sbirq - IRQ # for CMI8330 chip (SB16)
sbdma8 - 8bit DMA # for CMI8330 chip (SB16)
sbdma16 - 16bit DMA # for CMI8330 chip (SB16)
+ fmport - (optional) OPL3 I/O port
+ mpuport - (optional) MPU401 I/O port
+ mpuirq - (optional) MPU401 irq #
This module supports multiple cards and autoprobe.
Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
port - port # for ES-1688 chip (0x220,0x240,0x260)
+ fm_port - port # for OPL3 (option; share the same port as default)
mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
irq - IRQ # for ES-1688 chip (5,7,9,10)
mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
extern int snd_ad1816a_pcm(struct snd_ad1816a *chip, int device, struct snd_pcm **rpcm);
extern int snd_ad1816a_mixer(struct snd_ad1816a *chip);
+extern int snd_ad1816a_timer(struct snd_ad1816a *chip, int device,
+ struct snd_timer **rtimer);
#endif /* __SOUND_AD1816A_H */
#define SB_ALS4000_3D_AUTO_MUTE 0x52
#define SB_ALS4000_ANALOG_BLOCK_CTRL 0x53
#define SB_ALS4000_3D_DELAYLINE_PATTERN 0x54
+#define SB_ALS4000_CR3_CONFIGURATION 0xc3 /* bit 7 is Digital Loop Enable */
#define SB_ALS4000_QSOUND 0xdb
/* IRQ setting bitmap */
SB_MIX_DOUBLE,
SB_MIX_INPUT_SW,
SB_MIX_CAPTURE_PRO,
- SB_MIX_CAPTURE_DT019X
+ SB_MIX_CAPTURE_DT019X,
+ SB_MIX_MONO_CAPTURE_ALS4K
};
#define SB_MIXVAL_DOUBLE(left_reg, right_reg, left_shift, right_shift, mask) \
tristate "C-Media CMI8330"
select SND_WSS_LIB
select SND_SB16_DSP
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
help
Say Y here to include support for soundcards based on the
C-Media CMI8330 chip.
struct snd_card_ad1816a *acard;
struct snd_ad1816a *chip;
struct snd_opl3 *opl3;
+ struct snd_timer *timer;
if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE,
sizeof(struct snd_card_ad1816a))) == NULL)
return error;
}
+ error = snd_ad1816a_timer(chip, 0, &timer);
+ if (error < 0) {
+ snd_card_free(card);
+ return error;
+ }
+
if (mpu_port[dev] > 0) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
mpu_port[dev], 0, mpu_irq[dev], IRQF_DISABLED,
OPL3_HW_AUTO, 0, &opl3) < 0) {
printk(KERN_ERR PFX "no OPL device at 0x%lx-0x%lx.\n", fm_port[dev], fm_port[dev] + 2);
} else {
- if ((error = snd_opl3_timer_new(opl3, 1, 2)) < 0) {
- snd_card_free(card);
- return error;
- }
- if ((error = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
+ error = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+ if (error < 0) {
snd_card_free(card);
return error;
}
if (inb(AD1816A_REG(AD1816A_CHIP_STATUS)) & AD1816A_READY)
return 0;
- snd_printk("chip busy.\n");
+ snd_printk(KERN_WARNING "chip busy.\n");
return -EBUSY;
}
spin_unlock(&chip->lock);
break;
default:
- snd_printk("invalid trigger mode 0x%x.\n", what);
+ snd_printk(KERN_WARNING "invalid trigger mode 0x%x.\n", what);
error = -EINVAL;
}
.fifo_size = 0,
};
-#if 0 /* not used now */
static int snd_ad1816a_timer_close(struct snd_timer *timer)
{
struct snd_ad1816a *chip = snd_timer_chip(timer);
.start = snd_ad1816a_timer_start,
.stop = snd_ad1816a_timer_stop,
};
-#endif /* not used now */
-
static int snd_ad1816a_playback_open(struct snd_pcm_substream *substream)
{
case AD1816A_HW_AD1815: return "AD1815";
case AD1816A_HW_AD18MAX10: return "AD18max10";
default:
- snd_printk("Unknown chip version %d:%d.\n",
+ snd_printk(KERN_WARNING "Unknown chip version %d:%d.\n",
chip->version, chip->hardware);
return "AD1816A - unknown";
}
return 0;
}
-#if 0 /* not used now */
int __devinit snd_ad1816a_timer(struct snd_ad1816a *chip, int device, struct snd_timer **rtimer)
{
struct snd_timer *timer;
*rtimer = timer;
return 0;
}
-#endif /* not used now */
/*
*
* To quickly load the module,
*
* modprobe -a snd-cmi8330 sbport=0x220 sbirq=5 sbdma8=1
- * sbdma16=5 wssport=0x530 wssirq=11 wssdma=0
+ * sbdma16=5 wssport=0x530 wssirq=11 wssdma=0 fmport=0x388
*
* This card has two mixers and two PCM devices. I've cheesed it such
* that recording and playback can be done through the same device.
- * The driver "magically" routes the capturing to the AD1848 codec,
+ * The driver "magically" routes the capturing to the CMI8330 codec,
* and playback to the SB16 codec. This allows for full-duplex mode
* to some extent.
