */
- ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x10);
- *pData = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
- ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x11);
- *(pData + 1) = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
- ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x12);
- *(pData + 2) = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
- ORC_WR(hcsp->HCS_Base + ORC_EBIOSADR2, *(pData + 2));
- ORC_WRLONG(hcsp->HCS_Base + ORC_FWBASEADR, dData); /* Write FW address */
-
- wBIOSAddress = (USHORT) dData; /* FW code locate at BIOS address + ? */
- for (i = 0, pData = (UCHAR *) & dData; /* Download the code */
+
+ outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Enable SRAM programming */
+ data32_ptr = (u8 *) & data32;
+ data32 = 0; /* Initial FW address to 0 */
+ outw(0x0010, host->base + ORC_EBIOSADR0);
+ *data32_ptr = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
+ outw(0x0011, host->base + ORC_EBIOSADR0);
+ *(data32_ptr + 1) = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
+ outw(0x0012, host->base + ORC_EBIOSADR0);
+ *(data32_ptr + 2) = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
+ outw(*(data32_ptr + 2), host->base + ORC_EBIOSADR2);
+ outl(data32, host->base + ORC_FWBASEADR); /* Write FW address */
+
+ /* Copy the code from the BIOS to the SRAM */
+
+ bios_addr = (u16) data32; /* FW code locate at BIOS address + ? */
+ for (i = 0, data32_ptr = (u8 *) & data32; /* Download the code */
i < 0x1000; /* Firmware code size = 4K */
- i++, wBIOSAddress++) {
- ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, wBIOSAddress);
- *pData++ = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
+ i++, bios_addr++) {
+ outw(bios_addr, host->base + ORC_EBIOSADR0);
+ *data32_ptr++ = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
if ((i % 4) == 3) {
- ORC_WRLONG(hcsp->HCS_Base + ORC_RISCRAM, dData); /* Write every 4 bytes */
- pData = (UCHAR *) & dData;
+ outl(data32, host->base + ORC_RISCRAM); /* Write every 4 bytes */
+ data32_ptr = (u8 *) & data32;
}
}
- ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST | DOWNLOAD); /* Reset program count 0 */
- wBIOSAddress -= 0x1000; /* Reset the BIOS adddress */
- for (i = 0, pData = (UCHAR *) & dData; /* Check the code */
+ /* Go back and check they match */
+
+ outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */
+ bios_addr -= 0x1000; /* Reset the BIOS adddress */
+ for (i = 0, data32_ptr = (u8 *) & data32; /* Check the code */
i < 0x1000; /* Firmware code size = 4K */
- i++, wBIOSAddress++) {
- ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, wBIOSAddress);
- *pData++ = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
+ i++, bios_addr++) {
+ outw(bios_addr, host->base + ORC_EBIOSADR0);
+ *data32_ptr++ = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
if ((i % 4) == 3) {
- if (ORC_RDLONG(hcsp->HCS_Base, ORC_RISCRAM) != dData) {
- ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST); /* Reset program to 0 */
- ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /*Disable EEPROM programming */
+ if (inl(host->base + ORC_RISCRAM) != data32) {
+ outb(PRGMRST, host->base + ORC_RISCCTL); /* Reset program to 0 */
+ outb(data, host->base + ORC_GCFG); /*Disable EEPROM programming */
return 0;
}
- pData = (UCHAR *) & dData;
+ data32_ptr = (u8 *) & data32;
}
}
- ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST); /* Reset program to 0 */
- ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */
+
+ /* Success */
+ outb(PRGMRST, host->base + ORC_RISCCTL); /* Reset program to 0 */
+ outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */
return 1;
}
/***************************************************************************/
-static void setup_SCBs(ORC_HCS * hcsp)
+static void setup_SCBs(struct orc_host * host)
{
- ORC_SCB *pVirScb;
+ struct orc_scb *scb;
int i;
- ESCB *pVirEscb;
- dma_addr_t pPhysEscb;
+ struct orc_extended_scb *escb;
+ dma_addr_t escb_phys;
- /* Setup SCB HCS_Base and SCB Size registers */
- ORC_WR(hcsp->HCS_Base + ORC_SCBSIZE, ORC_MAXQUEUE); /* Total number of SCBs */
- /* SCB HCS_Base address 0 */
- ORC_WRLONG(hcsp->HCS_Base + ORC_SCBBASE0, hcsp->HCS_physScbArray);
- /* SCB HCS_Base address 1 */
- ORC_WRLONG(hcsp->HCS_Base + ORC_SCBBASE1, hcsp->HCS_physScbArray);
+ /* Setup SCB base and SCB Size registers */
+ outb(ORC_MAXQUEUE, host->base + ORC_SCBSIZE); /* Total number of SCBs */
+ /* SCB base address 0 */
+ outl(host->scb_phys, host->base + ORC_SCBBASE0);
+ /* SCB base address 1 */
+ outl(host->scb_phys, host->base + ORC_SCBBASE1);
/* setup scatter list address with one buffer */
- pVirScb = hcsp->HCS_virScbArray;
- pVirEscb = hcsp->HCS_virEscbArray;
+ scb = host->scb_virt;
+ escb = host->escb_virt;
for (i = 0; i < ORC_MAXQUEUE; i++) {
- pPhysEscb = (hcsp->HCS_physEscbArray + (sizeof(ESCB) * i));
- pVirScb->SCB_SGPAddr = (U32) pPhysEscb;
- pVirScb->SCB_SensePAddr = (U32) pPhysEscb;
- pVirScb->SCB_EScb = pVirEscb;
- pVirScb->SCB_ScbIdx = i;
- pVirScb++;
- pVirEscb++;
+ escb_phys = (host->escb_phys + (sizeof(struct orc_extended_scb) * i));
+ scb->sg_addr = (u32) escb_phys;
+ scb->sense_addr = (u32) escb_phys;
+ scb->escb = escb;
+ scb->scbidx = i;
+ scb++;
+ escb++;
}
-
- return;
}
-/***************************************************************************/
-static void initAFlag(ORC_HCS * hcsp)
+/**
+ * init_alloc_map - initialise allocation map
+ * @host: host map to configure
+ *
+ * Initialise the allocation maps for this device. If the device
+ * is not quiescent the caller must hold the allocation lock
+ */
+
+static void init_alloc_map(struct orc_host * host)
{
- UCHAR i, j;
+ u8 i, j;
for (i = 0; i < MAX_CHANNELS; i++) {
for (j = 0; j < 8; j++) {
- hcsp->BitAllocFlag[i][j] = 0xffffffff;
+ host->allocation_map[i][j] = 0xffffffff;
}
}
}
-/***************************************************************************/
-static int init_orchid(ORC_HCS * hcsp)
+/**
+ * init_orchid - initialise the host adapter
+ * @host:host adapter to initialise
+ *
+ * Initialise the controller and if neccessary load the firmware.
+ *
+ * Returns -1 if the initialisation fails.
