]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
ath9k: Cleanup get_rate() interface
authorSujith <Sujith.Manoharan@atheros.com>
Fri, 30 Jan 2009 08:59:15 +0000 (14:29 +0530)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 9 Feb 2009 20:03:44 +0000 (15:03 -0500)
The interface to calculate the TX rate for a data frame
was convoluted with lots of redundant arguments being
passed around. Remove all of that and make it simple.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath9k/rc.c

index 61c86c4f9fc4f57268494915e8aa25c0683b2da1..8bc7bb50c7fc6aba8f21aad54aa7fa79180fa76d 100644 (file)
@@ -631,8 +631,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
 static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
                             struct ath_rate_priv *ath_rc_priv,
                             struct ath_rate_table *rate_table,
-                            int probe_allowed, int *is_probing,
-                            int is_retry)
+                            int *is_probing)
 {
        u32 dt, best_thruput, this_thruput, now_msec;
        u8 rate, next_rate, best_rate, maxindex, minindex;
@@ -714,13 +713,6 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
        }
 
        rate = best_rate;
-
-       /* if we are retrying for more than half the number
-        * of max retries, use the min rate for the next retry
-        */
-       if (is_retry)
-               rate = ath_rc_priv->valid_rate_index[minindex];
-
        ath_rc_priv->rssi_last_lookup = rssi_last;
 
        /*
@@ -728,13 +720,12 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
         * non-monoticity of 11g's rate table
         */
 
-       if (rate >= ath_rc_priv->rate_max_phy && probe_allowed) {
+       if (rate >= ath_rc_priv->rate_max_phy) {
                rate = ath_rc_priv->rate_max_phy;
 
                /* Probe the next allowed phy state */
-               /* FIXME:XXXX Check to make sure ratMax is checked properly */
                if (ath_rc_get_nextvalid_txrate(rate_table,
-                                               ath_rc_priv, rate, &next_rate) &&
+                                       ath_rc_priv, rate, &next_rate) &&
                    (now_msec - ath_rc_priv->probe_time >
                     rate_table->probe_interval) &&
                    (ath_rc_priv->hw_maxretry_pktcnt >= 1)) {
@@ -804,54 +795,54 @@ static u8 ath_rc_rate_getidx(struct ath_softc *sc,
 
 static void ath_rc_ratefind(struct ath_softc *sc,
                            struct ath_rate_priv *ath_rc_priv,
-                           int num_tries, int num_rates,
-                           struct ieee80211_tx_info *tx_info, int *is_probe,
-                           int is_retry)
+                           struct ieee80211_tx_rate_control *txrc)
 {
-       u8 try_per_rate = 0, i = 0, rix, nrix;
        struct ath_rate_table *rate_table;
+       struct sk_buff *skb = txrc->skb;
+       struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
        struct ieee80211_tx_rate *rates = tx_info->control.rates;
+       u8 try_per_rate = 0, i = 0, rix, nrix;
+       int is_probe = 0;
 
        rate_table = sc->cur_rate_table;
-       rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, 1,
-                                is_probe, is_retry);
+       rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, &is_probe);
        nrix = rix;
 
-       if (*is_probe) {
+       if (is_probe) {
                /* set one try for probe rates. For the
                 * probes don't enable rts */
-               ath_rc_rate_set_series(rate_table,
-                       &rates[i++], 1, nrix, 0);
+               ath_rc_rate_set_series(rate_table, &rates[i++],
+                                      1, nrix, 0);
 
-               try_per_rate = (num_tries/num_rates);
+               try_per_rate = (ATH_11N_TXMAXTRY/4);
                /* Get the next tried/allowed rate. No RTS for the next series
                 * after the probe rate
                 */
-               nrix = ath_rc_rate_getidx(sc,
-                       ath_rc_priv, rate_table, nrix, 1, 0);
-               ath_rc_rate_set_series(rate_table,
-                       &rates[i++], try_per_rate, nrix, 0);
+               nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
+                                         rate_table, nrix, 1, 0);
+               ath_rc_rate_set_series(rate_table, &rates[i++],
+                                      try_per_rate, nrix, 0);
        } else {
-               try_per_rate = (num_tries/num_rates);
+               try_per_rate = (ATH_11N_TXMAXTRY/4);
                /* Set the choosen rate. No RTS for first series entry. */
-               ath_rc_rate_set_series(rate_table,
-                       &rates[i++], try_per_rate, nrix, 0);
+               ath_rc_rate_set_series(rate_table, &rates[i++],
+                                      try_per_rate, nrix, 0);
        }
 
        /* Fill in the other rates for multirate retry */
-       for ( ; i < num_rates; i++) {
+       for ( ; i < 4; i++) {
                u8 try_num;
                u8 min_rate;
 
-               try_num = ((i + 1) == num_rates) ?
-                       num_tries - (try_per_rate * i) : try_per_rate ;
-               min_rate = (((i + 1) == num_rates) && 0);
+               try_num = ((i + 1) == 4) ?
+                       ATH_11N_TXMAXTRY - (try_per_rate * i) : try_per_rate ;
+               min_rate = (((i + 1) == 4) && 0);
 
                nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
                                          rate_table, nrix, 1, min_rate);
                /* All other rates in the series have RTS enabled */
-               ath_rc_rate_set_series(rate_table,
-                                      &rates[i], try_num, nrix, 1);
+               ath_rc_rate_set_series(rate_table, &rates[i],
+                                      try_num, nrix, 1);
        }
 
        /*
@@ -1503,10 +1494,9 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
        struct ieee80211_supported_band *sband = txrc->sband;
        struct sk_buff *skb = txrc->skb;
        struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+       struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
        struct ath_softc *sc = priv;
        struct ath_rate_priv *ath_rc_priv = priv_sta;
-       struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-       int is_probe = 0;
        __le16 fc = hdr->frame_control;
 
        /* lowest rate for management and multicast/broadcast frames */
@@ -1519,8 +1509,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
        }
 
        /* Find tx rate for unicast frames */
-       ath_rc_ratefind(sc, ath_rc_priv, ATH_11N_TXMAXTRY, 4,
-                       tx_info, &is_probe, false);
+       ath_rc_ratefind(sc, ath_rc_priv, txrc);
 }
 
 static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,