* The utilities in alsa-utils are aware of both devices, so passing
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/wss.h>
+#include <sound/opl3.h>
+#include <sound/mpu401.h>
#include <sound/sb.h>
#include <sound/initval.h>
static long wssport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
static int wssirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
static int wssdma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static long fmport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static long mpuport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard.");
module_param_array(wssdma, int, NULL, 0444);
MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver.");
+module_param_array(fmport, long, NULL, 0444);
+MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver.");
+module_param_array(mpuport, long, NULL, 0444);
+MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver.");
+module_param_array(mpuirq, int, NULL, 0444);
+MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port.");
#ifdef CONFIG_PNP
static int isa_registered;
static int pnp_registered;
#ifdef CONFIG_PNP
struct pnp_dev *cap;
struct pnp_dev *play;
+ struct pnp_dev *mpu;
#endif
struct snd_card *card;
struct snd_wss *wss;
#ifdef CONFIG_PNP
static struct pnp_card_device_id snd_cmi8330_pnpids[] = {
- { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" } } },
+ { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } },
{ .id = "" }
};
CMI8330_RMUX3D, 5, 1, 1),
WSS_SINGLE("PC Speaker Playback Volume", 0,
CMI8330_OUTPUTVOL, 3, 3, 0),
-WSS_SINGLE("FM Playback Switch", 0,
- CMI8330_RECMUX, 3, 1, 1),
+WSS_DOUBLE("FM Playback Switch", 0,
+ CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
+WSS_DOUBLE("FM Playback Volume", 0,
+ CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1),
WSS_SINGLE(SNDRV_CTL_NAME_IEC958("Input ", CAPTURE, SWITCH), 0,
CMI8330_RMUX3D, 7, 1, 1),
WSS_SINGLE(SNDRV_CTL_NAME_IEC958("Input ", PLAYBACK, SWITCH), 0,
if (acard->play == NULL)
return -EBUSY;
+ acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL);
+ if (acard->play == NULL)
+ return -EBUSY;
+
pdev = acard->cap;
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n");
+ snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
return -EBUSY;
}
wssport[dev] = pnp_port_start(pdev, 0);
wssdma[dev] = pnp_dma(pdev, 0);
wssirq[dev] = pnp_irq(pdev, 0);
+ fmport[dev] = pnp_port_start(pdev, 1);
/* allocate SB16 resources */
pdev = acard->play;
sbdma16[dev] = pnp_dma(pdev, 1);
sbirq[dev] = pnp_irq(pdev, 0);
+ /* allocate MPU-401 resources */
+ pdev = acard->mpu;
+
+ err = pnp_activate_dev(pdev);
+ if (err < 0) {
+ snd_printk(KERN_ERR
+ "CMI8330/C3D (MPU-401) PnP configure failure\n");
+ return -EBUSY;
+ }
+ mpuport[dev] = pnp_port_start(pdev, 0);
+ mpuirq[dev] = pnp_irq(pdev, 0);
return 0;
}
#endif
{
struct snd_cmi8330 *acard;
int i, err;
+ struct snd_opl3 *opl3;
acard = card->private_data;
err = snd_wss_create(card, wssport[dev] + 4, -1,
wssdma[dev], -1,
WSS_HW_DETECT, 0, &acard->wss);
if (err < 0) {
- snd_printk(KERN_ERR PFX "(AD1848) device busy??\n");
+ snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
return err;
}
if (acard->wss->hardware != WSS_HW_CMI8330) {
- snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n");
+ snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
return -ENODEV;
}
snd_printk(KERN_ERR PFX "failed to create pcms\n");
return err;
}
+ if (fmport[dev] != SNDRV_AUTO_PORT) {
+ if (snd_opl3_create(card,
+ fmport[dev], fmport[dev] + 2,
+ OPL3_HW_AUTO, 0, &opl3) < 0) {
+ snd_printk(KERN_ERR PFX
+ "no OPL device at 0x%lx-0x%lx ?\n",
+ fmport[dev], fmport[dev] + 2);
+ } else {
+ err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ if (mpuport[dev] != SNDRV_AUTO_PORT) {
+ if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
+ mpuport[dev], 0, mpuirq[dev],
+ IRQF_DISABLED, NULL) < 0)
+ printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n",
+ mpuport[dev]);
+ }
strcpy(card->driver, "CMI8330/C3D");
strcpy(card->shortname, "C-Media CMI8330/C3D");
if (hardware == WSS_HW_DETECT)
hardware = WSS_HW_DETECT3;
if (cport < 0x100) {
- snd_printk("please, specify control port for CS4236+ chips\n");
+ snd_printk(KERN_ERR "please, specify control port "
+ "for CS4236+ chips\n");
return -ENODEV;
}
err = snd_wss_create(card, port, cport,
return err;
if (!(chip->hardware & WSS_HW_CS4236B_MASK)) {
- snd_printk("CS4236+: MODE3 and extended registers not available, hardware=0x%x\n",chip->hardware);
+ snd_printk(KERN_ERR "CS4236+: MODE3 and extended registers "
+ "not available, hardware=0x%x\n", chip->hardware);
snd_device_free(card, chip);
return -ENODEV;
}
{
int idx;
for (idx = 0; idx < 8; idx++)
- snd_printk("CD%i = 0x%x\n", idx, inb(chip->cport + idx));
+ snd_printk(KERN_DEBUG "CD%i = 0x%x\n",
+ idx, inb(chip->cport + idx));
for (idx = 0; idx < 9; idx++)
- snd_printk("C%i = 0x%x\n", idx, snd_cs4236_ctrl_in(chip, idx));
+ snd_printk(KERN_DEBUG "C%i = 0x%x\n",
+ idx, snd_cs4236_ctrl_in(chip, idx));
}
#endif
ver1 = snd_cs4236_ctrl_in(chip, 1);
ver2 = snd_cs4236_ext_in(chip, CS4236_VERSION);
snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n", cport, ver1, ver2);