+ */
+
+static int init_orchid(struct orc_host * host)
{
- UBYTE *readBytep;
- USHORT revision;
- UCHAR i;
-
- initAFlag(hcsp);
- ORC_WR(hcsp->HCS_Base + ORC_GIMSK, 0xFF); /* Disable all interrupt */
- if (ORC_RD(hcsp->HCS_Base, ORC_HSTUS) & RREADY) { /* Orchid is ready */
- revision = get_FW_version(hcsp);
+ u8 *ptr;
+ u16 revision;
+ u8 i;
+
+ init_alloc_map(host);
+ outb(0xFF, host->base + ORC_GIMSK); /* Disable all interrupts */
+
+ if (inb(host->base + ORC_HSTUS) & RREADY) { /* Orchid is ready */
+ revision = orc_read_fwrev(host);
if (revision == 0xFFFF) {
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, DEVRST); /* Reset Host Adapter */
- if (waitChipReady(hcsp) == 0)
- return (-1);
- load_FW(hcsp); /* Download FW */
- setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, 0); /* clear HOSTSTOP */
- if (waitFWReady(hcsp) == 0)
- return (-1);
+ outb(DEVRST, host->base + ORC_HCTRL); /* Reset Host Adapter */
+ if (wait_chip_ready(host) == 0)
+ return -1;
+ orc_load_firmware(host); /* Download FW */
+ setup_SCBs(host); /* Setup SCB base and SCB Size registers */
+ outb(0x00, host->base + ORC_HCTRL); /* clear HOSTSTOP */
+ if (wait_firmware_ready(host) == 0)
+ return -1;
/* Wait for firmware ready */
} else {
- setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */
+ setup_SCBs(host); /* Setup SCB base and SCB Size registers */
}
} else { /* Orchid is not Ready */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, DEVRST); /* Reset Host Adapter */
- if (waitChipReady(hcsp) == 0)
- return (-1);
- load_FW(hcsp); /* Download FW */
- setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); /* Do Hardware Reset & */
+ outb(DEVRST, host->base + ORC_HCTRL); /* Reset Host Adapter */
+ if (wait_chip_ready(host) == 0)
+ return -1;
+ orc_load_firmware(host); /* Download FW */
+ setup_SCBs(host); /* Setup SCB base and SCB Size registers */
+ outb(HDO, host->base + ORC_HCTRL); /* Do Hardware Reset & */
/* clear HOSTSTOP */
- if (waitFWReady(hcsp) == 0) /* Wait for firmware ready */
- return (-1);
+ if (wait_firmware_ready(host) == 0) /* Wait for firmware ready */
+ return -1;
}
-/*------------- get serial EEProm settting -------*/
+ /* Load an EEProm copy into RAM */
+ /* Assumes single threaded at this point */
+ read_eeprom(host);
- read_eeprom(hcsp);
-
- if (nvramp->Revision != 1)
- return (-1);
-
- hcsp->HCS_SCSI_ID = nvramp->SCSI0Id;
- hcsp->HCS_BIOS = nvramp->BIOSConfig1;
- hcsp->HCS_MaxTar = MAX_TARGETS;
- readBytep = (UCHAR *) & (nvramp->Target00Config);
- for (i = 0; i < 16; readBytep++, i++) {
- hcsp->TargetFlag[i] = *readBytep;
- hcsp->MaximumTags[i] = ORC_MAXTAGS;
- } /* for */
+ if (nvramp->revision != 1)
+ return -1;
- if (nvramp->SCSI0Config & NCC_BUSRESET) { /* Reset SCSI bus */
- hcsp->HCS_Flags |= HCF_SCSI_RESET;
+ host->scsi_id = nvramp->scsi_id;
+ host->BIOScfg = nvramp->BIOSConfig1;
+ host->max_targets = MAX_TARGETS;
+ ptr = (u8 *) & (nvramp->Target00Config);
+ for (i = 0; i < 16; ptr++, i++) {
+ host->target_flag[i] = *ptr;
+ host->max_tags[i] = ORC_MAXTAGS;
}
- ORC_WR(hcsp->HCS_Base + ORC_GIMSK, 0xFB); /* enable RP FIFO interrupt */
- return (0);
+
+ if (nvramp->SCSI0Config & NCC_BUSRESET)
+ host->flags |= HCF_SCSI_RESET;
+ outb(0xFB, host->base + ORC_GIMSK); /* enable RP FIFO interrupt */
+ return 0;
}
-/*****************************************************************************
- Function name : orc_reset_scsi_bus
- Description : Reset registers, reset a hanging bus and
- kill active and disconnected commands for target w/o soft reset
- Input : pHCB - Pointer to host adapter structure
- Output : None.
- Return : pSRB - Pointer to SCSI request block.
-*****************************************************************************/
-static int orc_reset_scsi_bus(ORC_HCS * pHCB)
+/**
+ * orc_reset_scsi_bus - perform bus reset
+ * @host: host being reset
+ *
+ * Perform a full bus reset on the adapter.
+ */
+
+static int orc_reset_scsi_bus(struct orc_host * host)
{ /* I need Host Control Block Information */
- ULONG flags;
+ unsigned long flags;
- spin_lock_irqsave(&(pHCB->BitAllocFlagLock), flags);
+ spin_lock_irqsave(&host->allocation_lock, flags);
- initAFlag(pHCB);
+ init_alloc_map(host);
/* reset scsi bus */
- ORC_WR(pHCB->HCS_Base + ORC_HCTRL, SCSIRST);
- if (waitSCSIRSTdone(pHCB) == 0) {
- spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+ outb(SCSIRST, host->base + ORC_HCTRL);
+ /* FIXME: We can spend up to a second with the lock held and
+ interrupts off here */
+ if (wait_scsi_reset_done(host) == 0) {
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
return FAILED;
} else {
- spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
return SUCCESS;
}
}
-/*****************************************************************************
- Function name : orc_device_reset
- Description : Reset registers, reset a hanging bus and
- kill active and disconnected commands for target w/o soft reset
- Input : pHCB - Pointer to host adapter structure
- Output : None.
- Return : pSRB - Pointer to SCSI request block.
-*****************************************************************************/
-static int orc_device_reset(ORC_HCS * pHCB, struct scsi_cmnd *SCpnt, unsigned int target)
+/**
+ * orc_device_reset - device reset handler
+ * @host: host to reset
+ * @cmd: command causing the reset
+ * @target; target device
+ *
+ * Reset registers, reset a hanging bus and kill active and disconnected
+ * commands for target w/o soft reset
+ */
+
+static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsigned int target)
{ /* I need Host Control Block Information */
- ORC_SCB *pScb;
- ESCB *pVirEscb;
- ORC_SCB *pVirScb;
- UCHAR i;
- ULONG flags;
+ struct orc_scb *scb;
+ struct orc_extended_scb *escb;
+ struct orc_scb *host_scb;
+ u8 i;
+ unsigned long flags;
- spin_lock_irqsave(&(pHCB->BitAllocFlagLock), flags);
- pScb = (ORC_SCB *) NULL;
- pVirEscb = (ESCB *) NULL;
+ spin_lock_irqsave(&(host->allocation_lock), flags);
+ scb = (struct orc_scb *) NULL;
+ escb = (struct orc_extended_scb *) NULL;
/* setup scatter list address with one buffer */
- pVirScb = pHCB->HCS_virScbArray;
+ host_scb = host->scb_virt;
- initAFlag(pHCB);
- /* device reset */
+ /* FIXME: is this safe if we then fail to issue the reset or race
+ a completion ? */
+ init_alloc_map(host);
+
+ /* Find the scb corresponding to the command */
for (i = 0; i < ORC_MAXQUEUE; i++) {
- pVirEscb = pVirScb->SCB_EScb;
- if ((pVirScb->SCB_Status) && (pVirEscb->SCB_Srb == SCpnt))
+ escb = host_scb->escb;
+ if (host_scb->status && escb->srb == cmd)
break;
- pVirScb++;
+ host_scb++;
}
if (i == ORC_MAXQUEUE) {
- printk("Unable to Reset - No SCB Found\n");
- spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+ printk(KERN_ERR "Unable to Reset - No SCB Found\n");
+ spin_unlock_irqrestore(&(host->allocation_lock), flags);
return FAILED;
}
- if ((pScb = orc_alloc_scb(pHCB)) == NULL) {
- spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+
+ /* Allocate a new SCB for the reset command to the firmware */
+ if ((scb = __orc_alloc_scb(host)) == NULL) {
+ /* Can't happen.. */
+ spin_unlock_irqrestore(&(host->allocation_lock), flags);
return FAILED;
}
- pScb->SCB_Opcode = ORC_BUSDEVRST;
- pScb->SCB_Target = target;
- pScb->SCB_HaStat = 0;
- pScb->SCB_TaStat = 0;
- pScb->SCB_Status = 0x0;
- pScb->SCB_Link = 0xFF;
- pScb->SCB_Reserved0 = 0;
- pScb->SCB_Reserved1 = 0;
- pScb->SCB_XferLen = 0;
- pScb->SCB_SGLen = 0;
-
- pVirEscb->SCB_Srb = NULL;
- pVirEscb->SCB_Srb = SCpnt;
- orc_exec_scb(pHCB, pScb); /* Start execute SCB */
- spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+
+ /* Reset device is handled by the firmare, we fill in an SCB and
+ fire it at the controller, it does the rest */
+ scb->opcode = ORC_BUSDEVRST;
+ scb->target = target;
+ scb->hastat = 0;
+ scb->tastat = 0;
+ scb->status = 0x0;
+ scb->link = 0xFF;
+ scb->reserved0 = 0;
+ scb->reserved1 = 0;
+ scb->xferlen = 0;
+ scb->sg_len = 0;
+
+ escb->srb = NULL;
+ escb->srb = cmd;
+ orc_exec_scb(host, scb); /* Start execute SCB */
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
return SUCCESS;
}
+/**
+ * __orc_alloc_scb - allocate an SCB
+ * @host: host to allocate from
+ *
+ * Allocate an SCB and return a pointer to the SCB object. NULL
+ * is returned if no SCB is free. The caller must already hold
+ * the allocator lock at this point.
