pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
int nents, int direction)
-Maps a scatter gather list from the block layer.
-
Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
Please note that the sg cannot be mapped again if it has been mapped once.
The mapping process is allowed to destroy information in the sg.
1.3 sparc64
1.4 ppc
1.5 SuperH
+1.6 Blackfin
2. "Policy" / "Governor"?
2.1 Policy
SH-3
SH-4
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
2. "Policy" / "Governor" ?
==========================
Caveats
=======
Features which OCFS2 does not support yet:
- - extended attributes
- quotas
- - cluster aware flock
- - cluster aware lockf
- Directory change notification (F_NOTIFY)
- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
- POSIX ACLs
2.14 /proc/<pid>/io - Display the IO accounting fields
2.15 /proc/<pid>/coredump_filter - Core dump filtering settings
2.16 /proc/<pid>/mountinfo - Information about mounts
+ 2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
------------------------------------------------------------------------------
Preface
Documentation/filesystems/sharedsubtree.txt
+2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for max_user_watches is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
------------------------------------------------------------------------------
+
archive and links it into the resulting kernel binary. By default, this
archive is empty (consuming 134 bytes on x86).
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary. This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary. This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
dir /dev 755 0 0
nod /dev/console 644 0 0 c 5 1
static struct input_dev *button_dev;
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
{
input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
input_sync(button_dev);
+ return IRQ_HANDLED;
}
static int __init button_init(void)
ref Reference board
dell-m4-1 Dell desktops
dell-m4-2 Dell desktops
+ dell-m4-3 Dell desktops
STAC92HD73*
ref Reference board
- dell-m6 Dell desktops
+ dell-m6-amic Dell desktops/laptops with analog mics
+ dell-m6-dmic Dell desktops/laptops with digital mics
+ dell-m6 Dell desktops/laptops with both type of mics
STAC9872
vaio Setup for VAIO FE550G/SZ110
/* if your mach-* infrastructure doesn't support kernels that can
* run on multiple boards, pdata wouldn't benefit from "__init".
*/
- static struct mysoc_spi_data __init pdata = { ... };
+ static struct mysoc_spi_data __initdata pdata = { ... };
static __init board_init(void)
{
$ cat /debug/tracing/trace_pipe > mydump.txt &
Start X or whatever.
$ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
Check for lost events.
do.
Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
pressing ctrl+c.
$ cat /debug/tracing/trace_entries
gives you a number. Approximately double this number and write it back, for
instance:
+$ echo 0 > /debug/tracing/tracing_enabled
$ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
-EXTRAVERSION = -rc6
-NAME = Killer Bat of Doom
+EXTRAVERSION = -rc7
+NAME = Erotic Pickled Herring
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
-# arch_ptrace() and not #define __ARCH_SYS_PTRACE
-# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
return PCI_SLOT(dev->devfn);
}
-void __devinit
+void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{
/*
* Where secondaries begin a life of C.
*/
-void __init
+void __cpuinit
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
* Send a message to a secondary's console. "START" is one such
* interesting message. ;-)
*/
-static void __init
+static void __cpuinit
send_secondary_console_msg(char *str, int cpuid)
{
struct percpu_struct *cpu;
/*
* Convince the console to have a secondary cpu begin execution.
*/
-static int __init
+static int __cpuinit
secondary_cpu_start(int cpuid, struct task_struct *idle)
{
struct percpu_struct *cpu;
static int opDEC_fix;
-static void __init
+static void __cpuinit
opDEC_check(void)
{
__asm__ __volatile__ (
return;
}
-void __init
+void __cpuinit
trap_init(void)
{
/* Tell PAL-code what global pointer we want in the kernel. */
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
+ select CPU_ARM920T
select ARM_AMBA
select HAVE_CLK
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
-config ARCH_CLPS7500
- bool "Cirrus CL-PS7500FE"
- select TIMER_ACORN
- select ISA
- select NO_IOPORT
- select ARCH_SPARSEMEM_ENABLE
- help
- Support for the Cirrus Logic PS7500FE system-on-a-chip.
-
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
+ select CPU_ARM720T
help
Support for Cirrus Logic 711x/721x based boards.
config ARCH_EBSA110
bool "EBSA-110"
+ select CPU_SA110
select ISA
select NO_IOPORT
help
config ARCH_EP93XX
bool "EP93xx-based"
+ select CPU_ARM920T
select ARM_AMBA
select ARM_VIC
select GENERIC_GPIO
select HAVE_CLK
+ select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
config ARCH_FOOTBRIDGE
bool "FootBridge"
+ select CPU_SA110
select FOOTBRIDGE
help
Support for systems based on the DC21285 companion chip
config ARCH_NETX
bool "Hilscher NetX based"
+ select CPU_ARM926T
select ARM_VIC
help
This enables support for systems based on the Hilscher NetX Soc
config ARCH_H720X
bool "Hynix HMS720x-based"
+ select CPU_ARM720T
select ISA_DMA_API
help
This enables support for systems based on the Hynix HMS720x
config ARCH_IMX
bool "IMX"
+ select CPU_ARM920T
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
+ select CPU_XSC3
select PLAT_IOP
select PCI
select ARCH_SUPPORTS_MSI
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
+ select CPU_XSCALE
select PLAT_IOP
select PCI
select GENERIC_GPIO
config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
+ select CPU_XSCALE
select PLAT_IOP
select PCI
select GENERIC_GPIO
config ARCH_IXP23XX
bool "IXP23XX-based"
depends on MMU
+ select CPU_XSC3
select PCI
help
Support for Intel's IXP23xx (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
depends on MMU
+ select CPU_XSCALE
select PCI
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
+ select CPU_XSCALE
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_L7200
bool "LinkUp-L7200"
+ select CPU_ARM720T
select FIQ
help
Say Y here if you intend to run this kernel on a LinkUp Systems
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
+ select CPU_FEROCEON
select PCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
+ select CPU_ARM922T
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
+ select CPU_ARM926T
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
+ select CPU_FEROCEON
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
config ARCH_MV78XX0
bool "Marvell MV78xx0"
+ select CPU_FEROCEON
select PCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
+ select CPU_FEROCEON
select PCI
select GENERIC_GPIO
select GENERIC_TIME
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
+ select CPU_ARM926T
select HAVE_CLK
help
This enables support for Philips PNX4008 mobile platform.
config ARCH_SA1100
bool "SA1100-based"
+ select CPU_SA1100
select ISA
select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP
config ARCH_SHARK
bool "Shark"
+ select CPU_SA110
select ISA
select ISA_DMA
select ZONE_DMA
config ARCH_LH7A40X
bool "Sharp LH7A40X"
+ select CPU_ARM922T
select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
help
config ARCH_DAVINCI
bool "TI DaVinci"
+ select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
config ARCH_MSM
bool "Qualcomm MSM"
+ select CPU_V6
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
interface to the ARM9 modem processor which runs the baseband stack
and controls some vital subsystems (clock and power control, etc).
+config ARCH_W90X900
+ bool "Nuvoton W90X900 CPU"
+ select CPU_ARM926T
+ help
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+ can login www.mcuos.com or www.nuvoton.com to know more.
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-msm/Kconfig"
+source "arch/arm/mach-w90x900/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+ depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
default y
help
Enable support for local timers on SMP platforms, rather then the
tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
ifeq ($(CONFIG_AEABI),y)
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
- machine-$(CONFIG_ARCH_CLPS7500) := clps7500
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
+ machine-$(CONFIG_ARCH_W90X900) := w90x900
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
OBJS += head-l7200.o
endif
-ifeq ($(CONFIG_ARCH_CLPS7500),y)
-HEAD = head-clps7500.o
-endif
-
ifeq ($(CONFIG_ARCH_P720T),y)
# Borrow this code from SA1100
OBJS += head-sa1100.o
+++ /dev/null
-/*
- * linux/arch/arm/boot/compressed/head-clps7500.S
- *
- * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
- */
-
-
- /* There are three different ways the kernel can be
- booted on a 7500 system: from Angel (loaded in RAM), from
- 16-bit ROM or from 32-bit Flash. Luckily, a single kernel
- image does for them all. */
- /* This branch is taken if the CPU memory width matches the
- actual device in use. The default at power on is 16 bits
- so we must be prepared for a mismatch. */
- .section ".start", "ax"
-2:
- b 1f
- .word 0xffff
- .word 0xb632 @ mov r11, #0x03200000
- .word 0xe3a0
- .word 0x0000 @ mov r0, #0
- .word 0xe3a0
- .word 0x0080 @ strb r0, [r11, #0x80]
- .word 0xe5cb
- .word 0xf000 @ mov pc, #0
- .word 0xe3a0
-1:
- adr r1, 2b
- teq r1, #0
- bne .Langel
- /* This is a direct-from-ROM boot. Copy the kernel into
- RAM and run it there. */
- mov r0, #0x30
- mcr p15, 0, r0, c1, c0, 0
- mov r0, #0x13
- msr cpsr_cxsf, r0
- mov r12, #0x03000000 @ point to LEDs
- orr r12, r12, #0x00020000
- orr r12, r12, #0xba00
- mov r0, #0x5500
- str r0, [r12]
- mov r0, #0x10000000
- orr r0, r0, #0x8000
- mov r4, r0
- ldr r2, =_end
-2:
- ldr r3, [r1], #4
- str r3, [r0], #4
- teq r0, r2
- bne 2b
- mov r0, #0xff00
- str r0, [r12]
-1:
- mov r12, #0x03000000 @ point to LEDs
- orr r12, r12, #0x00020000
- orr r12, r12, #0xba00
- mov r0, #0xfe00
- str r0, [r12]
-
- adr lr, 1f
- mov r0, #0
- mov r1, #14 /* MACH_TYPE_CLPS7500 */
- mov pc, lr
-.Langel:
-#ifdef CONFIG_ANGELBOOT
- /* Call Angel to switch into SVC mode. */
- mov r0, #0x17
- swi 0x123456
-#endif
- /* Ensure all interrupts are off and MMU disabled */
- mrs r0, cpsr
- orr r0, r0, #0xc0
- msr cpsr_cxsf, r0
-
- adr lr, 1b
- orr lr, lr, #0x10000000
- mov r0, #0x30 @ MMU off
- mcr p15, 0, r0, c1, c0, 0
- mov r0, r0
- mov pc, lr
-
- .ltorg
-
-1:
-/* And the rest */
-#include "head.S"
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
+ .word 0x56056930
+ .word 0xff0ffff0 @ PXA935
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
+
.word 0x56050000 @ Feroceon
.word 0xff0f0000
b __armv4_mmu_cache_on
bl __armv7_mmu_cache_flush
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC
+ mcr p15, 0, r0, c7, c10, 4 @ DSB
+ mcr p15, 0, r0, c7, c5, 4 @ ISB
mov pc, r12
__arm6_mmu_cache_off:
__armv7_mmu_cache_flush:
mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1
tst r10, #0xf << 16 @ hierarchical cache (ARMv7)
- beq hierarchical
mov r10, #0
+ beq hierarchical
mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D
b iflush
hierarchical:
- stmfd sp!, {r0-r5, r7, r9-r11}
+ mcr p15, 0, r10, c7, c10, 5 @ DMB
+ stmfd sp!, {r0-r5, r7, r9, r11}
mrc p15, 1, r0, c0, c0, 1 @ read clidr
ands r3, r0, #0x7000000 @ extract loc from clidr
mov r3, r3, lsr #23 @ left align loc bit field
cmp r3, r10
bgt loop1
finished:
+ ldmfd sp!, {r0-r5, r7, r9, r11}
mov r10, #0 @ swith back to cache level 0
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
- ldmfd sp!, {r0-r5, r7, r9-r11}
iflush:
+ mcr p15, 0, r10, c7, c10, 4 @ DSB
mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB
- mcr p15, 0, r10, c7, c10, 4 @ drain WB
+ mcr p15, 0, r10, c7, c10, 4 @ DSB
+ mcr p15, 0, r10, c7, c5, 4 @ ISB
mov pc, lr
__armv5tej_mmu_cache_flush:
#define __ptr_t void *
+#define memzero(s,n) __memzero(s,n)
+
/*
* Optimised C version of memzero for the ARM.
*/
locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
spin_unlock_irqrestore(&lchip->lock, flags);
}
+EXPORT_SYMBOL(locomo_frontlight_set);
/*
* LoCoMo "Register Access Bus."
# CONFIG_MACH_AKITA is not set
# CONFIG_MACH_SPITZ is not set
# CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc6
+# Tue Sep 16 16:13:48 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_MACH_H5000=y
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_IWMMXT is not set
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="keepinitrd"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=y
+CONFIG_USB_PXA25X_SMALL=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Sun Jun 22 15:51:25 2008
+# Linux kernel version: 2.6.28-rc7
+# Thu Dec 4 15:27:39 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
+# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
#
# Marvell Kirkwood Implementations
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
#
# Bus support
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
+CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
-CONFIG_RTC_DRV_MV=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_MV=y
CONFIG_DMADEVICES=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
#
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Thu May 25 15:42:51 2006
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Fri Dec 5 10:30:27 2008
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91 is not set
-CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
#
# Kendin/Micrel KS8695 Implementations
#
CONFIG_MACH_KS8695=y
-# CONFIG_MACH_DSM320 is not set
-# CONFIG_MACH_CM4002 is not set
-# CONFIG_MACH_CM4008 is not set
-# CONFIG_MACH_CM40xx is not set
-# CONFIG_MACH_LITE300 is not set
-# CONFIG_MACH_SE4200 is not set
-# CONFIG_MACH_MANGA_KS8695 is not set
+CONFIG_MACH_DSM320=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
#
CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
#
# Kernel Features
#
+# CONFIG_TICK_ONESHOT is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
#
# Floating point emulation
#
# At least one emulation must be selected
#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_ARM_KS8695_ETHER=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_PRISM54=m
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
+# CONFIG_WATCHDOG is not set
#
-# LED devices
+# Sonics Silicon Backplane
#
-# CONFIG_NEW_LEDS is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
#
-# LED Triggers
+# Multimedia devices
#
#
-# Multimedia devices
+# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Console display driver support
+# Display device support
#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
-# Real Time Clock
+# Voltage and Current regulators
#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
#
-# Cryptographic options
+# Ciphers
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
-# Hardware crypto devices
+# Compression
#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc1
+# Tue Jul 29 10:46:54 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9263 Board Type
+#
+# CONFIG_MACH_AT91SAM9263EK is not set
+# CONFIG_MACH_USB_A9263 is not set
+CONFIG_MACH_NEOCORE926=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_ATMEL_PWM is not set
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3
-# Wed Oct 25 14:12:00 2006
+# Linux kernel version: 2.6.28-rc2
+# Mon Nov 10 14:41:47 2008
#
CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
#
# RealView platform type
#
CONFIG_MACH_REALVIEW_EB=y
-CONFIG_REALVIEW_MPCORE=y
+# CONFIG_REALVIEW_EB_A9MP is not set
+CONFIG_REALVIEW_EB_ARM11MP=y
+# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
+CONFIG_MACH_REALVIEW_PB11MP=y
+# CONFIG_MACH_REALVIEW_PB1176 is not set
+# CONFIG_MACH_REALVIEW_PBA8 is not set
+CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y
#
# Processor Type
# CONFIG_CPU_ARM926T is not set
CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
+# CONFIG_CPU_V7 is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
CONFIG_ARM_GIC=y
CONFIG_ICST307=y
# Bus support
#
CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
CONFIG_LOCAL_TIMERS=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
# At least one emulation must be selected
#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# LED devices
+# Sonics Silicon Backplane
#
-# CONFIG_NEW_LEDS is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_WM8400 is not set
#
-# LED Triggers
+# Multimedia devices
#
#
-# Multimedia devices
+# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
CONFIG_FB_ARMCLCD=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_ARMAACI=m
-
-#
-# Open Sound System
-#
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_ARMAACI=y
+# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# Real Time Clock
+# MMC/SD/SDIO Card Drivers
#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# RTC interfaces
+# MMC/SD/SDIO Host Controller Drivers
#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
-# RTC drivers
+# Voltage and Current regulators
#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_PL031=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
#
# File systems
#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-# CONFIG_INOTIFY_USER is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_RWSEMS=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
#
-# Cryptographic options
+# Random Number Generation
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Sep 29 14:50:10 2005
+# Linux kernel version: 2.6.28-rc2
+# Mon Nov 10 14:39:48 2008
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
+CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+CONFIG_ARCH_REALVIEW=y
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
#
# RealView platform type
#
CONFIG_MACH_REALVIEW_EB=y
+# CONFIG_REALVIEW_EB_A9MP is not set
+CONFIG_REALVIEW_EB_ARM11MP=y
+# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
+CONFIG_MACH_REALVIEW_PB11MP=y
+CONFIG_MACH_REALVIEW_PB1176=y
+# CONFIG_MACH_REALVIEW_PBA8 is not set
#
# Processor Type
#
CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-# CONFIG_CPU_V6 is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
+# CONFIG_CPU_ARM926T is not set
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+# CONFIG_CPU_V7 is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
CONFIG_ARM_GIC=y
CONFIG_ICST307=y
# Bus support
#
CONFIG_ARM_AMBA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_SMP is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
# At least one emulation must be selected
#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_VFP is not set
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# Hardware Monitoring support
+# Sonics Silicon Backplane
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_WM8400 is not set
#
-# Multimedia Capabilities Port drivers
+# Multimedia devices
#
#
-# Multimedia devices
+# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
CONFIG_FB_ARMCLCD=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_ARMAACI is not set
-
-#
-# Open Sound System
-#
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_ARMAACI=y
+# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# USB support
+# MMC/SD/SDIO Card Drivers
#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# USB Gadget Support
+# MMC/SD/SDIO Host Controller Drivers
#
-# CONFIG_USB_GADGET is not set
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
-# MMC/SD Card support
+# Voltage and Current regulators
#
-# CONFIG_MMC is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
-# Cryptographic options
+# Compression
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
#
-# Hardware crypto devices
+# Random Number Generation
#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#ifndef _ASMARM_CACHEFLUSH_H
#define _ASMARM_CACHEFLUSH_H
-#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/glue.h>
#include <asm/shmparam.h>
+#include <asm/cachetype.h>
#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
#endif
-/*
- * flush_cache_vmap() is used when creating mappings (eg, via vmap,
- * vmalloc, ioremap etc) in kernel space for pages. Since the
- * direct-mappings of these pages may contain cached data, we need
- * to do a full cache flush to ensure that writebacks don't corrupt
- * data placed into these pages via the new mappings.
- */
-#define flush_cache_vmap(start, end) flush_cache_all()
-#define flush_cache_vunmap(start, end) flush_cache_all()
-
/*
* Copy user data from/to a page which is mapped into a different
* processes address space. Really, we want to allow our "user
dmac_inv_range(start, start + size);
}
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT
+ * caches, since the direct-mappings of these pages may contain cached
+ * data, we need to do a full cache flush to ensure that writebacks
+ * don't corrupt data placed into these pages via the new mappings.
+ */
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+ if (!cache_is_vipt_nonaliasing())
+ flush_cache_all();
+ else
+ /*
+ * set_pte_at() called from vmap_pte_range() does not
+ * have a DSB after cleaning the cache line.
+ */
+ dsb();
+}
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+ if (!cache_is_vipt_nonaliasing())
+ flush_cache_all();
+}
+
#endif
*/
static inline int dma_supported(struct device *dev, u64 mask)
{
- return dev->dma_mask && *dev->dma_mask != 0;
+ if (mask < ISA_DMA_THRESHOLD)
+ return 0;
+ return 1;
}
static inline int dma_set_mask(struct device *dev, u64 dma_mask)
#ifndef __ASM_ARM_DMA_H
#define __ASM_ARM_DMA_H
-typedef unsigned int dmach_t;
-
-#include <linux/spinlock.h>
-#include <asm/system.h>
-#include <asm/scatterlist.h>
-#include <mach/dma.h>
+#include <asm/memory.h>
/*
* This is the maximum virtual address which can be DMA'd from.
#define MAX_DMA_ADDRESS 0xffffffff
#endif
+#ifdef CONFIG_ISA_DMA_API
+/*
+ * This is used to support drivers written for the x86 ISA DMA API.
+ * It should not be re-used except for that purpose.
+ */
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/scatterlist.h>
+
+typedef unsigned int dmach_t;
+
+#include <mach/isa-dma.h>
+
/*
* DMA modes
*/
#define isa_dma_bridge_buggy (0)
#endif
-#endif /* _ARM_DMA_H */
+#endif /* CONFIG_ISA_DMA_API */
+
+#endif /* __ASM_ARM_DMA_H */
#define IOMD_KARTRX (0x004)
#define IOMD_KCTRL (0x008)
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_IOLINES (0x00C)
-#endif
-
#define IOMD_IRQSTATA (0x010)
#define IOMD_IRQREQA (0x014)
#define IOMD_IRQCLRA (0x014)
#define IOMD_IRQMASKA (0x018)
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_SUSMODE (0x01C)
-#endif
-
#define IOMD_IRQSTATB (0x020)
#define IOMD_IRQREQB (0x024)
#define IOMD_IRQMASKB (0x028)
#define IOMD_FIQREQ (0x034)
#define IOMD_FIQMASK (0x038)
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_CLKCTL (0x03C)
-#endif
-
#define IOMD_T0CNTL (0x040)
#define IOMD_T0LTCHL (0x040)
#define IOMD_T0CNTH (0x044)
#define IOMD_T1GO (0x058)
#define IOMD_T1LATCH (0x05c)
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_IRQSTATC (0x060)
-#define IOMD_IRQREQC (0x064)
-#define IOMD_IRQMASKC (0x068)
-
-#define IOMD_VIDMUX (0x06c)
-
-#define IOMD_IRQSTATD (0x070)
-#define IOMD_IRQREQD (0x074)
-#define IOMD_IRQMASKD (0x078)
-#endif
-
#define IOMD_ROMCR0 (0x080)
#define IOMD_ROMCR1 (0x084)
#ifdef CONFIG_ARCH_RPC
#define IOMD_MOUSEY (0x0A4)
#endif
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_MSEDAT (0x0A8)
-#define IOMD_MSECTL (0x0Ac)
-#endif
-
#ifdef CONFIG_ARCH_RPC
#define IOMD_DMATCR (0x0C0)
#endif
#ifdef CONFIG_ARCH_RPC
#define IOMD_DMAEXT (0x0CC)
#endif
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_ASTCR (0x0CC)
-#define IOMD_DRAMCR (0x0D0)
-#define IOMD_SELFREF (0x0D4)
-#define IOMD_ATODICR (0x0E0)
-#define IOMD_ATODSR (0x0E4)
-#define IOMD_ATODCC (0x0E8)
-#define IOMD_ATODCNT1 (0x0EC)
-#define IOMD_ATODCNT2 (0x0F0)
-#define IOMD_ATODCNT3 (0x0F4)
-#define IOMD_ATODCNT4 (0x0F8)
-#endif
#ifdef CONFIG_ARCH_RPC
#define DMA_EXT_IO0 1
#define HWCAP_IWMMXT 512
#define HWCAP_CRUNCH 1024
#define HWCAP_THUMBEE 2048
+#define HWCAP_NEON 4096
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
/*
*/
extern void __readwrite_bug(const char *fn);
+/*
+ * A typesafe __io() helper
+ */
+static inline void __iomem *__typesafe_io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+
/*
* Now, pick up the machine-defined IO definitions
*/
#define irq_canonicalize(i) (i)
#endif
-#ifndef NR_IRQS
-#define NR_IRQS 128
-#endif
-
/*
* Use this value to indicate lack of interrupt
* capability
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
-#ifndef __virt_to_phys
#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
/*
* Convert a physical address to a Page Frame Number and back
* memory. Use of these is *deprecated* (and that doesn't mean
* use the __ prefixed forms instead.) See dma-mapping.h.
*/
+#ifndef __virt_to_bus
+#define __virt_to_bus __virt_to_phys
+#define __bus_to_virt __phys_to_virt
+#endif
+
static inline __deprecated unsigned long virt_to_bus(void *x)
{
return __virt_to_bus((unsigned long)x);
#define __ASM_ARM_MMU_CONTEXT_H
#include <linux/compiler.h>
+#include <linux/sched.h>
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
#include <asm/proc-fns.h>
#ifndef __ARM_MTD_XIP_H__
#define __ARM_MTD_XIP_H__
-#include <mach/hardware.h>
#include <mach/mtd-xip.h>
/* fill instruction prefetch */
#error Unknown user operations model
#endif
+struct page;
+
struct cpu_user_fns {
- void (*cpu_clear_user_page)(void *p, unsigned long user);
- void (*cpu_copy_user_page)(void *to, const void *from,
- unsigned long user);
+ void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
+ void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
+ unsigned long vaddr);
};
#ifdef MULTI_USER
extern struct cpu_user_fns cpu_user;
-#define __cpu_clear_user_page cpu_user.cpu_clear_user_page
-#define __cpu_copy_user_page cpu_user.cpu_copy_user_page
+#define __cpu_clear_user_highpage cpu_user.cpu_clear_user_highpage
+#define __cpu_copy_user_highpage cpu_user.cpu_copy_user_highpage
#else
-#define __cpu_clear_user_page __glue(_USER,_clear_user_page)
-#define __cpu_copy_user_page __glue(_USER,_copy_user_page)
+#define __cpu_clear_user_highpage __glue(_USER,_clear_user_highpage)
+#define __cpu_copy_user_highpage __glue(_USER,_copy_user_highpage)
-extern void __cpu_clear_user_page(void *p, unsigned long user);
-extern void __cpu_copy_user_page(void *to, const void *from,
- unsigned long user);
+extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
+extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr);
#endif
-#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr)
-#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
+#define clear_user_highpage(page,vaddr) \
+ __cpu_clear_user_highpage(page, vaddr)
+
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+#define copy_user_highpage(to,from,vaddr,vma) \
+ __cpu_copy_user_highpage(to, from, vaddr)
-#define clear_page(page) memzero((void *)(page), PAGE_SIZE)
+#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
#undef STRICT_MM_TYPECHECKS
({ \
unsigned long *stack = (unsigned long *)sp; \
set_fs(USER_DS); \
- memzero(regs->uregs, sizeof(regs->uregs)); \
+ memset(regs->uregs, 0, sizeof(regs->uregs)); \
if (current->personality & ADDR_LIMIT_32BIT) \
regs->ARM_cpsr = USR_MODE; \
else \
struct membank bank[NR_BANKS];
};
+extern struct meminfo meminfo;
+
#define for_each_nodebank(iter,mi,no) \
- for (iter = 0; iter < mi->nr_banks; iter++) \
- if (mi->bank[iter].node == no)
+ for (iter = 0; iter < (mi)->nr_banks; iter++) \
+ if ((mi)->bank[iter].node == no)
#define bank_pfn_start(bank) __phys_to_pfn((bank)->start)
#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size)
/*
* Stop a local timer interrupt.
*/
-extern void local_timer_stop(unsigned int cpu);
+extern void local_timer_stop(void);
/*
* Platform provides this to acknowledge a local timer IRQ
#else
-static inline void local_timer_stop(unsigned int cpu)
+static inline void local_timer_stop(void)
{
}
/*
* Setup a local timer interrupt for a CPU.
*/
-extern void local_timer_setup(unsigned int cpu);
+extern void local_timer_setup(void);
/*
* show local interrupt info
#define __HAVE_ARCH_MEMCHR
extern void * memchr(const void *, int, __kernel_size_t);
-#define __HAVE_ARCH_MEMZERO
#define __HAVE_ARCH_MEMSET
extern void * memset(void *, int, __kernel_size_t);
(__p); \
})
-#define memzero(p,n) \
- ({ \
- void *__p = (p); size_t __n = n; \
- if ((__n) != 0) \
- __memzero((__p),(__n)); \
- (__p); \
- })
-
#endif
#ifdef __KERNEL__
-#include <asm/memory.h>
-
#define CPU_ARCH_UNKNOWN 0
#define CPU_ARCH_ARMv3 1
#define CPU_ARCH_ARMv4 2
/*
* User space memory access functions
*/
-#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/thread_info.h>
#include <asm/errno.h>
#include <asm/memory.h>
#include <asm/domain.h>
if (access_ok(VERIFY_READ, from, n))
n = __copy_from_user(to, from, n);
else /* security hole - plug it */
- memzero(to, n);
+ memset(to, 0, n);
return n;
}
* published by the Free Software Foundation.
*/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/cryptohash.h>
#include <linux/delay.h>
__switch_data:
.long __mmap_switched
.long __data_loc @ r4
- .long __data_start @ r5
+ .long _data @ r5
.long __bss_start @ r6
.long _end @ r7
.long processor_id @ r4
#include <linux/string.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#ifdef CONFIG_XIP_KERNEL
/*
* MODULES_VADDR is redefined here and not in asm/memory.h to avoid
* recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
*/
-extern void _etext;
#undef MODULES_VADDR
-#define MODULES_VADDR (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
+#define MODULES_VADDR (((unsigned long)_etext + ~PGDIR_MASK) & PGDIR_MASK)
#endif
#ifdef CONFIG_MMU
#include <asm/cputype.h>
#include <asm/elf.h>
#include <asm/procinfo.h>
+#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/cacheflush.h>
__setup("fpe=", fpe_setup);
#endif
-extern void paging_init(struct meminfo *, struct machine_desc *desc);
+extern void paging_init(struct machine_desc *desc);
extern void reboot_setup(char *str);
-extern void _text, _etext, __data_start, _edata, _end;
unsigned int processor_id;
EXPORT_SYMBOL(processor_id);
char elf_platform[ELF_PLATFORM_SIZE];
EXPORT_SYMBOL(elf_platform);
-static struct meminfo meminfo __initdata = { 0, };
static const char *cpu_name;
static const char *machine_name;
static char __initdata command_line[COMMAND_LINE_SIZE];
return list;
}
-static void __init arm_add_memory(unsigned long start, unsigned long size)
+static int __init arm_add_memory(unsigned long start, unsigned long size)
{
- struct membank *bank;
+ struct membank *bank = &meminfo.bank[meminfo.nr_banks];
+
+ if (meminfo.nr_banks >= NR_BANKS) {
+ printk(KERN_CRIT "NR_BANKS too low, "
+ "ignoring memory at %#lx\n", start);
+ return -EINVAL;
+ }
/*
* Ensure that start/size are aligned to a page boundary.
* Size is appropriately rounded down, start is rounded up.
*/
size -= start & ~PAGE_MASK;
-
- bank = &meminfo.bank[meminfo.nr_banks++];
-
bank->start = PAGE_ALIGN(start);
bank->size = size & PAGE_MASK;
bank->node = PHYS_TO_NID(start);
+
+ /*
+ * Check whether this memory region has non-zero size or
+ * invalid node number.
+ */
+ if (bank->size == 0 || bank->node >= MAX_NUMNODES)
+ return -EINVAL;
+
+ meminfo.nr_banks++;
+ return 0;
}
/*
struct resource *res;
int i;
- kernel_code.start = virt_to_phys(&_text);
- kernel_code.end = virt_to_phys(&_etext - 1);
- kernel_data.start = virt_to_phys(&__data_start);
- kernel_data.end = virt_to_phys(&_end - 1);
+ kernel_code.start = virt_to_phys(_text);
+ kernel_code.end = virt_to_phys(_etext - 1);
+ kernel_data.start = virt_to_phys(_data);
+ kernel_data.end = virt_to_phys(_end - 1);
for (i = 0; i < mi->nr_banks; i++) {
if (mi->bank[i].size == 0)
static int __init parse_tag_mem32(const struct tag *tag)
{
- if (meminfo.nr_banks >= NR_BANKS) {
- printk(KERN_WARNING
- "Ignoring memory bank 0x%08x size %dKB\n",
- tag->u.mem.start, tag->u.mem.size / 1024);
- return -EINVAL;
- }
- arm_add_memory(tag->u.mem.start, tag->u.mem.size);
- return 0;
+ return arm_add_memory(tag->u.mem.start, tag->u.mem.size);
}
__tagtable(ATAG_MEM, parse_tag_mem32);
parse_tags(tags);
}
- init_mm.start_code = (unsigned long) &_text;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
- init_mm.brk = (unsigned long) &_end;
+ init_mm.start_code = (unsigned long) _text;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = (unsigned long) _end;
memcpy(boot_command_line, from, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
parse_cmdline(cmdline_p, from);
- paging_init(&meminfo, mdesc);
+ paging_init(mdesc);
request_standard_resources(&meminfo, mdesc);
#ifdef CONFIG_SMP
"java",
"iwmmxt",
"crunch",
+ "thumbee",
+ "neon",
NULL
};
/*
* Stop the local timer for this CPU.
*/
- local_timer_stop(cpu);
+ local_timer_stop();
/*
* Flush user cache and TLB mappings, and then remove this CPU
/*
* Setup local timer for this CPU.
*/
- local_timer_setup(cpu);
+ local_timer_setup();
calibrate_delay();
/*
* Access to the ThumbEE Handler Base register
*/
-static inline unsigned long teehbr_read()
+static inline unsigned long teehbr_read(void)
{
unsigned long v;
asm("mrc p14, 6, %0, c1, c0, 0\n" : "=r" (v));
#endif
.data : AT(__data_loc) {
- __data_start = .; /* address in memory */
+ _data = .; /* address in memory */
/*
* first, the init task union, aligned
endif
lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_CLPS7500) += io-acorn.o
lib-$(CONFIG_ARCH_L7200) += io-acorn.o
lib-$(CONFIG_ARCH_SHARK) += io-shark.o
add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
/*
* The pointer is now aligned and the length is adjusted. Try doing the
- * memzero again.
+ * memset again.
*/
ENTRY(memset)
#
# Common support (must be linked before board specific support)
-obj-y += core.o clock.o
+obj-y += core.o
# Specific board support
obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
+++ /dev/null
-/*
- * linux/arch/arm/mach-aaec2000/clock.c
- *
- * Copyright (C) 2005 Nicolas Bellido Y Ortega
- *
- * Based on linux/arch/arm/mach-integrator/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include "clock.h"
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
-
- mutex_lock(&clocks_mutex);
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_register(struct clk *clk)
-{
- mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
- mutex_unlock(&clocks_mutex);
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- mutex_lock(&clocks_mutex);
- list_del(&clk->node);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-static int __init clk_init(void)
-{
- return 0;
-}
-arch_initcall(clk_init);
+++ /dev/null
-/*
- * linux/arch/arm/mach-aaec2000/clock.h
- *
- * Copyright (C) 2005 Nicolas Bellido Y Ortega
- *
- * Based on linux/arch/arm/mach-integrator/clock.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-
-struct clk {
- struct list_head node;
- unsigned long rate;
- struct module *owner;
- const char *name;
- void *data;
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/signal.h>
+#include <linux/clk.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/map.h>
#include "core.h"
-#include "clock.h"
/*
* Common I/O mapping:
&clcd_device,
};
-static struct clk aaec2000_clcd_clk = {
- .name = "CLCDCLK",
-};
+void clk_disable(struct clk *clk)
+{
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return dev && strcmp(dev_name(dev), "mb:16") == 0 ? NULL : ERR_PTR(-ENOENT);
+}
+
+void clk_put(struct clk *clk)
+{
+}
void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
{
{
int i;
- clk_register(&aaec2000_clcd_clk);
-
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
+++ /dev/null
-/*
- * arch/arm/mach-aaec2000/include/mach/dma.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
#define PHYS_OFFSET UL(0xf0000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* The nodes are the followings:
*
config ARCH_AT91RM9200
bool "AT91RM9200"
+ select CPU_ARM920T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
+ select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_AT91SAM9261
bool "AT91SAM9261"
+ select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_AT91SAM9263
bool "AT91SAM9263"
+ select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
+ select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
+ select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_AT91CAP9
bool "AT91CAP9"
+ select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
+config MACH_NEOCORE926
+ bool "Adeneo NEOCORE926"
+ depends on ARCH_AT91SAM9263
+ help
+ Select this if you are using the Adeneo Neocore 926 board.
+
endif
# ----------------------------------------------------------
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
help
Enable support for the DataFlash card.
# CPU-specific support
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
-obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
+obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+
+#include <mach/cpu.h>
#include <mach/at91cap9.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
/* Register GPIO subsystem */
at91_gpio_init(at91cap9_gpio, 4);
+
+ /* Remember the silicon revision */
+ if (cpu_is_at91cap9_revB())
+ system_rev = 0xB;
+ else if (cpu_is_at91cap9_revC())
+ system_rev = 0xC;
}
/* --------------------------------------------------------------------
*/
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
+#include <mach/cpu.h>
#include <mach/gpio.h>
#include <mach/at91cap9.h>
#include <mach/at91cap9_matrix.h>
if (!data)
return;
+ if (cpu_is_at91cap9_revB())
+ set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
+
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (data->vbus_pin[i])
void __init at91_add_device_usba(struct usba_platform_data *data)
{
- at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
- AT91_MATRIX_UDPHS_BYPASS_LOCK);
+ if (cpu_is_at91cap9_revB()) {
+ set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
+ at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
+ AT91_MATRIX_UDPHS_BYPASS_LOCK);
+ }
+ else
+ at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
/*
* Invalid pins are 0 on AT91, but the usba driver is shared
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
- unsigned long csa, mode;
+ unsigned long csa;
if (!data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
- | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
- | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
-
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
if (!data)
return;
+ if (cpu_is_at91cap9_revB())
+ set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
+
at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
- unsigned long csa, mode;
+ unsigned long csa;
if (!data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
- if (cpu_is_at91sam9260()) {
- /* Timing for sam9260 */
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
- | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
- }
-
- if (cpu_is_at91sam9g20()) {
- /* Timing for sam9g20 */
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4)
- | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(3));
- }
-
/* enable pin */
if (data->enable_pin)
at91_set_gpio_output(data->enable_pin, 1);
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
- unsigned long csa, mode;
+ unsigned long csa;
if (!data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
- | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-
/* enable pin */
if (data->enable_pin)
at91_set_gpio_output(data->enable_pin, 1);
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
- unsigned long csa, mode;
+ unsigned long csa;
if (!data)
return;
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
- | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-
/* enable pin */
if (data->enable_pin)
at91_set_gpio_output(data->enable_pin, 1);
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
- | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
- at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-
/* enable pin */
if (data->enable_pin)
at91_set_gpio_output(data->enable_pin, 1);
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include "sam9_smc.h"
#include "generic.h"
.partition_info = nand_partitions,
};
+static struct sam9_smc_config __initdata cam60_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static void __init cam60_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &cam60_nand_smc_config);
+
+ at91_add_device_nand(&cam60_nand_data);
+}
+
static void __init cam60_board_init(void)
{
at91_set_gpio_output(AT91_PIN_PB18, 1);
at91_add_device_usbh(&cam60_usbh_data);
/* NAND */
- at91_add_device_nand(&cam60_nand_data);
+ cam60_add_device_nand();
}
MACHINE_START(CAM60, "KwikByte CAM60")
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
+#include "sam9_smc.h"
#include "generic.h"
#endif
};
+static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
+ .ncs_read_setup = 1,
+ .nrd_setup = 2,
+ .ncs_write_setup = 1,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 6,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 6,
+ .nwe_pulse = 4,
+
+ .read_cycle = 8,
+ .write_cycle = 8,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 1,
+};
+
+static void __init cap9adk_add_device_nand(void)
+{
+ unsigned long csa;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+ /* setup bus-width (8 or 16) */
+ if (cap9adk_nand_data.bus_width_16)
+ cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &cap9adk_nand_smc_config);
+
+ at91_add_device_nand(&cap9adk_nand_data);
+}
+
/*
* NOR flash
.num_resources = ARRAY_SIZE(nor_flash_resources),
};
+static struct sam9_smc_config __initdata cap9adk_nor_smc_config = {
+ .ncs_read_setup = 2,
+ .nrd_setup = 4,
+ .ncs_write_setup = 2,
+ .nwe_setup = 4,
+
+ .ncs_read_pulse = 10,
+ .nrd_pulse = 8,
+ .ncs_write_pulse = 10,
+ .nwe_pulse = 8,
+
+ .read_cycle = 16,
+ .write_cycle = 16,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
+ .tdf_cycles = 1,
+};
+
static __init void cap9adk_add_device_nor(void)
{
unsigned long csa;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2)
- | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
-
- at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10)
- | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
-
- at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
-
- at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
- | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+ /* configure chip-select 0 (NOR) */
+ sam9_smc_configure(0, &cap9adk_nor_smc_config);
platform_device_register(&cap9adk_nor_flash);
}
/* Serial */
at91_add_device_serial();
/* USB Host */
- set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
at91_add_device_usbh(&cap9adk_usbh_data);
/* USB HS */
- set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
at91_add_device_usba(&cap9adk_usba_udc_data);
/* SPI */
at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
/* Ethernet */
at91_add_device_eth(&cap9adk_macb_data);
/* NAND */
- at91_add_device_nand(&cap9adk_nand_data);
+ cap9adk_add_device_nand();
/* NOR Flash */
cap9adk_add_device_nor();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* LCD Controller */
- set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
at91_add_device_lcdc(&cap9adk_lcdc_data);
/* AC97 */
at91_add_device_ac97(&cap9adk_ac97_data);
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-neocore926.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation
+ * Copyright (C) 2008 ADENEO.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init neocore926_map_io(void)
+{
+ /* Initialize processor: 20 MHz crystal */
+ at91sam9263_initialize(20000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init neocore926_init_irq(void)
+{
+ at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata neocore926_usbh_data = {
+ .ports = 2,
+ .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata neocore926_udc_data = {
+ .vbus_pin = AT91_PIN_PA25,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * ADS7846 Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+ return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+ .model = 7843,
+ .x_min = 150,
+ .x_max = 3830,
+ .y_min = 190,
+ .y_max = 3830,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 450,
+ .y_plate_ohms = 250,
+ .pressure_max = 15000,
+ .debounce_max = 1,
+ .debounce_rep = 0,
+ .debounce_tol = (~0),
+ .get_pendown_state = ads7843_pendown_state,
+};
+
+static void __init neocore926_add_device_ts(void)
+{
+ at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */
+ at91_set_gpio_input(AT91_PIN_PC13, 1); /* Touchscreen BUSY signal */
+}
+#else
+static void __init neocore926_add_device_ts(void) {}
+#endif
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info neocore926_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ {
+ .modalias = "ads7846",
+ .chip_select = 1,
+ .max_speed_hz = 125000 * 16,
+ .bus_num = 0,
+ .platform_data = &ads_info,
+ .irq = AT91SAM9263_ID_IRQ1,
+ },
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata neocore926_mmc_data = {
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PE18,
+ .wp_pin = AT91_PIN_PE19,
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata neocore926_macb_data = {
+ .phy_irq_pin = AT91_PIN_PE31,
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata neocore926_nand_partition[] = {
+ {
+ .name = "Linux Kernel", /* "Partition 1", */
+ .offset = 0,
+ .size = SZ_8M,
+ },
+ {
+ .name = "Filesystem", /* "Partition 2", */
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M,
+ },
+ {
+ .name = "Free", /* "Partition 3", */
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(neocore926_nand_partition);
+ return neocore926_nand_partition;
+}
+
+static struct atmel_nand_data __initdata neocore926_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PB19,
+ .rdy_pin_active_low = 1,
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+};
+
+static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 6,
+ .write_cycle = 6,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static void __init neocore926_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &neocore926_nand_smc_config);
+
+ at91_add_device_nand(&neocore926_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+ .refresh = 60,
+ .xres = 240, .yres = 320,
+ .pixclock = KHZ2PICOS(5000),
+
+ .left_margin = 1, .right_margin = 33,
+ .upper_margin = 1, .lower_margin = 0,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D70VM1CCA",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, on);
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = {
+ .lcdcon_is_backlight = true,
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .guard_time = 1,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB555,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata neocore926_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button neocore926_buttons[] = {
+ { /* BP1, "leftclic" */
+ .code = BTN_LEFT,
+ .gpio = AT91_PIN_PC5,
+ .active_low = 1,
+ .desc = "left_click",
+ .wakeup = 1,
+ },
+ { /* BP2, "rightclic" */
+ .code = BTN_RIGHT,
+ .gpio = AT91_PIN_PC4,
+ .active_low = 1,
+ .desc = "right_click",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data neocore926_button_data = {
+ .buttons = neocore926_buttons,
+ .nbuttons = ARRAY_SIZE(neocore926_buttons),
+};
+
+static struct platform_device neocore926_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &neocore926_button_data,
+ }
+};
+
+static void __init neocore926_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
+ at91_set_deglitch(AT91_PIN_PC5, 1);
+ at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
+ at91_set_deglitch(AT91_PIN_PC4, 1);
+
+ platform_device_register(&neocore926_button_device);
+}
+#else
+static void __init neocore926_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * AC97
+ */
+static struct atmel_ac97_data neocore926_ac97_data = {
+ .reset_pin = AT91_PIN_PA13,
+};
+
+
+static void __init neocore926_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+
+ /* USB Host */
+ at91_add_device_usbh(&neocore926_usbh_data);
+
+ /* USB Device */
+ at91_add_device_udc(&neocore926_udc_data);
+
+ /* SPI */
+ at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */
+ at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices));
+
+ /* Touchscreen */
+ neocore926_add_device_ts();
+
+ /* MMC */
+ at91_add_device_mmc(1, &neocore926_mmc_data);
+
+ /* Ethernet */
+ at91_add_device_eth(&neocore926_macb_data);
+
+ /* NAND */
+ neocore926_add_device_nand();
+
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+
+ /* LCD Controller */
+ at91_add_device_lcdc(&neocore926_lcdc_data);
+
+ /* Push Buttons */
+ neocore926_add_device_buttons();
+
+ /* AC97 */
+ at91_add_device_ac97(&neocore926_ac97_data);
+}
+
+MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
+ /* Maintainer: ADENEO */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = neocore926_map_io,
+ .init_irq = neocore926_init_irq,
+ .init_machine = neocore926_board_init,
+MACHINE_END
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
+#include "sam9_smc.h"
#include "generic.h"
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
/*
* MCI (SD/MMC)
*/
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Ethernet */
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include "sam9_smc.h"
#include "generic.h"
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
/*
* MCI (SD/MMC)
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+#include "sam9_smc.h"
#include "generic.h"
#endif
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
/*
* MCI (SD/MMC)
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+#include "sam9_smc.h"
#include "generic.h"
* DM9000 ethernet device
*/
#if defined(CONFIG_DM9000)
-static struct resource at91sam9261_dm9000_resource[] = {
+static struct resource dm9000_resource[] = {
[0] = {
.start = AT91_CHIPSELECT_2,
.end = AT91_CHIPSELECT_2 + 3,
.flags = DM9000_PLATF_16BITONLY,
};
-static struct platform_device at91sam9261_dm9000_device = {
+static struct platform_device dm9000_device = {
.name = "dm9000",
.id = 0,
- .num_resources = ARRAY_SIZE(at91sam9261_dm9000_resource),
- .resource = at91sam9261_dm9000_resource,
+ .num_resources = ARRAY_SIZE(dm9000_resource),
+ .resource = dm9000_resource,
.dev = {
.platform_data = &dm9000_platdata,
}
};
+/*
+ * SMC timings for the DM9000.
+ * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
+ */
+static struct sam9_smc_config __initdata dm9000_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 8,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 8,
+ .nwe_pulse = 4,
+
+ .read_cycle = 16,
+ .write_cycle = 16,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
+ .tdf_cycles = 1,
+};
+
static void __init ek_add_device_dm9000(void)
{
- /*
- * Configure Chip-Select 2 on SMC for the DM9000.
- * Note: These timings were calculated for MASTER_CLOCK = 100000000
- * according to the DM9000 timings.
- */
- at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
- at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+ /* Configure chip-select 2 (DM9000) */
+ sam9_smc_configure(2, &dm9000_smc_config);
/* Configure Reset signal as output */
at91_set_gpio_output(AT91_PIN_PC10, 0);
/* Configure Interrupt pin as input, no pull-up */
at91_set_gpio_input(AT91_PIN_PC11, 0);
- platform_device_register(&at91sam9261_dm9000_device);
+ platform_device_register(&dm9000_device);
}
#else
static void __init ek_add_device_dm9000(void) {}
#endif
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
/*
* ADS7846 Touchscreen
*/
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* DM9000 ethernet */
ek_add_device_dm9000();
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+#include "sam9_smc.h"
#include "generic.h"
#endif
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
/*
* I2C devices
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LCD Controller */
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include "sam9_smc.h"
#include "generic.h"
#endif
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
/*
* MCI (SD/MMC)
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+#include "sam9_smc.h"
#include "generic.h"
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
.partition_info = nand_partitions,
- .bus_width_16 = 0,
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
/*
* SPI devices
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
+#include "sam9_smc.h"
#include "generic.h"
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
/*
* GPIO Buttons
*/
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Ethernet */
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
+#include "sam9_smc.h"
#include "generic.h"
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
/*
* GPIO Buttons
*/
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
- at91_add_device_nand(&ek_nand_data);
+ ek_add_device_nand();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Push Buttons */
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
+#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
+#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
+#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
+
+#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
+
#endif
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (cpu_is_at91cap9_revB() ? \
+ (0xfffffd50 - AT91_BASE_SYS) : \
+ (0xfffffd60 - AT91_BASE_SYS))
#define AT91_USART0 AT91CAP9_BASE_US0
#define AT91_USART1 AT91CAP9_BASE_US1
return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
}
+#ifdef CONFIG_ARCH_AT91CAP9
+#include <mach/at91_pmc.h>
+
+#define ARCH_REVISION_CAP9_B 0x399
+#define ARCH_REVISION_CAP9_C 0x601
+
+static inline unsigned long at91cap9_rev_identify(void)
+{
+ return (at91_sys_read(AT91_PMC_VER));
+}
+#endif
#ifdef CONFIG_ARCH_AT91RM9200
#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
+#define cpu_is_at91cap9_revC() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_C)
#else
#define cpu_is_at91cap9() (0)
+#define cpu_is_at91cap9_revB() (0)
+#define cpu_is_at91cap9_revC() (0)
#endif
/*
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/dma.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
#define IO_SPACE_LIMIT 0xFFFFFFFF
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#ifndef __ASSEMBLY__
#define PHYS_OFFSET (AT91_SDRAM_BASE)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/sam9_smc.c
+ *
+ * Copyright (C) 2008 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+
+void __init sam9_smc_configure(int cs, struct sam9_smc_config* config)
+{
+ /* Setup register */
+ at91_sys_write(AT91_SMC_SETUP(cs),
+ AT91_SMC_NWESETUP_(config->nwe_setup)
+ | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
+ | AT91_SMC_NRDSETUP_(config->nrd_setup)
+ | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup)
+ );
+
+ /* Pulse register */
+ at91_sys_write(AT91_SMC_PULSE(cs),
+ AT91_SMC_NWEPULSE_(config->nwe_pulse)
+ | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
+ | AT91_SMC_NRDPULSE_(config->nrd_pulse)
+ | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse)
+ );
+
+ /* Cycle register */
+ at91_sys_write(AT91_SMC_CYCLE(cs),
+ AT91_SMC_NWECYCLE_(config->write_cycle)
+ | AT91_SMC_NRDCYCLE_(config->read_cycle)
+ );
+
+ /* Mode register */
+ at91_sys_write(AT91_SMC_MODE(cs),
+ config->mode
+ | AT91_SMC_TDF_(config->tdf_cycles)
+ );
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/sam9_smc.
+ *
+ * Copyright (C) 2008 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct sam9_smc_config {
+ /* Setup register */
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
+
+ /* Pulse register */
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
+
+ /* Cycle register */
+ u16 read_cycle;
+ u16 write_cycle;
+
+ /* Mode register */
+ u32 mode;
+ u8 tdf_cycles:4;
+};
+
+extern void __init sam9_smc_configure(int cs, struct sam9_smc_config* config);
+++ /dev/null
-/*
- * arch/arm/mach-clps711x/include/mach/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
/*
* We don't support ins[lb]/outs[lb]. Make them fault.
*/
#define PHYS_OFFSET UL(0xc0000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-
-#if defined(CONFIG_ARCH_CDB89712)
-
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
-#elif defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
-#else
+#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o
-obj-m :=
-obj-n :=
-obj- :=
-
+++ /dev/null
- zreladdr-y := 0x10008000
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-clps7500/core.c
- *
- * Copyright (C) 1998 Russell King
- * Copyright (C) 1999 Nexus Electronics Ltd
- *
- * Extra MM routines for CL7500 architecture
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-unsigned int vram_size;
-
-static void cl7500_ack_irq_a(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << irq;
- val = iomd_readb(IOMD_IRQMASKA);
- iomd_writeb(val & ~mask, IOMD_IRQMASKA);
- iomd_writeb(mask, IOMD_IRQCLRA);
-}
-
-static void cl7500_mask_irq_a(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << irq;
- val = iomd_readb(IOMD_IRQMASKA);
- iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-}
-
-static void cl7500_unmask_irq_a(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << irq;
- val = iomd_readb(IOMD_IRQMASKA);
- iomd_writeb(val | mask, IOMD_IRQMASKA);
-}
-
-static struct irq_chip clps7500_a_chip = {
- .ack = cl7500_ack_irq_a,
- .mask = cl7500_mask_irq_a,
- .unmask = cl7500_unmask_irq_a,
-};
-
-static void cl7500_mask_irq_b(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_IRQMASKB);
- iomd_writeb(val & ~mask, IOMD_IRQMASKB);
-}
-
-static void cl7500_unmask_irq_b(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_IRQMASKB);
- iomd_writeb(val | mask, IOMD_IRQMASKB);
-}
-
-static struct irq_chip clps7500_b_chip = {
- .ack = cl7500_mask_irq_b,
- .mask = cl7500_mask_irq_b,
- .unmask = cl7500_unmask_irq_b,
-};
-
-static void cl7500_mask_irq_c(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_IRQMASKC);
- iomd_writeb(val & ~mask, IOMD_IRQMASKC);
-}
-
-static void cl7500_unmask_irq_c(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_IRQMASKC);
- iomd_writeb(val | mask, IOMD_IRQMASKC);
-}
-
-static struct irq_chip clps7500_c_chip = {
- .ack = cl7500_mask_irq_c,
- .mask = cl7500_mask_irq_c,
- .unmask = cl7500_unmask_irq_c,
-};
-
-static void cl7500_mask_irq_d(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_IRQMASKD);
- iomd_writeb(val & ~mask, IOMD_IRQMASKD);
-}
-
-static void cl7500_unmask_irq_d(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_IRQMASKD);
- iomd_writeb(val | mask, IOMD_IRQMASKD);
-}
-
-static struct irq_chip clps7500_d_chip = {
- .ack = cl7500_mask_irq_d,
- .mask = cl7500_mask_irq_d,
- .unmask = cl7500_unmask_irq_d,
-};
-
-static void cl7500_mask_irq_dma(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_DMAMASK);
- iomd_writeb(val & ~mask, IOMD_DMAMASK);
-}
-
-static void cl7500_unmask_irq_dma(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_DMAMASK);
- iomd_writeb(val | mask, IOMD_DMAMASK);
-}
-
-static struct irq_chip clps7500_dma_chip = {
- .ack = cl7500_mask_irq_dma,
- .mask = cl7500_mask_irq_dma,
- .unmask = cl7500_unmask_irq_dma,
-};
-
-static void cl7500_mask_irq_fiq(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_FIQMASK);
- iomd_writeb(val & ~mask, IOMD_FIQMASK);
-}
-
-static void cl7500_unmask_irq_fiq(unsigned int irq)
-{
- unsigned int val, mask;
-
- mask = 1 << (irq & 7);
- val = iomd_readb(IOMD_FIQMASK);
- iomd_writeb(val | mask, IOMD_FIQMASK);
-}
-
-static struct irq_chip clps7500_fiq_chip = {
- .ack = cl7500_mask_irq_fiq,
- .mask = cl7500_mask_irq_fiq,
- .unmask = cl7500_unmask_irq_fiq,
-};
-
-static void cl7500_no_action(unsigned int irq)
-{
-}
-
-static struct irq_chip clps7500_no_chip = {
- .ack = cl7500_no_action,
- .mask = cl7500_no_action,
- .unmask = cl7500_no_action,
-};
-
-static struct irqaction irq_isa = {
- .handler = no_action,
- .mask = CPU_MASK_NONE,
- .name = "isa",
-};
-
-static void __init clps7500_init_irq(void)
-{
- unsigned int irq, flags;
-
- iomd_writeb(0, IOMD_IRQMASKA);
- iomd_writeb(0, IOMD_IRQMASKB);
- iomd_writeb(0, IOMD_FIQMASK);
- iomd_writeb(0, IOMD_DMAMASK);
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- flags = IRQF_VALID;
-
- if (irq <= 6 || (irq >= 9 && irq <= 15) ||
- (irq >= 48 && irq <= 55))
- flags |= IRQF_PROBE;
-
- switch (irq) {
- case 0 ... 7:
- set_irq_chip(irq, &clps7500_a_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, flags);
- break;
-
- case 8 ... 15:
- set_irq_chip(irq, &clps7500_b_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, flags);
- break;
-
- case 16 ... 22:
- set_irq_chip(irq, &clps7500_dma_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, flags);
- break;
-
- case 24 ... 31:
- set_irq_chip(irq, &clps7500_c_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, flags);
- break;
-
- case 40 ... 47:
- set_irq_chip(irq, &clps7500_d_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, flags);
- break;
-
- case 48 ... 55:
- set_irq_chip(irq, &clps7500_no_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, flags);
- break;
-
- case 64 ... 72:
- set_irq_chip(irq, &clps7500_fiq_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, flags);
- break;
- }
- }
-
- setup_irq(IRQ_ISA, &irq_isa);
-}
-
-static struct map_desc cl7500_io_desc[] __initdata = {
- { /* IO space */
- .virtual = (unsigned long)IO_BASE,
- .pfn = __phys_to_pfn(IO_START),
- .length = IO_SIZE,
- .type = MT_DEVICE
- }, { /* ISA space */
- .virtual = ISA_BASE,
- .pfn = __phys_to_pfn(ISA_START),
- .length = ISA_SIZE,
- .type = MT_DEVICE
- }, { /* Flash */
- .virtual = CLPS7500_FLASH_BASE,
- .pfn = __phys_to_pfn(CLPS7500_FLASH_START),
- .length = CLPS7500_FLASH_SIZE,
- .type = MT_DEVICE
- }, { /* LED */
- .virtual = LED_BASE,
- .pfn = __phys_to_pfn(LED_START),
- .length = LED_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init clps7500_map_io(void)
-{
- iotable_init(cl7500_io_desc, ARRAY_SIZE(cl7500_io_desc));
-}
-
-extern void ioctime_init(void);
-extern unsigned long ioc_timer_gettimeoffset(void);
-
-static irqreturn_t
-clps7500_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
-
- /* Why not using do_leds interface?? */
- {
- /* Twinkle the lights. */
- static int count, state = 0xff00;
- if (count-- == 0) {
- state ^= 0x100;
- count = 25;
- *((volatile unsigned int *)LED_ADDRESS) = state;
- }
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction clps7500_timer_irq = {
- .name = "CLPS7500 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = clps7500_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt.
- */
-static void __init clps7500_timer_init(void)
-{
- ioctime_init();
- setup_irq(IRQ_TIMER, &clps7500_timer_irq);
-}
-
-static struct sys_timer clps7500_timer = {
- .init = clps7500_timer_init,
- .offset = ioc_timer_gettimeoffset,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = 0x03010fe0,
- .irq = 10,
- .uartclk = 1843200,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
- },
- {
- .mapbase = 0x03010be0,
- .irq = 0,
- .uartclk = 1843200,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
- },
- {
- .iobase = ISASLOT_IO + 0x2e8,
- .irq = 41,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .iobase = ISASLOT_IO + 0x3e8,
- .irq = 40,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static void __init clps7500_init(void)
-{
- platform_device_register(&serial_device);
-}
-
-MACHINE_START(CLPS7500, "CL-PS7500")
- /* Maintainer: Philip Blundell */
- .phys_io = 0x03000000,
- .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc,
- .map_io = clps7500_map_io,
- .init_irq = clps7500_init_irq,
- .init_machine = clps7500_init,
- .timer = &clps7500_timer,
-MACHINE_END
-
+++ /dev/null
-#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119)
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
- struct fb_var_screeninfo *var)
-{
- u_int bandwidth;
-
- vidc->control |= VIDC20_CTRL_PIX_CK;
-
- /* Calculate bandwidth */
- bandwidth = var->pixclock * 8 / var->bits_per_pixel;
-
- /* Encode bandwidth as VIDC20 setting */
- if (bandwidth > 16667*2)
- vidc->control |= VIDC20_CTRL_FIFO_16;
- else if (bandwidth > 13333*2)
- vidc->control |= VIDC20_CTRL_FIFO_20;
- else if (bandwidth > 11111*2)
- vidc->control |= VIDC20_CTRL_FIFO_24;
- else
- vidc->control |= VIDC20_CTRL_FIFO_28;
-
- vidc->pll_ctl = 0x2020;
-}
-
-#ifdef CONFIG_CHRONTEL_7003
-#define acornfb_default_control() VIDC20_CTRL_PIX_HCLK
-#else
-#define acornfb_default_control() VIDC20_CTRL_PIX_VCLK
-#endif
-
-#define acornfb_default_econtrol() VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK
+++ /dev/null
-/* arch/arm/mach-clps7500/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mov \rx, #0xe0000000
- orr \rx, \rx, #0x00010000
- orr \rx, \rx, #0x00000be0
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/dma.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS 0xd0000000
-
-#define DMA_S0 0
-
-#endif /* _ASM_ARCH_DMA_H */
+++ /dev/null
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
- .equ ioc_base_high, IOC_BASE & 0xff000000
- .equ ioc_base_low, IOC_BASE & 0x00ff0000
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #ioc_base_high @ point at IOC
- .if ioc_base_low
- orr \base, \base, #ioc_base_low
- .endif
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- * Copyright (C) 1999 Nexus Electronics Ltd.