if (ver1 != ver2) {
- snd_printk("CS4236+ chip detected, but control port 0x%lx is not valid\n", cport);
+ snd_printk(KERN_ERR "CS4236+ chip detected, but "
+ "control port 0x%lx is not valid\n", cport);
snd_device_free(card, chip);
return -ENODEV;
}
spin_lock_irqsave(&chip->reg_lock, flags);
ucontrol->value.integer.value[0] = chip->image[CS4231_ALT_FEATURE_1] & 0x02 ? 1 : 0;
#if 0
- printk("get valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n",
+ printk(KERN_DEBUG "get valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, "
+ "C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n",
snd_wss_in(chip, CS4231_ALT_FEATURE_1),
snd_cs4236_ctrl_in(chip, 3),
snd_cs4236_ctrl_in(chip, 4),
mutex_unlock(&chip->mce_mutex);
#if 0
- printk("set valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n",
+ printk(KERN_DEBUG "set valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, "
+ "C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n",
snd_wss_in(chip, CS4231_ALT_FEATURE_1),
snd_cs4236_ctrl_in(chip, 3),
snd_cs4236_ctrl_in(chip, 4),
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220,0x240,0x260 */
+static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* Usually 0x388 */
static long mpu_port[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = -1};
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5,7,9,10 */
static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5,7,9,10 */
module_param_array(mpu_port, long, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
module_param_array(irq, int, NULL, 0444);
+module_param_array(fm_port, long, NULL, 0444);
+MODULE_PARM_DESC(fm_port, "FM port # for ES1688 driver.");
MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
module_param_array(mpu_irq, int, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
sprintf(card->longname, "%s at 0x%lx, irq %i, dma %i", pcm->name,
chip->port, chip->irq, chip->dma8);
- if (snd_opl3_create(card, chip->port, chip->port + 2,
- OPL3_HW_OPL3, 0, &opl3) < 0)
- dev_warn(dev, "opl3 not detected at 0x%lx\n", chip->port);
- else {
- error = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
- if (error < 0)
- goto out;
+ if (fm_port[n] == SNDRV_AUTO_PORT)
+ fm_port[n] = port[n]; /* share the same port */
+
+ if (fm_port[n] > 0) {
+ if (snd_opl3_create(card, fm_port[n], fm_port[n] + 2,
+ OPL3_HW_OPL3, 0, &opl3) < 0)
+ dev_warn(dev,
+ "opl3 not detected at 0x%lx\n", fm_port[n]);
+ else {
+ error = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+ if (error < 0)
+ goto out;
+ }
}
if (mpu_irq[n] >= 0 && mpu_irq[n] != SNDRV_AUTO_IRQ &&
return 1;
}
#ifdef CONFIG_SND_DEBUG
- printk("snd_es1688_dsp_command: timeout (0x%x)\n", val);
+ printk(KERN_DEBUG "snd_es1688_dsp_command: timeout (0x%x)\n", val);
#endif
return 0;
}
hw = ES1688_HW_AUTO;
switch (chip->version & 0xfff0) {
case 0x4880:
- snd_printk("[0x%lx] ESS: AudioDrive ES488 detected, but driver is in another place\n", chip->port);
+ snd_printk(KERN_ERR "[0x%lx] ESS: AudioDrive ES488 detected, "
+ "but driver is in another place\n", chip->port);
return -ENODEV;
case 0x6880:
hw = (chip->version & 0x0f) >= 8 ? ES1688_HW_1688 : ES1688_HW_688;
break;
default:
- snd_printk("[0x%lx] ESS: unknown AudioDrive chip with version 0x%x (Jazz16 soundcard?)\n", chip->port, chip->version);
+ snd_printk(KERN_ERR "[0x%lx] ESS: unknown AudioDrive chip "
+ "with version 0x%x (Jazz16 soundcard?)\n",
+ chip->port, chip->version);
return -ENODEV;
}
}
}
#if 0
- snd_printk("mpu cfg = 0x%x\n", cfg);
+ snd_printk(KERN_DEBUG "mpu cfg = 0x%x\n", cfg);
#endif
spin_lock_irqsave(&chip->reg_lock, flags);
snd_es1688_mixer_write(chip, 0x40, cfg);
cfg = 0xf0; /* enable only DMA counter interrupt */
irq_bits = irqs[chip->irq & 0x0f];
if (irq_bits < 0) {
- snd_printk("[0x%lx] ESS: bad IRQ %d for ES1688 chip!!\n", chip->port, chip->irq);
+ snd_printk(KERN_ERR "[0x%lx] ESS: bad IRQ %d "
+ "for ES1688 chip!!\n",
+ chip->port, chip->irq);
#if 0
irq_bits = 0;
cfg = 0x10;
cfg = 0xf0; /* extended mode DMA enable */
dma = chip->dma8;
if (dma > 3 || dma == 2) {
- snd_printk("[0x%lx] ESS: bad DMA channel %d for ES1688 chip!!\n", chip->port, dma);
+ snd_printk(KERN_ERR "[0x%lx] ESS: bad DMA channel %d "
+ "for ES1688 chip!!\n", chip->port, dma);
#if 0
dma_bits = 0;
cfg = 0x00; /* disable all DMA */
return -EINVAL; /* something is wrong */
}
#if 0
- printk("trigger: val = 0x%x, value = 0x%x\n", val, value);
- printk("trigger: pointer = 0x%x\n", snd_dma_pointer(chip->dma8, chip->dma_size));
+ printk(KERN_DEBUG "trigger: val = 0x%x, value = 0x%x\n", val, value);
+ printk(KERN_DEBUG "trigger: pointer = 0x%x\n",
+ snd_dma_pointer(chip->dma8, chip->dma_size));
#endif
snd_es1688_write(chip, 0xb8, (val & 0xf0) | value);
spin_unlock(&chip->reg_lock);
unsigned char dma_cmd;
unsigned int address_high;
- // snd_printk("dma_transfer: addr=0x%x, buf=0x%lx, count=0x%x\n", addr, (long) buf, count);
+ snd_printdd("dma_transfer: addr=0x%x, buf=0x%lx, count=0x%x\n",
+ addr, buf_addr, count);
if (gus->gf1.dma1 > 3) {
if (gus->gf1.enh_mode) {
snd_gf1_dma_ack(gus);
