* own interruptible routines.
*/
static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
-{
+{
struct api_context ctx;
unsigned long expire;
int retval;
}
/*-------------------------------------------------------------------*/
-// returns status (negative) or length (positive)
+/* returns status (negative) or length (positive) */
static int usb_internal_control_msg(struct usb_device *usb_dev,
- unsigned int pipe,
+ unsigned int pipe,
struct usb_ctrlrequest *cmd,
void *data, int len, int timeout)
{
urb = usb_alloc_urb(0, GFP_NOIO);
if (!urb)
return -ENOMEM;
-
+
usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data,
len, usb_api_blocking_completion, NULL);
}
/**
- * usb_control_msg - Builds a control urb, sends it off and waits for completion
- * @dev: pointer to the usb device to send the message to
- * @pipe: endpoint "pipe" to send the message to
- * @request: USB message request value
- * @requesttype: USB message request type value
- * @value: USB message value
- * @index: USB message index value
- * @data: pointer to the data to send
- * @size: length in bytes of the data to send
- * @timeout: time in msecs to wait for the message to complete before
- * timing out (if 0 the wait is forever)
- * Context: !in_interrupt ()
- *
- * This function sends a simple control message to a specified endpoint
- * and waits for the message to complete, or timeout.
- *
- * If successful, it returns the number of bytes transferred, otherwise a negative error number.
- *
- * Don't use this function from within an interrupt context, like a
- * bottom half handler. If you need an asynchronous message, or need to send
- * a message from within interrupt context, use usb_submit_urb()
- * If a thread in your driver uses this call, make sure your disconnect()
- * method can wait for it to complete. Since you don't have a handle on
- * the URB used, you can't cancel the request.
+ * usb_control_msg - Builds a control urb, sends it off and waits for completion
+ * @dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @request: USB message request value
+ * @requesttype: USB message request type value
+ * @value: USB message value
+ * @index: USB message index value
+ * @data: pointer to the data to send
+ * @size: length in bytes of the data to send
+ * @timeout: time in msecs to wait for the message to complete before timing
+ * out (if 0 the wait is forever)
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a simple control message to a specified endpoint and
+ * waits for the message to complete, or timeout.
+ *
+ * If successful, it returns the number of bytes transferred, otherwise a
+ * negative error number.
+ *
+ * Don't use this function from within an interrupt context, like a bottom half
+ * handler. If you need an asynchronous message, or need to send a message
+ * from within interrupt context, use usb_submit_urb().
+ * If a thread in your driver uses this call, make sure your disconnect()
+ * method can wait for it to complete. Since you don't have a handle on the
+ * URB used, you can't cancel the request.
*/
-int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype,
- __u16 value, __u16 index, void *data, __u16 size, int timeout)
+int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
+ __u8 requesttype, __u16 value, __u16 index, void *data,
+ __u16 size, int timeout)
{
- struct usb_ctrlrequest *dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+ struct usb_ctrlrequest *dr;
int ret;
-
+
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
if (!dr)
return -ENOMEM;
- dr->bRequestType= requesttype;
+ dr->bRequestType = requesttype;
dr->bRequest = request;
dr->wValue = cpu_to_le16p(&value);
dr->wIndex = cpu_to_le16p(&index);
dr->wLength = cpu_to_le16p(&size);
- //dbg("usb_control_msg");
+ /* dbg("usb_control_msg"); */
ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout);
* @pipe: endpoint "pipe" to send the message to
* @data: pointer to the data to send
* @len: length in bytes of the data to send
- * @actual_length: pointer to a location to put the actual length transferred in bytes
+ * @actual_length: pointer to a location to put the actual length transferred
+ * in bytes
* @timeout: time in msecs to wait for the message to complete before
* timing out (if 0 the wait is forever)
+ *
* Context: !in_interrupt ()
*
* This function sends a simple interrupt message to a specified endpoint and
EXPORT_SYMBOL_GPL(usb_interrupt_msg);
/**
- * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion
- * @usb_dev: pointer to the usb device to send the message to
- * @pipe: endpoint "pipe" to send the message to
- * @data: pointer to the data to send
- * @len: length in bytes of the data to send
- * @actual_length: pointer to a location to put the actual length transferred in bytes
- * @timeout: time in msecs to wait for the message to complete before
- * timing out (if 0 the wait is forever)
- * Context: !in_interrupt ()
- *
- * This function sends a simple bulk message to a specified endpoint
- * and waits for the message to complete, or timeout.
