Thomas Graf <tgraf@suug.ch>
Tony Luck <tony.luck@intel.com>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
--- /dev/null
+What: /sys/class/gpio/
+Date: July 2008
+KernelVersion: 2.6.27
+Contact: David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+ As a Kconfig option, individual GPIO signals may be accessed from
+ userspace. GPIOs are only made available to userspace by an explicit
+ "export" operation. If a given GPIO is not claimed for use by
+ kernel code, it may be exported by userspace (and unexported later).
+ Kernel code may export it for complete or partial access.
+
+ GPIOs are identified as they are inside the kernel, using integers in
+ the range 0..INT_MAX. See Documentation/gpio.txt for more information.
+
+ /sys/class/gpio
+ /export ... asks the kernel to export a GPIO to userspace
+ /unexport ... to return a GPIO to the kernel
+ /gpioN ... for each exported GPIO #N
+ /value ... always readable, writes fail for input GPIOs
+ /direction ... r/w as: in, out (default low); write: high, low
+ /gpiochipN ... for each gpiochip; #N is its first GPIO
+ /base ... (r/o) same as N
+ /label ... (r/o) descriptive, not necessarily unique
+ /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
There is an exception to the above. If hotplug functionality is used
to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs. When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well. In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline. User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus. But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching. In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs. When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well. In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
There is a second exception to the above. GFP_ATOMIC requests are
kernel internal allocations that must be satisfied, immediately.
controlled by a kernel/module/sysfs/sysctl parameter.
Who: Krzysztof Piotr Oledzki <ole@ans.pl>
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why: The 2.6 kernel supports direct writing to ide CD drives, which
+ eliminates the need for ide-scsi. The new method is more
+ efficient in every way.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
void (*kill_sb) (struct super_block *);
locking rules:
may block BKL
-get_sb yes yes
-kill_sb yes yes
+get_sb yes no
+kill_sb yes no
->get_sb() returns error or 0 with locked superblock attached to the vfsmount
(exclusive on ->s_umount).
unlocked_ioctl: no (see below)
compat_ioctl: no
mmap: no
-open: maybe (see below)
+open: no
flush: no
release: no
fsync: no (see below)
aio_fsync: no
-fasync: yes (see below)
+fasync: no
lock: yes
readv: no
writev: no
semaphore. Note some filesystems (i.e. remote ones) provide no
protection for i_size so you will need to use the BKL.
-->open() locking is in-transit: big lock partially moved into the methods.
-The only exception is ->open() in the instances of file_operations that never
-end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
-(chrdev_open() takes lock before replacing ->f_op and calling the secondary
-method. As soon as we fix the handling of module reference counters all
-instances of ->open() will be called without the BKL.
-
Note: ext2_release() was *the* source of contention on fs-intensive
loads and dropping BKL on ->release() helps to get rid of that (we still
grab BKL for cases when we close a file that had been opened r/w, but that
- (bit 1) anonymous shared memory
- (bit 2) file-backed private memory
- (bit 3) file-backed shared memory
+ - (bit 4) ELF header pages in file-backed private memory areas (it is
+ effective only if the bit 2 is cleared)
Note that MMIO pages such as frame buffer are never dumped and vDSO pages
are always dumped regardless of the bitmask status.
S: Supported
ACPI WMI DRIVER
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
-L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
-S: Maintained
+P: Carlos Corbacho
+M: carlos@strangeworlds.co.uk
+L: linux-acpi@vger.kernel.org
+W: http://www.lesswatts.org/projects/acpi/
+S: Maintained
AD1889 ALSA SOUND DRIVER
-P: Kyle McMartin
-M: kyle@mcmartin.ca
-P: Thibaut Varene
-M: T-Bone@parisc-linux.org
-W: http://wiki.parisc-linux.org/AD1889
-L: linux-parisc@vger.kernel.org
-S: Maintained
+P: Kyle McMartin
+M: kyle@mcmartin.ca
+P: Thibaut Varene
+M: T-Bone@parisc-linux.org
+W: http://wiki.parisc-linux.org/AD1889
+L: linux-parisc@vger.kernel.org
+S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
S: Maintained
ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P: Andrew Victor
-M: linux@maxim.org.za
-L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W: http://maxim.org.za/at91_26.html
-S: Maintained
+P: Andrew Victor
+M: linux@maxim.org.za
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://maxim.org.za/at91_26.html
+S: Maintained
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
P: Lennert Buytenhek
S: Maintained
ARM/HP JORNADA 7XX MACHINE SUPPORT
-P: Kristoffer Ericson
-M: kristoffer.ericson@gmail.com
-W: www.jlime.com
-S: Maintained
+P: Kristoffer Ericson
+M: kristoffer.ericson@gmail.com
+W: www.jlime.com
+S: Maintained
ARM/INTEL IOP32X ARM ARCHITECTURE
P: Lennert Buytenhek
M: syrjala@sci.fi
S: Maintained
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
P: Jay Cliburn
M: jcliburn@gmail.com
P: Chris Snook
M: csnook@redhat.com
+P: Jie Yang
+M: jie.yang@atheros.com
L: atl1-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
S: Maintained
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P: Jonathan Corbet
+P: Jonathan Corbet
M: corbet@lwn.net
L: video4linux-list@redhat.com
S: Maintained
M: Eng.Linux@digi.com
L: Eng.Linux@digi.com
W: http://www.digi.com
-S: Orphaned
+S: Orphan
DIRECTORY NOTIFICATION
P: Stephen Rothwell
S: Supported
DOCUMENTATION (/Documentation directory)
-P: Michael Kerrisk
-M: mtk.manpages@gmail.com
-P: Randy Dunlap
-M: rdunlap@xenotime.net
-L: linux-doc@vger.kernel.org
-S: Maintained
+P: Michael Kerrisk
+M: mtk.manpages@gmail.com
+P: Randy Dunlap
+M: rdunlap@xenotime.net
+L: linux-doc@vger.kernel.org
+S: Maintained
DOUBLETALK DRIVER
P: James R. Van Zandt
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
M: v4l-dvb-maintainer@linuxtv.org
-L: linux-dvb@linuxtv.org (subscription required)
+L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
P: Rik Faith
M: faith@cs.unc.edu
L: linux-scsi@vger.kernel.org
-S: Odd fixes (e.g., new signatures)
+S: Odd Fixes (e.g., new signatures)
GDT SCSI DISK ARRAY CONTROLLER DRIVER
P: Achim Leubner
HARDWARE MONITORING
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
-S: Orphaned
+S: Orphan
HARDWARE RANDOM NUMBER GENERATOR CORE
-S: Orphaned
+S: Orphan
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
P: Robert Love
P: Sean Hefty
M: sean.hefty@intel.com
P: Hal Rosenstock
-M: hal.rosenstock@gmail.com
+M: hal.rosenstock@gmail.com
L: general@lists.openfabrics.org
W: http://www.openib.org/
T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
MARVELL YUKON / SYSKONNECT DRIVER
P: Mirko Lindner
-M: mlindner@syskonnect.de
+M: mlindner@syskonnect.de
P: Ralph Roesler
-M: rroesler@syskonnect.de
-W: http://www.syskonnect.com
-S: Supported
+M: rroesler@syskonnect.de
+W: http://www.syskonnect.com
+S: Supported
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
P: Michael Kerrisk
M: mtk.manpages@gmail.com
-W: http://www.kernel.org/doc/man-pages
-S: Supported
+W: http://www.kernel.org/doc/man-pages
+S: Supported
MARVELL LIBERTAS WIRELESS DRIVER
P: Dan Williams
MEGARAID SCSI DRIVERS
P: Neela Syam Kolli
M: megaraidlinux@lsi.com
-S: linux-scsi@vger.kernel.org
+L: linux-scsi@vger.kernel.org
W: http://megaraid.lsilogic.com
S: Maintained
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-kernel@vger.kernel.org
-S: Odd fixes
+S: Odd Fixes
MULTISOUND SOUND DRIVER
P: Andrew Veliath
S: Maintained
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P: Felipe Balbi
-M: felipe.balbi@nokia.com
-L: linux-usb@vger.kernel.org
-S: Maintained
+P: Felipe Balbi
+M: felipe.balbi@nokia.com
+L: linux-usb@vger.kernel.org
+S: Maintained
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
P: Andrew Gallatin
S: Supported
NATSEMI ETHERNET DRIVER (DP8381x)
-P: Tim Hockin
+P: Tim Hockin
M: thockin@hockin.org
S: Maintained
S: Maintained
OMNIVISION OV7670 SENSOR DRIVER
-P: Jonathan Corbet
+P: Jonathan Corbet
M: corbet@lwn.net
L: video4linux-list@redhat.com
S: Maintained
S: Supported
PCI HOTPLUG CORE
-P: Kristen Carlson Accardi
+P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
S: Supported
P: Eric Paris
M: eparis@parisplace.org
L: linux-kernel@vger.kernel.org (kernel issues)
-L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
+L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://www.nsa.gov/selinux
S: Supported
S: Maintained
SOC-CAMERA V4L2 SUBSYSTEM
-P: Guennadi Liakhovetski
-M: g.liakhovetski@gmx.de
-L: video4linux-list@redhat.com
-S: Maintained
+P: Guennadi Liakhovetski
+M: g.liakhovetski@gmx.de
+L: video4linux-list@redhat.com
+S: Maintained
SOFTWARE RAID (Multiple Disks) SUPPORT
P: Ingo Molnar
STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
W: http://mosquitonet.Stanford.EDU/strip.html
-S: Unsupported ?
+S: Orphan
STRADIS MPEG-2 DECODER DRIVER
P: Nathan Laredo
S: Maintained
TI FLASH MEDIA INTERFACE DRIVER
-P: Alex Dubov
-M: oakad@yahoo.com
-S: Maintained
+P: Alex Dubov
+M: oakad@yahoo.com
+S: Maintained
TI OMAP MMC INTERFACE DRIVER
P: Carlos Aguiar, Anderson Briglia and Syed Khasim
P: Pete Zaitcev
M: zaitcev@redhat.com
L: linux-kernel@vger.kernel.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB CDC ETHERNET DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://www.kroah.com/linux-usb/
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB ET61X[12]51 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB GADGET/PERIPHERAL SUBSYSTEM
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
S: Maintained
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
P: Jiri Kosina
M: jkosina@suse.cz
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
USB ISP116X DRIVER
P: Olav Kongas
M: ok@artecdesign.ee
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB KAWASAKI LSI DRIVER
P: Oliver Neukum
M: oliver@neukum.name
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB MASS STORAGE DRIVER
P: Matthew Dharm
M: mdharm-usb@one-eyed-alien.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
USB OHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB OPTION-CARD DRIVER
P: Matthias Urlichs
M: smurf@smurf.noris.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB OV511 DRIVER
P: Mark McClelland
M: mmcclell@bigfoot.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://alpha.dyndns.org/ov511/
S: Maintained
USB PEGASUS DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
USB PRINTER DRIVER (usblp)
P: Pete Zaitcev
M: zaitcev@redhat.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB RTL8150 DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
USB SE401 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.chello.nl/~j.vreeken/se401/
S: Maintained
USB SERIAL BELKIN F5U103 DRIVER
P: William Greathouse
M: wgreathouse@smva.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL CYPRESS M8 DRIVER
P: Lonnie Mendez
M: dignome@gmail.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://geocities.com/i0xox0i
W: http://firstlight.net/cvs
P: Peter Berger and Al Borchers
M: pberger@brimson.com
M: alborchers@steinerpoint.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL DRIVER
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
P: Gary Brubaker
M: xavyer@ix.netcom.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL KEYSPAN DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
USB SERIAL WHITEHEAT DRIVER
P: Support Department
M: support@connecttech.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
USB SN9C1xx DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB SUBSYSTEM
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
USB UHCI DRIVER
P: Alan Stern
M: stern@rowland.harvard.edu
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB "USBNET" DRIVER FRAMEWORK
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
-L: linx-uvc-devel@berlios.de
+L: linux-uvc-devel@lists.berlios.de
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained
USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZD1201 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Maintained
USB ZR364XX DRIVER
P: Antoine Jacquet
M: royale@zerezo.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://royale.zerezo.com/zr364xx/
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
NAME = Rotary Wombat
# *DOCUMENTATION*
* The networking and block device layers use this boolean for bounce
* buffer decisions.