snd_dma_program(gus->gf1.dma1, buf_addr, count, dma_cmd & SNDRV_GF1_DMA_READ ? DMA_MODE_READ : DMA_MODE_WRITE);
#if 0
- snd_printk("address = 0x%x, count = 0x%x, dma_cmd = 0x%x\n", address << 1, count, dma_cmd);
+ snd_printk(KERN_DEBUG "address = 0x%x, count = 0x%x, dma_cmd = 0x%x\n",
+ address << 1, count, dma_cmd);
#endif
spin_lock_irqsave(&gus->reg_lock, flags);
if (gus->gf1.enh_mode) {
snd_gf1_dma_program(gus, block->addr, block->buf_addr, block->count, (unsigned short) block->cmd);
kfree(block);
#if 0
- printk("program dma (IRQ) - addr = 0x%x, buffer = 0x%lx, count = 0x%x, cmd = 0x%x\n", addr, (long) buffer, count, cmd);
+ snd_printd(KERN_DEBUG "program dma (IRQ) - "
+ "addr = 0x%x, buffer = 0x%lx, count = 0x%x, cmd = 0x%x\n",
+ block->addr, block->buf_addr, block->count, block->cmd);
#endif
}
}
*block = *__block;
block->next = NULL;
-#if 0
- printk("addr = 0x%x, buffer = 0x%lx, count = 0x%x, cmd = 0x%x\n", block->addr, (long) block->buffer, block->count, block->cmd);
-#endif
-#if 0
- printk("gus->gf1.dma_data_pcm_last = 0x%lx\n", (long)gus->gf1.dma_data_pcm_last);
- printk("gus->gf1.dma_data_pcm = 0x%lx\n", (long)gus->gf1.dma_data_pcm);
-#endif
+
+ snd_printdd("addr = 0x%x, buffer = 0x%lx, count = 0x%x, cmd = 0x%x\n",
+ block->addr, (long) block->buffer, block->count,
+ block->cmd);
+
+ snd_printdd("gus->gf1.dma_data_pcm_last = 0x%lx\n",
+ (long)gus->gf1.dma_data_pcm_last);
+ snd_printdd("gus->gf1.dma_data_pcm = 0x%lx\n",
+ (long)gus->gf1.dma_data_pcm);
+
spin_lock_irqsave(&gus->dma_lock, flags);
if (synth) {
if (gus->gf1.dma_data_synth_last) {
if (status == 0)
return IRQ_RETVAL(handled);
handled = 1;
- // snd_printk("IRQ: status = 0x%x\n", status);
+ /* snd_printk(KERN_DEBUG "IRQ: status = 0x%x\n", status); */
if (status & 0x02) {
STAT_ADD(gus->gf1.interrupt_stat_midi_in);
if (gus->gf1.interrupt_handler_midi_in)
continue; /* multi request */
already |= _current_; /* mark request */
#if 0
- printk("voice = %i, voice_status = 0x%x, voice_verify = %i\n", voice, voice_status, inb(GUSP(gus, GF1PAGE)));
+ printk(KERN_DEBUG "voice = %i, voice_status = 0x%x, "
+ "voice_verify = %i\n",
+ voice, voice_status, inb(GUSP(gus, GF1PAGE)));
#endif
pvoice = &gus->gf1.voices[voice];
if (pvoice->use) {
count += offset & 31;
offset &= ~31;
- // snd_printk("block change - offset = 0x%x, count = 0x%x\n", offset, count);
+ /*
+ snd_printk(KERN_DEBUG "block change - offset = 0x%x, count = 0x%x\n",
+ offset, count);
+ */
memset(&block, 0, sizeof(block));
block.cmd = SNDRV_GF1_DMA_IRQ;
if (snd_pcm_format_unsigned(runtime->format))
curr = begin + (pcmp->bpos * pcmp->block_size) / runtime->channels;
end = curr + (pcmp->block_size / runtime->channels);
end -= snd_pcm_format_width(runtime->format) == 16 ? 2 : 1;
- // snd_printk("init: curr=0x%x, begin=0x%x, end=0x%x, ctrl=0x%x, ramp=0x%x, rate=0x%x\n", curr, begin, end, voice_ctrl, ramp_ctrl, rate);
+ /*
+ snd_printk(KERN_DEBUG "init: curr=0x%x, begin=0x%x, end=0x%x, "
+ "ctrl=0x%x, ramp=0x%x, rate=0x%x\n",
+ curr, begin, end, voice_ctrl, ramp_ctrl, rate);
+ */
pan = runtime->channels == 2 ? (!voice ? 1 : 14) : 8;
vol = !voice ? gus->gf1.pcm_volume_level_left : gus->gf1.pcm_volume_level_right;
spin_lock_irqsave(&gus->reg_lock, flags);
ramp_ctrl = (snd_gf1_read8(gus, SNDRV_GF1_VB_VOLUME_CONTROL) & ~0xa4) | 0x03;
#if 0
snd_gf1_select_voice(gus, pvoice->number);
- printk("position = 0x%x\n", (snd_gf1_read_addr(gus, SNDRV_GF1_VA_CURRENT, voice_ctrl & 4) >> 4));
+ printk(KERN_DEBUG "position = 0x%x\n",
+ (snd_gf1_read_addr(gus, SNDRV_GF1_VA_CURRENT, voice_ctrl & 4) >> 4));
snd_gf1_select_voice(gus, pcmp->pvoices[1]->number);
- printk("position = 0x%x\n", (snd_gf1_read_addr(gus, SNDRV_GF1_VA_CURRENT, voice_ctrl & 4) >> 4));
+ printk(KERN_DEBUG "position = 0x%x\n",
+ (snd_gf1_read_addr(gus, SNDRV_GF1_VA_CURRENT, voice_ctrl & 4) >> 4));
snd_gf1_select_voice(gus, pvoice->number);
#endif
pcmp->bpos++;
unsigned int len;
unsigned long flags;
- // printk("poke block; buf = 0x%x, pos = %i, count = %i, port = 0x%x\n", (int)buf, pos, count, gus->gf1.port);
+ /*
+ printk(KERN_DEBUG
+ "poke block; buf = 0x%x, pos = %i, count = %i, port = 0x%x\n",
+ (int)buf, pos, count, gus->gf1.port);
+ */
while (count > 0) {
len = count;
if (len > 512) /* limit, to allow IRQ */
runtime->private_free = snd_gf1_pcm_playback_free;
#if 0
- printk("playback.buffer = 0x%lx, gf1.pcm_buffer = 0x%lx\n", (long) pcm->playback.buffer, (long) gus->gf1.pcm_buffer);
+ printk(KERN_DEBUG "playback.buffer = 0x%lx, gf1.pcm_buffer = 0x%lx\n",
+ (long) pcm->playback.buffer, (long) gus->gf1.pcm_buffer);
#endif
if ((err = snd_gf1_dma_init(gus)) < 0)
return err;
}
spin_unlock_irqrestore(&gus->uart_cmd_lock, flags);
#if 0
- snd_printk("read init - enable = %i, cmd = 0x%x, stat = 0x%x\n", gus->uart_enable, gus->gf1.uart_cmd, snd_gf1_uart_stat(gus));
- snd_printk("[0x%x] reg (ctrl/status) = 0x%x, reg (data) = 0x%x (page = 0x%x)\n", gus->gf1.port + 0x100, inb(gus->gf1.port + 0x100), inb(gus->gf1.port + 0x101), inb(gus->gf1.port + 0x102));
+ snd_printk(KERN_DEBUG
+ "read init - enable = %i, cmd = 0x%x, stat = 0x%x\n",
+ gus->uart_enable, gus->gf1.uart_cmd, snd_gf1_uart_stat(gus));
+ snd_printk(KERN_DEBUG
