bool "Heartbeat LED"
depends on SH_MPC1211 || SH_SH03 || \
SH_BIGSUR || SOLUTION_ENGINE || \
- SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK
+ SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \
+ SH_R7780RP
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
#
-obj-y := setup.o rtc.o led.o
+obj-y := setup.o rtc.o
obj-$(CONFIG_PCI) += pci.o
+++ /dev/null
-/*
- * linux/arch/sh/boards/mpc1211/led.c
- *
- * Copyright (C) 2001 Saito.K & Jeanne
- *
- * This file contains Interface MPC-1211 specific LED code.
- */
-
-
-static void mach_led(int position, int value)
-{
- volatile unsigned char* p = (volatile unsigned char*)0xa2000000;
-
- if (value) {
- *p |= 1;
- } else {
- *p &= ~1;
- }
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_mpc1211(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned char* p = (volatile unsigned char*)0xa2000000;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ( (300<<FSHIFT)/
- ((avenrun[0]/5) + (3<<FSHIFT)) );
-
- if (up) {
- if (bit == 7) {
- bit--;
- up=0;
- } else {
- bit ++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up=1;
- } else {
- bit--;
- }
- }
- *p = 1<<bit;
-
-}
-#endif /* CONFIG_HEARTBEAT */
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mpc1211/mpc1211.h>
return 0;
}
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = 0xa2000000,
+ .end = 0xa2000000 + 8 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *mpc1211_devices[] __initdata = {
+ &heartbeat_device,
+};
+
+static int __init mpc1211_devices_setup(void)
+{
+ return platform_add_devices(mpc1211_devices,
+ ARRAY_SIZE(mpc1211_devices));
+}
+__initcall(mpc1211_devices_setup);
+
/* arch/sh/boards/mpc1211/rtc.c */
void mpc1211_time_init(void);
.mv_nr_irqs = 48,
.mv_irq_demux = mpc1211_irq_demux,
.mv_init_irq = init_mpc1211_IRQ,
-
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_mpc1211,
-#endif
};
ALIAS_MV(mpc1211)
obj-y := setup.o io.o irq.o
-obj-$(CONFIG_HEARTBEAT) += led.o
obj-$(CONFIG_PUSH_SWITCH) += psw.o
+++ /dev/null
-/*
- * Copyright (C) Atom Create Engineering Co., Ltd.
- *
- * May be copied or modified under the terms of GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code.
- */
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/r7780rp/r7780rp.h>
-
-/* Cycle the LED's in the clasic Knightriger/Sun pattern */
-void heartbeat_r7780rp(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short *p = (volatile unsigned short *)PA_OBLED;
- static unsigned bit = 0, up = 1;
- unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7};
-
- cnt += 1;
- if (cnt < period)
- return;
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
- */
- period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
-
- *p = 1 << bit_pos[bit];
- if (up)
- if (bit == 7) {
- bit--;
- up = 0;
- } else
- bit++;
- else if (bit == 0)
- up = 1;
- else
- bit--;
-}
#include <asm/clock.h>
#include <asm/io.h>
-extern void heartbeat_r7780rp(void);
extern void init_r7780rp_IRQ(void);
static struct resource m66596_usb_host_resources[] = {
.resource = cf_ide_resources,
};
+static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_OBLED,
+ .end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = heartbeat_bit_pos,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
static struct platform_device *r7780rp_devices[] __initdata = {
&m66596_usb_host_device,
&cf_ide_device,
+ &heartbeat_device,
};
static int __init r7780rp_devices_setup(void)
.mv_ioport_map = r7780rp_ioport_map,
.mv_init_irq = init_r7780rp_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_r7780rp,
-#endif
};
ALIAS_MV(r7780rp)
#
obj-y := setup.o io.o irq.o
-obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * linux/arch/sh/boards/renesas/rts7751r2d/led.c
- *
- * Copyright (C) Atom Create Engineering Co., Ltd.
- *
- * May be copied or modified under the terms of GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Renesas Technology Sales RTS7751R2D specific LED code.