- *
- * If successful, it returns 0, otherwise a negative error number.
- * The number of actual bytes transferred will be stored in the
- * actual_length paramater.
- *
- * Don't use this function from within an interrupt context, like a
- * bottom half handler. If you need an asynchronous message, or need to
- * send a message from within interrupt context, use usb_submit_urb()
- * If a thread in your driver uses this call, make sure your disconnect()
- * method can wait for it to complete. Since you don't have a handle on
- * the URB used, you can't cancel the request.
- *
- * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT
- * ioctl, users are forced to abuse this routine by using it to submit
- * URBs for interrupt endpoints. We will take the liberty of creating
- * an interrupt URB (with the default interval) if the target is an
- * interrupt endpoint.
+ * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion
+ * @usb_dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @data: pointer to the data to send
+ * @len: length in bytes of the data to send
+ * @actual_length: pointer to a location to put the actual length transferred
+ * in bytes
+ * @timeout: time in msecs to wait for the message to complete before
+ * timing out (if 0 the wait is forever)
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a simple bulk message to a specified endpoint
+ * and waits for the message to complete, or timeout.
+ *
+ * If successful, it returns 0, otherwise a negative error number. The number
+ * of actual bytes transferred will be stored in the actual_length paramater.
+ *
+ * Don't use this function from within an interrupt context, like a bottom half
+ * handler. If you need an asynchronous message, or need to send a message
+ * from within interrupt context, use usb_submit_urb() If a thread in your
+ * driver uses this call, make sure your disconnect() method can wait for it to
+ * complete. Since you don't have a handle on the URB used, you can't cancel
+ * the request.
+ *
+ * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT ioctl,
+ * users are forced to abuse this routine by using it to submit URBs for
+ * interrupt endpoints. We will take the liberty of creating an interrupt URB
+ * (with the default interval) if the target is an interrupt endpoint.
*/
-int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
- void *data, int len, int *actual_length, int timeout)
+int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
+ void *data, int len, int *actual_length, int timeout)
{
struct urb *urb;
struct usb_host_endpoint *ep;
/*-------------------------------------------------------------------*/
-static void sg_clean (struct usb_sg_request *io)
+static void sg_clean(struct usb_sg_request *io)
{
if (io->urbs) {
while (io->entries--)
- usb_free_urb (io->urbs [io->entries]);
- kfree (io->urbs);
+ usb_free_urb(io->urbs [io->entries]);
+ kfree(io->urbs);
io->urbs = NULL;
}
if (io->dev->dev.dma_mask != NULL)
- usb_buffer_unmap_sg (io->dev, usb_pipein(io->pipe),
- io->sg, io->nents);
+ usb_buffer_unmap_sg(io->dev, usb_pipein(io->pipe),
+ io->sg, io->nents);
io->dev = NULL;
}
-static void sg_complete (struct urb *urb)
+static void sg_complete(struct urb *urb)
{
- struct usb_sg_request *io = urb->context;
+ struct usb_sg_request *io = urb->context;
int status = urb->status;
- spin_lock (&io->lock);
+ spin_lock(&io->lock);
/* In 2.5 we require hcds' endpoint queues not to progress after fault
* reports, until the completion callback (this!) returns. That lets
&& (io->status != -ECONNRESET
|| status != -ECONNRESET)
&& urb->actual_length) {
- dev_err (io->dev->bus->controller,
+ dev_err(io->dev->bus->controller,
"dev %s ep%d%s scatterlist error %d/%d\n",
io->dev->devpath,
usb_endpoint_num(&urb->ep->desc),
usb_urb_dir_in(urb) ? "in" : "out",
status, io->status);
- // BUG ();
+ /* BUG (); */
}
if (io->status == 0 && status && status != -ECONNRESET) {
* unlink pending urbs so they won't rx/tx bad data.