+ "[0x%x] reg (ctrl/status) = 0x%x, reg (data) = 0x%x "
+ "(page = 0x%x)\n",
+ gus->gf1.port + 0x100, inb(gus->gf1.port + 0x100),
+ inb(gus->gf1.port + 0x101), inb(gus->gf1.port + 0x102));
#endif
return 0;
}
unsigned long port = bus->private_value;
#if 0
- printk("i2c_setlines - 0x%lx <- %i,%i\n", port, ctrl, data);
+ printk(KERN_DEBUG "i2c_setlines - 0x%lx <- %i,%i\n", port, ctrl, data);
#endif
outb((data << 1) | ctrl, port);
udelay(10);
res = inb(port) & 1;
#if 0
- printk("i2c_getclockline - 0x%lx -> %i\n", port, res);
+ printk(KERN_DEBUG "i2c_getclockline - 0x%lx -> %i\n", port, res);
#endif
return res;
}
udelay(10);
res = (inb(port) & 2) >> 1;
#if 0
- printk("i2c_getdataline - 0x%lx -> %i\n", port, res);
+ printk(KERN_DEBUG "i2c_getdataline - 0x%lx -> %i\n", port, res);
#endif
return res;
}
snd_gf1_poke(gus, local, d);
snd_gf1_poke(gus, local + 1, d + 1);
#if 0
- printk("d = 0x%x, local = 0x%x, local + 1 = 0x%x, idx << 22 = 0x%x\n",
+ printk(KERN_DEBUG "d = 0x%x, local = 0x%x, "
+ "local + 1 = 0x%x, idx << 22 = 0x%x\n",
d,
snd_gf1_peek(gus, local),
snd_gf1_peek(gus, local + 1),
}
}
#if 0
- printk("sizes: %i %i %i %i\n", sizes[0], sizes[1], sizes[2], sizes[3]);
+ printk(KERN_DEBUG "sizes: %i %i %i %i\n",
+ sizes[0], sizes[1], sizes[2], sizes[3]);
#endif
}
lmct = (psizes[3] << 24) | (psizes[2] << 16) |
(psizes[1] << 8) | psizes[0];
#if 0
- printk("lmct = 0x%08x\n", lmct);
+ printk(KERN_DEBUG "lmct = 0x%08x\n", lmct);
#endif
for (i = 0; i < ARRAY_SIZE(lmc); i++)
if (lmct == lmc[i]) {
#if 0
- printk("found !!! %i\n", i);
+ printk(KERN_DEBUG "found !!! %i\n", i);
#endif
snd_gf1_write16(gus, SNDRV_GF1_GW_MEMORY_CONFIG, (snd_gf1_look16(gus, SNDRV_GF1_GW_MEMORY_CONFIG) & 0xfff0) | i);
snd_interwave_bank_sizes(gus, psizes);
unsigned char result;
#if 0
outb(0x1d, port); /* password */
- printk("read [0x%lx] = 0x%x\n", port, inb(port));
+ printk(KERN_DEBUG "read [0x%lx] = 0x%x\n", port, inb(port));
#endif
outb(reg, chip->port); /* register */
result = inb(chip->port + 1);
#if 0
- printk("read [0x%lx] = 0x%x [0x%x]\n", port, result, inb(port));
+ printk(KERN_DEBUG "read [0x%lx] = 0x%x [0x%x]\n",
+ port, result, inb(port));
#endif
return result;
}
snd_printk(KERN_ERR PFX "can't grab port 0x%lx\n", port);
return -EBUSY;
}
- // snd_printk("REG 0A = 0x%x\n", snd_opl3sa2_read(chip, 0x0a));
+ /*
+ snd_printk(KERN_DEBUG "REG 0A = 0x%x\n",
+ snd_opl3sa2_read(chip, 0x0a));
+ */
chip->version = 0;
tmp = snd_opl3sa2_read(chip, OPL3SA2_MISC);
if (tmp == 0xff) {
{
struct snd_opl3sa2 *chip = card->private_data;
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, card);
release_and_free_resource(chip->res_port);
}
if (card == NULL)
return NULL;
strcpy(card->driver, "OPL3SA2");
- strcpy(card->shortname, "Yamaha OPL3-SA2");
+ strcpy(card->shortname, "Yamaha OPL3-SA");
chip = card->private_data;
spin_lock_init(&chip->reg_lock);
chip->irq = -1;
#endif /* OPTi93X */
default:
- snd_printk("chip %d not supported\n", hardware);
+ snd_printk(KERN_ERR "chip %d not supported\n", hardware);
return -ENODEV;
}
return 0;
#endif /* OPTi93X */
default:
- snd_printk("chip %d not supported\n", chip->hardware);
+ snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware);
}
spin_unlock_irqrestore(&chip->lock, flags);
#endif /* OPTi93X */
default:
- snd_printk("chip %d not supported\n", chip->hardware);
+ snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware);
}
spin_unlock_irqrestore(&chip->lock, flags);
#endif /* OPTi93X */
default:
- snd_printk("chip %d not supported\n", chip->hardware);
+ snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware);
return -EINVAL;
}
wss_base_bits = 0x02;
break;
default:
- snd_printk("WSS port 0x%lx not valid\n", chip->wss_base);
+ snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n",
+ chip->wss_base);
goto __skip_base;
}
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
irq_bits = 0x04;
break;
default:
- snd_printk("WSS irq # %d not valid\n", chip->irq);
+ snd_printk(KERN_WARNING "WSS irq # %d not valid\n", chip->irq);
goto __skip_resources;
}
dma_bits = 0x03;
break;
default:
- snd_printk("WSS dma1 # %d not valid\n", chip->dma1);
+ snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n",
+ chip->dma1);
goto __skip_resources;
}
#if defined(CS4231) || defined(OPTi93X)
if (chip->dma1 == chip->dma2) {
- snd_printk("don't want to share dmas\n");
+ snd_printk(KERN_ERR "don't want to share dmas\n");
return -EBUSY;
}
case 1:
break;
default:
- snd_printk("WSS dma2 # %d not valid\n", chip->dma2);
+ snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n",
+ chip->dma2);
goto __skip_resources;
}
dma_bits |= 0x04;
mpu_port_bits = 0x00;
break;
default:
- snd_printk("MPU-401 port 0x%lx not valid\n",
+ snd_printk(KERN_WARNING
+ "MPU-401 port 0x%lx not valid\n",
chip->mpu_port);
goto __skip_mpu;
}
mpu_irq_bits = 0x01;
break;
default:
- snd_printk("MPU-401 irq # %d not valid\n",
+ snd_printk(KERN_WARNING "MPU-401 irq # %d not valid\n",
chip->mpu_irq);
goto __skip_mpu;
}
if (chip->wss_base == SNDRV_AUTO_PORT) {
chip->wss_base = snd_legacy_find_free_ioport(possible_ports, 4);
if (chip->wss_base < 0) {
- snd_printk("unable to find a free WSS port\n");