- *
- * This file contains the hardware definitions of the
- * CL7500 evaluation board.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/memory.h>
-#include <asm/hardware/iomd.h>
-
-#ifdef __ASSEMBLY__
-#define IOMEM(x) x
-#else
-#define IOMEM(x) ((void __iomem *)(x))
-#endif
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- * *_START is the physical address
- * *_SIZE is the size of the region
- * *_BASE is the virtual address
- */
-
-#define IO_START 0x03000000 /* I/O */
-#define IO_SIZE 0x01000000
-#define IO_BASE IOMEM(0xe0000000)
-
-#define ISA_START 0x0c000000 /* ISA */
-#define ISA_SIZE 0x00010000
-#define ISA_BASE 0xe1000000
-
-#define CLPS7500_FLASH_START 0x01000000 /* XXX */
-#define CLPS7500_FLASH_SIZE 0x01000000
-#define CLPS7500_FLASH_BASE 0xe2000000
-
-#define LED_START 0x0302B000
-#define LED_SIZE 0x00001000
-#define LED_BASE 0xe3000000
-#define LED_ADDRESS (LED_BASE + 0xa00)
-
-/* Let's define SCREEN_START for CL7500, even though it's a lie. */
-#define SCREEN_START 0x02000000 /* VRAM */
-#define SCREEN_END 0xdfc00000
-#define SCREEN_BASE 0xdf800000
-
-#define VIDC_BASE (void __iomem *)0xe0400000
-#define IOMD_BASE IOMEM(0xe0200000)
-#define IOC_BASE IOMEM(0xe0200000)
-#define FLOPPYDMA_BASE IOMEM(0xe002a000)
-#define PCIO_BASE IOMEM(0xe0010000)
-
-#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
-
-/* in/out bias for the ISA slot region */
-#define ISASLOT_IO 0x80400000
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/io.h
- * from arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data. We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o) \
- ({ \
- unsigned int v, r = (b); \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2]" \
- : "=r" (v) \
- : "r" (r), "Ir" (o)); \
- v; \
- })
-
-#define __arch_base_getl(b,o) \
- ({ \
- unsigned int v, r = (b); \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2]" \
- : "=r" (v) \
- : "r" (r), "Ir" (o)); \
- v; \
- })
-
-#define __arch_base_putb(v,b,o) \
- ({ \
- unsigned int r = (b); \
- __asm__ __volatile__( \
- "strb %0, [%1, %2]" \
- : \
- : "r" (v), "r" (r), "Ir" (o)); \
- })
-
-#define __arch_base_putl(v,b,o) \
- ({ \
- unsigned int r = (b); \
- __asm__ __volatile__( \
- "str %0, [%1, %2]" \
- : \
- : "r" (v), "r" (r), "Ir" (o)); \
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
- * and are translated to the start of IO. Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x) (!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "strb %1, [%0, %2, lsl #2] @ outb"
- : "=&r" (temp)
- : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "str %1, [%0, %2, lsl #2] @ outw"
- : "=&r" (temp)
- : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
- unsigned long temp;
- __asm__ __volatile__(
- "tst %2, #0x80000000\n\t"
- "mov %0, %4\n\t"
- "addeq %0, %0, %3\n\t"
- "str %1, [%0, %2, lsl #2] @ outl"
- : "=&r" (temp)
- : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
- : "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
-static inline unsigned sz __in##fnsuffix (unsigned int port) \
-{ \
- unsigned long temp, value; \
- __asm__ __volatile__( \
- "tst %2, #0x80000000\n\t" \
- "mov %0, %4\n\t" \
- "addeq %0, %0, %3\n\t" \
- "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \
- : "=&r" (temp), "=r" (value) \
- : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \
- : "cc"); \
- return (unsigned sz)value; \
-}
-
-static inline unsigned int __ioaddr (unsigned int port) \
-{ \
- if (__PORT_PCIO(port)) \
- return (unsigned int)(PCIO_BASE + (port << 2)); \
- else \
- return (unsigned int)(IO_BASE + (port << 2)); \
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr) \
- DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port) \
-({ \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inbc(port) \
-({ \
- unsigned char result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result; \
-})
-
-#define __outwc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outwc" \
- : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outwc" \
- : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inwc(port) \
-({ \
- unsigned short result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inwc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inwc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result & 0xffff; \
-})
-
-#define __outlc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (v), "r" (IO_BASE), "r" ((port) << 2)); \
-})
-
-#define __inlc(port) \
-({ \
- unsigned long result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
- result; \
-})
-
-#define __ioaddrc(port) \
- (__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
-
-#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
-#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
-#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
-#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port) __ioaddr((port))
-
-#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x) (x)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/irq.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
- *
- * Changelog:
- * 10-10-1996 RMK Brought up to date with arch-sa110eval
- * 22-08-1998 RMK Restructured IRQ routines
- * 11-08-1999 PJB Created ARM7500 version, derived from RiscPC code
- */
-
-#include <linux/io.h>
-#include <asm/hardware/iomd.h>
-
-static inline int fixup_irq(unsigned int irq)
-{
- if (irq == IRQ_ISA) {
- int isabits = *((volatile unsigned int *)0xe002b700);
- if (isabits == 0) {
- printk("Spurious ISA IRQ!\n");
- return irq;
- }
- irq = IRQ_ISA_BASE;
- while (!(isabits & 1)) {
- irq++;
- isabits >>= 1;
- }
- }
-
- return irq;
-}
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/irqs.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-#define IRQ_INT2 0
-#define IRQ_INT1 2
-#define IRQ_VSYNCPULSE 3
-#define IRQ_POWERON 4
-#define IRQ_TIMER0 5
-#define IRQ_TIMER1 6
-#define IRQ_FORCE 7
-#define IRQ_INT8 8
-#define IRQ_ISA 9
-#define IRQ_INT6 10
-#define IRQ_INT5 11
-#define IRQ_INT4 12
-#define IRQ_INT3 13
-#define IRQ_KEYBOARDTX 14
-#define IRQ_KEYBOARDRX 15
-
-#define IRQ_DMA0 16
-#define IRQ_DMA1 17
-#define IRQ_DMA2 18
-#define IRQ_DMA3 19
-#define IRQ_DMAS0 20
-#define IRQ_DMAS1 21
-
-#define IRQ_IOP0 24
-#define IRQ_IOP1 25
-#define IRQ_IOP2 26
-#define IRQ_IOP3 27
-#define IRQ_IOP4 28
-#define IRQ_IOP5 29
-#define IRQ_IOP6 30
-#define IRQ_IOP7 31
-
-#define IRQ_MOUSERX 40
-#define IRQ_MOUSETX 41
-#define IRQ_ADC 42
-#define IRQ_EVENT1 43
-#define IRQ_EVENT2 44
-
-#define IRQ_ISA_BASE 48
-#define IRQ_ISA_3 48
-#define IRQ_ISA_4 49
-#define IRQ_ISA_5 50
-#define IRQ_ISA_7 51
-#define IRQ_ISA_9 52
-#define IRQ_ISA_10 53
-#define IRQ_ISA_11 54
-#define IRQ_ISA_14 55
-
-#define FIQ_INT9 0
-#define FIQ_INT5 1
-#define FIQ_INT6 4
-#define FIQ_INT8 6
-#define FIQ_FORCE 7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START 64
-
-#define IRQ_TIMER IRQ_TIMER0
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/memory.h
- *
- * Copyright (c) 1996,1997,1998 Russell King.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 11-Jan-1998 RMK Uninlined to reduce hits on cache
- * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS 0x00000000
-#define FLUSH_BASE 0xdf000000
-
-/*
- * Sparsemem support. Each section is a maximum of 64MB. The sections
- * are offset by 128MB and can cover 128MB, so that gives us a maximum
- * of 29 physmem bits.
- */
-#define MAX_PHYSMEM_BITS 29
-#define SECTION_SIZE_BITS 26
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/system.h
- *
- * Copyright (c) 1999 Nexus Electronics Ltd.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <asm/hardware/iomd.h>
-
-static inline void arch_idle(void)
-{
- iomd_writeb(0, IOMD_SUSMODE);
-}
-
-#define arch_reset(mode) \
- do { \
- iomd_writeb(0, IOMD_ROMCR0); \
- cpu_reset(0); \
- } while (0)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/timex.h
- *
- * CL7500 architecture timex specifications
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-/*
- * On the ARM7500, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE 2000000
-
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/uncompress.h
- *
- * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
- */
-#define BASE 0x03010000
-#define SERBASE (BASE + (0x2f8 << 2))
-
-static inline void putc(char c)
-{
- while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
- barrier();
-
- *((volatile unsigned int *)(SERBASE)) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
- int baud = 3686400 / (9600 * 32);
-
- *((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
- *((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
- *((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
- *((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
- *((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
+++ /dev/null
-/*
- * arch/arm/mach-clps7500/include/mach/vmalloc.h
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x1c000000)
+++ /dev/null
-/*
- * DaVinci DMA definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS 0xffffffff
-
-#endif /* __ASM_ARCH_DMA_H */
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
-#define PCIO_BASE 0
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20))
#endif
-/*
- * Bus address is physical address
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif /* __ASM_ARCH_MEMORY_H */
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <asm/memory.h>
#include <mach/io.h>
/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
+++ /dev/null
-/*
- * arch/arm/mach-ebsa110/include/mach/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA110 DMA definitions
- */
*/
#define PHYS_OFFSET UL(0x00000000)
-/*
- * We keep this 1:1 so that we don't interfere
- * with the PCMCIA memory regions
- */
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
/*
* Cache flushing area - SRAM
*/
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307 Evaluation Board.
+config MACH_EDB9307A
+ bool "Support Cirrus Logic EDB9307A"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9307A Evaluation Board.
+
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
help
obj-$(CONFIG_MACH_EDB9302) += edb9302.o
obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o
obj-$(CONFIG_MACH_EDB9307) += edb9307.o
+obj-$(CONFIG_MACH_EDB9307A) += edb9307a.o
obj-$(CONFIG_MACH_EDB9312) += edb9312.o
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct resource adssphere_flash_resource = {
- .start = 0x60000000,
- .end = 0x61ffffff,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
#include <linux/module.h>
#include <linux/string.h>
#include <linux/io.h>
+
+#include <asm/clkdev.h>
#include <asm/div64.h>
#include <mach/hardware.h>
struct clk {
- char *name;
unsigned long rate;
int users;
u32 enable_reg;
};
static struct clk clk_uart = {
- .name = "UARTCLK",
.rate = 14745600,
};
-static struct clk clk_pll1 = {
- .name = "pll1",
-};
-static struct clk clk_f = {
- .name = "fclk",
-};
-static struct clk clk_h = {
- .name = "hclk",
-};
-static struct clk clk_p = {
- .name = "pclk",
-};
-static struct clk clk_pll2 = {
- .name = "pll2",
-};
+static struct clk clk_pll1;
+static struct clk clk_f;
+static struct clk clk_h;
+static struct clk clk_p;
+static struct clk clk_pll2;
static struct clk clk_usb_host = {
- .name = "usb_host",
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = EP93XX_SYSCON_CLOCK_USH_EN,
};
-
-static struct clk *clocks[] = {
- &clk_uart,
- &clk_pll1,
- &clk_f,
- &clk_h,
- &clk_p,
- &clk_pll2,
- &clk_usb_host,
+#define INIT_CK(dev,con,ck) \
+ { .dev_id = dev, .con_id = con, .clk = ck }
+
+static struct clk_lookup clocks[] = {
+ INIT_CK("apb:uart1", NULL, &clk_uart),
+ INIT_CK("apb:uart2", NULL, &clk_uart),
+ INIT_CK("apb:uart3", NULL, &clk_uart),
+ INIT_CK(NULL, "pll1", &clk_pll1),
+ INIT_CK(NULL, "fclk", &clk_f),
+ INIT_CK(NULL, "hclk", &clk_h),
+ INIT_CK(NULL, "pclk", &clk_p),
+ INIT_CK(NULL, "pll2", &clk_pll2),
+ INIT_CK(NULL, "usb_host", &clk_usb_host),
};
-struct clk *clk_get(struct device *dev, const char *id)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(clocks); i++) {
- if (!strcmp(clocks[i]->name, id))
- return clocks[i];
- }
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
int clk_enable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_get_rate);
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-
static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
static int __init ep93xx_clock_init(void)
{
u32 value;
+ int i;
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
+ for (i = 0; i < ARRAY_SIZE(clocks); i++)
+ clkdev_add(&clocks[i]);
return 0;
}
arch_initcall(ep93xx_clock_init);
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
#include <asm/types.h>
#include <asm/setup.h>
static unsigned char gpio_int_enabled[3];
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
+static unsigned char gpio_int_debouce[3];
/* Port ordering is: A B F */
static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
+static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
void ep93xx_gpio_update_int_params(unsigned port)
{
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}
+void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if (enable)
+ gpio_int_debouce[port] |= port_mask;
+ else
+ gpio_int_debouce[port] &= ~port_mask;
+
+ __raw_writeb(gpio_int_debouce[port],
+ EP93XX_GPIO_REG(int_debounce_register_offset[port]));
+}
+EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
+
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
platform_device_register(&ep93xx_eth_device);
}
+static struct i2c_gpio_platform_data ep93xx_i2c_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 2,
+};
+
+static struct platform_device ep93xx_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev.platform_data = &ep93xx_i2c_data,
+};
+
+void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+{
+ i2c_register_board_info(0, devices, num);
+ platform_device_register(&ep93xx_i2c_device);
+}
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct resource edb9302_flash_resource = {
- .start = 0x60000000,
- .end = 0x60ffffff,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
/* Maintainer: George Kashperko <george@chas.com.ua> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct resource edb9302a_flash_resource = {
- .start = 0x60000000,
- .end = 0x60ffffff,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
};
static struct ep93xx_eth_data edb9302a_eth_data = {
- .phy_id = 1,
+ .phy_id = 1,
};
static void __init edb9302a_init_machine(void)
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0xc0000100,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct resource edb9307_flash_resource = {
- .start = 0x60000000,
- .end = 0x61ffffff,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
};
static struct ep93xx_eth_data edb9307_eth_data = {
- .phy_id = 1,
+ .phy_id = 1,
};
static void __init edb9307_init_machine(void)
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
--- /dev/null
+/*
+ * arch/arm/mach-ep93xx/edb9307a.c
+ * Cirrus Logic EDB9307A support.
+ *
+ * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9307a_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9307a_flash_resource = {
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9307a_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9307a_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9307a_flash_resource,
+};
+
+static struct ep93xx_eth_data edb9307a_eth_data = {
+ .phy_id = 1,
+};
+
+static void __init edb9307a_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9307a_flash);
+
+ ep93xx_register_eth(&edb9307a_eth_data, 1);
+}
+
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9307a_init_machine,
+MACHINE_END
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct resource edb9312_flash_resource = {
- .start = 0x60000000,
- .end = 0x61ffffff,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
};
static struct ep93xx_eth_data edb9312_eth_data = {
- .phy_id = 1,
+ .phy_id = 1,
};
static void __init edb9312_init_machine(void)
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct resource edb9315_flash_resource = {
- .start = 0x60000000,
- .end = 0x61ffffff,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
};
static struct ep93xx_eth_data edb9315_eth_data = {
- .phy_id = 1,
+ .phy_id = 1,
};
static void __init edb9315_init_machine(void)
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct resource edb9315a_flash_resource = {
- .start = 0x60000000,
- .end = 0x60ffffff,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
};
static struct ep93xx_eth_data edb9315a_eth_data = {
- .phy_id = 1,
+ .phy_id = 1,
};
static void __init edb9315a_init_machine(void)
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0xc0000100,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
static struct resource gesbc9312_flash_resource = {
- .start = 0x60000000,
- .end = 0x607fffff,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
.flags = IORESOURCE_MEM,
};
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
--- /dev/null
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
- */
/* maximum value for irq capable line identifiers */
#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
+extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
+
/* new generic GPIO API - see Documentation/gpio.txt */
#include <asm-generic/gpio.h>
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)(p))
-#define __mem_pci(p) (p)
+#define __io(p) __typesafe_io(p)
+#define __mem_pci(p) (p)
#define PHYS_OFFSET UL(0x00000000)
-#define __bus_to_virt(x) __phys_to_virt(x)
-#define __virt_to_bus(x) __virt_to_phys(x)
-
-
#endif
void ep93xx_init_irq(void);
void ep93xx_init_time(unsigned long);
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
+void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
static struct ep93xx_eth_data micro9_eth_data = {
- .phy_id = 0x1f,
+ .phy_id = 0x1f,
};
static void __init micro9_init(void)
*/
#ifdef CONFIG_MACH_MICRO9H
static struct physmap_flash_data micro9h_flash_data = {
- .width = 4,
+ .width = 4,
};
static struct resource micro9h_flash_resource = {
- .start = 0x10000000,
- .end = 0x13ffffff,
- .flags = IORESOURCE_MEM,
+ .start = EP93XX_CS1_PHYS_BASE,
+ .end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device micro9h_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = µ9h_flash_data,
- },
- .num_resources = 1,
- .resource = µ9h_flash_resource,
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = µ9h_flash_data,
+ },
+ .num_resources = 1,
+ .resource = µ9h_flash_resource,
};
static void __init micro9h_init(void)
{
- platform_device_register(µ9h_flash);
+ platform_device_register(µ9h_flash);
}
static void __init micro9h_init_machine(void)
{
- ep93xx_init_devices();
- micro9_init();
- micro9h_init();
+ ep93xx_init_devices();
+ micro9_init();
+ micro9h_init();
}
MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = micro9h_init_machine,
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9h_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_MICRO9M
static void __init micro9m_init_machine(void)
{
- ep93xx_init_devices();
- micro9_init();
+ ep93xx_init_devices();
+ micro9_init();
}
MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = micro9m_init_machine,
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9m_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_MICRO9L
static void __init micro9l_init_machine(void)
{
- ep93xx_init_devices();
- micro9_init();
+ ep93xx_init_devices();
+ micro9_init();
}
MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = micro9l_init_machine,
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9l_init_machine,
MACHINE_END
#endif
#include <linux/platform_device.h>
#include <linux/m48t86.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static struct resource ts72xx_flash_resource = {
.start = TS72XX_NOR_PHYS_BASE,
- .end = TS72XX_NOR_PHYS_BASE + 0x00ffffff,
+ .end = TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
}
static struct m48t86_ops ts72xx_rtc_ops = {
- .readbyte = ts72xx_rtc_readbyte,
- .writebyte = ts72xx_rtc_writebyte,
+ .readbyte = ts72xx_rtc_readbyte,
+ .writebyte = ts72xx_rtc_writebyte,
};
static struct platform_device ts72xx_rtc_device = {
- .name = "rtc-m48t86",
- .id = -1,
- .dev = {
- .platform_data = &ts72xx_rtc_ops,
+ .name = "rtc-m48t86",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts72xx_rtc_ops,
},
- .num_resources = 0,
+ .num_resources = 0,
};
static struct ep93xx_eth_data ts72xx_eth_data = {
- .phy_id = 1,
+ .phy_id = 1,
};
static void __init ts72xx_init_machine(void)
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
#include <linux/init.h>
#include <linux/screen_info.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
#include <linux/list.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/spinlock.h>
#include <asm/irq.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <asm/irq.h>
#include <asm/system.h>
*/
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <asm/dma.h>
#include <asm/scatterlist.h>
* EBSA285 machine fixup
*/
#include <linux/init.h>
+#include <linux/spinlock.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#include <mach/memory.h>
-
/* Virtual Physical Size
* 0xff800000 0x40000000 1MB X-Bus
* 0xff000000 0x7c000000 1MB PCI I/O space
#define XBUS_SIZE 0x00100000
#define XBUS_BASE 0xff800000
-#define PCIO_SIZE 0x00100000
-#define PCIO_BASE 0xff000000
-
#define ARMCSR_SIZE 0x00100000
#define ARMCSR_BASE 0xfe000000
#define CPLD_FLASH_WR_ENABLE 1
#ifndef __ASSEMBLY__
-extern void gpio_modify_op(int mask, int set);
-extern void gpio_modify_io(int mask, int in);
-extern int gpio_read(void);
-extern void cpld_modify(int mask, int set);
+extern spinlock_t nw_gpio_lock;
+extern void nw_gpio_modify_op(unsigned int mask, unsigned int set);
+extern void nw_gpio_modify_io(unsigned int mask, unsigned int in);
+extern unsigned int nw_gpio_read(void);
+extern void nw_cpld_modify(unsigned int mask, unsigned int set);
#endif
#define pcibios_assign_all_busses() 1
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
+#define PCIO_SIZE 0x00100000
+#define PCIO_BASE 0xff000000
#define IO_SPACE_LIMIT 0xffff
/*
- * arch/arm/mach-footbridge/include/mach/dma.h
+ * arch/arm/mach-footbridge/include/mach/isa-dma.h
*
* Architecture DMA routines
*
extern unsigned long __virt_to_bus(unsigned long);
extern unsigned long __bus_to_virt(unsigned long);
#endif
+#define __virt_to_bus __virt_to_bus
+#define __bus_to_virt __bus_to_virt
#elif defined(CONFIG_FOOTBRIDGE_HOST)
+/*
+ * The footbridge is programmed to expose the system RAM at the corresponding
+ * address. So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000.
+ * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc.
+ * The only requirement is that the RAM isn't placed at bus address 0 which
+ * would clash with VGA cards.
+ */
#define __virt_to_bus(x) ((x) - 0xe0000000)
#define __bus_to_virt(x) ((x) + 0xe0000000)
#include <linux/list.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <asm/mach/irq.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
#include <asm/hardware/dec21285.h>
#include <asm/leds.h>
/*
* This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE
*/
-DEFINE_SPINLOCK(gpio_lock);
+DEFINE_SPINLOCK(nw_gpio_lock);
+EXPORT_SYMBOL(nw_gpio_lock);
static unsigned int current_gpio_op;
static unsigned int current_gpio_io;
static unsigned int current_cpld;
-void gpio_modify_op(int mask, int set)
+void nw_gpio_modify_op(unsigned int mask, unsigned int set)
{
unsigned int new_gpio, changed;
if (changed & 0xff00)
outb(new_gpio >> 8, GP2_IO_BASE);
}
+EXPORT_SYMBOL(nw_gpio_modify_op);
static inline void __gpio_modify_io(int mask, int in)
{
}
}
-void gpio_modify_io(int mask, int in)
+void nw_gpio_modify_io(unsigned int mask, unsigned int in)
{
/* Open up the SuperIO chip */
wb977_open();
/* Close up the EFER gate */
wb977_close();
}
+EXPORT_SYMBOL(nw_gpio_modify_io);
-int gpio_read(void)
+unsigned int nw_gpio_read(void)
{
return inb(GP1_IO_BASE) | inb(GP2_IO_BASE) << 8;
}
+EXPORT_SYMBOL(nw_gpio_read);
/*
* Initialise the Winbond W83977F global registers
/*
* Set Group1/Group2 outputs
*/
- spin_lock_irqsave(&gpio_lock, flags);
- gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
/*
wb977_close();
}
-void cpld_modify(int mask, int set)
+void nw_cpld_modify(unsigned int mask, unsigned int set)
{
int msk;
current_cpld = (current_cpld & ~mask) | set;
- gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
- gpio_modify_op(GPIO_IOLOAD, 0);
+ nw_gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
+ nw_gpio_modify_op(GPIO_IOLOAD, 0);
for (msk = 8; msk; msk >>= 1) {
int bit = current_cpld & msk;
- gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
- gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
+ nw_gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
+ nw_gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
}
- gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
- gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
- gpio_modify_op(GPIO_IOLOAD, 0);
+ nw_gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
+ nw_gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
+ nw_gpio_modify_op(GPIO_IOLOAD, 0);
}
+EXPORT_SYMBOL(nw_cpld_modify);
static void __init cpld_init(void)
{
unsigned long flags;
- spin_lock_irqsave(&gpio_lock, flags);
- cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
static unsigned char rwa_unlock[] __initdata =
rwa010_soundblaster_reset();
}
-EXPORT_SYMBOL(gpio_lock);
-EXPORT_SYMBOL(gpio_modify_op);
-EXPORT_SYMBOL(gpio_modify_io);
-EXPORT_SYMBOL(cpld_modify);
-EXPORT_SYMBOL(gpio_read);
-
/*
* Initialise any other hardware after we've got the PCI bus
* initialised. We may need the PCI bus to talk to this other
cpld_init();
rwa010_init();
- spin_lock_irqsave(&gpio_lock, flags);
- gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
return 0;
}
static char hw_led_state;
static DEFINE_SPINLOCK(leds_lock);
-extern spinlock_t gpio_lock;
static void netwinder_leds_event(led_event_t evt)
{
spin_unlock_irqrestore(&leds_lock, flags);
if (led_state & LED_STATE_ENABLED) {
- spin_lock_irqsave(&gpio_lock, flags);
- gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
}
* Personal server (Skiff) machine fixup
*/
#include <linux/init.h>
+#include <linux/spinlock.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(a))
+#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif
/*
- * arch/arm/mach-h720x/include/mach/dma.h
+ * arch/arm/mach-h720x/include/mach/isa-dma.h
*
* Architecture DMA routes
*
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS 0xd0000000
-
#if defined (CONFIG_CPU_H7201)
#define MAX_DMA_CHANNELS 3
#elif defined (CONFIG_CPU_H7202)
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-/*
- * Page offset:
- * ( 0xc0000000UL )
- */
#define PHYS_OFFSET UL(0x40000000)
-
/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * There is something to do here later !, Mar 2000, Jungjun Kim
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
*/
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
#endif
#include <linux/interrupt.h>
#include <linux/errno.h>
+#include <asm/scatterlist.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/imx-dma.h>
struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
int
imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
unsigned int dma_length, unsigned int dev_addr,
- dmamode_t dmamode)
+ unsigned int dmamode)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
int
imx_dma_setup_sg(imx_dmach_t dma_ch,
struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, dmamode_t dmamode)
+ unsigned int dev_addr, unsigned int dmamode)
{
int res;
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <asm/dma.h>
+#include <mach/dma.h>
#ifndef __ASM_ARCH_IMX_DMA_H
#define __ASM_ARCH_IMX_DMA_H
void (*irq_handler) (int, void *);
void (*err_handler) (int, void *, int errcode);
void *data;
- dmamode_t dma_mode;
+ unsigned int dma_mode;
struct scatterlist *sg;
unsigned int sgbc;
unsigned int sgcount;
/* The type to distinguish channel numbers parameter from ordinal int type */
typedef int imx_dmach_t;
+#define DMA_MODE_READ 0
+#define DMA_MODE_WRITE 1
+#define DMA_MODE_MASK 1
+
int
imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr, dmamode_t dmamode);
+ unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
int
imx_dma_setup_sg(imx_dmach_t dma_ch,
struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, dmamode_t dmamode);
+ unsigned int dev_addr, unsigned int dmamode);
int
imx_dma_setup_handlers(imx_dmach_t dma_ch,
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(a))
+#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif
#define PHYS_OFFSET UL(0x08000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET)
-
#endif
+++ /dev/null
-/*
- * arch/arm/mach-integrator/include/mach/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
-#define BUS_OFFSET UL(0x80000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (x - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt(x) (x - BUS_OFFSET + PAGE_OFFSET)
+#define BUS_OFFSET UL(0x80000000)
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
+#define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET)
#endif
+++ /dev/null
-#ifndef _IOP13XX_DMA_H
-#define _IOP13XX_DMA_H
-#endif
#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-
-/* RAM has 1:1 mapping on the PCIe/x Busses */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
static inline dma_addr_t __virt_to_lbus(unsigned long x)
{
return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
if (is_lbus_device(dev) && __is_lbus_dma(__dma)) \
__virt = __lbus_to_virt(__dma); \
else \
- __virt = __bus_to_virt(__dma); \
+ __virt = __phys_to_virt(__dma); \
(void *)__virt; \
})
if (is_lbus_device(dev) && __is_lbus_virt(__virt)) \
__dma = __virt_to_lbus(__virt); \
else \
- __dma = __virt_to_bus(__virt); \
+ __dma = __virt_to_phys(__virt); \
__dma; \
})
-#include <mach/hardware.h>
-
#define CLOCK_TICK_RATE (100 * HZ)
+++ /dev/null
-/*
- * arch/arm/mach-iop32x/include/mach/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
#ifndef __IO_H
#define __IO_H
-#include <mach/hardware.h>
+#include <asm/hardware/iop3xx.h>
extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
unsigned int mtype);
#ifndef __MEMORY_H
#define __MEMORY_H
-#include <mach/hardware.h>
-
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0xa0000000)
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
-
#endif
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <asm/mach-types.h>
+#include <asm/hardware/iop3xx.h>
+#include <mach/n2100.h>
static inline void arch_idle(void)
{
*
* IOP32x architecture timex specifications
*/
-
-#include <mach/hardware.h>
-
#define CLOCK_TICK_RATE (100 * HZ)
+++ /dev/null
-/*
- * arch/arm/mach-iop33x/include/mach/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
#ifndef __IO_H
#define __IO_H
-#include <mach/hardware.h>
+#include <asm/hardware/iop3xx.h>
extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
unsigned int mtype);
#ifndef __MEMORY_H
#define __MEMORY_H
-#include <mach/hardware.h>
-
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
-
#endif
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <asm/hardware/iop3xx.h>
static inline void arch_idle(void)
{
*
* IOP3xx architecture timex specifications
*/
-
-#include <mach/hardware.h>
-
#define CLOCK_TICK_RATE (100 * HZ)
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/dma.h
- *
- * Copyright (C) 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
#define PHYS_OFFSET UL(0x00000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
#include <mach/ixp2000-regs.h>
#define __virt_to_bus(v) \
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/dma.h
- */
#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
#define __mem_pci(a) (a)
-#include <linux/kernel.h> /* For BUG */
-
static inline void __iomem *
ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
{
*/
#define PHYS_OFFSET (0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#ifndef __ASSEMBLY__
-
#define __virt_to_bus(v) \
({ unsigned int ret; \
ret = ((__virt_to_phys(v) - 0x00000000) + \
#define arch_is_coherent() 1
#endif
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp4xx/include/mach/dma.h
- *
- * Copyright (C) 2001-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/device.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
-
-#endif /* _ASM_ARCH_DMA_H */
#else
-#include <linux/mm.h>
-
/*
* In the case of using indirect PCI, we simply return the actual PCI
* address and our read/write implementation use that to drive the
#ifndef CONFIG_PCI
-#define __io(v) v
+#define __io(v) __typesafe_io(v)
#else
ixp4xx_adjust_zones(node, size, holes)
#define ISA_DMA_THRESHOLD (SZ_64M - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
#endif
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * These are dummies for now.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
****************************************************************************/
static struct orion_ehci_data kirkwood_ehci_data = {
.dram = &kirkwood_mbus_dram_info,
+ .phy_version = EHCI_PHY_NA,
};
static u64 ehci_dmamask = 0xffffffffUL;
}
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data kirkwood_ge01_shared_data = {
+ .dram = &kirkwood_mbus_dram_info,
+ .shared_smi = &kirkwood_ge00_shared,
+};
+
+static struct resource kirkwood_ge01_shared_resources[] = {
+ {
+ .name = "ge01 base",
+ .start = GE01_PHYS_BASE + 0x2000,
+ .end = GE01_PHYS_BASE + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "ge01 err irq",
+ .start = IRQ_KIRKWOOD_GE01_ERR,
+ .end = IRQ_KIRKWOOD_GE01_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_ge01_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 1,
+ .dev = {
+ .platform_data = &kirkwood_ge01_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(kirkwood_ge01_shared_resources),
+ .resource = kirkwood_ge01_shared_resources,
+};
+
+static struct resource kirkwood_ge01_resources[] = {
+ {
+ .name = "ge01 irq",
+ .start = IRQ_KIRKWOOD_GE01_SUM,
+ .end = IRQ_KIRKWOOD_GE01_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_ge01 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = 1,
+ .resource = kirkwood_ge01_resources,
+};
+
+void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &kirkwood_ge01_shared;
+ kirkwood_ge01.dev.platform_data = eth_data;
+
+ platform_device_register(&kirkwood_ge01_shared);
+ platform_device_register(&kirkwood_ge01);
+}
+
+
/*****************************************************************************
* Ethernet switch
****************************************************************************/
void kirkwood_ehci_init(void);
void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
void kirkwood_pcie_init(void);
void kirkwood_rtc_init(void);
+++ /dev/null
-/* empty */
#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
#define IRQ_KIRKWOOD_GE00_ERR 46
+#define IRQ_KIRKWOOD_GE01_ERR 47
/*
* KIRKWOOD General Purpose Pins
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
#endif
.port_names[1] = "lan2",
.port_names[2] = "lan3",
.port_names[3] = "lan4",
- .port_names[4] = "wan",
.port_names[5] = "cpu",
};
+static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
+};
+
static struct mv_sata_platform_data rd88f6281_sata_data = {
.n_ports = 2,
};
static void __init rd88f6281_init(void)
{
+ u32 dev, rev;
+
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_ehci_init();
+
kirkwood_ge00_init(&rd88f6281_ge00_data);
+ kirkwood_pcie_id(&dev, &rev);
+ if (rev == MV88F6281_REV_A0) {
+ rd88f6281_switch_data.sw_addr = 10;
+ kirkwood_ge01_init(&rd88f6281_ge01_data);
+ } else {
+ rd88f6281_switch_data.port_names[4] = "wan";
+ }
kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
+
kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6281_sata_data);
kirkwood_uart0_init();
Say 'Y' here if you want your kernel to run on the original
Kendin-Micrel KS8695 development board.
+config MACH_DSM320
+ bool "DSM-320 Wireless Media Player"
+ help
+ Say 'Y' here if you want your kernel to run on the D-Link
+ DSM-320 Wireless Media Player.
+
endmenu
endif
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
+obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
--- /dev/null
+/*
+ * arch/arm/mach-ks8695/board-dsm320.c
+ *
+ * DSM-320 D-Link Wireless Media Player, board support.
+ *
+ * Copyright 2008 Simtec Electronics
+ * Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/devices.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+#ifdef CONFIG_PCI
+static int dsm320_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ switch (slot) {
+ case 0:
+ /* PCI-AHB bridge? */
+ return KS8695_IRQ_EXTERN0;
+ case 18:
+ /* Mini PCI slot */
+ return KS8695_IRQ_EXTERN2;
+ case 20:
+ /* RealMAGIC chip */
+ return KS8695_IRQ_EXTERN0;
+ }
+ BUG();
+}
+
+static struct ks8695_pci_cfg __initdata dsm320_pci = {
+ .mode = KS8695_MODE_MINIPCI,
+ .map_irq = dsm320_pci_map_irq,
+};
+
+static void __init dsm320_register_pci(void)
+{
+ /* Initialise the GPIO lines for interrupt mode */
+ /* RealMAGIC */
+ ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
+ /* MiniPCI Slot */
+ ks8695_gpio_interrupt(KS8695_GPIO_2, IRQ_TYPE_LEVEL_LOW);
+
+ ks8695_init_pci(&dsm320_pci);
+}
+
+#else
+static inline void __init dsm320_register_pci(void) { }
+#endif
+
+static struct physmap_flash_data dsm320_nor_pdata = {
+ .width = 4,
+ .nr_parts = 0,
+};
+
+static struct resource dsm320_nor_resource[] = {
+ [0] = {
+ .start = SZ_32M, /* We expect the bootloader to map
+ * the flash here.
+ */
+ .end = SZ_32M + SZ_4M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device dsm320_device_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dsm320_nor_resource),
+ .resource = dsm320_nor_resource,
+ .dev = {
+ .platform_data = &dsm320_nor_pdata,
+ },
+};
+
+void __init dsm320_register_nor(void)
+{
+ int ret;
+
+ ret = platform_device_register(&dsm320_device_nor);
+ if (ret < 0)
+ printk(KERN_ERR "failed to register physmap-flash device\n");
+}
+
+static void __init dsm320_init(void)
+{
+ /* GPIO registration */
+ ks8695_register_gpios();
+
+ /* PCI registration */
+ dsm320_register_pci();
+
+ /* Network device */
+ ks8695_add_device_lan(); /* eth0 = LAN */
+
+ /* NOR devices */
+ dsm320_register_nor();
+}
+
+MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
+ /* Maintainer: Simtec Electronics. */
+ .phys_io = KS8695_IO_PA,
+ .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc,
+ .boot_params = KS8695_SDRAM_PA + 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = dsm320_init,
+ .timer = &ks8695_timer,
+MACHINE_END
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/gpio.h>
#include <mach/devices.h>
#include "generic.h"
{
printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
+ ks8695_register_gpios();
+
#ifdef CONFIG_PCI
ks8695_init_pci(&micrel_pci);
#endif
#include <mach/regs-wan.h>
#include <mach/regs-lan.h>
#include <mach/regs-hpna.h>
+#include <mach/regs-switch.h>
+#include <mach/regs-misc.h>
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
-#if defined(CONFIG_ARM_KS8695_ETHER) || defined(CONFIG_ARM_KS8695_ETHER_MODULE)
static u64 eth_dmamask = 0xffffffffUL;
static struct resource ks8695_wan_resources[] = {
[0] = {
- .start = KS8695_WAN_VA,
- .end = KS8695_WAN_VA + 0x00ff,
+ .start = KS8695_WAN_PA,
+ .end = KS8695_WAN_PA + 0x00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.end = KS8695_IRQ_WAN_LINK,
.flags = IORESOURCE_IRQ,
},
+ [4] = {
+ .name = "WAN PHY",
+ .start = KS8695_MISC_PA,
+ .end = KS8695_MISC_PA + 0x1f,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device ks8695_wan_device = {
static struct resource ks8695_lan_resources[] = {
[0] = {
- .start = KS8695_LAN_VA,
- .end = KS8695_LAN_VA + 0x00ff,
+ .start = KS8695_LAN_PA,
+ .end = KS8695_LAN_PA + 0x00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.end = KS8695_IRQ_LAN_TX_STATUS,
.flags = IORESOURCE_IRQ,
},
+ [3] = {
+ .name = "LAN SWITCH",
+ .start = KS8695_SWITCH_PA,
+ .end = KS8695_SWITCH_PA + 0x4f,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device ks8695_lan_device = {
static struct resource ks8695_hpna_resources[] = {
[0] = {
- .start = KS8695_HPNA_VA,
- .end = KS8695_HPNA_VA + 0x00ff,
+ .start = KS8695_HPNA_PA,
+ .end = KS8695_HPNA_PA + 0x00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
{
platform_device_register(&ks8695_hpna_device);
}
-#else
-void __init ks8695_add_device_wan(void) {}
-void __init ks8695_add_device_lan(void) {}
-void __init ks8696_add_device_hpna(void) {}
-#endif
/* --------------------------------------------------------------------
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_KS8695_WATCHDOG) || defined(CONFIG_KS8695_WATCHDOG_MODULE)
static struct platform_device ks8695_wdt_device = {
.name = "ks8695_wdt",
.id = -1,
{
platform_device_register(&ks8695_wdt_device);
}
-#else
-static void __init ks8695_add_device_watchdog(void) {}
-#endif
/* --------------------------------------------------------------------
gpio_direction_output(cpu_led, 1);
gpio_direction_output(timer_led, 1);
- ks8695_leds_cpu = cpu_led;
+ ks8695_leds_cpu = cpu_led;
ks8695_leds_timer = timer_led;
}
#else
* arch/arm/mach-ks8695/gpio.c
*
* Copyright (C) 2006 Andrew Victor
+ * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
+ * Daniel Silverstone <dsilvers@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* Configure a GPIO line for either GPIO function, or its internal
* function (Interrupt, Timer, etc).
*/
-static void __init_or_module ks8695_gpio_mode(unsigned int pin, short gpio)
+static void ks8695_gpio_mode(unsigned int pin, short gpio)
{
unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
unsigned long x, flags;
/*
* Configure GPIO pin as external interrupt source.
*/
-int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
+int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
{
unsigned long x, flags;
/*
* Configure the GPIO line as an input.
*/
-int __init_or_module gpio_direction_input(unsigned int pin)
+static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
{
unsigned long x, flags;
return 0;
}
-EXPORT_SYMBOL(gpio_direction_input);
/*
* Configure the GPIO line as an output, with default state.
*/
-int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state)
+static int ks8695_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int pin, int state)
{
unsigned long x, flags;
return 0;
}
-EXPORT_SYMBOL(gpio_direction_output);
/*
* Set the state of an output GPIO line.
*/
-void gpio_set_value(unsigned int pin, unsigned int state)
+static void ks8695_gpio_set_value(struct gpio_chip *gc,
+ unsigned int pin, int state)
{
unsigned long x, flags;
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_set_value);
/*
* Read the state of a GPIO line.
*/
-int gpio_get_value(unsigned int pin)
+static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
{
unsigned long x;
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
return (x & IOPD(pin)) != 0;
}
-EXPORT_SYMBOL(gpio_get_value);
/*
* Map GPIO line to IRQ number.
*/
-int gpio_to_irq(unsigned int pin)
+static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
{
if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
return -EINVAL;
return gpio_irq[pin];
}
-EXPORT_SYMBOL(gpio_to_irq);
-
/*
* Map IRQ number to GPIO line.
}
EXPORT_SYMBOL(irq_to_gpio);
+/* GPIOLIB interface */
+
+static struct gpio_chip ks8695_gpio_chip = {
+ .label = "KS8695",
+ .direction_input = ks8695_gpio_direction_input,
+ .direction_output = ks8695_gpio_direction_output,
+ .get = ks8695_gpio_get_value,
+ .set = ks8695_gpio_set_value,
+ .to_irq = ks8695_gpio_to_irq,
+ .base = 0,
+ .ngpio = 16,
+ .can_sleep = 0,
+};
+
+/* Register the GPIOs */
+void ks8695_register_gpios(void)
+{
+ if (gpiochip_add(&ks8695_gpio_chip))
+ printk(KERN_ERR "Unable to register core GPIOs\n");
+}
/* .... Debug interface ..................................................... */
+++ /dev/null
-/*
- * arch/arm/mach-ks8695/include/mach/dma.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
#define KS8695_GPIO_14 14
#define KS8695_GPIO_15 15
-
/*
* Configure GPIO pin as external interrupt source.
*/
-int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
-/*
- * Configure the GPIO line as an input.
- */
-int __init_or_module gpio_direction_input(unsigned int pin);
-
-/*
- * Configure the GPIO line as an output, with default state.
- */
-int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
-
-/*
- * Set the state of an output GPIO line.
- */
-void gpio_set_value(unsigned int pin, unsigned int state);
-
-/*
- * Read the state of a GPIO line.
- */
-int gpio_get_value(unsigned int pin);
-
-/*
- * Map GPIO line to IRQ number.
- */
-int gpio_to_irq(unsigned int pin);
+extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
/*
* Map IRQ number to GPIO line.
*/
-int irq_to_gpio(unsigned int irq);
-
+extern int irq_to_gpio(unsigned int irq);
#include <asm-generic/gpio.h>
-static inline int gpio_request(unsigned int pin, const char *label)
-{
- return 0;
-}
+/* If it turns out that we need to optimise GPIO access for the
+ * Micrel's GPIOs, then these can be changed to check their argument
+ * directly as static inlines. However for now it's probably not
+ * worthwhile.
+ */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_to_irq __gpio_to_irq
-static inline void gpio_free(unsigned int pin)
-{
- might_sleep();
-}
+/* Register the GPIOs */
+extern void ks8695_register_gpios(void);
#endif
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
-#else
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#endif
+++ /dev/null
-/*
- * arch/arm/mach-l7200/include/mach/dma.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 08-29-2000 SJH Created
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS 0xd0000000
-
-#define DMA_S0 0
-
-#endif /* _ASM_ARCH_DMA_H */
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
/*
* There are not real ISA nor PCI buses, so we fake it.
*/
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
*/
#define PHYS_OFFSET UL(0xf0000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* Cache flushing area - ROM
*/
#include <linux/err.h>
struct module;
-struct icst525_params;
struct clk {
struct list_head node;
unsigned long rate;
struct module *owner;
const char *name;
-// void *data;
-// const struct icst525_params *params;
-// void (*setvco)(struct clk *, struct icst525_vco vco);
};
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
/* ----- */
#define MAINDIV1(c) (((c) >> 7) & 0x0f)
/* ----- */
-static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
-
struct clk *clk_get (struct device *dev, const char *id)
{
- struct clk *p;
- struct clk *clk = ERR_PTR(-ENOENT);
-
- down (&clocks_sem);
- list_for_each_entry (p, &clocks, node) {
- if (strcmp (id, p->name) == 0
- && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
- up (&clocks_sem);
-
- return clk;
+ return dev && strcmp(dev_name(dev), "cldc-lh7a40x") == 0
+ ? NULL : ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
void clk_put (struct clk *clk)
{
- module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
}
EXPORT_SYMBOL(clk_disable);
-int clk_use (struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_use);
-
-void clk_unuse (struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_unuse);
-
unsigned long clk_get_rate (struct clk *clk)
{
- return clk->rate;
+ return 0;
}
EXPORT_SYMBOL(clk_get_rate);
int clk_set_rate (struct clk *clk, unsigned long rate)
{
- int ret = -EIO;
- return ret;
+ return -EIO;
}
EXPORT_SYMBOL(clk_set_rate);
-
-#if 0
-/*
- * These are fixed clocks.
- */
-static struct clk kmi_clk = {
- .name = "KMIREFCLK",
- .rate = 24000000,
-};
-
-static struct clk uart_clk = {
- .name = "UARTCLK",
- .rate = 24000000,
-};
-
-static struct clk mmci_clk = {
- .name = "MCLK",
- .rate = 33000000,
-};
-#endif
-
-static struct clk clcd_clk = {
- .name = "CLCDCLK",
- .rate = 0,
-};
-
-int clk_register (struct clk *clk)
-{
- down (&clocks_sem);
- list_add (&clk->node, &clocks);
- up (&clocks_sem);
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister (struct clk *clk)
-{
- down (&clocks_sem);
- list_del (&clk->node);
- up (&clocks_sem);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-static int __init clk_init (void)
-{
- clk_register(&clcd_clk);
- return 0;
-}
-arch_initcall(clk_init);
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
-#include <mach/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
/* No ISA or PCI bus on this machine. */
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif /* __ASM_ARCH_IO_H */
*/
#define PHYS_OFFSET UL(0xc0000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#ifdef CONFIG_DISCONTIGMEM
/*
+++ /dev/null
-/* empty */
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
#endif
void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#define __io(a) __io(a)
+#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif
/* physical offset of RAM */
#define PHYS_OFFSET UL(0x10000000)
-/* bus address and physical addresses are identical */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
****************************************************************************/
static struct orion_ehci_data mv78xx0_ehci_data = {
.dram = &mv78xx0_mbus_dram_info,
+ .phy_version = EHCI_PHY_NA,
};
static u64 ehci_dmamask = 0xffffffffUL;
+++ /dev/null
-/* empty */
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
#endif
.resource = mxc_wdt_resources,
};
+static struct resource mxc_w1_master_resources[] = {
+ {
+ .start = OWIRE_BASE_ADDR,
+ .end = OWIRE_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_w1_master_device = {
+ .name = "mxc_w1",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_w1_master_resources),
+ .resource = mxc_w1_master_resources,
+};
+
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
[0] = {
extern struct platform_device mxc_uart_device3;
extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_uart_device5;
-
+extern struct platform_device mxc_w1_master_device;
static struct platform_device *platform_devices[] __initdata = {
&pcm038_nor_mtd_device,
+ &mxc_w1_master_device,
};
static void __init pcm038_init(void)
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+ mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
+
+static struct resource mxc_w1_master_resources[] = {
+ {
+ .start = OWIRE_BASE_ADDR,
+ .end = OWIRE_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_w1_master_device = {
+ .name = "mxc_w1",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_w1_master_resources),
+ .resource = mxc_w1_master_resources,
+};
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_uart_device3;
extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_w1_master_device;
mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
+
+ mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
+ mxc_register_device(&mxc_w1_master_device, NULL);
}
/*
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/err.h>
#include <mach/netx-regs.h>
#include <mach/hardware.h>
-struct clk {};
-
-static struct clk fb_clk;
-
static struct clcd_panel *netx_panel;
void netx_clcd_enable(struct clcd_fb *fb)
struct clk *clk_get(struct device *dev, const char *id)
{
- return &fb_clk;
+ return dev && strcmp(dev_name(dev), "fb") == 0 ? NULL : ERR_PTR(-ENOENT);
}
void clk_put(struct clk *clk)
+++ /dev/null
-/*
- * arch/arm/mach-netx/include/mach/dma.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS ~0
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(a))
+#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif
#define PHYS_OFFSET UL(0x80000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/dma.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#endif /* ifndef __ASM_ARCH_DMA_H */
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#include <asm/memory.h>
-
/*
* NetSilicon NS9xxx internal mapping:
*
#define IO_SPACE_LIMIT 0xffffffff /* XXX */
-#define __io(a) ((void __iomem *)(a))
+#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#define __mem_isa(a) (IO_BASE + (a))
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
config ARCH_OMAP730
depends on ARCH_OMAP1
bool "OMAP730 Based System"
+ select CPU_ARM926T
select ARCH_OMAP_OTG
config ARCH_OMAP15XX
depends on ARCH_OMAP1
default y
bool "OMAP15xx Based System"
+ select CPU_ARM925T
config ARCH_OMAP16XX
depends on ARCH_OMAP1
bool "OMAP16xx Based System"
+ select CPU_ARM926T
select ARCH_OMAP_OTG
comment "OMAP Board Type"
****************************************************************************/
static struct orion_ehci_data orion5x_ehci_data = {
.dram = &orion5x_mbus_dram_info,
+ .phy_version = EHCI_PHY_ORION,
};
static u64 ehci_dmamask = 0xffffffffUL;
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/i2c.h>
+#include <linux/ata_platform.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
.map_irq = dns323_pci_map_irq,
};
+static int __init dns323_dev_id(void)
+{
+ u32 dev, rev;
+
+ orion5x_pcie_id(&dev, &rev);
+
+ return dev;
+}
+
static int __init dns323_pci_init(void)
{
- if (machine_is_dns323())
+ /* The 5182 doesn't really use it's PCI bus, and initialising PCI
+ * gets in the way of initialising the SATA controller.
+ */
+ if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
pci_common_init(&dns323_pci);
return 0;
subsys_initcall(dns323_pci_init);
-/****************************************************************************
- * Ethernet
- */
-
-static struct mv643xx_eth_platform_data dns323_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
/****************************************************************************
* 8MiB NOR flash (Spansion S29GL064M90TFIR4)
*
.num_resources = 1,
};
+/****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+ if (n >= '0' && n <= '9')
+ return n - '0';
+
+ if (n >= 'A' && n <= 'F')
+ return n - 'A' + 10;
+
+ if (n >= 'a' && n <= 'f')
+ return n - 'a' + 10;
+
+ return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+ int hi;
+ int lo;
+
+ hi = dns323_parse_hex_nibble(b[0]);
+ lo = dns323_parse_hex_nibble(b[1]);
+
+ if (hi < 0 || lo < 0)
+ return -1;
+
+ return (hi << 4) | lo;
+}
+
+static int __init dns323_read_mac_addr(void)
+{
+ u_int8_t addr[6];
+ int i;
+ char *mac_page;
+
+ /* MAC address is stored as a regular ol' string in /dev/mtdblock4
+ * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
+ */
+ mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
+ if (!mac_page)
+ return -ENOMEM;
+
+ /* Sanity check the string we're looking at */
+ for (i = 0; i < 5; i++) {
+ if (*(mac_page + (i * 3) + 2) != ':') {
+ goto error_fail;
+ }
+ }
+
+ for (i = 0; i < 6; i++) {
+ int byte;
+
+ byte = dns323_parse_hex_byte(mac_page + (i * 3));
+ if (byte < 0) {
+ goto error_fail;
+ }
+
+ addr[i] = byte;
+ }
+
+ iounmap(mac_page);
+ printk("DNS323: Found ethernet MAC address: ");
+ for (i = 0; i < 6; i++)
+ printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+ memcpy(dns323_eth_data.mac_addr, addr, 6);
+
+ return 0;
+
+error_fail:
+ iounmap(mac_page);
+ return -EINVAL;
+}
+
/****************************************************************************
* GPIO LEDs (simple - doesn't use hardware blinking support)
*/
},
};
+/*****************************************************************************
+ * SATA
+ */
+static struct mv_sata_platform_data dns323_sata_data = {
+ .n_ports = 2,
+};
+
/****************************************************************************
* General Setup
*/
-static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
{ 0, MPP_PCIE_RST_OUTn },
{ 1, MPP_GPIO }, /* right amber LED (sata ch0) */
{ 2, MPP_GPIO }, /* left amber LED (sata ch1) */
{ -1 },
};
+static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
+ { 0, MPP_UNUSED },
+ { 1, MPP_GPIO }, /* right amber LED (sata ch0) */
+ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */
+ { 3, MPP_UNUSED },
+ { 4, MPP_GPIO }, /* power button LED */
+ { 5, MPP_GPIO }, /* power button LED */
+ { 6, MPP_GPIO }, /* GMT G751-2f overtemp */
+ { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */
+ { 8, MPP_GPIO }, /* triggers power off */
+ { 9, MPP_GPIO }, /* power button switch */
+ { 10, MPP_GPIO }, /* reset button switch */
+ { 11, MPP_UNUSED },
+ { 12, MPP_SATA_LED },
+ { 13, MPP_SATA_LED },
+ { 14, MPP_SATA_LED },
+ { 15, MPP_SATA_LED },
+ { 16, MPP_UNUSED },
+ { 17, MPP_UNUSED },
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
+};
+
/*
* On the DNS-323 the following devices are attached via I2C:
*
/* Setup basic Orion functions. Need to be called early. */
orion5x_init();
- orion5x_mpp_conf(dns323_mpp_modes);
- writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */
-
- /*
- * Configure peripherals.
+ /* Just to be tricky, the 5182 has a completely different
+ * set of MPP modes to the 5181.
*/
- orion5x_ehci0_init();
- orion5x_eth_init(&dns323_eth_data);
- orion5x_i2c_init();
- orion5x_uart0_init();
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ orion5x_mpp_conf(dns323_mv88f5182_mpp_modes);
+ else {
+ orion5x_mpp_conf(dns323_mv88f5181_mpp_modes);
+ writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */
+ }
/* setup flash mapping
* CS3 holds a 8 MB Spansion S29GL064M90TFIR4
i2c_register_board_info(0, dns323_i2c_devices,
ARRAY_SIZE(dns323_i2c_devices));
+ /*
+ * Configure peripherals.
+ */
+ if (dns323_read_mac_addr() < 0)
+ printk("DNS323: Failed to read MAC address\n");
+
+ orion5x_ehci0_init();
+ orion5x_eth_init(&dns323_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+
+ /* The 5182 has it's SATA controller on-chip, and needs it's own little
+ * init routine.
+ */
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ orion5x_sata_init(&dns323_sata_data);
+
/* register dns323 specific power-off method */
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+++ /dev/null
-/* empty */
__iounmap(addr);
}
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-
#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
#define __arch_iounmap(a) __arch_iounmap(a)
-#define __io(a) __io(a)
+#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
#endif
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <asm/dma-mapping.h>
-#include <asm/mach/dma.h>
#include <mach/clock.h>
static struct dma_channel {
#include "platform.h"
-#define MAX_DMA_ADDRESS 0xffffffff
-
#define MAX_DMA_CHANNELS 8
#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x80000000)
-
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
+#define PHYS_OFFSET UL(0x80000000)
#endif
config CPU_PXA930
bool "PXA930 (codename Tavor-P)"
+config CPU_PXA935
+ bool "PXA935 (codename Tavor-P65)"
+
endmenu
endif
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+config MACH_H5000
+ bool "HP iPAQ h5000"
+ select PXA25x
+
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
bool "Mitac Mio A701 Support"
select PXA27x
select IWMMXT
- select LEDS_GPIO
select HAVE_PWM
select GPIO_SYSFS
help
config PXA25x
bool
+ select CPU_XSCALE
help
Select code specific to PXA21x/25x/26x variants
config PXA27x
bool
+ select CPU_XSCALE
help
Select code specific to PXA27x variants
+config CPU_PXA26x
+ bool
+ select PXA25x
+ help
+ Select code specific to PXA26x (codename Dalhart)
+
config PXA3xx
bool
+ select CPU_XSC3
help
Select code specific to PXA3xx variants
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri.o
+obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
#include <mach/pxafb.h>
+#include "generic.h"
+
#include <video/metronomefb.h>
static unsigned int panel_type = 6;
.cleanup = am200_cleanup,
};
+static unsigned long am200_pin_config[] __initdata = {
+ GPIO51_GPIO,
+ GPIO49_GPIO,
+ GPIO48_GPIO,
+ GPIO32_GPIO,
+ GPIO17_GPIO,
+ GPIO16_GPIO,
+};
+
static int __init am200_init(void)
{
int ret;
* creation events */
fb_register_client(&am200_fb_notif);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
+
/* request our platform independent driver */
request_module("metronomefb");
#include <asm/clkdev.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
#include <mach/hardware.h>
#include "devices.h"
#include <mach/mfp-pxa300.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */
+
+ /* Standard I2C */
+ GPIO21_I2C_SCL,
+ GPIO22_I2C_SDA,
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/backlight.h>
static inline void corgi_init_spi(void) {}
#endif
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00120000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
&corgifb_device,
&corgikbd_device,
&corgiled_device,
+ &sharpsl_rom_device,
};
static void corgi_poweroff(void)
/* Define the refresh period in mSec for the SDRAM and the number of rows */
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
+static unsigned int sdram_rows;
#define CCLKCFG_TURBO 0x1
#define CCLKCFG_FCS 0x2
#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
#define MDREFR_DRI_MASK 0xFFF
+#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
+#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
+
/*
* PXA255 definitions
*/
static struct cpufreq_frequency_table
pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
+static unsigned int pxa255_turbo_table;
+module_param(pxa255_turbo_table, uint, 0);
+MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
+
/*
* PXA270 definitions
*
extern unsigned get_clk_frequency_khz(int info);
-static void find_freq_tables(struct cpufreq_policy *policy,
- struct cpufreq_frequency_table **freq_table,
+static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
pxa_freqs_t **pxa_freqs)
{
if (cpu_is_pxa25x()) {
- if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ if (!pxa255_turbo_table) {
*pxa_freqs = pxa255_run_freqs;
*freq_table = pxa255_run_freq_table;
- } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ } else {
*pxa_freqs = pxa255_turbo_freqs;
*freq_table = pxa255_turbo_freq_table;
- } else {
- printk("CPU PXA: Unknown policy found. "
- "Using CPUFREQ_POLICY_PERFORMANCE\n");
- *pxa_freqs = pxa255_run_freqs;
- *freq_table = pxa255_run_freq_table;
}
}
if (cpu_is_pxa27x()) {
}
}
+static void init_sdram_rows(void)
+{
+ uint32_t mdcnfg = MDCNFG;
+ unsigned int drac2 = 0, drac0 = 0;
+
+ if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
+ drac2 = MDCNFG_DRAC2(mdcnfg);
+
+ if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
+ drac0 = MDCNFG_DRAC0(mdcnfg);
+
+ sdram_rows = 1 << (11 + max(drac0, drac2));
+}
+
static u32 mdrefr_dri(unsigned int freq)
{
u32 dri = 0;
if (cpu_is_pxa25x())
- dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
+ dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
if (cpu_is_pxa27x())
- dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
+ dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
return dri;
}
pxa_freqs_t *pxa_freqs;
int ret;
- find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
+ find_freq_tables(&pxa_freqs_table, &pxa_freqs);
ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
if (freq_debug)
unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
/* Get the current policy */
- find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
+ find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
/* Lookup the next frequency */
if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
{
int i;
unsigned int freq;
+ struct cpufreq_frequency_table *pxa255_freq_table;
+ pxa_freqs_t *pxa255_freqs;
/* try to guess pxa27x cpu */
if (cpu_is_pxa27x())
pxa27x_guess_max_freq();
+ init_sdram_rows();
+
/* set default policy and cpuinfo */
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
policy->cur = get_clk_frequency_khz(0); /* current freq */
}
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+ pxa255_turbo_table = !!pxa255_turbo_table;
+
/* Generate the pxa27x cpufreq_frequency_table struct */
for (i = 0; i < NUM_PXA27x_FREQS; i++) {
freq = pxa27x_freqs[i].khz;
* Set the policy's minimum and maximum frequencies from the tables
* just constructed. This sets cpuinfo.mxx_freq, min and max.
*/
- if (cpu_is_pxa25x())
- cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
+ if (cpu_is_pxa25x()) {
+ find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
+ pr_info("PXA255 cpufreq using %s frequency table\n",
+ pxa255_turbo_table ? "turbo" : "run");
+ cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
+ }
else if (cpu_is_pxa27x())
cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <mach/gpio.h>
+#include <mach/pxa-regs.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/i2c.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
static struct resource pxa_resource_ffuart[] = {
{
- .start = __PREG(FFUART),
- .end = __PREG(FFUART) + 35,
+ .start = 0x40100000,
+ .end = 0x40100023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_FFUART,
static struct resource pxa_resource_btuart[] = {
{
- .start = __PREG(BTUART),
- .end = __PREG(BTUART) + 35,
+ .start = 0x40200000,
+ .end = 0x40200023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_BTUART,
static struct resource pxa_resource_stuart[] = {
{
- .start = __PREG(STUART),
- .end = __PREG(STUART) + 35,
+ .start = 0x40700000,
+ .end = 0x40700023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_STUART,
static struct resource pxa_resource_hwuart[] = {
{
- .start = __PREG(HWUART),
- .end = __PREG(HWUART) + 47,
+ .start = 0x41600000,
+ .end = 0x4160002F,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_HWUART,
.num_resources = ARRAY_SIZE(pxai2c_resources),
};
-static unsigned long pxa27x_i2c_mfp_cfg[] = {
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-};
-
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
- if (cpu_is_pxa27x())
- pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
pxa_register_device(&pxa_device_i2c, info);
}
+#ifdef CONFIG_PXA27x
+static struct resource pxa27x_resources_i2c_power[] = {
+ {
+ .start = 0x40f00180,
+ .end = 0x40f001a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_i2c_power = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = pxa27x_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa27x_resources_i2c_power),
+};
+#endif
+
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_resources_i2c_power[] = {
+ {
+ .start = 0x40f500c0,
+ .end = 0x40f500d3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = pxa3xx_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+#endif
+
static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
pxa_register_device(&pxa_device_ficp, info);
}
-struct platform_device pxa_device_rtc = {
+static struct resource pxa_rtc_resources[] = {
+ [0] = {
+ .start = 0x40900000,
+ .end = 0x40900000 + 0x3b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC1Hz,
+ .end = IRQ_RTC1Hz,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_RTCAlrm,
+ .end = IRQ_RTCAlrm,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device sa1100_device_rtc = {
.name = "sa1100-rtc",
.id = -1,
};
+struct platform_device pxa_device_rtc = {
+ .name = "pxa-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_rtc_resources),
+ .resource = pxa_rtc_resources,
+};
+
static struct resource pxa_ac97_resources[] = {
[0] = {
.start = 0x40500000,
extern struct platform_device pxa_device_i2c;
extern struct platform_device pxa_device_i2s;
extern struct platform_device pxa_device_ficp;
+extern struct platform_device sa1100_device_rtc;
extern struct platform_device pxa_device_rtc;
extern struct platform_device pxa_device_ac97;
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/pxa-regs.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/i2c.h>
+#include <mach/hardware.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa-regs.h>
GPIO91_USB_P3_1, /* ICL_XRXD */
GPIO56_USB_P3_4, /* ICL_VMOUT */
GPIO113_USB_P3_3, /* /ICL_VMIN */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
};
static void __init ezx_init(void)
#include "generic.h"
+#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
struct pxa_gpio_chip {
struct gpio_chip chip;
int pxa_last_gpio;
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+#define __gpio_is_inverted(gpio) (0)
+#endif
+
/*
* Configure pins for GPIO or other functions
*/
gpdr = pxa->regbase + GPDR_OFFSET;
local_irq_save(flags);
value = __raw_readl(gpdr);
- value &= ~mask;
+ if (__gpio_is_inverted(chip->base + offset))
+ value |= mask;
+ else
+ value &= ~mask;
__raw_writel(value, gpdr);
local_irq_restore(flags);
gpdr = pxa->regbase + GPDR_OFFSET;
local_irq_save(flags);
tmp = __raw_readl(gpdr);
- tmp |= mask;
+ if (__gpio_is_inverted(chip->base + offset))
+ tmp &= ~mask;
+ else
+ tmp |= mask;
__raw_writel(tmp, gpdr);
local_irq_restore(flags);
*/
static int __gpio_is_occupied(unsigned gpio)
{
- if (cpu_is_pxa25x() || cpu_is_pxa27x())
- return GAFR(gpio) & (0x3 << (((gpio) & 0xf) * 2));
- else
- return 0;
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ }
+
+ return 0;
}
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
/* Don't mess with enabled GPIOs using preconfigured edges or
* GPIOs set to alternate function or to output during probe
*/
- if ((GPIO_IRQ_rising_edge[idx] |
- GPIO_IRQ_falling_edge[idx] |
- GPDR(gpio)) & GPIO_bit(gpio))
+ if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
+ (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
return 0;
if (__gpio_is_occupied(gpio))
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
- GPDR(gpio) &= ~GPIO_bit(gpio);
+ if (__gpio_is_inverted(gpio))
+ GPDR(gpio) |= GPIO_bit(gpio);
+ else
+ GPDR(gpio) &= ~GPIO_bit(gpio);
if (type & IRQ_TYPE_EDGE_RISING)
__set_bit(gpio, GPIO_IRQ_rising_edge);
GPIO6_MMC_CLK,
GPIO53_MMC_CLK,
GPIO8_MMC_CS0,
- /* these are used by AM200EPD */
- GPIO51_GPIO,
- GPIO49_GPIO,
- GPIO48_GPIO,
- GPIO32_GPIO,
- GPIO17_GPIO,
- GPIO16_GPIO,
};
static void __init gumstix_init(void)
--- /dev/null
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright 2000-2003 Hewlett-Packard Company.