*/
-#define PCI_DMA_BUS_IS_PHYS (0)
+#define PCI_DMA_BUS_IS_PHYS (1)
/*
* Whether pci_unmap_{single,page} is a nop depends upon the
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
- if (id < 0)
- return;
-
mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
if (enable)
mdctl |= 0x00000003; /* Enable Module */
};
static struct imxuart_platform_data uart_pdata = {
- .flags = 0,
+ .flags = IMXUART_HAVE_RTSCTS,
};
static struct platform_device *devices[] __initdata = {
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
+#include "clock.h"
#include "devices.h"
static unsigned long tosa_pin_config[] = {
.wakeup = 1,
.active_low = 1,
},
+ {
+ .type = EV_SW,
+ .code = SW_HEADPHONE_INSERT,
+ .gpio = TOSA_GPIO_EAR_IN,
+ .desc = "HeadPhone insert",
+ .active_low = 1,
+ .debounce_interval = 300,
+ },
};
static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
pxa_set_i2c_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
+ clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
/*
* arch/arm/mach-sa1100/include/mach/jornada720.h
*
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
*
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ * Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define PWMOFF 0xDF
#define TXDUMMY 0x11
#define ERRORCODE 0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/hardware/ssp.h>
#include <mach/jornada720.h>
+#include <asm/hardware/ssp.h>
static DEFINE_SPINLOCK(jornada_ssp_lock);
static unsigned long jornada_ssp_flags;
* jornada_ssp_start - enable mcu
*
*/
-int jornada_ssp_start()
+void jornada_ssp_start(void)
{
spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
GPCR = GPIO_GPIO25;
udelay(50);
- return 0;
+ return;
};
EXPORT_SYMBOL(jornada_ssp_start);
* jornada_ssp_end - disable mcu and turn off lock
*
*/
-int jornada_ssp_end()
+void jornada_ssp_end(void)
{
GPSR = GPIO_GPIO25;
spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
- return 0;
+ return;
};
EXPORT_SYMBOL(jornada_ssp_end);
#include <mach/tc.h>
#include <mach/board.h>
+#include <mach/mmc.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MMC1_BASE 0x4809c000
-#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc)
+#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+
+#define OMAP_MMC2_BASE 0x480b4000
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc)
+#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ
+
#else
+
#define OMAP_MMC1_BASE 0xfffb7800
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f)
#define OMAP_MMC1_INT INT_MMC
-#endif
+
#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f)
+#define OMAP_MMC2_INT INT_1610_MMC2
+
+#endif
-static struct omap_mmc_conf mmc1_conf;
+static struct omap_mmc_platform_data mmc1_data;
static u64 mmc1_dmamask = 0xffffffff;
static struct resource mmc1_resources[] = {
{
.start = OMAP_MMC1_BASE,
- .end = OMAP_MMC1_BASE + 0x7f,
+ .end = OMAP_MMC1_END,
.flags = IORESOURCE_MEM,
},
{
.id = 1,
.dev = {
.dma_mask = &mmc1_dmamask,
- .platform_data = &mmc1_conf,
+ .platform_data = &mmc1_data,
},
.num_resources = ARRAY_SIZE(mmc1_resources),
.resource = mmc1_resources,
};
-#ifdef CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
static u64 mmc2_dmamask = 0xffffffff;
static struct resource mmc2_resources[] = {
{
.start = OMAP_MMC2_BASE,
- .end = OMAP_MMC2_BASE + 0x7f,
+ .end = OMAP_MMC2_END,
.flags = IORESOURCE_MEM,
},
{
- .start = INT_1610_MMC2,
+ .start = OMAP_MMC2_INT,
.flags = IORESOURCE_IRQ,
},
};
.id = 2,
.dev = {
.dma_mask = &mmc2_dmamask,
- .platform_data = &mmc2_conf,
+ .platform_data = &mmc2_data,
},
.num_resources = ARRAY_SIZE(mmc2_resources),
.resource = mmc2_resources,
};
#endif
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
{
- const struct omap_mmc_config *mmc_conf;
- const struct omap_mmc_conf *mmc;
-
- /* NOTE: assumes MMC was never (wrongly) enabled */
- mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
- if (!mmc_conf)
+ if (cpu_is_omap2430() || cpu_is_omap34xx())
return;
- /* block 1 is always available and has just one pinout option */
- mmc = &mmc_conf->mmc[0];
- if (mmc->enabled) {
+ if (mmc_conf->mmc[0].enabled) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H18_24XX_MMC_CMD);
omap_cfg_reg(H15_24XX_MMC_CLKI);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
}
- if (mmc->wire4) {
+ if (mmc_conf->mmc[0].wire4) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H14_24XX_MMC_DAT1);
omap_cfg_reg(E19_24XX_MMC_DAT2);
} else {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
- if (!mmc->nomux)
+ if (!mmc_conf->mmc[0].nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
- mmc1_conf = *mmc;
- (void) platform_device_register(&mmc_omap_device1);
}
#ifdef CONFIG_ARCH_OMAP16XX
/* block 2 is on newer chips, and has many pinout options */
- mmc = &mmc_conf->mmc[1];
- if (mmc->enabled) {
- if (!mmc->nomux) {
+ if (mmc_conf->mmc[1].enabled) {
+ if (!mmc_conf->mmc[1].nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
- if (mmc->wire4) {
+ if (mmc_conf->mmc[1].wire4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
- mmc2_conf = *mmc;
+ }
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+ const struct omap_mmc_config *mmc_conf;
+
+ /* NOTE: assumes MMC was never (wrongly) enabled */
+ mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+ if (!mmc_conf)
+ return;
+
+ omap_init_mmc_conf(mmc_conf);
+
+ if (mmc_conf->mmc[0].enabled) {
+ mmc1_data.conf = mmc_conf->mmc[0];
+ (void) platform_device_register(&mmc_omap_device1);
+ }
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ if (mmc_conf->mmc[1].enabled) {
+ mmc2_data.conf = mmc_conf->mmc[1];
(void) platform_device_register(&mmc_omap_device2);
}
#endif
- return;
}
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+ switch (host) {
+ case 1:
+ mmc1_data = *info;
+ break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ case 2:
+ mmc2_data = *info;
+ break;
+#endif
+ default:
+ BUG();
+ }
+}
+
#else
static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
#endif
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_mci(0, MCI_PDATA);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
--- /dev/null
+uImage
+uImage.srec
+vmlinux.cso
+sfdwarf.log
--- /dev/null
+vmlinux.lds
EXPORT_SYMBOL(find_next_zero_bit);
EXPORT_SYMBOL(find_first_bit);
EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_le_bit);
EXPORT_SYMBOL(generic_find_next_zero_le_bit);
/* I/O primitives (lib/io-*.S) */
rcall sys_epoll_pwait
sub sp, -4
popm pc
+
+ .global __sys_sync_file_range
+ .type __sys_sync_file_range,@function
+__sys_sync_file_range:
+ pushm lr
+ st.w --sp, ARG6
+ rcall sys_sync_file_range
+ sub sp, -4
+ popm pc
.long sys_set_robust_list
.long sys_get_robust_list /* 260 */
.long __sys_splice
- .long sys_sync_file_range
+ .long __sys_sync_file_range
.long sys_tee
.long sys_vmsplice
.long __sys_epoll_pwait /* 265 */
switch (ret) {
case NOTIFY_OK:
case NOTIFY_STOP:
- return;
+ break;
case NOTIFY_BAD:
die("Fatal Non-Maskable Interrupt", regs, SIGINT);
default:
+ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+ nmi_disable();
break;
}
-
- printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
- nmi_disable();
+ nmi_exit();
}
asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
brgt 1b
retal r11
+ENTRY(generic_find_next_le_bit)
+ lsr r8, r10, 5
+ sub r9, r11, r10
+ retle r11
+
+ lsl r8, 2
+ add r12, r8
+ andl r10, 31, COH
+ breq 1f
+
+ /* offset is not word-aligned. Handle the first (32 - r10) bits */
+ ldswp.w r8, r12[0]
+ sub r12, -4
+ lsr r8, r8, r10
+ brne .L_found
+
+ /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */
+ add r9, r10
+ sub r9, 32
+ retle r11
+
+ /* Main loop. offset must be word-aligned */
+1: ldswp.w r8, r12[0]
+ cp.w r8, 0
+ brne .L_found
+ sub r12, -4
+ sub r9, 32
+ brgt 1b
+ retal r11
+
ENTRY(generic_find_next_zero_le_bit)
lsr r8, r10, 5
sub r9, r11, r10
} \
} while (0)
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+ uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+ uint64_t ip;
+ uint64_t gp;
+};
+
#endif /* _ASM_IA64_ELF_H */
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
extern char __start_unwind[], __end_unwind[];
extern char __start_ivt_text[], __end_ivt_text[];
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->ip, p))
+ ptr = p;
+ return ptr;
+}
+
+
#endif /* _ASM_IA64_SECTIONS_H */
* until the transfer is complete. In order to get the asynch
* version of bte_copy, you must perform this check yourself.
*/
-#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
- (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \
- (dest & L1_CACHE_MASK)) ? \
- bte_unaligned_copy(src, dest, len, mode) : \
+#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
+ (((len & (L1_CACHE_BYTES - 1)) || \
+ (src & (L1_CACHE_BYTES - 1)) || \
+ (dest & (L1_CACHE_BYTES - 1))) ? \
+ bte_unaligned_copy(src, dest, len, mode) : \
bte_copy(src, dest, len, mode, NULL))
#undef N
-struct got_entry {
- uint64_t val;
-};
-
-struct fdesc {
- uint64_t ip;
- uint64_t gp;
-};
-
/* Opaque struct for insns, to protect against derefs. */
struct insn;
return -EBUSY;
}
- cpu_clear(cpu, cpu_online_map);
-
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
return (-EBUSY);
}
remove_siblinginfo(cpu);
- cpu_clear(cpu, cpu_online_map);
fixup_irqs();
+ cpu_clear(cpu, cpu_online_map);
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/tlb.h>
+#include <asm/elf.h>
#include "misc.h"
#include "vti.h"
{ NULL }
};
-
-struct fdesc{
- unsigned long ip;
- unsigned long gp;
-};
-
static void kvm_flush_icache(unsigned long start, unsigned long len)
{
int l;
entry = find_next_zero_bit(map, mapsize, last_entry);
}
- if (entry > mapsize)
+ if (entry > mapsize) {
+ kfree(ca_dmamap);
goto map_return;
+ }
for (i = 0; i < entries; i++)
set_bit(entry + i, map);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_FALCON_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_ATARI_SCSI=y
# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_MAC_IDE=y
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_MVME16x_SCSI=y
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_HYDRA=m
CONFIG_ZORRO8390=m
CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
CONFIG_MAC8390=y
CONFIG_MAC89x0=m
CONFIG_MACSONIC=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND_PAULA=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_GENERIC_ISA_DMA=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_Q40=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
local_irq_enable();
}
-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
- __asm__(" .set mips3 \n"
- " wait \n"
- " .set mips0 \n");
-}
+extern void r4k_wait(void);
/*
* This variant is preferable as it allows testing need_resched and going to
__setup("nowait", wait_disable);
-static inline void check_wait(void)
+void __init check_wait(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
void __init check_bugs32(void)
{
- check_wait();
check_errata();
}
#include <asm/stackframe.h>
#include <asm/war.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
#define PANIC_PIC(msg) \
.set push; \
__FINIT
+ .align 5 /* 32 byte rollback region */
+LEAF(r4k_wait)
+ .set push
+ .set noreorder
+ /* start of rollback region */
+ LONG_L t0, TI_FLAGS($28)
+ nop
+ andi t0, _TIF_NEED_RESCHED
+ bnez t0, 1f
+ nop
+ nop
+ nop
+ .set mips3
+ wait
+ /* end of rollback region (the region size must be power of two) */
+ .set pop
+1:
+ jr ra
+ END(r4k_wait)
+
+ .macro BUILD_ROLLBACK_PROLOGUE handler
+ FEXPORT(rollback_\handler)
+ .set push
+ .set noat
+ MFC0 k0, CP0_EPC
+ PTR_LA k1, r4k_wait
+ ori k0, 0x1f /* 32 byte rollback region */
+ xori k0, 0x1f
+ bne k0, k1, 9f
+ MTC0 k0, CP0_EPC
+9:
+ .set pop
+ .endm
+
.align 5
+BUILD_ROLLBACK_PROLOGUE handle_int
NESTED(handle_int, PT_SIZE, sp)
#ifdef CONFIG_TRACE_IRQFLAGS
/*
* This prototype is copied to ebase + n*IntCtl.VS and patched
* to invoke the handler
*/
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
NESTED(except_vec_vi, 0, sp)
SAVE_SOME
SAVE_AT
clear_tsk_thread_flag(p, TIF_USEDFPU);
#ifdef CONFIG_MIPS_MT_FPAFF
+ clear_tsk_thread_flag(p, TIF_FPUBOUND);
+
/*
* FPU affinity support is cleaner if we track the
* user-visible CPU affinity from the very beginning.
#include <asm/types.h>
#include <asm/stacktrace.h>
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
extern asmlinkage void handle_int(void);
extern asmlinkage void handle_tlbm(void);
extern asmlinkage void handle_tlbl(void);
extern char except_vec_vi, except_vec_vi_lui;
extern char except_vec_vi_ori, except_vec_vi_end;
+ extern char rollback_except_vec_vi;
+ char *vec_start = (cpu_wait == r4k_wait) ?
+ &rollback_except_vec_vi : &except_vec_vi;
#ifdef CONFIG_MIPS_MT_SMTC
/*
* We need to provide the SMTC vectored interrupt handler
* Status.IM bit to be masked before going there.
*/
extern char except_vec_vi_mori;
- const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+ const int mori_offset = &except_vec_vi_mori - vec_start;
#endif /* CONFIG_MIPS_MT_SMTC */
- const int handler_len = &except_vec_vi_end - &except_vec_vi;
- const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
- const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+ const int handler_len = &except_vec_vi_end - vec_start;
+ const int lui_offset = &except_vec_vi_lui - vec_start;
+ const int ori_offset = &except_vec_vi_ori - vec_start;
if (handler_len > VECTORSPACING) {
/*
panic("VECTORSPACING too small");
}
- memcpy(b, &except_vec_vi, handler_len);
+ memcpy(b, vec_start, handler_len);
#ifdef CONFIG_MIPS_MT_SMTC
BUG_ON(n > 7); /* Vector index %d exceeds SMTC maximum. */
extern char except_vec3_generic, except_vec3_r4000;
extern char except_vec4;
unsigned long i;
+ int rollback;
+
+ check_wait();
+ rollback = (cpu_wait == r4k_wait);
#if defined(CONFIG_KGDB)
if (kgdb_early_setup)
if (board_be_init)
board_be_init();
- set_except_vector(0, handle_int);
+ set_except_vector(0, rollback ? rollback_handle_int : handle_int);
set_except_vector(1, handle_tlbm);
set_except_vector(2, handle_tlbl);
set_except_vector(3, handle_tlbs);
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
+ *(.text.*)
*(.fixup)
*(.gnu.warning)
} :text = 0
#ifdef USE_DOUBLE
#define LOAD ld
+#define LOAD32 lwu
#define ADD daddu
#define NBYTES 8
#else
#define LOAD lw
+#define LOAD32 lw
#define ADD addu
#define NBYTES 4
ADD sum, v1; \
.set pop
+#define ADDC32(sum,reg) \
+ .set push; \
+ .set noat; \
+ addu sum, reg; \
+ sltu v1, sum, reg; \
+ addu sum, v1; \
+ .set pop
+
#define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \
LOAD _t0, (offset + UNIT(0))(src); \
LOAD _t1, (offset + UNIT(1))(src); \
beqz t8, .Lqword_align
andi t8, src, 0x8
- lw t0, 0x00(src)
+ LOAD32 t0, 0x00(src)
LONG_SUBU a1, a1, 0x4
ADDC(sum, t0)
PTR_ADDU src, src, 0x4
LONG_SRL t8, t8, 0x2
.Lend_words:
- lw t0, (src)
+ LOAD32 t0, (src)
LONG_SUBU t8, t8, 0x1
ADDC(sum, t0)
.set reorder /* DADDI_WAR */
/* Still a full word to go */
ulw t1, (src)
PTR_ADDIU src, 4
+#ifdef USE_DOUBLE
+ dsll t1, t1, 32 /* clear lower 32bit */
+#endif
ADDC(sum, t1)
1: move t1, zero
1:
.set reorder
/* Add the passed partial csum. */
- ADDC(sum, a2)
+ ADDC32(sum, a2)
jr ra
.set noreorder
END(csum_partial)
.set pop
1:
.set reorder
- ADDC(sum, psum)
+ ADDC32(sum, psum)
jr ra
.set noreorder
return res;
/* Second HPC is missing? */
- if (!ip22_is_fullhouse() ||
+ if (ip22_is_fullhouse() ||
get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
return 0;
cascade = irq_cascade + irq;
if (cascade->get_irq != NULL) {
unsigned int source_irq = irq;
+ int ret;
desc = irq_desc + source_irq;
if (desc->chip->mask_ack)
desc->chip->mask_ack(source_irq);
desc->chip->mask(source_irq);
desc->chip->ack(source_irq);
}
- irq = cascade->get_irq(irq);
- if (irq < 0)
+ ret = cascade->get_irq(irq);
+ irq = ret;
+ if (ret < 0)
atomic_inc(&irq_err_count);
else
irq_dispatch(irq);
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
- if (in_interrupt() || !mm)
+ if (in_atomic() || !mm)
goto no_context;
down_read(&mm->mmap_sem);
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/uaccess.h>
+#include <asm/sections.h>
#include <asm/unwind.h>
#if 0
deregister_unwind_table(mod);
module_bug_cleanup(mod);
}
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+ Elf64_Fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->addr, p))
+ ptr = p;
+ return ptr;
+}
+#endif
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
-image-$(CONFIG_PPC_HOLLY) += zImage.holly
+image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <60 2>;
+ interrupts = <76 2>;
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <61 2>;
+ interrupts = <77 2>;
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <2>;
reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <62 2>;
+ interrupts = <78 2>;
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <3>;
reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <63 2>;
+ interrupts = <79 2>;
};
};
/* Keep this the last entry. */
#define R_PPC64_NUM 107
+/* There's actually a third entry here, but it's unused */
+struct ppc64_opd_entry
+{
+ unsigned long funcaddr;
+ unsigned long r2;
+};
+
#ifdef __KERNEL__
#ifdef CONFIG_SPU_BASE
#define _ASM_POWERPC_SECTIONS_H
#ifdef __KERNEL__
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
#ifdef __powerpc64__
return 0;
}
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct ppc64_opd_entry *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->funcaddr, p))
+ ptr = p;
+ return ptr;
+}
+
#endif
#endif /* __KERNEL__ */
#include <linux/vmalloc.h>
#include <linux/bug.h>
#include <asm/module.h>
-#include <asm/uaccess.h>
#include <asm/firmware.h>
#include <asm/code-patching.h>
#include <linux/sort.h>
#define DEBUGP(fmt , ...)
