]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
mac80211: require four hardware queues for QoS/HT
authorJohannes Berg <johannes@sipsolutions.net>
Fri, 2 May 2008 22:59:37 +0000 (00:59 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 14 May 2008 20:29:33 +0000 (16:29 -0400)
This patch makes mac80211 only announce QoS/HT support when
the underlying hardware has four (or more) queues.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Ron Rindjunksi <ron.rindjunksi@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
net/mac80211/iface.c
net/mac80211/mlme.c
net/mac80211/tx.c

index f41c7e0de622cd14cd65ca5cd3f3f6f975189888..5a9a3c6ef4821f61c41f48fc3863de2866c05240 100644 (file)
@@ -157,9 +157,10 @@ void ieee80211_if_set_type(struct net_device *dev, int type)
                ifsta->auth_algs = IEEE80211_AUTH_ALG_OPEN |
                        IEEE80211_AUTH_ALG_SHARED_KEY;
                ifsta->flags |= IEEE80211_STA_CREATE_IBSS |
-                       IEEE80211_STA_WMM_ENABLED |
                        IEEE80211_STA_AUTO_BSSID_SEL |
                        IEEE80211_STA_AUTO_CHANNEL_SEL;
+               if (sdata->local->hw.queues >= 4)
+                       ifsta->flags |= IEEE80211_STA_WMM_ENABLED;
 
                msdata = IEEE80211_DEV_TO_SUB_IF(sdata->local->mdev);
                sdata->bss = &msdata->u.ap;
index 55b85ae5bc11e85909f185f76229950fc4b861d2..108c6fc42fe2b6ac696d966e5347a4b5f9d9eb38 100644 (file)
@@ -272,6 +272,12 @@ static void ieee80211_sta_wmm_params(struct net_device *dev,
        int count;
        u8 *pos;
 
+       if (!(ifsta->flags & IEEE80211_STA_WMM_ENABLED))
+               return;
+
+       if (!wmm_param)
+               return;
+
        if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
                return;
        count = wmm_param[6] & 0x0f;
@@ -763,8 +769,10 @@ static void ieee80211_send_assoc(struct net_device *dev,
                *pos++ = 1; /* WME ver */
                *pos++ = 0;
        }
+
        /* wmm support is a must to HT */
-       if (wmm && sband->ht_info.ht_supported) {
+       if (wmm && (ifsta->flags & IEEE80211_STA_WMM_ENABLED) &&
+           sband->ht_info.ht_supported) {
                __le16 tmp = cpu_to_le16(sband->ht_info.cap);
                pos = skb_put(skb, sizeof(struct ieee80211_ht_cap)+2);
                *pos++ = WLAN_EID_HT_CAPABILITY;
@@ -2021,7 +2029,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
        else
                sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
 
-       if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param) {
+       if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param &&
+           (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
                struct ieee80211_ht_bss_info bss_info;
                ieee80211_ht_cap_ie_to_ht_info(
                                (struct ieee80211_ht_cap *)
@@ -2034,7 +2043,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 
        rate_control_rate_init(sta, local);
 
-       if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
+       if (elems.wmm_param) {
                sta->flags |= WLAN_STA_WME;
                rcu_read_unlock();
                ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
@@ -2817,10 +2826,8 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
 
        ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
 
-       if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
-               ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
-                                        elems.wmm_param_len);
-       }
+       ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
+                                elems.wmm_param_len);
 
        /* Do not send changes to driver if we are scanning. This removes
         * requirement that driver's bss_info_changed function needs to be
index f35eaea98e7316bcac44b45adb0d210ca3ad551e..3a03d7807c397c301f814ac46cf5247b76be3dfc 100644 (file)
@@ -1490,8 +1490,8 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
                rcu_read_unlock();
        }
 
-       /* receiver is QoS enabled, use a QoS type frame */
-       if (sta_flags & WLAN_STA_WME) {
+       /* receiver and we are QoS enabled, use a QoS type frame */
+       if (sta_flags & WLAN_STA_WME && local->hw.queues >= 4) {
                fc |= IEEE80211_STYPE_QOS_DATA;
                hdrlen += 2;
        }