+ * Copyright 2002 Jamey Hicks <jamey.hicks@hp.com>
+ * Copyright 2004-2005 Phil Blundell <pb@handhelds.org>
+ * Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/h5000.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/udc.h>
+#include "generic.h"
+
+/*
+ * Flash
+ */
+
+static struct mtd_partition h5000_flash0_partitions[] = {
+ {
+ .name = "bootldr",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "root",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct mtd_partition h5000_flash1_partitions[] = {
+ {
+ .name = "second root",
+ .size = SZ_16M - 0x00040000,
+ .offset = 0,
+ },
+ {
+ .name = "asset",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data h5000_flash0_data = {
+ .width = 4,
+ .parts = h5000_flash0_partitions,
+ .nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
+};
+
+static struct physmap_flash_data h5000_flash1_data = {
+ .width = 4,
+ .parts = h5000_flash1_partitions,
+ .nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
+};
+
+static struct resource h5000_flash0_resources = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct resource h5000_flash1_resources = {
+ .start = PXA_CS0_PHYS + SZ_32M,
+ .end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device h5000_flash[] = {
+ {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &h5000_flash0_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &h5000_flash0_data,
+ },
+ },
+ {
+ .name = "physmap-flash",
+ .id = 1,
+ .resource = &h5000_flash1_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &h5000_flash1_data,
+ },
+ },
+};
+
+/*
+ * USB Device Controller
+ */
+
+static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
+ .gpio_pullup = H5000_GPIO_USB_PULLUP,
+};
+
+/*
+ * GPIO setup
+ */
+
+static unsigned long h5000_pin_config[] __initdata = {
+ /* Crystal and Clock Signals */
+ GPIO12_32KHz,
+
+ /* SDRAM and Static Memory I/O Signals */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+};
+
+/*
+ * Localbus setup:
+ * CS0: Flash;
+ * CS1: MediaQ chip, select 16-bit bus and vlio;
+ * CS5: SAMCOP.
+ */
+
+static void fix_msc(void)
+{
+ MSC0 = 0x129c24f2;
+ MSC1 = 0x7ff424fa;
+ MSC2 = 0x7ff47ff4;
+
+ MDREFR |= 0x02080000;
+}
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &h5000_flash[0],
+ &h5000_flash[1],
+};
+
+static void __init h5000_init(void)
+{
+ fix_msc();
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+ pxa_set_udc_info(&h5000_udc_mach_info);
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+}
+
+MACHINE_START(H5400, "HP iPAQ H5000")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = h5000_init,
+MACHINE_END
DMA_PRIO_LOW = 2
} pxa_dma_prio;
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK 1
-#endif
-
/*
* DMA registration
*/
--- /dev/null
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright(20)02 Hewlett-Packard Company.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks
+ */
+
+#ifndef __ASM_ARCH_H5000_H
+#define __ASM_ARCH_H5000_H
+
+#include <mach/mfp-pxa25x.h>
+
+/*
+ * CPU GPIOs
+ */
+
+#define H5000_GPIO_POWER_BUTTON (0)
+#define H5000_GPIO_RESET_BUTTON_N (1)
+#define H5000_GPIO_OPT_INT (2)
+#define H5000_GPIO_BACKUP_POWER (3)
+#define H5000_GPIO_ACTION_BUTTON (4)
+#define H5000_GPIO_COM_DCD_SOMETHING (5) /* what is this really ? */
+/* 6 not connected */
+#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
+/* 8 not connected */
+#define H5000_GPIO_RSO_N (9) /* reset output from max1702 which regulates 3.3 and 2.5 */
+#define H5000_GPIO_ASIC_INT_N (10) /* from companion asic */
+#define H5000_GPIO_BT_ENV_0 (11) /* to LMX9814, set to 1 according to regdump */
+/*(12) not connected */
+#define H5000_GPIO_BT_ENV_1 (13) /* to LMX9814, set to 1 according to regdump */
+#define H5000_GPIO_BT_WU (14) /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
+/*(15) is CS1# */
+/*(16) not connected */
+/*(17) not connected */
+/*(18) is pcmcia ready */
+/*(19) is dreq1 */
+/*(20) is dreq0 */
+#define H5000_GPIO_OE_RD_NWR (21) /* output enable on rd/nwr signal to companion asic */
+/*(22) is not connected */
+#define H5000_GPIO_OPT_SPI_CLK (23) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_CS_N (24) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DOUT (25) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DIN (26) /* to extension pack */
+/*(27) not connected */
+#define H5000_GPIO_I2S_BITCLK (28) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAOUT (29) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAIN (30) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_LRCLK (31) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_SYSCLK (32) /* connected to AC97 codec */
+/*(33) is CS5# */
+#define H5000_GPIO_COM_RXD (34) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_CTS (35) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DCD (36) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DSR (37) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RI (38) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_TXD (39) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DTR (40) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RTS (41) /* connected to cradle/cable connector */
+
+#define H5000_GPIO_BT_RXD (42) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_TXD (43) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_CTS (44) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_RTS (45) /* connected to BT (LMX9814) */
+
+#define H5000_GPIO_IRDA_RXD (46)
+#define H5000_GPIO_IRDA_TXD (47)
+
+#define H5000_GPIO_POE_N (48) /* used for pcmcia */
+#define H5000_GPIO_PWE_N (49) /* used for pcmcia */
+#define H5000_GPIO_PIOR_N (50) /* used for pcmcia */
+#define H5000_GPIO_PIOW_N (51) /* used for pcmcia */
+#define H5000_GPIO_PCE1_N (52) /* used for pcmcia */
+#define H5000_GPIO_PCE2_N (53) /* used for pcmcia */
+#define H5000_GPIO_PSKTSEL (54) /* used for pcmcia */
+#define H5000_GPIO_PREG_N (55) /* used for pcmcia */
+#define H5000_GPIO_PWAIT_N (56) /* used for pcmcia */
+#define H5000_GPIO_IOIS16_N (57) /* used for pcmcia */
+
+#define H5000_GPIO_IRDA_SD (58) /* to hsdl3002 sd */
+/*(59) not connected */
+#define H5000_GPIO_POWER_SD_N (60) /* controls power to SD */
+#define H5000_GPIO_POWER_RS232_N (61) /* inverted FORCEON to rs232 transceiver */
+#define H5000_GPIO_POWER_ACCEL_N (62) /* controls power to accel */
+/*(63) is not connected */
+#define H5000_GPIO_OPT_NVRAM (64) /* controls power to expansion pack */
+#define H5000_GPIO_CHG_EN (65) /* to sc801 en */
+#define H5000_GPIO_USB_PULLUP (66) /* USB d+ pullup via 1.5K resistor */
+#define H5000_GPIO_BT_2V8_N (67) /* 2.8V used by bluetooth */
+#define H5000_GPIO_EXT_CHG_RATE (68) /* enables external charging rate */
+/*(69) is not connected */
+#define H5000_GPIO_CIR_RESET (70) /* consumer IR reset */
+#define H5000_GPIO_POWER_LIGHT_SENSOR_N (71)
+#define H5000_GPIO_BT_M_RESET (72)
+#define H5000_GPIO_STD_CHG_RATE (73)
+#define H5000_GPIO_SD_WP_N (74)
+#define H5000_GPIO_MOTOR_ON_N (75) /* external pullup on this */
+#define H5000_GPIO_HEADPHONE_DETECT (76)
+#define H5000_GPIO_USB_CHG_RATE (77) /* select rate for charging via usb */
+/*(78) is CS2# */
+/*(79) is CS3# */
+/*(80) is CS4# */
+
+#endif /* __ASM_ARCH_H5000_H */
* PXA930 B0 0x69056835 0x5E643013
* PXA930 B1 0x69056837 0x7E643013
* PXA930 B2 0x69056838 0x8E643013
+ *
+ * PXA935 A0 0x56056931 0x1E653013
+ * PXA935 B0 0x56056936 0x6E653013
*/
#ifdef CONFIG_PXA25x
#define __cpu_is_pxa210(id) \
#define __cpu_is_pxa930(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x683; \
+ _id == 0x683; \
})
#else
#define __cpu_is_pxa930(id) (0)
#endif
+#ifdef CONFIG_CPU_PXA935
+#define __cpu_is_pxa935(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x693; \
+ })
+#else
+#define __cpu_is_pxa935(id) (0)
+#endif
+
#define cpu_is_pxa210() \
({ \
__cpu_is_pxa210(read_cpuid_id()); \
__cpu_is_pxa25x(read_cpuid_id()); \
})
-extern int cpu_is_pxa26x(void);
-
#define cpu_is_pxa27x() \
({ \
__cpu_is_pxa27x(read_cpuid_id()); \
__cpu_is_pxa930(id); \
})
+#define cpu_is_pxa935() \
+ ({ \
+ unsigned int id = read_cpuid(CPUID_ID); \
+ __cpu_is_pxa935(id); \
+ })
+
/*
* CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
_id == 0x3; \
})
+#define __cpu_is_pxa9xx(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x683 || _id == 0x693; \
+ })
+
#define cpu_is_pxa2xx() \
({ \
__cpu_is_pxa2xx(read_cpuid_id()); \
__cpu_is_pxa3xx(read_cpuid_id()); \
})
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
+#define cpu_is_pxa9xx() \
+ ({ \
+ __cpu_is_pxa9xx(read_cpuid_id()); \
+ })
/*
* return current memory and LCD clock frequency in units of 10kHz
*/
#define PCIBIOS_MIN_IO 0
#define PCIBIOS_MIN_MEM 0
#define pcibios_assign_all_busses() 1
+#define HAVE_ARCH_PCI_SET_DMA_MASK 1
#endif
+
#endif /* _ASM_ARCH_HARDWARE_H */
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
*/
#define PHYS_OFFSET UL(0xa0000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* The nodes are matched with the physical SDRAM banks as follows:
*
cmx2xx_pci_adjust_zones(node, size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
#endif
#endif
#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO */
+#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF1)
+#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF1)
+#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF1)
+
+/* SDRAM */
+#define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
+#define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
+#define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
+#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+
+/* USB */
+#define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1)
+#define GPIO32_USB_VP MFP_CFG_IN(GPIO32, AF2)
+#define GPIO34_USB_VM MFP_CFG_IN(GPIO34, AF2)
+#define GPIO39_USB_VPO MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
+#define GPIO56_USB_VMO MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO57_USB_nOE MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
+
+/* ASSP */
+#define GPIO28_ASSP_BITCLK_IN MFP_CFG_IN(GPIO28, AF3)
+#define GPIO28_ASSP_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
+#define GPIO29_ASSP_RXD MFP_CFG_IN(GPIO29, AF3)
+#define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1)
+#define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#endif
+
#endif /* __ASM_ARCH_MFP_PXA25X_H */
#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
+/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
+ * bit is set, regardless of the GPIO configuration
+ */
+#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
+
/* GPIO */
#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
(MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
/* Global GPIOs */
-#define GPIO9_CHARGE_nEN 9
+#define GPIO9_CHARGE_EN 9
#define GPIO18_POWEROFF 18
#define GPIO87_LCD_POWER 87
+#define GPIO96_AC_DETECT 96
+#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
/* USB */
-#define GPIO13_USB_DETECT 13
+#define GPIO13_nUSB_DETECT 13
#define GPIO22_USB_ENABLE 22
/* SDIO bits */
#define GPIO91_SDIO_EN 91
/* Bluetooth */
+#define GPIO14_BT_nACTIVITY 14
#define GPIO83_BT_ON 83
+#define GPIO77_BT_UNKNOWN1 77
+#define GPIO86_BT_MAYBE_nRESET 86
/* GPS */
#define GPIO23_GPS_UNKNOWN1 23
#ifndef __ARCH_PXA_MTD_XIP_H__
#define __ARCH_PXA_MTD_XIP_H__
+#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#define xip_irqpending() (ICIP & ICMR)
#ifndef __PXA_REGS_H
#define __PXA_REGS_H
+#include <mach/hardware.h>
/*
* PXA Chip selects
#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART FFRBR
-#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
-#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
-#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
-#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
-#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
-#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
-#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
-#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
-#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
-#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
-#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
-#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART BTRBR
-#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
-#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
-#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
-#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
-#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
-#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
-#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
-#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
-#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
-#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
-#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
-#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART STRBR
-#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
-#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
-#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
-#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
-#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
-#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
-#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
-#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
-#define STMSR __REG(0x40700018) /* Reserved */
-#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
-#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
-#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART HWRBR
-#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
-#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
-#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
-#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
-#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
-#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
-#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
-#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
-#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
-#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
-#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
-#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
-#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
-#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
-#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE (1 << 7) /* DMA Requests Enable */
-#define IER_UUE (1 << 6) /* UART Unit Enable */
-#define IER_NRZE (1 << 5) /* NRZ coding Enable */
-#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
-#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
-#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
-#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
-#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
-#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
-#define IIR_TOD (1 << 3) /* Time Out Detected */
-#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
-#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
-#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
-
-#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
-#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
-#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
-#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
-#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1 (0)
-#define FCR_ITL_8 (FCR_ITL1)
-#define FCR_ITL_16 (FCR_ITL2)
-#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
-#define LCR_SB (1 << 6) /* Set Break */
-#define LCR_STKYP (1 << 5) /* Sticky Parity */
-#define LCR_EPS (1 << 4) /* Even Parity Select */
-#define LCR_PEN (1 << 3) /* Parity Enable */
-#define LCR_STB (1 << 2) /* Stop Bit */
-#define LCR_WLS1 (1 << 1) /* Word Length Select */
-#define LCR_WLS0 (1 << 0) /* Word Length Select */
-
-#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
-#define LSR_TEMT (1 << 6) /* Transmitter Empty */
-#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
-#define LSR_BI (1 << 4) /* Break Interrupt */
-#define LSR_FE (1 << 3) /* Framing Error */
-#define LSR_PE (1 << 2) /* Parity Error */
-#define LSR_OE (1 << 1) /* Overrun Error */
-#define LSR_DR (1 << 0) /* Data Ready */
-
-#define MCR_LOOP (1 << 4)
-#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
-#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
-#define MCR_RTS (1 << 1) /* Request to Send */
-#define MCR_DTR (1 << 0) /* Data Terminal Ready */
-
-#define MSR_DCD (1 << 7) /* Data Carrier Detect */
-#define MSR_RI (1 << 6) /* Ring Indicator */
-#define MSR_DSR (1 << 5) /* Data Set Ready */
-#define MSR_CTS (1 << 4) /* Clear To Send */
-#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
-#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
-#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
-#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
-#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
-#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
-#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
-#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
-
-
-/*
- * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
- */
-
-/*
- * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
- */
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR __REG(0x40500000) /* PCM Out Control Register */
-#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define PICR __REG(0x40500004) /* PCM In Control Register */
-#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MCCR __REG(0x40500008) /* Mic In Control Register */
-#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define GCR __REG(0x4050000C) /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
-#endif
-#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
-#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
-#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
-#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
-#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
-
-#define POSR __REG(0x40500010) /* PCM Out Status Register */
-#define POSR_FIFOE (1 << 4) /* FIFO error */
-#define POSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define PISR __REG(0x40500014) /* PCM In Status Register */
-#define PISR_FIFOE (1 << 4) /* FIFO error */
-#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MCSR __REG(0x40500018) /* Mic In Status Register */
-#define MCSR_FIFOE (1 << 4) /* FIFO error */
-#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define GSR __REG(0x4050001C) /* Global Status Register */
-#define GSR_CDONE (1 << 19) /* Command Done */
-#define GSR_SDONE (1 << 18) /* Status Done */
-#define GSR_RDCS (1 << 15) /* Read Completion Status */
-#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
-#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
-#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
-#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
-#define GSR_PCR (1 << 8) /* Primary Codec Ready */
-#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
-#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
-#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
-#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
-#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
-#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
-#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
-
-#define CAR __REG(0x40500020) /* CODEC Access Register */
-#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
-
-#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
-#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
-
-#define MOCR __REG(0x40500100) /* Modem Out Control Register */
-#define MOCR_FEIE (1 << 3) /* FIFO Error */
-#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MICR __REG(0x40500108) /* Modem In Control Register */
-#define MICR_FEIE (1 << 3) /* FIFO Error */
-#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MOSR __REG(0x40500110) /* Modem Out Status Register */
-#define MOSR_FIFOE (1 << 4) /* FIFO error */
-#define MOSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MISR __REG(0x40500118) /* Modem In Status Register */
-#define MISR_FIFOE (1 << 4) /* FIFO error */
-#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
-#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
-#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
-#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
-
-
-/*
- * Fast Infrared Communication Port
- */
-
-#define FICP __REG(0x40800000) /* Start of FICP area */
-#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
-#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
-#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
-#define ICDR __REG(0x4080000c) /* ICP Data Register */
-#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
-#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
-
-#define ICCR0_AME (1 << 7) /* Address match enable */
-#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
-#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
-#define ICCR0_RXE (1 << 4) /* Receive enable */
-#define ICCR0_TXE (1 << 3) /* Transmit enable */
-#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
-#define ICCR0_LBM (1 << 1) /* Loopback mode */
-#define ICCR0_ITR (1 << 0) /* IrDA transmission */
-
-#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
-#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
-#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
-#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
-#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
-#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
-
-#ifdef CONFIG_PXA27x
-#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
-#endif
-#define ICSR0_FRE (1 << 5) /* Framing error */
-#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
-#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
-#define ICSR0_RAB (1 << 2) /* Receiver abort */
-#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
-#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
-
-#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
-#define ICSR1_CRE (1 << 5) /* CRC error */
-#define ICSR1_EOF (1 << 4) /* End of frame */
-#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
-#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
-#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
-#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
-
-
/*
* Real Time Clock
*/
#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
-/*
- * Pulse Width Modulator
- */
-
-#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
-#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
-
-#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
-#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
-
-
/*
* Interrupt Controller
*/
* General Purpose I/O
*/
-#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
-
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-/* Interrupt Controller */
-
#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
-/*
- * Power Manager - see pxa2xx-regs.h
- */
-
-/*
- * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
- */
-
-/*
- * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
- */
-
-/*
- * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
- */
-
-#ifdef CONFIG_PXA27x
-
-/* Camera Interface */
-#define CICR0 __REG(0x50000000)
-#define CICR1 __REG(0x50000004)
-#define CICR2 __REG(0x50000008)
-#define CICR3 __REG(0x5000000C)
-#define CICR4 __REG(0x50000010)
-#define CISR __REG(0x50000014)
-#define CIFR __REG(0x50000018)
-#define CITOR __REG(0x5000001C)
-#define CIBR0 __REG(0x50000028)
-#define CIBR1 __REG(0x50000030)
-#define CIBR2 __REG(0x50000038)
-
-#define CICR0_DMAEN (1 << 31) /* DMA request enable */
-#define CICR0_PAR_EN (1 << 30) /* Parity enable */
-#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
-#define CICR0_ENB (1 << 28) /* Camera interface enable */
-#define CICR0_DIS (1 << 27) /* Camera interface disable */
-#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
-#define CICR0_TOM (1 << 9) /* Time-out mask */
-#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
-#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
-#define CICR0_EOLM (1 << 6) /* End-of-line mask */
-#define CICR0_PERRM (1 << 5) /* Parity-error mask */
-#define CICR0_QDM (1 << 4) /* Quick-disable mask */
-#define CICR0_CDM (1 << 3) /* Disable-done mask */
-#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
-#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
-#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
-
-#define CICR1_TBIT (1 << 31) /* Transparency bit */
-#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */
-#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
-#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
-#define CICR1_RGB_F (1 << 11) /* RGB format */
-#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
-#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
-#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
-#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
-#define CICR1_DW (0x7 << 0) /* Data width mask */
-
-#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
- wait count mask */
-#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
- wait count mask */
-#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
-#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
- wait count mask */
-#define CICR2_FSW (0x7 << 0) /* Frame stabilization
- wait count mask */
-
-#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
- wait count mask */
-#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
- wait count mask */
-#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
-#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
- wait count mask */
-#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
-
-#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
-#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
-#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
-#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
-#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
-#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
-#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
-#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
-
-#define CISR_FTO (1 << 15) /* FIFO time-out */
-#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
-#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
-#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
-#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
-#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
-#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
-#define CISR_EOL (1 << 8) /* End of line */
-#define CISR_PAR_ERR (1 << 7) /* Parity error */
-#define CISR_CQD (1 << 6) /* Camera interface quick disable */
-#define CISR_CDD (1 << 5) /* Camera interface disable done */
-#define CISR_SOF (1 << 4) /* Start of frame */
-#define CISR_EOF (1 << 3) /* End of frame */
-#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
-#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
-#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
-
-#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
-#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
-#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
-#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
-#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
-#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
-#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
-#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
-
-#define SRAM_SIZE 0x40000 /* 4x64K */
-
-#define SRAM_MEM_PHYS 0x5C000000
-
-#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */
-#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */
-
-#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */
-#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */
-#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */
-#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */
-
-#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */
-#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */
-#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */
-#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */
-
-#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */
-#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */
-#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */
-#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */
-
-#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */
-#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */
-#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */
-#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */
-
-#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */
-#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */
-#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */
-#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */
-
-#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */
-
-#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */
-#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */
-#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */
-
-#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */
-#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */
-#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */
-
-#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */
-#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */
-#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */
-
-#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */
-#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */
-#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */
-
-#endif
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE 0x1
-#define PWRMODE_STANDBY 0x2
-#define PWRMODE_SLEEP 0x3
-#define PWRMODE_DEEPSLEEP 0x7
#endif
#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN)
#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN)
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
+
#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE 0x1
+#define PWRMODE_STANDBY 0x2
+#define PWRMODE_SLEEP 0x3
+#define PWRMODE_DEEPSLEEP 0x7
+
#endif
--- /dev/null
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR __REG(0x40500000) /* PCM Out Control Register */
+#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define PICR __REG(0x40500004) /* PCM In Control Register */
+#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MCCR __REG(0x40500008) /* Mic In Control Register */
+#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define GCR __REG(0x4050000C) /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
+#endif
+#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
+#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
+#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
+#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
+
+#define POSR __REG(0x40500010) /* PCM Out Status Register */
+#define POSR_FIFOE (1 << 4) /* FIFO error */
+#define POSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define PISR __REG(0x40500014) /* PCM In Status Register */
+#define PISR_FIFOE (1 << 4) /* FIFO error */
+#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MCSR __REG(0x40500018) /* Mic In Status Register */
+#define MCSR_FIFOE (1 << 4) /* FIFO error */
+#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define GSR __REG(0x4050001C) /* Global Status Register */
+#define GSR_CDONE (1 << 19) /* Command Done */
+#define GSR_SDONE (1 << 18) /* Status Done */
+#define GSR_RDCS (1 << 15) /* Read Completion Status */
+#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
+#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
+#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
+#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
+#define GSR_PCR (1 << 8) /* Primary Codec Ready */
+#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
+#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
+#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
+#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
+#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
+#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
+#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
+
+#define CAR __REG(0x40500020) /* CODEC Access Register */
+#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
+
+#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
+#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
+
+#define MOCR __REG(0x40500100) /* Modem Out Control Register */
+#define MOCR_FEIE (1 << 3) /* FIFO Error */
+#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MICR __REG(0x40500108) /* Modem In Control Register */
+#define MICR_FEIE (1 << 3) /* FIFO Error */
+#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MOSR __REG(0x40500110) /* Modem Out Status Register */
+#define MOSR_FIFOE (1 << 4) /* FIFO error */
+#define MOSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MISR __REG(0x40500118) /* Modem In Status Register */
+#define MISR_FIFOE (1 << 4) /* FIFO error */
+#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
+#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
+#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
+#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */
--- /dev/null
+#ifndef __ASM_ARCH_REGS_UART_H
+#define __ASM_ARCH_REGS_UART_H
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART FFRBR
+#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
+#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
+#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
+#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
+#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
+#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
+#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
+#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
+#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
+#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
+#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
+#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART BTRBR
+#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
+#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
+#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
+#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
+#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
+#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
+#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
+#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
+#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
+#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
+#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
+#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART STRBR
+#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
+#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
+#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
+#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
+#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
+#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
+#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
+#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
+#define STMSR __REG(0x40700018) /* Reserved */
+#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
+#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
+#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART HWRBR
+#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
+#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
+#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
+#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
+#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
+#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
+#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
+#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
+#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
+#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
+#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
+#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
+#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
+#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
+#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4)
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
+#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
+#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
+#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
+#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
+
+#endif /* __ASM_ARCH_REGS_UART_H */
*/
#include <linux/serial_reg.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
#include <asm/mach-types.h>
#define __REG(x) ((volatile unsigned long *)x)
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/smc91x.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa300.h>
-#include <mach/gpio.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
GPIO107_GPIO, /* DS1WM_IRQ */
GPIO108_GPIO, /* GSM_READY */
GPIO115_GPIO, /* nPEN_IRQ */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
};
/*
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
/* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
unsigned valid : 1;
unsigned can_wakeup : 1;
unsigned keypad_gpio : 1;
+ unsigned dir_inverted : 1;
unsigned int mask; /* bit mask in PWER or PKWR */
+ unsigned int mux_mask; /* bit mask of muxed gpio bits, 0 if no mux */
unsigned long config;
};
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
-static int gpio_nr;
static unsigned long gpdr_lpm[4];
int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
int shft = (gpio & 0xf) << 1;
int fn = MFP_AF(c);
- int dir = c & MFP_DIR_OUT;
+ int is_out = (c & MFP_DIR_OUT) ? 1 : 0;
if (fn > 3)
return -EINVAL;
else
GAFR_U(bank) = gafr;
- if (dir == MFP_DIR_OUT)
+ if (is_out ^ gpio_desc[gpio].dir_inverted)
GPDR(gpio) |= mask;
else
GPDR(gpio) &= ~mask;
switch (c & MFP_LPM_STATE_MASK) {
case MFP_LPM_DRIVE_HIGH:
PGSR(bank) |= mask;
- dir = MFP_DIR_OUT;
+ is_out = 1;
break;
case MFP_LPM_DRIVE_LOW:
PGSR(bank) &= ~mask;
- dir = MFP_DIR_OUT;
+ is_out = 1;
break;
case MFP_LPM_DEFAULT:
break;
break;
}
- if (dir == MFP_DIR_OUT)
+ if (is_out ^ gpio_desc[gpio].dir_inverted)
gpdr_lpm[bank] |= mask;
else
gpdr_lpm[bank] &= ~mask;
return -EINVAL;
}
- if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) {
+ if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
pr_warning("%s: output GPIO%d unable to wakeup\n",
__func__, gpio);
return -EINVAL;
int gpio_set_wake(unsigned int gpio, unsigned int on)
{
struct gpio_desc *d;
- unsigned long c;
+ unsigned long c, mux_taken;
if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
return -EINVAL;
if (d->keypad_gpio)
return -EINVAL;
+ mux_taken = (PWER & d->mux_mask) & (~d->mask);
+ if (on && mux_taken)
+ return -EBUSY;
+
if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
if (on) {
- PWER |= d->mask;
+ PWER = (PWER & ~d->mux_mask) | d->mask;
if (c & MFP_LPM_EDGE_RISE)
PRER |= d->mask;
{
int i;
- for (i = 0; i <= 84; i++)
+ for (i = 0; i <= pxa_last_gpio; i++)
gpio_desc[i].valid = 1;
for (i = 0; i <= 15; i++) {
gpio_desc[i].mask = GPIO_bit(i);
}
- gpio_nr = 85;
+ /* PXA26x has additional 4 GPIOs (86/87/88/89) which has the
+ * direction bit inverted in GPDR2. See PXA26x DM 4.1.1.
+ */
+ for (i = 86; i <= pxa_last_gpio; i++)
+ gpio_desc[i].dir_inverted = 1;
}
#else
static inline void pxa25x_mfp_init(void) {}
return 0;
}
+#define PWER_WEMUX2_GPIO38 (1 << 16)
+#define PWER_WEMUX2_GPIO53 (2 << 16)
+#define PWER_WEMUX2_GPIO40 (3 << 16)
+#define PWER_WEMUX2_GPIO36 (4 << 16)
+#define PWER_WEMUX2_MASK (7 << 16)
+#define PWER_WEMUX3_GPIO31 (1 << 19)
+#define PWER_WEMUX3_GPIO113 (2 << 19)
+#define PWER_WEMUX3_MASK (3 << 19)
+
+#define INIT_GPIO_DESC_MUXED(mux, gpio) \
+do { \
+ gpio_desc[(gpio)].can_wakeup = 1; \
+ gpio_desc[(gpio)].mask = PWER_ ## mux ## _GPIO ##gpio; \
+ gpio_desc[(gpio)].mux_mask = PWER_ ## mux ## _MASK; \
+} while (0)
+
static void __init pxa27x_mfp_init(void)
{
int i, gpio;
- for (i = 0; i <= 120; i++) {
+ for (i = 0; i <= pxa_last_gpio; i++) {
/* skip GPIO2, 5, 6, 7, 8, they are not
* valid pins allow configuration
*/
gpio_desc[35].can_wakeup = 1;
gpio_desc[35].mask = PWER_WE35;
- gpio_nr = 121;
+ INIT_GPIO_DESC_MUXED(WEMUX3, 31);
+ INIT_GPIO_DESC_MUXED(WEMUX3, 113);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 38);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 53);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 40);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 36);
}
#else
static inline void pxa27x_mfp_init(void) {}
{
int i;
- for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
{
int i;
- for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
pxa27x_mfp_init();
/* initialize gafr_run[], pgsr_lpm[] from existing values */
- for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
return sysdev_class_register(&pxa2xx_mfp_sysclass);
#include <linux/irq.h>
#include <linux/pda_power.h>
#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
+#include <linux/wm97xx_batt.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <media/soc_camera.h>
#include <mach/mioa701.h>
static unsigned long mioa701_pin_config[] = {
/* Mio global */
- MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+ MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
/* Backlight PWM 0 */
GPIO16_PWM0_OUT,
MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
/* USB */
- MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+ MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
/* LCD */
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
+ /* QCI */
+ GPIO12_CIF_DD_7,
+ GPIO17_CIF_DD_6,
+ GPIO50_CIF_DD_3,
+ GPIO51_CIF_DD_2,
+ GPIO52_CIF_DD_4,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO55_CIF_DD_1,
+ GPIO81_CIF_DD_0,
+ GPIO82_CIF_DD_5,
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+
/* Bluetooth */
+ MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
GPIO44_BTUART_CTS,
GPIO42_BTUART_RXD,
GPIO45_BTUART_RTS,
GPIO43_BTUART_TXD,
MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
/* GPS */
MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
/* Unknown */
- MFP_CFG_IN(GPIO14, AF0),
MFP_CFG_IN(GPIO20, AF0),
MFP_CFG_IN(GPIO21, AF0),
MFP_CFG_IN(GPIO33, AF0),
MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
- MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
- MFP_CFG_IN(GPIO80, AF0),
- MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
MFP_CFG_IN(GPIO96, AF0),
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
};
static int is_usb_connected(void)
{
- return !!gpio_get_value(GPIO13_USB_DETECT);
+ return !gpio_get_value(GPIO13_nUSB_DETECT);
}
static struct pxa2xx_udc_mach_info mioa701_udc_info = {
u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
/* Devices prepare suspend */
- is_bt_on = gpio_get_value(GPIO83_BT_ON);
+ is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
"mioa701_battery"
};
+static int is_ac_connected(void)
+{
+ return gpio_get_value(GPIO96_AC_DETECT);
+}
+
static void mioa701_set_charge(int flags)
{
- gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+ gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
}
static struct pda_power_pdata power_pdata = {
- .is_ac_online = is_usb_connected,
+ .is_ac_online = is_ac_connected,
+ .is_usb_online = is_usb_connected,
.set_charge = mioa701_set_charge,
.supplied_to = supplicants,
.num_supplicants = ARRAY_SIZE(supplicants),
static struct resource power_resources[] = {
[0] = {
.name = "ac",
- .start = gpio_to_irq(GPIO13_USB_DETECT),
- .end = gpio_to_irq(GPIO13_USB_DETECT),
+ .start = gpio_to_irq(GPIO96_AC_DETECT),
+ .end = gpio_to_irq(GPIO96_AC_DETECT),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+ [1] = {
+ .name = "usb",
+ .start = gpio_to_irq(GPIO13_nUSB_DETECT),
+ .end = gpio_to_irq(GPIO13_nUSB_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
},
};
-#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
-static struct wm97xx *battery_wm;
-
-static enum power_supply_property battery_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
- POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, /* Necessary for apm */
+static struct wm97xx_batt_info mioa701_battery_data = {
+ .batt_aux = WM97XX_AUX_ID1,
+ .temp_aux = -1,
+ .charge_gpio = -1,
+ .min_voltage = 0xc00,
+ .max_voltage = 0xfc0,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
+ .batt_div = 1,
+ .batt_mult = 1,
+ .batt_name = "mioa701_battery",
};
-static int get_battery_voltage(void)
-{
- int adc = -1;
-
- if (battery_wm)
- adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
- return adc;
-}
-
-static int get_battery_status(struct power_supply *b)
-{
- int status;
-
- if (is_usb_connected())
- status = POWER_SUPPLY_STATUS_CHARGING;
- else
- status = POWER_SUPPLY_STATUS_DISCHARGING;
-
- return status;
-}
-
-static int get_property(struct power_supply *b,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- int rc = 0;
-
- switch (psp) {
- case POWER_SUPPLY_PROP_STATUS:
- val->intval = get_battery_status(b);
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- val->intval = 0xfd0;
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
- val->intval = 0xc00;
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- val->intval = get_battery_voltage();
- break;
- case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
- val->intval = 100;
- break;
- default:
- val->intval = -1;
- rc = -1;
- }
-
- return rc;
+/*
+ * Camera interface
+ */
+struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 5000,
};
-static struct power_supply battery_ps = {
- .name = "mioa701_battery",
- .type = POWER_SUPPLY_TYPE_BATTERY,
- .get_property = get_property,
- .properties = battery_props,
- .num_properties = ARRAY_SIZE(battery_props),
+static struct soc_camera_link iclink = {
+ .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
};
-static int battery_probe(struct platform_device *pdev)
-{
- struct wm97xx *wm = platform_get_drvdata(pdev);
- int rc;
-
- battery_wm = wm;
-
- rc = power_supply_register(NULL, &battery_ps);
- if (rc)
- dev_err(&pdev->dev,
- "Could not register mioa701 battery -> %d\n", rc);
- return rc;
-}
-
-static int battery_remove(struct platform_device *pdev)
-{
- battery_wm = NULL;
- return 0;
-}
-
-static struct platform_driver mioa701_battery_driver = {
- .driver = {
- .name = "wm97xx-battery",
+/* Board I2C devices. */
+static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+ {
+ /* Must initialize before the camera(s) */
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+ .platform_data = &iclink,
},
- .probe = battery_probe,
- .remove = battery_remove
};
-static int __init mioa701_battery_init(void)
-{
- int rc;
-
- rc = platform_driver_register(&mioa701_battery_driver);
- if (rc)
- printk(KERN_ERR "Could not register mioa701 battery driver\n");
- return rc;
-}
-
-#else
-static int __init mioa701_battery_init(void)
-{
- return 0;
-}
-#endif
+struct i2c_pxa_platform_data i2c_pdata = {
+ .fast_mode = 1,
+};
/*
* Mio global
static void mioa701_poweroff(void)
{
mioa701_machine_exit();
- gpio_set_value(GPIO18_POWEROFF, 1);
+ arm_machine_restart('s');
}
static void mioa701_restart(char c)
{
mioa701_machine_exit();
- arm_machine_restart(c);
+ arm_machine_restart('s');
}
struct gpio_ress global_gpios[] = {
- MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+ MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
};
set_pxa_fb_info(&mioa701_pxafb_info);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
+ wm97xx_bat_set_pdata(&mioa701_battery_data);
udc_init();
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
- mioa701_battery_init();
+
+ pxa_set_i2c_info(&i2c_pdata);
+ pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
}
static void mioa701_machine_exit(void)
1:
mov r0, #0xa0000000 @ Don't suppose memory access works
orr r0, r0, #0x00200000 @ even if it's supposed to
+ orr r0, r0, #0x0000b000
mov r1, #0
str r1, [r0] @ Early disable resume for next boot
ldr r0, mioa701_jumpaddr @ (Murphy's Law)
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO31_AC97_SYNC,
/* IrDA */
+ GPIO40_GPIO, /* ir disable */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
GPIO16_PWM0_OUT,
/* USB */
- GPIO13_GPIO,
+ GPIO13_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
+ GPIO94_GPIO, /* wifi power 1 */
+ GPIO108_GPIO, /* wifi power 2 */
+ GPIO116_GPIO, /* wifi ready */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* MISC. */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
};
/******************************************************************************
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
- err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+ palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
- return err;
+ goto err2;
}
err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
if (err)
- goto pwr_err;
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+ if (err)
+ goto err4;
err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
if (err)
- goto ro_err;
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+ if (err)
+ goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
-ro_err:
+err5:
+ gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
return err;
}
{
gpio_free(GPIO_NR_PALMTX_SD_READONLY);
gpio_free(GPIO_NR_PALMTX_SD_POWER);
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
}
static void palmtx_mci_power(struct device *dev, unsigned int vdd)
KEY(3, 0, KEY_RIGHT),
KEY(3, 2, KEY_LEFT),
-
};
static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
if (ret)
goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+ if (ret)
+ goto err2;
ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+ if (ret)
+ goto err3;
return 0;
+err3:
+ gpio_free(GPIO_NR_PALMTX_LCD_POWER);
err2:
gpio_free(GPIO_NR_PALMTX_BL_POWER);
err:
/******************************************************************************
* IrDA
******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
}
static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+ .startup = palmtx_irda_startup,
+ .shutdown = palmtx_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmtx_irda_transceiver_mode,
};
/******************************************************************************
* UDC
******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
- gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
- udelay(50);
- gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .udc_command = palmtx_udc_command,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup_inverted = 0,
};
/******************************************************************************
ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
- goto err_cs_ac;
-
- ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
if (ret)
- goto err_cs_usb;
+ goto err2;
return 0;
-err_cs_usb:
+err2:
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
return ret;
}
return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
}
-static int palmtx_is_usb_online(void)
-{
- return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
static void power_supply_exit(struct device *dev)
{
- gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
}
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = palmtx_is_ac_online,
- .is_usb_online = palmtx_is_usb_online,
.exit = power_supply_exit,
.supplied_to = palmtx_supplicants,
.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ }
+}
+
+
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
+ palmtx_udc_init();
pxa_set_udc_info(&palmtx_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
GPIO89_USBH1_PEN,
/* PWM0 */
GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
};
/*
.gpio = NR_BUILTIN_GPIO + 1,
}, {
.bus_id = 0, /* Must match with the camera ID above */
+ .gpio = -ENXIO,
}
};
#include <linux/fb.h>
#include <linux/pm.h>
#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00120000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
static struct platform_device *devices[] __initdata = {
&poodle_locomo_device,
&poodle_scoop_device,
+ &sharpsl_rom_device,
};
static void poodle_poweroff(void)
#include "devices.h"
#include "clock.h"
-int cpu_is_pxa26x(void)
-{
- return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
-}
-EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
-
/*
* Various clock factors driven by the CCCR register.
*/
pxa_init_gpio(85, pxa25x_set_wake);
}
+#ifdef CONFIG_CPU_PXA26x
+void __init pxa26x_init_irq(void)
+{
+ pxa_init_irq(32, pxa25x_set_wake);
+ pxa_init_gpio(90, pxa25x_set_wake);
+}
+#endif
+
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
&pxa_device_i2s,
- &pxa_device_rtc,
+ &sa1100_device_rtc,
&pxa25x_device_ssp,
&pxa25x_device_nssp,
&pxa25x_device_assp,
}
/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
- if (cpu_is_pxa255() || cpu_is_pxa26x()) {
+ if (cpu_is_pxa255()) {
clks_register(&pxa25x_hwuart_clkreg, 1);
ret = platform_device_register(&pxa_device_hwuart);
}
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
- pxa_init_gpio(128, pxa27x_set_wake);
+ pxa_init_gpio(121, pxa27x_set_wake);
}
/*
* device registration specific to PXA27x.
*/
-
-static struct resource i2c_power_resources[] = {
- {
- .start = 0x40f00180,
- .end = 0x40f001a3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa27x_device_i2c_power = {
- .name = "pxa2xx-i2c",
- .id = 1,
- .resource = i2c_power_resources,
- .num_resources = ARRAY_SIZE(i2c_power_resources),
-};
-
void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
local_irq_disable();
PCFR |= PCFR_PI2CEN;
local_irq_enable();
- pxa27x_device_i2c_power.dev.platform_data = info;
+ pxa_register_device(&pxa27x_device_i2c_power, info);
}
static struct platform_device *devices[] __initdata = {
&pxa_device_btuart,
&pxa_device_stuart,
&pxa_device_i2s,
+ &sa1100_device_rtc,
&pxa_device_rtc,
- &pxa27x_device_i2c_power,
&pxa27x_device_ssp1,
&pxa27x_device_ssp2,
&pxa27x_device_ssp3,
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/ssp.h>
+#include <mach/i2c.h>
#include "generic.h"
#include "devices.h"
* device registration specific to PXA3xx.
*/
-static struct resource i2c_power_resources[] = {
- {
- .start = 0x40f500c0,
- .end = 0x40f500d3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
- .name = "pxa2xx-i2c",
- .id = 1,
- .resource = i2c_power_resources,
- .num_resources = ARRAY_SIZE(i2c_power_resources),
-};
-
void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
- pxa3xx_device_i2c_power.dev.platform_data = info;
+ pxa_register_device(&pxa3xx_device_i2c_power, info);
}
static struct platform_device *devices[] __initdata = {
&pxa_device_btuart,
&pxa_device_stuart,
&pxa_device_i2s,
+ &sa1100_device_rtc,
&pxa_device_rtc,
&pxa27x_device_ssp1,
&pxa27x_device_ssp2,
&pxa3xx_device_ssp4,
&pxa27x_device_pwm0,
&pxa27x_device_pwm1,
- &pxa3xx_device_i2c_power,
};
static struct sys_device pxa3xx_sysdev[] = {
#include <linux/io.h>
#include <linux/sysdev.h>
+#include <mach/hardware.h>
+
#define SMEMC_PHYS_BASE (0x4A000000)
#define SMEMC_PHYS_SIZE (0x90)
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/backlight.h>
#include <linux/io.h>
GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
};
};
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00140000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
&spitzkbd_device,
&spitzled_device,
+ &sharpsl_rom_device,
};
static void spitz_poweroff(void)
#include <asm/div64.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <linux/mfd/tmio.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
gpio_free(TOSA_GPIO_CARD_VCC_ON);
}
+#ifdef CONFIG_MFD_TC6393XB
+static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
+ {
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 0x002cdf00,/* PLL divisor */
+ .left_margin = 0x004c,
+ .right_margin = 0x005b,
+ .upper_margin = 0x0001,
+ .lower_margin = 0x000d,
+ .hsync_len = 0x0002,
+ .vsync_len = 0x0001,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },{
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 0x00e7f203,/* PLL divisor */
+ .left_margin = 0x0024,
+ .right_margin = 0x002f,
+ .upper_margin = 0x0001,
+ .lower_margin = 0x000d,
+ .hsync_len = 0x0002,
+ .vsync_len = 0x0001,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }
+};
+
+static struct tmio_fb_data tosa_tc6393xb_fb_config = {
+ .lcd_set_power = tc6393xb_lcd_set_power,
+ .lcd_mode = tc6393xb_lcd_mode,
+ .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
+ .modes = &tosa_tc6393xb_lcd_mode[0],
+ .height = 82,
+ .width = 60,
+};
+#endif
+
static struct tc6393xb_platform_data tosa_tc6393xb_data = {
.scr_pll2cr = 0x0cc1,
.scr_gper = 0x3300,
.resume = tosa_tc6393xb_resume,
.nand_data = &tosa_tc6393xb_nand_config,
+#ifdef CONFIG_MFD_TC6393XB
+ .fb_data = &tosa_tc6393xb_fb_config,
+#endif
.resume_restore = 1,
};
},
};
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00160000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
&tosa_gpio_keys_device,
&tosaled_device,
&tosa_bt_device,
+ &sharpsl_rom_device,
};
static void tosa_poweroff(void)
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/audio.h>
-#include <mach/gpio.h>
#include <mach/pxafb.h>
#include <mach/zylonite.h>
#include <mach/mmc.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/gpio.h>
-#include <mach/gpio.h>
#include <mach/mfp-pxa320.h>
#include <mach/zylonite.h>
help
Include support for the ARM(R) RealView Emulation Baseboard platform.
+config REALVIEW_EB_A9MP
+ bool "Support Multicore Cortex-A9"
+ depends on MACH_REALVIEW_EB
+ select CPU_V7
+ help
+ Enable support for the Cortex-A9MPCore tile on the Realview platform.
+
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore tile"
depends on MACH_REALVIEW_EB
+ select CPU_V6
help
Enable support for the ARM11MPCore tile on the Realview platform.
config MACH_REALVIEW_PB11MP
bool "Support RealView/PB11MPCore platform"
+ select CPU_V6
select ARM_GIC
help
Include support for the ARM(R) RealView MPCore Platform Baseboard.
config MACH_REALVIEW_PB1176
bool "Support RealView/PB1176 platform"
+ select CPU_V6
select ARM_GIC
help
Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
+config MACH_REALVIEW_PBA8
+ bool "Support RealView/PB-A8 platform"
+ select CPU_V7
+ select ARM_GIC
+ help
+ Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
+ PB-A8 is a platform with an on-board Cortex-A8 and has support for
+ PCI-E and Compact Flash.
+
+config REALVIEW_HIGH_PHYS_OFFSET
+ bool "High physical base address for the RealView platform"
+ depends on !MACH_REALVIEW_PB1176
+ default y
+ help
+ RealView boards other than PB1176 have the RAM available at
+ 0x70000000, 256MB of which being mirrored at 0x00000000. If
+ the board supports 512MB of RAM, this option allows the
+ memory to be accessed contiguously at the high physical
+ offset.
+
endmenu
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o
obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o
+obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y)
+ zreladdr-y := 0x70008000
+params_phys-y := 0x70000100
+initrd_phys-y := 0x70800000
+else
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-
+endif
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
+#include <linux/smc911x.h>
#include <asm/clkdev.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
+#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
-/* used by entry-macro.S */
+/* used by entry-macro.S and platsmp.c */
void __iomem *gic_cpu_base_addr;
/*
return platform_device_register(&realview_flash_device);
}
+static struct smc911x_platdata realview_smc911x_platdata = {
+ .flags = SMC911X_USE_32BIT,
+ .irq_flags = IRQF_SHARED,
+ .irq_polarity = 1,
+};
+
+static struct platform_device realview_eth_device = {
+ .name = "smc911x",
+ .id = 0,
+ .num_resources = 2,
+};
+
+int realview_eth_register(const char *name, struct resource *res)
+{
+ if (name)
+ realview_eth_device.name = name;
+ realview_eth_device.resource = res;
+ if (strcmp(realview_eth_device.name, "smc911x") == 0)
+ realview_eth_device.dev.platform_data = &realview_smc911x_platdata;
+
+ return platform_device_register(&realview_eth_device);
+}
+
static struct resource realview_i2c_resource = {
.start = REALVIEW_I2C_BASE,
.end = REALVIEW_I2C_BASE + SZ_4K - 1,
static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
- void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
+ void __iomem *sys_osc;
u32 val;
+ if (machine_is_realview_pb1176())
+ sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
+ else
+ sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
+
val = readl(sys_osc) & ~0x7ffff;
val |= vco.v | (vco.r << 9) | (vco.s << 16);
.width = -1,
.height = -1,
.tim2 = TIM2_BCD | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+ .bpp = 16,
+};
+
+static struct clcd_panel xvga = {
+ .mode = {
+ .name = "XVGA",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15748,
+ .left_margin = 152,
+ .right_margin = 48,
+ .upper_margin = 23,
+ .lower_margin = 3,
+ .hsync_len = 104,
+ .vsync_len = 4,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD | TIM2_IPC,
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
.bpp = 16,
};
.width = -1,
.height = -1,
.tim2 = TIM2_BCD,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
.bpp = 16,
};
.width = -1,
.height = -1,
.tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
.bpp = 16,
};
.width = -1,
.height = -1,
.tim2 = TIM2_BCD | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
.bpp = 16,
};
static struct clcd_panel *realview_clcd_panel(void)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
- struct clcd_panel *panel = &vga;
+ struct clcd_panel *vga_panel;
+ struct clcd_panel *panel;
u32 val;
+ if (machine_is_realview_eb())
+ vga_panel = &vga;
+ else
+ vga_panel = &xvga;
+
val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
if (val == SYS_CLCD_ID_SANYO_3_8)
panel = &sanyo_3_8_in;
else if (val == SYS_CLCD_ID_EPSON_2_2)
panel = &epson_2_2_in;
else if (val == SYS_CLCD_ID_VGA)
- panel = &vga;
+ panel = vga_panel;
else {
printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
val);
- panel = &vga;
+ panel = vga_panel;
}
return panel;
writel(val, sys_clcd);
}
-static unsigned long framesize = SZ_1M;
-
static int realview_clcd_setup(struct clcd_fb *fb)
{
+ unsigned long framesize;
dma_addr_t dma;
+ if (machine_is_realview_eb())
+ /* VGA, 16bpp */
+ framesize = 640 * 480 * 2;
+ else
+ /* XVGA, 16bpp */
+ framesize = 1024 * 768 * 2;
+
fb->panel = realview_clcd_panel();
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
* The dummy clock device has to be registered before the main device
* so that the latter will broadcast the clock events
*/
- local_timer_setup(smp_processor_id());
+ local_timer_setup();
#endif
/*
extern struct clcd_board clcd_plat_data;
extern void __iomem *gic_cpu_base_addr;
#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base_addr;
-extern unsigned int twd_size;
+extern void __iomem *twd_base;
#endif
extern void __iomem *timer0_va_base;
extern void __iomem *timer1_va_base;
extern void realview_leds_event(led_event_t ledevt);
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
+extern int realview_eth_register(const char *name, struct resource *res);
#endif
#include <linux/smp.h>
#include <linux/completion.h>
+#include <asm/cacheflush.h>
+
extern volatile int pen_release;
static DECLARE_COMPLETION(cpu_killed);
{
unsigned int v;
- asm volatile( "mcr p15, 0, %1, c7, c14, 0\n"
+ flush_cache_all();
+ asm volatile(
" mcr p15, 0, %1, c7, c5, 0\n"
" mcr p15, 0, %1, c7, c10, 4\n"
/*
#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */
#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE 0x10100700
-#define REALVIEW_EB11MP_TWD_SIZE 0x00000100
+#define REALVIEW_EB11MP_TWD_BASE 0x10100600
#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */
#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */
#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */
#else
#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */
#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE 0x1F000700
-#define REALVIEW_EB11MP_TWD_SIZE 0x00000100
+#define REALVIEW_EB11MP_TWD_BASE 0x1F000600
#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */
#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */
#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
#define NR_IRQS NR_IRQS_EB
#endif
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
#undef MAX_GIC_NR
#define MAX_GIC_NR NR_GIC_EB11MP
#define REALVIEW_EB_PROC_ARM9 0x02000000
#define REALVIEW_EB_PROC_ARM11 0x04000000
#define REALVIEW_EB_PROC_ARM11MP 0x06000000
+#define REALVIEW_EB_PROC_A9MP 0x0C000000
#define check_eb_proc(proc_type) \
((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \
#define core_tile_eb11mp() 0
#endif
+#ifdef CONFIG_REALVIEW_EB_A9MP
+#define core_tile_a9mp() check_eb_proc(REALVIEW_EB_PROC_A9MP)
+#else
+#define core_tile_a9mp() 0
+#endif
+
+#define machine_is_realview_eb_mp() \
+ (machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
+
#endif /* __ASM_ARCH_BOARD_EB_H */
*/
#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */
#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE 0x1F000700
-#define REALVIEW_TC11MP_TWD_SIZE 0x00000100
+#define REALVIEW_TC11MP_TWD_BASE 0x1F000600
#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
--- /dev/null
+/*
+ * include/asm-arm/arch-realview/board-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBA8_H
+#define __ASM_ARCH_BOARD_PBA8_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */
+#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */
+#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */
+#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */
+#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
+#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
+#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */
+#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
+#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
+#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */
+#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */
+#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
+#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
+#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */
+#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */
+#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
+#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */
+#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */
+#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */
+#define REALVIEW_PBA8_CF_BASE 0x18000000 /* Compact flash */
+#define REALVIEW_PBA8_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */
+#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
+#define REALVIEW_PBA8_FLASH0_BASE 0x40000000
+#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M
+#define REALVIEW_PBA8_FLASH1_BASE 0x44000000
+#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M
+#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */
+#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */
+#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
+#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */
+#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
+#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
+
+#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74
+
+/*
+ * PBA8 PCI regions
+ */
+#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */
+#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
+#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
+
+#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */
+#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */
+#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */
+
+/*
+ * Irqs
+ */
+#define IRQ_PBA8_GIC_START 32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
+#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
+#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
+#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
+#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
+#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
+#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
+#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
+#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
+#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC -1
+#define IRQ_PBA8_SCTL -1
+
+#define NR_GIC_PBA8 1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PBA8
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif /* __ASM_ARCH_BOARD_PBA8_H */
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
-*/
+ */
+
+#if defined(CONFIG_MACH_REALVIEW_EB) || \
+ defined(CONFIG_MACH_REALVIEW_PB11MP) || \
+ defined(CONFIG_MACH_REALVIEW_PBA8)
+#ifndef DEBUG_LL_UART_OFFSET
+#define DEBUG_LL_UART_OFFSET 0x00009000
+#elif DEBUG_LL_UART_OFFSET != 0x00009000
+#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
+#endif
+#endif
+
+#ifdef CONFIG_MACH_REALVIEW_PB1176
+#ifndef DEBUG_LL_UART_OFFSET
+#define DEBUG_LL_UART_OFFSET 0x0010c000
+#elif DEBUG_LL_UART_OFFSET != 0x0010c000
+#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
+#endif
+#endif
+
+#ifndef DEBUG_LL_UART_OFFSET
+#error "Unknown RealView platform"
+#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
- movne \rx, #0xf0000000 @ virtual base
- orr \rx, \rx, #0x00009000
+ movne \rx, #0xfb000000 @ virtual base
+ orr \rx, \rx, #DEBUG_LL_UART_OFFSET
.endm
#include <asm/hardware/debug-pl01x.S>
+++ /dev/null
-/*
- * arch/arm/mach-realview/include/mach/dma.h
- *
- * Copyright (C) 2003 ARM Limited.
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
#include <asm/sizes.h>
/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000)
+/*
+ * Statically mapped addresses:
+ *
+ * 10xx xxxx -> fbxx xxxx
+ * 1exx xxxx -> fdxx xxxx
+ * 1fxx xxxx -> fexx xxxx
+ */
+#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000)
#define __io_address(n) __io(IO_ADDRESS(n))
#endif
#define IO_SPACE_LIMIT 0xffffffff
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
#include <mach/board-pb1176.h>
+#include <mach/board-pba8.h>
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
/*
* Physical DRAM offset.
*/
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#define PHYS_OFFSET UL(0x70000000)
+#else
#define PHYS_OFFSET UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
+#endif
#endif
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
#include <mach/board-pb1176.h>
+#include <mach/board-pba8.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
return REALVIEW_PB11MP_UART0_BASE;
else if (machine_is_realview_pb1176())
return REALVIEW_PB1176_UART0_BASE;
+ else if (machine_is_realview_pba8())
+ return REALVIEW_PBA8_UART0_BASE;
else
return 0;
}
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END 0xf8000000
#ifdef CONFIG_LOCAL_TIMERS
-#define TWD_BASE(cpu) (twd_base_addr + (cpu) * twd_size)
-
/* set up by the platform code */
-void __iomem *twd_base_addr;
-unsigned int twd_size;
+void __iomem *twd_base;
static unsigned long mpcore_timer_rate;
static void local_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
- void __iomem *base = TWD_BASE(smp_processor_id());
unsigned long ctrl;
switch(mode) {
ctrl = 0;
}
- __raw_writel(ctrl, base + TWD_TIMER_CONTROL);
+ __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
}
static int local_timer_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
- void __iomem *base = TWD_BASE(smp_processor_id());
- unsigned long ctrl = __raw_readl(base + TWD_TIMER_CONTROL);
+ unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
- __raw_writel(evt, base + TWD_TIMER_COUNTER);
- __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, base + TWD_TIMER_CONTROL);
+ __raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+ __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
return 0;
}
*/
int local_timer_ack(void)
{
- void __iomem *base = TWD_BASE(smp_processor_id());
-
- if (__raw_readl(base + TWD_TIMER_INTSTAT)) {
- __raw_writel(1, base + TWD_TIMER_INTSTAT);
+ if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+ __raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
return 1;
}
return 0;
}
-static void __cpuinit twd_calibrate_rate(unsigned int cpu)
+static void __cpuinit twd_calibrate_rate(void)
{
- void __iomem *base = TWD_BASE(cpu);
unsigned long load, count;
u64 waitjiffies;
waitjiffies += 5;
/* enable, no interrupt or reload */
- __raw_writel(0x1, base + TWD_TIMER_CONTROL);
+ __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
/* maximum value */
- __raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER);
+ __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
while (get_jiffies_64() < waitjiffies)
udelay(10);
- count = __raw_readl(base + TWD_TIMER_COUNTER);
+ count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
load = mpcore_timer_rate / HZ;
- __raw_writel(load, base + TWD_TIMER_LOAD);
+ __raw_writel(load, twd_base + TWD_TIMER_LOAD);
}
/*
* Setup the local clock events for a CPU.