- */
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <asm/rts7751r2d.h>
-
-/* Cycle the LED's in the clasic Knightriger/Sun pattern */
-void heartbeat_rts7751r2d(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short *p = (volatile unsigned short *)PA_OUTPORT;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period)
- return;
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
- */
- period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
-
- *p = 1 << bit;
- if (up)
- if (bit == 7) {
- bit--;
- up = 0;
- } else
- bit++;
- else if (bit == 0)
- up = 1;
- else
- bit--;
-}
},
};
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_OUTPORT,
+ .end = PA_OUTPORT + 8 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
static struct platform_device *rts7751r2d_devices[] __initdata = {
&uart_device,
+ &heartbeat_device,
};
static int __init rts7751r2d_devices_setup(void)
.mv_outsl = rts7751r2d_outsl,
.mv_init_irq = init_rts7751r2d_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_rts7751r2d,
-#endif
.mv_irq_demux = rts7751r2d_irq_demux,
#ifdef CONFIG_USB_SM501
#
obj-y := setup.o io.o irq.o
-obj-$(CONFIG_HEARTBEAT) += led.o
-
+++ /dev/null
-/*
- * linux/arch/sh/kernel/led_se.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/config.h>
-#include <asm/se7206.h>
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ( (300<<FSHIFT)/
- ((avenrun[0]/5) + (3<<FSHIFT)) );
-
- if (up) {
- if (bit == 7) {
- bit--;
- up=0;
- } else {
- bit ++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up=1;
- } else {
- bit--;
- }
- }
- *p = 1<<(bit+8);
-
-}
-#endif /* CONFIG_HEARTBEAT */
* linux/arch/sh/boards/se/7206/setup.c
*
* Copyright (C) 2006 Yoshinori Sato
+ * Copyright (C) 2007 Paul Mundt
*
* Hitachi 7206 SolutionEngine Support.
*
.resource = smc91x_resources,
};
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = heartbeat_bit_pos,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+ &smc91x_device,
+ &heartbeat_device,
+};
+
static int __init se7206_devices_setup(void)
{
- return platform_device_register(&smc91x_device);
+ return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
}
-
__initcall(se7206_devices_setup);
-void heartbeat_se(void);
-
/*
* The Machine Vector
*/
.mv_outsl = se7206_outsl,
.mv_init_irq = init_se7206_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_se,
-#endif
};
ALIAS_MV(se)
#
obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * linux/arch/sh/boards/se/7300/led.c
- *
- * Derived from linux/arch/sh/boards/se/770x/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/sched.h>
-#include <asm/se7300.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_7300se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
-
- if (up) {
- if (bit == 7) {
- bit--;
- up = 0;
- } else {
- bit++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up = 1;
- } else {
- bit--;
- }
- }
- *p = 1 << (bit + 8);
-
-}
-
* SH-Mobile SolutionEngine 7300 Support.
*
*/
-
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se7300.h>
-void heartbeat_7300se(void);
void init_7300se_IRQ(void);
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = heartbeat_bit_pos,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *se7300_devices[] __initdata = {
+ &heartbeat_device,
+};
+
+static int __init se7300_devices_setup(void)
+{
+ return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices));
+}
+__initcall(se7300_devices_setup);
+
/*
* The Machine Vector
*/
.mv_outsl = sh7300se_outsl,
.mv_init_irq = init_7300se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_7300se,
-#endif
};
ALIAS_MV(7300se)
#
obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * arch/sh/boards/se/73180/led.c
- *
- * Derived from arch/sh/boards/se/770x/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/sched.h>
-#include <asm/mach/se73180.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_73180se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
-
- if (up) {
- if (bit == 7) {
- bit--;
- up = 0;
- } else {
- bit++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up = 1;
- } else {
- bit--;
- }
- }
- *p = 1 << (bit + LED_SHIFT);
-
-}
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se73180.h>
#include <asm/irq.h>
-void heartbeat_73180se(void);
void init_73180se_IRQ(void);
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + 8 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *se73180_devices[] __initdata = {
+ &heartbeat_device,
+};
+
+static int __init se73180_devices_setup(void)
+{
+ return platform_add_devices(sh7343se_platform_devices,
+ ARRAY_SIZE(sh7343se_platform_devices));
+}
+__initcall(se73180_devices_setup);
+
/*
* The Machine Vector
*/
.mv_init_irq = init_73180se_IRQ,
.mv_irq_demux = shmse_irq_demux,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_73180se,
-#endif
};
ALIAS_MV(73180se)
#
obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * arch/sh/boards/se/7343/led.c
- *
- */
-#include <linux/sched.h>
-#include <asm/mach/se7343.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_7343se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
-
- if (up) {
- if (bit == 7) {
- bit--;
- up = 0;
- } else {