#endif
-/* There's actually a third entry here, but it's unused */
-struct ppc64_opd_entry
-{
- unsigned long funcaddr;
- unsigned long r2;
-};
-
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
the kernel itself). But on PPC64, these need to be used for every
jump, actually, to reset r2 (TOC+0x8000). */
u32 gprs[NUM_GPRS];
u32 acrs[NUM_ACRS];
u32 orig_gpr2;
+ /* nb: there's a 4-byte hole here */
s390_fp_regs fp_regs;
/*
* These per registers are in here so that gdb can modify them
*/
tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
+ } else if (addr < (addr_t) &dummy->regs.fp_regs) {
+ /*
+ * prevent reads of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ tmp = 0;
+
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
task_pt_regs(child)->orig_gpr2 = data;
+ } else if (addr < (addr_t) &dummy->regs.fp_regs) {
+ /*
+ * prevent writes of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ return 0;
+
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
+ } else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+ /*
+ * prevent reads of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ tmp = 0;
+
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
+ } else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+ /*
+ * prevent writess of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ return 0;
+
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
return of_bus_default_map(addr, range, na, ns, pna);
}
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
{
return IORESOURCE_MEM;
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/linkage.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/kernel_stat.h>
}
spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
}
+
+ tick_ops->disable_irq();
}
#endif
: "g1", "g2");
}
-void init_irqwork_curcpu(void)
+void notrace init_irqwork_curcpu(void)
{
int cpu = hard_smp_processor_id();
}
}
-void __cpuinit sun4v_register_mondo_queues(int this_cpu)
+void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
{
struct trap_per_cpu *tb = &trap_block[this_cpu];
{
unsigned long csr_reg, csr, csr_error_bits;
irqreturn_t ret = IRQ_NONE;
- u16 stat;
+ u16 stat, *addr;
if (is_pbm_a) {
csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
printk("%s: PCI SERR signal asserted.\n", pbm->name);
ret = IRQ_HANDLED;
}
- pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+ addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
+ 0, PCI_STATUS);
+ pci_config_read16(addr, &stat);
if (stat & (PCI_STATUS_PARITY |
PCI_STATUS_SIG_TARGET_ABORT |
PCI_STATUS_REC_TARGET_ABORT |
PCI_STATUS_SIG_SYSTEM_ERROR)) {
printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
pbm->name, stat);
- pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+ pci_config_write16(addr, 0xffff);
ret = IRQ_HANDLED;
}
return ret;
* the second will just error out since we do not pass in
* IRQF_SHARED.
*/
- err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+ err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
"PSYCHO_UE", pbm);
- err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+ err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
"PSYCHO_CE", pbm);
/* This one, however, ought not to fail. We can just warn
* about it since the system can still operate properly even
* if this fails.
*/
- err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+ err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
"PSYCHO_PCIERR", pbm);
if (err)
printk(KERN_WARNING "%s: Could not register PCIERR, "
return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
}
-#define PSYCHO_IMAP_SCSI 0x1000UL
-#define PSYCHO_IMAP_ETH 0x1008UL
-#define PSYCHO_IMAP_BPP 0x1010UL
-#define PSYCHO_IMAP_AU_REC 0x1018UL
-#define PSYCHO_IMAP_AU_PLAY 0x1020UL
-#define PSYCHO_IMAP_PFAIL 0x1028UL
-#define PSYCHO_IMAP_KMS 0x1030UL
-#define PSYCHO_IMAP_FLPY 0x1038UL
-#define PSYCHO_IMAP_SHW 0x1040UL
-#define PSYCHO_IMAP_KBD 0x1048UL
-#define PSYCHO_IMAP_MS 0x1050UL
-#define PSYCHO_IMAP_SER 0x1058UL
-#define PSYCHO_IMAP_TIM0 0x1060UL
-#define PSYCHO_IMAP_TIM1 0x1068UL
-#define PSYCHO_IMAP_UE 0x1070UL
-#define PSYCHO_IMAP_CE 0x1078UL
-#define PSYCHO_IMAP_A_ERR 0x1080UL
-#define PSYCHO_IMAP_B_ERR 0x1088UL
-#define PSYCHO_IMAP_PMGMT 0x1090UL
-#define PSYCHO_IMAP_GFX 0x1098UL
-#define PSYCHO_IMAP_EUPA 0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/ PSYCHO_IMAP_SCSI,
-/*0x21*/ PSYCHO_IMAP_ETH,
-/*0x22*/ PSYCHO_IMAP_BPP,
-/*0x23*/ PSYCHO_IMAP_AU_REC,
-/*0x24*/ PSYCHO_IMAP_AU_PLAY,
-/*0x25*/ PSYCHO_IMAP_PFAIL,
-/*0x26*/ PSYCHO_IMAP_KMS,
-/*0x27*/ PSYCHO_IMAP_FLPY,
-/*0x28*/ PSYCHO_IMAP_SHW,
-/*0x29*/ PSYCHO_IMAP_KBD,
-/*0x2a*/ PSYCHO_IMAP_MS,
-/*0x2b*/ PSYCHO_IMAP_SER,
-/*0x2c*/ PSYCHO_IMAP_TIM0,
-/*0x2d*/ PSYCHO_IMAP_TIM1,
-/*0x2e*/ PSYCHO_IMAP_UE,
-/*0x2f*/ PSYCHO_IMAP_CE,
-/*0x30*/ PSYCHO_IMAP_A_ERR,
-/*0x31*/ PSYCHO_IMAP_B_ERR,
-/*0x32*/ PSYCHO_IMAP_PMGMT,
-/*0x33*/ PSYCHO_IMAP_GFX,
-/*0x34*/ PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE 0x1000UL
+
#define PSYCHO_ONBOARD_IRQ_BASE 0x20
-#define PSYCHO_ONBOARD_IRQ_LAST 0x34
#define psycho_onboard_imap_offset(__ino) \
- __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+ (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define PSYCHO_ICLR_A_SLOT0 0x1400UL
#define PSYCHO_ICLR_SCSI 0x1800UL
imap_off = psycho_pcislot_imap_offset(ino);
} else {
/* Onboard device */
- if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
- prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = psycho_onboard_imap_offset(ino);
}
#define SABRE_IMAP_A_SLOT0 0x0c00UL
#define SABRE_IMAP_B_SLOT0 0x0c20UL
-#define SABRE_IMAP_SCSI 0x1000UL
-#define SABRE_IMAP_ETH 0x1008UL
-#define SABRE_IMAP_BPP 0x1010UL
-#define SABRE_IMAP_AU_REC 0x1018UL
-#define SABRE_IMAP_AU_PLAY 0x1020UL
-#define SABRE_IMAP_PFAIL 0x1028UL
-#define SABRE_IMAP_KMS 0x1030UL
-#define SABRE_IMAP_FLPY 0x1038UL
-#define SABRE_IMAP_SHW 0x1040UL
-#define SABRE_IMAP_KBD 0x1048UL
-#define SABRE_IMAP_MS 0x1050UL
-#define SABRE_IMAP_SER 0x1058UL
-#define SABRE_IMAP_UE 0x1070UL
-#define SABRE_IMAP_CE 0x1078UL
-#define SABRE_IMAP_PCIERR 0x1080UL
-#define SABRE_IMAP_GFX 0x1098UL
-#define SABRE_IMAP_EUPA 0x10a0UL
#define SABRE_ICLR_A_SLOT0 0x1400UL
#define SABRE_ICLR_B_SLOT0 0x1480UL
#define SABRE_ICLR_SCSI 0x1800UL
return SABRE_IMAP_B_SLOT0 + (slot * 8);
}
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/ SABRE_IMAP_SCSI,
-/*0x21*/ SABRE_IMAP_ETH,
-/*0x22*/ SABRE_IMAP_BPP,
-/*0x23*/ SABRE_IMAP_AU_REC,
-/*0x24*/ SABRE_IMAP_AU_PLAY,
-/*0x25*/ SABRE_IMAP_PFAIL,
-/*0x26*/ SABRE_IMAP_KMS,
-/*0x27*/ SABRE_IMAP_FLPY,
-/*0x28*/ SABRE_IMAP_SHW,
-/*0x29*/ SABRE_IMAP_KBD,
-/*0x2a*/ SABRE_IMAP_MS,
-/*0x2b*/ SABRE_IMAP_SER,
-/*0x2c*/ 0 /* reserved */,
-/*0x2d*/ 0 /* reserved */,
-/*0x2e*/ SABRE_IMAP_UE,
-/*0x2f*/ SABRE_IMAP_CE,
-/*0x30*/ SABRE_IMAP_PCIERR,
-/*0x31*/ 0 /* reserved */,
-/*0x32*/ 0 /* reserved */,
-/*0x33*/ SABRE_IMAP_GFX,
-/*0x34*/ SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE 0x20
-#define SABRE_ONBOARD_IRQ_LAST 0x30
+#define SABRE_OBIO_IMAP_BASE 0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE 0x20
#define sabre_onboard_imap_offset(__ino) \
- __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+ (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define sabre_iclr_offset(ino) \
((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
imap_off = sabre_pcislot_imap_offset(ino);
} else {
/* onboard device */
- if (ino > SABRE_ONBOARD_IRQ_LAST) {
- prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = sabre_onboard_imap_offset(ino);
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 36 * sizeof(u64),
+ .n = 36,
.size = sizeof(u64), .align = sizeof(u64),
.get = genregs64_get, .set = genregs64_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 35 * sizeof(u64),
+ .n = 35,
.size = sizeof(u64), .align = sizeof(u64),
.get = fpregs64_get, .set = fpregs64_set
},
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/linkage.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/smp.h>
/* This can get invoked before sched_init() so play it super safe
* and use hard_smp_processor_id().
*/
-void init_cur_cpu_trap(struct thread_info *t)
+void notrace init_cur_cpu_trap(struct thread_info *t)
{
int cpu = hard_smp_processor_id();
struct trap_per_cpu *p = &trap_block[cpu];
# P6_NOPs are a relatively minor optimization that require a family >=
# 6 processor, except that it is broken on certain VIA chips.
# Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs). As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs). In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
#
config X86_P6_NOP
def_bool y
- depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+ depends on X86_64
+ depends on (MCORE2 || MPENTIUM4 || MPSC)
config X86_TSC
def_bool y
/*
* The NOPL instruction is supposed to exist on all CPUs with
- * family >= 6, unfortunately, that's not true in practice because
+ * family >= 6; unfortunately, that's not true in practice because
* of early VIA chips and (more importantly) broken virtualizers that
- * are not easy to detect. Hence, probe for it based on first
- * principles.
+ * are not easy to detect. In the latter case it doesn't even *fail*
+ * reliably, so probing for it doesn't even work. Disable it completely
+ * unless we can find a reliable way to detect all the broken cases.