*/
-void __cpuinit local_timer_setup(unsigned int cpu)
+void __cpuinit local_timer_setup(void)
{
+ unsigned int cpu = smp_processor_id();
struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
unsigned long flags;
- twd_calibrate_rate(cpu);
+ twd_calibrate_rate();
clk->name = "local_timer";
clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
/*
* take a local timer down
*/
-void __cpuexit local_timer_stop(unsigned int cpu)
+void __cpuexit local_timer_stop(void)
{
- __raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL);
+ __raw_writel(0, twd_base + TWD_TIMER_CONTROL);
}
#else /* CONFIG_LOCAL_TIMERS */
{
}
-void __cpuinit local_timer_setup(unsigned int cpu)
+void __cpuinit local_timer_setup(void)
{
+ unsigned int cpu = smp_processor_id();
struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
clk->name = "dummy_timer";
#include <mach/board-pb11mp.h>
#include <mach/scu.h>
+#include "core.h"
+
extern void realview_secondary_startup(void);
/*
*/
volatile int __cpuinitdata pen_release = -1;
+static void __iomem *scu_base_addr(void)
+{
+ if (machine_is_realview_eb_mp())
+ return __io_address(REALVIEW_EB11MP_SCU_BASE);
+ else if (machine_is_realview_pb11mp())
+ return __io_address(REALVIEW_TC11MP_SCU_BASE);
+ else
+ return (void __iomem *)0;
+}
+
static unsigned int __init get_core_count(void)
{
unsigned int ncores;
- void __iomem *scu_base = 0;
-
- if (machine_is_realview_eb() && core_tile_eb11mp())
- scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE);
- else if (machine_is_realview_pb11mp())
- scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE);
+ void __iomem *scu_base = scu_base_addr();
if (scu_base) {
ncores = __raw_readl(scu_base + SCU_CONFIG);
static void scu_enable(void)
{
u32 scu_ctrl;
- void __iomem *scu_base;
-
- if (machine_is_realview_eb() && core_tile_eb11mp())
- scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE);
- else if (machine_is_realview_pb11mp())
- scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE);
- else
- BUG();
+ void __iomem *scu_base = scu_base_addr();
scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
scu_ctrl |= 1;
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- if (machine_is_realview_eb() && core_tile_eb11mp())
- gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
- else if (machine_is_realview_pb11mp())
- gic_cpu_init(0, __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
+ gic_cpu_init(0, gic_cpu_base_addr);
/*
* let the primary processor know we're out of the
* dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
* realview_timer_init
*/
- if ((machine_is_realview_eb() && core_tile_eb11mp()) ||
- machine_is_realview_pb11mp())
- local_timer_setup(cpu);
+ local_timer_setup();
#endif
/*
static void __init realview_eb_map_io(void)
{
iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
- if (core_tile_eb11mp())
+ if (core_tile_eb11mp() || core_tile_a9mp())
iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
}
},
};
-static struct platform_device realview_eb_eth_device = {
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_eb_eth_resources),
- .resource = realview_eb_eth_resources,
-};
-
/*
* Detect and register the correct Ethernet device. RealView/EB rev D
* platforms use the newer SMSC LAN9118 Ethernet chip
static int eth_device_register(void)
{
void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
+ const char *name = NULL;
u32 idrev;
if (!eth_addr)
return -ENOMEM;
idrev = readl(eth_addr + 0x50);
- if ((idrev & 0xFFFF0000) == 0x01180000)
- /* SMSC LAN9118 chip present */
- realview_eb_eth_device.name = "smc911x";
- else
- /* SMSC 91C111 chip present */
- realview_eb_eth_device.name = "smc91x";
+ if ((idrev & 0xFFFF0000) != 0x01180000)
+ /* SMSC LAN9118 not present, use LAN91C111 instead */
+ name = "smc91x";
iounmap(eth_addr);
- return platform_device_register(&realview_eb_eth_device);
+ return realview_eth_register(name, realview_eb_eth_resources);
}
static void __init gic_init_irq(void)
{
- if (core_tile_eb11mp()) {
+ if (core_tile_eb11mp() || core_tile_a9mp()) {
unsigned int pldctrl;
/* new irq mode */
timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
- if (core_tile_eb11mp()) {
+ if (core_tile_eb11mp() || core_tile_a9mp()) {
#ifdef CONFIG_LOCAL_TIMERS
- twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE);
- twd_size = REALVIEW_EB11MP_TWD_SIZE;
+ twd_base = __io_address(REALVIEW_EB11MP_TWD_BASE);
#endif
timer_irq = IRQ_EB11MP_TIMER0_1;
} else
{
int i;
- if (core_tile_eb11mp()) {
+ if (core_tile_eb11mp() || core_tile_a9mp()) {
realview_eb11mp_fixup();
#ifdef CONFIG_CACHE_L2X0
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_io = REALVIEW_EB_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = PHYS_OFFSET + 0x00000100,
.map_io = realview_eb_map_io,
.init_irq = gic_init_irq,
.timer = &realview_eb_timer,
},
};
-static struct platform_device realview_pb1176_smsc911x_device = {
- .name = "smc911x",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_pb1176_smsc911x_resources),
- .resource = realview_pb1176_smsc911x_resources,
-};
-
static void __init gic_init_irq(void)
{
/* ARM1176 DevChip GIC, primary */
#endif
realview_flash_register(&realview_pb1176_flash_resource, 1);
- platform_device_register(&realview_pb1176_smsc911x_device);
+ realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_io = REALVIEW_PB1176_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = PHYS_OFFSET + 0x00000100,
.map_io = realview_pb1176_map_io,
.init_irq = gic_init_irq,
.timer = &realview_pb1176_timer,
},
};
-static struct platform_device realview_pb11mp_smsc911x_device = {
- .name = "smc911x",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_pb11mp_smsc911x_resources),
- .resource = realview_pb11mp_smsc911x_resources,
-};
-
struct resource realview_pb11mp_cf_resources[] = {
[0] = {
.start = REALVIEW_PB11MP_CF_BASE,
timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
#ifdef CONFIG_LOCAL_TIMERS
- twd_base_addr = __io_address(REALVIEW_TC11MP_TWD_BASE);
- twd_size = REALVIEW_TC11MP_TWD_SIZE;
+ twd_base = __io_address(REALVIEW_TC11MP_TWD_BASE);
#endif
realview_timer_init(IRQ_TC11MP_TIMER0_1);
}
realview_flash_register(realview_pb11mp_flash_resource,
ARRAY_SIZE(realview_pb11mp_flash_resource));
- platform_device_register(&realview_pb11mp_smsc911x_device);
+ realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
platform_device_register(&realview_i2c_device);
platform_device_register(&realview_pb11mp_cf_device);
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_io = REALVIEW_PB11MP_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
+ .boot_params = PHYS_OFFSET + 0x00000100,
.map_io = realview_pb11mp_map_io,
.init_irq = gic_init_irq,
.timer = &realview_pb11mp_timer,
--- /dev/null
+/*
+ * linux/arch/arm/mach-realview/realview_pba8.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/icst307.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pba8.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+#include "clock.h"
+
+static struct map_desc realview_pba8_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#ifdef CONFIG_PCI
+ {
+ .virtual = PCIX_UNIT_BASE,
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_PCI_BASE),
+ .length = REALVIEW_PBA8_PCI_BASE_SIZE,
+ .type = MT_DEVICE
+ },
+#endif
+#ifdef CONFIG_DEBUG_LL
+ {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+};
+
+static void __init realview_pba8_map_io(void)
+{
+ iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
+}
+
+/*
+ * RealView PBA8Core AMBA devices
+ */
+
+#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ }
+#define GPIO2_DMA { 0, 0 }
+#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ }
+#define GPIO3_DMA { 0, 0 }
+#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ }
+#define AACI_DMA { 0x80, 0x81 }
+#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
+#define MMCI0_DMA { 0x84, 0 }
+#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ }
+#define KMI0_DMA { 0, 0 }
+#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ }
+#define KMI1_DMA { 0, 0 }
+#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ }
+#define PBA8_SMC_DMA { 0, 0 }
+#define MPMC_IRQ { NO_IRQ, NO_IRQ }
+#define MPMC_DMA { 0, 0 }
+#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ }
+#define PBA8_CLCD_DMA { 0, 0 }
+#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ }
+#define DMAC_DMA { 0, 0 }
+#define SCTL_IRQ { NO_IRQ, NO_IRQ }
+#define SCTL_DMA { 0, 0 }
+#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ }
+#define PBA8_WATCHDOG_DMA { 0, 0 }
+#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ }
+#define PBA8_GPIO0_DMA { 0, 0 }
+#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ }
+#define GPIO1_DMA { 0, 0 }
+#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ }
+#define PBA8_RTC_DMA { 0, 0 }
+#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ }
+#define SCI_DMA { 7, 6 }
+#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ }
+#define PBA8_UART0_DMA { 15, 14 }
+#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ }
+#define PBA8_UART1_DMA { 13, 12 }
+#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ }
+#define PBA8_UART2_DMA { 11, 10 }
+#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ }
+#define PBA8_UART3_DMA { 0x86, 0x87 }
+#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ }
+#define PBA8_SSP_DMA { 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, NULL);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:f2", PBA8_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:f3", PBA8_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:f4", PBA8_SSP, NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd, "issp:20", PBA8_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+ &dmac_device,
+ &uart0_device,
+ &uart1_device,
+ &uart2_device,
+ &uart3_device,
+ &smc_device,
+ &clcd_device,
+ &sctl_device,
+ &wdog_device,
+ &gpio0_device,
+ &gpio1_device,
+ &gpio2_device,
+ &rtc_device,
+ &sci0_device,
+ &ssp0_device,
+ &aaci_device,
+ &mmc0_device,
+ &kmi0_device,
+ &kmi1_device,
+};
+
+/*
+ * RealView PB-A8 platform devices
+ */
+static struct resource realview_pba8_flash_resource[] = {
+ [0] = {
+ .start = REALVIEW_PBA8_FLASH0_BASE,
+ .end = REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_PBA8_FLASH1_BASE,
+ .end = REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource realview_pba8_smsc911x_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBA8_ETH_BASE,
+ .end = REALVIEW_PBA8_ETH_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PBA8_ETH,
+ .end = IRQ_PBA8_ETH,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct resource realview_pba8_cf_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBA8_CF_BASE,
+ .end = REALVIEW_PBA8_CF_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_PBA8_CF_MEM_BASE,
+ .end = REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = -1, /* FIXME: Find correct irq */
+ .end = -1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device realview_pba8_cf_device = {
+ .name = "compactflash",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(realview_pba8_cf_resources),
+ .resource = realview_pba8_cf_resources,
+};
+
+static void __init gic_init_irq(void)
+{
+ /* ARM PB-A8 on-board GIC */
+ gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START);
+ gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
+}
+
+static void __init realview_pba8_timer_init(void)
+{
+ timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE);
+ timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20;
+ timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
+ timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
+
+ realview_timer_init(IRQ_PBA8_TIMER0_1);
+}
+
+static struct sys_timer realview_pba8_timer = {
+ .init = realview_pba8_timer_init,
+};
+
+static void __init realview_pba8_init(void)
+{
+ int i;
+
+ realview_flash_register(realview_pba8_flash_resource,
+ ARRAY_SIZE(realview_pba8_flash_resource));
+ realview_eth_register(NULL, realview_pba8_smsc911x_resources);
+ platform_device_register(&realview_i2c_device);
+ platform_device_register(&realview_pba8_cf_device);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+
+#ifdef CONFIG_LEDS
+ leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
+ /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+ .phys_io = REALVIEW_PBA8_UART0_BASE,
+ .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = realview_pba8_map_io,
+ .init_irq = gic_init_irq,
+ .timer = &realview_pba8_timer,
+ .init_machine = realview_pba8_init,
+MACHINE_END
#define IO_SPACE_LIMIT 0xffffffff
-/*
- * GCC is totally crap at loading/storing data. We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o) \
- ({ \
- unsigned int __v, __r = (b); \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2]" \
- : "=r" (__v) \
- : "r" (__r), "Ir" (o)); \
- __v; \
- })
-
-#define __arch_base_getl(b,o) \
- ({ \
- unsigned int __v, __r = (b); \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2]" \
- : "=r" (__v) \
- : "r" (__r), "Ir" (o)); \
- __v; \
- })
-
-#define __arch_base_putb(v,b,o) \
- ({ \
- unsigned int __r = (b); \
- __asm__ __volatile__( \
- "strb %0, [%1, %2]" \
- : \
- : "r" (v), "r" (__r), "Ir" (o));\
- })
-
-#define __arch_base_putl(v,b,o) \
- ({ \
- unsigned int __r = (b); \
- __asm__ __volatile__( \
- "str %0, [%1, %2]" \
- : \
- : "r" (v), "r" (__r), "Ir" (o));\
- })
-
/*
* We use two different types of addressing - PC style addresses, and ARM
* addresses. PC style accesses the PC hardware with the normal PC IO
result; \
})
-#define __ioaddrc(port) __ioaddr(port)
-
#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
+
/* the following macro is deprecated */
#define ioaddr(port) ((unsigned long)__ioaddr((port)))
#define IRQ_TIMER IRQ_TIMER0
+#define NR_IRQS 128
/*
- * arch/arm/mach-rpc/include/mach/dma.h
+ * arch/arm/mach-rpc/include/mach/isa-dma.h
*
* Copyright (C) 1997 Russell King
*
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS 0xd0000000
#define MAX_DMA_CHANNELS 8
#define DMA_0 0
*/
#define PHYS_OFFSET UL(0x10000000)
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* Cache flushing area - ROM
*/
#define PHYS_OFFSET UL(0x0C000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
config CPU_S3C2410
bool
depends on ARCH_S3C2410
+ select CPU_ARM920T
select S3C2410_CLOCK
select S3C2410_GPIO
select CPU_LLSERIAL_S3C2410
#include <linux/sysdev.h>
#include <linux/serial_core.h>
-#include <asm/dma.h>
#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
[DMACH_XD0] = {
#include <linux/sysdev.h>
#include <mach/hardware.h>
-/*
- * This is the maximum DMA address(physical address) that can be DMAd to.
- *
- */
-#define MAX_DMA_ADDRESS 0x40000000
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
/* We use `virtual` dma channels to hide the fact we have only a limited
* request a dma channel exclusivley
*/
-extern int s3c2410_dma_request(dmach_t channel,
+extern int s3c2410_dma_request(unsigned int channel,
struct s3c2410_dma_client *, void *dev);
* change the state of the dma channel
*/
-extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
/* s3c2410_dma_setflags
*
* set the channel's flags to a given state
*/
-extern int s3c2410_dma_setflags(dmach_t channel,
+extern int s3c2410_dma_setflags(unsigned int channel,
unsigned int flags);
/* s3c2410_dma_free
* free the dma channel (will also abort any outstanding operations)
*/
-extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
/* s3c2410_dma_enqueue
*
* drained before the buffer is given to the DMA system.
*/
-extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size);
/* s3c2410_dma_config
* configure the dma channel
*/
-extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
/* s3c2410_dma_devconfig
*
* get the position that the dma transfer is currently at
*/
-extern int s3c2410_dma_getposition(dmach_t channel,
+extern int s3c2410_dma_getposition(unsigned int channel,
dma_addr_t *src, dma_addr_t *dest);
-extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
/* DMA Register definitions */
#define PHYS_OFFSET UL(0x30000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
unsigned long pin_mosi;
unsigned long pin_miso;
+ int num_chipselect;
int bus_num;
void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
#include <mach/hardware.h>
#include <linux/io.h>
-#include <asm/plat-s3c/regs-watchdog.h>
+#include <plat/regs-watchdog.h>
#include <mach/regs-clock.h>
#include <linux/clk.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
#include <mach/fb.h>
#include <linux/mtd/mtd.h>
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/iic.h>
#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/s3c2410.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
#include <mach/leds-gpio.h>
#include <plat/regs-serial.h>
#include <mach/fb.h>
-#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/nand.h>
+#include <plat/udc.h>
#include <mach/spi.h>
#include <mach/spi-gpio.h>
config CPU_S3C2412
bool
depends on ARCH_S3C2410
+ select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
#include <linux/serial_core.h>
#include <linux/io.h>
-#include <asm/dma.h>
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
#include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
#include <asm/mach/irq.h>
#include <plat/regs-serial.h>
-#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
static struct map_desc jive_iodesc[] __initdata = {
};
#include <mach/regs-lcd.h>
#include <mach/idle.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
#include <mach/fb.h>
#include <plat/s3c2410.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
#include <mach/regs-s3c2412.h>
#include <plat/s3c2412.h>
config CPU_S3C2440
bool
depends on ARCH_S3C2410
+ select CPU_ARM920T
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2410_GPIO
#include <linux/sysdev.h>
#include <linux/serial_core.h>
-#include <asm/dma.h>
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
[DMACH_XD0] = {
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
#include <mach/fb.h>
#include <plat/clock.h>
config CPU_S3C2442
bool
depends on ARCH_S3C2410
+ select CPU_ARM920T
select S3C2410_CLOCK
select S3C2410_GPIO
select S3C2410_PM if PM
#include <linux/serial_core.h>
#include <linux/io.h>
-#include <asm/dma.h>
#include <mach/dma.h>
#include <plat/dma.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
#define MAP(x) { \
[0] = (x) | DMA_CH_VALID, \
};
static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
-{
- .dev = &colliescoop_device.dev,
- .irq = COLLIE_IRQ_GPIO_CF_IRQ,
- .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
- .cd_irq_str = "PCMCIA0 CD",
-},
+ {
+ .dev = &colliescoop_device.dev,
+ .irq = COLLIE_IRQ_GPIO_CF_IRQ,
+ .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+ },
};
static struct scoop_pcmcia_config collie_pcmcia_config = {
- .devs = &collie_pcmcia_scoop[0],
- .num_devs = 1,
+ .devs = &collie_pcmcia_scoop[0],
+ .num_devs = 1,
};
-
static struct mcp_plat_data collie_mcp_data = {
- .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
- .sclk_rate = 9216000,
+ .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
+ .sclk_rate = 9216000,
};
#ifdef CONFIG_SHARP_LOCOMO
static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
{
- if (mctrl & TIOCM_RTS)
+ if (mctrl & TIOCM_RTS)
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
- else
+ else
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
- if (mctrl & TIOCM_DTR)
+ if (mctrl & TIOCM_DTR)
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
- else
+ else
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
}
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/hardware/scoop.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/collie.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/sharpsl_pm.h>
}
static struct ucb1x00_driver collie_pm_ucb_driver = {
- .add = collie_pm_ucb_add,
+ .add = collie_pm_ucb_add,
};
static struct platform_device *collie_pm_device;
static int __init collie_pm_init(void)
{
- int ret;
+ int ret;
- collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
- if (!collie_pm_device)
- return -ENOMEM;
+ collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
+ if (!collie_pm_device)
+ return -ENOMEM;
- collie_pm_device->dev.platform_data = &collie_pm_machinfo;
- ret = platform_device_add(collie_pm_device);
+ collie_pm_device->dev.platform_data = &collie_pm_machinfo;
+ ret = platform_device_add(collie_pm_device);
- if (ret)
- platform_device_put(collie_pm_device);
+ if (ret)
+ platform_device_put(collie_pm_device);
if (!ret)
ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
static void __exit collie_pm_exit(void)
{
ucb1x00_unregister_driver(&collie_pm_ucb_driver);
- platform_device_unregister(collie_pm_device);
+ platform_device_unregister(collie_pm_device);
}
module_init(collie_pm_init);
*
* Copyright (C) 2000 2001, The Delft University of Technology
*
- * Authors:
+ * Authors:
* - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
* - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
* - major rewrite for linux-2.3.99
- * - rewritten for the more generic power management scheme in
+ * - rewritten for the more generic power management scheme in
* linux-2.4.5-rmk1
*
* This software has been developed while working on the LART
* computing board (http://www.lartmaker.nl/), which is
* sponsored by the Mobile Multi-media Communications
- * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications
+ * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications
* (http://www.ubicom.tudelft.nl/) projects.
*
* The authors can be reached at:
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Theory of operations
* ====================
- *
+ *
* Clock scaling can be used to lower the power consumption of the CPU
* core. This will give you a somewhat longer running time.
*
* MDCNFG 0xA0000000 DRAM config
* MDCAS0 0xA0000004 Access waveform
* MDCAS1 0xA0000008 Access waveform
- * MDCAS2 0xA000000C Access waveform
+ * MDCAS2 0xA000000C Access waveform
*
* Care must be taken to change the DRAM parameters the correct way,
* because otherwise the DRAM becomes unusable and the kernel will
- * crash.
+ * crash.
*
* The simple solution to avoid a kernel crash is to put the actual
* clock change in ROM and jump to that code from the kernel. The main
* as long as all re-configuration steps yield a valid DRAM
* configuration. The advantages are clear: it will run on all SA-1100
* platforms, and the code is very simple.
- *
+ *
* If you really want to understand what is going on in
* sa1100_update_dram_timings(), you'll have to read sections 8.2,
* 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor
typedef struct {
int speed;
u32 mdcnfg;
- u32 mdcas0;
+ u32 mdcas0;
u32 mdcas1;
u32 mdcas2;
} sa1100_dram_regs_t;
/* No risk, no fun: run with interrupts on! */
if (new_speed > current_speed) {
/* We're going FASTER, so first relax the memory
- * timings before changing the core frequency
+ * timings before changing the core frequency
*/
/* Half the memory access clock */
.twr = 9,
.refresh = 64000,
.cas_latency = 3,
- }, { /* Samsung K4S281632B-1H */
- .name = "K4S281632B-1H",
- .rows = 12,
- .tck = 10,
- .trp = 20,
- .twr = 10,
- .refresh = 64000,
- .cas_latency = 3,
+ }, { /* Samsung K4S281632B-1H */
+ .name = "K4S281632B-1H",
+ .rows = 12,
+ .tck = 10,
+ .trp = 20,
+ .twr = 10,
+ .refresh = 64000,
+ .cas_latency = 3,
}, { /* Samsung KM416S4030CT */
.name = "KM416S4030CT",
.rows = 13,
}
/*
- * Ok, set the CPU frequency.
+ * Ok, set the CPU frequency.
*/
static int sa1110_target(struct cpufreq_policy *policy,
unsigned int target_freq,
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#undef DEBUG
}
}
if (!err) {
- if (dma)
- dma->device = device;
- else
- err = -ENOSR;
+ if (dma)
+ dma->device = device;
+ else
+ err = -ENOSR;
}
spin_unlock(&dma_list_lock);
if (err)
#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
+#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT 0xf0000000
-#define H3600_BANK_2_VIRT 0xf1000000
-#define H3600_BANK_4_VIRT 0xf3800000
+#define H3600_EGPIO_VIRT 0xf0000000
+#define H3600_BANK_2_VIRT 0xf1000000
+#define H3600_BANK_4_VIRT 0xf3800000
/*
Machine-independent GPIO definitions
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
sa1111_adjust_zones(node, size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_1M)
#endif
#endif
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* Because of the wide memory address space between physical RAM banks on the
* SA1100, it's much convenient to use Linux's SparseMEM support to implement
#ifndef __ARCH_SA1100_MTD_XIP_H__
#define __ARCH_SA1100_MTD_XIP_H__
+#include <mach/hardware.h>
+
#define xip_irqpending() (ICIP & ICMR)
/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
sa1100_map_io();
sa1100_register_uart(0, 3);
- sa1100_register_uart(1, 1);
+ sa1100_register_uart(1, 1);
- GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
- GPDR |= GPIO_UART_TXD;
- GPDR &= ~GPIO_UART_RXD;
- PPAR |= PPAR_UPR;
+ GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
+ GPDR |= GPIO_UART_TXD;
+ GPDR &= ~GPIO_UART_RXD;
+ PPAR |= PPAR_UPR;
/*
* Fix expansion memory timing for network card
.offset = MTDPART_OFS_APPEND,
.size = 0xe0000
},
- {
+ {
.name = "initrd",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
ldr r1, =MSC1
ldr r2, =MSC2
- ldr r3, [r0]
- bic r3, r3, #FMsk(MSC_RT)
- bic r3, r3, #FMsk(MSC_RT)<<16
+ ldr r3, [r0]
+ bic r3, r3, #FMsk(MSC_RT)
+ bic r3, r3, #FMsk(MSC_RT)<<16
- ldr r4, [r1]
- bic r4, r4, #FMsk(MSC_RT)
- bic r4, r4, #FMsk(MSC_RT)<<16
+ ldr r4, [r1]
+ bic r4, r4, #FMsk(MSC_RT)
+ bic r4, r4, #FMsk(MSC_RT)<<16
- ldr r5, [r2]
- bic r5, r5, #FMsk(MSC_RT)
- bic r5, r5, #FMsk(MSC_RT)<<16
+ ldr r5, [r2]
+ bic r5, r5, #FMsk(MSC_RT)
+ bic r5, r5, #FMsk(MSC_RT)<<16
- ldr r6, =MDREFR
+ ldr r6, =MDREFR
- ldr r7, [r6]
- bic r7, r7, #0x0000FF00
- bic r7, r7, #0x000000F0
- orr r8, r7, #MDREFR_SLFRSH
+ ldr r7, [r6]
+bic r7, r7, #0x0000FF00
+bic r7, r7, #0x000000F0
+orr r8, r7, #MDREFR_SLFRSH
- ldr r9, =MDCNFG
- ldr r10, [r9]
- bic r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
- bic r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
+ ldr r9, =MDCNFG
+ ldr r10, [r9]
+ bic r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
+ bic r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
- bic r11, r8, #MDREFR_SLFRSH
- bic r11, r11, #MDREFR_E1PIN
+ bic r11, r8, #MDREFR_SLFRSH
+ bic r11, r11, #MDREFR_E1PIN
- ldr r12, =PMCR
+ ldr r12, =PMCR
- mov r13, #PMCR_SF
+ mov r13, #PMCR_SF
b sa1110_sdram_controller_fix
mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
- mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
+ mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
- mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r4, c3, c0, 0 @ domain ID
+ mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
mcr p15, 0, r6, c13, c0, 0 @ PID
b resume_turn_on_mmu @ cache align execution
.text
resume_after_mmu:
- mcr p15, 0, r1, c15, c1, 2 @ enable clock switching
+ mcr p15, 0, r1, c15, c1, 2 @ enable clock switching
ldmfd sp!, {r4 - r12, pc} @ return to caller
* linux/arch/arm/mach-sa1100/time.c
*
* Copyright (C) 1998 Deborah Wallach.
- * Twiddles (C) 1999 Hugo Fiennes <hugo@empeg.com>
- *
+ * Twiddles (C) 1999 Hugo Fiennes <hugo@empeg.com>
+ *
* 2000/03/29 (C) Nicolas Pitre <nico@cam.org>
* Rewritten: big cleanup, much simpler, better HZ accuracy.
*
#include <asm/leds.h>
#include <asm/param.h>
+#include <mach/hardware.h>
+
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#define ROMCARD_SIZE 0x08000000
#define ROMCARD_START 0x10000000
-#define PCIO_BASE 0xe0000000
-
/* defines for the Framebuffer */
#define FB_START 0x06000000
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
+#define PCIO_BASE 0xe0000000
+#define IO_SPACE_LIMIT 0xffffffff
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
- * and are translated to the start of IO.
- */
-#define __PORT_PCIO(x) (!((x) & 0x80000000))
-
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-
-
-static inline unsigned int __ioaddr (unsigned int port) \
-{ \
- if (__PORT_PCIO(port)) \
- return (unsigned int)(PCIO_BASE + (port)); \
- else \
- return (unsigned int)(IO_BASE + (port)); \
-}
-
-#define __mem_pci(addr) (addr)
-
-/*
- * Translated address IO functions
- *
- * IO address has already been translated to a virtual address
- */
-#define outb_t(v,p) \
- (*(volatile unsigned char *)(p) = (v))
-
-#define inb_t(p) \
- (*(volatile unsigned char *)(p))
-
-#define outl_t(v,p) \
- (*(volatile unsigned long *)(p) = (v))
-
-#define inl_t(p) \
- (*(volatile unsigned long *)(p))
+#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(addr) (addr)
#endif
/*
- * arch/arm/mach-shark/include/mach/dma.h
+ * arch/arm/mach-shark/include/mach/isa-dma.h
*
* by Alexander Schulz
*/
* The rest is not DMAable. See dev / .properties
* in OpenFirmware.
*/
-#define MAX_DMA_ADDRESS 0xC0400000
#define MAX_DMA_CHANNELS 8
#define DMA_ISA_CASCADE 4
__arch_adjust_zones(node, size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_4M)
#endif
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* Cache flushing area
*/
config ARCH_VERSATILE_PB
bool "Support Versatile/PB platform"
+ select CPU_ARM926T
default y
help
Include support for the ARM(R) Versatile/PB platform.
config MACH_VERSATILE_AB
bool "Support Versatile/AB platform"
+ select CPU_ARM926T
help
Include support for the ARM(R) Versatile/AP platform.
+++ /dev/null
-/*
- * arch/arm/mach-versatile/include/mach/dma.h
- *
- * Copyright (C) 2003 ARM Limited.
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
#define IO_SPACE_LIMIT 0xffffffff
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
#define IRQ_VICSOURCE31 (IRQ_VIC_START + INT_VICSOURCE31)
#define IRQ_VIC_END (IRQ_VIC_START + 31)
-#define IRQMASK_WDOGINT INTMASK_WDOGINT
-#define IRQMASK_SOFTINT INTMASK_SOFTINT
-#define IRQMASK_COMMRx INTMASK_COMMRx
-#define IRQMASK_COMMTx INTMASK_COMMTx
-#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1
-#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3
-#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0
-#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1
-#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2
-#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3
-#define IRQMASK_RTCINT INTMASK_RTCINT
-#define IRQMASK_SSPINT INTMASK_SSPINT
-#define IRQMASK_UARTINT0 INTMASK_UARTINT0
-#define IRQMASK_UARTINT1 INTMASK_UARTINT1
-#define IRQMASK_UARTINT2 INTMASK_UARTINT2
-#define IRQMASK_SCIINT INTMASK_SCIINT
-#define IRQMASK_CLCDINT INTMASK_CLCDINT
-#define IRQMASK_DMAINT INTMASK_DMAINT
-#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT
-#define IRQMASK_MBXINT INTMASK_MBXINT
-#define IRQMASK_GNDINT INTMASK_GNDINT
-#define IRQMASK_VICSOURCE21 INTMASK_VICSOURCE21
-#define IRQMASK_VICSOURCE22 INTMASK_VICSOURCE22
-#define IRQMASK_VICSOURCE23 INTMASK_VICSOURCE23
-#define IRQMASK_VICSOURCE24 INTMASK_VICSOURCE24
-#define IRQMASK_VICSOURCE25 INTMASK_VICSOURCE25
-#define IRQMASK_VICSOURCE26 INTMASK_VICSOURCE26
-#define IRQMASK_VICSOURCE27 INTMASK_VICSOURCE27
-#define IRQMASK_VICSOURCE28 INTMASK_VICSOURCE28
-#define IRQMASK_VICSOURCE29 INTMASK_VICSOURCE29
-#define IRQMASK_VICSOURCE30 INTMASK_VICSOURCE30
-#define IRQMASK_VICSOURCE31 INTMASK_VICSOURCE31
-
/*
* FIQ interrupts definitions are the same as the INT definitions.
*/
#define FIQ_VICSOURCE31 INT_VICSOURCE31
-#define FIQMASK_WDOGINT INTMASK_WDOGINT
-#define FIQMASK_SOFTINT INTMASK_SOFTINT
-#define FIQMASK_COMMRx INTMASK_COMMRx
-#define FIQMASK_COMMTx INTMASK_COMMTx
-#define FIQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1
-#define FIQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3
-#define FIQMASK_GPIOINT0 INTMASK_GPIOINT0
-#define FIQMASK_GPIOINT1 INTMASK_GPIOINT1
-#define FIQMASK_GPIOINT2 INTMASK_GPIOINT2
-#define FIQMASK_GPIOINT3 INTMASK_GPIOINT3
-#define FIQMASK_RTCINT INTMASK_RTCINT
-#define FIQMASK_SSPINT INTMASK_SSPINT
-#define FIQMASK_UARTINT0 INTMASK_UARTINT0
-#define FIQMASK_UARTINT1 INTMASK_UARTINT1
-#define FIQMASK_UARTINT2 INTMASK_UARTINT2
-#define FIQMASK_SCIINT INTMASK_SCIINT
-#define FIQMASK_CLCDINT INTMASK_CLCDINT
-#define FIQMASK_DMAINT INTMASK_DMAINT
-#define FIQMASK_PWRFAILINT INTMASK_PWRFAILINT
-#define FIQMASK_MBXINT INTMASK_MBXINT
-#define FIQMASK_GNDINT INTMASK_GNDINT
-#define FIQMASK_VICSOURCE21 INTMASK_VICSOURCE21
-#define FIQMASK_VICSOURCE22 INTMASK_VICSOURCE22
-#define FIQMASK_VICSOURCE23 INTMASK_VICSOURCE23
-#define FIQMASK_VICSOURCE24 INTMASK_VICSOURCE24
-#define FIQMASK_VICSOURCE25 INTMASK_VICSOURCE25
-#define FIQMASK_VICSOURCE26 INTMASK_VICSOURCE26
-#define FIQMASK_VICSOURCE27 INTMASK_VICSOURCE27
-#define FIQMASK_VICSOURCE28 INTMASK_VICSOURCE28
-#define FIQMASK_VICSOURCE29 INTMASK_VICSOURCE29
-#define FIQMASK_VICSOURCE30 INTMASK_VICSOURCE30
-#define FIQMASK_VICSOURCE31 INTMASK_VICSOURCE31
-
/*
* Secondary interrupt controller
*/
#define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3)
#define IRQ_SIC_END 63
-#define SIC_IRQMASK_MMCI0B SIC_INTMASK_MMCI0B
-#define SIC_IRQMASK_MMCI1B SIC_INTMASK_MMCI1B
-#define SIC_IRQMASK_KMI0 SIC_INTMASK_KMI0
-#define SIC_IRQMASK_KMI1 SIC_INTMASK_KMI1
-#define SIC_IRQMASK_SCI3 SIC_INTMASK_SCI3
-#define SIC_IRQMASK_UART3 SIC_INTMASK_UART3
-#define SIC_IRQMASK_CLCD SIC_INTMASK_CLCD
-#define SIC_IRQMASK_TOUCH SIC_INTMASK_TOUCH
-#define SIC_IRQMASK_KEYPAD SIC_INTMASK_KEYPAD
-#define SIC_IRQMASK_DoC SIC_INTMASK_DoC
-#define SIC_IRQMASK_MMCI0A SIC_INTMASK_MMCI0A
-#define SIC_IRQMASK_MMCI1A SIC_INTMASK_MMCI1A
-#define SIC_IRQMASK_AACI SIC_INTMASK_AACI
-#define SIC_IRQMASK_ETH SIC_INTMASK_ETH
-#define SIC_IRQMASK_USB SIC_INTMASK_USB
-#define SIC_IRQMASK_PCI0 SIC_INTMASK_PCI0
-#define SIC_IRQMASK_PCI1 SIC_INTMASK_PCI1
-#define SIC_IRQMASK_PCI2 SIC_INTMASK_PCI2
-#define SIC_IRQMASK_PCI3 SIC_INTMASK_PCI3
-
#define NR_IRQS 64
*/
#define PHYS_OFFSET UL(0x00000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
-
#endif
#define INT_VICSOURCE30 30 /* PCI 3 */
#define INT_VICSOURCE31 31 /* SIC source */
-/*
- * Interrupt bit positions
- *
- */
-#define INTMASK_WDOGINT (1 << INT_WDOGINT)
-#define INTMASK_SOFTINT (1 << INT_SOFTINT)
-#define INTMASK_COMMRx (1 << INT_COMMRx)
-#define INTMASK_COMMTx (1 << INT_COMMTx)
-#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1)
-#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3)
-#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0)
-#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1)
-#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2)
-#define INTMASK_GPIOINT3 (1 << INT_GPIOINT3)
-#define INTMASK_RTCINT (1 << INT_RTCINT)
-#define INTMASK_SSPINT (1 << INT_SSPINT)
-#define INTMASK_UARTINT0 (1 << INT_UARTINT0)
-#define INTMASK_UARTINT1 (1 << INT_UARTINT1)
-#define INTMASK_UARTINT2 (1 << INT_UARTINT2)
-#define INTMASK_SCIINT (1 << INT_SCIINT)
-#define INTMASK_CLCDINT (1 << INT_CLCDINT)
-#define INTMASK_DMAINT (1 << INT_DMAINT)
-#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT)
-#define INTMASK_MBXINT (1 << INT_MBXINT)
-#define INTMASK_GNDINT (1 << INT_GNDINT)
-#define INTMASK_VICSOURCE21 (1 << INT_VICSOURCE21)
-#define INTMASK_VICSOURCE22 (1 << INT_VICSOURCE22)
-#define INTMASK_VICSOURCE23 (1 << INT_VICSOURCE23)
-#define INTMASK_VICSOURCE24 (1 << INT_VICSOURCE24)
-#define INTMASK_VICSOURCE25 (1 << INT_VICSOURCE25)
-#define INTMASK_VICSOURCE26 (1 << INT_VICSOURCE26)
-#define INTMASK_VICSOURCE27 (1 << INT_VICSOURCE27)
-#define INTMASK_VICSOURCE28 (1 << INT_VICSOURCE28)
-#define INTMASK_VICSOURCE29 (1 << INT_VICSOURCE29)
-#define INTMASK_VICSOURCE30 (1 << INT_VICSOURCE30)
-#define INTMASK_VICSOURCE31 (1 << INT_VICSOURCE31)
-
-
#define VERSATILE_SC_VALID_INT 0x003FFFFF
#define MAXIRQNUM 31
#define SIC_INT_PCI3 30
-#define SIC_INTMASK_MMCI0B (1 << SIC_INT_MMCI0B)
-#define SIC_INTMASK_MMCI1B (1 << SIC_INT_MMCI1B)
-#define SIC_INTMASK_KMI0 (1 << SIC_INT_KMI0)
-#define SIC_INTMASK_KMI1 (1 << SIC_INT_KMI1)
-#define SIC_INTMASK_SCI3 (1 << SIC_INT_SCI3)
-#define SIC_INTMASK_UART3 (1 << SIC_INT_UART3)
-#define SIC_INTMASK_CLCD (1 << SIC_INT_CLCD)
-#define SIC_INTMASK_TOUCH (1 << SIC_INT_TOUCH)
-#define SIC_INTMASK_KEYPAD (1 << SIC_INT_KEYPAD)
-#define SIC_INTMASK_DoC (1 << SIC_INT_DoC)
-#define SIC_INTMASK_MMCI0A (1 << SIC_INT_MMCI0A)
-#define SIC_INTMASK_MMCI1A (1 << SIC_INT_MMCI1A)
-#define SIC_INTMASK_AACI (1 << SIC_INT_AACI)
-#define SIC_INTMASK_ETH (1 << SIC_INT_ETH)
-#define SIC_INTMASK_USB (1 << SIC_INT_USB)
-#define SIC_INTMASK_PCI0 (1 << SIC_INT_PCI0)
-#define SIC_INTMASK_PCI1 (1 << SIC_INT_PCI1)
-#define SIC_INTMASK_PCI2 (1 << SIC_INT_PCI2)
-#define SIC_INTMASK_PCI3 (1 << SIC_INT_PCI3)
-
/*
* Clean base - dummy
*
--- /dev/null
+if ARCH_W90X900
+
+config CPU_W90P910
+ bool
+ help
+ Support for W90P910 of Nuvoton W90X900 CPUs.
+
+menu "W90P910 Machines"
+
+config MACH_W90P910EVB
+ bool "Nuvoton W90P910 Evaluation Board"
+ default y
+ select CPU_W90P910
+ help
+ Say Y here if you are using the Nuvoton W90P910EVB
+
+endmenu
+
+endif
--- /dev/null
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := irq.o time.o
+
+# W90X900 CPU support files
+
+obj-$(CONFIG_CPU_W90P910) += w90p910.o
+
+# machine support
+
+obj-$(CONFIG_MACH_W90P910EVB) += mach-w90p910evb.o
--- /dev/null
+zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/cpu.h
+ *
+ * Based on linux/include/asm-arm/plat-s3c24xx/cpu.h by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Header file for W90X900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define IODESC_ENT(y) \
+{ \
+ .virtual = (unsigned long)W90X900_VA_##y, \
+ .pfn = __phys_to_pfn(W90X900_PA_##y), \
+ .length = W90X900_SZ_##y, \
+ .type = MT_DEVICE, \
+}
+
+/*Cpu identifier register*/
+
+#define W90X900PDID W90X900_VA_GCR
+#define W90P910_CPUID 0x02900910
+#define W90P920_CPUID 0x02900920
+#define W90P950_CPUID 0x02900950
+#define W90N960_CPUID 0x02900960
+
+struct w90x900_uartcfg;
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void w90x900_init_irq(void);
+extern void w90p910_init_io(struct map_desc *mach_desc, int size);
+extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
+extern void w90p910_init_clocks(int xtal);
+extern void w90p910_map_io(struct map_desc *mach_desc, int size);
+extern struct sys_timer w90x900_timer;
+
+#define W90X900_RES(name) \
+struct resource w90x900_##name##_resource[] = { \
+ [0] = { \
+ .start = name##_PA, \
+ .end = name##_PA + 0x0ff, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ [1] = { \
+ .start = IRQ_##name, \
+ .end = IRQ_##name, \
+ .flags = IORESOURCE_IRQ, \
+ } \
+}
+
+#define W90X900_DEVICE(devname, regname, devid, platdevname) \
+struct platform_device w90x900_##devname = { \
+ .name = platdevname, \
+ .id = devid, \
+ .num_resources = ARRAY_SIZE(w90x900_##regname##_resource), \
+ .resource = w90x900_##regname##_resource, \
+}
+
+#define W90X900_UARTCFG(port, flag, uc, ulc, ufc) \
+{ \
+ .hwport = port, \
+ .flags = flag, \
+ .ucon = uc, \
+ .ulcon = ulc, \
+ .ufcon = ufc, \
+}
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for W90P910-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #AIC_BA
+
+ ldr \irqnr, [ \base, #AIC_IPER]
+ ldr \irqnr, [ \base, #AIC_ISNR]
+ cmp \irqnr, #0
+
+ .endm
+
+ /* currently don't need an disable_fiq macro */
+
+ .macro disable_fiq
+ .endm
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/hardware.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/io.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+
+#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/irqs.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/irqs.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ */
+
+#define W90X900_IRQ(x) (x)
+
+/* Main cpu interrupts */
+
+#define IRQ_WDT W90X900_IRQ(1)
+#define IRQ_UART0 W90X900_IRQ(7)
+#define IRQ_UART1 W90X900_IRQ(8)
+#define IRQ_UART2 W90X900_IRQ(9)
+#define IRQ_UART3 W90X900_IRQ(10)
+#define IRQ_UART4 W90X900_IRQ(11)
+#define IRQ_TIMER0 W90X900_IRQ(12)
+#define IRQ_TIMER1 W90X900_IRQ(13)
+#define IRQ_T_INT_GROUP W90X900_IRQ(14)
+#define IRQ_ADC W90X900_IRQ(31)
+#define NR_IRQS (IRQ_ADC+1)
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/map.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#ifndef __ASSEMBLY__
+#define W90X900_ADDR(x) ((void __iomem *)(0xF0000000 + (x)))
+#else
+#define W90X900_ADDR(x) (0xF0000000 + (x))
+#endif
+
+#define AHB_IO_BASE 0xB0000000
+#define APB_IO_BASE 0xB8000000
+#define CLOCKPW_BASE (APB_IO_BASE+0x200)
+#define AIC_IO_BASE (APB_IO_BASE+0x2000)
+#define TIMER_IO_BASE (APB_IO_BASE+0x1000)
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+
+#define W90X900_VA_IRQ W90X900_ADDR(0x00000000)
+#define W90X900_PA_IRQ (0xB8002000)
+#define W90X900_SZ_IRQ SZ_4K
+
+#define W90X900_VA_GCR W90X900_ADDR(0x08002000)
+#define W90X900_PA_GCR (0xB0000000)
+#define W90X900_SZ_GCR SZ_4K
+
+/* Clock and Power management */
+
+#define W90X900_VA_CLKPWR (W90X900_VA_GCR+0x200)
+#define W90X900_PA_CLKPWR (0xB0000200)
+#define W90X900_SZ_CLKPWR SZ_4K
+
+/* EBI management */
+
+#define W90X900_VA_EBI W90X900_ADDR(0x00001000)
+#define W90X900_PA_EBI (0xB0001000)
+#define W90X900_SZ_EBI SZ_4K
+
+/* UARTs */
+
+#define W90X900_VA_UART W90X900_ADDR(0x08000000)
+#define W90X900_PA_UART (0xB8000000)
+#define W90X900_SZ_UART SZ_4K
+
+/* Timers */
+
+#define W90X900_VA_TIMER W90X900_ADDR(0x08001000)
+#define W90X900_PA_TIMER (0xB8001000)
+#define W90X900_SZ_TIMER SZ_4K
+
+/* GPIO ports */
+
+#define W90X900_VA_GPIO W90X900_ADDR(0x08003000)
+#define W90X900_PA_GPIO (0xB8003000)
+#define W90X900_SZ_GPIO SZ_4K
+
+#endif /* __ASM_ARCH_MAP_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/memory.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-irq.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* Advance Interrupt Controller (AIC) Registers */
+
+#define AIC_BA W90X900_VA_IRQ
+
+#define REG_AIC_IRQSC (AIC_BA+0x80)
+#define REG_AIC_GEN (AIC_BA+0x84)
+#define REG_AIC_GASR (AIC_BA+0x88)
+#define REG_AIC_GSCR (AIC_BA+0x8C)
+#define REG_AIC_IRSR (AIC_BA+0x100)
+#define REG_AIC_IASR (AIC_BA+0x104)
+#define REG_AIC_ISR (AIC_BA+0x108)
+#define REG_AIC_IPER (AIC_BA+0x10C)
+#define REG_AIC_ISNR (AIC_BA+0x110)
+#define REG_AIC_IMR (AIC_BA+0x114)
+#define REG_AIC_OISR (AIC_BA+0x118)
+#define REG_AIC_MECR (AIC_BA+0x120)
+#define REG_AIC_MDCR (AIC_BA+0x124)
+#define REG_AIC_SSCR (AIC_BA+0x128)
+#define REG_AIC_SCCR (AIC_BA+0x12C)
+#define REG_AIC_EOSCR (AIC_BA+0x130)
+#define AIC_IPER (0x10C)
+#define AIC_ISNR (0x110)
+
+/*16-18 bits of REG_AIC_GEN define irq(2-4) group*/
+
+#define TIMER2_IRQ (1 << 16)
+#define TIMER3_IRQ (1 << 17)
+#define TIMER4_IRQ (1 << 18)
+#define TIME_GROUP_IRQ (TIMER2_IRQ|TIMER3_IRQ|TIMER4_IRQ)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define UART0_BA W90X900_VA_UART
+#define UART1_BA (W90X900_VA_UART+0x100)
+#define UART2_BA (W90X900_VA_UART+0x200)
+#define UART3_BA (W90X900_VA_UART+0x300)
+#define UART4_BA (W90X900_VA_UART+0x400)
+
+#define UART0_PA W90X900_PA_UART
+#define UART1_PA (W90X900_PA_UART+0x100)
+#define UART2_PA (W90X900_PA_UART+0x200)
+#define UART3_PA (W90X900_PA_UART+0x300)
+#define UART4_PA (W90X900_PA_UART+0x400)
+
+#ifndef __ASSEMBLY__
+
+struct w90x900_uart_clksrc {
+ const char *name;
+ unsigned int divisor;
+ unsigned int min_baud;
+ unsigned int max_baud;
+};
+
+struct w90x900_uartcfg {
+ unsigned char hwport;
+ unsigned char unused;
+ unsigned short flags;
+ unsigned long uart_flags;
+
+ unsigned long ucon;
+ unsigned long ulcon;
+ unsigned long ufcon;
+
+ struct w90x900_uart_clksrc *clocks;
+ unsigned int clocks_size;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-timer.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+/* Timer Registers */
+
+#define TMR_BA W90X900_VA_TIMER
+#define REG_TCSR0 (TMR_BA+0x00)
+#define REG_TCSR1 (TMR_BA+0x04)
+#define REG_TICR0 (TMR_BA+0x08)
+#define REG_TICR1 (TMR_BA+0x0C)
+#define REG_TDR0 (TMR_BA+0x10)
+#define REG_TDR1 (TMR_BA+0x14)
+#define REG_TISR (TMR_BA+0x18)
+#define REG_WTCR (TMR_BA+0x1C)
+#define REG_TCSR2 (TMR_BA+0x20)
+#define REG_TCSR3 (TMR_BA+0x24)
+#define REG_TICR2 (TMR_BA+0x28)
+#define REG_TICR3 (TMR_BA+0x2C)
+#define REG_TDR2 (TMR_BA+0x30)
+#define REG_TDR3 (TMR_BA+0x34)
+#define REG_TCSR4 (TMR_BA+0x40)
+#define REG_TICR4 (TMR_BA+0x48)
+#define REG_TDR4 (TMR_BA+0x50)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/system.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <asm/proc-fns.h>
+
+static void arch_idle(void)
+{
+}
+
+static void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE Now, I don't use it. */
+
+#define CLOCK_TICK_RATE 15000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/uncompress.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+/* Defines for UART registers */
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#define arch_decomp_wdog()
+
+static void putc(int ch)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#endif/* __ASM_W90X900_UNCOMPRESS_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/irq.c
+ *
+ * based on linux/arch/arm/plat-s3c24xx/irq.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+static void w90x900_irq_mask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MDCR);
+}
+
+/*
+ * By the w90p910 spec,any irq,only write 1
+ * to REG_AIC_EOSCR for ACK
+ */
+
+static void w90x900_irq_ack(unsigned int irq)
+{
+ __raw_writel(0x01, REG_AIC_EOSCR);
+}
+
+static void w90x900_irq_unmask(unsigned int irq)
+{
+ unsigned long mask;
+
+ if (irq == IRQ_T_INT_GROUP) {
+ mask = __raw_readl(REG_AIC_GEN);
+ __raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
+ __raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
+ }
+ __raw_writel(1 << irq, REG_AIC_MECR);
+}
+
+static struct irq_chip w90x900_irq_chip = {
+ .ack = w90x900_irq_ack,
+ .mask = w90x900_irq_mask,
+ .unmask = w90x900_irq_unmask,
+};
+
+void __init w90x900_init_irq(void)
+{
+ int irqno;
+
+ __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
+
+ for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
+ set_irq_chip(irqno, &w90x900_irq_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+
+#include "cpu.h"
+
+static struct map_desc w90p910_iodesc[] __initdata = {
+};
+
+static struct w90x900_uartcfg w90p910_uartcfgs[] = {
+ W90X900_UARTCFG(0, 0, 0, 0, 0),
+ W90X900_UARTCFG(1, 0, 0, 0, 0),
+ W90X900_UARTCFG(2, 0, 0, 0, 0),
+ W90X900_UARTCFG(3, 0, 0, 0, 0),
+ W90X900_UARTCFG(4, 0, 0, 0, 0),
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *w90p910evb_dev[] __initdata = {
+};
+
+static void __init w90p910evb_map_io(void)
+{
+ w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
+ w90p910_init_clocks(0);
+ w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs));
+}
+
+static void __init w90p910evb_init(void)
+{
+ platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = w90p910evb_map_io,
+ .init_irq = w90x900_init_irq,
+ .init_machine = w90p910evb_init,
+ .timer = &w90x900_timer,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/time.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <mach/system.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+static unsigned long w90x900_gettimeoffset(void)
+{
+ return 0;
+}
+
+/*IRQ handler for the timer*/
+
+static irqreturn_t
+w90x900_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ __raw_writel(0x01, REG_TISR); /* clear TIF0 */
+ return IRQ_HANDLED;
+}
+
+static struct irqaction w90x900_timer_irq = {
+ .name = "w90x900 Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = w90x900_timer_interrupt,
+};
+
+/*Set up timer reg.*/
+
+static void w90x900_timer_setup(void)
+{
+ __raw_writel(0, REG_TCSR0);
+ __raw_writel(0, REG_TCSR1);
+ __raw_writel(0, REG_TCSR2);
+ __raw_writel(0, REG_TCSR3);
+ __raw_writel(0, REG_TCSR4);
+ __raw_writel(0x1F, REG_TISR);
+ __raw_writel(15000000/(100 * 100), REG_TICR0);
+ __raw_writel(0x68000063, REG_TCSR0);
+}
+
+static void __init w90x900_timer_init(void)
+{
+ w90x900_timer_setup();
+ setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+}
+
+struct sys_timer w90x900_timer = {
+ .init = w90x900_timer_init,
+ .offset = w90x900_gettimeoffset,
+ .resume = w90x900_timer_setup
+};
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/w90p910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * W90P910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+
+#include "cpu.h"
+
+/*W90P910 has five uarts*/
+
+#define MAX_UART_COUNT 5
+static int uart_count;
+static struct platform_device *uart_devs[MAX_UART_COUNT-1];
+
+/* Initial IO mappings */
+
+static struct map_desc w90p910_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+ /*IODESC_ENT(LCD),*/
+};
+
+/*Init the dev resource*/
+
+static W90X900_RES(UART0);
+static W90X900_RES(UART1);
+static W90X900_RES(UART2);
+static W90X900_RES(UART3);
+static W90X900_RES(UART4);
+static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart");
+static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart");
+static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart");
+static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart");
+static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart");
+
+static struct platform_device *uart_devices[] __initdata = {
+ &w90x900_uart0,
+ &w90x900_uart1,
+ &w90x900_uart2,
+ &w90x900_uart3,
+ &w90x900_uart4
+};
+
+/*Init W90P910 uart device*/
+
+void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no)
+{
+ struct platform_device *platdev;
+ int uart, uartdev;
+
+ /*By min() to judge count of uart be used indeed*/
+
+ uartdev = ARRAY_SIZE(uart_devices);
+ no = min(uartdev, no);
+
+ for (uart = 0; uart < no; uart++, cfg++) {
+ if (cfg->hwport != uart)
+ printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart);
+ platdev = uart_devices[cfg->hwport];
+ uart_devs[uart] = platdev;
+ platdev->dev.platform_data = cfg;
+ }
+ uart_count = uart;
+}
+
+/*Init W90P910 evb io*/
+
+void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
+
+ idcode = __raw_readl(W90X900PDID);
+ if (idcode != W90P910_CPUID)
+ printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
+}
+
+/*Init W90P910 clock*/
+
+void __init w90p910_init_clocks(int xtal)
+{
+}
+
+static int __init w90p910_init_cpu(void)
+{
+ return 0;
+}
+
+static int __init w90x900_arch_init(void)
+{
+ int ret;
+
+ ret = w90p910_init_cpu();
+ if (ret != 0)
+ return ret;
+
+ return platform_add_devices(uart_devs, uart_count);
+
+}
+arch_initcall(w90x900_arch_init);
# ARM610
config CPU_ARM610
- bool "Support ARM610 processor"
- depends on ARCH_RPC
+ bool "Support ARM610 processor" if ARCH_RPC
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
# ARM710
config CPU_ARM710
- bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC
- default y if ARCH_CLPS7500
+ bool "Support ARM710 processor" if ARCH_RPC
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
# ARM720T
config CPU_ARM720T
- bool "Support ARM720T processor" if !ARCH_CLPS711X && !ARCH_L7200 && !ARCH_CDB89712 && ARCH_INTEGRATOR
- default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X
+ bool "Support ARM720T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_PABRT_NOIFAR
# ARM920T
config CPU_ARM920T
- bool "Support ARM920T processor"
- depends on ARCH_EP93XX || ARCH_INTEGRATOR || CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
- default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200
+ bool "Support ARM920T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
# ARM922T
config CPU_ARM922T
bool "Support ARM922T processor" if ARCH_INTEGRATOR
- depends on ARCH_LH7A40X || ARCH_INTEGRATOR || ARCH_KS8695
- default y if ARCH_LH7A40X || ARCH_KS8695
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
# ARM925T
config CPU_ARM925T
bool "Support ARM925T processor" if ARCH_OMAP1
- depends on ARCH_OMAP15XX
- default y if ARCH_OMAP15XX
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
# ARM926T
config CPU_ARM926T
- bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \
- MACH_VERSATILE_AB || ARCH_OMAP730 || \
- ARCH_OMAP16XX || MACH_REALVIEW_EB || \
- ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
- ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
- ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
- ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
- ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
- ARCH_OMAP730 || ARCH_OMAP16XX || \
- ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
- ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
- ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
- ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
- ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
+ bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_PABRT_NOIFAR
# ARM1020 - needs validating
config CPU_ARM1020
- bool "Support ARM1020T (rev 0) processor"
- depends on ARCH_INTEGRATOR
+ bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
# ARM1020E - needs validating
config CPU_ARM1020E
- bool "Support ARM1020E processor"
- depends on ARCH_INTEGRATOR
+ bool "Support ARM1020E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
# ARM1022E
config CPU_ARM1022
- bool "Support ARM1022E processor"
- depends on ARCH_INTEGRATOR
+ bool "Support ARM1022E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
# ARM1026EJ-S
config CPU_ARM1026
- bool "Support ARM1026EJ-S processor"
- depends on ARCH_INTEGRATOR
+ bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_PABRT_NOIFAR
# SA110
config CPU_SA110
- bool "Support StrongARM(R) SA-110 processor" if !ARCH_EBSA110 && !FOOTBRIDGE && !ARCH_TBOX && !ARCH_SHARK && !ARCH_NEXUSPCI && ARCH_RPC
- default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_TBOX || ARCH_SHARK || ARCH_NEXUSPCI
+ bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
select CPU_ABRT_EV4
# SA1100
config CPU_SA1100
bool
- depends on ARCH_SA1100
- default y
select CPU_32v4
select CPU_ABRT_EV4
select CPU_PABRT_NOIFAR
# XScale
config CPU_XSCALE
bool
- depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000
- default y
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_NOIFAR
# XScale Core Version 3
config CPU_XSC3
bool
- depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx
- default y
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_NOIFAR
# Feroceon
config CPU_FEROCEON
bool
- depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
- default y
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_NOIFAR
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor"
- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
- default y if ARCH_MX3
- default y if ARCH_MSM
+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_NOIFAR
# ARMv7
config CPU_V7
- bool "Support ARM V7 processor"
- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP3
+ bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
- depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
+ depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || REALVIEW_EB_A9MP
default y
select OUTER_CACHE
help
#include <linux/string.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <linux/uaccess.h>
#include <asm/unaligned.h>
*/
#include <linux/linkage.h>
#include <linux/init.h>
-#include <mach/hardware.h>
#include <asm/page.h>
#include "proc-macros.S"
*/
#include <linux/linkage.h>
#include <linux/init.h>
-#include <mach/hardware.h>
#include <asm/page.h>
#include "proc-macros.S"
*/
#include <linux/linkage.h>
#include <linux/init.h>
-#include <mach/hardware.h>
#include <asm/page.h>
#include "proc-macros.S"
* - mm - mm_struct describing address space
*/
ENTRY(v7_flush_dcache_all)
+ dmb @ ensure ordering with previous memory accesses
mrc p15, 1, r0, c0, c0, 1 @ read clidr
ands r3, r0, #0x7000000 @ extract loc from clidr
mov r3, r3, lsr #23 @ left align loc bit field
finished:
mov r10, #0 @ swith back to cache level 0
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ dsb
isb
mov pc, lr
ENDPROC(v7_flush_dcache_all)
+++ /dev/null
-/*
- * linux/arch/arm/lib/copypage-feroceon.S
- *
- * Copyright (C) 2008 Marvell Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This handles copy_user_page and clear_user_page on Feroceon
- * more optimally than the generic implementations.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-
- .text
- .align 5
-
-ENTRY(feroceon_copy_user_page)
- stmfd sp!, {r4-r9, lr}
- mov ip, #PAGE_SZ
-1: mov lr, r1
- ldmia r1!, {r2 - r9}
- pld [lr, #32]
- pld [lr, #64]
- pld [lr, #96]
- pld [lr, #128]
- pld [lr, #160]
- pld [lr, #192]
- pld [lr, #224]
- stmia r0, {r2 - r9}
- ldmia r1!, {r2 - r9}
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- stmia r0, {r2 - r9}
- ldmia r1!, {r2 - r9}
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- stmia r0, {r2 - r9}
- ldmia r1!, {r2 - r9}
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- stmia r0, {r2 - r9}
- ldmia r1!, {r2 - r9}
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- stmia r0, {r2 - r9}
- ldmia r1!, {r2 - r9}
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- stmia r0, {r2 - r9}
- ldmia r1!, {r2 - r9}
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- stmia r0, {r2 - r9}
- ldmia r1!, {r2 - r9}
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- stmia r0, {r2 - r9}
- subs ip, ip, #(32 * 8)
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- bne 1b
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
- ldmfd sp!, {r4-r9, pc}
-
- .align 5
-
-ENTRY(feroceon_clear_user_page)
- stmfd sp!, {r4-r7, lr}
- mov r1, #PAGE_SZ/32
- mov r2, #0
- mov r3, #0
- mov r4, #0
- mov r5, #0
- mov r6, #0
- mov r7, #0
- mov ip, #0
- mov lr, #0
-1: stmia r0, {r2-r7, ip, lr}
- subs r1, r1, #1
- mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line
- add r0, r0, #32
- bne 1b
- mcr p15, 0, r1, c7, c10, 4 @ drain WB
- ldmfd sp!, {r4-r7, pc}
-
- __INITDATA
-
- .type feroceon_user_fns, #object
-ENTRY(feroceon_user_fns)
- .long feroceon_clear_user_page
- .long feroceon_copy_user_page
- .size feroceon_user_fns, . - feroceon_user_fns
--- /dev/null
+/*
+ * linux/arch/arm/mm/copypage-feroceon.S
+ *
+ * Copyright (C) 2008 Marvell Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles copy_user_highpage and clear_user_page on Feroceon
+ * more optimally than the generic implementations.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+static void __attribute__((naked))
+feroceon_copy_user_page(void *kto, const void *kfrom)
+{
+ asm("\
+ stmfd sp!, {r4-r9, lr} \n\
+ mov ip, %0 \n\
+1: mov lr, r1 \n\
+ ldmia r1!, {r2 - r9} \n\
+ pld [lr, #32] \n\
+ pld [lr, #64] \n\
+ pld [lr, #96] \n\
+ pld [lr, #128] \n\
+ pld [lr, #160] \n\
+ pld [lr, #192] \n\
+ pld [lr, #224] \n\
+ stmia r0, {r2 - r9} \n\
+ ldmia r1!, {r2 - r9} \n\
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
+ add r0, r0, #32 \n\
+ stmia r0, {r2 - r9} \n\
+ ldmia r1!, {r2 - r9} \n\
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
+ add r0, r0, #32 \n\
+ stmia r0, {r2 - r9} \n\
+ ldmia r1!, {r2 - r9} \n\
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
+ add r0, r0, #32 \n\
+ stmia r0, {r2 - r9} \n\
+ ldmia r1!, {r2 - r9} \n\
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
+ add r0, r0, #32 \n\
+ stmia r0, {r2 - r9} \n\
+ ldmia r1!, {r2 - r9} \n\
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
+ add r0, r0, #32 \n\
+ stmia r0, {r2 - r9} \n\
+ ldmia r1!, {r2 - r9} \n\
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
+ add r0, r0, #32 \n\
+ stmia r0, {r2 - r9} \n\
+ ldmia r1!, {r2 - r9} \n\
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
+ add r0, r0, #32 \n\
+ stmia r0, {r2 - r9} \n\
+ subs ip, ip, #(32 * 8) \n\
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
+ add r0, r0, #32 \n\
+ bne 1b \n\
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\
+ ldmfd sp!, {r4-r9, pc}"
+ :
+ : "I" (PAGE_SIZE));
+}
+
+void feroceon_copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr)
+{
+ void *kto, *kfrom;
+
+ kto = kmap_atomic(to, KM_USER0);
+ kfrom = kmap_atomic(from, KM_USER1);
+ feroceon_copy_user_page(kto, kfrom);
+ kunmap_atomic(kfrom, KM_USER1);
+ kunmap_atomic(kto, KM_USER0);
+}
+
+void feroceon_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+ void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+ asm volatile ("\
+ mov r1, %2 \n\
+ mov r2, #0 \n\
+ mov r3, #0 \n\
+ mov r4, #0 \n\
+ mov r5, #0 \n\
+ mov r6, #0 \n\
+ mov r7, #0 \n\
+ mov ip, #0 \n\
+ mov lr, #0 \n\
+1: stmia %0, {r2-r7, ip, lr} \n\
+ subs r1, r1, #1 \n\
+ mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
+ add %0, %0, #32 \n\
+ bne 1b \n\
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB"
+ : "=r" (ptr)
+ : "0" (kaddr), "I" (PAGE_SIZE / 32)
+ : "r1", "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr");
+ kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns feroceon_user_fns __initdata = {
+ .cpu_clear_user_highpage = feroceon_clear_user_highpage,
+ .cpu_copy_user_highpage = feroceon_copy_user_highpage,
+};
+
+++ /dev/null
-/*
- * linux/arch/arm/lib/copypage.S
- *
- * Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-
- .text
- .align 5
-/*
- * ARMv3 optimised copy_user_page
- *
- * FIXME: do we need to handle cache stuff...
- */
-ENTRY(v3_copy_user_page)
- stmfd sp!, {r4, lr} @ 2
- mov r2, #PAGE_SZ/64 @ 1
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
-1: stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4
- subs r2, r2, #1 @ 1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmneia r1!, {r3, r4, ip, lr} @ 4
- bne 1b @ 1
- ldmfd sp!, {r4, pc} @ 3
-
- .align 5
-/*
- * ARMv3 optimised clear_user_page
- *
- * FIXME: do we need to handle cache stuff...
- */
-ENTRY(v3_clear_user_page)
- str lr, [sp, #-4]!
- mov r1, #PAGE_SZ/64 @ 1
- mov r2, #0 @ 1
- mov r3, #0 @ 1
- mov ip, #0 @ 1
- mov lr, #0 @ 1
-1: stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- subs r1, r1, #1 @ 1
- bne 1b @ 1
- ldr pc, [sp], #4
-
- __INITDATA
-
- .type v3_user_fns, #object
-ENTRY(v3_user_fns)
- .long v3_clear_user_page
- .long v3_copy_user_page
- .size v3_user_fns, . - v3_user_fns
--- /dev/null
+/*
+ * linux/arch/arm/mm/copypage-v3.c
+ *
+ * Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * ARMv3 optimised copy_user_highpage
+ *
+ * FIXME: do we need to handle cache stuff...
+ */
+static void __attribute__((naked))
+v3_copy_user_page(void *kto, const void *kfrom)
+{
+ asm("\n\
+ stmfd sp!, {r4, lr} @ 2\n\
+ mov r2, %2 @ 1\n\
+ ldmia %0!, {r3, r4, ip, lr} @ 4+1\n\
+1: stmia %1!, {r3, r4, ip, lr} @ 4\n\
+ ldmia %0!, {r3, r4, ip, lr} @ 4+1\n\
+ stmia %1!, {r3, r4, ip, lr} @ 4\n\
+ ldmia %0!, {r3, r4, ip, lr} @ 4+1\n\
+ stmia %1!, {r3, r4, ip, lr} @ 4\n\
+ ldmia %0!, {r3, r4, ip, lr} @ 4\n\
+ subs r2, r2, #1 @ 1\n\
+ stmia %1!, {r3, r4, ip, lr} @ 4\n\
+ ldmneia %0!, {r3, r4, ip, lr} @ 4\n\
+ bne 1b @ 1\n\
+ ldmfd sp!, {r4, pc} @ 3"
+ :
+ : "r" (kfrom), "r" (kto), "I" (PAGE_SIZE / 64));
+}
+
+void v3_copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr)
+{
+ void *kto, *kfrom;
+
+ kto = kmap_atomic(to, KM_USER0);
+ kfrom = kmap_atomic(from, KM_USER1);
+ v3_copy_user_page(kto, kfrom);
+ kunmap_atomic(kfrom, KM_USER1);
+ kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * ARMv3 optimised clear_user_page
+ *
+ * FIXME: do we need to handle cache stuff...
+ */
+void v3_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+ void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+ asm volatile("\n\
+ mov r1, %2 @ 1\n\
+ mov r2, #0 @ 1\n\
+ mov r3, #0 @ 1\n\
+ mov ip, #0 @ 1\n\
+ mov lr, #0 @ 1\n\
+1: stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ subs r1, r1, #1 @ 1\n\
+ bne 1b @ 1"
+ : "=r" (ptr)
+ : "0" (kaddr), "I" (PAGE_SIZE / 64)
+ : "r1", "r2", "r3", "ip", "lr");
+ kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns v3_user_fns __initdata = {
+ .cpu_clear_user_highpage = v3_clear_user_highpage,
+ .cpu_copy_user_highpage = v3_copy_user_highpage,
+};
*/
#include <linux/init.h>
#include <linux/mm.h>
+#include <linux/highmem.h>
-#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
static DEFINE_SPINLOCK(minicache_lock);
/*
- * ARMv4 mini-dcache optimised copy_user_page
+ * ARMv4 mini-dcache optimised copy_user_highpage
*
* We flush the destination cache lines just before we write the data into the
* corresponding address. Since the Dcache is read-allocate, this removes the
*
* Note: We rely on all ARMv4 processors implementing the "invalidate D line"
* instruction. If your processor does not supply this, you have to write your
- * own copy_user_page that does the right thing.
+ * own copy_user_highpage that does the right thing.
