+What: /sys/bus/pci/drivers/.../bind
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device location to this file will cause
+ the driver to attempt to bind to the device found at
+ this location. This is useful for overriding default
+ bindings. The format for the location is: DDDD:BB:DD.F.
+ That is Domain:Bus:Device.Function and is the same as
+ found in /sys/bus/pci/devices/. For example:
+ # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+ (Note: kernels before 2.6.28 may require echo -n).
+
+What: /sys/bus/pci/drivers/.../unbind
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device location to this file will cause the
+ driver to attempt to unbind from the device found at
+ this location. This may be useful when overriding default
+ bindings. The format for the location is: DDDD:BB:DD.F.
+ That is Domain:Bus:Device.Function and is the same as
+ found in /sys/bus/pci/devices/. For example:
+ # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+ (Note: kernels before 2.6.28 may require echo -n).
+
+What: /sys/bus/pci/drivers/.../new_id
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device ID to this file will attempt to
+ dynamically add a new device ID to a PCI device driver.
+ This may allow the driver to support more hardware than
+ was included in the driver's static device ID support
+ table at compile time. The format for the device ID is:
+ VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID,
+ Device ID, Subsystem Vendor ID, Subsystem Device ID,
+ Class, Class Mask, and Private Driver Data. The Vendor ID
+ and Device ID fields are required, the rest are optional.
+ Upon successfully adding an ID, the driver will probe
+ for the device and attempt to bind to it. For example:
+ # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
What: /sys/bus/pci/devices/.../vpd
Date: February 2008
Contact: Ben Hutchings <bhutchings@solarflare.com>
Note that, rcu_assign_pointer() and rcu_dereference() relate to
SRCU just as they do to other forms of RCU.
+
+15. The whole point of call_rcu(), synchronize_rcu(), and friends
+ is to wait until all pre-existing readers have finished before
+ carrying out some otherwise-destructive operation. It is
+ therefore critically important to -first- remove any path
+ that readers can follow that could be affected by the
+ destructive operation, and -only- -then- invoke call_rcu(),
+ synchronize_rcu(), or friends.
+
+ Because these primitives only wait for pre-existing readers,
+ it is the caller's responsibility to guarantee safety to
+ any subsequent readers.
+++ /dev/null
-This README escorted the skystar2-driver rewriting procedure. It describes the
-state of the new flexcop-driver set and some internals are written down here
-too.
-
-This document hopefully describes things about the flexcop and its
-device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
-drivers based on the skystar2.c and other information.
-
-Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
-touched and rewritten.
-
-History & News
-==============
- 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
-
-
-
-
-General coding processing
-=========================
-
-We should proceed as follows (as long as no one complains):
-
-0) Think before start writing code!
-
-1) rewriting the skystar2.c with the help of the flexcop register descriptions
-and splitting up the files to a pci-bus-part and a flexcop-part.
-The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
-device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
-
-2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
-and other pci drivers)
-
-3) make some beautification (see 'Improvements when rewriting (refactoring) is
-done')
-
-4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
-a wider tester audience.
-
-5) creating an usb-bus-part using the already written flexcop code for the pci
-card.
-
-Idea: create a kernel-object for the flexcop and export all important
-functions. This option saves kernel-memory, but maybe a lot of functions have
-to be exported to kernel namespace.
-
-
-Current situation
-=================
-
-0) Done :)
-1) Done (some minor issues left)
-2) Done
-3) Not ready yet, more information is necessary
-4) next to be done (see the table below)
-5) USB driver is working (yes, there are some minor issues)
-
-What seems to be ready?
------------------------
-
-1) Rewriting
-1a) i2c is cut off from the flexcop-pci.c and seems to work
-1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1e) eeprom (reading MAC address)
-1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
-1f) misc. register accesses for reading parameters (e.g. resetting, revision)
-1g) pid/mac filter (flexcop-hw-filter.c)
-1i) dvb-stuff initialization in flexcop.c (done)
-1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
-1j) remove flexcop initialization from flexcop-pci.c completely (done)
-1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
-1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
-non-static where possible, moved code to proper places)
-
-2) Search for errors in the leftover of flexcop-pci.c (partially done)
-5a) add MAC address reading
-5c) feeding of ISOC data to the software demux (format of the isochronous data
-and speed optimization, no real error) (thanks to Vadim Catana)
-
-What to do in the near future?
---------------------------------------
-(no special order here)
-
-5) USB driver
-5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
-
-Testing changes
----------------
-
-O = item is working
-P = item is partially working
-X = item is not working
-N = item does not apply here
-<empty field> = item need to be examined
-
- | PCI | USB
-item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
--------+-------+---------+---------+-------+-------+---------+---------+-------
-1a) | O | | | | N | N | N | N
-1b) | O | | | | | | O |
-1c) | N | N | | | N | N | O |
-1d) | O | O
-1e) | O | O
-1f) | P
-1g) | O
-1h) | P |
-1i) | O | N
-1j) | O | N
-1l) | O | N
-2) | O | N
-5a) | N | O
-5b)* | N |
-5c) | N | O
-
-* - not done yet
-
-Known bugs and problems and TODO
---------------------------------
-
-1g/h/l) when pid filtering is enabled on the pci card
-
-DMA usage currently:
- The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
- address and triggers an IRQ when it's full and starts writing to the second
- address. When the second address is full, the IRQ is triggered again, and
- the flexcop writes to first address again, and so on.
- The buffersize of each address is currently 640*188 bytes.
-
- Problem is, when using hw-pid-filtering and doing some low-bandwidth
- operation (like scanning) the buffers won't be filled enough to trigger
- the IRQ. That's why:
-
- When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
- is triggered. Is the current write address of DMA1 different to the one
- during the last IRQ, then the data is passed to the demuxer.
-
- There is an additional DMA-IRQ-method: packet count IRQ. This isn't
- implemented correctly yet.
-
- The solution is to disable HW PID filtering, but I don't know how the DVB
- API software demux behaves on slow systems with 45MBit/s TS.
-
-Solved bugs :)
---------------
-1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
-working)
-SOLUTION: also index 0 was affected, because net_translation is done for
-these indexes by default
-
-5b) isochronous transfer does only work in the first attempt (for the Sky2PC
-USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
-woke up again (don't know if this need fixes, see
-flexcop-fe-tuner.c:flexcop_sleep)
-
-NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
-anything in the while the driver is loaded the first time), no transfers take
-place anymore.
-
-Improvements when rewriting (refactoring) is done
-=================================================
-
-- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
- (enable sleeping for other demods than dvb-s)
-- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
-
-Debugging
----------
-- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
- with this flexcop, this is important, because i2c is now using the
- flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
- that, please tell us so).
-
-Everything which is identical in the following table, can be put into a common
-flexcop-module.
-
- PCI USB
--------------------------------------------------------------------------------
-Different:
-Register access: accessing IO memory USB control message
-I2C bus: I2C bus of the FC USB control message
-Data transfer: DMA isochronous transfer
-EEPROM transfer: through i2c bus not clear yet
-
-Identical:
-Streaming: accessing registers
-PID Filtering: accessing registers
-Sram destinations: accessing registers
-Tuner/Demod: I2C bus
-DVB-stuff: can be written for common use
-
-Acknowledgements (just for the rewriting part)
-================
-
-Bjarne Steinsbo thought a lot in the first place of the pci part for this code
-sharing idea.
-
-Andreas Oberritter for providing a recent PCI initialization template
-(pluto2.c).
-
-Boleslaw Ciesielski for pointing out a problem with firmware loader.
-
-Vadim Catana for correcting the USB transfer.
-
-comments, critics and ideas to linux-dvb@linuxtv.org.
-How to set up the Technisat devices
-===================================
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
1) Find out what device you have
================================
If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
"Multimedia devices" => "Customise analog and hybrid tuner modules to build"
-In this directory uncheck every driver which is activated there.
+In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
Then please activate:
2a) Main module part:
a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
-b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
+b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
+OR
c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
Notice: d.) is helpful for troubleshooting
2b) Frontend module part:
-1.) Revision 2.3:
+1.) SkyStar DVB-S Revision 2.3:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
-2.) Revision 2.6:
+2.) SkyStar DVB-S Revision 2.6:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
-3.) Revision 2.7:
+3.) SkyStar DVB-S Revision 2.7:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
-4.) Revision 2.8:
+4.) SkyStar DVB-S Revision 2.8:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
-5.) DVB-T card:
+5.) AirStar DVB-T card:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
-6.) DVB-C card:
+6.) CableStar DVB-C card:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
-7.) ATSC card 1st generation:
+7.) AirStar ATSC card 1st generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
-8.) ATSC card 2nd generation:
+8.) AirStar ATSC card 2nd generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
-c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
-Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
+9.) AirStar ATSC card 3rd generation:
+a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
Secmark, it is time to deprecate the older mechanism and start the
process of removing the old code.
Who: Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What: sysfs ui for changing p4-clockmod parameters
+When: September 2009
+Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+ e088e4c9cdb618675874becb91b2fd581ee707e6.
+ Removal is subject to fixing any remaining bugs in ACPI which may
+ cause the thermal throttling not to happen at the right time.
+Who: Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
Compression (*) http://e2compr.sourceforge.net/
Implementations for:
-Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
-Windows 95 (*) http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs
+Windows 95 (*) http://www.yipton.net/content.html#FSDEXT2
DOS client (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2 http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
-RISC OS client ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+OS/2 (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
-(*) no longer actively developed/supported (as of Apr 2001)
+(*) no longer actively developed/supported (as of Mar 2009)
programs: http://e2fsprogs.sourceforge.net/
http://ext2resize.sourceforge.net
-useful links: http://www-106.ibm.com/developerworks/linux/library/l-fs7/
- http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+useful links: http://www.ibm.com/developerworks/library/l-fs7.html
+ http://www.ibm.com/developerworks/library/l-fs8.html
Squashfs Cramfs
-Max filesystem size: 2^64 16 MiB
+Max filesystem size: 2^64 256 MiB
Max file size: ~ 2 TiB 16 MiB
Max files: unlimited unlimited
Max directories: unlimited unlimited
Addresses scanned: I2C 0x4e
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+ * Maxim MAX6648
+ Prefix: 'max6646'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
* Maxim MAX6649
Prefix: 'max6646'
Addresses scanned: I2C 0x4c
0x4c, 0x4d and 0x4e
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+ * Maxim MAX6692
+ Prefix: 'max6646'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
Author: Jean Delvare <khali@linux-fr.org>
Parameters denoted with BOOT are actually interpreted by the boot
loader, and have no meaning to the kernel directly.
Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/i386/boot.txt>.
+need or coordination with <Documentation/x86/boot.txt>.
There are also arch-specific kernel-parameters not documented here.
See for example <Documentation/x86/x86_64/boot-options.txt>.
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
- ide= [HW] (E)IDE subsystem
- Format: ide=nodma or ide=doubler
+ ide-core.nodma= [HW] (E)IDE subsystem
+ Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+ .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+ .chs .ignore_cable are additional options
See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
See Documentation/fb/modedb.txt.
vga= [BOOT,X86-32] Select a particular video mode
- See Documentation/x86/i386/boot.txt and
+ See Documentation/x86/boot.txt and
Documentation/svga.txt.
Use vga=ask for menu.
This is actually a boot loader parameter; the value is
--- /dev/null
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below. If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+ Specifies whether to load the IPv6 module, but disable all
+ its functionality. This might be used when another module
+ has a dependency on the IPv6 module being loaded, but no
+ IPv6 addresses or operations are desired.
+
+ The possible values and their effects are:
+
+ 0
+ IPv6 is enabled.
+
+ This is the default value.
+
+ 1
+ IPv6 is disabled.
+
+ No IPv6 addresses will be added to interfaces, and
+ it will not be possible to open an IPv6 socket.
+
+ A reboot is required to enable IPv6.
+
============
The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
-series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
+series of products) support iSCSI acceleration and iSCSI Direct Data Placement
(DDP) where the hardware handles the expensive byte touching operations, such
as CRC computation and verification, and direct DMA to the final host memory
destination:
the TCP segments onto the wire. It handles TCP retransmission if
needed.
- On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+ On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
segments, separating the header and data, calculating and verifying
- the digests, then forwards the header to the host. The payload data,
+ the digests, then forwarding the header to the host. The payload data,
if possible, will be directly placed into the pre-posted host DDP
buffer. Otherwise, the payload data will be sent to the host too.
sure the ip address is unique in the network.
3. edit /etc/iscsi/iscsid.conf
- The default setting for MaxRecvDataSegmentLength (131072) is too big,
- replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
- bigger than 15360 (for example 8192):
+ The default setting for MaxRecvDataSegmentLength (131072) is too big;
+ replace with a value no bigger than 15360 (for example 8192):
node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
S: Supported
DOCUMENTATION (/Documentation directory)
-P: Michael Kerrisk
-M: mtk.manpages@gmail.com
P: Randy Dunlap
M: rdunlap@xenotime.net
L: linux-doc@vger.kernel.org
ISDN SUBSYSTEM
P: Karsten Keil
-M: kkeil@suse.de
+M: isdn@linux-pingi.de
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.isdn4linux.de
T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
M: mtk.manpages@gmail.com
W: http://www.kernel.org/doc/man-pages
L: linux-man@vger.kernel.org
-S: Supported
+S: Maintained
MARVELL LIBERTAS WIRELESS DRIVER
P: Dan Williams
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
# and if the SCM is know a tag from the SCM is appended.
# The appended tag is determined by the SCM used.
#
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the kernel
+# from the copied source
ifdef CONFIG_LOCALVERSION_AUTO
- _localver-auto = $(shell $(CONFIG_SHELL) \
- $(srctree)/scripts/setlocalversion $(srctree))
+
+ifeq ($(wildcard .scmversion),)
+ _localver-auto = $(shell $(CONFIG_SHELL) \
+ $(srctree)/scripts/setlocalversion $(srctree))
+else
+ _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
localver-auto = $(LOCALVERSION)$(_localver-auto)
endif
cmd_depmod = \
if [ -r System.map -a -x $(DEPMOD) ]; then \
$(DEPMOD) -ae -F System.map \
- $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r) \
+ $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \
$(KERNELRELEASE); \
fi
unsigned int cachetype = read_cpuid_cachetype();
unsigned int arch = cpu_architecture();
- if (arch >= CPU_ARCH_ARMv7) {
- cacheid = CACHEID_VIPT_NONALIASING;
- if ((cachetype & (3 << 14)) == 1 << 14)
- cacheid |= CACHEID_ASID_TAGGED;
- } else if (arch >= CPU_ARCH_ARMv6) {
- if (cachetype & (1 << 23))
+ if (arch >= CPU_ARCH_ARMv6) {
+ if ((cachetype & (7 << 29)) == 4 << 29) {
+ /* ARMv7 register format */
+ cacheid = CACHEID_VIPT_NONALIASING;
+ if ((cachetype & (3 << 14)) == 1 << 14)
+ cacheid |= CACHEID_ASID_TAGGED;
+ } else if (cachetype & (1 << 23))
cacheid = CACHEID_VIPT_ALIASING;
else
cacheid = CACHEID_VIPT_NONALIASING;
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+ defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_4,
+ .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+ }
+};
+
+static struct platform_device cf0_device = {
+ .id = 0,
+ .dev = {
+ .platform_data = &cf0_data,
+ },
+ .resource = cf0_resources,
+ .num_resources = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_5,
+ .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+ }
+};
+
+static struct platform_device cf1_device = {
+ .id = 1,
+ .dev = {
+ .platform_data = &cf1_data,
+ },
+ .resource = cf1_resources,
+ .num_resources = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+ unsigned long ebi0_csa;
+ struct platform_device *pdev;
+
+ if (!data)
+ return;
+
+ /*
+ * assign CS4 or CS5 to SMC with Compact Flash logic support,
+ * we assume SMC timings are configured by board code,
+ * except True IDE where timings are controlled by driver
+ */
+ ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ switch (data->chipselect) {
+ case 4:
+ at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
+ ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+ cf0_data = *data;
+ pdev = &cf0_device;
+ break;
+ case 5:
+ at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */
+ ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+ cf1_data = *data;
+ pdev = &cf1_device;
+ break;
+ default:
+ printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+ data->chipselect);
+ return;
+ }
+ at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+
+ if (data->irq_pin) {
+ at91_set_gpio_input(data->irq_pin, 1);
+ at91_set_deglitch(data->irq_pin, 1);
+ }
+
+ if (data->vcc_pin)
+ /* initially off */
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* enable EBI controlled pins */
+ at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */
+ at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */
+ at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
+ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+ pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+ platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
u8 vcc_pin; /* power switching */
u8 rst_pin; /* card reset */
u8 chipselect; /* EBI Chip Select number */
+ u8 flags;
+#define AT91_CF_TRUE_IDE 0x01
+#define AT91_IDE_SWAP_A0_A2 0x02
};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
error:
- sdram_selfrefresh_disable();
target_state = PM_SUSPEND_ON;
at91_irq_resume();
at91_gpio_resume();
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
+ /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+ setup_usb(500, 8);
+
return 0;
}
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
-
- /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
- setup_usb(500, 8);
}
static __init void davinci_evm_irq_init(void)
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_GPIO,
},
+ {
+ .name = "usb",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_USB,
+ },
{
.name = "AEMIFCLK",
.rate = &commonrate,
#elif defined(CONFIG_USB_MUSB_HOST)
.mode = MUSB_HOST,
#endif
+ .clock = "usb",
.config = &musb_config,
};
}
ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
- ldp_smc911x_resources[0].end = cs_mem_base + 0xf;
+ ldp_smc911x_resources[0].end = cs_mem_base + 0xff;
udelay(100);
eth_gpio = LDP_SMC911X_GPIO;
#include <linux/serial_8250.h>
#include <linux/ata_platform.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <asm/elf.h>
#include <asm/mach-types.h>
&pata_device,
};
+static struct i2c_board_info i2c_rtc = {
+ I2C_BOARD_INFO("pcf8583", 0x50)
+};
+
static int __init rpc_init(void)
{
+ i2c_register_board_info(0, &i2c_rtc, 1);
return platform_add_devices(devs, ARRAY_SIZE(devs));
}
#ifdef CONFIG_CPU_32v6K
clrex
#else
- strex r0, r1, [sp] @ Clear the exclusive monitor
+ sub r1, sp, #4 @ Get unused stack location
+ strex r0, r1, [r1] @ Clear the exclusive monitor
#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
u32 mask;
mask = __raw_readl(S3C64XX_EINT0MASK);
- mask |= eint_irq_to_bit(irq);
+ mask &= ~eint_irq_to_bit(irq);
__raw_writel(mask, S3C64XX_EINT0MASK);
}
config PM_WAKEUP_BY_GPIO
bool "Allow Wakeup from Standby by GPIO"
+ depends on PM && !BF54x
config PM_WAKEUP_GPIO_NUMBER
int "GPIO number"
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+ (all processors, except ADSP-BF549). This option sets
+ the general-purpose wake-up enable (GPWE) control bit to enable
+ wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+ On ADSP-BF549 this option enables the the same functionality on the
+ /MRXON pin also PH7.
+
endmenu
menu "CPU Frequency scaling"
config HAVE_ARCH_KGDB
def_bool y
-config KGDB_TESTCASE
- tristate "KGDB: for test case in expect"
- default n
- help
- This is a kgdb test case for automated testing.
-
config DEBUG_VERBOSE
bool "Verbose fault messages"
default y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan 9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
# CONFIG_DEBUG_HWERR is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
# CONFIG_MPU is not set
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
#
include include/asm-generic/Kbuild.asm
+unifdef-y += bfin_sport.h
unifdef-y += fixed_code.h
/*
- * File: include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author: Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
*
- * Created: Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __BFIN_SPORT_H__
#define NORM_FORMAT 0x0
#define ALAW_FORMAT 0x2
#define ULAW_FORMAT 0x3
-struct sport_register;
/* Function driver which use sport must initialize the structure */
struct sport_config {
- /*TDM (multichannels), I2S or other mode */
+ /* TDM (multichannels), I2S or other mode */
unsigned int mode:3;
/* if TDM mode is selected, channels must be set */
int serial_clk;
int fsync_clk;
- unsigned int data_format:2; /*Normal, u-law or a-law */
+ unsigned int data_format:2; /* Normal, u-law or a-law */
int word_len; /* How length of the word in bits, 3-32 bits */
int dma_enabled;
};
+/* Userspace interface */
+#define SPORT_IOC_MAGIC 'P'
+#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
struct sport_register {
unsigned short tcr1;
unsigned short reserved0;
unsigned long mrcs3;
};
-#define SPORT_IOC_MAGIC 'P'
-#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
-
struct sport_dev {
struct cdev cdev; /* Char device structure */
struct sport_config config;
};
+#endif
+
#define SPORT_TCR1 0
#define SPORT_TCR2 1
#define SPORT_TCLKDIV 2
#define SPORT_MRCS2 22
#define SPORT_MRCS3 23
-#endif /*__BFIN_SPORT_H__*/
+#endif
#include <asm/atomic.h>
#include <asm/traps.h>
-#define IPIPE_ARCH_STRING "1.8-00"
+#define IPIPE_ARCH_STRING "1.9-00"
#define IPIPE_MAJOR_NUMBER 1
-#define IPIPE_MINOR_NUMBER 8
+#define IPIPE_MINOR_NUMBER 9
#define IPIPE_PATCH_NUMBER 0
#ifdef CONFIG_SMP
"%2 = CYCLES2\n" \
"CC = %2 == %0\n" \
"if ! CC jump 1b\n" \
- : "=r" (((unsigned long *)&t)[1]), \
- "=r" (((unsigned long *)&t)[0]), \
- "=r" (__cy2) \
+ : "=d,a" (((unsigned long *)&t)[1]), \
+ "=d,a" (((unsigned long *)&t)[0]), \
+ "=d,a" (__cy2) \
: /*no input*/ : "CC"); \
t; \
})
#define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq))
-#define __ipipe_lock_root() \
- set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+ return 1;
+}
-#define __ipipe_unlock_root() \
- clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+ set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+ clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
void __ipipe_enable_pipeline(void);
#define __ipipe_hook_critical_ipi(ipd) do { } while (0)
-#define __ipipe_sync_pipeline(syncmask) \
- do { \
- struct ipipe_domain *ipd = ipipe_current_domain; \
- if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
- __ipipe_sync_stage(syncmask); \
- } while (0)
+#define __ipipe_sync_pipeline ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
int __ipipe_get_irq_priority(unsigned irq);
-int __ipipe_get_irqthread_priority(unsigned irq);
-
void __ipipe_stall_root_raw(void);
void __ipipe_unstall_root_raw(void);
void __ipipe_serial_debug(const char *fmt, ...);
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
extern unsigned long __ipipe_core_clock;
#define __ipipe_run_irqtail() /* Must be a macro */ \
do { \
- asmlinkage void __ipipe_call_irqtail(void); \
unsigned long __pending; \
- CSYNC(); \
+ CSYNC(); \
__pending = bfin_read_IPEND(); \
if (__pending & 0x8000) { \
__pending &= ~0x8010; \
if (__pending && (__pending & (__pending - 1)) == 0) \
- __ipipe_call_irqtail(); \
+ __ipipe_call_irqtail(__ipipe_irq_tail_hook); \
} \
} while (0)
#define __ipipe_run_isr(ipd, irq) \
do { \
if (ipd == ipipe_root_domain) { \
- /* \
- * Note: the I-pipe implements a threaded interrupt model on \
- * this arch for Linux external IRQs. The interrupt handler we \
- * call here only wakes up the associated IRQ thread. \
- */ \
- if (ipipe_virtual_irq_p(irq)) { \
- /* No irqtail here; virtual interrupts have no effect \
- on IPEND so there is no need for processing \
- deferral. */ \
- local_irq_enable_nohead(ipd); \
+ local_irq_enable_hw(); \
+ if (ipipe_virtual_irq_p(irq)) \
ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
- local_irq_disable_nohead(ipd); \
- } else \
- /* \
- * No need to run the irqtail here either; \
- * we can't be preempted by hw IRQs, so \
- * non-Linux IRQs cannot stack over the short \
- * thread wakeup code. Which in turn means \
- * that no irqtail condition could be pending \
- * for domains above Linux in the pipeline. \
- */ \
+ else \
ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+ local_irq_disable_hw(); \
} else { \
__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
local_irq_enable_nohead(ipd); \
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
-#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR IRQ_CORETMR
+#define IRQ_PRIOTMR IRQ_CORETMR
+#else
#define IRQ_SYSTMR IRQ_TIMER0
#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
+#endif
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq) CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
- (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
- (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
- -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
- (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
- (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
- -1)
+#ifdef CONFIG_BF561
#define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val)
#define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS()
#elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
- (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
- (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
- (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
- -1)
#define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val)
#define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
#endif
#define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0)
#endif /* !CONFIG_IPIPE */
+#define ipipe_update_tick_evtdev(evtdev) do { } while (0)
+
#endif /* !__ASM_BLACKFIN_IPIPE_H */
/* -*- linux-c -*-
- * include/asm-blackfin/_baseipipe.h
+ * include/asm-blackfin/ipipe_base.h
*
* Copyright (C) 2007 Philippe Gerum.
*
#define IPIPE_NR_XIRQS NR_IRQS
#define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */
-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG 15
+#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK)
/* Blackfin traps -- i.e. exception vector numbers */
#define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */
#ifndef __ASSEMBLY__
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
static inline void __ipipe_stall_root(void)
#define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags))
#define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x)
-#define local_save_flags(x) \
- do { \
- (x) = __ipipe_test_root() ? \
+#define local_save_flags(x) \
+ do { \
+ (x) = __ipipe_test_root() ? \
__all_masked_irq_flags : bfin_irq_flags; \
+ barrier(); \
} while (0)
-#define local_irq_save(x) \
- do { \
- (x) = __ipipe_test_and_stall_root(); \
+#define local_irq_save(x) \
+ do { \
+ (x) = __ipipe_test_and_stall_root() ? \
+ __all_masked_irq_flags : bfin_irq_flags; \
+ barrier(); \
+ } while (0)
+
+static inline void local_irq_restore(unsigned long x)
+{
+ barrier();
+ __ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable() \
+ do { \
+ __ipipe_stall_root(); \
+ barrier(); \
} while (0)
-#define local_irq_restore(x) __ipipe_restore_root(x)
-#define local_irq_disable() __ipipe_stall_root()
-#define local_irq_enable() __ipipe_unstall_root()
+static inline void local_irq_enable(void)
+{
+ barrier();
+ __ipipe_unstall_root();
+}
+
#define irqs_disabled() __ipipe_test_root()
#define local_save_flags_hw(x) \
#define TIF_MEMDIE 4
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_FREEZE 6 /* is freezing for suspend */
+#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
obj-y += time.o
endif
-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
i_d = i_i = 0;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
/* Set up the zero page. */
d_tbl[i_d].addr = 0;
d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+ i_tbl[i_i].addr = 0;
+ i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
/* Cover kernel memory with 4M pages. */
addr = 0;
#include <asm/atomic.h>
#include <asm/io.h>
-static int create_irq_threads;
-
DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
static void __ipipe_no_irqtail(void);
*/
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
{
+ struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain, *next_domain;
struct list_head *head, *pos;
int m_ack, s = -1;
* interrupt.
*/
m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
this_domain = ipipe_current_domain;
if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
next_domain = list_entry(head, struct ipipe_domain, p_link);
if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
- next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
- if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
- s = __test_and_set_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
+ next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+ s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
__ipipe_dispatch_wired(next_domain, irq);
- goto finalize;
- return;
+ goto out;
}
}
/* Ack the interrupt. */
pos = head;
-
while (pos != &__ipipe_pipeline) {
next_domain = list_entry(pos, struct ipipe_domain, p_link);
- /*
- * For each domain handling the incoming IRQ, mark it
- * as pending in its log.
- */
if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
- /*
- * Domains that handle this IRQ are polled for
- * acknowledging it by decreasing priority
- * order. The interrupt must be made pending
- * _first_ in the domain's status flags before
- * the PIC is unlocked.
- */
__ipipe_set_irq_pending(next_domain, irq);
-
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
- next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+ next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
m_ack = 1;
}
}
-
- /*
- * If the domain does not want the IRQ to be passed
- * down the interrupt pipe, exit the loop now.
- */
if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
break;
-
pos = next_domain->p_link.next;
}
* immediately to the current domain if the interrupt has been
* marked as 'sticky'. This search does not go beyond the
* current domain in the pipeline. We also enforce the
- * additional root stage lock (blackfin-specific). */
+ * additional root stage lock (blackfin-specific).
+ */
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+ s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
- if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
- s = __test_and_set_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
-finalize:
+ /*
+ * If the interrupt preempted the head domain, then do not
+ * even try to walk the pipeline, unless an interrupt is
+ * pending for it.
+ */
+ if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+ ipipe_head_cpudom_var(irqpend_himask) == 0)
+ goto out;
__ipipe_walk_pipeline(head);
-
+out:
if (!s)
- __clear_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
+ __clear_bit(IPIPE_STALL_FLAG, &p->status);
}
int __ipipe_check_root(void)
void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
desc->depth = 0;
void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
if (ipd != &ipipe_root &&
{
unsigned long flags;
- /* We need to run the IRQ tail hook whenever we don't
+ /*
+ * We need to run the IRQ tail hook whenever we don't
* propagate a syscall to higher domains, because we know that
* important operations might be pending there (e.g. Xenomai
- * deferred rescheduling). */
+ * deferred rescheduling).
+ */
- if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+ if (regs->orig_p0 < NR_syscalls) {
void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
hook();
- return 0;
+ if ((current->flags & PF_EVNOTIFY) == 0)
+ return 0;
}
/*
{
unsigned long flags;
+#ifdef CONFIG_IPIPE_DEBUG
if (irq >= IPIPE_NR_IRQS ||
(ipipe_virtual_irq_p(irq)
&& !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
return -EINVAL;
+#endif
local_irq_save_hw(flags);
-
__ipipe_handle_irq(irq, NULL);
-
local_irq_restore_hw(flags);
return 1;
}
-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
{
- struct irq_desc *desc = __desc;
- unsigned irq = desc - irq_desc;
- int thrprio = desc->thr_prio;
- int thrmask = 1 << thrprio;
- int cpu = smp_processor_id();
- cpumask_t cpumask;
-
- sigfillset(¤t->blocked);
- current->flags |= PF_NOFREEZE;
- cpumask = cpumask_of_cpu(cpu);
- set_cpus_allowed(current, cpumask);
- ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
-
- while (!kthread_should_stop()) {
- local_irq_disable();
- if (!(desc->status & IRQ_SCHEDULED)) {
- set_current_state(TASK_INTERRUPTIBLE);
-resched:
- local_irq_enable();
- schedule();
- local_irq_disable();
- }
- __set_current_state(TASK_RUNNING);
- /*
- * If higher priority interrupt servers are ready to
- * run, reschedule immediately. We need this for the
- * GPIO demux IRQ handler to unmask the interrupt line
- * _last_, after all GPIO IRQs have run.
- */
- if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
- goto resched;
- if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
- per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
- desc->status &= ~IRQ_SCHEDULED;
- desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
- local_irq_enable();
- }
- __set_current_state(TASK_RUNNING);
- return 0;
-}
+ unsigned long flags;
-static void kick_irqd(unsigned irq, void *cookie)
-{
- struct irq_desc *desc = irq_desc + irq;
- int thrprio = desc->thr_prio;
- int thrmask = 1 << thrprio;
- int cpu = smp_processor_id();
-
- if (!(desc->status & IRQ_SCHEDULED)) {
- desc->status |= IRQ_SCHEDULED;
- per_cpu(pending_irqthread_mask, cpu) |= thrmask;
- ++per_cpu(pending_irq_count[thrprio], cpu);
- wake_up_process(desc->thread);
- }
-}
+ BUG_ON(irqs_disabled());
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
- if (desc->thread || !create_irq_threads)
- return 0;
-
- desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
- if (desc->thread == NULL) {
- printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
- return -ENOMEM;
- }
+ local_irq_save_hw(flags);
- wake_up_process(desc->thread);
+ clear_thread_flag(TIF_IRQ_SYNC);
- desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
- ipipe_root_domain->irqs[irq].handler = &kick_irqd;
+ if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+ __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
- return 0;
+ local_irq_restore_hw(flags);
}
-void __init ipipe_init_irq_threads(void)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
{
- unsigned irq;
- struct irq_desc *desc;
-
- create_irq_threads = 1;
+ struct ipipe_domain *ipd = ipipe_current_domain;
- for (irq = 0; irq < NR_IRQS; irq++) {
- desc = irq_desc + irq;
- if (desc->action != NULL ||
- (desc->status & IRQ_NOREQUEST) != 0)
- ipipe_start_irq_thread(irq, desc);
+ if (ipd == ipipe_root_domain) {
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+ return;
}
+
+ __ipipe_sync_stage(syncmask);
}
EXPORT_SYMBOL(show_stack);
#endif
generic_handle_irq(irq);
-#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */
- /* If we're the only interrupt running (ignoring IRQ15 which is for
- syscalls), lower our priority to IRQ14 so that softirqs run at
- that level. If there's another, lower-level interrupt, irq_exit
- will defer softirqs to that. */
+#ifndef CONFIG_IPIPE
+ /*
+ * If we're the only interrupt running (ignoring IRQ15 which
+ * is for syscalls), lower our priority to IRQ14 so that
+ * softirqs run at that level. If there's another,
+ * lower-level interrupt, irq_exit will defer softirqs to
+ * that. If the interrupt pipeline is enabled, we are already
+ * running at IRQ14 priority, so we don't need this code.
+ */
CSYNC();
pending = bfin_read_IPEND() & ~0x8000;
other_ints = pending & (pending - 1);
static char cmdline[256];
static unsigned long len;
+#ifndef CONFIG_SMP
static int num1 __attribute__((l1_data));
void kgdb_l1_test(void) __attribute__((l1_text));
printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
return ;
}
+#endif
+
#if L2_LENGTH
static int num2 __attribute__((l2));
static int test_proc_output(char *buf)
{
kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
kgdb_l1_test();
- #if L2_LENGTH
+#endif
+#if L2_LENGTH
kgdb_l2_test();
- #endif
+#endif
return 0;
}
#include <asm/asm-offsets.h>
#include <asm/dma.h>
#include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
#include <asm/mem_map.h>
#define TEXT_OFFSET 0
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(tmp) <= FIXED_CODE_END) {
- memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+ copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
} else
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(data) <= FIXED_CODE_END) {
- memcpy((void *)(addr), &data, sizeof(data));
+ copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
copied = sizeof(data);
} else
CPU, bfin_revid());
}
+ /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+ if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+ panic("You can't run on this processor due to 05000448\n");
+
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
- "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+ "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
icache_size, dcache_size,
#if defined CONFIG_BFIN_WB
- "wb"
+ "-wb"
#elif defined CONFIG_BFIN_WT
- "wt"
+ "-wt"
#endif
"", 0);
write_seqlock(&xtime_lock);
#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+ /*
+ * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+ * enabled.
+ */
if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
#endif
do_timer(1);
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
-#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
static struct dsa_platform_data ksz8893m_switch_data = {
.dev.platform_data = &ksz8893m_switch_data,
};
#endif
+#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
};
#endif
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
/* SPI SWITCH CHIP */
.bits_per_word = 8,
};
#endif
+#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
{
.mode = SPI_MODE_3,
},
#endif
+#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
-#endif
-
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
&ksz8893m_switch_device,
#endif
+#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
* File: include/asm-blackfin/mach-bf518/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - ????
+ * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define ANOMALY_05000122 (1)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000443 (1)
/* Incorrect L1 Instruction Bank B Memory Map Location */
#define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (0)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
* File: include/asm-blackfin/mach-bf527/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
help
Core support for IP04/IP04 open hardware IP-PBX.
-config GENERIC_BF533_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
# arch/blackfin/mach-bf533/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN532_IP0X) += ip0x.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
+++ /dev/null
-/*
- * File: arch/blackfin/mach-bf533/generic_board.c
- * Based on: arch/blackfin/mach-bf533/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created: 2005
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
- .name = "rtc-bfin",
- .id = -1,
-};
-#endif
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .start = 0x20300300,
- .end = 0x20300300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PROG_INTB,
- .end = IRQ_PROG_INTB,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
- &rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
/*
* CPOL (Clock Polarity)
* 0 - Active high SCK
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 2,
.bus_num = 1,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
},
#endif
};
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART_TX,
CH_UART_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
help
Board supply package for CSP Minotaur
-config GENERIC_BF537_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
# arch/blackfin/mach-bf537/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 1,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
+++ /dev/null
-/*
- * File: arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
- [0] = {
- .start = 0x203C0000,
- .end = 0x203C0000 + 0x000fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct isp1760_platform_data isp1760_priv = {
- .is_isp1761 = 0,
- .port1_disable = 0,
- .bus_width_16 = 1,
- .port1_otg = 0,
- .analog_oc = 0,
- .dack_polarity_high = 0,
- .dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1760_priv,
- },
- .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
- .resource = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
- {
- .start = 0x20310000, /* IO PORT */
- .end = 0x20312000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20311000, /* Attribute Memory */
- .end = 0x20311FFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PF4,
- .end = IRQ_PF4,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- }, {
- .start = 6, /* Card Detect PF6 */
- .end = 6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
- .name = "bfin_cf_pcmcia",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
- .resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
- .name = "rtc-bfin",
- .id = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .name = "smc91x-regs",
- .start = 0x20300300,
- .end = 0x20300300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
-
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
- [0] = {
- .start = 0x203FB800,
- .end = 0x203FB800 + 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x203FB800 + 4,
- .end = 0x203FB800 + 5,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_PF9,
- .end = IRQ_PF9,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
- },
-};
-
-static struct platform_device dm9000_device = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm9000_resources),
- .resource = dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
- {
- .start = 0x20340000,
- .end = 0x20340000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20340004,
- .end = 0x20340004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_SL811_BFIN_IRQ,
- .end = CONFIG_USB_SL811_BFIN_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
- gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
- gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
- .potpg = 10,
- .power = 250, /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
- .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
- .name = "sl811-hcd",
- .id = 0,
- .dev = {
- .platform_data = &sl811_priv,
- },
- .num_resources = ARRAY_SIZE(sl811_hcd_resources),
- .resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
- {
- .start = 0x20360000,
- .end = 0x20360000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20360004,
- .end = 0x20360004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
- .sel15Kres = 1,
- .clknotstop = 0,
- .oc_enable = 0,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_connected = 0,
- .no_power_switching = 1,
- .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
- .name = "isp1362-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1362_priv,
- },
- .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
- .resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
- .name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
- .name = "bfin_mac",
- .dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
- {
- .start = 0x20300000,
- .end = 0x20300000 + 0x100,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device net2272_bfin_device = {
- .name = "net2272",
- .id = -1,
- .num_resources = ARRAY_SIZE(net2272_bfin_resources),
- .resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
- {
- .name = "bootloader(spi)",
- .size = 0x00020000,
- .offset = 0,
- .mask_flags = MTD_CAP_ROM
- }, {
- .name = "linux kernel(spi)",
- .size = 0xe0000,
- .offset = 0x20000
- }, {
- .name = "file system(spi)",
- .size = 0x700000,
- .offset = 0x00100000,
- }
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
- .name = "m25p80",
- .parts = bfin_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
- .enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .enable_dma = 1, /* use dma transfer with this chip*/
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
- || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
- .ctl_reg = 0x4, /* send zero */
- .enable_dma = 0,
- .bits_per_word = 8,
- .cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
- .model = 7877,
- .vref_delay_usecs = 50, /* internal, no capacitor */
- .x_plate_ohms = 419,
- .y_plate_ohms = 486,
- .pressure_max = 1000,
- .pressure_min = 0,
- .stopacq_polarity = 1,
- .first_conversion_delay = 3,
- .acquisition_time = 1,
- .averaging = 1,
- .pen_down_acc_interval = 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
- {
- /* the modalias must be the same as spi device driver name */
- .modalias = "m25p80", /* Name of spi_driver for this device */
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
- .platform_data = &bfin_spi_flash_data,
- .controller_data = &spi_flash_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
- {
- .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
- .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. */
- .platform_data = NULL, /* No spi_driver specific config */
- .controller_data = &spi_adc_chip_info,
- },
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
- || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
- {
- .modalias = "ad1836-spi",
- .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
- .controller_data = &ad1836_spi_chip_info,
- },
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
- {
- .modalias = "ad9960-spi",
- .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 1,
- .controller_data = &ad9960_spi_chip_info,
- },
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-#if defined(CONFIG_PBX)
- {
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 8 - CONFIG_J11_JUMPER,
- .controller_data = &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 8 - CONFIG_J19_JUMPER,
- .controller_data = &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
- {
- .modalias = "ad7877",
- .platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PF6,
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 1,
- .controller_data = &spi_ad7877_chip_info,
- },
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
- .num_chipselect = 8,
- .enable_dma = 1, /* master has the ability to do dma transfer */
- .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
- [0] = {
- .start = SPI0_REGBASE,
- .end = SPI0_REGBASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = CH_SPI,
- .end = CH_SPI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_spi0_device = {
- .name = "bfin-spi",
- .id = 0, /* Bus number */
- .num_resources = ARRAY_SIZE(bfin_spi0_resource),
- .resource = bfin_spi0_resource,
- .dev = {
- .platform_data = &bfin_spi0_info, /* Passed to driver */
- },
-};
-#endif /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device bfin_uart_device = {
- .name = "bfin-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
- {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART1_RX,
- .end = CH_UART1_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir1_device = {
- .name = "bfin_sir",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_sir1_resources),
- .resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
- [0] = {
- .start = TWI0_REGBASE,
- .end = TWI0_REGBASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TWI,
- .end = IRQ_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c_bfin_twi_device = {
- .name = "i2c-bfin-twi",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_twi0_resource),
- .resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
- .name = "bfin-sport-uart",
- .id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
- .name = "bfin-sport-uart",
- .id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
- &bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
- &rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
- &sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
- &isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
- &dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
- &bfin_mii_bus,
- &bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
- &net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
- &bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
- &bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
- &bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
- &i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
- &bfin_sport0_uart_device,
- &bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
- return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
- /* workaround reboot hang when booting from SPI */
- if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
- random_ether_addr(addr);
- printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
* File: include/asm-blackfin/mach-bf538/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000198 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000263 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
/* Software System Reset Corrupts PLL_LOCKCNT Register */
#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
# define CONFIG_UART0_RTS_PIN -1
# endif
-# ifndef CONFIG_UART1_CTS_PIN
-# define CONFIG_UART1_CTS_PIN -1
+# ifndef CONFIG_UART2_CTS_PIN
+# define CONFIG_UART2_CTS_PIN -1
# endif
-# ifndef CONFIG_UART1_RTS_PIN
-# define CONFIG_UART1_RTS_PIN -1
+# ifndef CONFIG_UART2_RTS_PIN
+# define CONFIG_UART2_RTS_PIN -1
# endif
#endif
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART1_TX,
CH_UART1_RX,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ 0,
+ 0,
#endif
},
#endif
CH_UART2_TX,
CH_UART2_RX,
#endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART2_CTS_PIN,
CONFIG_UART2_RTS_PIN,
#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART3_TX,
CH_UART3_RX,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ 0,
+ 0,
#endif
},
#endif
#define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */
#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */
#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
+#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
#define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */
#define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */
#define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */
#define IRQ_UART2_ERR IRQ_UART2_ERROR
#define IRQ_CAN0_ERR IRQ_CAN0_ERROR
#define IRQ_MXVR_ERR IRQ_MXVR_ERROR
-#define IRQ_EPP1_ERR IRQ_EPP1_ERROR
-#define IRQ_EPP2_ERR IRQ_EPP2_ERROR
+#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR
#define IRQ_UART3_ERR IRQ_UART3_ERROR
#define IRQ_HOST_ERR IRQ_HOST_ERROR
#define IRQ_PIXC_ERR IRQ_PIXC_ERROR
help
CM-BF561 support for EVAL- and DEV-Board.
-config GENERIC_BF561_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
# arch/blackfin/mach-bf561/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
+++ /dev/null
-/*
- * File: arch/blackfin/mach-bf561/generic_board.c
- * Based on: arch/blackfin/mach-bf533/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .start = 0x2C010300,
- .end = 0x2C010300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PROG_INTB,
- .end = IRQ_PROG_INTB,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF9,
- .end = IRQ_PF9,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- return platform_add_devices(generic_board_devices,
- ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
CH_UART_TX,
CH_UART_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
#if (CONFIG_BOOT_LOAD & 0x3)
# error "The kernel load address must be 4 byte aligned"
#endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
/* Invalidate all instruction cache lines assocoiated with this memory area */
ENTRY(_blackfin_icache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+ P0 = R0;
+ IFLUSH[P0];
do_flush IFLUSH, , nop
ENDPROC(_blackfin_icache_flush_range)
/* Flush all cache lines assocoiated with this area of memory. */
ENTRY(_blackfin_icache_dcache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+ P0 = R0;
+ IFLUSH[P0];
do_flush FLUSH, IFLUSH
ENDPROC(_blackfin_icache_dcache_flush_range)
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
- (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+ (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
__attribute__((l1_text))
static void do_sync(void)
#endif
#ifdef PINT0_ASSIGN
+ PM_SYS_PUSH(PINT0_MASK_SET)
+ PM_SYS_PUSH(PINT1_MASK_SET)
+ PM_SYS_PUSH(PINT2_MASK_SET)
+ PM_SYS_PUSH(PINT3_MASK_SET)
PM_SYS_PUSH(PINT0_ASSIGN)
PM_SYS_PUSH(PINT1_ASSIGN)
PM_SYS_PUSH(PINT2_ASSIGN)
PM_SYS_PUSH(PINT3_ASSIGN)
+ PM_SYS_PUSH(PINT0_INVERT_SET)
+ PM_SYS_PUSH(PINT1_INVERT_SET)
+ PM_SYS_PUSH(PINT2_INVERT_SET)
+ PM_SYS_PUSH(PINT3_INVERT_SET)
+ PM_SYS_PUSH(PINT0_EDGE_SET)
+ PM_SYS_PUSH(PINT1_EDGE_SET)
+ PM_SYS_PUSH(PINT2_EDGE_SET)
+ PM_SYS_PUSH(PINT3_EDGE_SET)
#endif
PM_SYS_PUSH(EBIU_AMBCTL0)
PM_SYS_POP(EBIU_AMBCTL0)
#ifdef PINT0_ASSIGN
+ PM_SYS_POP(PINT3_EDGE_SET)
+ PM_SYS_POP(PINT2_EDGE_SET)
+ PM_SYS_POP(PINT1_EDGE_SET)
+ PM_SYS_POP(PINT0_EDGE_SET)
+ PM_SYS_POP(PINT3_INVERT_SET)
+ PM_SYS_POP(PINT2_INVERT_SET)
+ PM_SYS_POP(PINT1_INVERT_SET)
+ PM_SYS_POP(PINT0_INVERT_SET)
PM_SYS_POP(PINT3_ASSIGN)
PM_SYS_POP(PINT2_ASSIGN)
PM_SYS_POP(PINT1_ASSIGN)
PM_SYS_POP(PINT0_ASSIGN)
+ PM_SYS_POP(PINT3_MASK_SET)
+ PM_SYS_POP(PINT2_MASK_SET)
+ PM_SYS_POP(PINT1_MASK_SET)
+ PM_SYS_POP(PINT0_MASK_SET)
#endif
#ifdef SICA_IWR1
p2 = [p2];
[p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+ r0 = sp;
+ SP += -12;
+ call ___ipipe_syscall_root;
+ SP += 12;
+ cc = r0 == 1;
+ if cc jump .Lsyscall_really_exit;
+ cc = r0 == -1;
+ if cc jump .Lresume_userspace;
+ r3 = [sp + PT_R3];
+ r4 = [sp + PT_R4];
+ p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
/* Check the System Call */
r7 = __NR_syscall;
r7 = r7 & r4;
.Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+ cc = BITTST(r7, TIF_IRQ_SYNC);
+ if !cc jump .Lsyscall_no_irqsync;
+ [--sp] = reti;
+ r0 = [sp++];
+ SP += -12;
+ call ___ipipe_sync_root;
+ SP += 12;
+ jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
cc = BITTST(r7, TIF_NEED_RESCHED);
if !cc jump .Lsyscall_sigpending;
.Lsyscall_really_exit:
r5 = [sp + PT_RESERVED];
rets = r5;
+#ifdef CONFIG_IPIPE
+ [--sp] = reti;
+ r5 = [sp++];
+#endif /* CONFIG_IPIPE */
rts;
ENDPROC(_system_call)
ENDPROC(_resume)
ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+ [--sp] = rets;
+ SP += -12;
+ call ___ipipe_check_root
+ SP += 12
+ rets = [sp++];
+ cc = r0 == 0;
+ if cc jump 4f; /* not on behalf of Linux, get out */
+#endif /* CONFIG_IPIPE */
p2.l = lo(IPEND);
p2.h = hi(IPEND);
rts;
ENDPROC(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+
+_sync_root_irqs:
+ [--sp] = reti; /* Reenable interrupts */
+ r0 = [sp++];
+ jump.l ___ipipe_sync_root
+
+_resume_kernel_from_int:
+ r0.l = _sync_root_irqs
+ r0.h = _sync_root_irqs
+ [--sp] = rets;
+ [--sp] = ( r7:4, p5:3 );
+ SP += -12;
+ call ___ipipe_call_irqtail
+ SP += 12;
+ ( r7:4, p5:3 ) = [sp++];
+ rets = [sp++];
+ rts
+#else
+#define _resume_kernel_from_int 2f
+#endif
+
ENTRY(_return_from_int)
/* If someone else already raised IRQ 15, do nothing. */
csync;
r1 = r0 - r1;
r2 = r0 & r1;
cc = r2 == 0;
- if !cc jump 2f;
+ if !cc jump _resume_kernel_from_int;
/* Lower the interrupt level to 15. */
p0.l = lo(EVT15);
#ifdef CONFIG_IPIPE
ENTRY(___ipipe_call_irqtail)
+ p0 = r0;
r0.l = 1f;
r0.h = 1f;
reti = r0;
1:
[--sp] = rets;
[--sp] = ( r7:4, p5:3 );
- p0.l = ___ipipe_irq_tail_hook;
- p0.h = ___ipipe_irq_tail_hook;
- p0 = [p0];
sp += -12;
call (p0);
sp += 12;
p0.h = hi(EVT14);
[p0] = r0;
csync;
- r0 = 0x401f;
+ r0 = 0x401f (z);
sti r0;
raise 14;
[--sp] = reti; /* IRQs on. */
p0.h = _bfin_irq_flags;
r0 = [p0];
sti r0;
-#if 0 /* FIXME: this actually raises scheduling latencies */
- /* Reenable interrupts */
- [--sp] = reti;
- r0 = [sp++];
-#endif
rts;
ENDPROC(___ipipe_call_irqtail)
+
#endif /* CONFIG_IPIPE */
static void bfin_internal_mask_irq(unsigned int irq)
{
+ unsigned long flags;
+
#ifdef CONFIG_BF53x
+ local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
~(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
+ local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
~(1 << mask_bit));
#endif
#endif
+ local_irq_restore_hw(flags);
}
static void bfin_internal_unmask_irq(unsigned int irq)
{
+ unsigned long flags;
+
#ifdef CONFIG_BF53x
+ local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
+ local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
(1 << mask_bit));
#endif
#endif
+ local_irq_restore_hw(flags);
}
#ifdef CONFIG_PM
static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
{
#ifdef CONFIG_IPIPE
- _set_irq_handler(irq, handle_edge_irq);
+ _set_irq_handler(irq, handle_level_irq);
#else
struct irq_desc *desc = irq_desc + irq;
/* May not call generic set_irq_handler() due to spinlock
#endif
default:
#ifdef CONFIG_IPIPE
- /*
- * We want internal interrupt sources to be masked, because
- * ISRs may trigger interrupts recursively (e.g. DMA), but
- * interrupts are _not_ masked at CPU level. So let's handle
- * them as level interrupts.
- */
- set_irq_handler(irq, handle_level_irq);
+ /*
+ * We want internal interrupt sources to be
+ * masked, because ISRs may trigger interrupts
+ * recursively (e.g. DMA), but interrupts are
+ * _not_ masked at CPU level. So let's handle
+ * most of them as level interrupts, except
+ * the timer interrupt which is special.
+ */
+ if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+ set_irq_handler(irq, handle_simple_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
#else /* !CONFIG_IPIPE */
set_irq_handler(irq, handle_simple_irq);
#endif /* !CONFIG_IPIPE */
#ifdef CONFIG_IPIPE
for (irq = 0; irq < NR_IRQS; irq++) {
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
desc->ic_prio = __ipipe_get_irq_priority(irq);
- desc->thr_prio = __ipipe_get_irqthread_priority(irq);
}
#endif /* CONFIG_IPIPE */
return IVG15;
}
-int __ipipe_get_irqthread_priority(unsigned irq)
-{
- int ient, prio;
- int demux_irq;
-
- /* The returned priority value is rescaled to [0..IVG13+1]
- * with 0 being the lowest effective priority level. */
-
- if (irq <= IRQ_CORETMR)
- return IVG13 - irq + 1;
-
- /* GPIO IRQs are given the priority of the demux
- * interrupt. */
- if (IS_GPIOIRQ(irq)) {
-#if defined(CONFIG_BF54x)
- u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
- demux_irq = (bank == 0 ? IRQ_PINT0 :
- bank == 1 ? IRQ_PINT1 :
- bank == 2 ? IRQ_PINT2 :
- IRQ_PINT3);
-#elif defined(CONFIG_BF561)
- demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
- irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
- IRQ_PROG0_INTA);
-#elif defined(CONFIG_BF52x)
- demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
- irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
- IRQ_PORTF_INTA);
-#else
- demux_irq = irq;
-#endif
- return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
- }
-
- /* The GPIO demux interrupt is given a lower priority
- * than the GPIO IRQs, so that its threaded handler
- * unmasks the interrupt line after the decoded IRQs
- * have been processed. */
- prio = PRIO_GPIODEMUX(irq);
- /* demux irq? */
- if (prio != -1)
- return IVG13 - prio;
-
- for (ient = 0; ient < NR_PERI_INTS; ient++) {
- struct ivgx *ivg = ivg_table + ient;
- if (ivg->irqno == irq) {
- for (prio = 0; prio <= IVG13-IVG7; prio++) {
- if (ivg7_13[prio].ifirst <= ivg &&
- ivg7_13[prio].istop > ivg)
- return IVG7 - prio;
- }
- }
- }
-
- return 0;
-}
-
/* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
#ifdef CONFIG_DO_IRQ_L1
__attribute__((l1_text))
#endif
asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
{
+ struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+ struct ipipe_domain *this_domain = ipipe_current_domain;
struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
- int irq;
+ int irq, s;
if (likely(vec == EVT_IVTMR_P)) {
irq = IRQ_CORETMR;
- goto handle_irq;
+ goto core_tick;
}
SSYNC();
irq = ivg->irqno;
if (irq == IRQ_SYSTMR) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#else
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
/* This is basically what we need from the register frame. */
__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
- if (!ipipe_root_domain_p)
- __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
- else
+ if (this_domain != ipipe_root_domain)
__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+ else
+ __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
}
-handle_irq:
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#endif
+ if (this_domain == ipipe_root_domain) {
+ s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+ barrier();
+ }
ipipe_trace_irq_entry(irq);
__ipipe_handle_irq(irq, regs);
- ipipe_trace_irq_exit(irq);
+ ipipe_trace_irq_exit(irq);
- if (ipipe_root_domain_p)
- return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+ if (this_domain == ipipe_root_domain) {
+ set_thread_flag(TIF_IRQ_SYNC);
+ if (!s) {
+ __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+ return !test_bit(IPIPE_STALL_FLAG, &p->status);
+ }
+ }
return 0;
}
kfree(msg);
break;
case BFIN_IPI_CALL_FUNC:
+ spin_unlock(&msg_queue->lock);
ipi_call_function(cpu, msg);
+ spin_lock(&msg_queue->lock);
break;
case BFIN_IPI_CPU_STOP:
+ spin_unlock(&msg_queue->lock);
ipi_cpu_stop(cpu);
+ spin_lock(&msg_queue->lock);
kfree(msg);
break;
default:
smp_flush_data.start = start;
smp_flush_data.end = end;
- if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+ if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
}
EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
}
}
-asmlinkage void init_pda(void)
+asmlinkage void __init init_pda(void)
{
unsigned int cpu = raw_smp_processor_id();
and include PCI device scope covered by these DMA
remapping devices.
+config DMAR_DEFAULT_ON
+ def_bool y
+ prompt "Enable DMA Remapping Devices by default"
+ depends on DMAR
+ help
+ Selecting this option will enable a DMAR device at boot time if
+ one is found. If this option is not selected, DMAR support can
+ be enabled by passing intel_iommu=on to the kernel. It is
+ recommended you say N here while the DMAR code remains
+ experimental.
+
endmenu
endif
if (trigger == IOSAPIC_EDGE)
return -EINVAL;
- for (i = 0; i <= NR_IRQS; i++) {
+ for (i = 0; i < NR_IRQS; i++) {
info = &iosapic_intr_info[i];
if (info->trigger == trigger && info->polarity == pol &&
(info->dmode == IOSAPIC_FIXED ||
/* next, remove hash table entries for this table */
- for (index = 0; index <= UNW_HASH_SIZE; ++index) {
+ for (index = 0; index < UNW_HASH_SIZE; ++index) {
tmp = unw.cache + unw.hash[index];
if (unw.hash[index] >= UNW_CACHE_SIZE
|| tmp->ip < table->start || tmp->ip >= table->end)
if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
pci_addr = IS_PIC_SOFT(pcibus_info) ?
PHYS_TO_DMA(paddr) :
- PHYS_TO_TIODMA(paddr) | dma_attributes;
+ PHYS_TO_TIODMA(paddr);
else
- pci_addr = IS_PIC_SOFT(pcibus_info) ?
- paddr :
- paddr | dma_attributes;
+ pci_addr = paddr;
+ pci_addr |= dma_attributes;
/* Handle Bus mode */
if (IS_PCIX(pcibus_info))
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
/***************************************************************************/
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
/***************************************************************************/
void coldfire_reset(void);
-static void coldfire_qspi_cs_control(u8 cs, u8 command);
-
-/***************************************************************************/
-
-#if defined(CONFIG_SPI)
-
-#if defined(CONFIG_WILDFIRE)
-#define SPI_NUM_CHIPSELECTS 0x02
-#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK 0x18
-
-#define FLASH_BLOCKSIZE (1024*64)
-#define FLASH_NUMBLOCKS 16
-#define FLASH_TYPE "m25p80"
-
-#define M25P80_CS 0
-#define MMC_CS 1
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
- /* sflash */
- [0] = {
- .name = "stm25p80",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
- .mask_flags = 0
- }
-};
-
-#endif
-
-#elif defined(CONFIG_WILDFIREMOD)
-
-#define SPI_NUM_CHIPSELECTS 0x08
-#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK 0x78
-
-#define FLASH_BLOCKSIZE (1024*64)
-#define FLASH_NUMBLOCKS 64
-#define FLASH_TYPE "m25p32"
-/* Reserve 1M for the kernel parition */
-#define FLASH_KERNEL_SIZE (1024 * 1024)
-
-#define M25P80_CS 5
-#define MMC_CS 6
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
- /* sflash */
- [0] = {
- .name = "kernel",
- .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
- .size = FLASH_KERNEL_SIZE,
- .mask_flags = 0
- },
- [1] = {
- .name = "image",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
- .mask_flags = 0
- },
- [2] = {
- .name = "all",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
- .mask_flags = 0
- }
-};
-#endif
-
-#else
-#define SPI_NUM_CHIPSELECTS 0x04
-#define SPI_PAR_VAL 0x7F /* Enable DIN, DOUT, CLK, CS0 - CS4 */
-#endif
-
-#ifdef MMC_CS
-static struct coldfire_spi_chip flash_chip_info = {
- .mode = SPI_MODE_0,
- .bits_per_word = 16,
- .del_cs_to_clk = 17,
- .del_after_trans = 1,
- .void_write_data = 0
-};
-
-static struct coldfire_spi_chip mmc_chip_info = {
- .mode = SPI_MODE_0,
- .bits_per_word = 16,
- .del_cs_to_clk = 17,
- .del_after_trans = 1,
- .void_write_data = 0xFFFF
-};
-#endif
-
-#ifdef M25P80_CS
-static struct flash_platform_data stm25p80_platform_data = {
- .name = "ST M25P80 SPI Flash chip",
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = stm25p_partitions,
- .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
-#endif
- .type = FLASH_TYPE
-};
-#endif
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#ifdef M25P80_CS
- {
- .modalias = "m25p80",
- .max_speed_hz = 16000000,
- .bus_num = 1,
- .chip_select = M25P80_CS,
- .platform_data = &stm25p80_platform_data,
- .controller_data = &flash_chip_info
- },
-#endif
-#ifdef MMC_CS
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 16000000,
- .bus_num = 1,
- .chip_select = MMC_CS,
- .controller_data = &mmc_chip_info
- }
-#endif
-};
-
-static struct coldfire_spi_master coldfire_master_info = {
- .bus_num = 1,
- .num_chipselect = SPI_NUM_CHIPSELECTS,
- .irq_source = MCF5282_QSPI_IRQ_SOURCE,
- .irq_vector = MCF5282_QSPI_IRQ_VECTOR,
- .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
- .irq_lp = 0x2B, /* Level 5 and Priority 3 */
- .par_val = SPI_PAR_VAL,
- .cs_control = coldfire_qspi_cs_control,
-};
-
-static struct resource coldfire_spi_resources[] = {
- [0] = {
- .name = "qspi-par",
- .start = MCF5282_QSPI_PAR,
- .end = MCF5282_QSPI_PAR,
- .flags = IORESOURCE_MEM
- },
-
- [1] = {
- .name = "qspi-module",
- .start = MCF5282_QSPI_QMR,
- .end = MCF5282_QSPI_QMR + 0x18,
- .flags = IORESOURCE_MEM
- },
-
- [2] = {
- .name = "qspi-int-level",
- .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
- .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
- .flags = IORESOURCE_MEM
- },
-
- [3] = {
- .name = "qspi-int-mask",
- .start = MCF5282_INTC0 + MCFINTC_IMRL,
- .end = MCF5282_INTC0 + MCFINTC_IMRL,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct platform_device coldfire_spi = {
- .name = "spi_coldfire",
- .id = -1,
- .resource = coldfire_spi_resources,
- .num_resources = ARRAY_SIZE(coldfire_spi_resources),
- .dev = {
- .platform_data = &coldfire_master_info,
- }
-};
-
-static void coldfire_qspi_cs_control(u8 cs, u8 command)
-{
- u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
-
-#if defined(CONFIG_WILDFIRE)
- u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
-#endif
-#if defined(CONFIG_WILDFIREMOD)
- u8 cs_mask = (cs << 3) & SPI_CS_MASK;
-#endif
-
- /*
- * Don't do anything if the chip select is not
- * one of the port qs pins.
- */
- if (command & QSPI_CS_INIT) {
-#if defined(CONFIG_WILDFIRE)
- MCF5282_GPIO_DDRQS |= cs_bit;
- MCF5282_GPIO_PQSPAR &= ~cs_bit;
-#endif
-
-#if defined(CONFIG_WILDFIREMOD)
- MCF5282_GPIO_DDRQS |= SPI_CS_MASK;
- MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
-#endif
- }
-
- if (command & QSPI_CS_ASSERT) {
- MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
- MCF5282_GPIO_PORTQS |= cs_mask;
- } else if (command & QSPI_CS_DROP) {
- MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
- }
-}
-
-static int __init spi_dev_init(void)
-{
- int retval;
-
- retval = platform_device_register(&coldfire_spi);
- if (retval < 0)
- return retval;
-
- if (ARRAY_SIZE(spi_board_info))
- retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- return retval;
-}
-
-#endif /* CONFIG_SPI */
/***************************************************************************/
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
- select CPU_CAVIUM_OCTEON
+ select SYS_HAS_CPU_CAVIUM_OCTEON
help
The Octeon simulator is software performance model of the Cavium
Octeon Processor. It supports simulating Octeon processors on x86
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
- select CPU_CAVIUM_OCTEON
+ select SYS_HAS_CPU_CAVIUM_OCTEON
select SWAP_IO_SPACE
help
This option supports all of the Octeon reference boards from Cavium
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
+ depends on SYS_HAS_CPU_CAVIUM_OCTEON
select IRQ_CPU
select IRQ_CPU_OCTEON
select CPU_HAS_PREFETCH
config SYS_HAS_CPU_SB1
bool
+config SYS_HAS_CPU_CAVIUM_OCTEON
+ bool
+
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
config 64BIT
bool "64-bit kernel"
depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+ select HAVE_SYSCALL_WRAPPERS
help
Select this option if you want to build a 64-bit kernel.