* careful: unlink can sometimes be synchronous...
*/
- spin_unlock (&io->lock);
+ spin_unlock(&io->lock);
for (i = 0, found = 0; i < io->entries; i++) {
if (!io->urbs [i] || !io->urbs [i]->dev)
continue;
if (found) {
- retval = usb_unlink_urb (io->urbs [i]);
+ retval = usb_unlink_urb(io->urbs [i]);
if (retval != -EINPROGRESS &&
retval != -ENODEV &&
retval != -EBUSY)
- dev_err (&io->dev->dev,
+ dev_err(&io->dev->dev,
"%s, unlink --> %d\n",
__FUNCTION__, retval);
} else if (urb == io->urbs [i])
found = 1;
}
- spin_lock (&io->lock);
+ spin_lock(&io->lock);
}
urb->dev = NULL;
io->bytes += urb->actual_length;
io->count--;
if (!io->count)
- complete (&io->complete);
+ complete(&io->complete);
- spin_unlock (&io->lock);
+ spin_unlock(&io->lock);
}
* The request may be canceled with usb_sg_cancel(), either before or after
* usb_sg_wait() is called.
*/
-int usb_sg_init (
- struct usb_sg_request *io,
- struct usb_device *dev,
- unsigned pipe,
- unsigned period,
- struct scatterlist *sg,
- int nents,
- size_t length,
- gfp_t mem_flags
-)
+int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
+ unsigned pipe, unsigned period, struct scatterlist *sg,
+ int nents, size_t length, gfp_t mem_flags)
{
- int i;
- int urb_flags;
- int dma;
+ int i;
+ int urb_flags;
+ int dma;
if (!io || !dev || !sg
- || usb_pipecontrol (pipe)
- || usb_pipeisoc (pipe)
+ || usb_pipecontrol(pipe)
+ || usb_pipeisoc(pipe)
|| nents <= 0)
return -EINVAL;
- spin_lock_init (&io->lock);
+ spin_lock_init(&io->lock);
io->dev = dev;
io->pipe = pipe;
io->sg = sg;
dma = (dev->dev.dma_mask != NULL);
if (dma)
io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe),
- sg, nents);
+ sg, nents);
else
io->entries = nents;
return io->entries;
io->count = io->entries;
- io->urbs = kmalloc (io->entries * sizeof *io->urbs, mem_flags);
+ io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
if (!io->urbs)
goto nomem;
urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
- if (usb_pipein (pipe))
+ if (usb_pipein(pipe))
urb_flags |= URB_SHORT_NOT_OK;
for (i = 0; i < io->entries; i++) {
- unsigned len;
+ unsigned len;
- io->urbs [i] = usb_alloc_urb (0, mem_flags);
- if (!io->urbs [i]) {
+ io->urbs[i] = usb_alloc_urb(0, mem_flags);
+ if (!io->urbs[i]) {
io->entries = i;
goto nomem;
}
- io->urbs [i]->dev = NULL;
- io->urbs [i]->pipe = pipe;
- io->urbs [i]->interval = period;
- io->urbs [i]->transfer_flags = urb_flags;
+ io->urbs[i]->dev = NULL;
+ io->urbs[i]->pipe = pipe;
+ io->urbs[i]->interval = period;
+ io->urbs[i]->transfer_flags = urb_flags;
- io->urbs [i]->complete = sg_complete;
- io->urbs [i]->context = io;
+ io->urbs[i]->complete = sg_complete;
+ io->urbs[i]->context = io;
/*
* Some systems need to revert to PIO when DMA is temporarily
* to prevent stale pointers and to help spot bugs.
