Also many plat_timer_setup() can be killed too.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
        /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
        mips_hpt_frequency = hz;
 }
-
-void __init
-plat_timer_setup(struct irqaction *irq)
-{
-       /* Enable the timer interrupt */
-       setup_irq(7, irq);
-}
 
        mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-       /* we are using the cpu counter for timer interrupts */
-       setup_irq(CPU_IRQ_BASE + 7, irq);
-}
-
 static void markeins_board_init(void);
 extern void markeins_irq_setup(void);
 
 
 unsigned int memsize;
 unsigned int highmemsize = 0;
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-       setup_irq(MIPS_CPU_IRQ_BASE + 7, irq);
-}
-
 void __init plat_time_init(void)
 {
        /* setup mips r4k timer */
 
 #ifdef CONFIG_IRQ_MSP_CIC
        /* we are using the vpe0 counter for timer interrupts */
        setup_irq(MSP_INT_VPE0_TIMER, irq);
-#else
-       /* we are using the mips counter for timer interrupts */
-       setup_irq(MSP_INT_TIMER, irq);
 #endif
 }
 
        return 0;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-       setup_irq(7, irq);
-}
-
 void __init plat_time_init(void)
 {
        mips_hpt_frequency = cpu_clock_freq / 2;
 
        setup_pit_timer();
 }
 
-/*
- * R4k counter based timer interrupt. Works on RM200-225 and possibly
- * others but not on RM400
- */
-static void __init sni_cpu_timer_setup(struct irqaction *irq)
-{
-        setup_irq(SNI_MIPS_IRQ_CPU_TIMER, irq);
-}
-
 void __init plat_timer_setup(struct irqaction *irq)
 {
        switch (sni_brd_type) {
        case SNI_BRD_MINITOWER:
                sni_a20r_timer_setup(irq);
                break;
-
-       case SNI_BRD_PCI_TOWER:
-       case SNI_BRD_RM200:
-       case SNI_BRD_PCI_MTOWER:
-       case SNI_BRD_PCI_DESKTOP:
-       case SNI_BRD_PCI_TOWER_CPLUS:
-       case SNI_BRD_PCI_MTOWER_CPLUS:
-               sni_cpu_timer_setup(irq);
-               break;
        }
 }
 
 
 #endif
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-       setup_irq(TX4927_IRQ_CPU_TIMER, irq);
-
-#ifdef CONFIG_TOSHIBA_RBTX4927
-       {
-               extern void toshiba_rbtx4927_timer_setup(struct irqaction
-                                                        *irq);
-               toshiba_rbtx4927_timer_setup(irq);
-       }
-#endif
-
-       return;
-}
-
-
 #ifdef DEBUG
 void print_cp0(char *key, int num, char *name, u32 val)
 {
 
 #define TOSHIBA_RBTX4927_SETUP_EFWFU       ( 1 <<  3 )
 #define TOSHIBA_RBTX4927_SETUP_SETUP       ( 1 <<  4 )
 #define TOSHIBA_RBTX4927_SETUP_TIME_INIT   ( 1 <<  5 )
-#define TOSHIBA_RBTX4927_SETUP_TIMER_SETUP ( 1 <<  6 )
 #define TOSHIBA_RBTX4927_SETUP_PCIBIOS     ( 1 <<  7 )
 #define TOSHIBA_RBTX4927_SETUP_PCI1        ( 1 <<  8 )
 #define TOSHIBA_RBTX4927_SETUP_PCI2        ( 1 <<  9 )
     (TOSHIBA_RBTX4927_SETUP_NONE | TOSHIBA_RBTX4927_SETUP_INFO |
      TOSHIBA_RBTX4927_SETUP_WARN | TOSHIBA_RBTX4927_SETUP_EROR |
      TOSHIBA_RBTX4927_SETUP_EFWFU | TOSHIBA_RBTX4927_SETUP_SETUP |
-     TOSHIBA_RBTX4927_SETUP_TIME_INIT | TOSHIBA_RBTX4927_SETUP_TIMER_SETUP
      | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 |
      TOSHIBA_RBTX4927_SETUP_PCI2 | TOSHIBA_RBTX4927_SETUP_PCI66);
 #endif
 
 }
 
-void __init toshiba_rbtx4927_timer_setup(struct irqaction *irq)
-{
-       TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP,
-                                      "-\n");
-       TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP,
-                                      "+\n");
-}
-
 static int __init toshiba_rbtx4927_rtc_init(void)
 {
        static struct resource __initdata res = {
 
 {
        toshiba_rbtx4938_setup();
 }
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-       setup_irq(TX4938_IRQ_CPU_TIMER, irq);
-}
 
                mips_hpt_frequency = tclock / 4;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-       setup_irq(TIMER_IRQ, irq);
-}
-
 void __init plat_mem_setup(void)
 {
        vr41xx_calculate_clock_frequency();
 
 #define A20R_PT_TIM0_ACK        0xbc050000
 #define A20R_PT_TIM1_ACK        0xbc060000
 
-#define SNI_MIPS_IRQ_CPU_TIMER  (MIPS_CPU_IRQ_BASE+7)
-
 #define SNI_A20R_IRQ_BASE       MIPS_CPU_IRQ_BASE
 #define SNI_A20R_IRQ_TIMER      (SNI_A20R_IRQ_BASE+5)