* setup counter 1 (RTC) to tick at full speed
*/
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
au_sync();
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
au_sync();
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
+CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:01:36 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar 4 23:07:16 2009
#
CONFIG_MIPS=y
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_SNI_RM is not set
CONFIG_MACH_TX39XX=y
# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_JMR3927=y
CONFIG_SOC_TX3927=y
# CONFIG_TOSHIBA_FPCIB0 is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_CEVT_TXX9=y
CONFIG_GPIO_TXX9=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_TX39XX=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
CONFIG_MMU=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
#
# SPI GPIO expanders:
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
CONFIG_TXX9_WDT=y
#
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:03:21 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar 4 23:08:06 2009
#
CONFIG_MIPS=y
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_SNI_RM is not set
# CONFIG_MACH_TX39XX is not set
CONFIG_MACH_TX49XX=y
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_RBTX4927=y
CONFIG_TOSHIBA_RBTX4938=y
+CONFIG_TOSHIBA_RBTX4939=y
CONFIG_SOC_TX4927=y
CONFIG_SOC_TX4938=y
+CONFIG_SOC_TX4939=y
+CONFIG_TXX9_7SEGLED=y
# CONFIG_TOSHIBA_FPCIB0 is not set
CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
#
# Multiplex Pin Select
#
-CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set
# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y
CONFIG_PCI_TX4927=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
CONFIG_CEVT_R4K=y
CONFIG_CEVT_TXX9=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
CONFIG_GPIO_TXX9=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_TX49XX=y
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_TX49XX=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
CONFIG_MMU=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_TX4938=y
+CONFIG_BLK_DEV_IDE_TX4939=y
+CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
CONFIG_SERIAL_TXX9_STDSERIAL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# SPI Master Controller Drivers
#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
CONFIG_SPI_TXX9=y
#
# SPI Protocol Masters
#
-CONFIG_EEPROM_AT25=y
# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
CONFIG_TXX9_WDT=m
#
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_TX4939=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
/*
* Architecture specific compatibility types
*/
+#include <linux/seccomp.h>
+#include <linux/thread_info.h>
#include <linux/types.h>
#include <asm/page.h>
#include <asm/ptrace.h>
compat_ulong_t __unused2;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* _ASM_COMPAT_H */
__instruction_hazard(); \
} while (0)
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+ defined(CONFIG_CPU_R5500)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
* Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
* current versions due to erratum G105.
*
- * VR7701 only implements the Load prefetch.
+ * VR5500 (including VR5701 and VR7701) only implement load prefetch.
*
* Finally MIPS32 and MIPS64 implement all of the following hints.
*/
#ifndef __ASM_SECCOMP_H
-#include <linux/thread_info.h>
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
case CPU_R4650:
case CPU_R4700:
case CPU_R5000:
+ case CPU_R5500:
case CPU_NEVADA:
case CPU_4KC:
case CPU_4KEC:
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
#endif
seq_printf(p, " %14s", irq_desc[i].chip->name);
- seq_printf(p, "-%-8s", irq_desc[i].name);
seq_printf(p, " %s", action->name);
for (action=action->next; action; action = action->next)
#include <linux/module.h>
#include <linux/binfmts.h>
#include <linux/security.h>
+#include <linux/syscalls.h>
#include <linux/compat.h>
#include <linux/vfs.h>
#include <linux/ipc.h>
#define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
#endif
-asmlinkage unsigned long
-sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
- unsigned long flags, unsigned long fd, unsigned long pgoff)
+SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ unsigned long, pgoff)
{
struct file * file = NULL;
unsigned long error;
int rlim_max;
};
-asmlinkage long sys32_truncate64(const char __user * path,
- unsigned long __dummy, int a2, int a3)
+SYSCALL_DEFINE4(32_truncate64, const char __user *, path,
+ unsigned long, __dummy, unsigned long, a2, unsigned long, a3)
{
return sys_truncate(path, merge_64(a2, a3));
}
-asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
- int a2, int a3)
+SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy,
+ unsigned long, a2, unsigned long, a3)
{
return sys_ftruncate(fd, merge_64(a2, a3));
}
-asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
- unsigned int offset_low, loff_t __user * result,
- unsigned int origin)
+SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high,
+ unsigned long, offset_low, loff_t __user *, result,
+ unsigned long, origin)
{
return sys_llseek(fd, offset_high, offset_low, result, origin);
}
lseek back to original location. They fail just like lseek does on
non-seekable files. */
-asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
- size_t count, u32 unused, u64 a4, u64 a5)
+SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
+ unsigned long, unused, unsigned long, a4, unsigned long, a5)
{
return sys_pread64(fd, buf, count, merge_64(a4, a5));
}
-asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
- size_t count, u32 unused, u64 a4, u64 a5)
+SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf,
+ size_t, count, u32, unused, u64, a4, u64, a5)
{
return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
}
-asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
- struct compat_timespec __user *interval)
+SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid,
+ struct compat_timespec __user *, interval)
{
struct timespec t;
int ret;
#ifdef CONFIG_SYSVIPC
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
+ unsigned long, ptr, unsigned long, fifth)
{
int version, err;
#else
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
+ u32, ptr, u32, fifth)
{
return -ENOSYS;
}
#endif /* CONFIG_SYSVIPC */
#ifdef CONFIG_MIPS32_N32
-asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
+SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg)
{
/* compat_sys_semctl expects a pointer to union semun */
u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
return compat_sys_semctl(semid, semnum, cmd, uptr);
}
-asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg)
+SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz,
+ int, msgflg)
{
return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp));
}
-asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp,
- int msgflg)
+SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
+ int, msgtyp, int, msgflg)
{
return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64,
compat_ptr(msgp));
#ifdef CONFIG_SYSCTL_SYSCALL
-asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
+SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
{
struct sysctl_args32 tmp;
int error;
return error;
}
+#else
+
+SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
+{
+ return -ENOSYS;
+}
+
#endif /* CONFIG_SYSCTL_SYSCALL */
-asmlinkage long sys32_newuname(struct new_utsname __user * name)
+SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
{
int ret = 0;
return ret;
}
-asmlinkage int sys32_personality(unsigned long personality)
+SYSCALL_DEFINE1(32_personality, unsigned long, personality)
{
int ret;
personality &= 0xffffffff;
extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
-asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
+SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32)
{
int err;
struct ustat tmp;
return err;
}
-asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
- s32 count)
+SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd,
+ compat_off_t __user *, offset, s32, count)
{
mm_segment_t old_fs = get_fs();
int ret;
sys sys_swapon 2
sys sys_reboot 3
sys sys_old_readdir 3
- sys old_mmap 6 /* 4090 */
+ sys sys_mips_mmap 6 /* 4090 */
sys sys_munmap 2
sys sys_truncate 2
sys sys_ftruncate 2
sys sys_sendfile 4
sys sys_ni_syscall 0
sys sys_ni_syscall 0
- sys sys_mmap2 6 /* 4210 */
+ sys sys_mips_mmap2 6 /* 4210 */
sys sys_truncate64 4
sys sys_ftruncate64 4
sys sys_stat64 2
PTR sys_newlstat
PTR sys_poll
PTR sys_lseek
- PTR old_mmap
+ PTR sys_mips_mmap
PTR sys_mprotect /* 5010 */
PTR sys_munmap
PTR sys_brk
PTR sys_newlstat
PTR sys_poll
PTR sys_lseek
- PTR old_mmap
+ PTR sys_mips_mmap
PTR sys_mprotect /* 6010 */
PTR sys_munmap
PTR sys_brk
- PTR sys32_rt_sigaction
- PTR sys32_rt_sigprocmask
+ PTR sys_32_rt_sigaction
+ PTR sys_32_rt_sigprocmask
PTR compat_sys_ioctl /* 6015 */
PTR sys_pread64
PTR sys_pwrite64
PTR compat_sys_setitimer
PTR sys_alarm
PTR sys_getpid
- PTR sys32_sendfile
+ PTR sys_32_sendfile
PTR sys_socket /* 6040 */
PTR sys_connect
PTR sys_accept
PTR sys_exit
PTR compat_sys_wait4
PTR sys_kill /* 6060 */
- PTR sys32_newuname
+ PTR sys_32_newuname
PTR sys_semget
PTR sys_semop
- PTR sysn32_semctl
+ PTR sys_n32_semctl
PTR sys_shmdt /* 6065 */
PTR sys_msgget
- PTR sysn32_msgsnd
- PTR sysn32_msgrcv
+ PTR sys_n32_msgsnd
+ PTR sys_n32_msgrcv
PTR compat_sys_msgctl
PTR compat_sys_fcntl /* 6070 */
PTR sys_flock
PTR sys_getsid
PTR sys_capget
PTR sys_capset
- PTR sys32_rt_sigpending /* 6125 */
+ PTR sys_32_rt_sigpending /* 6125 */
PTR compat_sys_rt_sigtimedwait
- PTR sys32_rt_sigqueueinfo
+ PTR sys_32_rt_sigqueueinfo
PTR sysn32_rt_sigsuspend
PTR sys32_sigaltstack
PTR compat_sys_utime /* 6130 */
PTR sys_mknod
- PTR sys32_personality
- PTR sys32_ustat
+ PTR sys_32_personality
+ PTR sys_32_ustat
PTR compat_sys_statfs
PTR compat_sys_fstatfs /* 6135 */
PTR sys_sysfs
PTR sys_sched_getscheduler
PTR sys_sched_get_priority_max
PTR sys_sched_get_priority_min
- PTR sys32_sched_rr_get_interval /* 6145 */
+ PTR sys_32_sched_rr_get_interval /* 6145 */
PTR sys_mlock
PTR sys_munlock
PTR sys_mlockall
PTR sys_munlockall
PTR sys_vhangup /* 6150 */
PTR sys_pivot_root
- PTR sys32_sysctl
+ PTR sys_32_sysctl
PTR sys_prctl
PTR compat_sys_adjtimex
PTR compat_sys_setrlimit /* 6155 */
PTR sys_olduname
PTR sys_umask /* 4060 */
PTR sys_chroot
- PTR sys32_ustat
+ PTR sys_32_ustat
PTR sys_dup2
PTR sys_getppid
PTR sys_getpgrp /* 4065 */
PTR sys_setsid
- PTR sys32_sigaction
+ PTR sys_32_sigaction
PTR sys_sgetmask
PTR sys_ssetmask
PTR sys_setreuid /* 4070 */
PTR sys_swapon
PTR sys_reboot
PTR compat_sys_old_readdir
- PTR old_mmap /* 4090 */
+ PTR sys_mips_mmap /* 4090 */
PTR sys_munmap
PTR sys_truncate
PTR sys_ftruncate
PTR compat_sys_wait4
PTR sys_swapoff /* 4115 */
PTR compat_sys_sysinfo
- PTR sys32_ipc
+ PTR sys_32_ipc
PTR sys_fsync
PTR sys32_sigreturn
PTR sys32_clone /* 4120 */
PTR sys_setdomainname
- PTR sys32_newuname
+ PTR sys_32_newuname
PTR sys_ni_syscall /* sys_modify_ldt */
PTR compat_sys_adjtimex
PTR sys_mprotect /* 4125 */
PTR sys_fchdir
PTR sys_bdflush
PTR sys_sysfs /* 4135 */
- PTR sys32_personality
+ PTR sys_32_personality
PTR sys_ni_syscall /* for afs_syscall */
PTR sys_setfsuid
PTR sys_setfsgid
- PTR sys32_llseek /* 4140 */
+ PTR sys_32_llseek /* 4140 */
PTR compat_sys_getdents
PTR compat_sys_select
PTR sys_flock
PTR sys_ni_syscall /* 4150 */
PTR sys_getsid
PTR sys_fdatasync
- PTR sys32_sysctl
+ PTR sys_32_sysctl
PTR sys_mlock
PTR sys_munlock /* 4155 */
PTR sys_mlockall
PTR sys_sched_yield
PTR sys_sched_get_priority_max
PTR sys_sched_get_priority_min
- PTR sys32_sched_rr_get_interval /* 4165 */
+ PTR sys_32_sched_rr_get_interval /* 4165 */
PTR compat_sys_nanosleep
PTR sys_mremap
PTR sys_accept
PTR sys_getresgid
PTR sys_prctl
PTR sys32_rt_sigreturn
- PTR sys32_rt_sigaction
- PTR sys32_rt_sigprocmask /* 4195 */
- PTR sys32_rt_sigpending
+ PTR sys_32_rt_sigaction
+ PTR sys_32_rt_sigprocmask /* 4195 */
+ PTR sys_32_rt_sigpending
PTR compat_sys_rt_sigtimedwait
- PTR sys32_rt_sigqueueinfo
+ PTR sys_32_rt_sigqueueinfo
PTR sys32_rt_sigsuspend
- PTR sys32_pread /* 4200 */
- PTR sys32_pwrite
+ PTR sys_32_pread /* 4200 */
+ PTR sys_32_pwrite
PTR sys_chown
PTR sys_getcwd
PTR sys_capget
PTR sys_capset /* 4205 */
PTR sys32_sigaltstack
- PTR sys32_sendfile
+ PTR sys_32_sendfile
PTR sys_ni_syscall
PTR sys_ni_syscall
- PTR sys32_mmap2 /* 4210 */
- PTR sys32_truncate64
- PTR sys32_ftruncate64
+ PTR sys_mips_mmap2 /* 4210 */
+ PTR sys_32_truncate64
+ PTR sys_32_ftruncate64
PTR sys_newstat
PTR sys_newlstat
PTR sys_newfstat /* 4215 */
PTR compat_sys_mq_notify /* 4275 */
PTR compat_sys_mq_getsetattr
PTR sys_ni_syscall /* sys_vserver */
- PTR sys32_waitid
+ PTR sys_32_waitid
PTR sys_ni_syscall /* available, was setaltroot */
PTR sys_add_key /* 4280 */
PTR sys_request_key
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/compiler.h>
+#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <asm/abi.h>
}
#ifdef CONFIG_TRAD_SIGNALS
-asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act,
- struct sigaction __user *oact)
+SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
+ struct sigaction __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
return -ERESTARTNOHAND;
}
-asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act,
- struct sigaction32 __user *oact)
+SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act,
+ struct sigaction32 __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
.restart = __NR_O32_restart_syscall
};
-asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
- struct sigaction32 __user *oact,
- unsigned int sigsetsize)
+SYSCALL_DEFINE4(32_rt_sigaction, int, sig,
+ const struct sigaction32 __user *, act,
+ struct sigaction32 __user *, oact, unsigned int, sigsetsize)
{
struct k_sigaction new_sa, old_sa;
int ret = -EINVAL;
return ret;
}
-asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
- compat_sigset_t __user *oset, unsigned int sigsetsize)
+SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set,
+ compat_sigset_t __user *, oset, unsigned int, sigsetsize)
{
sigset_t old_set, new_set;
int ret;
return ret;
}
-asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
- unsigned int sigsetsize)
+SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset,
+ unsigned int, sigsetsize)
{
int ret;
sigset_t set;
return ret;
}
-asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
+SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig,
+ compat_siginfo_t __user *, uinfo)
{
siginfo_t info;
int ret;
return ret;
}
-asmlinkage long
-sys32_waitid(int which, compat_pid_t pid,
- compat_siginfo_t __user *uinfo, int options,
- struct compat_rusage __user *uru)
+SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid,
+ compat_siginfo_t __user *, uinfo, int, options,
+ struct compat_rusage __user *, uru)
{
siginfo_t info;
struct rusage ru;
return error;
}
-asmlinkage unsigned long
-old_mmap(unsigned long addr, unsigned long len, int prot,
- int flags, int fd, off_t offset)
+SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long,
+ fd, off_t, offset)
{
unsigned long result;
return result;
}
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
- unsigned long flags, unsigned long fd, unsigned long pgoff)
+SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ unsigned long, pgoff)
{
if (pgoff & (~PAGE_MASK >> 12))
return -EINVAL;
/*
* Compacrapability ...
*/
-asmlinkage int sys_uname(struct old_utsname __user * name)
+SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
{
if (name && !copy_to_user(name, utsname(), sizeof (*name)))
return 0;
/*
* Compacrapability ...
*/
-asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
{
int error;
return error;
}
-asmlinkage int sys_set_thread_area(unsigned long addr)
+SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
{
struct thread_info *ti = task_thread_info(current);
return 0;
}
-asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
+asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3)
{
switch (cmd) {
case MIPS_ATOMIC_SET:
*
* This is really horribly ugly.
*/
-asmlinkage int sys_ipc(unsigned int call, int first, int second,
- unsigned long third, void __user *ptr, long fifth)
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
+ unsigned long, third, void __user *, ptr, long, fifth)
{
int version, ret;
/*
* No implemented yet ...
*/
-asmlinkage int sys_cachectl(char *addr, int nbytes, int op)
+SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
{
return -ENOSYS;
}
#include <linux/linkage.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/syscalls.h>
#include <linux/mm.h>
#include <asm/cacheflush.h>
* We could optimize the case where the cache argument is not BCACHE but
* that seems very atypical use ...
*/
-asmlinkage int sys_cacheflush(unsigned long addr,
- unsigned long bytes, unsigned int cache)
+SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
+ unsigned int, cache)
{
if (bytes == 0)
return 0;
*/
cache_line_size = cpu_dcache_line_size();
switch (current_cpu_type()) {
+ case CPU_R5500:
case CPU_TX49XX:
- /* TX49 supports only Pref_Load */
+ /* These processors only support the Pref_Load. */
pref_bias_copy_load = 256;
break;
case CPU_BCM4710:
case CPU_LOONGSON2:
case CPU_CAVIUM_OCTEON:
+ case CPU_R5500:
if (m4kc_tlbp_war())
uasm_i_nop(p);
tlbw(p);
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:29 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar 6 00:07:38 2009
#
# CONFIG_PPC64 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
# Networking options
#
-# CONFIG_NET_NS is not set
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:46 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar 6 00:09:08 2009
#
# CONFIG_PPC64 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_EXPORTFS=m
#
# Partition Types
compat_ulong_t __unused6;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_COMPAT_H */
#ifndef _ASM_POWERPC_SECCOMP_H
#define _ASM_POWERPC_SECCOMP_H
-#ifdef __KERNEL__
-#include <linux/thread_info.h>
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
unsigned int flags)
{
- char *ptr = (char *) ¤t->thread.TS_FPR(reg);
- int i, ret;
+ char *ptr0 = (char *) ¤t->thread.TS_FPR(reg);
+ char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1);
+ int i, ret, sw = 0;
if (!(flags & F))
return 0;
if (reg & 1)
return 0; /* invalid form: FRS/FRT must be even */
- if (!(flags & SW)) {
- /* not byte-swapped - easy */
- if (!(flags & ST))
- ret = __copy_from_user(ptr, addr, 16);
- else
- ret = __copy_to_user(addr, ptr, 16);
- } else {
- /* each FPR value is byte-swapped separately */
- ret = 0;
- for (i = 0; i < 16; ++i) {
- if (!(flags & ST))
- ret |= __get_user(ptr[i^7], addr + i);
- else
- ret |= __put_user(ptr[i^7], addr + i);
+ if (flags & SW)
+ sw = 7;
+ ret = 0;
+ for (i = 0; i < 8; ++i) {
+ if (!(flags & ST)) {
+ ret |= __get_user(ptr0[i^sw], addr + i);
+ ret |= __get_user(ptr1[i^sw], addr + i + 8);
+ } else {
+ ret |= __put_user(ptr0[i^sw], addr + i);
+ ret |= __put_user(ptr1[i^sw], addr + i + 8);
}
}
if (ret)
72: std r8,8(r3)
beq+ 3f
addi r3,r3,16
-23: ld r9,8(r4)
.Ldo_tail:
bf cr7*4+1,1f
- rotldi r9,r9,32
+23: lwz r9,8(r4)
+ addi r4,r4,4
73: stw r9,0(r3)
addi r3,r3,4
1: bf cr7*4+2,2f
- rotldi r9,r9,16
+44: lhz r9,8(r4)
+ addi r4,r4,2
74: sth r9,0(r3)
addi r3,r3,2
2: bf cr7*4+3,3f
- rotldi r9,r9,8
+45: lbz r9,8(r4)
75: stb r9,0(r3)
3: li r3,0
blr
6: cmpwi cr1,r5,8
addi r3,r3,32
sld r9,r9,r10
- ble cr1,.Ldo_tail
+ ble cr1,7f
34: ld r0,8(r4)
srd r7,r0,r11
or r9,r7,r9
- b .Ldo_tail
+7:
+ bf cr7*4+1,1f
+ rotldi r9,r9,32
+94: stw r9,0(r3)
+ addi r3,r3,4
+1: bf cr7*4+2,2f
+ rotldi r9,r9,16
+95: sth r9,0(r3)
+ addi r3,r3,2
+2: bf cr7*4+3,3f
+ rotldi r9,r9,8
+96: stb r9,0(r3)
+3: li r3,0
+ blr
.Ldst_unaligned:
PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */
121:
132:
addi r3,r3,8
-123:
134:
135:
138:
140:
141:
142:
+123:
+144:
+145:
/*
* here we have had a fault on a load and r3 points to the first
187:
188:
189:
+194:
+195:
+196:
1:
ld r6,-24(r1)
ld r5,-8(r1)
.llong 72b,172b
.llong 23b,123b
.llong 73b,173b
+ .llong 44b,144b
.llong 74b,174b
+ .llong 45b,145b
.llong 75b,175b
.llong 24b,124b
.llong 25b,125b
.llong 79b,179b
.llong 80b,180b
.llong 34b,134b
+ .llong 94b,194b
+ .llong 95b,195b
+ .llong 96b,196b
.llong 35b,135b
.llong 81b,181b
.llong 36b,136b
3: std r8,8(r3)
beq 3f
addi r3,r3,16
- ld r9,8(r4)
.Ldo_tail:
bf cr7*4+1,1f
- rotldi r9,r9,32
+ lwz r9,8(r4)
+ addi r4,r4,4
stw r9,0(r3)
addi r3,r3,4
1: bf cr7*4+2,2f
- rotldi r9,r9,16
+ lhz r9,8(r4)
+ addi r4,r4,2
sth r9,0(r3)
addi r3,r3,2
2: bf cr7*4+3,3f
- rotldi r9,r9,8
+ lbz r9,8(r4)
stb r9,0(r3)
3: ld r3,48(r1) /* return dest pointer */
blr
cmpwi cr1,r5,8
addi r3,r3,32
sld r9,r9,r10
- ble cr1,.Ldo_tail
+ ble cr1,6f
ld r0,8(r4)
srd r7,r0,r11
or r9,r7,r9
- b .Ldo_tail
+6:
+ bf cr7*4+1,1f
+ rotldi r9,r9,32
+ stw r9,0(r3)
+ addi r3,r3,4
+1: bf cr7*4+2,2f
+ rotldi r9,r9,16
+ sth r9,0(r3)
+ addi r3,r3,2
+2: bf cr7*4+3,3f
+ rotldi r9,r9,8
+ stb r9,0(r3)
+3: ld r3,48(r1) /* return dest pointer */
+ blr
.Ldst_unaligned:
PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7
{
unsigned int val;
+ /* Do not do the fixup on other platforms! */
+ if (!machine_is(gef_sbc610))
+ return;
+
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
#include <linux/kernel.h>
#include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include "mpc10x.h"
-static struct mtd_partition linkstation_physmap_partitions[] = {
- {
- .name = "mtd_firmimg",
- .offset = 0x000000,
- .size = 0x300000,
- },
- {
- .name = "mtd_bootcode",
- .offset = 0x300000,
- .size = 0x070000,
- },
- {
- .name = "mtd_status",
- .offset = 0x370000,
- .size = 0x010000,
- },
- {
- .name = "mtd_conf",
- .offset = 0x380000,
- .size = 0x080000,
- },
- {
- .name = "mtd_allflash",
- .offset = 0x000000,
- .size = 0x400000,
- },
- {
- .name = "mtd_data",
- .offset = 0x310000,
- .size = 0x0f0000,
- },
-};
-
static __initdata struct of_device_id of_bus_ids[] = {
{ .type = "soc", },
{ .compatible = "simple-bus", },
static void __init linkstation_setup_arch(void)
{
struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
- physmap_set_partitions(linkstation_physmap_partitions,
- ARRAY_SIZE(linkstation_physmap_partitions));
-#endif
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include "mpc10x.h"
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition storcenter_physmap_partitions[] = {
- {
- .name = "kernel",
- .offset = 0x000000,
- .size = 0x170000,
- },
- {
- .name = "rootfs",
- .offset = 0x170000,
- .size = 0x590000,
- },
- {
- .name = "uboot",
- .offset = 0x700000,
- .size = 0x040000,
- },
- {
- .name = "config",
- .offset = 0x740000,
- .size = 0x0c0000,
- },
-};
-#endif
-
-
static __initdata struct of_device_id storcenter_of_bus[] = {
{ .name = "soc", },
{},
{
struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
- physmap_set_partitions(storcenter_physmap_partitions,
- ARRAY_SIZE(storcenter_physmap_partitions));
-#endif
-
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
storcenter_add_bridge(np);
{
u32 ma, pcila, pciha;
+ /* Hack warning ! The "old" PCI 2.x cell only let us configure the low
+ * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit
+ * address are actually hard wired to a value that appears to depend
+ * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx.
+ *
+ * The trick here is we just crop those top bits and ignore them when
+ * programming the chip. That means the device-tree has to be right
+ * for the specific part used (we don't print a warning if it's wrong
+ * but on the other hand, you'll crash quickly enough), but at least
+ * this code should work whatever the hard coded value is
+ */
+ plb_addr &= 0xffffffffull;
+
+ /* Note: Due to the above hack, the test below doesn't actually test
+ * if you address is above 4G, but it tests that address and
+ * (address + size) are both contained in the same 4G
+ */
if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
size < 0x1000 || (plb_addr & (size - 1)) != 0) {
printk(KERN_WARNING "%s: Resource out of range\n",
module_init(aes_s390_init);
module_exit(aes_s390_fini);
-MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-all");
MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
MODULE_LICENSE("GPL");
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
-#include <media/ov772x.h>
+#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
}
#ifdef CONFIG_I2C
-/* support for the old ncm03j camera */
static unsigned char camera_ncm03j_magic[] =
{
0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
};
-static int camera_probe(void)
-{
- struct i2c_adapter *a = i2c_get_adapter(0);
- struct i2c_msg msg;
- int ret;
-
- camera_power(1);
- msg.addr = 0x6e;
- msg.buf = camera_ncm03j_magic;
- msg.len = 2;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- camera_power(0);
-
- return ret;
-}
-
static int camera_set_capture(struct soc_camera_platform_info *info,
int enable)
{
.platform_data = &camera_info,
},
};
-
-static int __init camera_setup(void)
-{
- if (camera_probe() > 0)
- platform_device_register(&camera_device);
-
- return 0;
-}
-late_initcall(camera_setup);
-
#endif /* CONFIG_I2C */
-static int ov7725_power(struct device *dev, int mode)
-{
- camera_power(0);
- if (mode)
- camera_power(1);
-
- return 0;
-}
-
-static struct ov772x_camera_info ov7725_info = {
- .buswidth = SOCAM_DATAWIDTH_8,
- .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
- .link = {
- .power = ov7725_power,
- },
-};
-
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
+#ifdef CONFIG_I2C
+ &camera_device,
+#endif
&nand_flash_device,
&sdcard_cn3_device,
};
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
- {
- I2C_BOARD_INFO("ov772x", 0x21),
- .platform_data = &ov7725_info,
- },
};
static struct spi_board_info ap325rxa_spi_devices[] = {
#include <asm/freq.h>
#include <asm/io.h>
-const static int pll1rate[]={1,2,3,4,6,8};
-const static int pfc_divisors[]={1,2,3,4,6,8,12};
+static const int pll1rate[]={1,2,3,4,6,8};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
#define ifc_divisors pfc_divisors
#if (CONFIG_SH_CLK_MD == 0)
unsigned int __unused2;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* _ASM_SPARC64_COMPAT_H */
#ifndef _ASM_SECCOMP_H
-#include <linux/thread_info.h> /* already defines TIF_32BIT */
-
-#ifndef TIF_32BIT
-#error "unexpected TIF_32BIT on sparc64"
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
buf[1] = '?';
buf[2] = '?';
buf[3] = '\0';
+ return 0;
}
p = dp->controller;
prop = &p->layout;
sun4u_irq_enable(virt_irq);
}
+/* Don't do anything. The desc->status check for IRQ_DISABLED in
+ * handler_irq() will skip the handler call and that will leave the
+ * interrupt in the sent state. The next ->enable() call will hit the
+ * ICLR register to reset the state machine.
+ *
+ * This scheme is necessary, instead of clearing the Valid bit in the
+ * IMAP register, to handle the case of IMAP registers being shared by
+ * multiple INOs (and thus ICLR registers). Since we use a different
+ * virtual IRQ for each shared IMAP instance, the generic code thinks
+ * there is only one user so it prematurely calls ->disable() on
+ * free_irq().
+ *
+ * We have to provide an explicit ->disable() method instead of using
+ * NULL to get the default. The reason is that if the generic code
+ * sees that, it also hooks up a default ->shutdown method which
+ * invokes ->mask() which we do not want. See irq_chip_set_defaults().
+ */
static void sun4u_irq_disable(unsigned int virt_irq)
{
- struct irq_handler_data *data = get_irq_chip_data(virt_irq);
-
- if (likely(data)) {
- unsigned long imap = data->imap;
- unsigned long tmp = upa_readq(imap);
-
- tmp &= ~IMAP_VALID;
- upa_writeq(tmp, imap);
- }
}
static void sun4u_irq_eoi(unsigned int virt_irq)
desc = irq_desc + virt_irq;
- desc->handle_irq(virt_irq, desc);
+ if (!(desc->status & IRQ_DISABLED))
+ desc->handle_irq(virt_irq, desc);
bucket_pa = next_pa;
}
ret = poke_user(child, addr, data);
break;
+ case PTRACE_SYSEMU:
+ case PTRACE_SYSEMU_SINGLESTEP:
+ ret = -EIO;
+ break;
+
/* continue and stop at next (return from) syscall */
case PTRACE_SYSCALL:
/* restart after signal. */
#undef memset
extern size_t strlen(const char *);
-extern void *memcpy(void *, const void *, size_t);
extern void *memmove(void *, const void *, size_t);
extern void *memset(void *, int, size_t);
extern int printf(const char *, ...);
EXPORT_SYMBOL(strstr);
#endif
+#ifndef __x86_64__
+extern void *memcpy(void *, const void *, size_t);
EXPORT_SYMBOL(memcpy);
+#endif
+
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(printf);
remapping devices.
config DMAR_DEFAULT_ON
- def_bool n
+ def_bool y
prompt "Enable DMA Remapping Devices by default"
depends on DMAR
help
#else /* !CONFIG_X86_32 */
-#define MAX_EFI_IO_PAGES 100
-
extern u64 efi_call0(void *fp);
extern u64 efi_call1(void *fp, u64 arg1);
extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
#include <asm/apicdef.h>
#include <asm/page.h>
#include <asm/vsyscall.h>
-#include <asm/efi.h>
/*
* Here we define all the compile-time 'special' virtual
FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */
FIX_IO_APIC_BASE_0,
FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
- FIX_EFI_IO_MAP_LAST_PAGE,
- FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
- + MAX_EFI_IO_PAGES - 1,
#ifdef CONFIG_PARAVIRT
FIX_PARAVIRT_BOOTMAP,
#endif
#else /* CONFIG_X86_32 */
-extern void finit(void);
+#ifdef CONFIG_MATH_EMULATION
+extern void finit_task(struct task_struct *tsk);
+#else
+static inline void finit_task(struct task_struct *tsk)
+{
+}
+#endif
static inline void tolerant_fwait(void)
{
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+int
+is_io_mapping_possible(resource_size_t base, unsigned long size);
+
void *
iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
#ifndef _ASM_X86_SECCOMP_32_H
#define _ASM_X86_SECCOMP_32_H
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on i386"
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
#ifndef _ASM_X86_SECCOMP_64_H
#define _ASM_X86_SECCOMP_64_H
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on x86_64"
-#else
-#define TIF_32BIT TIF_IA32
-#endif
-
#include <linux/unistd.h>
#include <asm/ia32_unistd.h>
.name = "p4-clockmod",
.owner = THIS_MODULE,
.attr = p4clockmod_attr,
- .hide_interface = 1,
};
spin_unlock_irqrestore(&ds_lock, irq);
- ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+ ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
ds_resume_pebs(tracer);
return tracer;
void ds_exit_thread(struct task_struct *tsk)
{
- WARN_ON(tsk->thread.ds_ctx);
}
efi_memory_desc_t *md;
efi_status_t status;
unsigned long size;
- u64 end, systab, addr, npages;
+ u64 end, systab, addr, npages, end_pfn;
void *p, *va;
efi.systab = NULL;
size = md->num_pages << EFI_PAGE_SHIFT;
end = md->phys_addr + size;
- if (PFN_UP(end) <= max_low_pfn_mapped)
+ end_pfn = PFN_UP(end);
+ if (end_pfn <= max_low_pfn_mapped
+ || (end_pfn > (1UL << (32 - PAGE_SHIFT))
+ && end_pfn <= max_pfn_mapped))
va = __va(md->phys_addr);
else
va = efi_ioremap(md->phys_addr, size);
void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
{
- static unsigned pages_mapped __initdata;
- unsigned i, pages;
- unsigned long offset;
+ unsigned long last_map_pfn;
- pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr);
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
-
- if (pages_mapped + pages > MAX_EFI_IO_PAGES)
+ last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+ if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
return NULL;
- for (i = 0; i < pages; i++) {
- __set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped,
- phys_addr, PAGE_KERNEL);
- phys_addr += PAGE_SIZE;
- pages_mapped++;
- }
-
- return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \
- (pages_mapped - pages)) + offset;
+ return (void __iomem *)__va(phys_addr);
}
#ifdef CONFIG_X86_32
if (!HAVE_HWFP) {
memset(tsk->thread.xstate, 0, xstate_size);
- finit();
+ finit_task(tsk);
set_stopped_child_used_math(tsk);
return 0;
}
#ifdef CONFIG_X86_32
# define IS_IA32 1
#elif defined CONFIG_IA32_EMULATION
-# define IS_IA32 test_thread_flag(TIF_IA32)
+# define IS_IA32 is_compat_task()
#else
# define IS_IA32 0
#endif
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
},
},
+ { /* Handle problems with rebooting on Dell XPS710 */
+ .callback = set_bios_reboot,
+ .ident = "Dell XPS710",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
+ },
+ },
{ }
};
finish_e820_parsing();
+ if (efi_enabled)
+ efi_init();
+
dmi_scan_machine();
dmi_check_system(bad_bios_dmi_table);
insert_resource(&iomem_resource, &data_resource);
insert_resource(&iomem_resource, &bss_resource);
- if (efi_enabled)
- efi_init();
#ifdef CONFIG_X86_32
if (ppro_with_ram_bug()) {
* flush_tlb_user() for both user and kernel mappings unless
* the Page Global Enable (PGE) feature bit is set. */
*dx |= 0x00002000;
+ /* We also lie, and say we're family id 5. 6 or greater
+ * leads to a rdmsr in early_init_intel which we can't handle.
+ * Family ID is returned as bits 8-12 in ax. */
+ *ax &= 0xFFFFF0FF;
+ *ax |= 0x00000500;
break;
case 0x80000000:
/* Futureproof this a little: if they ask how much extended
/* Some systems map "vectors" to interrupts weirdly. Lguest has
* a straightforward 1 to 1 mapping, so force that here. */
__get_cpu_var(vector_irq)[vector] = i;
- if (vector != SYSCALL_VECTOR) {
- set_intr_gate(vector,
- interrupt[vector-FIRST_EXTERNAL_VECTOR]);
- set_irq_chip_and_handler_name(i, &lguest_irq_controller,
- handle_level_irq,
- "level");
- }
+ if (vector != SYSCALL_VECTOR)
+ set_intr_gate(vector, interrupt[i]);
}
/* This call is required to set up for 4k stacks, where we have
* separate stacks for hard and soft interrupts. */
irq_ctx_init(smp_processor_id());
}
+void lguest_setup_irq(unsigned int irq)
+{
+ irq_to_desc_alloc_cpu(irq, 0);
+ set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
+ handle_level_irq, "level");
+}
+
/*
* Time.
*
/* Bitmask of CPUs present in the system - exported by i386_syms.c, used
* by scheduler but indexed physically */
-cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+static cpumask_t voyager_phys_cpu_present_map = CPU_MASK_NONE;
/* The internal functions */
static void send_CPI(__u32 cpuset, __u8 cpi);
/* set up everything for just this CPU, we can alter
* this as we start the other CPUs later */
/* now get the CPU disposition from the extended CMOS */
- cpus_addr(phys_cpu_present_map)[0] =
+ cpus_addr(voyager_phys_cpu_present_map)[0] =
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK);
- cpus_addr(phys_cpu_present_map)[0] |=
+ cpus_addr(voyager_phys_cpu_present_map)[0] |=
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
- cpus_addr(phys_cpu_present_map)[0] |=
+ cpus_addr(voyager_phys_cpu_present_map)[0] |=
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
2) << 16;
- cpus_addr(phys_cpu_present_map)[0] |=
+ cpus_addr(voyager_phys_cpu_present_map)[0] |=
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
3) << 24;
- init_cpu_possible(&phys_cpu_present_map);
- printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
- cpus_addr(phys_cpu_present_map)[0]);
+ init_cpu_possible(&voyager_phys_cpu_present_map);
+ printk("VOYAGER SMP: voyager_phys_cpu_present_map = 0x%lx\n",
+ cpus_addr(voyager_phys_cpu_present_map)[0]);
/* Here we set up the VIC to enable SMP */
/* enable the CPIs by writing the base vector to their register */
outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER);
/* now that the cat has probed the Voyager System Bus, sanity
* check the cpu map */
if (((voyager_quad_processors | voyager_extended_vic_processors)
- & cpus_addr(phys_cpu_present_map)[0]) !=
- cpus_addr(phys_cpu_present_map)[0]) {
+ & cpus_addr(voyager_phys_cpu_present_map)[0]) !=
+ cpus_addr(voyager_phys_cpu_present_map)[0]) {
/* should panic */
printk("\n\n***WARNING*** "
"Sanity check of CPU present map FAILED\n");
}
} else if (voyager_level == 4)
voyager_extended_vic_processors =
- cpus_addr(phys_cpu_present_map)[0];
+ cpus_addr(voyager_phys_cpu_present_map)[0];
/* this sets up the idle task to run on the current cpu */
voyager_extended_cpus = 1;
/* loop over all the extended VIC CPUs and boot them. The
* Quad CPUs must be bootstrapped by their extended VIC cpu */
for (i = 0; i < nr_cpu_ids; i++) {
- if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map))
+ if (i == boot_cpu_id || !cpu_isset(i, voyager_phys_cpu_present_map))
continue;
do_boot_cpu(i);
/* This udelay seems to be needed for the Quad boots
}
/* Needs to be externally visible */
-void finit(void)
+void finit_task(struct task_struct *tsk)
{
- control_word = 0x037f;
- partial_status = 0;
- top = 0; /* We don't keep top in the status word internally. */
- fpu_tag_word = 0xffff;
+ struct i387_soft_struct *soft = &tsk->thread.xstate->soft;
+ struct address *oaddr, *iaddr;
+ soft->cwd = 0x037f;
+ soft->swd = 0;
+ soft->ftop = 0; /* We don't keep top in the status word internally. */
+ soft->twd = 0xffff;
/* The behaviour is different from that detailed in
Section 15.1.6 of the Intel manual */
- operand_address.offset = 0;
- operand_address.selector = 0;
- instruction_address.offset = 0;
- instruction_address.selector = 0;
- instruction_address.opcode = 0;
- no_ip_update = 1;
+ oaddr = (struct address *)&soft->foo;
+ oaddr->offset = 0;
+ oaddr->selector = 0;
+ iaddr = (struct address *)&soft->fip;
+ iaddr->offset = 0;
+ iaddr->selector = 0;
+ iaddr->opcode = 0;
+ soft->no_update = 1;
+}
+
+void finit(void)
+{
+ finit_task(current);
}
/*
pos = start_pfn << PAGE_SHIFT;
end_pfn = ((pos + (PMD_SIZE - 1)) >> PMD_SHIFT)
<< (PMD_SHIFT - PAGE_SHIFT);
+ if (end_pfn > (end >> PAGE_SHIFT))
+ end_pfn = end >> PAGE_SHIFT;
if (start_pfn < end_pfn) {
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
pos = end_pfn << PAGE_SHIFT;
#include <asm/pat.h>
#include <linux/module.h>
+int is_io_mapping_possible(resource_size_t base, unsigned long size)
+{
+#ifndef CONFIG_X86_PAE
+ /* There is no way to map greater than 1 << 32 address without PAE */
+ if (base + size > 0x100000000ULL)
+ return 0;
+#endif
+ return 1;
+}
+EXPORT_SYMBOL_GPL(is_io_mapping_possible);
+
/* Map 'pfn' using fixed map 'type' and protections 'prot'
*/
void *
struct list_head list;
struct kmmio_fault_page *release_next;
unsigned long page; /* location of the fault page */
+ bool old_presence; /* page presence prior to arming */
+ bool armed;
/*
* Number of times this page has been registered as a part
* of a probe. If zero, page is disarmed and this may be freed.
- * Used only by writers (RCU).
+ * Used only by writers (RCU) and post_kmmio_handler().
+ * Protected by kmmio_lock, when linked into kmmio_page_table.
*/
int count;
};
return NULL;
}
-static void set_page_present(unsigned long addr, bool present,
- unsigned int *pglevel)
+static void set_pmd_presence(pmd_t *pmd, bool present, bool *old)
+{
+ pmdval_t v = pmd_val(*pmd);
+ *old = !!(v & _PAGE_PRESENT);
+ v &= ~_PAGE_PRESENT;
+ if (present)
+ v |= _PAGE_PRESENT;
+ set_pmd(pmd, __pmd(v));
+}
+
+static void set_pte_presence(pte_t *pte, bool present, bool *old)
+{
+ pteval_t v = pte_val(*pte);
+ *old = !!(v & _PAGE_PRESENT);
+ v &= ~_PAGE_PRESENT;
+ if (present)
+ v |= _PAGE_PRESENT;
+ set_pte_atomic(pte, __pte(v));
+}
+
+static int set_page_presence(unsigned long addr, bool present, bool *old)
{
- pteval_t pteval;
- pmdval_t pmdval;
unsigned int level;
- pmd_t *pmd;
pte_t *pte = lookup_address(addr, &level);
if (!pte) {
pr_err("kmmio: no pte for page 0x%08lx\n", addr);
- return;
+ return -1;
}
- if (pglevel)
- *pglevel = level;
-
switch (level) {
case PG_LEVEL_2M:
- pmd = (pmd_t *)pte;
- pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT;
- if (present)
- pmdval |= _PAGE_PRESENT;
- set_pmd(pmd, __pmd(pmdval));
+ set_pmd_presence((pmd_t *)pte, present, old);
break;
-
case PG_LEVEL_4K:
- pteval = pte_val(*pte) & ~_PAGE_PRESENT;
- if (present)
- pteval |= _PAGE_PRESENT;
- set_pte_atomic(pte, __pte(pteval));
+ set_pte_presence(pte, present, old);
break;
-
default:
pr_err("kmmio: unexpected page level 0x%x.\n", level);
- return;
+ return -1;
}
__flush_tlb_one(addr);
+ return 0;
}
-/** Mark the given page as not present. Access to it will trigger a fault. */
-static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+/*
+ * Mark the given page as not present. Access to it will trigger a fault.
+ *
+ * Struct kmmio_fault_page is protected by RCU and kmmio_lock, but the
+ * protection is ignored here. RCU read lock is assumed held, so the struct
+ * will not disappear unexpectedly. Furthermore, the caller must guarantee,
+ * that double arming the same virtual address (page) cannot occur.
+ *
+ * Double disarming on the other hand is allowed, and may occur when a fault
+ * and mmiotrace shutdown happen simultaneously.
+ */
+static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
{
- set_page_present(page & PAGE_MASK, false, pglevel);
+ int ret;
+ WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
+ if (f->armed) {
+ pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
+ f->page, f->count, f->old_presence);
+ }
+ ret = set_page_presence(f->page, false, &f->old_presence);
+ WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
+ f->armed = true;
+ return ret;
}
-/** Mark the given page as present. */
-static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+/** Restore the given page to saved presence state. */
+static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
{
- set_page_present(page & PAGE_MASK, true, pglevel);
+ bool tmp;
+ int ret = set_page_presence(f->page, f->old_presence, &tmp);
+ WARN_ONCE(ret < 0,
+ KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page);
+ f->armed = false;
}
/*
ctx = &get_cpu_var(kmmio_ctx);
if (ctx->active) {
- disarm_kmmio_fault_page(faultpage->page, NULL);
if (addr == ctx->addr) {
/*
- * On SMP we sometimes get recursive probe hits on the
- * same address. Context is already saved, fall out.
+ * A second fault on the same page means some other
+ * condition needs handling by do_page_fault(), the
+ * page really not being present is the most common.
*/
- pr_debug("kmmio: duplicate probe hit on CPU %d, for "
- "address 0x%08lx.\n",
- smp_processor_id(), addr);
- ret = 1;
- goto no_kmmio_ctx;
- }
- /*
- * Prevent overwriting already in-flight context.
- * This should not happen, let's hope disarming at least
- * prevents a panic.
- */
- pr_emerg("kmmio: recursive probe hit on CPU %d, "
+ pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
+ addr, smp_processor_id());
+
+ if (!faultpage->old_presence)
+ pr_info("kmmio: unexpected secondary hit for "
+ "address 0x%08lx on CPU %d.\n", addr,
+ smp_processor_id());
+ } else {
+ /*
+ * Prevent overwriting already in-flight context.
+ * This should not happen, let's hope disarming at
+ * least prevents a panic.
+ */
+ pr_emerg("kmmio: recursive probe hit on CPU %d, "
"for address 0x%08lx. Ignoring.\n",
smp_processor_id(), addr);
- pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
- ctx->addr);
+ pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
+ ctx->addr);
+ disarm_kmmio_fault_page(faultpage);
+ }
goto no_kmmio_ctx;
}
ctx->active++;
regs->flags &= ~X86_EFLAGS_IF;
/* Now we set present bit in PTE and single step. */
- disarm_kmmio_fault_page(ctx->fpage->page, NULL);
+ disarm_kmmio_fault_page(ctx->fpage);
/*
* If another cpu accesses the same page while we are stepping,
struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
if (!ctx->active) {
- pr_debug("kmmio: spurious debug trap on CPU %d.\n",
+ pr_warning("kmmio: spurious debug trap on CPU %d.\n",
smp_processor_id());
goto out;
}
if (ctx->probe && ctx->probe->post_handler)
ctx->probe->post_handler(ctx->probe, condition, regs);
- arm_kmmio_fault_page(ctx->fpage->page, NULL);
+ /* Prevent racing against release_kmmio_fault_page(). */
+ spin_lock(&kmmio_lock);
+ if (ctx->fpage->count)
+ arm_kmmio_fault_page(ctx->fpage);
+ spin_unlock(&kmmio_lock);
regs->flags &= ~X86_EFLAGS_TF;
regs->flags |= ctx->saved_flags;
f = get_kmmio_fault_page(page);
if (f) {
if (!f->count)
- arm_kmmio_fault_page(f->page, NULL);
+ arm_kmmio_fault_page(f);
f->count++;
return 0;
}
- f = kmalloc(sizeof(*f), GFP_ATOMIC);
+ f = kzalloc(sizeof(*f), GFP_ATOMIC);
if (!f)
return -1;
f->count = 1;
f->page = page;
- list_add_rcu(&f->list, kmmio_page_list(f->page));
- arm_kmmio_fault_page(f->page, NULL);
+ if (arm_kmmio_fault_page(f)) {
+ kfree(f);
+ return -1;
+ }
+
+ list_add_rcu(&f->list, kmmio_page_list(f->page));
return 0;
}
f->count--;
BUG_ON(f->count < 0);
if (!f->count) {
- disarm_kmmio_fault_page(f->page, NULL);
+ disarm_kmmio_fault_page(f);
f->release_next = *release_list;
*release_list = f;
}
static void remove_kmmio_fault_pages(struct rcu_head *head)
{
- struct kmmio_delayed_release *dr = container_of(
- head,
- struct kmmio_delayed_release,
- rcu);
+ struct kmmio_delayed_release *dr =
+ container_of(head, struct kmmio_delayed_release, rcu);
struct kmmio_fault_page *p = dr->release_list;
struct kmmio_fault_page **prevp = &dr->release_list;
unsigned long flags;
+
spin_lock_irqsave(&kmmio_lock, flags);
while (p) {
- if (!p->count)
+ if (!p->count) {
list_del_rcu(&p->list);
- else
+ prevp = &p->release_next;
+ } else {
*prevp = p->release_next;
- prevp = &p->release_next;
+ }
p = p->release_next;
}
spin_unlock_irqrestore(&kmmio_lock, flags);
+
/* This is the real RCU destroy call. */
call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
}
* primary protection behavior:
*/
__set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
+
+ /*
+ * Intel Atom errata AAH41 workaround.
+ *
+ * The real fix should be in hw or in a microcode update, but
+ * we also probabilistically try to reduce the window of having
+ * a large TLB mixed with 4K TLBs while instruction fetches are
+ * going on.
+ */
+ __flush_tlb_all();
+
base = NULL;
out_unlock:
#include <linux/bootmem.h>
#include <linux/debugfs.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/fs.h>
else
return pgprot_noncached(prot);
}
+EXPORT_SYMBOL_GPL(pgprot_writecombine);
#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
/*
- * Written by Pekka Paalanen, 2008 <pq@iki.fi>
+ * Written by Pekka Paalanen, 2008
-2009 <pq@iki.fi>
*/
#include <linux/module.h>
#include <linux/io.h>
static unsigned long mmio_address;
module_param(mmio_address, ulong, 0);
-MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB.");
+MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB "
+ "(or 8 MB if read_far is non-zero).");
+
+static unsigned long read_far = 0x400100;
+module_param(read_far, ulong, 0);
+MODULE_PARM_DESC(read_far, " Offset of a 32-bit read within 8 MB "
+ "(default: 0x400100).");
+
+static unsigned v16(unsigned i)
+{
+ return i * 12 + 7;
+}
+
+static unsigned v32(unsigned i)
+{
+ return i * 212371 + 13;
+}
static void do_write_test(void __iomem *p)
{
unsigned int i;
+ pr_info(MODULE_NAME ": write test.\n");
mmiotrace_printk("Write test.\n");
+
for (i = 0; i < 256; i++)
iowrite8(i, p + i);
+
for (i = 1024; i < (5 * 1024); i += 2)
- iowrite16(i * 12 + 7, p + i);
+ iowrite16(v16(i), p + i);
+
for (i = (5 * 1024); i < (16 * 1024); i += 4)
- iowrite32(i * 212371 + 13, p + i);
+ iowrite32(v32(i), p + i);
}
static void do_read_test(void __iomem *p)
{
unsigned int i;
+ unsigned errs[3] = { 0 };
+ pr_info(MODULE_NAME ": read test.\n");
mmiotrace_printk("Read test.\n");
+
for (i = 0; i < 256; i++)
- ioread8(p + i);
+ if (ioread8(p + i) != i)
+ ++errs[0];
+
for (i = 1024; i < (5 * 1024); i += 2)
- ioread16(p + i);
+ if (ioread16(p + i) != v16(i))
+ ++errs[1];
+
for (i = (5 * 1024); i < (16 * 1024); i += 4)
- ioread32(p + i);
+ if (ioread32(p + i) != v32(i))
+ ++errs[2];
+
+ mmiotrace_printk("Read errors: 8-bit %d, 16-bit %d, 32-bit %d.\n",
+ errs[0], errs[1], errs[2]);
}
-static void do_test(void)
+static void do_read_far_test(void __iomem *p)
{
- void __iomem *p = ioremap_nocache(mmio_address, 0x4000);
+ pr_info(MODULE_NAME ": read far test.\n");
+ mmiotrace_printk("Read far test.\n");
+
+ ioread32(p + read_far);
+}
+
+static void do_test(unsigned long size)
+{
+ void __iomem *p = ioremap_nocache(mmio_address, size);
if (!p) {
pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
return;
mmiotrace_printk("ioremap returned %p.\n", p);
do_write_test(p);
do_read_test(p);
+ if (read_far && read_far < size - 4)
+ do_read_far_test(p);
iounmap(p);
}
static int __init init(void)
{
+ unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
+
if (mmio_address == 0) {
pr_err(MODULE_NAME ": you have to use the module argument "
"mmio_address.\n");
return -ENXIO;
}
- pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx "
- "in PCI address space, and writing "
- "rubbish in there.\n", mmio_address);
- do_test();
+ pr_warning(MODULE_NAME ": WARNING: mapping %lu kB @ 0x%08lx in PCI "
+ "address space, and writing 16 kB of rubbish in there.\n",
+ size >> 10, mmio_address);
+ do_test(size);
+ pr_info(MODULE_NAME ": All done.\n");
return 0;
}
if (cpu_has_arch_perfmon) {
union cpuid10_eax eax;
eax.full = cpuid_eax(0xa);
- if (counter_width < eax.split.bit_width)
- counter_width = eax.split.bit_width;
+
+ /*
+ * For Core2 (family 6, model 15), don't reset the
+ * counter width:
+ */
+ if (!(eax.split.version_id == 0 &&
+ current_cpu_data.x86 == 6 &&
+ current_cpu_data.x86_model == 15)) {
+
+ if (counter_width < eax.split.bit_width)
+ counter_width = eax.split.bit_width;
+ }
}
/* clear all counters */
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
+ local_irq_disable();
+ early_boot_irqs_off();
+
xen_raw_console_write("mapping kernel into physical memory\n");
pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
help
Can we use information of configuration file?
-config HIGHMEM
- bool "High memory support"
-
endmenu
menu "Platform options"
#include <asm/setup.h>
#include <asm/param.h>
+#include <platform/hardware.h>
+
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
#endif
#include <linux/stringify.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <asm/ptrace.h>
#include <asm/timex.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/hardirq.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/hardirq.h>
}
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
{
char buf[2];
- if (!tty)
- return;
-
buf[0] = ch;
buf[1] = '\0'; /* Is this NULL necessary? */
__simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+ return 1;
}
static void rs_flush_chars(struct tty_struct *tty)
}
}
-void blk_recalc_rq_segments(struct request *rq)
+static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
+ struct bio *bio)
{
- int nr_phys_segs;
unsigned int phys_size;
struct bio_vec *bv, *bvprv = NULL;
- int seg_size;
- int cluster;
- struct req_iterator iter;
- int high, highprv = 1;
- struct request_queue *q = rq->q;
+ int cluster, i, high, highprv = 1;
+ unsigned int seg_size, nr_phys_segs;
+ struct bio *fbio, *bbio;
- if (!rq->bio)
- return;
+ if (!bio)
+ return 0;
+ fbio = bio;
cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
seg_size = 0;
phys_size = nr_phys_segs = 0;
- rq_for_each_segment(bv, rq, iter) {
- /*
- * the trick here is making sure that a high page is never
- * considered part of another segment, since that might
- * change with the bounce page.
- */
- high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
- if (high || highprv)
- goto new_segment;
- if (cluster) {
- if (seg_size + bv->bv_len > q->max_segment_size)
- goto new_segment;
- if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
- goto new_segment;
- if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+ for_each_bio(bio) {
+ bio_for_each_segment(bv, bio, i) {
+ /*
+ * the trick here is making sure that a high page is
+ * never considered part of another segment, since that
+ * might change with the bounce page.
+ */
+ high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
+ if (high || highprv)
goto new_segment;
+ if (cluster) {
+ if (seg_size + bv->bv_len > q->max_segment_size)
+ goto new_segment;
+ if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
+ goto new_segment;
+ if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+ goto new_segment;
+
+ seg_size += bv->bv_len;
+ bvprv = bv;
+ continue;
+ }
+new_segment:
+ if (nr_phys_segs == 1 && seg_size >
+ fbio->bi_seg_front_size)
+ fbio->bi_seg_front_size = seg_size;
- seg_size += bv->bv_len;
+ nr_phys_segs++;
bvprv = bv;
- continue;
+ seg_size = bv->bv_len;
+ highprv = high;
}
-new_segment:
- if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
- rq->bio->bi_seg_front_size = seg_size;
-
- nr_phys_segs++;
- bvprv = bv;
- seg_size = bv->bv_len;
- highprv = high;
+ bbio = bio;
}
- if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
- rq->bio->bi_seg_front_size = seg_size;
- if (seg_size > rq->biotail->bi_seg_back_size)
- rq->biotail->bi_seg_back_size = seg_size;
+ if (nr_phys_segs == 1 && seg_size > fbio->bi_seg_front_size)
+ fbio->bi_seg_front_size = seg_size;
+ if (seg_size > bbio->bi_seg_back_size)
+ bbio->bi_seg_back_size = seg_size;
+
+ return nr_phys_segs;
+}
- rq->nr_phys_segments = nr_phys_segs;
+void blk_recalc_rq_segments(struct request *rq)
+{
+ rq->nr_phys_segments = __blk_recalc_rq_segments(rq->q, rq->bio);
}
void blk_recount_segments(struct request_queue *q, struct bio *bio)
{
- struct request rq;
struct bio *nxt = bio->bi_next;
- rq.q = q;
- rq.bio = rq.biotail = bio;
+
bio->bi_next = NULL;
- blk_recalc_rq_segments(&rq);
+ bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio);
bio->bi_next = nxt;
- bio->bi_phys_segments = rq.nr_phys_segments;
bio->bi_flags |= (1 << BIO_SEG_VALID);
}
EXPORT_SYMBOL(blk_recount_segments);
}
#endif /* CONFIG_PROC_FS */
+/**
+ * register_blkdev - register a new block device
+ *
+ * @major: the requested major device number [1..255]. If @major=0, try to
+ * allocate any unused major number.
+ * @name: the name of the new block device as a zero terminated string
+ *
+ * The @name must be unique within the system.
+ *
+ * The return value depends on the @major input parameter.
+ * - if a major device number was requested in range [1..255] then the
+ * function returns zero on success, or a negative error code
+ * - if any unused major number was requested with @major=0 parameter
+ * then the return value is the allocated major number in range
+ * [1..255] or a negative error code otherwise
+ */
int register_blkdev(unsigned int major, const char *name)
{
struct blk_major_name **n, *p;
mask &= ~(CRYPTO_ALG_LARVAL | CRYPTO_ALG_DEAD);
type &= mask;
- alg = try_then_request_module(crypto_alg_lookup(name, type, mask),
- name);
+ alg = crypto_alg_lookup(name, type, mask);
+ if (!alg) {
+ char tmp[CRYPTO_MAX_ALG_NAME];
+
+ request_module(name);
+
+ if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+ snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
+ request_module(tmp);
+
+ alg = crypto_alg_lookup(name, type, mask);
+ }
+
if (alg)
return crypto_is_larval(alg) ? crypto_larval_wait(alg) : alg;
{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
{
if (ata_id_has_lba(id)) {
if (ata_id_has_lba48(id))
- return ata_id_u64(id, 100);
+ return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
else
- return ata_id_u32(id, 60);
+ return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
} else {
if (ata_id_current_chs_valid(id))
- return ata_id_u32(id, 57);
+ return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+ id[ATA_ID_CUR_SECTORS];
else
- return id[1] * id[3] * id[6];
+ return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+ id[ATA_ID_SECTORS];
}
}
VPRINTK("unmapping %u sg elements\n", qc->n_elem);
if (qc->n_elem)
- dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+ dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
qc->flags &= ~ATA_QCFLAG_DMAMAP;
qc->sg = NULL;
return -1;
DPRINTK("%d sg elements mapped\n", n_elem);
-
+ qc->orig_n_elem = qc->n_elem;
qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
}
/* prereset() might have cleared ATA_EH_RESET. If so,
- * bang classes and return.
+ * bang classes, thaw and return.
*/
if (reset && !(ehc->i.action & ATA_EH_RESET)) {
ata_for_each_dev(dev, link, ALL)
classes[dev->devno] = ATA_DEV_NONE;
+ if ((ap->pflags & ATA_PFLAG_FROZEN) &&
+ ata_is_host_link(link))
+ ata_eh_thaw_port(ap);
rc = 0;
goto out;
}
int i;
for (i = 0; i < ATA_EH_UA_TRIES; i++) {
- u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
+ u8 *sense_buffer = dev->link->ap->sector_buf;
u8 sense_key = 0;
unsigned int err_mask;
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.11"
+#define DRV_VERSION "0.4.1"
/**
* timing_setup - shared timing computation and load
return ata_sff_prereset(link, deadline);
}
+/**
+ * amd_cable_detect - report cable type
+ * @ap: port
+ *
+ * AMD controller/BIOS setups record the cable type in word 0x42
+ */
+
static int amd_cable_detect(struct ata_port *ap)
{
static const u32 bitmask[2] = {0x03, 0x0C};
return ATA_CBL_PATA40;
}
+/**
+ * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Set the PCI fifo for this device according to the devices present
+ * on the bus at this point in time. We need to turn the post write buffer
+ * off for ATAPI devices as we may need to issue a word sized write to the
+ * device as the final I/O
+ */
+
+static void amd_fifo_setup(struct ata_port *ap)
+{
+ struct ata_device *adev;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ static const u8 fifobit[2] = { 0xC0, 0x30};
+ u8 fifo = fifobit[ap->port_no];
+ u8 r;
+
+
+ ata_for_each_dev(adev, &ap->link, ENABLED) {
+ if (adev->class == ATA_DEV_ATAPI)
+ fifo = 0;
+ }
+ if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */
+ fifo = 0;
+
+ /* On the later chips the read prefetch bits become no-op bits */
+ pci_read_config_byte(pdev, 0x41, &r);
+ r &= ~fifobit[ap->port_no];
+ r |= fifo;
+ pci_write_config_byte(pdev, 0x41, r);
+}
+
/**
* amd33_set_piomode - set initial PIO mode data
* @ap: ATA interface
static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ amd_fifo_setup(ap);
timing_setup(ap, adev, 0x40, adev->pio_mode, 1);
}
static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ amd_fifo_setup(ap);
timing_setup(ap, adev, 0x40, adev->pio_mode, 2);
}
static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ amd_fifo_setup(ap);
timing_setup(ap, adev, 0x40, adev->pio_mode, 3);
}
static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ amd_fifo_setup(ap);
timing_setup(ap, adev, 0x40, adev->pio_mode, 4);
}
.set_dmamode = nv133_set_dmamode,
};
+static void amd_clear_fifo(struct pci_dev *pdev)
+{
+ u8 fifo;
+ /* Disable the FIFO, the FIFO logic will re-enable it as
+ appropriate */
+ pci_read_config_byte(pdev, 0x41, &fifo);
+ fifo &= 0x0F;
+ pci_write_config_byte(pdev, 0x41, fifo);
+}
+
static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info[10] = {
if (type < 3)
ata_pci_bmdma_clear_simplex(pdev);
-
- /* Check for AMD7411 */
- if (type == 3)
- /* FIFO is broken */
- pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
- else
- pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
-
+ if (pdev->vendor == PCI_VENDOR_ID_AMD)
+ amd_clear_fifo(pdev);
/* Cable detection on Nvidia chips doesn't work too well,
* cache BIOS programmed UDMA mode.
*/
return rc;
if (pdev->vendor == PCI_VENDOR_ID_AMD) {
- u8 fifo;
- pci_read_config_byte(pdev, 0x41, &fifo);
- if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
- /* FIFO is broken */
- pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
- else
- pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
+ amd_clear_fifo(pdev);
if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
ata_pci_bmdma_clear_simplex(pdev);
}
-
ata_host_resume(host);
return 0;
}
id[83] |= 0x4400; /* Word 83 is valid and LBA48 */
id[86] |= 0x0400; /* LBA48 on */
id[ATA_ID_MAJOR_VER] |= 0x1F;
+ /* Clear the serial number because it's different each boot
+ which breaks validation on resume */
+ memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN);
}
return err_mask;
}
static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw)
{
- if (ata_id_has_dword_io(dev->id)) {
+ int slop = buflen & 3;
+ /* 32bit I/O capable *and* we need to write a whole number of dwords */
+ if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
struct ata_port *ap = dev->link->ap;
- int slop = buflen & 3;
unsigned long flags;
local_irq_save(flags);
struct ata_port *ap = adev->link->ap;
int slop = buflen & 3;
- if (ata_id_has_dword_io(adev->id)) {
+ if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
if (rw == WRITE)
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
else
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- if (!IS_SOC(hpriv)) {
- /* Clear any currently outstanding host interrupt conditions */
- writelfl(0, mmio + hpriv->irq_cause_ofs);
+ /* Clear any currently outstanding host interrupt conditions */
+ writelfl(0, mmio + hpriv->irq_cause_ofs);
- /* and unmask interrupt generation for host regs */
- writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
+ /* and unmask interrupt generation for host regs */
+ writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
- /*
- * enable only global host interrupts for now.
- * The per-port interrupts get done later as ports are set up.
- */
- mv_set_main_irq_mask(host, 0, PCI_ERR);
- }
+ /*
+ * enable only global host interrupts for now.
+ * The per-port interrupts get done later as ports are set up.