+ */
-/***************************************************************************/
-static ORC_SCB *__orc_alloc_scb(ORC_HCS * hcsp)
+
+static struct orc_scb *__orc_alloc_scb(struct orc_host * host)
{
- ORC_SCB *pTmpScb;
- UCHAR Ch;
- ULONG idx;
- UCHAR index;
- UCHAR i;
+ u8 channel;
+ unsigned long idx;
+ u8 index;
+ u8 i;
- Ch = hcsp->HCS_Index;
+ channel = host->index;
for (i = 0; i < 8; i++) {
for (index = 0; index < 32; index++) {
- if ((hcsp->BitAllocFlag[Ch][i] >> index) & 0x01) {
- hcsp->BitAllocFlag[Ch][i] &= ~(1 << index);
+ if ((host->allocation_map[channel][i] >> index) & 0x01) {
+ host->allocation_map[channel][i] &= ~(1 << index);
break;
}
}
idx = index + 32 * i;
- pTmpScb = (ORC_SCB *) ((ULONG) hcsp->HCS_virScbArray + (idx * sizeof(ORC_SCB)));
- return (pTmpScb);
+ /* Translate the index to a structure instance */
+ return (struct orc_scb *) ((unsigned long) host->scb_virt + (idx * sizeof(struct orc_scb)));
}
- return (NULL);
+ return NULL;
}
-static ORC_SCB *orc_alloc_scb(ORC_HCS * hcsp)
+/**
+ * orc_alloc_scb - allocate an SCB
+ * @host: host to allocate from
+ *
+ * Allocate an SCB and return a pointer to the SCB object. NULL
+ * is returned if no SCB is free.
+ */
+
+static struct orc_scb *orc_alloc_scb(struct orc_host * host)
{
- ORC_SCB *pTmpScb;
- ULONG flags;
+ struct orc_scb *scb;
+ unsigned long flags;
- spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags);
- pTmpScb = __orc_alloc_scb(hcsp);
- spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
- return (pTmpScb);
+ spin_lock_irqsave(&host->allocation_lock, flags);
+ scb = __orc_alloc_scb(host);
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
+ return scb;
}
+/**
+ * orc_release_scb - release an SCB
+ * @host: host owning the SCB
+ * @scb: SCB that is now free
+ *
+ * Called to return a completed SCB to the allocation pool. Before
+ * calling the SCB must be out of use on both the host and the HA.
+ */
-/***************************************************************************/
-static void orc_release_scb(ORC_HCS * hcsp, ORC_SCB * scbp)
+static void orc_release_scb(struct orc_host *host, struct orc_scb *scb)
{
- ULONG flags;
- UCHAR Index;
- UCHAR i;
- UCHAR Ch;
-
- spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags);
- Ch = hcsp->HCS_Index;
- Index = scbp->SCB_ScbIdx;
- i = Index / 32;
- Index %= 32;
- hcsp->BitAllocFlag[Ch][i] |= (1 << Index);
- spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+ unsigned long flags;
+ u8 index, i, channel;
+
+ spin_lock_irqsave(&(host->allocation_lock), flags);
+ channel = host->index; /* Channel */
+ index = scb->scbidx;
+ i = index / 32;
+ index %= 32;
+ host->allocation_map[channel][i] |= (1 << index);
+ spin_unlock_irqrestore(&(host->allocation_lock), flags);
}
-/*****************************************************************************
- Function name : abort_SCB
- Description : Abort a queued command.
- (commands that are on the bus can't be aborted easily)
- Input : pHCB - Pointer to host adapter structure
- Output : None.
- Return : pSRB - Pointer to SCSI request block.
-*****************************************************************************/
-static int abort_SCB(ORC_HCS * hcsp, ORC_SCB * pScb)
+/**
+ * orchid_abort_scb - abort a command
+ *
+ * Abort a queued command that has been passed to the firmware layer
+ * if possible. This is all handled by the firmware. We aks the firmware
+ * and it either aborts the command or fails
+ */
+
+static int orchid_abort_scb(struct orc_host * host, struct orc_scb * scb)
{
- unsigned char bData, bStatus;
+ unsigned char data, status;
- ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_ABORT_SCB); /* Write command */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
- if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ outb(ORC_CMD_ABORT_SCB, host->base + ORC_HDATA); /* Write command */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
return 0;
- ORC_WR(hcsp->HCS_Base + ORC_HDATA, pScb->SCB_ScbIdx); /* Write address */
- ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
- if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ outb(scb->scbidx, host->base + ORC_HDATA); /* Write address */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
return 0;
- if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */
+ if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */
return 0;
- bStatus = ORC_RD(hcsp->HCS_Base, ORC_HDATA);
- ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */
+ status = inb(host->base + ORC_HDATA);
+ outb(data, host->base + ORC_HSTUS); /* Clear HDI */
- if (bStatus == 1) /* 0 - Successfully */
+ if (status == 1) /* 0 - Successfully */
return 0; /* 1 - Fail */
return 1;
}
-/*****************************************************************************
- Function name : inia100_abort
- Description : Abort a queued command.
- (commands that are on the bus can't be aborted easily)
- Input : pHCB - Pointer to host adapter structure
- Output : None.
- Return : pSRB - Pointer to SCSI request block.
-*****************************************************************************/
-static int orc_abort_srb(ORC_HCS * hcsp, struct scsi_cmnd *SCpnt)
+static int inia100_abort_cmd(struct orc_host * host, struct scsi_cmnd *cmd)
{
- ESCB *pVirEscb;
- ORC_SCB *pVirScb;
- UCHAR i;
- ULONG flags;
+ struct orc_extended_scb *escb;
+ struct orc_scb *scb;
+ u8 i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&(host->allocation_lock), flags);
- spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags);
+ scb = host->scb_virt;
- pVirScb = hcsp->HCS_virScbArray;
+ /* Walk the queue until we find the SCB that belongs to the command
+ block. This isn't a performance critical path so a walk in the park
+ here does no harm */
- for (i = 0; i < ORC_MAXQUEUE; i++, pVirScb++) {
- pVirEscb = pVirScb->SCB_EScb;
- if ((pVirScb->SCB_Status) && (pVirEscb->SCB_Srb == SCpnt)) {
- if (pVirScb->SCB_TagMsg == 0) {
- spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
- return FAILED;
+ for (i = 0; i < ORC_MAXQUEUE; i++, scb++) {
+ escb = scb->escb;
+ if (scb->status && escb->srb == cmd) {
+ if (scb->tag_msg == 0) {
+ goto out;
} else {
- if (abort_SCB(hcsp, pVirScb)) {
- pVirEscb->SCB_Srb = NULL;
- spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+ /* Issue an ABORT to the firmware */
+ if (orchid_abort_scb(host, scb)) {
+ escb->srb = NULL;
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
return SUCCESS;
- } else {
- spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
- return FAILED;
- }
+ } else
+ goto out;
}
}
}
- spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+out:
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
return FAILED;
}
-/***********************************************************************
- Routine Description:
- This is the interrupt service routine for the Orchid SCSI adapter.
- It reads the interrupt register to determine if the adapter is indeed
- the source of the interrupt and clears the interrupt at the device.
- Arguments:
- HwDeviceExtension - HBA miniport driver's adapter data storage
- Return Value:
-***********************************************************************/
-static void orc_interrupt(
- ORC_HCS * hcsp
-)
+/**
+ * orc_interrupt - IRQ processing
+ * @host: Host causing the interrupt
+ *
+ * This function is called from the IRQ handler and protected
+ * by the host lock. While the controller reports that there are
+ * scb's for processing we pull them off the controller, turn the
+ * index into a host address pointer to the scb and call the scb
+ * handler.
