]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
dmfe: convert to new API
authorStephen Hemminger <shemminger@vyatta.com>
Thu, 8 Jan 2009 02:01:20 +0000 (18:01 -0800)
committerDavid S. Miller <davem@davemloft.net>
Thu, 8 Jan 2009 02:01:20 +0000 (18:01 -0800)
Convert to internal net_device-stats and net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tulip/dmfe.c

index 28a5c51b43a0654a846a2a4fa33f92f64d516602..2e5c99941f35306b711c315be2585ea6452f4e35 100644 (file)
@@ -257,9 +257,6 @@ struct dmfe_board_info {
        u8 wol_mode;                    /* user WOL settings */
        struct timer_list timer;
 
-       /* System defined statistic counter */
-       struct net_device_stats stats;
-
        /* Driver defined statistic counter */
        unsigned long tx_fifo_underrun;
        unsigned long tx_loss_carrier;
@@ -316,7 +313,6 @@ static u8 SF_mode;          /* Special Function: 1:VLAN, 2:RX Flow Control
 static int dmfe_open(struct DEVICE *);
 static int dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
 static int dmfe_stop(struct DEVICE *);
-static struct net_device_stats * dmfe_get_stats(struct DEVICE *);
 static void dmfe_set_filter_mode(struct DEVICE *);
 static const struct ethtool_ops netdev_ethtool_ops;
 static u16 read_srom_word(long ,int);
@@ -351,6 +347,19 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *);
 
 /* DM910X network board routine ---------------------------- */
 
+static const struct net_device_ops netdev_ops = {
+       .ndo_open               = dmfe_open,
+       .ndo_stop               = dmfe_stop,
+       .ndo_start_xmit         = dmfe_start_xmit,
+       .ndo_set_multicast_list = dmfe_set_filter_mode,
+       .ndo_change_mtu         = eth_change_mtu,
+       .ndo_set_mac_address    = eth_mac_addr,
+       .ndo_validate_addr      = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+       .ndo_poll_controller    = poll_dmfe,
+#endif
+};
+
 /*
  *     Search DM910X board ,allocate space and register it
  */
@@ -442,14 +451,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
        dev->base_addr = db->ioaddr;
        dev->irq = pdev->irq;
        pci_set_drvdata(pdev, dev);
-       dev->open = &dmfe_open;
-       dev->hard_start_xmit = &dmfe_start_xmit;
-       dev->stop = &dmfe_stop;
-       dev->get_stats = &dmfe_get_stats;
-       dev->set_multicast_list = &dmfe_set_filter_mode;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-       dev->poll_controller = &poll_dmfe;
-#endif
+       dev->netdev_ops = &netdev_ops;
        dev->ethtool_ops = &netdev_ethtool_ops;
        netif_carrier_off(dev);
        spin_lock_init(&db->lock);
@@ -867,15 +869,15 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
 
                /* A packet sent completed */
                db->tx_packet_cnt--;
-               db->stats.tx_packets++;
+               dev->stats.tx_packets++;
 
                /* Transmit statistic counter */
                if ( tdes0 != 0x7fffffff ) {
                        /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
-                       db->stats.collisions += (tdes0 >> 3) & 0xf;
-                       db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+                       dev->stats.collisions += (tdes0 >> 3) & 0xf;
+                       dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
                        if (tdes0 & TDES0_ERR_MASK) {
-                               db->stats.tx_errors++;
+                               dev->stats.tx_errors++;
 
                                if (tdes0 & 0x0002) {   /* UnderRun */
                                        db->tx_fifo_underrun++;
@@ -969,13 +971,13 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
                        if (rdes0 & 0x8000) {
                                /* This is a error packet */
                                //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
-                               db->stats.rx_errors++;
+                               dev->stats.rx_errors++;
                                if (rdes0 & 1)
-                                       db->stats.rx_fifo_errors++;
+                                       dev->stats.rx_fifo_errors++;
                                if (rdes0 & 2)
-                                       db->stats.rx_crc_errors++;
+                                       dev->stats.rx_crc_errors++;
                                if (rdes0 & 0x80)
-                                       db->stats.rx_length_errors++;
+                                       dev->stats.rx_length_errors++;
                        }
 
                        if ( !(rdes0 & 0x8000) ||
@@ -1008,8 +1010,8 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
 
                                        skb->protocol = eth_type_trans(skb, dev);
                                        netif_rx(skb);
-                                       db->stats.rx_packets++;
-                                       db->stats.rx_bytes += rxlen;
+                                       dev->stats.rx_packets++;
+                                       dev->stats.rx_bytes += rxlen;
                                }
                        } else {
                                /* Reuse SKB buffer when the packet is error */
@@ -1024,20 +1026,6 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
        db->rx_ready_ptr = rxptr;
 }
 
-
-/*
- *     Get statistics from driver.
- */
-
-static struct net_device_stats * dmfe_get_stats(struct DEVICE *dev)
-{
-       struct dmfe_board_info *db = netdev_priv(dev);
-
-       DMFE_DBUG(0, "dmfe_get_stats", 0);
-       return &db->stats;
-}
-
-
 /*
  * Set DM910X multicast address
  */
@@ -1161,7 +1149,7 @@ static void dmfe_timer(unsigned long data)
 
        /* Operating Mode Check */
        if ( (db->dm910x_chk_mode & 0x1) &&
-               (db->stats.rx_packets > MAX_CHECK_PACKET) )
+               (dev->stats.rx_packets > MAX_CHECK_PACKET) )
                db->dm910x_chk_mode = 0x4;
 
        /* Dynamic reset DM910X : system error or transmit time-out */