+ */
+ mv_set_main_irq_mask(host, 0, PCI_ERR);
done:
return rc;
}
module_init(nv_init);
module_exit(nv_exit);
module_param_named(adma, adma_enabled, bool, 0444);
-MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
module_param_named(swncq, swncq_enabled, bool, 0444);
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
sect_start_pfn = section_nr_to_pfn(mem_blk->phys_index);
sect_end_pfn = sect_start_pfn + PAGES_PER_SECTION - 1;
for (pfn = sect_start_pfn; pfn <= sect_end_pfn; pfn++) {
- unsigned int nid;
+ int nid;
nid = get_nid_for_pfn(pfn);
if (nid < 0)
return;
while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
msleep(Sms);
- if (i <= 0) {
+ if (i < 0) {
printk(KERN_ERR
"aoe: %s holds ref: %s\n",
skb->dev ? skb->dev->name : "netif",
if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
return -ENODEV;
- /* Some devices (notably the HP Smart Array 5i Controller)
- need a little pause here */
- schedule_timeout_uninterruptible(30*HZ);
-
- /* Now try to get the controller to respond to a no-op */
- for (i=0; i<12; i++) {
+ /* Now try to get the controller to respond to a no-op. Some
+ devices (notably the HP Smart Array 5i Controller) need
+ up to 30 seconds to respond. */
+ for (i=0; i<30; i++) {
if (cciss_noop(pdev) == 0)
break;
- else
- printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : ""));
+
+ schedule_timeout_uninterruptible(HZ);
+ }
+ if (i == 30) {
+ printk(KERN_ERR "cciss: controller seems dead\n");
+ return -EBUSY;
}
}
struct loop_device *lo = p->lo;
struct page *page = buf->page;
sector_t IV;
- size_t size;
- int ret;
+ int size, ret;
ret = buf->ops->confirm(pipe, buf);
if (unlikely(ret))
#include <linux/hdreg.h>
#include <linux/cdrom.h>
#include <linux/module.h>
+#include <linux/scatterlist.h>
#include <xen/xenbus.h>
#include <xen/grant_table.h>
enum blkif_state connected;
int ring_ref;
struct blkif_front_ring ring;
+ struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
unsigned int evtchn, irq;
struct request_queue *rq;
struct work_struct work;
struct blkfront_info *info = req->rq_disk->private_data;
unsigned long buffer_mfn;
struct blkif_request *ring_req;
- struct req_iterator iter;
- struct bio_vec *bvec;
unsigned long id;
unsigned int fsect, lsect;
- int ref;
+ int i, ref;
grant_ref_t gref_head;
+ struct scatterlist *sg;
if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
return 1;
if (blk_barrier_rq(req))
ring_req->operation = BLKIF_OP_WRITE_BARRIER;
- ring_req->nr_segments = 0;
- rq_for_each_segment(bvec, req, iter) {
- BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST);
- buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
- fsect = bvec->bv_offset >> 9;
- lsect = fsect + (bvec->bv_len >> 9) - 1;
+ ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+ BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
+ for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+ buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+ fsect = sg->offset >> 9;
+ lsect = fsect + (sg->length >> 9) - 1;
/* install a grant reference. */
ref = gnttab_claim_grant_reference(&gref_head);
BUG_ON(ref == -ENOSPC);
buffer_mfn,
rq_data_dir(req) );
- info->shadow[id].frame[ring_req->nr_segments] =
- mfn_to_pfn(buffer_mfn);
-
- ring_req->seg[ring_req->nr_segments] =
+ info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+ ring_req->seg[i] =
(struct blkif_request_segment) {
.gref = ref,
.first_sect = fsect,
.last_sect = lsect };
-
- ring_req->nr_segments++;
}
info->ring.req_prod_pvt++;
SHARED_RING_INIT(sring);
FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
+ sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
if (err < 0) {
free_page((unsigned long)sring);
break;
case XenbusStateClosing:
+ if (info->gd == NULL)
+ xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
bd = bdget_disk(info->gd, 0);
if (bd == NULL)
xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
nb_order = (nb_order >> 1) & 7;
pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
nb_aper = nb_base << 25;
- if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
- return 0;
- }
/* Northbridge seems to contain crap. Try the AGP bridge. */
pci_read_config_word(agp, cap+0x14, &apsize);
- if (apsize == 0xffff)
+ if (apsize == 0xffff) {
+ if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+ return 0;
return -1;
+ }
apsize &= 0xfff;
/* Some BIOS use weird encodings not in the AGPv3 table. */
order = nb_order;
}
+ if (nb_order >= order) {
+ if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+ return 0;
+ }
+
dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
aper, 32 << order);
if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
break;
}
}
- if (gtt_entries > 0)
+ if (gtt_entries > 0) {
dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
gtt_entries / KB(1), local ? "local" : "stolen");
- else
+ gtt_entries /= KB(4);
+ } else {
dev_info(&agp_bridge->dev->dev,
"no pre-allocated video memory detected\n");
- gtt_entries /= KB(4);
+ gtt_entries = 0;
+ }
intel_private.gtt_entries = gtt_entries;
}
hvcsd->tty = tty;
tty->driver_data = hvcsd;
- /*
- * Set this driver to low latency so that we actually have a chance at
- * catching a throttled TTY after we flip_buffer_push. Otherwise the
- * flush_to_async may not execute until after the kernel_thread has
- * yielded and resumed the next flip_buffer_push resulting in data
- * loss.
- */
- tty->low_latency = 1;
-
memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
/*
hp = &hvsi_ports[line];
tty->driver_data = hp;
- tty->low_latency = 1; /* avoid throttle/tty_flip_buffer_push race */
mb();
if (hp->state == HVSI_FSP_DIED)
.release = cpufreq_sysfs_release,
};
-static struct kobj_type ktype_empty_cpufreq = {
- .sysfs_ops = &sysfs_ops,
- .release = cpufreq_sysfs_release,
-};
-
/**
* cpufreq_add_dev - add a CPU device
memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
/* prepare interface data */
- if (!cpufreq_driver->hide_interface) {
- ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
- &sys_dev->kobj, "cpufreq");
+ ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
+ "cpufreq");
+ if (ret)
+ goto err_out_driver_exit;
+
+ /* set up files for this cpu device */
+ drv_attr = cpufreq_driver->attr;
+ while ((drv_attr) && (*drv_attr)) {
+ ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
if (ret)
goto err_out_driver_exit;
-
- /* set up files for this cpu device */
- drv_attr = cpufreq_driver->attr;
- while ((drv_attr) && (*drv_attr)) {
- ret = sysfs_create_file(&policy->kobj,
- &((*drv_attr)->attr));
- if (ret)
- goto err_out_driver_exit;
- drv_attr++;
- }
- if (cpufreq_driver->get) {
- ret = sysfs_create_file(&policy->kobj,
- &cpuinfo_cur_freq.attr);
- if (ret)
- goto err_out_driver_exit;
- }
- if (cpufreq_driver->target) {
- ret = sysfs_create_file(&policy->kobj,
- &scaling_cur_freq.attr);
- if (ret)
- goto err_out_driver_exit;
- }
- } else {
- ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq,
- &sys_dev->kobj, "cpufreq");
+ drv_attr++;
+ }
+ if (cpufreq_driver->get) {
+ ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+ if (ret)
+ goto err_out_driver_exit;
+ }
+ if (cpufreq_driver->target) {
+ ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
if (ret)
goto err_out_driver_exit;
}
if (!ctx_pool) {
goto err;
}
- ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0);
+ ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0,
+ "ixp_crypto:out", NULL);
if (ret)
goto err;
- ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0);
+ ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0,
+ "ixp_crypto:in", NULL);
if (ret) {
qmgr_release_queue(SEND_QID);
goto err;
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-all");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("sha1");
-MODULE_ALIAS("sha256");
+MODULE_ALIAS("sha1-all");
+MODULE_ALIAS("sha256-all");
MODULE_ALIAS("sha1-padlock");
MODULE_ALIAS("sha256-padlock");
/*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
static void __exit dmatest_exit(void)
{
struct dmatest_chan *dtc, *_dtc;
+ struct dma_chan *chan;
list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
list_del(&dtc->node);
+ chan = dtc->chan;
dmatest_cleanup_channel(dtc);
pr_debug("dmatest: dropped channel %s\n",
- dma_chan_name(dtc->chan));
- dma_release_channel(dtc->chan);
+ dma_chan_name(chan));
+ dma_release_channel(chan);
}
}
module_exit(dmatest_exit);
static void dma_halt(struct fsl_dma_chan *fsl_chan)
{
- int i = 0;
+ int i;
+
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
32);
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
| FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
- while (!dma_is_idle(fsl_chan) && (i++ < 100))
+ for (i = 0; i < 100; i++) {
+ if (dma_is_idle(fsl_chan))
+ break;
udelay(10);
+ }
if (i >= 100 && !dma_is_idle(fsl_chan))
dev_err(fsl_chan->dev, "DMA halt timeout!\n");
}
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
#define DCA_TAG_MAP_MASK 0xDF
+/* expected tag map bytes for I/OAT ver.2 */
+#define DCA2_TAG_MAP_BYTE0 0x80
+#define DCA2_TAG_MAP_BYTE1 0x0
+#define DCA2_TAG_MAP_BYTE2 0x81
+#define DCA2_TAG_MAP_BYTE3 0x82
+#define DCA2_TAG_MAP_BYTE4 0x82
+
+/* verify if tag map matches expected values */
+static inline int dca2_tag_map_valid(u8 *tag_map)
+{
+ return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+ (tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+ (tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+ (tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+ (tag_map[4] == DCA2_TAG_MAP_BYTE4));
+}
+
/*
* "Legacy" DCA systems do not implement the DCA register set in the
* I/OAT device. Software needs direct support for their tag mappings.
ioatdca->tag_map[i] = 0;
}
+ if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+ dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+ "disabling DCA\n");
+ free_dca_provider(dca);
+ return NULL;
+ }
+
err = register_dca_provider(dca, &pdev->dev);
if (err) {
free_dca_provider(dca);
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2004 - 2007 Intel Corporation.
+ * Copyright(c) 2004 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
ioat_chan->xfercap = xfercap;
ioat_chan->desccount = 0;
INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
- if (ioat_chan->device->version != IOAT_VER_1_2) {
- writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
- | IOAT_DMA_DCA_ANY_CPU,
- ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
- }
+ if (ioat_chan->device->version == IOAT_VER_2_0)
+ writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
+ IOAT_DMA_DCA_ANY_CPU,
+ ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
+ else if (ioat_chan->device->version == IOAT_VER_3_0)
+ writel(IOAT_DMA_DCA_ANY_CPU,
+ ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
spin_lock_init(&ioat_chan->cleanup_lock);
spin_lock_init(&ioat_chan->desc_lock);
INIT_LIST_HEAD(&ioat_chan->free_desc);
* up if the client is done with the descriptor
*/
if (async_tx_test_ack(&desc->async_tx)) {
- list_del(&desc->node);
- list_add_tail(&desc->node,
- &ioat_chan->free_desc);
+ list_move_tail(&desc->node,
+ &ioat_chan->free_desc);
} else
desc->async_tx.cookie = 0;
} else {
dma_cookie_t cookie;
int err = 0;
struct completion cmp;
+ unsigned long tmo;
src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
if (!src)
}
device->common.device_issue_pending(dma_chan);
- wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
- if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+ if (tmo == 0 ||
+ device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
!= DMA_SUCCESS) {
dev_err(&device->pdev->dev,
"Self-test copy timed out, disabling\n");
" %d channels, device version 0x%02x, driver version %s\n",
device->common.chancnt, device->version, IOAT_DMA_VERSION);
+ if (!device->common.chancnt) {
+ dev_err(&device->pdev->dev,
+ "Intel(R) I/OAT DMA Engine problem found: "
+ "zero channels detected\n");
+ goto err_setup_interrupts;
+ }
+
err = ioat_dma_setup_interrupts(device);
if (err)
goto err_setup_interrupts;
struct dma_chan *chan, *_chan;
struct ioat_dma_chan *ioat_chan;
+ if (device->version != IOAT_VER_3_0)
+ cancel_delayed_work(&device->work);
+
ioat_dma_remove_interrupts(device);
dma_async_device_unregister(&device->common);
pci_release_regions(device->pdev);
pci_disable_device(device->pdev);
- if (device->version != IOAT_VER_3_0) {
- cancel_delayed_work(&device->work);
- }
-
list_for_each_entry_safe(chan, _chan,
&device->common.channels, device_node) {
ioat_chan = to_ioat_chan(chan);
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
#include <linux/pci_ids.h>
#include <net/tcp.h>
-#define IOAT_DMA_VERSION "3.30"
+#define IOAT_DMA_VERSION "3.64"
enum ioat_interrupt {
none = 0,
#ifdef CONFIG_NET_DMA
switch (dev->version) {
case IOAT_VER_1_2:
- case IOAT_VER_3_0:
sysctl_tcp_dma_copybreak = 4096;
break;
case IOAT_VER_2_0:
sysctl_tcp_dma_copybreak = 2048;
break;
+ case IOAT_VER_3_0:
+ sysctl_tcp_dma_copybreak = 262144;
+ break;
}
#endif
}
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
- if (!xor_srcs[src_idx])
- while (src_idx--) {
+ if (!xor_srcs[src_idx]) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
}
dest = alloc_page(GFP_KERNEL);
- if (!dest)
- while (src_idx--) {
+ if (!dest) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
/* Fill in src buffers */
for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
static struct platform_driver iop_adma_driver = {
.probe = iop_adma_probe,
- .remove = iop_adma_remove,
+ .remove = __devexit_p(iop_adma_remove),
.driver = {
.owner = THIS_MODULE,
.name = "iop-adma",
ichan->status = IPU_CHANNEL_READY;
- spin_unlock_irqrestore(ipu->lock, flags);
+ spin_unlock_irqrestore(&ipu->lock, flags);
return 0;
}
for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
- if (!xor_srcs[src_idx])
- while (src_idx--) {
+ if (!xor_srcs[src_idx]) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
}
dest = alloc_page(GFP_KERNEL);
- if (!dest)
- while (src_idx--) {
+ if (!dest) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
/* Fill in src buffers */
for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
static struct platform_driver mv_xor_driver = {
.probe = mv_xor_probe,
- .remove = mv_xor_remove,
+ .remove = __devexit_p(mv_xor_remove),
.driver = {
.owner = THIS_MODULE,
.name = MV_XOR_NAME,
dev->sigdata.lock = NULL;
master->lock.hw_lock = NULL; /* SHM removed */
master->lock.file_priv = NULL;
- wake_up_interruptible(&master->lock.lock_queue);
+ wake_up_interruptible_all(&master->lock.lock_queue);
}
break;
case _DRM_AGP:
kfree(modes);
kfree(enabled);
}
+
+/**
+ * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
+ * @encoder: encoder to test
+ * @crtc: crtc to test
+ *
+ * Return false if @encoder can't be driven by @crtc, true otherwise.
+ */
+static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
+ struct drm_crtc *crtc)
+{
+ struct drm_device *dev;
+ struct drm_crtc *tmp;
+ int crtc_mask = 1;
+
+ WARN(!crtc, "checking null crtc?");
+
+ dev = crtc->dev;
+
+ list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
+ if (tmp == crtc)
+ break;
+ crtc_mask <<= 1;
+ }
+
+ if (encoder->possible_crtcs & crtc_mask)
+ return true;
+ return false;
+}
+
+/*
+ * Check the CRTC we're going to map each output to vs. its current
+ * CRTC. If they don't match, we have to disable the output and the CRTC
+ * since the driver will have to re-route things.
+ */
+static void
+drm_crtc_prepare_encoders(struct drm_device *dev)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ encoder_funcs = encoder->helper_private;
+ /* Disable unused encoders */
+ if (encoder->crtc == NULL)
+ (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+ /* Disable encoders whose CRTC is about to change */
+ if (encoder_funcs->get_crtc &&
+ encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
+ (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+ }
+}
+
/**
* drm_crtc_set_mode - set a mode
* @crtc: CRTC to program
encoder_funcs->prepare(encoder);
}
+ drm_crtc_prepare_encoders(dev);
+
crtc_funcs->prepare(crtc);
/* Set up the DPLL and any encoders state that needs to adjust or depend
struct drm_device *dev;
struct drm_crtc **save_crtcs, *new_crtc;
struct drm_encoder **save_encoders, *new_encoder;
- struct drm_framebuffer *old_fb;
+ struct drm_framebuffer *old_fb = NULL;
bool save_enabled;
bool mode_changed = false;
bool fb_changed = false;
* and then just flip_or_move it */
if (set->crtc->fb != set->fb) {
/* If we have no fb then treat it as a full mode set */
- if (set->crtc->fb == NULL)
+ if (set->crtc->fb == NULL) {
+ DRM_DEBUG("crtc has no fb, full mode set\n");
mode_changed = true;
- else if ((set->fb->bits_per_pixel !=
+ } else if ((set->fb->bits_per_pixel !=
set->crtc->fb->bits_per_pixel) ||
set->fb->depth != set->crtc->fb->depth)
fb_changed = true;
fb_changed = true;
if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
- DRM_DEBUG("modes are different\n");
+ DRM_DEBUG("modes are different, full mode set\n");
drm_mode_debug_printmodeline(&set->crtc->mode);
drm_mode_debug_printmodeline(set->mode);
mode_changed = true;
}
if (new_encoder != connector->encoder) {
+ DRM_DEBUG("encoder changed, full mode switch\n");
mode_changed = true;
connector->encoder = new_encoder;
}
if (set->connectors[ro] == connector)
new_crtc = set->crtc;
}
+
+ /* Make sure the new CRTC will work with the encoder */
+ if (new_crtc &&
+ !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
+ ret = -EINVAL;
+ goto fail_set_mode;
+ }
if (new_crtc != connector->encoder->crtc) {
+ DRM_DEBUG("crtc changed, full mode switch\n");
mode_changed = true;
connector->encoder->crtc = new_crtc;
}
+ DRM_DEBUG("setting connector %d crtc to %p\n",
+ connector->base.id, new_crtc);
}
/* mode_set_base is not a required function */
fail_set_mode:
set->crtc->enabled = save_enabled;
+ set->crtc->fb = old_fb;
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder)
DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
goto bad;
}
- if (edid->revision <= 0 || edid->revision > 3) {
+ if (edid->revision > 3) {
DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision);
goto bad;
}
mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
- mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) |
+ mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) |
pt->vsync_offset_lo);
mode->vsync_end = mode->vsync_start +
- ((pt->vsync_pulse_width_hi << 8) |
+ ((pt->vsync_pulse_width_hi << 4) |
pt->vsync_pulse_width_lo);
mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
mutex_lock(&dev->struct_mutex);
if (file_priv->is_master) {
+ struct drm_master *master = file_priv->master;
struct drm_file *temp;
list_for_each_entry(temp, &dev->filelist, lhead) {
if ((temp->master == file_priv->master) &&
temp->authenticated = 0;
}
+ /**
+ * Since the master is disappearing, so is the
+ * possibility to lock.
+ */
+
+ if (master->lock.hw_lock) {
+ if (dev->sigdata.lock == master->lock.hw_lock)
+ dev->sigdata.lock = NULL;
+ master->lock.hw_lock = NULL;
+ master->lock.file_priv = NULL;
+ wake_up_interruptible_all(&master->lock.lock_queue);
+ }
+
if (file_priv->minor->master == file_priv->master) {
/* drop the reference held my the minor */
drm_master_put(&file_priv->minor->master);
*/
void drm_vblank_put(struct drm_device *dev, int crtc)
{
+ BUG_ON (atomic_read (&dev->vblank_refcount[crtc]) == 0);
+
/* Last user schedules interrupt disable */
if (atomic_dec_and_test(&dev->vblank_refcount[crtc]))
mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ);
* so that interrupts remain enabled in the interim.
*/
if (!dev->vblank_inmodeset[crtc]) {
- dev->vblank_inmodeset[crtc] = 1;
- drm_vblank_get(dev, crtc);
+ dev->vblank_inmodeset[crtc] = 0x1;
+ if (drm_vblank_get(dev, crtc) == 0)
+ dev->vblank_inmodeset[crtc] |= 0x2;
}
}
EXPORT_SYMBOL(drm_vblank_pre_modeset);
if (dev->vblank_inmodeset[crtc]) {
spin_lock_irqsave(&dev->vbl_lock, irqflags);
dev->vblank_disable_allowed = 1;
- dev->vblank_inmodeset[crtc] = 0;
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
- drm_vblank_put(dev, crtc);
+
+ if (dev->vblank_inmodeset[crtc] & 0x2)
+ drm_vblank_put(dev, crtc);
+
+ dev->vblank_inmodeset[crtc] = 0;
}
}
EXPORT_SYMBOL(drm_vblank_post_modeset);
__set_current_state(TASK_INTERRUPTIBLE);
if (!master->lock.hw_lock) {
/* Device has been unregistered */
+ send_sig(SIGTERM, current, 0);
ret = -EINTR;
break;
}
/* Contention */
schedule();
if (signal_pending(current)) {
- ret = -ERESTARTSYS;
+ ret = -EINTR;
break;
}
}
drm_ht_remove(&master->magiclist);
- if (master->lock.hw_lock) {
- if (dev->sigdata.lock == master->lock.hw_lock)
- dev->sigdata.lock = NULL;
- master->lock.hw_lock = NULL;
- master->lock.file_priv = NULL;
- wake_up_interruptible(&master->lock.lock_queue);
- }
-
drm_free(master, sizeof(*master), DRM_MEM_DRIVER);
}
file_priv->minor->master != file_priv->master) {
mutex_lock(&dev->struct_mutex);
file_priv->minor->master = drm_master_get(file_priv->master);
- mutex_lock(&dev->struct_mutex);
+ mutex_unlock(&dev->struct_mutex);
}
return 0;
dev_priv->hws_map.flags = 0;
dev_priv->hws_map.mtrr = 0;
- drm_core_ioremap(&dev_priv->hws_map, dev);
+ drm_core_ioremap_wc(&dev_priv->hws_map, dev);
if (dev_priv->hws_map.handle == NULL) {
i915_dma_cleanup(dev);
dev_priv->status_gfx_addr = 0;
dev_priv->mm.gtt_mapping =
io_mapping_create_wc(dev->agp->base,
dev->agp->agp_info.aper_size * 1024*1024);
+ if (dev_priv->mm.gtt_mapping == NULL) {
+ ret = -EIO;
+ goto out_rmmap;
+ }
+
/* Set up a WC MTRR for non-PAT systems. This is more common than
* one would think, because the kernel disables PAT on first
* generation Core chips because WC PAT gets overridden by a UC
1024 * 1024,
MTRR_TYPE_WRCOMB, 1);
if (dev_priv->mm.gtt_mtrr < 0) {
- DRM_INFO("MTRR allocation failed\n. Graphics "
+ DRM_INFO("MTRR allocation failed. Graphics "
"performance may suffer.\n");
}
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret != 0)
- goto out_rmmap;
+ goto out_iomapfree;
}
/* On the 945G/GM, the chipset reports the MSI capability on the
return 0;
+out_iomapfree:
+ io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
iounmap(dev_priv->regs);
free_priv:
u8 saveAR_INDEX;
u8 saveAR[21];
u8 saveDACMASK;
- u8 saveDACDATA[256*3]; /* 256 3-byte colors */
u8 saveCR[37];
struct {
/** for phy allocated objects */
struct drm_i915_gem_phys_object *phys_obj;
+
+ /**
+ * Used for checking the object doesn't appear more than once
+ * in an execbuffer object list.
+ */
+ int in_execbuffer;
};
/**
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int regnum = obj_priv->fence_reg;
int tile_width;
- uint32_t val;
+ uint32_t fence_reg, val;
uint32_t pitch_val;
if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
val |= pitch_val << I830_FENCE_PITCH_SHIFT;
val |= I830_FENCE_REG_VALID;
- I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val);
+ if (regnum < 8)
+ fence_reg = FENCE_REG_830_0 + (regnum * 4);
+ else
+ fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4);
+ I915_WRITE(fence_reg, val);
}
static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
struct drm_i915_fence_reg *reg = NULL;
- int i, ret;
+ struct drm_i915_gem_object *old_obj_priv = NULL;
+ int i, ret, avail;
switch (obj_priv->tiling_mode) {
case I915_TILING_NONE:
}
/* First try to find a free reg */
+try_again:
+ avail = 0;
for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
reg = &dev_priv->fence_regs[i];
if (!reg->obj)
break;
+
+ old_obj_priv = reg->obj->driver_private;
+ if (!old_obj_priv->pin_count)
+ avail++;
}
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
- struct drm_i915_gem_object *old_obj_priv = NULL;
+ uint32_t seqno = dev_priv->mm.next_gem_seqno;
loff_t offset;
-try_again:
- /* Could try to use LRU here instead... */
+ if (avail == 0)
+ return -ENOMEM;
+
for (i = dev_priv->fence_reg_start;
i < dev_priv->num_fence_regs; i++) {
+ uint32_t this_seqno;
+
reg = &dev_priv->fence_regs[i];
old_obj_priv = reg->obj->driver_private;
- if (!old_obj_priv->pin_count)
+
+ if (old_obj_priv->pin_count)
+ continue;
+
+ /* i915 uses fences for GPU access to tiled buffers */
+ if (IS_I965G(dev) || !old_obj_priv->active)
break;
+
+ /* find the seqno of the first available fence */
+ this_seqno = old_obj_priv->last_rendering_seqno;
+ if (this_seqno != 0 &&
+ reg->obj->write_domain == 0 &&
+ i915_seqno_passed(seqno, this_seqno))
+ seqno = this_seqno;
}
/*
* objects to finish before trying again.
*/
if (i == dev_priv->num_fence_regs) {
- ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0);
- if (ret) {
- WARN(ret != -ERESTARTSYS,
- "switch to GTT domain failed: %d\n", ret);
- return ret;
+ if (seqno == dev_priv->mm.next_gem_seqno) {
+ i915_gem_flush(dev,
+ I915_GEM_GPU_DOMAINS,
+ I915_GEM_GPU_DOMAINS);
+ seqno = i915_add_request(dev,
+ I915_GEM_GPU_DOMAINS);
+ if (seqno == 0)
+ return -ENOMEM;
}
+
+ ret = i915_wait_request(dev, seqno);
+ if (ret)
+ return ret;
goto try_again;
}
+ BUG_ON(old_obj_priv->active ||
+ (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
+
/*
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
if (IS_I965G(dev))
I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
- else
- I915_WRITE(FENCE_REG_830_0 + (obj_priv->fence_reg * 4), 0);
+ else {
+ uint32_t fence_reg;
+
+ if (obj_priv->fence_reg < 8)
+ fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+ else
+ fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
+ 8) * 4;
+
+ I915_WRITE(fence_reg, 0);
+ }
dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
struct drm_i915_gem_exec_object *exec_list = NULL;
struct drm_gem_object **object_list = NULL;
struct drm_gem_object *batch_obj;
+ struct drm_i915_gem_object *obj_priv;
int ret, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains;
ret = -EBADF;
goto err;
}
+
+ obj_priv = object_list[i]->driver_private;
+ if (obj_priv->in_execbuffer) {
+ DRM_ERROR("Object %p appears more than once in object list\n",
+ object_list[i]);
+ ret = -EBADF;
+ goto err;
+ }
+ obj_priv->in_execbuffer = true;
}
/* Pin and relocate */
for (i = 0; i < pinned; i++)
i915_gem_object_unpin(object_list[i]);
- for (i = 0; i < args->buffer_count; i++)
+ for (i = 0; i < args->buffer_count; i++) {
+ if (object_list[i]) {
+ obj_priv = object_list[i]->driver_private;
+ obj_priv->in_execbuffer = false;
+ }
drm_gem_object_unreference(object_list[i]);
+ }
mutex_unlock(&dev->struct_mutex);
ret = i915_gem_object_bind_to_gtt(obj, alignment);
if (ret != 0) {
if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to bind: %d", ret);
+ DRM_ERROR("Failure to bind: %d\n", ret);
+ return ret;
+ }
+ }
+ /*
+ * Pre-965 chips need a fence register set up in order to
+ * properly handle tiled surfaces.
+ */
+ if (!IS_I965G(dev) &&
+ obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+ obj_priv->tiling_mode != I915_TILING_NONE) {
+ ret = i915_gem_object_get_fence_reg(obj, true);
+ if (ret != 0) {
+ if (ret != -EBUSY && ret != -ERESTARTSYS)
+ DRM_ERROR("Failure to install fence: %d\n",
+ ret);
return ret;
}
- /*
- * Pre-965 chips need a fence register set up in order to
- * properly handle tiled surfaces.
- */
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE)
- i915_gem_object_get_fence_reg(obj, true);
}
obj_priv->pin_count++;
user_data = (char __user *) (uintptr_t) args->data_ptr;
obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
- DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size);
+ DRM_DEBUG("obj_addr %p, %lld\n", obj_addr, args->size);
ret = copy_from_user(obj_addr, user_data, args->size);
if (ret)
return -EFAULT;
drm_i915_irq_emit_t *emit = data;
int result;
- RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
-
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
+
+ RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
mutex_lock(&dev->struct_mutex);
result = i915_emit_irq(dev);
mutex_unlock(&dev->struct_mutex);
* Fence registers
*/
#define FENCE_REG_830_0 0x2000
+#define FENCE_REG_945_8 0x3000
#define I830_FENCE_START_MASK 0x07f80000
#define I830_FENCE_TILING_Y_SHIFT 12
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
/* VGA color palette registers */
dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK);
- /* DACCRX automatically increments during read */
- I915_WRITE8(VGA_DACRX, 0);
- /* Read 3 bytes of color data from each index */
- for (i = 0; i < 256 * 3; i++)
- dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA);
/* MSR bits */
dev_priv->saveMSR = I915_READ8(VGA_MSR_READ);
/* VGA color palette registers */
I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
- /* DACCRX automatically increments during read */
- I915_WRITE8(VGA_DACWX, 0);
- /* Read 3 bytes of color data from each index */
- for (i = 0; i < 256 * 3; i++)
- I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]);
-
}
int i915_save_state(struct drm_device *dev)
panel_fixed_mode->clock = dvo_timing->clock * 10;
panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+ /* Some VBTs have bogus h/vtotal values */
+ if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+ panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+ if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+ panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
drm_mode_set_name(panel_fixed_mode);
dev_priv->vbt_mode = panel_fixed_mode;
return false;
}
-#define INTELPllInvalid(s) do { DRM_DEBUG(s); return false; } while (0)
+#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
* Returns whether the given set of divisors are valid for a given refclk with
* the given connectors.
help
If you say yes here you get support for National Semiconductor LM90,
LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
- MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
- MAX6681 sensor chips.
+ MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+ MAX6680, MAX6681 and MAX6692 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
for (i = 0; i < offset_count; i++)
if ((x = abituguru3_read(data, bank, offset + i, count,
- buf + i * count)) != count)
- return i * count + (i && (x < 0)) ? 0 : x;
+ buf + i * count)) != count) {
+ if (x < 0)
+ return x;
+ return i * count + x;
+ }
return i * count;
}
static int f75375_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct f75375_data *data = i2c_get_clientdata(client);
+ struct f75375_data *data;
struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
int err;
#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
((val)+500)/1000),-128,127))
-#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+#define TEMP_FROM_REG(val) ((val) * 1000)
#define PWM_TO_REG(val) ((val) >> 1)
#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
u8 has_fan; /* Bitfield, fans enabled */
u16 fan[5]; /* Register values, possibly combined */
u16 fan_min[5]; /* Register values, possibly combined */
- u8 temp[3]; /* Register value */
- u8 temp_high[3]; /* Register value */
- u8 temp_low[3]; /* Register value */
+ s8 temp[3]; /* Register value */
+ s8 temp_high[3]; /* Register value */
+ s8 temp_low[3]; /* Register value */
u8 sensor; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
#define LM85_COMPANY_SMSC 0x5c
#define LM85_VERSTEP_VMASK 0xf0
#define LM85_VERSTEP_GENERIC 0x60
+#define LM85_VERSTEP_GENERIC2 0x70
#define LM85_VERSTEP_LM85C 0x60
#define LM85_VERSTEP_LM85B 0x62
#define LM85_VERSTEP_ADM1027 0x60
static const struct i2c_device_id lm85_id[] = {
{ "adm1027", adm1027 },
{ "adt7463", adt7463 },
+ { "adt7468", adt7468 },
{ "lm85", any_chip },
{ "lm85b", lm85b },
{ "lm85c", lm85c },
struct lm85_data *data = lm85_update_device(dev);
int vid;
- if (data->type == adt7463 && (data->vid & 0x80)) {
+ if ((data->type == adt7463 || data->type == adt7468) &&
+ (data->vid & 0x80)) {
/* 6-pin VID (VRM 10) */
vid = vid_from_reg(data->vid & 0x3f, data->vrm);
} else {
address, company, verstep);
/* All supported chips have the version in common */
- if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC) {
+ if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+ (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
dev_dbg(&adapter->dev, "Autodetection failed: "
"unsupported version\n");
return -ENODEV;
* supported by this driver. These chips lack the remote temperature
* offset feature.
*
- * This driver also supports the MAX6646, MAX6647 and MAX6649 chips
- * made by Maxim. These are again similar to the LM86, but they use
- * unsigned temperature values and can report temperatures from 0 to
- * 145 degrees.
+ * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
+ * MAX6692 chips made by Maxim. These are again similar to the LM86,
+ * but they use unsigned temperature values and can report temperatures
+ * from 0 to 145 degrees.
*
* This driver also supports the MAX6680 and MAX6681, two other sensor
* chips made by Maxim. These are quite similar to the other Maxim
.getsda = ioc_getsda,
.getscl = ioc_getscl,
.udelay = 80,
- .timeout = 100
+ .timeout = HZ,
};
static struct i2c_adapter ioc_ops = {
+ .nr = 0,
.algo_data = &ioc_data,
};
{
force_ones = FORCE_ONES | SCL | SDA;
- return i2c_bit_add_bus(&ioc_ops);
+ return i2c_bit_add_numbered_bus(&ioc_ops);
}
module_init(i2c_ioc_init);
{
int timeout = 500;
- while (timeout-- && (inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF))
+ while ((inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF) && --timeout)
udelay(1);
if (!timeout) {
{
int timeout = 500;
- while (timeout-- && (~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF))
+ while ((~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF) && --timeout)
udelay(1);
if (!timeout) {
drv_data->algo_data.getsda = ixp2000_bit_getsda;
drv_data->algo_data.getscl = ixp2000_bit_getscl;
drv_data->algo_data.udelay = 6;
- drv_data->algo_data.timeout = 100;
+ drv_data->algo_data.timeout = HZ;
strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
sizeof(drv_data->adapter.name));
return 0;
}
-static void __devexit
+static void
mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
{
if (drv_data->reg_base) {
static struct platform_driver mv64xxx_i2c_driver = {
.probe = mv64xxx_i2c_probe,
- .remove = mv64xxx_i2c_remove,
+ .remove = __devexit_p(mv64xxx_i2c_remove),
.driver = {
.owner = THIS_MODULE,
.name = MV64XXX_I2C_CTLR_NAME,
i2c_pxa_start_message(i2c);
- while (timeout-- && i2c->msg_num > 0) {
+ while (i2c->msg_num > 0 && --timeout) {
i2c_pxa_handler(0, i2c);
udelay(10);
}
.getsda = scx200_i2c_getsda,
.getscl = scx200_i2c_getscl,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
static struct i2c_adapter scx200_i2c_ops = {
case I2C_SMBUS_QUICK:
msg[0].len = 0;
/* Special case: The read/write field is used as data */
- msg[0].flags = flags | (read_write==I2C_SMBUS_READ)?I2C_M_RD:0;
+ msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
+ I2C_M_RD : 0);
num = 1;
break;
case I2C_SMBUS_BYTE:
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
#include <linux/smp_lock.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
static struct i2c_driver i2cdev_driver;
client->adapter->retries = arg;
break;
case I2C_TIMEOUT:
- client->adapter->timeout = arg;
+ /* For historical reasons, user-space sets the timeout
+ * value in units of 10 ms.
+ */
+ client->adapter->timeout = msecs_to_jiffies(arg * 10);
break;
default:
/* NOTE: returning a fault code here could cause trouble
SMART parameters from disk drives.
To compile this driver as a module, choose M here: the
- module will be called ide.
+ module will be called ide-core.ko.
For further information, please read <file:Documentation/ide/ide.txt>.
depends on SOC_TX4939
select BLK_DEV_IDEDMA_SFF
+config BLK_DEV_IDE_AT91
+ tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
+ depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+ select IDE_TIMINGS
+
config IDE_ARM
tristate "ARM IDE support"
depends on ARM && (ARCH_RPC || ARCH_SHARK)
obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o
+obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o
* Check for broken FIFO support.
*/
if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
+ dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
t &= 0x0f;
else
t |= 0xf0;
--- /dev/null
+/*
+ * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
+ * with Compact Flash True IDE logic
+ *
+ * Copyright (c) 2008, 2009 Kelvatek Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ide.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9263_matrix.h>
+
+#define DRV_NAME "at91_ide"
+
+#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
+#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
+
+/*
+ * Access to IDE device is possible through EBI Static Memory Controller
+ * with Compact Flash logic. For details see EBI and SMC datasheet sections
+ * of any microcontroller from AT91SAM9 family.
+ *
+ * Within SMC chip select address space, lines A[23:21] distinguish Compact
+ * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
+ * 0x00c0000 - True IDE
+ * 0x00e0000 - Alternate True IDE (Alt Status Register)
+ *
+ * On True IDE mode Task File and Data Register are mapped at the same address.
+ * To distinguish access between these two different bus data width is used:
+ * 8Bit for Task File, 16Bit for Data I/O.
+ *
+ * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
+ * only inside IDE callback routines which are serialized by IDE layer,
+ * so no additional locking needed.
+ */
+
+#define TASK_FILE 0x00c00000
+#define ALT_MODE 0x00e00000
+#define REGS_SIZE 8
+
+#define enter_16bit(cs, mode) do { \
+ mode = at91_sys_read(AT91_SMC_MODE(cs)); \
+ at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
+} while (0)
+
+#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
+
+static void set_smc_timings(const u8 chipselect, const u16 cycle,
+ const u16 setup, const u16 pulse,
+ const u16 data_float, int use_iordy)
+{
+ unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_BAT_SELECT;
+
+ /* disable or enable waiting for IORDY signal */
+ if (use_iordy)
+ mode |= AT91_SMC_EXNWMODE_READY;
+
+ /* add data float cycles if needed */
+ if (data_float)
+ mode |= AT91_SMC_TDF_(data_float);
+
+ at91_sys_write(AT91_SMC_MODE(chipselect), mode);
+
+ /* setup timings in SMC */
+ at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
+ AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(setup) |
+ AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
+ AT91_SMC_NCS_WRPULSE_(cycle) |
+ AT91_SMC_NRDPULSE_(pulse) |
+ AT91_SMC_NCS_RDPULSE_(cycle));
+ at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
+ AT91_SMC_NRDCYCLE_(cycle));
+}
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+ u64 tmp = ns;
+
+ tmp *= mck_hz;
+ tmp += 1000*1000*1000 - 1; /* round up */
+ do_div(tmp, 1000*1000*1000);
+ return (unsigned int) tmp;
+}
+
+static void apply_timings(const u8 chipselect, const u8 pio,
+ const struct ide_timing *timing, int use_iordy)
+{
+ unsigned int t0, t1, t2, t6z;
+ unsigned int cycle, setup, pulse, data_float;
+ unsigned int mck_hz;
+ struct clk *mck;
+
+ /* see table 22 of Compact Flash standard 4.1 for the meaning,
+ * we do not stretch active (t2) time, so setup (t1) + hold time (th)
+ * assure at least minimal recovery (t2i) time */
+ t0 = timing->cyc8b;
+ t1 = timing->setup;
+ t2 = timing->act8b;
+ t6z = (pio < 5) ? 30 : 20;
+
+ pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
+
+ mck = clk_get(NULL, "mck");
+ BUG_ON(IS_ERR(mck));
+ mck_hz = clk_get_rate(mck);
+ pdbg("mck_hz=%u\n", mck_hz);
+
+ cycle = calc_mck_cycles(t0, mck_hz);
+ setup = calc_mck_cycles(t1, mck_hz);
+ pulse = calc_mck_cycles(t2, mck_hz);
+ data_float = calc_mck_cycles(t6z, mck_hz);
+
+ pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
+ cycle, setup, pulse, data_float);
+
+ set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
+}
+
+static void at91_ide_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ u8 chipselect = hwif->select_data;
+ unsigned long mode;
+
+ pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+ len++;
+
+ enter_16bit(chipselect, mode);
+ __ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2);
+ leave_16bit(chipselect, mode);
+}
+
+static void at91_ide_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ u8 chipselect = hwif->select_data;
+ unsigned long mode;
+
+ pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+ enter_16bit(chipselect, mode);
+ __ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2);
+ leave_16bit(chipselect, mode);
+}
+
+static u8 ide_mm_inb(unsigned long port)
+{
+ return readb((void __iomem *) port);
+}
+
+static void ide_mm_outb(u8 value, unsigned long port)
+{
+ writeb(value, (void __iomem *) port);
+}
+
+static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+ u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+ if (task->tf_flags & IDE_TFLAG_FLAGGED)
+ HIHI = 0xFF;
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+ u16 data = (tf->hob_data << 8) | tf->data;
+
+ at91_ide_output_data(drive, NULL, &data, 2);
+ }
+
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+ ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+ ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+ ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+ ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+ ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+ ide_mm_outb(tf->feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+ ide_mm_outb(tf->nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+ ide_mm_outb(tf->lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+ ide_mm_outb(tf->lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+ ide_mm_outb(tf->lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+ ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
+}
+
+static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+
+ if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+ u16 data;
+
+ at91_ide_input_data(drive, NULL, &data, 2);
+ tf->data = data & 0xff;
+ tf->hob_data = (data >> 8) & 0xff;
+ }
+
+ /* be sure we're looking at the low order bits */
+ ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+ tf->feature = ide_mm_inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+ tf->nsect = ide_mm_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+ tf->lbal = ide_mm_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+ tf->lbam = ide_mm_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+ tf->lbah = ide_mm_inb(io_ports->lbah_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+ tf->device = ide_mm_inb(io_ports->device_addr);
+
+ if (task->tf_flags & IDE_TFLAG_LBA48) {
+ ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+ tf->hob_feature = ide_mm_inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+ tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+ tf->hob_lbal = ide_mm_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+ tf->hob_lbam = ide_mm_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+ tf->hob_lbah = ide_mm_inb(io_ports->lbah_addr);
+ }
+}
+
+static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ struct ide_timing *timing;
+ u8 chipselect = drive->hwif->select_data;
+ int use_iordy = 0;
+
+ pdbg("chipselect %u pio %u\n", chipselect, pio);
+
+ timing = ide_timing_find_mode(XFER_PIO_0 + pio);
+ BUG_ON(!timing);
+
+ if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
+ !(ata_id_is_cfa(drive->id) && pio > 4))
+ use_iordy = 1;
+
+ apply_timings(chipselect, pio, timing, use_iordy);
+}
+
+static const struct ide_tp_ops at91_ide_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .set_irq = ide_set_irq,
+
+ .tf_load = at91_ide_tf_load,
+ .tf_read = at91_ide_tf_read,
+
+ .input_data = at91_ide_input_data,
+ .output_data = at91_ide_output_data,
+};
+
+static const struct ide_port_ops at91_ide_port_ops = {
+ .set_pio_mode = at91_ide_set_pio_mode,
+};
+
+static const struct ide_port_info at91_ide_port_info __initdata = {
+ .port_ops = &at91_ide_port_ops,
+ .tp_ops = &at91_ide_tp_ops,
+ .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
+ IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
+ .pio_mask = ATA_PIO5,
+};
+
+/*
+ * If interrupt is delivered through GPIO, IRQ are triggered on falling
+ * and rising edge of signal. Whereas IDE device request interrupt on high
+ * level (rising edge in our case). This mean we have fake interrupts, so
+ * we need to check interrupt pin and exit instantly from ISR when line
+ * is on low level.
+ */
+
+irqreturn_t at91_irq_handler(int irq, void *dev_id)
+{
+ int ntries = 8;
+ int pin_val1, pin_val2;
+
+ /* additional deglitch, line can be noisy in badly designed PCB */
+ do {
+ pin_val1 = at91_get_gpio_value(irq);
+ pin_val2 = at91_get_gpio_value(irq);
+ } while (pin_val1 != pin_val2 && --ntries > 0);
+
+ if (pin_val1 == 0 || ntries <= 0)
+ return IRQ_HANDLED;
+
+ return ide_intr(irq, dev_id);
+}
+
+static int __init at91_ide_probe(struct platform_device *pdev)
+{
+ int ret;
+ hw_regs_t hw;
+ hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+ struct ide_host *host;
+ struct resource *res;
+ unsigned long tf_base = 0, ctl_base = 0;
+ struct at91_cf_data *board = pdev->dev.platform_data;
+
+ if (!board)
+ return -ENODEV;
+
+ if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
+ perr("no device detected\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ perr("can't get memory resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
+ REGS_SIZE, "ide") ||
+ !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
+ REGS_SIZE, "alt")) {
+ perr("memory resources in use\n");
+ return -EBUSY;
+ }
+
+ pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
+ board->irq_pin, (unsigned long) res->start);
+
+ tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
+ REGS_SIZE);
+ ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
+ REGS_SIZE);
+ if (!tf_base || !ctl_base) {
+ perr("can't map memory regions\n");
+ return -EBUSY;
+ }
+
+ memset(&hw, 0, sizeof(hw));
+
+ if (board->flags & AT91_IDE_SWAP_A0_A2) {
+ /* workaround for stupid hardware bug */
+ hw.io_ports.data_addr = tf_base + 0;
+ hw.io_ports.error_addr = tf_base + 4;
+ hw.io_ports.nsect_addr = tf_base + 2;
+ hw.io_ports.lbal_addr = tf_base + 6;
+ hw.io_ports.lbam_addr = tf_base + 1;
+ hw.io_ports.lbah_addr = tf_base + 5;
+ hw.io_ports.device_addr = tf_base + 3;
+ hw.io_ports.command_addr = tf_base + 7;
+ hw.io_ports.ctl_addr = ctl_base + 3;
+ } else
+ ide_std_init_ports(&hw, tf_base, ctl_base + 6);
+
+ hw.irq = board->irq_pin;
+ hw.chipset = ide_generic;
+ hw.dev = &pdev->dev;
+
+ host = ide_host_alloc(&at91_ide_port_info, hws);
+ if (!host) {
+ perr("failed to allocate ide host\n");
+ return -ENOMEM;
+ }
+
+ /* setup Static Memory Controller - PIO 0 as default */
+ apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
+
+ /* with GPIO interrupt we have to do quirks in handler */
+ if (board->irq_pin >= PIN_BASE)
+ host->irq_handler = at91_irq_handler;
+
+ host->ports[0]->select_data = board->chipselect;
+
+ ret = ide_host_register(host, &at91_ide_port_info, hws);
+ if (ret) {
+ perr("failed to register ide host\n");
+ goto err_free_host;
+ }
+ platform_set_drvdata(pdev, host);
+ return 0;
+
+err_free_host:
+ ide_host_free(host);
+ return ret;
+}
+
+static int __exit at91_ide_remove(struct platform_device *pdev)
+{
+ struct ide_host *host = platform_get_drvdata(pdev);
+
+ ide_host_remove(host);
+ return 0;
+}
+
+static struct platform_driver at91_ide_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(at91_ide_remove),
+};
+
+static int __init at91_ide_init(void)
+{
+ return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
+}
+
+static void __exit at91_ide_exit(void)
+{
+ platform_driver_unregister(&at91_ide_driver);
+}
+
+module_init(at91_ide_init);
+module_exit(at91_ide_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
+
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
- int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+ int timing_shift = (drive->dn ^ 1) * 8;
u32 pio_timing_data;
u16 pio_mode_data;
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
- int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+ int timing_shift = (drive->dn ^ 1) * 8;
u32 tmp32;
u16 tmp16;
u16 udma_ctl = 0;
static DEFINE_MUTEX(idecd_ref_mutex);
-static void ide_cd_release(struct kref *);
+static void ide_cd_release(struct device *);
static struct cdrom_info *ide_cd_get(struct gendisk *disk)
{
if (ide_device_get(cd->drive))
cd = NULL;
else
- kref_get(&cd->kref);
+ get_device(&cd->dev);
}
mutex_unlock(&idecd_ref_mutex);
ide_drive_t *drive = cd->drive;
mutex_lock(&idecd_ref_mutex);
- kref_put(&cd->kref, ide_cd_release);
+ put_device(&cd->dev);
ide_device_put(drive);
mutex_unlock(&idecd_ref_mutex);
}
bio_sectors = max(bio_sectors(failed_command->bio), 4U);
sector &= ~(bio_sectors - 1);
+ /*
+ * The SCSI specification allows for the value
+ * returned by READ CAPACITY to be up to 75 2K
+ * sectors past the last readable block.
+ * Therefore, if we hit a medium error within the
+ * last 75 2K sectors, we decrease the saved size
+ * value.
+ */
if (sector < get_capacity(info->disk) &&
drive->probed_capacity - sector < 4 * 75)
set_capacity(info->disk, sector);
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
ide_proc_unregister_driver(drive, info->driver);
-
+ device_del(&info->dev);
del_gendisk(info->disk);
- ide_cd_put(info);
+ mutex_lock(&idecd_ref_mutex);
+ put_device(&info->dev);
+ mutex_unlock(&idecd_ref_mutex);
}
-static void ide_cd_release(struct kref *kref)
+static void ide_cd_release(struct device *dev)
{
- struct cdrom_info *info = to_ide_drv(kref, cdrom_info);
+ struct cdrom_info *info = to_ide_drv(dev, cdrom_info);
struct cdrom_device_info *devinfo = &info->devinfo;
ide_drive_t *drive = info->drive;
struct gendisk *g = info->disk;
ide_init_disk(g, drive);
- kref_init(&info->kref);
+ info->dev.parent = &drive->gendev;
+ info->dev.release = ide_cd_release;
+ dev_set_name(&info->dev, dev_name(&drive->gendev));
+
+ if (device_register(&info->dev))
+ goto out_free_disk;
info->drive = drive;
info->driver = &ide_cdrom_driver;
g->driverfs_dev = &drive->gendev;
g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
if (ide_cdrom_setup(drive)) {
- ide_cd_release(&info->kref);
+ put_device(&info->dev);
goto failed;
}
add_disk(g);
return 0;
+out_free_disk:
+ put_disk(g);
out_free_cd:
kfree(info);
failed:
ide_drive_t *drive;
struct ide_driver *driver;
struct gendisk *disk;
- struct kref kref;
+ struct device dev;
/* Buffer for table of contents. NULL if we haven't allocated
a TOC buffer for this device yet. */
IDE_PROC_DEVSET(multcount, 0, 16),
IDE_PROC_DEVSET(nowerr, 0, 1),
IDE_PROC_DEVSET(wcache, 0, 1),
- { 0 },
+ { NULL },
};
IDE_PROC_DEVSET(bios_head, 0, 255),
IDE_PROC_DEVSET(bios_sect, 0, 63),
IDE_PROC_DEVSET(ticks, 0, 255),
- { 0 },
+ { NULL },
};
static DEFINE_MUTEX(ide_disk_ref_mutex);
-static void ide_disk_release(struct kref *);
+static void ide_disk_release(struct device *);
static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
{
if (ide_device_get(idkp->drive))
idkp = NULL;
else
- kref_get(&idkp->kref);
+ get_device(&idkp->dev);
}
mutex_unlock(&ide_disk_ref_mutex);
return idkp;
ide_drive_t *drive = idkp->drive;
mutex_lock(&ide_disk_ref_mutex);
- kref_put(&idkp->kref, ide_disk_release);
+ put_device(&idkp->dev);
ide_device_put(drive);
mutex_unlock(&ide_disk_ref_mutex);
}
struct gendisk *g = idkp->disk;
ide_proc_unregister_driver(drive, idkp->driver);
-
+ device_del(&idkp->dev);
del_gendisk(g);
-
drive->disk_ops->flush(drive);
- ide_disk_put(idkp);
+ mutex_lock(&ide_disk_ref_mutex);
+ put_device(&idkp->dev);
+ mutex_unlock(&ide_disk_ref_mutex);
}
-static void ide_disk_release(struct kref *kref)
+static void ide_disk_release(struct device *dev)
{
- struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj);
+ struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj);
ide_drive_t *drive = idkp->drive;
struct gendisk *g = idkp->disk;
ide_init_disk(g, drive);
- kref_init(&idkp->kref);
+ idkp->dev.parent = &drive->gendev;
+ idkp->dev.release = ide_disk_release;
+ dev_set_name(&idkp->dev, dev_name(&drive->gendev));
+
+ if (device_register(&idkp->dev))
+ goto out_free_disk;
idkp->drive = drive;
idkp->driver = &ide_gd_driver;
add_disk(g);
return 0;
+out_free_disk:
+ put_disk(g);
out_free_idkp:
kfree(idkp);
failed:
ide_drive_t *drive;
struct ide_driver *driver;
struct gendisk *disk;
- struct kref kref;
+ struct device dev;
unsigned int openers; /* protected by BKL for now */
/* Last failed packet command */
ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
unsigned long flags;
- unsigned long wait = -1;
+ int wait = -1;
int plug_device = 0;
spin_lock_irqsave(&hwif->lock, flags);
return irq_ret;
}
+EXPORT_SYMBOL_GPL(ide_intr);
/**
* ide_do_drive_cmd - issue IDE special command
u8 io_32bit = drive->io_32bit;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ len++;
+
if (io_32bit) {
unsigned long uninitialized_var(flags);
static int init_irq (ide_hwif_t *hwif)
{
struct ide_io_ports *io_ports = &hwif->io_ports;
+ irq_handler_t irq_handler;
int sa = 0;
mutex_lock(&ide_cfg_mtx);
hwif->timer.function = &ide_timer_expiry;
hwif->timer.data = (unsigned long)hwif;
+ irq_handler = hwif->host->irq_handler;
+ if (irq_handler == NULL)
+ irq_handler = ide_intr;
+
#if defined(__mc68000__)
sa = IRQF_SHARED;
#endif /* __mc68000__ */
if (io_ports->ctl_addr)
hwif->tp_ops->set_irq(hwif, 1);
- if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif))
+ if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
goto out_up;
if (!hwif->rqsize) {
IDE_PROC_DEVSET(pio_mode, 0, 255),
IDE_PROC_DEVSET(unmaskirq, 0, 1),
IDE_PROC_DEVSET(using_dma, 0, 1),
- { 0 },
+ { NULL },
};
static void proc_ide_settings_warn(void)
ide_drive_t *drive;
struct ide_driver *driver;
struct gendisk *disk;
- struct kref kref;
+ struct device dev;
/*
* failed_pc points to the last failed packet command, or contains
static struct class *idetape_sysfs_class;
-static void ide_tape_release(struct kref *);
+static void ide_tape_release(struct device *);
static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
{
if (ide_device_get(tape->drive))
tape = NULL;
else
- kref_get(&tape->kref);
+ get_device(&tape->dev);
}
mutex_unlock(&idetape_ref_mutex);
return tape;
ide_drive_t *drive = tape->drive;
mutex_lock(&idetape_ref_mutex);
- kref_put(&tape->kref, ide_tape_release);
+ put_device(&tape->dev);
ide_device_put(drive);
mutex_unlock(&idetape_ref_mutex);
}
mutex_lock(&idetape_ref_mutex);
tape = idetape_devs[i];
if (tape)
- kref_get(&tape->kref);
+ get_device(&tape->dev);
mutex_unlock(&idetape_ref_mutex);
return tape;
}
__IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
mulf_tdsc, divf_tdsc),
- { 0 },
+ { NULL },
};
#endif
idetape_tape_t *tape = drive->driver_data;
ide_proc_unregister_driver(drive, tape->driver);
-
+ device_del(&tape->dev);
ide_unregister_region(tape->disk);
- ide_tape_put(tape);
+ mutex_lock(&idetape_ref_mutex);
+ put_device(&tape->dev);
+ mutex_unlock(&idetape_ref_mutex);
}
-static void ide_tape_release(struct kref *kref)
+static void ide_tape_release(struct device *dev)
{
- struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj);
+ struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
ide_drive_t *drive = tape->drive;
struct gendisk *g = tape->disk;
ide_init_disk(g, drive);
- kref_init(&tape->kref);
+ tape->dev.parent = &drive->gendev;
+ tape->dev.release = ide_tape_release;
+ dev_set_name(&tape->dev, dev_name(&drive->gendev));
+
+ if (device_register(&tape->dev))
+ goto out_free_disk;
tape->drive = drive;
tape->driver = &idetape_driver;
return 0;
+out_free_disk:
+ put_disk(g);
out_free_tape:
kfree(tape);
failed:
int a, b, i, j = 1;
unsigned int *dev_param_mask = (unsigned int *)kp->arg;
+ /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
sscanf(s, "%d.%d", &a, &b) != 2)
return -EINVAL;
if (j)
*dev_param_mask |= (1 << i);
else
- *dev_param_mask &= (1 << i);
+ *dev_param_mask &= ~(1 << i);
return 0;
}
{
int a, b, c = 0, h = 0, s = 0, i, j = 1;
+ /* controller . device (0 or 1) : Cylinders , Heads , Sectors */
+ /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
return -EINVAL;
if (j)
ide_disks |= (1 << i);
else
- ide_disks &= (1 << i);
+ ide_disks &= ~(1 << i);
ide_disks_chs[i].cyl = c;
ide_disks_chs[i].head = h;
{
int i, j = 1;
+ /* controller (ignore) */
+ /* controller : 1 (ignore) | 0 (use) */
if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
return -EINVAL;
if (j)
ide_ignore_cable |= (1 << i);
else
- ide_ignore_cable &= (1 << i);
+ ide_ignore_cable &= ~(1 << i);
return 0;
}
* May be copied or modified under the terms of the GNU General Public License
* Based in part on the ITE vendor provided SCSI driver.
*
- * Documentation available from
- * http://www.ite.com.tw/pc/IT8212F_V04.pdf
- * Some other documents are NDA.
+ * Documentation:
+ * Datasheet is freely available, some other documents under NDA.
*
* The ITE8212 isn't exactly a standard IDE controller. It has two
* modes. In pass through mode then it is an IDE controller. In its smart
#include <asm/types.h>
+struct file;
struct pci_dev;
struct scatterlist;
struct vm_area_struct;
unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
}
-module_init(ieee1394_init);
+fs_initcall(ieee1394_init);
module_exit(ieee1394_cleanup);
/* Exported symbols */
EXPORT_SYMBOL(hpsb_make_phypacket);
EXPORT_SYMBOL(hpsb_read);
EXPORT_SYMBOL(hpsb_write);
+EXPORT_SYMBOL(hpsb_lock);
EXPORT_SYMBOL(hpsb_packet_success);
/** highlevel.c **/
if (length == 0)
return -EINVAL;
- BUG_ON(in_interrupt()); // We can't be called in an interrupt, yet
-
packet = hpsb_make_readpacket(host, node, addr, length);
if (!packet) {
if (length == 0)
return -EINVAL;
- BUG_ON(in_interrupt()); // We can't be called in an interrupt, yet
-
packet = hpsb_make_writepacket(host, node, addr, buffer, length);
if (!packet)
return retval;
}
+
+int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
+ u64 addr, int extcode, quadlet_t *data, quadlet_t arg)
+{
+ struct hpsb_packet *packet;
+ int retval = 0;
+
+ packet = hpsb_make_lockpacket(host, node, addr, extcode, data, arg);
+ if (!packet)
+ return -ENOMEM;
+
+ packet->generation = generation;
+ retval = hpsb_send_packet_and_wait(packet);
+ if (retval < 0)
+ goto hpsb_lock_fail;
+
+ retval = hpsb_packet_success(packet);
+
+ if (retval == 0)
+ *data = packet->data[0];
+
+hpsb_lock_fail:
+ hpsb_free_tlabel(packet);
+ hpsb_free_packet(packet);
+
+ return retval;
+}
u64 addr, quadlet_t *buffer, size_t length);
int hpsb_write(struct hpsb_host *host, nodeid_t node, unsigned int generation,
u64 addr, quadlet_t *buffer, size_t length);
+int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
+ u64 addr, int extcode, quadlet_t *data, quadlet_t arg);
#ifdef HPSB_DEBUG_TLABELS
extern spinlock_t hpsb_tlabel_lock;
#define IEEE1394_ISO_H
#include <linux/spinlock_types.h>
+#include <linux/wait.h>
#include <asm/atomic.h>
#include <asm/types.h>
ud->ud_kv = ud_kv;
ud->id = (*id)++;
+ /* inherit vendor_id from root directory if none exists in unit dir */
+ ud->vendor_id = ne->vendor_id;
+
csr1212_for_each_dir_entry(ne->csr, kv, ud_kv, dentry) {
switch (kv->key.id) {
case CSR1212_KV_ID_VENDOR:
csr1212_destroy_csr(csr);
}
- /* Mark the node current */
+ /* Finally, mark the node current */
+ smp_wmb();
ne->generation = generation;
if (ne->in_limbo) {
{
packet->host = ne->host;
packet->generation = ne->generation;
- barrier();
+ smp_rmb();
packet->node_id = ne->nodeid;
}
{
unsigned int generation = ne->generation;
- barrier();
+ smp_rmb();
return hpsb_write(ne->host, ne->nodeid, generation,
addr, buffer, length);
}
#define _IEEE1394_NODEMGR_H
#include <linux/device.h>
+#include <asm/system.h>
#include <asm/types.h>
#include "ieee1394_core.h"
+#include "ieee1394_transactions.h"
#include "ieee1394_types.h"
struct csr1212_csr;
void hpsb_node_fill_packet(struct node_entry *ne, struct hpsb_packet *packet);
int hpsb_node_write(struct node_entry *ne, u64 addr,
quadlet_t *buffer, size_t length);
+static inline int hpsb_node_read(struct node_entry *ne, u64 addr,
+ quadlet_t *buffer, size_t length)
+{
+ unsigned int g = ne->generation;
+
+ smp_rmb();
+ return hpsb_read(ne->host, ne->nodeid, g, addr, buffer, length);
+}
+static inline int hpsb_node_lock(struct node_entry *ne, u64 addr, int extcode,
+ quadlet_t *buffer, quadlet_t arg)
+{
+ unsigned int g = ne->generation;
+
+ smp_rmb();
+ return hpsb_lock(ne->host, ne->nodeid, g, addr, extcode, buffer, arg);
+}
int nodemgr_for_each_host(void *data, int (*cb)(struct hpsb_host *, void *));
int init_ieee1394_nodemgr(void);
int ret = 0;
struct nes_vnic *nesvnic;
struct nes_device *nesdev;
+ struct nes_ib_device *nesibdev;
nesvnic = to_nesvnic(nesqp->ibqp.device);
if (!nesvnic)
return -EINVAL;
nesdev = nesvnic->nesdev;
+ nesibdev = nesvnic->nesibdev;
nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n",
atomic_read(&nesvnic->netdev->refcnt));
} else {
/* Need to free the Last Streaming Mode Message */
if (nesqp->ietf_frame) {
+ if (nesqp->lsmm_mr)
+ nesibdev->ibdev.dereg_mr(nesqp->lsmm_mr);
pci_free_consistent(nesdev->pcidev,
nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
nesqp->ietf_frame, nesqp->ietf_frame_pbase);
u32 crc_value;
int ret;
int passive_state;
+ struct nes_ib_device *nesibdev;
+ struct ib_mr *ibmr = NULL;
+ struct ib_phys_buf ibphysbuf;
+ struct nes_pd *nespd;
+
+
ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
if (!ibqp)
if (cm_id->remote_addr.sin_addr.s_addr !=
cm_id->local_addr.sin_addr.s_addr) {
u64temp = (unsigned long)nesqp;
+ nesibdev = nesvnic->nesibdev;
+ nespd = nesqp->nespd;
+ ibphysbuf.addr = nesqp->ietf_frame_pbase;
+ ibphysbuf.size = conn_param->private_data_len +
+ sizeof(struct ietf_mpa_frame);
+ ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd,
+ &ibphysbuf, 1,
+ IB_ACCESS_LOCAL_WRITE,
+ (u64 *)&nesqp->ietf_frame);
+ if (!ibmr) {
+ nes_debug(NES_DBG_CM, "Unable to register memory region"
+ "for lSMM for cm_node = %p \n",
+ cm_node);
+ return -ENOMEM;
+ }
+
+ ibmr->pd = &nespd->ibpd;
+ ibmr->device = nespd->ibpd.device;
+ nesqp->lsmm_mr = ibmr;
+
u64temp |= NES_SW_CONTEXT_ALIGN>>1;
set_wqe_64bit_value(wqe->wqe_words,
NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
cpu_to_le32(conn_param->private_data_len +
sizeof(struct ietf_mpa_frame));
- wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
- cpu_to_le32((u32)nesqp->ietf_frame_pbase);
- wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
- cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
+ set_wqe_64bit_value(wqe->wqe_words,
+ NES_IWARP_SQ_WQE_FRAG0_LOW_IDX,
+ (u64)nesqp->ietf_frame);
wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
cpu_to_le32(conn_param->private_data_len +
sizeof(struct ietf_mpa_frame));
- wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = ibmr->lkey;
nesqp->nesqp_context->ird_ord_sizes |=
cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
NES_QPCONTEXT_MISC_RQ_SIZE_SHIFT);
nesqp->nesqp_context->misc |= cpu_to_le32((u32)nesqp->hwqp.sq_encoded_size <<
NES_QPCONTEXT_MISC_SQ_SIZE_SHIFT);
+ if (!udata) {
nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_PRIV_EN);
nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_FAST_REGISTER_EN);
+ }
nesqp->nesqp_context->cqs = cpu_to_le32(nesqp->nesscq->hw_cq.cq_number +
((u32)nesqp->nesrcq->hw_cq.cq_number << 16));
u64temp = (u64)nesqp->hwqp.sq_pbase;
struct ietf_mpa_frame *ietf_frame;
dma_addr_t ietf_frame_pbase;
wait_queue_head_t state_waitq;
+ struct ib_mr *lsmm_mr;
unsigned long socket;
struct nes_hw_qp hwqp;
struct work_struct work;
*/
static void atkbd_dell_laptop_keymap_fixup(struct atkbd *atkbd)
{
- const unsigned int forced_release_keys[] = {
+ static const unsigned int forced_release_keys[] = {
0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93,
};
int i;
*/
static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
{
- const unsigned int forced_release_keys[] = {
+ static const unsigned int forced_release_keys[] = {
0x94,
};
int i;
goto out;
}
- if (!pdata->debounce_time || !pdata->debounce_time > MAX_MULT ||
- !pdata->coldrive_time || !pdata->coldrive_time > MAX_MULT) {
+ if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT ||
+ !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) {
printk(KERN_ERR DRV_NAME
": Invalid Debounce/Columdrive Time from pdata\n");
bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */
#define corgikbd_resume NULL
#endif
-static int __init corgikbd_probe(struct platform_device *pdev)
+static int __devinit corgikbd_probe(struct platform_device *pdev)
{
struct corgikbd *corgikbd;
struct input_dev *input_dev;
return err;
}
-static int corgikbd_remove(struct platform_device *pdev)
+static int __devexit corgikbd_remove(struct platform_device *pdev)
{
int i;
struct corgikbd *corgikbd = platform_get_drvdata(pdev);
static struct platform_driver corgikbd_driver = {
.probe = corgikbd_probe,
- .remove = corgikbd_remove,
+ .remove = __devexit_p(corgikbd_remove),
.suspend = corgikbd_suspend,
.resume = corgikbd_resume,
.driver = {
},
};
-static int __devinit corgikbd_init(void)
+static int __init corgikbd_init(void)
{
return platform_driver_register(&corgikbd_driver);
}
#define omap_kp_resume NULL
#endif
-static int __init omap_kp_probe(struct platform_device *pdev)
+static int __devinit omap_kp_probe(struct platform_device *pdev)
{
struct omap_kp *omap_kp;
struct input_dev *input_dev;
return -EINVAL;
}
-static int omap_kp_remove(struct platform_device *pdev)
+static int __devexit omap_kp_remove(struct platform_device *pdev)
{
struct omap_kp *omap_kp = platform_get_drvdata(pdev);
static struct platform_driver omap_kp_driver = {
.probe = omap_kp_probe,
- .remove = omap_kp_remove,
+ .remove = __devexit_p(omap_kp_remove),
.suspend = omap_kp_suspend,
.resume = omap_kp_resume,
.driver = {
},
};
-static int __devinit omap_kp_init(void)
+static int __init omap_kp_init(void)
{
printk(KERN_INFO "OMAP Keypad Driver\n");
return platform_driver_register(&omap_kp_driver);
#define spitzkbd_resume NULL
#endif
-static int __init spitzkbd_probe(struct platform_device *dev)
+static int __devinit spitzkbd_probe(struct platform_device *dev)
{
struct spitzkbd *spitzkbd;
struct input_dev *input_dev;
return err;
}
-static int spitzkbd_remove(struct platform_device *dev)
+static int __devexit spitzkbd_remove(struct platform_device *dev)
{
int i;
struct spitzkbd *spitzkbd = platform_get_drvdata(dev);
static struct platform_driver spitzkbd_driver = {
.probe = spitzkbd_probe,
- .remove = spitzkbd_remove,
+ .remove = __devexit_p(spitzkbd_remove),
.suspend = spitzkbd_suspend,
.resume = spitzkbd_resume,
.driver = {
},
};
-static int __devinit spitzkbd_init(void)
+static int __init spitzkbd_init(void)
{
return platform_driver_register(&spitzkbd_driver);
}
config MOUSE_PS2_LIFEBOOK
bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
default y
- depends on MOUSE_PS2
+ depends on MOUSE_PS2 && X86
help
Say Y here if you have a Fujitsu B-series Lifebook PS/2
TouchScreen connected to your system.