+ *
+ * Returns IRQ_HANDLED if any SCBs were processed, IRQ_NONE otherwise
+ */
+
+static irqreturn_t orc_interrupt(struct orc_host * host)
{
- BYTE bScbIdx;
- ORC_SCB *pScb;
+ u8 scb_index;
+ struct orc_scb *scb;
- if (ORC_RD(hcsp->HCS_Base, ORC_RQUEUECNT) == 0) {
- return; // 0;
+ /* Check if we have an SCB queued for servicing */
+ if (inb(host->base + ORC_RQUEUECNT) == 0)
+ return IRQ_NONE;
- }
do {
- bScbIdx = ORC_RD(hcsp->HCS_Base, ORC_RQUEUE);
-
- pScb = (ORC_SCB *) ((ULONG) hcsp->HCS_virScbArray + (ULONG) (sizeof(ORC_SCB) * bScbIdx));
- pScb->SCB_Status = 0x0;
-
- inia100SCBPost((BYTE *) hcsp, (BYTE *) pScb);
- } while (ORC_RD(hcsp->HCS_Base, ORC_RQUEUECNT));
- return; //1;
-
+ /* Get the SCB index of the SCB to service */
+ scb_index = inb(host->base + ORC_RQUEUE);
+
+ /* Translate it back to a host pointer */
+ scb = (struct orc_scb *) ((unsigned long) host->scb_virt + (unsigned long) (sizeof(struct orc_scb) * scb_index));
+ scb->status = 0x0;
+ /* Process the SCB */
+ inia100_scb_handler(host, scb);
+ } while (inb(host->base + ORC_RQUEUECNT));
+ return IRQ_HANDLED;
} /* End of I1060Interrupt() */
-/*****************************************************************************
- Function name : inia100BuildSCB
- Description :
- Input : pHCB - Pointer to host adapter structure
- Output : None.
- Return : pSRB - Pointer to SCSI request block.
-*****************************************************************************/
-static void inia100BuildSCB(ORC_HCS * pHCB, ORC_SCB * pSCB, struct scsi_cmnd * SCpnt)
+/**
+ * inia100_build_scb - build SCB
+ * @host: host owing the control block
+ * @scb: control block to use
+ * @cmd: Mid layer command
+ *
+ * Build a host adapter control block from the SCSI mid layer command
+ */
+
+static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struct scsi_cmnd * cmd)
{ /* Create corresponding SCB */
struct scatterlist *sg;
- ORC_SG *pSG; /* Pointer to SG list */
+ struct orc_sgent *sgent; /* Pointer to SG list */
int i, count_sg;
- ESCB *pEScb;
-
- pEScb = pSCB->SCB_EScb;
- pEScb->SCB_Srb = SCpnt;
- pSG = NULL;
-
- pSCB->SCB_Opcode = ORC_EXECSCSI;
- pSCB->SCB_Flags = SCF_NO_DCHK; /* Clear done bit */
- pSCB->SCB_Target = SCpnt->device->id;
- pSCB->SCB_Lun = SCpnt->device->lun;
- pSCB->SCB_Reserved0 = 0;
- pSCB->SCB_Reserved1 = 0;
- pSCB->SCB_SGLen = 0;
-
- pSCB->SCB_XferLen = (U32) scsi_bufflen(SCpnt);
- pSG = (ORC_SG *) & pEScb->ESCB_SGList[0];
-
- count_sg = scsi_dma_map(SCpnt);
+ struct orc_extended_scb *escb;
+
+ /* Links between the escb, scb and Linux scsi midlayer cmd */
+ escb = scb->escb;
+ escb->srb = cmd;
+ sgent = NULL;
+
+ /* Set up the SCB to do a SCSI command block */
+ scb->opcode = ORC_EXECSCSI;
+ scb->flags = SCF_NO_DCHK; /* Clear done bit */
+ scb->target = cmd->device->id;
+ scb->lun = cmd->device->lun;
+ scb->reserved0 = 0;
+ scb->reserved1 = 0;
+ scb->sg_len = 0;
+
+ scb->xferlen = (u32) scsi_bufflen(cmd);
+ sgent = (struct orc_sgent *) & escb->sglist[0];
+
+ count_sg = scsi_dma_map(cmd);
BUG_ON(count_sg < 0);
+
+ /* Build the scatter gather lists */
if (count_sg) {
- pSCB->SCB_SGLen = (U32) (count_sg * 8);
- scsi_for_each_sg(SCpnt, sg, count_sg, i) {
- pSG->SG_Ptr = (U32) sg_dma_address(sg);
- pSG->SG_Len = (U32) sg_dma_len(sg);
- pSG++;
+ scb->sg_len = (u32) (count_sg * 8);
+ scsi_for_each_sg(cmd, sg, count_sg, i) {
+ sgent->base = (u32) sg_dma_address(sg);
+ sgent->length = (u32) sg_dma_len(sg);
+ sgent++;
}
} else {
- pSCB->SCB_SGLen = 0;
- pSG->SG_Ptr = 0;
- pSG->SG_Len = 0;
+ scb->sg_len = 0;
+ sgent->base = 0;
+ sgent->length = 0;
}
- pSCB->SCB_SGPAddr = (U32) pSCB->SCB_SensePAddr;
- pSCB->SCB_HaStat = 0;
- pSCB->SCB_TaStat = 0;
- pSCB->SCB_Link = 0xFF;
- pSCB->SCB_SenseLen = SENSE_SIZE;
- pSCB->SCB_CDBLen = SCpnt->cmd_len;
- if (pSCB->SCB_CDBLen >= IMAX_CDB) {
- printk("max cdb length= %x\b", SCpnt->cmd_len);
- pSCB->SCB_CDBLen = IMAX_CDB;
+ scb->sg_addr = (u32) scb->sense_addr;
+ scb->hastat = 0;
+ scb->tastat = 0;
+ scb->link = 0xFF;
+ scb->sense_len = SENSE_SIZE;
+ scb->cdb_len = cmd->cmd_len;
+ if (scb->cdb_len >= IMAX_CDB) {
+ printk("max cdb length= %x\b", cmd->cmd_len);
+ scb->cdb_len = IMAX_CDB;
}
- pSCB->SCB_Ident = SCpnt->device->lun | DISC_ALLOW;
- if (SCpnt->device->tagged_supported) { /* Tag Support */
- pSCB->SCB_TagMsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
+ scb->ident = cmd->device->lun | DISC_ALLOW;
+ if (cmd->device->tagged_supported) { /* Tag Support */
+ scb->tag_msg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
} else {
- pSCB->SCB_TagMsg = 0; /* No tag support */
+ scb->tag_msg = 0; /* No tag support */
}
- memcpy(&pSCB->SCB_CDB[0], &SCpnt->cmnd, pSCB->SCB_CDBLen);
- return;
+ memcpy(&scb->cdb[0], &cmd->cmnd, scb->cdb_len);
}
-/*****************************************************************************
- Function name : inia100_queue
- Description : Queue a command and setup interrupts for a free bus.
- Input : pHCB - Pointer to host adapter structure
- Output : None.
- Return : pSRB - Pointer to SCSI request block.
-*****************************************************************************/
-static int inia100_queue(struct scsi_cmnd * SCpnt, void (*done) (struct scsi_cmnd *))
+/**
+ * inia100_queue - queue command with host
+ * @cmd: Command block
+ * @done: Completion function
+ *
+ * Called by the mid layer to queue a command. Process the command
+ * block, build the host specific scb structures and if there is room
+ * queue the command down to the controller
+ */
+
+static int inia100_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
{
- register ORC_SCB *pSCB;
- ORC_HCS *pHCB; /* Point to Host adapter control block */
+ struct orc_scb *scb;
+ struct orc_host *host; /* Point to Host adapter control block */
- pHCB = (ORC_HCS *) SCpnt->device->host->hostdata;
- SCpnt->scsi_done = done;
+ host = (struct orc_host *) cmd->device->host->hostdata;
+ cmd->scsi_done = done;
/* Get free SCSI control block */
- if ((pSCB = orc_alloc_scb(pHCB)) == NULL)
+ if ((scb = orc_alloc_scb(host)) == NULL)
return SCSI_MLQUEUE_HOST_BUSY;
- inia100BuildSCB(pHCB, pSCB, SCpnt);
- orc_exec_scb(pHCB, pSCB); /* Start execute SCB */
-
- return (0);
+ inia100_build_scb(host, scb, cmd);
+ orc_exec_scb(host, scb); /* Start execute SCB */
+ return 0;
}
/*****************************************************************************
Function name : inia100_abort
Description : Abort a queued command.
(commands that are on the bus can't be aborted easily)
- Input : pHCB - Pointer to host adapter structure
+ Input : host - Pointer to host adapter structure
Output : None.