*/
static void __attribute__((naked))
mc_copy_user_page(void *from, void *to)
: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
}
-void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+void v4_mc_copy_user_highpage(struct page *from, struct page *to,
+ unsigned long vaddr)
{
- struct page *page = virt_to_page(kfrom);
+ void *kto = kmap_atomic(to, KM_USER1);
- if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
- __flush_dcache_page(page_mapping(page), page);
+ if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+ __flush_dcache_page(page_mapping(from), from);
spin_lock(&minicache_lock);
- set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0);
+ set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(page_to_pfn(from), minicache_pgprot), 0);
flush_tlb_kernel_page(0xffff8000);
mc_copy_user_page((void *)0xffff8000, kto);
spin_unlock(&minicache_lock);
+
+ kunmap_atomic(kto, KM_USER1);
}
/*
* ARMv4 optimised clear_user_page
*/
-void __attribute__((naked))
-v4_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+void v4_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
{
- asm volatile(
- "str lr, [sp, #-4]!\n\
- mov r1, %0 @ 1\n\
+ void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+ asm volatile("\
+ mov r1, %2 @ 1\n\
mov r2, #0 @ 1\n\
mov r3, #0 @ 1\n\
mov ip, #0 @ 1\n\
mov lr, #0 @ 1\n\
-1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
- stmia r0!, {r2, r3, ip, lr} @ 4\n\
- stmia r0!, {r2, r3, ip, lr} @ 4\n\
- mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
- stmia r0!, {r2, r3, ip, lr} @ 4\n\
- stmia r0!, {r2, r3, ip, lr} @ 4\n\
+1: mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
subs r1, r1, #1 @ 1\n\
- bne 1b @ 1\n\
- ldr pc, [sp], #4"
- :
- : "I" (PAGE_SIZE / 64));
+ bne 1b @ 1"
+ : "=r" (ptr)
+ : "0" (kaddr), "I" (PAGE_SIZE / 64)
+ : "r1", "r2", "r3", "ip", "lr");
+ kunmap_atomic(kaddr, KM_USER0);
}
struct cpu_user_fns v4_mc_user_fns __initdata = {
- .cpu_clear_user_page = v4_mc_clear_user_page,
- .cpu_copy_user_page = v4_mc_copy_user_page,
+ .cpu_clear_user_highpage = v4_mc_clear_user_highpage,
+ .cpu_copy_user_highpage = v4_mc_copy_user_highpage,
};
+++ /dev/null
-/*
- * linux/arch/arm/lib/copypage.S
- *
- * Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-
- .text
- .align 5
-/*
- * ARMv4 optimised copy_user_page
- *
- * We flush the destination cache lines just before we write the data into the
- * corresponding address. Since the Dcache is read-allocate, this removes the
- * Dcache aliasing issue. The writes will be forwarded to the write buffer,
- * and merged as appropriate.
- *
- * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
- * instruction. If your processor does not supply this, you have to write your
- * own copy_user_page that does the right thing.
- */
-ENTRY(v4wb_copy_user_page)
- stmfd sp!, {r4, lr} @ 2
- mov r2, #PAGE_SZ/64 @ 1
- ldmia r1!, {r3, r4, ip, lr} @ 4
-1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4
- mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4
- subs r2, r2, #1 @ 1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmneia r1!, {r3, r4, ip, lr} @ 4
- bne 1b @ 1
- mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB
- ldmfd sp!, {r4, pc} @ 3
-
- .align 5
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-ENTRY(v4wb_clear_user_page)
- str lr, [sp, #-4]!
- mov r1, #PAGE_SZ/64 @ 1
- mov r2, #0 @ 1
- mov r3, #0 @ 1
- mov ip, #0 @ 1
- mov lr, #0 @ 1
-1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- subs r1, r1, #1 @ 1
- bne 1b @ 1
- mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB
- ldr pc, [sp], #4
-
- __INITDATA
-
- .type v4wb_user_fns, #object
-ENTRY(v4wb_user_fns)
- .long v4wb_clear_user_page
- .long v4wb_copy_user_page
- .size v4wb_user_fns, . - v4wb_user_fns
--- /dev/null
+/*
+ * linux/arch/arm/mm/copypage-v4wb.c
+ *
+ * Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * ARMv4 optimised copy_user_highpage
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address. Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue. The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ *
+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
+ * instruction. If your processor does not supply this, you have to write your
+ * own copy_user_highpage that does the right thing.
+ */
+static void __attribute__((naked))
+v4wb_copy_user_page(void *kto, const void *kfrom)
+{
+ asm("\
+ stmfd sp!, {r4, lr} @ 2\n\
+ mov r2, %0 @ 1\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4\n\
+1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia r0!, {r3, r4, ip, lr} @ 4\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\
+ stmia r0!, {r3, r4, ip, lr} @ 4\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4\n\
+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia r0!, {r3, r4, ip, lr} @ 4\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4\n\
+ subs r2, r2, #1 @ 1\n\
+ stmia r0!, {r3, r4, ip, lr} @ 4\n\
+ ldmneia r1!, {r3, r4, ip, lr} @ 4\n\
+ bne 1b @ 1\n\
+ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\
+ ldmfd sp!, {r4, pc} @ 3"
+ :
+ : "I" (PAGE_SIZE / 64));
+}
+
+void v4wb_copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr)
+{
+ void *kto, *kfrom;
+
+ kto = kmap_atomic(to, KM_USER0);
+ kfrom = kmap_atomic(from, KM_USER1);
+ v4wb_copy_user_page(kto, kfrom);
+ kunmap_atomic(kfrom, KM_USER1);
+ kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * ARMv4 optimised clear_user_page
+ *
+ * Same story as above.
+ */
+void v4wb_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+ void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+ asm volatile("\
+ mov r1, %2 @ 1\n\
+ mov r2, #0 @ 1\n\
+ mov r3, #0 @ 1\n\
+ mov ip, #0 @ 1\n\
+ mov lr, #0 @ 1\n\
+1: mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ subs r1, r1, #1 @ 1\n\
+ bne 1b @ 1\n\
+ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB"
+ : "=r" (ptr)
+ : "0" (kaddr), "I" (PAGE_SIZE / 64)
+ : "r1", "r2", "r3", "ip", "lr");
+ kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns v4wb_user_fns __initdata = {
+ .cpu_clear_user_highpage = v4wb_clear_user_highpage,
+ .cpu_copy_user_highpage = v4wb_copy_user_highpage,
+};
+++ /dev/null
-/*
- * linux/arch/arm/lib/copypage-v4.S
- *
- * Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ASM optimised string functions
- *
- * This is for CPUs with a writethrough cache and 'flush ID cache' is
- * the only supported cache operation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-
- .text
- .align 5
-/*
- * ARMv4 optimised copy_user_page
- *
- * Since we have writethrough caches, we don't have to worry about
- * dirty data in the cache. However, we do have to ensure that
- * subsequent reads are up to date.
- */
-ENTRY(v4wt_copy_user_page)
- stmfd sp!, {r4, lr} @ 2
- mov r2, #PAGE_SZ/64 @ 1
- ldmia r1!, {r3, r4, ip, lr} @ 4
-1: stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4
- subs r2, r2, #1 @ 1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmneia r1!, {r3, r4, ip, lr} @ 4
- bne 1b @ 1
- mcr p15, 0, r2, c7, c7, 0 @ flush ID cache
- ldmfd sp!, {r4, pc} @ 3
-
- .align 5
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-ENTRY(v4wt_clear_user_page)
- str lr, [sp, #-4]!
- mov r1, #PAGE_SZ/64 @ 1
- mov r2, #0 @ 1
- mov r3, #0 @ 1
- mov ip, #0 @ 1
- mov lr, #0 @ 1
-1: stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- subs r1, r1, #1 @ 1
- bne 1b @ 1
- mcr p15, 0, r2, c7, c7, 0 @ flush ID cache
- ldr pc, [sp], #4
-
- __INITDATA
-
- .type v4wt_user_fns, #object
-ENTRY(v4wt_user_fns)
- .long v4wt_clear_user_page
- .long v4wt_copy_user_page
- .size v4wt_user_fns, . - v4wt_user_fns
--- /dev/null
+/*
+ * linux/arch/arm/mm/copypage-v4wt.S
+ *
+ * Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is for CPUs with a writethrough cache and 'flush ID cache' is
+ * the only supported cache operation.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * ARMv4 optimised copy_user_highpage
+ *
+ * Since we have writethrough caches, we don't have to worry about
+ * dirty data in the cache. However, we do have to ensure that
+ * subsequent reads are up to date.
+ */
+static void __attribute__((naked))
+v4wt_copy_user_page(void *kto, const void *kfrom)
+{
+ asm("\
+ stmfd sp!, {r4, lr} @ 2\n\
+ mov r2, %0 @ 1\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4\n\
+1: stmia r0!, {r3, r4, ip, lr} @ 4\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\
+ stmia r0!, {r3, r4, ip, lr} @ 4\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4\n\
+ stmia r0!, {r3, r4, ip, lr} @ 4\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4\n\
+ subs r2, r2, #1 @ 1\n\
+ stmia r0!, {r3, r4, ip, lr} @ 4\n\
+ ldmneia r1!, {r3, r4, ip, lr} @ 4\n\
+ bne 1b @ 1\n\
+ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\
+ ldmfd sp!, {r4, pc} @ 3"
+ :
+ : "I" (PAGE_SIZE / 64));
+}
+
+void v4wt_copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr)
+{
+ void *kto, *kfrom;
+
+ kto = kmap_atomic(to, KM_USER0);
+ kfrom = kmap_atomic(from, KM_USER1);
+ v4wt_copy_user_page(kto, kfrom);
+ kunmap_atomic(kfrom, KM_USER1);
+ kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * ARMv4 optimised clear_user_page
+ *
+ * Same story as above.
+ */
+void v4wt_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+ void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+ asm volatile("\
+ mov r1, %2 @ 1\n\
+ mov r2, #0 @ 1\n\
+ mov r3, #0 @ 1\n\
+ mov ip, #0 @ 1\n\
+ mov lr, #0 @ 1\n\
+1: stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ stmia %0!, {r2, r3, ip, lr} @ 4\n\
+ subs r1, r1, #1 @ 1\n\
+ bne 1b @ 1\n\
+ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache"
+ : "=r" (ptr)
+ : "0" (kaddr), "I" (PAGE_SIZE / 64)
+ : "r1", "r2", "r3", "ip", "lr");
+ kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns v4wt_user_fns __initdata = {
+ .cpu_clear_user_highpage = v4wt_clear_user_highpage,
+ .cpu_copy_user_highpage = v4wt_copy_user_highpage,
+};
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
+#include <linux/highmem.h>
-#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/shmparam.h>
#include <asm/tlbflush.h>
* Copy the user page. No aliasing to deal with so we can just
* attack the kernel's existing mapping of these pages.
*/
-static void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void v6_copy_user_highpage_nonaliasing(struct page *to,
+ struct page *from, unsigned long vaddr)
{
+ void *kto, *kfrom;
+
+ kfrom = kmap_atomic(from, KM_USER0);
+ kto = kmap_atomic(to, KM_USER1);
copy_page(kto, kfrom);
+ kunmap_atomic(kto, KM_USER1);
+ kunmap_atomic(kfrom, KM_USER0);
}
/*
* Clear the user page. No aliasing to deal with so we can just
* attack the kernel's existing mapping of this page.
*/
-static void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_highpage_nonaliasing(struct page *page, unsigned long vaddr)
{
+ void *kaddr = kmap_atomic(page, KM_USER0);
clear_page(kaddr);
+ kunmap_atomic(kaddr, KM_USER0);
}
/*
- * Copy the page, taking account of the cache colour.
+ * Discard data in the kernel mapping for the new page.
+ * FIXME: needs this MCRR to be supported.
*/
-static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void discard_old_kernel_data(void *kto)
{
- unsigned int offset = CACHE_COLOUR(vaddr);
- unsigned long from, to;
- struct page *page = virt_to_page(kfrom);
-
- if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
- __flush_dcache_page(page_mapping(page), page);
-
- /*
- * Discard data in the kernel mapping for the new page.
- * FIXME: needs this MCRR to be supported.
- */
__asm__("mcrr p15, 0, %1, %0, c6 @ 0xec401f06"
:
: "r" (kto),
"r" ((unsigned long)kto + PAGE_SIZE - L1_CACHE_BYTES)
: "cc");
+}
+
+/*
+ * Copy the page, taking account of the cache colour.
+ */
+static void v6_copy_user_highpage_aliasing(struct page *to,
+ struct page *from, unsigned long vaddr)
+{
+ unsigned int offset = CACHE_COLOUR(vaddr);
+ unsigned long kfrom, kto;
+
+ if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+ __flush_dcache_page(page_mapping(from), from);
+
+ /* FIXME: not highmem safe */
+ discard_old_kernel_data(page_address(to));
/*
* Now copy the page using the same cache colour as the
*/
spin_lock(&v6_lock);
- set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL), 0);
- set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL), 0);
+ set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0);
+ set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0);
- from = from_address + (offset << PAGE_SHIFT);
- to = to_address + (offset << PAGE_SHIFT);
+ kfrom = from_address + (offset << PAGE_SHIFT);
+ kto = to_address + (offset << PAGE_SHIFT);
- flush_tlb_kernel_page(from);
- flush_tlb_kernel_page(to);
+ flush_tlb_kernel_page(kfrom);
+ flush_tlb_kernel_page(kto);
- copy_page((void *)to, (void *)from);
+ copy_page((void *)kto, (void *)kfrom);
spin_unlock(&v6_lock);
}
* so remap the kernel page into the same cache colour as the user
* page.
*/
-static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vaddr)
{
unsigned int offset = CACHE_COLOUR(vaddr);
unsigned long to = to_address + (offset << PAGE_SHIFT);
- /*
- * Discard data in the kernel mapping for the new page
- * FIXME: needs this MCRR to be supported.
- */
- __asm__("mcrr p15, 0, %1, %0, c6 @ 0xec401f06"
- :
- : "r" (kaddr),
- "r" ((unsigned long)kaddr + PAGE_SIZE - L1_CACHE_BYTES)
- : "cc");
+ /* FIXME: not highmem safe */
+ discard_old_kernel_data(page_address(page));
/*
* Now clear the page using the same cache colour as
*/
spin_lock(&v6_lock);
- set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL), 0);
+ set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0);
flush_tlb_kernel_page(to);
clear_page((void *)to);
}
struct cpu_user_fns v6_user_fns __initdata = {
- .cpu_clear_user_page = v6_clear_user_page_nonaliasing,
- .cpu_copy_user_page = v6_copy_user_page_nonaliasing,
+ .cpu_clear_user_highpage = v6_clear_user_highpage_nonaliasing,
+ .cpu_copy_user_highpage = v6_copy_user_highpage_nonaliasing,
};
static int __init v6_userpage_init(void)
{
if (cache_is_vipt_aliasing()) {
- cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing;
- cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing;
+ cpu_user.cpu_clear_user_highpage = v6_clear_user_highpage_aliasing;
+ cpu_user.cpu_copy_user_highpage = v6_copy_user_highpage_aliasing;
}
return 0;
+++ /dev/null
-/*
- * linux/arch/arm/lib/copypage-xsc3.S
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Adapted for 3rd gen XScale core, no more mini-dcache
- * Author: Matt Gilbert (matthew.m.gilbert@intel.com)
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-
-/*
- * General note:
- * We don't really want write-allocate cache behaviour for these functions
- * since that will just eat through 8K of the cache.
- */
-
- .text
- .align 5
-/*
- * XSC3 optimised copy_user_page
- * r0 = destination
- * r1 = source
- * r2 = virtual user address of ultimate destination page
- *
- * The source page may have some clean entries in the cache already, but we
- * can safely ignore them - break_cow() will flush them out of the cache
- * if we eventually end up using our copied page.
- *
- */
-ENTRY(xsc3_mc_copy_user_page)
- stmfd sp!, {r4, r5, lr}
- mov lr, #PAGE_SZ/64-1
-
- pld [r1, #0]
- pld [r1, #32]
-1: pld [r1, #64]
- pld [r1, #96]
-
-2: ldrd r2, [r1], #8
- mov ip, r0
- ldrd r4, [r1], #8
- mcr p15, 0, ip, c7, c6, 1 @ invalidate
- strd r2, [r0], #8
- ldrd r2, [r1], #8
- strd r4, [r0], #8
- ldrd r4, [r1], #8
- strd r2, [r0], #8
- strd r4, [r0], #8
- ldrd r2, [r1], #8
- mov ip, r0
- ldrd r4, [r1], #8
- mcr p15, 0, ip, c7, c6, 1 @ invalidate
- strd r2, [r0], #8
- ldrd r2, [r1], #8
- subs lr, lr, #1
- strd r4, [r0], #8
- ldrd r4, [r1], #8
- strd r2, [r0], #8
- strd r4, [r0], #8
- bgt 1b
- beq 2b
-
- ldmfd sp!, {r4, r5, pc}
-
- .align 5
-/*
- * XScale optimised clear_user_page
- * r0 = destination
- * r1 = virtual user address of ultimate destination page
- */
-ENTRY(xsc3_mc_clear_user_page)
- mov r1, #PAGE_SZ/32
- mov r2, #0
- mov r3, #0
-1: mcr p15, 0, r0, c7, c6, 1 @ invalidate line
- strd r2, [r0], #8
- strd r2, [r0], #8
- strd r2, [r0], #8
- strd r2, [r0], #8
- subs r1, r1, #1
- bne 1b
- mov pc, lr
-
- __INITDATA
-
- .type xsc3_mc_user_fns, #object
-ENTRY(xsc3_mc_user_fns)
- .long xsc3_mc_clear_user_page
- .long xsc3_mc_copy_user_page
- .size xsc3_mc_user_fns, . - xsc3_mc_user_fns
--- /dev/null
+/*
+ * linux/arch/arm/mm/copypage-xsc3.S
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adapted for 3rd gen XScale core, no more mini-dcache
+ * Author: Matt Gilbert (matthew.m.gilbert@intel.com)
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * General note:
+ * We don't really want write-allocate cache behaviour for these functions
+ * since that will just eat through 8K of the cache.
+ */
+
+/*
+ * XSC3 optimised copy_user_highpage
+ * r0 = destination
+ * r1 = source
+ *
+ * The source page may have some clean entries in the cache already, but we
+ * can safely ignore them - break_cow() will flush them out of the cache
+ * if we eventually end up using our copied page.
+ *
+ */
+static void __attribute__((naked))
+xsc3_mc_copy_user_page(void *kto, const void *kfrom)
+{
+ asm("\
+ stmfd sp!, {r4, r5, lr} \n\
+ mov lr, %0 \n\
+ \n\
+ pld [r1, #0] \n\
+ pld [r1, #32] \n\
+1: pld [r1, #64] \n\
+ pld [r1, #96] \n\
+ \n\
+2: ldrd r2, [r1], #8 \n\
+ mov ip, r0 \n\
+ ldrd r4, [r1], #8 \n\
+ mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\
+ strd r2, [r0], #8 \n\
+ ldrd r2, [r1], #8 \n\
+ strd r4, [r0], #8 \n\
+ ldrd r4, [r1], #8 \n\
+ strd r2, [r0], #8 \n\
+ strd r4, [r0], #8 \n\
+ ldrd r2, [r1], #8 \n\
+ mov ip, r0 \n\
+ ldrd r4, [r1], #8 \n\
+ mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\
+ strd r2, [r0], #8 \n\
+ ldrd r2, [r1], #8 \n\
+ subs lr, lr, #1 \n\
+ strd r4, [r0], #8 \n\
+ ldrd r4, [r1], #8 \n\
+ strd r2, [r0], #8 \n\
+ strd r4, [r0], #8 \n\
+ bgt 1b \n\
+ beq 2b \n\
+ \n\
+ ldmfd sp!, {r4, r5, pc}"
+ :
+ : "I" (PAGE_SIZE / 64 - 1));
+}
+
+void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr)
+{
+ void *kto, *kfrom;
+
+ kto = kmap_atomic(to, KM_USER0);
+ kfrom = kmap_atomic(from, KM_USER1);
+ xsc3_mc_copy_user_page(kto, kfrom);
+ kunmap_atomic(kfrom, KM_USER1);
+ kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * XScale optimised clear_user_page
+ * r0 = destination
+ * r1 = virtual user address of ultimate destination page
+ */
+void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+ void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+ asm volatile ("\
+ mov r1, %2 \n\
+ mov r2, #0 \n\
+ mov r3, #0 \n\
+1: mcr p15, 0, %0, c7, c6, 1 @ invalidate line\n\
+ strd r2, [%0], #8 \n\
+ strd r2, [%0], #8 \n\
+ strd r2, [%0], #8 \n\
+ strd r2, [%0], #8 \n\
+ subs r1, r1, #1 \n\
+ bne 1b"
+ : "=r" (ptr)
+ : "0" (kaddr), "I" (PAGE_SIZE / 32)
+ : "r1", "r2", "r3");
+ kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns xsc3_mc_user_fns __initdata = {
+ .cpu_clear_user_highpage = xsc3_mc_clear_user_highpage,
+ .cpu_copy_user_highpage = xsc3_mc_copy_user_highpage,
+};
*/
#include <linux/init.h>
#include <linux/mm.h>
+#include <linux/highmem.h>
-#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
static DEFINE_SPINLOCK(minicache_lock);
/*
- * XScale mini-dcache optimised copy_user_page
+ * XScale mini-dcache optimised copy_user_highpage
*
* We flush the destination cache lines just before we write the data into the
* corresponding address. Since the Dcache is read-allocate, this removes the
: "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1));
}
-void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr)
{
- struct page *page = virt_to_page(kfrom);
+ void *kto = kmap_atomic(to, KM_USER1);
- if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
- __flush_dcache_page(page_mapping(page), page);
+ if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+ __flush_dcache_page(page_mapping(from), from);
spin_lock(&minicache_lock);
- set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0);
+ set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0);
flush_tlb_kernel_page(COPYPAGE_MINICACHE);
mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
spin_unlock(&minicache_lock);
+
+ kunmap_atomic(kto, KM_USER1);
}
/*
* XScale optimised clear_user_page
*/
-void __attribute__((naked))
-xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+void
+xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
{
+ void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
asm volatile(
- "mov r1, %0 \n\
+ "mov r1, %2 \n\
mov r2, #0 \n\
mov r3, #0 \n\
-1: mov ip, r0 \n\
- strd r2, [r0], #8 \n\
- strd r2, [r0], #8 \n\
- strd r2, [r0], #8 \n\
- strd r2, [r0], #8 \n\
+1: mov ip, %0 \n\
+ strd r2, [%0], #8 \n\
+ strd r2, [%0], #8 \n\
+ strd r2, [%0], #8 \n\
+ strd r2, [%0], #8 \n\
mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\
subs r1, r1, #1 \n\
mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\
- bne 1b \n\
- mov pc, lr"
- :
- : "I" (PAGE_SIZE / 32));
+ bne 1b"
+ : "=r" (ptr)
+ : "0" (kaddr), "I" (PAGE_SIZE / 32)
+ : "r1", "r2", "r3", "ip");
+ kunmap_atomic(kaddr, KM_USER0);
}
struct cpu_user_fns xscale_mc_user_fns __initdata = {
- .cpu_clear_user_page = xscale_mc_clear_user_page,
- .cpu_copy_user_page = xscale_mc_copy_user_page,
+ .cpu_clear_user_highpage = xscale_mc_clear_user_highpage,
+ .cpu_copy_user_highpage = xscale_mc_copy_user_highpage,
};
#include <linux/init.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
+#include <linux/page-flags.h>
#include <asm/system.h>
#include <asm/pgtable.h>
break;
}
-#ifndef CONFIG_HIGHMEM
/* We must not map this if we have highmem enabled */
+ if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
+ break;
+
pte = pte_offset_map(pmd, addr);
printk(", *pte=%08lx", pte_val(*pte));
printk(", *ppte=%08lx", pte_val(pte[-PTRS_PER_PTE]));
pte_unmap(pte);
-#endif
} while(0);
printk("\n");
#include <linux/initrd.h>
#include <asm/mach-types.h>
+#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
__tagtable(ATAG_INITRD2, parse_tag_initrd2);
/*
- * This is used to pass memory configuration data from paging_init
- * to mem_init, and by show_mem() to skip holes in the memory map.
+ * This keeps memory configuration data used by a couple memory
+ * initialization functions, as well as show_mem() for the skipping
+ * of holes in the memory map. It is populated by arm_add_memory().
*/
-static struct meminfo meminfo = { 0, };
+struct meminfo meminfo;
void show_mem(void)
{
{
unsigned int start_pfn, i, bootmap_pfn;
- start_pfn = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
+ start_pfn = PAGE_ALIGN(__pa(_end)) >> PAGE_SHIFT;
bootmap_pfn = 0;
for_each_nodebank(i, mi, node) {
free_area_init_node(node, zone_size, start_pfn, zhole_size);
}
-void __init bootmem_init(struct meminfo *mi)
+void __init bootmem_init(void)
{
+ struct meminfo *mi = &meminfo;
unsigned long memend_pfn = 0;
int node, initrd_node;
- memcpy(&meminfo, mi, sizeof(meminfo));
-
/*
* Locate which node contains the ramdisk image, if any.
*/
max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
}
-static inline void free_area(unsigned long addr, unsigned long end, char *s)
+static inline int free_area(unsigned long pfn, unsigned long end, char *s)
{
- unsigned int size = (end - addr) >> 10;
+ unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10);
- for (; addr < end; addr += PAGE_SIZE) {
- struct page *page = virt_to_page(addr);
+ for (; pfn < end; pfn++) {
+ struct page *page = pfn_to_page(pfn);
ClearPageReserved(page);
init_page_count(page);
- free_page(addr);
- totalram_pages++;
+ __free_page(page);
+ pages++;
}
if (size && s)
printk(KERN_INFO "Freeing %s memory: %dK\n", s, size);
+
+ return pages;
}
static inline void
*/
void __init mem_init(void)
{
- unsigned int codepages, datapages, initpages;
+ unsigned int codesize, datasize, initsize;
int i, node;
- codepages = &_etext - &_text;
- datapages = &_end - &__data_start;
- initpages = &__init_end - &__init_begin;
-
#ifndef CONFIG_DISCONTIGMEM
max_mapnr = virt_to_page(high_memory) - mem_map;
#endif
#ifdef CONFIG_SA1111
/* now that our DMA memory is actually so designated, we can free it */
- free_area(PAGE_OFFSET, (unsigned long)swapper_pg_dir, NULL);
+ totalram_pages += free_area(PHYS_PFN_OFFSET,
+ __phys_to_pfn(__pa(swapper_pg_dir)), NULL);
#endif
/*
* real number of pages we have in this system
*/
printk(KERN_INFO "Memory:");
-
num_physpages = 0;
for (i = 0; i < meminfo.nr_banks; i++) {
num_physpages += bank_pfn_size(&meminfo.bank[i]);
printk(" %ldMB", bank_phys_size(&meminfo.bank[i]) >> 20);
}
-
printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
+
+ codesize = _etext - _text;
+ datasize = _end - _data;
+ initsize = __init_end - __init_begin;
+
printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
"%dK data, %dK init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
- codepages >> 10, datapages >> 10, initpages >> 10);
+ codesize >> 10, datasize >> 10, initsize >> 10);
if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
extern int sysctl_overcommit_memory;
void free_initmem(void)
{
- if (!machine_is_integrator() && !machine_is_cintegrator()) {
- free_area((unsigned long)(&__init_begin),
- (unsigned long)(&__init_end),
- "init");
- }
+ if (!machine_is_integrator() && !machine_is_cintegrator())
+ totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
+ __phys_to_pfn(__pa(__init_end)),
+ "init");
}
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (!keep_initrd)
- free_area(start, end, "initrd");
+ totalram_pages += free_area(__phys_to_pfn(__pa(start)),
+ __phys_to_pfn(__pa(end)),
+ "initrd");
}
static int __init keepinitrd_setup(char *__unused)
struct pglist_data;
void __init create_mapping(struct map_desc *md);
-void __init bootmem_init(struct meminfo *mi);
+void __init bootmem_init(void);
void reserve_node_zero(struct pglist_data *pgdat);
-
-extern void _text, _stext, _etext, __data_start, _end, __init_begin, __init_end;
#include <asm/cputype.h>
#include <asm/mach-types.h>
+#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
"vmalloc area too small, limiting to %luMB\n",
vmalloc_reserve >> 20);
}
+
+ if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
+ vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
+ printk(KERN_WARNING
+ "vmalloc area is too big, limiting to %luMB\n",
+ vmalloc_reserve >> 20);
+ }
}
__early_param("vmalloc=", early_vmalloc);
#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
-static int __init check_membank_valid(struct membank *mb)
+static void __init sanity_check_meminfo(void)
{
- /*
- * Check whether this memory region has non-zero size or
- * invalid node number.
- */
- if (mb->size == 0 || mb->node >= MAX_NUMNODES)
- return 0;
-
- /*
- * Check whether this memory region would entirely overlap
- * the vmalloc area.
- */
- if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
- printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
- "(vmalloc region overlap).\n",
- mb->start, mb->start + mb->size - 1);
- return 0;
- }
-
- /*
- * Check whether this memory region would partially overlap
- * the vmalloc area.
- */
- if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
- phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
- unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
-
- printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
- "to -%.8lx (vmalloc region overlap).\n",
- mb->start, mb->start + mb->size - 1,
- mb->start + newsize - 1);
- mb->size = newsize;
- }
+ int i, j;
- return 1;
-}
+ for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
+ struct membank *bank = &meminfo.bank[j];
+ *bank = meminfo.bank[i];
-static void __init sanity_check_meminfo(struct meminfo *mi)
-{
- int i, j;
+#ifdef CONFIG_HIGHMEM
+ /*
+ * Split those memory banks which are partially overlapping
+ * the vmalloc area greatly simplifying things later.
+ */
+ if (__va(bank->start) < VMALLOC_MIN &&
+ bank->size > VMALLOC_MIN - __va(bank->start)) {
+ if (meminfo.nr_banks >= NR_BANKS) {
+ printk(KERN_CRIT "NR_BANKS too low, "
+ "ignoring high memory\n");
+ } else {
+ memmove(bank + 1, bank,
+ (meminfo.nr_banks - i) * sizeof(*bank));
+ meminfo.nr_banks++;
+ i++;
+ bank[1].size -= VMALLOC_MIN - __va(bank->start);
+ bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+ j++;
+ }
+ bank->size = VMALLOC_MIN - __va(bank->start);
+ }
+#else
+ /*
+ * Check whether this memory bank would entirely overlap
+ * the vmalloc area.
+ */
+ if (__va(bank->start) >= VMALLOC_MIN) {
+ printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+ "(vmalloc region overlap).\n",
+ bank->start, bank->start + bank->size - 1);
+ continue;
+ }
- for (i = 0, j = 0; i < mi->nr_banks; i++) {
- if (check_membank_valid(&mi->bank[i]))
- mi->bank[j++] = mi->bank[i];
+ /*
+ * Check whether this memory bank would partially overlap
+ * the vmalloc area.
+ */
+ if (__va(bank->start + bank->size) > VMALLOC_MIN ||
+ __va(bank->start + bank->size) < __va(bank->start)) {
+ unsigned long newsize = VMALLOC_MIN - __va(bank->start);
+ printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+ "to -%.8lx (vmalloc region overlap).\n",
+ bank->start, bank->start + bank->size - 1,
+ bank->start + newsize - 1);
+ bank->size = newsize;
+ }
+#endif
+ j++;
}
- mi->nr_banks = j;
+ meminfo.nr_banks = j;
}
-static inline void prepare_page_table(struct meminfo *mi)
+static inline void prepare_page_table(void)
{
unsigned long addr;
#ifdef CONFIG_XIP_KERNEL
/* The XIP kernel is mapped in the module area -- skip over it */
- addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+ addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
#endif
for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
* Clear out all the kernel space mappings, except for the first
* memory bank, up to the end of the vmalloc region.
*/
- for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+ for (addr = __phys_to_virt(bank_phys_end(&meminfo.bank[0]));
addr < VMALLOC_END; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
}
* Note that this can only be in node 0.
*/
#ifdef CONFIG_XIP_KERNEL
- reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start,
+ reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
BOOTMEM_DEFAULT);
#else
- reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext,
+ reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
BOOTMEM_DEFAULT);
#endif
* Allocate the vector page early.
*/
vectors = alloc_bootmem_low_pages(PAGE_SIZE);
- BUG_ON(!vectors);
for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
#ifdef CONFIG_XIP_KERNEL
map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
map.virtual = MODULES_VADDR;
- map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+ map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
map.type = MT_ROM;
create_mapping(&map);
#endif
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
*/
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+void __init paging_init(struct machine_desc *mdesc)
{
void *zero_page;
build_mem_type_table();
- sanity_check_meminfo(mi);
- prepare_page_table(mi);
- bootmem_init(mi);
+ sanity_check_meminfo();
+ prepare_page_table();
+ bootmem_init();
devicemaps_init(mdesc);
top_pmd = pmd_off_k(0xffff0000);
/*
- * allocate the zero page. Note that we count on this going ok.
+ * allocate the zero page. Note that this always succeeds and
+ * returns a zeroed result.
*/
zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
- memzero(zero_page, PAGE_SIZE);
empty_zero_page = virt_to_page(zero_page);
flush_dcache_page(empty_zero_page);
}
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/sections.h>
#include <asm/page.h>
#include <asm/mach/arch.h>
* Note that this can only be in node 0.
*/
#ifdef CONFIG_XIP_KERNEL
- reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start,
+ reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
BOOTMEM_DEFAULT);
#else
- reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext,
+ reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
BOOTMEM_DEFAULT);
#endif
BOOTMEM_DEFAULT);
}
-static void __init sanity_check_meminfo(struct meminfo *mi)
-{
- int i, j;
-
- for (i = 0, j = 0; i < mi->nr_banks; i++) {
- struct membank *mb = &mi->bank[i];
-
- if (mb->size != 0 && mb->node < MAX_NUMNODES)
- mi->bank[j++] = mi->bank[i];
- }
- mi->nr_banks = j;
-}
-
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
*/
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+void __init paging_init(struct machine_desc *mdesc)
{
- sanity_check_meminfo(mi);
- bootmem_init(mi);
+ bootmem_init();
}
/*
if (!new_pgd)
goto no_pgd;
- memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
+ memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
/*
* Copy over the kernel and IO PGD entries
#ifdef CONFIG_MMU
#ifndef MULTI_USER
-EXPORT_SYMBOL(__cpu_clear_user_page);
-EXPORT_SYMBOL(__cpu_copy_user_page);
+EXPORT_SYMBOL(__cpu_clear_user_highpage);
+EXPORT_SYMBOL(__cpu_copy_user_highpage);
#else
EXPORT_SYMBOL(cpu_user);
#endif
* IRQs are already disabled.
*/
ENTRY(cpu_v6_do_idle)
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
mov pc, lr
#define TTB_C (1 << 0)
#define TTB_S (1 << 1)
+#define TTB_RGN_NC (0 << 3)
+#define TTB_RGN_OC_WBWA (1 << 3)
#define TTB_RGN_OC_WT (2 << 3)
#define TTB_RGN_OC_WB (3 << 3)
+#ifndef CONFIG_SMP
+#define TTB_FLAGS TTB_C|TTB_RGN_OC_WB @ mark PTWs cacheable, outer WB
+#else
+#define TTB_FLAGS TTB_C|TTB_S|TTB_RGN_OC_WBWA @ mark PTWs cacheable and shared, outer WBWA
+#endif
+
ENTRY(cpu_v7_proc_init)
mov pc, lr
ENDPROC(cpu_v7_proc_init)
* IRQs are already disabled.
*/
ENTRY(cpu_v7_do_idle)
+ dsb @ WFI may enter a low-power mode
wfi
mov pc, lr
ENDPROC(cpu_v7_do_idle)
#ifdef CONFIG_MMU
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
- orr r0, r0, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB
+ orr r0, r0, #TTB_FLAGS
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
* - cache type register is implemented
*/
__v7_setup:
+#ifdef CONFIG_SMP
+ mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode
+ orr r0, r0, #(0x1 << 6)
+ mcr p15, 0, r0, c1, c0, 1
+#endif
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r10, c2, c0, 2 @ TTB control register
- orr r4, r4, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB
- mcr p15, 0, r4, c2, c0, 0 @ load TTB0
+ orr r4, r4, #TTB_FLAGS
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
.long xsc3_mc_user_fns
.long xsc3_cache_fns
.size __xsc3_proc_info, . - __xsc3_proc_info
+
+/* Note: PXA935 changed its implementor ID from Intel to Marvell */
+
+ .type __xsc3_pxa935_proc_info,#object
+__xsc3_pxa935_proc_info:
+ .long 0x56056000
+ .long 0xffffe000
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xsc3_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_xsc3_name
+ .long xsc3_processor_functions
+ .long v4wbi_tlb_fns
+ .long xsc3_mc_user_fns
+ .long xsc3_cache_fns
+ .size __xsc3_pxa935_proc_info, . - __xsc3_pxa935_proc_info
config ARCH_MX2
bool "MX2-based"
+ select CPU_ARM926T
help
This enables support for systems based on the Freescale i.MX2 family
config ARCH_MX3
bool "MX3-based"
+ select CPU_V6
help
This enables support for systems based on the Freescale i.MX3 family
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/dma-mx1-mx2.h>
#define DMA_DCR 0x00 /* Control Register */
* MA 02110-1301, USA.
*/
-#include <asm/dma.h>
+#include <mach/dma.h>
#ifndef __ASM_ARCH_MXC_DMA_H
#define __ASM_ARCH_MXC_DMA_H
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#endif
#endif
/* io address mapping macro */
-#define __io(a) ((void __iomem *)(a))
+#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
+#define __mem_pci(a) (a)
#endif
#include <mach/hardware.h>
-/*
- * Virtual view <-> DMA view memory address translations
- * This macro is used to translate the virtual address to an address
- * suitable to be passed to set_dma_addr()
- */
-#define __virt_to_bus(a) __virt_to_phys(a)
-
-/*
- * Used to convert an address for DMA operations to an address that the
- * kernel can use.
- */
-#define __bus_to_virt(a) __phys_to_virt(a)
-
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
config ARCH_OMAP2
bool "TI OMAP2"
+ select CPU_V6
config ARCH_OMAP3
bool "TI OMAP3"
+ select CPU_V7
endchoice
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/tc.h>
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
+#define OMAP24XX_GPIO_WAKE_EN 0x0020
#define OMAP24XX_GPIO_CTRL 0x0030
#define OMAP24XX_GPIO_OE 0x0034
#define OMAP24XX_GPIO_DATAIN 0x0038
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
- wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+ wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
{
int i;
- if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+ if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
return 0;
for (i = 0; i < gpio_bank_count; i++) {
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
/*
* ----------------------------------------------------------------------------
* ----------------------------------------------------------------------------
*/
-#define PCIO_BASE 0
-
#if defined(CONFIG_ARCH_OMAP1)
#define IO_PHYS 0xFFFB0000
#define PHYS_OFFSET UL(0x80000000)
#endif
-/*
- * Conversion between SDRAM and fake PCI bus, used by USB
- * NOTE: Physical address must be converted to Local Bus address
- * on OMAP-1510 only
- */
-
/*
* Bus address is physical address, except for OMAP-1510 Local Bus.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
* OMAP-1510 bus address is translated into a Local Bus address if the
* OMAP bus type is lbus. We do the address translation based on the
* device overriding the defaults used in the dma-mapping API.
#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \
(dma_addr_t)virt_to_lbus(page_address(page)) : \
- (dma_addr_t)__virt_to_bus(page_address(page));})
+ (dma_addr_t)__virt_to_phys(page_address(page));})
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
- __bus_to_virt(addr)); })
+ __phys_to_virt(addr)); })
#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
(dma_addr_t) (is_lbus_device(dev) ? \
virt_to_lbus(__addr) : \
- __virt_to_bus(__addr)); })
+ __virt_to_phys(__addr)); })
#endif /* CONFIG_ARCH_OMAP15XX */
* clk_allow_idle - Counters previous clk_deny_idle
* @clk: clock signal handle
*/
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
#include <linux/mbus.h>
+enum orion_ehci_phy_ver {
+ EHCI_PHY_ORION,
+ EHCI_PHY_DD,
+ EHCI_PHY_KW,
+ EHCI_PHY_NA,
+};
+
struct orion_ehci_data {
struct mbus_dram_target_info *dram;
+ enum orion_ehci_phy_ver phy_version;
};
/* defines for UART registers */
#include <plat/regs-serial.h>
-#include <asm/plat-s3c/regs-watchdog.h>
+#include <plat/regs-watchdog.h>
/* working in physical space... */
#undef S3C2410_WDOGREG
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
#include <plat/common-smdk.h>
#include <plat/devs.h>
#include <asm/irq.h>
#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
/* Serial port registrations */
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
-#include <asm/mach/dma.h>
#include <mach/map.h>
#include <plat/dma.h>
* allowed to go through.
*/
-int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
unsigned long flags;
}
int
-s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
+s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
* dcon: base value of the DCONx register
*/
-int s3c2410_dma_config(dmach_t channel,
+int s3c2410_dma_config(unsigned int channel,
int xferunit,
int dcon)
{
EXPORT_SYMBOL(s3c2410_dma_config);
-int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
* irq?
*/
-int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
* returns the current transfer points for the dma source and destination
*/
-int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
+int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
{
struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Sep 25 10:10:50 2008
+# Last update: Sun Nov 30 16:39:36 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
olip8 MACH_OLIP8 OLIP8 1378
ghi270hg MACH_GHI270HG GHI270HG 1379
davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380
-davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381
+davinci_dm355_evm MACH_DAVINCI_DM355_EVM DAVINCI_DM355_EVM 1381
blackriver MACH_BLACKRIVER BLACKRIVER 1383
sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384
cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385
at572d940deb MACH_AT572D940DEB AT572D940DEB 1780
davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781
ep9302 MACH_EP9302 EP9302 1782
-at572d940hfeb MACH_AT572D940HFEB AT572D940HFEB 1783
+at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783
cybook3 MACH_CYBOOK3 CYBOOK3 1784
wdg002 MACH_WDG002 WDG002 1785
sg560adsl MACH_SG560ADSL SG560ADSL 1786
asusp535 MACH_ASUSP535 ASUSP535 1909
htcraphael MACH_HTCRAPHAEL HTCRAPHAEL 1910
sygdg1 MACH_SYGDG1 SYGDG1 1911
+sygdg2 MACH_SYGDG2 SYGDG2 1912
+seoul MACH_SEOUL SEOUL 1913
+salerno MACH_SALERNO SALERNO 1914
+ucn_s3c64xx MACH_UCN_S3C64XX UCN_S3C64XX 1915
+msm7201a MACH_MSM7201A MSM7201A 1916
+lpr1 MACH_LPR1 LPR1 1917
+armadillo500fx MACH_ARMADILLO500FX ARMADILLO500FX 1918
+g3evm MACH_G3EVM G3EVM 1919
+z3_dm355 MACH_Z3_DM355 Z3_DM355 1920
+w90p910evb MACH_W90P910EVB W90P910EVB 1921
+w90p920evb MACH_W90P920EVB W90P920EVB 1922
+w90p950evb MACH_W90P950EVB W90P950EVB 1923
+w90n960evb MACH_W90N960EVB W90N960EVB 1924
+camhd MACH_CAMHD CAMHD 1925
+mvc100 MACH_MVC100 MVC100 1926
+electrum_200 MACH_ELECTRUM_200 ELECTRUM_200 1927
+htcjade MACH_HTCJADE HTCJADE 1928
+memphis MACH_MEMPHIS MEMPHIS 1929
+imx27sbc MACH_IMX27SBC IMX27SBC 1930
+lextar MACH_LEXTAR LEXTAR 1931
+mv88f6281gtw_ge MACH_MV88F6281GTW_GE MV88F6281GTW_GE 1932
+ncp MACH_NCP NCP 1933
+z32an_series MACH_Z32AN Z32AN 1934
+tmq_capd MACH_TMQ_CAPD TMQ_CAPD 1935
+omap3_wl MACH_OMAP3_WL OMAP3_WL 1936
+chumby MACH_CHUMBY CHUMBY 1937
+atsarm9 MACH_ATSARM9 ATSARM9 1938
+davinci_dm365_evm MACH_DAVINCI_DM365_EVM DAVINCI_DM365_EVM 1939
+bahamas MACH_BAHAMAS BAHAMAS 1940
+das MACH_DAS DAS 1941
+minidas MACH_MINIDAS MINIDAS 1942
+vk1000 MACH_VK1000 VK1000 1943
+centro MACH_CENTRO CENTRO 1944
+ctera_2bay MACH_CTERA_2BAY CTERA_2BAY 1945
+edgeconnect MACH_EDGECONNECT EDGECONNECT 1946
+nd27000 MACH_ND27000 ND27000 1947
+cobra MACH_GEMALTO_COBRA GEMALTO_COBRA 1948
+ingelabs_comet MACH_INGELABS_COMET INGELABS_COMET 1949
+pollux_wiz MACH_POLLUX_WIZ POLLUX_WIZ 1950
+blackstone MACH_BLACKSTONE BLACKSTONE 1951
+topaz MACH_TOPAZ TOPAZ 1952
+aixle MACH_AIXLE AIXLE 1953
+mw998 MACH_MW998 MW998 1954
+nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955
+vsc5605ev MACH_VSC5605EV VSC5605EV 1956
+nt98700dk MACH_NT98700DK NT98700DK 1957
+icontact MACH_ICONTACT ICONTACT 1958
+swarco_frcpu MACH_SWARCO_FRCPU SWARCO_FRCPU 1959
+swarco_scpu MACH_SWARCO_SCPU SWARCO_SCPU 1960
+bbox_p16 MACH_BBOX_P16 BBOX_P16 1961
+bstd MACH_BSTD BSTD 1962
+sbc2440ii MACH_SBC2440II SBC2440II 1963
+pcm034 MACH_PCM034 PCM034 1964
+neso MACH_NESO NESO 1965
+wlnx_9g20 MACH_WLNX_9G20 WLNX_9G20 1966
+omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967
+totemnova MACH_TOTEMNOVA TOTEMNOVA 1968
+c5000 MACH_C5000 C5000 1969
+unipo_at91sam9263 MACH_UNIPO_AT91SAM9263 UNIPO_AT91SAM9263 1970
+ethernut5 MACH_ETHERNUT5 ETHERNUT5 1971
+arm11 MACH_ARM11 ARM11 1972
+cpuat9260 MACH_CPUAT9260 CPUAT9260 1973
+cpupxa255 MACH_CPUPXA255 CPUPXA255 1974
+cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
+cheflux MACH_CHEFLUX CHEFLUX 1976
+eb_cpux9k2 MACH_EB_CPUX9K2 EB_CPUX9K2 1977
+opcotec MACH_OPCOTEC OPCOTEC 1978
+yt MACH_YT YT 1979
+motoq MACH_MOTOQ MOTOQ 1980
+bsb1 MACH_BSB1 BSB1 1981
+acs5k MACH_ACS5K ACS5K 1982
+milan MACH_MILAN MILAN 1983
+quartzv2 MACH_QUARTZV2 QUARTZV2 1984
+rsvp MACH_RSVP RSVP 1985
+rmp200 MACH_RMP200 RMP200 1986
+snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987
+dsm320 MACH_DSM320 DSM320 1988
+adsgcm MACH_ADSGCM ADSGCM 1989
+ase2_400 MACH_ASE2_400 ASE2_400 1990
+pizza MACH_PIZZA PIZZA 1991
+spot_ngpl MACH_SPOT_NGPL SPOT_NGPL 1992
+armata MACH_ARMATA ARMATA 1993
+exeda MACH_EXEDA EXEDA 1994
+mx31sf005 MACH_MX31SF005 MX31SF005 1995
+f5d8231_4_v2 MACH_F5D8231_4_V2 F5D8231_4_V2 1996
+q2440 MACH_Q2440 Q2440 1997
+qq2440 MACH_QQ2440 QQ2440 1998
+mini2440 MACH_MINI2440 MINI2440 1999
+colibri300 MACH_COLIBRI300 COLIBRI300 2000
+jades MACH_JADES JADES 2001
+spark MACH_SPARK SPARK 2002
+benzina MACH_BENZINA BENZINA 2003
+blaze MACH_BLAZE BLAZE 2004
+linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005
+htcvenus MACH_HTCVENUS HTCVENUS 2006
VFPFSTMIA r4, r5 @ save the working registers
VFPFMRX r5, FPSCR @ current status
tst r1, #FPEXC_EX @ is there additional state to save?
- VFPFMRX r6, FPINST, NE @ FPINST (only if FPEXC.EX is set)
- tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read?
- VFPFMRX r8, FPINST2, NE @ FPINST2 if needed (and present)
+ beq 1f
+ VFPFMRX r6, FPINST @ FPINST (only if FPEXC.EX is set)
+ tst r1, #FPEXC_FP2V @ is there an FPINST2 to read?
+ beq 1f
+ VFPFMRX r8, FPINST2 @ FPINST2 if needed (and present)
+1:
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
@ and point r4 at the word at the
@ start of the register dump
@ FPEXC is in a safe state
ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2
tst r1, #FPEXC_EX @ is there additional state to restore?
- VFPFMXR FPINST, r6, NE @ restore FPINST (only if FPEXC.EX is set)
- tstne r1, #FPEXC_FP2V @ is there an FPINST2 to write?
- VFPFMXR FPINST2, r8, NE @ FPINST2 if needed (and present)
+ beq 1f
+ VFPFMXR FPINST, r6 @ restore FPINST (only if FPEXC.EX is set)
+ tst r1, #FPEXC_FP2V @ is there an FPINST2 to write?
+ beq 1f
+ VFPFMXR FPINST2, r8 @ FPINST2 if needed (and present)
+1:
VFPFMXR FPSCR, r5 @ restore status
check_for_exception:
VFPFSTMIA r0, r2 @ save the working registers
VFPFMRX r2, FPSCR @ current status
tst r1, #FPEXC_EX @ is there additional state to save?
- VFPFMRX r3, FPINST, NE @ FPINST (only if FPEXC.EX is set)
- tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read?
- VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present)
+ beq 1f
+ VFPFMRX r3, FPINST @ FPINST (only if FPEXC.EX is set)
+ tst r1, #FPEXC_FP2V @ is there an FPINST2 to read?
+ beq 1f
+ VFPFMRX r12, FPINST2 @ FPINST2 if needed (and present)
+1:
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
ENDPROC(vfp_save_state)
* in place; report VFP support to userspace.
*/
elf_hwcap |= HWCAP_VFP;
+#ifdef CONFIG_NEON
+ /*
+ * Check for the presence of the Advanced SIMD
+ * load/store instructions, integer and single
+ * precision floating point operations.
+ */
+ if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
+ elf_hwcap |= HWCAP_NEON;
+#endif
}
return 0;
}
int error = -EBADF;
struct file * file = NULL;
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(fd);
- if (!file)
- goto out;
- }
-
/* As with sparc32, make sure the shift for mmap2 is constant
(12), no matter what PAGE_SIZE we have.... */
/* But unlike sparc32, don't just silently break if we're
trying to map something we can't */
- if (pgoff & ((1<<(PAGE_SHIFT-12))-1))
+ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
return -EINVAL;
+ pgoff >>= PAGE_SHIFT - 12;
- pgoff >>= (PAGE_SHIFT - 12);
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
down_write(¤t->mm->mmap_sem);
error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
#define arch_has_block_step() (1)
extern void user_enable_block_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* !__KERNEL__ */
/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
* sn_pci_controller_fixup() - This routine sets up a bus's resources
* consistent with the Linux PCI abstraction layer.
*/
-static void
+static void __init
sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
{
s64 status = 0;
/*
* References to members of the boot_cpu_data structure.
*/
- .text
+.section .text.head, "ax"
.global start_kernel
.global __bss_start
.global _end
/*
* AP startup routine
*/
- .text
.global eit_vector
ENTRY(startup_AP)
;; setup EVB
nop
#endif /* CONFIG_SMP */
+ .text
ENTRY(stack_start)
.long init_thread_union+8192
.long __KERNEL_DS
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#include <asm/break.h>
-#define BUG() \
-do { \
- __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
-} while (0)
+static inline void __noreturn BUG(void)
+{
+ __asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+ /* Fool GCC into thinking the function doesn't return. */
+ while (1)
+ ;
+}
#define HAVE_ARCH_BUG
#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
-#define BUG_ON(condition) \
-do { \
- __asm__ __volatile__("tne $0, %0, %1" \
- : : "r" (condition), "i" (BRK_BUG)); \
-} while (0)
+static inline void __BUG_ON(unsigned long condition)
+{
+ if (__builtin_constant_p(condition)) {
+ if (condition)
+ BUG();
+ else
+ return;
+ }
+ __asm__ __volatile__("tne $0, %0, %1"
+ : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
#define HAVE_ARCH_BUG_ON
#ifndef _ASM_PTRACE_H
#define _ASM_PTRACE_H
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
} else {
switch (cur) {
/* Bxx (d8,PC) */
- case 0xc0:
- case 0xc1:
- case 0xc2:
- case 0xc3:
- case 0xc4:
- case 0xc5:
- case 0xc6:
- case 0xc7:
- case 0xc8:
- case 0xc9:
- case 0xca:
+ case 0xc0 ... 0xca:
if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
goto fault;
if (!__gdbstub_mark_bp(pc + 2, 0))
break;
/* LXX (d8,PC) */
- case 0xd0:
- case 0xd1:
- case 0xd2:
- case 0xd3:
- case 0xd4:
- case 0xd5:
- case 0xd6:
- case 0xd7:
- case 0xd8:
- case 0xd9:
- case 0xda:
+ case 0xd0 ... 0xda:
if (!__gdbstub_mark_bp(pc + 1, 0))
goto fault;
if (regs->pc != regs->lar &&
#define to_parisc_driver(d) container_of(d, struct parisc_driver, drv)
#define parisc_parent(d) to_parisc_device(d->dev.parent)
-static inline char *parisc_pathname(struct parisc_device *d)
+static inline const char *parisc_pathname(struct parisc_device *d)
{
- return d->dev.bus_id;
+ return dev_name(&d->dev);
}
static inline void
typedef unsigned long __kernel_size_t;
typedef long __kernel_ssize_t;
typedef long __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#else
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#endif
+typedef long __kernel_time_t;
typedef char * __kernel_caddr_t;
typedef unsigned short __kernel_uid16_t;
#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
struct task_struct;
#define arch_has_single_step() 1
void user_disable_single_step(struct task_struct *task);
EXPORT_SYMBOL(hppa_dma_ops);
static struct device root = {
- .bus_id = "parisc",
+ .init_name = "parisc",
};
static inline int check_dev(struct device *dev)
static void setup_bus_id(struct parisc_device *padev)
{
struct hardware_path path;
- char *output = padev->dev.bus_id;
+ char name[20];
+ char *output = name;
int i;
get_node_path(padev->dev.parent, &path);
output += sprintf(output, "%u:", (unsigned char) path.bc[i]);
}
sprintf(output, "%u", (unsigned char) padev->hw_path);
+ dev_set_name(&padev->dev, name);
}
struct parisc_device * create_tree_node(char id, struct device *parent)
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/console.h>
-#include <linux/kallsyms.h>
#include <linux/bug.h>
#include <asm/assembly.h>
DEFINE_SPINLOCK(pa_dbit_lock);
#endif
-void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs);
static int printbinary(char *buf, unsigned long x, int nbits)
void show_regs(struct pt_regs *regs)
{
- int i;
+ int i, user;
char *level;
unsigned long cr30, cr31;
- level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
+ user = user_mode(regs);
+ level = user ? KERN_DEBUG : KERN_CRIT;
print_gr(level, regs);
for (i = 0; i < 8; i += 4)
PRINTREGS(level, regs->sr, "sr", RFMT, i);
- if (user_mode(regs))
+ if (user)
print_fr(level, regs);
cr30 = mfctl(30);
printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n",
level, current_thread_info()->cpu, cr30, cr31);
printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
- printk(level);
- print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]);
- printk(level);
- print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
- printk(level);
- print_symbol(" RP(r2): %s\n", regs->gr[2]);
-
- parisc_show_stack(current, NULL, regs);
+
+ if (user) {
+ printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
+ printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
+ printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
+ } else {
+ printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
+ printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
+ printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
+
+ parisc_show_stack(current, NULL, regs);
+ }
}
break;
if (__kernel_text_address(info->ip)) {
- printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
-#ifdef CONFIG_KALLSYMS
- print_symbol("%s\n", info->ip);
-#else
- if ((i & 0x03) == 0)
- printk("\n");
-#endif
+ printk(KERN_CRIT " [<" RFMT ">] %pS\n",
+ info->ip, (void *) info->ip);
i++;
}
}
- printk("\n");
+ printk(KERN_CRIT "\n");
}
-void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs)
{
struct unwind_frame_info info;
#size-cells = <1>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
+ ethernet0 = &enet1;
+ ethernet1 = &enet0;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
+ cache-size = <0x100000>; // L2, 1M
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:49:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_XILINX_VIRTEX=y
+# CONFIG_ACADIA is not set
+# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:20:16 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:31:16 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_XILINX_VIRTEX=y
CONFIG_XILINX_VIRTEX_5_FXT=y
# CONFIG_IPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
+CONFIG_OF_GPIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
#
-# I2C system bus drivers (mostly embedded / system-on-chip)
+# Memory mapped GPIO expanders:
#
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
+CONFIG_GPIO_XILINX=y
#
-# External I2C/SMBus adapter drivers
+# I2C GPIO expanders:
#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
+# PCI GPIO expanders:
#
-# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_GPIO_BT8XX is not set
#
-# Other I2C/SMBus bus drivers
+# SPI GPIO expanders:
#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_XILINX=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:11:37 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:12:40 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:56 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:10:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:22 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:11:02 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_MPC5200_WDT is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:13:19 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:13:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:39 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:30 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 18 14:19:54 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:07 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
-CONFIG_PPC_MPC5200=y
-CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MPC5200_BUGFIX=y
+# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
+CONFIG_SUSPEND_FREEZER=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Input device support
#
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_WATCHDOG_RTAS is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# Graphics support
#
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
-#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_APPLE is not set
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+# CONFIG_HID_CHICONY is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS is not set
#
# LED drivers
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:56:44 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 09:54:44 2008
#
# CONFIG_PPC64 is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
#
# I2C GPIO expanders:
#
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:28:58 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:06:19 2008
#
# CONFIG_PPC64 is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
-extern void set_huge_psize(int psize);
extern void add_gpage(unsigned long addr, unsigned long page_size,
unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
#ifdef __powerpc64__
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */
#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */
#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265)
blr
_GLOBAL(__setup_cpu_460ex)
_GLOBAL(__setup_cpu_460gt)
- b __init_fpu_44x
+ mflr r4
+ bl __init_fpu_44x
+ bl __fixup_440A_mcheck
+ mtlr r4
+ blr
+
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
- crclr so
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
ACCOUNT_CPU_USER_ENTRY(r10, r11)
+ /*
+ * This "crclr so" clears CR0.SO, which is the error indication on
+ * return from this system call. There must be no cmp instruction
+ * between it and the "mfcr r9" below, otherwise if XER.SO is set,
+ * CR0.SO will get set, causing all system calls to appear to fail.
+ */
+ crclr so
std r2,GPR2(r1)
std r3,GPR3(r1)
std r4,GPR4(r1)
* parsing
*/
dn = pci_device_to_OF_node(pdev);
- if (dn)
- return of_irq_map_one(dn, 0, out_irq);
+ if (dn) {
+ rc = of_irq_map_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
/* Ok, we don't, time to have fun. Let's start by building up an
* interrupt spec. we assume #interrupt-cells is 1, which is standard
BUG_ON(!c->hotpluggable);
+#ifdef CONFIG_PPC64
if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
cpu_has_feature(CPU_FTR_SMT))
sysdev_remove_file(s, &attr_smt_snooze_delay);
+#endif
/* PMC stuff */
switch (cur_cpu_spec->pmc_type) {
unsigned long __init mmu_mapin_ram(void)
{
- unsigned long v, s;
+ unsigned long v, s, mapped;
phys_addr_t p;
v = KERNELBASE;
s -= LARGE_PAGE_SIZE_4M;
}
- return total_lowmem - s;
+ mapped = total_lowmem - s;
+
+ /* If the size of RAM is not an exact power of two, we may not
+ * have covered RAM in its entirety with 16 and 4 MiB
+ * pages. Consequently, restrict the top end of RAM currently
+ * allocable so that calls to the LMB to allocate PTEs for "tail"
+ * coverage with normal-sized pages (or other reasons) do not
+ * attempt to allocate outside the allowed range.
+ */
+
+ __initial_memory_limit_addr = memstart_addr + mapped;
+
+ return mapped;
}
return err;
}
-void set_huge_psize(int psize)
+static void __init set_huge_psize(int psize)
{
/* Check that it is a page size supported by the hardware and
* that it fits within pagetable limits. */
.priority = 1 /* Must run before sched domains notifier. */
};
+static void mark_reserved_regions_for_nid(int nid)
+{
+ struct pglist_data *node = NODE_DATA(nid);
+ int i;
+
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ unsigned long physbase = lmb.reserved.region[i].base;
+ unsigned long size = lmb.reserved.region[i].size;
+ unsigned long start_pfn = physbase >> PAGE_SHIFT;
+ unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+ struct node_active_region node_ar;
+ unsigned long node_end_pfn = node->node_start_pfn +
+ node->node_spanned_pages;
+
+ /*
+ * Check to make sure that this lmb.reserved area is
+ * within the bounds of the node that we care about.
+ * Checking the nid of the start and end points is not
+ * sufficient because the reserved area could span the
+ * entire node.
+ */
+ if (end_pfn <= node->node_start_pfn ||
+ start_pfn >= node_end_pfn)
+ continue;
+
+ get_node_active_region(start_pfn, &node_ar);
+ while (start_pfn < end_pfn &&
+ node_ar.start_pfn < node_ar.end_pfn) {
+ unsigned long reserve_size = size;
+ /*
+ * if reserved region extends past active region
+ * then trim size to active region
+ */
+ if (end_pfn > node_ar.end_pfn)
+ reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
+ - (start_pfn << PAGE_SHIFT);
+ dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
+ reserve_size, node_ar.nid);
+ reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
+ reserve_size, BOOTMEM_DEFAULT);
+ /*
+ * if reserved region is contained in the active region
+ * then done.
+ */
+ if (end_pfn <= node_ar.end_pfn)
+ break;
+
+ /*
+ * reserved region extends past the active region
+ * get next active region that contains this
+ * reserved region
+ */
+ start_pfn = node_ar.end_pfn;
+ physbase = start_pfn << PAGE_SHIFT;
+ size = size - reserve_size;
+ get_node_active_region(start_pfn, &node_ar);
+ }
+ }
+}
+
+
void __init do_init_bootmem(void)
{
int nid;
get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
- /* Allocate the node structure node local if possible */
+ /*
+ * Allocate the node structure node local if possible
+ *
+ * Be careful moving this around, as it relies on all
+ * previous nodes' bootmem to be initialized and have
+ * all reserved areas marked.
+ */
NODE_DATA(nid) = careful_allocation(nid,
sizeof(struct pglist_data),
SMP_CACHE_BYTES, end_pfn);
start_pfn, end_pfn);
free_bootmem_with_active_regions(nid, end_pfn);
- }
-
- /* Mark reserved regions */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long physbase = lmb.reserved.region[i].base;
- unsigned long size = lmb.reserved.region[i].size;
- unsigned long start_pfn = physbase >> PAGE_SHIFT;
- unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
- struct node_active_region node_ar;
-
- get_node_active_region(start_pfn, &node_ar);
- while (start_pfn < end_pfn &&
- node_ar.start_pfn < node_ar.end_pfn) {
- unsigned long reserve_size = size;
- /*
- * if reserved region extends past active region
- * then trim size to active region
- */
- if (end_pfn > node_ar.end_pfn)
- reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- - (start_pfn << PAGE_SHIFT);
- dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
- reserve_size, node_ar.nid);
- reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
- reserve_size, BOOTMEM_DEFAULT);
- /*
- * if reserved region is contained in the active region
- * then done.
- */
- if (end_pfn <= node_ar.end_pfn)
- break;
-
- /*
- * reserved region extends past the active region
- * get next active region that contains this
- * reserved region
- */
- start_pfn = node_ar.end_pfn;
- physbase = start_pfn << PAGE_SHIFT;
- size = size - reserve_size;
- get_node_active_region(start_pfn, &node_ar);
- }
-
- }
-
- for_each_online_node(nid)
+ /*
+ * Be very careful about moving this around. Future
+ * calls to careful_allocation() depend on this getting
+ * done correctly.
+ */
+ mark_reserved_regions_for_nid(nid);
sparse_memory_present_with_active_regions(nid);
+ }
}
void __init paging_init(void)
struct axon_msic *msic = get_irq_data(irq);
u32 write_offset, msi;
int idx;
+ int retry = 0;
write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
/* write_offset doesn't wrap properly, so we have to mask it */
write_offset &= MSIC_FIFO_SIZE_MASK;
- while (msic->read_offset != write_offset) {
+ while (msic->read_offset != write_offset && retry < 100) {
idx = msic->read_offset / sizeof(__le32);
msi = le32_to_cpu(msic->fifo_virt[idx]);
msi &= 0xFFFF;
pr_debug("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
+ if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
+ generic_handle_irq(msi);
+ msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
+ } else {
+ /*
+ * Reading the MSIC_WRITE_OFFSET_REG does not
+ * reliably flush the outstanding DMA to the
+ * FIFO buffer. Here we were reading stale
+ * data, so we need to retry.