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
- pr_err("elantech.c: sending Elantech magic knock failed.\n");
+ pr_debug("elantech.c: sending Elantech magic knock failed.\n");
return -1;
}
* set of magic numbers
*/
if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
- pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
+ pr_debug("elantech.c: "
+ "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+ param[0], param[1], param[2]);
+ return -1;
+ }
+
+ /*
+ * Query touchpad's firmware version and see if it reports known
+ * value to avoid mis-detection. Logitech mice are known to respond
+ * to Elantech magic knock and there might be more.
+ */
+ if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
+ pr_debug("elantech.c: failed to query firmware version.\n");
+ return -1;
+ }
+
+ pr_debug("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+ param[0], param[1], param[2]);
+
+ if (param[0] == 0 || param[1] != 0) {
+ pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
return -1;
}
int i, error;
unsigned char param[3];
- etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
- psmouse->private = etd;
+ psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
if (!etd)
return -1;
etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
/*
- * Find out what version hardware this is
+ * Do the version query again so we can store the result
*/
if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
pr_err("elantech.c: failed to query firmware version.\n");
goto init_fail;
}
- pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
etd->fw_version_maj = param[0];
etd->fw_version_min = param[2];
__raw_writel(v, trkball->mmio_base + TBCR);
- while (i--) {
+ while (--i) {
if (__raw_readl(trkball->mmio_base + TBCR) == v)
break;
msleep(1);
static int synaptics_query_hardware(struct psmouse *psmouse)
{
- int retries = 0;
-
- while ((retries++ < 3) && psmouse_reset(psmouse))
- /* empty */;
-
if (synaptics_identify(psmouse))
return -1;
if (synaptics_model_id(psmouse))
struct synaptics_data *priv = psmouse->private;
struct synaptics_data old_priv = *priv;
+ psmouse_reset(psmouse);
+
if (synaptics_detect(psmouse, 0))
return -1;
if (!priv)
return -1;
+ psmouse_reset(psmouse);
+
if (synaptics_query_hardware(psmouse)) {
printk(KERN_ERR "Unable to query Synaptics hardware.\n");
goto init_fail;
struct amba_kmi_port *kmi = io->port_data;
unsigned int timeleft = 10000; /* timeout in 100ms */
- while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && timeleft--)
+ while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && --timeleft)
udelay(10);
if (timeleft)
io->write = amba_kmi_write;
io->open = amba_kmi_open;
io->close = amba_kmi_close;
- strlcpy(io->name, dev->dev.bus_id, sizeof(io->name));
- strlcpy(io->phys, dev->dev.bus_id, sizeof(io->phys));
+ strlcpy(io->name, dev_name(&dev->dev), sizeof(io->name));
+ strlcpy(io->phys, dev_name(&dev->dev), sizeof(io->phys));
io->port_data = kmi;
io->dev.parent = &dev->dev;
snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
(ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
- strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+ strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->id.type = SERIO_8042;
serio->write = gscps2_write;
serio->open = gscps2_open;
serio->write = ps2_write;
serio->open = ps2_open;
serio->close = ps2_close;
- strlcpy(serio->name, dev->dev.bus_id, sizeof(serio->name));
- strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+ strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
+ strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->port_data = ps2if;
serio->dev.parent = &dev->dev;
ps2if->io = serio;
ts_dev->bufferedmeasure = 0;
snprintf(ts_dev->phys, sizeof(ts_dev->phys),
- "%s/input0", pdev->dev.bus_id);
+ "%s/input0", dev_name(&pdev->dev));
input_dev->name = "atmel touch screen controller";
input_dev->phys = ts_dev->phys;
#define corgits_resume NULL
#endif
-static int __init corgits_probe(struct platform_device *pdev)
+static int __devinit corgits_probe(struct platform_device *pdev)
{
struct corgi_ts *corgi_ts;
struct input_dev *input_dev;
return err;
}
-static int corgits_remove(struct platform_device *pdev)
+static int __devexit corgits_remove(struct platform_device *pdev)
{
struct corgi_ts *corgi_ts = platform_get_drvdata(pdev);
corgi_ts->machinfo->put_hsync();
input_unregister_device(corgi_ts->input);
kfree(corgi_ts);
+
return 0;
}
static struct platform_driver corgits_driver = {
.probe = corgits_probe,
- .remove = corgits_remove,
+ .remove = __devexit_p(corgits_remove),
.suspend = corgits_suspend,
.resume = corgits_resume,
.driver = {
},
};
-static int __devinit corgits_init(void)
+static int __init corgits_init(void)
{
return platform_driver_register(&corgits_driver);
}
pdata->init_platform_hw();
- snprintf(ts->phys, sizeof(ts->phys), "%s/input0", client->dev.bus_id);
+ snprintf(ts->phys, sizeof(ts->phys),
+ "%s/input0", dev_name(&client->dev));
input_dev->name = "TSC2007 Touchscreen";
input_dev->phys = ts->phys;
module_param(swap_xy, bool, 0644);
MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+static int hwcalib_xy;
+module_param(hwcalib_xy, bool, 0644);
+MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
+
/* device specifc data/functions */
struct usbtouch_usb;
struct usbtouch_device_info {
#define USB_DEVICE_HID_CLASS(vend, prod) \
.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+ | USB_DEVICE_ID_MATCH_INT_PROTOCOL \
| USB_DEVICE_ID_MATCH_DEVICE, \
.idVendor = (vend), \
.idProduct = (prod), \
static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- dev->x = (pkt[8] << 8) | pkt[7];
- dev->y = (pkt[10] << 8) | pkt[9];
+ if (hwcalib_xy) {
+ dev->x = (pkt[4] << 8) | pkt[3];
+ dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
+ } else {
+ dev->x = (pkt[8] << 8) | pkt[7];
+ dev->y = (pkt[10] << 8) | pkt[9];
+ }
dev->touch = (pkt[2] & 0x40) ? 1 : 0;
return 1;
return ret;
}
+ /* Default min/max xy are the raw values, override if using hw-calib */
+ if (hwcalib_xy) {
+ input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
+ input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
+ }
+
return 0;
}
#endif
hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0);
}
+/* An extern declaration inside a C file is bad form. Don't do it. */
+extern void lguest_setup_irq(unsigned int irq);
+
/* This routine finds the first virtqueue described in the configuration of
* this device and sets it up.
*
goto unmap;
}
+ /* Make sure the interrupt is allocated. */
+ lguest_setup_irq(lvq->config.irq);
+
/* Tell the interrupt for this virtqueue to go to the virtio_ring
* interrupt handler. */
/* FIXME: We used to have a flag for the Host to tell us we could use
return mddev;
}
-static void mddev_delayed_delete(struct work_struct *ws)
-{
- mddev_t *mddev = container_of(ws, mddev_t, del_work);
- kobject_del(&mddev->kobj);
- kobject_put(&mddev->kobj);
-}
+static void mddev_delayed_delete(struct work_struct *ws);
static void mddev_put(mddev_t *mddev)
{
int mdp_major = 0;
+static void mddev_delayed_delete(struct work_struct *ws)
+{
+ mddev_t *mddev = container_of(ws, mddev_t, del_work);
+
+ if (mddev->private == &md_redundancy_group) {
+ sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+ if (mddev->sysfs_action)
+ sysfs_put(mddev->sysfs_action);
+ mddev->sysfs_action = NULL;
+ mddev->private = NULL;
+ }
+ kobject_del(&mddev->kobj);
+ kobject_put(&mddev->kobj);
+}
+
static int md_alloc(dev_t dev, char *name)
{
static DEFINE_MUTEX(disks_mutex);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
- if (mddev->pers->sync_request) {
- sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
- if (mddev->sysfs_action)
- sysfs_put(mddev->sysfs_action);
- mddev->sysfs_action = NULL;
- }
module_put(mddev->pers->owner);
+ if (mddev->pers->sync_request)
+ mddev->private = &md_redundancy_group;
mddev->pers = NULL;
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
update_head_pos(mirror, r1_bio);
if (atomic_dec_and_test(&r1_bio->remaining)) {
- md_done_sync(mddev, r1_bio->sectors, uptodate);
+ sector_t s = r1_bio->sectors;
put_buf(r1_bio);
+ md_done_sync(mddev, s, uptodate);
}
}
/* for reconstruct, we always reschedule after a read.
* for resync, only after all reads
*/
+ rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
if (test_bit(R10BIO_IsRecover, &r10_bio->state) ||
atomic_dec_and_test(&r10_bio->remaining)) {
/* we have read all the blocks,
*/
reschedule_retry(r10_bio);
}
- rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
}
static void end_sync_write(struct bio *bio, int error)
update_head_pos(i, r10_bio);
+ rdev_dec_pending(conf->mirrors[d].rdev, mddev);
while (atomic_dec_and_test(&r10_bio->remaining)) {
if (r10_bio->master_bio == NULL) {
/* the primary of several recovery bios */
- md_done_sync(mddev, r10_bio->sectors, 1);
+ sector_t s = r10_bio->sectors;
put_buf(r10_bio);
+ md_done_sync(mddev, s, 1);
break;
} else {
r10bio_t *r10_bio2 = (r10bio_t *)r10_bio->master_bio;
r10_bio = r10_bio2;
}
}
- rdev_dec_pending(conf->mirrors[d].rdev, mddev);
}
/*
if (!go_faster && conf->nr_waiting)
msleep_interruptible(1000);
- bitmap_cond_end_sync(mddev->bitmap, sector_nr);
-
/* Again, very different code for resync and recovery.
* Both must result in an r10bio with a list of bios that
* have bi_end_io, bi_sector, bi_bdev set,
/* resync. Schedule a read for every block at this virt offset */
int count = 0;
+ bitmap_cond_end_sync(mddev->bitmap, sector_nr);
+
if (!bitmap_start_sync(mddev->bitmap, sector_nr,
&sync_blocks, mddev->degraded) &&
!conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* There is nowhere to write, so all non-sync
* drives must be failed, so try the next chunk...
*/
- {
- sector_t sec = max_sector - sector_nr;
- sectors_skipped += sec;
+ if (sector_nr + max_sync < max_sector)
+ max_sector = sector_nr + max_sync;
+
+ sectors_skipped += (max_sector - sector_nr);
chunks_skipped ++;
sector_nr = max_sector;
goto skipped;
- }
}
static int run(mddev_t *mddev)
depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/dm1105/Kconfig"
+comment "Supported FireWire (IEEE 1394) Adapters"
+ depends on DVB_CORE && IEEE1394
+source "drivers/media/dvb/firewire/Kconfig"
+
comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
#
obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/
+
+obj-$(CONFIG_DVB_FIREDTV) += firewire/
return 0;
}
+EXPORT_SYMBOL(flexcop_pid_feed_control);
void flexcop_hw_filter_init(struct flexcop_device *fc)
{
module_param(enable_pid_filtering, int, 0444);
MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
-static int irq_chk_intv;
+static int irq_chk_intv = 100;
module_param(irq_chk_intv, int, 0644);
-MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
+MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define dprintk(level,args...) \
static int debug;
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug,
+ "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
+ DEBSTATUS);
#define DRIVER_VERSION "0.1"
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
int count;
+ int count_prev;
+ int stream_problem;
spinlock_t irq_lock;
container_of(work, struct flexcop_pci, irq_check_work.work);
struct flexcop_device *fc = fc_pci->fc_dev;
- flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
-
- flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
-
- if (v.sram_dest_reg_714.net_ovflow_error)
- deb_chk("sram net_ovflow_error\n");
- if (v.sram_dest_reg_714.media_ovflow_error)
- deb_chk("sram media_ovflow_error\n");
- if (v.sram_dest_reg_714.cai_ovflow_error)
- deb_chk("sram cai_ovflow_error\n");
- if (v.sram_dest_reg_714.cai_ovflow_error)
- deb_chk("sram cai_ovflow_error\n");
+ if (fc->feedcount) {
+
+ if (fc_pci->count == fc_pci->count_prev) {
+ deb_chk("no IRQ since the last check\n");
+ if (fc_pci->stream_problem++ == 3) {
+ struct dvb_demux_feed *feed;
+
+ spin_lock_irq(&fc->demux.lock);
+ list_for_each_entry(feed, &fc->demux.feed_list,
+ list_head) {
+ flexcop_pid_feed_control(fc, feed, 0);
+ }
+
+ list_for_each_entry(feed, &fc->demux.feed_list,
+ list_head) {
+ flexcop_pid_feed_control(fc, feed, 1);
+ }
+ spin_unlock_irq(&fc->demux.lock);
+
+ fc_pci->stream_problem = 0;
+ }
+ } else {
+ fc_pci->stream_problem = 0;
+ fc_pci->count_prev = fc_pci->count;
+ }
+ }
schedule_delayed_work(&fc_pci->irq_check_work,
msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
deb_irq("IRQ enabled\n");
+ fc_pci->count_prev = fc_pci->count;
+
// fc_pci->active_dma1_addr = 0;
// flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
- if (irq_chk_intv > 0)
- schedule_delayed_work(&fc_pci->irq_check_work,
- msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
} else {
- if (irq_chk_intv > 0)
- cancel_delayed_work(&fc_pci->irq_check_work);
-
flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
deb_irq("IRQ disabled\n");
IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
goto err_pci_iounmap;
-
-
fc_pci->init_state |= FC_PCI_INIT;
return ret;
INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
+ if (irq_chk_intv > 0)
+ schedule_delayed_work(&fc_pci->irq_check_work,
+ msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+
return ret;
err_fc_exit:
{
struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
+ if (irq_chk_intv > 0)
+ cancel_delayed_work(&fc_pci->irq_check_work);
+
flexcop_pci_dma_exit(fc_pci);
flexcop_device_exit(fc_pci->fc_dev);
flexcop_pci_exit(fc_pci);
v210.sw_reset_210.Block_reset_enable = 0xb2;
fc->write_ibi_reg(fc,sw_reset_210,v210);
- msleep(1);
-
+ udelay(1000);
fc->write_ibi_reg(fc,ctrl_208,v208_save);
}
--- /dev/null
+config DVB_FIREDTV
+ tristate "FireDTV and FloppyDTV"
+ depends on DVB_CORE && IEEE1394
+ help
+ Support for DVB receivers from Digital Everywhere
+ which are connected via IEEE 1394 (FireWire).
+
+ These devices don't have an MPEG decoder built in,
+ so you need an external software decoder to watch TV.
+
+ To compile this driver as a module, say M here:
+ the module will be called firedtv.
+
+if DVB_FIREDTV
+
+config DVB_FIREDTV_IEEE1394
+ def_bool IEEE1394
+
+config DVB_FIREDTV_INPUT
+ def_bool INPUT = y || (INPUT = m && DVB_FIREDTV = m)
+
+endif # DVB_FIREDTV
--- /dev/null
+obj-$(CONFIG_DVB_FIREDTV) += firedtv.o
+
+firedtv-y := firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o
+firedtv-$(CONFIG_DVB_FIREDTV_IEEE1394) += firedtv-1394.o
+firedtv-$(CONFIG_DVB_FIREDTV_INPUT) += firedtv-rc.o
+
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-$(CONFIG_DVB_FIREDTV_IEEE1394) += -Idrivers/ieee1394
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2007-2008 Ben Backx <ben@bbackx.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <dma.h>
+#include <csr1212.h>
+#include <highlevel.h>
+#include <hosts.h>
+#include <ieee1394.h>
+#include <iso.h>
+#include <nodemgr.h>
+
+#include "firedtv.h"
+
+static LIST_HEAD(node_list);
+static DEFINE_SPINLOCK(node_list_lock);
+
+#define FIREWIRE_HEADER_SIZE 4
+#define CIP_HEADER_SIZE 8
+
+static void rawiso_activity_cb(struct hpsb_iso *iso)
+{
+ struct firedtv *f, *fdtv = NULL;
+ unsigned int i, num, packet;
+ unsigned char *buf;
+ unsigned long flags;
+ int count;
+
+ spin_lock_irqsave(&node_list_lock, flags);
+ list_for_each_entry(f, &node_list, list)
+ if (f->backend_data == iso) {
+ fdtv = f;
+ break;
+ }
+ spin_unlock_irqrestore(&node_list_lock, flags);
+
+ packet = iso->first_packet;
+ num = hpsb_iso_n_ready(iso);
+
+ if (!fdtv) {
+ dev_err(fdtv->device, "received at unknown iso channel\n");
+ goto out;
+ }
+
+ for (i = 0; i < num; i++, packet = (packet + 1) % iso->buf_packets) {
+ buf = dma_region_i(&iso->data_buf, unsigned char,
+ iso->infos[packet].offset + CIP_HEADER_SIZE);
+ count = (iso->infos[packet].len - CIP_HEADER_SIZE) /
+ (188 + FIREWIRE_HEADER_SIZE);
+
+ /* ignore empty packet */
+ if (iso->infos[packet].len <= CIP_HEADER_SIZE)
+ continue;
+
+ while (count--) {
+ if (buf[FIREWIRE_HEADER_SIZE] == 0x47)
+ dvb_dmx_swfilter_packets(&fdtv->demux,
+ &buf[FIREWIRE_HEADER_SIZE], 1);
+ else
+ dev_err(fdtv->device,
+ "skipping invalid packet\n");
+ buf += 188 + FIREWIRE_HEADER_SIZE;
+ }
+ }
+out:
+ hpsb_iso_recv_release_packets(iso, num);
+}
+
+static inline struct node_entry *node_of(struct firedtv *fdtv)
+{
+ return container_of(fdtv->device, struct unit_directory, device)->ne;
+}
+
+static int node_lock(struct firedtv *fdtv, u64 addr, void *data, __be32 arg)
+{
+ return hpsb_node_lock(node_of(fdtv), addr, EXTCODE_COMPARE_SWAP, data,
+ (__force quadlet_t)arg);
+}
+
+static int node_read(struct firedtv *fdtv, u64 addr, void *data, size_t len)
+{
+ return hpsb_node_read(node_of(fdtv), addr, data, len);
+}
+
+static int node_write(struct firedtv *fdtv, u64 addr, void *data, size_t len)
+{
+ return hpsb_node_write(node_of(fdtv), addr, data, len);
+}
+
+#define FDTV_ISO_BUFFER_PACKETS 256
+#define FDTV_ISO_BUFFER_SIZE (FDTV_ISO_BUFFER_PACKETS * 200)
+
+static int start_iso(struct firedtv *fdtv)
+{
+ struct hpsb_iso *iso_handle;
+ int ret;
+
+ iso_handle = hpsb_iso_recv_init(node_of(fdtv)->host,
+ FDTV_ISO_BUFFER_SIZE, FDTV_ISO_BUFFER_PACKETS,
+ fdtv->isochannel, HPSB_ISO_DMA_DEFAULT,
+ -1, /* stat.config.irq_interval */
+ rawiso_activity_cb);
+ if (iso_handle == NULL) {
+ dev_err(fdtv->device, "cannot initialize iso receive\n");
+ return -ENOMEM;
+ }
+ fdtv->backend_data = iso_handle;
+
+ ret = hpsb_iso_recv_start(iso_handle, -1, -1, 0);
+ if (ret != 0) {
+ dev_err(fdtv->device, "cannot start iso receive\n");
+ hpsb_iso_shutdown(iso_handle);
+ fdtv->backend_data = NULL;
+ }
+ return ret;
+}
+
+static void stop_iso(struct firedtv *fdtv)
+{
+ struct hpsb_iso *iso_handle = fdtv->backend_data;
+
+ if (iso_handle != NULL) {
+ hpsb_iso_stop(iso_handle);
+ hpsb_iso_shutdown(iso_handle);
+ }
+ fdtv->backend_data = NULL;
+}
+
+static const struct firedtv_backend fdtv_1394_backend = {
+ .lock = node_lock,
+ .read = node_read,
+ .write = node_write,
+ .start_iso = start_iso,
+ .stop_iso = stop_iso,
+};
+
+static void fcp_request(struct hpsb_host *host, int nodeid, int direction,
+ int cts, u8 *data, size_t length)
+{
+ struct firedtv *f, *fdtv = NULL;
+ unsigned long flags;
+ int su;
+
+ if (length == 0 || (data[0] & 0xf0) != 0)
+ return;
+
+ su = data[1] & 0x7;
+
+ spin_lock_irqsave(&node_list_lock, flags);
+ list_for_each_entry(f, &node_list, list)
+ if (node_of(f)->host == host &&
+ node_of(f)->nodeid == nodeid &&
+ (f->subunit == su || (f->subunit == 0 && su == 0x7))) {
+ fdtv = f;
+ break;
+ }
+ spin_unlock_irqrestore(&node_list_lock, flags);
+
+ if (fdtv)
+ avc_recv(fdtv, data, length);
+}
+
+static int node_probe(struct device *dev)
+{
+ struct unit_directory *ud =
+ container_of(dev, struct unit_directory, device);
+ struct firedtv *fdtv;
+ int kv_len, err;
+ void *kv_str;
+
+ kv_len = (ud->model_name_kv->value.leaf.len - 2) * sizeof(quadlet_t);
+ kv_str = CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA(ud->model_name_kv);
+
+ fdtv = fdtv_alloc(dev, &fdtv_1394_backend, kv_str, kv_len);
+ if (!fdtv)
+ return -ENOMEM;
+
+ /*
+ * Work around a bug in udev's path_id script: Use the fw-host's dev
+ * instead of the unit directory's dev as parent of the input device.
+ */
+ err = fdtv_register_rc(fdtv, dev->parent->parent);
+ if (err)
+ goto fail_free;
+
+ spin_lock_irq(&node_list_lock);
+ list_add_tail(&fdtv->list, &node_list);
+ spin_unlock_irq(&node_list_lock);
+
+ err = avc_identify_subunit(fdtv);
+ if (err)
+ goto fail;
+
+ err = fdtv_dvb_register(fdtv);
+ if (err)
+ goto fail;
+
+ avc_register_remote_control(fdtv);
+ return 0;
+fail:
+ spin_lock_irq(&node_list_lock);
+ list_del(&fdtv->list);
+ spin_unlock_irq(&node_list_lock);
+ fdtv_unregister_rc(fdtv);
+fail_free:
+ kfree(fdtv);
+ return err;
+}
+
+static int node_remove(struct device *dev)
+{
+ struct firedtv *fdtv = dev->driver_data;
+
+ fdtv_dvb_unregister(fdtv);
+
+ spin_lock_irq(&node_list_lock);
+ list_del(&fdtv->list);
+ spin_unlock_irq(&node_list_lock);
+
+ cancel_work_sync(&fdtv->remote_ctrl_work);
+ fdtv_unregister_rc(fdtv);
+
+ kfree(fdtv);
+ return 0;
+}
+
+static int node_update(struct unit_directory *ud)
+{
+ struct firedtv *fdtv = ud->device.driver_data;
+
+ if (fdtv->isochannel >= 0)
+ cmp_establish_pp_connection(fdtv, fdtv->subunit,
+ fdtv->isochannel);
+ return 0;
+}
+
+static struct hpsb_protocol_driver fdtv_driver = {
+ .name = "firedtv",
+ .update = node_update,
+ .driver = {
+ .probe = node_probe,
+ .remove = node_remove,
+ },
+};
+
+static struct hpsb_highlevel fdtv_highlevel = {
+ .name = "firedtv",
+ .fcp_request = fcp_request,
+};
+
+int __init fdtv_1394_init(struct ieee1394_device_id id_table[])
+{
+ int ret;
+
+ hpsb_register_highlevel(&fdtv_highlevel);
+ fdtv_driver.id_table = id_table;
+ ret = hpsb_register_protocol(&fdtv_driver);
+ if (ret) {
+ printk(KERN_ERR "firedtv: failed to register protocol\n");
+ hpsb_unregister_highlevel(&fdtv_highlevel);
+ }
+ return ret;
+}
+
+void __exit fdtv_1394_exit(void)
+{
+ hpsb_unregister_protocol(&fdtv_driver);
+ hpsb_unregister_highlevel(&fdtv_highlevel);
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Ben Backx <ben@bbackx.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/stringify.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include "firedtv.h"
+
+#define FCP_COMMAND_REGISTER 0xfffff0000b00ULL
+
+#define AVC_CTYPE_CONTROL 0x0
+#define AVC_CTYPE_STATUS 0x1
+#define AVC_CTYPE_NOTIFY 0x3
+
+#define AVC_RESPONSE_ACCEPTED 0x9
+#define AVC_RESPONSE_STABLE 0xc
+#define AVC_RESPONSE_CHANGED 0xd
+#define AVC_RESPONSE_INTERIM 0xf
+
+#define AVC_SUBUNIT_TYPE_TUNER (0x05 << 3)
+#define AVC_SUBUNIT_TYPE_UNIT (0x1f << 3)
+
+#define AVC_OPCODE_VENDOR 0x00
+#define AVC_OPCODE_READ_DESCRIPTOR 0x09
+#define AVC_OPCODE_DSIT 0xc8
+#define AVC_OPCODE_DSD 0xcb
+
+#define DESCRIPTOR_TUNER_STATUS 0x80
+#define DESCRIPTOR_SUBUNIT_IDENTIFIER 0x00
+
+#define SFE_VENDOR_DE_COMPANYID_0 0x00 /* OUI of Digital Everywhere */
+#define SFE_VENDOR_DE_COMPANYID_1 0x12
+#define SFE_VENDOR_DE_COMPANYID_2 0x87
+
+#define SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL 0x0a
+#define SFE_VENDOR_OPCODE_LNB_CONTROL 0x52
+#define SFE_VENDOR_OPCODE_TUNE_QPSK 0x58 /* for DVB-S */
+
+#define SFE_VENDOR_OPCODE_GET_FIRMWARE_VERSION 0x00
+#define SFE_VENDOR_OPCODE_HOST2CA 0x56
+#define SFE_VENDOR_OPCODE_CA2HOST 0x57
+#define SFE_VENDOR_OPCODE_CISTATUS 0x59
+#define SFE_VENDOR_OPCODE_TUNE_QPSK2 0x60 /* for DVB-S2 */
+
+#define SFE_VENDOR_TAG_CA_RESET 0x00
+#define SFE_VENDOR_TAG_CA_APPLICATION_INFO 0x01
+#define SFE_VENDOR_TAG_CA_PMT 0x02
+#define SFE_VENDOR_TAG_CA_DATE_TIME 0x04
+#define SFE_VENDOR_TAG_CA_MMI 0x05
+#define SFE_VENDOR_TAG_CA_ENTER_MENU 0x07
+
+#define EN50221_LIST_MANAGEMENT_ONLY 0x03
+#define EN50221_TAG_APP_INFO 0x9f8021
+#define EN50221_TAG_CA_INFO 0x9f8031
+
+struct avc_command_frame {
+ int length;
+ u8 ctype;
+ u8 subunit;
+ u8 opcode;
+ u8 operand[509];
+};
+
+struct avc_response_frame {
+ int length;
+ u8 response;
+ u8 subunit;
+ u8 opcode;
+ u8 operand[509];
+};
+
+#define AVC_DEBUG_FCP_SUBACTIONS 1
+#define AVC_DEBUG_FCP_PAYLOADS 2
+
+static int avc_debug;
+module_param_named(debug, avc_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Verbose logging (default = 0"
+ ", FCP subactions = " __stringify(AVC_DEBUG_FCP_SUBACTIONS)
+ ", FCP payloads = " __stringify(AVC_DEBUG_FCP_PAYLOADS)
+ ", or all = -1)");
+
+static const char *debug_fcp_ctype(unsigned int ctype)
+{
+ static const char *ctypes[] = {
+ [0x0] = "CONTROL", [0x1] = "STATUS",
+ [0x2] = "SPECIFIC INQUIRY", [0x3] = "NOTIFY",
+ [0x4] = "GENERAL INQUIRY", [0x8] = "NOT IMPLEMENTED",
+ [0x9] = "ACCEPTED", [0xa] = "REJECTED",
+ [0xb] = "IN TRANSITION", [0xc] = "IMPLEMENTED/STABLE",
+ [0xd] = "CHANGED", [0xf] = "INTERIM",
+ };
+ const char *ret = ctype < ARRAY_SIZE(ctypes) ? ctypes[ctype] : NULL;
+
+ return ret ? ret : "?";
+}
+
+static const char *debug_fcp_opcode(unsigned int opcode,
+ const u8 *data, size_t length)
+{
+ switch (opcode) {
+ case AVC_OPCODE_VENDOR: break;
+ case AVC_OPCODE_READ_DESCRIPTOR: return "ReadDescriptor";
+ case AVC_OPCODE_DSIT: return "DirectSelectInfo.Type";
+ case AVC_OPCODE_DSD: return "DirectSelectData";
+ default: return "?";
+ }
+
+ if (length < 7 ||
+ data[3] != SFE_VENDOR_DE_COMPANYID_0 ||
+ data[4] != SFE_VENDOR_DE_COMPANYID_1 ||
+ data[5] != SFE_VENDOR_DE_COMPANYID_2)
+ return "Vendor";
+
+ switch (data[6]) {
+ case SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL: return "RegisterRC";
+ case SFE_VENDOR_OPCODE_LNB_CONTROL: return "LNBControl";
+ case SFE_VENDOR_OPCODE_TUNE_QPSK: return "TuneQPSK";
+ case SFE_VENDOR_OPCODE_HOST2CA: return "Host2CA";
+ case SFE_VENDOR_OPCODE_CA2HOST: return "CA2Host";
+ }
+ return "Vendor";
+}
+
+static void debug_fcp(const u8 *data, size_t length)
+{
+ unsigned int subunit_type, subunit_id, op;
+ const char *prefix = data[0] > 7 ? "FCP <- " : "FCP -> ";
+
+ if (avc_debug & AVC_DEBUG_FCP_SUBACTIONS) {
+ subunit_type = data[1] >> 3;
+ subunit_id = data[1] & 7;
+ op = subunit_type == 0x1e || subunit_id == 5 ? ~0 : data[2];
+ printk(KERN_INFO "%ssu=%x.%x l=%d: %-8s - %s\n",
+ prefix, subunit_type, subunit_id, length,
+ debug_fcp_ctype(data[0]),
+ debug_fcp_opcode(op, data, length));
+ }
+
+ if (avc_debug & AVC_DEBUG_FCP_PAYLOADS)
+ print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_NONE, 16, 1,
+ data, length, false);
+}
+
+static int __avc_write(struct firedtv *fdtv,
+ const struct avc_command_frame *c, struct avc_response_frame *r)
+{
+ int err, retry;
+
+ if (r)
+ fdtv->avc_reply_received = false;
+
+ for (retry = 0; retry < 6; retry++) {
+ if (unlikely(avc_debug))
+ debug_fcp(&c->ctype, c->length);
+
+ err = fdtv->backend->write(fdtv, FCP_COMMAND_REGISTER,
+ (void *)&c->ctype, c->length);
+ if (err) {
+ fdtv->avc_reply_received = true;
+ dev_err(fdtv->device, "FCP command write failed\n");
+ return err;
+ }
+
+ if (!r)
+ return 0;
+
+ /*
+ * AV/C specs say that answers should be sent within 150 ms.
+ * Time out after 200 ms.
+ */
+ if (wait_event_timeout(fdtv->avc_wait,
+ fdtv->avc_reply_received,
+ msecs_to_jiffies(200)) != 0) {
+ r->length = fdtv->response_length;
+ memcpy(&r->response, fdtv->response, r->length);
+
+ return 0;
+ }
+ }
+ dev_err(fdtv->device, "FCP response timed out\n");
+ return -ETIMEDOUT;
+}
+
+static int avc_write(struct firedtv *fdtv,
+ const struct avc_command_frame *c, struct avc_response_frame *r)
+{
+ int ret;
+
+ if (mutex_lock_interruptible(&fdtv->avc_mutex))
+ return -EINTR;
+
+ ret = __avc_write(fdtv, c, r);
+
+ mutex_unlock(&fdtv->avc_mutex);
+ return ret;
+}
+
+int avc_recv(struct firedtv *fdtv, void *data, size_t length)
+{
+ struct avc_response_frame *r =
+ data - offsetof(struct avc_response_frame, response);
+
+ if (unlikely(avc_debug))
+ debug_fcp(data, length);
+
+ if (length >= 8 &&
+ r->operand[0] == SFE_VENDOR_DE_COMPANYID_0 &&
+ r->operand[1] == SFE_VENDOR_DE_COMPANYID_1 &&
+ r->operand[2] == SFE_VENDOR_DE_COMPANYID_2 &&
+ r->operand[3] == SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL) {
+ if (r->response == AVC_RESPONSE_CHANGED) {
+ fdtv_handle_rc(fdtv,
+ r->operand[4] << 8 | r->operand[5]);
+ schedule_work(&fdtv->remote_ctrl_work);
+ } else if (r->response != AVC_RESPONSE_INTERIM) {
+ dev_info(fdtv->device,
+ "remote control result = %d\n", r->response);
+ }
+ return 0;
+ }
+
+ if (fdtv->avc_reply_received) {
+ dev_err(fdtv->device, "out-of-order AVC response, ignored\n");
+ return -EIO;
+ }
+
+ memcpy(fdtv->response, data, length);
+ fdtv->response_length = length;
+
+ fdtv->avc_reply_received = true;
+ wake_up(&fdtv->avc_wait);
+
+ return 0;
+}
+
+/*
+ * tuning command for setting the relative LNB frequency
+ * (not supported by the AVC standard)
+ */
+static void avc_tuner_tuneqpsk(struct firedtv *fdtv,
+ struct dvb_frontend_parameters *params,
+ struct avc_command_frame *c)
+{
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK;
+
+ c->operand[4] = (params->frequency >> 24) & 0xff;
+ c->operand[5] = (params->frequency >> 16) & 0xff;
+ c->operand[6] = (params->frequency >> 8) & 0xff;
+ c->operand[7] = params->frequency & 0xff;
+
+ c->operand[8] = ((params->u.qpsk.symbol_rate / 1000) >> 8) & 0xff;
+ c->operand[9] = (params->u.qpsk.symbol_rate / 1000) & 0xff;
+
+ switch (params->u.qpsk.fec_inner) {
+ case FEC_1_2: c->operand[10] = 0x1; break;
+ case FEC_2_3: c->operand[10] = 0x2; break;
+ case FEC_3_4: c->operand[10] = 0x3; break;
+ case FEC_5_6: c->operand[10] = 0x4; break;
+ case FEC_7_8: c->operand[10] = 0x5; break;
+ case FEC_4_5:
+ case FEC_8_9:
+ case FEC_AUTO:
+ default: c->operand[10] = 0x0;
+ }
+
+ if (fdtv->voltage == 0xff)
+ c->operand[11] = 0xff;
+ else if (fdtv->voltage == SEC_VOLTAGE_18) /* polarisation */
+ c->operand[11] = 0;
+ else
+ c->operand[11] = 1;
+
+ if (fdtv->tone == 0xff)
+ c->operand[12] = 0xff;
+ else if (fdtv->tone == SEC_TONE_ON) /* band */
+ c->operand[12] = 1;
+ else
+ c->operand[12] = 0;
+
+ if (fdtv->type == FIREDTV_DVB_S2) {
+ c->operand[13] = 0x1;
+ c->operand[14] = 0xff;
+ c->operand[15] = 0xff;
+ c->length = 20;
+ } else {
+ c->length = 16;
+ }
+}
+
+static void avc_tuner_dsd_dvb_c(struct dvb_frontend_parameters *params,
+ struct avc_command_frame *c)
+{
+ c->opcode = AVC_OPCODE_DSD;
+
+ c->operand[0] = 0; /* source plug */
+ c->operand[1] = 0xd2; /* subfunction replace */
+ c->operand[2] = 0x20; /* system id = DVB */
+ c->operand[3] = 0x00; /* antenna number */
+ c->operand[4] = 0x11; /* system_specific_multiplex selection_length */
+
+ /* multiplex_valid_flags, high byte */
+ c->operand[5] = 0 << 7 /* reserved */
+ | 0 << 6 /* Polarisation */
+ | 0 << 5 /* Orbital_Pos */
+ | 1 << 4 /* Frequency */
+ | 1 << 3 /* Symbol_Rate */
+ | 0 << 2 /* FEC_outer */
+ | (params->u.qam.fec_inner != FEC_AUTO ? 1 << 1 : 0)
+ | (params->u.qam.modulation != QAM_AUTO ? 1 << 0 : 0);
+
+ /* multiplex_valid_flags, low byte */
+ c->operand[6] = 0 << 7 /* NetworkID */
+ | 0 << 0 /* reserved */ ;
+
+ c->operand[7] = 0x00;
+ c->operand[8] = 0x00;
+ c->operand[9] = 0x00;
+ c->operand[10] = 0x00;
+
+ c->operand[11] = (((params->frequency / 4000) >> 16) & 0xff) | (2 << 6);
+ c->operand[12] = ((params->frequency / 4000) >> 8) & 0xff;
+ c->operand[13] = (params->frequency / 4000) & 0xff;
+ c->operand[14] = ((params->u.qpsk.symbol_rate / 1000) >> 12) & 0xff;
+ c->operand[15] = ((params->u.qpsk.symbol_rate / 1000) >> 4) & 0xff;
+ c->operand[16] = ((params->u.qpsk.symbol_rate / 1000) << 4) & 0xf0;
+ c->operand[17] = 0x00;
+
+ switch (params->u.qpsk.fec_inner) {
+ case FEC_1_2: c->operand[18] = 0x1; break;
+ case FEC_2_3: c->operand[18] = 0x2; break;
+ case FEC_3_4: c->operand[18] = 0x3; break;
+ case FEC_5_6: c->operand[18] = 0x4; break;
+ case FEC_7_8: c->operand[18] = 0x5; break;
+ case FEC_8_9: c->operand[18] = 0x6; break;
+ case FEC_4_5: c->operand[18] = 0x8; break;
+ case FEC_AUTO:
+ default: c->operand[18] = 0x0;
+ }
+
+ switch (params->u.qam.modulation) {
+ case QAM_16: c->operand[19] = 0x08; break;
+ case QAM_32: c->operand[19] = 0x10; break;
+ case QAM_64: c->operand[19] = 0x18; break;
+ case QAM_128: c->operand[19] = 0x20; break;
+ case QAM_256: c->operand[19] = 0x28; break;
+ case QAM_AUTO:
+ default: c->operand[19] = 0x00;
+ }
+
+ c->operand[20] = 0x00;
+ c->operand[21] = 0x00;
+ /* Nr_of_dsd_sel_specs = 0 -> no PIDs are transmitted */
+ c->operand[22] = 0x00;
+
+ c->length = 28;
+}
+
+static void avc_tuner_dsd_dvb_t(struct dvb_frontend_parameters *params,
+ struct avc_command_frame *c)
+{
+ struct dvb_ofdm_parameters *ofdm = ¶ms->u.ofdm;
+
+ c->opcode = AVC_OPCODE_DSD;
+
+ c->operand[0] = 0; /* source plug */
+ c->operand[1] = 0xd2; /* subfunction replace */
+ c->operand[2] = 0x20; /* system id = DVB */
+ c->operand[3] = 0x00; /* antenna number */
+ c->operand[4] = 0x0c; /* system_specific_multiplex selection_length */
+
+ /* multiplex_valid_flags, high byte */
+ c->operand[5] =
+ 0 << 7 /* reserved */
+ | 1 << 6 /* CenterFrequency */
+ | (ofdm->bandwidth != BANDWIDTH_AUTO ? 1 << 5 : 0)
+ | (ofdm->constellation != QAM_AUTO ? 1 << 4 : 0)
+ | (ofdm->hierarchy_information != HIERARCHY_AUTO ? 1 << 3 : 0)
+ | (ofdm->code_rate_HP != FEC_AUTO ? 1 << 2 : 0)
+ | (ofdm->code_rate_LP != FEC_AUTO ? 1 << 1 : 0)
+ | (ofdm->guard_interval != GUARD_INTERVAL_AUTO ? 1 << 0 : 0);
+
+ /* multiplex_valid_flags, low byte */
+ c->operand[6] =
+ 0 << 7 /* NetworkID */
+ | (ofdm->transmission_mode != TRANSMISSION_MODE_AUTO ? 1 << 6 : 0)
+ | 0 << 5 /* OtherFrequencyFlag */
+ | 0 << 0 /* reserved */ ;
+
+ c->operand[7] = 0x0;
+ c->operand[8] = (params->frequency / 10) >> 24;
+ c->operand[9] = ((params->frequency / 10) >> 16) & 0xff;
+ c->operand[10] = ((params->frequency / 10) >> 8) & 0xff;
+ c->operand[11] = (params->frequency / 10) & 0xff;
+
+ switch (ofdm->bandwidth) {
+ case BANDWIDTH_7_MHZ: c->operand[12] = 0x20; break;
+ case BANDWIDTH_8_MHZ:
+ case BANDWIDTH_6_MHZ: /* not defined by AVC spec */
+ case BANDWIDTH_AUTO:
+ default: c->operand[12] = 0x00;
+ }
+
+ switch (ofdm->constellation) {
+ case QAM_16: c->operand[13] = 1 << 6; break;
+ case QAM_64: c->operand[13] = 2 << 6; break;
+ case QPSK:
+ default: c->operand[13] = 0x00;
+ }
+
+ switch (ofdm->hierarchy_information) {
+ case HIERARCHY_1: c->operand[13] |= 1 << 3; break;
+ case HIERARCHY_2: c->operand[13] |= 2 << 3; break;
+ case HIERARCHY_4: c->operand[13] |= 3 << 3; break;
+ case HIERARCHY_AUTO:
+ case HIERARCHY_NONE:
+ default: break;
+ }
+
+ switch (ofdm->code_rate_HP) {
+ case FEC_2_3: c->operand[13] |= 1; break;
+ case FEC_3_4: c->operand[13] |= 2; break;
+ case FEC_5_6: c->operand[13] |= 3; break;
+ case FEC_7_8: c->operand[13] |= 4; break;
+ case FEC_1_2:
+ default: break;
+ }
+
+ switch (ofdm->code_rate_LP) {
+ case FEC_2_3: c->operand[14] = 1 << 5; break;
+ case FEC_3_4: c->operand[14] = 2 << 5; break;
+ case FEC_5_6: c->operand[14] = 3 << 5; break;
+ case FEC_7_8: c->operand[14] = 4 << 5; break;
+ case FEC_1_2:
+ default: c->operand[14] = 0x00; break;
+ }
+
+ switch (ofdm->guard_interval) {
+ case GUARD_INTERVAL_1_16: c->operand[14] |= 1 << 3; break;
+ case GUARD_INTERVAL_1_8: c->operand[14] |= 2 << 3; break;
+ case GUARD_INTERVAL_1_4: c->operand[14] |= 3 << 3; break;
+ case GUARD_INTERVAL_1_32:
+ case GUARD_INTERVAL_AUTO:
+ default: break;
+ }
+
+ switch (ofdm->transmission_mode) {
+ case TRANSMISSION_MODE_8K: c->operand[14] |= 1 << 1; break;
+ case TRANSMISSION_MODE_2K:
+ case TRANSMISSION_MODE_AUTO:
+ default: break;
+ }
+
+ c->operand[15] = 0x00; /* network_ID[0] */
+ c->operand[16] = 0x00; /* network_ID[1] */
+ /* Nr_of_dsd_sel_specs = 0 -> no PIDs are transmitted */
+ c->operand[17] = 0x00;
+
+ c->length = 24;
+}
+
+int avc_tuner_dsd(struct firedtv *fdtv,
+ struct dvb_frontend_parameters *params)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+
+ switch (fdtv->type) {
+ case FIREDTV_DVB_S:
+ case FIREDTV_DVB_S2: avc_tuner_tuneqpsk(fdtv, params, c); break;
+ case FIREDTV_DVB_C: avc_tuner_dsd_dvb_c(params, c); break;
+ case FIREDTV_DVB_T: avc_tuner_dsd_dvb_t(params, c); break;
+ default:
+ BUG();
+ }
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ msleep(500);
+#if 0
+ /* FIXME: */
+ /* u8 *status was an out-parameter of avc_tuner_dsd, unused by caller */
+ if (status)
+ *status = r->operand[2];
+#endif
+ return 0;
+}
+
+int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[])
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+ int pos, k;
+
+ if (pidc > 16 && pidc != 0xff)
+ return -EINVAL;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_DSD;
+
+ c->operand[0] = 0; /* source plug */
+ c->operand[1] = 0xd2; /* subfunction replace */
+ c->operand[2] = 0x20; /* system id = DVB */
+ c->operand[3] = 0x00; /* antenna number */
+ c->operand[4] = 0x00; /* system_specific_multiplex selection_length */
+ c->operand[5] = pidc; /* Nr_of_dsd_sel_specs */
+
+ pos = 6;
+ if (pidc != 0xff)
+ for (k = 0; k < pidc; k++) {
+ c->operand[pos++] = 0x13; /* flowfunction relay */
+ c->operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */
+ c->operand[pos++] = (pid[k] >> 8) & 0x1f;
+ c->operand[pos++] = pid[k] & 0xff;
+ c->operand[pos++] = 0x00; /* tableID */
+ c->operand[pos++] = 0x00; /* filter_length */
+ }
+
+ c->length = ALIGN(3 + pos, 4);
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ msleep(50);
+ return 0;
+}
+
+int avc_tuner_get_ts(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+ int sl;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_DSIT;
+
+ sl = fdtv->type == FIREDTV_DVB_T ? 0x0c : 0x11;
+
+ c->operand[0] = 0; /* source plug */
+ c->operand[1] = 0xd2; /* subfunction replace */
+ c->operand[2] = 0xff; /* status */
+ c->operand[3] = 0x20; /* system id = DVB */
+ c->operand[4] = 0x00; /* antenna number */
+ c->operand[5] = 0x0; /* system_specific_search_flags */
+ c->operand[6] = sl; /* system_specific_multiplex selection_length */
+ c->operand[7] = 0x00; /* valid_flags [0] */
+ c->operand[8] = 0x00; /* valid_flags [1] */
+ c->operand[7 + sl] = 0x00; /* nr_of_dsit_sel_specs (always 0) */
+
+ c->length = fdtv->type == FIREDTV_DVB_T ? 24 : 28;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ msleep(250);
+ return 0;
+}
+
+int avc_identify_subunit(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_READ_DESCRIPTOR;
+
+ c->operand[0] = DESCRIPTOR_SUBUNIT_IDENTIFIER;
+ c->operand[1] = 0xff;
+ c->operand[2] = 0x00;
+ c->operand[3] = 0x00; /* length highbyte */
+ c->operand[4] = 0x08; /* length lowbyte */
+ c->operand[5] = 0x00; /* offset highbyte */
+ c->operand[6] = 0x0d; /* offset lowbyte */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ if ((r->response != AVC_RESPONSE_STABLE &&
+ r->response != AVC_RESPONSE_ACCEPTED) ||
+ (r->operand[3] << 8) + r->operand[4] != 8) {
+ dev_err(fdtv->device, "cannot read subunit identifier\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+#define SIZEOF_ANTENNA_INPUT_INFO 22
+
+int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int length;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_READ_DESCRIPTOR;
+
+ c->operand[0] = DESCRIPTOR_TUNER_STATUS;
+ c->operand[1] = 0xff; /* read_result_status */
+ c->operand[2] = 0x00; /* reserved */
+ c->operand[3] = 0; /* SIZEOF_ANTENNA_INPUT_INFO >> 8; */
+ c->operand[4] = 0; /* SIZEOF_ANTENNA_INPUT_INFO & 0xff; */
+ c->operand[5] = 0x00;
+ c->operand[6] = 0x00;
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ if (r->response != AVC_RESPONSE_STABLE &&
+ r->response != AVC_RESPONSE_ACCEPTED) {
+ dev_err(fdtv->device, "cannot read tuner status\n");
+ return -EINVAL;
+ }
+
+ length = r->operand[9];
+ if (r->operand[1] != 0x10 || length != SIZEOF_ANTENNA_INPUT_INFO) {
+ dev_err(fdtv->device, "got invalid tuner status\n");
+ return -EINVAL;
+ }
+
+ stat->active_system = r->operand[10];
+ stat->searching = r->operand[11] >> 7 & 1;
+ stat->moving = r->operand[11] >> 6 & 1;
+ stat->no_rf = r->operand[11] >> 5 & 1;
+ stat->input = r->operand[12] >> 7 & 1;
+ stat->selected_antenna = r->operand[12] & 0x7f;
+ stat->ber = r->operand[13] << 24 |
+ r->operand[14] << 16 |
+ r->operand[15] << 8 |
+ r->operand[16];
+ stat->signal_strength = r->operand[17];
+ stat->raster_frequency = r->operand[18] >> 6 & 2;
+ stat->rf_frequency = (r->operand[18] & 0x3f) << 16 |
+ r->operand[19] << 8 |
+ r->operand[20];
+ stat->man_dep_info_length = r->operand[21];
+ stat->front_end_error = r->operand[22] >> 4 & 1;
+ stat->antenna_error = r->operand[22] >> 3 & 1;
+ stat->front_end_power_status = r->operand[22] >> 1 & 1;
+ stat->power_supply = r->operand[22] & 1;
+ stat->carrier_noise_ratio = r->operand[23] << 8 |
+ r->operand[24];
+ stat->power_supply_voltage = r->operand[27];
+ stat->antenna_voltage = r->operand[28];
+ stat->firewire_bus_voltage = r->operand[29];
+ stat->ca_mmi = r->operand[30] & 1;
+ stat->ca_pmt_reply = r->operand[31] >> 7 & 1;
+ stat->ca_date_time_request = r->operand[31] >> 6 & 1;
+ stat->ca_application_info = r->operand[31] >> 5 & 1;
+ stat->ca_module_present_status = r->operand[31] >> 4 & 1;
+ stat->ca_dvb_flag = r->operand[31] >> 3 & 1;
+ stat->ca_error_flag = r->operand[31] >> 2 & 1;
+ stat->ca_initialization_status = r->operand[31] >> 1 & 1;
+
+ return 0;
+}
+
+int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
+ char conttone, char nrdiseq,
+ struct dvb_diseqc_master_cmd *diseqcmd)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int i, j, k;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_LNB_CONTROL;
+
+ c->operand[4] = voltage;
+ c->operand[5] = nrdiseq;
+
+ i = 6;
+
+ for (j = 0; j < nrdiseq; j++) {
+ c->operand[i++] = diseqcmd[j].msg_len;
+
+ for (k = 0; k < diseqcmd[j].msg_len; k++)
+ c->operand[i++] = diseqcmd[j].msg[k];
+ }
+
+ c->operand[i++] = burst;
+ c->operand[i++] = conttone;
+
+ c->length = ALIGN(3 + i, 4);
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ if (r->response != AVC_RESPONSE_ACCEPTED) {
+ dev_err(fdtv->device, "LNB control failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int avc_register_remote_control(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_NOTIFY;
+ c->subunit = AVC_SUBUNIT_TYPE_UNIT | 7;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
+
+ c->length = 8;
+
+ return avc_write(fdtv, c, NULL);
+}
+
+void avc_remote_ctrl_work(struct work_struct *work)
+{
+ struct firedtv *fdtv =
+ container_of(work, struct firedtv, remote_ctrl_work);
+
+ /* Should it be rescheduled in failure cases? */
+ avc_register_remote_control(fdtv);
+}
+
+#if 0 /* FIXME: unused */
+int avc_tuner_host2ca(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 0; /* length */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ return 0;
+}
+#endif
+
+static int get_ca_object_pos(struct avc_response_frame *r)
+{
+ int length = 1;
+
+ /* Check length of length field */
+ if (r->operand[7] & 0x80)
+ length = (r->operand[7] & 0x7f) + 1;
+ return length + 7;
+}
+
+static int get_ca_object_length(struct avc_response_frame *r)
+{
+#if 0 /* FIXME: unused */
+ int size = 0;
+ int i;
+
+ if (r->operand[7] & 0x80)
+ for (i = 0; i < (r->operand[7] & 0x7f); i++) {
+ size <<= 8;
+ size += r->operand[8 + i];
+ }
+#endif
+ return r->operand[7];
+}
+
+int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int pos;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ /* FIXME: check response code and validate response data */
+
+ pos = get_ca_object_pos(r);
+ app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
+ app_info[1] = (EN50221_TAG_APP_INFO >> 8) & 0xff;
+ app_info[2] = (EN50221_TAG_APP_INFO >> 0) & 0xff;
+ app_info[3] = 6 + r->operand[pos + 4];
+ app_info[4] = 0x01;
+ memcpy(&app_info[5], &r->operand[pos], 5 + r->operand[pos + 4]);
+ *len = app_info[3] + 4;
+
+ return 0;
+}
+
+int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int pos;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ pos = get_ca_object_pos(r);
+ app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
+ app_info[1] = (EN50221_TAG_CA_INFO >> 8) & 0xff;
+ app_info[2] = (EN50221_TAG_CA_INFO >> 0) & 0xff;
+ app_info[3] = 2;
+ app_info[4] = r->operand[pos + 0];
+ app_info[5] = r->operand[pos + 1];
+ *len = app_info[3] + 4;
+
+ return 0;
+}
+
+int avc_ca_reset(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_RESET; /* ca tag */
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 1; /* length */
+ c->operand[8] = 0; /* force hardware reset */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ return 0;
+}
+
+int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int list_management;
+ int program_info_length;
+ int pmt_cmd_id;
+ int read_pos;
+ int write_pos;
+ int es_info_length;
+ int crc32_csum;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ if (msg[0] != EN50221_LIST_MANAGEMENT_ONLY) {
+ dev_info(fdtv->device, "forcing list_management to ONLY\n");
+ msg[0] = EN50221_LIST_MANAGEMENT_ONLY;
+ }
+ /* We take the cmd_id from the programme level only! */
+ list_management = msg[0];
+ program_info_length = ((msg[4] & 0x0f) << 8) + msg[5];
+ if (program_info_length > 0)
+ program_info_length--; /* Remove pmt_cmd_id */
+ pmt_cmd_id = msg[6];
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */
+ c->operand[6] = 0; /* more/last */
+ /* c->operand[7] = XXXprogram_info_length + 17; */ /* length */
+ c->operand[8] = list_management;
+ c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */
+
+ /* TS program map table */
+
+ c->operand[10] = 0x02; /* Table id=2 */
+ c->operand[11] = 0x80; /* Section syntax + length */
+ /* c->operand[12] = XXXprogram_info_length + 12; */
+ c->operand[13] = msg[1]; /* Program number */
+ c->operand[14] = msg[2];
+ c->operand[15] = 0x01; /* Version number=0 + current/next=1 */
+ c->operand[16] = 0x00; /* Section number=0 */
+ c->operand[17] = 0x00; /* Last section number=0 */
+ c->operand[18] = 0x1f; /* PCR_PID=1FFF */
+ c->operand[19] = 0xff;
+ c->operand[20] = (program_info_length >> 8); /* Program info length */
+ c->operand[21] = (program_info_length & 0xff);
+
+ /* CA descriptors at programme level */
+ read_pos = 6;
+ write_pos = 22;
+ if (program_info_length > 0) {
+ pmt_cmd_id = msg[read_pos++];
+ if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
+ dev_err(fdtv->device,
+ "invalid pmt_cmd_id %d\n", pmt_cmd_id);
+
+ memcpy(&c->operand[write_pos], &msg[read_pos],
+ program_info_length);
+ read_pos += program_info_length;
+ write_pos += program_info_length;
+ }
+ while (read_pos < length) {
+ c->operand[write_pos++] = msg[read_pos++];
+ c->operand[write_pos++] = msg[read_pos++];
+ c->operand[write_pos++] = msg[read_pos++];
+ es_info_length =
+ ((msg[read_pos] & 0x0f) << 8) + msg[read_pos + 1];
+ read_pos += 2;
+ if (es_info_length > 0)
+ es_info_length--; /* Remove pmt_cmd_id */
+ c->operand[write_pos++] = es_info_length >> 8;
+ c->operand[write_pos++] = es_info_length & 0xff;
+ if (es_info_length > 0) {
+ pmt_cmd_id = msg[read_pos++];
+ if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
+ dev_err(fdtv->device, "invalid pmt_cmd_id %d "
+ "at stream level\n", pmt_cmd_id);
+
+ memcpy(&c->operand[write_pos], &msg[read_pos],
+ es_info_length);
+ read_pos += es_info_length;
+ write_pos += es_info_length;
+ }
+ }
+
+ /* CRC */
+ c->operand[write_pos++] = 0x00;
+ c->operand[write_pos++] = 0x00;
+ c->operand[write_pos++] = 0x00;
+ c->operand[write_pos++] = 0x00;
+
+ c->operand[7] = write_pos - 8;
+ c->operand[12] = write_pos - 13;
+
+ crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1);
+ c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff;
+ c->operand[write_pos - 3] = (crc32_csum >> 16) & 0xff;
+ c->operand[write_pos - 2] = (crc32_csum >> 8) & 0xff;
+ c->operand[write_pos - 1] = (crc32_csum >> 0) & 0xff;
+
+ c->length = ALIGN(3 + write_pos, 4);
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ if (r->response != AVC_RESPONSE_ACCEPTED) {
+ dev_err(fdtv->device,
+ "CA PMT failed with response 0x%x\n", r->response);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+int avc_ca_get_time_date(struct firedtv *fdtv, int *interval)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_DATE_TIME; /* ca tag */
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 0; /* length */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ /* FIXME: check response code and validate response data */
+
+ *interval = r->operand[get_ca_object_pos(r)];
+
+ return 0;
+}
+
+int avc_ca_enter_menu(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_ENTER_MENU;
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 0; /* length */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ return 0;
+}
+
+int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_MMI;
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 0; /* length */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ /* FIXME: check response code and validate response data */
+
+ *len = get_ca_object_length(r);
+ memcpy(mmi_object, &r->operand[get_ca_object_pos(r)], *len);
+
+ return 0;
+}
+
+#define CMP_OUTPUT_PLUG_CONTROL_REG_0 0xfffff0000904ULL
+
+static int cmp_read(struct firedtv *fdtv, void *buf, u64 addr, size_t len)
+{
+ int ret;
+
+ if (mutex_lock_interruptible(&fdtv->avc_mutex))
+ return -EINTR;
+
+ ret = fdtv->backend->read(fdtv, addr, buf, len);
+ if (ret < 0)
+ dev_err(fdtv->device, "CMP: read I/O error\n");
+
+ mutex_unlock(&fdtv->avc_mutex);
+ return ret;
+}
+
+static int cmp_lock(struct firedtv *fdtv, void *data, u64 addr, __be32 arg)
+{
+ int ret;
+
+ if (mutex_lock_interruptible(&fdtv->avc_mutex))
+ return -EINTR;
+
+ ret = fdtv->backend->lock(fdtv, addr, data, arg);
+ if (ret < 0)
+ dev_err(fdtv->device, "CMP: lock I/O error\n");
+
+ mutex_unlock(&fdtv->avc_mutex);
+ return ret;
+}
+
+static inline u32 get_opcr(__be32 opcr, u32 mask, u32 shift)
+{
+ return (be32_to_cpu(opcr) >> shift) & mask;
+}
+
+static inline void set_opcr(__be32 *opcr, u32 value, u32 mask, u32 shift)
+{
+ *opcr &= ~cpu_to_be32(mask << shift);
+ *opcr |= cpu_to_be32((value & mask) << shift);
+}
+
+#define get_opcr_online(v) get_opcr((v), 0x1, 31)
+#define get_opcr_p2p_connections(v) get_opcr((v), 0x3f, 24)
+#define get_opcr_channel(v) get_opcr((v), 0x3f, 16)
+
+#define set_opcr_p2p_connections(p, v) set_opcr((p), (v), 0x3f, 24)
+#define set_opcr_channel(p, v) set_opcr((p), (v), 0x3f, 16)
+#define set_opcr_data_rate(p, v) set_opcr((p), (v), 0x3, 14)
+#define set_opcr_overhead_id(p, v) set_opcr((p), (v), 0xf, 10)
+
+int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel)
+{
+ __be32 old_opcr, opcr;
+ u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
+ int attempts = 0;
+ int ret;
+
+ ret = cmp_read(fdtv, &opcr, opcr_address, 4);
+ if (ret < 0)
+ return ret;
+
+repeat:
+ if (!get_opcr_online(opcr)) {
+ dev_err(fdtv->device, "CMP: output offline\n");
+ return -EBUSY;
+ }
+
+ old_opcr = opcr;
+
+ if (get_opcr_p2p_connections(opcr)) {
+ if (get_opcr_channel(opcr) != channel) {
+ dev_err(fdtv->device, "CMP: cannot change channel\n");
+ return -EBUSY;
+ }
+ dev_info(fdtv->device, "CMP: overlaying connection\n");
+
+ /* We don't allocate isochronous resources. */
+ } else {
+ set_opcr_channel(&opcr, channel);
+ set_opcr_data_rate(&opcr, 2); /* S400 */
+
+ /* FIXME: this is for the worst case - optimize */
+ set_opcr_overhead_id(&opcr, 0);
+
+ /*
+ * FIXME: allocate isochronous channel and bandwidth at IRM
+ * fdtv->backend->alloc_resources(fdtv, channels_mask, bw);
+ */
+ }
+
+ set_opcr_p2p_connections(&opcr, get_opcr_p2p_connections(opcr) + 1);
+
+ ret = cmp_lock(fdtv, &opcr, opcr_address, old_opcr);
+ if (ret < 0)
+ return ret;
+
+ if (old_opcr != opcr) {
+ /*
+ * FIXME: if old_opcr.P2P_Connections > 0,
+ * deallocate isochronous channel and bandwidth at IRM
+ * if (...)