*/
static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
{
- const u32 nopl_signature = 0x888c53b1; /* Random number */
- u32 has_nopl = nopl_signature;
-
clear_cpu_cap(c, X86_FEATURE_NOPL);
- if (c->x86 >= 6) {
- asm volatile("\n"
- "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
- "2:\n"
- " .section .fixup,\"ax\"\n"
- "3: xor %0,%0\n"
- " jmp 2b\n"
- " .previous\n"
- _ASM_EXTABLE(1b,3b)
- : "+a" (has_nopl));
-
- if (has_nopl == nopl_signature)
- set_cpu_cap(c, X86_FEATURE_NOPL);
- }
}
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
if (!p)
return -EINVAL;
- if (!strcmp(p, "exactmap")) {
+ if (!strncmp(p, "exactmap", 8)) {
#ifdef CONFIG_CRASH_DUMP
/*
* If we are doing a crash dump, we still need to know
if (PageHighMem(pg)) {
data = ioremap_cache(pa_data, sizeof(*data));
if (!data) {
+ kfree(node);
error = -ENXIO;
goto err_dir;
}
parse_early_param();
+#ifdef CONFIG_X86_64
+ check_efer();
+#endif
+
#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
/*
* Must be before kernel pagetables are setup
#else
num_physpages = max_pfn;
- check_efer();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
u64 *spte;
int young = 0;
+ /* always return old for EPT */
+ if (!shadow_accessed_mask)
+ return 0;
+
spte = rmap_next(kvm, rmapp, NULL);
while (spte) {
int _young;
module_param(npt, int, S_IRUGO);
static void kvm_reput_irq(struct vcpu_svm *svm);
+static void svm_flush_tlb(struct kvm_vcpu *vcpu);
static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
{
static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
{
unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
+ unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
+
+ if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
+ force_new_asid(vcpu);
vcpu->arch.cr4 = cr4;
if (!npt_enabled)
KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
(u32)fault_address, (u32)(fault_address >> 32),
handler);
+ /*
+ * FIXME: Tis shouldn't be necessary here, but there is a flush
+ * missing in the MMU code. Until we find this bug, flush the
+ * complete TLB here on an NPF
+ */
+ if (npt_enabled)
+ svm_flush_tlb(&svm->vcpu);
if (event_injection)
kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
VMX_EPT_WRITABLE_MASK |
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
- kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
- VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+ kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
VMX_EPT_EXECUTABLE_MASK);
kvm_enable_tdp();
} else
#define VMX_EPT_READABLE_MASK 0x1ull
#define VMX_EPT_WRITABLE_MASK 0x2ull
#define VMX_EPT_EXECUTABLE_MASK 0x4ull
-#define VMX_EPT_FAKE_ACCESSED_MASK (1ull << 62)
-#define VMX_EPT_FAKE_DIRTY_MASK (1ull << 63)
#define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul
{
pgd_t *pgd_base = swapper_pg_dir;
- paravirt_pagetable_setup_start(pgd_base);
-
permanent_kmaps_init(pgd_base);
-
- paravirt_pagetable_setup_done(pgd_base);
}
#ifdef CONFIG_ACPI_SLEEP
e820.nr_map = 0;
- e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM);
+ e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM);
/*
* Even though this is normal, usable memory under Xen, reserve
}
EXPORT_SYMBOL(blk_verify_command);
+#if 0
/* and now, the sysfs stuff */
static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
int rw)
kobject_put(disk->holder_dir->parent);
}
EXPORT_SYMBOL(blk_unregister_filter);
+#endif
* off.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
- int rc = piix_disable_ahci(pdev);
+ rc = piix_disable_ahci(pdev);
if (rc)
return rc;
}
PORT_SCR = 0x20,
/* HOST_CTL bits */
+ HCTL_LEDEN = (1 << 3), /* enable LED operation */
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
void __iomem *port_base = inic_port_base(ap);
/* fire up the ADMA engine */
- writew(HCTL_FTHD0, port_base + HOST_CTL);
+ writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
writeb(0, port_base + PORT_CPB_PTQFIFO);
/* Number of monotonicity checks to perform during initialization */
#define ACPI_PM_MONOTONICITY_CHECKS 10
+/* Number of reads we try to get two different values */
+#define ACPI_PM_READ_CHECKS 10000
static int __init init_acpi_pm_clocksource(void)
{
cycle_t value1, value2;
- unsigned int i, j, good = 0;
+ unsigned int i, j = 0;
if (!pmtmr_ioport)
return -ENODEV;
/* "verify" this timing source: */
for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+ udelay(100 * j);
value1 = clocksource_acpi_pm.read();
- for (i = 0; i < 10000; i++) {
+ for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
value2 = clocksource_acpi_pm.read();
if (value2 == value1)
continue;
if (value2 > value1)
- good++;
break;
if ((value2 < value1) && ((value2) < 0xFFF))
- good++;
break;
printk(KERN_INFO "PM-Timer had inconsistent results:"
" 0x%#llx, 0x%#llx - aborting.\n",
value1, value2);
return -EINVAL;
}
- udelay(300 * i);
- }
-
- if (good != ACPI_PM_MONOTONICITY_CHECKS) {
- printk(KERN_INFO "PM-Timer failed consistency check "
- " (0x%#llx) - aborting.\n", value1);
- return -ENODEV;
+ if (i == ACPI_PM_READ_CHECKS) {
+ printk(KERN_INFO "PM-Timer failed consistency check "
+ " (0x%#llx) - aborting.\n", value1);
+ return -ENODEV;
+ }
}
if (verify_pmtmr_rate() != 0)
edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
memcpy(req->giv, ctx->iv, crypto_aead_ivsize(authenc));
+ /* avoid consecutive packets going out with same IV */
+ *(__be64 *)req->giv ^= cpu_to_be64(req->seq);
return ipsec_esp(edesc, areq, req->giv, req->seq,
ipsec_esp_encrypt_done);
priv->ofdev = ofdev;
+ INIT_LIST_HEAD(&priv->alg_list);
+
tasklet_init(&priv->done_task, talitos_done, (unsigned long)dev);
tasklet_init(&priv->error_task, talitos_error, (unsigned long)dev);
}
/* register crypto algorithms the device supports */
- INIT_LIST_HEAD(&priv->alg_list);
-
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
struct talitos_crypto_alg *t_alg;
return i2c_smbus_write_byte_data(client, reg, value);
}
-struct ad7414_data *ad7414_update_device(struct device *dev)
+static struct ad7414_data *ad7414_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct ad7414_data *data = i2c_get_clientdata(client);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
-MODULE_VERSION("0.6.2");
+MODULE_VERSION("0.6.3");
MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
#define ATXP1_VID 0x00
if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
- (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) {
+ (i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
+ return -ENODEV;
- /* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
- * showing the same as register 0x00 */
- temp = i2c_smbus_read_byte_data(new_client, 0x00);
+ /* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
+ * showing the same as register 0x00 */
+ temp = i2c_smbus_read_byte_data(new_client, 0x00);
- if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
- (i2c_smbus_read_byte_data(new_client, 0x11) == temp) ))
- return -ENODEV;
- }
+ if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
+ (i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
+ return -ENODEV;
/* Get VRM */
temp = vid_which_vrm();
static inline int has_16bit_fans(const struct it87_data *data)
{
/* IT8705F Datasheet 0.4.1, 3h == Version G.
- IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I.
+ IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
These are the first revisions with 16bit tachometer support. */
return (data->type == it87 && data->revision >= 0x03)
- || (data->type == it8712 && data->revision >= 0x07)
+ || (data->type == it8712 && data->revision >= 0x08)
|| data->type == it8716
|| data->type == it8718;
}
ide_proc_unregister_driver(drive, info->driver);
- blk_unregister_filter(info->disk);
del_gendisk(info->disk);
ide_cd_put(info);
g->fops = &idecd_ops;
g->flags |= GENHD_FL_REMOVABLE;
add_disk(g);
- blk_register_filter(g);
return 0;
out_free_cd:
return 0;
}
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+ struct ide_host *host = dev_get_drvdata(dev);
+ struct hpt_info *info = (struct hpt_info *)host->host_priv;
+
+ return dev == host->dev[1] ? info + 1 : info;
+}
+
/*
* The Marvell bridge chips used on the HighPoint SATA cards do not seem
* to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
switch (info->chip_type) {
case HPT372 :
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
if (drive->quirk_list) {
if (info->chip_type >= HPT370) {
static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
{
unsigned long io_base = pci_resource_start(dev, 4);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(&dev->dev);
const char *name = DRV_NAME;
u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
u8 chip_type;
static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 chip_type = info->chip_type;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
{
struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(wr->wr.fast_reg.page_list);
+ int i;
+
+ for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
+ wr->wr.fast_reg.page_list->page_list[i] =
+ cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
+ MLX4_MTT_FLAG_PRESENT);
fseg->flags = convert_access(wr->wr.fast_reg.access_flags);
fseg->mem_key = cpu_to_be32(wr->wr.fast_reg.rkey);
return ret;
cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
- ret = send_fin(cm_node, NULL);
-
- if (cm_node->accept_pend) {
- BUG_ON(!cm_node->listener);
- atomic_dec(&cm_node->listener->pend_accepts_cnt);
- BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
- }
ret = send_reset(cm_node, NULL);
return ret;
atomic_inc(&cm_disconnects);
cm_event.event = IW_CM_EVENT_DISCONNECT;
if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
+ issued_disconnect_reset = 1;
cm_event.status = IW_CM_EVENT_STATUS_RESET;
nes_debug(NES_DBG_CM, "Generating a CM "
"Disconnect Event (status reset) for "
nes_debug(NES_DBG_CM, "Call close API\n");
g_cm_core->api->close(g_cm_core, nesqp->cm_node);
- nesqp->cm_node = NULL;
}
return ret;
cm_node->apbvt_set = 1;
nesqp->cm_node = cm_node;
cm_node->nesqp = nesqp;
+ nes_add_ref(&nesqp->ibqp);
return 0;
}
if (ret)
printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
"ret=%d\n", __func__, __LINE__, ret);
- nes_rem_ref(&nesqp->ibqp);
cm_id->rem_ref(cm_id);
rem_ref_cm_node(event->cm_node->cm_core, event->cm_node);
struct delayed_work pkey_poll_task;
struct delayed_work mcast_task;
+ struct work_struct carrier_on_task;
struct work_struct flush_light;
struct work_struct flush_normal;
struct work_struct flush_heavy;
void ipoib_dev_cleanup(struct net_device *dev);
void ipoib_mcast_join_task(struct work_struct *work);
+void ipoib_mcast_carrier_on_task(struct work_struct *work);
void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb);
void ipoib_mcast_restart_task(struct work_struct *work);
INIT_DELAYED_WORK(&priv->pkey_poll_task, ipoib_pkey_poll);
INIT_DELAYED_WORK(&priv->mcast_task, ipoib_mcast_join_task);
+ INIT_WORK(&priv->carrier_on_task, ipoib_mcast_carrier_on_task);
INIT_WORK(&priv->flush_light, ipoib_ib_dev_flush_light);
INIT_WORK(&priv->flush_normal, ipoib_ib_dev_flush_normal);
INIT_WORK(&priv->flush_heavy, ipoib_ib_dev_flush_heavy);
return ret;
}
+void ipoib_mcast_carrier_on_task(struct work_struct *work)
+{
+ struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
+ carrier_on_task);
+
+ /*
+ * Take rtnl_lock to avoid racing with ipoib_stop() and
+ * turning the carrier back on while a device is being
+ * removed.
+ */
+ rtnl_lock();
+ netif_carrier_on(priv->dev);
+ rtnl_unlock();
+}
+
static int ipoib_mcast_join_complete(int status,
struct ib_sa_multicast *multicast)
{
&priv->mcast_task, 0);
mutex_unlock(&mcast_mutex);
- if (mcast == priv->broadcast) {
- /*
- * Take RTNL lock here to avoid racing with
- * ipoib_stop() and turning the carrier back
- * on while a device is being removed.
- */
- rtnl_lock();
- netif_carrier_on(dev);
- rtnl_unlock();
- }
+ /*
+ * Defer carrier on work to ipoib_workqueue to avoid a
+ * deadlock on rtnl_lock here.
+ */
+ if (mcast == priv->broadcast)
+ queue_work(ipoib_workqueue, &priv->carrier_on_task);
return 0;
}
* time 'round when curr_resync == 2
*/
continue;
- prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE);
+ /* We need to wait 'interruptible' so as not to
+ * contribute to the load average, and not to
+ * be caught by 'softlockup'
+ */
+ prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
if (!kthread_should_stop() &&
mddev2->curr_resync >= mddev->curr_resync) {
printk(KERN_INFO "md: delaying %s of %s"
" share one or more physical units)\n",
desc, mdname(mddev), mdname(mddev2));
mddev_put(mddev2);
+ if (signal_pending(current))
+ flush_signals(current);
schedule();
finish_wait(&resync_wait, &wq);
goto try_again;
config VIDEO_SH_MOBILE_CEU
tristate "SuperH Mobile CEU Interface driver"
- depends on VIDEO_DEV
+ depends on VIDEO_DEV && HAS_DMA
select SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
---help---
}
static struct class memstick_host_class = {
- .name = "memstick_host",
+ .name = "memstick_host",
.dev_release = memstick_free
};
* @sg - TPC argument
*/
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg)
+ const struct scatterlist *sg)
{
mrq->tpc = tpc;
if (tpc & 8)
* user supplied buffer.