+ snd_printk(KERN_ERR "unable to find a free WSS port\n");
return -EBUSY;
}
}
chip->fm_port, chip->fm_port + 4 - 1);
}
if (opl3) {
-#ifdef CS4231
- const int t1dev = 1;
-#else
- const int t1dev = 0;
-#endif
- if ((error = snd_opl3_timer_new(opl3, t1dev, t1dev+1)) < 0)
- return error;
- if ((error = snd_opl3_hwdep_new(opl3, 0, 1, &synth)) < 0)
+ error = snd_opl3_hwdep_new(opl3, 0, 1, &synth);
+ if (error < 0)
return error;
}
}
#if defined(CS4231) || defined(OPTi93X)
if (dma2 == SNDRV_AUTO_DMA) {
if ((dma2 = snd_legacy_find_free_dma(possible_dma2s[dma1 % 4])) < 0) {
- snd_printk("unable to find a free DMA2\n");
+ snd_printk(KERN_ERR "unable to find a free DMA2\n");
return -EBUSY;
}
}
static int snd_dt019x_input_sw_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
{
- static char *texts[5] = {
+ static const char *texts[5] = {
"CD", "Mic", "Line", "Synth", "Master"
};
return change;
}
+/*
+ * ALS4000 mono recording control switch
+ */
+
+static int snd_als4k_mono_capture_route_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char *texts[3] = {
+ "L chan only", "R chan only", "L ch/2 + R ch/2"
+ };
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 3;
+ if (uinfo->value.enumerated.item > 2)
+ uinfo->value.enumerated.item = 2;
+ strcpy(uinfo->value.enumerated.name,
+ texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int snd_als4k_mono_capture_route_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sb *sb = snd_kcontrol_chip(kcontrol);
+ unsigned long flags;
+ unsigned char oval;
+
+ spin_lock_irqsave(&sb->mixer_lock, flags);
+ oval = snd_sbmixer_read(sb, SB_ALS4000_MONO_IO_CTRL);
+ spin_unlock_irqrestore(&sb->mixer_lock, flags);
+ oval >>= 6;
+ if (oval > 2)
+ oval = 2;
+
+ ucontrol->value.enumerated.item[0] = oval;
+ return 0;
+}
+
+static int snd_als4k_mono_capture_route_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_sb *sb = snd_kcontrol_chip(kcontrol);
+ unsigned long flags;
+ int change;
+ unsigned char nval, oval;
+
+ if (ucontrol->value.enumerated.item[0] > 2)
+ return -EINVAL;
+ spin_lock_irqsave(&sb->mixer_lock, flags);
+ oval = snd_sbmixer_read(sb, SB_ALS4000_MONO_IO_CTRL);
+
+ nval = (oval & ~(3 << 6))
+ | (ucontrol->value.enumerated.item[0] << 6);
+ change = nval != oval;
+ if (change)
+ snd_sbmixer_write(sb, SB_ALS4000_MONO_IO_CTRL, nval);
+ spin_unlock_irqrestore(&sb->mixer_lock, flags);
+ return change;
+}
+
/*
* SBPRO input multiplexer
*/
static int snd_sb8mixer_info_mux(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
{
- static char *texts[3] = {
+ static const char *texts[3] = {
"Mic", "CD", "Line"
};
.get = snd_dt019x_input_sw_get,
.put = snd_dt019x_input_sw_put,
},
+ [SB_MIX_MONO_CAPTURE_ALS4K] = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = snd_als4k_mono_capture_route_info,
+ .get = snd_als4k_mono_capture_route_get,
+ .put = snd_als4k_mono_capture_route_put,
+ },
};
struct snd_kcontrol *ctl;
int err;
};
static struct sbmix_elem *snd_dt019x_controls[] = {
+ /* ALS4000 below has some parts which we might be lacking,
+ * e.g. snd_als4000_ctl_mono_playback_switch - check it! */
&snd_dt019x_ctl_master_play_vol,
&snd_dt019x_ctl_pcm_play_vol,
&snd_dt019x_ctl_synth_play_vol,
/*
* ALS4000 specific mixer elements
*/
-/* FIXME: SB_ALS4000_MONO_IO_CTRL needs output select ctrl! */
static struct sbmix_elem snd_als4000_ctl_master_mono_playback_switch =
SB_SINGLE("Master Mono Playback Switch", SB_ALS4000_MONO_IO_CTRL, 5, 1);
-static struct sbmix_elem snd_als4000_ctl_master_mono_capture_route =
- SB_SINGLE("Master Mono Capture Route", SB_ALS4000_MONO_IO_CTRL, 6, 0x03);
-/* FIXME: mono playback switch also available on DT019X? */
+static struct sbmix_elem snd_als4k_ctl_master_mono_capture_route = {
+ .name = "Master Mono Capture Route",
+ .type = SB_MIX_MONO_CAPTURE_ALS4K
+ };
static struct sbmix_elem snd_als4000_ctl_mono_playback_switch =
SB_SINGLE("Mono Playback Switch", SB_DT019X_OUTPUT_SW2, 0, 1);
static struct sbmix_elem snd_als4000_ctl_mic_20db_boost =
SB_SINGLE("Mic Boost (+20dB)", SB_ALS4000_MIC_IN_GAIN, 0, 0x03);
-static struct sbmix_elem snd_als4000_ctl_mixer_loopback =
- SB_SINGLE("Analog Loopback", SB_ALS4000_MIC_IN_GAIN, 7, 0x01);
+static struct sbmix_elem snd_als4000_ctl_mixer_analog_loopback =
+ SB_SINGLE("Analog Loopback Switch", SB_ALS4000_MIC_IN_GAIN, 7, 0x01);
+static struct sbmix_elem snd_als4000_ctl_mixer_digital_loopback =
+ SB_SINGLE("Digital Loopback Switch",
+ SB_ALS4000_CR3_CONFIGURATION, 7, 0x01);
/* FIXME: functionality of 3D controls might be swapped, I didn't find
* a description of how to identify what is supposed to be what */
static struct sbmix_elem snd_als4000_3d_control_switch =
SB_SINGLE("3D Control - Wide", SB_ALS4000_3D_TIME_DELAY, 0, 0x0f);
static struct sbmix_elem snd_als4000_3d_control_poweroff_switch =
SB_SINGLE("3D PowerOff Switch", SB_ALS4000_3D_TIME_DELAY, 4, 0x01);
+static struct sbmix_elem snd_als4000_ctl_3db_freq_control_switch =
+ SB_SINGLE("Master Playback 8kHz / 20kHz LPF Switch",
+ SB_ALS4000_FMDAC, 5, 0x01);
#ifdef NOT_AVAILABLE
static struct sbmix_elem snd_als4000_ctl_fmdac =
SB_SINGLE("FMDAC Switch (Option ?)", SB_ALS4000_FMDAC, 0, 0x01);