+ * fdtv->backend->dealloc_resources(fdtv, channel, bw);
+ */
+
+ if (++attempts < 6) /* arbitrary limit */
+ goto repeat;
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel)
+{
+ __be32 old_opcr, opcr;
+ u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
+ int attempts = 0;
+
+ if (cmp_read(fdtv, &opcr, opcr_address, 4) < 0)
+ return;
+
+repeat:
+ if (!get_opcr_online(opcr) || !get_opcr_p2p_connections(opcr) ||
+ get_opcr_channel(opcr) != channel) {
+ dev_err(fdtv->device, "CMP: no connection to break\n");
+ return;
+ }
+
+ old_opcr = opcr;
+ set_opcr_p2p_connections(&opcr, get_opcr_p2p_connections(opcr) - 1);
+
+ if (cmp_lock(fdtv, &opcr, opcr_address, old_opcr) < 0)
+ return;
+
+ if (old_opcr != opcr) {
+ /*
+ * FIXME: if old_opcr.P2P_Connections == 1, i.e. we were last
+ * owner, deallocate isochronous channel and bandwidth at IRM
+ * if (...)
+ * fdtv->backend->dealloc_resources(fdtv, channel, bw);
+ */
+
+ if (++attempts < 6) /* arbitrary limit */
+ goto repeat;
+ }
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/dvb/ca.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+
+#include <dvbdev.h>
+
+#include "firedtv.h"
+
+#define EN50221_TAG_APP_INFO_ENQUIRY 0x9f8020
+#define EN50221_TAG_CA_INFO_ENQUIRY 0x9f8030
+#define EN50221_TAG_CA_PMT 0x9f8032
+#define EN50221_TAG_ENTER_MENU 0x9f8022
+
+static int fdtv_ca_ready(struct firedtv_tuner_status *stat)
+{
+ return stat->ca_initialization_status == 1 &&
+ stat->ca_error_flag == 0 &&
+ stat->ca_dvb_flag == 1 &&
+ stat->ca_module_present_status == 1;
+}
+
+static int fdtv_get_ca_flags(struct firedtv_tuner_status *stat)
+{
+ int flags = 0;
+
+ if (stat->ca_module_present_status == 1)
+ flags |= CA_CI_MODULE_PRESENT;
+ if (stat->ca_initialization_status == 1 &&
+ stat->ca_error_flag == 0 &&
+ stat->ca_dvb_flag == 1)
+ flags |= CA_CI_MODULE_READY;
+ return flags;
+}
+
+static int fdtv_ca_reset(struct firedtv *fdtv)
+{
+ return avc_ca_reset(fdtv) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_get_caps(void *arg)
+{
+ struct ca_caps *cap = arg;
+
+ cap->slot_num = 1;
+ cap->slot_type = CA_CI;
+ cap->descr_num = 1;
+ cap->descr_type = CA_ECD;
+ return 0;
+}
+
+static int fdtv_ca_get_slot_info(struct firedtv *fdtv, void *arg)
+{
+ struct firedtv_tuner_status stat;
+ struct ca_slot_info *slot = arg;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EFAULT;
+
+ if (slot->num != 0)
+ return -EFAULT;
+
+ slot->type = CA_CI;
+ slot->flags = fdtv_get_ca_flags(&stat);
+ return 0;
+}
+
+static int fdtv_ca_app_info(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *reply = arg;
+
+ return avc_ca_app_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_info(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *reply = arg;
+
+ return avc_ca_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_get_mmi(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *reply = arg;
+
+ return avc_ca_get_mmi(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg)
+{
+ struct firedtv_tuner_status stat;
+ int err;
+
+ switch (fdtv->ca_last_command) {
+ case EN50221_TAG_APP_INFO_ENQUIRY:
+ err = fdtv_ca_app_info(fdtv, arg);
+ break;
+ case EN50221_TAG_CA_INFO_ENQUIRY:
+ err = fdtv_ca_info(fdtv, arg);
+ break;
+ default:
+ if (avc_tuner_status(fdtv, &stat))
+ err = -EFAULT;
+ else if (stat.ca_mmi == 1)
+ err = fdtv_ca_get_mmi(fdtv, arg);
+ else {
+ dev_info(fdtv->device, "unhandled CA message 0x%08x\n",
+ fdtv->ca_last_command);
+ err = -EFAULT;
+ }
+ }
+ fdtv->ca_last_command = 0;
+ return err;
+}
+
+static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *msg = arg;
+ int data_pos;
+ int data_length;
+ int i;
+
+ data_pos = 4;
+ if (msg->msg[3] & 0x80) {
+ data_length = 0;
+ for (i = 0; i < (msg->msg[3] & 0x7f); i++)
+ data_length = (data_length << 8) + msg->msg[data_pos++];
+ } else {
+ data_length = msg->msg[3];
+ }
+
+ return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *msg = arg;
+ int err;
+
+ /* Do we need a semaphore for this? */
+ fdtv->ca_last_command =
+ (msg->msg[0] << 16) + (msg->msg[1] << 8) + msg->msg[2];
+ switch (fdtv->ca_last_command) {
+ case EN50221_TAG_CA_PMT:
+ err = fdtv_ca_pmt(fdtv, arg);
+ break;
+ case EN50221_TAG_APP_INFO_ENQUIRY:
+ /* handled in ca_get_msg */
+ err = 0;
+ break;
+ case EN50221_TAG_CA_INFO_ENQUIRY:
+ /* handled in ca_get_msg */
+ err = 0;
+ break;
+ case EN50221_TAG_ENTER_MENU:
+ err = avc_ca_enter_menu(fdtv);
+ break;
+ default:
+ dev_err(fdtv->device, "unhandled CA message 0x%08x\n",
+ fdtv->ca_last_command);
+ err = -EFAULT;
+ }
+ return err;
+}
+
+static int fdtv_ca_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ struct dvb_device *dvbdev = file->private_data;
+ struct firedtv *fdtv = dvbdev->priv;
+ struct firedtv_tuner_status stat;
+ int err;
+
+ switch (cmd) {
+ case CA_RESET:
+ err = fdtv_ca_reset(fdtv);
+ break;
+ case CA_GET_CAP:
+ err = fdtv_ca_get_caps(arg);
+ break;
+ case CA_GET_SLOT_INFO:
+ err = fdtv_ca_get_slot_info(fdtv, arg);
+ break;
+ case CA_GET_MSG:
+ err = fdtv_ca_get_msg(fdtv, arg);
+ break;
+ case CA_SEND_MSG:
+ err = fdtv_ca_send_msg(fdtv, arg);
+ break;
+ default:
+ dev_info(fdtv->device, "unhandled CA ioctl %u\n", cmd);
+ err = -EOPNOTSUPP;
+ }
+
+ /* FIXME Is this necessary? */
+ avc_tuner_status(fdtv, &stat);
+
+ return err;
+}
+
+static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait)
+{
+ return POLLIN;
+}
+
+static struct file_operations fdtv_ca_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = dvb_generic_ioctl,
+ .open = dvb_generic_open,
+ .release = dvb_generic_release,
+ .poll = fdtv_ca_io_poll,
+};
+
+static struct dvb_device fdtv_ca = {
+ .users = 1,
+ .readers = 1,
+ .writers = 1,
+ .fops = &fdtv_ca_fops,
+ .kernel_ioctl = fdtv_ca_ioctl,
+};
+
+int fdtv_ca_register(struct firedtv *fdtv)
+{
+ struct firedtv_tuner_status stat;
+ int err;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ if (!fdtv_ca_ready(&stat))
+ return -EFAULT;
+
+ err = dvb_register_device(&fdtv->adapter, &fdtv->cadev,
+ &fdtv_ca, fdtv, DVB_DEVICE_CA);
+
+ if (stat.ca_application_info == 0)
+ dev_err(fdtv->device, "CaApplicationInfo is not set\n");
+ if (stat.ca_date_time_request == 1)
+ avc_ca_get_time_date(fdtv, &fdtv->ca_time_interval);
+
+ return err;
+}
+
+void fdtv_ca_release(struct firedtv *fdtv)
+{
+ if (fdtv->cadev)
+ dvb_unregister_device(fdtv->cadev);
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <dmxdev.h>
+#include <dvb_demux.h>
+#include <dvbdev.h>
+#include <dvb_frontend.h>
+
+#include "firedtv.h"
+
+static int alloc_channel(struct firedtv *fdtv)
+{
+ int i;
+
+ for (i = 0; i < 16; i++)
+ if (!__test_and_set_bit(i, &fdtv->channel_active))
+ break;
+ return i;
+}
+
+static void collect_channels(struct firedtv *fdtv, int *pidc, u16 pid[])
+{
+ int i, n;
+
+ for (i = 0, n = 0; i < 16; i++)
+ if (test_bit(i, &fdtv->channel_active))
+ pid[n++] = fdtv->channel_pid[i];
+ *pidc = n;
+}
+
+static inline void dealloc_channel(struct firedtv *fdtv, int i)
+{
+ __clear_bit(i, &fdtv->channel_active);
+}
+
+int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct firedtv *fdtv = dvbdmxfeed->demux->priv;
+ int pidc, c, ret;
+ u16 pids[16];
+
+ switch (dvbdmxfeed->type) {
+ case DMX_TYPE_TS:
+ case DMX_TYPE_SEC:
+ break;
+ default:
+ dev_err(fdtv->device, "can't start dmx feed: invalid type %u\n",
+ dvbdmxfeed->type);
+ return -EINVAL;
+ }
+
+ if (mutex_lock_interruptible(&fdtv->demux_mutex))
+ return -EINTR;
+
+ if (dvbdmxfeed->type == DMX_TYPE_TS) {
+ switch (dvbdmxfeed->pes_type) {
+ case DMX_TS_PES_VIDEO:
+ case DMX_TS_PES_AUDIO:
+ case DMX_TS_PES_TELETEXT:
+ case DMX_TS_PES_PCR:
+ case DMX_TS_PES_OTHER:
+ c = alloc_channel(fdtv);
+ break;
+ default:
+ dev_err(fdtv->device,
+ "can't start dmx feed: invalid pes type %u\n",
+ dvbdmxfeed->pes_type);
+ ret = -EINVAL;
+ goto out;
+ }
+ } else {
+ c = alloc_channel(fdtv);
+ }
+
+ if (c > 15) {
+ dev_err(fdtv->device, "can't start dmx feed: busy\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ dvbdmxfeed->priv = (typeof(dvbdmxfeed->priv))(unsigned long)c;
+ fdtv->channel_pid[c] = dvbdmxfeed->pid;
+ collect_channels(fdtv, &pidc, pids);
+
+ if (dvbdmxfeed->pid == 8192) {
+ ret = avc_tuner_get_ts(fdtv);
+ if (ret) {
+ dealloc_channel(fdtv, c);
+ dev_err(fdtv->device, "can't get TS\n");
+ goto out;
+ }
+ } else {
+ ret = avc_tuner_set_pids(fdtv, pidc, pids);
+ if (ret) {
+ dealloc_channel(fdtv, c);
+ dev_err(fdtv->device, "can't set PIDs\n");
+ goto out;
+ }
+ }
+out:
+ mutex_unlock(&fdtv->demux_mutex);
+
+ return ret;
+}
+
+int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *demux = dvbdmxfeed->demux;
+ struct firedtv *fdtv = demux->priv;
+ int pidc, c, ret;
+ u16 pids[16];
+
+ if (dvbdmxfeed->type == DMX_TYPE_TS &&
+ !((dvbdmxfeed->ts_type & TS_PACKET) &&
+ (demux->dmx.frontend->source != DMX_MEMORY_FE))) {
+
+ if (dvbdmxfeed->ts_type & TS_DECODER) {
+ if (dvbdmxfeed->pes_type >= DMX_TS_PES_OTHER ||
+ !demux->pesfilter[dvbdmxfeed->pes_type])
+ return -EINVAL;
+
+ demux->pids[dvbdmxfeed->pes_type] |= 0x8000;
+ demux->pesfilter[dvbdmxfeed->pes_type] = NULL;
+ }
+
+ if (!(dvbdmxfeed->ts_type & TS_DECODER &&
+ dvbdmxfeed->pes_type < DMX_TS_PES_OTHER))
+ return 0;
+ }
+
+ if (mutex_lock_interruptible(&fdtv->demux_mutex))
+ return -EINTR;
+
+ c = (unsigned long)dvbdmxfeed->priv;
+ dealloc_channel(fdtv, c);
+ collect_channels(fdtv, &pidc, pids);
+
+ ret = avc_tuner_set_pids(fdtv, pidc, pids);
+
+ mutex_unlock(&fdtv->demux_mutex);
+
+ return ret;
+}
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int fdtv_dvb_register(struct firedtv *fdtv)
+{
+ int err;
+
+ err = dvb_register_adapter(&fdtv->adapter, fdtv_model_names[fdtv->type],
+ THIS_MODULE, fdtv->device, adapter_nr);
+ if (err < 0)
+ goto fail_log;
+
+ /*DMX_TS_FILTERING | DMX_SECTION_FILTERING*/
+ fdtv->demux.dmx.capabilities = 0;
+
+ fdtv->demux.priv = fdtv;
+ fdtv->demux.filternum = 16;
+ fdtv->demux.feednum = 16;
+ fdtv->demux.start_feed = fdtv_start_feed;
+ fdtv->demux.stop_feed = fdtv_stop_feed;
+ fdtv->demux.write_to_decoder = NULL;
+
+ err = dvb_dmx_init(&fdtv->demux);
+ if (err)
+ goto fail_unreg_adapter;
+
+ fdtv->dmxdev.filternum = 16;
+ fdtv->dmxdev.demux = &fdtv->demux.dmx;
+ fdtv->dmxdev.capabilities = 0;
+
+ err = dvb_dmxdev_init(&fdtv->dmxdev, &fdtv->adapter);
+ if (err)
+ goto fail_dmx_release;
+
+ fdtv->frontend.source = DMX_FRONTEND_0;
+
+ err = fdtv->demux.dmx.add_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+ if (err)
+ goto fail_dmxdev_release;
+
+ err = fdtv->demux.dmx.connect_frontend(&fdtv->demux.dmx,
+ &fdtv->frontend);
+ if (err)
+ goto fail_rem_frontend;
+
+ dvb_net_init(&fdtv->adapter, &fdtv->dvbnet, &fdtv->demux.dmx);
+
+ fdtv_frontend_init(fdtv);
+ err = dvb_register_frontend(&fdtv->adapter, &fdtv->fe);
+ if (err)
+ goto fail_net_release;
+
+ err = fdtv_ca_register(fdtv);
+ if (err)
+ dev_info(fdtv->device,
+ "Conditional Access Module not enabled\n");
+ return 0;
+
+fail_net_release:
+ dvb_net_release(&fdtv->dvbnet);
+ fdtv->demux.dmx.close(&fdtv->demux.dmx);
+fail_rem_frontend:
+ fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+fail_dmxdev_release:
+ dvb_dmxdev_release(&fdtv->dmxdev);
+fail_dmx_release:
+ dvb_dmx_release(&fdtv->demux);
+fail_unreg_adapter:
+ dvb_unregister_adapter(&fdtv->adapter);
+fail_log:
+ dev_err(fdtv->device, "DVB initialization failed\n");
+ return err;
+}
+
+void fdtv_dvb_unregister(struct firedtv *fdtv)
+{
+ fdtv_ca_release(fdtv);
+ dvb_unregister_frontend(&fdtv->fe);
+ dvb_net_release(&fdtv->dvbnet);
+ fdtv->demux.dmx.close(&fdtv->demux.dmx);
+ fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+ dvb_dmxdev_release(&fdtv->dmxdev);
+ dvb_dmx_release(&fdtv->demux);
+ dvb_unregister_adapter(&fdtv->adapter);
+}
+
+const char *fdtv_model_names[] = {
+ [FIREDTV_UNKNOWN] = "unknown type",
+ [FIREDTV_DVB_S] = "FireDTV S/CI",
+ [FIREDTV_DVB_C] = "FireDTV C/CI",
+ [FIREDTV_DVB_T] = "FireDTV T/CI",
+ [FIREDTV_DVB_S2] = "FireDTV S2 ",
+};
+
+struct firedtv *fdtv_alloc(struct device *dev,
+ const struct firedtv_backend *backend,
+ const char *name, size_t name_len)
+{
+ struct firedtv *fdtv;
+ int i;
+
+ fdtv = kzalloc(sizeof(*fdtv), GFP_KERNEL);
+ if (!fdtv)
+ return NULL;
+
+ dev->driver_data = fdtv;
+ fdtv->device = dev;
+ fdtv->isochannel = -1;
+ fdtv->voltage = 0xff;
+ fdtv->tone = 0xff;
+ fdtv->backend = backend;
+
+ mutex_init(&fdtv->avc_mutex);
+ init_waitqueue_head(&fdtv->avc_wait);
+ fdtv->avc_reply_received = true;
+ mutex_init(&fdtv->demux_mutex);
+ INIT_WORK(&fdtv->remote_ctrl_work, avc_remote_ctrl_work);
+
+ for (i = ARRAY_SIZE(fdtv_model_names); --i; )
+ if (strlen(fdtv_model_names[i]) <= name_len &&
+ strncmp(name, fdtv_model_names[i], name_len) == 0)
+ break;
+ fdtv->type = i;
+
+ return fdtv;
+}
+
+#define MATCH_FLAGS (IEEE1394_MATCH_VENDOR_ID | IEEE1394_MATCH_MODEL_ID | \
+ IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION)
+
+#define DIGITAL_EVERYWHERE_OUI 0x001287
+#define AVC_UNIT_SPEC_ID_ENTRY 0x00a02d
+#define AVC_SW_VERSION_ENTRY 0x010001
+
+static struct ieee1394_device_id fdtv_id_table[] = {
+ {
+ /* FloppyDTV S/CI and FloppyDTV S2 */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000024,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FloppyDTV T/CI */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000025,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FloppyDTV C/CI */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000026,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FireDTV S/CI and FloppyDTV S2 */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000034,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FireDTV T/CI */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000035,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FireDTV C/CI */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000036,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {}
+};
+MODULE_DEVICE_TABLE(ieee1394, fdtv_id_table);
+
+static int __init fdtv_init(void)
+{
+ return fdtv_1394_init(fdtv_id_table);
+}
+
+static void __exit fdtv_exit(void)
+{
+ fdtv_1394_exit();
+}
+
+module_init(fdtv_init);
+module_exit(fdtv_exit);
+
+MODULE_AUTHOR("Andreas Monitzer <andy@monitzer.com>");
+MODULE_AUTHOR("Ben Backx <ben@bbackx.com>");
+MODULE_DESCRIPTION("FireDTV DVB Driver");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("FireDTV DVB");
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <dvb_frontend.h>
+
+#include "firedtv.h"
+
+static int fdtv_dvb_init(struct dvb_frontend *fe)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ int err;
+
+ /* FIXME - allocate free channel at IRM */
+ fdtv->isochannel = fdtv->adapter.num;
+
+ err = cmp_establish_pp_connection(fdtv, fdtv->subunit,
+ fdtv->isochannel);
+ if (err) {
+ dev_err(fdtv->device,
+ "could not establish point to point connection\n");
+ return err;
+ }
+
+ return fdtv->backend->start_iso(fdtv);
+}
+
+static int fdtv_sleep(struct dvb_frontend *fe)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ fdtv->backend->stop_iso(fdtv);
+ cmp_break_pp_connection(fdtv, fdtv->subunit, fdtv->isochannel);
+ fdtv->isochannel = -1;
+ return 0;
+}
+
+#define LNBCONTROL_DONTCARE 0xff
+
+static int fdtv_diseqc_send_master_cmd(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *cmd)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ return avc_lnb_control(fdtv, LNBCONTROL_DONTCARE, LNBCONTROL_DONTCARE,
+ LNBCONTROL_DONTCARE, 1, cmd);
+}
+
+static int fdtv_diseqc_send_burst(struct dvb_frontend *fe,
+ fe_sec_mini_cmd_t minicmd)
+{
+ return 0;
+}
+
+static int fdtv_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ fdtv->tone = tone;
+ return 0;
+}
+
+static int fdtv_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ fdtv->voltage = voltage;
+ return 0;
+}
+
+static int fdtv_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ struct firedtv_tuner_status stat;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ if (stat.no_rf)
+ *status = 0;
+ else
+ *status = FE_HAS_SIGNAL | FE_HAS_VITERBI | FE_HAS_SYNC |
+ FE_HAS_CARRIER | FE_HAS_LOCK;
+ return 0;
+}
+
+static int fdtv_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ struct firedtv_tuner_status stat;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ *ber = stat.ber;
+ return 0;
+}
+
+static int fdtv_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ struct firedtv_tuner_status stat;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ *strength = stat.signal_strength << 8;
+ return 0;
+}
+
+static int fdtv_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ struct firedtv_tuner_status stat;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ /* C/N[dB] = -10 * log10(snr / 65535) */
+ *snr = stat.carrier_noise_ratio * 257;
+ return 0;
+}
+
+static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ return -EOPNOTSUPP;
+}
+
+#define ACCEPTED 0x9
+
+static int fdtv_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ /* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */
+ if (avc_tuner_dsd(fdtv, params) != ACCEPTED)
+ return -EINVAL;
+ else
+ return 0; /* not sure of this... */
+}
+
+static int fdtv_get_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ return -EOPNOTSUPP;
+}
+
+void fdtv_frontend_init(struct firedtv *fdtv)
+{
+ struct dvb_frontend_ops *ops = &fdtv->fe.ops;
+ struct dvb_frontend_info *fi = &ops->info;
+
+ ops->init = fdtv_dvb_init;
+ ops->sleep = fdtv_sleep;
+
+ ops->set_frontend = fdtv_set_frontend;
+ ops->get_frontend = fdtv_get_frontend;
+
+ ops->read_status = fdtv_read_status;
+ ops->read_ber = fdtv_read_ber;
+ ops->read_signal_strength = fdtv_read_signal_strength;
+ ops->read_snr = fdtv_read_snr;
+ ops->read_ucblocks = fdtv_read_uncorrected_blocks;
+
+ ops->diseqc_send_master_cmd = fdtv_diseqc_send_master_cmd;
+ ops->diseqc_send_burst = fdtv_diseqc_send_burst;
+ ops->set_tone = fdtv_set_tone;
+ ops->set_voltage = fdtv_set_voltage;
+
+ switch (fdtv->type) {
+ case FIREDTV_DVB_S:
+ case FIREDTV_DVB_S2:
+ fi->type = FE_QPSK;
+
+ fi->frequency_min = 950000;
+ fi->frequency_max = 2150000;
+ fi->frequency_stepsize = 125;
+ fi->symbol_rate_min = 1000000;
+ fi->symbol_rate_max = 40000000;
+
+ fi->caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK;
+ break;
+
+ case FIREDTV_DVB_C:
+ fi->type = FE_QAM;
+
+ fi->frequency_min = 47000000;
+ fi->frequency_max = 866000000;
+ fi->frequency_stepsize = 62500;
+ fi->symbol_rate_min = 870000;
+ fi->symbol_rate_max = 6900000;
+
+ fi->caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256 |
+ FE_CAN_QAM_AUTO;
+ break;
+
+ case FIREDTV_DVB_T:
+ fi->type = FE_OFDM;
+
+ fi->frequency_min = 49000000;
+ fi->frequency_max = 861000000;
+ fi->frequency_stepsize = 62500;
+
+ fi->caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO;
+ break;
+
+ default:
+ dev_err(fdtv->device, "no frontend for model type %d\n",
+ fdtv->type);
+ }
+ strcpy(fi->name, fdtv_model_names[fdtv->type]);
+
+ fdtv->fe.dvb = &fdtv->adapter;
+ fdtv->fe.sec_priv = fdtv;
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include "firedtv.h"
+
+/* fixed table with older keycodes, geared towards MythTV */
+const static u16 oldtable[] = {
+
+ /* code from device: 0x4501...0x451f */
+
+ KEY_ESC,
+ KEY_F9,
+ KEY_1,
+ KEY_2,
+ KEY_3,
+ KEY_4,
+ KEY_5,
+ KEY_6,
+ KEY_7,
+ KEY_8,
+ KEY_9,
+ KEY_I,
+ KEY_0,
+ KEY_ENTER,
+ KEY_RED,
+ KEY_UP,
+ KEY_GREEN,
+ KEY_F10,
+ KEY_SPACE,
+ KEY_F11,
+ KEY_YELLOW,
+ KEY_DOWN,
+ KEY_BLUE,
+ KEY_Z,
+ KEY_P,
+ KEY_PAGEDOWN,
+ KEY_LEFT,
+ KEY_W,
+ KEY_RIGHT,
+ KEY_P,
+ KEY_M,
+
+ /* code from device: 0x4540...0x4542 */
+
+ KEY_R,
+ KEY_V,
+ KEY_C,
+};
+
+/* user-modifiable table for a remote as sold in 2008 */
+const static u16 keytable[] = {
+
+ /* code from device: 0x0300...0x031f */
+
+ [0x00] = KEY_POWER,
+ [0x01] = KEY_SLEEP,
+ [0x02] = KEY_STOP,
+ [0x03] = KEY_OK,
+ [0x04] = KEY_RIGHT,
+ [0x05] = KEY_1,
+ [0x06] = KEY_2,
+ [0x07] = KEY_3,
+ [0x08] = KEY_LEFT,
+ [0x09] = KEY_4,
+ [0x0a] = KEY_5,
+ [0x0b] = KEY_6,
+ [0x0c] = KEY_UP,
+ [0x0d] = KEY_7,
+ [0x0e] = KEY_8,
+ [0x0f] = KEY_9,
+ [0x10] = KEY_DOWN,
+ [0x11] = KEY_TITLE, /* "OSD" - fixme */
+ [0x12] = KEY_0,
+ [0x13] = KEY_F20, /* "16:9" - fixme */
+ [0x14] = KEY_SCREEN, /* "FULL" - fixme */
+ [0x15] = KEY_MUTE,
+ [0x16] = KEY_SUBTITLE,
+ [0x17] = KEY_RECORD,
+ [0x18] = KEY_TEXT,
+ [0x19] = KEY_AUDIO,
+ [0x1a] = KEY_RED,
+ [0x1b] = KEY_PREVIOUS,
+ [0x1c] = KEY_REWIND,
+ [0x1d] = KEY_PLAYPAUSE,
+ [0x1e] = KEY_NEXT,
+ [0x1f] = KEY_VOLUMEUP,
+
+ /* code from device: 0x0340...0x0354 */
+
+ [0x20] = KEY_CHANNELUP,
+ [0x21] = KEY_F21, /* "4:3" - fixme */
+ [0x22] = KEY_TV,
+ [0x23] = KEY_DVD,
+ [0x24] = KEY_VCR,
+ [0x25] = KEY_AUX,
+ [0x26] = KEY_GREEN,
+ [0x27] = KEY_YELLOW,
+ [0x28] = KEY_BLUE,
+ [0x29] = KEY_CHANNEL, /* "CH.LIST" */
+ [0x2a] = KEY_VENDOR, /* "CI" - fixme */
+ [0x2b] = KEY_VOLUMEDOWN,
+ [0x2c] = KEY_CHANNELDOWN,
+ [0x2d] = KEY_LAST,
+ [0x2e] = KEY_INFO,
+ [0x2f] = KEY_FORWARD,
+ [0x30] = KEY_LIST,
+ [0x31] = KEY_FAVORITES,
+ [0x32] = KEY_MENU,
+ [0x33] = KEY_EPG,
+ [0x34] = KEY_EXIT,
+};
+
+int fdtv_register_rc(struct firedtv *fdtv, struct device *dev)
+{
+ struct input_dev *idev;
+ int i, err;
+
+ idev = input_allocate_device();
+ if (!idev)
+ return -ENOMEM;
+
+ fdtv->remote_ctrl_dev = idev;
+ idev->name = "FireDTV remote control";
+ idev->dev.parent = dev;
+ idev->evbit[0] = BIT_MASK(EV_KEY);
+ idev->keycode = kmemdup(keytable, sizeof(keytable), GFP_KERNEL);
+ if (!idev->keycode) {
+ err = -ENOMEM;
+ goto fail;
+ }
+ idev->keycodesize = sizeof(keytable[0]);
+ idev->keycodemax = ARRAY_SIZE(keytable);
+
+ for (i = 0; i < ARRAY_SIZE(keytable); i++)
+ set_bit(keytable[i], idev->keybit);
+
+ err = input_register_device(idev);
+ if (err)
+ goto fail_free_keymap;
+
+ return 0;
+
+fail_free_keymap:
+ kfree(idev->keycode);
+fail:
+ input_free_device(idev);
+ return err;
+}
+
+void fdtv_unregister_rc(struct firedtv *fdtv)
+{
+ kfree(fdtv->remote_ctrl_dev->keycode);
+ input_unregister_device(fdtv->remote_ctrl_dev);
+}
+
+void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code)
+{
+ u16 *keycode = fdtv->remote_ctrl_dev->keycode;
+
+ if (code >= 0x0300 && code <= 0x031f)
+ code = keycode[code - 0x0300];
+ else if (code >= 0x0340 && code <= 0x0354)
+ code = keycode[code - 0x0320];
+ else if (code >= 0x4501 && code <= 0x451f)
+ code = oldtable[code - 0x4501];
+ else if (code >= 0x4540 && code <= 0x4542)
+ code = oldtable[code - 0x4521];
+ else {
+ printk(KERN_DEBUG "firedtv: invalid key code 0x%04x "
+ "from remote control\n", code);
+ return;
+ }
+
+ input_report_key(fdtv->remote_ctrl_dev, code, 1);
+ input_report_key(fdtv->remote_ctrl_dev, code, 0);
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _FIREDTV_H
+#define _FIREDTV_H
+
+#include <linux/dvb/dmx.h>
+#include <linux/dvb/frontend.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <demux.h>
+#include <dmxdev.h>
+#include <dvb_demux.h>
+#include <dvb_frontend.h>
+#include <dvb_net.h>
+#include <dvbdev.h>
+
+struct firedtv_tuner_status {
+ unsigned active_system:8;
+ unsigned searching:1;
+ unsigned moving:1;
+ unsigned no_rf:1;
+ unsigned input:1;
+ unsigned selected_antenna:7;
+ unsigned ber:32;
+ unsigned signal_strength:8;
+ unsigned raster_frequency:2;
+ unsigned rf_frequency:22;
+ unsigned man_dep_info_length:8;
+ unsigned front_end_error:1;
+ unsigned antenna_error:1;
+ unsigned front_end_power_status:1;
+ unsigned power_supply:1;
+ unsigned carrier_noise_ratio:16;
+ unsigned power_supply_voltage:8;
+ unsigned antenna_voltage:8;
+ unsigned firewire_bus_voltage:8;
+ unsigned ca_mmi:1;
+ unsigned ca_pmt_reply:1;
+ unsigned ca_date_time_request:1;
+ unsigned ca_application_info:1;
+ unsigned ca_module_present_status:1;
+ unsigned ca_dvb_flag:1;
+ unsigned ca_error_flag:1;
+ unsigned ca_initialization_status:1;
+};
+
+enum model_type {
+ FIREDTV_UNKNOWN = 0,
+ FIREDTV_DVB_S = 1,
+ FIREDTV_DVB_C = 2,
+ FIREDTV_DVB_T = 3,
+ FIREDTV_DVB_S2 = 4,
+};
+
+struct device;
+struct input_dev;
+struct firedtv;
+
+struct firedtv_backend {
+ int (*lock)(struct firedtv *fdtv, u64 addr, void *data, __be32 arg);
+ int (*read)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
+ int (*write)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
+ int (*start_iso)(struct firedtv *fdtv);
+ void (*stop_iso)(struct firedtv *fdtv);
+};
+
+struct firedtv {
+ struct device *device;
+ struct list_head list;
+
+ struct dvb_adapter adapter;
+ struct dmxdev dmxdev;
+ struct dvb_demux demux;
+ struct dmx_frontend frontend;
+ struct dvb_net dvbnet;
+ struct dvb_frontend fe;
+
+ struct dvb_device *cadev;
+ int ca_last_command;
+ int ca_time_interval;
+
+ struct mutex avc_mutex;
+ wait_queue_head_t avc_wait;
+ bool avc_reply_received;
+ struct work_struct remote_ctrl_work;
+ struct input_dev *remote_ctrl_dev;
+
+ enum model_type type;
+ char subunit;
+ char isochannel;
+ fe_sec_voltage_t voltage;
+ fe_sec_tone_mode_t tone;
+
+ const struct firedtv_backend *backend;
+ void *backend_data;
+
+ struct mutex demux_mutex;
+ unsigned long channel_active;
+ u16 channel_pid[16];
+
+ size_t response_length;
+ u8 response[512];
+};
+
+/* firedtv-1394.c */
+#ifdef CONFIG_DVB_FIREDTV_IEEE1394
+int fdtv_1394_init(struct ieee1394_device_id id_table[]);
+void fdtv_1394_exit(void);
+#else
+static inline int fdtv_1394_init(struct ieee1394_device_id it[]) { return 0; }
+static inline void fdtv_1394_exit(void) {}
+#endif
+
+/* firedtv-avc.c */
+int avc_recv(struct firedtv *fdtv, void *data, size_t length);
+int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat);
+struct dvb_frontend_parameters;
+int avc_tuner_dsd(struct firedtv *fdtv, struct dvb_frontend_parameters *params);
+int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[]);
+int avc_tuner_get_ts(struct firedtv *fdtv);
+int avc_identify_subunit(struct firedtv *fdtv);
+struct dvb_diseqc_master_cmd;
+int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
+ char conttone, char nrdiseq,
+ struct dvb_diseqc_master_cmd *diseqcmd);
+void avc_remote_ctrl_work(struct work_struct *work);
+int avc_register_remote_control(struct firedtv *fdtv);
+int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
+int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
+int avc_ca_reset(struct firedtv *fdtv);
+int avc_ca_pmt(struct firedtv *fdtv, char *app_info, int length);
+int avc_ca_get_time_date(struct firedtv *fdtv, int *interval);
+int avc_ca_enter_menu(struct firedtv *fdtv);
+int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len);
+int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel);
+void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel);
+
+/* firedtv-ci.c */
+int fdtv_ca_register(struct firedtv *fdtv);
+void fdtv_ca_release(struct firedtv *fdtv);
+
+/* firedtv-dvb.c */
+int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed);
+int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed);
+int fdtv_dvb_register(struct firedtv *fdtv);
+void fdtv_dvb_unregister(struct firedtv *fdtv);
+struct firedtv *fdtv_alloc(struct device *dev,
+ const struct firedtv_backend *backend,
+ const char *name, size_t name_len);
+extern const char *fdtv_model_names[];
+
+/* firedtv-fe.c */
+void fdtv_frontend_init(struct firedtv *fdtv);
+
+/* firedtv-rc.c */
+#ifdef CONFIG_DVB_FIREDTV_INPUT
+int fdtv_register_rc(struct firedtv *fdtv, struct device *dev);
+void fdtv_unregister_rc(struct firedtv *fdtv);
+void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code);
+#else
+static inline int fdtv_register_rc(struct firedtv *fdtv,
+ struct device *dev) { return 0; }
+static inline void fdtv_unregister_rc(struct firedtv *fdtv) {}
+static inline void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) {}
+#endif
+
+#endif /* _FIREDTV_H */
pcm->info_flags = 0;
pcm->private_data = dev;
strcpy(pcm->name, "Empia 28xx Capture");
+
+ snd_card_set_dev(card, &dev->udev->dev);
strcpy(card->driver, "Empia Em28xx Audio");
strcpy(card->shortname, "Em28xx Audio");
strcpy(card->longname, "Empia Em28xx Audio");
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
- const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL;
- const struct soc_camera_format_xlate *xlate;
+ const struct soc_camera_data_format *cam_fmt = NULL;
+ const struct soc_camera_format_xlate *xlate = NULL;
struct soc_camera_sense sense = {
.master_clock = pcdev->mclk,
.pixel_clock_max = pcdev->ciclk / 4,
};
- int ret, buswidth;
+ int ret;
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (!xlate) {
- dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
+ if (pixfmt) {
+ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+ if (!xlate) {
+ dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+ return -EINVAL;
+ }
- buswidth = xlate->buswidth;
- host_fmt = xlate->host_fmt;
- cam_fmt = xlate->cam_fmt;
+ cam_fmt = xlate->cam_fmt;
+ }
/* If PCLK is used to latch data from the sensor, check sense */
if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
}
if (pixfmt && !ret) {
- icd->buswidth = buswidth;
- icd->current_fmt = host_fmt;
+ icd->buswidth = xlate->buswidth;
+ icd->current_fmt = xlate->host_fmt;
}
return ret;
const struct soc_camera_format_xlate *xlate;
int ret;
+ if (!pixfmt)
+ return icd->ops->set_fmt(icd, pixfmt, rect);
+
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
if (!xlate) {
dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
return -EINVAL;
}
- switch (pixfmt) {
- case 0: /* Only geometry change */
- ret = icd->ops->set_fmt(icd, pixfmt, rect);
- break;
- default:
- ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
- }
+ ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
- if (pixfmt && !ret) {
+ if (!ret) {
icd->buswidth = xlate->buswidth;
icd->current_fmt = xlate->host_fmt;
pcdev->camera_fmt = xlate->cam_fmt;
usb_to_input_id(udev, &input->id);
input->dev.parent = &dev->intf->dev;
- set_bit(EV_KEY, input->evbit);
- set_bit(BTN_0, input->keybit);
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(KEY_CAMERA, input->keybit);
if ((ret = input_register_device(input)) < 0)
goto error;
static void uvc_input_report_key(struct uvc_device *dev, unsigned int code,
int value)
{
- if (dev->input)
+ if (dev->input) {
input_report_key(dev->input, code, value);
+ input_sync(dev->input);
+ }
}
#else
return;
uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n",
data[1], data[3] ? "pressed" : "released", len);
- uvc_input_report_key(dev, BTN_0, data[3]);
+ uvc_input_report_key(dev, KEY_CAMERA, data[3]);
} else {
uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
"len %d.\n", data[1], data[2], data[3], len);
controllers (default=0)");
static int mpt_msi_enable_sas;
-module_param(mpt_msi_enable_sas, int, 1);
+module_param(mpt_msi_enable_sas, int, 0);
MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
- controllers (default=1)");
+ controllers (default=0)");
static int mpt_channel_mapping;
wm8350->power.rev_g_coeff = 1;
break;
+ case 1:
+ dev_info(wm8350->dev, "WM8351 Rev B\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+
default:
dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
ret = -ENODEV;
static struct pci_device_id ilo_devices[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) },
+ { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3307) },
{ }
};
MODULE_DEVICE_TABLE(pci, ilo_devices);
class_destroy(ilo_class);
}
-MODULE_VERSION("0.06");
+MODULE_VERSION("1.0");
MODULE_ALIAS(ILO_NAME);
MODULE_DESCRIPTION(ILO_NAME);
MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
sg_init_one(&sg, data_buf, len);
- /*
- * The spec states that CSR and CID accesses have a timeout
- * of 64 clock cycles.
- */
- data.timeout_ns = 0;
- data.timeout_clks = 64;
+ if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
+ /*
+ * The spec states that CSR and CID accesses have a timeout
+ * of 64 clock cycles.
+ */
+ data.timeout_ns = 0;
+ data.timeout_clks = 64;
+ } else
+ mmc_set_data_timeout(&data, card);
mmc_wait_for_req(host, &mrq);
host->mem->start + host->sdidata);
if (!setup_ok) {
- s3c2410_dma_config(host->dma, 4,
- (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
+ s3c2410_dma_config(host->dma, 4, 0);
s3c2410_dma_set_buffdone_fn(host->dma,
s3cmci_dma_done_callback);
s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
static const struct sdhci_pci_fixes sdhci_cafe = {
.quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_NO_BUSY_IRQ |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
};
if (host->cmd->data)
DBG("Cannot wait for busy signal when also "
"doing a data transfer");
- else
+ else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
return;
+
+ /* The controller does not support the end-of-busy IRQ,
+ * fall through and take the SDHCI_INT_RESPONSE */
}
if (intmask & SDHCI_INT_RESPONSE)
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static void maprom_nop (struct mtd_info *);
static struct mtd_info *map_rom_probe(struct map_info *map);
+static int maprom_erase (struct mtd_info *mtd, struct erase_info *info);
static struct mtd_chip_driver maprom_chipdrv = {
.probe = map_rom_probe,
mtd->read = maprom_read;
mtd->write = maprom_write;
mtd->sync = maprom_nop;
+ mtd->erase = maprom_erase;
mtd->flags = MTD_CAP_ROM;
mtd->erasesize = map->size;
mtd->writesize = 1;
return -EIO;
}
+static int maprom_erase (struct mtd_info *mtd, struct erase_info *info)
+{
+ /* We do our best 8) */
+ return -EROFS;
+}
+
static int __init map_rom_init(void)
{
register_mtd_chip_driver(&maprom_chipdrv);
if (!(info->flags & IS_POW2PS))
return info;
}
- }
+ } else
+ return info;
}
}
if (*(szlength) != '+') {
devlength = simple_strtoul(szlength, &buffer, 0);
devlength = handle_unit(devlength, buffer) - devstart;
+ if (devlength < devstart)
+ goto err_out;
+
+ devlength -= devstart;
} else {
devlength = simple_strtoul(szlength + 1, &buffer, 0);
devlength = handle_unit(devlength, buffer);
}
T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
devname, devstart, devlength);
- if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) {
- E("slram: Illegal start / length parameter.\n");
- return(-EINVAL);
- }
+ if (devlength % SLRAM_BLK_SZ != 0)
+ goto err_out;
if ((devstart = register_device(devname, devstart, devlength))){
unregister_devices();
return((int)devstart);
}
return(0);
+
+err_out:
+ E("slram: Illegal length parameter.\n");
+ return(-EINVAL);
}
#ifndef MODULE
DDR memories, intended for battery-operated systems.
config MTD_QINFO_PROBE
+ depends on MTD_LPDDR
tristate "Detect flash chips by QINFO probe"
help
Device Information for LPDDR chips is offered through the Overlay
config MTD_BFIN_ASYNC
tristate "Blackfin BF533-STAMP Flash Chip Support"
- depends on BFIN533_STAMP && MTD_CFI
+ depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS
select MTD_PARTITIONS
default y
help
if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+ kfree(state);
return -EBUSY;
}
gpio_direction_output(state->enet_flash_pin, 1);
pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
state->mtd = do_map_probe(memory->name, &state->map);
- if (!state->mtd)
+ if (!state->mtd) {
+ gpio_free(state->enet_flash_pin);
+ kfree(state);
return -ENXIO;
+ }
#ifdef CONFIG_MTD_PARTITIONS
ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
{ 0, }
};
+#if 0
MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl);
-#if 0
static struct pci_driver ck804xrom_driver = {
.name = MOD_NAME,
.id_table = ck804xrom_pci_tbl,
struct map_info map[MAX_RESOURCES];
#ifdef CONFIG_MTD_PARTITIONS
int nr_parts;
+ struct mtd_partition *parts;
#endif
};
physmap_data = dev->dev.platform_data;
-#ifdef CONFIG_MTD_CONCAT
- if (info->cmtd != info->mtd[0]) {
+ if (info->cmtd) {
+#ifdef CONFIG_MTD_PARTITIONS
+ if (info->nr_parts || physmap_data->nr_parts)
+ del_mtd_partitions(info->cmtd);
+ else
+ del_mtd_device(info->cmtd);
+#else
del_mtd_device(info->cmtd);
- mtd_concat_destroy(info->cmtd);
+#endif
}
+#ifdef CONFIG_MTD_PARTITIONS
+ if (info->nr_parts)
+ kfree(info->parts);
#endif
- for (i = 0; i < MAX_RESOURCES; i++) {
- if (info->mtd[i] != NULL) {
-#ifdef CONFIG_MTD_PARTITIONS
- if (info->nr_parts || physmap_data->nr_parts)
- del_mtd_partitions(info->mtd[i]);
- else
- del_mtd_device(info->mtd[i]);
-#else
- del_mtd_device(info->mtd[i]);
+#ifdef CONFIG_MTD_CONCAT
+ if (info->cmtd != info->mtd[0])
+ mtd_concat_destroy(info->cmtd);
#endif
+
+ for (i = 0; i < MAX_RESOURCES; i++) {
+ if (info->mtd[i] != NULL)
map_destroy(info->mtd[i]);
- }
}
return 0;
}
int err = 0;
int i;
int devices_found = 0;
-#ifdef CONFIG_MTD_PARTITIONS
- struct mtd_partition *parts;
-#endif
physmap_data = dev->dev.platform_data;
if (physmap_data == NULL)
goto err_out;
#ifdef CONFIG_MTD_PARTITIONS
- err = parse_mtd_partitions(info->cmtd, part_probe_types, &parts, 0);
+ err = parse_mtd_partitions(info->cmtd, part_probe_types,
+ &info->parts, 0);
if (err > 0) {
- add_mtd_partitions(info->cmtd, parts, err);
- kfree(parts);
+ add_mtd_partitions(info->cmtd, info->parts, err);
+ info->nr_parts = err;
return 0;
}
static struct platform_driver orion_nand_driver = {
.probe = orion_nand_probe,
- .remove = orion_nand_remove,
+ .remove = __devexit_p(orion_nand_remove),
.driver = {
.name = "orion_nand",
.owner = THIS_MODULE,
#
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
-obj-$(CONFIG_ARM_ETHERH) += etherh.o ../8390.o
+obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
.ndo_open = etherh_open,
.ndo_stop = etherh_close,
.ndo_set_config = etherh_set_config,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_multicast_list = __ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
msleep(1);
}
- if (reset_timeout == 0) {
+ if (reset_timeout < 0) {
dev_crit(ksp->dev,
"Timeout waiting for DMA engines to reset\n");
/* And blithely carry on */
static void b44_chip_reset(struct b44 *bp, int reset_kind)
{
struct ssb_device *sdev = bp->sdev;
+ bool was_enabled;
- if (ssb_device_is_enabled(bp->sdev)) {
+ was_enabled = ssb_device_is_enabled(bp->sdev);
+
+ ssb_device_enable(bp->sdev, 0);
+ ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+
+ if (was_enabled) {
bw32(bp, B44_RCV_LAZY, 0);
bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1);
}
bw32(bp, B44_DMARX_CTRL, 0);
bp->rx_prod = bp->rx_cons = 0;
- } else
- ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+ }
- ssb_device_enable(bp->sdev, 0);
b44_clear_stats(bp);
/*
struct net_device *dev = ssb_get_drvdata(sdev);
unregister_netdev(dev);
+ ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
ssb_pcihost_set_power_state(sdev, PCI_D3hot);
const struct net_device_ops *slave_ops
= slave->dev->netdev_ops;
if (slave_ops->ndo_neigh_setup)
- return slave_ops->ndo_neigh_setup(dev, parms);
+ return slave_ops->ndo_neigh_setup(slave->dev, parms);
}
return 0;
}
spin_lock_irqsave(&priv->txlock, flags);
/* check if there is space to queue this packet */
- if (nr_frags > priv->num_txbdfree) {
+ if ((nr_frags+1) > priv->num_txbdfree) {
/* no space, stop the queue */
netif_stop_queue(dev);
dev->stats.tx_fifo_errors++;
if (this_dev != 0) break; /* only autoprobe 1st one */
printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
}
- dev = alloc_ei_netdev();
+ dev = alloc_eip_netdev();
if (!dev)
break;
dev->irq = irq[this_dev];
goto out_inc;
i = atomic_read(&rxring->next_to_clean);
- while (limit-- > 0) {
+ while (limit > 0) {
rxdesc = rxring->desc;
rxdesc += i;
if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
goto out;
+ --limit;
desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
- mem_ptr0 = ioremap(mem_base, mem_len);
+ mem_ptr0 = pci_ioremap_bar(pdev, 0);
+ if (mem_ptr0 == NULL) {
+ dev_err(&pdev->dev, "failed to map PCI bar 0\n");
+ return -EIO;
+ }
+
pci_len0 = mem_len;
first_page_group_start = 0;
first_page_group_end = 0;
* See if the firmware gave us a virtual-physical port mapping.
*/
adapter->physical_port = adapter->portnum;
- i = adapter->pci_read_normalize(adapter, CRB_V2P(adapter->portnum));
- if (i != 0x55555555)
- adapter->physical_port = i;
+ if (adapter->fw_major < 4) {
+ i = adapter->pci_read_normalize(adapter,
+ CRB_V2P(adapter->portnum));
+ if (i != 0x55555555)
+ adapter->physical_port = i;
+ }
adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
- (--worklimit >= 0)) {
+ worklimit > 0) {
+ worklimit--;
if (rx_status & 0x4000) { /* Error, update stats. */
short error = rx_status & 0x3800;
dev->stats.rx_errors++;
DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
- (--worklimit >= 0)) {
+ worklimit > 0) {
+ worklimit--;
if (rx_status & 0x4000) { /* Error, update stats. */
short error = rx_status & 0x3800;
dev->stats.rx_errors++;
#define RTL8169_TX_TIMEOUT (6*HZ)
#define RTL8169_PHY_TIMEOUT (10*HZ)
-#define RTL_EEPROM_SIG cpu_to_le32(0x8129)
-#define RTL_EEPROM_SIG_MASK cpu_to_le32(0xffff)
+#define RTL_EEPROM_SIG 0x8129
#define RTL_EEPROM_SIG_ADDR 0x0000
+#define RTL_EEPROM_MAC_ADDR 0x0007
/* write/read MMIO register */
#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
/* Cfg9346Bits */
Cfg9346_Lock = 0x00,
Cfg9346_Unlock = 0xc0,
+ Cfg9346_Program = 0x80, /* Programming mode */
+ Cfg9346_EECS = 0x08, /* Chip select */
+ Cfg9346_EESK = 0x04, /* Serial data clock */
+ Cfg9346_EEDI = 0x02, /* Data input */
+ Cfg9346_EEDO = 0x01, /* Data output */
/* rx_mode_bits */
AcceptErr = 0x20,
/* RxConfigBits */
RxCfgFIFOShift = 13,
RxCfgDMAShift = 8,
+ RxCfg9356SEL = 6, /* EEPROM type: 0 = 9346, 1 = 9356 */
/* TxConfigBits */
TxInterFrameGapShift = 24,
};
+/* Delay between EEPROM clock transitions. Force out buffered PCI writes. */
+#define RTL_EEPROM_DELAY() RTL_R8(Cfg9346)
+#define RTL_EEPROM_READ_CMD 6
+
+/* read 16bit word stored in EEPROM. EEPROM is addressed by words. */
+static u16 rtl_eeprom_read(void __iomem *ioaddr, int addr)
+{
+ u16 result = 0;
+ int cmd, cmd_len, i;
+
+ /* check for EEPROM address size (in bits) */
+ if (RTL_R32(RxConfig) & (1 << RxCfg9356SEL)) {
+ /* EEPROM is 93C56 */
+ cmd_len = 3 + 8; /* 3 bits for command id and 8 for address */
+ cmd = (RTL_EEPROM_READ_CMD << 8) | (addr & 0xff);
+ } else {
+ /* EEPROM is 93C46 */
+ cmd_len = 3 + 6; /* 3 bits for command id and 6 for address */
+ cmd = (RTL_EEPROM_READ_CMD << 6) | (addr & 0x3f);
+ }
+
+ /* enter programming mode */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+
+ /* write command and requested address */
+ while (cmd_len--) {
+ u8 x = Cfg9346_Program | Cfg9346_EECS;
+
+ x |= (cmd & (1 << cmd_len)) ? Cfg9346_EEDI : 0;
+
+ /* write a bit */
+ RTL_W8(Cfg9346, x);
+ RTL_EEPROM_DELAY();
+
+ /* raise clock */
+ RTL_W8(Cfg9346, x | Cfg9346_EESK);
+ RTL_EEPROM_DELAY();
+ }
+
+ /* lower clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+
+ /* read back 16bit value */
+ for (i = 16; i > 0; i--) {
+ /* raise clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS | Cfg9346_EESK);
+ RTL_EEPROM_DELAY();
+
+ result <<= 1;
+ result |= (RTL_R8(Cfg9346) & Cfg9346_EEDO) ? 1 : 0;
+
+ /* lower clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Program);
+ /* leave programming mode */
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ return result;
+}
+
+static void rtl_init_mac_address(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+ u16 x;
+ u8 mac[8];
+
+ /* read EEPROM signature */
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_SIG_ADDR);
+
+ if (x != RTL_EEPROM_SIG) {
+ dev_info(&pdev->dev, "Missing EEPROM signature: %04x\n", x);
+ return;
+ }
+
+ /* read MAC address */
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR);
+ mac[0] = x & 0xff;
+ mac[1] = x >> 8;
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 1);
+ mac[2] = x & 0xff;
+ mac[3] = x >> 8;
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 2);
+ mac[4] = x & 0xff;
+ mac[5] = x >> 8;
+
+ if (netif_msg_probe(tp)) {
+ DECLARE_MAC_BUF(buf);
+
+ dev_info(&pdev->dev, "MAC address found in EEPROM: %s\n",
+ print_mac(buf, mac));
+ }
+
+ if (is_valid_ether_addr(mac))
+ rtl_rar_set(tp, mac);
+}
+
static int __devinit
rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
tp->mmio_addr = ioaddr;
+ rtl_init_mac_address(tp, ioaddr);
+
/* Get MAC address */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+#elif defined(CONFIG_ARCH_OMAP34XX)
+ #define SMC_USE_16BIT 0
+ #define SMC_USE_32BIT 1
+ #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+ #define SMC_MEM_RESERVED 1
+#elif defined(CONFIG_ARCH_OMAP24XX)
+ #define SMC_USE_16BIT 0
+ #define SMC_USE_32BIT 1
+ #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+ #define SMC_MEM_RESERVED 1
#else
/*
* Default configuration
#define CHIP_9116 0x0116
#define CHIP_9117 0x0117
#define CHIP_9118 0x0118
+#define CHIP_9211 0x9211
#define CHIP_9215 0x115A
#define CHIP_9217 0x117A
#define CHIP_9218 0x118A
{ CHIP_9116, "LAN9116" },
{ CHIP_9117, "LAN9117" },
{ CHIP_9118, "LAN9118" },
+ { CHIP_9211, "LAN9211" },
{ CHIP_9215, "LAN9215" },
{ CHIP_9217, "LAN9217" },
{ CHIP_9218, "LAN9218" },
break;
} while (val & (GREG_SWRST_TXRST | GREG_SWRST_RXRST));
- if (limit <= 0)
+ if (limit < 0)
printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
int err = -ENODEV;
sbus_dp = to_of_device(op->dev.parent)->node;
- if (is_qfe)
- sbus_dp = to_of_device(op->dev.parent->parent)->node;
/* We can match PCI devices too, do not accept those here. */
if (strcmp(sbus_dp->name, "sbus"))
{
u32 reg;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
return;
reg = MII_TG3_MISC_SHDW_WREN |
goto err_out_trdev;
}
- ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (ret)
- goto err_out_region;
-
dev->base_addr = pci_ioaddr;
dev->irq = pci_irq_line;
dev->dma = 0;
ret = tmsdev_init(dev, &pdev->dev);
if (ret) {
printk("%s: unable to get memory for dev->priv.\n", dev->name);
- goto err_out_irq;
+ goto err_out_region;
}
tp = netdev_priv(dev);
tp->tmspriv = cardinfo;
+ ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (ret)
+ goto err_out_tmsdev;
+
dev->open = tms380tr_open;
dev->stop = tms380tr_close;
pci_set_drvdata(pdev, dev);
ret = register_netdev(dev);
if (ret)
- goto err_out_tmsdev;
+ goto err_out_irq;
return 0;
+err_out_irq:
+ free_irq(pdev->irq, dev);
err_out_tmsdev:
pci_set_drvdata(pdev, NULL);
tmsdev_term(dev);
-err_out_irq:
- free_irq(pdev->irq, dev);
err_out_region:
release_region(pci_ioaddr, TMS_PCI_IO_EXTENT);
err_out_trdev:
static int uec_mdio_reset(struct mii_bus *bus)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
- unsigned int timeout = PHY_INIT_TIMEOUT;
+ int timeout = PHY_INIT_TIMEOUT;
mutex_lock(&bus->mdio_lock);
mutex_unlock(&bus->mdio_lock);
- if (timeout <= 0) {
+ if (timeout < 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
return -EBUSY;
}
// Cables-to-Go USB Ethernet Adapter
USB_DEVICE(0x0b95, 0x772a),
.driver_info = (unsigned long) &ax88772_info,
+}, {
+ // ABOCOM for pci
+ USB_DEVICE(0x14ea, 0xab11),
+ .driver_info = (unsigned long) &ax88178_info,
+}, {
+ // ASIX 88772a
+ USB_DEVICE(0x0db0, 0xa877),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3507g */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
},
{ }, // END
};
},
{
USB_DEVICE(0x0a47, 0x9601), /* Hirose USB-100 */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
+ {
+ USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */
.driver_info = (unsigned long)&dm9601_info,
},
{}, // END
if (dev->mii.mdio_read)
return mii_link_ok(&dev->mii);
- /* Otherwise, say we're up (to avoid breaking scripts) */
- return 1;
+ /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
+ return ethtool_op_get_link(net);
}
EXPORT_SYMBOL_GPL(usbnet_get_link);
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+ /* Motorola MOTOMAGX phones */
+ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
},
/* Olympus has some models with a Zaurus-compatible option.
return 0;
}
+static int veth_close(struct net_device *dev)
+{
+ struct veth_priv *priv = netdev_priv(dev);
+
+ netif_carrier_off(dev);
+ netif_carrier_off(priv->peer);
+
+ return 0;
+}
+
static int veth_dev_init(struct net_device *dev)
{
struct veth_net_stats *stats;
static const struct net_device_ops veth_netdev_ops = {
.ndo_init = veth_dev_init,
.ndo_open = veth_open,
+ .ndo_stop = veth_close,
.ndo_start_xmit = veth_xmit,
.ndo_get_stats = veth_get_stats,
.ndo_set_mac_address = eth_mac_addr,
dev->destructor = veth_dev_free;
}
-static void veth_change_state(struct net_device *dev)
-{
- struct net_device *peer;
- struct veth_priv *priv;
-
- priv = netdev_priv(dev);
- peer = priv->peer;
-
- if (netif_carrier_ok(peer)) {
- if (!netif_carrier_ok(dev))
- netif_carrier_on(dev);
- } else {
- if (netif_carrier_ok(dev))
- netif_carrier_off(dev);
- }
-}
-
-static int veth_device_event(struct notifier_block *unused,
- unsigned long event, void *ptr)
-{
- struct net_device *dev = ptr;
-
- if (dev->netdev_ops->ndo_open != veth_open)
- goto out;
-
- switch (event) {
- case NETDEV_CHANGE:
- veth_change_state(dev);
- break;
- }
-out:
- return NOTIFY_DONE;
-}
-
-static struct notifier_block veth_notifier_block __read_mostly = {
- .notifier_call = veth_device_event,
-};
-
/*
* netlink interface
*/
static __init int veth_init(void)
{
- register_netdevice_notifier(&veth_notifier_block);
return rtnl_link_register(&veth_link_ops);
}
static __exit void veth_exit(void)
{
rtnl_link_unregister(&veth_link_ops);
- unregister_netdevice_notifier(&veth_notifier_block);
}
module_init(veth_init);
bad:
if (ah)
ath9k_hw_detach(ah);
+ ath9k_exit_debug(sc);
return error;
}
static int ath_attach(u16 devid, struct ath_softc *sc)
{
struct ieee80211_hw *hw = sc->hw;
- int error = 0;
+ int error = 0, i;
DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
/* initialize tx/rx engine */
error = ath_tx_init(sc, ATH_TXBUF);
if (error != 0)
- goto detach;
+ goto error_attach;
error = ath_rx_init(sc, ATH_RXBUF);
if (error != 0)
- goto detach;
+ goto error_attach;
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
/* Initialze h/w Rfkill */
INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
/* Initialize s/w rfkill */
- if (ath_init_sw_rfkill(sc))
- goto detach;
+ error = ath_init_sw_rfkill(sc);
+ if (error)
+ goto error_attach;
#endif
error = ieee80211_register_hw(hw);
ath_init_leds(sc);
return 0;
-detach:
- ath_detach(sc);
+
+error_attach:
+ /* cleanup tx queues */
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+ if (ATH_TXQ_SETUP(sc, i))
+ ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+ ath9k_hw_detach(sc->sc_ah);
+ ath9k_exit_debug(sc);
+
return error;
}
}
err = iwl_eeprom_check_version(priv);
if (err)
- goto out_iounmap;
+ goto out_free_eeprom;
/* extract MAC Address */
iwl_eeprom_get_mac(priv, priv->mac_addr);
return 0;
out_remove_sysfs:
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
out_uninit_drv:
iwl_uninit_drv(priv);
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
- pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
+ pci_release_regions(pdev);
out_pci_disable_device:
pci_disable_device(pdev);
out_ieee80211_free_hw:
pci_unmap_single(dev,
pci_unmap_addr(&txq->cmd[index]->meta, mapping),
pci_unmap_len(&txq->cmd[index]->meta, len),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
/* Unmap chunks, if any. */
for (i = 1; i < num_tbs; i++) {
* within command buffer array. */
txcmd_phys = pci_map_single(priv->pci_dev,
out_cmd, sizeof(struct iwl_cmd),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
/* Add buffer containing Tx command and MAC(!) header to TFD's
IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
phys_addr = pci_map_single(priv->pci_dev, out_cmd,
- len, PCI_DMA_TODEVICE);
+ len, PCI_DMA_BIDIRECTIONAL);
pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
pci_unmap_len_set(&out_cmd->meta, len, len);
phys_addr += offsetof(struct iwl_cmd, hdr);
pci_unmap_single(priv->pci_dev,
pci_unmap_addr(&txq->cmd[cmd_idx]->meta, mapping),
pci_unmap_len(&txq->cmd[cmd_idx]->meta, len),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
if (err < 0) {
IWL_DEBUG_INFO("Failed to init the card\n");
- goto out_remove_sysfs;
+ goto out_iounmap;
}
/***********************
err = iwl3945_eeprom_init(priv);
if (err) {
IWL_ERROR("Unable to init EEPROM\n");
- goto out_remove_sysfs;
+ goto out_iounmap;
}
/* MAC Address location in EEPROM same for 3945/4965 */
get_eeprom_mac(priv, priv->mac_addr);
err = iwl3945_init_channel_map(priv);
if (err) {
IWL_ERROR("initializing regulatory failed: %d\n", err);
- goto out_release_irq;
+ goto out_unset_hw_setting;
}
err = iwl3945_init_geos(priv);
return 0;
out_remove_sysfs:
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
out_free_geos:
iwl3945_free_geos(priv);
out_free_channel_map:
iwl3945_free_channel_map(priv);
-
-
- out_release_irq:
- destroy_workqueue(priv->workqueue);
- priv->workqueue = NULL;
+ out_unset_hw_setting:
iwl3945_unset_hw_setting(priv);
-
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
pci_release_regions(pdev);
out_pci_disable_device:
- pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
out_ieee80211_free_hw:
ieee80211_free_hw(priv->hw);
out:
static void lbs_ethtool_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
snprintf(info->fw_version, 32, "%u.%u.%u.p%u",
priv->fwrelease >> 24 & 0xff,
static int lbs_ethtool_get_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 * bytes)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct cmd_ds_802_11_eeprom_access cmd;
int ret;
static void lbs_ethtool_get_stats(struct net_device *dev,
struct ethtool_stats *stats, uint64_t *data)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
return MESH_STATS_NUM;
static void lbs_ethtool_get_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
if (priv->wol_criteria == 0xffffffff) {
/* Interface driver didn't configure wake */
static int lbs_ethtool_set_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
uint32_t criteria = 0;
if (priv->wol_criteria == 0xffffffff && wol->wolopts)
static ssize_t if_usb_firmware_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
char fwname[FIRMWARE_NAME_MAX];
int ret;
static ssize_t if_usb_boot2_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
char fwname[FIRMWARE_NAME_MAX];
int ret;
static ssize_t lbs_anycast_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
static ssize_t lbs_anycast_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
uint32_t datum;
int ret;
static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
u32 retry_limit;
static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
unsigned long retry_limit;
static ssize_t lbs_rtap_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
return snprintf(buf, 5, "0x%X\n", priv->monitormode);
}
struct device_attribute *attr, const char * buf, size_t count)
{
int monitor_mode;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
sscanf(buf, "%x", &monitor_mode);
if (monitor_mode) {
static ssize_t lbs_mesh_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
}
static ssize_t lbs_mesh_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
int enable;
int ret, action = CMD_ACT_MESH_CONFIG_STOP;
*/
static int lbs_dev_open(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev) ;
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_NET);
*/
static int lbs_eth_stop(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_NET);
static void lbs_tx_timeout(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_TX);
*/
static struct net_device_stats *lbs_get_stats(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_NET);
return &priv->stats;
static int lbs_set_mac_address(struct net_device *dev, void *addr)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct sockaddr *phwaddr = addr;
struct cmd_ds_802_11_mac_address cmd;
static void lbs_set_multicast_list(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
schedule_work(&priv->mcast_work);
}
static int lbs_thread(void *data)
{
struct net_device *dev = data;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
wait_queue_t wait;
lbs_deb_enter(LBS_DEB_THREAD);
goto done;
}
priv = netdev_priv(dev);
+ dev->ml_priv = priv;
if (lbs_init_adapter(priv)) {
lbs_pr_err("failed to initialize adapter structure.\n");
static int mesh_get_default_parameters(struct device *dev,
struct mrvl_mesh_defaults *defs)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
int ret;
static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
static ssize_t boottime_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
int len;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
union iwreq_data *wrqu, char *extra)
{
DECLARE_SSID_BUF(ssid);
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_point *dwrq, char *extra)
{
#define SCAN_ITEM_SIZE 128
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int err = 0;
char *ev = extra;
char *stop = ev + dwrq->length;
int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct txpd *txpd;
char *p802x_hdr;
uint16_t pkt_len;
static int lbs_get_freq(struct net_device *dev, struct iw_request_info *info,
struct iw_freq *fwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_wap(struct net_device *dev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *vwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u32 val = vwrq->value;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_rts(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
static int lbs_set_frag(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u32 val = vwrq->value;
static int lbs_get_frag(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
static int lbs_get_mode(struct net_device *dev,
struct iw_request_info *info, u32 * uwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
s16 curlevel = 0;
int ret = 0;
static int lbs_set_retry(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 slimit = 0, llimit = 0;
static int lbs_get_retry(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
struct iw_point *dwrq, char *extra)
{
int i, j;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_range *range = (struct iw_range *)extra;
struct chan_freq_power *cfp;
u8 rates[MAX_RATES + 1];
static int lbs_set_power(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_power(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
EXCELLENT = 95,
PERFECT = 100
};
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u32 rssi_qual;
u32 tx_qual;
u32 quality = 0;
struct iw_freq *fwrq, char *extra)
{
int ret = -EINVAL;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
struct assoc_request * assoc_req;
struct iw_request_info *info,
struct iw_freq *fwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
int ret = -EINVAL;
static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u8 new_rate = 0;
int ret = -EINVAL;
u8 rates[MAX_RATES + 1];
static int lbs_get_rate(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info, u32 * uwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_point *dwrq, u8 * extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_point *dwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
u16 is_default = 0, index = 0, set_tx_key = 0;
char *extra)
{
int ret = -EINVAL;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int index, max_key_len;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int alg = ext->alg;
struct assoc_request * assoc_req;
struct iw_point *dwrq,
char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
struct assoc_request * assoc_req;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *dwrq,
char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
int ret = 0;
int updated = 0;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *vwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
s16 dbm = (s16) vwrq->value;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_essid(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_essid(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u8 ssid[IW_ESSID_MAX_SIZE];
u8 ssid_len = 0;
struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_wap(struct net_device *dev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
int ret = 0;
return NOTIFY_DONE;
}
+
+static void orinoco_register_pm_notifier(struct orinoco_private *priv)
+{
+ priv->pm_notifier.notifier_call = orinoco_pm_notifier;
+ register_pm_notifier(&priv->pm_notifier);
+}
+
+static void orinoco_unregister_pm_notifier(struct orinoco_private *priv)
+{
+ unregister_pm_notifier(&priv->pm_notifier);
+}
#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
-#define orinoco_pm_notifier NULL
+#define orinoco_register_pm_notifier(priv) do { } while(0)
+#define orinoco_unregister_pm_notifier(priv) do { } while(0)
#endif
/********************************************************************/
priv->cached_fw = NULL;
/* Register PM notifiers */
- priv->pm_notifier.notifier_call = orinoco_pm_notifier;
- register_pm_notifier(&priv->pm_notifier);
+ orinoco_register_pm_notifier(priv);
return dev;
}
kfree(rx_data);
}
- unregister_pm_notifier(&priv->pm_notifier);
+ orinoco_unregister_pm_notifier(priv);
orinoco_uncache_fw(priv);
priv->wpa_ie_len = 0;
__le32 req_id)
{
struct p54_common *priv = dev->priv;
- struct sk_buff *entry = priv->tx_queue.next;
+ struct sk_buff *entry;
unsigned long flags;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ entry = priv->tx_queue.next;
while (entry != (struct sk_buff *)&priv->tx_queue) {
struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
struct p54_common *priv = dev->priv;
struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
- struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
+ struct sk_buff *entry;
u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
struct memrecord *range = NULL;
u32 freed = 0;
int count, idx;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ entry = (struct sk_buff *) priv->tx_queue.next;
while (entry != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
struct p54_hdr *entry_hdr;
struct p54_hdr *data, u32 len)
{
struct p54_common *priv = dev->priv;
- struct sk_buff *entry = priv->tx_queue.next;
+ struct sk_buff *entry;
struct sk_buff *target_skb = NULL;
struct ieee80211_tx_info *info;
struct memrecord *range;
}
}
+ entry = priv->tx_queue.next;
while (left--) {
u32 hole_size;
info = IEEE80211_SKB_CB(entry);
{ USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* CNet */
+ { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Conceptronic */
{ USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
/* D-LINK */
{ USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Sagem */
+ { USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Siemens */
{ USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
/* SMC */
{ USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Spairon */
{ USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* SURECOM */
+ { USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Trust */
{ USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* VTech */
+ { USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Zinwell */
{ USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
{ 0, }
*/
static struct usb_device_id rt73usb_device_table[] = {
/* AboCom */
+ { USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* AL */
+ { USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Amigo */
+ { USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* AMIT */
+ { USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) },
/* Askey */
{ USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
/* ASUS */
{ USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
/* Billionton */
{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
/* Buffalo */
+ { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
/* CNet */
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Edimax */
+ { USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* EnGenius */
+ { USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gigabyte */
{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
/* Ralink */
+ { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
/* Qcom */
{ USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Samsung */
+ { USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) },
/* Senao */
{ USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
/* Sitecom */
- { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
/* Surecom */
{ USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Philips */
+ { USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
/* Planex */
{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Zcom */
+ { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* ZyXEL */
+ { USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) },
{ 0, }
};
{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
+ /* Surecom */
+ {USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
+ /* Logitech */
+ {USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
/* Netgear */
{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
/* Sitecom */
{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+ /* Sphairon Access Systems GmbH */
+ {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
+ /* Dick Smith Electronics */
+ {USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
/* Abocom */
{USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
+ /* Qcom */
+ {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
+ /* AirLive */
+ {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
{}
};
entry_header = (struct acpi_dmar_header *)(dmar + 1);
while (((unsigned long)entry_header) <
(((unsigned long)dmar) + dmar_tbl->length)) {
+ /* Avoid looping forever on bad ACPI tables */
+ if (entry_header->length == 0) {
+ printk(KERN_WARNING PREFIX
+ "Invalid 0-length structure\n");
+ ret = -EINVAL;
+ break;
+ }
+
dmar_table_print_dmar_entry(entry_header);
switch (entry_header->type) {
int map_size;
u32 ver;
static int iommu_allocated = 0;
- int agaw;
+ int agaw = 0;
iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
if (!iommu)
iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
+#ifdef CONFIG_DMAR
agaw = iommu_calculate_agaw(iommu);
if (agaw < 0) {
printk(KERN_ERR
iommu->seq_id);
goto error;
}
+#endif
iommu->agaw = agaw;
/* the registers might be more than one page */
}
}
+static int qi_check_fault(struct intel_iommu *iommu, int index)
+{
+ u32 fault;
+ int head;
+ struct q_inval *qi = iommu->qi;
+ int wait_index = (index + 1) % QI_LENGTH;
+
+ fault = readl(iommu->reg + DMAR_FSTS_REG);
+
+ /*
+ * If IQE happens, the head points to the descriptor associated
+ * with the error. No new descriptors are fetched until the IQE
+ * is cleared.