Return : pSRB - Pointer to SCSI request block.
*****************************************************************************/
-static int inia100_abort(struct scsi_cmnd * SCpnt)
+static int inia100_abort(struct scsi_cmnd * cmd)
{
- ORC_HCS *hcsp;
+ struct orc_host *host;
- hcsp = (ORC_HCS *) SCpnt->device->host->hostdata;
- return orc_abort_srb(hcsp, SCpnt);
+ host = (struct orc_host *) cmd->device->host->hostdata;
+ return inia100_abort_cmd(host, cmd);
}
/*****************************************************************************
Function name : inia100_reset
Description : Reset registers, reset a hanging bus and
kill active and disconnected commands for target w/o soft reset
- Input : pHCB - Pointer to host adapter structure
+ Input : host - Pointer to host adapter structure
Output : None.
Return : pSRB - Pointer to SCSI request block.
*****************************************************************************/
-static int inia100_bus_reset(struct scsi_cmnd * SCpnt)
+static int inia100_bus_reset(struct scsi_cmnd * cmd)
{ /* I need Host Control Block Information */
- ORC_HCS *pHCB;
- pHCB = (ORC_HCS *) SCpnt->device->host->hostdata;
- return orc_reset_scsi_bus(pHCB);
+ struct orc_host *host;
+ host = (struct orc_host *) cmd->device->host->hostdata;
+ return orc_reset_scsi_bus(host);
}
/*****************************************************************************
Function name : inia100_device_reset
Description : Reset the device
- Input : pHCB - Pointer to host adapter structure
+ Input : host - Pointer to host adapter structure
Output : None.
Return : pSRB - Pointer to SCSI request block.
*****************************************************************************/
-static int inia100_device_reset(struct scsi_cmnd * SCpnt)
+static int inia100_device_reset(struct scsi_cmnd * cmd)
{ /* I need Host Control Block Information */
- ORC_HCS *pHCB;
- pHCB = (ORC_HCS *) SCpnt->device->host->hostdata;
- return orc_device_reset(pHCB, SCpnt, scmd_id(SCpnt));
+ struct orc_host *host;
+ host = (struct orc_host *) cmd->device->host->hostdata;
+ return orc_device_reset(host, cmd, scmd_id(cmd));
}
-/*****************************************************************************
- Function name : inia100SCBPost
- Description : This is callback routine be called when orc finish one
- SCSI command.
- Input : pHCB - Pointer to host adapter control block.
- pSCB - Pointer to SCSI control block.
- Output : None.
- Return : None.
-*****************************************************************************/
-static void inia100SCBPost(BYTE * pHcb, BYTE * pScb)
+/**
+ * inia100_scb_handler - interrupt callback
+ * @host: Host causing the interrupt
+ * @scb: SCB the controller returned as needing processing
+ *
+ * Perform completion processing on a control block. Do the conversions
+ * from host to SCSI midlayer error coding, save any sense data and
+ * the complete with the midlayer and recycle the scb.
+ */
+
+static void inia100_scb_handler(struct orc_host *host, struct orc_scb *scb)
{
- struct scsi_cmnd *pSRB; /* Pointer to SCSI request block */
- ORC_HCS *pHCB;
- ORC_SCB *pSCB;
- ESCB *pEScb;
-
- pHCB = (ORC_HCS *) pHcb;
- pSCB = (ORC_SCB *) pScb;
- pEScb = pSCB->SCB_EScb;
- if ((pSRB = (struct scsi_cmnd *) pEScb->SCB_Srb) == 0) {
- printk("inia100SCBPost: SRB pointer is empty\n");
- orc_release_scb(pHCB, pSCB); /* Release SCB for current channel */
+ struct scsi_cmnd *cmd; /* Pointer to SCSI request block */
+ struct orc_extended_scb *escb;
+
+ escb = scb->escb;
+ if ((cmd = (struct scsi_cmnd *) escb->srb) == NULL) {
+ printk(KERN_ERR "inia100_scb_handler: SRB pointer is empty\n");
+ orc_release_scb(host, scb); /* Release SCB for current channel */
return;
}
- pEScb->SCB_Srb = NULL;
+ escb->srb = NULL;
- switch (pSCB->SCB_HaStat) {
+ switch (scb->hastat) {
case 0x0:
case 0xa: /* Linked command complete without error and linked normally */
case 0xb: /* Linked command complete without error interrupt generated */
- pSCB->SCB_HaStat = 0;
+ scb->hastat = 0;
break;
case 0x11: /* Selection time out-The initiator selection or target
reselection was not complete within the SCSI Time out period */
- pSCB->SCB_HaStat = DID_TIME_OUT;
+ scb->hastat = DID_TIME_OUT;
break;
case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
phase sequence was requested by the target. The host adapter
will generate a SCSI Reset Condition, notifying the host with
a SCRD interrupt */
- pSCB->SCB_HaStat = DID_RESET;
+ scb->hastat = DID_RESET;
break;
case 0x1a: /* SCB Aborted. 07/21/98 */
- pSCB->SCB_HaStat = DID_ABORT;
+ scb->hastat = DID_ABORT;
break;
case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid. */
default:
- printk("inia100: %x %x\n", pSCB->SCB_HaStat, pSCB->SCB_TaStat);
- pSCB->SCB_HaStat = DID_ERROR; /* Couldn't find any better */
+ printk(KERN_DEBUG "inia100: %x %x\n", scb->hastat, scb->tastat);
+ scb->hastat = DID_ERROR; /* Couldn't find any better */
break;
}
- if (pSCB->SCB_TaStat == 2) { /* Check condition */
- memcpy((unsigned char *) &pSRB->sense_buffer[0],
- (unsigned char *) &pEScb->ESCB_SGList[0], SENSE_SIZE);
+ if (scb->tastat == 2) { /* Check condition */
+ memcpy((unsigned char *) &cmd->sense_buffer[0],
+ (unsigned char *) &escb->sglist[0], SENSE_SIZE);
}
- pSRB->result = pSCB->SCB_TaStat | (pSCB->SCB_HaStat << 16);
-
- scsi_dma_unmap(pSRB);
-
- pSRB->scsi_done(pSRB); /* Notify system DONE */
-
- orc_release_scb(pHCB, pSCB); /* Release SCB for current channel */
+ cmd->result = scb->tastat | (scb->hastat << 16);
+ scsi_dma_unmap(cmd);
+ cmd->scsi_done(cmd); /* Notify system DONE */
+ orc_release_scb(host, scb); /* Release SCB for current channel */
}
-/*
- * Interrupt handler (main routine of the driver)
+/**
+ * inia100_intr - interrupt handler
+ * @irqno: Interrupt value
+ * @devid: Host adapter
+ *
+ * Entry point for IRQ handling. All the real work is performed
+ * by orc_interrupt.