*/
if (dma) {
- io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
- len = sg_dma_len (sg + i);
+ io->urbs[i]->transfer_dma = sg_dma_address(sg + i);
+ len = sg_dma_len(sg + i);
#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
io->urbs[i]->transfer_buffer = NULL;
#else
#endif
} else {
/* hc may use _only_ transfer_buffer */
- io->urbs [i]->transfer_buffer = sg_virt(&sg[i]);
- len = sg [i].length;
+ io->urbs[i]->transfer_buffer = sg_virt(&sg[i]);
+ len = sg[i].length;
}
if (length) {
- len = min_t (unsigned, len, length);
+ len = min_t(unsigned, len, length);
length -= len;
if (length == 0)
io->entries = i + 1;
}
- io->urbs [i]->transfer_buffer_length = len;
+ io->urbs[i]->transfer_buffer_length = len;
}
- io->urbs [--i]->transfer_flags &= ~URB_NO_INTERRUPT;
+ io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
/* transaction state */
io->status = 0;
io->bytes = 0;
- init_completion (&io->complete);
+ init_completion(&io->complete);
return 0;
nomem:
- sg_clean (io);
+ sg_clean(io);
return -ENOMEM;
}
EXPORT_SYMBOL_GPL(usb_sg_init);
* speed interrupt endpoints, which allow at most one packet per millisecond,
* of at most 8 or 64 bytes (respectively).
*/
-void usb_sg_wait (struct usb_sg_request *io)
+void usb_sg_wait(struct usb_sg_request *io)
{
- int i, entries = io->entries;
+ int i;
+ int entries = io->entries;
/* queue the urbs. */
- spin_lock_irq (&io->lock);
+ spin_lock_irq(&io->lock);
i = 0;
while (i < entries && !io->status) {
- int retval;
+ int retval;
- io->urbs [i]->dev = io->dev;
- retval = usb_submit_urb (io->urbs [i], GFP_ATOMIC);
+ io->urbs[i]->dev = io->dev;
+ retval = usb_submit_urb(io->urbs [i], GFP_ATOMIC);
/* after we submit, let completions or cancelations fire;
* we handshake using io->status.
*/
- spin_unlock_irq (&io->lock);
+ spin_unlock_irq(&io->lock);
switch (retval) {
/* maybe we retrying will recover */
- case -ENXIO: // hc didn't queue this one
+ case -ENXIO: /* hc didn't queue this one */
case -EAGAIN:
case -ENOMEM:
io->urbs[i]->dev = NULL;
retval = 0;
- yield ();
+ yield();
break;
/* no error? continue immediately.
*/
case 0:
++i;
- cpu_relax ();
+ cpu_relax();
break;
/* fail any uncompleted urbs */
default:
- io->urbs [i]->dev = NULL;
- io->urbs [i]->status = retval;
- dev_dbg (&io->dev->dev, "%s, submit --> %d\n",
+ io->urbs[i]->dev = NULL;
+ io->urbs[i]->status = retval;
+ dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
__FUNCTION__, retval);
- usb_sg_cancel (io);
+ usb_sg_cancel(io);
}
- spin_lock_irq (&io->lock);
+ spin_lock_irq(&io->lock);
if (retval && (io->status == 0 || io->status == -ECONNRESET))
io->status = retval;
}
io->count -= entries - i;
if (io->count == 0)
- complete (&io->complete);
- spin_unlock_irq (&io->lock);
+ complete(&io->complete);
+ spin_unlock_irq(&io->lock);
/* OK, yes, this could be packaged as non-blocking.
* So could the submit loop above ... but it's easier to
* solve neither problem than to solve both!
*/
- wait_for_completion (&io->complete);
+ wait_for_completion(&io->complete);
- sg_clean (io);
+ sg_clean(io);
}
EXPORT_SYMBOL_GPL(usb_sg_wait);
* It can also prevents one initialized by usb_sg_init() from starting,
* so that call just frees resources allocated to the request.
*/
-void usb_sg_cancel (struct usb_sg_request *io)
+void usb_sg_cancel(struct usb_sg_request *io)
{
- unsigned long flags;
+ unsigned long flags;
- spin_lock_irqsave (&io->lock, flags);
+ spin_lock_irqsave(&io->lock, flags);
/* shut everything down, if it didn't already */
if (!io->status) {
- int i;
+ int i;
io->status = -ECONNRESET;
- spin_unlock (&io->lock);
+ spin_unlock(&io->lock);
for (i = 0; i < io->entries; i++) {
- int retval;
+ int retval;
if (!io->urbs [i]->dev)
continue;
- retval = usb_unlink_urb (io->urbs [i]);
+ retval = usb_unlink_urb(io->urbs [i]);
if (retval != -EINPROGRESS && retval != -EBUSY)
- dev_warn (&io->dev->dev, "%s, unlink --> %d\n",
+ dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
__FUNCTION__, retval);
}
- spin_lock (&io->lock);
+ spin_lock(&io->lock);
}
- spin_unlock_irqrestore (&io->lock, flags);
+ spin_unlock_irqrestore(&io->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_sg_cancel);
* Returns the number of bytes received on success, or else the status code
* returned by the underlying usb_control_msg() call.