+ */
+ if (fault & DMA_FSTS_IQE) {
+ head = readl(iommu->reg + DMAR_IQH_REG);
+ if ((head >> 4) == index) {
+ memcpy(&qi->desc[index], &qi->desc[wait_index],
+ sizeof(struct qi_desc));
+ __iommu_flush_cache(iommu, &qi->desc[index],
+ sizeof(struct qi_desc));
+ writel(DMA_FSTS_IQE, iommu->reg + DMAR_FSTS_REG);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
/*
* Submit the queued invalidation descriptor to the remapping
* hardware unit and wait for its completion.
*/
-void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
+int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
{
+ int rc = 0;
struct q_inval *qi = iommu->qi;
struct qi_desc *hw, wait_desc;
int wait_index, index;
unsigned long flags;
if (!qi)
- return;
+ return 0;
hw = qi->desc;
hw[index] = *desc;
- wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
+ wait_desc.low = QI_IWD_STATUS_DATA(QI_DONE) |
+ QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]);
hw[wait_index] = wait_desc;
qi->free_head = (qi->free_head + 2) % QI_LENGTH;
qi->free_cnt -= 2;
- spin_lock(&iommu->register_lock);
/*
* update the HW tail register indicating the presence of
* new descriptors.
*/
writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
- spin_unlock(&iommu->register_lock);
while (qi->desc_status[wait_index] != QI_DONE) {
/*
* a deadlock where the interrupt context can wait indefinitely
* for free slots in the queue.
*/
+ rc = qi_check_fault(iommu, index);
+ if (rc)
+ goto out;
+
spin_unlock(&qi->q_lock);
cpu_relax();
spin_lock(&qi->q_lock);
}
-
- qi->desc_status[index] = QI_DONE;
+out:
+ qi->desc_status[index] = qi->desc_status[wait_index] = QI_DONE;
reclaim_free_desc(qi);
spin_unlock_irqrestore(&qi->q_lock, flags);
+
+ return rc;
}
/*
desc.low = QI_IEC_TYPE;
desc.high = 0;
+ /* should never fail */
qi_submit_sync(&desc, iommu);
}
int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
u64 type, int non_present_entry_flush)
{
-
struct qi_desc desc;
if (non_present_entry_flush) {
| QI_CC_GRAN(type) | QI_CC_TYPE;
desc.high = 0;
- qi_submit_sync(&desc, iommu);
-
- return 0;
-
+ return qi_submit_sync(&desc, iommu);
}
int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih)
| QI_IOTLB_AM(size_order);
- qi_submit_sync(&desc, iommu);
-
- return 0;
-
+ return qi_submit_sync(&desc, iommu);
}
/*
config HOTPLUG_PCI_RPA
tristate "RPA PCI Hotplug driver"
- depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+ depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE
help
Say Y here if you have a RPA system that supports PCI Hotplug.
int cmd_busy;
unsigned int no_cmd_complete:1;
unsigned int link_active_reporting:1;
+ unsigned int notification_enabled:1;
};
#define INT_BUTTON_IGNORE 0
extern int pciehp_unconfigure_device(struct slot *p_slot);
extern void pciehp_queue_pushbutton_work(struct work_struct *work);
struct controller *pcie_init(struct pcie_device *dev);
+int pcie_init_notification(struct controller *ctrl);
int pciehp_enable_slot(struct slot *p_slot);
int pciehp_disable_slot(struct slot *p_slot);
int pcie_enable_notification(struct controller *ctrl);
goto err_out_release_ctlr;
}
+ /* Enable events after we have setup the data structures */
+ rc = pcie_init_notification(ctrl);
+ if (rc) {
+ ctrl_err(ctrl, "Notification initialization failed\n");
+ goto err_out_release_ctlr;
+ }
+
/* Check if slot is occupied */
t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
t_slot->hpc_ops->get_adapter_status(t_slot, &value);
ctrl_warn(ctrl, "Cannot disable software notification\n");
}
-static int pcie_init_notification(struct controller *ctrl)
+int pcie_init_notification(struct controller *ctrl)
{
if (pciehp_request_irq(ctrl))
return -1;
pciehp_free_irq(ctrl);
return -1;
}
+ ctrl->notification_enabled = 1;
return 0;
}
static void pcie_shutdown_notification(struct controller *ctrl)
{
- pcie_disable_notification(ctrl);
- pciehp_free_irq(ctrl);
+ if (ctrl->notification_enabled) {
+ pcie_disable_notification(ctrl);
+ pciehp_free_irq(ctrl);
+ ctrl->notification_enabled = 0;
+ }
}
static int pcie_init_slot(struct controller *ctrl)
if (pcie_init_slot(ctrl))
goto abort_ctrl;
- if (pcie_init_notification(ctrl))
- goto abort_slot;
-
return ctrl;
-abort_slot:
- pcie_cleanup_slot(ctrl);
abort_ctrl:
kfree(ctrl);
abort:
return index;
}
-static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
+static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
{
struct qi_desc desc;
| QI_IEC_SELECTIVE;
desc.high = 0;
- qi_submit_sync(&desc, iommu);
+ return qi_submit_sync(&desc, iommu);
}
int map_irq_to_irte_handle(int irq, u16 *sub_handle)
int modify_irte(int irq, struct irte *irte_modified)
{
+ int rc;
int index;
struct irte *irte;
struct intel_iommu *iommu;
set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1));
__iommu_flush_cache(iommu, irte, sizeof(*irte));
- qi_flush_iec(iommu, index, 0);
-
+ rc = qi_flush_iec(iommu, index, 0);
spin_unlock(&irq_2_ir_lock);
- return 0;
+
+ return rc;
}
int flush_irte(int irq)
{
+ int rc;
int index;
struct intel_iommu *iommu;
struct irq_2_iommu *irq_iommu;
index = irq_iommu->irte_index + irq_iommu->sub_handle;
- qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+ rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
spin_unlock(&irq_2_ir_lock);
- return 0;
+ return rc;
}
struct intel_iommu *map_ioapic_to_ir(int apic)
int free_irte(int irq)
{
+ int rc = 0;
int index, i;
struct irte *irte;
struct intel_iommu *iommu;
if (!irq_iommu->sub_handle) {
for (i = 0; i < (1 << irq_iommu->irte_mask); i++)
set_64bit((unsigned long *)irte, 0);
- qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+ rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
}
irq_iommu->iommu = NULL;
spin_unlock(&irq_2_ir_lock);
- return 0;
+ return rc;
}
static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
}
#endif /* 0 */
+
+static void set_device_error_reporting(struct pci_dev *dev, void *data)
+{
+ bool enable = *((bool *)data);
+
+ if (dev->pcie_type != PCIE_RC_PORT &&
+ dev->pcie_type != PCIE_SW_UPSTREAM_PORT &&
+ dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT)
+ return;
+
+ if (enable)
+ pci_enable_pcie_error_reporting(dev);
+ else
+ pci_disable_pcie_error_reporting(dev);
+}
+
+/**
+ * set_downstream_devices_error_reporting - enable/disable the error reporting bits on the root port and its downstream ports.
+ * @dev: pointer to root port's pci_dev data structure
+ * @enable: true = enable error reporting, false = disable error reporting.
+ */
+static void set_downstream_devices_error_reporting(struct pci_dev *dev,
+ bool enable)
+{
+ set_device_error_reporting(dev, &enable);
+
+ if (!dev->subordinate)
+ return;
+ pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
+}
+
static int find_device_iter(struct device *device, void *data)
{
struct pci_dev *dev;
pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, ®32);
pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
- /* Enable Root Port device reporting error itself */
- pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, ®16);
- reg16 = reg16 |
- PCI_EXP_DEVCTL_CERE |
- PCI_EXP_DEVCTL_NFERE |
- PCI_EXP_DEVCTL_FERE |
- PCI_EXP_DEVCTL_URRE;
- pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL,
- reg16);
+ /*
+ * Enable error reporting for the root port device and downstream port
+ * devices.
+ */
+ set_downstream_devices_error_reporting(pdev, true);
/* Enable Root Port's interrupt in response to error messages */
pci_write_config_dword(pdev,
u32 reg32;
int pos;
+ /*
+ * Disable error reporting for the root port device and downstream port
+ * devices.
+ */
+ set_downstream_devices_error_reporting(pdev, false);
+
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
/* Disable Root's interrupt in response to error messages */
pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0);
pcie_portdrv_save_config(dev);
- pci_enable_pcie_error_reporting(dev);
-
return 0;
}
static void pcie_portdrv_remove (struct pci_dev *dev)
{
pcie_port_device_remove(dev);
+ pci_disable_device(dev);
kfree(pci_get_drvdata(dev));
}
#include <linux/acpi.h>
#include <linux/kallsyms.h>
#include <linux/dmi.h>
+#include <linux/pci-aspm.h>
#include "pci.h"
int isa_dma_bridge_buggy;
*/
#define AMD_813X_MISC 0x40
#define AMD_813X_NOIOAMODE (1<<0)
+#define AMD_813X_REV_B2 0x13
static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
{
if (noioapicquirk)
return;
+ if (dev->revision == AMD_813X_REV_B2)
+ return;
pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
pci_config_dword &= ~AMD_813X_NOIOAMODE;
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
+/*
+ * The 82575 and 82598 may experience data corruption issues when transitioning
+ * out of L0S. To prevent this we need to disable L0S on the pci-e link
+ */
+static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
+{
+ dev_info(&dev->dev, "Disabling L0s\n");
+ pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
+
static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
{
/* rev 1 ncr53c810 chips don't set the class at all which means
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
quirk_msi_ht_cap);
-
/* The nVidia CK804 chipset may have 2 HT MSI mappings.
* MSI are supported if the MSI capability set in any of these mappings.
*/
PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
ht_enable_msi_mapping);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
+ ht_enable_msi_mapping);
+
/* The P5N32-SLI Premium motherboard from Asus has a problem with msi
* for the MCP55 NIC. It is not yet determined whether the msi problem
* also affects other devices. As for now, turn off msi for this device.
PCI_DEVICE_ID_NVIDIA_NVENET_15,
nvenet_msi_disable);
-static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
+static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
{
struct pci_dev *host_bridge;
+ int pos;
+ int i, dev_no;
+ int found = 0;
+
+ dev_no = dev->devfn >> 3;
+ for (i = dev_no; i >= 0; i--) {
+ host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
+ if (!host_bridge)
+ continue;
+
+ pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ found = 1;
+ break;
+ }
+ pci_dev_put(host_bridge);
+ }
+
+ if (!found)
+ return;
+
+ /* root did that ! */
+ if (msi_ht_cap_enabled(host_bridge))
+ goto out;
+
+ ht_enable_msi_mapping(dev);
+
+out:
+ pci_dev_put(host_bridge);
+}
+
+static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
+{
int pos, ttl = 48;
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ dev_info(&dev->dev, "Disabling HT MSI Mapping\n");
+
+ pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+ flags & ~HT_MSI_FLAGS_ENABLE);
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+}
+
+static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = 48;
+ int found = 0;
+
+ /* check if there is HT MSI cap or enabled on this device */
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (found < 1)
+ found = 1;
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ if (flags & HT_MSI_FLAGS_ENABLE) {
+ if (found < 2) {
+ found = 2;
+ break;
+ }
+ }
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+
+ return found;
+}
+
+static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
+{
+ struct pci_dev *host_bridge;
+ int pos;
+ int found;
+
+ /* Enabling HT MSI mapping on this device breaks MCP51 */
+ if (dev->device == 0x270)
+ return;
+
+ /* check if there is HT MSI cap or enabled on this device */
+ found = ht_check_msi_mapping(dev);
+
+ /* no HT MSI CAP */
+ if (found == 0)
+ return;
+
/*
* HT MSI mapping should be disabled on devices that are below
* a non-Hypertransport host bridge. Locate the host bridge...
pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
if (pos != 0) {
/* Host bridge is to HT */
- ht_enable_msi_mapping(dev);
+ if (found == 1) {
+ /* it is not enabled, try to enable it */
+ nv_ht_enable_msi_mapping(dev);
+ }
return;
}
- /* Host bridge is not to HT, disable HT MSI mapping on this device */
- pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
- while (pos && ttl--) {
- u8 flags;
+ /* HT MSI is not enabled */
+ if (found == 1)
+ return;
- if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
- &flags) == 0) {
- dev_info(&dev->dev, "Disabling HT MSI mapping");
- pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
- flags & ~HT_MSI_FLAGS_ENABLE);
- }
- pos = pci_find_next_ht_capability(dev, pos,
- HT_CAPTYPE_MSI_MAPPING);
- }
+ /* Host bridge is not to HT, disable HT MSI mapping on this device */
+ ht_disable_msi_mapping(dev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk);
set_quirks();
- if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
+ if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
interface->capability &= ~ACER_CAP_BRIGHTNESS;
printk(ACER_INFO "Brightness must be controlled by "
"generic video driver\n");
di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
di->empty_uAh *= 1000; /* convert to µAh */
- /* From Maxim Application Note 131: remaining capacity =
- * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
- di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
- (di->full_active_uAh - di->empty_uAh);
+ if (di->full_active_uAh == di->empty_uAh)
+ di->rem_capacity = 0;
+ else
+ /* From Maxim Application Note 131: remaining capacity =
+ * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+ di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+ (di->full_active_uAh - di->empty_uAh);
if (di->rem_capacity < 0)
di->rem_capacity = 0;
bp->waiting = 1;
add_wait_queue(&bp->wq, &wait);
while (limit-- > 0) {
- unsigned long val;
+ long val;
val = wait_event_interruptible_timeout(
bp->wq,
#include <linux/string.h>
#include <linux/genhd.h>
#include <linux/blkdev.h>
-
-#define MAJOR_NR JSFD_MAJOR
-
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
#include <scsi/libiscsi_tcp.h>
/* from cxgb3 LLD */
struct cxgb3i_conn *cconn;
};
+/**
+ * struct cxgb3i_task_data - private iscsi task data
+ *
+ * @nr_frags: # of coalesced page frags (from scsi sgl)
+ * @frags: coalesced page frags (from scsi sgl)
+ * @skb: tx pdu skb
+ * @offset: data offset for the next pdu
+ * @count: max. possible pdu payload
+ * @sgoffset: offset to the first sg entry for a given offset
+ */
+#define MAX_PDU_FRAGS ((ULP2_MAX_PDU_PAYLOAD + 512 - 1) / 512)
+struct cxgb3i_task_data {
+ unsigned short nr_frags;
+ skb_frag_t frags[MAX_PDU_FRAGS];
+ struct sk_buff *skb;
+ unsigned int offset;
+ unsigned int count;
+ unsigned int sgoffset;
+};
+
int cxgb3i_iscsi_init(void);
void cxgb3i_iscsi_cleanup(void);
write_unlock(&cxgb3i_ddp_rwlock);
ddp_log_info("nppods %u (0x%x ~ 0x%x), bits %u, mask 0x%x,0x%x "
- "pkt %u,%u.\n",
+ "pkt %u/%u, %u/%u.\n",
ppmax, ddp->llimit, ddp->ulimit, ddp->idx_bits,
ddp->idx_mask, ddp->rsvd_tag_mask,
- ddp->max_txsz, ddp->max_rxsz);
+ ddp->max_txsz, uinfo.max_txsz,
+ ddp->max_rxsz, uinfo.max_rxsz);
return 0;
free_ddp_map:
* cxgb3i_adapter_ddp_init - initialize the adapter's ddp resource
* @tdev: t3cdev adapter
* @tformat: tag format
- * @txsz: max tx pkt size, filled in by this func.
- * @rxsz: max rx pkt size, filled in by this func.
+ * @txsz: max tx pdu payload size, filled in by this func.
+ * @rxsz: max rx pdu payload size, filled in by this func.
* initialize the ddp pagepod manager for a given adapter if needed and
* setup the tag format for a given iscsi entity
*/
tformat->sw_bits, tformat->rsvd_bits,
tformat->rsvd_shift, tformat->rsvd_mask);
- *txsz = ddp->max_txsz;
- *rxsz = ddp->max_rxsz;
- ddp_log_info("ddp max pkt size: %u, %u.\n",
- ddp->max_txsz, ddp->max_rxsz);
+ *txsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+ ddp->max_txsz - ISCSI_PDU_NONPAYLOAD_LEN);
+ *rxsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+ ddp->max_rxsz - ISCSI_PDU_NONPAYLOAD_LEN);
+ ddp_log_info("max payload size: %u/%u, %u/%u.\n",
+ *txsz, ddp->max_txsz, *rxsz, ddp->max_rxsz);
return 0;
}
EXPORT_SYMBOL_GPL(cxgb3i_adapter_ddp_init);
#ifndef __CXGB3I_ULP2_DDP_H__
#define __CXGB3I_ULP2_DDP_H__
+#include <linux/vmalloc.h>
+
/**
* struct cxgb3i_tag_format - cxgb3i ulp tag format for an iscsi entity
*
struct sk_buff **gl_skb;
};
+#define ISCSI_PDU_NONPAYLOAD_LEN 312 /* bhs(48) + ahs(256) + digest(8) */
#define ULP2_MAX_PKT_SIZE 16224
-#define ULP2_MAX_PDU_PAYLOAD (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_MAX)
+#define ULP2_MAX_PDU_PAYLOAD (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_LEN)
#define PPOD_PAGES_MAX 4
#define PPOD_PAGES_SHIFT 2 /* 4 pages per pod */
#include "cxgb3i.h"
#define DRV_MODULE_NAME "cxgb3i"
-#define DRV_MODULE_VERSION "1.0.0"
-#define DRV_MODULE_RELDATE "Jun. 1, 2008"
+#define DRV_MODULE_VERSION "1.0.1"
+#define DRV_MODULE_RELDATE "Jan. 2009"
static char version[] =
"Chelsio S3xx iSCSI Driver " DRV_MODULE_NAME
cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost,
cmds_max,
- sizeof(struct iscsi_tcp_task),
+ sizeof(struct iscsi_tcp_task) +
+ sizeof(struct cxgb3i_task_data),
initial_cmdsn, ISCSI_MAX_TARGET);
if (!cls_session)
return NULL;
{
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
- unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
- cconn->hba->snic->tx_max_size -
- ISCSI_PDU_NONPAYLOAD_MAX);
+ unsigned int max = max(512 * MAX_SKB_FRAGS, SKB_TX_HEADROOM);
+ max = min(cconn->hba->snic->tx_max_size, max);
if (conn->max_xmit_dlength)
- conn->max_xmit_dlength = min_t(unsigned int,
- conn->max_xmit_dlength, max);
+ conn->max_xmit_dlength = min(conn->max_xmit_dlength, max);
else
conn->max_xmit_dlength = max;
align_pdu_size(conn->max_xmit_dlength);
- cxgb3i_log_info("conn 0x%p, max xmit %u.\n",
+ cxgb3i_api_debug("conn 0x%p, max xmit %u.\n",
conn, conn->max_xmit_dlength);
return 0;
}
{
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
- unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
- cconn->hba->snic->rx_max_size -
- ISCSI_PDU_NONPAYLOAD_MAX);
+ unsigned int max = cconn->hba->snic->rx_max_size;
align_pdu_size(max);
if (conn->max_recv_dlength) {
conn->max_recv_dlength, max);
return -EINVAL;
}
- conn->max_recv_dlength = min_t(unsigned int,
- conn->max_recv_dlength, max);
+ conn->max_recv_dlength = min(conn->max_recv_dlength, max);
align_pdu_size(conn->max_recv_dlength);
} else
conn->max_recv_dlength = max;
.proc_name = "cxgb3i",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = iscsi_change_queue_depth,
- .can_queue = 128 * (ISCSI_DEF_XMIT_CMDS_MAX - 1),
+ .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
.cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
#include "cxgb3i_ddp.h"
#ifdef __DEBUG_C3CN_CONN__
-#define c3cn_conn_debug cxgb3i_log_info
+#define c3cn_conn_debug cxgb3i_log_debug
#else
#define c3cn_conn_debug(fmt...)
#endif
#ifdef __DEBUG_C3CN_TX__
-#define c3cn_tx_debug cxgb3i_log_debug
+#define c3cn_tx_debug cxgb3i_log_debug
#else
#define c3cn_tx_debug(fmt...)
#endif
#ifdef __DEBUG_C3CN_RX__
-#define c3cn_rx_debug cxgb3i_log_debug
+#define c3cn_rx_debug cxgb3i_log_debug
#else
#define c3cn_rx_debug(fmt...)
#endif
module_param(cxgb3_rcv_win, int, 0644);
MODULE_PARM_DESC(cxgb3_rcv_win, "TCP receive window in bytes (default=256KB)");
-static int cxgb3_snd_win = 64 * 1024;
+static int cxgb3_snd_win = 128 * 1024;
module_param(cxgb3_snd_win, int, 0644);
-MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=64KB)");
+MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=128KB)");
static int cxgb3_rx_credit_thres = 10 * 1024;
module_param(cxgb3_rx_credit_thres, int, 0644);
static void skb_entail(struct s3_conn *c3cn, struct sk_buff *skb,
int flags)
{
- CXGB3_SKB_CB(skb)->seq = c3cn->write_seq;
- CXGB3_SKB_CB(skb)->flags = flags;
+ skb_tcp_seq(skb) = c3cn->write_seq;
+ skb_flags(skb) = flags;
__skb_queue_tail(&c3cn->write_queue, skb);
}
* The number of WRs needed for an skb depends on the number of fragments
* in the skb and whether it has any payload in its main body. This maps the
* length of the gather list represented by an skb into the # of necessary WRs.
- *
- * The max. length of an skb is controlled by the max pdu size which is ~16K.
- * Also, assume the min. fragment length is the sector size (512), then add
- * extra fragment counts for iscsi bhs and payload padding.
+ * The extra two fragments are for iscsi bhs and payload padding.
*/
-#define SKB_WR_LIST_SIZE (16384/512 + 3)
+#define SKB_WR_LIST_SIZE (MAX_SKB_FRAGS + 2)
static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly;
static void s3_init_wr_tab(unsigned int wr_len)
static inline void reset_wr_list(struct s3_conn *c3cn)
{
- c3cn->wr_pending_head = NULL;
+ c3cn->wr_pending_head = c3cn->wr_pending_tail = NULL;
}
/*
static inline void enqueue_wr(struct s3_conn *c3cn,
struct sk_buff *skb)
{
- skb_wr_data(skb) = NULL;
+ skb_tx_wr_next(skb) = NULL;
/*
* We want to take an extra reference since both us and the driver
if (!c3cn->wr_pending_head)
c3cn->wr_pending_head = skb;
else
- skb_wr_data(skb) = skb;
+ skb_tx_wr_next(c3cn->wr_pending_tail) = skb;
c3cn->wr_pending_tail = skb;
}
+static int count_pending_wrs(struct s3_conn *c3cn)
+{
+ int n = 0;
+ const struct sk_buff *skb = c3cn->wr_pending_head;
+
+ while (skb) {
+ n += skb->csum;
+ skb = skb_tx_wr_next(skb);
+ }
+ return n;
+}
+
static inline struct sk_buff *peek_wr(const struct s3_conn *c3cn)
{
return c3cn->wr_pending_head;
if (likely(skb)) {
/* Don't bother clearing the tail */
- c3cn->wr_pending_head = skb_wr_data(skb);
- skb_wr_data(skb) = NULL;
+ c3cn->wr_pending_head = skb_tx_wr_next(skb);
+ skb_tx_wr_next(skb) = NULL;
}
return skb;
}
}
static inline void make_tx_data_wr(struct s3_conn *c3cn, struct sk_buff *skb,
- int len)
+ int len, int req_completion)
{
struct tx_data_wr *req;
skb_reset_transport_header(skb);
req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req));
- req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA));
+ req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA) |
+ (req_completion ? F_WR_COMPL : 0));
req->wr_lo = htonl(V_WR_TID(c3cn->tid));
req->sndseq = htonl(c3cn->snd_nxt);
/* len includes the length of any HW ULP additions */
if (unlikely(c3cn->state == C3CN_STATE_CONNECTING ||
c3cn->state == C3CN_STATE_CLOSE_WAIT_1 ||
- c3cn->state == C3CN_STATE_ABORTING)) {
+ c3cn->state >= C3CN_STATE_ABORTING)) {
c3cn_tx_debug("c3cn 0x%p, in closing state %u.\n",
c3cn, c3cn->state);
return 0;
if (c3cn->wr_avail < wrs_needed) {
c3cn_tx_debug("c3cn 0x%p, skb len %u/%u, frag %u, "
"wr %d < %u.\n",
- c3cn, skb->len, skb->datalen, frags,
+ c3cn, skb->len, skb->data_len, frags,
wrs_needed, c3cn->wr_avail);
break;
}
c3cn->wr_unacked += wrs_needed;
enqueue_wr(c3cn, skb);
- if (likely(CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_NEED_HDR)) {
- len += ulp_extra_len(skb);
- make_tx_data_wr(c3cn, skb, len);
- c3cn->snd_nxt += len;
- if ((req_completion
- && c3cn->wr_unacked == wrs_needed)
- || (CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_COMPL)
- || c3cn->wr_unacked >= c3cn->wr_max / 2) {
- struct work_request_hdr *wr = cplhdr(skb);
+ c3cn_tx_debug("c3cn 0x%p, enqueue, skb len %u/%u, frag %u, "
+ "wr %d, left %u, unack %u.\n",
+ c3cn, skb->len, skb->data_len, frags,
+ wrs_needed, c3cn->wr_avail, c3cn->wr_unacked);
+
- wr->wr_hi |= htonl(F_WR_COMPL);
+ if (likely(skb_flags(skb) & C3CB_FLAG_NEED_HDR)) {
+ if ((req_completion &&
+ c3cn->wr_unacked == wrs_needed) ||
+ (skb_flags(skb) & C3CB_FLAG_COMPL) ||
+ c3cn->wr_unacked >= c3cn->wr_max / 2) {
+ req_completion = 1;
c3cn->wr_unacked = 0;
}
- CXGB3_SKB_CB(skb)->flags &= ~C3CB_FLAG_NEED_HDR;
+ len += ulp_extra_len(skb);
+ make_tx_data_wr(c3cn, skb, len, req_completion);
+ c3cn->snd_nxt += len;
+ skb_flags(skb) &= ~C3CB_FLAG_NEED_HDR;
}
total_size += skb->truesize;
if (unlikely(c3cn_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED)))
/* upper layer has requested closing */
send_abort_req(c3cn);
- else if (c3cn_push_tx_frames(c3cn, 1))
+ else {
+ if (skb_queue_len(&c3cn->write_queue))
+ c3cn_push_tx_frames(c3cn, 1);
cxgb3i_conn_tx_open(c3cn);
+ }
}
static int do_act_establish(struct t3cdev *cdev, struct sk_buff *skb,
return;
}
- CXGB3_SKB_CB(skb)->seq = ntohl(hdr_cpl->seq);
- CXGB3_SKB_CB(skb)->flags = 0;
+ skb_tcp_seq(skb) = ntohl(hdr_cpl->seq);
+ skb_flags(skb) = 0;
skb_reset_transport_header(skb);
__skb_pull(skb, sizeof(struct cpl_iscsi_hdr));
goto abort_conn;
skb_ulp_mode(skb) = ULP2_FLAG_DATA_READY;
- skb_ulp_pdulen(skb) = ntohs(ddp_cpl.len);
- skb_ulp_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
+ skb_rx_pdulen(skb) = ntohs(ddp_cpl.len);
+ skb_rx_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
status = ntohl(ddp_cpl.ddp_status);
c3cn_rx_debug("rx skb 0x%p, len %u, pdulen %u, ddp status 0x%x.\n",
- skb, skb->len, skb_ulp_pdulen(skb), status);
+ skb, skb->len, skb_rx_pdulen(skb), status);
if (status & (1 << RX_DDP_STATUS_HCRC_SHIFT))
skb_ulp_mode(skb) |= ULP2_FLAG_HCRC_ERROR;
} else if (status & (1 << RX_DDP_STATUS_DDP_SHIFT))
skb_ulp_mode(skb) |= ULP2_FLAG_DATA_DDPED;
- c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_ulp_pdulen(skb);
+ c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_rx_pdulen(skb);
__pskb_trim(skb, len);
__skb_queue_tail(&c3cn->receive_queue, skb);
cxgb3i_conn_pdu_ready(c3cn);
* Process an acknowledgment of WR completion. Advance snd_una and send the
* next batch of work requests from the write queue.
*/
+static void check_wr_invariants(struct s3_conn *c3cn)
+{
+ int pending = count_pending_wrs(c3cn);
+
+ if (unlikely(c3cn->wr_avail + pending != c3cn->wr_max))
+ cxgb3i_log_error("TID %u: credit imbalance: avail %u, "
+ "pending %u, total should be %u\n",
+ c3cn->tid, c3cn->wr_avail, pending,
+ c3cn->wr_max);
+}
+
static void process_wr_ack(struct s3_conn *c3cn, struct sk_buff *skb)
{
struct cpl_wr_ack *hdr = cplhdr(skb);
unsigned int credits = ntohs(hdr->credits);
u32 snd_una = ntohl(hdr->snd_una);
+ c3cn_tx_debug("%u WR credits, avail %u, unack %u, TID %u, state %u.\n",
+ credits, c3cn->wr_avail, c3cn->wr_unacked,
+ c3cn->tid, c3cn->state);
+
c3cn->wr_avail += credits;
if (c3cn->wr_unacked > c3cn->wr_max - c3cn->wr_avail)
c3cn->wr_unacked = c3cn->wr_max - c3cn->wr_avail;
break;
}
if (unlikely(credits < p->csum)) {
+ struct tx_data_wr *w = cplhdr(p);
+ cxgb3i_log_error("TID %u got %u WR credits need %u, "
+ "len %u, main body %u, frags %u, "
+ "seq # %u, ACK una %u, ACK nxt %u, "
+ "WR_AVAIL %u, WRs pending %u\n",
+ c3cn->tid, credits, p->csum, p->len,
+ p->len - p->data_len,
+ skb_shinfo(p)->nr_frags,
+ ntohl(w->sndseq), snd_una,
+ ntohl(hdr->snd_nxt), c3cn->wr_avail,
+ count_pending_wrs(c3cn) - credits);
p->csum -= credits;
break;
} else {
}
}
- if (unlikely(before(snd_una, c3cn->snd_una)))
+ check_wr_invariants(c3cn);
+
+ if (unlikely(before(snd_una, c3cn->snd_una))) {
+ cxgb3i_log_error("TID %u, unexpected sequence # %u in WR_ACK "
+ "snd_una %u\n",
+ c3cn->tid, snd_una, c3cn->snd_una);
goto out_free;
+ }
if (c3cn->snd_una != snd_una) {
c3cn->snd_una = snd_una;
dst_confirm(c3cn->dst_cache);
}
- if (skb_queue_len(&c3cn->write_queue) && c3cn_push_tx_frames(c3cn, 0))
+ if (skb_queue_len(&c3cn->write_queue)) {
+ if (c3cn_push_tx_frames(c3cn, 0))
+ cxgb3i_conn_tx_open(c3cn);
+ } else
cxgb3i_conn_tx_open(c3cn);
out_free:
__kfree_skb(skb);
struct dst_entry *dst)
{
BUG_ON(c3cn->cdev != cdev);
- c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs;
+ c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs - 1;
c3cn->wr_unacked = 0;
c3cn->mss_idx = select_mss(c3cn, dst_mtu(dst));
goto out_err;
}
- err = -EPIPE;
if (c3cn->err) {
c3cn_tx_debug("c3cn 0x%p, err %d.\n", c3cn, c3cn->err);
+ err = -EPIPE;
+ goto out_err;
+ }
+
+ if (c3cn->write_seq - c3cn->snd_una >= cxgb3_snd_win) {
+ c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
+ c3cn, c3cn->write_seq, c3cn->snd_una,
+ cxgb3_snd_win);
+ err = -EAGAIN;
goto out_err;
}
* @flag: see C3CB_FLAG_* below
* @ulp_mode: ULP mode/submode of sk_buff
* @seq: tcp sequence number
- * @ddigest: pdu data digest
- * @pdulen: recovered pdu length
- * @wr_data: scratch area for tx wr
*/
+struct cxgb3_skb_rx_cb {
+ __u32 ddigest; /* data digest */
+ __u32 pdulen; /* recovered pdu length */
+};
+
+struct cxgb3_skb_tx_cb {
+ struct sk_buff *wr_next; /* next wr */
+};
+
struct cxgb3_skb_cb {
__u8 flags;
__u8 ulp_mode;
__u32 seq;
- __u32 ddigest;
- __u32 pdulen;
- struct sk_buff *wr_data;
+ union {
+ struct cxgb3_skb_rx_cb rx;
+ struct cxgb3_skb_tx_cb tx;
+ };
};
#define CXGB3_SKB_CB(skb) ((struct cxgb3_skb_cb *)&((skb)->cb[0]))
-
+#define skb_flags(skb) (CXGB3_SKB_CB(skb)->flags)
#define skb_ulp_mode(skb) (CXGB3_SKB_CB(skb)->ulp_mode)
-#define skb_ulp_ddigest(skb) (CXGB3_SKB_CB(skb)->ddigest)
-#define skb_ulp_pdulen(skb) (CXGB3_SKB_CB(skb)->pdulen)
-#define skb_wr_data(skb) (CXGB3_SKB_CB(skb)->wr_data)
+#define skb_tcp_seq(skb) (CXGB3_SKB_CB(skb)->seq)
+#define skb_rx_ddigest(skb) (CXGB3_SKB_CB(skb)->rx.ddigest)
+#define skb_rx_pdulen(skb) (CXGB3_SKB_CB(skb)->rx.pdulen)
+#define skb_tx_wr_next(skb) (CXGB3_SKB_CB(skb)->tx.wr_next)
enum c3cb_flags {
C3CB_FLAG_NEED_HDR = 1 << 0, /* packet needs a TX_DATA_WR header */
/* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
#define TX_HEADER_LEN \
(sizeof(struct tx_data_wr) + sizeof(struct sge_opaque_hdr))
+#define SKB_TX_HEADROOM SKB_MAX_HEAD(TX_HEADER_LEN)
/*
* get and set private ip for iscsi traffic
#define cxgb3i_tx_debug(fmt...)
#endif
+/* always allocate rooms for AHS */
+#define SKB_TX_PDU_HEADER_LEN \
+ (sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE)
+static unsigned int skb_extra_headroom;
static struct page *pad_page;
/*
void cxgb3i_conn_cleanup_task(struct iscsi_task *task)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = task->dd_data +
+ sizeof(struct iscsi_tcp_task);
/* never reached the xmit task callout */
- if (tcp_task->dd_data)
- kfree_skb(tcp_task->dd_data);
- tcp_task->dd_data = NULL;
+ if (tdata->skb)
+ __kfree_skb(tdata->skb);
+ memset(tdata, 0, sizeof(struct cxgb3i_task_data));
/* MNC - Do we need a check in case this is called but
* cxgb3i_conn_alloc_pdu has never been called on the task */
iscsi_tcp_cleanup_task(task);
}
-/*
- * We do not support ahs yet
- */
+static int sgl_seek_offset(struct scatterlist *sgl, unsigned int sgcnt,
+ unsigned int offset, unsigned int *off,
+ struct scatterlist **sgp)
+{
+ int i;
+ struct scatterlist *sg;
+
+ for_each_sg(sgl, sg, sgcnt, i) {
+ if (offset < sg->length) {
+ *off = offset;
+ *sgp = sg;
+ return 0;
+ }
+ offset -= sg->length;
+ }
+ return -EFAULT;
+}
+
+static int sgl_read_to_frags(struct scatterlist *sg, unsigned int sgoffset,
+ unsigned int dlen, skb_frag_t *frags,
+ int frag_max)
+{
+ unsigned int datalen = dlen;
+ unsigned int sglen = sg->length - sgoffset;
+ struct page *page = sg_page(sg);
+ int i;
+
+ i = 0;
+ do {
+ unsigned int copy;
+
+ if (!sglen) {
+ sg = sg_next(sg);
+ if (!sg) {
+ cxgb3i_log_error("%s, sg NULL, len %u/%u.\n",
+ __func__, datalen, dlen);
+ return -EINVAL;
+ }
+ sgoffset = 0;
+ sglen = sg->length;
+ page = sg_page(sg);
+
+ }
+ copy = min(datalen, sglen);
+ if (i && page == frags[i - 1].page &&
+ sgoffset + sg->offset ==
+ frags[i - 1].page_offset + frags[i - 1].size) {
+ frags[i - 1].size += copy;
+ } else {
+ if (i >= frag_max) {
+ cxgb3i_log_error("%s, too many pages %u, "
+ "dlen %u.\n", __func__,
+ frag_max, dlen);
+ return -EINVAL;
+ }
+
+ frags[i].page = page;
+ frags[i].page_offset = sg->offset + sgoffset;
+ frags[i].size = copy;
+ i++;
+ }
+ datalen -= copy;
+ sgoffset += copy;
+ sglen -= copy;
+ } while (datalen);
+
+ return i;
+}
+
int cxgb3i_conn_alloc_pdu(struct iscsi_task *task, u8 opcode)
{
+ struct iscsi_conn *conn = task->conn;
struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb;
+ struct cxgb3i_task_data *tdata = task->dd_data + sizeof(*tcp_task);
+ struct scsi_cmnd *sc = task->sc;
+ int headroom = SKB_TX_PDU_HEADER_LEN;
+ tcp_task->dd_data = tdata;
task->hdr = NULL;
- /* always allocate rooms for AHS */
- skb = alloc_skb(sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE +
- TX_HEADER_LEN, GFP_ATOMIC);
- if (!skb)
+
+ /* write command, need to send data pdus */
+ if (skb_extra_headroom && (opcode == ISCSI_OP_SCSI_DATA_OUT ||
+ (opcode == ISCSI_OP_SCSI_CMD &&
+ (scsi_bidi_cmnd(sc) || sc->sc_data_direction == DMA_TO_DEVICE))))
+ headroom += min(skb_extra_headroom, conn->max_xmit_dlength);
+
+ tdata->skb = alloc_skb(TX_HEADER_LEN + headroom, GFP_ATOMIC);
+ if (!tdata->skb)
return -ENOMEM;
+ skb_reserve(tdata->skb, TX_HEADER_LEN);
cxgb3i_tx_debug("task 0x%p, opcode 0x%x, skb 0x%p.\n",
- task, opcode, skb);
+ task, opcode, tdata->skb);
- tcp_task->dd_data = skb;
- skb_reserve(skb, TX_HEADER_LEN);
- task->hdr = (struct iscsi_hdr *)skb->data;
- task->hdr_max = sizeof(struct iscsi_hdr);
+ task->hdr = (struct iscsi_hdr *)tdata->skb->data;
+ task->hdr_max = SKB_TX_PDU_HEADER_LEN;
/* data_out uses scsi_cmd's itt */
if (opcode != ISCSI_OP_SCSI_DATA_OUT)
int cxgb3i_conn_init_pdu(struct iscsi_task *task, unsigned int offset,
unsigned int count)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb = tcp_task->dd_data;
struct iscsi_conn *conn = task->conn;
- struct page *pg;
+ struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+ struct sk_buff *skb = tdata->skb;
unsigned int datalen = count;
int i, padlen = iscsi_padding(count);
- skb_frag_t *frag;
+ struct page *pg;
cxgb3i_tx_debug("task 0x%p,0x%p, offset %u, count %u, skb 0x%p.\n",
task, task->sc, offset, count, skb);
return 0;
if (task->sc) {
- struct scatterlist *sg;
- struct scsi_data_buffer *sdb;
- unsigned int sgoffset = offset;
- struct page *sgpg;
- unsigned int sglen;
-
- sdb = scsi_out(task->sc);
- sg = sdb->table.sgl;
-
- for_each_sg(sdb->table.sgl, sg, sdb->table.nents, i) {
- cxgb3i_tx_debug("sg %d, page 0x%p, len %u offset %u\n",
- i, sg_page(sg), sg->length, sg->offset);
-
- if (sgoffset < sg->length)
- break;
- sgoffset -= sg->length;
+ struct scsi_data_buffer *sdb = scsi_out(task->sc);
+ struct scatterlist *sg = NULL;
+ int err;
+
+ tdata->offset = offset;
+ tdata->count = count;
+ err = sgl_seek_offset(sdb->table.sgl, sdb->table.nents,
+ tdata->offset, &tdata->sgoffset, &sg);
+ if (err < 0) {
+ cxgb3i_log_warn("tpdu, sgl %u, bad offset %u/%u.\n",
+ sdb->table.nents, tdata->offset,
+ sdb->length);
+ return err;
}
- sgpg = sg_page(sg);
- sglen = sg->length - sgoffset;
-
- do {
- int j = skb_shinfo(skb)->nr_frags;
- unsigned int copy;
-
- if (!sglen) {
- sg = sg_next(sg);
- sgpg = sg_page(sg);
- sgoffset = 0;
- sglen = sg->length;
- ++i;
+ err = sgl_read_to_frags(sg, tdata->sgoffset, tdata->count,
+ tdata->frags, MAX_PDU_FRAGS);
+ if (err < 0) {
+ cxgb3i_log_warn("tpdu, sgl %u, bad offset %u + %u.\n",
+ sdb->table.nents, tdata->offset,
+ tdata->count);
+ return err;
+ }
+ tdata->nr_frags = err;
+
+ if (tdata->nr_frags > MAX_SKB_FRAGS ||
+ (padlen && tdata->nr_frags == MAX_SKB_FRAGS)) {
+ char *dst = skb->data + task->hdr_len;
+ skb_frag_t *frag = tdata->frags;
+
+ /* data fits in the skb's headroom */
+ for (i = 0; i < tdata->nr_frags; i++, frag++) {
+ char *src = kmap_atomic(frag->page,
+ KM_SOFTIRQ0);
+
+ memcpy(dst, src+frag->page_offset, frag->size);
+ dst += frag->size;
+ kunmap_atomic(src, KM_SOFTIRQ0);
}
- copy = min(sglen, datalen);
- if (j && skb_can_coalesce(skb, j, sgpg,
- sg->offset + sgoffset)) {
- skb_shinfo(skb)->frags[j - 1].size += copy;
- } else {
- get_page(sgpg);
- skb_fill_page_desc(skb, j, sgpg,
- sg->offset + sgoffset, copy);
+ if (padlen) {
+ memset(dst, 0, padlen);
+ padlen = 0;
}
- sgoffset += copy;
- sglen -= copy;
- datalen -= copy;
- } while (datalen);
+ skb_put(skb, count + padlen);
+ } else {
+ /* data fit into frag_list */
+ for (i = 0; i < tdata->nr_frags; i++)
+ get_page(tdata->frags[i].page);
+
+ memcpy(skb_shinfo(skb)->frags, tdata->frags,
+ sizeof(skb_frag_t) * tdata->nr_frags);
+ skb_shinfo(skb)->nr_frags = tdata->nr_frags;
+ skb->len += count;
+ skb->data_len += count;
+ skb->truesize += count;
+ }
+
} else {
pg = virt_to_page(task->data);
- while (datalen) {
- i = skb_shinfo(skb)->nr_frags;
- frag = &skb_shinfo(skb)->frags[i];
-
- get_page(pg);
- frag->page = pg;
- frag->page_offset = 0;
- frag->size = min((unsigned int)PAGE_SIZE, datalen);
-
- skb_shinfo(skb)->nr_frags++;
- datalen -= frag->size;
- pg++;
- }
+ get_page(pg);
+ skb_fill_page_desc(skb, 0, pg, offset_in_page(task->data),
+ count);
+ skb->len += count;
+ skb->data_len += count;
+ skb->truesize += count;
}
if (padlen) {
i = skb_shinfo(skb)->nr_frags;
- frag = &skb_shinfo(skb)->frags[i];
- frag->page = pad_page;
- frag->page_offset = 0;
- frag->size = padlen;
- skb_shinfo(skb)->nr_frags++;
+ get_page(pad_page);
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, pad_page, 0,
+ padlen);
+
+ skb->data_len += padlen;
+ skb->truesize += padlen;
+ skb->len += padlen;
}
- datalen = count + padlen;
- skb->data_len += datalen;
- skb->truesize += datalen;
- skb->len += datalen;
return 0;
}
int cxgb3i_conn_xmit_pdu(struct iscsi_task *task)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb = tcp_task->dd_data;
struct iscsi_tcp_conn *tcp_conn = task->conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
+ struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+ struct sk_buff *skb = tdata->skb;
unsigned int datalen;
int err;
return 0;
datalen = skb->data_len;
- tcp_task->dd_data = NULL;
+ tdata->skb = NULL;
err = cxgb3i_c3cn_send_pdus(cconn->cep->c3cn, skb);
- cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
- task, skb, skb->len, skb->data_len, err);
if (err > 0) {
int pdulen = err;
+ cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
+ task, skb, skb->len, skb->data_len, err);
+
if (task->conn->hdrdgst_en)
pdulen += ISCSI_DIGEST_SIZE;
if (datalen && task->conn->datadgst_en)
return err;
}
/* reset skb to send when we are called again */
- tcp_task->dd_data = skb;
+ tdata->skb = skb;
return -EAGAIN;
}
int cxgb3i_pdu_init(void)
{
+ if (SKB_TX_HEADROOM > (512 * MAX_SKB_FRAGS))
+ skb_extra_headroom = SKB_TX_HEADROOM;
pad_page = alloc_page(GFP_KERNEL);
if (!pad_page)
return -ENOMEM;
skb = skb_peek(&c3cn->receive_queue);
while (!err && skb) {
__skb_unlink(skb, &c3cn->receive_queue);
- read += skb_ulp_pdulen(skb);
+ read += skb_rx_pdulen(skb);
+ cxgb3i_rx_debug("conn 0x%p, cn 0x%p, rx skb 0x%p, pdulen %u.\n",
+ conn, c3cn, skb, skb_rx_pdulen(skb));
err = cxgb3i_conn_read_pdu_skb(conn, skb);
__kfree_skb(skb);
skb = skb_peek(&c3cn->receive_queue);
cxgb3i_c3cn_rx_credits(c3cn, read);
}
conn->rxdata_octets += read;
+
+ if (err) {
+ cxgb3i_log_info("conn 0x%p rx failed err %d.\n", conn, err);
+ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+ }
}
void cxgb3i_conn_tx_open(struct s3_conn *c3cn)
#define ULP2_FLAG_DCRC_ERROR 0x20
#define ULP2_FLAG_PAD_ERROR 0x40
-void cxgb3i_conn_closing(struct s3_conn *);
+void cxgb3i_conn_closing(struct s3_conn *c3cn);
void cxgb3i_conn_pdu_ready(struct s3_conn *c3cn);
void cxgb3i_conn_tx_open(struct s3_conn *c3cn);
#endif
{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
action = ACTION_FAIL;
break;
case ABORTED_COMMAND:
+ action = ACTION_FAIL;
if (sshdr.asc == 0x10) { /* DIF */
description = "Target Data Integrity Failure";
- action = ACTION_FAIL;
error = -EILSEQ;
- } else
- action = ACTION_RETRY;
+ }
break;
case NOT_READY:
/* If the device is in the process of becoming
static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
static void sd_print_result(struct scsi_disk *, int);
+static DEFINE_SPINLOCK(sd_index_lock);
static DEFINE_IDA(sd_index_ida);
/* This semaphore is used to mediate the 0->1 reference get in the
if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
goto out_put;
+ spin_lock(&sd_index_lock);
error = ida_get_new(&sd_index_ida, &index);
+ spin_unlock(&sd_index_lock);
} while (error == -EAGAIN);
if (error)
return 0;
out_free_index:
+ spin_lock(&sd_index_lock);
ida_remove(&sd_index_ida, index);
+ spin_unlock(&sd_index_lock);
out_put:
put_disk(gd);
out_free:
struct scsi_disk *sdkp = to_scsi_disk(dev);
struct gendisk *disk = sdkp->disk;
+ spin_lock(&sd_index_lock);
ida_remove(&sd_index_ida, sdkp->index);
+ spin_unlock(&sd_index_lock);
disk->private_data = NULL;
put_disk(disk);
# define SCSPTR3 0xffed0024 /* 16 bit SCIF */
# define SCSPTR4 0xffee0024 /* 16 bit SCIF */
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
-# define SCIF_OPER 0x0001 /* Overrun error bit */
+# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
defined(CONFIG_CPU_SUBTYPE_SH7203) || \
if (scan_timer.function != NULL)
del_timer(&scan_timer);
- if (keypad_enabled)
- misc_deregister(&keypad_dev);
+ if (pprt != NULL) {
+ if (keypad_enabled)
+ misc_deregister(&keypad_dev);
+
+ if (lcd_enabled) {
+ panel_lcd_print("\x0cLCD driver " PANEL_VERSION
+ "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
+ misc_deregister(&lcd_dev);
+ }
- if (lcd_enabled) {
- panel_lcd_print("\x0cLCD driver " PANEL_VERSION
- "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
- misc_deregister(&lcd_dev);
+ /* TODO: free all input signals */
+ parport_release(pprt);
+ parport_unregister_device(pprt);
}
-
- /* TODO: free all input signals */
-
- parport_release(pprt);
- parport_unregister_device(pprt);
parport_unregister_driver(&panel_driver);
}
config RTL8187SE
tristate "RealTek RTL8187SE Wireless LAN NIC driver"
depends on PCI
+ depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
default N
---help---
void ieee80211_crypto_deinit(void)
{
struct list_head *ptr, *n;
+ struct ieee80211_crypto_alg *alg = NULL;
if (hcrypt == NULL)
return;
- for (ptr = hcrypt->algs.next, n = ptr->next; ptr != &hcrypt->algs;
- ptr = n, n = ptr->next) {
- struct ieee80211_crypto_alg *alg =
- (struct ieee80211_crypto_alg *) ptr;
- list_del(ptr);
- printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
- "'%s' (deinit)\n", alg->ops->name);
- kfree(alg);
+ list_for_each_safe(ptr, n, &hcrypt->algs) {
+ alg = list_entry(ptr, struct ieee80211_crypto_alg, list);
+ if (alg) {
+ list_del(ptr);
+ printk(KERN_DEBUG
+ "ieee80211_crypt: unregistered algorithm '%s' (deinit)\n",
+ alg->ops->name);
+ kfree(alg);
+ }
}
-
kfree(hcrypt);
}
{
pci_unregister_driver (&rtl8180_pci_driver);
rtl8180_proc_module_remove();
- ieee80211_crypto_deinit();
ieee80211_crypto_tkip_exit();
ieee80211_crypto_ccmp_exit();
ieee80211_crypto_wep_exit();
+ ieee80211_crypto_deinit();
DMESG("Exiting");
}
struct usb_device *udev = interface_to_usbdev(intf);
struct wbsoft_priv *priv;
struct ieee80211_hw *dev;
- int err;
+ int nr, err;
usb_get_dev(udev);
// 20060630.2 Check the device if it already be opened
- err = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
- 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
- 0x0, 0x400, <mp, 4, HZ*100 );
- if (err)
+ nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
+ 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
+ 0x0, 0x400, <mp, 4, HZ*100 );
+ if (nr < 0) {
+ err = nr;
goto error;
+ }
ltmp = cpu_to_le32(ltmp);
if (ltmp) { // Is already initialized?
}
dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
- if (!dev)
+ if (!dev) {
+ err = -ENOMEM;
goto error;
+ }
priv = dev->priv;
}
dev->extra_tx_headroom = 12; /* FIXME */
- dev->flags = 0;
+ dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
dev->channel_change_time = 1000;
+ dev->max_signal = 100;
dev->queues = 1;
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;
{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+ },
+ { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+ .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+ data interface instead of
+ communications interface.
+ Maybe we should define a new
+ quirk for this. */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
if (result <= 0 && result != -ETIMEDOUT)
continue;
if (result > 1 && ((u8 *)buf)[1] != type) {
- result = -EPROTO;
+ result = -ENODATA;
continue;
}
break;
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
(USB_DT_STRING << 8) + index, langid, buf, size,
USB_CTRL_GET_TIMEOUT);
- if (!(result == 0 || result == -EPIPE))
- break;
+ if (result == 0 || result == -EPIPE)
+ continue;
+ if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+ result = -ENODATA;
+ continue;
+ }
+ break;
}
return result;
}
boolean "OMAP USB Device Controller"
depends on ARCH_OMAP
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+ select USB_OTG_UTILS if ARCH_OMAP
help
Many Texas Instruments OMAP processors have flexible full
speed USB device controllers, with support for up to 30
f->hs_descriptors = usb_copy_descriptors(hs_function);
obex->hs.obex_in = usb_find_endpoint(hs_function,
- f->descriptors, &obex_hs_ep_in_desc);
+ f->hs_descriptors, &obex_hs_ep_in_desc);
obex->hs.obex_out = usb_find_endpoint(hs_function,
- f->descriptors, &obex_hs_ep_out_desc);
+ f->hs_descriptors, &obex_hs_ep_out_desc);
}
/* Avoid letting this gadget enumerate until the userspace
mod_data.protocol_type = USB_SC_SCSI;
mod_data.protocol_name = "Transparent SCSI";
- if (gadget_is_sh(fsg->gadget))
+ /* Some peripheral controllers are known not to be able to
+ * halt bulk endpoints correctly. If one of them is present,
+ * disable stalls.
+ */
+ if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget))
mod_data.can_stall = 0;
if (mod_data.release == 0xffff) { // Parameter wasn't set
}
if (zlt)
tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+
p_QH->max_pkt_length = cpu_to_le32(tmp);
+ p_QH->next_dtd_ptr = 1;
+ p_QH->size_ioc_int_sts = 0;
return;
}
* periodic_size can shrink by USBCMD update if hcc_params allows.
*/
ehci->periodic_size = DEFAULT_I_TDPS;
+ INIT_LIST_HEAD(&ehci->cached_itd_list);
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
return retval;
ehci->reclaim = NULL;
ehci->next_uframe = -1;
+ ehci->clock_frame = -1;
/*
* dedicate a qh for the async ring head, since we couldn't unlink
static void ehci_mem_cleanup (struct ehci_hcd *ehci)
{
+ free_cached_itd_list(ehci);
if (ehci->async)
qh_put (ehci->async);
ehci->async = NULL;
is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0;
stream->bEndpointAddress &= 0x0f;
- stream->ep->hcpriv = NULL;
+ if (stream->ep)
+ stream->ep->hcpriv = NULL;
if (stream->rescheduled) {
ehci_info (ehci, "ep%d%s-iso rescheduled "
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
}
iso_stream_put (ehci, stream);
- /* OK to recycle this ITD now that its completion callback ran. */
+
done:
usb_put_urb(urb);
itd->urb = NULL;
- itd->stream = NULL;
- list_move(&itd->itd_list, &stream->free_list);
- iso_stream_put(ehci, stream);
-
+ if (ehci->clock_frame != itd->frame || itd->index[7] != -1) {
+ /* OK to recycle this ITD now. */
+ itd->stream = NULL;
+ list_move(&itd->itd_list, &stream->free_list);
+ iso_stream_put(ehci, stream);
+ } else {
+ /* HW might remember this ITD, so we can't recycle it yet.
+ * Move it to a safe place until a new frame starts.
+ */
+ list_move(&itd->itd_list, &ehci->cached_itd_list);
+ if (stream->refcount == 2) {
+ /* If iso_stream_put() were called here, stream
+ * would be freed. Instead, just prevent reuse.
+ */
+ stream->ep->hcpriv = NULL;
+ stream->ep = NULL;
+ }
+ }
return retval;
}
/*-------------------------------------------------------------------------*/
+static void free_cached_itd_list(struct ehci_hcd *ehci)
+{
+ struct ehci_itd *itd, *n;
+
+ list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
+ struct ehci_iso_stream *stream = itd->stream;
+ itd->stream = NULL;
+ list_move(&itd->itd_list, &stream->free_list);
+ iso_stream_put(ehci, stream);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
static void
scan_periodic (struct ehci_hcd *ehci)
{
* Touches as few pages as possible: cache-friendly.
*/
now_uframe = ehci->next_uframe;
- if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+ if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
clock = ehci_readl(ehci, &ehci->regs->frame_index);
- else
+ clock_frame = (clock >> 3) % ehci->periodic_size;
+ } else {
clock = now_uframe + mod - 1;
+ clock_frame = -1;
+ }
+ if (ehci->clock_frame != clock_frame) {
+ free_cached_itd_list(ehci);
+ ehci->clock_frame = clock_frame;
+ }
clock %= mod;
clock_frame = clock >> 3;
/* rescan the rest of this frame, then ... */
clock = now;
clock_frame = clock >> 3;
+ if (ehci->clock_frame != clock_frame) {
+ free_cached_itd_list(ehci);
+ ehci->clock_frame = clock_frame;
+ }
} else {
now_uframe++;
now_uframe %= mod;
int next_uframe; /* scan periodic, start here */
unsigned periodic_sched; /* periodic activity count */
+ /* list of itds completed while clock_frame was still active */
+ struct list_head cached_itd_list;
+ unsigned clock_frame;
+
/* per root hub port */
unsigned long reset_done [EHCI_MAX_ROOT_PORTS];
}
}
+static void free_cached_itd_list(struct ehci_hcd *ehci);
+
/*-------------------------------------------------------------------------*/
#include <linux/usb/ehci_def.h>
u32 revision;
musb->mregs += DAVINCI_BASE_OFFSET;
-#if 0
- /* REVISIT there's something odd about clocking, this
- * didn't appear do the job ...