*/
static irqreturn_t inia100_intr(int irqno, void *devid)
{
- struct Scsi_Host *host = (struct Scsi_Host *)devid;
- ORC_HCS *pHcb = (ORC_HCS *)host->hostdata;
+ struct Scsi_Host *shost = (struct Scsi_Host *)devid;
+ struct orc_host *host = (struct orc_host *)shost->hostdata;
unsigned long flags;
+ irqreturn_t res;
- spin_lock_irqsave(host->host_lock, flags);
- orc_interrupt(pHcb);
- spin_unlock_irqrestore(host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
+ res = orc_interrupt(host);
+ spin_unlock_irqrestore(shost->host_lock, flags);
- return IRQ_HANDLED;
+ return res;
}
static struct scsi_host_template inia100_template = {
const struct pci_device_id *id)
{
struct Scsi_Host *shost;
- ORC_HCS *pHCB;
+ struct orc_host *host;
unsigned long port, bios;
int error = -ENODEV;
u32 sz;
- unsigned long dBiosAdr;
- char *pbBiosAdr;
+ unsigned long biosaddr;
+ char *bios_phys;
if (pci_enable_device(pdev))
goto out;
}
/* <02> read from base address + 0x50 offset to get the bios value. */
- bios = ORC_RDWORD(port, 0x50);
+ bios = inw(port + 0x50);
- shost = scsi_host_alloc(&inia100_template, sizeof(ORC_HCS));
+ shost = scsi_host_alloc(&inia100_template, sizeof(struct orc_host));
if (!shost)
goto out_release_region;
- pHCB = (ORC_HCS *)shost->hostdata;
- pHCB->pdev = pdev;
- pHCB->HCS_Base = port;
- pHCB->HCS_BIOS = bios;
- spin_lock_init(&pHCB->BitAllocFlagLock);
+ host = (struct orc_host *)shost->hostdata;
+ host->pdev = pdev;
+ host->base = port;
+ host->BIOScfg = bios;
+ spin_lock_init(&host->allocation_lock);
/* Get total memory needed for SCB */
- sz = ORC_MAXQUEUE * sizeof(ORC_SCB);
- pHCB->HCS_virScbArray = pci_alloc_consistent(pdev, sz,
- &pHCB->HCS_physScbArray);
- if (!pHCB->HCS_virScbArray) {
+ sz = ORC_MAXQUEUE * sizeof(struct orc_scb);
+ host->scb_virt = pci_alloc_consistent(pdev, sz,
+ &host->scb_phys);
+ if (!host->scb_virt) {
printk("inia100: SCB memory allocation error\n");
goto out_host_put;
}
- memset(pHCB->HCS_virScbArray, 0, sz);
+ memset(host->scb_virt, 0, sz);
/* Get total memory needed for ESCB */
- sz = ORC_MAXQUEUE * sizeof(ESCB);
- pHCB->HCS_virEscbArray = pci_alloc_consistent(pdev, sz,
- &pHCB->HCS_physEscbArray);
- if (!pHCB->HCS_virEscbArray) {
+ sz = ORC_MAXQUEUE * sizeof(struct orc_extended_scb);
+ host->escb_virt = pci_alloc_consistent(pdev, sz,
+ &host->escb_phys);
+ if (!host->escb_virt) {
printk("inia100: ESCB memory allocation error\n");
goto out_free_scb_array;
}
- memset(pHCB->HCS_virEscbArray, 0, sz);
+ memset(host->escb_virt, 0, sz);
- dBiosAdr = pHCB->HCS_BIOS;
- dBiosAdr = (dBiosAdr << 4);
- pbBiosAdr = phys_to_virt(dBiosAdr);
- if (init_orchid(pHCB)) { /* Initialize orchid chip */
+ biosaddr = host->BIOScfg;
+ biosaddr = (biosaddr << 4);
+ bios_phys = phys_to_virt(biosaddr);
+ if (init_orchid(host)) { /* Initialize orchid chip */
printk("inia100: initial orchid fail!!\n");
goto out_free_escb_array;
}
- shost->io_port = pHCB->HCS_Base;
+ shost->io_port = host->base;
shost->n_io_port = 0xff;
shost->can_queue = ORC_MAXQUEUE;
shost->unique_id = shost->io_port;
- shost->max_id = pHCB->HCS_MaxTar;
+ shost->max_id = host->max_targets;
shost->max_lun = 16;
- shost->irq = pHCB->HCS_Intr = pdev->irq;
- shost->this_id = pHCB->HCS_SCSI_ID; /* Assign HCS index */
+ shost->irq = pdev->irq;
+ shost->this_id = host->scsi_id; /* Assign HCS index */
shost->sg_tablesize = TOTAL_SG_ENTRY;
/* Initial orc chip */
scsi_scan_host(shost);
return 0;
- out_free_irq:
+out_free_irq:
free_irq(shost->irq, shost);
- out_free_escb_array:
- pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ESCB),
- pHCB->HCS_virEscbArray, pHCB->HCS_physEscbArray);
- out_free_scb_array:
- pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ORC_SCB),
- pHCB->HCS_virScbArray, pHCB->HCS_physScbArray);
- out_host_put:
+out_free_escb_array:
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_extended_scb),
+ host->escb_virt, host->escb_phys);
+out_free_scb_array:
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_scb),
+ host->scb_virt, host->scb_phys);
+out_host_put:
scsi_host_put(shost);
- out_release_region:
+out_release_region:
release_region(port, 256);
- out_disable_device:
+out_disable_device:
pci_disable_device(pdev);
- out:
+out:
return error;
}
static void __devexit inia100_remove_one(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
- ORC_HCS *pHCB = (ORC_HCS *)shost->hostdata;
+ struct orc_host *host = (struct orc_host *)shost->hostdata;
scsi_remove_host(shost);
free_irq(shost->irq, shost);
- pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ESCB),
- pHCB->HCS_virEscbArray, pHCB->HCS_physEscbArray);
- pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ORC_SCB),
- pHCB->HCS_virScbArray, pHCB->HCS_physScbArray);
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_extended_scb),
+ host->escb_virt, host->escb_phys);
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_scb),
+ host->scb_virt, host->scb_phys);
release_region(shost->io_port, 256);
scsi_host_put(shost);
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * --------------------------------------------------------------------------
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification, immediately at the beginning of the file.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * Where this Software is combined with software released under the terms of
- * the GNU General Public License ("GPL") and the terms of the GPL would require the
- * combined work to also be released under the terms of the GPL, the terms
- * and conditions of this License will apply in addition to those of the
- * GPL with the exception of any terms or conditions of this License that
- * conflict with, or are expressly prohibited by, the GPL.
- *
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
- */
-
-/*
+ *
* Revision History:
* 06/18/98 HL, Initial production Version 1.02
* 12/19/98 bv, Use spinlocks for 2.1.95 and up
* 06/25/02 Doug Ledford <dledford@redhat.com>
* - This and the i60uscsi.h file are almost identical,
* merged them into a single header used by both .c files.
+ * 14/06/07 Alan Cox <alan@redhat.com>
+ * - Grand cleanup and Linuxisation
*/
#define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d"
-#define ULONG unsigned long
-#define USHORT unsigned short
-#define UCHAR unsigned char
-#define BYTE unsigned char
-#define WORD unsigned short
-#define DWORD unsigned long
-#define UBYTE unsigned char
-#define UWORD unsigned short
-#define UDWORD unsigned long
-#define U32 u32
-
#if 1
#define ORC_MAXQUEUE 245
#define ORC_MAXTAGS 64
/************************************************************************/
/* Scatter-Gather Element Structure */
/************************************************************************/