+ */
+ udelay(1);
+ retry++;
+ pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ continue;
+ }
+
+ if (retry) {
+ pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+ msi, retry);
+ retry = 0;
+ }
+
msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
msic->read_offset &= MSIC_FIFO_SIZE_MASK;
+ }
- if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host)
- generic_handle_irq(msi);
- else
- pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ if (retry) {
+ printk(KERN_WARNING "axon_msi: irq timed out\n");
+
+ msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
+ msic->read_offset &= MSIC_FIFO_SIZE_MASK;
}
desc->chip->eoi(irq);
dn->full_name);
goto out_free_fifo;
}
+ memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
NR_IRQS, &msic_host_ops, 0);
return cpus_weight(cpu_possible_map);
}
-static void __devinit smp_iic_setup_cpu(int cpu)
+static void __devinit smp_cell_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
iic_setup_cpu();
+
+ /*
+ * change default DABRX to allow user watchpoints
+ */
+ mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
static DEFINE_SPINLOCK(timebase_lock);
.message_pass = smp_iic_message_pass,
.probe = smp_iic_probe,
.kick_cpu = smp_cell_kick_cpu,
- .setup_cpu = smp_iic_setup_cpu,
+ .setup_cpu = smp_cell_setup_cpu,
.cpu_bootable = smp_cell_cpu_bootable,
};
if (offset >= ps_size)
return VM_FAULT_SIGBUS;
+ if (fatal_signal_pending(current))
+ return VM_FAULT_SIGBUS;
+
/*
* Because we release the mmap_sem, the context may be destroyed while
* we're in spu_wait. Grab an extra reference so it isn't destroyed
answer Y or M. Otherwise say N.
config PPC_BESTCOMM_ATA
- tristate "Bestcomm ATA task support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the ATA task.
config PPC_BESTCOMM_FEC
- tristate "Bestcomm FEC tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the FEC tasks.
config PPC_BESTCOMM_GEN_BD
- tristate "Bestcomm GenBD tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the GenBD tasks.
void __init mpic_init(struct mpic *mpic)
{
int i;
+ int cpu;
BUG_ON(mpic->num_sources == 0);
mpic_pasemi_msi_init(mpic);
+ if (mpic->flags & MPIC_PRIMARY)
+ cpu = hard_smp_processor_id();
+ else
+ cpu = 0;
+
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
u32 vecpri = MPIC_VECPRI_MASK | i |
continue;
/* init hw */
mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
- mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
- 1 << hard_smp_processor_id());
+ mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
}
/* Init spurious vector */
}
regs = ioremap(res.start, 32);
- printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
- res.start, regs);
+ printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+ (unsigned long long) res.start, regs);
/* Setup interrupt controller */
out_be32(regs + XINTC_IER, 0); /* disable all irqs */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 19:43:29 2008
+# Linux kernel version: 2.6.28-rc6
+# Thu Nov 27 11:00:49 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_GROUP_SCHED=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Base setup
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# I/O subsystem configuration
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_IUCV=m
+CONFIG_IUCV=y
CONFIG_AFIUCV=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_PCMCIA is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
#
# SCSI device support
CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
+# CONFIG_REGULATOR is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_ZCRYPT=m
# CONFIG_ZCRYPT_MONOLITHIC is not set
# Library routines
#
CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
- if (mm->context.has_pgste)
- ptep_rcp_copy(ptep);
pte_val(*ptep) = _PAGE_TYPE_EMPTY;
if (mm->context.noexec)
pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
psw_t psw;
unsigned long gprs[NUM_GPRS];
unsigned long orig_gpr2;
+ unsigned short svcnr;
unsigned short ilc;
- unsigned short trap;
};
#endif
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
#define user_stack_pointer(regs)((regs)->gprs[15])
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
- if (regs->trap != __LC_SVC_OLD_PSW)
- return -1;
- return regs->gprs[2];
+ return regs->svcnr ? regs->svcnr : -1;
}
static inline void syscall_rollback(struct task_struct *task,
unsigned int i, unsigned int n,
unsigned long *args)
{
+ unsigned long mask = -1UL;
+
BUG_ON(i + n > 6);
#ifdef CONFIG_COMPAT
- if (test_tsk_thread_flag(task, TIF_31BIT)) {
- if (i + n == 6)
- args[--n] = (u32) regs->args[0];
- while (n-- > 0)
- args[n] = (u32) regs->gprs[2 + i + n];
- }
+ if (test_tsk_thread_flag(task, TIF_31BIT))
+ mask = 0xffffffff;
#endif
if (i + n == 6)
- args[--n] = regs->args[0];
- memcpy(args, ®s->gprs[2 + i], n * sizeof(args[0]));
+ args[--n] = regs->args[0] & mask;
+ while (n-- > 0)
+ if (i + n > 0)
+ args[n] = regs->gprs[2 + i + n] & mask;
+ if (i == 0)
+ args[0] = regs->orig_gpr2 & mask;
}
static inline void syscall_set_arguments(struct task_struct *task,
BUG_ON(i + n > 6);
if (i + n == 6)
regs->args[0] = args[--n];
- memcpy(®s->gprs[2 + i], args, n * sizeof(args[0]));
+ while (n-- > 0)
+ if (i + n > 0)
+ regs->gprs[2 + i + n] = args[n];
+ if (i == 0)
+ regs->orig_gpr2 = args[0];
}
#endif /* _ASM_SYSCALL_H */
DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs));
DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2));
DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc));
- DEFINE(__PT_TRAP, offsetof(struct pt_regs, trap));
+ DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr));
DEFINE(__PT_SIZE, sizeof(struct pt_regs));
BLANK();
DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain));
return err;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
.macro CREATE_STACK_FRAME psworg,savearea
s %r15,BASED(.Lc_spsize) # make room for registers & psw
mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(16,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
st %r12,__SF_BACKCHAIN(%r15) # clear back chain
#endif
sysc_do_svc:
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- sla %r7,2 # *4 and test for svc 0
+ ltr %r7,%r7 # test for svc 0
bnz BASED(sysc_nr_ok) # svc number > 0
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
bnl BASED(sysc_nr_ok)
lr %r7,%r1 # copy svc number to %r7
- sla %r7,2 # *4
sysc_nr_ok:
mvc SP_ARGS(4,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sll %r7,2 # svc number *4
l %r8,BASED(.Lsysc_table)
tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
l %r8,0(%r7,%r8) # get system call addr.
sysc_restart:
ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
l %r7,SP_R2(%r15) # load new svc number
- sla %r7,2
mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument
lm %r2,%r6,SP_R2(%r15) # load svc arguments
b BASED(sysc_do_restart) # restart svc
#
sysc_singlestep:
ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_return) # load adr. of system return
bnl BASED(sysc_tracenogo)
l %r8,BASED(.Lsysc_table)
lr %r7,%r2
- sll %r7,2 # *4
+ sll %r7,2 # svc number *4
l %r8,0(%r7,%r8)
sysc_tracego:
lm %r3,%r6,SP_R3(%r15)
# per was called from kernel, must be kprobes
#
kernel_per:
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_restore)# load adr. of system return
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
.macro CREATE_STACK_FRAME psworg,savearea
aghi %r15,-SP_SIZE # make room for registers & psw
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
stg %r12,__SF_BACKCHAIN(%r15)
#endif
sysc_do_svc:
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- slag %r7,%r7,2 # *4 and test for svc 0
+ ltgr %r7,%r7 # test for svc 0
jnz sysc_nr_ok
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
jnl sysc_nr_ok
lgfr %r7,%r1 # clear high word in r1
- slag %r7,%r7,2 # svc 0: system call number in %r1
sysc_nr_ok:
mvc SP_ARGS(8,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sllg %r7,%r7,2 # svc number * 4
larl %r10,sys_call_table
#ifdef CONFIG_COMPAT
tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ?
sysc_restart:
ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
lg %r7,SP_R2(%r15) # load new svc number
- slag %r7,%r7,2 # *4
mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
lmg %r2,%r6,SP_R2(%r15) # load svc arguments
j sysc_do_restart # restart svc
# _TIF_SINGLE_STEP is set, call do_single_step
#
sysc_singlestep:
- ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return # load adr. of system return
jg do_single_step # branch to do_sigtrap
lghi %r0,NR_syscalls
clgr %r0,%r2
jnh sysc_tracenogo
- slag %r7,%r2,2 # *4
+ sllg %r7,%r2,2 # svc number *4
lgf %r8,0(%r7,%r10)
sysc_tracego:
lmg %r3,%r6,SP_R3(%r15)
# per was called from kernel, must be kprobes
#
kernel_per:
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_restore # load adr. of system ret, no work
jg do_single_step # branch to do_single_step
/*
* Initial thread structure.
*
- * We need to make sure that this is 8192-byte aligned due to the
+ * We need to make sure that this is THREAD_SIZE aligned due to the
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
* debugger stored an invalid system call number. Skip
* the system call and the system call restart handling.
*/
- regs->trap = -1;
+ regs->svcnr = 0;
ret = -1;
}
current->thread.fp_regs.fpc &= FPC_VALID_MASK;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
oldset = ¤t->blocked;
/* Are we from a system call? */
- if (regs->trap == __LC_SVC_OLD_PSW) {
+ if (regs->svcnr) {
continue_addr = regs->psw.addr;
restart_addr = continue_addr - regs->ilc;
retval = regs->gprs[2];
case -ERESTART_RESTARTBLOCK:
regs->gprs[2] = -EINTR;
}
- regs->trap = -1; /* Don't deal with this again. */
+ regs->svcnr = 0; /* Don't deal with this again. */
}
/* Get signal to deliver. When running under ptrace, at this point
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 jiffies_timer_cc;
+static u64 sched_clock_base_cc;
static DEFINE_PER_CPU(struct clock_event_device, comparators);
*/
unsigned long long sched_clock(void)
{
- return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9;
+ return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
}
/*
*/
void __init time_init(void)
{
- u64 init_timer_cc;
-
- init_timer_cc = reset_tod_clock();
- jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
+ sched_clock_base_cc = reset_tod_clock();
/* set xtime */
- tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime);
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
delta = -delta;
adjust.offset = -ticks * (1000000 / HZ);
}
- jiffies_timer_cc += delta;
+ sched_clock_base_cc += delta;
if (adjust.offset != 0) {
printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
adjust.offset);
* Written by Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
+#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
}
_edata = .; /* End of data section */
- . = ALIGN(2 * PAGE_SIZE); /* init_task */
+ . = ALIGN(THREAD_SIZE); /* init_task */
.data.init_task : {
*(.data.init_task)
}
};
extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define force_successful_syscall_return() \
do { current_thread_info()->syscall_noerror = 1; \
} while (0)
unsigned int fsr_storage;
-void __init cpu_probe(void)
+void __cpuinit cpu_probe(void)
{
int psr_impl, psr_vers, fpu_vers;
int i, psr;
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .text
+ .section .text.head,"ax"
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
#include "irq.h"
-volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
+volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
unsigned char boot_cpu_id = 0;
unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
panic("SMP bolixed\n");
}
-struct linux_prom_registers smp_penguin_ctable __initdata = { 0 };
+struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 };
void smp_send_reschedule(int cpu)
{
"i" (ASI_M_CTL));
}
-void __init smp4d_callin(void)
+void __cpuinit smp4d_callin(void)
{
int cpuid = hard_smp4d_processor_id();
extern spinlock_t sun4d_imsk_lock;
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = hard_smp4d_processor_id();
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = smp_processor_id();
.globl sun4m_cpu_startup, __smp4m_processor_id
.globl sun4d_cpu_startup, __smp4d_processor_id
- __INIT
+ __CPUINIT
.align 4
/* When we start up a cpu for the first time it enters this routine.
/* CPUID in bootbus can be found at PA 0xff0140000 */
#define SUN4D_BOOTBUS_CPUID 0xf0140000
- __INIT
+ __CPUINIT
.align 4
sun4d_cpu_startup:
.text 0xf0004000 :
{
_text = .;
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
/* Paging initialization on the Sparc Reference MMU. */
extern void sparc_context_init(int);
-void (*poke_srmmu)(void) __initdata = NULL;
+void (*poke_srmmu)(void) __cpuinitdata = NULL;
extern unsigned long bootmem_init(unsigned long *pages_avail);
(int)vac_cache_size, (int)vac_line_size);
}
-static void __init poke_hypersparc(void)
+static void __cpuinit poke_hypersparc(void)
{
volatile unsigned long clear;
unsigned long mreg = srmmu_get_mmureg();
hypersparc_setup_blockops();
}
-static void __init poke_cypress(void)
+static void __cpuinit poke_cypress(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long faddr, tagval;
init_cypress_common();
}
-static void __init poke_swift(void)
+static void __cpuinit poke_swift(void)
{
unsigned long mreg;
}
-static void __init poke_turbosparc(void)
+static void __cpuinit poke_turbosparc(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long ccreg;
poke_srmmu = poke_turbosparc;
}
-static void __init poke_tsunami(void)
+static void __cpuinit poke_tsunami(void)
{
unsigned long mreg = srmmu_get_mmureg();
tsunami_setup_blockops();
}
-static void __init poke_viking(void)
+static void __cpuinit poke_viking(void)
{
unsigned long mreg = srmmu_get_mmureg();
static int smp_catch;
return kern_base + (val - KERNBASE);
}
-static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
{
extern unsigned long sparc64_ttable_tl0;
extern unsigned long kern_locked_tte_data;
*/
static struct thread_info *cpu_new_thread = NULL;
-static int __devinit smp_boot_one_cpu(unsigned int cpu)
+static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
{
struct trap_per_cpu *tb = &trap_block[cpu];
unsigned long entry =
return nid;
}
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
{
int i;
{
u8 pending;
asm volatile("int $0x16; setnz %0"
- : "=rm" (pending)
+ : "=qm" (pending)
: "a" (0x0100));
return pending;
}
#ifndef _ASM_X86_DS_H
#define _ASM_X86_DS_H
-#ifdef CONFIG_X86_DS
#include <linux/types.h>
#include <linux/init.h>
+#ifdef CONFIG_X86_DS
+
struct task_struct;
/*
#else /* CONFIG_X86_DS */
-#define ds_init_intel(config) do {} while (0)
+struct cpuinfo_x86;
+static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {}
#endif /* CONFIG_X86_DS */
#endif /* _ASM_X86_DS_H */
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-#else
-/* No IOMMU */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
-#endif
-
#endif /* __KERNEL__ */
#endif /* _ASM_X86_PCI_64_H */
extern int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *info, int can_allocate);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
obj-y += process.o
obj-y += i387.o xsave.o
obj-y += ptrace.o
-obj-y += ds.o
+obj-$(CONFIG_X86_DS) += ds.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-y += step.o
}
}
-void enable_IR_x2apic(void)
+void __init enable_IR_x2apic(void)
{
#ifdef CONFIG_INTR_REMAP
int ret;
u32 i = 0;
if (cpu_family == CPU_HW_PSTATE) {
- rdmsr(MSR_PSTATE_STATUS, lo, hi);
- i = lo & HW_PSTATE_MASK;
- data->currpstate = i;
+ if (data->currpstate == HW_PSTATE_INVALID) {
+ /* read (initial) hw pstate if not yet set */
+ rdmsr(MSR_PSTATE_STATUS, lo, hi);
+ i = lo & HW_PSTATE_MASK;
+
+ /*
+ * a workaround for family 11h erratum 311 might cause
+ * an "out-of-range Pstate if the core is in Pstate-0
+ */
+ if (i >= data->numps)
+ data->currpstate = HW_PSTATE_0;
+ else
+ data->currpstate = i;
+ }
return 0;
}
do {
}
data->cpu = pol->cpu;
+ data->currpstate = HW_PSTATE_INVALID;
if (powernow_k8_cpu_init_acpi(data)) {
/*
* http://www.gnu.org/licenses/gpl.html
*/
+
+enum pstate {
+ HW_PSTATE_INVALID = 0xff,
+ HW_PSTATE_0 = 0,
+ HW_PSTATE_1 = 1,
+ HW_PSTATE_2 = 2,
+ HW_PSTATE_3 = 3,
+ HW_PSTATE_4 = 4,
+ HW_PSTATE_5 = 5,
+ HW_PSTATE_6 = 6,
+ HW_PSTATE_7 = 7,
+};
+
struct powernow_k8_data {
unsigned int cpu;
u32 exttype; /* extended interface = 1 */
/* keep track of the current fid / vid or pstate */
- u32 currvid, currfid, currpstate;
+ u32 currvid;
+ u32 currfid;
+ enum pstate currpstate;
/* the powernow_table includes all frequency and vid/fid pairings:
* fid are the lower 8 bits of the index, vid are the upper 8 bits.
*/
-#ifdef CONFIG_X86_DS
-
#include <asm/ds.h>
#include <linux/errno.h>
static inline struct ds_context *ds_get_context(struct task_struct *task)
{
struct ds_context *context;
+ unsigned long irq;
- spin_lock(&ds_lock);
+ spin_lock_irqsave(&ds_lock, irq);
context = (task ? task->thread.ds_ctx : this_system_context);
if (context)
context->count++;
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
return context;
}
/*
* Same as ds_get_context, but allocates the context and it's DS
* structure, if necessary; returns NULL; if out of memory.
- *
- * pre: requires ds_lock to be held
*/
static inline struct ds_context *ds_alloc_context(struct task_struct *task)
{
struct ds_context **p_context =
(task ? &task->thread.ds_ctx : &this_system_context);
struct ds_context *context = *p_context;
+ unsigned long irq;
if (!context) {
- spin_unlock(&ds_lock);
-
context = kzalloc(sizeof(*context), GFP_KERNEL);
-
- if (!context) {
- spin_lock(&ds_lock);
+ if (!context)
return NULL;
- }
context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
if (!context->ds) {
kfree(context);
- spin_lock(&ds_lock);
return NULL;
}
- spin_lock(&ds_lock);
- /*
- * Check for race - another CPU could have allocated
- * it meanwhile:
- */
+ spin_lock_irqsave(&ds_lock, irq);
+
if (*p_context) {
kfree(context->ds);
kfree(context);
- return *p_context;
- }
- *p_context = context;
+ context = *p_context;
+ } else {
+ *p_context = context;
- context->this = p_context;
- context->task = task;
+ context->this = p_context;
+ context->task = task;
- if (task)
- set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
+ if (task)
+ set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
- if (!task || (task == current))
- wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0);
-
- get_tracer(task);
+ if (!task || (task == current))
+ wrmsrl(MSR_IA32_DS_AREA,
+ (unsigned long)context->ds);
+ }
+ spin_unlock_irqrestore(&ds_lock, irq);
}
context->count++;
*/
static inline void ds_put_context(struct ds_context *context)
{
+ unsigned long irq;
+
if (!context)
return;
- spin_lock(&ds_lock);
+ spin_lock_irqsave(&ds_lock, irq);
if (--context->count)
goto out;
kfree(context->ds);
kfree(context);
out:
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
}
struct ds_context *context;
unsigned long buffer, adj;
const unsigned long alignment = (1 << 3);
+ unsigned long irq;
int error = 0;
if (!ds_cfg.sizeof_ds)
return -EOPNOTSUPP;
- spin_lock(&ds_lock);
-
- error = -ENOMEM;
context = ds_alloc_context(task);
if (!context)
- goto out_unlock;
+ return -ENOMEM;
+
+ spin_lock_irqsave(&ds_lock, irq);
error = -EPERM;
if (!check_tracer(task))
goto out_unlock;
+ get_tracer(task);
+
error = -EALREADY;
if (context->owner[qual] == current)
- goto out_unlock;
+ goto out_put_tracer;
error = -EPERM;
if (context->owner[qual] != NULL)
- goto out_unlock;
+ goto out_put_tracer;
context->owner[qual] = current;
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
error = -ENOMEM;
out_release:
context->owner[qual] = NULL;
ds_put_context(context);
+ put_tracer(task);
+ return error;
+
+ out_put_tracer:
+ spin_unlock_irqrestore(&ds_lock, irq);
+ ds_put_context(context);
+ put_tracer(task);
return error;
out_unlock:
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
ds_put_context(context);
return error;
}
.sizeof_ds = sizeof(long) * 12,
.sizeof_field = sizeof(long),
.sizeof_rec[ds_bts] = sizeof(long) * 3,
+#ifdef __i386__
.sizeof_rec[ds_pebs] = sizeof(long) * 10
+#else
+ .sizeof_rec[ds_pebs] = sizeof(long) * 18
+#endif
};
static const struct ds_configuration ds_cfg_64 = {
.sizeof_ds = 8 * 12,
.sizeof_field = 8,
.sizeof_rec[ds_bts] = 8 * 3,
+#ifdef __i386__
.sizeof_rec[ds_pebs] = 8 * 10
+#else
+ .sizeof_rec[ds_pebs] = 8 * 18
+#endif
};
static inline void
while (leftovers--)
ds_put_context(context);
}
-#endif /* CONFIG_X86_DS */
stts();
}
-void __init init_thread_xstate(void)
+void __cpuinit init_thread_xstate(void)
{
if (!HAVE_HWFP) {
xstate_size = sizeof(struct i387_soft_struct);
int __init probe_nr_irqs(void)
{
- int idx;
- int nr = 0;
-#ifndef CONFIG_XEN
- int nr_min = 32;
-#else
- int nr_min = NR_IRQS;
-#endif
-
- for (idx = 0; idx < nr_ioapics; idx++)
- nr += io_apic_get_redir_entries(idx) + 1;
-
- /* double it for hotplug and msi and nmi */
- nr <<= 1;
-
- /* something wrong ? */
- if (nr < nr_min)
- nr = nr_min;
- if (WARN_ON(nr > NR_IRQS))
- nr = NR_IRQS;
-
- return nr;
+ return NR_IRQS;
}
/* --------------------------------------------------------------------------
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
+ struct irq_desc *desc;
struct irq_cfg *cfg;
+ cpumask_t mask;
if (skip_ioapic_setup == 1)
return;
* cpu is online.
*/
cfg = irq_cfg(irq);
- if (!cfg->vector)
+ if (!cfg->vector) {
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
+ continue;
+
+ }
+
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ desc = irq_to_desc(irq);
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = TARGET_CPUS;
+
#ifdef CONFIG_INTR_REMAP
- else if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
-#endif
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq(irq, mask);
else
- set_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
+ set_ioapic_affinity_irq(irq, mask);
}
}
}
#ifdef CONFIG_X86_LOCAL_APIC
-static void __devinit kvm_setup_secondary_clock(void)
+static void __cpuinit kvm_setup_secondary_clock(void)
{
/*
* Now that the first cpu already had this clocksource initialized,
++p;
if (*p == '\0')
break;
- bridge = simple_strtol(p, &endp, 0);
+ bridge = simple_strtoul(p, &endp, 0);
if (p == endp)
break;
/*
* Enable and initialize the xsave feature.
*/
-void __init xsave_cntxt_init(void)
+void __ref xsave_cntxt_init(void)
{
unsigned int eax, ebx, ecx, edx;
int i;
if (!reset_value) {
- reset_value = kmalloc(sizeof(unsigned) * num_counters,
+ reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
GFP_ATOMIC);
if (!reset_value)
return;
pci_siemens_interrupt_controller);
/*
- * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config
- * have 4096 bytes. Even if the device is capable, that doesn't mean we can
- * access it. Maybe we don't have a way to generate extended config space
- * accesses. So check it
+ * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have
+ * 4096 bytes configuration space for each function of their processor
+ * configuration space.
*/
-static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
+static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev)
{
dev->cfg_size = pci_cfg_space_size_ext(dev);
}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size);
/*
* SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
* For 64-bit, we must skip the Xen hole in the middle of the address
* space, just after the big x86-64 virtual hole.
*/
-static int xen_pgd_walk(struct mm_struct *mm,
- int (*func)(struct mm_struct *mm, struct page *,
- enum pt_level),
- unsigned long limit)
+static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
{
- pgd_t *pgd = mm->pgd;
int flush = 0;
unsigned hole_low, hole_high;
unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
return flush;
}
+static int xen_pgd_walk(struct mm_struct *mm,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
+{
+ return __xen_pgd_walk(mm, mm->pgd, func, limit);
+}
+
/* If we're using split pte locks, then take the page's lock and
return a pointer to it. Otherwise return NULL. */
static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm)
xen_mc_batch();
- if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) {
+ if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) {
/* re-enable interrupts for flushing */
xen_mc_issue(0);
PT_PMD);
#endif
- xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT);
+ __xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT);
xen_mc_issue(0);
}
alternatives_smp_switch(0);
}
-static void xen_play_dead(void)
+static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
{
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
void xen_mark_init_mm_pinned(void);
-void __init xen_setup_vcpu_info_placement(void);
+void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
void xen_smp_init(void);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
val->intval = battery->current_now * 1000;
+ /* if power units are mW, convert to mA by
+ dividing by current voltage (mV/1000) */
+ if (!battery->power_unit) {
+ if (battery->voltage_now) {
+ val->intval /= battery->voltage_now;
+ val->intval *= 1000;
+ } else
+ val->intval = -1;
+ }
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
acpi_dmi_osi_linux(1, d); /* enable */
return 0;
}
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(0, d); /* disable */
- return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(-1, d); /* unknown */
- return 0;
-}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
return 0;
}
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
-
static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
- /*
- * Disable OSI(Linux) warnings on all "Acer, inc."
- *
- * _OSI(Linux) disables the latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
- */
- /*
- * note that dmi_check_system() uses strstr()
- * to match sub-strings rather than !strcmp(),
- * so "Acer" below matches "Acer, inc." above.
- */
- /*
- * Disable OSI(Linux) warnings on all "Acer"
- *
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Acer",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
- * Disable OSI(Linux) warnings on all "Apple Inc."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Apple",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "BenQ"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "BenQ",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Clevo Co."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Clevo",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "COMPAL"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Compal",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- },
- },
- { /* OSI(Linux) touches USB, unknown side-effect */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Dimension 5150",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell i1501",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell Latitude D830",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex GX620",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
- },
- },
- { /* OSI(Linux) causes some USB initialization to not run */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex 755",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1900",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1950",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PE R200",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
- },
- },
- { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR M4300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Vostro 1000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE SC440",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dialogue Flybook V5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
- *
- * _OSI(Linux) disables latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Fujitsu Siemens",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- },
- },
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+
/*
- * Disable OSI(Linux) warnings on all "Hewlett-Packard"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * .ident = "HP Pavilion tx 1000"
- * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
- * .ident = "HP Pavilion dv2000"
- * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
- * .ident = "HP Pavilion dv5000",
- * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
- * .ident = "HP Pavilion dv6300 30BC",
- * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
- * .ident = "HP Pavilion dv6000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
- * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
- * .ident = "HP Pavilion dv9000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
- * .ident = "HP Pavilion dv9500",
- * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
- * .ident = "HP/Compaq Presario C500",
- * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
- * .ident = "HP/Compaq Presario F500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
- * _OSI(Linux) unknown effect:
- * .ident = "HP Pavilion dv6500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
+ * Linux ignores it, except for the machines enumerated below.
*/
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Hewlett-Packard",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- },
- },
+
/*
* Lenovo has a mix of systems OSI(Linux) situations
* and thus we can not wildcard the vendor.
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
},
},
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 V100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
- },
- },
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 N100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "LG Electronics"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- *
- * unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "LG",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- },
- },
- /* NEC - OSI(Linux) effect unknown */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "NEC VERSA M360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
- },
- },
- /* Panasonic */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "Panasonic",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
- /* Toughbook CF-52 */
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Samsung Electronics"
- *
- * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
- * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Samsung",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Sony Corporation"
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Sony",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "TOSHIBA"
- *
- * _OSI(Linux) breaks sound (bugzilla 7787):
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Toshiba",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- },
- },
{}
};
goto unlock;
err:
/* false interrupt, state didn't change */
- ++ec->curr->irq_count;
+ if (in_interrupt())
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
-#include <linux/dmi.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
/*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
*
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
*
- * As Linux evolves, the features that it supports change.
- * So an OSI string such as "Linux" is not specific enough
- * to be useful across multiple versions of Linux. It
- * doesn't identify any particular feature, interface,
- * or even any particular version of Linux...
+ * Unfortunately, reference BIOS writers got wind of this
+ * and put OSI(Linux) in their example code, quickly exposing
+ * this string as ill-conceived and opening the door to
+ * an un-bounded number of BIOS incompatibilities.
*
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
- * to a BIOS _OSI(Linux) query. When
- * a reference mobile BIOS started using it, its use
- * started to spread to many vendor platforms.
- * As it is not supportable, we need to halt that spread.
+ * For example, OSI(Linux) was used on resume to re-POST a
+ * video card on one system, because Linux at that time
+ * could not do a speedy restore in its native driver.
+ * But then upon gaining quick native restore capability,
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI! On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
*
- * Today, most BIOS references to _OSI(Linux) are noise --
- * they have no functional effect and are just dead code
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
+ * So "Linux" turned out to be a really poor chose of
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
- * not ignore it will require a kernel source update to
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * Linux will complain on the console when it sees it, and return FALSE.
+ * To get Linux to return TRUE for your system will require
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
*/
-#define OSI_LINUX_ENABLE 0
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
unsigned int known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
return (AE_OK);
}
-/**
- * acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- * Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-
- if (!dmi_available)
- return -1;
-
- printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
- dmi_get_system_info(DMI_SYS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
- dmi_get_system_info(DMI_PRODUCT_NAME));
- printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
- dmi_get_system_info(DMI_BOARD_NAME));
- printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
- dmi_get_system_info(DMI_BIOS_DATE));
-
- return 0;
-}
-
-
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
- if (!osi_linux.dmi) {
- if (acpi_dmi_dump())
- printk(KERN_NOTICE PREFIX
- "[please extract dmidecode output]\n");
- printk(KERN_NOTICE PREFIX
- "Please send DMI info above to "
- "linux-acpi@vger.kernel.org\n");
- }
- if (!osi_linux.known && !osi_linux.cmdline) {
- printk(KERN_NOTICE PREFIX
- "If \"acpi_osi=%sLinux\" works better, "
- "please notify linux-acpi@vger.kernel.org\n",
- osi_linux.enable ? "!" : "");
- }
-
if (osi_linux.enable)
return AE_OK;
}
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- /*
- * Don't set Power button GPE as run_wake
- * if Fixed Power button is used
- */
- if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
- !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
- device->wakeup.flags.run_wake = 0;
- device->wakeup.flags.valid = 0;
- }
-
end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
old_suspend_ordering = true;
}
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
}
/* If ACPI is not enabled by the BIOS, we need to enable it here. */
- acpi_enable();
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
return 0;
}
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+ set_sci_en_on_resume = true;
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
},
},
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
ret = input_register_polled_device(toshiba_acpi.poll_dev);
if (ret) {
printk(MY_ERR "unable to register kill-switch input device\n");
- rfkill_free(toshiba_acpi.rfk_dev);
- toshiba_acpi.rfk_dev = NULL;
toshiba_acpi_exit();
return ret;
}
struct acpi_object_list *arguments, unsigned long long *data)
{
acpi_status status = AE_OK;
- union acpi_object *element;
+ union acpi_object element;
struct acpi_buffer buffer = { 0, NULL };
-
if (!data)
return AE_BAD_PARAMETER;
- element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
- if (!element)
- return AE_NO_MEMORY;
-
buffer.length = sizeof(union acpi_object);
- buffer.pointer = element;
+ buffer.pointer = &element;
status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
if (ACPI_FAILURE(status)) {
acpi_util_eval_error(handle, pathname, status);
- kfree(element);
return status;
}
- if (element->type != ACPI_TYPE_INTEGER) {
+ if (element.type != ACPI_TYPE_INTEGER) {
acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
- kfree(element);
return AE_BAD_DATA;
}
- *data = element->integer.value;
- kfree(element);
+ *data = element.integer.value;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
return 1;
+ /* TECRA M4 sometimes forgets its identify and reports bogus
+ * DMI information. As the bogus information is a bit
+ * generic, match as many entries as possible. This manual
+ * matching is necessary because dmi_system_id.matches is
+ * limited to four entries.
+ */
+ if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0"))
+ return 1;
+
return 0;
}
}
}
+ if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
+ ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
+ "firmware update to be fully functional.\n");
+ ata_dev_printk(dev, KERN_WARNING, " contact the vendor "
+ "or visit http://ata.wiki.kernel.org.\n");
+ }
+
return 0;
err_out_nosup:
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
+ /* Seagate NCQ + FLUSH CACHE firmware bug */
+ { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
-#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_BASE 0x0800
+#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
-#define RB500_CF_REG_DATA 0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
void __iomem *ioaddr = ap->ioaddr.data_addr;
+ int retlen = buflen;
if (write_data) {
for (; buflen > 0; buflen--, buf++)
}
rb532_pata_finish_io(adev->link->ap);
+ return retlen;
}
static void rb532_pata_freeze(struct ata_port *ap)
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
- ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
- ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
+ ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
int in_irq;
/* Details of hardware device */
- unsigned long physaddr;
+ resource_size_t physaddr;
void __iomem *baseaddr;
int irq;
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
- req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, req->hard_nr_sectors,
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
int rc;
dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
- dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+ (unsigned long long)ace->physaddr, ace->irq);
spin_lock_init(&ace->lock);
init_completion(&ace->id_completion);
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
- dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
- ace->physaddr, ace->baseaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+ (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
ace->media_change = 1;
ace_revalidate_disk(ace->gd);
err_blk_initq:
iounmap(ace->baseaddr);
err_ioremap:
- dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
- ace->physaddr);
+ dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+ (unsigned long long) ace->physaddr);
return -ENOMEM;
}
}
static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
int irq, int bus_width)
{
struct ace_device *ace;
static int __devinit ace_probe(struct platform_device *dev)
{
- unsigned long physaddr = 0;
+ resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
int id = dev->id;
int irq = NO_IRQ;
ace_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource res;
- unsigned long physaddr;
+ resource_size_t physaddr;
const u32 *id;
int irq, bus_width, rc;
static int uninorth_rev;
static int is_u3;
-static char __devinitdata *aperture = NULL;
+static char *aperture = NULL;
static int uninorth_fetch_size(void)
{
* chance that the WaveArtist driver could touch these bits to
* enable or disable the speaker.
*/
-extern spinlock_t gpio_lock;
extern unsigned int system_rev;
static inline void netwinder_ds1620_set_clk(int clk)
{
- gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
+ nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
}
static inline void netwinder_ds1620_set_data(int dat)
{
- gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
+ nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
}
static inline int netwinder_ds1620_get_data(void)
{
- return gpio_read() & GPIO_DATA;
+ return nw_gpio_read() & GPIO_DATA;
}
static inline void netwinder_ds1620_set_data_dir(int dir)
{
- gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
+ nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
}
static inline void netwinder_ds1620_reset(void)
{
- cpld_modify(CPLD_DS_ENABLE, 0);
- cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
+ nw_cpld_modify(CPLD_DS_ENABLE, 0);
+ nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
}
static inline void netwinder_lock(unsigned long *flags)
{
- spin_lock_irqsave(&gpio_lock, *flags);
+ spin_lock_irqsave(&nw_gpio_lock, *flags);
}
static inline void netwinder_unlock(unsigned long *flags)
{
- spin_unlock_irqrestore(&gpio_lock, *flags);
+ spin_unlock_irqrestore(&nw_gpio_lock, *flags);
}
static inline void netwinder_set_fan(int i)
{
unsigned long flags;
- spin_lock_irqsave(&gpio_lock, flags);
- gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
static inline int netwinder_get_fan(void)
if ((system_rev & 0xf000) == 0x4000)
return FAN_ALWAYS_ON;
- return (gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
+ return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
}
/*
* do is go probing around in the usual places hoping we can find it.
*/
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
{
struct stlibrd *brdp;
unsigned int iobase, eid, i;
* can find.
*/
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
{
struct stlibrd *brdp, *nxtbrdp;
struct stlconf conf;
static int gbFlashSize = KFLASH_SIZE;
static DEFINE_MUTEX(nwflash_mutex);
-extern spinlock_t gpio_lock;
-
static int get_flash_id(void)
{
volatile unsigned int c1, c2;
* we want to write a bit pattern XXX1 to Xilinx to enable
* the write gate, which will be open for about the next 2ms.
*/
- spin_lock_irqsave(&gpio_lock, flags);
- cpld_modify(1, 1);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
/*
* let the ISA bus to catch on...
}
#endif
if (device == MKDEV(TTYAUX_MAJOR, 1)) {
- driver = tty_driver_kref_get(console_device(&index));
- if (driver) {
- /* Don't let /dev/console block */
- filp->f_flags |= O_NONBLOCK;
- noctty = 1;
- goto got_driver;
+ struct tty_driver *console_driver = console_device(&index);
+ if (console_driver) {
+ driver = tty_driver_kref_get(console_driver);
+ if (driver) {
+ /* Don't let /dev/console block */
+ filp->f_flags |= O_NONBLOCK;
+ noctty = 1;
+ goto got_driver;
+ }
}
mutex_unlock(&tty_mutex);
return -ENODEV;
if (!request_mem_region(drvdata->mem_start,
drvdata->mem_size, DRIVER_NAME)) {
dev_err(dev, "Couldn't lock memory region at %Lx\n",
- regs_res->start);
+ (unsigned long long) regs_res->start);
retval = -EBUSY;
goto failed1;
}
mutex_init(&drvdata->sem);
drvdata->is_open = 0;
- dev_info(dev, "ioremap %lx to %p with size %Lx\n",
- (unsigned long int)drvdata->mem_start,
- drvdata->base_address, drvdata->mem_size);
+ dev_info(dev, "ioremap %llx to %p with size %llx\n",
+ (unsigned long long) drvdata->mem_start,
+ drvdata->base_address,
+ (unsigned long long) drvdata->mem_size);
cdev_init(&drvdata->cdev, &hwicap_fops);
drvdata->cdev.owner = THIS_MODULE;
return ret;
}
-static int __devexit talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct of_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct talitos_private *priv = dev_get_drvdata(dev);
.name = "talitos",
.match_table = talitos_match,
.probe = talitos_probe,
- .remove = __devexit_p(talitos_remove),
+ .remove = talitos_remove,
};
static int __init talitos_init(void)
* already registered driver
*/
-static int i82875p_registered = 1;
-
static struct edac_pci_ctl_info *i82875p_pci;
static void i82875p_get_error_info(struct mem_ctl_info *mci,
"%s(): pci_bus_add_device() Failed\n",
__func__);
}
+ pci_bus_assign_resources(dev->bus);
}
*ovrfl_pdev = dev;
goto fail0;
}
+ /* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */
+ kobject_get(&mci->edac_mci_kobj);
+
debugf3("%s(): init mci\n", __func__);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
return 0;
fail1:
+ kobject_put(&mci->edac_mci_kobj);
edac_mc_free(mci);
fail0:
{
debugf3("%s()\n", __func__);
+ i82875p_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+
pci_unregister_driver(&i82875p_driver);
- if (!i82875p_registered) {
- i82875p_remove_one(mci_pdev);
- pci_dev_put(mci_pdev);
- }
}
module_init(i82875p_init);
.model = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
/* iPod mini */ {
.firmware_revision = 0x0a2700,
.model = 0x000023,
return;
}
+ drm_vblank_cleanup(dev);
+
drm_lastclose(dev);
if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&
}
}
-static void drm_vblank_cleanup(struct drm_device *dev)
+void drm_vblank_cleanup(struct drm_device *dev)
{
/* Bail if the driver didn't call drm_vblank_init() */
if (dev->num_crtcs == 0)
free_irq(dev->pdev->irq, dev);
- drm_vblank_cleanup(dev);
-
return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);
spin_lock_init(&dev_priv->user_irq_lock);
+ ret = drm_vblank_init(dev, I915_NUM_PIPE);
+
+ if (ret) {
+ (void) i915_driver_unload(dev);
+ return ret;
+ }
+
return ret;
}
PIPE_B,
};
+#define I915_NUM_PIPE 2
+
/* Interface history:
*
* 1.1: Original.
int user_irq_refcount;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
+ u32 pipestat[2];
int tex_lru_log_granularity;
int allow_batchbuffer;
u32 saveDSPBCNTR;
u32 saveDSPARB;
u32 saveRENDERSTANDBY;
+ u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
struct drm_file *file_priv);
extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+
/* i915_mem.c */
extern int i915_mem_alloc(struct drm_device *dev, void *data,
struct drm_file *file_priv);
#include "i915_drv.h"
#include <linux/swap.h>
+#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
static int
i915_gem_object_set_domain(struct drm_gem_object *obj,
uint32_t read_domains,
i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_get_aperture *args = data;
- struct drm_i915_gem_object *obj_priv;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
args->aper_size = dev->gtt_total;
- args->aper_available_size = args->aper_size;
-
- list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
- if (obj_priv->pin_count > 0)
- args->aper_available_size -= obj_priv->obj->size;
- }
+ args->aper_available_size = (args->aper_size -
+ atomic_read(&dev->pin_memory));
return 0;
}
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
-
- if (obj_priv->gtt_space == NULL) {
- /* We evicted the buffer in the process of validating
- * our set of buffers in. We could try to recover by
- * kicking them everything out and trying again from
- * the start.
- */
- ret = -ENOMEM;
- goto err;
- }
/* make sure all previous memory operations have passed */
ret = i915_gem_object_set_domain(obj,
i915_gem_retire_requests(dev);
- /* Active and flushing should now be empty as we've
- * waited for a sequence higher than any pending execbuffer
- */
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+ if (!dev_priv->mm.wedged) {
+ /* Active and flushing should now be empty as we've
+ * waited for a sequence higher than any pending execbuffer
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.active_list));
+ WARN_ON(!list_empty(&dev_priv->mm.flushing_list));
+ /* Request should now be empty as we've also waited
+ * for the last request in the list
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.request_list));
+ }
- /* Request should now be empty as we've also waited
- * for the last request in the list
+ /* Empty the active and flushing lists to inactive. If there's
+ * anything left at this point, it means that we're wedged and
+ * nothing good's going to happen by leaving them there. So strip
+ * the GPU domains and just stuff them onto inactive.
*/
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
+ while (!list_empty(&dev_priv->mm.active_list)) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = list_first_entry(&dev_priv->mm.active_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
+
+ while (!list_empty(&dev_priv->mm.flushing_list)) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
- /* Move all buffers out of the GTT. */
+
+ /* Move all inactive buffers out of the GTT. */
ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+ WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
- BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
-
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
#define MAX_NOPID ((u32)~0)
-/** These are the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \
- I915_ASLE_INTERRUPT | \
- I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+/**
+ * Interrupts that are always left unmasked.
+ *
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+
+/** These are all of the interrupts used by the driver */
+#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
+ I915_INTERRUPT_ENABLE_VAR)
void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
}
}
+static inline u32
+i915_pipestat(int pipe)
+{
+ if (pipe == 0)
+ return PIPEASTAT;
+ if (pipe == 1)
+ return PIPEBSTAT;
+ BUG();
+}
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != mask) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] |= mask;
+ /* Enable the interrupt, clear any pending status */
+ I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+ (void) I915_READ(reg);
+ }
+}
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != 0) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] &= ~mask;
+ I915_WRITE(reg, dev_priv->pipestat[pipe]);
+ (void) I915_READ(reg);
+ }
+}
+
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 iir;
+ u32 iir, new_iir;
u32 pipea_stats, pipeb_stats;
+ u32 vblank_status;
+ u32 vblank_enable;
int vblank = 0;
+ unsigned long irqflags;
+ int irq_received;
+ int ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, ~0);
iir = I915_READ(IIR);
- if (iir == 0) {
- if (dev->pdev->msi_enabled) {
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IMR);
- }
- return IRQ_NONE;
+ if (IS_I965G(dev)) {
+ vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ } else {
+ vblank_status = I915_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
}
- /*
- * Clear the PIPE(A|B)STAT regs before the IIR otherwise
- * we may get extra interrupts.
- */
- if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
+ for (;;) {
+ irq_received = iir != 0;
+
+ /* Can't rely on pipestat interrupt bit in iir as it might
+ * have been cleared after the pipestat interrupt was received.
+ * It doesn't set the bit in iir again, but it still produces
+ * interrupts (for non-MSI).
+ */
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipea_stats = I915_READ(PIPEASTAT);
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A))
- pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ pipeb_stats = I915_READ(PIPEBSTAT);
+ /*
+ * Clear the PIPE(A|B)STAT regs before the IIR
+ */
+ if (pipea_stats & 0x8000ffff) {
+ I915_WRITE(PIPEASTAT, pipea_stats);
+ irq_received = 1;
+ }
+
+ if (pipeb_stats & 0x8000ffff) {
+ I915_WRITE(PIPEBSTAT, pipeb_stats);
+ irq_received = 1;
+ }
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+ if (!irq_received)
+ break;
+
+ ret = IRQ_HANDLED;
+
+ I915_WRITE(IIR, iir);
+ new_iir = I915_READ(IIR); /* Flush posted writes */
+
+ if (dev_priv->sarea_priv)
+ dev_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
+
+ if (iir & I915_USER_INTERRUPT) {
+ dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
+ if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
}
- I915_WRITE(PIPEASTAT, pipea_stats);
- }
- if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
- pipeb_stats = I915_READ(PIPEBSTAT);
- /* Ack the event */
- I915_WRITE(PIPEBSTAT, pipeb_stats);
-
- /* The vblank interrupt gets enabled even if we didn't ask for
- it, so make sure it's shut down again */
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B))
- pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
}
- if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
+ if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+ (iir & I915_ASLE_INTERRUPT))
opregion_asle_intr(dev);
- I915_WRITE(PIPEBSTAT, pipeb_stats);
- }
-
- I915_WRITE(IIR, iir);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IIR); /* Flush posted writes */
-
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- if (iir & I915_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
- DRM_WAKEUP(&dev_priv->irq_queue);
+ /* With MSI, interrupts are only generated when iir
+ * transitions from zero to nonzero. If another bit got
+ * set while we were handling the existing iir bits, then
+ * we would never get another interrupt.
+ *
+ * This is fine on non-MSI as well, as if we hit this path
+ * we avoid exiting the interrupt handler only to generate
+ * another one.
+ *
+ * Note that for MSI this could cause a stray interrupt report
+ * if an interrupt landed in the time between writing IIR and
+ * the posting read. This should be rare enough to never
+ * trigger the 99% of 100,000 interrupts test for disabling
+ * stray interrupts.
+ */
+ iir = new_iir;
}
- if (iir & I915_ASLE_INTERRUPT)
- opregion_asle_intr(dev);
-
- return IRQ_HANDLED;
+ return ret;
}
static int i915_emit_irq(struct drm_device * dev)
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
- pipe);
- return 0;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- /* Enabling vblank events in IMR comes before PIPESTAT write, or
- * there's a race where the PIPESTAT vblank bit gets set to 1, so
- * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
- * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
- * IMR masks it. It doesn't ever get set after we clear the masking
- * in IMR because the ISR bit is edge, not level-triggered, on the
- * OR of PIPESTAT bits.
- */
- i915_enable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
if (IS_I965G(dev))
- pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
- pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-
return 0;
}
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
- pipe);
- return;
- break;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- i915_disable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
- pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_disable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE |
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
+ (void) I915_READ(IER);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int ret, num_pipes = 2;
-
- /* Set initial unmasked IRQs to just the selected vblank pipes. */
- dev_priv->irq_mask_reg = ~0;
-
- ret = drm_vblank_init(dev, num_pipes);
- if (ret)
- return ret;
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
- dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK;
+ /* Unmask the interrupts that we always want on. */
+ dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
+
+ dev_priv->pipestat[0] = 0;
+ dev_priv->pipestat[1] = 0;
+
+ /* Disable pipe interrupt enables, clear pending pipe status */
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ /* Clear pending interrupt status */
+ I915_WRITE(IIR, I915_READ(IIR));
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+ I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
opregion_enable_asle(dev);
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 temp;
if (!dev_priv)
return;
dev_priv->vblank_pipe = 0;
I915_WRITE(HWSTAM, 0xffffffff);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
- temp = I915_READ(PIPEASTAT);
- I915_WRITE(PIPEASTAT, temp);
- temp = I915_READ(PIPEBSTAT);
- I915_WRITE(PIPEBSTAT, temp);
- temp = I915_READ(IIR);
- I915_WRITE(IIR, temp);
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ I915_WRITE(IIR, I915_READ(IIR));
}
struct opregion_asle *asle = dev_priv->opregion.asle;
if (asle) {
- u32 pipeb_stats = I915_READ(PIPEBSTAT);
if (IS_MOBILE(dev)) {
- /* Many devices trigger events with a write to the
- legacy backlight controller, so we need to ensure
- that it's able to generate interrupts */
- I915_WRITE(PIPEBSTAT, pipeb_stats |=
- I915_LEGACY_BLC_EVENT_ENABLE);
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT |
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
- } else
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT);
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+ i915_enable_pipestat(dev_priv, 1,
+ I915_LEGACY_BLC_EVENT_ENABLE);
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock,
+ irqflags);
+ }
asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
ASLE_PFMB_EN;
if (IS_I965G(dev) && IS_MOBILE(dev))
dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
if (IS_I965G(dev) && IS_MOBILE(dev))
I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+ /* Hardware status page */
+ I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
int mga_driver_load(struct drm_device * dev, unsigned long flags)
{
drm_mga_private_t *dev_priv;
+ int ret;
dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
if (!dev_priv)
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
+ ret = drm_vblank_init(dev, 1);
+
+ if (ret) {
+ (void) mga_driver_unload(dev);
+ return ret;
+ }
+
return 0;
}
int mga_driver_irq_postinstall(struct drm_device *dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
- int ret;
-
- ret = drm_vblank_init(dev, 1);
- if (ret)
- return ret;
DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
.dev_priv_size = sizeof(drm_r128_buf_priv_t),
+ .load = r128_driver_load,
.preclose = r128_driver_preclose,
.lastclose = r128_driver_lastclose,
.get_vblank_counter = r128_get_vblank_counter,
.patchlevel = DRIVER_PATCHLEVEL,
};
+int r128_driver_load(struct drm_device * dev, unsigned long flags)
+{
+ return drm_vblank_init(dev, 1);
+}
+
static int __init r128_init(void)
{
driver.num_ioctls = r128_max_ioctl;
extern int r128_driver_irq_postinstall(struct drm_device *dev);
extern void r128_driver_irq_uninstall(struct drm_device * dev);
extern void r128_driver_lastclose(struct drm_device * dev);
+extern int r128_driver_load(struct drm_device * dev, unsigned long flags);
extern void r128_driver_preclose(struct drm_device * dev,
struct drm_file *file_priv);
int r128_driver_irq_postinstall(struct drm_device *dev)
{
- return drm_vblank_init(dev, 1);
+ return 0;
}
void r128_driver_irq_uninstall(struct drm_device * dev)
if (ret != 0)
return ret;
+ ret = drm_vblank_init(dev, 2);
+ if (ret) {
+ radeon_driver_unload(dev);
+ return ret;
+ }
+
DRM_DEBUG("%s card detected\n",
((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
return ret;
{
drm_radeon_private_t *dev_priv =
(drm_radeon_private_t *) dev->dev_private;
- int ret;
atomic_set(&dev_priv->swi_emitted, 0);
DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
- ret = drm_vblank_init(dev, 2);
- if (ret)
- return ret;
-
dev->max_vblank_count = 0x001fffff;
radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
if (!dev_priv)
return -EINVAL;
- drm_vblank_init(dev, 1);
status = VIA_READ(VIA_REG_INTERRUPT);
VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
| dev_priv->irq_enable_mask);
ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
if (ret) {
drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+ return ret;
}
- return ret;
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret) {
+ drm_sman_takedown(&dev_priv->sman);
+ drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+ return ret;
+ }
+
+ return 0;
}
int via_driver_unload(struct drm_device *dev)
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_RDESC_JIS },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_ISO_KEYBOARD },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
.driver_data = APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
#define USB_VENDOR_ID_GAMERON 0x0810
#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001
+#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002
#define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc
static const struct hid_device_id pl_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR),
.driver_data = 1 }, /* Twin USB Joystick */
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR),
+ .driver_data = 1 }, /* Twin USB Joystick */
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */
{ }
};
if (insize > HID_MAX_BUFFER_SIZE)
insize = HID_MAX_BUFFER_SIZE;
- mutex_lock(&usbhid->setup);
if (hid_alloc_buffers(dev, hid)) {
ret = -ENOMEM;
goto fail;
hid_dump_device(hid);
set_bit(HID_STARTED, &usbhid->iofl);
- mutex_unlock(&usbhid->setup);
return 0;
usbhid->urbout = NULL;
usbhid->urbctrl = NULL;
hid_free_buffers(dev, hid);
- mutex_unlock(&usbhid->setup);
return ret;
}
if (WARN_ON(!usbhid))
return;
- mutex_lock(&usbhid->setup);
clear_bit(HID_STARTED, &usbhid->iofl);
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
usbhid->urbout = NULL;
hid_free_buffers(hid_to_usb_dev(hid), hid);
- mutex_unlock(&usbhid->setup);
}
static struct hid_ll_driver usb_hid_driver = {
hid->driver_data = usbhid;
usbhid->hid = hid;
- mutex_init(&usbhid->setup); /* needed on suspend/resume */
ret = hid_add_device(hid);
if (ret) {
struct hid_device *hid = usb_get_intfdata (intf);
struct usbhid_device *usbhid = hid->driver_data;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_SUSPENDED, &usbhid->iofl);
spin_unlock_irq(&usbhid->inlock);
del_timer_sync(&usbhid->io_retry);
usb_kill_urb(usbhid->urbin);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
struct usbhid_device *usbhid = hid->driver_data;
int status;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
clear_bit(HID_SUSPENDED, &usbhid->iofl);
usbhid->retry_delay = 0;
status = hid_start_in(hid);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "resume status %d\n", status);
return status;
}
dma_addr_t outbuf_dma; /* Output buffer dma */
spinlock_t outlock; /* Output fifo spinlock */
- struct mutex setup;
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
struct timer_list io_retry; /* Retry timer */
unsigned long stop_retry; /* Time to give up, in jiffies */
MODULE_AUTHOR("Nicolas Boichat");
MODULE_DESCRIPTION("Apple SMC");
MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(dmi, applesmc_whitelist);
if (adapter_parm[type].init.val)
line_set(port, 1, &adapter_parm[type].init);
- parport_release(adapter->pdev);
-
if (i2c_bit_add_bus(&adapter->adapter) < 0) {
printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
goto ERROR1;
return;
ERROR1:
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
ERROR0:
kfree(adapter);
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
#include <asm/io.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-iic.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
/* i2c controller state */
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
#include <asm/irq.h>
+#include <asm/mach-types.h>
+
#include <mach/usb.h>
+#include <mach/mux.h>
#ifndef DEBUG
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_MACH_OMAP_H2
-
/* board-specific PM hooks */
-#include <asm/gpio.h>
-#include <mach/mux.h>
-#include <asm/mach-types.h>
-
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
}
+#endif
+
+#if defined(CONFIG_MACH_OMAP_H4)
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+ /* H4 controls this by DIP switch S2.4; no soft control.
+ * ON means the charger is always enabled. Leave it OFF
+ * unless the OTG port is used only in B-peripheral mode.
+ */
+}
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+ /* this board won't supply more than 8mA vbus power.
+ * some boards can switch a 100ma "unit load" (or more).
+ */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+ printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
#endif
/*-------------------------------------------------------------------------*/
* NOTE: guaranteeing certain response times might mean we shouldn't
* share keventd's work queue; a realtime task might be safest.