*/
-int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char index, void *buf, int size)
+int usb_get_descriptor(struct usb_device *dev, unsigned char type,
+ unsigned char index, void *buf, int size)
{
int i;
int result;
-
- memset(buf,0,size); // Make sure we parse really received data
+
+ memset(buf, 0, size); /* Make sure we parse really received data */
for (i = 0; i < 3; ++i) {
/* retry on length 0 or error; some devices are flakey */
}
static int usb_string_sub(struct usb_device *dev, unsigned int langid,
- unsigned int index, unsigned char *buf)
+ unsigned int index, unsigned char *buf)
{
int rc;
* @buf: where to put the string
* @size: how big is "buf"?
* Context: !in_interrupt ()
- *
+ *
* This converts the UTF-16LE encoded strings returned by devices, from
* usb_get_string_descriptor(), to null-terminated ISO-8859-1 encoded ones
* that are more usable in most kernel contexts. Note that all characters
if (!dev->have_langid) {
err = usb_string_sub(dev, 0, 0, tbuf);
if (err < 0) {
- dev_err (&dev->dev,
+ dev_err(&dev->dev,
"string descriptor 0 read error: %d\n",
err);
goto errout;
} else if (err < 4) {
- dev_err (&dev->dev, "string descriptor 0 too short\n");
+ dev_err(&dev->dev, "string descriptor 0 too short\n");
err = -EINVAL;
goto errout;
} else {
dev->have_langid = 1;
- dev->string_langid = tbuf[2] | (tbuf[3]<< 8);
- /* always use the first langid listed */
- dev_dbg (&dev->dev, "default language 0x%04x\n",
+ dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+ /* always use the first langid listed */
+ dev_dbg(&dev->dev, "default language 0x%04x\n",
dev->string_langid);
}
}
-
+
err = usb_string_sub(dev, dev->string_langid, index, tbuf);
if (err < 0)
goto errout;
err = idx;
if (tbuf[1] != USB_DT_STRING)
- dev_dbg(&dev->dev, "wrong descriptor type %02x for string %d (\"%s\")\n", tbuf[1], index, buf);
+ dev_dbg(&dev->dev,
+ "wrong descriptor type %02x for string %d (\"%s\")\n",
+ tbuf[1], index, buf);
errout:
kfree(tbuf);
char *smallbuf = NULL;
int len;
- if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) {
- if ((len = usb_string(udev, index, buf, 256)) > 0) {
- if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL)
+ if (index <= 0)
+ return NULL;
+
+ buf = kmalloc(256, GFP_KERNEL);
+ if (buf) {
+ len = usb_string(udev, index, buf, 256);
+ if (len > 0) {
+ smallbuf = kmalloc(++len, GFP_KERNEL);
+ if (!smallbuf)
return buf;
memcpy(smallbuf, buf, len);
}
return -ENOMEM;
ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, size);
- if (ret >= 0)
+ if (ret >= 0)
memcpy(&dev->descriptor, desc, size);
kfree(desc);
return ret;
{
int result;
int endp = usb_pipeendpoint(pipe);
-
- if (usb_pipein (pipe))
+
+ if (usb_pipein(pipe))
endp |= USB_DIR_IN;
/* we don't care if it wasn't halted first. in fact some devices
}
}
-/*
+/**
* usb_disable_device - Disable all the endpoints for a USB device
* @dev: the device whose endpoints are being disabled
* @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
int i;
dev_dbg(&dev->dev, "%s nuking %s URBs\n", __FUNCTION__,
- skip_ep0 ? "non-ep0" : "all");
+ skip_ep0 ? "non-ep0" : "all");
for (i = skip_ep0; i < 16; ++i) {
usb_disable_endpoint(dev, i);
usb_disable_endpoint(dev, i + USB_DIR_IN);
interface = dev->actconfig->interface[i];
if (!device_is_registered(&interface->dev))
continue;
- dev_dbg (&dev->dev, "unregistering interface %s\n",
+ dev_dbg(&dev->dev, "unregistering interface %s\n",
interface->dev.bus_id);
usb_remove_sysfs_intf_files(interface);
- device_del (&interface->dev);
+ device_del(&interface->dev);
}
/* Now that the interfaces are unbound, nobody should
* try to access them.
