]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
ahci: implement SCR_NOTIFICATION r/w
authorTejun Heo <htejun@gmail.com>
Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)
committerJeff Garzik <jeff@garzik.org>
Fri, 20 Jul 2007 12:02:11 +0000 (08:02 -0400)
Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller
supports it.  Also, print "sntf" in the cap line if supported.

While at it, convert eight space into a tab in ahci_print_info().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/ahci.c

index 9475e5619af10036ee2d49deae83f10569118d80..de8bffbf4bd35d968b068761cd0f5cc4e88191bb 100644 (file)
@@ -99,6 +99,7 @@ enum {
        HOST_CAP_SSC            = (1 << 14), /* Slumber capable */
        HOST_CAP_CLO            = (1 << 24), /* Command List Override support */
        HOST_CAP_SSS            = (1 << 27), /* Staggered Spin-up */
+       HOST_CAP_SNTF           = (1 << 29), /* SNotification register */
        HOST_CAP_NCQ            = (1 << 30), /* Native Command Queueing */
        HOST_CAP_64             = (1 << 31), /* PCI DAC (64-bit DMA) support */
 
@@ -113,11 +114,11 @@ enum {
        PORT_TFDATA             = 0x20, /* taskfile data */
        PORT_SIG                = 0x24, /* device TF signature */
        PORT_CMD_ISSUE          = 0x38, /* command issue */
-       PORT_SCR                = 0x28, /* SATA phy register block */
        PORT_SCR_STAT           = 0x28, /* SATA phy register: SStatus */
        PORT_SCR_CTL            = 0x2c, /* SATA phy register: SControl */
        PORT_SCR_ERR            = 0x30, /* SATA phy register: SError */
        PORT_SCR_ACT            = 0x34, /* SATA phy register: SActive */
+       PORT_SCR_NTF            = 0x3c, /* SATA phy register: SNotification */
 
        /* PORT_IRQ_{STAT,MASK} bits */
        PORT_IRQ_COLD_PRES      = (1 << 31), /* cold presence detect */
@@ -631,39 +632,45 @@ static void ahci_restore_initial_config(struct ata_host *host)
        (void) readl(mmio + HOST_PORTS_IMPL);   /* flush */
 }
 
-static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
+static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
 {
-       unsigned int sc_reg;
-
-       switch (sc_reg_in) {
-       case SCR_STATUS:        sc_reg = 0; break;
-       case SCR_CONTROL:       sc_reg = 1; break;
-       case SCR_ERROR:         sc_reg = 2; break;
-       case SCR_ACTIVE:        sc_reg = 3; break;
-       default:
-               return -EINVAL;
-       }
+       static const int offset[] = {
+               [SCR_STATUS]            = PORT_SCR_STAT,
+               [SCR_CONTROL]           = PORT_SCR_CTL,
+               [SCR_ERROR]             = PORT_SCR_ERR,
+               [SCR_ACTIVE]            = PORT_SCR_ACT,
+               [SCR_NOTIFICATION]      = PORT_SCR_NTF,
+       };
+       struct ahci_host_priv *hpriv = ap->host->private_data;
 
-       *val = readl(ap->ioaddr.scr_addr + (sc_reg * 4));
+       if (sc_reg < ARRAY_SIZE(offset) &&
+           (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
+               return offset[sc_reg];
        return 0;
 }
 
-
-static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
+static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
 {
-       unsigned int sc_reg;
-
-       switch (sc_reg_in) {
-       case SCR_STATUS:        sc_reg = 0; break;
-       case SCR_CONTROL:       sc_reg = 1; break;
-       case SCR_ERROR:         sc_reg = 2; break;
-       case SCR_ACTIVE:        sc_reg = 3; break;
-       default:
-               return -EINVAL;
+       void __iomem *port_mmio = ahci_port_base(ap);
+       int offset = ahci_scr_offset(ap, sc_reg);
+
+       if (offset) {
+               *val = readl(port_mmio + offset);
+               return 0;
        }
+       return -EINVAL;
+}
 
-       writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
-       return 0;
+static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
+{
+       void __iomem *port_mmio = ahci_port_base(ap);
+       int offset = ahci_scr_offset(ap, sc_reg);
+
+       if (offset) {
+               writel(val, port_mmio + offset);
+               return 0;
+       }
+       return -EINVAL;
 }
 
 static void ahci_start_engine(struct ata_port *ap)
@@ -1768,12 +1775,13 @@ static void ahci_print_info(struct ata_host *host)
 
        dev_printk(KERN_INFO, &pdev->dev,
                "flags: "
-               "%s%s%s%s%s%s"
-               "%s%s%s%s%s%s%s\n"
+               "%s%s%s%s%s%s%s"
+               "%s%s%s%s%s%s%s\n"
                ,
 
                cap & (1 << 31) ? "64bit " : "",
                cap & (1 << 30) ? "ncq " : "",
+               cap & (1 << 29) ? "sntf " : "",
                cap & (1 << 28) ? "ilck " : "",
                cap & (1 << 27) ? "stag " : "",
                cap & (1 << 26) ? "pm " : "",
@@ -1842,10 +1850,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                void __iomem *port_mmio = ahci_port_base(ap);
 
                /* standard SATA port setup */
-               if (hpriv->port_map & (1 << i)) {
+               if (hpriv->port_map & (1 << i))
                        ap->ioaddr.cmd_addr = port_mmio;
-                       ap->ioaddr.scr_addr = port_mmio + PORT_SCR;
-               }
 
                /* disabled/not-implemented port */
                else