*/
-void
-isp1301_defer_work(struct isp1301 *isp, int work)
+static void isp1301_defer_work(struct isp1301 *isp, int work)
{
int status;
otg_ctrl &= ~OTG_XCEIV_INPUTS;
otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
-
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
static int otg_remove(struct platform_device *dev)
{
- otg_dev = 0;
+ otg_dev = NULL;
return 0;
}
-struct platform_driver omap_otg_driver = {
+static struct platform_driver omap_otg_driver = {
.probe = otg_probe,
.remove = otg_remove,
.driver = {
isp = dev_get_drvdata(dev);
+ /* FIXME -- not with a "new style" driver, it doesn't!! */
+
/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
if (isp->i2c_release)
isp->i2c_release(dev);
otg_unbind(isp);
#endif
if (machine_is_omap_h2())
- omap_free_gpio(2);
+ gpio_free(2);
isp->timer.data = 0;
set_bit(WORK_STOP, &isp->todo);
flush_scheduled_work();
put_device(&i2c->dev);
- the_transceiver = 0;
+ the_transceiver = NULL;
return 0;
}
if (!host) {
omap_writew(0, OTG_IRQ_EN);
power_down(isp);
- isp->otg.host = 0;
+ isp->otg.host = NULL;
return 0;
}
isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+#ifndef CONFIG_USB_OTG
u32 l;
+#endif
if (!otg || isp != the_transceiver)
return -ENODEV;
if (!isp->otg.default_a)
enable_vbus_draw(isp, 0);
usb_gadget_vbus_disconnect(isp->otg.gadget);
- isp->otg.gadget = 0;
+ isp->otg.gadget = NULL;
power_down(isp);
return 0;
}
power_up(isp);
isp->otg.state = OTG_STATE_B_IDLE;
- if (machine_is_omap_h2())
+ if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
/*-------------------------------------------------------------------------*/
-static int __init isp1301_probe(struct i2c_client *i2c)
+static int __init
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
int status;
struct isp1301 *isp;
static void __exit isp_exit(void)
{
if (the_transceiver)
- otg_set_transceiver(0);
+ otg_set_transceiver(NULL);
i2c_del_driver(&isp1301_driver);
}
module_exit(isp_exit);
/* detach any active clients. This must be done first, because
* it can fail; in which case we give up. */
- list_for_each_entry_safe(client, _n, &adap->clients, list) {
+ list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
struct i2c_driver *driver;
driver = client->driver;
config IDE_ARM
tristate "ARM IDE support"
- depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+ depends on ARM && (ARCH_RPC || ARCH_SHARK)
default y
config BLK_DEV_IDE_ICSIDE
hw->chipset = ide_acorn;
}
-static int __init
+static int __devinit
icside_register_v5(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *base;
.swdma_mask = ATA_SWDMA2,
};
-static int __init
+static int __devinit
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *ioc_base, *easi_base;
#define DRV_NAME "ide_arm"
-#ifdef CONFIG_ARCH_CLPS7500
-# include <mach/hardware.h>
-#
-# define IDE_ARM_IO (ISASLOT_IO + 0x1f0)
-# define IDE_ARM_IRQ IRQ_ISA_14
-#else
-# define IDE_ARM_IO 0x1f0
-# define IDE_ARM_IRQ IRQ_HARDDISK
-#endif
+#define IDE_ARM_IO 0x1f0
+#define IDE_ARM_IRQ IRQ_HARDDISK
static int __init ide_arm_init(void)
{
static DEFINE_RWLOCK(addr_space_lock);
-/* addr_space list will have zero and max already included as bounds */
-static struct hpsb_address_ops dummy_ops = { NULL, NULL, NULL, NULL };
-static struct hpsb_address_serve dummy_zero_addr, dummy_max_addr;
-
static struct hl_host_info *hl_get_hostinfo(struct hpsb_highlevel *hl,
struct hpsb_host *host)
return retval;
}
+static struct hpsb_address_ops dummy_ops;
+
+/* dummy address spaces as lower and upper bounds of the host's a.s. list */
static void init_hpsb_highlevel(struct hpsb_host *host)
{
- INIT_LIST_HEAD(&dummy_zero_addr.host_list);
- INIT_LIST_HEAD(&dummy_zero_addr.hl_list);
- INIT_LIST_HEAD(&dummy_max_addr.host_list);
- INIT_LIST_HEAD(&dummy_max_addr.hl_list);
+ INIT_LIST_HEAD(&host->dummy_zero_addr.host_list);
+ INIT_LIST_HEAD(&host->dummy_zero_addr.hl_list);
+ INIT_LIST_HEAD(&host->dummy_max_addr.host_list);
+ INIT_LIST_HEAD(&host->dummy_max_addr.hl_list);
- dummy_zero_addr.op = dummy_max_addr.op = &dummy_ops;
+ host->dummy_zero_addr.op = host->dummy_max_addr.op = &dummy_ops;
- dummy_zero_addr.start = dummy_zero_addr.end = 0;
- dummy_max_addr.start = dummy_max_addr.end = ((u64) 1) << 48;
+ host->dummy_zero_addr.start = host->dummy_zero_addr.end = 0;
+ host->dummy_max_addr.start = host->dummy_max_addr.end = ((u64) 1) << 48;
- list_add_tail(&dummy_zero_addr.host_list, &host->addr_space);
- list_add_tail(&dummy_max_addr.host_list, &host->addr_space);
+ list_add_tail(&host->dummy_zero_addr.host_list, &host->addr_space);
+ list_add_tail(&host->dummy_max_addr.host_list, &host->addr_space);
}
void highlevel_add_host(struct hpsb_host *host)
#include "ieee1394_types.h"
#include "csr.h"
+#include "highlevel.h"
struct hpsb_packet;
struct hpsb_iso;
struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES];
struct csr_control csr;
+
+ struct hpsb_address_serve dummy_zero_addr;
+ struct hpsb_address_serve dummy_max_addr;
};
enum devctl_cmd {
.model_id = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
/* iPod mini */ {
.firmware_revision = 0x0a2700,
.model_id = 0x000023,
return;
read_lock_irqsave(&sbp2_hi_logical_units_lock, flags);
+
list_for_each_entry(lu, &hi->logical_units, lu_list)
- if (likely(atomic_read(&lu->state) !=
- SBP2LU_STATE_IN_SHUTDOWN)) {
- atomic_set(&lu->state, SBP2LU_STATE_IN_RESET);
+ if (atomic_cmpxchg(&lu->state,
+ SBP2LU_STATE_RUNNING, SBP2LU_STATE_IN_RESET)
+ == SBP2LU_STATE_RUNNING)
scsi_block_requests(lu->shost);
- }
+
read_unlock_irqrestore(&sbp2_hi_logical_units_lock, flags);
}
/* struct for tracking if cqes have been reported to the application */
struct ehca_qmap_entry {
u16 app_wr_id;
- u16 reported;
+ u8 reported;
+ u8 cqe_req;
};
struct ehca_queue_map {
unsigned int entries;
unsigned int tail;
unsigned int left_to_poll;
+ unsigned int next_wqe_idx; /* Idx to first wqe to be flushed */
};
struct ehca_qp {
if (printk_timed_ratelimit(&ehca_dmem_warn_time,
30 * 1000))
ehca_gen_err("DMEM operations are not allowed"
- "as long as an ehca adapter is"
- "attached to the LPAR");
+ "in conjunction with eHCA");
return NOTIFY_BAD;
}
}
{
int i;
- qmap->tail = 0;
- for (i = 0; i < qmap->entries; i++)
+ qmap->tail = qmap->entries - 1;
+ qmap->left_to_poll = 0;
+ qmap->next_wqe_idx = 0;
+ for (i = 0; i < qmap->entries; i++) {
qmap->map[i].reported = 1;
+ qmap->map[i].cqe_req = 0;
+ }
}
/*
void *wqe_v;
u64 q_ofs;
u32 wqe_idx;
+ unsigned int tail_idx;
/* convert real to abs address */
wqe_p = wqe_p & (~(1UL << 63));
return -EFAULT;
}
+ tail_idx = (qmap->tail + 1) % qmap->entries;
wqe_idx = q_ofs / ipz_queue->qe_size;
- if (wqe_idx < qmap->tail)
- qmap->left_to_poll = (qmap->entries - qmap->tail) + wqe_idx;
- else
- qmap->left_to_poll = wqe_idx - qmap->tail;
+ /* check all processed wqes, whether a cqe is requested or not */
+ while (tail_idx != wqe_idx) {
+ if (qmap->map[tail_idx].cqe_req)
+ qmap->left_to_poll++;
+ tail_idx = (tail_idx + 1) % qmap->entries;
+ }
+ /* save index in queue, where we have to start flushing */
+ qmap->next_wqe_idx = wqe_idx;
return 0;
}
} else {
spin_lock_irqsave(&my_qp->send_cq->spinlock, flags);
my_qp->sq_map.left_to_poll = 0;
+ my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+ my_qp->sq_map.entries;
spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags);
spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags);
my_qp->rq_map.left_to_poll = 0;
+ my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+ my_qp->rq_map.entries;
spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags);
}
qmap_entry->app_wr_id = get_app_wr_id(send_wr->wr_id);
qmap_entry->reported = 0;
+ qmap_entry->cqe_req = 0;
switch (send_wr->opcode) {
case IB_WR_SEND:
if ((send_wr->send_flags & IB_SEND_SIGNALED ||
qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR)
- && !hidden)
+ && !hidden) {
wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM;
+ qmap_entry->cqe_req = 1;
+ }
if (send_wr->opcode == IB_WR_SEND_WITH_IMM ||
send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) {
qmap_entry = &my_qp->rq_map.map[rq_map_idx];
qmap_entry->app_wr_id = get_app_wr_id(cur_recv_wr->wr_id);
qmap_entry->reported = 0;
+ qmap_entry->cqe_req = 1;
wqe_cnt++;
} /* eof for cur_recv_wr */
goto repoll;
wc->qp = &my_qp->ib_qp;
+ qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
+ if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
+ /* We got a send completion. */
+ qmap = &my_qp->sq_map;
+ else
+ /* We got a receive completion. */
+ qmap = &my_qp->rq_map;
+
+ /* advance the tail pointer */
+ qmap->tail = qmap_tail_idx;
+
if (is_error) {
/*
* set left_to_poll to 0 because in error state, we will not
* get any additional CQEs
*/
- ehca_add_to_err_list(my_qp, 1);
+ my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+ my_qp->sq_map.entries;
my_qp->sq_map.left_to_poll = 0;
+ ehca_add_to_err_list(my_qp, 1);
+ my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+ my_qp->rq_map.entries;
+ my_qp->rq_map.left_to_poll = 0;
if (HAS_RQ(my_qp))
ehca_add_to_err_list(my_qp, 0);
- my_qp->rq_map.left_to_poll = 0;
}
- qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
- if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
- /* We got a send completion. */
- qmap = &my_qp->sq_map;
- else
- /* We got a receive completion. */
- qmap = &my_qp->rq_map;
-
qmap_entry = &qmap->map[qmap_tail_idx];
if (qmap_entry->reported) {
ehca_warn(cq->device, "Double cqe on qp_num=%#x",
wc->wr_id = replace_wr_id(cqe->work_request_id, qmap_entry->app_wr_id);
qmap_entry->reported = 1;
- /* this is a proper completion, we need to advance the tail pointer */
- if (++qmap->tail == qmap->entries)
- qmap->tail = 0;
-
/* if left_to_poll is decremented to 0, add the QP to the error list */
if (qmap->left_to_poll > 0) {
qmap->left_to_poll--;
else
qmap = &my_qp->rq_map;
- qmap_entry = &qmap->map[qmap->tail];
+ qmap_entry = &qmap->map[qmap->next_wqe_idx];
while ((nr < num_entries) && (qmap_entry->reported == 0)) {
/* generate flush CQE */
+
memset(wc, 0, sizeof(*wc));
- offset = qmap->tail * ipz_queue->qe_size;
+ offset = qmap->next_wqe_idx * ipz_queue->qe_size;
wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset);
if (!wqe) {
ehca_err(cq->device, "Invalid wqe offset=%#lx on "
wc->qp = &my_qp->ib_qp;
- /* mark as reported and advance tail pointer */
+ /* mark as reported and advance next_wqe pointer */
qmap_entry->reported = 1;
- if (++qmap->tail == qmap->entries)
- qmap->tail = 0;
- qmap_entry = &qmap->map[qmap->tail];
+ qmap->next_wqe_idx++;
+ if (qmap->next_wqe_idx == qmap->entries)
+ qmap->next_wqe_idx = 0;
+ qmap_entry = &qmap->map[qmap->next_wqe_idx];
wc++; nr++;
}
{
struct mlx4_ib_dev *dev = to_mdev(ibcq->device);
struct mlx4_ib_cq *cq = to_mcq(ibcq);
+ struct mlx4_mtt mtt;
int outst_cqe;
int err;
goto out;
}
+ mtt = cq->buf.mtt;
+
err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt);
if (err)
goto err_buf;
+ mlx4_mtt_cleanup(dev->dev, &mtt);
if (ibcq->uobject) {
cq->buf = cq->resize_buf->buf;
cq->ibcq.cqe = cq->resize_buf->cqe;
goto out;
err_buf:
+ mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt);
if (!ibcq->uobject)
mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf,
cq->resize_buf->cqe);
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
+ unsigned long flags;
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
ml_play_effects(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irqrestore(&ml->timer_lock, flags);
return 0;
}
atkbd_disable(atkbd);
/* make sure we don't have a command in flight */
- flush_scheduled_work();
+ cancel_delayed_work_sync(&atkbd->event_work);
sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
input_unregister_device(atkbd->dev);
atkbd->force_release_mask);
}
+/*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+ const unsigned int forced_release_keys[] = {
+ 0xae, 0xb0,
+ };
+ int i;
+
+ if (atkbd->set == 2)
+ for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+ __set_bit(forced_release_keys[i],
+ atkbd->force_release_mask);
+}
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
.callback = atkbd_setup_fixup,
.driver_data = atkbd_hp_keymap_fixup,
},
+ {
+ .ident = "Inventec Symphony",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+ },
+ .callback = atkbd_setup_fixup,
+ .driver_data = atkbd_inventec_keymap_fixup,
+ },
{ }
};
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
}
}
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+ switch (scancode) { /* phone key: */
+ case 0x82: return KEY_NUMERIC_0; /* 0 */
+ case 0x11: return KEY_NUMERIC_1; /* 1 */
+ case 0x12: return KEY_NUMERIC_2; /* 2 */
+ case 0x14: return KEY_NUMERIC_3; /* 3 */
+ case 0x21: return KEY_NUMERIC_4; /* 4 */
+ case 0x22: return KEY_NUMERIC_5; /* 5 */
+ case 0x24: return KEY_NUMERIC_6; /* 6 */
+ case 0x41: return KEY_NUMERIC_7; /* 7 */
+ case 0x42: return KEY_NUMERIC_8; /* 8 */
+ case 0x44: return KEY_NUMERIC_9; /* 9 */
+ case 0x84: return KEY_NUMERIC_POUND; /* # */
+ case 0x81: return KEY_NUMERIC_STAR; /* * */
+ case 0x18: return KEY_ENTER; /* pickup */
+ case 0x28: return KEY_ESC; /* hangup */
+ case 0x48: return KEY_LEFT; /* left arrow */
+ case 0x88: return KEY_RIGHT; /* right arrow */
+ default: return special_keymap(scancode);
+ }
+}
+
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+ } else if (!strcasecmp(phone, "atcom")) {
+ keymap = keymap_atcom;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
*/
static int hgpk_validate_byte(unsigned char *packet)
{
- return (packet[0] & 0x0C) == 0x08;
+ return (packet[0] & 0x0C) != 0x08;
}
static void hgpk_process_packet(struct psmouse *psmouse)
config SERIO_RPCKBD
tristate "Acorn RiscPC keyboard controller"
- depends on ARCH_ACORN || ARCH_CLPS7500
+ depends on ARCH_ACORN
default y
help
Say Y here if you have the Acorn RiscPC and want to use an AT
DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
},
},
+ {
+ .ident = "Dell XPS M1530",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+ },
+ },
+ {
+ .ident = "Compal HEL80I",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+ },
+ },
{ }
};
* - Support Intuos3 4x6
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
struct usb_device *usbdev;
struct usb_interface *intf;
struct urb *irq;
- struct wacom_wac * wacom_wac;
+ struct wacom_wac *wacom_wac;
struct mutex lock;
unsigned int open:1;
char phys[32];
};
struct wacom_combo {
- struct wacom * wacom;
- struct urb * urb;
+ struct wacom *wacom;
+ struct urb *urb;
};
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id *get_device_table(void);
#endif
#include "wacom.h"
#include "wacom_wac.h"
+/* defines to get HID report descriptor */
+#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01)
+#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02)
+#define HID_USAGE_UNDEFINED 0x00
+#define HID_USAGE_PAGE 0x05
+#define HID_USAGE_PAGE_DIGITIZER 0x0d
+#define HID_USAGE_PAGE_DESKTOP 0x01
+#define HID_USAGE 0x09
+#define HID_USAGE_X 0x30
+#define HID_USAGE_Y 0x31
+#define HID_USAGE_X_TILT 0x3d
+#define HID_USAGE_Y_TILT 0x3e
+#define HID_USAGE_FINGER 0x22
+#define HID_USAGE_STYLUS 0x20
+#define HID_COLLECTION 0xc0
+
+enum {
+ WCM_UNDEFINED = 0,
+ WCM_DESKTOP,
+ WCM_DIGITIZER,
+};
+
+struct hid_descriptor {
+ struct usb_descriptor_header header;
+ __le16 bcdHID;
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ u8 bDescriptorType;
+ __le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
+#define WAC_HID_FEATURE_REPORT 0x03
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
{
input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
- return;
}
void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
{
input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
- return;
}
void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
{
input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
- return;
}
void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
{
input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
- return;
}
__u16 wacom_be16_to_cpu(unsigned char *data)
void wacom_input_sync(void *wcombo)
{
input_sync(get_input_dev((struct wacom_combo *)wcombo));
- return;
}
static int wacom_open(struct input_dev *dev)
void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
BIT_MASK(BTN_5);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
}
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_4);
}
{
input_dev->evbit[0] |= BIT_MASK(EV_REL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
- BIT_MASK(BTN_TOOL_RUBBER);
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
}
+static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+ struct wacom_wac *wacom_wac)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct wacom_features *features = wacom_wac->features;
+ char limit = 0, result = 0;
+ int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+ unsigned char *report;
+
+ report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+ if (!report)
+ return -ENOMEM;
+
+ /* retrive report descriptors */
+ do {
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_DESCRIPTOR,
+ USB_RECIP_INTERFACE | USB_DIR_IN,
+ HID_DEVICET_REPORT << 8,
+ intf->altsetting[0].desc.bInterfaceNumber, /* interface */
+ report,
+ hid_desc->wDescriptorLength,
+ 5000); /* 5 secs */
+ } while (result < 0 && limit++ < 5);
+
+ if (result < 0)
+ goto out;
+
+ for (i = 0; i < hid_desc->wDescriptorLength; i++) {
+
+ switch (report[i]) {
+ case HID_USAGE_PAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_PAGE_DIGITIZER:
+ usage = WCM_DIGITIZER;
+ i++;
+ break;
+
+ case HID_USAGE_PAGE_DESKTOP:
+ usage = WCM_DESKTOP;
+ i++;
+ break;
+ }
+ break;
+
+ case HID_USAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_X:
+ if (usage == WCM_DESKTOP) {
+ if (finger) {
+ features->touch_x_max =
+ features->touch_y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 6]);
+ i += 7;
+ } else if (pen) {
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ }
+ } else if (usage == WCM_DIGITIZER) {
+ /* max pressure isn't reported
+ features->pressure_max = (unsigned short)
+ (report[i+4] << 8 | report[i + 3]);
+ */
+ features->pressure_max = 255;
+ i += 4;
+ }
+ break;
+
+ case HID_USAGE_Y:
+ if (usage == WCM_DESKTOP)
+ features->y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+
+ case HID_USAGE_FINGER:
+ finger = 1;
+ i++;
+ break;
+
+ case HID_USAGE_STYLUS:
+ pen = 1;
+ i++;
+ break;
+
+ case HID_USAGE_UNDEFINED:
+ if (usage == WCM_DESKTOP && finger) /* capacity */
+ features->pressure_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+ }
+ break;
+
+ case HID_COLLECTION:
+ /* reset UsagePage ans Finger */
+ finger = usage = 0;
+ break;
+ }
+ }
+
+ result = 0;
+
+ out:
+ kfree(report);
+ return result;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
+ struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
char rep_data[2], limit = 0;
+ struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
- wacom_wac->features = get_wacom_feature(id);
- BUG_ON(wacom_wac->features->pktlen > 10);
+ wacom_wac->features = features = get_wacom_feature(id);
+ BUG_ON(features->pktlen > 10);
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
input_dev->open = wacom_open;
input_dev->close = wacom_close;
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ /* TabletPC need to retrieve the physical and logical maximum from report descriptor */
+ if (wacom_wac->features->type == TABLETPC) {
+ if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
+ if (usb_get_extra_descriptor(&interface->endpoint[0],
+ HID_DEVICET_REPORT, &hid_desc)) {
+ printk("wacom: can not retrive extra class descriptor\n");
+ goto fail2;
+ }
+ }
+ error = wacom_parse_hid(intf, hid_desc, wacom_wac);
+ if (error)
+ goto fail2;
+ }
+
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
- input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+ if (features->type == TABLETPC) {
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+ input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
+ }
input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
- endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
if (error)
goto fail3;
- /* Ask the tablet to report tablet data. Repeat until it succeeds */
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- usb_set_report(intf, 3, 2, rep_data, 2);
- usb_get_report(intf, 3, 2, rep_data, 2);
- } while (rep_data[1] != 2 && limit++ < 5);
+ /*
+ * Ask the tablet to report tablet data if it is not a Tablet PC.
+ * Repeat until it succeeds
+ */
+ if (wacom_wac->features->type != TABLETPC) {
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+ }
usb_set_intfdata(intf, wacom);
return 0;
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
- usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+ usb_buffer_free(interface_to_usbdev(intf), 10,
+ wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom->wacom_wac);
kfree(wacom);
}
return 1;
}
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ char *data = wacom->data;
+ int prox = 0, pressure;
+ static int stylusInProx, touchInProx = 1, touchOut;
+ struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+
+ dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+ if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+ if (urb->actual_length == 5) { /* with touch */
+ prox = data[0] & 0x03;
+ } else { /* with capacity */
+ prox = data[1] & 0x03;
+ }
+
+ if (!stylusInProx) { /* stylus not in prox */
+ if (prox) {
+ if (touchInProx) {
+ wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+ wacom->id[0] = TOUCH_DEVICE_ID;
+ if (urb->actual_length != 5) {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+ wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+ } else {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+ wacom_report_key(wcombo, BTN_TOUCH, 1);
+ }
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ touchOut = 1;
+ return 1;
+ }
+ } else {
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (touchOut || !prox) { /* force touch out-prox */
+ wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (data[0] == 2) { /* Penabled */
+ prox = data[1] & 0x20;
+
+ touchInProx = 0;
+
+ wacom->id[0] = ERASER_DEVICE_ID;
+
+ /*
+ * if going from out of proximity into proximity select between the eraser
+ * and the pen based on the state of the stylus2 button, choose eraser if
+ * pressed else choose pen. if not a proximity change from out to in, send
+ * an out of proximity for previous tool then a in for new tool.
+ */
+ if (prox) { /* in prox */
+ if (!wacom->tool[0]) {
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ if (wacom->tool[1] == BTN_TOOL_PEN)
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+ /*
+ * was entered with stylus2 pressed
+ * report out proximity for previous tool
+ */
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], 0);
+ wacom_input_sync(wcombo);
+
+ /* set new tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ return 0;
+ }
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ }
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ pressure = ((data[7] & 0x01) << 8) | data[6];
+ if (pressure < 0)
+ pressure = wacom->features->pressure_max + pressure + 1;
+ wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+ wacom_report_key(wcombo, BTN_TOUCH, pressure);
+ } else {
+ wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+ wacom_report_key(wcombo, BTN_STYLUS, 0);
+ wacom_report_key(wcombo, BTN_STYLUS2, 0);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ }
+ wacom_report_key(wcombo, wacom->tool[1], prox);
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ stylusInProx = prox;
+ wacom->tool[0] = prox;
+ return 1;
+ }
+ return 0;
+}
+
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
switch (wacom_wac->features->type) {
case PENPARTNER:
- return (wacom_penpartner_irq(wacom_wac, wcombo));
- break;
+ return wacom_penpartner_irq(wacom_wac, wcombo);
+
case PL:
- return (wacom_pl_irq(wacom_wac, wcombo));
- break;
+ return wacom_pl_irq(wacom_wac, wcombo);
+
case WACOM_G4:
case GRAPHIRE:
case WACOM_MO:
- return (wacom_graphire_irq(wacom_wac, wcombo));
- break;
+ return wacom_graphire_irq(wacom_wac, wcombo);
+
case PTU:
- return (wacom_ptu_irq(wacom_wac, wcombo));
- break;
+ return wacom_ptu_irq(wacom_wac, wcombo);
+
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
case WACOM_BEE:
- return (wacom_intuos_irq(wacom_wac, wcombo));
- break;
+ return wacom_intuos_irq(wacom_wac, wcombo);
+
+ case TABLETPC:
+ return wacom_tpc_irq(wacom_wac, wcombo);
+
default:
return 0;
}
/* fall through */
case INTUOS3S:
input_dev_i3s(input_dev, wacom_wac);
+ /* fall through */
case INTUOS:
input_dev_i(input_dev, wacom_wac);
break;
case PL:
case PTU:
+ case TABLETPC:
input_dev_pl(input_dev, wacom_wac);
- break;
+ /* fall through */
case PENPARTNER:
input_dev_pt(input_dev, wacom_wac);
break;
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
{ "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO },
{ "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO },
+ { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE },
{ "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE },
+ { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL },
+ { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
-const struct usb_device_id * get_device_table(void) {
- const struct usb_device_id * id_table = wacom_ids;
+const struct usb_device_id *get_device_table(void)
+{
+ const struct usb_device_id *id_table = wacom_ids;
+
return id_table;
}
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
int index = id - wacom_ids;
struct wacom_features *wf = &wacom_features[index];
+
return wf;
}
#define WACOM_WAC_H
#define STYLUS_DEVICE_ID 0x02
+#define TOUCH_DEVICE_ID 0x03
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
CINTIQ,
WACOM_BEE,
WACOM_MO,
+ TABLETPC,
MAX_TYPE
};
int pressure_max;
int distance_max;
int type;
+ int touch_x_max;
+ int touch_y_max;
};
struct wacom_wac {
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
- "features: %x02x, controller: 0x%02x\n",
+ "features: 0x%02x, controller: 0x%02x\n",
elo_types[(packet[1] -'0') & 0x03],
packet[5], packet[4], packet[3], packet[7]);
#include <linux/interrupt.h>
#include <linux/wm97xx.h>
#include <linux/io.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
#define VERSION "0.13"
{ "" }
};
-static struct xenbus_driver xenkbd = {
+static struct xenbus_driver xenkbd_driver = {
.name = "vkbd",
.owner = THIS_MODULE,
.ids = xenkbd_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenkbd);
+ return xenbus_register_frontend(&xenkbd_driver);
}
static void __exit xenkbd_cleanup(void)
{
- xenbus_unregister_driver(&xenkbd);
+ xenbus_unregister_driver(&xenkbd_driver);
}
module_init(xenkbd_init);
memcpy(&cards[i], &cards[i + 1], sizeof(cards[i]));
}
-static int HiSax_inithardware(int *busy_flag)
+static int __init HiSax_inithardware(int *busy_flag)
{
int foundcards = 0;
int i = 0;
printk(KERN_INFO "HiSax module removed\n");
}
-int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
+#ifdef CONFIG_HOTPLUG
+
+int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
{
u_char ids[16];
int ret = -1;
}
EXPORT_SYMBOL(hisax_init_pcmcia);
+#endif
+
EXPORT_SYMBOL(HiSax_closecard);
#include "hisax_if.h"
static void hisax_bh(struct work_struct *work);
static void EChannel_proc_rcv(struct hisax_d_if *d_if);
+static int hisax_setup_card_dynamic(struct IsdnCard *card)
+{
+ return 2;
+}
+
int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
char *name, int protocol)
{
cards[i].protocol = protocol;
sprintf(id, "%s%d", name, i);
nrcards++;
- retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
+ retval = checkcard(i, id, NULL, hisax_d_if->owner,
+ hisax_setup_card_dynamic);
if (retval == 0) { // yuck
cards[i].typ = 0;
nrcards--;
cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
}
-static int rackmeter_setup(struct rackmeter *rm)
+static int __devinit rackmeter_setup(struct rackmeter *rm)
{
pr_debug("rackmeter: setting up i2s..\n");
rackmeter_setup_i2s(rm);
{ }
};
-static struct macio_driver rackmeter_drv = {
+static struct macio_driver rackmeter_driver = {
.name = "rackmeter",
.owner = THIS_MODULE,
.match_table = rackmeter_match,
.probe = rackmeter_probe,
- .remove = rackmeter_remove,
+ .remove = __devexit_p(rackmeter_remove),
.shutdown = rackmeter_shutdown,
};
{
pr_debug("rackmeter_init()\n");
- return macio_register_driver(&rackmeter_drv);
+ return macio_register_driver(&rackmeter_driver);
}
static void __exit rackmeter_exit(void)
{
pr_debug("rackmeter_exit()\n");
- macio_unregister_driver(&rackmeter_drv);
+ macio_unregister_driver(&rackmeter_driver);
}
module_init(rackmeter_init);
pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr);
}
-static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
+static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
{
outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK));
outb(1, dm_io_mem(DM1105_CR));
if (fe->ops.set_voltage)
fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
if (fe->ops.tuner_ops.sleep) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
fe->ops.tuner_ops.sleep(fe);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
int is_legacy_delivery_system(fe_delivery_system_t s)
{
if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) ||
- (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS))
+ (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) ||
+ (s == SYS_ATSC))
return 1;
return 0;
goto error;
}
- /* firmware is running, reconnect device in the usb bus */
- req.cmd = RECONNECT_USB;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- err("reconnect failed: %d", ret);
-
error:
return ret;
}
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = af9015_download_firmware,
.firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
.size_of_priv = sizeof(struct af9015_state), \
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = af9015_download_firmware,
.firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
.size_of_priv = sizeof(struct af9015_state), \
#define REQUEST_I2C_READ 0x2
#define REQUEST_I2C_WRITE 0x3
-#define REQUEST_POLL_RC 0x4
+#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */
#define REQUEST_JUMPRAM 0x8
#define REQUEST_SET_CLOCK 0xB
#define REQUEST_SET_GPIO 0xC
u16 mt2060_if1[2];
u8 rc_toggle;
u8 rc_counter;
+ u8 rc_func_version;
u8 is_dib7000pc;
u8 fw_use_new_i2c_api;
u8 disable_streaming_master_mode;
};
+extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype);
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype)
+{
+ u8 b[16];
+ int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ REQUEST_GET_VERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ b, sizeof(b), USB_CTRL_GET_TIMEOUT);
+ *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+ *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7];
+ *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
+ *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
+ return ret;
+}
+
/* expecting rx buffer: request data[0] data[1] ... data[2] */
static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
{
}
};
+
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
.band_caps = BAND_VHF | BAND_UHF,
.setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
/* Number of keypresses to ignore before start repeating */
#define RC_REPEAT_DELAY 2
+#define RC_REPEAT_DELAY_V1_20 5
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+
+
+/* Used by firmware versions < 1.20 (deprecated) */
+static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
+ int *state)
{
u8 key[4];
int i;
return 0;
}
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+ u8 report_id;
+ u8 data_state;
+ u8 system_msb;
+ u8 system_lsb;
+ u8 data;
+ u8 not_data;
+};
+
+/* This supports the new IR response format for firmware v1.20 */
+static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
+ int *state)
+{
+ struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+ struct dib0700_state *st = d->priv;
+ struct dib0700_rc_response poll_reply;
+ u8 buf[6];
+ int i;
+ int status;
+ int actlen;
+ int found = 0;
+
+ /* Set initial results in case we exit the function early */
+ *event = 0;
+ *state = REMOTE_NO_KEY_PRESSED;
+
+ /* Firmware v1.20 provides RC data via bulk endpoint 1 */
+ status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
+ sizeof(buf), &actlen, 50);
+ if (status < 0) {
+ /* No data available (meaning no key press) */
+ return 0;
+ }
+
+ if (actlen != sizeof(buf)) {
+ /* We didn't get back the 6 byte message we expected */
+ err("Unexpected RC response size [%d]", actlen);
+ return -1;
+ }
+
+ poll_reply.report_id = buf[0];
+ poll_reply.data_state = buf[1];
+ poll_reply.system_msb = buf[2];
+ poll_reply.system_lsb = buf[3];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ /*
+ info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
+ poll_reply.report_id, poll_reply.data_state,
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ */
+
+ if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+ /* Key failed integrity check */
+ err("key failed integrity check: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ return -1;
+ }
+
+ /* Find the key in the map */
+ for (i = 0; i < d->props.rc_key_map_size; i++) {
+ if (keymap[i].custom == poll_reply.system_lsb &&
+ keymap[i].data == poll_reply.data) {
+ *event = keymap[i].event;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found == 0) {
+ err("Unknown remote controller key: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ d->last_event = 0;
+ return 0;
+ }
+
+ if (poll_reply.data_state == 1) {
+ /* New key hit */
+ st->rc_counter = 0;
+ *event = keymap[i].event;
+ *state = REMOTE_KEY_PRESSED;
+ d->last_event = keymap[i].event;
+ } else if (poll_reply.data_state == 2) {
+ /* Key repeated */
+ st->rc_counter++;
+
+ /* prevents unwanted double hits */
+ if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+ *event = d->last_event;
+ *state = REMOTE_KEY_PRESSED;
+ st->rc_counter = RC_REPEAT_DELAY_V1_20;
+ }
+ } else {
+ err("Unknown data state [%d]", poll_reply.data_state);
+ }
+
+ return 0;
+}
+
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ struct dib0700_state *st = d->priv;
+
+ /* Because some people may have improperly named firmware files,
+ let's figure out whether to use the new firmware call or the legacy
+ call based on the firmware version embedded in the file */
+ if (st->rc_func_version == 0) {
+ u32 hwver, romver, ramver, fwtype;
+ int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
+ &fwtype);
+ if (ret < 0) {
+ err("Could not determine version info");
+ return -1;
+ }
+ if (ramver < 0x10200)
+ st->rc_func_version = 1;
+ else
+ st->rc_func_version = 2;
+ }
+
+ if (st->rc_func_version == 2)
+ return dib0700_rc_query_v1_20(d, event, state);
+ else
+ return dib0700_rc_query_legacy(d, event, state);
+}
+
static struct dvb_usb_rc_key dib0700_rc_keys[] = {
/* Key codes for the tiny Pinnacle remote*/
{ 0x07, 0x00, KEY_MUTE },
static int usb_bulk_urb_init(struct usb_data_stream *stream)
{
- int i;
+ int i, j;
if ((i = usb_allocate_stream_buffers(stream,stream->props.count,
stream->props.u.bulk.buffersize)) < 0)
/* allocate the URBs */
for (i = 0; i < stream->props.count; i++) {
- if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL)
+ stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ deb_mem("not enough memory for urb_alloc_urb!.\n");
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[i]);
return -ENOMEM;
-
+ }
usb_fill_bulk_urb( stream->urb_list[i], stream->udev,
usb_rcvbulkpipe(stream->udev,stream->props.endpoint),
stream->buf_list[i],
for (i = 0; i < stream->props.count; i++) {
struct urb *urb;
int frame_offset = 0;
- if ((stream->urb_list[i] =
- usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL)
+
+ stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ deb_mem("not enough memory for urb_alloc_urb!\n");
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[i]);
return -ENOMEM;
+ }
urb = stream->urb_list[i];
[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
.name = "Hauppauge WinTV MiniStick",
.type = SMS_NOVA_B0,
- .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw",
+ .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
},
};
ISO_BUF_COUNT,
&ttusb->iso_dma_handle);
+ if (!ttusb->iso_buffer) {
+ dprintk("%s: pci_alloc_consistent - not enough memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
memset(ttusb->iso_buffer, 0,
ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT);
ttusb_setup_interfaces(ttusb);
- ttusb_alloc_iso_urbs(ttusb);
+ result = ttusb_alloc_iso_urbs(ttusb);
+ if (result < 0) {
+ dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__);
+ mutex_unlock(&ttusb->semi2c);
+ kfree(ttusb);
+ return result;
+ }
+
if (ttusb_init_controller(ttusb))
printk("ttusb_init_controller: error\n");
ISO_BUF_COUNT),
&dec->iso_dma_handle);
+ if (!dec->iso_buffer) {
+ dprintk("%s: pci_alloc_consistent - not enough memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
memset(dec->iso_buffer, 0,
ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT));
dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE,
GFP_ATOMIC, &dec->irq_dma_handle);
if(!dec->irq_buffer) {
+ usb_free_urb(dec->irq_urb);
return -ENOMEM;
}
usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe,
dprintk("Stopping isoc\n");
for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
- usb_kill_urb(dev->adev->urb[i]);
+ usb_unlink_urb(dev->adev->urb[i]);
usb_free_urb(dev->adev->urb[i]);
dev->adev->urb[i] = NULL;
}
struct em28xx *dev = urb->context;
int i;
unsigned int oldptr;
- unsigned long flags;
int period_elapsed = 0;
int status;
unsigned char *cp;
if (!length)
continue;
- spin_lock_irqsave(&dev->adev->slock, flags);
-
oldptr = dev->adev->hwptr_done_capture;
+ if (oldptr + length >= runtime->buffer_size) {
+ unsigned int cnt =
+ runtime->buffer_size - oldptr;
+ memcpy(runtime->dma_area + oldptr * stride, cp,
+ cnt * stride);
+ memcpy(runtime->dma_area, cp + cnt * stride,
+ length * stride - cnt * stride);
+ } else {
+ memcpy(runtime->dma_area + oldptr * stride, cp,
+ length * stride);
+ }
+
+ snd_pcm_stream_lock(substream);
+
dev->adev->hwptr_done_capture += length;
if (dev->adev->hwptr_done_capture >=
runtime->buffer_size)
period_elapsed = 1;
}
- spin_unlock_irqrestore(&dev->adev->slock, flags);
-
- if (oldptr + length >= runtime->buffer_size) {
- unsigned int cnt =
- runtime->buffer_size - oldptr;
- memcpy(runtime->dma_area + oldptr * stride, cp,
- cnt * stride);
- memcpy(runtime->dma_area, cp + cnt * stride,
- length * stride - cnt * stride);
- } else {
- memcpy(runtime->dma_area + oldptr * stride, cp,
- length * stride);
- }
+ snd_pcm_stream_unlock(substream);
}
if (period_elapsed)
snd_pcm_period_elapsed(substream);
int ret, byte;
if (dev->state & DEV_DISCONNECTED)
- return(-ENODEV);
+ return -ENODEV;
+
+ if (len > URB_MAX_CTRL_SIZE)
+ return -EINVAL;
em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
+ mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, buf, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, HZ);
+ if (ret < 0) {
+ if (reg_debug)
+ printk(" failed!\n");
+ mutex_unlock(&dev->ctrl_urb_lock);
+ return ret;
+ }
+
+ if (len)
+ memcpy(buf, dev->urb_buf, len);
+
+ mutex_unlock(&dev->ctrl_urb_lock);
if (reg_debug) {
- printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
+ printk("%02x values: ", ret);
for (byte = 0; byte < len; byte++)
printk(" %02x", (unsigned char)buf[byte]);
-
printk("\n");
}
em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
+ mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, &val, 1, HZ);
-
- if (reg_debug)
- printk(ret < 0 ? " failed!\n" :
- "%02x\n", (unsigned char) val);
+ 0x0000, reg, dev->urb_buf, 1, HZ);
+ val = dev->urb_buf[0];
+ mutex_unlock(&dev->ctrl_urb_lock);
- if (ret < 0)
+ if (ret < 0) {
+ printk(" failed!\n");
return ret;
+ }
+
+ if (reg_debug)
+ printk("%02x\n", (unsigned char) val);
return val;
}
{
int ret;
- /*usb_control_msg seems to expect a kmalloced buffer */
- unsigned char *bufs;
-
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
- if (len < 1)
+ if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
return -EINVAL;
- bufs = kmalloc(len, GFP_KERNEL);
-
em28xx_regdbg("req=%02x reg=%02x:", req, reg);
-
if (reg_debug) {
int i;
for (i = 0; i < len; ++i)
printk("\n");
}
- if (!bufs)
- return -ENOMEM;
- memcpy(bufs, buf, len);
+ mutex_lock(&dev->ctrl_urb_lock);
+ memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, bufs, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, HZ);
+ mutex_unlock(&dev->ctrl_urb_lock);
+
if (dev->wait_after_write)
msleep(dev->wait_after_write);
- kfree(bufs);
return ret;
}
break;
case EM28XX_AMUX_LINE_IN:
input = EM28XX_AUDIO_SRC_LINE;
+ video = disable;
+ line = enable;
break;
case EM28XX_AMUX_AC97_VIDEO:
input = EM28XX_AUDIO_SRC_LINE;
/* Check if board has eeprom */
err = i2c_master_recv(&dev->i2c_client, &buf, 0);
if (err < 0) {
- em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n",
- __func__, err);
- return err;
+ em28xx_errdev("board has no eeprom\n");
+ memset(eedata, 0, len);
+ return -ENODEV;
}
buf = 0;
dev->i2c_client.adapter = &dev->i2c_adap;
retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
- if (retval < 0) {
+ if ((retval < 0) && (retval != -ENODEV)) {
em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
__func__, retval);
+
return retval;
}
if (i2c_scan)
em28xx_do_i2c_scan(dev);
+
return 0;
}
MODULE_LICENSE("GPL");
static LIST_HEAD(em28xx_devlist);
+static DEFINE_MUTEX(em28xx_devlist_mutex);
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
struct em28xx_fh *fh;
enum v4l2_buf_type fh_type = 0;
- lock_kernel();
+ mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(h, &em28xx_devlist, devlist) {
if (h->vdev->minor == minor) {
dev = h;
dev = h;
}
}
- if (NULL == dev) {
- unlock_kernel();
+ mutex_unlock(&em28xx_devlist_mutex);
+ if (NULL == dev)
return -ENODEV;
- }
+
+ mutex_lock(&dev->lock);
em28xx_videodbg("open minor=%d type=%s users=%d\n",
minor, v4l2_type_names[fh_type], dev->users);
fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL);
if (!fh) {
em28xx_errdev("em28xx-video.c: Out of memory?!\n");
- unlock_kernel();
+ mutex_unlock(&dev->lock);
return -ENOMEM;
}
- mutex_lock(&dev->lock);
fh->dev = dev;
fh->radio = radio;
fh->type = fh_type;
sizeof(struct em28xx_buffer), fh);
mutex_unlock(&dev->lock);
- unlock_kernel();
return errCode;
}
{
struct em28xx *dev = NULL;
+ mutex_lock(&em28xx_devlist_mutex);
mutex_lock(&em28xx_extension_devlist_lock);
list_add_tail(&ops->next, &em28xx_extension_devlist);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
}
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
{
struct em28xx *dev = NULL;
+ mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
if (dev)
ops->fini(dev);
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
list_del(&ops->next);
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
}
EXPORT_SYMBOL(em28xx_unregister_extension);
}
+static int register_analog_devices(struct em28xx *dev)
+{
+ int ret;
+
+ /* allocate and fill video video_device struct */
+ dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
+ if (!dev->vdev) {
+ em28xx_errdev("cannot allocate video_device.\n");
+ return -ENODEV;
+ }
+
+ /* register v4l2 video video_device */
+ ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
+ video_nr[dev->devno]);
+ if (ret) {
+ em28xx_errdev("unable to register video device (error=%i).\n",
+ ret);
+ return ret;
+ }
+
+ /* Allocate and fill vbi video_device struct */
+ dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
+
+ /* register v4l2 vbi video_device */
+ ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+ vbi_nr[dev->devno]);
+ if (ret < 0) {
+ em28xx_errdev("unable to register vbi device\n");
+ return ret;
+ }
+
+ if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
+ dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
+ if (!dev->radio_dev) {
+ em28xx_errdev("cannot allocate video_device.\n");
+ return -ENODEV;
+ }
+ ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
+ radio_nr[dev->devno]);
+ if (ret < 0) {
+ em28xx_errdev("can't register radio device\n");
+ return ret;
+ }
+ em28xx_info("Registered radio device as /dev/radio%d\n",
+ dev->radio_dev->num);
+ }
+
+ em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
+ dev->vdev->num, dev->vbi_dev->num);
+
+ return 0;
+}
+
+
/*
* em28xx_init_dev()
* allocates and inits the device structs, registers i2c bus and v4l device
dev->udev = udev;
mutex_init(&dev->lock);
+ mutex_init(&dev->ctrl_urb_lock);
spin_lock_init(&dev->slock);
init_waitqueue_head(&dev->open);
init_waitqueue_head(&dev->wait_frame);
errCode = em28xx_config(dev);
if (errCode) {
em28xx_errdev("error configuring device\n");
- em28xx_devused &= ~(1<<dev->devno);
- kfree(dev);
return -ENOMEM;
}
return errCode;
}
- list_add_tail(&dev->devlist, &em28xx_devlist);
-
- /* allocate and fill video video_device struct */
- dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
- if (NULL == dev->vdev) {
- em28xx_errdev("cannot allocate video_device.\n");
- goto fail_unreg;
- }
-
- /* register v4l2 video video_device */
- retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
- video_nr[dev->devno]);
- if (retval) {
- em28xx_errdev("unable to register video device (error=%i).\n",
- retval);
- goto fail_unreg;
- }
-
- /* Allocate and fill vbi video_device struct */
- dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
- /* register v4l2 vbi video_device */
- if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
- vbi_nr[dev->devno]) < 0) {
- em28xx_errdev("unable to register vbi device\n");
- retval = -ENODEV;
- goto fail_unreg;
- }
-
- if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
- dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
- if (NULL == dev->radio_dev) {
- em28xx_errdev("cannot allocate video_device.\n");
- goto fail_unreg;
- }
- retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
- radio_nr[dev->devno]);
- if (retval < 0) {
- em28xx_errdev("can't register radio device\n");
- goto fail_unreg;
- }
- em28xx_info("Registered radio device as /dev/radio%d\n",
- dev->radio_dev->num);
- }
-
/* init video dma queues */
INIT_LIST_HEAD(&dev->vidq.active);
INIT_LIST_HEAD(&dev->vidq.queued);
video_mux(dev, 0);
- em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
- dev->vdev->num, dev->vbi_dev->num);
+ mutex_lock(&em28xx_devlist_mutex);
+ list_add_tail(&dev->devlist, &em28xx_devlist);
+ retval = register_analog_devices(dev);
+ if (retval < 0) {
+ em28xx_release_resources(dev);
+ mutex_unlock(&em28xx_devlist_mutex);
+ goto fail_reg_devices;
+ }
mutex_lock(&em28xx_extension_devlist_lock);
if (!list_empty(&em28xx_extension_devlist)) {
}
}
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
return 0;
-fail_unreg:
- em28xx_release_resources(dev);
+fail_reg_devices:
mutex_unlock(&dev->lock);
- kfree(dev);
return retval;
}
/* allocate device struct */
retval = em28xx_init_dev(&dev, udev, nr);
- if (retval)
+ if (retval) {
+ em28xx_devused &= ~(1<<dev->devno);
+ kfree(dev);
+
return retval;
+ }
em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
#define EM28XX_MIN_BUF 4
#define EM28XX_DEF_BUF 8
+/*Limits the max URB message size */
+#define URB_MAX_CTRL_SIZE 80
+
/* Params for validated field */
#define EM28XX_BOARD_NOT_VALIDATED 1
#define EM28XX_BOARD_VALIDATED 0
/* locks */
struct mutex lock;
+ struct mutex ctrl_urb_lock; /* protects urb_buf */
/* spinlock_t queue_lock; */
struct list_head inqueue, outqueue;
wait_queue_head_t open, wait_frame, wait_stream;
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */
char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */
+ char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */
+
/* helper funcs that call usb_control_msg */
int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
char *buf, int len);
return 0;
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
int retry = 50;
+ if (!gspca_dev->present)
+ return;
reg_w_val(gspca_dev, 0x0000, 0x00);
reg_r(gspca_dev, 0x0002, 1);
reg_w_val(gspca_dev, 0x0053, 0x00);
/* Stop the state machine */
if (dev->state != FPIX_NOP)
wait_for_completion(&dev->can_close);
+}
+
+/* called on streamoff with alt 0 and disconnect */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
usb_free_urb(dev->control_urb);
dev->control_urb = NULL;
error:
/* Free the ressources */
sd_stopN(gspca_dev);
+ sd_stop0(gspca_dev);
return ret;
}
.init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
+ .stop0 = sd_stop0,
};
/* -- device connect -- */
{
gspca_dev->streaming = 0;
atomic_set(&gspca_dev->nevent, 0);
- if (gspca_dev->present) {
- if (gspca_dev->sd_desc->stopN)
- gspca_dev->sd_desc->stopN(gspca_dev);
- destroy_urbs(gspca_dev);
- gspca_set_alt0(gspca_dev);
- if (gspca_dev->sd_desc->stop0)
- gspca_dev->sd_desc->stop0(gspca_dev);
- PDEBUG(D_STREAM, "stream off OK");
- }
+ if (gspca_dev->present
+ && gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
+ destroy_urbs(gspca_dev);
+ gspca_set_alt0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
+ PDEBUG(D_STREAM, "stream off OK");
}
static void gspca_set_default_mode(struct gspca_dev *gspca_dev)
int ret;
PDEBUG(D_STREAM, "%s open", current->comm);
- gspca_dev = (struct gspca_dev *) video_devdata(file);
+ gspca_dev = video_drvdata(file);
if (mutex_lock_interruptible(&gspca_dev->queue_lock))
return -ERESTARTSYS;
if (!gspca_dev->present) {
ret = -EBUSY;
goto out;
}
+
+ /* protect the subdriver against rmmod */
+ if (!try_module_get(gspca_dev->module)) {
+ ret = -ENODEV;
+ goto out;
+ }
+
gspca_dev->users++;
/* one more user */
#ifdef GSPCA_DEBUG
/* activate the v4l2 debug */
if (gspca_debug & D_V4L2)
- gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL
+ gspca_dev->vdev->debug |= V4L2_DEBUG_IOCTL
| V4L2_DEBUG_IOCTL_ARG;
else
- gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL
+ gspca_dev->vdev->debug &= ~(V4L2_DEBUG_IOCTL
| V4L2_DEBUG_IOCTL_ARG);
#endif
ret = 0;
gspca_dev->memory = GSPCA_MEMORY_NO;
}
file->private_data = NULL;
+ module_put(gspca_dev->module);
mutex_unlock(&gspca_dev->queue_lock);
PDEBUG(D_STREAM, "close done");
return ret;
}
-static void dev_release(struct video_device *vfd)
-{
- /* nothing */
-}
-
static struct file_operations dev_fops = {
.owner = THIS_MODULE,
.open = dev_open,
.name = "gspca main driver",
.fops = &dev_fops,
.ioctl_ops = &dev_ioctl_ops,
- .release = dev_release, /* mandatory */
+ .release = video_device_release,
.minor = -1,
};
init_waitqueue_head(&gspca_dev->wq);
/* init video stuff */
- memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template);
- gspca_dev->vdev.parent = &dev->dev;
- memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops);
- gspca_dev->vdev.fops = &gspca_dev->fops;
- gspca_dev->fops.owner = module; /* module protection */
+ gspca_dev->vdev = video_device_alloc();
+ memcpy(gspca_dev->vdev, &gspca_template, sizeof gspca_template);
+ gspca_dev->vdev->parent = &dev->dev;
+ gspca_dev->module = module;
gspca_dev->present = 1;
- ret = video_register_device(&gspca_dev->vdev,
+ video_set_drvdata(gspca_dev->vdev, gspca_dev);
+ ret = video_register_device(gspca_dev->vdev,
VFL_TYPE_GRABBER,
video_nr);
if (ret < 0) {
err("video_register_device err %d", ret);
+ video_device_release(gspca_dev->vdev);
goto out;
}
PDEBUG(D_PROBE, "probe ok");
return 0;
out:
- kref_put(&gspca_dev->kref, gspca_delete);
+ kfree(gspca_dev->usb_buf);
+ kfree(gspca_dev);
return ret;
}
EXPORT_SYMBOL(gspca_dev_probe);
usb_set_intfdata(intf, NULL);
/* We don't want people trying to open up the device */
- video_unregister_device(&gspca_dev->vdev);
+ video_unregister_device(gspca_dev->vdev);
gspca_dev->present = 0;
gspca_dev->streaming = 0;
cam_pkt_op pkt_scan;
/* optional operations */
cam_v_op stopN; /* called on stream off - main alt */
- cam_v_op stop0; /* called on stream off - alt 0 */
+ cam_v_op stop0; /* called on stream off & disconnect - alt 0 */
cam_v_op dq_callback; /* called when a frame has been dequeued */
cam_jpg_op get_jcomp;
cam_jpg_op set_jcomp;
};
struct gspca_dev {
- struct video_device vdev; /* !! must be the first item */
- struct file_operations fops;
+ struct video_device *vdev;
+ struct module *module; /* subdriver handling the device */
struct usb_device *dev;
struct kref kref;
struct file *capt_file; /* file doing video capture */
reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
if (sd->sensor == SENSOR_PAC7302) {
reg_w(gspca_dev, 0xff, 0x01);
reg_w(gspca_dev, 0x78, 0x40);
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x01, 0x00);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
+ if (!gspca_dev->present)
+ return;
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
}
reg_write(gspca_dev->dev, 0x02, 0x00, 0x00);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
+ if (!gspca_dev->present)
+ return;
+
/* This maybe reset or power control */
reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
reg_write(gspca_dev->dev, 0x03, 0x01, 0x0);
}
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
if (sd->chip_revision == Rev012A) {
reg_w_val(gspca_dev->dev, 0x8118, 0x29);
reg_w_val(gspca_dev->dev, 0x8114, 0x08);
reg_w(dev, 0xa0, 0x09, 0xb003);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct usb_device *dev = gspca_dev->dev;
+ if (!gspca_dev->present)
+ return;
reg_w(dev, 0x89, 0xffff, 0xffff);
}
return 0;
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
send_unknown(gspca_dev->dev, sd->sensor);
}
#include <mach/pxa-regs.h>
#include <mach/camera.h>
+#include "pxa_camera.h"
+
#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
#define PXA_CAM_DRV_NAME "pxa27x-camera"
--- /dev/null
+/* Camera Interface */
+#define CICR0 __REG(0x50000000)
+#define CICR1 __REG(0x50000004)
+#define CICR2 __REG(0x50000008)
+#define CICR3 __REG(0x5000000C)
+#define CICR4 __REG(0x50000010)
+#define CISR __REG(0x50000014)
+#define CIFR __REG(0x50000018)
+#define CITOR __REG(0x5000001C)
+#define CIBR0 __REG(0x50000028)
+#define CIBR1 __REG(0x50000030)
+#define CIBR2 __REG(0x50000038)
+
+#define CICR0_DMAEN (1 << 31) /* DMA request enable */
+#define CICR0_PAR_EN (1 << 30) /* Parity enable */
+#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
+#define CICR0_ENB (1 << 28) /* Camera interface enable */
+#define CICR0_DIS (1 << 27) /* Camera interface disable */
+#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
+#define CICR0_TOM (1 << 9) /* Time-out mask */
+#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
+#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
+#define CICR0_EOLM (1 << 6) /* End-of-line mask */
+#define CICR0_PERRM (1 << 5) /* Parity-error mask */
+#define CICR0_QDM (1 << 4) /* Quick-disable mask */
+#define CICR0_CDM (1 << 3) /* Disable-done mask */
+#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
+#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
+#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
+
+#define CICR1_TBIT (1 << 31) /* Transparency bit */
+#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */
+#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
+#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
+#define CICR1_RGB_F (1 << 11) /* RGB format */
+#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
+#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
+#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
+#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
+#define CICR1_DW (0x7 << 0) /* Data width mask */
+
+#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
+ wait count mask */
+#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
+ wait count mask */
+#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
+#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
+ wait count mask */
+#define CICR2_FSW (0x7 << 0) /* Frame stabilization
+ wait count mask */
+
+#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
+ wait count mask */
+#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
+ wait count mask */
+#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
+#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
+ wait count mask */
+#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
+
+#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
+#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
+#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
+#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
+#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
+#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
+#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
+
+#define CISR_FTO (1 << 15) /* FIFO time-out */
+#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
+#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
+#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
+#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
+#define CISR_EOL (1 << 8) /* End of line */
+#define CISR_PAR_ERR (1 << 7) /* Parity error */
+#define CISR_CQD (1 << 6) /* Camera interface quick disable */
+#define CISR_CDD (1 << 5) /* Camera interface disable done */
+#define CISR_SOF (1 << 4) /* Start of frame */
+#define CISR_EOF (1 << 3) /* End of frame */
+#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
+#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
+#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
+#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
+#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
+#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
+#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
+#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
+#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
+
#define S2255_FW_FAILED 3
#define S2255_FW_DISCONNECTING 4
-#define S2255_FW_MARKER 0x22552f2f
+#define S2255_FW_MARKER cpu_to_le32(0x22552f2f)
/* 2255 read states */
#define S2255_READ_IDLE 0
#define S2255_READ_FRAME 1
u16 dir_reg[ASIC3_NUM_GPIO_BANKS];
int i;
- memzero(alt_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
- memzero(out_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
- memzero(dir_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+ memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+ memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+ memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
/* Enable all GPIOs */
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff);
#include <linux/slab.h>
#include <linux/string.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <asm/system.h>
#include "mcp.h"
#include <linux/slab.h>
#include <linux/platform_device.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/system.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include "ucb1x00.h"
#include <linux/device.h>
#include <linux/mutex.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/hardware.h>
#include "ucb1x00.h"
#include <linux/slab.h>
#include <linux/kthread.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/collie.h>
#include <asm/mach-types.h>
goto outinput;
}
- if (!acpi_video_backlight_support()) {
- printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+ if (acpi_video_backlight_support()) {
+ printk(KERN_INFO DRV_PFX "brightness ignored, must be "
"controlled by ACPI video driver\n");
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&handle))) {
static u8 fan_control_initial_status;
static u8 fan_control_desired_level;
+static u8 fan_control_resume_level;
static int fan_watchdog_maxinterval;
static struct mutex fan_mutex;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- if ((level != TP_EC_FAN_AUTO) &&
- (level != TP_EC_FAN_FULLSPEED) &&
+ if (!(level & TP_EC_FAN_AUTO) &&
+ !(level & TP_EC_FAN_FULLSPEED) &&
((level < 0) || (level > 7)))
return -EINVAL;
static void fan_suspend(pm_message_t state)
{
+ int rc;
+
if (!fan_control_allowed)
return;
/* Store fan status in cache */
- fan_get_status_safe(NULL);
+ fan_control_resume_level = 0;
+ rc = fan_get_status_safe(&fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to read fan level for later "
+ "restore during resume: %d\n", rc);
+
+ /* if it is undefined, don't attempt to restore it.
+ * KEEP THIS LAST */
if (tp_features.fan_ctrl_status_undef)
- fan_control_desired_level = TP_EC_FAN_AUTO;
+ fan_control_resume_level = 0;
}
static void fan_resume(void)
{
- u8 saved_fan_level;
u8 current_level = 7;
bool do_set = false;
+ int rc;
/* DSDT *always* updates status on resume */
tp_features.fan_ctrl_status_undef = 0;
- saved_fan_level = fan_control_desired_level;
if (!fan_control_allowed ||
+ !fan_control_resume_level ||
(fan_get_status_safe(¤t_level) < 0))
return;
switch (fan_control_access_mode) {
case TPACPI_FAN_WR_ACPI_SFAN:
- do_set = (saved_fan_level > current_level);
+ /* never decrease fan level */
+ do_set = (fan_control_resume_level > current_level);
break;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
- (saved_fan_level == 7 &&
- !(current_level & TP_EC_FAN_FULLSPEED)));
+ /* never decrease fan level, scale is:
+ * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO
+ *
+ * We expect the firmware to set either 7 or AUTO, but we
+ * handle FULLSPEED out of paranoia.
+ *
+ * So, we can safely only restore FULLSPEED or 7, anything
+ * else could slow the fan. Restoring AUTO is useless, at
+ * best that's exactly what the DSDT already set (it is the
+ * slower it uses).
+ *
+ * Always keep in mind that the DSDT *will* have set the
+ * fans to what the vendor supposes is the best level. We
+ * muck with it only to speed the fan up.
+ */
+ if (fan_control_resume_level != 7 &&
+ !(fan_control_resume_level & TP_EC_FAN_FULLSPEED))
+ return;
+ else
+ do_set = !(current_level & TP_EC_FAN_FULLSPEED) &&
+ (current_level != fan_control_resume_level);
break;
default:
return;
if (do_set) {
printk(TPACPI_NOTICE
"restoring fan level to 0x%02x\n",
- saved_fan_level);
- fan_set_level_safe(saved_fan_level);
+ fan_control_resume_level);
+ rc = fan_set_level_safe(fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to restore fan level: %d\n", rc);
}
}
}
host = mmc_priv(mmc);
- host->clk = clk_get(&dev->dev, "MCLK");
+ host->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
host->clk = NULL;
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mmc/host.h>
+#include <linux/io.h>
-#include <asm/dma.h>
-#include <asm/io.h>
#include <asm/sizes.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/mmc.h>
#include <mach/regs-sdi.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/mci.h>
+#include <plat/mci.h>
#include "s3cmci.h"
*/
static void nw_en_write(void)
{
- extern spinlock_t gpio_lock;
unsigned long flags;
/*
* we want to write a bit pattern XXX1 to Xilinx to enable
* the write gate, which will be open for about the next 2ms.
*/
- spin_lock_irqsave(&gpio_lock, flags);
- cpld_modify(1, 1);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
/*
* let the ISA bus to catch on...
err = -ENOMEM;
goto Error;
}
- memzero(info, sizeof(struct ixp2000_flash_info));
+ memset(info, 0, sizeof(struct ixp2000_flash_info));
platform_set_drvdata(dev, info);
err = -ENOMEM;
goto Error;
}
- memzero(info, sizeof(struct ixp4xx_flash_info));
+ memset(info, 0, sizeof(struct ixp4xx_flash_info));
platform_set_drvdata(dev, info);
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/pxa-regs.h>
#include <mach/pxa3xx_nand.h>
#include <asm/io.h>
-#include <asm/plat-s3c/regs-nand.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/regs-nand.h>
+#include <plat/nand.h>
#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
static int hardware_ecc = 1;
goto exit_error;
}
- memzero(info, sizeof(*info));
+ memset(info, 0, sizeof(*info));
platform_set_drvdata(pdev, info);
spin_lock_init(&info->controller.lock);
goto exit_error;
}
- memzero(info->mtds, size);
+ memset(info->mtds, 0, size);
/* initialise all possible chips */
}
/*
- * OK, now the LEB is locked and we can safely start moving iy. Since
+ * OK, now the LEB is locked and we can safely start moving it. Since
* this function utilizes thie @ubi->peb1_buf buffer which is shared
* with some other functions, so lock the buffer by taking the
* @ubi->buf_mutex.
}
err = ubi_io_read_data(ubi, buf, pnum, 0, len);
- if (err && err != UBI_IO_BITFLIPS)
+ if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
goto out_free_buf;
data_crc = be32_to_cpu(vid_hdr->data_crc);
ubi_msg("%s: %d consecutive failures",
ubi->bgt_name, WL_MAX_FAILURES);
ubi_ro_mode(ubi);
- break;
+ ubi->thread_enabled = 0;
+ continue;
}
} else
failures = 0;
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
+ depends on PPC_MPC52xx && PPC_BESTCOMM
select CRC32
select PHYLIB
+ select PPC_BESTCOMM_FEC
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
/* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps
them to system IRQ numbers. This mapping is card specific and is set to
the configuration of the Cirrus Eval board for this chip. */
-#ifdef CONFIG_ARCH_CLPS7500
-static unsigned int netcard_portlist[] __used __initdata =
- { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
-static unsigned int cs8900_irq_map[] = {12,0,0,0};
-#elif defined(CONFIG_SH_HICOSH4)
+#if defined(CONFIG_SH_HICOSH4)
static unsigned int netcard_portlist[] __used __initdata =
{ 0x0300, 0};
static unsigned int cs8900_irq_map[] = {1,0,0,0};
#include <net/irda/wrapper.h>
#include <net/irda/irda_device.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/irda.h>
+#include <mach/hardware.h>
#include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
+
+#define FICP __REG(0x40800000) /* Start of FICP area */
+#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
+#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
+#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
+#define ICDR __REG(0x4080000c) /* ICP Data Register */
+#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
+#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
+
+#define ICCR0_AME (1 << 7) /* Address match enable */
+#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
+#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
+#define ICCR0_RXE (1 << 4) /* Receive enable */
+#define ICCR0_TXE (1 << 3) /* Transmit enable */
+#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
+#define ICCR0_LBM (1 << 1) /* Loopback mode */
+#define ICCR0_ITR (1 << 0) /* IrDA transmission */
+
+#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
+#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
+#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
+#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
+#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE (1 << 5) /* Framing error */
+#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
+#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
+#define ICSR0_RAB (1 << 2) /* Receiver abort */
+#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
+#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
+
+#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
+#define ICSR1_CRE (1 << 5) /* CRC error */
+#define ICSR1_EOF (1 << 4) /* End of frame */
+#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
+#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
+#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
+#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0
#include <net/irda/irda_device.h>
#include <asm/irq.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/hardware.h>
#include <asm/mach/irda.h>
* Once we know the feature-set enabled for the device, we'll cache
* the register offset the descriptor ring is assigned to.
**/
-static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
{
int feature_mask = 0, rss_i;
int i, txr_idx, rxr_idx;
* number of queues at compile-time. The polling_netdev array is
* intended for Multiqueue, but should work fine with a single queue.
**/
-static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
{
int i;
* Attempt to configure the interrupts using the best available
* capabilities of the hardware and the kernel.
**/
-static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
- *adapter)
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
{
int err = 0;
int vector, v_budget;
* - Hardware queue count (num_*_queues)
* - defined by miscellaneous hardware support/features (RSS, etc.)
**/
-static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
{
int err;
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
int port;
+ __be32 ib_port_default_caps;
err = mlx4_init_uar_table(dev);
if (err) {
}
for (port = 1; port <= dev->caps.num_ports; port++) {
+ ib_port_default_caps = 0;
+ err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps);
+ if (err)
+ mlx4_warn(dev, "failed to get port %d default "
+ "ib capabilities (%d). Continuing with "
+ "caps = 0\n", port, err);
+ dev->caps.ib_port_def_cap[port] = ib_port_default_caps;
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, aborting\n",
void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table);
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps);
#endif /* MLX4_H */
}
EXPORT_SYMBOL_GPL(mlx4_unregister_vlan);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps)
+{
+ struct mlx4_cmd_mailbox *inmailbox, *outmailbox;
+ u8 *inbuf, *outbuf;
+ int err;
+
+ inmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inmailbox))
+ return PTR_ERR(inmailbox);
+
+ outmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outmailbox)) {
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ return PTR_ERR(outmailbox);
+ }
+
+ inbuf = inmailbox->buf;
+ outbuf = outmailbox->buf;
+ memset(inbuf, 0, 256);
+ memset(outbuf, 0, 256);
+ inbuf[0] = 1;
+ inbuf[1] = 1;
+ inbuf[2] = 1;
+ inbuf[3] = 1;
+ *(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015);
+ *(__be32 *) (&inbuf[20]) = cpu_to_be32(port);
+
+ err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C);
+ if (!err)
+ *caps = *(__be32 *) (outbuf + 84);
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ mlx4_free_cmd_mailbox(dev, outmailbox);
+ return err;
+}
+
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port)
{
struct mlx4_cmd_mailbox *mailbox;
((u8 *) mailbox->buf)[3] = 6;
((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15);
((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15);
- }
+ } else
+ ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port];
err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT,
MLX4_CMD_TIME_CLASS_B);
return 0;
}
-static int ibmtr_resume(struct pcmcia_device *link)
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
struct net_device *dev = info->dev;
* This routine has a simple purpose -- make the SMC chip generate an
* interrupt, so an auto-detect routine can detect it, and find the IRQ,
*/
-static int __init smc911x_findirq(struct net_device *dev)
+static int __devinit smc911x_findirq(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc911x_probe(struct net_device *dev)
+static int __devinit smc911x_probe(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int i, retval;
* 0 --> there is a device
* anything else, error
*/
-static int smc911x_drv_probe(struct platform_device *pdev)
+static int __devinit smc911x_drv_probe(struct platform_device *pdev)
{
#ifdef SMC_DYNAMIC_BUS_CONFIG
struct smc911x_platdata *pd = pdev->dev.platform_data;
return ret;
}
-static int smc911x_drv_remove(struct platform_device *pdev)
+static int __devexit smc911x_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc911x_local *lp = netdev_priv(ndev);
static struct platform_driver smc911x_driver = {
.probe = smc911x_drv_probe,
- .remove = smc911x_drv_remove,
+ .remove = __devexit_p(smc911x_drv_remove),
.suspend = smc911x_drv_suspend,
.resume = smc911x_drv_resume,
.driver = {
#ifdef SMC_USE_PXA_DMA
+
+#include <mach/dma.h>
+
/*
* Define the request and free functions
* These are unfortunately architecture specific as no generic allocation
* I just deleted auto_irq.c, since it was never built...
* --jgarzik
*/
-static int __init smc_findirq(struct smc_local *lp)
+static int __devinit smc_findirq(struct smc_local *lp)
{
void __iomem *ioaddr = lp->base;
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
unsigned long irq_flags)
{
struct smc_local *lp = netdev_priv(dev);
* 0 --> there is a device
* anything else, error
*/
-static int smc_drv_probe(struct platform_device *pdev)
+static int __devinit smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = pdev->dev.platform_data;
struct smc_local *lp;
return ret;
}
-static int smc_drv_remove(struct platform_device *pdev)
+static int __devexit smc_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc_local *lp = netdev_priv(ndev);
static struct platform_driver smc_driver = {
.probe = smc_drv_probe,
- .remove = smc_drv_remove,
+ .remove = __devexit_p(smc_drv_remove),
.suspend = smc_drv_suspend,
.resume = smc_drv_resume,
.driver = {
* as RX which can overrun memory and lose packets.
*/
#include <linux/dma-mapping.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#ifdef SMC_insl
return 0;
}
-static struct xenbus_driver netfront = {
+static struct xenbus_driver netfront_driver = {
.name = "vif",
.owner = THIS_MODULE,
.ids = netfront_ids,
printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
- return xenbus_register_frontend(&netfront);
+ return xenbus_register_frontend(&netfront_driver);
}
module_init(netif_init);
if (xen_initial_domain())
return;
- xenbus_unregister_driver(&netfront);
+ xenbus_unregister_driver(&netfront_driver);
}
module_exit(netif_exit);
* parallel ports and <S> is the number of serial ports.