*/
for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
- put_device (&dev->actconfig->interface[i]->dev);
+ put_device(&dev->actconfig->interface[i]->dev);
dev->actconfig->interface[i] = NULL;
}
dev->actconfig = NULL;
}
}
-
-/*
+/**
* usb_enable_endpoint - Enable an endpoint for USB communications
* @dev: the device whose interface is being enabled
* @ep: the endpoint
ep->enabled = 1;
}
-/*
+/**
* usb_enable_interface - Enable all the endpoints for an interface
* @dev: the device whose interface is being enabled
* @intf: pointer to the interface descriptor
struct usb_host_interface *alt;
int ret;
int manual = 0;
+ unsigned int epaddr;
+ unsigned int pipe;
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; i++) {
- unsigned int epaddr =
- alt->endpoint[i].desc.bEndpointAddress;
- unsigned int pipe =
- __create_pipe(dev, USB_ENDPOINT_NUMBER_MASK & epaddr)
- | (usb_endpoint_out(epaddr) ? USB_DIR_OUT : USB_DIR_IN);
+ epaddr = alt->endpoint[i].desc.bEndpointAddress;
+ pipe = __create_pipe(dev,
+ USB_ENDPOINT_NUMBER_MASK & epaddr) |
+ (usb_endpoint_out(epaddr) ?
+ USB_DIR_OUT : USB_DIR_IN);
usb_clear_halt(dev, pipe);
}
return -ENOMEM;
if (add_uevent_var(env,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+ "MODALIAS=usb:"
+ "v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct),
le16_to_cpu(usb_dev->descriptor.bcdDevice),
};
static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
- struct usb_host_config *config,
- u8 inum)
+ struct usb_host_config *config,
+ u8 inum)
{
struct usb_interface_assoc_descriptor *retval = NULL;
struct usb_interface_assoc_descriptor *intf_assoc;
return retval;
}
-
/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
* getting rid of old interfaces means unbinding their drivers.
*/
if (dev->state != USB_STATE_ADDRESS)
- usb_disable_device (dev, 1); // Skip ep0
-
- if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) {
+ usb_disable_device(dev, 1); /* Skip ep0 */
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0) {
/* All the old state is gone, so what else can we do?
* The device is probably useless now anyway.
*/
intf->dev.bus = &usb_bus_type;
intf->dev.type = &usb_if_device_type;
intf->dev.dma_mask = dev->dev.dma_mask;
- device_initialize (&intf->dev);
+ device_initialize(&intf->dev);
mark_quiesced(intf);
- sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
- dev->bus->busnum, dev->devpath,
- configuration, alt->desc.bInterfaceNumber);
+ sprintf(&intf->dev.bus_id[0], "%d-%s:%d.%d",
+ dev->bus->busnum, dev->devpath,
+ configuration, alt->desc.bInterfaceNumber);
}
kfree(new_interfaces);
for (i = 0; i < nintf; ++i) {
struct usb_interface *intf = cp->interface[i];
- dev_dbg (&dev->dev,
+ dev_dbg(&dev->dev,
"adding %s (config #%d, interface %d)\n",
intf->dev.bus_id, configuration,
intf->cur_altsetting->desc.bInterfaceNumber);
- ret = device_add (&intf->dev);
+ ret = device_add(&intf->dev);
if (ret != 0) {
dev_err(&dev->dev, "device_add(%s) --> %d\n",
intf->dev.bus_id, ret);
projects / linux-2.6-omap-h63xx.git / commitdiff