*/
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length)
+ const void *buf, size_t length)
{
mrq->tpc = tpc;
if (tpc & 8)
if (!host->card) {
if (memstick_power_on(host))
goto out_power_off;
- } else
+ } else if (host->card->stop)
host->card->stop(host->card);
card = memstick_alloc_card(host);
|| !(host->card->check(host->card))) {
device_unregister(&host->card->dev);
host->card = NULL;
- } else
+ } else if (host->card->start)
host->card->start(host->card);
}
#define MSPRO_BLOCK_SIGNATURE 0xa5c3
#define MSPRO_BLOCK_MAX_ATTRIBUTES 41
+#define MSPRO_BLOCK_PART_SHIFT 3
+
enum {
MSPRO_BLOCK_ID_SYSINFO = 0x10,
MSPRO_BLOCK_ID_MODELNAME = 0x15,
static int mspro_block_disk_release(struct gendisk *disk)
{
struct mspro_block_data *msb = disk->private_data;
- int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT;
+ int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT;
mutex_lock(&mspro_block_disk_lock);
struct mspro_block_data *msb = memstick_get_drvdata(card);
int rc = 0;
+try_again:
if (msb->caps & MEMSTICK_CAP_PAR4)
rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
else
rc = memstick_set_rw_addr(card);
if (!rc)
rc = mspro_block_set_interface(card, msb->system);
+
+ if (!rc) {
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
+ if (rc)
+ return rc;
+
+ if (msb->caps & MEMSTICK_CAP_PAR8) {
+ msb->caps &= ~MEMSTICK_CAP_PAR8;
+ goto try_again;
+ }
+ }
}
return rc;
}
return -EIO;
msb->caps = host->caps;
- rc = mspro_block_switch_interface(card);
+
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
if (rc)
return rc;
- msleep(200);
- rc = mspro_block_wait_for_ced(card);
+ rc = mspro_block_switch_interface(card);
if (rc)
return rc;
+
dev_dbg(&card->dev, "card activated\n");
if (msb->system != MEMSTICK_SYS_SERIAL)
msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
if (rc)
return rc;
- if ((disk_id << MEMSTICK_PART_SHIFT) > 255) {
+ if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) {
rc = -ENOSPC;
goto out_release_id;
}
- msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT);
+ msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT);
if (!msb->disk) {
rc = -ENOMEM;
goto out_release_id;
MSPRO_BLOCK_MAX_PAGES * msb->page_size);
msb->disk->major = major;
- msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT;
+ msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT;
msb->disk->fops = &ms_block_bdops;
msb->usage_count = 1;
msb->disk->private_data = msb;
static struct memstick_device_id mspro_block_id_tbl[] = {
{MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO,
- MEMSTICK_CLASS_GENERIC_DUO},
+ MEMSTICK_CLASS_DUO},
{}
};
#define TPC_CODE_SZ_MASK 0x00000700
#define TPC_DATA_SZ_MASK 0x00000007
+#define HOST_CONTROL_TDELAY_EN 0x00040000
+#define HOST_CONTROL_HW_OC_P 0x00010000
#define HOST_CONTROL_RESET_REQ 0x00008000
#define HOST_CONTROL_REI 0x00004000
#define HOST_CONTROL_LED 0x00000400
#define HOST_CONTROL_RESET 0x00000100
#define HOST_CONTROL_POWER_EN 0x00000080
#define HOST_CONTROL_CLOCK_EN 0x00000040
+#define HOST_CONTROL_REO 0x00000008
#define HOST_CONTROL_IF_SHIFT 4
#define HOST_CONTROL_IF_SERIAL 0x0
#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
#define CLOCK_CONTROL_40MHZ 0x00000001
-#define CLOCK_CONTROL_50MHZ 0x00000002
+#define CLOCK_CONTROL_50MHZ 0x0000000a
#define CLOCK_CONTROL_60MHZ 0x00000008
#define CLOCK_CONTROL_62_5MHZ 0x0000000c
#define CLOCK_CONTROL_OFF 0x00000000
+#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0
+#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
+#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
+
enum {
CMD_READY = 0x01,
FIFO_READY = 0x02,
return host->req->error;
}
- dev_dbg(&msh->dev, "control %08x\n",
- readl(host->addr + HOST_CONTROL));
+ dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL));
dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS));
dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS));
ndelay(20);
}
dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
- return -EIO;
+ /* return -EIO; */
reset_next:
writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN;
+ | HOST_CONTROL_CLOCK_EN
+ | HOST_CONTROL_HW_OC_P
+ | HOST_CONTROL_TDELAY_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
break;
case MEMSTICK_INTERFACE:
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+ pci_read_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ &clock_delay);
+ clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
+ : ~PCI_CTL_CLOCK_DLY_MASK_A;
if (value == MEMSTICK_SERIAL) {
host_ctl &= ~HOST_CONTROL_FAST_CLK;
+ host_ctl &= ~HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_SERIAL
<< HOST_CONTROL_IF_SHIFT;
host_ctl |= HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 0;
} else if (value == MEMSTICK_PAR4) {
- host_ctl |= HOST_CONTROL_FAST_CLK;
+ host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_PAR4
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 4;
+ clock_delay |= host->id ? (4 << 12) : (4 << 8);
} else if (value == MEMSTICK_PAR8) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR8
<< HOST_CONTROL_IF_SHIFT;
- host_ctl &= ~HOST_CONTROL_REI;
- clock_ctl = CLOCK_CONTROL_60MHZ;
- clock_delay = 0;
+ host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
+ clock_ctl = CLOCK_CONTROL_50MHZ;
} else
return -EINVAL;
+
writel(host_ctl, host->addr + HOST_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
- writel(clock_delay, host->addr + CLOCK_DELAY);
+ pci_write_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ clock_delay);
break;
};
return 0;
int order = get_order(sizeof(struct gru_state) *
GRU_CHIPLETS_PER_BLADE);
+ if (!IS_UV())
+ return;
+
for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
free_irq(IRQ_GRU + i, NULL);
static int __init mmc_blk_init(void)
{
- int res = -ENOMEM;
+ int res;
res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
if (res)
goto out;
- return mmc_register_driver(&mmc_driver);
+ res = mmc_register_driver(&mmc_driver);
+ if (res)
+ goto out2;
+ return 0;
+ out2:
+ unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
out:
return res;
}
};
-static struct mutex mmc_test_lock;
+static DEFINE_MUTEX(mmc_test_lock);
static void mmc_test_run(struct mmc_test_card *test, int testcase)
{
if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD))
return -ENODEV;
- mutex_init(&mmc_test_lock);
-
ret = device_create_file(&card->dev, &dev_attr_test);
if (ret)
return ret;
/* Grab a more or less consistent snapshot */
spin_lock_irq(&host->mmc->lock);
+ clk_enable(host->mck);
memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+ clk_disable(host->mck);
spin_unlock_irq(&host->mmc->lock);
seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
+ kfree(buf);
+
return 0;
}
struct mmc_host *mmc;
struct dentry *root;
struct dentry *node;
- struct resource *res;
mmc = host->mmc;
root = mmc->debugfs_root;
if (!node)
goto err;
- res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
- node->d_inode->i_size = res->end - res->start + 1;
-
node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
if (!node)
goto err;
host->present = !gpio_get_value(host->detect_pin);
}
}
+
+ if (!gpio_is_valid(host->detect_pin))
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
if (gpio_is_valid(host->wp_pin)) {
if (gpio_request(host->wp_pin, "mmc_wp")) {
dev_dbg(&mmc->class_dev, "no WP pin available\n");
#define STATUS_TO_TEXT(a) \
do { \
if (status & TMIO_STAT_##a) \
- printf(#a); \
+ printk(#a); \
} while (0)
-void debug_status(u32 status)
+void pr_debug_status(u32 status)
{
printk(KERN_DEBUG "status: %08x = ", status);
STATUS_TO_TEXT(CARD_REMOVE);
#ifndef MODULE
struct net_device * __init hp_plus_probe(int unit)
{
- struct net_device *dev = alloc_ei_netdev();
+ struct net_device *dev = alloc_eip_netdev();
int err;
if (!dev)
int option_reg;
int retval;
- if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) {
+ if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
return retval;
}
/* Select the operational page. */
outw(Perf_Page, ioaddr + HP_PAGING);
- ei_open(dev);
+ eip_open(dev);
return 0;
}
int option_reg = inw(ioaddr + HPP_OPTION);
free_irq(dev->irq, dev);
- ei_close(dev);
+ eip_close(dev);
outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
ioaddr + HPP_OPTION);
#define MLX4_MPT_FLAG_PHYSICAL (1 << 9)
#define MLX4_MPT_FLAG_REGION (1 << 8)
-#define MLX4_MPT_PD_FLAG_FAST_REG (1 << 26)
+#define MLX4_MPT_PD_FLAG_FAST_REG (1 << 27)
+#define MLX4_MPT_PD_FLAG_RAE (1 << 28)
#define MLX4_MPT_PD_FLAG_EN_INV (3 << 24)
-#define MLX4_MTT_FLAG_PRESENT 1
-
#define MLX4_MPT_STATUS_SW 0xF0
#define MLX4_MPT_STATUS_HW 0x00
if (mr->mtt.order >= 0 && mr->mtt.page_shift == 0) {
/* fast register MR in free state */
mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_FREE);
- mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG);
+ mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG |
+ MLX4_MPT_PD_FLAG_RAE);
+ mpt_entry->mtt_sz = cpu_to_be32((1 << mr->mtt.order) *
+ MLX4_MTT_ENTRY_PER_SEG);
} else {
mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS);
}
return 0;
}
-/* Update the rfkill state */
-static void b43_rfkill_update_state(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
{
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43_rfkill_update_state(dev);
b43info(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
return 0;
}
-/* Update the rfkill state */
-static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev)
-{
- struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
{
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43legacy_rfkill_update_state(dev);
b43legacyinfo(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
return -ENODEV;
}
+ /* remove the device from the pci core */
+ pci_remove_bus_device(dev);
+
/* queue work item to blow away this sysfs entry and other
* parts.
*/
INIT_WORK(&dslot->remove_work, remove_slot_worker);
queue_work(dummyphp_wq, &dslot->remove_work);
- /* blow away this sysfs entry and other parts. */
- remove_slot(dslot);
-
pci_dev_put(dev);
}
return 0;
return 1;
}
}
- while (timeout > 1000) {
+ while (timeout > 0) {
msleep(10);
timeout -= 10;
if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
}
+static int blacklist_iommu(const struct dmi_system_id *id)
+{
+ printk(KERN_INFO "%s detected; disabling IOMMU\n",
+ id->ident);
+ dmar_disabled = 1;
+ return 0;
+}
+
+static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
+ { /* Some DG33BU BIOS revisions advertised non-existent VT-d */
+ .callback = blacklist_iommu,
+ .ident = "Intel DG33BU",
+ { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
+ }
+ },
+ { }
+};
+
+
void __init detect_intel_iommu(void)
{
if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
return;
if (early_dmar_detect()) {
+ dmi_check_system(intel_iommu_dmi_table);
+ if (dmar_disabled)
+ return;
iommu_detected = 1;
}
}
} else {
res->start = l64;
res->end = l64 + sz64;
+ printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+ pci_name(dev), pos, (unsigned long long)res->start,
+ (unsigned long long)res->end);
}
} else {
sz = pci_size(l, sz, mask);
res->start = l;
res->end = l + sz;
+ printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+ pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
+ (unsigned long long)res->start, (unsigned long long)res->end);
}
out:
res->start = base;
if (!res->end)
res->end = limit + 0xfff;
- printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
+ pci_name(dev), (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
res = child->resource[1];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
- printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+ pci_name(dev), (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
res = child->resource[2];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
res->start = base;
res->end = limit + 0xfffff;
- printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+ pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+ (unsigned long long) res->start, (unsigned long long) res->end);
}
}
if (!res)
continue;
- printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+ printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n",
+ bus->number, i,
+ (res->flags & IORESOURCE_IO) ? "io port" : "mmio",
+ (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
}
add_timer(&skt->poll_timer);
- device_create_file(&skt->socket.dev, &dev_attr_status);
+ ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+ if (ret)
+ goto out_err_8;
}
dev_set_drvdata(dev, sinfo);
do {
skt = &sinfo->skt[i];
+ device_remove_file(&skt->socket.dev, &dev_attr_status);
+ out_err_8:
del_timer_sync(&skt->poll_timer);
pcmcia_unregister_socket(&skt->socket);
for (i = 0; i < gdev->count; i++) {
if (gdev->cdev[i]) {
- dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+ if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
+ dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
put_device(&gdev->cdev[i]->dev);
}
}
if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
put_device(&gdev->cdev[i]->dev);
+ gdev->cdev[i] = NULL;
}
mutex_unlock(&gdev->reg_mutex);
put_device(&gdev->dev);
ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
if (ret) {
device_unregister(&chp->dev);
- goto out_free;
+ goto out;
}
mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
if (channel_subsystems[chpid.cssid]->cm_enabled) {
sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
device_unregister(&chp->dev);
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- goto out_free;
+ goto out;
}
}
channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- return ret;
+ goto out;
out_free:
kfree(chp);
+out:
return ret;
}
CIO_TRACE_EVENT(4, sch->dev.bus_id);
orb = &to_io_private(sch)->orb;
+ memset(orb, 0, sizeof(union orb));
/* sch is always under 2G. */
orb->cmd.intparm = (u32)(addr_t)sch;
orb->cmd.fmt = 1;
case 1: /* status pending */
case 2: /* busy */
return -EBUSY;
- default: /* device/path not operational */
+ case 3: /* device/path not operational */
return cio_start_handle_notoper(sch, lpm);
+ default:
+ return ccode;
}
}
css = to_css(dev);
mutex_destroy(&css->mutex);
+ if (css->pseudo_subchannel) {
+ /* Implies that it has been generated but never registered. */
+ css_subchannel_release(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
+ }
kfree(css);
}
}
channel_subsystems[i] = css;
ret = setup_css(i);
- if (ret)
- goto out_free;
+ if (ret) {
+ kfree(channel_subsystems[i]);
+ goto out_unregister;
+ }
ret = device_register(&css->device);
- if (ret)
- goto out_free_all;
+ if (ret) {
+ put_device(&css->device);
+ goto out_unregister;
+ }
if (css_chsc_characteristics.secm) {
ret = device_create_file(&css->device,
&dev_attr_cm_enable);
}
ret = register_reboot_notifier(&css_reboot_notifier);
if (ret)
- goto out_pseudo;
+ goto out_unregister;
css_init_done = 1;
/* Enable default isc for I/O subchannels. */
for_each_subchannel(__init_channel_subsystem, NULL);
return 0;
-out_pseudo:
- device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
out_file:
- device_remove_file(&channel_subsystems[i]->device,
- &dev_attr_cm_enable);
+ if (css_chsc_characteristics.secm)
+ device_remove_file(&channel_subsystems[i]->device,
+ &dev_attr_cm_enable);
out_device:
device_unregister(&channel_subsystems[i]->device);
-out_free_all:
- kfree(channel_subsystems[i]->pseudo_subchannel->lock);
- kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
- kfree(channel_subsystems[i]);
out_unregister:
while (i > 0) {
struct channel_subsystem *css;
i--;
css = channel_subsystems[i];
device_unregister(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
if (css_chsc_characteristics.secm)
device_remove_file(&css->device,
&dev_attr_cm_enable);
{
struct subchannel *sch;
+ /* Allow ccw_device_offline while disconnected. */
+ if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+ cdev->private->state == DEV_STATE_NOT_OPER) {
+ cdev->private->flags.donotify = 0;
+ ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+ return 0;
+ }
if (ccw_device_is_orphan(cdev)) {
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
*/
static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
{
- struct zfcp_adapter *adapter;
+ struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
- down(&zfcp_data.config_sema);
- adapter = dev_get_drvdata(&ccw_device->dev);
switch (event) {
case CIO_GONE:
dev_warn(&adapter->ccw_device->dev, "device gone\n");
89, NULL);
break;