- */
- musb->clock = clk_get(pDevice, "usb");
- if (IS_ERR(musb->clock))
- return PTR_ERR(musb->clock);
- status = clk_enable(musb->clock);
- if (status < 0)
- return -ENODEV;
-#endif
+ clk_enable(musb->clock);
/* returns zero if e.g. not clocked */
revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
}
phy_off();
+
+ clk_disable(musb->clock);
+
return 0;
}
unsigned musb_debug;
-module_param(musb_debug, uint, S_IRUGO | S_IWUSR);
+module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_HOST:
case OTG_STATE_A_SUSPEND:
+ usb_hcd_resume_root_hub(musb_to_hcd(musb));
musb_root_disconnect(musb);
if (musb->a_wait_bcon != 0)
musb_platform_try_idle(musb, jiffies
#ifdef CONFIG_SYSFS
device_remove_file(musb->controller, &dev_attr_mode);
device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
device_remove_file(musb->controller, &dev_attr_srp);
#endif
#endif
#ifdef CONFIG_SYSFS
device_remove_file(musb->controller, &dev_attr_mode);
device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
device_remove_file(musb->controller, &dev_attr_srp);
#endif
#endif
return platform_driver_probe(&musb_driver, musb_probe);
}
-/* make us init after usbcore and before usb
- * gadget and host-side drivers start to register
+/* make us init after usbcore and i2c (transceivers, regulators, etc)
+ * and before usb gadget and host-side drivers start to register
*/
-subsys_initcall(musb_init);
+fs_initcall(musb_init);
static void __exit musb_cleanup(void)
{
struct usb_request *request = &req->request;
struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
void __iomem *epio = musb->endpoints[epnum].regs;
- u16 fifo_count = 0;
+ unsigned fifo_count = 0;
u16 len = musb_ep->packet_sz;
csr = musb_readw(epio, MUSB_RXCSR);
len, fifo_count,
musb_ep->packet_sz);
- fifo_count = min(len, fifo_count);
+ fifo_count = min_t(unsigned, len, fifo_count);
#ifdef CONFIG_USB_TUSB_OMAP_DMA
if (tusb_dma_omap() && musb_ep->dma) {
static struct musb_qh *
musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
{
- int is_in;
struct musb_hw_ep *ep = qh->hw_ep;
struct musb *musb = ep->musb;
+ int is_in = usb_pipein(urb->pipe);
int ready = qh->is_ready;
- if (ep->is_shared_fifo)
- is_in = 1;
- else
- is_in = usb_pipein(urb->pipe);
-
/* save toggle eagerly, for paranoia */
switch (qh->type) {
case USB_ENDPOINT_XFER_BULK:
else
qh = musb_giveback(qh, urb, urb->status);
- if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+ if (qh != NULL && qh->is_ready) {
DBG(4, "... next ep%d %cX urb %p\n",
hw_ep->epnum, is_in ? 'R' : 'T',
next_urb(qh));
switch (musb->ep0_stage) {
case MUSB_EP0_IN:
fifo_dest = urb->transfer_buffer + urb->actual_length;
- fifo_count = min(len, ((u16) (urb->transfer_buffer_length
- - urb->actual_length)));
+ fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+ urb->actual_length);
if (fifo_count < len)
urb->status = -EOVERFLOW;
}
/* FALLTHROUGH */
case MUSB_EP0_OUT:
- fifo_count = min(qh->maxpacket, ((u16)
- (urb->transfer_buffer_length
- - urb->actual_length)));
-
+ fifo_count = min_t(size_t, qh->maxpacket,
+ urb->transfer_buffer_length -
+ urb->actual_length);
if (fifo_count) {
fifo_dest = (u8 *) (urb->transfer_buffer
+ urb->actual_length);
struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
- struct musb_qh *qh = hw_ep->out_qh;
+ struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
+ : hw_ep->out_qh;
u32 status = 0;
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
* packets before updating TXCSR ... other docs disagree ...
*/
/* PIO: start next packet in this URB */
- wLength = min(qh->maxpacket, (u16) wLength);
+ if (wLength > qh->maxpacket)
+ wLength = qh->maxpacket;
musb_write_fifo(hw_ep, wLength, buf);
qh->segsize = wLength;
}
qh->type_reg = type_reg;
- /* precompute rxinterval/txinterval register */
- interval = min((u8)16, epd->bInterval); /* log encoding */
+ /* Precompute RXINTERVAL/TXINTERVAL register */
switch (qh->type) {
case USB_ENDPOINT_XFER_INT:
- /* fullspeed uses linear encoding */
- if (USB_SPEED_FULL == urb->dev->speed) {
- interval = epd->bInterval;
- if (!interval)
- interval = 1;
+ /*
+ * Full/low speeds use the linear encoding,
+ * high speed uses the logarithmic encoding.
+ */
+ if (urb->dev->speed <= USB_SPEED_FULL) {
+ interval = max_t(u8, epd->bInterval, 1);
+ break;
}
/* FALLTHROUGH */
case USB_ENDPOINT_XFER_ISOC:
- /* iso always uses log encoding */
+ /* ISO always uses logarithmic encoding */
+ interval = min_t(u8, epd->bInterval, 16);
break;
default:
/* REVISIT we actually want to use NAK limits, hinting to the
goto done;
/* Any URB not actively programmed into endpoint hardware can be
- * immediately given back. Such an URB must be at the head of its
+ * immediately given back; that's any URB not at the head of an
* endpoint queue, unless someday we get real DMA queues. And even
- * then, it might not be known to the hardware...
+ * if it's at the head, it might not be known to the hardware...
*
* Otherwise abort current transfer, pending dma, etc.; urb->status
* has already been updated. This is a synchronous abort; it'd be
qh->is_ready = 0;
__musb_giveback(musb, urb, 0);
qh->is_ready = ready;
+
+ /* If nothing else (usually musb_giveback) is using it
+ * and its URB list has emptied, recycle this qh.
+ */
+ if (ready && list_empty(&qh->hep->urb_list)) {
+ qh->hep->hcpriv = NULL;
+ list_del(&qh->ring);
+ kfree(qh);
+ }
} else
ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
done:
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
u8 is_in = epnum & USB_DIR_IN;
- struct musb_qh *qh = hep->hcpriv;
- struct urb *urb, *tmp;
+ struct musb_qh *qh;
+ struct urb *urb;
struct list_head *sched;
- if (!qh)
- return;
-
spin_lock_irqsave(&musb->lock, flags);
+ qh = hep->hcpriv;
+ if (qh == NULL)
+ goto exit;
+
switch (qh->type) {
case USB_ENDPOINT_XFER_CONTROL:
sched = &musb->control;
/* cleanup */
musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
- } else
- urb = NULL;
- /* then just nuke all the others */
- list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
- musb_giveback(qh, urb, -ESHUTDOWN);
+ /* Then nuke all the others ... and advance the
+ * queue on hw_ep (e.g. bulk ring) when we're done.
+ */
+ while (!list_empty(&hep->urb_list)) {
+ urb = next_urb(qh);
+ urb->status = -ESHUTDOWN;
+ musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+ }
+ } else {
+ /* Just empty the queue; the hardware is busy with
+ * other transfers, and since !qh->is_ready nothing
+ * will activate any of these as it advances.
+ */
+ while (!list_empty(&hep->urb_list))
+ __musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
+ hep->hcpriv = NULL;
+ list_del(&qh->ring);
+ kfree(qh);
+ }
+exit:
spin_unlock_irqrestore(&musb->lock, flags);
}
/* Ericsson products */
#define ERICSSON_VENDOR_ID 0x0bdb
-#define ERICSSON_PRODUCT_F3507G 0x1900
+#define ERICSSON_PRODUCT_F3507G_1 0x1900
+#define ERICSSON_PRODUCT_F3507G_2 0x1902
+
+#define BENQ_VENDOR_ID 0x04a5
+#define BENQ_PRODUCT_H10 0x4068
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
- { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
+ { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) },
+ { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) },
+ { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+ { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
"Genesys Logic",
"USB to IDE Optical",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+ US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
"Genesys Logic",
"USB to IDE Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+ US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
/* Reported by Ben Efros <ben@pc-doctor.com> */
UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
* Initialisation
*/
-#ifdef CONFIG_PPC_PMAC
+#ifdef CONFIG_PPC_PMAC__disabled
static void aty128_early_resume(void *data)
{
struct aty128fb_par *par = data;
if (try_acquire_console_sem())
return;
+ pci_restore_state(par->pdev);
aty128_do_resume(par->pdev);
release_console_sem();
}
/* Indicate sleep capability */
if (par->chip_gen == rage_M3) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+ * others we now rely on the PCI core restoring the config space for us, which
+ * isn't the case with that hack, and that code path causes various things to
+ * be called with interrupts off while they shouldn't. I'm leaving the code in
+ * as it can be useful for debugging purposes
+ */
pmac_set_early_video_resume(aty128_early_resume, par);
+#endif
}
/* Find default mode */
return rc;
}
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_OF__disabled
static void radeonfb_early_resume(void *data)
{
struct radeonfb_info *rinfo = data;
rinfo->no_schedule = 1;
+ pci_restore_state(rinfo->pdev);
radeonfb_pci_resume(rinfo->pdev);
rinfo->no_schedule = 0;
}
*/
if (rinfo->pm_mode != radeon_pm_none) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+ * others we now rely on the PCI core restoring the config space for us, which
+ * isn't the case with that hack, and that code path causes various things to
+ * be called with interrupts off while they shouldn't. I'm leaving the code in
+ * as it can be useful for debugging purposes
+ */
pmac_set_early_video_resume(radeonfb_early_resume, rinfo);
+#endif
}
#if 0
struct i810fb_par *par = info->par;
int line_length, vidmem, mode_valid = 0, retval = 0;
u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
+
/*
* Memory limit
*/
if (vidmem > par->fb.size) {
vyres = par->fb.size/line_length;
if (vyres < var->yres) {
- vyres = yres;
+ vyres = info->var.yres;
vxres = par->fb.size/vyres;
vxres /= var->bits_per_pixel >> 3;
line_length = get_line_length(par, vxres,
var->bits_per_pixel);
- vidmem = line_length * yres;
+ vidmem = line_length * info->var.yres;
if (vxres < var->xres) {
printk("i810fb: required video memory, "
"%d bytes, for %dx%d-%d (virtual) "
static struct platform_driver pxafb_driver = {
.probe = pxafb_probe,
- .remove = pxafb_remove,
+ .remove = __devexit_p(pxafb_remove),
.suspend = pxafb_suspend,
.resume = pxafb_resume,
.driver = {
{
struct sh_mobile_lcdc_chan *ch;
struct sh_mobile_lcdc_board_cfg *board_cfg;
- unsigned long tmp;
int k;
/* tell the board code to disable the panel */
if (board_cfg->display_off)
board_cfg->display_off(board_cfg->board_data);
- /* cleanup deferred io if SYS bus */
- tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
- if (ch->ldmt1r_value & (1 << 12) && tmp) {
+ /* cleanup deferred io if enabled */
+ if (ch->info.fbdefio) {
fb_deferred_io_cleanup(&ch->info);
ch->info.fbdefio = NULL;
}
{
struct w1_gpio_platform_data *pdata = data;
- return gpio_get_value(pdata->pin);
+ return gpio_get_value(pdata->pin) ? 1 : 0;
}
static int __init w1_gpio_probe(struct platform_device *pdev)
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
+config W1_SLAVE_DS2431
+ tristate "1kb EEPROM family support (DS2431)"
+ help
+ Say Y here if you want to use a 1-wire
+ 1kb EEPROM family device (DS2431)
+
config W1_SLAVE_DS2433
tristate "4kb EEPROM family support (DS2433)"
help
obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o
obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o
+obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
*/
static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
{
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+ struct w1_f23_data *f23 = sl->family_data;
+#endif
u8 wrbuf[4];
u8 rdbuf[W1_PAGE_SIZE + 3];
u8 es = (addr + len - 1) & 0x1f;
/* Reset the bus to wake up the EEPROM (this may not be needed) */
w1_reset_bus(sl->master);
-
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+ f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
+#endif
return 0;
}
bus_clk = 133; /* in MHz */
freq = fsl_get_sys_freq();
- if (freq > 0)
+ if (freq != -1)
bus_clk = freq;
/* Map devices registers into memory */
#include <linux/watchdog.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <mach/timex.h>
#include <mach/regs-timer.h>
#define WDT_DEFAULT_TIME 5 /* seconds */
#define WDT_EN 0x0010
#define WDT_VAL (TIMER_VIRT_BASE + 0x0024)
+#define ORION5X_TCLK 166666667
#define WDT_MAX_DURATION (0xffffffff / ORION5X_TCLK)
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
#include <asm/time.h>
#include <asm/mach-rc32434/integ.h>
-#define MAX_TIMEOUT 20
-#define RC32434_WDT_INTERVAL (15 * HZ)
-
-#define VERSION "0.2"
+#define VERSION "0.4"
static struct {
- struct completion stop;
- int running;
- struct timer_list timer;
- int queue;
- int default_ticks;
unsigned long inuse;
} rc32434_wdt_device;
static struct integ __iomem *wdt_reg;
-static int ticks = 100 * HZ;
static int expect_close;
-static int timeout;
+
+/* Board internal clock speed in Hz,
+ * the watchdog timer ticks at. */
+extern unsigned int idt_cpu_freq;
+
+/* translate wtcompare value to seconds and vice versa */
+#define WTCOMP2SEC(x) (x / idt_cpu_freq)
+#define SEC2WTCOMP(x) (x * idt_cpu_freq)
+
+/* Use a default timeout of 20s. This should be
+ * safe for CPU clock speeds up to 400MHz, as
+ * ((2 ^ 32) - 1) / (400MHz / 2) = 21s. */
+#define WATCHDOG_TIMEOUT 20
+
+static int timeout = WATCHDOG_TIMEOUT;
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+/* apply or and nand masks to data read from addr and write back */
+#define SET_BITS(addr, or, nand) \
+ writel((readl(&addr) | or) & ~nand, &addr)
static void rc32434_wdt_start(void)
{
- u32 val;
-
- if (!rc32434_wdt_device.inuse) {
- writel(0, &wdt_reg->wtcount);
+ u32 or, nand;
- val = RC32434_ERR_WRE;
- writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+ /* zero the counter before enabling */
+ writel(0, &wdt_reg->wtcount);
- val = RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
- }
- rc32434_wdt_device.running++;
-}
+ /* don't generate a non-maskable interrupt,
+ * do a warm reset instead */
+ nand = 1 << RC32434_ERR_WNE;
+ or = 1 << RC32434_ERR_WRE;
-static void rc32434_wdt_stop(void)
-{
- u32 val;
+ /* reset the ERRCS timeout bit in case it's set */
+ nand |= 1 << RC32434_ERR_WTO;
- if (rc32434_wdt_device.running) {
+ SET_BITS(wdt_reg->errcs, or, nand);
- val = ~RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+ /* reset WTC timeout bit and enable WDT */
+ nand = 1 << RC32434_WTC_TO;
+ or = 1 << RC32434_WTC_EN;
- val = ~RC32434_ERR_WRE;
- writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
+ SET_BITS(wdt_reg->wtc, or, nand);
+}
- rc32434_wdt_device.running = 0;
- }
+static void rc32434_wdt_stop(void)
+{
+ /* Disable WDT */
+ SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
}
-static void rc32434_wdt_set(int new_timeout)
+static int rc32434_wdt_set(int new_timeout)
{
- u32 cmp = new_timeout * HZ;
- u32 state, val;
+ int max_to = WTCOMP2SEC((u32)-1);
+ if (new_timeout < 0 || new_timeout > max_to) {
+ printk(KERN_ERR KBUILD_MODNAME
+ ": timeout value must be between 0 and %d",
+ max_to);
+ return -EINVAL;
+ }
timeout = new_timeout;
- /*
- * store and disable WTC
- */
- state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
- val = ~RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
-
- writel(0, &wdt_reg->wtcount);
- writel(cmp, &wdt_reg->wtcompare);
-
- /*
- * restore WTC
- */
-
- writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
-}
+ writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
-static void rc32434_wdt_reset(void)
-{
- ticks = rc32434_wdt_device.default_ticks;
+ return 0;
}
-static void rc32434_wdt_update(unsigned long unused)
+static void rc32434_wdt_ping(void)
{
- if (rc32434_wdt_device.running)
- ticks--;
-
writel(0, &wdt_reg->wtcount);
-
- if (rc32434_wdt_device.queue && ticks)
- mod_timer(&rc32434_wdt_device.timer,
- jiffies + RC32434_WDT_INTERVAL);
- else
- complete(&rc32434_wdt_device.stop);
}
static int rc32434_wdt_open(struct inode *inode, struct file *file)
if (nowayout)
__module_get(THIS_MODULE);
+ rc32434_wdt_start();
+ rc32434_wdt_ping();
+
return nonseekable_open(inode, file);
}
static int rc32434_wdt_release(struct inode *inode, struct file *file)
{
- if (expect_close && nowayout == 0) {
+ if (expect_close == 42) {
rc32434_wdt_stop();
printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
module_put(THIS_MODULE);
- } else
+ } else {
printk(KERN_CRIT KBUILD_MODNAME
": device closed unexpectedly. WDT will not stop !\n");
-
+ rc32434_wdt_ping();
+ }
clear_bit(0, &rc32434_wdt_device.inuse);
return 0;
}
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
- expect_close = 1;
+ expect_close = 42;
}
}
- rc32434_wdt_update(0);
+ rc32434_wdt_ping();
return len;
}
return 0;
};
switch (cmd) {
case WDIOC_KEEPALIVE:
- rc32434_wdt_reset();
+ rc32434_wdt_ping();
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- value = readl(&wdt_reg->wtcount);
+ value = 0;
if (copy_to_user(argp, &value, sizeof(int)))
return -EFAULT;
break;
break;
case WDIOS_DISABLECARD:
rc32434_wdt_stop();
+ break;
default:
return -EINVAL;
}
case WDIOC_SETTIMEOUT:
if (copy_from_user(&new_timeout, argp, sizeof(int)))
return -EFAULT;
- if (new_timeout < 1)
+ if (rc32434_wdt_set(new_timeout))
return -EINVAL;
- if (new_timeout > MAX_TIMEOUT)
- return -EINVAL;
- rc32434_wdt_set(new_timeout);
+ /* Fall through */
case WDIOC_GETTIMEOUT:
return copy_to_user(argp, &timeout, sizeof(int));
default:
.fops = &rc32434_wdt_fops,
};
-static char banner[] = KERN_INFO KBUILD_MODNAME
+static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME
": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
-static int rc32434_wdt_probe(struct platform_device *pdev)
+static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
if (!r) {
printk(KERN_ERR KBUILD_MODNAME
"failed to retrieve resources\n");
}
ret = misc_register(&rc32434_wdt_miscdev);
-
if (ret < 0) {
printk(KERN_ERR KBUILD_MODNAME
"failed to register watchdog device\n");
goto unmap;
}
- init_completion(&rc32434_wdt_device.stop);
- rc32434_wdt_device.queue = 0;
-
- clear_bit(0, &rc32434_wdt_device.inuse);
-
- setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
-
- rc32434_wdt_device.default_ticks = ticks;
-
- rc32434_wdt_start();
-
printk(banner, timeout);
return 0;
return ret;
}
-static int rc32434_wdt_remove(struct platform_device *pdev)
+static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
{
- if (rc32434_wdt_device.queue) {
- rc32434_wdt_device.queue = 0;
- wait_for_completion(&rc32434_wdt_device.stop);
- }
misc_deregister(&rc32434_wdt_miscdev);
-
iounmap(wdt_reg);
-
return 0;
}
static struct platform_driver rc32434_wdt = {
.probe = rc32434_wdt_probe,
- .remove = rc32434_wdt_remove,
- .driver = {
+ .remove = __devexit_p(rc32434_wdt_remove),
+ .driver = {
.name = "rc32434_wdt",
}
};
# Do not add any filesystems before this line
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3
-obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4
+obj-$(CONFIG_EXT2_FS) += ext2/
+# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
+# unless explicitly requested by rootfstype
+obj-$(CONFIG_EXT4_FS) += ext4/
obj-$(CONFIG_JBD) += jbd/
obj-$(CONFIG_JBD2) += jbd2/
-obj-$(CONFIG_EXT2_FS) += ext2/
obj-$(CONFIG_CRAMFS) += cramfs/
obj-$(CONFIG_SQUASHFS) += squashfs/
obj-y += ramfs/
struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
{
struct bio *bio = NULL;
- void *p;
+ void *uninitialized_var(p);
if (bs) {
p = mempool_alloc(bs->bio_pool, gfp_mask);
*/
struct list_head delalloc_inodes;
+ /* the space_info for where this inode's data allocations are done */
+ struct btrfs_space_info *space_info;
+
/* full 64 bit generation number, struct vfs_inode doesn't have a big
* enough field for this.
*/
*/
u64 delalloc_bytes;
+ /* total number of bytes that may be used for this inode for
+ * delalloc
+ */
+ u64 reserved_bytes;
+
/*
* the size of the file stored in the metadata on disk. data=ordered
* means the in-memory i_size might be larger than the size on disk
if (*cow_ret == buf)
unlock_orig = 1;
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
if (parent)
parent_start = parent->start;
if (slot >= btrfs_header_nritems(upper) - 1)
return 1;
- WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+ btrfs_assert_tree_locked(path->nodes[1]);
right = read_node_slot(root, upper, slot + 1);
btrfs_tree_lock(right);
if (right_nritems == 0)
return 1;
- WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+ btrfs_assert_tree_locked(path->nodes[1]);
left = read_node_slot(root, path->nodes[1], slot - 1);
btrfs_tree_lock(left);
next = read_node_slot(root, c, slot);
if (!path->skip_locking) {
- WARN_ON(!btrfs_tree_locked(c));
+ btrfs_assert_tree_locked(c);
btrfs_tree_lock(next);
btrfs_set_lock_blocking(next);
}
reada_for_search(root, path, level, slot, 0);
next = read_node_slot(root, next, 0);
if (!path->skip_locking) {
- WARN_ON(!btrfs_tree_locked(path->nodes[level]));
+ btrfs_assert_tree_locked(path->nodes[level]);
btrfs_tree_lock(next);
btrfs_set_lock_blocking(next);
}
struct btrfs_space_info {
u64 flags;
- u64 total_bytes;
- u64 bytes_used;
- u64 bytes_pinned;
- u64 bytes_reserved;
- u64 bytes_readonly;
- int full;
- int force_alloc;
+
+ u64 total_bytes; /* total bytes in the space */
+ u64 bytes_used; /* total bytes used on disk */
+ u64 bytes_pinned; /* total bytes pinned, will be freed when the
+ transaction finishes */
+ u64 bytes_reserved; /* total bytes the allocator has reserved for
+ current allocations */
+ u64 bytes_readonly; /* total bytes that are read only */
+
+ /* delalloc accounting */
+ u64 bytes_delalloc; /* number of bytes reserved for allocation,
+ this space is not necessarily reserved yet
+ by the allocator */
+ u64 bytes_may_use; /* number of bytes that may be used for
+ delalloc */
+
+ int full; /* indicates that we cannot allocate any more
+ chunks for this space */
+ int force_alloc; /* set if we need to force a chunk alloc for
+ this space */
+
struct list_head list;
/* for block groups in our same type */
int btrfs_cleanup_reloc_trees(struct btrfs_root *root);
int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
+void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
+int btrfs_check_metadata_free_space(struct btrfs_root *root);
+int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes);
+void btrfs_free_reserved_data_space(struct btrfs_root *root,
+ struct inode *inode, u64 bytes);
+void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes);
+void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes);
/* ctree.c */
int btrfs_previous_item(struct btrfs_root *root,
struct btrfs_path *path, u64 min_objectid,
unsigned long btrfs_force_ra(struct address_space *mapping,
struct file_ra_state *ra, struct file *file,
pgoff_t offset, pgoff_t last_index);
-int btrfs_check_free_space(struct btrfs_root *root, u64 num_required,
- int for_del);
int btrfs_page_mkwrite(struct vm_area_struct *vma, struct page *page);
int btrfs_readpage(struct file *file, struct page *page);
void btrfs_delete_inode(struct inode *inode);
struct inode *btree_inode = root->fs_info->btree_inode;
if (btrfs_header_generation(buf) ==
root->fs_info->running_transaction->transid) {
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
/* ugh, clear_extent_buffer_dirty can be expensive */
btrfs_set_lock_blocking(buf);
btrfs_set_lock_blocking(buf);
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
if (transid != root->fs_info->generation) {
printk(KERN_CRIT "btrfs transid mismatch buffer %llu, "
"found %llu running %llu\n",
u64 bytenr, u64 num_bytes, int alloc,
int mark_free);
+static int do_chunk_alloc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *extent_root, u64 alloc_bytes,
+ u64 flags, int force);
+
static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
{
return (cache->flags & bits) == bits;
found->bytes_pinned = 0;
found->bytes_reserved = 0;
found->bytes_readonly = 0;
+ found->bytes_delalloc = 0;
found->full = 0;
found->force_alloc = 0;
*space_info = found;
return flags;
}
+static u64 btrfs_get_alloc_profile(struct btrfs_root *root, u64 data)
+{
+ struct btrfs_fs_info *info = root->fs_info;
+ u64 alloc_profile;
+
+ if (data) {
+ alloc_profile = info->avail_data_alloc_bits &
+ info->data_alloc_profile;
+ data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
+ } else if (root == root->fs_info->chunk_root) {
+ alloc_profile = info->avail_system_alloc_bits &
+ info->system_alloc_profile;
+ data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
+ } else {
+ alloc_profile = info->avail_metadata_alloc_bits &
+ info->metadata_alloc_profile;
+ data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
+ }
+
+ return btrfs_reduce_alloc_profile(root, data);
+}
+
+void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *inode)
+{
+ u64 alloc_target;
+
+ alloc_target = btrfs_get_alloc_profile(root, 1);
+ BTRFS_I(inode)->space_info = __find_space_info(root->fs_info,
+ alloc_target);
+}
+
+/*
+ * for now this just makes sure we have at least 5% of our metadata space free
+ * for use.
+ */
+int btrfs_check_metadata_free_space(struct btrfs_root *root)
+{
+ struct btrfs_fs_info *info = root->fs_info;
+ struct btrfs_space_info *meta_sinfo;
+ u64 alloc_target, thresh;
+ int committed = 0, ret;
+
+ /* get the space info for where the metadata will live */
+ alloc_target = btrfs_get_alloc_profile(root, 0);
+ meta_sinfo = __find_space_info(info, alloc_target);
+
+again:
+ spin_lock(&meta_sinfo->lock);
+ if (!meta_sinfo->full)
+ thresh = meta_sinfo->total_bytes * 80;
+ else
+ thresh = meta_sinfo->total_bytes * 95;
+
+ do_div(thresh, 100);
+
+ if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+ meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly > thresh) {
+ struct btrfs_trans_handle *trans;
+ if (!meta_sinfo->full) {
+ meta_sinfo->force_alloc = 1;
+ spin_unlock(&meta_sinfo->lock);
+
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+
+ ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+ 2 * 1024 * 1024, alloc_target, 0);
+ btrfs_end_transaction(trans, root);
+ goto again;
+ }
+ spin_unlock(&meta_sinfo->lock);
+
+ if (!committed) {
+ committed = 1;
+ trans = btrfs_join_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+ ret = btrfs_commit_transaction(trans, root);
+ if (ret)
+ return ret;
+ goto again;
+ }
+ return -ENOSPC;
+ }
+ spin_unlock(&meta_sinfo->lock);
+
+ return 0;
+}
+
+/*
+ * This will check the space that the inode allocates from to make sure we have
+ * enough space for bytes.
+ */
+int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes)
+{
+ struct btrfs_space_info *data_sinfo;
+ int ret = 0, committed = 0;
+
+ /* make sure bytes are sectorsize aligned */
+ bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+
+ data_sinfo = BTRFS_I(inode)->space_info;
+again:
+ /* make sure we have enough space to handle the data first */
+ spin_lock(&data_sinfo->lock);
+ if (data_sinfo->total_bytes - data_sinfo->bytes_used -
+ data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
+ data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
+ data_sinfo->bytes_may_use < bytes) {
+ struct btrfs_trans_handle *trans;
+
+ /*
+ * if we don't have enough free bytes in this space then we need
+ * to alloc a new chunk.
+ */
+ if (!data_sinfo->full) {
+ u64 alloc_target;
+
+ data_sinfo->force_alloc = 1;
+ spin_unlock(&data_sinfo->lock);
+
+ alloc_target = btrfs_get_alloc_profile(root, 1);
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+
+ ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+ bytes + 2 * 1024 * 1024,
+ alloc_target, 0);
+ btrfs_end_transaction(trans, root);
+ if (ret)
+ return ret;
+ goto again;
+ }
+ spin_unlock(&data_sinfo->lock);
+
+ /* commit the current transaction and try again */
+ if (!committed) {
+ committed = 1;
+ trans = btrfs_join_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+ ret = btrfs_commit_transaction(trans, root);
+ if (ret)
+ return ret;
+ goto again;
+ }
+
+ printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
+ ", %llu bytes_used, %llu bytes_reserved, "
+ "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
+ "%llu total\n", bytes, data_sinfo->bytes_delalloc,
+ data_sinfo->bytes_used, data_sinfo->bytes_reserved,
+ data_sinfo->bytes_pinned, data_sinfo->bytes_readonly,
+ data_sinfo->bytes_may_use, data_sinfo->total_bytes);
+ return -ENOSPC;
+ }
+ data_sinfo->bytes_may_use += bytes;
+ BTRFS_I(inode)->reserved_bytes += bytes;
+ spin_unlock(&data_sinfo->lock);
+
+ return btrfs_check_metadata_free_space(root);
+}
+
+/*
+ * if there was an error for whatever reason after calling
+ * btrfs_check_data_free_space, call this so we can cleanup the counters.
+ */
+void btrfs_free_reserved_data_space(struct btrfs_root *root,
+ struct inode *inode, u64 bytes)
+{
+ struct btrfs_space_info *data_sinfo;
+
+ /* make sure bytes are sectorsize aligned */
+ bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+
+ data_sinfo = BTRFS_I(inode)->space_info;
+ spin_lock(&data_sinfo->lock);
+ data_sinfo->bytes_may_use -= bytes;
+ BTRFS_I(inode)->reserved_bytes -= bytes;
+ spin_unlock(&data_sinfo->lock);
+}
+
+/* called when we are adding a delalloc extent to the inode's io_tree */
+void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes)
+{
+ struct btrfs_space_info *data_sinfo;
+
+ /* get the space info for where this inode will be storing its data */
+ data_sinfo = BTRFS_I(inode)->space_info;
+
+ /* make sure we have enough space to handle the data first */
+ spin_lock(&data_sinfo->lock);
+ data_sinfo->bytes_delalloc += bytes;
+
+ /*
+ * we are adding a delalloc extent without calling
+ * btrfs_check_data_free_space first. This happens on a weird
+ * writepage condition, but shouldn't hurt our accounting
+ */
+ if (unlikely(bytes > BTRFS_I(inode)->reserved_bytes)) {
+ data_sinfo->bytes_may_use -= BTRFS_I(inode)->reserved_bytes;
+ BTRFS_I(inode)->reserved_bytes = 0;
+ } else {
+ data_sinfo->bytes_may_use -= bytes;
+ BTRFS_I(inode)->reserved_bytes -= bytes;
+ }
+
+ spin_unlock(&data_sinfo->lock);
+}
+
+/* called when we are clearing an delalloc extent from the inode's io_tree */
+void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes)
+{
+ struct btrfs_space_info *info;
+
+ info = BTRFS_I(inode)->space_info;
+
+ spin_lock(&info->lock);
+ info->bytes_delalloc -= bytes;
+ spin_unlock(&info->lock);
+}
+
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force)
(unsigned long long)(info->total_bytes - info->bytes_used -
info->bytes_pinned - info->bytes_reserved),
(info->full) ? "" : "not ");
+ printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
+ " may_use=%llu, used=%llu\n", info->total_bytes,
+ info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use,
+ info->bytes_used);
down_read(&info->groups_sem);
list_for_each_entry(cache, &info->block_groups, list) {
{
int ret;
u64 search_start = 0;
- u64 alloc_profile;
struct btrfs_fs_info *info = root->fs_info;
- if (data) {
- alloc_profile = info->avail_data_alloc_bits &
- info->data_alloc_profile;
- data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
- } else if (root == root->fs_info->chunk_root) {
- alloc_profile = info->avail_system_alloc_bits &
- info->system_alloc_profile;
- data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
- } else {
- alloc_profile = info->avail_metadata_alloc_bits &
- info->metadata_alloc_profile;
- data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
- }
+ data = btrfs_get_alloc_profile(root, data);
again:
- data = btrfs_reduce_alloc_profile(root, data);
/*
* the only place that sets empty_size is btrfs_realloc_node, which
* is not called recursively on allocations
path = btrfs_alloc_path();
BUG_ON(!path);
- BUG_ON(!btrfs_tree_locked(parent));
+ btrfs_assert_tree_locked(parent);
parent_level = btrfs_header_level(parent);
extent_buffer_get(parent);
path->nodes[parent_level] = parent;
path->slots[parent_level] = btrfs_header_nritems(parent);
- BUG_ON(!btrfs_tree_locked(node));
+ btrfs_assert_tree_locked(node);
level = btrfs_header_level(node);
extent_buffer_get(node);
path->nodes[level] = node;
WARN_ON(num_pages > nrptrs);
memset(pages, 0, sizeof(struct page *) * nrptrs);
- ret = btrfs_check_free_space(root, write_bytes, 0);
+ ret = btrfs_check_data_free_space(root, inode, write_bytes);
if (ret)
goto out;
ret = prepare_pages(root, file, pages, num_pages,
pos, first_index, last_index,
write_bytes);
- if (ret)
+ if (ret) {
+ btrfs_free_reserved_data_space(root, inode,
+ write_bytes);
goto out;
+ }
ret = btrfs_copy_from_user(pos, num_pages,
write_bytes, pages, buf);
if (ret) {
+ btrfs_free_reserved_data_space(root, inode,
+ write_bytes);
btrfs_drop_pages(pages, num_pages);
goto out;
}
ret = dirty_and_release_pages(NULL, root, file, pages,
num_pages, pos, write_bytes);
btrfs_drop_pages(pages, num_pages);
- if (ret)
+ if (ret) {
+ btrfs_free_reserved_data_space(root, inode,
+ write_bytes);
goto out;
+ }
if (will_write) {
btrfs_fdatawrite_range(inode->i_mapping, pos,
}
out:
mutex_unlock(&inode->i_mutex);
+ if (ret)
+ err = ret;
out_nolock:
kfree(pages);
return err;
}
-/*
- * a very lame attempt at stopping writes when the FS is 85% full. There
- * are countless ways this is incorrect, but it is better than nothing.
- */
-int btrfs_check_free_space(struct btrfs_root *root, u64 num_required,
- int for_del)
-{
- u64 total;
- u64 used;
- u64 thresh;
- int ret = 0;
-
- spin_lock(&root->fs_info->delalloc_lock);
- total = btrfs_super_total_bytes(&root->fs_info->super_copy);
- used = btrfs_super_bytes_used(&root->fs_info->super_copy);
- if (for_del)
- thresh = total * 90;
- else
- thresh = total * 85;
-
- do_div(thresh, 100);
-
- if (used + root->fs_info->delalloc_bytes + num_required > thresh)
- ret = -ENOSPC;
- spin_unlock(&root->fs_info->delalloc_lock);
- return ret;
-}
-
/*
* this does all the hard work for inserting an inline extent into
* the btree. The caller should have done a btrfs_drop_extents so that
*/
if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
struct btrfs_root *root = BTRFS_I(inode)->root;
+ btrfs_delalloc_reserve_space(root, inode, end - start + 1);
spin_lock(&root->fs_info->delalloc_lock);
BTRFS_I(inode)->delalloc_bytes += end - start + 1;
root->fs_info->delalloc_bytes += end - start + 1;
(unsigned long long)end - start + 1,
(unsigned long long)
root->fs_info->delalloc_bytes);
+ btrfs_delalloc_free_space(root, inode, (u64)-1);
root->fs_info->delalloc_bytes = 0;
BTRFS_I(inode)->delalloc_bytes = 0;
} else {
+ btrfs_delalloc_free_space(root, inode,
+ end - start + 1);
root->fs_info->delalloc_bytes -= end - start + 1;
BTRFS_I(inode)->delalloc_bytes -= end - start + 1;
}
root = BTRFS_I(dir)->root;
- ret = btrfs_check_free_space(root, 1, 1);
- if (ret)
- goto fail;
-
trans = btrfs_start_transaction(root, 1);
btrfs_set_trans_block_group(trans, dir);
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
-fail:
btrfs_btree_balance_dirty(root, nr);
return ret;
}
return -ENOTEMPTY;
}
- ret = btrfs_check_free_space(root, 1, 1);
- if (ret)
- goto fail;
-
trans = btrfs_start_transaction(root, 1);
btrfs_set_trans_block_group(trans, dir);
fail_trans:
nr = trans->blocks_used;
ret = btrfs_end_transaction_throttle(trans, root);
-fail:
btrfs_btree_balance_dirty(root, nr);
if (ret && !err)
if (size <= hole_start)
return 0;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
return err;
bi->last_trans = 0;
bi->logged_trans = 0;
bi->delalloc_bytes = 0;
+ bi->reserved_bytes = 0;
bi->disk_i_size = 0;
bi->flags = 0;
bi->index_cnt = (u64)-1;
inode->i_ino = args->ino;
init_btrfs_i(inode);
BTRFS_I(inode)->root = args->root;
+ btrfs_set_inode_space_info(args->root, inode);
return 0;
}
BTRFS_I(inode)->index_cnt = 2;
BTRFS_I(inode)->root = root;
BTRFS_I(inode)->generation = trans->transid;
+ btrfs_set_inode_space_info(root, inode);
if (mode & S_IFDIR)
owner = 0;
if (!new_valid_dev(rdev))
return -EINVAL;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto fail;
u64 objectid;
u64 index = 0;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto fail;
trans = btrfs_start_transaction(root, 1);
return -ENOENT;
btrfs_inc_nlink(inode);
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto fail;
err = btrfs_set_inode_index(dir, &index);
u64 index = 0;
unsigned long nr = 1;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto out_unlock;
u64 page_start;
u64 page_end;
- ret = btrfs_check_free_space(root, PAGE_CACHE_SIZE, 0);
+ ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
if (ret)
goto out;
if ((page->mapping != inode->i_mapping) ||
(page_start >= size)) {
+ btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
/* page got truncated out from underneath us */
goto out_unlock;
}
if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
return -EXDEV;
- ret = btrfs_check_free_space(root, 1, 0);
+ ret = btrfs_check_metadata_free_space(root);
if (ret)
goto out_unlock;
if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root))
return -ENAMETOOLONG;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto out_fail;
u64 index = 0;
unsigned long nr = 1;
- ret = btrfs_check_free_space(root, 1, 0);
+ ret = btrfs_check_metadata_free_space(root);
if (ret)
goto fail_commit;
if (!root->ref_cows)
return -EINVAL;
- ret = btrfs_check_free_space(root, 1, 0);
+ ret = btrfs_check_metadata_free_space(root);
if (ret)
goto fail_unlock;
unsigned long i;
int ret;
- ret = btrfs_check_free_space(root, inode->i_size, 0);
+ ret = btrfs_check_data_free_space(root, inode, inode->i_size);
if (ret)
return -ENOSPC;
return 0;
}
-int btrfs_tree_locked(struct extent_buffer *eb)
+void btrfs_assert_tree_locked(struct extent_buffer *eb)
{
- return test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags) ||
- spin_is_locked(&eb->lock);
+ if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+ assert_spin_locked(&eb->lock);
}
int btrfs_tree_lock(struct extent_buffer *eb);
int btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_tree_locked(struct extent_buffer *eb);
int btrfs_try_tree_lock(struct extent_buffer *eb);
int btrfs_try_spin_lock(struct extent_buffer *eb);
void btrfs_set_lock_blocking(struct extent_buffer *eb);
void btrfs_clear_lock_blocking(struct extent_buffer *eb);
+void btrfs_assert_tree_locked(struct extent_buffer *eb);
#endif
/* 0x00 */
COMPATIBLE_IOCTL(FIBMAP)
COMPATIBLE_IOCTL(FIGETBSZ)
+/* 'X' - originally XFS but some now in the VFS */
+COMPATIBLE_IOCTL(FIFREEZE)
+COMPATIBLE_IOCTL(FITHAW)
/* RAID */
COMPATIBLE_IOCTL(RAID_VERSION)
COMPATIBLE_IOCTL(GET_ARRAY_INFO)
iput(inode);
return res;
}
-EXPORT_SYMBOL_GPL(d_obtain_alias);
+EXPORT_SYMBOL(d_obtain_alias);
/**
* d_splice_alias - splice a disconnected dentry into the tree if one exists
fsi->ptmx_dentry = dentry;
rc = 0;
-
- printk(KERN_DEBUG "Created ptmx node in devpts ino %lu\n",
- inode->i_ino);
out:
mutex_unlock(&root->d_inode->i_mutex);
return rc;
struct pts_fs_info *fsi;
struct pts_mount_opts *opts;
- printk(KERN_NOTICE "devpts: newinstance mount\n");
-
err = get_sb_nodev(fs_type, flags, data, devpts_fill_super, mnt);
if (err)
return err;
*/
int ext4_should_retry_alloc(struct super_block *sb, int *retries)
{
- if (!ext4_has_free_blocks(EXT4_SB(sb), 1) || (*retries)++ > 3)
+ if (!ext4_has_free_blocks(EXT4_SB(sb), 1) ||
+ (*retries)++ > 3 ||
+ !EXT4_SB(sb)->s_journal)
return 0;
jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id);
struct ext4_group_desc *gdp;
struct ext4_super_block *es;
struct ext4_sb_info *sbi;
- int fatal = 0, err, count;
+ int fatal = 0, err, count, cleared;
ext4_group_t flex_group;
if (atomic_read(&inode->i_count) > 1) {
goto error_return;
/* Ok, now we can actually update the inode bitmaps.. */
- if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group),
- bit, bitmap_bh->b_data))
+ spin_lock(sb_bgl_lock(sbi, block_group));
+ cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
+ spin_unlock(sb_bgl_lock(sbi, block_group));
+ if (!cleared)
ext4_error(sb, "ext4_free_inode",
"bit already cleared for inode %lu", ino);
else {
if (sbi->s_log_groups_per_flex) {
ret2 = find_group_flex(sb, dir, &group);
+ if (ret2 == -1) {
+ ret2 = find_group_other(sb, dir, &group);
+ if (ret2 == 0 && printk_ratelimit())
+ printk(KERN_NOTICE "ext4: find_group_flex "
+ "failed, fallback succeeded dir %lu\n",
+ dir->i_ino);
+ }
goto got_group;
}
goto out;
}
+ /* We cannot recurse into the filesystem as the transaction is already
+ * started */
+ flags |= AOP_FLAG_NOFS;
+
page = grab_cache_page_write_begin(mapping, index, flags);
if (!page) {
ext4_journal_stop(handle);
*pagep = page;
ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ext4_get_block);
+ ext4_get_block);
if (!ret && ext4_should_journal_data(inode)) {
ret = walk_page_buffers(handle, page_buffers(page),
ext4_journal_stop(handle);
- if (mpd.retval == -ENOSPC) {
+ if ((mpd.retval == -ENOSPC) && sbi->s_journal) {
/* commit the transaction which would
* free blocks released in the transaction
* and try again
ret = PTR_ERR(handle);
goto out;
}
+ /* We cannot recurse into the filesystem as the transaction is already
+ * started */
+ flags |= AOP_FLAG_NOFS;
page = grab_cache_page_write_begin(mapping, index, flags);
if (!page) {
/* Journal blocked and flushed, clear needs_recovery flag. */
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
- ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
error = ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
if (error)
goto out;
sector_t blocknr;
/* fat_get_cluster() assumes the requested blocknr isn't truncated. */
- mutex_lock(&mapping->host->i_mutex);
+ down_read(&mapping->host->i_alloc_sem);
blocknr = generic_block_bmap(mapping, block, fat_get_block);
- mutex_unlock(&mapping->host->i_mutex);
+ up_read(&mapping->host->i_alloc_sem);
return blocknr;
}
int ret;
BUG_ON(inode->i_state & I_SYNC);
+ WARN_ON(inode->i_state & I_NEW);
/* Set I_SYNC, reset I_DIRTY */
dirty = inode->i_state & I_DIRTY;
}
spin_lock(&inode_lock);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state &= ~I_SYNC;
if (!(inode->i_state & I_FREEING)) {
if (!(inode->i_state & I_DIRTY) &&
break;
}
+ if (inode->i_state & I_NEW) {
+ requeue_io(inode);
+ continue;
+ }
+
if (wbc->nonblocking && bdi_write_congested(bdi)) {
wbc->encountered_congestion = 1;
if (!sb_is_blkdev_sb(sb))
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
struct address_space *mapping;
- if (inode->i_state & (I_FREEING|I_WILL_FREE))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
mapping = inode->i_mapping;
if (mapping->nrpages == 0)
invalidate_inode_buffers(inode);
if (!atomic_read(&inode->i_count)) {
list_move(&inode->i_list, dispose);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_FREEING;
count++;
continue;
continue;
}
list_move(&inode->i_list, &freeable);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_FREEING;
nr_pruned++;
}
* just created it (so there can be no old holders
* that haven't tested I_LOCK).
*/
+ WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW));
inode->i_state &= ~(I_LOCK|I_NEW);
wake_up_inode(inode);
}
list_del_init(&inode->i_list);
list_del_init(&inode->i_sb_list);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_FREEING;
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
spin_unlock(&inode_lock);
return;
}
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_WILL_FREE;
spin_unlock(&inode_lock);
write_inode_now(inode, 1);
spin_lock(&inode_lock);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state &= ~I_WILL_FREE;
inodes_stat.nr_unused--;
hlist_del_init(&inode->i_hash);
}
list_del_init(&inode->i_list);
list_del_init(&inode->i_sb_list);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_FREEING;
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
spin_unlock(&c->erase_completion_lock);
- /* This thread is purely an optimisation. But if it runs when
- other things could be running, it actually makes things a
- lot worse. Use yield() and put it at the back of the runqueue
- every time. Especially during boot, pulling an inode in
- with read_inode() is much preferable to having the GC thread
- get there first. */
- yield();
+ /* Problem - immediately after bootup, the GCD spends a lot
+ * of time in places like jffs2_kill_fragtree(); so much so
+ * that userspace processes (like gdm and X) are starved
+ * despite plenty of cond_resched()s and renicing. Yield()
+ * doesn't help, either (presumably because userspace and GCD
+ * are generally competing for a higher latency resource -
+ * disk).
+ * This forces the GCD to slow the hell down. Pulling an
+ * inode in with read_inode() is much preferable to having
+ * the GC thread get there first. */
+ schedule_timeout_interruptible(msecs_to_jiffies(50));
/* Put_super will send a SIGKILL and then wait on the sem.
*/
struct jffs2_tmp_dnode_info *tn)
{
uint32_t fn_end = tn->fn->ofs + tn->fn->size;
- struct jffs2_tmp_dnode_info *this;
+ struct jffs2_tmp_dnode_info *this, *ptn;
dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw));
if (this) {
/* If the node is coincident with another at a lower address,
back up until the other node is found. It may be relevant */
- while (this->overlapped)
- this = tn_prev(this);
-
- /* First node should never be marked overlapped */
- BUG_ON(!this);
+ while (this->overlapped) {
+ ptn = tn_prev(this);
+ if (!ptn) {
+ /*
+ * We killed a node which set the overlapped
+ * flags during the scan. Fix it up.
+ */
+ this->overlapped = 0;
+ break;
+ }
+ this = ptn;
+ }
dbg_readinode("'this' found %#04x-%#04x (%s)\n", this->fn->ofs, this->fn->ofs + this->fn->size, this->fn ? "data" : "hole");
}
}
if (!this->overlapped)
break;
- this = tn_prev(this);
+
+ ptn = tn_prev(this);
+ if (!ptn) {
+ /*
+ * We killed a node which set the overlapped
+ * flags during the scan. Fix it up.
+ */
+ this->overlapped = 0;
+ break;
+ }
+ this = ptn;
}
}
eat_last(&rii->tn_root, &last->rb);
ver_insert(&ver_root, last);
- if (unlikely(last->overlapped))
- continue;
+ if (unlikely(last->overlapped)) {
+ if (pen)
+ continue;
+ /*
+ * We killed a node which set the overlapped
+ * flags during the scan. Fix it up.
+ */
+ last->overlapped = 0;
+ }
/* Now we have a bunch of nodes in reverse version
order, in the tree at ver_root. Most of the time,
return ret;
}
+static int ocfs2_replace_extent_rec(struct inode *inode,
+ handle_t *handle,
+ struct ocfs2_path *path,
+ struct ocfs2_extent_list *el,
+ int split_index,
+ struct ocfs2_extent_rec *split_rec)
+{
+ int ret;
+
+ ret = ocfs2_path_bh_journal_access(handle, inode, path,
+ path_num_items(path) - 1);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ el->l_recs[split_index] = *split_rec;
+
+ ocfs2_journal_dirty(handle, path_leaf_bh(path));
+out:
+ return ret;
+}
+
/*
* Mark part or all of the extent record at split_index in the leaf
* pointed to by path as written. This removes the unwritten
if (ctxt.c_contig_type == CONTIG_NONE) {
if (ctxt.c_split_covers_rec)
- el->l_recs[split_index] = *split_rec;
+ ret = ocfs2_replace_extent_rec(inode, handle,
+ path, el,
+ split_index, split_rec);
else
ret = ocfs2_split_and_insert(inode, handle, path, et,
&last_eb_bh, split_index,
if (!mle) {
if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN &&
res->owner != assert->node_idx) {
- mlog(ML_ERROR, "assert_master from "
- "%u, but current owner is "
- "%u! (%.*s)\n",
- assert->node_idx, res->owner,
- namelen, name);
- goto kill;
+ mlog(ML_ERROR, "DIE! Mastery assert from %u, "
+ "but current owner is %u! (%.*s)\n",
+ assert->node_idx, res->owner, namelen,
+ name);
+ __dlm_print_one_lock_resource(res);
+ BUG();
}
} else if (mle->type != DLM_MLE_MIGRATION) {
if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN) {
spin_lock(&res->spinlock);
/* This ensures that clear refmap is sent after the set */
- __dlm_wait_on_lockres_flags(res, (DLM_LOCK_RES_SETREF_INPROG |
- DLM_LOCK_RES_MIGRATING));
+ __dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG);
spin_unlock(&res->spinlock);
/* clear our bit from the master's refmap, ignore errors */
else
BUG_ON(res->owner == dlm->node_num);
- spin_lock(&dlm->spinlock);
+ spin_lock(&dlm->ast_lock);
/* We want to be sure that we're not freeing a lock
* that still has AST's pending... */
in_use = !list_empty(&lock->ast_list);
- spin_unlock(&dlm->spinlock);
+ spin_unlock(&dlm->ast_lock);
if (in_use) {
mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
"while waiting for an ast!", res->lockname.len,
struct ocfs2_lock_res *lockres);
static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres,
int convert);
-#define ocfs2_log_dlm_error(_func, _err, _lockres) do { \
- mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \
- _err, _func, _lockres->l_name); \
+#define ocfs2_log_dlm_error(_func, _err, _lockres) do { \
+ if ((_lockres)->l_type != OCFS2_LOCK_TYPE_DENTRY) \
+ mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \
+ _err, _func, _lockres->l_name); \
+ else \
+ mlog(ML_ERROR, "DLM error %d while calling %s on resource %.*s%08x\n", \
+ _err, _func, OCFS2_DENTRY_LOCK_INO_START - 1, (_lockres)->l_name, \
+ (unsigned int)ocfs2_get_dentry_lock_ino(_lockres)); \
} while (0)
static int ocfs2_downconvert_thread(void *arg);
static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb,
struct ocfs2_node_map osb_recovering_orphan_dirs;
unsigned int *osb_orphan_wipes;
wait_queue_head_t osb_wipe_event;
+
+ /* used to protect metaecc calculation check of xattr. */
+ spinlock_t osb_xattr_lock;
};
#define OCFS2_SB(sb) ((struct ocfs2_super *)(sb)->s_fs_info)
unlock_buffer(*bh);
ll_rw_block(READ, 1, bh);
wait_on_buffer(*bh);
+ if (!buffer_uptodate(*bh)) {
+ mlog_errno(-EIO);
+ brelse(*bh);
+ *bh = NULL;
+ return -EIO;
+ }
+
return 0;
}
INIT_LIST_HEAD(&osb->blocked_lock_list);
osb->blocked_lock_count = 0;
spin_lock_init(&osb->osb_lock);
+ spin_lock_init(&osb->osb_xattr_lock);
ocfs2_init_inode_steal_slot(osb);
atomic_set(&osb->alloc_stats.moves, 0);
#define OCFS2_XATTR_ROOT_SIZE (sizeof(struct ocfs2_xattr_def_value_root))
#define OCFS2_XATTR_INLINE_SIZE 80
+#define OCFS2_XATTR_HEADER_GAP 4
#define OCFS2_XATTR_FREE_IN_IBODY (OCFS2_MIN_XATTR_INLINE_SIZE \
- sizeof(struct ocfs2_xattr_header) \
- - sizeof(__u32))
+ - OCFS2_XATTR_HEADER_GAP)
#define OCFS2_XATTR_FREE_IN_BLOCK(ptr) ((ptr)->i_sb->s_blocksize \
- sizeof(struct ocfs2_xattr_block) \
- sizeof(struct ocfs2_xattr_header) \
- - sizeof(__u32))
+ - OCFS2_XATTR_HEADER_GAP)
static struct ocfs2_xattr_def_value_root def_xv = {
.xv.xr_list.l_count = cpu_to_le16(1),
bucket->bu_blocks, bucket->bu_bhs, 0,
NULL);
if (!rc) {
+ spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
rc = ocfs2_validate_meta_ecc_bhs(bucket->bu_inode->i_sb,
bucket->bu_bhs,
bucket->bu_blocks,
&bucket_xh(bucket)->xh_check);
+ spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
if (rc)
mlog_errno(rc);
}
{
int i;
+ spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
ocfs2_compute_meta_ecc_bhs(bucket->bu_inode->i_sb,
bucket->bu_bhs, bucket->bu_blocks,
&bucket_xh(bucket)->xh_check);
+ spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
for (i = 0; i < bucket->bu_blocks; i++)
ocfs2_journal_dirty(handle, bucket->bu_bhs[i]);
last += 1;
}
- free = min_offs - ((void *)last - xs->base) - sizeof(__u32);
+ free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP;
if (free < 0)
return -EIO;
last += 1;
}
- free = min_offs - ((void *)last - xs->base) - sizeof(__u32);
+ free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP;
if (free < 0)
return 0;
if (!ret) {
/* Update inode ctime. */
- ret = ocfs2_journal_access(ctxt->handle, inode, xis->inode_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
+ ret = ocfs2_journal_access_di(ctxt->handle, inode,
+ xis->inode_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
if (ret) {
mlog_errno(ret);
goto out;
xh_free_start = le16_to_cpu(xh->xh_free_start);
header_size = sizeof(struct ocfs2_xattr_header) +
count * sizeof(struct ocfs2_xattr_entry);
- max_free = OCFS2_XATTR_BUCKET_SIZE -
- le16_to_cpu(xh->xh_name_value_len) - header_size;
+ max_free = OCFS2_XATTR_BUCKET_SIZE - header_size -
+ le16_to_cpu(xh->xh_name_value_len) - OCFS2_XATTR_HEADER_GAP;
mlog_bug_on_msg(header_size > blocksize, "bucket %llu has header size "
"of %u which exceed block size\n",
need = 0;
}
- free = xh_free_start - header_size;
+ free = xh_free_start - header_size - OCFS2_XATTR_HEADER_GAP;
/*
* We need to make sure the new name/value pair
* can exist in the same block.
}
xh_free_start = le16_to_cpu(xh->xh_free_start);
- free = xh_free_start - header_size;
+ free = xh_free_start - header_size
+ - OCFS2_XATTR_HEADER_GAP;
if (xh_free_start % blocksize < need)
free -= xh_free_start % blocksize;
int retval;
mutex_lock(&inode->i_mutex);
-
retval = fasync_helper(fd, filp, on, &pipe->fasync_readers);
-
- if (retval >= 0)
+ if (retval >= 0) {
retval = fasync_helper(fd, filp, on, &pipe->fasync_writers);
-
+ if (retval < 0) /* this can happen only if on == T */
+ fasync_helper(-1, filp, 0, &pipe->fasync_readers);
+ }
mutex_unlock(&inode->i_mutex);
if (retval < 0)
#define KPF_RECLAIM 9
#define KPF_BUDDY 10
-#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
+#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
static ssize_t kpageflags_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
else
kflags = ppage->flags;
- uflags = kpf_copy_bit(KPF_LOCKED, PG_locked, kflags) |
+ uflags = kpf_copy_bit(kflags, KPF_LOCKED, PG_locked) |
kpf_copy_bit(kflags, KPF_ERROR, PG_error) |
kpf_copy_bit(kflags, KPF_REFERENCED, PG_referenced) |
kpf_copy_bit(kflags, KPF_UPTODATE, PG_uptodate) |
* generated a larger block - this does occasionally happen with zlib).
*/
int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
- int length, u64 *next_index, int srclength)
+ int length, u64 *next_index, int srclength, int pages)
{
struct squashfs_sb_info *msblk = sb->s_fs_info;
struct buffer_head **bh;
offset = 0;
}
- if (msblk->stream.avail_out == 0) {
+ if (msblk->stream.avail_out == 0 && page < pages) {
msblk->stream.next_out = buffer[page++];
msblk->stream.avail_out = PAGE_CACHE_SIZE;
}
zlib_init = 1;
}
- zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH);
+ zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
if (msblk->stream.avail_in == 0 && k < b)
put_bh(bh[k++]);
} while (zlib_err == Z_OK);
if (zlib_err != Z_STREAM_END) {
- ERROR("zlib_inflate returned unexpected result"
- " 0x%x, srclength %d, avail_in %d,"
- " avail_out %d\n", zlib_err, srclength,
- msblk->stream.avail_in,
- msblk->stream.avail_out);
+ ERROR("zlib_inflate error, data probably corrupt\n");
goto release_mutex;
}
zlib_err = zlib_inflateEnd(&msblk->stream);
if (zlib_err != Z_OK) {
- ERROR("zlib_inflateEnd returned unexpected result 0x%x,"
- " srclength %d\n", zlib_err, srclength);
+ ERROR("zlib_inflate error, data probably corrupt\n");
goto release_mutex;
}
length = msblk->stream.total_out;
put_bh(bh[k]);
read_failure:
- ERROR("sb_bread failed reading block 0x%llx\n", cur_index);
+ ERROR("squashfs_read_data failed to read block 0x%llx\n",
+ (unsigned long long) index);
kfree(bh);
return -EIO;
}
entry->length = squashfs_read_data(sb, entry->data,
block, length, &entry->next_index,
- cache->block_size);
+ cache->block_size, cache->pages);
spin_lock(&cache->lock);
for (i = 0; i < pages; i++, buffer += PAGE_CACHE_SIZE)
data[i] = buffer;
res = squashfs_read_data(sb, data, block, length |
- SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length);
+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length, pages);
kfree(data);
return res;
}
type = le16_to_cpu(sqshb_ino->inode_type);
switch (type) {
case SQUASHFS_REG_TYPE: {
- unsigned int frag_offset, frag_size, frag;
+ unsigned int frag_offset, frag;
+ int frag_size;
u64 frag_blk;
struct squashfs_reg_inode *sqsh_ino = &squashfs_ino.reg;
break;
}
case SQUASHFS_LREG_TYPE: {
- unsigned int frag_offset, frag_size, frag;
+ unsigned int frag_offset, frag;
+ int frag_size;
u64 frag_blk;
struct squashfs_lreg_inode *sqsh_ino = &squashfs_ino.lreg;
/* block.c */
extern int squashfs_read_data(struct super_block *, void **, u64, int, u64 *,
- int);
+ int, int);
/* cache.c */
extern struct squashfs_cache *squashfs_cache_init(char *, int, int);
return err;
}
- printk(KERN_INFO "squashfs: version 4.0 (2009/01/03) "
+ printk(KERN_INFO "squashfs: version 4.0 (2009/01/31) "
"Phillip Lougher\n");
return 0;
continue;
if (!grab_super(old))
goto retry;
- if (s)
+ if (s) {
+ up_write(&s->s_umount);
destroy_super(s);
+ }
return old;
}
}
err = set(s, data);
if (err) {
spin_unlock(&sb_lock);
+ up_write(&s->s_umount);
destroy_super(s);
return ERR_PTR(err);
}
#include <linux/backing-dev.h>
#include <linux/freezer.h>
+#include "xfs_sb.h"
+#include "xfs_inum.h"
+#include "xfs_ag.h"
+#include "xfs_dmapi.h"
+#include "xfs_mount.h"
+
static kmem_zone_t *xfs_buf_zone;
STATIC int xfsbufd(void *);
STATIC int xfsbufd_wakeup(int, gfp_t);
void
xfs_free_buftarg(
- xfs_buftarg_t *btp)
+ struct xfs_mount *mp,
+ struct xfs_buftarg *btp)
{
xfs_flush_buftarg(btp, 1);
- xfs_blkdev_issue_flush(btp);
+ if (mp->m_flags & XFS_MOUNT_BARRIER)
+ xfs_blkdev_issue_flush(btp);
xfs_free_bufhash(btp);
iput(btp->bt_mapping->host);
* Handling of buftargs.
*/
extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int);
-extern void xfs_free_buftarg(xfs_buftarg_t *);
+extern void xfs_free_buftarg(struct xfs_mount *, struct xfs_buftarg *);
extern void xfs_wait_buftarg(xfs_buftarg_t *);
extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int);
extern int xfs_flush_buftarg(xfs_buftarg_t *, int);
{
if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
struct block_device *logdev = mp->m_logdev_targp->bt_bdev;
- xfs_free_buftarg(mp->m_logdev_targp);
+ xfs_free_buftarg(mp, mp->m_logdev_targp);
xfs_blkdev_put(logdev);
}
if (mp->m_rtdev_targp) {
struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev;
- xfs_free_buftarg(mp->m_rtdev_targp);
+ xfs_free_buftarg(mp, mp->m_rtdev_targp);
xfs_blkdev_put(rtdev);
}
- xfs_free_buftarg(mp->m_ddev_targp);
+ xfs_free_buftarg(mp, mp->m_ddev_targp);
}
/*
out_free_rtdev_targ:
if (mp->m_rtdev_targp)
- xfs_free_buftarg(mp->m_rtdev_targp);
+ xfs_free_buftarg(mp, mp->m_rtdev_targp);
out_free_ddev_targ:
- xfs_free_buftarg(mp->m_ddev_targp);
+ xfs_free_buftarg(mp, mp->m_ddev_targp);
out_close_rtdev:
if (rtdev)
xfs_blkdev_put(rtdev);
goto out_destroy;
}
- if (lock_flags)
- xfs_ilock(ip, lock_flags);
-
/*
* Preload the radix tree so we can insert safely under the
* write spinlock. Note that we cannot sleep inside the preload
*/
if (radix_tree_preload(GFP_KERNEL)) {
error = EAGAIN;
- goto out_unlock;
+ goto out_destroy;
+ }
+
+ /*
+ * Because the inode hasn't been added to the radix-tree yet it can't
+ * be found by another thread, so we can do the non-sleeping lock here.