#endif
static struct sbmix_elem *snd_als4000_controls[] = {
- &snd_sb16_ctl_master_play_vol,
- &snd_dt019x_ctl_pcm_play_switch,
- &snd_sb16_ctl_pcm_play_vol,
- &snd_sb16_ctl_synth_capture_route,
- &snd_dt019x_ctl_synth_play_switch,
- &snd_sb16_ctl_synth_play_vol,
- &snd_sb16_ctl_cd_capture_route,
- &snd_sb16_ctl_cd_play_switch,
- &snd_sb16_ctl_cd_play_vol,
- &snd_sb16_ctl_line_capture_route,
- &snd_sb16_ctl_line_play_switch,
- &snd_sb16_ctl_line_play_vol,
- &snd_sb16_ctl_mic_capture_route,
- &snd_als4000_ctl_mic_20db_boost,
- &snd_sb16_ctl_auto_mic_gain,
- &snd_sb16_ctl_mic_play_switch,
- &snd_sb16_ctl_mic_play_vol,
- &snd_sb16_ctl_pc_speaker_vol,
- &snd_sb16_ctl_capture_vol,
- &snd_sb16_ctl_play_vol,
- &snd_als4000_ctl_master_mono_playback_switch,
- &snd_als4000_ctl_master_mono_capture_route,
- &snd_als4000_ctl_mono_playback_switch,
- &snd_als4000_ctl_mixer_loopback,
- &snd_als4000_3d_control_switch,
- &snd_als4000_3d_control_ratio,
- &snd_als4000_3d_control_freq,
- &snd_als4000_3d_control_delay,
- &snd_als4000_3d_control_poweroff_switch,
+ /* ALS4000a.PDF regs page */
+ &snd_sb16_ctl_master_play_vol, /* MX30/31 12 */
+ &snd_dt019x_ctl_pcm_play_switch, /* MX4C 16 */
+ &snd_sb16_ctl_pcm_play_vol, /* MX32/33 12 */
+ &snd_sb16_ctl_synth_capture_route, /* MX3D/3E 14 */
+ &snd_dt019x_ctl_synth_play_switch, /* MX4C 16 */
+ &snd_sb16_ctl_synth_play_vol, /* MX34/35 12/13 */
+ &snd_sb16_ctl_cd_capture_route, /* MX3D/3E 14 */
+ &snd_sb16_ctl_cd_play_switch, /* MX3C 14 */
+ &snd_sb16_ctl_cd_play_vol, /* MX36/37 13 */
+ &snd_sb16_ctl_line_capture_route, /* MX3D/3E 14 */
+ &snd_sb16_ctl_line_play_switch, /* MX3C 14 */
+ &snd_sb16_ctl_line_play_vol, /* MX38/39 13 */
+ &snd_sb16_ctl_mic_capture_route, /* MX3D/3E 14 */
+ &snd_als4000_ctl_mic_20db_boost, /* MX4D 16 */
+ &snd_sb16_ctl_mic_play_switch, /* MX3C 14 */
+ &snd_sb16_ctl_mic_play_vol, /* MX3A 13 */
+ &snd_sb16_ctl_pc_speaker_vol, /* MX3B 14 */
+ &snd_sb16_ctl_capture_vol, /* MX3F/40 15 */
+ &snd_sb16_ctl_play_vol, /* MX41/42 15 */
+ &snd_als4000_ctl_master_mono_playback_switch, /* MX4C 16 */
+ &snd_als4k_ctl_master_mono_capture_route, /* MX4B 16 */
+ &snd_als4000_ctl_mono_playback_switch, /* MX4C 16 */
+ &snd_als4000_ctl_mixer_analog_loopback, /* MX4D 16 */
+ &snd_als4000_ctl_mixer_digital_loopback, /* CR3 21 */
+ &snd_als4000_3d_control_switch, /* MX50 17 */
+ &snd_als4000_3d_control_ratio, /* MX50 17 */
+ &snd_als4000_3d_control_freq, /* MX50 17 */
+ &snd_als4000_3d_control_delay, /* MX51 18 */
+ &snd_als4000_3d_control_poweroff_switch, /* MX51 18 */
+ &snd_als4000_ctl_3db_freq_control_switch, /* MX4F 17 */
#ifdef NOT_AVAILABLE
&snd_als4000_ctl_fmdac,
&snd_als4000_ctl_qsound,
};
static unsigned char als4000_saved_regs[] = {
+ /* please verify in dsheet whether regs to be added
+ are actually real H/W or just dummy */
SB_DSP4_MASTER_DEV, SB_DSP4_MASTER_DEV + 1,
SB_DSP4_OUTPUT_SW,
SB_DSP4_PCM_DEV, SB_DSP4_PCM_DEV + 1,
SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT,
SB_DSP4_SYNTH_DEV, SB_DSP4_SYNTH_DEV + 1,
SB_DSP4_CD_DEV, SB_DSP4_CD_DEV + 1,
- SB_DSP4_MIC_AGC,
SB_DSP4_MIC_DEV,
SB_DSP4_SPEAKER_DEV,
SB_DSP4_IGAIN_DEV, SB_DSP4_IGAIN_DEV + 1,
SB_DT019X_OUTPUT_SW2,
SB_ALS4000_MONO_IO_CTRL,
SB_ALS4000_MIC_IN_GAIN,
+ SB_ALS4000_FMDAC,
SB_ALS4000_3D_SND_FX,
SB_ALS4000_3D_TIME_DELAY,
+ SB_ALS4000_CR3_CONFIGURATION,
};
static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs)
snd_printk(KERN_ERR PFX "no OPL device at 0x%x-0x%x ?\n",
0x388, 0x388 + 2);
} else {
- err = snd_opl3_timer_new(opl3, 0, 1);
- if (err < 0)
- goto err_unmap2;
-
err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
if (err < 0)
goto err_unmap2;
return 0;
#endif
if (cs4232_pcm_port[dev] == SNDRV_AUTO_PORT) {
- snd_printk("specify CS4232 port\n");
+ snd_printk(KERN_ERR "specify CS4232 port\n");
return 0;
}
if (ics2115_port[dev] == SNDRV_AUTO_PORT) {
- snd_printk("specify ICS2115 port\n");
+ snd_printk(KERN_ERR "specify ICS2115 port\n");
return 0;
}
return 1;
wbuf[1] = i >> 7;
if (snd_wavefront_cmd (dev, WFC_IDENTIFY_SAMPLE_TYPE, rbuf, wbuf)) {
- snd_printk("cannot identify sample "
+ snd_printk(KERN_WARNING "cannot identify sample "
"type of slot %d\n", i);
dev->sample_status[i] = WF_ST_EMPTY;
continue;
snd_wss_wait(chip);
#ifdef CONFIG_SND_DEBUG
if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
- snd_printk("out: auto calibration time out - reg = 0x%x, value = 0x%x\n", reg, value);
+ snd_printk(KERN_DEBUG "out: auto calibration time out "
+ "- reg = 0x%x, value = 0x%x\n", reg, value);
#endif
wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | reg);
wss_outb(chip, CS4231P(REG), value);
snd_wss_wait(chip);
#ifdef CONFIG_SND_DEBUG
if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
- snd_printk("in: auto calibration time out - reg = 0x%x\n", reg);
+ snd_printk(KERN_DEBUG "in: auto calibration time out "
+ "- reg = 0x%x\n", reg);
#endif
wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | reg);
mb();
wss_outb(chip, CS4231P(REG), val);
chip->eimage[CS4236_REG(reg)] = val;
#if 0
- printk("ext out : reg = 0x%x, val = 0x%x\n", reg, val);
+ printk(KERN_DEBUG "ext out : reg = 0x%x, val = 0x%x\n", reg, val);