}
- zfcp_erp_wait(adapter);
- up(&zfcp_data.config_sema);
return 1;
}
struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
};
-static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter,
- u32 d_id)
-{
- struct zfcp_port *port;
-
- list_for_each_entry(port, &adapter->port_list_head, list)
- if ((port->d_id == d_id) &&
- !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status))
- return port;
- return NULL;
-}
-
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
struct fcp_rscn_element *elem)
{
zfcp_port_get(port);
retval = zfcp_fc_adisc(port);
- if (retval == 0 || retval == -EBUSY)
+ if (retval == 0)
return;
/* send of ADISC was not possible */
zfcp_port_put(port);
- zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
+ if (retval != -EBUSY)
+ zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
}
static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
if (ret)
return ret;
zfcp_erp_wait(adapter);
- zfcp_port_put(adapter->nameserver_port);
}
return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED,
&adapter->nameserver_port->status);
struct zfcp_adapter *adapter = ct->port->adapter;
struct zfcp_port *port, *tmp;
u32 d_id;
- int ret = 0, x;
+ int ret = 0, x, last = 0;
if (ct->status)
return -EIO;
down(&zfcp_data.config_sema);
/* first entry is the header */
- for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) {
+ for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) {
if (x % (ZFCP_GPN_FT_ENTRIES + 1))
acc++;
else
acc = sg_virt(++sg);
+ last = acc->control & 0x80;
d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
acc->port_id[2];
/* skip the adapter's port and known remote ports */
- if (acc->wwpn == fc_host_port_name(adapter->scsi_host) ||
- zfcp_get_port_by_did(adapter, d_id))
+ if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
+ continue;
+ port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
+ if (port) {
+ zfcp_port_get(port);
continue;
+ }
port = zfcp_port_enqueue(adapter, acc->wwpn,
ZFCP_STATUS_PORT_DID_DID |
ret = PTR_ERR(port);
else
zfcp_erp_port_reopen(port, 0, 149, NULL);
- if (acc->control & 0x80) /* last entry */
- break;
}
zfcp_erp_wait(adapter);
static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue)
{
- spin_lock(&queue->lock);
+ spin_lock_bh(&queue->lock);
if (atomic_read(&queue->count))
return 1;
- spin_unlock(&queue->lock);
+ spin_unlock_bh(&queue->lock);
return 0;
}
long ret;
struct zfcp_qdio_queue *req_q = &adapter->req_q;
- spin_unlock(&req_q->lock);
+ spin_unlock_bh(&req_q->lock);
ret = wait_event_interruptible_timeout(adapter->request_wq,
zfcp_fsf_sbal_check(req_q), 5 * HZ);
if (ret > 0)
return 0;
- spin_lock(&req_q->lock);
+ spin_lock_bh(&req_q->lock);
return -EIO;
}
volatile struct qdio_buffer_element *sbale;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS,
ZFCP_REQ_NO_QTCB,
adapter->pool.fsf_req_status_read);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_req_free(req);
zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
req_flags, adapter->pool.fsf_req_abort);
- if (unlikely(IS_ERR(req)))
+ if (IS_ERR(req))
goto out;
if (unlikely(!(atomic_read(&unit->status) &
struct zfcp_fsf_req *req;
int ret = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC,
ZFCP_REQ_AUTO_CLEANUP, pool);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
if (erp_action)
erp_action->fsf_req = NULL;
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return ret;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS,
ZFCP_REQ_AUTO_CLEANUP, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
struct zfcp_adapter *adapter = erp_action->adapter;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter,
FSF_QTCB_EXCHANGE_CONFIG_DATA,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req = NULL;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
0, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
return -EOPNOTSUPP;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
return -EOPNOTSUPP;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
FSF_QTCB_OPEN_PORT_WITH_DID,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (unlikely(IS_ERR(req)))
+ if (IS_ERR(req))
goto out;
req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
return ERR_PTR(-EINVAL);
}
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = -EPERM;
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval) {
wait_event(req->completion_wq,
/* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
req_q = &adapter->req_q;
- spin_lock(&req_q->lock);
+ spin_lock_bh(&req_q->lock);
atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
- spin_unlock(&req_q->lock);
+ spin_unlock_bh(&req_q->lock);
qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
- select CRC_T10DIF
+ select CRC_T10DIF if BLK_DEV_INTEGRITY
---help---
If you want to use SCSI hard disks, Fibre Channel disks,
Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
/*
* LUN Not Accessible - ALUA state transition
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
/*
* LUN Not Accessible -- Target port in standby state
/*
* Power On, Reset, or Bus Device Reset, just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
/*
* ALUA state changed
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
}
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
/*
* Implicit ALUA state transition failed
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
}
break;
}
if (!err)
return SCSI_DH_IO;
err = alua_check_sense(sdev, &sense_hdr);
- if (retry > 0 && err == NEEDS_RETRY) {
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
return SCSI_DH_IO;
err = alua_check_sense(sdev, &sense_hdr);
- if (err == NEEDS_RETRY)
+ if (err == ADD_TO_MLQUEUE)
goto retry;
sdev_printk(KERN_INFO, sdev,
"%s: rtpg sense code %02x/%02x/%02x\n",
* Unit Attention Code. This is the first IO
* to the new path, so just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
return SCSI_DH_IO;
err = clariion_check_sense(sdev, &sshdr);
- if (retry > 0 && err == NEEDS_RETRY) {
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
*
* Just retry and wait.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
case ILLEGAL_REQUEST:
if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
/*
* Power On, Reset, or Bus Device Reset, just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
/* success just means we do not care what scsi-ml does */
case HARDWARE_ERROR:
if (scmd->device->retry_hwerror)
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
else
return SUCCESS;
* PDT=1Fh none (no FDD connected to the requested logical unit)
*/
if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
- (result[0] & 0x1f) == 0x1f) {
+ (result[0] & 0x1f) == 0x1f &&
+ !scsi_is_wlun(lun)) {
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
"scsi scan: peripheral device type"
" of 31, no device added\n"));
dev_set_drvdata(dev, sdkp);
add_disk(gd);
- blk_register_filter(gd);
sd_dif_config_host(sdkp);
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
struct scsi_disk *sdkp = dev_get_drvdata(dev);
device_del(&sdkp->dev);
- blk_unregister_filter(sdkp->disk);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
dev_set_drvdata(dev, cd);
disk->flags |= GENHD_FL_REMOVABLE;
add_disk(disk);
- blk_register_filter(disk);
sdev_printk(KERN_DEBUG, sdev,
"Attached scsi CD-ROM %s\n", cd->cdi.name);
{
struct scsi_cd *cd = dev_get_drvdata(dev);
- blk_unregister_filter(cd->disk);
del_gendisk(cd->disk);
mutex_lock(&sr_ref_mutex);
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
imx_txint(irq, dev_id);
- if (sts & USR1_RTSS)
+ if (sts & USR1_RTSD)
imx_rtsint(irq, dev_id);
return IRQ_HANDLED;
temp |= (UCR2_RXEN | UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+ temp = readl(sport->port.membase + UCR3);
+ temp |= UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+#endif
+
/*
* Enable modem status interrupts
*/
if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
sport->have_rtscts = 1;
- if (pdata->init)
- pdata->init(pdev);
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret)
+ goto clkput;
+ }
uart_add_one_port(&imx_reg, &sport->port);
platform_set_drvdata(pdev, &sport->port);
return 0;
+clkput:
+ clk_put(sport->clk);
+ clk_disable(sport->clk);
unmap:
iounmap(sport->port.membase);
free:
#define MAX_BUSES 3
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((x) & 0x07) == 0)
+#define MAX_DMA_LEN 8191
/*
* for testing SSCR1 changes that require SSP restart, basically
size_t tx_map_len;
u8 n_bytes;
u32 dma_width;
- int cs_change;
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
struct spi_transfer,
transfer_list);
+ /* Delay if requested before any change in chip select */
+ if (last_transfer->delay_usecs)
+ udelay(last_transfer->delay_usecs);
+
+ /* Drop chip select UNLESS cs_change is true or we are returning
+ * a message with an error, or next message is for another chip
+ */
if (!last_transfer->cs_change)
drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ else {
+ struct spi_message *next_msg;
+
+ /* Holding of cs was hinted, but we need to make sure
+ * the next message is for the same chip. Don't waste
+ * time with the following tests unless this was hinted.
+ *
+ * We cannot postpone this until pump_messages, because
+ * after calling msg->complete (below) the driver that
+ * sent the current message could be unloaded, which
+ * could invalidate the cs_control() callback...
+ */
+
+ /* get a pointer to the next message, if any */
+ spin_lock_irqsave(&drv_data->lock, flags);
+ if (list_empty(&drv_data->queue))
+ next_msg = NULL;
+ else
+ next_msg = list_entry(drv_data->queue.next,
+ struct spi_message, queue);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ /* see if the next and current messages point
+ * to the same chip
+ */
+ if (next_msg && next_msg->spi != msg->spi)
+ next_msg = NULL;
+ if (!next_msg || msg->state == ERROR_STATE)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ }
msg->state = NULL;
if (msg->complete)
msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
msg->state = next_transfer(drv_data);
drv_data->cur_msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
drv_data->cur_msg->state = next_transfer(drv_data);
return;
}
- /* Delay if requested at end of transfer*/
+ /* Delay if requested at end of transfer before CS change */
if (message->state == RUNNING_STATE) {
previous = list_entry(transfer->transfer_list.prev,
struct spi_transfer,
transfer_list);
if (previous->delay_usecs)
udelay(previous->delay_usecs);
+
+ /* Drop chip select only if cs_change is requested */
+ if (previous->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
}
- /* Check transfer length */
- if (transfer->len > 8191)
- {
- dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
- "length greater than 8191\n");
- message->status = -EINVAL;
- giveback(drv_data);
- return;
+ /* Check for transfers that need multiple DMA segments */
+ if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+
+ /* reject already-mapped transfers; PIO won't always work */
+ if (message->is_dma_mapped
+ || transfer->rx_dma || transfer->tx_dma) {
+ dev_err(&drv_data->pdev->dev,
+ "pump_transfers: mapped transfer length "
+ "of %lu is greater than %d\n",
+ transfer->len, MAX_DMA_LEN);
+ message->status = -EINVAL;
+ giveback(drv_data);
+ return;
+ }
+
+ /* warn ... we force this to PIO mode */
+ if (printk_ratelimit())
+ dev_warn(&message->spi->dev, "pump_transfers: "
+ "DMA disabled for transfer length %ld "
+ "greater than %d\n",
+ (long)drv_data->len, MAX_DMA_LEN);
}
/* Setup the transfer state based on the type of transfer */
drv_data->len = transfer->len & DCMD_LENGTH;
drv_data->write = drv_data->tx ? chip->write : null_writer;
drv_data->read = drv_data->rx ? chip->read : null_reader;
- drv_data->cs_change = transfer->cs_change;
/* Change speed and bit per word on a per transfer */
cr0 = chip->cr0;
&dma_thresh))
if (printk_ratelimit())
dev_warn(&message->spi->dev,
- "pump_transfer: "
+ "pump_transfers: "
"DMA burst size reduced to "
"match bits_per_word\n");
}
message->state = RUNNING_STATE;
- /* Try to map dma buffer and do a dma transfer if successful */
- if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+ /* Try to map dma buffer and do a dma transfer if successful, but
+ * only if the length is non-zero and less than MAX_DMA_LEN.
+ *
+ * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+ * of PIO instead. Care is needed above because the transfer may
+ * have have been passed with buffers that are already dma mapped.
+ * A zero-length transfer in PIO mode will not try to write/read
+ * to/from the buffers
+ *
+ * REVISIT large transfers are exactly where we most want to be
+ * using DMA. If this happens much, split those transfers into
+ * multiple DMA segments rather than forcing PIO.
+ */
+ drv_data->dma_mapped = 0;
+ if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
+ drv_data->dma_mapped = map_dma_buffers(drv_data);
+ if (drv_data->dma_mapped) {
/* Ensure we have the correct interrupt handler */
drv_data->transfer_handler = dma_transfer;
cs->hw_mode |= SPMODE_LEN(bits_per_word);
if ((mpc83xx_spi->spibrg / hz) > 64) {
+ cs->hw_mode |= SPMODE_DIV16;
pm = mpc83xx_spi->spibrg / (hz * 64);
if (pm > 16) {
- cs->hw_mode |= SPMODE_DIV16;
- pm /= 16;
- if (pm > 16) {
- dev_err(&spi->dev, "Requested speed is too "
- "low: %d Hz. Will use %d Hz instead.\n",
- hz, mpc83xx_spi->spibrg / 1024);
- pm = 16;
- }
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+ pm = 16;
}
} else
pm = mpc83xx_spi->spibrg / (hz * 4);
if (t->bits_per_word)
bits_per_word = t->bits_per_word;
len = t->len;
- if (bits_per_word > 8)
+ if (bits_per_word > 8) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
- if (bits_per_word > 16)
+ }
+ if (bits_per_word > 16) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
+ }
mpc83xx_spi->count = len;
+
INIT_COMPLETION(mpc83xx_spi->done);
/* enable rx ints */
#endif
MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
.remove = __exit_p(s3c24xx_spi_remove),
.suspend = s3c24xx_spi_suspend,
.resume = s3c24xx_spi_resume,
static int __init s3c24xx_spi_init(void)
{
- return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+ return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
}
static void __exit s3c24xx_spi_exit(void)
{
- platform_driver_unregister(&s3c24xx_spidrv);
+ platform_driver_unregister(&s3c24xx_spi_driver);
}
module_init(s3c24xx_spi_init);
return value;
}
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+ /* Turn off the LCD controller and the DMA controller */
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+ /* Wait for the LCDC core to become idle */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ msleep(10);
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+ atmel_lcdfb_stop_nowait(sinfo);
+
+ /* Wait for DMA engine to become idle... */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+ | ATMEL_LCDC_PWR);
+}
+
static void atmel_lcdfb_update_dma(struct fb_info *info,
struct fb_var_screeninfo *var)
{
{
might_sleep();
- /* LCD power off */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- /* DMA disable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
- /* wait for DMA engine to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- msleep(10);
-
- /* LCD power on */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-
- /* DMA enable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ atmel_lcdfb_stop(sinfo);
+ atmel_lcdfb_start(sinfo);
}
/**
info->var.xres, info->var.yres,
info->var.xres_virtual, info->var.yres_virtual);
- /* Turn off the LCD controller and the DMA controller */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* Wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+ atmel_lcdfb_stop_nowait(sinfo);
if (info->var.bits_per_pixel == 1)
info->fix.visual = FB_VISUAL_MONO01;
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
msleep(10);
- dev_dbg(info->device, " * re-enable DMA engine\n");
- /* ...and enable it with updated configuration */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-
- dev_dbg(info->device, " * re-enable LCDC core\n");
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+ atmel_lcdfb_start(sinfo);
dev_dbg(info->device, " * DONE\n");
struct fb_info *info = platform_get_drvdata(pdev);
struct atmel_lcdfb_info *sinfo = info->par;
+ /*
+ * We don't want to handle interrupts while the clock is
+ * stopped. It may take forever.