-typedef struct ORC_SG_Struc {
- U32 SG_Ptr; /* Data Pointer */
- U32 SG_Len; /* Data Length */
-} ORC_SG;
+struct orc_sgent {
+ u32 base; /* Data Pointer */
+ u32 length; /* Data Length */
+};
/* SCSI related definition */
#define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */
#define ORC_PRGMCTR1 0xE3 /* RISC program counter */
#define ORC_RISCRAM 0xEC /* RISC RAM data port 4 bytes */
-typedef struct orc_extended_scb { /* Extended SCB */
- ORC_SG ESCB_SGList[TOTAL_SG_ENTRY]; /*0 Start of SG list */
- struct scsi_cmnd *SCB_Srb; /*50 SRB Pointer */
-} ESCB;
+struct orc_extended_scb { /* Extended SCB */
+ struct orc_sgent sglist[TOTAL_SG_ENTRY]; /*0 Start of SG list */
+ struct scsi_cmnd *srb; /*50 SRB Pointer */
+};
/***********************************************************************
SCSI Control Block
+
+ 0x40 bytes long, the last 8 are user bytes
************************************************************************/
-typedef struct orc_scb { /* Scsi_Ctrl_Blk */
- UBYTE SCB_Opcode; /*00 SCB command code&residual */
- UBYTE SCB_Flags; /*01 SCB Flags */
- UBYTE SCB_Target; /*02 Target Id */
- UBYTE SCB_Lun; /*03 Lun */
- U32 SCB_Reserved0; /*04 Reserved for ORCHID must 0 */
- U32 SCB_XferLen; /*08 Data Transfer Length */
- U32 SCB_Reserved1; /*0C Reserved for ORCHID must 0 */
- U32 SCB_SGLen; /*10 SG list # * 8 */
- U32 SCB_SGPAddr; /*14 SG List Buf physical Addr */
- U32 SCB_SGPAddrHigh; /*18 SG Buffer high physical Addr */
- UBYTE SCB_HaStat; /*1C Host Status */
- UBYTE SCB_TaStat; /*1D Target Status */
- UBYTE SCB_Status; /*1E SCB status */
- UBYTE SCB_Link; /*1F Link pointer, default 0xFF */
- UBYTE SCB_SenseLen; /*20 Sense Allocation Length */
- UBYTE SCB_CDBLen; /*21 CDB Length */
- UBYTE SCB_Ident; /*22 Identify */
- UBYTE SCB_TagMsg; /*23 Tag Message */
- UBYTE SCB_CDB[IMAX_CDB]; /*24 SCSI CDBs */
- UBYTE SCB_ScbIdx; /*3C Index for this ORCSCB */
- U32 SCB_SensePAddr; /*34 Sense Buffer physical Addr */
-
- ESCB *SCB_EScb; /*38 Extended SCB Pointer */
-#ifndef ALPHA
- UBYTE SCB_Reserved2[4]; /*3E Reserved for Driver use */
+struct orc_scb { /* Scsi_Ctrl_Blk */
+ u8 opcode; /*00 SCB command code&residual */
+ u8 flags; /*01 SCB Flags */
+ u8 target; /*02 Target Id */
+ u8 lun; /*03 Lun */
+ u32 reserved0; /*04 Reserved for ORCHID must 0 */
+ u32 xferlen; /*08 Data Transfer Length */
+ u32 reserved1; /*0C Reserved for ORCHID must 0 */
+ u32 sg_len; /*10 SG list # * 8 */
+ u32 sg_addr; /*14 SG List Buf physical Addr */
+ u32 sg_addrhigh; /*18 SG Buffer high physical Addr */
+ u8 hastat; /*1C Host Status */
+ u8 tastat; /*1D Target Status */
+ u8 status; /*1E SCB status */
+ u8 link; /*1F Link pointer, default 0xFF */
+ u8 sense_len; /*20 Sense Allocation Length */
+ u8 cdb_len; /*21 CDB Length */
+ u8 ident; /*22 Identify */
+ u8 tag_msg; /*23 Tag Message */
+ u8 cdb[IMAX_CDB]; /*24 SCSI CDBs */
+ u8 scbidx; /*3C Index for this ORCSCB */
+ u32 sense_addr; /*34 Sense Buffer physical Addr */
+
+ struct orc_extended_scb *escb; /*38 Extended SCB Pointer */
+ /* 64bit pointer or 32bit pointer + reserved ? */
+#ifndef CONFIG_64BIT
+ u8 reserved2[4]; /*3E Reserved for Driver use */
#endif
-} ORC_SCB;
+};
/* Opcodes of ORCSCB_Opcode */
#define ORC_EXECSCSI 0x00 /* SCSI initiator command with residual */
Target Device Control Structure
**********************************************************************/
-typedef struct ORC_Tar_Ctrl_Struc {
- UBYTE TCS_DrvDASD; /* 6 */
- UBYTE TCS_DrvSCSI; /* 7 */
- UBYTE TCS_DrvHead; /* 8 */
- UWORD TCS_DrvFlags; /* 4 */
- UBYTE TCS_DrvSector; /* 7 */
-} ORC_TCS;
+struct orc_target {
+ u8 TCS_DrvDASD; /* 6 */
+ u8 TCS_DrvSCSI; /* 7 */
+ u8 TCS_DrvHead; /* 8 */
+ u16 TCS_DrvFlags; /* 4 */
+ u8 TCS_DrvSector; /* 7 */
+};
/* Bit Definition for TCF_DrvFlags */
#define TCS_DF_NODASD_SUPT 0x20 /* Suppress OS/2 DASD Mgr support */
/***********************************************************************
Host Adapter Control Structure
************************************************************************/
-typedef struct ORC_Ha_Ctrl_Struc {
- USHORT HCS_Base; /* 00 */
- UBYTE HCS_Index; /* 02 */
- UBYTE HCS_Intr; /* 04 */
- UBYTE HCS_SCSI_ID; /* 06 H/A SCSI ID */
- UBYTE HCS_BIOS; /* 07 BIOS configuration */
-
- UBYTE HCS_Flags; /* 0B */
- UBYTE HCS_HAConfig1; /* 1B SCSI0MAXTags */
- UBYTE HCS_MaxTar; /* 1B SCSI0MAXTags */
-
- USHORT HCS_Units; /* Number of units this adapter */
- USHORT HCS_AFlags; /* Adapter info. defined flags */
- ULONG HCS_Timeout; /* Adapter timeout value */
- ORC_SCB *HCS_virScbArray; /* 28 Virtual Pointer to SCB array */
- dma_addr_t HCS_physScbArray; /* Scb Physical address */
- ESCB *HCS_virEscbArray; /* Virtual pointer to ESCB Scatter list */
- dma_addr_t HCS_physEscbArray; /* scatter list Physical address */
- UBYTE TargetFlag[16]; /* 30 target configuration, TCF_EN_TAG */
- UBYTE MaximumTags[16]; /* 40 ORC_MAX_SCBS */
- UBYTE ActiveTags[16][16]; /* 50 */
- ORC_TCS HCS_Tcs[16]; /* 28 */
- U32 BitAllocFlag[MAX_CHANNELS][8]; /* Max STB is 256, So 256/32 */
- spinlock_t BitAllocFlagLock;
+struct orc_host {
+ unsigned long base; /* Base address */
+ u8 index; /* Index (Channel)*/
+ u8 scsi_id; /* H/A SCSI ID */
+ u8 BIOScfg; /*BIOS configuration */
+ u8 flags;
+ u8 max_targets; /* SCSI0MAXTags */
+ struct orc_scb *scb_virt; /* Virtual Pointer to SCB array */
+ dma_addr_t scb_phys; /* Scb Physical address */
+ struct orc_extended_scb *escb_virt; /* Virtual pointer to ESCB Scatter list */
+ dma_addr_t escb_phys; /* scatter list Physical address */
+ u8 target_flag[16]; /* target configuration, TCF_EN_TAG */
+ u8 max_tags[16]; /* ORC_MAX_SCBS */
+ u32 allocation_map[MAX_CHANNELS][8]; /* Max STB is 256, So 256/32 */
+ spinlock_t allocation_lock;
struct pci_dev *pdev;
-} ORC_HCS;
+};
/* Bit Definition for HCS_Flags */
#define HCS_AF_DISABLE_RESET 0x10 /* Adapter disable reset */
#define HCS_AF_DISABLE_ADPT 0x80 /* Adapter disable */
-typedef struct _NVRAM {
+struct orc_nvram {
/*----------header ---------------*/
- UCHAR SubVendorID0; /* 00 - Sub Vendor ID */
- UCHAR SubVendorID1; /* 00 - Sub Vendor ID */
- UCHAR SubSysID0; /* 02 - Sub System ID */
- UCHAR SubSysID1; /* 02 - Sub System ID */
- UCHAR SubClass; /* 04 - Sub Class */
- UCHAR VendorID0; /* 05 - Vendor ID */
- UCHAR VendorID1; /* 05 - Vendor ID */
- UCHAR DeviceID0; /* 07 - Device ID */
- UCHAR DeviceID1; /* 07 - Device ID */
- UCHAR Reserved0[2]; /* 09 - Reserved */
- UCHAR Revision; /* 0B - Revision of data structure */
+ u8 SubVendorID0; /* 00 - Sub Vendor ID */
+ u8 SubVendorID1; /* 00 - Sub Vendor ID */
+ u8 SubSysID0; /* 02 - Sub System ID */
+ u8 SubSysID1; /* 02 - Sub System ID */
+ u8 SubClass; /* 04 - Sub Class */
+ u8 VendorID0; /* 05 - Vendor ID */
