o Fix order or rom register writes.
o Reduce udelays when writing rom registers.
This cuts the firmware init time by 40%.
o Do not reset core/memory clocks when reinitializing driver.
Firmware willl handle this when initialized.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
{
int i;
u32 data, size = 0;
- u32 flashaddr = NETXEN_BOOTLD_START, memaddr = NETXEN_BOOTLD_START;
+ u32 flashaddr = NETXEN_BOOTLD_START;
size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START)/4;
if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0)
return -EIO;
- adapter->pci_mem_write(adapter, memaddr, &data, 4);
+ adapter->pci_mem_write(adapter, flashaddr, &data, 4);
flashaddr += 4;
- memaddr += 4;
- cond_resched();
}
msleep(1);
long timeout = 0;
long done = 0;
+ cond_resched();
+
while (done == 0) {
done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS);
done &= 2;
static int do_rom_fast_read(struct netxen_adapter *adapter,
int addr, int *valp)
{
- cond_resched();
-
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
- netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
- udelay(100); /* prevent bursting on CRB */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+ netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
if (netxen_wait_rom_done(adapter)) {
printk("Error waiting for rom done\n");
}
/* reset abyte_cnt and dummy_byte_cnt */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
- udelay(100); /* prevent bursting on CRB */
+ udelay(10);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
*valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
{
int addr, val;
- int i, init_delay = 0;
+ int i, n, init_delay = 0;
struct crb_addr_pair *buf;
- unsigned offset, n;
+ unsigned offset;
u32 off;
/* resetall */
+ rom_lock(adapter);
netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
0xffffffff);
+ netxen_rom_unlock(adapter);
if (verbose) {
if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
- (n != 0xcafecafeUL) ||
+ (n != 0xcafecafe) ||
netxen_rom_fast_read(adapter, 4, &n) != 0) {
printk(KERN_ERR "%s: ERROR Reading crb_init area: "
"n: %08x\n", netxen_nic_driver_name, n);
/* do not reset PCI */
if (off == (ROMUSB_GLB + 0xbc))
continue;
+ if (off == (ROMUSB_GLB + 0xa8))
+ continue;
+ if (off == (ROMUSB_GLB + 0xc8)) /* core clock */
+ continue;
+ if (off == (ROMUSB_GLB + 0x24)) /* MN clock */
+ continue;
+ if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
+ continue;
if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
buf[i].data = 0x1020;
/* skip the function enable register */
continue;
}
+ init_delay = 1;
/* After writing this register, HW needs time for CRB */
/* to quiet down (else crb_window returns 0xffffffff) */
if (off == NETXEN_ROMUSB_GLB_SW_RESET) {
- init_delay = 1;
+ init_delay = 1000;
if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
/* hold xdma in reset also */
buf[i].data = NETXEN_NIC_XDMA_RESET;
+ buf[i].data = 0x8000ff;
}
}
adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
- if (init_delay == 1) {
- msleep(1000);
- init_delay = 0;
- }
- msleep(1);
+ msleep(init_delay);
}
kfree(buf);
static int
netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
{
- int ret = 0;
+ u32 val, timeout;
if (first_boot == 0x55555555) {
/* This is the first boot after power up */
+ adapter->pci_write_normalize(adapter,
+ NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
+
+ if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return 0;
/* PCI bus master workaround */
adapter->hw_read_wx(adapter,
/* clear the register for future unloads/loads */
adapter->pci_write_normalize(adapter,
NETXEN_CAM_RAM(0x1fc), 0);
- ret = -1;
+ return -EIO;
}
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
- /* Start P2 boot loader */
- adapter->pci_write_normalize(adapter,
- NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
- adapter->pci_write_normalize(adapter,
- NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
- }
+ /* Start P2 boot loader */
+ val = adapter->pci_read_normalize(adapter,
+ NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
+ adapter->pci_write_normalize(adapter,
+ NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
+ timeout = 0;
+ do {
+ msleep(1);
+ val = adapter->pci_read_normalize(adapter,
+ NETXEN_CAM_RAM(0x1fc));
+
+ if (++timeout > 5000)
+ return -EIO;
+
+ } while (val == NETXEN_BDINFO_MAGIC);
}
- return ret;
+ return 0;
}
static void netxen_set_port_mode(struct netxen_adapter *adapter)
CRB_CMDPEG_STATE, 0);
netxen_pinit_from_rom(adapter, 0);
msleep(1);
- netxen_load_firmware(adapter);
}
+ netxen_load_firmware(adapter);
if (NX_IS_REVISION_P3(revision_id))
netxen_pcie_strap_init(adapter);
}
- if ((first_boot == 0x55555555) &&
- (NX_IS_REVISION_P2(revision_id))) {
- /* Unlock the HW, prompting the boot sequence */
- adapter->pci_write_normalize(adapter,
- NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
- }
-
err = netxen_initialize_adapter_offload(adapter);
if (err)
goto err_out_iounmap;
adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
/* Handshake with the card before we register the devices. */
- netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+ err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+ if (err)
+ goto err_out_free_offload;
} /* first_driver */
if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
pci_disable_msi(pdev);
+err_out_free_offload:
if (first_driver)
netxen_free_adapter_offload(adapter);