+ */
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
+
+ atmel_lcdfb_stop(sinfo);
atmel_lcdfb_stop_clock(sinfo);
+
return 0;
}
struct atmel_lcdfb_info *sinfo = info->par;
atmel_lcdfb_start_clock(sinfo);
+ atmel_lcdfb_start(sinfo);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+ /* Enable FIFO & DMA errors */
+ lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+ | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
return 0;
}
#define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
struct balloon_stats {
/* We aim for 'current allocation' == 'target allocation'. */
inode->i_ino);
if (err) {
inode_dec_link_count(inode);
- iput(inode);
mutex_unlock(&info->bfs_lock);
+ iput(inode);
return err;
}
mutex_unlock(&info->bfs_lock);
goto bail;
}
- if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) {
+ if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) {
ocfs2_error(inode->i_sb,
"Inode %llu has a hole at block %llu\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno,
if (!size)
continue;
if (from + size > get_capacity(disk)) {
- printk(KERN_ERR " %s: p%d exceeds device capacity\n",
+ printk(KERN_WARNING
+ "%s: p%d exceeds device capacity\n",
disk->disk_name, p);
- continue;
}
res = add_partition(disk, p, from, size, state->parts[p].flags);
if (res) {
for (tmp = dir->subdir; tmp; tmp = tmp->next)
if (strcmp(tmp->name, dp->name) == 0) {
- printk(KERN_WARNING "proc_dir_entry '%s' already "
- "registered\n", dp->name);
+ printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+ dir->name, dp->name);
dump_stack();
break;
}
"SReclaimable: %8lu kB\n"
"SUnreclaim: %8lu kB\n"
"PageTables: %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+ "Quicklists: %8lu kB\n"
+#endif
"NFS_Unstable: %8lu kB\n"
"Bounce: %8lu kB\n"
"WritebackTmp: %8lu kB\n"
"Committed_AS: %8lu kB\n"
"VmallocTotal: %8lu kB\n"
"VmallocUsed: %8lu kB\n"
- "VmallocChunk: %8lu kB\n"
- "Quicklists: %8lu kB\n",
+ "VmallocChunk: %8lu kB\n",
K(i.totalram),
K(i.freeram),
K(i.bufferram),
K(global_page_state(NR_SLAB_RECLAIMABLE)),
K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+ K(quicklist_total_size()),
+#endif
K(global_page_state(NR_UNSTABLE_NFS)),
K(global_page_state(NR_BOUNCE)),
K(global_page_state(NR_WRITEBACK_TEMP)),
K(committed),
(unsigned long)VMALLOC_TOTAL >> 10,
vmi.used >> 10,
- vmi.largest_chunk >> 10,
- K(quicklist_total_size())
+ vmi.largest_chunk >> 10
);
len += hugetlb_report_meminfo(page + len);
int subtract_lebs;
long long available;
- /*
- * Force the amount available to the total size reported if the used
- * space is zero.
- */
- if (c->lst.total_used <= UBIFS_INO_NODE_SZ &&
- c->budg_data_growth + c->budg_dd_growth == 0) {
- /* Do the same calculation as for c->block_cnt */
- available = c->main_lebs - 2;
- available *= c->leb_size - c->dark_wm;
- return available;
- }
-
available = c->main_bytes - c->lst.total_used;
/*
}
/**
- * ubifs_budg_get_free_space - return amount of free space.
+ * ubifs_reported_space - calculate reported free space.
+ * @c: the UBIFS file-system description object
+ * @free: amount of free space
+ *
+ * This function calculates amount of free space which will be reported to
+ * user-space. User-space application tend to expect that if the file-system
+ * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
+ * are able to write a file of size N. UBIFS attaches node headers to each data
+ * node and it has to write indexind nodes as well. This introduces additional
+ * overhead, and UBIFS it has to report sligtly less free space to meet the
+ * above expectetion.
+ *
+ * This function assumes free space is made up of uncompressed data nodes and
+ * full index nodes (one per data node, tripled because we always allow enough
+ * space to write the index thrice).
+ *
+ * Note, the calculation is pessimistic, which means that most of the time
+ * UBIFS reports less space than it actually has.
+ */
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free)
+{
+ int divisor, factor, f;
+
+ /*
+ * Reported space size is @free * X, where X is UBIFS block size
+ * divided by UBIFS block size + all overhead one data block
+ * introduces. The overhead is the node header + indexing overhead.
+ *
+ * Indexing overhead calculations are based on the following formula:
+ * I = N/(f - 1) + 1, where I - number of indexing nodes, N - number
+ * of data nodes, f - fanout. Because effective UBIFS fanout is twice
+ * as less than maximum fanout, we assume that each data node
+ * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes.
+ * Note, the multiplier 3 is because UBIFS reseves thrice as more space
+ * for the index.
+ */
+ f = c->fanout > 3 ? c->fanout >> 1 : 2;
+ factor = UBIFS_BLOCK_SIZE;
+ divisor = UBIFS_MAX_DATA_NODE_SZ;
+ divisor += (c->max_idx_node_sz * 3) / (f - 1);
+ free *= factor;
+ do_div(free, divisor);
+ return free;
+}
+
+/**
+ * ubifs_get_free_space - return amount of free space.
* @c: UBIFS file-system description object
*
- * This function returns amount of free space on the file-system.
+ * This function calculates amount of free space to report to user-space.
+ *
+ * Because UBIFS may introduce substantial overhead (the index, node headers,
+ * alighment, wastage at the end of eraseblocks, etc), it cannot report real
+ * amount of free flash space it has (well, because not all dirty space is
+ * reclamable, UBIFS does not actually know the real amount). If UBIFS did so,
+ * it would bread user expectetion about what free space is. Users seem to
+ * accustomed to assume that if the file-system reports N bytes of free space,
+ * they would be able to fit a file of N bytes to the FS. This almost works for
+ * traditional file-systems, because they have way less overhead than UBIFS.
+ * So, to keep users happy, UBIFS tries to take the overhead into account.
*/
-long long ubifs_budg_get_free_space(struct ubifs_info *c)
+long long ubifs_get_free_space(struct ubifs_info *c)
{
- int min_idx_lebs, rsvd_idx_lebs;
+ int min_idx_lebs, rsvd_idx_lebs, lebs;
long long available, outstanding, free;
- /* Do exactly the same calculations as in 'do_budget_space()' */
spin_lock(&c->space_lock);
min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+ outstanding = c->budg_data_growth + c->budg_dd_growth;
- if (min_idx_lebs > c->lst.idx_lebs)
- rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
- else
- rsvd_idx_lebs = 0;
-
- if (rsvd_idx_lebs > c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt
- - c->lst.taken_empty_lebs) {
+ /*
+ * Force the amount available to the total size reported if the used
+ * space is zero.
+ */
+ if (c->lst.total_used <= UBIFS_INO_NODE_SZ && !outstanding) {
spin_unlock(&c->space_lock);
- return 0;
+ return (long long)c->block_cnt << UBIFS_BLOCK_SHIFT;
}
available = ubifs_calc_available(c, min_idx_lebs);
- outstanding = c->budg_data_growth + c->budg_dd_growth;
- c->min_idx_lebs = min_idx_lebs;
+
+ /*
+ * When reporting free space to user-space, UBIFS guarantees that it is
+ * possible to write a file of free space size. This means that for
+ * empty LEBs we may use more precise calculations than
+ * 'ubifs_calc_available()' is using. Namely, we know that in empty
+ * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm.
+ * Thus, amend the available space.
+ *
+ * Note, the calculations below are similar to what we have in
+ * 'do_budget_space()', so refer there for comments.
+ */
+ if (min_idx_lebs > c->lst.idx_lebs)
+ rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+ else
+ rsvd_idx_lebs = 0;
+ lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+ c->lst.taken_empty_lebs;
+ lebs -= rsvd_idx_lebs;
+ available += lebs * (c->dark_wm - c->leb_overhead);
spin_unlock(&c->space_lock);
if (available > outstanding)
if (err) {
if (err != -ENOSPC)
return err;
- err = 0;
budgeted = 0;
}
int err;
struct ubifs_budget_req req;
loff_t old_size = inode->i_size, new_size = attr->ia_size;
- int offset = new_size & (UBIFS_BLOCK_SIZE - 1);
+ int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1;
struct ubifs_inode *ui = ubifs_inode(inode);
dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size);
/* A funny way to budget for truncation node */
req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ;
err = ubifs_budget_space(c, &req);
- if (err)
- return err;
+ if (err) {
+ /*
+ * Treat truncations to zero as deletion and always allow them,
+ * just like we do for '->unlink()'.
+ */
+ if (new_size || err != -ENOSPC)
+ return err;
+ budgeted = 0;
+ }
err = vmtruncate(inode, new_size);
if (err)
err = ubifs_jnl_truncate(c, inode, old_size, new_size);
mutex_unlock(&ui->ui_mutex);
out_budg:
- ubifs_release_budget(c, &req);
+ if (budgeted)
+ ubifs_release_budget(c, &req);
+ else {
+ c->nospace = c->nospace_rp = 0;
+ smp_wmb();
+ }
return err;
}
* dirty index heap, and it falls-back to LPT scanning if the heaps are empty
* or do not have an LEB which satisfies the @min_space criteria.
*
- * Note:
- * o LEBs which have less than dead watermark of dirty space are never picked
- * by this function;
- *
- * Returns zero and the LEB properties of
- * found dirty LEB in case of success, %-ENOSPC if no dirty LEB was found and a
- * negative error code in case of other failures. The returned LEB is marked as
- * "taken".
+ * Note, LEBs which have less than dead watermark of free + dirty space are
+ * never picked by this function.
*
* The additional @pick_free argument controls if this function has to return a
* free or freeable LEB if one is present. For example, GC must to set it to %1,
*
* In addition @pick_free is set to %2 by the recovery process in order to
* recover gc_lnum in which case an index LEB must not be returned.
+ *
+ * This function returns zero and the LEB properties of found dirty LEB in case
+ * of success, %-ENOSPC if no dirty LEB was found and a negative error code in
+ * case of other failures. The returned LEB is marked as "taken".
*/
int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
int min_space, int pick_free)
int lebs, rsvd_idx_lebs = 0;
spin_lock(&c->space_lock);
- lebs = c->lst.empty_lebs;
+ lebs = c->lst.empty_lebs + c->idx_gc_cnt;
lebs += c->freeable_cnt - c->lst.taken_empty_lebs;
/*
lp = idx_lp;
if (lp) {
- ubifs_assert(lp->dirty >= c->dead_wm);
+ ubifs_assert(lp->free + lp->dirty >= c->dead_wm);
goto found;
}
if (err)
goto out;
+ /* Allow for races with TNC */
+ c->gced_lnum = lnum;
+ smp_wmb();
+ c->gc_seq += 1;
+ smp_wmb();
+
if (c->gc_lnum == -1) {
c->gc_lnum = lnum;
err = LEB_RETAINED;
return (void *)((struct ubifs_branch *)idx->branches)->key;
}
-/**
- * ubifs_reported_space - calculate reported free space.
- * @c: the UBIFS file-system description object
- * @free: amount of free space
- *
- * This function calculates amount of free space which will be reported to
- * user-space. User-space application tend to expect that if the file-system
- * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
- * are able to write a file of size N. UBIFS attaches node headers to each data
- * node and it has to write indexind nodes as well. This introduces additional
- * overhead, and UBIFS it has to report sligtly less free space to meet the
- * above expectetion.
- *
- * This function assumes free space is made up of uncompressed data nodes and
- * full index nodes (one per data node, doubled because we always allow enough
- * space to write the index twice).
- *
- * Note, the calculation is pessimistic, which means that most of the time
- * UBIFS reports less space than it actually has.
- */
-static inline long long ubifs_reported_space(const struct ubifs_info *c,
- uint64_t free)
-{
- int divisor, factor;
-
- divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3);
- factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
- do_div(free, divisor);
-
- return free * factor;
-}
-
/**
* ubifs_current_time - round current time to time granularity.
* @inode: inode
current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
}
+/**
+ * ubifs_tnc_lookup - look up a file-system node.
+ * @c: UBIFS file-system description object
+ * @key: node key to lookup
+ * @node: the node is returned here
+ *
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure.
+ */
+static inline int ubifs_tnc_lookup(struct ubifs_info *c,
+ const union ubifs_key *key, void *node)
+{
+ return ubifs_tnc_locate(c, key, node, NULL, NULL);
+}
+
#endif /* __UBIFS_MISC_H__ */
{
struct ubifs_info *c = dentry->d_sb->s_fs_info;
unsigned long long free;
+ __le32 *uuid = (__le32 *)c->uuid;
- free = ubifs_budg_get_free_space(c);
+ free = ubifs_get_free_space(c);
dbg_gen("free space %lld bytes (%lld blocks)",
free, free >> UBIFS_BLOCK_SHIFT);
buf->f_files = 0;
buf->f_ffree = 0;
buf->f_namelen = UBIFS_MAX_NLEN;
-
+ buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
+ buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
return 0;
}
c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size);
c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size);
+ /*
+ * Calculate how many bytes would be wasted at the end of LEB if it was
+ * fully filled with data nodes of maximum size. This is used in
+ * calculations when reporting free space.
+ */
+ c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
return 0;
}
* internally because it does not make much sense for UBIFS, but it is
* necessary to report something for the 'statfs()' call.
*
- * Subtract the LEB reserved for GC and the LEB which is reserved for
- * deletions.
- *
- * Review 'ubifs_calc_available()' if changing this calculation.
+ * Subtract the LEB reserved for GC, the LEB which is reserved for
+ * deletions, and assume only one journal head is available.
*/
- tmp64 = c->main_lebs - 2;
- tmp64 *= (uint64_t)c->leb_size - c->dark_wm;
+ tmp64 = c->main_lebs - 2 - c->jhead_cnt + 1;
+ tmp64 *= (uint64_t)c->leb_size - c->leb_overhead;
tmp64 = ubifs_reported_space(c, tmp64);
c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT;
if (keys_cmp(c, key, &node_key) != 0)
ret = 0;
}
- if (ret == 0)
+ if (ret == 0 && c->replaying)
dbg_mnt("dangling branch LEB %d:%d len %d, key %s",
zbr->lnum, zbr->offs, zbr->len, DBGKEY(key));
return ret;
}
/**
- * ubifs_tnc_lookup - look up a file-system node.
+ * maybe_leb_gced - determine if a LEB may have been garbage collected.
* @c: UBIFS file-system description object
- * @key: node key to lookup
- * @node: the node is returned here
+ * @lnum: LEB number
+ * @gc_seq1: garbage collection sequence number
*
- * This function look up and reads node with key @key. The caller has to make
- * sure the @node buffer is large enough to fit the node. Returns zero in case
- * of success, %-ENOENT if the node was not found, and a negative error code in
- * case of failure.