+ u8 VendorID1; /* 05 - Vendor ID */
+ u8 DeviceID0; /* 07 - Device ID */
+ u8 DeviceID1; /* 07 - Device ID */
+ u8 Reserved0[2]; /* 09 - Reserved */
+ u8 revision; /* 0B - revision of data structure */
/* ----Host Adapter Structure ---- */
- UCHAR NumOfCh; /* 0C - Number of SCSI channel */
- UCHAR BIOSConfig1; /* 0D - BIOS configuration 1 */
- UCHAR BIOSConfig2; /* 0E - BIOS boot channel&target ID */
- UCHAR BIOSConfig3; /* 0F - BIOS configuration 3 */
+ u8 NumOfCh; /* 0C - Number of SCSI channel */
+ u8 BIOSConfig1; /* 0D - BIOS configuration 1 */
+ u8 BIOSConfig2; /* 0E - BIOS boot channel&target ID */
+ u8 BIOSConfig3; /* 0F - BIOS configuration 3 */
/* ----SCSI channel Structure ---- */
/* from "CTRL-I SCSI Host Adapter SetUp menu " */
- UCHAR SCSI0Id; /* 10 - Channel 0 SCSI ID */
- UCHAR SCSI0Config; /* 11 - Channel 0 SCSI configuration */
- UCHAR SCSI0MaxTags; /* 12 - Channel 0 Maximum tags */
- UCHAR SCSI0ResetTime; /* 13 - Channel 0 Reset recovering time */
- UCHAR ReservedforChannel0[2]; /* 14 - Reserved */
+ u8 scsi_id; /* 10 - Channel 0 SCSI ID */
+ u8 SCSI0Config; /* 11 - Channel 0 SCSI configuration */
+ u8 SCSI0MaxTags; /* 12 - Channel 0 Maximum tags */
+ u8 SCSI0ResetTime; /* 13 - Channel 0 Reset recovering time */
+ u8 ReservedforChannel0[2]; /* 14 - Reserved */
/* ----SCSI target Structure ---- */
/* from "CTRL-I SCSI device SetUp menu " */
- UCHAR Target00Config; /* 16 - Channel 0 Target 0 config */
- UCHAR Target01Config; /* 17 - Channel 0 Target 1 config */
- UCHAR Target02Config; /* 18 - Channel 0 Target 2 config */
- UCHAR Target03Config; /* 19 - Channel 0 Target 3 config */
- UCHAR Target04Config; /* 1A - Channel 0 Target 4 config */
- UCHAR Target05Config; /* 1B - Channel 0 Target 5 config */
- UCHAR Target06Config; /* 1C - Channel 0 Target 6 config */
- UCHAR Target07Config; /* 1D - Channel 0 Target 7 config */
- UCHAR Target08Config; /* 1E - Channel 0 Target 8 config */
- UCHAR Target09Config; /* 1F - Channel 0 Target 9 config */
- UCHAR Target0AConfig; /* 20 - Channel 0 Target A config */
- UCHAR Target0BConfig; /* 21 - Channel 0 Target B config */
- UCHAR Target0CConfig; /* 22 - Channel 0 Target C config */
- UCHAR Target0DConfig; /* 23 - Channel 0 Target D config */
- UCHAR Target0EConfig; /* 24 - Channel 0 Target E config */
- UCHAR Target0FConfig; /* 25 - Channel 0 Target F config */
-
- UCHAR SCSI1Id; /* 26 - Channel 1 SCSI ID */
- UCHAR SCSI1Config; /* 27 - Channel 1 SCSI configuration */
- UCHAR SCSI1MaxTags; /* 28 - Channel 1 Maximum tags */
- UCHAR SCSI1ResetTime; /* 29 - Channel 1 Reset recovering time */
- UCHAR ReservedforChannel1[2]; /* 2A - Reserved */
+ u8 Target00Config; /* 16 - Channel 0 Target 0 config */
+ u8 Target01Config; /* 17 - Channel 0 Target 1 config */
+ u8 Target02Config; /* 18 - Channel 0 Target 2 config */
+ u8 Target03Config; /* 19 - Channel 0 Target 3 config */
+ u8 Target04Config; /* 1A - Channel 0 Target 4 config */
+ u8 Target05Config; /* 1B - Channel 0 Target 5 config */
+ u8 Target06Config; /* 1C - Channel 0 Target 6 config */
+ u8 Target07Config; /* 1D - Channel 0 Target 7 config */
+ u8 Target08Config; /* 1E - Channel 0 Target 8 config */
+ u8 Target09Config; /* 1F - Channel 0 Target 9 config */
+ u8 Target0AConfig; /* 20 - Channel 0 Target A config */
+ u8 Target0BConfig; /* 21 - Channel 0 Target B config */
+ u8 Target0CConfig; /* 22 - Channel 0 Target C config */
+ u8 Target0DConfig; /* 23 - Channel 0 Target D config */
+ u8 Target0EConfig; /* 24 - Channel 0 Target E config */
+ u8 Target0FConfig; /* 25 - Channel 0 Target F config */
+
+ u8 SCSI1Id; /* 26 - Channel 1 SCSI ID */
+ u8 SCSI1Config; /* 27 - Channel 1 SCSI configuration */
+ u8 SCSI1MaxTags; /* 28 - Channel 1 Maximum tags */
+ u8 SCSI1ResetTime; /* 29 - Channel 1 Reset recovering time */
+ u8 ReservedforChannel1[2]; /* 2A - Reserved */
/* ----SCSI target Structure ---- */
/* from "CTRL-I SCSI device SetUp menu " */
- UCHAR Target10Config; /* 2C - Channel 1 Target 0 config */
- UCHAR Target11Config; /* 2D - Channel 1 Target 1 config */
- UCHAR Target12Config; /* 2E - Channel 1 Target 2 config */
- UCHAR Target13Config; /* 2F - Channel 1 Target 3 config */
- UCHAR Target14Config; /* 30 - Channel 1 Target 4 config */
- UCHAR Target15Config; /* 31 - Channel 1 Target 5 config */
- UCHAR Target16Config; /* 32 - Channel 1 Target 6 config */
- UCHAR Target17Config; /* 33 - Channel 1 Target 7 config */
- UCHAR Target18Config; /* 34 - Channel 1 Target 8 config */
- UCHAR Target19Config; /* 35 - Channel 1 Target 9 config */
- UCHAR Target1AConfig; /* 36 - Channel 1 Target A config */
- UCHAR Target1BConfig; /* 37 - Channel 1 Target B config */
- UCHAR Target1CConfig; /* 38 - Channel 1 Target C config */
- UCHAR Target1DConfig; /* 39 - Channel 1 Target D config */
- UCHAR Target1EConfig; /* 3A - Channel 1 Target E config */
- UCHAR Target1FConfig; /* 3B - Channel 1 Target F config */
- UCHAR reserved[3]; /* 3C - Reserved */
+ u8 Target10Config; /* 2C - Channel 1 Target 0 config */
+ u8 Target11Config; /* 2D - Channel 1 Target 1 config */
+ u8 Target12Config; /* 2E - Channel 1 Target 2 config */
+ u8 Target13Config; /* 2F - Channel 1 Target 3 config */
+ u8 Target14Config; /* 30 - Channel 1 Target 4 config */
+ u8 Target15Config; /* 31 - Channel 1 Target 5 config */
+ u8 Target16Config; /* 32 - Channel 1 Target 6 config */
+ u8 Target17Config; /* 33 - Channel 1 Target 7 config */
+ u8 Target18Config; /* 34 - Channel 1 Target 8 config */
+ u8 Target19Config; /* 35 - Channel 1 Target 9 config */
+ u8 Target1AConfig; /* 36 - Channel 1 Target A config */
+ u8 Target1BConfig; /* 37 - Channel 1 Target B config */
+ u8 Target1CConfig; /* 38 - Channel 1 Target C config */
+ u8 Target1DConfig; /* 39 - Channel 1 Target D config */
+ u8 Target1EConfig; /* 3A - Channel 1 Target E config */
+ u8 Target1FConfig; /* 3B - Channel 1 Target F config */
+ u8 reserved[3]; /* 3C - Reserved */
/* ---------- CheckSum ---------- */
- UCHAR CheckSum; /* 3F - Checksum of NVRam */
-} NVRAM, *PNVRAM;
+ u8 CheckSum; /* 3F - Checksum of NVRam */
+};
/* Bios Configuration for nvram->BIOSConfig1 */
#define NBC_BIOSENABLE 0x01 /* BIOS enable */
#define NCC_RESET_TIME 0x0A /* SCSI RESET recovering time */
#define NTC_DEFAULT (NTC_1GIGA | NTC_NO_WIDESYNC | NTC_DISC_ENABLE)
-#define ORC_RD(x,y) (UCHAR)(inb( (int)((ULONG)((ULONG)x+(UCHAR)y)) ))
-#define ORC_RDWORD(x,y) (short)(inl((int)((ULONG)((ULONG)x+(UCHAR)y)) ))
-#define ORC_RDLONG(x,y) (long)(inl((int)((ULONG)((ULONG)x+(UCHAR)y)) ))
-
-#define ORC_WR( adr,data) outb( (UCHAR)(data), (int)(adr))
-#define ORC_WRSHORT(adr,data) outw( (UWORD)(data), (int)(adr))
-#define ORC_WRLONG( adr,data) outl( (ULONG)(data), (int)(adr))
projects / linux-2.6-omap-h63xx.git / commitdiff