+ */
+ if (lock_flags) {
+ if (!xfs_ilock_nowait(ip, lock_flags))
+ BUG();
}
mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
out_preload_end:
write_unlock(&pag->pag_ici_lock);
radix_tree_preload_end();
-out_unlock:
if (lock_flags)
xfs_iunlock(ip, lock_flags);
out_destroy:
item = item->ri_prev;
if (item->ri_total == 0) { /* first region to be added */
- item->ri_total = in_f->ilf_size;
- ASSERT(item->ri_total <= XLOG_MAX_REGIONS_IN_ITEM);
- item->ri_buf = kmem_zalloc((item->ri_total *
- sizeof(xfs_log_iovec_t)), KM_SLEEP);
+ if (in_f->ilf_size == 0 ||
+ in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) {
+ xlog_warn(
+ "XFS: bad number of regions (%d) in inode log format",
+ in_f->ilf_size);
+ ASSERT(0);
+ return XFS_ERROR(EIO);
+ }
+
+ item->ri_total = in_f->ilf_size;
+ item->ri_buf =
+ kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t),
+ KM_SLEEP);
}
ASSERT(item->ri_total > item->ri_cnt);
/* Description region is ri_buf[0] */
void (*mode_set)(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
+ struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder);
/* detect for DAC style encoders */
enum drm_connector_status (*detect)(struct drm_encoder *encoder,
struct drm_connector *connector);
u8 hsync_pulse_width_lo;
u8 vsync_pulse_width_lo:4;
u8 vsync_offset_lo:4;
- u8 hsync_pulse_width_hi:2;
- u8 hsync_offset_hi:2;
u8 vsync_pulse_width_hi:2;
u8 vsync_offset_hi:2;
+ u8 hsync_pulse_width_hi:2;
+ u8 hsync_offset_hi:2;
u8 width_mm_lo;
u8 height_mm_lo;
u8 height_mm_hi:4;
u8 hborder;
u8 vborder;
u8 unknown0:1;
- u8 vsync_positive:1;
u8 hsync_positive:1;
+ u8 vsync_positive:1;
u8 separate_sync:2;
u8 stereo:1;
u8 unknown6:1;
header-y += cgroupstats.h
header-y += cramfs_fs.h
header-y += cycx_cfm.h
+header-y += dcbnl.h
header-y += dlmconstants.h
header-y += dlm_device.h
header-y += dlm_netlink.h
ATA_ID_DLF = 128,
ATA_ID_CSFO = 129,
ATA_ID_CFA_POWER = 160,
+ ATA_ID_CFA_KEY_MGMT = 162,
+ ATA_ID_CFA_MODES = 163,
ATA_ID_ROT_SPEED = 217,
ATA_ID_PIO4 = (1 << 1),
};
/* This should not be used directly - use rq_for_each_segment */
+#define for_each_bio(_bio) \
+ for (; _bio; _bio = _bio->bi_next)
#define __rq_for_each_bio(_bio, rq) \
if ((rq->bio)) \
for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg);
int (*resume) (struct cpufreq_policy *policy);
struct freq_attr **attr;
- bool hide_interface;
};
/* flags */
#ifndef __LINUX_DCBNL_H__
#define __LINUX_DCBNL_H__
+#include <linux/types.h>
+
#define DCB_PROTO_VERSION 1
struct dcbmsg {
- unsigned char dcb_family;
+ __u8 dcb_family;
__u8 cmd;
__u16 dcb_pad;
};
/**
* struct dma_chan_percpu - the per-CPU part of struct dma_chan
- * @refcount: local_t used for open-coded "bigref" counting
* @memcpy_count: transaction counter
* @bytes_transferred: byte counter
*/
* @cookie: last cookie value returned to client
* @chan_id: channel ID for sysfs
* @dev: class device for sysfs
- * @refcount: kref, used in "bigref" slow-mode
- * @slow_ref: indicates that the DMA channel is free
- * @rcu: the DMA channel's RCU head
* @device_node: used to add this to the device chan list
* @local: per-cpu pointer to a struct dma_chan_percpu
* @client-count: how many clients are using this channel
* @global_node: list_head for global dma_device_list
* @cap_mask: one or more dma_capability flags
* @max_xor: maximum number of xor sources, 0 if no capability
- * @refcount: reference count
- * @done: IO completion struct
* @dev_id: unique device ID
* @dev: struct device reference for dma mapping api
* @device_alloc_chan_resources: allocate resources and return the
* @device_prep_dma_interrupt: prepares an end of chain interrupt operation
* @device_prep_slave_sg: prepares a slave dma operation
* @device_terminate_all: terminate all pending operations
+ * @device_is_tx_complete: poll for transaction completion
* @device_issue_pending: push pending transactions to hardware
*/
struct dma_device {
unsigned short words69_70[2]; /* reserved words 69-70
* future command overlap and queuing
*/
- /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
unsigned short words71_74[4]; /* reserved words 71-74
* for IDENTIFY PACKET DEVICE command
*/
*/
#define I2C_RETRIES 0x0701 /* number of times a device address should
be polled when not acknowledging */
-#define I2C_TIMEOUT 0x0702 /* set timeout in jiffies - call with int */
+#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */
/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
* are NOT supported! (due to code brokenness)
struct mutex bus_lock;
struct mutex clist_lock;
- int timeout;
+ int timeout; /* in jiffies */
int retries;
struct device dev; /* the adapter device */
#define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
#define to_ide_drv(obj, cont_type) \
- container_of(obj, struct cont_type, kref)
+ container_of(obj, struct cont_type, dev)
#define ide_drv_g(disk, cont_type) \
container_of((disk)->private_data, struct cont_type, driver)
unsigned int n_ports;
struct device *dev[2];
unsigned int (*init_chipset)(struct pci_dev *);
+ irq_handler_t irq_handler;
unsigned long host_flags;
void *host_priv;
ide_hwif_t *cur_port; /* for hosts requiring serialization */
/* FSTS_REG */
#define DMA_FSTS_PPF ((u32)2)
#define DMA_FSTS_PFO ((u32)1)
+#define DMA_FSTS_IQE (1 << 4)
#define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff)
/* FRCD_REG, 32 bits access */
unsigned int size_order, u64 type,
int non_present_entry_flush);
-extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
+extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t);
* See Documentation/io_mapping.txt
*/
-/* this struct isn't actually defined anywhere */
-struct io_mapping;
-
#ifdef CONFIG_HAVE_ATOMIC_IOMAP
+struct io_mapping {
+ resource_size_t base;
+ unsigned long size;
+ pgprot_t prot;
+};
+
/*
* For small address space machines, mapping large objects
* into the kernel virtual space isn't practical. Where
*/
static inline struct io_mapping *
-io_mapping_create_wc(unsigned long base, unsigned long size)
+io_mapping_create_wc(resource_size_t base, unsigned long size)
{
- return (struct io_mapping *) base;
+ struct io_mapping *iomap;
+
+ if (!is_io_mapping_possible(base, size))
+ return NULL;
+
+ iomap = kmalloc(sizeof(*iomap), GFP_KERNEL);
+ if (!iomap)
+ return NULL;
+
+ iomap->base = base;
+ iomap->size = size;
+ iomap->prot = pgprot_writecombine(__pgprot(__PAGE_KERNEL));
+ return iomap;
}
static inline void
io_mapping_free(struct io_mapping *mapping)
{
+ kfree(mapping);
}
/* Atomic map/unmap */
static inline void *
io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
{
- offset += (unsigned long) mapping;
- return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0,
- __pgprot(__PAGE_KERNEL_WC));
+ resource_size_t phys_addr;
+ unsigned long pfn;
+
+ BUG_ON(offset >= mapping->size);
+ phys_addr = mapping->base + offset;
+ pfn = (unsigned long) (phys_addr >> PAGE_SHIFT);
+ return iomap_atomic_prot_pfn(pfn, KM_USER0, mapping->prot);
}
static inline void
static inline void *
io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
{
- offset += (unsigned long) mapping;
- return ioremap_wc(offset, PAGE_SIZE);
+ resource_size_t phys_addr;
+
+ BUG_ON(offset >= mapping->size);
+ phys_addr = mapping->base + offset;
+
+ return ioremap_wc(phys_addr, PAGE_SIZE);
}
static inline void
#else
+/* this struct isn't actually defined anywhere */
+struct io_mapping;
+
/* Create the io_mapping object*/
static inline struct io_mapping *
-io_mapping_create_wc(unsigned long base, unsigned long size)
+io_mapping_create_wc(resource_size_t base, unsigned long size)
{
return (struct io_mapping *) ioremap_wc(base, size);
}
* advised to wait only for the following duration before
* doing SRST.
*/
- ATA_TMOUT_PMP_SRST_WAIT = 1000,
+ ATA_TMOUT_PMP_SRST_WAIT = 5000,
/* ATA bus states */
BUS_UNKNOWN = 0,
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
+ unsigned int orig_n_elem;
int dma_dir;
acpi_handle acpi_handle;
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
- u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
+ /* owned by EH */
+ u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
};
/* The following initializer overrides a method to NULL whether one of
#endif
};
+/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */
+#define mm_cpumask(mm) (&(mm)->cpu_vm_mask)
+
#endif /* _LINUX_MM_TYPES_H */
extern int register_netdevice_notifier(struct notifier_block *nb);
extern int unregister_netdevice_notifier(struct notifier_block *nb);
extern int init_dummy_netdev(struct net_device *dev);
+extern void netdev_resync_ops(struct net_device *dev);
extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
extern struct net_device *dev_get_by_index(struct net *net, int ifindex);
#define _XT_NFLOG_TARGET
#define XT_NFLOG_DEFAULT_GROUP 0x1
-#define XT_NFLOG_DEFAULT_THRESHOLD 1
+#define XT_NFLOG_DEFAULT_THRESHOLD 0
#define XT_NFLOG_MASK 0x0
#define rcu_enter_nohz() do { } while (0)
#define rcu_exit_nohz() do { } while (0)
+/* A context switch is a grace period for rcuclassic. */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1;
+}
+
#endif /* __LINUX_RCUCLASSIC_H */
void (*func)(struct rcu_head *head);
};
+/* Internal to kernel, but needed by rcupreempt.h. */
+extern int rcu_scheduler_active;
+
#if defined(CONFIG_CLASSIC_RCU)
#include <linux/rcuclassic.h>
#elif defined(CONFIG_TREE_RCU)
/* Internal to kernel */
extern void rcu_init(void);
+extern void rcu_scheduler_starting(void);
extern int rcu_needs_cpu(int cpu);
#endif /* __LINUX_RCUPDATE_H */
#define rcu_exit_nohz() do { } while (0)
#endif /* CONFIG_NO_HZ */
+/*
+ * A context switch is a grace period for rcupreempt synchronize_rcu()
+ * only during early boot, before the scheduler has been initialized.
+ * So, how the heck do we get a context switch? Well, if the caller
+ * invokes synchronize_rcu(), they are willing to accept a context
+ * switch, so we simply pretend that one happened.
+ *
+ * After boot, there might be a blocked or preempted task in an RCU
+ * read-side critical section, so we cannot then take the fastpath.
+ */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1 && !rcu_scheduler_active;
+}
+
#endif /* __LINUX_RCUPREEMPT_H */
}
#endif /* CONFIG_NO_HZ */
+/* A context switch is a grace period for rcutree. */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1;
+}
+
#endif /* __LINUX_RCUTREE_H */
#endif
};
+/* Future-safe accessor for struct task_struct's cpus_allowed. */
+#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed)
+
/*
* Priority of a process goes from 0..MAX_PRIO-1, valid RT
* priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
extern int sched_group_set_rt_period(struct task_group *tg,
long rt_period_us);
extern long sched_group_rt_period(struct task_group *tg);
+extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk);
#endif
#endif
+extern int task_can_switch_user(struct user_struct *up,
+ struct task_struct *tsk);
+
#ifdef CONFIG_TASK_XACCT
static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
{
#define SERIO_FUJITSU 0x35
#define SERIO_ZHENHUA 0x36
#define SERIO_INEXIO 0x37
-#define SERIO_TOUCHIT213 0x37
+#define SERIO_TOUCHIT213 0x38
#define SERIO_W8001 0x39
#endif
struct kref kref;
struct hlist_head uidhash_table[UIDHASH_SZ];
struct user_struct *creator;
+ struct work_struct destroyer;
};
extern struct user_namespace init_user_ns;
#ifdef CONFIG_NET_NS
extern void __put_net(struct net *net);
-static inline int net_alive(struct net *net)
-{
- return net && atomic_read(&net->count);
-}
-
static inline struct net *get_net(struct net *net)
{
atomic_inc(&net->count);
}
#else
-static inline int net_alive(struct net *net)
-{
- return 1;
-}
-
static inline struct net *get_net(struct net *net)
{
return net;
void (*exit)(struct net *net);
};
+/*
+ * Use these carefully. If you implement a network device and it
+ * needs per network namespace operations use device pernet operations,
+ * otherwise use pernet subsys operations.
+ *
+ * This is critically important. Most of the network code cleanup
+ * runs with the assumption that dev_remove_pack has been called so no
+ * new packets will arrive during and after the cleanup functions have
+ * been called. dev_remove_pack is not per namespace so instead the
+ * guarantee of no more packets arriving in a network namespace is
+ * provided by ensuring that all network devices and all sockets have
+ * left the network namespace before the cleanup methods are called.
+ *
+ * For the longest time the ipv4 icmp code was registered as a pernet
+ * device which caused kernel oops, and panics during network
+ * namespace cleanup. So please don't get this wrong.
+ */
extern int register_pernet_subsys(struct pernet_operations *);
extern void unregister_pernet_subsys(struct pernet_operations *);
extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
struct nf_conn *ct = (struct nf_conn *)skb->nfct;
int ret = NF_ACCEPT;
- if (ct) {
+ if (ct && ct != &nf_conntrack_untracked) {
if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
ret = __nf_conntrack_confirm(skb);
nf_ct_deliver_cached_events(ct);
config SYSCTL
bool
+config ANON_INODES
+ bool
+
menuconfig EMBEDDED
bool "Configure standard kernel features (for small systems)"
help
This option allows to disable the internal PC-Speaker
support, saving some memory.
-config COMPAT_BRK
- bool "Disable heap randomization"
- default y
- help
- Randomizing heap placement makes heap exploits harder, but it
- also breaks ancient binaries (including anything libc5 based).
- This option changes the bootup default to heap randomization
- disabled, and can be overriden runtime by setting
- /proc/sys/kernel/randomize_va_space to 2.
-
- On non-ancient distros (post-2000 ones) N is usually a safe choice.
-
config BASE_FULL
default y
bool "Enable full-sized data structures for core" if EMBEDDED
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.
-config ANON_INODES
- bool
-
config EPOLL
bool "Enable eventpoll support" if EMBEDDED
default y
SLUB sysfs support. /sys/slab will not exist and there will be
no support for cache validation etc.
+config COMPAT_BRK
+ bool "Disable heap randomization"
+ default y
+ help
+ Randomizing heap placement makes heap exploits harder, but it
+ also breaks ancient binaries (including anything libc5 based).
+ This option changes the bootup default to heap randomization
+ disabled, and can be overriden runtime by setting
+ /proc/sys/kernel/randomize_va_space to 2.
+
+ On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
choice
prompt "Choose SLAB allocator"
default SLUB
extern void tc_init(void);
#endif
-enum system_states system_state;
+enum system_states system_state __read_mostly;
EXPORT_SYMBOL(system_state);
/*
* at least once to get things moving:
*/
init_idle_bootup_task(current);
+ rcu_scheduler_starting();
preempt_enable_no_resched();
schedule();
preempt_disable();
#endif
clear_all_latency_tracing(p);
- /* Our parent execution domain becomes current domain
- These must match for thread signalling to apply */
- p->parent_exec_id = p->self_exec_id;
-
/* ok, now we should be set up.. */
p->exit_signal = (clone_flags & CLONE_THREAD) ? -1 : (clone_flags & CSIGNAL);
p->pdeath_signal = 0;
set_task_cpu(p, smp_processor_id());
/* CLONE_PARENT re-uses the old parent */
- if (clone_flags & (CLONE_PARENT|CLONE_THREAD))
+ if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
p->real_parent = current->real_parent;
- else
+ p->parent_exec_id = current->parent_exec_id;
+ } else {
p->real_parent = current;
+ p->parent_exec_id = current->self_exec_id;
+ }
spin_lock(¤t->sighand->siglock);
void rcu_check_callbacks(int cpu, int user)
{
if (user ||
- (idle_cpu(cpu) && !in_softirq() &&
- hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+ (idle_cpu(cpu) && rcu_scheduler_active &&
+ !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
/*
* Get here if this CPU took its interrupt from user
#include <linux/cpu.h>
#include <linux/mutex.h>
#include <linux/module.h>
+#include <linux/kernel_stat.h>
enum rcu_barrier {
RCU_BARRIER_STD,
static atomic_t rcu_barrier_cpu_count;
static DEFINE_MUTEX(rcu_barrier_mutex);
static struct completion rcu_barrier_completion;
+int rcu_scheduler_active __read_mostly;
/*
* Awaken the corresponding synchronize_rcu() instance now that a
void synchronize_rcu(void)
{
struct rcu_synchronize rcu;
+
+ if (rcu_blocking_is_gp())
+ return;
+
init_completion(&rcu.completion);
/* Will wake me after RCU finished. */
call_rcu(&rcu.head, wakeme_after_rcu);
__rcu_init();
}
+void rcu_scheduler_starting(void)
+{
+ WARN_ON(num_online_cpus() != 1);
+ WARN_ON(nr_context_switches() > 0);
+ rcu_scheduler_active = 1;
+}
{
struct rcu_synchronize rcu;
+ if (num_online_cpus() == 1)
+ return; /* blocking is gp if only one CPU! */
+
init_completion(&rcu.completion);
/* Will wake me after RCU finished. */
call_rcu_sched(&rcu.head, wakeme_after_rcu);
void rcu_check_callbacks(int cpu, int user)
{
if (user ||
- (idle_cpu(cpu) && !in_softirq() &&
- hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+ (idle_cpu(cpu) && rcu_scheduler_active &&
+ !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
/*
* Get here if this CPU took its interrupt from user
{
ktime_t now;
- if (rt_bandwidth_enabled() && rt_b->rt_runtime == RUNTIME_INF)
+ if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
return;
if (hrtimer_active(&rt_b->rt_period_timer))
return ret;
}
+
+int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk)
+{
+ /* Don't accept realtime tasks when there is no way for them to run */
+ if (rt_task(tsk) && tg->rt_bandwidth.rt_runtime == 0)
+ return 0;
+
+ return 1;
+}
+
#else /* !CONFIG_RT_GROUP_SCHED */
static int sched_rt_global_constraints(void)
{
struct task_struct *tsk)
{
#ifdef CONFIG_RT_GROUP_SCHED
- /* Don't accept realtime tasks when there is no way for them to run */
- if (rt_task(tsk) && cgroup_tg(cgrp)->rt_bandwidth.rt_runtime == 0)
+ if (!sched_rt_can_attach(cgroup_tg(cgrp), tsk))
return -EINVAL;
#else
/* We don't support RT-tasks being in separate groups */
#include <linux/seccomp.h>
#include <linux/sched.h>
+#include <linux/compat.h>
/* #define SECCOMP_DEBUG 1 */
#define NR_SECCOMP_MODES 1
0, /* null terminated */
};
-#ifdef TIF_32BIT
+#ifdef CONFIG_COMPAT
static int mode1_syscalls_32[] = {
__NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
0, /* null terminated */
switch (mode) {
case 1:
syscall = mode1_syscalls;
-#ifdef TIF_32BIT
- if (test_thread_flag(TIF_32BIT))
+#ifdef CONFIG_COMPAT
+ if (is_compat_task())
syscall = mode1_syscalls_32;
#endif
do {
preempt_enable_no_resched();
cond_resched();
preempt_disable();
+ rcu_qsctr_inc((long)__bind_cpu);
}
preempt_enable();
set_current_state(TASK_INTERRUPTIBLE);
abort_creds(new);
return retval;
}
-
+
/*
* change the user struct in a credentials set to match the new UID
*/
if (!new_user)
return -EAGAIN;
+ if (!task_can_switch_user(new_user, current)) {
+ free_uid(new_user);
+ return -EINVAL;
+ }
+
if (atomic_read(&new_user->processes) >=
current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
new_user != INIT_USER) {
goto error;
}
- retval = -EAGAIN;
- if (new->uid != old->uid && set_user(new) < 0)
- goto error;
-
+ if (new->uid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
+ }
if (ruid != (uid_t) -1 ||
(euid != (uid_t) -1 && euid != old->uid))
new->suid = new->euid;
retval = -EPERM;
if (capable(CAP_SETUID)) {
new->suid = new->uid = uid;
- if (uid != old->uid && set_user(new) < 0) {
- retval = -EAGAIN;
- goto error;
+ if (uid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
}
} else if (uid != old->uid && uid != new->suid) {
goto error;
goto error;
}
- retval = -EAGAIN;
if (ruid != (uid_t) -1) {
new->uid = ruid;
- if (ruid != old->uid && set_user(new) < 0)
- goto error;
+ if (ruid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
+ }
}
if (euid != (uid_t) -1)
new->euid = euid;
if (likely(tsk->mm)) {
cputime_t time, dtime;
struct timeval value;
+ unsigned long flags;
u64 delta;
+ local_irq_save(flags);
time = tsk->stime + tsk->utime;
dtime = cputime_sub(time, tsk->acct_timexpd);
jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
delta = delta * USEC_PER_SEC + value.tv_usec;
if (delta == 0)
- return;
+ goto out;
tsk->acct_timexpd = time;
tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
+ out:
+ local_irq_restore(flags);
}
}
/* work function to remove sysfs directory for a user and free up
* corresponding structures.
*/
-static void remove_user_sysfs_dir(struct work_struct *w)
+static void cleanup_user_struct(struct work_struct *w)
{
struct user_struct *up = container_of(w, struct user_struct, work);
unsigned long flags;
int remove_user = 0;
- if (up->user_ns != &init_user_ns)
- return;
/* Make uid_hash_remove() + sysfs_remove_file() + kobject_del()
* atomic.
*/
if (!remove_user)
goto done;
- kobject_uevent(&up->kobj, KOBJ_REMOVE);
- kobject_del(&up->kobj);
- kobject_put(&up->kobj);
+ if (up->user_ns == &init_user_ns) {
+ kobject_uevent(&up->kobj, KOBJ_REMOVE);
+ kobject_del(&up->kobj);
+ kobject_put(&up->kobj);
+ }
sched_destroy_user(up);
key_put(up->uid_keyring);
atomic_inc(&up->__count);
spin_unlock_irqrestore(&uidhash_lock, flags);
- INIT_WORK(&up->work, remove_user_sysfs_dir);
+ INIT_WORK(&up->work, cleanup_user_struct);
schedule_work(&up->work);
}
#endif
+#if defined(CONFIG_RT_GROUP_SCHED) && defined(CONFIG_USER_SCHED)
+/*
+ * We need to check if a setuid can take place. This function should be called
+ * before successfully completing the setuid.
+ */
+int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+{
+
+ return sched_rt_can_attach(up->tg, tsk);
+
+}
+#else
+int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+{
+ return 1;
+}
+#endif
+
/*
* Locate the user_struct for the passed UID. If found, take a ref on it. The
* caller must undo that ref with free_uid().
return 0;
}
-void free_user_ns(struct kref *kref)
+/*
+ * Deferred destructor for a user namespace. This is required because
+ * free_user_ns() may be called with uidhash_lock held, but we need to call
+ * back to free_uid() which will want to take the lock again.
+ */
+static void free_user_ns_work(struct work_struct *work)
{
- struct user_namespace *ns;
-
- ns = container_of(kref, struct user_namespace, kref);
+ struct user_namespace *ns =
+ container_of(work, struct user_namespace, destroyer);
free_uid(ns->creator);
kfree(ns);
}
+
+void free_user_ns(struct kref *kref)
+{
+ struct user_namespace *ns =
+ container_of(kref, struct user_namespace, kref);
+
+ INIT_WORK(&ns->destroyer, free_user_ns_work);
+ schedule_work(&ns->destroyer);
+}
EXPORT_SYMBOL(free_user_ns);
n = idp->layers * IDR_BITS;
p = idp->top;
+ rcu_assign_pointer(idp->top, NULL);
max = 1 << n;
id = 0;
p = *--paa;
}
}
- rcu_assign_pointer(idp->top, NULL);
idp->layers = 0;
}
EXPORT_SYMBOL(idr_remove_all);
*/
static inline int shmem_acct_size(unsigned long flags, loff_t size)
{
- return (flags & VM_ACCOUNT) ?
- security_vm_enough_memory_kern(VM_ACCT(size)) : 0;
+ return (flags & VM_NORESERVE) ?
+ 0 : security_vm_enough_memory_kern(VM_ACCT(size));
}
static inline void shmem_unacct_size(unsigned long flags, loff_t size)
{
- if (flags & VM_ACCOUNT)
+ if (!(flags & VM_NORESERVE))
vm_unacct_memory(VM_ACCT(size));
}
*/
static inline int shmem_acct_block(unsigned long flags)
{
- return (flags & VM_ACCOUNT) ?
- 0 : security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE));
+ return (flags & VM_NORESERVE) ?
+ security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE)) : 0;
}
static inline void shmem_unacct_blocks(unsigned long flags, long pages)
{
- if (!(flags & VM_ACCOUNT))
+ if (flags & VM_NORESERVE)
vm_unacct_memory(pages * VM_ACCT(PAGE_CACHE_SIZE));
}
return 0;
}
-static struct inode *
-shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
+static struct inode *shmem_get_inode(struct super_block *sb, int mode,
+ dev_t dev, unsigned long flags)
{
struct inode *inode;
struct shmem_inode_info *info;
info = SHMEM_I(inode);
memset(info, 0, (char *)inode - (char *)info);
spin_lock_init(&info->lock);
+ info->flags = flags & VM_NORESERVE;
INIT_LIST_HEAD(&info->swaplist);
switch (mode & S_IFMT) {
static int
shmem_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
{
- struct inode *inode = shmem_get_inode(dir->i_sb, mode, dev);
+ struct inode *inode;
int error = -ENOSPC;
+ inode = shmem_get_inode(dir->i_sb, mode, dev, VM_NORESERVE);
if (inode) {
error = security_inode_init_security(inode, dir, NULL, NULL,
NULL);
if (len > PAGE_CACHE_SIZE)
return -ENAMETOOLONG;
- inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0);
+ inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0, VM_NORESERVE);
if (!inode)
return -ENOSPC;
sb->s_flags |= MS_POSIXACL;
#endif
- inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0);
+ inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0, VM_NORESERVE);
if (!inode)
goto failed;
inode->i_uid = sbinfo->uid;
return 0;
}
-#define shmem_file_operations ramfs_file_operations
-#define shmem_vm_ops generic_file_vm_ops
-#define shmem_get_inode ramfs_get_inode
-#define shmem_acct_size(a, b) 0
-#define shmem_unacct_size(a, b) do {} while (0)
-#define SHMEM_MAX_BYTES LLONG_MAX
+#define shmem_vm_ops generic_file_vm_ops
+#define shmem_file_operations ramfs_file_operations
+#define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev)
+#define shmem_acct_size(flags, size) 0
+#define shmem_unacct_size(flags, size) do {} while (0)
+#define SHMEM_MAX_BYTES LLONG_MAX
#endif /* CONFIG_SHMEM */
* shmem_file_setup - get an unlinked file living in tmpfs
* @name: name for dentry (to be seen in /proc/<pid>/maps
* @size: size to be set for the file
- * @flags: vm_flags
+ * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
*/
struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
{
goto put_dentry;
error = -ENOSPC;
- inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
+ inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0, flags);
if (!inode)
goto close_file;
-#ifdef CONFIG_SHMEM
- SHMEM_I(inode)->flags = (flags & VM_NORESERVE) ? 0 : VM_ACCOUNT;
-#endif
d_instantiate(dentry, inode);
inode->i_size = size;
inode->i_nlink = 0; /* It is unlinked */
unsigned long addr;
int purged = 0;
+ BUG_ON(!size);
BUG_ON(size & ~PAGE_MASK);
va = kmalloc_node(sizeof(struct vmap_area),
addr = ALIGN(vstart, align);
spin_lock(&vmap_area_lock);
+ if (addr + size - 1 < addr)
+ goto overflow;
+
/* XXX: could have a last_hole cache */
n = vmap_area_root.rb_node;
if (n) {
while (addr + size > first->va_start && addr + size <= vend) {
addr = ALIGN(first->va_end + PAGE_SIZE, align);
+ if (addr + size - 1 < addr)
+ goto overflow;
n = rb_next(&first->rb_node);
if (n)
}
found:
if (addr + size > vend) {
+overflow:
spin_unlock(&vmap_area_lock);
if (!purged) {
purge_vmap_area_lazy();
static DEFINE_SPINLOCK(purge_lock);
LIST_HEAD(valist);
struct vmap_area *va;
+ struct vmap_area *n_va;
int nr = 0;
/*
if (nr) {
spin_lock(&vmap_area_lock);
- list_for_each_entry(va, &valist, purge_list)
+ list_for_each_entry_safe(va, n_va, &valist, purge_list)
__free_vmap_area(va);
spin_unlock(&vmap_area_lock);
}
int file = is_file_lru(l);
int scan;
- scan = zone_page_state(zone, NR_LRU_BASE + l);
+ scan = zone_nr_pages(zone, sc, l);
if (priority) {
scan >>= priority;
scan = (scan * percent[file]) / 100;
EXPORT_SYMBOL(tr_type_trans);
EXPORT_SYMBOL(alloc_trdev);
+
+MODULE_LICENSE("GPL");
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
+#include <linux/netpoll.h>
#include "vlan.h"
/* VLAN rx hw acceleration helper. This acts like netif_{rx,receive_skb}(). */
int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
u16 vlan_tci, int polling)
{
+ if (netpoll_rx(skb))
+ return NET_RX_DROP;
+
if (skb_bond_should_drop(skb))
goto drop;
{
int err = NET_RX_SUCCESS;
+ if (netpoll_receive_skb(skb))
+ return NET_RX_DROP;
+
switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
case -1:
return netif_receive_skb(skb);
if (!skb)
goto out;
+ if (netpoll_receive_skb(skb))
+ goto out;
+
err = NET_RX_SUCCESS;
switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
int err = 0;
if (netif_device_present(real_dev) && ops->ndo_neigh_setup)
- err = ops->ndo_neigh_setup(dev, pa);
+ err = ops->ndo_neigh_setup(real_dev, pa);
return err;
}
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
dev->netdev_ops = &vlan_netdev_ops;
}
+ netdev_resync_ops(dev);
if (is_vlan_dev(real_dev))
subclass = 1;
rcu_read_lock();
- /* Don't receive packets in an exiting network namespace */
- if (!net_alive(dev_net(skb->dev))) {
- kfree_skb(skb);
- goto out;
- }
-
#ifdef CONFIG_NET_CLS_ACT
if (skb->tc_verd & TC_NCLS) {
skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
{
+ if (netpoll_receive_skb(skb))
+ return NET_RX_DROP;
+
switch (__napi_gro_receive(napi, skb)) {
case -1:
return netif_receive_skb(skb);
if (!skb)
goto out;
+ if (netpoll_receive_skb(skb))
+ goto out;
+
err = NET_RX_SUCCESS;
switch (__napi_gro_receive(napi, skb)) {
}
EXPORT_SYMBOL(netdev_fix_features);
+/* Some devices need to (re-)set their netdev_ops inside
+ * ->init() or similar. If that happens, we have to setup
+ * the compat pointers again.
+ */
+void netdev_resync_ops(struct net_device *dev)
+{
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+ const struct net_device_ops *ops = dev->netdev_ops;
+
+ dev->init = ops->ndo_init;
+ dev->uninit = ops->ndo_uninit;
+ dev->open = ops->ndo_open;
+ dev->change_rx_flags = ops->ndo_change_rx_flags;
+ dev->set_rx_mode = ops->ndo_set_rx_mode;
+ dev->set_multicast_list = ops->ndo_set_multicast_list;
+ dev->set_mac_address = ops->ndo_set_mac_address;
+ dev->validate_addr = ops->ndo_validate_addr;
+ dev->do_ioctl = ops->ndo_do_ioctl;
+ dev->set_config = ops->ndo_set_config;
+ dev->change_mtu = ops->ndo_change_mtu;
+ dev->neigh_setup = ops->ndo_neigh_setup;
+ dev->tx_timeout = ops->ndo_tx_timeout;
+ dev->get_stats = ops->ndo_get_stats;
+ dev->vlan_rx_register = ops->ndo_vlan_rx_register;
+ dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
+ dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ops->ndo_poll_controller;
+#endif
+#endif
+}
+EXPORT_SYMBOL(netdev_resync_ops);
+
/**
* register_netdevice - register a network device
* @dev: device to register
* This is temporary until all network devices are converted.
*/
if (dev->netdev_ops) {
- const struct net_device_ops *ops = dev->netdev_ops;
-
- dev->init = ops->ndo_init;
- dev->uninit = ops->ndo_uninit;
- dev->open = ops->ndo_open;
- dev->change_rx_flags = ops->ndo_change_rx_flags;
- dev->set_rx_mode = ops->ndo_set_rx_mode;
- dev->set_multicast_list = ops->ndo_set_multicast_list;
- dev->set_mac_address = ops->ndo_set_mac_address;
- dev->validate_addr = ops->ndo_validate_addr;
- dev->do_ioctl = ops->ndo_do_ioctl;
- dev->set_config = ops->ndo_set_config;
- dev->change_mtu = ops->ndo_change_mtu;
- dev->tx_timeout = ops->ndo_tx_timeout;
- dev->get_stats = ops->ndo_get_stats;
- dev->vlan_rx_register = ops->ndo_vlan_rx_register;
- dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
- dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ops->ndo_poll_controller;
-#endif
+ netdev_resync_ops(dev);
} else {
char drivername[64];
pr_info("%s (%s): not using net_device_ops yet\n",
if (endp == buf)
goto err;
- rtnl_lock();
+ if (!rtnl_trylock())
+ return -ERESTARTSYS;
+
if (dev_isalive(net)) {
if ((ret = (*set)(net, new)) == 0)
ret = len;
struct pernet_operations *ops;
struct net *net;
- /* Be very certain incoming network packets will not find us */
- rcu_barrier();
-
net = container_of(work, struct net, work);
mutex_lock(&net_mutex);
int __init icmp_init(void)
{
- return register_pernet_device(&icmp_sk_ops);
+ return register_pernet_subsys(&icmp_sk_ops);
}
EXPORT_SYMBOL(icmp_err_convert);
static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
struct tcp_sacktag_state *state,
- unsigned int pcount, int shifted, int mss)
+ unsigned int pcount, int shifted, int mss,
+ int dup_sack)
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
}
/* We discard results */
- tcp_sacktag_one(skb, sk, state, 0, pcount);
+ tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
/* Difference in this won't matter, both ACKed by the same cumul. ACK */
TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
if (!skb_shift(prev, skb, len))
goto fallback;
- if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss))
+ if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))
goto out;
/* Hole filled allows collapsing with the next as well, this is very
len = skb->len;
if (skb_shift(prev, skb, len)) {
pcount += tcp_skb_pcount(skb);
- tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss);
+ tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss, 0);
}
out:
void __init tcp_v4_init(void)
{
inet_hashinfo_init(&tcp_hashinfo);
- if (register_pernet_device(&tcp_sk_ops))
+ if (register_pernet_subsys(&tcp_sk_ops))
panic("Failed to create the TCP control socket.\n");
}
/* Tom Kelly's Scalable TCP
*
- * See htt://www-lce.eng.cam.ac.uk/~ctk21/scalable/
+ * See http://www.deneholme.net/tom/scalable/
*
* John Heffner <jheffner@sc.edu>
*/
read_unlock(&dev_base_lock);
}
-static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
+static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
{
struct net *net;
net = (struct net *)table->extra2;
if (p == &net->ipv6.devconf_dflt->forwarding)
- return;
+ return 0;
+
+ if (!rtnl_trylock())
+ return -ERESTARTSYS;
- rtnl_lock();
if (p == &net->ipv6.devconf_all->forwarding) {
__s32 newf = net->ipv6.devconf_all->forwarding;
net->ipv6.devconf_dflt->forwarding = newf;
if (*p)
rt6_purge_dflt_routers(net);
+ return 1;
}
#endif
ASSERT_RTNL();
- if ((dev->flags & IFF_LOOPBACK) && how == 1)
- how = 0;
-
rt6_ifdown(net, dev);
neigh_ifdown(&nd_tbl, dev);
ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
if (write)
- addrconf_fixup_forwarding(ctl, valp, val);
+ ret = addrconf_fixup_forwarding(ctl, valp, val);
return ret;
}
}
*valp = new;
- addrconf_fixup_forwarding(table, valp, val);
- return 1;
+ return addrconf_fixup_forwarding(table, valp, val);
}
static struct addrconf_sysctl_table
EXPORT_SYMBOL(unregister_inet6addr_notifier);
-static void addrconf_net_exit(struct net *net)
-{
- struct net_device *dev;
-
- rtnl_lock();
- /* clean dev list */
- for_each_netdev(net, dev) {
- if (__in6_dev_get(dev) == NULL)
- continue;
- addrconf_ifdown(dev, 1);
- }
- addrconf_ifdown(net->loopback_dev, 2);
- rtnl_unlock();
-}
-
-static struct pernet_operations addrconf_net_ops = {
- .exit = addrconf_net_exit,
-};
-
/*
* Init / cleanup code
*/
if (err)
goto errlo;
- err = register_pernet_device(&addrconf_net_ops);
- if (err)
- return err;
-
register_netdevice_notifier(&ipv6_dev_notf);
addrconf_verify(0);
void addrconf_cleanup(void)
{
struct inet6_ifaddr *ifa;
+ struct net_device *dev;
int i;
unregister_netdevice_notifier(&ipv6_dev_notf);
- unregister_pernet_device(&addrconf_net_ops);
-
unregister_pernet_subsys(&addrconf_ops);
rtnl_lock();
+ /* clean dev list */
+ for_each_netdev(&init_net, dev) {
+ if (__in6_dev_get(dev) == NULL)
+ continue;
+ addrconf_ifdown(dev, 1);
+ }
+ addrconf_ifdown(init_net.loopback_dev, 2);
+
/*
* Check hash table.
*/
del_timer(&addr_chk_timer);
rtnl_unlock();
-
- unregister_pernet_subsys(&addrconf_net_ops);
}
static struct list_head inetsw6[SOCK_MAX];
static DEFINE_SPINLOCK(inetsw6_lock);
+static int disable_ipv6 = 0;
+module_param_named(disable, disable_ipv6, int, 0);
+MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+
static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
{
const int offset = sk->sk_prot->obj_size - sizeof(struct ipv6_pinfo);
{
struct sk_buff *dummy_skb;
struct list_head *r;
- int err;
+ int err = 0;
BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb));
+ /* Register the socket-side information for inet6_create. */
+ for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
+ INIT_LIST_HEAD(r);
+
+ if (disable_ipv6) {
+ printk(KERN_INFO
+ "IPv6: Loaded, but administratively disabled, "
+ "reboot required to enable\n");
+ goto out;
+ }
+
err = proto_register(&tcpv6_prot, 1);
if (err)
goto out;
goto out_unregister_udplite_proto;
- /* Register the socket-side information for inet6_create. */
- for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
- INIT_LIST_HEAD(r);
-
/* We MUST register RAW sockets before we create the ICMP6,
* IGMP6, or NDISC control sockets.
*/
if (twp != NULL) {
*twp = tw;
- NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+ NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
} else if (tw != NULL) {
/* Silly. Should hash-dance instead... */
inet_twsk_deschedule(tw, death_row);
- NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+ NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
inet_twsk_put(tw);
}
if (net->ct.sysctl_checksum && hooknum == NF_INET_PRE_ROUTING &&
nf_ip6_checksum(skb, hooknum, dataoff, IPPROTO_ICMPV6)) {
- nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
- "nf_ct_icmpv6: ICMPv6 checksum failed\n");
+ if (LOG_INVALID(net, IPPROTO_ICMPV6))
+ nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
+ "nf_ct_icmpv6: ICMPv6 checksum failed ");
return -NF_ACCEPT;
}
#endif
#define NFULNL_NLBUFSIZ_DEFAULT NLMSG_GOODSIZE
-#define NFULNL_TIMEOUT_DEFAULT HZ /* every second */
+#define NFULNL_TIMEOUT_DEFAULT 100 /* every second */
#define NFULNL_QTHRESH_DEFAULT 100 /* 100 packets */
#define NFULNL_COPY_RANGE_MAX 0xFFFF /* max packet size is limited by 16-bit struct nfattr nfa_len field */
qthreshold = inst->qthreshold;
/* per-rule qthreshold overrides per-instance */
- if (qthreshold > li->u.ulog.qthreshold)
- qthreshold = li->u.ulog.qthreshold;
+ if (li->u.ulog.qthreshold)
+ if (qthreshold > li->u.ulog.qthreshold)
+ qthreshold = li->u.ulog.qthreshold;
+
switch (inst->copy_mode) {
case NFULNL_COPY_META:
.release = seq_release_net,
};
-static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
+/*
+ * Traverse state for ip{,6}_{tables,matches} for helping crossing
+ * the multi-AF mutexes.
+ */
+struct nf_mttg_trav {
+ struct list_head *head, *curr;
+ uint8_t class, nfproto;
+};
+
+enum {
+ MTTG_TRAV_INIT,
+ MTTG_TRAV_NFP_UNSPEC,
+ MTTG_TRAV_NFP_SPEC,
+ MTTG_TRAV_DONE,
+};
+
+static void *xt_mttg_seq_next(struct seq_file *seq, void *v, loff_t *ppos,
+ bool is_target)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ static const uint8_t next_class[] = {
+ [MTTG_TRAV_NFP_UNSPEC] = MTTG_TRAV_NFP_SPEC,
+ [MTTG_TRAV_NFP_SPEC] = MTTG_TRAV_DONE,
+ };
+ struct nf_mttg_trav *trav = seq->private;
+
+ switch (trav->class) {
+ case MTTG_TRAV_INIT:
+ trav->class = MTTG_TRAV_NFP_UNSPEC;
+ mutex_lock(&xt[NFPROTO_UNSPEC].mutex);
+ trav->head = trav->curr = is_target ?
+ &xt[NFPROTO_UNSPEC].target : &xt[NFPROTO_UNSPEC].match;
+ break;
+ case MTTG_TRAV_NFP_UNSPEC:
+ trav->curr = trav->curr->next;
+ if (trav->curr != trav->head)
+ break;
+ mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+ mutex_lock(&xt[trav->nfproto].mutex);
+ trav->head = trav->curr = is_target ?
+ &xt[trav->nfproto].target : &xt[trav->nfproto].match;
+ trav->class = next_class[trav->class];
+ break;
+ case MTTG_TRAV_NFP_SPEC:
+ trav->curr = trav->curr->next;
+ if (trav->curr != trav->head)
+ break;
+ /* fallthru, _stop will unlock */
+ default:
+ return NULL;
+ }
- mutex_lock(&xt[af].mutex);
- return seq_list_start(&xt[af].match, *pos);
+ if (ppos != NULL)
+ ++*ppos;
+ return trav;
}
-static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+static void *xt_mttg_seq_start(struct seq_file *seq, loff_t *pos,
+ bool is_target)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ struct nf_mttg_trav *trav = seq->private;
+ unsigned int j;
- return seq_list_next(v, &xt[af].match, pos);
+ trav->class = MTTG_TRAV_INIT;
+ for (j = 0; j < *pos; ++j)
+ if (xt_mttg_seq_next(seq, NULL, NULL, is_target) == NULL)
+ return NULL;
+ return trav;
}
-static void xt_match_seq_stop(struct seq_file *seq, void *v)
+static void xt_mttg_seq_stop(struct seq_file *seq, void *v)
{
- struct proc_dir_entry *pde = seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ struct nf_mttg_trav *trav = seq->private;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+ break;
+ case MTTG_TRAV_NFP_SPEC:
+ mutex_unlock(&xt[trav->nfproto].mutex);
+ break;
+ }
+}
- mutex_unlock(&xt[af].mutex);
+static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ return xt_mttg_seq_start(seq, pos, false);
}
-static int xt_match_seq_show(struct seq_file *seq, void *v)
+static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
{
- struct xt_match *match = list_entry(v, struct xt_match, list);
+ return xt_mttg_seq_next(seq, v, ppos, false);
+}
- if (strlen(match->name))
- return seq_printf(seq, "%s\n", match->name);
- else
- return 0;
+static int xt_match_seq_show(struct seq_file *seq, void *v)
+{
+ const struct nf_mttg_trav *trav = seq->private;
+ const struct xt_match *match;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ case MTTG_TRAV_NFP_SPEC:
+ if (trav->curr == trav->head)
+ return 0;
+ match = list_entry(trav->curr, struct xt_match, list);
+ return (*match->name == '\0') ? 0 :
+ seq_printf(seq, "%s\n", match->name);
+ }
+ return 0;
}
static const struct seq_operations xt_match_seq_ops = {
.start = xt_match_seq_start,
.next = xt_match_seq_next,
- .stop = xt_match_seq_stop,
+ .stop = xt_mttg_seq_stop,
.show = xt_match_seq_show,
};
static int xt_match_open(struct inode *inode, struct file *file)
{
+ struct seq_file *seq;
+ struct nf_mttg_trav *trav;
int ret;
- ret = seq_open(file, &xt_match_seq_ops);
- if (!ret) {
- struct seq_file *seq = file->private_data;
+ trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+ if (trav == NULL)
+ return -ENOMEM;
- seq->private = PDE(inode);
+ ret = seq_open(file, &xt_match_seq_ops);
+ if (ret < 0) {
+ kfree(trav);
+ return ret;
}
- return ret;
+
+ seq = file->private_data;
+ seq->private = trav;
+ trav->nfproto = (unsigned long)PDE(inode)->data;
+ return 0;
}
static const struct file_operations xt_match_ops = {
.open = xt_match_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
static void *xt_target_seq_start(struct seq_file *seq, loff_t *pos)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- mutex_lock(&xt[af].mutex);
- return seq_list_start(&xt[af].target, *pos);
+ return xt_mttg_seq_start(seq, pos, true);
}
-static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- return seq_list_next(v, &xt[af].target, pos);
-}
-
-static void xt_target_seq_stop(struct seq_file *seq, void *v)
-{
- struct proc_dir_entry *pde = seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- mutex_unlock(&xt[af].mutex);
+ return xt_mttg_seq_next(seq, v, ppos, true);
}
static int xt_target_seq_show(struct seq_file *seq, void *v)
{
- struct xt_target *target = list_entry(v, struct xt_target, list);
-
- if (strlen(target->name))
- return seq_printf(seq, "%s\n", target->name);
- else
- return 0;
+ const struct nf_mttg_trav *trav = seq->private;
+ const struct xt_target *target;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ case MTTG_TRAV_NFP_SPEC:
+ if (trav->curr == trav->head)
+ return 0;
+ target = list_entry(trav->curr, struct xt_target, list);
+ return (*target->name == '\0') ? 0 :
+ seq_printf(seq, "%s\n", target->name);
+ }
+ return 0;
}
static const struct seq_operations xt_target_seq_ops = {
.start = xt_target_seq_start,
.next = xt_target_seq_next,
- .stop = xt_target_seq_stop,
+ .stop = xt_mttg_seq_stop,
.show = xt_target_seq_show,
};
static int xt_target_open(struct inode *inode, struct file *file)
{
+ struct seq_file *seq;
+ struct nf_mttg_trav *trav;
int ret;
- ret = seq_open(file, &xt_target_seq_ops);
- if (!ret) {
- struct seq_file *seq = file->private_data;
+ trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+ if (trav == NULL)
+ return -ENOMEM;
- seq->private = PDE(inode);
+ ret = seq_open(file, &xt_target_seq_ops);
+ if (ret < 0) {
+ kfree(trav);
+ return ret;
}
- return ret;
+
+ seq = file->private_data;
+ seq->private = trav;
+ trav->nfproto = (unsigned long)PDE(inode)->data;
+ return 0;
}
static const struct file_operations xt_target_ops = {
.open = xt_target_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
#define FORMAT_TABLES "_tables_names"
struct recent_entry *e;
char buf[sizeof("+b335:1d35:1e55:dead:c0de:1715:5afe:c0de")];
const char *c = buf;
- union nf_inet_addr addr;
+ union nf_inet_addr addr = {};
u_int16_t family;
bool add, succ;
return 0;
}
+/**
+ * netlink_set_err - report error to broadcast listeners
+ * @ssk: the kernel netlink socket, as returned by netlink_kernel_create()
+ * @pid: the PID of a process that we want to skip (if any)
+ * @groups: the broadcast group that will notice the error
+ * @code: error code, must be negative (as usual in kernelspace)
+ */
void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
{
struct netlink_set_err_data info;
info.exclude_sk = ssk;
info.pid = pid;
info.group = group;
- info.code = code;
+ /* sk->sk_err wants a positive error value */
+ info.code = -code;
read_lock(&nl_table_lock);
if (R_tab == NULL)
goto failure;
- if (!est && (ret == ACT_P_CREATED ||
- !gen_estimator_active(&police->tcf_bstats,
- &police->tcf_rate_est))) {
- err = -EINVAL;
- goto failure;
- }
-
if (parm->peakrate.rate) {
P_tab = qdisc_get_rtab(&parm->peakrate,
tb[TCA_POLICE_PEAKRATE]);
&police->tcf_lock, est);
if (err)
goto failure_unlock;
+ } else if (tb[TCA_POLICE_AVRATE] &&
+ (ret == ACT_P_CREATED ||
+ !gen_estimator_active(&police->tcf_bstats,
+ &police->tcf_rate_est))) {
+ err = -EINVAL;
+ goto failure_unlock;
}
/* No failure allowed after this point */
{
struct drr_sched *q = qdisc_priv(sch);
struct drr_class *cl = (struct drr_class *)*arg;
+ struct nlattr *opt = tca[TCA_OPTIONS];
struct nlattr *tb[TCA_DRR_MAX + 1];
u32 quantum;
int err;
- err = nla_parse_nested(tb, TCA_DRR_MAX, tca[TCA_OPTIONS], drr_policy);
+ if (!opt)
+ return -EINVAL;
+
+ err = nla_parse_nested(tb, TCA_DRR_MAX, opt, drr_policy);
if (err < 0)
return err;
static int sctp_ctl_sock_init(void)
{
int err;
- sa_family_t family;
+ sa_family_t family = PF_INET;
if (sctp_get_pf_specific(PF_INET6))
family = PF_INET6;
- else
- family = PF_INET;
err = inet_ctl_sock_create(&sctp_ctl_sock, family,
SOCK_SEQPACKET, IPPROTO_SCTP, &init_net);
+
+ /* If IPv6 socket could not be created, try the IPv4 socket */
+ if (err < 0 && family == PF_INET6)
+ err = inet_ctl_sock_create(&sctp_ctl_sock, AF_INET,
+ SOCK_SEQPACKET, IPPROTO_SCTP,
+ &init_net);
+
if (err < 0) {
printk(KERN_ERR
"SCTP: Failed to create the SCTP control socket.\n");
out:
return status;
err_v6_add_protocol:
- sctp_v6_del_protocol();
-err_add_protocol:
sctp_v4_del_protocol();
+err_add_protocol:
inet_ctl_sock_destroy(sctp_ctl_sock);
err_ctl_sock_init:
sctp_v6_protosw_exit();
sctp_v4_pf_exit();
sctp_v6_pf_exit();
sctp_sysctl_unregister();
- list_del(&sctp_af_inet.list);
free_pages((unsigned long)sctp_port_hashtable,
get_order(sctp_port_hashsize *
sizeof(struct sctp_bind_hashbucket)));
sctp_v4_pf_exit();
sctp_sysctl_unregister();
- list_del(&sctp_af_inet.list);
free_pages((unsigned long)sctp_assoc_hashtable,
get_order(sctp_assoc_hashsize *
struct sctp_association *asoc,
struct sctp_chunk *chunk)
{
- struct sctp_operr_chunk *operr_chunk;
struct sctp_errhdr *err_hdr;
+ struct sctp_ulpevent *ev;
- operr_chunk = (struct sctp_operr_chunk *)chunk->chunk_hdr;
- err_hdr = &operr_chunk->err_hdr;
+ while (chunk->chunk_end > chunk->skb->data) {
+ err_hdr = (struct sctp_errhdr *)(chunk->skb->data);
- switch (err_hdr->cause) {
- case SCTP_ERROR_UNKNOWN_CHUNK:
- {
- struct sctp_chunkhdr *unk_chunk_hdr;
+ ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
+ GFP_ATOMIC);
+ if (!ev)
+ return;
- unk_chunk_hdr = (struct sctp_chunkhdr *)err_hdr->variable;
- switch (unk_chunk_hdr->type) {
- /* ADDIP 4.1 A9) If the peer responds to an ASCONF with an
- * ERROR chunk reporting that it did not recognized the ASCONF
- * chunk type, the sender of the ASCONF MUST NOT send any
- * further ASCONF chunks and MUST stop its T-4 timer.
- */
- case SCTP_CID_ASCONF:
- asoc->peer.asconf_capable = 0;
- sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
+ sctp_ulpq_tail_event(&asoc->ulpq, ev);
+
+ switch (err_hdr->cause) {
+ case SCTP_ERROR_UNKNOWN_CHUNK:
+ {
+ sctp_chunkhdr_t *unk_chunk_hdr;
+
+ unk_chunk_hdr = (sctp_chunkhdr_t *)err_hdr->variable;
+ switch (unk_chunk_hdr->type) {
+ /* ADDIP 4.1 A9) If the peer responds to an ASCONF with
+ * an ERROR chunk reporting that it did not recognized
+ * the ASCONF chunk type, the sender of the ASCONF MUST
+ * NOT send any further ASCONF chunks and MUST stop its
+ * T-4 timer.
+ */
+ case SCTP_CID_ASCONF:
+ if (asoc->peer.asconf_capable == 0)
+ break;
+
+ asoc->peer.asconf_capable = 0;
+ sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+ break;
+ default:
+ break;
+ }
break;
+ }
default:
break;
}
- break;
- }
- default:
- break;
}
}
sctp_cmd_seq_t *commands)
{
struct sctp_chunk *chunk = arg;
- struct sctp_ulpevent *ev;
if (!sctp_vtag_verify(chunk, asoc))
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
return sctp_sf_violation_chunklen(ep, asoc, type, arg,
commands);
- while (chunk->chunk_end > chunk->skb->data) {
- ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
- GFP_ATOMIC);
- if (!ev)
- goto nomem;
+ sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
+ SCTP_CHUNK(chunk));
- sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP,
- SCTP_ULPEVENT(ev));
- sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
- SCTP_CHUNK(chunk));
- }
return SCTP_DISPOSITION_CONSUME;
-
-nomem:
- return SCTP_DISPOSITION_NOMEM;
}
/*
freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
- if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff)
+ if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
+ freq_range->max_bandwidth_khz > freq_diff)
return false;
return true;
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.27';
+my $V = '0.28';
use Getopt::Long qw(:config no_auto_abbrev);
__iomem|
__must_check|
__init_refok|
- __kprobes
+ __kprobes|
+ __ref
}x;
our $Attribute = qr{
const|
$realfile =~ s@^([^/]*)/@@;
$p1_prefix = $1;
- if ($tree && $p1_prefix ne '' && -e "$root/$p1_prefix") {
+ if (!$file && $tree && $p1_prefix ne '' &&
+ -e "$root/$p1_prefix") {
WARN("patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n");
}
}
# TEST: allow direct testing of the attribute matcher.
if ($dbg_attr) {
- if ($line =~ /^.\s*$Attribute\s*$/) {
+ if ($line =~ /^.\s*$Modifier\s*$/) {
ERROR("TEST: is attr\n" . $herecurr);
- } elsif ($dbg_attr > 1 && $line =~ /^.+($Attribute)/) {
+ } elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) {
ERROR("TEST: is not attr ($1 is)\n". $herecurr);
}
next;
# * goes on variable not on type
# (char*[ const])
- if ($line =~ m{\($NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)*)\)}) {
+ if ($line =~ m{\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\)}) {
my ($from, $to) = ($1, $1);
# Should start with a space.
if ($from ne $to) {
ERROR("\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr);
}
- } elsif ($line =~ m{\b$NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)?)($Ident)}) {
+ } elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) {
my ($from, $to, $ident) = ($1, $1, $2);
# Should start with a space.
# Modifiers should have spaces.
$to =~ s/(\b$Modifier$)/$1 /;
- #print "from<$from> to<$to>\n";
- if ($from ne $to) {
+ #print "from<$from> to<$to> ident<$ident>\n";
+ if ($from ne $to && $ident !~ /^$Modifier$/) {
ERROR("\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr);
}
}
if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
ERROR("space required before that '$op' $at\n" . $hereptr);
}
- if ($op eq '*' && $cc =~/\s*const\b/) {
+ if ($op eq '*' && $cc =~/\s*$Modifier\b/) {
# A unary '*' may be const
} elsif ($ctx =~ /.xW/) {
- ERROR("space prohibited after that '$op' $at\n" . $hereptr);
+ ERROR("Aspace prohibited after that '$op' $at\n" . $hereptr);
}
# unary ++ and unary -- are allowed no space on one side.
if ($line =~ /\bin_atomic\s*\(/) {
if ($realfile =~ m@^drivers/@) {
ERROR("do not use in_atomic in drivers\n" . $herecurr);
- } else {
+ } elsif ($realfile !~ m@^kernel/@) {
WARN("use of in_atomic() is incorrect outside core kernel code\n" . $herecurr);
}
}
rpm-pkg rpm: $(objtree)/kernel.spec FORCE
$(MAKE) clean
$(PREV) ln -sf $(srctree) $(KERNELPATH)
+ $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
$(PREV) rm $(KERNELPATH)
-
+ rm -f $(objtree)/.scmversion
set -e; \
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
set -e; \
echo ""
echo "%clean"
-echo '#echo -rf $RPM_BUILD_ROOT'
+echo 'rm -rf $RPM_BUILD_ROOT'
echo ""
echo "%files"
echo '%defattr (-, root, root)'
static void error(const char *);
static int findsym(const char *);
static void flushline(bool);
-static Linetype getline(void);
+static Linetype get_line(void);
static Linetype ifeval(const char **);
static void ignoreoff(void);
static void ignoreon(void);
for (;;) {
linenum++;
- lineval = getline();
+ lineval = get_line();
trans_table[ifstate[depth]][lineval]();
debug("process %s -> %s depth %d",
linetype_name[lineval],
* help from skipcomment().
*/
static Linetype
-getline(void)
+get_line(void)
{
const char *cp;
int cursym;
if (!S_ISSOCK(inode->i_mode) ||
((mask & (MAY_WRITE | MAY_APPEND)) == 0))
return 0;
-
sock = SOCKET_I(inode);
sk = sock->sk;
+ if (sk == NULL)
+ return 0;
sksec = sk->sk_security;
- if (sksec->nlbl_state != NLBL_REQUIRE)
+ if (sksec == NULL || sksec->nlbl_state != NLBL_REQUIRE)
return 0;
local_bh_disable();
* looks for host based access restrictions
*
* This version will only be appropriate for really small
- * sets of single label hosts. Because of the masking
- * it cannot shortcut out on the first match. There are
- * numerious ways to address the problem, but none of them
- * have been applied here.
+ * sets of single label hosts.
*
* Returns the label of the far end or NULL if it's not special.
*/
static char *smack_host_label(struct sockaddr_in *sip)
{
struct smk_netlbladdr *snp;
- char *bestlabel = NULL;
struct in_addr *siap = &sip->sin_addr;
- struct in_addr *liap;
- struct in_addr *miap;
- struct in_addr bestmask;
if (siap->s_addr == 0)
return NULL;
- bestmask.s_addr = 0;
-
for (snp = smack_netlbladdrs; snp != NULL; snp = snp->smk_next) {
- liap = &snp->smk_host.sin_addr;
- miap = &snp->smk_mask;
- /*
- * If the addresses match after applying the list entry mask
- * the entry matches the address. If it doesn't move along to
- * the next entry.
- */
- if ((liap->s_addr & miap->s_addr) !=
- (siap->s_addr & miap->s_addr))
- continue;
/*
- * If the list entry mask identifies a single address
- * it can't get any more specific.
+ * we break after finding the first match because
+ * the list is sorted from longest to shortest mask
+ * so we have found the most specific match
*/
- if (miap->s_addr == 0xffffffff)
+ if ((&snp->smk_host.sin_addr)->s_addr ==
+ (siap->s_addr & (&snp->smk_mask)->s_addr)) {
return snp->smk_label;
- /*
- * If the list entry mask is less specific than the best
- * already found this entry is uninteresting.
- */
- if ((miap->s_addr | bestmask.s_addr) == bestmask.s_addr)
- continue;
- /*
- * This is better than any entry found so far.
- */
- bestmask.s_addr = miap->s_addr;
- bestlabel = snp->smk_label;
+ }
}
- return bestlabel;
+ return NULL;
}
/**
return skp;
}
-/*
-#define BEMASK 0x80000000
-*/
-#define BEMASK 0x00000001
#define BEBITS (sizeof(__be32) * 8)
/*
{
struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v;
unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr;
- __be32 bebits;
- int maskn = 0;
+ int maskn;
+ u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr);
- for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1)
- if ((skp->smk_mask.s_addr & bebits) == 0)
- break;
+ for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++);
seq_printf(s, "%u.%u.%u.%u/%d %s\n",
hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label);
return seq_open(file, &netlbladdr_seq_ops);
}
+/**
+ * smk_netlbladdr_insert
+ * @new : netlabel to insert
+ *
+ * This helper insert netlabel in the smack_netlbladdrs list
+ * sorted by netmask length (longest to smallest)
+ */
+static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
+{
+ struct smk_netlbladdr *m;
+
+ if (smack_netlbladdrs == NULL) {
+ smack_netlbladdrs = new;
+ return;
+ }
+
+ /* the comparison '>' is a bit hacky, but works */
+ if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) {
+ new->smk_next = smack_netlbladdrs;
+ smack_netlbladdrs = new;
+ return;
+ }
+ for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) {
+ if (m->smk_next == NULL) {
+ m->smk_next = new;
+ return;
+ }
+ if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) {
+ new->smk_next = m->smk_next;
+ m->smk_next = new;
+ return;
+ }
+ }
+}
+
+
/**
* smk_write_netlbladdr - write() for /smack/netlabel
* @filp: file pointer, not actually used
struct netlbl_audit audit_info;
struct in_addr mask;
unsigned int m;
- __be32 bebits = BEMASK;
+ u32 mask_bits = (1<<31);
__be32 nsa;
+ u32 temp_mask;
/*
* Must have privilege.
if (sp == NULL)
return -EINVAL;
- for (mask.s_addr = 0; m > 0; m--) {
- mask.s_addr |= bebits;
- bebits <<= 1;
+ for (temp_mask = 0; m > 0; m--) {
+ temp_mask |= mask_bits;
+ mask_bits >>= 1;
}
+ mask.s_addr = cpu_to_be32(temp_mask);
+
+ newname.sin_addr.s_addr &= mask.s_addr;
/*
* Only allow one writer at a time. Writes should be
* quite rare and small in any case.
mutex_lock(&smk_netlbladdr_lock);
nsa = newname.sin_addr.s_addr;
+ /* try to find if the prefix is already in the list */
for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next)
if (skp->smk_host.sin_addr.s_addr == nsa &&
skp->smk_mask.s_addr == mask.s_addr)
rc = 0;
skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr;
skp->smk_mask.s_addr = mask.s_addr;
- skp->smk_next = smack_netlbladdrs;
skp->smk_label = sp;
- smack_netlbladdrs = skp;
+ smk_netlbladdr_insert(skp);
}
} else {
rc = netlbl_cfg_unlbl_static_del(&init_net, NULL,
while (dst_frames1 > 0) {
S1 = S2;
if (src_frames1-- > 0) {
- S1 = *src;
+ S2 = *src;
src += src_step;
}
if (pos & ~R_MASK) {
MODULE_PARM_DESC(enable, "Enable Audiowerk2 soundcard.");
static struct pci_device_id snd_aw2_ids[] = {
- {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, PCI_ANY_ID, PCI_ANY_ID,
+ {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, 0, 0,
0, 0, 0},
{0}
};
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
+ .invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
.driver = "Audigy2", .name = "SB Audigy 2 Platinum [SB0240P]",
{
struct snd_hwdep *hwdep = dev_get_drvdata(dev);
struct hda_codec *codec = hwdep->private_data;
- char *p;
- struct hda_verb verb, *v;
+ struct hda_verb *v;
+ int nid, verb, param;
- verb.nid = simple_strtoul(buf, &p, 0);
- verb.verb = simple_strtoul(p, &p, 0);
- verb.param = simple_strtoul(p, &p, 0);
- if (!verb.nid || !verb.verb || !verb.param)
+ if (sscanf(buf, "%i %i %i", &nid, &verb, ¶m) != 3)
+ return -EINVAL;
+ if (!nid || !verb)
return -EINVAL;
v = snd_array_new(&codec->init_verbs);
if (!v)
return -ENOMEM;
- *v = verb;
+ v->nid = nid;
+ v->verb = verb;
+ v->param = param;
return count;
}
SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
+ /* conflict of ALC268 in slot#3 (digital I/O); a temporary fix */
+ SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba laptop", 0x03),
{}
};
case 0x106b3e00: /* iMac 24 Aluminium */
board_config = ALC885_IMAC24;
break;
+ case 0x106b00a0: /* MacBookPro3,1 - Another revision */
case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
case 0x106b00a4: /* MacbookPro4,1 */
case 0x106b2c00: /* Macbook Pro rev3 */
ALC888_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
ALC888_ACER_ASPIRE_4930G),
+ SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
+ ALC888_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x103c, 0x1309, "HP xw4*00", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x130a, "HP xw6*00", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x130b, "HP xw8*00", ALC262_HP_BPC),
+ SND_PCI_QUIRK(0x103c, 0x170b, "HP xw*", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL),
SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF),
SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL),
"LFE Playback Volume",
"Side Playback Volume",
"Headphone Playback Volume",
- "Headphone Playback Volume",
+ "Headphone2 Playback Volume",
"Speaker Playback Volume",
"External Speaker Playback Volume",
"Speaker2 Playback Volume",
"LFE Playback Switch",
"Side Playback Switch",
"Headphone Playback Switch",
- "Headphone Playback Switch",
+ "Headphone2 Playback Switch",
"Speaker Playback Switch",
"External Speaker Playback Switch",
"Speaker2 Playback Switch",
if (! spec->autocfg.line_outs)
return 0; /* can't find valid pin config */
+#if 0 /* FIXME: temporarily disabled */
/* If we have no real line-out pin and multiple hp-outs, HPs should
* be set up as multi-channel outputs.
*/
spec->autocfg.line_out_type = AUTO_PIN_HP_OUT;
spec->autocfg.hp_outs = 0;
}
+#endif /* FIXME: temporarily disabled */
if (spec->autocfg.mono_out_pin) {
int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
(AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
case STAC_DELL_M4_3:
spec->num_dmics = 1;
spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
+ spec->num_dmuxes = 1;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
int capture_chips;
int fw_file_set;
int firmware_num;
- int is_hr_stereo:1;
- int board_has_aes1:1; /* if 1 board has AES1 plug and SRC */
- int board_has_analog:1; /* if 0 the board is digital only */
- int board_has_mic:1; /* if 1 the board has microphone input */
- int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
- int mono_capture:1; /* if 1 the board does mono capture */
+ unsigned int is_hr_stereo:1;
+ unsigned int board_has_aes1:1; /* if 1 board has AES1 plug and SRC */
+ unsigned int board_has_analog:1; /* if 0 the board is digital only */
+ unsigned int board_has_mic:1; /* if 1 the board has microphone input */
+ unsigned int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
+ unsigned int mono_capture:1; /* if 1 the board does mono capture */
struct snd_dma_buffer hostport;
projects / linux-2.6-omap-h63xx.git / commitdiff