return 0;
}
+void mpic_set_vector(unsigned int virq, unsigned int vector)
+{
+ struct mpic *mpic = mpic_from_irq(virq);
+ unsigned int src = mpic_irq_to_hw(virq);
+ unsigned int vecpri;
+
+ DBG("mpic: set_vector(mpic:@%p,virq:%d,src:%d,vector:0x%x)\n",
+ mpic, virq, src, vector);
+
+ if (src >= mpic->irq_count)
+ return;
+
+ vecpri = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
+ vecpri = vecpri & ~MPIC_INFO(VECPRI_VECTOR_MASK);
+ vecpri |= vector;
+ mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
+}
+
static struct irq_chip mpic_irq_chip = {
.mask = mpic_mask_irq,
.unmask = mpic_unmask_irq,
mpic_u3msi_init(mpic);
}
+ mpic_pasemi_msi_init(mpic);
+
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
u32 vecpri = MPIC_VECPRI_MASK | i |
--- /dev/null
+/*
+ * Copyright 2007, Olof Johansson, PA Semi
+ *
+ * Based on arch/powerpc/sysdev/mpic_u3msi.c:
+ *
+ * Copyright 2006, Segher Boessenkool, IBM Corporation.
+ * Copyright 2006-2007, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/msi.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+
+#include "mpic.h"
+
+/* Allocate 16 interrupts per device, to give an alignment of 16,
+ * since that's the size of the grouping w.r.t. affinity. If someone
+ * needs more than 32 MSI's down the road we'll have to rethink this,
+ * but it should be OK for now.
+ */
+#define ALLOC_CHUNK 16
+
+#define PASEMI_MSI_ADDR 0xfc080000
+
+/* A bit ugly, can we get this from the pci_dev somehow? */
+static struct mpic *msi_mpic;
+
+
+static void mpic_pasemi_msi_mask_irq(unsigned int irq)
+{
+ pr_debug("mpic_pasemi_msi_mask_irq %d\n", irq);
+ mask_msi_irq(irq);
+ mpic_mask_irq(irq);
+}
+
+static void mpic_pasemi_msi_unmask_irq(unsigned int irq)
+{
+ pr_debug("mpic_pasemi_msi_unmask_irq %d\n", irq);
+ mpic_unmask_irq(irq);
+ unmask_msi_irq(irq);
+}
+
+static struct irq_chip mpic_pasemi_msi_chip = {
+ .shutdown = mpic_pasemi_msi_mask_irq,
+ .mask = mpic_pasemi_msi_mask_irq,
+ .unmask = mpic_pasemi_msi_unmask_irq,
+ .eoi = mpic_end_irq,
+ .set_type = mpic_set_irq_type,
+ .set_affinity = mpic_set_affinity,
+ .typename = "PASEMI-MSI ",
+};
+
+static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+ if (type == PCI_CAP_ID_MSIX)
+ pr_debug("pasemi_msi: MSI-X untested, trying anyway\n");
+
+ return 0;
+}
+
+static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
+{
+ struct msi_desc *entry;
+
+ pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev);
+
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ if (entry->irq == NO_IRQ)
+ continue;
+
+ set_irq_msi(entry->irq, NULL);
+ mpic_msi_free_hwirqs(msi_mpic, virq_to_hw(entry->irq),
+ ALLOC_CHUNK);
+ irq_dispose_mapping(entry->irq);
+ }
+
+ return;
+}
+
+static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+ irq_hw_number_t hwirq;
+ unsigned int virq;
+ struct msi_desc *entry;
+ struct msi_msg msg;
+ u64 addr;
+
+ pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
+ pdev, nvec, type);
+
+ msg.address_hi = 0;
+ msg.address_lo = PASEMI_MSI_ADDR;
+
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ /* Allocate 16 interrupts for now, since that's the grouping for
+ * affinity. This can be changed later if it turns out 32 is too
+ * few MSIs for someone, but restrictions will apply to how the
+ * sources can be changed independently.
+ */
+ hwirq = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
+ if (hwirq < 0) {
+ pr_debug("pasemi_msi: failed allocating hwirq\n");
+ return hwirq;
+ }
+
+ virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
+ if (virq == NO_IRQ) {
+ pr_debug("pasemi_msi: failed mapping hwirq 0x%lx\n", hwirq);
+ mpic_msi_free_hwirqs(msi_mpic, hwirq, ALLOC_CHUNK);
+ return -ENOSPC;
+ }
+
+ /* Vector on MSI is really an offset, the hardware adds
+ * it to the value written at the magic address. So set
+ * it to 0 to remain sane.
+ */
+ mpic_set_vector(virq, 0);
+
+ set_irq_msi(virq, entry);
+ set_irq_chip(virq, &mpic_pasemi_msi_chip);
+ set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
+
+ pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%lx) addr 0x%lx\n",
+ virq, hwirq, addr);
+
+ /* Likewise, the device writes [0...511] into the target
+ * register to generate MSI [512...1023]
+ */
+ msg.data = hwirq-0x200;
+ write_msi_msg(virq, &msg);
+ }
+
+ return 0;
+}
+
+int mpic_pasemi_msi_init(struct mpic *mpic)
+{
+ int rc;
+
+ if (!mpic->irqhost->of_node ||
+ !of_device_is_compatible(mpic->irqhost->of_node,
+ "pasemi,pwrficient-openpic"))
+ return -ENODEV;
+
+ rc = mpic_msi_init_allocator(mpic);
+ if (rc) {
+ pr_debug("pasemi_msi: Error allocating bitmap!\n");
+ return rc;
+ }
+
+ pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n");
+
+ msi_mpic = mpic;
+ WARN_ON(ppc_md.setup_msi_irqs);
+ ppc_md.setup_msi_irqs = pasemi_msi_setup_msi_irqs;
+ ppc_md.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs;
+ ppc_md.msi_check_device = pasemi_msi_check_device;
+
+ return 0;
+}
projects / linux-2.6-omap-h63xx.git / commitdiff