*/
card->numports = (dev->subsystem_device & 0xf0) >> 4;
+ if (card->numports > ARRAY_SIZE(card->addr))
+ card->numports = ARRAY_SIZE(card->addr);
return 0;
}
return 0;
}
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int __devinit rio_enum_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int rc = 0;
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int __devinit rio_disc_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int enum_timeout_flag = 0;
device_initcall(rio_init);
-int rio_init_mports(void)
+int __devinit rio_init_mports(void)
{
int rc = 0;
struct rio_mport *port;
#include <mach/board.h>
#include <mach/at91_rtt.h>
+#include <mach/cpu.h>
/*
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/plat-s3c/regs-rtc.h>
+#include <plat/regs-rtc.h>
/* I have yet to find an S3C implementation with more than one
* of these rtc blocks in */
advansys_wide_free_mem(boardp);
free_irq(boardp->irq, shost);
err_free_dma:
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA)
free_dma(shost->dma_channel);
+#endif
err_free_proc:
kfree(boardp->prtbuf);
err_unmap:
ASC_DBG(1, "begin\n");
scsi_remove_host(shost);
free_irq(board->irq, shost);
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA) {
ASC_DBG(1, "free_dma()\n");
free_dma(shost->dma_channel);
}
+#endif
if (ASC_NARROW_BOARD(board)) {
dma_unmap_single(board->dev,
board->dvc_var.asc_dvc_var.overrun_dma,
.remove = gdth_pci_remove_one,
};
-static void gdth_pci_remove_one(struct pci_dev *pdev)
+static void __devexit gdth_pci_remove_one(struct pci_dev *pdev)
{
gdth_ha_str *ha = pci_get_drvdata(pdev);
pci_disable_device(pdev);
}
-static int gdth_pci_init_one(struct pci_dev *pdev,
+static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
ushort vendor = pdev->vendor;
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
gdth_ha_str *ha)
{
register gdt6_dpram_str __iomem *dp6_ptr;
/* controller protocol functions */
-static void __init gdth_enable_int(gdth_ha_str *ha)
+static void __devinit gdth_enable_int(gdth_ha_str *ha)
{
ulong flags;
gdt2_dpram_str __iomem *dp2_ptr;
/* search for devices */
-static int __init gdth_search_drives(gdth_ha_str *ha)
+static int __devinit gdth_search_drives(gdth_ha_str *ha)
{
ushort cdev_cnt, i;
int ok;
#endif /* CONFIG_EISA */
#ifdef CONFIG_PCI
-static int gdth_pci_probe_one(gdth_pci_str *pcistr,
+static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr,
gdth_ha_str **ha_out)
{
struct Scsi_Host *shp;
goto free;
}
- uap->clk = clk_get(&dev->dev, "UARTCLK");
+ uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
ret = PTR_ERR(uap->clk);
goto unmap;
goto free;
}
- uap->clk = clk_get(&dev->dev, "UARTCLK");
+ uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
ret = PTR_ERR(uap->clk);
goto unmap;
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
struct uart_pxa_port {
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
+#include <mach/hardware.h>
#define DEV_MAJOR 204
#define DEV_MINOR 16
static int ulite_request_port(struct uart_port *port)
{
- pr_debug("ulite console: port=%p; port->mapbase=%x\n",
- port, port->mapbase);
+ pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+ port, (unsigned long long) port->mapbase);
if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
dev_err(port->dev, "Memory region busy\n");
dma_rx_addr = t->rx_dma;
/*
- * check if buffers are already dma mapped, map them otherwise
+ * check if buffers are already dma mapped, map them otherwise:
+ * - first map the TX buffer, so cache data gets written to memory
+ * - then map the RX buffer, so that cache entries (with
+ * soon-to-be-stale data) get removed
* use rx buffer in place of tx if tx buffer was not provided
* use temp rx buffer (preallocated or realloc to fit) for rx dma
*/
+ if (t->tx_buf) {
+ if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
+ dma_tx_addr = dma_map_single(hw->dev,
+ (void *)t->tx_buf,
+ t->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(hw->dev, dma_tx_addr))
+ dev_err(hw->dev, "tx dma map error\n");
+ }
+ }
+
if (t->rx_buf) {
if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
dma_rx_addr = dma_map_single(hw->dev,
dma_sync_single_for_device(hw->dev, dma_rx_addr,
t->len, DMA_FROM_DEVICE);
}
- if (t->tx_buf) {
- if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
- dma_tx_addr = dma_map_single(hw->dev,
- (void *)t->tx_buf,
- t->len, DMA_TO_DEVICE);
- if (dma_mapping_error(hw->dev, dma_tx_addr))
- dev_err(hw->dev, "tx dma map error\n");
- }
- } else {
+
+ if (!t->tx_buf) {
dma_sync_single_for_device(hw->dev, dma_rx_addr,
t->len, DMA_BIDIRECTIONAL);
hw->tx = hw->rx;
unsigned rfalarm;
unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
unsigned recv_at_once;
+ int last_block = 0;
if (!t->tx_buf && !t->rx_buf && t->len)
return -EINVAL;
while (rb < t->len) {
if (t->len - rb > MPC52xx_PSC_BUFSIZE) {
rfalarm = MPC52xx_PSC_RFALARM;
+ last_block = 0;
} else {
send_at_once = t->len - sb;
rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb);
+ last_block = 1;
}
dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
for (; send_at_once; sb++, send_at_once--) {
/* set EOF flag before the last word is sent */
- if (send_at_once == 1)
+ if (send_at_once == 1 && last_block)
out_8(&psc->ircr2, 0x01);
if (tx_buf)
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/delay.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/regs-ssp.h>
struct device *dev = &pdev->dev;
struct spi_imx_master *platform_info;
struct spi_master *master;
- struct driver_data *drv_data = NULL;
+ struct driver_data *drv_data;
struct resource *res;
int irq, status = 0;
goto err_no_pdata;
}
- drv_data->clk = clk_get(&pdev->dev, "perclk2");
- if (IS_ERR(drv_data->clk)) {
- dev_err(&pdev->dev, "probe - cannot get get\n");
- status = PTR_ERR(drv_data->clk);
- goto err_no_clk;
- }
- clk_enable(drv_data->clk);
-
/* Allocate master with space for drv_data */
master = spi_alloc_master(dev, sizeof(struct driver_data));
if (!master) {
drv_data->dummy_dma_buf = SPI_DUMMY_u32;
+ drv_data->clk = clk_get(&pdev->dev, "perclk2");
+ if (IS_ERR(drv_data->clk)) {
+ dev_err(&pdev->dev, "probe - cannot get clock\n");
+ status = PTR_ERR(drv_data->clk);
+ goto err_no_clk;
+ }
+ clk_enable(drv_data->clk);
+
/* Find and map resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
kfree(drv_data->ioarea);
err_no_iores:
- spi_master_put(master);
-
-err_no_pdata:
clk_disable(drv_data->clk);
clk_put(drv_data->clk);
+
err_no_clk:
+ spi_master_put(master);
+
+err_no_pdata:
err_no_mem:
return status;
}
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
#include <mach/spi.h>
struct s3c24xx_spi {
static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
{
- return spi->controller_data;
+ return spi_master_get_devdata(spi->master);
}
static inline void setsck(struct spi_device *dev, int on)
/* setup spi bitbang adaptor */
sp->bitbang.master = spi_master_get(master);
sp->bitbang.master->bus_num = info->bus_num;
+ sp->bitbang.master->num_chipselect = info->num_chipselect;
sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
}
mutex_unlock(&device_list_lock);
- if (status != 0)
+ if (status == 0)
+ spi_set_drvdata(spi, spidev);
+ else
kfree(spidev);
return status;
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
if (mach->gpio_vbus) {
int value = gpio_get_value(mach->gpio_vbus);
- return mach->gpio_vbus_inverted ? !value : value;
+
+ if (mach->gpio_vbus_inverted)
+ return !value;
+ else
+ return !!value;
}
if (mach->udc_is_connected)
return mach->udc_is_connected();
struct pxa25x_udc *udc;
udc = container_of(_gadget, struct pxa25x_udc, gadget);
- udc->vbus = (is_active != 0);
+ udc->vbus = is_active;
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
pullup(udc);
return 0;
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
struct pxa25x_udc *dev = _dev;
- int vbus = gpio_get_value(dev->mach->gpio_vbus);
- if (dev->mach->gpio_vbus_inverted)
- vbus = !vbus;
-
- pxa25x_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
return IRQ_HANDLED;
}
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/regs-udc.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/regs-udc.h>
+#include <plat/udc.h>
#include "s3c2410_udc.h"
/*
* Implement Orion USB controller specification guidelines
*/
-static void orion_usb_setup(struct usb_hcd *hcd)
+static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
{
+ /* The below GLs are according to the Orion Errata document */
/*
* Clear interrupt cause and mask
*/
ehci_orion_conf_mbus_windows(hcd, pd->dram);
/*
- * setup Orion USB controller
+ * setup Orion USB controller.
*/
- orion_usb_setup(hcd);
+ switch (pd->phy_version) {
+ case EHCI_PHY_NA: /* dont change USB phy settings */
+ break;
+ case EHCI_PHY_ORION:
+ orion_usb_phy_v1_setup(hcd);
+ break;
+ case EHCI_PHY_DD:
+ case EHCI_PHY_KW:
+ default:
+ printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
+ }
err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
if (err)
}
break;
case PCI_VENDOR_ID_ATI:
- /* SB700 old version has a bug in EHCI controller,
+ /* SB600 and old version of SB700 have a bug in EHCI controller,
* which causes usb devices lose response in some cases.
*/
- if (pdev->device == 0x4396) {
+ if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SBX00_SMBUS,
NULL);
if (!p_smbus)
break;
rev = p_smbus->revision;
- if ((rev == 0x3a) || (rev == 0x3b)) {
+ if ((pdev->device == 0x4386) || (rev == 0x3a)
+ || (rev == 0x3b)) {
u8 tmp;
+ ehci_info(ehci, "applying AMD SB600/SB700 USB "
+ "freeze workaround\n");
pci_read_config_byte(pdev, 0x53, &tmp);
pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
}
* the async ring; just the I/O watchdog. Note that if a
* SHRINK were pending, OFF would never be requested.
*/
- enum ehci_timer_action oldactions = ehci->actions;
+ if (timer_pending(&ehci->watchdog)
+ && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+ & ehci->actions))
+ return;
if (!test_and_set_bit (action, &ehci->actions)) {
unsigned long t;
- if (timer_pending(&ehci->watchdog)
- && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
- & oldactions))
- return;
-
switch (action) {
case TIMER_IO_WATCHDOG:
t = EHCI_IO_JIFFIES;
t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
break;
}
- mod_timer(&ehci->watchdog, round_jiffies(t + jiffies));
+ mod_timer(&ehci->watchdog, t + jiffies);
}
}
err("no more memory");
goto reset_open_count;
}
+ kref_init(&tty->kref);
termios = kzalloc(sizeof(*termios), GFP_KERNEL);
if (!termios) {
retval = -ENOMEM;
#define ONDA_VENDOR_ID 0x19d2
#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
+#define ONDA_PRODUCT_MT503HS 0x0200
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
#endif
+/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+ * Obviously the PROM has not been customized by the VAR;
+ * the Vendor and Product string descriptors are:
+ * Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
+ * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
+ */
+UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
+ "Mitac",
+ "GPS",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/*
* This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
* Reported by Pete Zaitcev <zaitcev@redhat.com>
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */
+UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200,
+ "NIKON",
+ "NIKON DSC D2H",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100,
"NIKON",
config FB_ACORN
bool "Acorn VIDC support"
- depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
+ depends on (FB = y) && ARM && ARCH_ACORN
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
{
int ret;
- fb->clk = clk_get(&fb->dev->dev, "CLCDCLK");
+ fb->clk = clk_get(&fb->dev->dev, NULL);
if (IS_ERR(fb->clk)) {
ret = PTR_ERR(fb->clk);
goto out;
}
fb->fb.fix.mmio_start = fb->dev->res.start;
- fb->fb.fix.mmio_len = SZ_4K;
+ fb->fb.fix.mmio_len = 4096;
fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
if (!fb->regs) {
const struct fb_image *image,
u32 fg, u32 bg)
{
- unsigned int src_bytes, dwords;
+ unsigned int dwords;
u32 *bits;
radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE |
+ GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE |
GMC_SRC_DATATYPE_MONO_FG_BG |
ROP3_S |
GMC_BYTE_ORDER_MSB_TO_LSB |
radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg);
radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg);
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
-
/* Ensure the dst cache is flushed and the engine idle before
* issuing the operation.
*
/* X here pads width to a multiple of 32 and uses the clipper to
* adjust the result. Is that really necessary ? Things seem to
- * work ok for me without that and the doco doesn't seem to imply
+ * work ok for me without that and the doco doesn't seem to imply]
* there is such a restriction.
*/
- OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height);
+ radeon_fifo_wait(rinfo, 4);
+ OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx);
+ OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) |
+ (image->dx + image->width));
+ OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
+
+ OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31));
- src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;
- dwords = (src_bytes + 3) / 4;
+ dwords = (image->width + 31) >> 5;
+ dwords *= image->height;
bits = (u32*)(image->data);
while(dwords >= 8) {
info->fbops = &radeonfb_ops;
info->screen_base = rinfo->fb_base;
info->screen_size = rinfo->mapped_vram;
+
/* Fill fix common fields */
strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id));
info->fix.smem_start = rinfo->fb_base_phys;
info->fix.mmio_len = RADEON_REGSIZE;
info->fix.accel = FB_ACCEL_ATI_RADEON;
+ /* Allocate colormap */
fb_alloc_cmap(&info->cmap, 256, 0);
+ /* Setup pixmap used for acceleration */
+#define PIXMAP_SIZE (2048 * 4)
+
+ info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL);
+ if (!info->pixmap.addr) {
+ printk(KERN_ERR "radeonfb: Failed to allocate pixmap !\n");
+ noaccel = 1;
+ goto bail;
+ }
+ info->pixmap.size = PIXMAP_SIZE;
+ info->pixmap.flags = FB_PIXMAP_SYSTEM;
+ info->pixmap.scan_align = 4;
+ info->pixmap.buf_align = 4;
+ info->pixmap.access_align = 32;
+
+bail:
if (noaccel)
info->flags |= FBINFO_HWACCEL_DISABLED;
if (!fbcon_is_inactive(vc, info)) {
if (ops->blank_state != blank) {
- int ret = 1;
-
ops->blank_state = blank;
fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
ops->cursor_flash = (!blank);
- if (info->fbops->fb_blank)
- ret = info->fbops->fb_blank(blank, info);
- if (ret)
- fbcon_generic_blank(vc, info, blank);
+ if (!(info->flags & FBINFO_MISC_USEREVENT))
+ if (fb_blank(info, blank))
+ fbcon_generic_blank(vc, info, blank);
}
if (!blank)
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
omapfb-objs := $(objs-yy)
+++ /dev/null
-/*
- * LCD panel support for the Siemens SX1 mobile phone
- *
- * Current version : Vovan888@gmail.com, great help from FCA00000
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-#include <mach/omapfb.h>
-#include <mach/mcbsp.h>
-#include <mach/mux.h>
-
-/*
- * OMAP310 GPIO registers
- */
-#define GPIO_DATA_INPUT 0xfffce000
-#define GPIO_DATA_OUTPUT 0xfffce004
-#define GPIO_DIR_CONTROL 0xfffce008
-#define GPIO_INT_CONTROL 0xfffce00c
-#define GPIO_INT_MASK 0xfffce010
-#define GPIO_INT_STATUS 0xfffce014
-#define GPIO_PIN_CONTROL 0xfffce018
-
-
-#define A_LCD_SSC_RD 3
-#define A_LCD_SSC_SD 7
-#define _A_LCD_RESET 9
-#define _A_LCD_SSC_CS 12
-#define _A_LCD_SSC_A0 13
-
-#define DSP_REG 0xE1017024
-
-const unsigned char INIT_1[12] = {
- 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
-};
-
-const unsigned char INIT_2[127] = {
- 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
- 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
- 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
- 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
- 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
- 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
- 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
- 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
- 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
- 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
- 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
- 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
- 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
- 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
- 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
- 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
-};
-
-const unsigned char INIT_3[15] = {
- 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
- 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
-};
-
-static void epson_sendbyte(int flag, unsigned char byte)
-{
- int i, shifter = 0x80;
-
- if (!flag)
- gpio_set_value(_A_LCD_SSC_A0, 0);
- mdelay(2);
- gpio_set_value(A_LCD_SSC_RD, 1);
-
- gpio_set_value(A_LCD_SSC_SD, flag);
-
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- for (i = 0; i < 8; i++) {
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- gpio_set_value(A_LCD_SSC_SD, shifter & byte);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- shifter >>= 1;
- }
- gpio_set_value(_A_LCD_SSC_A0, 1);
-}
-
-static void init_system(void)
-{
- omap_mcbsp_request(OMAP_MCBSP3);
- omap_mcbsp_stop(OMAP_MCBSP3);
-}
-
-static void setup_GPIO(void)
-{
- /* new wave */
- gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
- gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
- gpio_request(_A_LCD_RESET, "lcd_reset");
- gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
- gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
-
- /* set GPIOs to output, with initial data */
- gpio_direction_output(A_LCD_SSC_RD, 1);
- gpio_direction_output(A_LCD_SSC_SD, 0);
- gpio_direction_output(_A_LCD_RESET, 0);
- gpio_direction_output(_A_LCD_SSC_CS, 1);
- gpio_direction_output(_A_LCD_SSC_A0, 1);
-}
-
-static void display_init(void)
-{
- int i;
-
- omap_cfg_reg(MCBSP3_CLKX);
-
- mdelay(2);
- setup_GPIO();
- mdelay(2);
-
- /* reset LCD */
- gpio_set_value(A_LCD_SSC_SD, 1);
- epson_sendbyte(0, 0x25);
-
- gpio_set_value(_A_LCD_RESET, 0);
- mdelay(10);
- gpio_set_value(_A_LCD_RESET, 1);
-
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(2);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD, phase 1 */
- epson_sendbyte(0, 0xCA);
- for (i = 0; i < 10; i++)
- epson_sendbyte(1, INIT_1[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2 */
- epson_sendbyte(0, 0xCB);
- for (i = 0; i < 125; i++)
- epson_sendbyte(1, INIT_2[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2a */
- epson_sendbyte(0, 0xCC);
- for (i = 0; i < 14; i++)
- epson_sendbyte(1, INIT_3[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 3 */
- epson_sendbyte(0, 0xBC);
- epson_sendbyte(1, 0x08);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 4 */
- epson_sendbyte(0, 0x07);
- epson_sendbyte(1, 0x05);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 5 */
- epson_sendbyte(0, 0x94);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 6 */
- epson_sendbyte(0, 0xC6);
- epson_sendbyte(1, 0x80);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100); /* used to be 1000 */
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 7 */
- epson_sendbyte(0, 0x16);
- epson_sendbyte(1, 0x02);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xB1);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 8 */
- epson_sendbyte(0, 0x76);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xDB);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 9 */
- epson_sendbyte(0, 0xAF);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
- return 0;
-}
-
-static void sx1_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static void sx1_panel_disable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "SX1: LCD panel disable\n");
- sx1_setmmipower(0);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-
- epson_sendbyte(0, 0x25);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0xAE);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0x95);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_enable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
- init_system();
- display_init();
-
- sx1_setmmipower(1);
- sx1_setbacklight(0x18);
- sx1_setkeylight (0x06);
- return 0;
-}
-
-
-static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel sx1_panel = {
- .name = "sx1",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
- OMAP_LCDC_INV_OUTPUT_EN,
-
- .x_res = 176,
- .y_res = 220,
- .data_lines = 16,
- .bpp = 16,
- .hsw = 5,
- .hfp = 5,
- .hbp = 5,
- .vsw = 2,
- .vfp = 1,
- .vbp = 1,
- .pixel_clock = 1500,
-
- .init = sx1_panel_init,
- .cleanup = sx1_panel_cleanup,
- .enable = sx1_panel_enable,
- .disable = sx1_panel_disable,
- .get_caps = sx1_panel_get_caps,
-};
-
-static int sx1_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&sx1_panel);
- return 0;
-}
-
-static int sx1_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int sx1_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver sx1_panel_driver = {
- .probe = sx1_panel_probe,
- .remove = sx1_panel_remove,
- .suspend = sx1_panel_suspend,
- .resume = sx1_panel_resume,
- .driver = {
- .name = "lcd_sx1",
- .owner = THIS_MODULE,
- },
-};
-
-static int sx1_panel_drv_init(void)
-{
- return platform_driver_register(&sx1_panel_driver);
-}
-
-static void sx1_panel_drv_cleanup(void)
-{
- platform_driver_unregister(&sx1_panel_driver);
-}
-
-module_init(sx1_panel_drv_init);
-module_exit(sx1_panel_drv_cleanup);
#define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP | LCCR3_VSP |\
LCCR3_PCD | LCCR3_BPP)
-static void (*pxafb_backlight_power)(int);
-static void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
-
static int pxafb_activate_var(struct fb_var_screeninfo *var,
struct pxafb_info *);
static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
__func__);
return PTR_ERR(fbi->smart_thread);
}
+
return 0;
}
#else
{
pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff");
- if (pxafb_backlight_power)
- pxafb_backlight_power(on);
+ if (fbi->backlight_power)
+ fbi->backlight_power(on);
}
static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
{
pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff");
- if (pxafb_lcd_power)
- pxafb_lcd_power(on, &fbi->fb.var);
+ if (fbi->lcd_power)
+ fbi->lcd_power(on, &fbi->fb.var);
}
static void pxafb_setup_gpio(struct pxafb_info *fbi)
ret = -EINVAL;
goto failed;
}
- pxafb_backlight_power = inf->pxafb_backlight_power;
- pxafb_lcd_power = inf->pxafb_lcd_power;
+
fbi = pxafb_init_fbinfo(&dev->dev);
if (!fbi) {
/* only reason for pxafb_init_fbinfo to fail is kmalloc */
goto failed;
}
+ fbi->backlight_power = inf->pxafb_backlight_power;
+ fbi->lcd_power = inf->pxafb_lcd_power;
+
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&dev->dev, "no I/O memory resource defined\n");
struct notifier_block freq_transition;
struct notifier_block freq_policy;
#endif
+
+ void (*lcd_power)(int, struct fb_var_screeninfo *);
+ void (*backlight_power)(int);
};
#define TO_INF(ptr,member) container_of(ptr,struct pxafb_info,member)
* - convert dma address types to dma_addr_t
* - remove unused 'montype' stuff
* - remove redundant zero inits of init_var after the initial
- * memzero.
+ * memset.
* - remove allow_modeset (acornfb idea does not belong here)
*
* 2001/05/28: <rmk@arm.linux.org.uk>
{ "" }
};
-static struct xenbus_driver xenfb = {
+static struct xenbus_driver xenfb_driver = {
.name = "vfb",
.owner = THIS_MODULE,
.ids = xenfb_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenfb);
+ return xenbus_register_frontend(&xenfb_driver);
}
static void __exit xenfb_cleanup(void)
{
- xenbus_unregister_driver(&xenfb);
+ xenbus_unregister_driver(&xenfb_driver);
}
module_init(xenfb_init);
/* Put a banner in the log (for DEBUG) */
dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
- dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
- (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+ dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+ (unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
+ fbsize);
return 0; /* success */
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1 && ARM
+ depends on W1 && ARM && HAVE_CLK
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
#undef S3C_VA_WATCHDOG
#define S3C_VA_WATCHDOG (0)
-#include <asm/plat-s3c/regs-watchdog.h>
+#include <plat/regs-watchdog.h>
#define PFX "s3c2410-wdt: "
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/uaccess.h>
+#include <linux/timex.h>
#ifdef CONFIG_ARCH_PXA
#include <mach/pxa-regs.h>
spin_unlock(&buffer_mapping->private_lock);
}
}
+EXPORT_SYMBOL(invalidate_inode_buffers);
/*
* Remove any clean buffers from the inode's buffer list. This is called
cFYI(1, ("write_end for page %p from pos %lld with %d bytes",
page, pos, copied));
- if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
+ if (PageChecked(page)) {
+ if (copied == len)
+ SetPageUptodate(page);
+ ClearPageChecked(page);
+ } else if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
SetPageUptodate(page);
if (!PageUptodate(page)) {
{
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
loff_t offset = pos & (PAGE_CACHE_SIZE - 1);
+ loff_t page_start = pos & PAGE_MASK;
+ loff_t i_size;
+ struct page *page;
+ int rc = 0;
cFYI(1, ("write_begin from %lld len %d", (long long)pos, len));
- *pagep = __grab_cache_page(mapping, index);
- if (!*pagep)
- return -ENOMEM;
-
- if (PageUptodate(*pagep))
- return 0;
+ page = __grab_cache_page(mapping, index);
+ if (!page) {
+ rc = -ENOMEM;
+ goto out;
+ }
- /* If we are writing a full page it will be up to date,
- no need to read from the server */
- if (len == PAGE_CACHE_SIZE && flags & AOP_FLAG_UNINTERRUPTIBLE)
- return 0;
+ if (PageUptodate(page))
+ goto out;
- if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
- int rc;
+ /*
+ * If we write a full page it will be up to date, no need to read from
+ * the server. If the write is short, we'll end up doing a sync write
+ * instead.
+ */
+ if (len == PAGE_CACHE_SIZE)
+ goto out;
- /* might as well read a page, it is fast enough */
- rc = cifs_readpage_worker(file, *pagep, &offset);
+ /*
+ * optimize away the read when we have an oplock, and we're not
+ * expecting to use any of the data we'd be reading in. That
+ * is, when the page lies beyond the EOF, or straddles the EOF
+ * and the write will cover all of the existing data.
+ */
+ if (CIFS_I(mapping->host)->clientCanCacheRead) {
+ i_size = i_size_read(mapping->host);
+ if (page_start >= i_size ||
+ (offset == 0 && (pos + len) >= i_size)) {
+ zero_user_segments(page, 0, offset,
+ offset + len,
+ PAGE_CACHE_SIZE);
+ /*
+ * PageChecked means that the parts of the page
+ * to which we're not writing are considered up
+ * to date. Once the data is copied to the
+ * page, it can be set uptodate.
+ */
+ SetPageChecked(page);
+ goto out;
+ }
+ }
- /* we do not need to pass errors back
- e.g. if we do not have read access to the file
- because cifs_write_end will attempt synchronous writes
- -- shaggy */
+ if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
+ /*
+ * might as well read a page, it is fast enough. If we get
+ * an error, we don't need to return it. cifs_write_end will
+ * do a sync write instead since PG_uptodate isn't set.
+ */
+ cifs_readpage_worker(file, page, &page_start);
} else {
/* we could try using another file handle if there is one -
but how would we lock it to prevent close of that handle
racing with this read? In any case
this will be written out by write_end so is fine */
}
-
- return 0;
+out:
+ *pagep = page;
+ return rc;
}
const struct address_space_operations cifs_addr_ops = {
#define EP_UNACTIVE_PTR ((void *) -1L)
+#define EP_ITEM_COST (sizeof(struct epitem) + sizeof(struct eppoll_entry))
+
struct epoll_filefd {
struct file *file;
int fd;
* holding ->lock.
*/
struct epitem *ovflist;
+
+ /* The user that created the eventpoll descriptor */
+ struct user_struct *user;
};
/* Wait structure used by the poll hooks */
struct epitem *epi;
};
+/*
+ * Configuration options available inside /proc/sys/fs/epoll/
+ */
+/* Maximum number of epoll devices, per user */
+static int max_user_instances __read_mostly;
+/* Maximum number of epoll watched descriptors, per user */
+static int max_user_watches __read_mostly;
+
/*
* This mutex is used to serialize ep_free() and eventpoll_release_file().
*/
-static struct mutex epmutex;
+static DEFINE_MUTEX(epmutex);
/* Safe wake up implementation */
static struct poll_safewake psw;
/* Slab cache used to allocate "struct eppoll_entry" */
static struct kmem_cache *pwq_cache __read_mostly;
+#ifdef CONFIG_SYSCTL
+
+#include <linux/sysctl.h>
+
+static int zero;
+
+ctl_table epoll_table[] = {
+ {
+ .procname = "max_user_instances",
+ .data = &max_user_instances,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &zero,
+ },
+ {
+ .procname = "max_user_watches",
+ .data = &max_user_watches,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &zero,
+ },
+ { .ctl_name = 0 }
+};
+#endif /* CONFIG_SYSCTL */
+
/* Setup the structure that is used as key for the RB tree */
static inline void ep_set_ffd(struct epoll_filefd *ffd,
/* At this point it is safe to free the eventpoll item */
kmem_cache_free(epi_cache, epi);
+ atomic_dec(&ep->user->epoll_watches);
+
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_remove(%p, %p)\n",
current, ep, file));
mutex_unlock(&epmutex);
mutex_destroy(&ep->mtx);
+ atomic_dec(&ep->user->epoll_devs);
+ free_uid(ep->user);
kfree(ep);
}
static int ep_alloc(struct eventpoll **pep)
{
- struct eventpoll *ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ int error;
+ struct user_struct *user;
+ struct eventpoll *ep;
- if (!ep)
- return -ENOMEM;
+ user = get_current_user();
+ error = -EMFILE;
+ if (unlikely(atomic_read(&user->epoll_devs) >=
+ max_user_instances))
+ goto free_uid;
+ error = -ENOMEM;
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (unlikely(!ep))
+ goto free_uid;
spin_lock_init(&ep->lock);
mutex_init(&ep->mtx);
INIT_LIST_HEAD(&ep->rdllist);
ep->rbr = RB_ROOT;
ep->ovflist = EP_UNACTIVE_PTR;
+ ep->user = user;
*pep = ep;
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_alloc() ep=%p\n",
current, ep));
return 0;
+
+free_uid:
+ free_uid(user);
+ return error;
}
/*
struct epitem *epi;
struct ep_pqueue epq;
- error = -ENOMEM;
+ if (unlikely(atomic_read(&ep->user->epoll_watches) >=
+ max_user_watches))
+ return -ENOSPC;
if (!(epi = kmem_cache_alloc(epi_cache, GFP_KERNEL)))
- goto error_return;
+ return -ENOMEM;
/* Item initialization follow here ... */
INIT_LIST_HEAD(&epi->rdllink);
* install process. Namely an allocation for a wait queue failed due
* high memory pressure.
*/
+ error = -ENOMEM;
if (epi->nwait < 0)
goto error_unregister;
spin_unlock_irqrestore(&ep->lock, flags);
+ atomic_inc(&ep->user->epoll_watches);
+
/* We have to call this outside the lock */
if (pwake)
ep_poll_safewake(&psw, &ep->poll_wait);
spin_unlock_irqrestore(&ep->lock, flags);
kmem_cache_free(epi_cache, epi);
-error_return:
+
return error;
}
flags & O_CLOEXEC);
if (fd < 0)
ep_free(ep);
+ atomic_inc(&ep->user->epoll_devs);
error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
static int __init eventpoll_init(void)
{
- mutex_init(&epmutex);
+ struct sysinfo si;
+
+ si_meminfo(&si);
+ max_user_instances = 128;
+ max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) /
+ EP_ITEM_COST;
/* Initialize the structure used to perform safe poll wait head wake ups */
ep_poll_safewake_init(&psw);
extern int debug_msgs;
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+extern void __ntfs_debug(const char *file, int line, const char *function,
+ const char *format, ...) __attribute__ ((format (printf, 4, 5)));
/**
* ntfs_debug - write a debug level message to syslog
* @f: a printf format string containing the message
* ntfs_debug() writes a DEBUG level message to the syslog but only if the
* driver was compiled with -DDEBUG. Otherwise, the call turns into a NOP.
*/
-static void ntfs_debug(const char *f, ...);
-#endif
-
-extern void __ntfs_debug (const char *file, int line, const char *function,
- const char *format, ...) __attribute__ ((format (printf, 4, 5)));
#define ntfs_debug(f, a...) \
__ntfs_debug(__FILE__, __LINE__, __func__, f, ##a)
bh = bhs[i];
if (buffer_jbd(bh)) {
- mlog(ML_ERROR,
+ mlog(ML_BH_IO,
"trying to sync read a jbd "
"managed bh (blocknr = %llu), skipping\n",
(unsigned long long)bh->b_blocknr);
for (i = nr; i > 0; i--) {
bh = bhs[i - 1];
- if (buffer_jbd(bh)) {
- mlog(ML_ERROR,
- "the journal got the buffer while it was "
- "locked for io! (blocknr = %llu)\n",
- (unsigned long long)bh->b_blocknr);
- BUG();
- }
+ /* No need to wait on the buffer if it's managed by JBD. */
+ if (!buffer_jbd(bh))
+ wait_on_buffer(bh);
- wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
/* Status won't be cleared from here on out,
* so we can safely record this and loop back
ignore_cache = 1;
}
- /* XXX: Can we ever get this and *not* have the cached
- * flag set? */
if (buffer_jbd(bh)) {
if (ignore_cache)
mlog(ML_BH_IO, "trying to sync read a jbd "
0, (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
SLAB_MEM_SPREAD),
dlmfs_init_once);
- if (!dlmfs_inode_cache)
+ if (!dlmfs_inode_cache) {
+ status = -ENOMEM;
goto bail;
+ }
cleanup_inode = 1;
user_dlm_worker = create_singlethread_workqueue("user_dlm");
#include <linux/workqueue.h>
/* user_lock_res->l_flags flags. */
-#define USER_LOCK_ATTACHED (0x00000001) /* have we initialized
+#define USER_LOCK_ATTACHED (0x00000001) /* we have initialized
* the lvb */
#define USER_LOCK_BUSY (0x00000002) /* we are currently in
* dlm_lock */
lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
lockres->l_unlock_action = OCFS2_UNLOCK_INVALID;
- spin_unlock_irqrestore(&lockres->l_lock, flags);
-
wake_up(&lockres->l_event);
+ spin_unlock_irqrestore(&lockres->l_lock, flags);
mlog_exit_void();
}
};
/* ocfs2_lock_res->l_flags flags. */
-#define OCFS2_LOCK_ATTACHED (0x00000001) /* have we initialized
+#define OCFS2_LOCK_ATTACHED (0x00000001) /* we have initialized
* the lvb */
#define OCFS2_LOCK_BUSY (0x00000002) /* we are currently in
* dlm_lock */
static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb)
{
+ if (!lksb->lksb_fsdlm.sb_lvbptr)
+ lksb->lksb_fsdlm.sb_lvbptr = (char *)lksb +
+ sizeof(struct dlm_lksb);
return (void *)(lksb->lksb_fsdlm.sb_lvbptr);
}
udf_truncate_tail_extent(inode);
unlock_kernel();
write_inode_now(inode, 0);
+ invalidate_inode_buffers(inode);
}
iinfo = UDF_I(inode);
kfree(iinfo->i_ext.i_data);
{.info = {"_BFS", 1, 0}},
{.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
9,
- ACPI_RTYPE_STRING, 4, 0}}, /* fixed (9 Int),(4 Str) */
+ ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */
{.info = {"_BLT", 3, 0}},
{.info = {"_BMC", 1, 0}},
{.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}},
+ {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
{.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */
{.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */
};
extern void drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
+extern void drm_vblank_cleanup(struct drm_device *dev);
/* Modesetting support */
extern int drm_modeset_ctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
-#ifdef __ARCH_WANT_COMPAT_SYS_PTRACE
extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
compat_long_t addr, compat_long_t data);
-#endif /* __ARCH_WANT_COMPAT_SYS_PTRACE */
/*
* epoll (fs/eventpoll.c) compat bits follow ...
#endif /* CONFIG_HIGHMEM */
/* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+#ifndef clear_user_highpage
static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
{
void *addr = kmap_atomic(page, KM_USER0);
clear_user_page(addr, vaddr, page);
kunmap_atomic(addr, KM_USER0);
}
+#endif
#ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
/**
unsigned long bitmap; /* A zero bit means "space here" */
struct idr_layer *ary[1<<IDR_BITS];
int count; /* When zero, we can release it */
+ int layer; /* distance from leaf */
struct rcu_head rcu_head;
};
struct idr {
struct idr_layer *top;
struct idr_layer *id_free;
- int layers;
+ int layers; /* only valid without concurrent changes */
int id_free_cnt;
spinlock_t lock;
};
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
-#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_AFFINITY_SET 0x02000000 /* IRQ affinity was set from userspace*/
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
/**
* struct irq_desc - interrupt descriptor
- *
+ * @irq: interrupt number for this descriptor
* @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
* @chip: low level interrupt hardware access
* @msi_desc: MSI descriptor
* @cpu: cpu index useful for balancing
* @pending_mask: pending rebalanced interrupts
* @dir: /proc/irq/ procfs entry
- * @affinity_entry: /proc/irq/smp_affinity procfs entry on SMP
* @name: flow handler name for /proc/interrupts output
*/
struct irq_desc {
#ifdef CONFIG_GENERIC_PENDING_IRQ
-void set_pending_irq(unsigned int irq, cpumask_t mask);
void move_native_irq(int irq);
void move_masked_irq(int irq);
{
}
-static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
-}
-
#endif /* CONFIG_GENERIC_PENDING_IRQ */
#else /* CONFIG_SMP */
ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
not multiple of 16 bytes */
+ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
#ifdef CONFIG_MEMORY_HOTPLUG
#define hotplug_memory_notifier(fn, pri) { \
- static struct notifier_block fn##_mem_nb = \
+ static __meminitdata struct notifier_block fn##_mem_nb =\
{ .notifier_call = fn, .priority = pri }; \
register_memory_notifier(&fn##_mem_nb); \
}
int num_ports;
int vl_cap[MLX4_MAX_PORTS + 1];
int ib_mtu_cap[MLX4_MAX_PORTS + 1];
+ __be32 ib_port_def_cap[MLX4_MAX_PORTS + 1];
u64 def_mac[MLX4_MAX_PORTS + 1];
int eth_mtu_cap[MLX4_MAX_PORTS + 1];
int gid_table_len[MLX4_MAX_PORTS + 1];
struct list_head lru; /* per cgroup LRU list */
};
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat);
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
void __init page_cgroup_init(void);
struct page_cgroup *lookup_page_cgroup(struct page *page);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct page_cgroup;
-static inline void pgdat_page_cgroup_init(struct pglist_data *pgdat)
+static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
}
atomic_t inotify_watches; /* How many inotify watches does this user have? */
atomic_t inotify_devs; /* How many inotify devs does this user have opened? */
#endif
+#ifdef CONFIG_EPOLL
+ atomic_t epoll_devs; /* The number of epoll descriptors currently open */
+ atomic_t epoll_watches; /* The number of file descriptors currently watched */
+#endif
#ifdef CONFIG_POSIX_MQUEUE
/* protected by mq_lock */
unsigned long mq_bytes; /* How many bytes can be allocated to mqueue? */
* It must be called by the arch code on the new cpu, before the new cpu
* enables interrupts and before the "boot" cpu returns from __cpu_up().
*/
-void notify_cpu_starting(unsigned int cpu)
+void __cpuinit notify_cpu_starting(unsigned int cpu)
{
unsigned long val = CPU_STARTING;
int i, j, k; /* indices for partition finding loops */
cpumask_t *doms; /* resulting partition; i.e. sched domains */
struct sched_domain_attr *dattr; /* attributes for custom domains */
- int ndoms; /* number of sched domains in result */
+ int ndoms = 0; /* number of sched domains in result */
int nslot; /* next empty doms[] cpumask_t slot */
doms = NULL;
struct irqaction *action) { }
#endif
+extern int irq_select_affinity_usr(unsigned int irq);
+
/*
* Debugging printout:
*/
int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
{
struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
if (!desc->chip->set_affinity)
return -EINVAL;
+ spin_lock_irqsave(&desc->lock, flags);
+
#ifdef CONFIG_GENERIC_PENDING_IRQ
if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
- spin_unlock_irqrestore(&desc->lock, flags);
- } else
- set_pending_irq(irq, cpumask);
+ } else {
+ desc->status |= IRQ_MOVE_PENDING;
+ desc->pending_mask = cpumask;
+ }
#else
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
#endif
+ desc->status |= IRQ_AFFINITY_SET;
+ spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
/*
* Generic version of the affinity autoselector.
*/
-int irq_select_affinity(unsigned int irq)
+int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc)
{
cpumask_t mask;
- struct irq_desc *desc;
if (!irq_can_set_affinity(irq))
return 0;
cpus_and(mask, cpu_online_map, irq_default_affinity);
- desc = irq_to_desc(irq);
+ /*
+ * Preserve an userspace affinity setup, but make sure that
+ * one of the targets is online.
+ */
+ if (desc->status & (IRQ_AFFINITY_SET | IRQ_NO_BALANCING)) {
+ if (cpus_intersects(desc->affinity, cpu_online_map))
+ mask = desc->affinity;
+ else
+ desc->status &= ~IRQ_AFFINITY_SET;
+ }
+
desc->affinity = mask;
desc->chip->set_affinity(irq, mask);
return 0;
}
+#else
+static inline int do_irq_select_affinity(unsigned int irq, struct irq_desc *d)
+{
+ return irq_select_affinity(irq);
+}
#endif
+/*
+ * Called when affinity is set via /proc/irq
+ */
+int irq_select_affinity_usr(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ ret = do_irq_select_affinity(irq, desc);
+ spin_unlock_irqrestore(&desc->lock, flags);
+
+ return ret;
+}
+
+#else
+static inline int do_irq_select_affinity(int irq, struct irq_desc *desc)
+{
+ return 0;
+}
#endif
/**
* IRQF_TRIGGER_* but the PIC does not support multiple
* flow-types?
*/
- pr_warning("No set_type function for IRQ %d (%s)\n", irq,
+ pr_debug("No set_type function for IRQ %d (%s)\n", irq,
chip ? (chip->name ? : "unknown") : "unknown");
return 0;
}
/* Undo nested disables: */
desc->depth = 1;
+ /* Exclude IRQ from balancing if requested */
+ if (new->flags & IRQF_NOBALANCING)
+ desc->status |= IRQ_NO_BALANCING;
+
/* Set default affinity mask once everything is setup */
- irq_select_affinity(irq);
+ do_irq_select_affinity(irq, desc);
} else if ((new->flags & IRQF_TRIGGER_MASK)
&& (new->flags & IRQF_TRIGGER_MASK)
*p = new;
- /* Exclude IRQ from balancing */
- if (new->flags & IRQF_NOBALANCING)
- desc->status |= IRQ_NO_BALANCING;
-
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
#include <linux/irq.h>
-void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- desc->status |= IRQ_MOVE_PENDING;
- desc->pending_mask = mask;
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
void move_masked_irq(int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
if (!cpus_intersects(new_value, cpu_online_map))
/* Special case for empty set - allow the architecture
code to set default SMP affinity. */
- return irq_select_affinity(irq) ? -EINVAL : count;
+ return irq_select_affinity_usr(irq) ? -EINVAL : count;
irq_set_affinity(irq, new_value);
{
printk("Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n");
- printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
+ printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
printk("... MAX_LOCK_DEPTH: %lu\n", MAX_LOCK_DEPTH);
printk("... MAX_LOCKDEP_KEYS: %lu\n", MAX_LOCKDEP_KEYS);
- printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
+ printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
printk("... MAX_LOCKDEP_ENTRIES: %lu\n", MAX_LOCKDEP_ENTRIES);
printk("... MAX_LOCKDEP_CHAINS: %lu\n", MAX_LOCKDEP_CHAINS);
printk("... CHAINHASH_SIZE: %lu\n", CHAINHASH_SIZE);
* 'M' - System experienced a machine check exception.
* 'B' - System has hit bad_page.
* 'U' - Userspace-defined naughtiness.
+ * 'D' - Kernel has oopsed before
* 'A' - ACPI table overridden.
* 'W' - Taint on warning.
* 'C' - modules from drivers/staging are loaded.
put_cpu();
}
-static int __devinit profile_cpu_callback(struct notifier_block *info,
+static int __cpuinit profile_cpu_callback(struct notifier_block *info,
unsigned long action, void *__cpu)
{
int node, cpu = (unsigned long)__cpu;
#define create_hash_tables() ({ 0; })
#endif
-int create_proc_profile(void)
+int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */
{
struct proc_dir_entry *entry;
return (copied == sizeof(data)) ? 0 : -EIO;
}
-#if defined CONFIG_COMPAT && defined __ARCH_WANT_COMPAT_SYS_PTRACE
+#if defined CONFIG_COMPAT
#include <linux/compat.h>
int compat_ptrace_request(struct task_struct *child, compat_long_t request,
unlock_kernel();
return ret;
}
-#endif /* CONFIG_COMPAT && __ARCH_WANT_COMPAT_SYS_PTRACE */
+#endif /* CONFIG_COMPAT */
static unsigned long cpu_avg_load_per_task(int cpu)
{
struct rq *rq = cpu_rq(cpu);
+ unsigned long nr_running = ACCESS_ONCE(rq->nr_running);
- if (rq->nr_running)
- rq->avg_load_per_task = rq->load.weight / rq->nr_running;
+ if (nr_running)
+ rq->avg_load_per_task = rq->load.weight / nr_running;
else
rq->avg_load_per_task = 0;
#ifdef CONFIG_INOTIFY_USER
extern struct ctl_table inotify_table[];
#endif
+#ifdef CONFIG_EPOLL
+extern struct ctl_table epoll_table[];
+#endif
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
int sysctl_legacy_va_layout;
.child = inotify_table,
},
#endif
+#ifdef CONFIG_EPOLL
+ {
+ .procname = "epoll",
+ .mode = 0555,
+ .child = epoll_table,
+ },
+#endif
#endif
{
.ctl_name = KERN_SETUID_DUMPABLE,
out:
if (resched)
- preempt_enable_notrace();
+ preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
return NULL;
static struct trace_array *mmio_trace_array;
static bool overrun_detected;
+static unsigned long prev_overruns;
static void mmio_reset_data(struct trace_array *tr)
{
int cpu;
overrun_detected = false;
+ prev_overruns = 0;
tr->time_start = ftrace_now(tr->cpu);
for_each_online_cpu(cpu)
static unsigned long count_overruns(struct trace_iterator *iter)
{
- int cpu;
unsigned long cnt = 0;
-/* FIXME: */
-#if 0
- for_each_online_cpu(cpu) {
- cnt += iter->overrun[cpu];
- iter->overrun[cpu] = 0;
- }
-#endif
- (void)cpu;
+ unsigned long over = ring_buffer_overruns(iter->tr->buffer);
+
+ if (over > prev_overruns)
+ cnt = over - prev_overruns;
+ prev_overruns = over;
return cnt;
}
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
- long i = (long)m->private;
+ long i;
(*pos)++;
- i++;
+ if (v == SEQ_START_TOKEN)
+ i = 0;
+ else {
+ i = *(long *)v;
+ i++;
+ }
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
static void *t_start(struct seq_file *m, loff_t *pos)
{
- void *t = &m->private;
+ void *t = SEQ_START_TOKEN;
loff_t l = 0;
local_irq_disable();
__raw_spin_lock(&max_stack_lock);
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
for (; t && l < *pos; t = t_next(m, t, &l))
;
static int t_show(struct seq_file *m, void *v)
{
- long i = *(long *)v;
+ long i;
int size;
- if (i < 0) {
+ if (v == SEQ_START_TOKEN) {
seq_printf(m, " Depth Size Location"
" (%d entries)\n"
" ----- ---- --------\n",
return 0;
}
+ i = *(long *)v;
+
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
return 0;
int ret;
ret = seq_open(file, &stack_trace_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = (void *)-1;
- }
return ret;
}
new = get_from_free_list(idp);
if (!new)
return -1;
+ new->layer = l-1;
rcu_assign_pointer(p->ary[m], new);
p->count++;
}
if (unlikely(!p)) {
if (!(p = get_from_free_list(idp)))
return -1;
+ p->layer = 0;
layers = 1;
}
/*
}
new->ary[0] = p;
new->count = 1;
+ new->layer = layers-1;
if (p->bitmap == IDR_FULL)
__set_bit(0, &new->bitmap);
p = new;
int n;
struct idr_layer *p;
- n = idp->layers * IDR_BITS;
p = rcu_dereference(idp->top);
+ if (!p)
+ return NULL;
+ n = (p->layer+1) * IDR_BITS;
/* Mask off upper bits we don't use for the search. */
id &= MAX_ID_MASK;
if (id >= (1 << n))
return NULL;
+ BUG_ON(n == 0);
while (n > 0 && p) {
n -= IDR_BITS;
+ BUG_ON(n != p->layer*IDR_BITS);
p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
}
return((void *)p);
int n;
struct idr_layer *p, *old_p;
- n = idp->layers * IDR_BITS;
p = idp->top;
+ if (!p)
+ return ERR_PTR(-EINVAL);
+
+ n = (p->layer+1) * IDR_BITS;
id &= MAX_ID_MASK;
pgdat->node_start_pfn;
}
-static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_zone(struct zone *zone, unsigned long phys_start_pfn)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int nr_pages = PAGES_PER_SECTION;
return 0;
}
-static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_section(struct zone *zone, unsigned long phys_start_pfn)
{
int nr_pages = PAGES_PER_SECTION;
int ret;
* call this function after deciding the zone to which to
* add the new pages.
*/
-int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
+int __ref __add_pages(struct zone *zone, unsigned long phys_start_pfn,
unsigned long nr_pages)
{
unsigned long i;
}
-int add_memory(int nid, u64 start, u64 size)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+int __ref add_memory(int nid, u64 start, u64 size)
{
pg_data_t *pgdat = NULL;
int new_pgdat = 0;
#if !defined(CONFIG_SPARSEMEM)
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
pgdat->node_page_cgroup = NULL;
}
return section->page_cgroup + pfn;
}
-int __meminit init_section_page_cgroup(unsigned long pfn)
+/* __alloc_bootmem...() is protected by !slab_available() */
+int __init_refok init_section_page_cgroup(unsigned long pfn)
{
struct mem_section *section;
struct page_cgroup *base, *pc;
section = __pfn_to_section(pfn);
- if (section->page_cgroup)
- return 0;
-
- nid = page_to_nid(pfn_to_page(pfn));
-
- table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
- if (slab_is_available()) {
- base = kmalloc_node(table_size, GFP_KERNEL, nid);
- if (!base)
- base = vmalloc_node(table_size, nid);
- } else {
- base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size,
+ if (!section->page_cgroup) {
+ nid = page_to_nid(pfn_to_page(pfn));
+ table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
+ if (slab_is_available()) {
+ base = kmalloc_node(table_size, GFP_KERNEL, nid);
+ if (!base)
+ base = vmalloc_node(table_size, nid);
+ } else {
+ base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
+ table_size,
PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+ }
+ } else {
+ /*
+ * We don't have to allocate page_cgroup again, but
+ * address of memmap may be changed. So, we have to initialize
+ * again.
+ */
+ base = section->page_cgroup + pfn;
+ table_size = 0;
+ /* check address of memmap is changed or not. */
+ if (base->page == pfn_to_page(pfn))
+ return 0;
}
if (!base) {
}
}
-int online_page_cgroup(unsigned long start_pfn,
+int __meminit online_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages,
int nid)
{
return -ENOMEM;
}
-int offline_page_cgroup(unsigned long start_pfn,
+int __meminit offline_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages, int nid)
{
unsigned long start, end, pfn;
}
-static int page_cgroup_callback(struct notifier_block *self,
+static int __meminit page_cgroup_callback(struct notifier_block *self,
unsigned long action, void *arg)
{
struct memory_notify *mn = arg;
ret = online_page_cgroup(mn->start_pfn,
mn->nr_pages, mn->status_change_nid);
break;
- case MEM_CANCEL_ONLINE:
case MEM_OFFLINE:
offline_page_cgroup(mn->start_pfn,
mn->nr_pages, mn->status_change_nid);
break;
+ case MEM_CANCEL_ONLINE:
case MEM_GOING_OFFLINE:
break;
case MEM_ONLINE:
case MEM_CANCEL_OFFLINE:
break;
}
- ret = notifier_from_errno(ret);
+
+ if (ret)
+ ret = notifier_from_errno(ret);
+ else
+ ret = NOTIFY_OK;
+
return ret;
}
" want\n");
}
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
return;
}
case MEM_CANCEL_OFFLINE:
break;
}
-
- ret = notifier_from_errno(ret);
+ if (ret)
+ ret = notifier_from_errno(ret);
+ else
+ ret = NOTIFY_OK;
return ret;
}
* set. If this is <=0, then that means that the passed-in
* map was not consumed and must be freed.
*/
-int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
int nr_pages)
{
unsigned long section_nr = pfn_to_section_nr(start_pfn);
BUG_ON(addr >= end);
pgd = pgd_offset_k(addr);
- flush_cache_vunmap(addr, end);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
}
/*
- * Free and unmap a vmap area
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
*/
-static void free_unmap_vmap_area(struct vmap_area *va)
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
{
va->flags |= VM_LAZY_FREE;
atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
try_purge_vmap_area_lazy();
}
+/*
+ * Free and unmap a vmap area
+ */
+static void free_unmap_vmap_area(struct vmap_area *va)
+{
+ flush_cache_vunmap(va->va_start, va->va_end);
+ free_unmap_vmap_area_noflush(va);
+}
+
static struct vmap_area *find_vmap_area(unsigned long addr)
{
struct vmap_area *va;
spin_unlock(&vmap_block_tree_lock);
BUG_ON(tmp != vb);
- free_unmap_vmap_area(vb->va);
+ free_unmap_vmap_area_noflush(vb->va);
call_rcu(&vb->rcu_head, rcu_free_vb);
}
BUG_ON(size & ~PAGE_MASK);
BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC);
+
+ flush_cache_vunmap((unsigned long)addr, (unsigned long)addr + size);
+
order = get_order(size);
offset = (unsigned long)addr & (VMAP_BLOCK_SIZE - 1);
list_add(&page->lru, &l_inactive);
}
+ spin_lock_irq(&zone->lru_lock);
/*
* Count referenced pages from currently used mappings as
* rotated, even though they are moved to the inactive list.
pgmoved = 0;
lru = LRU_BASE + file * LRU_FILE;
- spin_lock_irq(&zone->lru_lock);
while (!list_empty(&l_inactive)) {
page = lru_to_page(&l_inactive);
prefetchw_prev_lru_page(page, &l_inactive, flags);
# print STDERR "parameter def '$1' = '$contents'\n";
$name = $1;
$parameterdescs{$name} = $contents;
+ } elsif ($name eq "@\.\.\.") {
+# print STDERR "parameter def '...' = '$contents'\n";
+ $name = "...";
+ $parameterdescs{$name} = $contents;
} else {
# print STDERR "other section '$name' = '$contents'\n";
if (defined($sections{$name}) && ($sections{$name} ne "")) {
if ($type eq "" && $param =~ /\.\.\.$/)
{
- $type="";
- $parameterdescs{$param} = "variable arguments";
+ if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
+ $parameterdescs{$param} = "variable arguments";
+ }
}
elsif ($type eq "" && ($param eq "" or $param eq "void"))
{
- $type="";
$param="void";
$parameterdescs{void} = "no arguments";
}
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/audio.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
#include <mach/audio.h>
#include "pxa2xx-pcm.h"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <asm/dma.h>
+#include <mach/dma.h>
struct pxa2xx_runtime_data {
int dma_ch;
#define VNC_HANDSET_DETECT 0x40
#define VNC_DISABLE_AUTOSWITCH 0x80
-extern spinlock_t gpio_lock;
-
static inline void
vnc_mute_spkr(wavnc_info *devc)
{
unsigned long flags;
- spin_lock_irqsave(&gpio_lock, flags);
- cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
static void
{
hda_nid_t *d;
- snd_hda_codec_write(codec, nid, 0, verb, val);
+ snd_hda_codec_write_cache(codec, nid, 0, verb, val);
d = codec->slave_dig_outs;
if (!d)
return;
for (; *d; d++)
- snd_hda_codec_write(codec, *d, 0, verb, val);
+ snd_hda_codec_write_cache(codec, *d, 0, verb, val);
}
static inline void set_dig_out_convert(struct hda_codec *codec, hda_nid_t nid,
enum {
STAC_92HD73XX_REF,
- STAC_DELL_M6,
+ STAC_DELL_M6_AMIC,
+ STAC_DELL_M6_DMIC,
+ STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
STAC_92HD73XX_MODELS
};
STAC_92HD71BXX_REF,
STAC_DELL_M4_1,
STAC_DELL_M4_2,
+ STAC_DELL_M4_3,
STAC_HP_M4,
STAC_92HD71BXX_MODELS
};
unsigned int num_mixers;
int board_config;
+ unsigned int eapd_switch: 1;
unsigned int surr_switch: 1;
unsigned int line_switch: 1;
unsigned int mic_switch: 1;
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
- [STAC_DELL_M6] = dell_m6_pin_configs,
+ [STAC_DELL_M6_AMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
[STAC_DELL_EQ] = dell_m6_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = "ref",
- [STAC_DELL_M6] = "dell-m6",
+ [STAC_DELL_M6_AMIC] = "dell-m6-amic",
+ [STAC_DELL_M6_DMIC] = "dell-m6-dmic",
+ [STAC_DELL_M6_BOTH] = "dell-m6",
[STAC_DELL_EQ] = "dell-eq",
};
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD73XX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
- "unknown Dell", STAC_DELL_M6),
+ "Dell Studio 1535", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0257,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025e,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025f,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0272,
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
+ "Dell Studio 1537", STAC_DELL_M6_DMIC),
{} /* terminator */
};
0x40f000f0, 0x044413b0, 0x044413b0,
};
+static unsigned int dell_m4_3_pin_configs[11] = {
+ 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
+ 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
+ 0x40f000f0, 0x044413b0, 0x044413b0,
+};
+
static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
[STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs,
[STAC_DELL_M4_1] = dell_m4_1_pin_configs,
[STAC_DELL_M4_2] = dell_m4_2_pin_configs,
+ [STAC_DELL_M4_3] = dell_m4_3_pin_configs,
[STAC_HP_M4] = NULL,
};
[STAC_92HD71BXX_REF] = "ref",
[STAC_DELL_M4_1] = "dell-m4-1",
[STAC_DELL_M4_2] = "dell-m4-2",
+ [STAC_DELL_M4_3] = "dell-m4-3",
[STAC_HP_M4] = "hp-m4",
};
"unknown Dell", STAC_DELL_M4_2),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264,
"unknown Dell", STAC_DELL_M4_2),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa,
+ "unknown Dell", STAC_DELL_M4_3),
{} /* terminator */
};
cfg->hp_outs && !spec->multiout.hp_nid)
spec->multiout.hp_nid = nid;
- if (cfg->hp_outs > 1) {
+ if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_HP_SWITCH,
"Headphone as Line Out Switch",
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
}
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable);
+
static int stac92xx_init(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int gpio;
int i;
snd_hda_sequence_write(codec, spec->init);
snd_hda_codec_write_cache(codec,
spec->adc_nids[i], 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+
+ /* set up GPIO */
+ gpio = spec->gpio_data;
+ /* turn on EAPD statically when spec->eapd_switch isn't set.
+ * otherwise, unsol event will turn it on/off dynamically
+ */
+ if (!spec->eapd_switch)
+ gpio |= spec->eapd_mask;
+ stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, gpio);
+
/* set up pins */
if (spec->hp_detect) {
/* Enable unsolicited responses on the HP widget */
for (i = 0; i < spec->num_dmics; i++)
stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i],
AC_PINCTL_IN_EN);
+ if (cfg->dig_out_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
+ AC_PINCTL_OUT_EN);
+ if (cfg->dig_in_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
+ AC_PINCTL_IN_EN);
for (i = 0; i < spec->num_pwrs; i++) {
- int event = is_nid_hp_pin(cfg, spec->pwr_nids[i])
- ? STAC_HP_EVENT : STAC_PWR_EVENT;
- int pinctl = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
- int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
- def_conf = get_defcfg_connect(def_conf);
+ hda_nid_t nid = spec->pwr_nids[i];
+ int pinctl, def_conf;
+ int event = STAC_PWR_EVENT;
+
+ if (is_nid_hp_pin(cfg, nid) && spec->hp_detect)
+ continue; /* already has an unsol event */
+
+ pinctl = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* outputs are only ports capable of power management
* any attempts on powering down a input port cause the
* referenced VREF to act quirky.
*/
if (pinctl & AC_PINCTL_IN_EN)
continue;
+ def_conf = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONFIG_DEFAULT, 0);
+ def_conf = get_defcfg_connect(def_conf);
/* skip any ports that don't have jacks since presence
* detection is useless */
- if (def_conf && def_conf != AC_JACK_PORT_FIXED)
+ if (def_conf != AC_JACK_PORT_COMPLEX) {
+ if (def_conf != AC_JACK_PORT_NONE)
+ stac_toggle_power_map(codec, nid, 1);
continue;
+ }
enable_pin_detect(codec, spec->pwr_nids[i], event | i);
codec->patch_ops.unsol_event(codec, (event | i) << 26);
}
if (spec->dac_list)
stac92xx_power_down(codec);
- if (cfg->dig_out_pin)
- stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
- AC_PINCTL_OUT_EN);
- if (cfg->dig_in_pin)
- stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
- AC_PINCTL_IN_EN);
-
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data);
-
return 0;
}
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data &
~spec->eapd_mask);
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data |
spec->eapd_mask);
}
}
-static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable)
{
struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->pwr_nids[idx];
- int presence, val;
- val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0)
- & 0x000000ff;
- presence = get_hp_pin_presence(codec, nid);
+ unsigned int idx, val;
+
+ for (idx = 0; idx < spec->num_pwrs; idx++) {
+ if (spec->pwr_nids[idx] == nid)
+ break;
+ }
+ if (idx >= spec->num_pwrs)
+ return;
/* several codecs have two power down bits */
if (spec->pwr_mapping)
else
idx = 1 << idx;
- if (presence)
+ val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
+ if (enable)
val &= ~idx;
else
val |= idx;
/* power down unused output ports */
snd_hda_codec_write(codec, codec->afg, 0, 0x7ec, val);
-};
+}
+
+static void stac92xx_pin_sense(struct hda_codec *codec, hda_nid_t nid)
+{
+ stac_toggle_power_map(codec, nid, get_hp_pin_presence(codec, nid));
+}
static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res)
{
case STAC_DELL_EQ:
spec->init = dell_eq_core_init;
/* fallthru */
- case STAC_DELL_M6:
+ case STAC_DELL_M6_AMIC:
+ case STAC_DELL_M6_DMIC:
+ case STAC_DELL_M6_BOTH:
spec->num_smuxes = 0;
spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
+ spec->eapd_switch = 0;
spec->num_amps = 1;
if (!spec->init)
spec->init = dell_m6_core_init;
- switch (codec->subsystem_id) {
- case 0x1028025e: /* Analog Mics */
- case 0x1028025f:
+ switch (spec->board_config) {
+ case STAC_DELL_M6_AMIC: /* Analog Mics */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
spec->num_dmics = 0;
spec->private_dimux.num_items = 1;
break;
- case 0x10280271: /* Digital Mics */
- case 0x10280272:
- case 0x10280254:
- case 0x10280255:
+ case STAC_DELL_M6_DMIC: /* Digital Mics */
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
spec->private_dimux.num_items = 2;
break;
- case 0x10280256: /* Both */
- case 0x10280057:
+ case STAC_DELL_M6_BOTH: /* Both */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
default:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+ spec->eapd_switch = 1;
}
if (spec->board_config > STAC_92HD73XX_REF) {
/* GPIO0 High = Enable EAPD */
static int stac92hd71xx_suspend(struct hda_codec *codec, pm_message_t state)
{
+ struct sigmatel_spec *spec = codec->spec;
+
stac92hd71xx_set_power_state(codec, AC_PWRST_D3);
+ if (spec->eapd_mask)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data &
+ ~spec->eapd_mask);
return 0;
};
switch (spec->board_config) {
case STAC_HP_M4:
- spec->num_dmics = 0;
- spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
-
/* enable internal microphone */
stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
stac92xx_auto_set_pinctl(codec, 0x0e,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
+ /* fallthru */
+ case STAC_DELL_M4_2:
+ spec->num_dmics = 0;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
+ break;
+ case STAC_DELL_M4_1:
+ case STAC_DELL_M4_3:
+ spec->num_dmics = 1;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
spec->num_pwrs = 0;
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
if (!err) {
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
spec->multiout.dac_nids = spec->dac_nids;
switch (spec->board_config){
config SND_SOC_MPC5200_I2S
tristate "Freescale MPC5200 PSC in I2S mode driver"
+ depends on SND_SOC && PPC_MPC52xx && PPC_BESTCOMM
select SND_SOC_OF_SIMPLE
- depends on SND_SOC && PPC_MPC52xx
+ select PPC_BESTCOMM_GEN_BD
help
Say Y here to support the MPC5200 PSCs in I2S mode.
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
#include <sound/soc.h>
#include <mach/hardware.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/audio.h>
void unregister_sound_midi(int unit)
{
- return sound_remove_unit(&chains[2], unit);
+ sound_remove_unit(&chains[2], unit);
}
EXPORT_SYMBOL(unregister_sound_midi);
void unregister_sound_dsp(int unit)
{
- return sound_remove_unit(&chains[3], unit);
+ sound_remove_unit(&chains[3], unit);
}
return NULL;
}
-int soundcore_open(struct inode *inode, struct file *file)
+static int soundcore_open(struct inode *inode, struct file *file)
{
int chain;
int unit = iminor(inode);