--- /dev/null
+MMC/SD/SDIO slot directly connected to a SPI bus
+
+Required properties:
+- compatible : should be "mmc-spi-slot".
+- reg : should specify SPI address (chip-select number).
+- spi-max-frequency : maximum frequency for this device (Hz).
+- voltage-ranges : two cells are required, first cell specifies minimum
+  slot voltage (mV), second cell specifies maximum slot voltage (mV).
+  Several ranges could be specified.
+- gpios : (optional) may specify GPIOs in this order: Card-Detect GPIO,
+  Write-Protect GPIO.
+
+Example:
+
+       mmc-slot@0 {
+               compatible = "fsl,mpc8323rdb-mmc-slot",
+                            "mmc-spi-slot";
+               reg = <0>;
+               gpios = <&qe_pio_d 14 1
+                        &qe_pio_d 15 0>;
+               voltage-ranges = <3300 3300>;
+               spi-max-frequency = <50000000>;
+       };
 
 };
 static struct of_modalias_table of_modalias_table[] = {
        { "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
+       { "mmc-spi-slot", "mmc_spi" },
 };
 
 /**