]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
ide-tape: remove struct idetape_parameter_block_descriptor_t
authorBorislav Petkov <bbpetkov@yahoo.de>
Sat, 2 Feb 2008 18:56:50 +0000 (19:56 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 2 Feb 2008 18:56:50 +0000 (19:56 +0100)
Also, shorten function name idetape_get_blocksize_from_block_descriptor() and
move its definition up thereby getting rid of its forward declaration.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-tape.c

index 32f56eeb1efcd7600a990de85d7761a7cf190f01..2a4a652e30834b1f25c909667da715dcdd0b3973 100644 (file)
@@ -677,18 +677,6 @@ typedef struct {
 #define IDETAPE_BLOCK_SIZE_PAGE                0x30
 #define IDETAPE_BUFFER_FILLING_PAGE    0x33
 
-/*
- *     Mode Parameter Block Descriptor the MODE SENSE packet command
- *
- *     Support for block descriptors is optional.
- */
-typedef struct {
-       __u8            density_code;           /* Medium density code */
-       __u8            blocks[3];              /* Number of blocks */
-       __u8            reserved4;              /* Reserved */
-       __u8            length[3];              /* Block Length */
-} idetape_parameter_block_descriptor_t;
-
 /*
  *     Run time configurable parameters.
  */
@@ -3503,7 +3491,30 @@ static int idetape_chrdev_ioctl (struct inode *inode, struct file *file, unsigne
        }
 }
 
-static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive);
+/*
+ * Do a mode sense page 0 with block descriptor and if it succeeds set the tape
+ * block size with the reported value.
+ */
+static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
+{
+       idetape_tape_t *tape = drive->driver_data;
+       idetape_pc_t pc;
+
+       idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
+       if (idetape_queue_pc_tail(drive, &pc)) {
+               printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
+               if (tape->tape_block_size == 0) {
+                       printk(KERN_WARNING "ide-tape: Cannot deal with zero "
+                                           "block size, assuming 32k\n");
+                       tape->tape_block_size = 32768;
+               }
+               return;
+       }
+       tape->tape_block_size = (pc.buffer[4 + 5] << 16) +
+                               (pc.buffer[4 + 6] << 8)  +
+                                pc.buffer[4 + 7];
+       tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
+}
 
 /*
  *     Our character device open function.
@@ -3557,7 +3568,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
                clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
 
        /* Read block size and write protect status from drive. */
-       idetape_get_blocksize_from_block_descriptor(drive);
+       ide_tape_get_bsize_from_bdesc(drive);
 
        /* Set write protect flag if device is opened as read-only. */
        if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
@@ -3771,31 +3782,6 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive)
                tape->tape_block_size = 1024;
 }
 
-/*
- *     ide_get_blocksize_from_block_descriptor does a mode sense page 0 with block descriptor
- *     and if it succeeds sets the tape block size with the reported value
- */
-static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive)
-{
-
-       idetape_tape_t *tape = drive->driver_data;
-       idetape_pc_t pc;
-       idetape_parameter_block_descriptor_t *block_descrp;
-
-       idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
-       if (idetape_queue_pc_tail(drive, &pc)) {
-               printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
-               if (tape->tape_block_size == 0) {
-                       printk(KERN_WARNING "ide-tape: Cannot deal with zero block size, assume 32k\n");
-                       tape->tape_block_size =  32768;
-               }
-               return;
-       }
-       block_descrp = (idetape_parameter_block_descriptor_t *)(pc.buffer + 4);
-       tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2];
-       tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
-}
-
 #ifdef CONFIG_IDE_PROC_FS
 static void idetape_add_settings (ide_drive_t *drive)
 {
@@ -3872,7 +3858,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
        
        idetape_get_inquiry_results(drive);
        idetape_get_mode_sense_results(drive);
-       idetape_get_blocksize_from_block_descriptor(drive);
+       ide_tape_get_bsize_from_bdesc(drive);
        tape->user_bs_factor = 1;
        tape->stage_size = *ctl * tape->tape_block_size;
        while (tape->stage_size > 0xffff) {