- bit++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up = 1;
- } else {
- bit--;
- }
- }
- *p = 1 << (bit + LED_SHIFT);
-
-}
#include <asm/mach/se7343.h>
#include <asm/irq.h>
-void heartbeat_7343se(void);
void init_7343se_IRQ(void);
static struct resource smc91x_resources[] = {
.resource = smc91x_resources,
};
-static struct platform_device *smc91x_platform_devices[] __initdata = {
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + 8 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
&smc91x_device,
+ &heartbeat_device,
};
static int __init sh7343se_devices_setup(void)
{
- return platform_add_devices(smc91x_platform_devices,
- ARRAY_SIZE(smc91x_platform_devices));
+ return platform_add_devices(sh7343se_platform_devices,
+ ARRAY_SIZE(sh7343se_platform_devices));
}
static void __init sh7343se_setup(char **cmdline_p)
.mv_init_irq = init_7343se_IRQ,
.mv_irq_demux = shmse_irq_demux,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_7343se,
-#endif
};
ALIAS_MV(7343se)
#
obj-y := setup.o io.o irq.o
-obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * linux/arch/sh/boards/se/770x/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/sched.h>
-#include <asm/se.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ( (300<<FSHIFT)/
- ((avenrun[0]/5) + (3<<FSHIFT)) );
-
- if (up) {
- if (bit == 7) {
- bit--;
- up=0;
- } else {
- bit ++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up=1;
- } else {
- bit--;
- }
- }
- *p = 1<<(bit+8);
-
-}
*
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se.h>
#include <asm/io.h>
#include <asm/smc37c93x.h>
-void heartbeat_se(void);
void init_se_IRQ(void);
/*
outb_p(CONFIG_EXIT, CONFIG_PORT);
}
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = heartbeat_bit_pos,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *se_devices[] __initdata = {
+ &heartbeat_device,
+};
+
+static int __init se_devices_setup(void)
+{
+ return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+__initcall(se_devices_setup);
+
/*
* The Machine Vector
*/
.mv_outsl = se_outsl,
.mv_init_irq = init_se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_se,
-#endif
};
ALIAS_MV(se)
obj-y := setup.o io.o irq.o
obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * linux/arch/sh/boards/se/7751/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-#include <linux/sched.h>
-#include <asm/se7751.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_7751se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ( (300<<FSHIFT)/
- ((avenrun[0]/5) + (3<<FSHIFT)) );
-
- if (up) {
- if (bit == 7) {
- bit--;
- up=0;
- } else {
- bit ++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up=1;
- } else {
- bit--;
- }
- }
- *p = 1<<(bit+8);
-
-}
* Ian da Silva and Jeremy Siegel, 2001.
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se7751.h>
#include <asm/io.h>
-void heartbeat_7751se(void);
void init_7751se_IRQ(void);
#ifdef CONFIG_SH_KGDB
}
#endif /* CONFIG_SH_KGDB */
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = heartbeat_bit_pos,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+ &smc91x_device,
+ &heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+ return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+__initcall(se7751_devices_setup);
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_7751se __initmv = {
.mv_name = "7751 SolutionEngine",
.mv_setup = sh7751se_setup,
.mv_outsl = sh7751se_outsl,
.mv_init_irq = init_7751se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_7751se,
-#endif
};
ALIAS_MV(7751se)
#
obj-y := setup.o rtc.o
-obj-$(CONFIG_HEARTBEAT) += led.o
+++ /dev/null
-/*
- * linux/arch/sh/boards/sh03/led.c
- *
- * Copyright (C) 2004 Saito.K Interface Corporation.
- *
- * This file contains Interface CTP/PCI-SH03 specific LED code.
- */
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_sh03(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned char* p = (volatile unsigned char*)0xa0800000;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ( (300<<FSHIFT)/
- ((avenrun[0]/5) + (3<<FSHIFT)) );
-
- if (up) {
- if (bit == 7) {
- bit--;
- up=0;
- } else {
- bit ++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up=1;
- } else {
- bit--;
- }
- }
- *p = 1<<bit;
-
-}
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/rtc.h>
#include <asm/sh03/io.h>
board_time_init = sh03_time_init;
}
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = 0xa0800000,
+ .end = 0xa0800000 + 8 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+ &heartbeat_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+ return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+__initcall(sh03_devices_setup);
+
struct sh_machine_vector mv_sh03 __initmv = {
.mv_name = "Interface (CTP/PCI-SH03)",
.mv_setup = sh03_setup,
.mv_nr_irqs = 48,
.mv_ioport_map = sh03_ioport_map,
.mv_init_irq = init_sh03_IRQ,
-
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_sh03,
-#endif
};
ALIAS_MV(sh03)
obj-$(CONFIG_SH_DMA) += dma/
obj-$(CONFIG_SUPERHYWAY) += superhyway/
obj-$(CONFIG_PUSH_SWITCH) += push-switch.o
+obj-$(CONFIG_HEARTBEAT) += heartbeat.o
projects / linux-2.6-omap-h63xx.git / commitdiff