#endif
}
EXPORT_SYMBOL(snd_cs4236_ext_out);
{
unsigned char res;
res = wss_inb(chip, CS4231P(REG));
- printk("ext in : reg = 0x%x, val = 0x%x\n", reg, res);
+ printk(KERN_DEBUG "ext in : reg = 0x%x, val = 0x%x\n",
+ reg, res);
return res;
}
#endif
snd_wss_wait(chip);
#ifdef CONFIG_SND_DEBUG
if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
- snd_printk("mce_up - auto calibration time out (0)\n");
+ snd_printk(KERN_DEBUG
+ "mce_up - auto calibration time out (0)\n");
#endif
spin_lock_irqsave(&chip->reg_lock, flags);
chip->mce_bit |= CS4231_MCE;
timeout = wss_inb(chip, CS4231P(REGSEL));
if (timeout == 0x80)
- snd_printk("mce_up [0x%lx]: serious init problem - codec still busy\n", chip->port);
+ snd_printk(KERN_DEBUG "mce_up [0x%lx]: "
+ "serious init problem - codec still busy\n",
+ chip->port);
if (!(timeout & CS4231_MCE))
wss_outb(chip, CS4231P(REGSEL),
chip->mce_bit | (timeout & 0x1f));
#ifdef CONFIG_SND_DEBUG
if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
- snd_printk("mce_down [0x%lx] - auto calibration time out (0)\n", (long)CS4231P(REGSEL));
+ snd_printk(KERN_DEBUG "mce_down [0x%lx] - "
+ "auto calibration time out (0)\n",
+ (long)CS4231P(REGSEL));
#endif
spin_lock_irqsave(&chip->reg_lock, flags);
chip->mce_bit &= ~CS4231_MCE;
wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | (timeout & 0x1f));
spin_unlock_irqrestore(&chip->reg_lock, flags);
if (timeout == 0x80)
- snd_printk("mce_down [0x%lx]: serious init problem - codec still busy\n", chip->port);
+ snd_printk(KERN_DEBUG "mce_down [0x%lx]: "
+ "serious init problem - codec still busy\n",
+ chip->port);
if ((timeout & CS4231_MCE) == 0 || !(chip->hardware & hw_mask))
return;
if (channels > 1)
rformat |= CS4231_STEREO;
#if 0
- snd_printk("get_format: 0x%x (mode=0x%x)\n", format, mode);
+ snd_printk(KERN_DEBUG "get_format: 0x%x (mode=0x%x)\n", format, mode);
#endif
return rformat;
}
snd_wss_mce_down(chip);
#ifdef SNDRV_DEBUG_MCE
- snd_printk("init: (1)\n");
+ snd_printk(KERN_DEBUG "init: (1)\n");
#endif
snd_wss_mce_up(chip);
spin_lock_irqsave(&chip->reg_lock, flags);
snd_wss_mce_down(chip);
#ifdef SNDRV_DEBUG_MCE
- snd_printk("init: (2)\n");
+ snd_printk(KERN_DEBUG "init: (2)\n");
#endif
snd_wss_mce_up(chip);
snd_wss_mce_down(chip);
#ifdef SNDRV_DEBUG_MCE
- snd_printk("init: (3) - afei = 0x%x\n",
+ snd_printk(KERN_DEBUG "init: (3) - afei = 0x%x\n",
chip->image[CS4231_ALT_FEATURE_1]);
#endif
snd_wss_mce_down(chip);
#ifdef SNDRV_DEBUG_MCE
- snd_printk("init: (4)\n");
+ snd_printk(KERN_DEBUG "init: (4)\n");
#endif
snd_wss_mce_up(chip);
snd_wss_mce_down(chip);
#ifdef SNDRV_DEBUG_MCE
- snd_printk("init: (5)\n");
+ snd_printk(KERN_DEBUG "init: (5)\n");
#endif
}
} else if (rev == 0x03) {
chip->hardware = WSS_HW_CS4236B;
} else {
- snd_printk("unknown CS chip with version 0x%x\n", rev);
+ snd_printk(KERN_ERR
+ "unknown CS chip with version 0x%x\n", rev);
return -ENODEV; /* unknown CS4231 chip? */
}
}
case 6:
break;
default:
- snd_printk("unknown CS4235 chip (enhanced version = 0x%x)\n", id);
+ snd_printk(KERN_WARNING
+ "unknown CS4235 chip "
+ "(enhanced version = 0x%x)\n",
+ id);
}
} else if ((id & 0x1f) == 0x0b) { /* CS4236/B */
switch (id >> 5) {
chip->hardware = WSS_HW_CS4236B;
break;
default:
- snd_printk("unknown CS4236 chip (enhanced version = 0x%x)\n", id);
+ snd_printk(KERN_WARNING
+ "unknown CS4236 chip "
+ "(enhanced version = 0x%x)\n",
+ id);
}
} else if ((id & 0x1f) == 0x08) { /* CS4237B */
chip->hardware = WSS_HW_CS4237B;
case 7:
break;
default:
- snd_printk("unknown CS4237B chip (enhanced version = 0x%x)\n", id);
+ snd_printk(KERN_WARNING
+ "unknown CS4237B chip "
+ "(enhanced version = 0x%x)\n",
+ id);
}
} else if ((id & 0x1f) == 0x09) { /* CS4238B */
chip->hardware = WSS_HW_CS4238B;
case 7:
break;
default:
- snd_printk("unknown CS4238B chip (enhanced version = 0x%x)\n", id);
+ snd_printk(KERN_WARNING
+ "unknown CS4238B chip "
+ "(enhanced version = 0x%x)\n",
+ id);
}
} else if ((id & 0x1f) == 0x1e) { /* CS4239 */
chip->hardware = WSS_HW_CS4239;
case 6:
break;
default:
- snd_printk("unknown CS4239 chip (enhanced version = 0x%x)\n", id);
+ snd_printk(KERN_WARNING
+ "unknown CS4239 chip "
+ "(enhanced version = 0x%x)\n",
+ id);
}
} else {
- snd_printk("unknown CS4236/CS423xB chip (enhanced version = 0x%x)\n", id);
+ snd_printk(KERN_WARNING
+ "unknown CS4236/CS423xB chip "
+ "(enhanced version = 0x%x)\n", id);
}
}
}
wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | (timeout & 0x1f));
spin_unlock_irqrestore(&chip->reg_lock, flags);
if (timeout == 0x80)
- snd_printk("down [0x%lx]: serious init problem - codec still busy\n", chip->port);
+ snd_printk(KERN_ERR "down [0x%lx]: serious init problem "
+ "- codec still busy\n", chip->port);
if ((timeout & CS4231_MCE) == 0 ||
!(chip->hardware & (WSS_HW_CS4231_MASK | WSS_HW_CS4232_MASK))) {
return;
#if 0
if (chip->hardware & WSS_HW_CS4232_MASK) {
if (chip->res_cport == NULL)
- snd_printk("CS4232 control port features are not accessible\n");
+ snd_printk(KERN_ERR "CS4232 control port features are "
+ "not accessible\n");
}
#endif
projects / linux-2.6-omap-h63xx.git / commitdiff