+ * This function determines if @lnum may have been garbage collected since
+ * sequence number @gc_seq1. If it may have been then %1 is returned, otherwise
+ * %0 is returned.
*/
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
- void *node)
+static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1)
{
- int found, n, err;
- struct ubifs_znode *znode;
- struct ubifs_zbranch zbr, *zt;
+ int gc_seq2, gced_lnum;
- mutex_lock(&c->tnc_mutex);
- found = ubifs_lookup_level0(c, key, &znode, &n);
- if (!found) {
- err = -ENOENT;
- goto out;
- } else if (found < 0) {
- err = found;
- goto out;
- }
- zt = &znode->zbranch[n];
- if (is_hash_key(c, key)) {
- /*
- * In this case the leaf node cache gets used, so we pass the
- * address of the zbranch and keep the mutex locked
- */
- err = tnc_read_node_nm(c, zt, node);
- goto out;
- }
- zbr = znode->zbranch[n];
- mutex_unlock(&c->tnc_mutex);
-
- err = ubifs_tnc_read_node(c, &zbr, node);
- return err;
-
-out:
- mutex_unlock(&c->tnc_mutex);
- return err;
+ gced_lnum = c->gced_lnum;
+ smp_rmb();
+ gc_seq2 = c->gc_seq;
+ /* Same seq means no GC */
+ if (gc_seq1 == gc_seq2)
+ return 0;
+ /* Different by more than 1 means we don't know */
+ if (gc_seq1 + 1 != gc_seq2)
+ return 1;
+ /*
+ * We have seen the sequence number has increased by 1. Now we need to
+ * be sure we read the right LEB number, so read it again.
+ */
+ smp_rmb();
+ if (gced_lnum != c->gced_lnum)
+ return 1;
+ /* Finally we can check lnum */
+ if (gced_lnum == lnum)
+ return 1;
+ return 0;
}
/**
* @lnum: LEB number is returned here
* @offs: offset is returned here
*
- * This function is the same as 'ubifs_tnc_lookup()' but it returns the node
- * location also. See 'ubifs_tnc_lookup()'.
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure. The node location can be returned in @lnum and @offs.
*/
int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
void *node, int *lnum, int *offs)
{
- int found, n, err;
+ int found, n, err, safely = 0, gc_seq1;
struct ubifs_znode *znode;
struct ubifs_zbranch zbr, *zt;
+again:
mutex_lock(&c->tnc_mutex);
found = ubifs_lookup_level0(c, key, &znode, &n);
if (!found) {
goto out;
}
zt = &znode->zbranch[n];
+ if (lnum) {
+ *lnum = zt->lnum;
+ *offs = zt->offs;
+ }
if (is_hash_key(c, key)) {
/*
* In this case the leaf node cache gets used, so we pass the
* address of the zbranch and keep the mutex locked
*/
- *lnum = zt->lnum;
- *offs = zt->offs;
err = tnc_read_node_nm(c, zt, node);
goto out;
}
+ if (safely) {
+ err = ubifs_tnc_read_node(c, zt, node);
+ goto out;
+ }
+ /* Drop the TNC mutex prematurely and race with garbage collection */
zbr = znode->zbranch[n];
+ gc_seq1 = c->gc_seq;
mutex_unlock(&c->tnc_mutex);
- *lnum = zbr.lnum;
- *offs = zbr.offs;
+ if (ubifs_get_wbuf(c, zbr.lnum)) {
+ /* We do not GC journal heads */
+ err = ubifs_tnc_read_node(c, &zbr, node);
+ return err;
+ }
- err = ubifs_tnc_read_node(c, &zbr, node);
- return err;
+ err = fallible_read_node(c, key, &zbr, node);
+ if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+ /*
+ * The node may have been GC'ed out from under us so try again
+ * while keeping the TNC mutex locked.
+ */
+ safely = 1;
+ goto again;
+ }
+ return 0;
out:
mutex_unlock(&c->tnc_mutex);
{
int found, n, err;
struct ubifs_znode *znode;
- struct ubifs_zbranch zbr;
dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key));
mutex_lock(&c->tnc_mutex);
goto out_unlock;
}
- zbr = znode->zbranch[n];
- mutex_unlock(&c->tnc_mutex);
-
- err = tnc_read_node_nm(c, &zbr, node);
- return err;
+ err = tnc_read_node_nm(c, &znode->zbranch[n], node);
out_unlock:
mutex_unlock(&c->tnc_mutex);
#define UBIFS_SK_LEN 8
/* Minimum index tree fanout */
-#define UBIFS_MIN_FANOUT 2
+#define UBIFS_MIN_FANOUT 3
/* Maximum number of levels in UBIFS indexing B-tree */
#define UBIFS_MAX_LEVELS 512
* @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary
* @max_inode_sz: maximum possible inode size in bytes
* @max_znode_sz: size of znode in bytes
+ *
+ * @leb_overhead: how many bytes are wasted in an LEB when it is filled with
+ * data nodes of maximum size - used in free space reporting
* @dead_wm: LEB dead space watermark
* @dark_wm: LEB dark space watermark
* @block_cnt: count of 4KiB blocks on the FS
* @sbuf: a buffer of LEB size used by GC and replay for scanning
* @idx_gc: list of index LEBs that have been garbage collected
* @idx_gc_cnt: number of elements on the idx_gc list
+ * @gc_seq: incremented for every non-index LEB garbage collected
+ * @gced_lnum: last non-index LEB that was garbage collected
*
* @infos_list: links all 'ubifs_info' objects
* @umount_mutex: serializes shrinker and un-mount
int max_idx_node_sz;
long long max_inode_sz;
int max_znode_sz;
+
+ int leb_overhead;
int dead_wm;
int dark_wm;
int block_cnt;
void *sbuf;
struct list_head idx_gc;
int idx_gc_cnt;
+ volatile int gc_seq;
+ volatile int gced_lnum;
struct list_head infos_list;
struct mutex umount_mutex;
struct ubifs_budget_req *req);
void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
struct ubifs_budget_req *req);
-long long ubifs_budg_get_free_space(struct ubifs_info *c);
+long long ubifs_get_free_space(struct ubifs_info *c);
int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
void ubifs_convert_page_budget(struct ubifs_info *c);
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free);
long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs);
/* find.c */
/* tnc.c */
int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key,
struct ubifs_znode **zn, int *n);
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
- void *node);
int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
void *node, const struct qstr *nm);
int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
.release = udf_release_file,
.fsync = udf_fsync_file,
.splice_read = generic_file_splice_read,
+ .llseek = generic_file_llseek,
};
const struct inode_operations udf_file_inode_operations = {
*err = -ENOSPC;
iinfo = UDF_I(inode);
- iinfo->i_unique = 0;
- iinfo->i_lenExtents = 0;
- iinfo->i_next_alloc_block = 0;
- iinfo->i_next_alloc_goal = 0;
- iinfo->i_strat4096 = 0;
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
+ iinfo->i_efe = 1;
+ if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+ sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry),
+ GFP_KERNEL);
+ } else {
+ iinfo->i_efe = 0;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct fileEntry),
+ GFP_KERNEL);
+ }
+ if (!iinfo->i_ext.i_data) {
+ iput(inode);
+ *err = -ENOMEM;
+ return NULL;
+ }
block = udf_new_block(dir->i_sb, NULL,
dinfo->i_location.partitionReferenceNum,
lvhd->uniqueID = cpu_to_le64(uniqueID);
mark_buffer_dirty(sbi->s_lvid_bh);
}
+ mutex_unlock(&sbi->s_alloc_mutex);
inode->i_mode = mode;
inode->i_uid = current->fsuid;
if (dir->i_mode & S_ISGID) {
iinfo->i_lenEAttr = 0;
iinfo->i_lenAlloc = 0;
iinfo->i_use = 0;
- if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
- iinfo->i_efe = 1;
- if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
- sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct extendedFileEntry),
- GFP_KERNEL);
- } else {
- iinfo->i_efe = 0;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct fileEntry),
- GFP_KERNEL);
- }
- if (!iinfo->i_ext.i_data) {
- iput(inode);
- *err = -ENOMEM;
- mutex_unlock(&sbi->s_alloc_mutex);
- return NULL;
- }
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
iinfo->i_crtime = current_fs_time(inode->i_sb);
insert_inode_hash(inode);
mark_inode_dirty(inode);
- mutex_unlock(&sbi->s_alloc_mutex);
if (DQUOT_ALLOC_INODE(inode)) {
DQUOT_DROP(inode);
offset = (xfs_off_t)iblock << inode->i_blkbits;
ASSERT(bh_result->b_size >= (1 << inode->i_blkbits));
size = bh_result->b_size;
+
+ if (!create && direct && offset >= i_size_read(inode))
+ return 0;
+
error = xfs_iomap(XFS_I(inode), offset, size,
create ? flags : BMAPI_READ, &iomap, &niomap);
if (error)
mp->m_flags &= ~XFS_MOUNT_BARRIER;
break;
default:
+ /*
+ * Logically we would return an error here to prevent
+ * users from believing they might have changed
+ * mount options using remount which can't be changed.
+ *
+ * But unfortunately mount(8) adds all options from
+ * mtab and fstab to the mount arguments in some cases
+ * so we can't blindly reject options, but have to
+ * check for each specified option if it actually
+ * differs from the currently set option and only
+ * reject it if that's the case.
+ *
+ * Until that is implemented we return success for
+ * every remount request, and silently ignore all
+ * options that we can't actually change.
+ */
+#if 0
printk(KERN_INFO
"XFS: mount option \"%s\" not supported for remount\n", p);
return -EINVAL;
+#else
+ return 0;
+#endif
}
}
bip->bli_item.li_ops = &xfs_buf_item_ops;
bip->bli_item.li_mountp = mp;
bip->bli_buf = bp;
+ xfs_buf_hold(bp);
bip->bli_format.blf_type = XFS_LI_BUF;
bip->bli_format.blf_blkno = (__int64_t)XFS_BUF_ADDR(bp);
bip->bli_format.blf_len = (ushort)BTOBB(XFS_BUF_COUNT(bp));
return (bip->bli_flags & XFS_BLI_DIRTY);
}
+STATIC void
+xfs_buf_item_free(
+ xfs_buf_log_item_t *bip)
+{
+#ifdef XFS_TRANS_DEBUG
+ kmem_free(bip->bli_orig);
+ kmem_free(bip->bli_logged);
+#endif /* XFS_TRANS_DEBUG */
+
+#ifdef XFS_BLI_TRACE
+ ktrace_free(bip->bli_trace);
+#endif
+ kmem_zone_free(xfs_buf_item_zone, bip);
+}
+
/*
* This is called when the buf log item is no longer needed. It should
* free the buf log item associated with the given buffer and clear
(XFS_BUF_IODONE_FUNC(bp) != NULL)) {
XFS_BUF_CLR_IODONE_FUNC(bp);
}
-
-#ifdef XFS_TRANS_DEBUG
- kmem_free(bip->bli_orig);
- bip->bli_orig = NULL;
- kmem_free(bip->bli_logged);
- bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
- ktrace_free(bip->bli_trace);
-#endif
- kmem_zone_free(xfs_buf_item_zone, bip);
+ xfs_buf_rele(bp);
+ xfs_buf_item_free(bip);
}
ASSERT(bip->bli_buf == bp);
+ xfs_buf_rele(bp);
mp = bip->bli_item.li_mountp;
/*
* xfs_trans_delete_ail() drops the AIL lock.
*/
xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip);
-
-#ifdef XFS_TRANS_DEBUG
- kmem_free(bip->bli_orig);
- bip->bli_orig = NULL;
- kmem_free(bip->bli_logged);
- bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
- ktrace_free(bip->bli_trace);
-#endif
- kmem_zone_free(xfs_buf_item_zone, bip);
+ xfs_buf_item_free(bip);
}
#if defined(XFS_BLI_TRACE)
sbp = &sxp->sx_stat;
- xfs_lock_two_inodes(ip, tip, lock_flags);
+ /*
+ * we have to do two separate lock calls here to keep lockdep
+ * happy. If we try to get all the locks in one call, lock will
+ * report false positives when we drop the ILOCK and regain them
+ * below.
+ */
+ xfs_lock_two_inodes(ip, tip, XFS_IOLOCK_EXCL);
+ xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL);
locked = 1;
/* Verify that both files have the same format */
STATIC int xlog_iclogs_empty(xlog_t *log);
#if defined(XFS_LOG_TRACE)
+
+#define XLOG_TRACE_LOGGRANT_SIZE 2048
+#define XLOG_TRACE_ICLOG_SIZE 256
+
+void
+xlog_trace_loggrant_alloc(xlog_t *log)
+{
+ log->l_grant_trace = ktrace_alloc(XLOG_TRACE_LOGGRANT_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_loggrant_dealloc(xlog_t *log)
+{
+ ktrace_free(log->l_grant_trace);
+}
+
void
xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string)
{
unsigned long cnts;
- if (!log->l_grant_trace) {
- log->l_grant_trace = ktrace_alloc(2048, KM_NOSLEEP);
- if (!log->l_grant_trace)
- return;
- }
/* ticket counts are 1 byte each */
cnts = ((unsigned long)tic->t_ocnt) | ((unsigned long)tic->t_cnt) << 8;
(void *)((unsigned long)tic->t_unit_res));
}
+void
+xlog_trace_iclog_alloc(xlog_in_core_t *iclog)
+{
+ iclog->ic_trace = ktrace_alloc(XLOG_TRACE_ICLOG_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_iclog_dealloc(xlog_in_core_t *iclog)
+{
+ ktrace_free(iclog->ic_trace);
+}
+
void
xlog_trace_iclog(xlog_in_core_t *iclog, uint state)
{
- if (!iclog->ic_trace)
- iclog->ic_trace = ktrace_alloc(256, KM_NOFS);
ktrace_enter(iclog->ic_trace,
(void *)((unsigned long)state),
(void *)((unsigned long)current_pid()),
(void *)NULL, (void *)NULL);
}
#else
+
+#define xlog_trace_loggrant_alloc(log)
+#define xlog_trace_loggrant_dealloc(log)
#define xlog_trace_loggrant(log,tic,string)
+
+#define xlog_trace_iclog_alloc(iclog)
+#define xlog_trace_iclog_dealloc(iclog)
#define xlog_trace_iclog(iclog,state)
+
#endif /* XFS_LOG_TRACE */
* layer, it means the underlyin device no longer supports
* barrier I/O. Warn loudly and turn off barriers.
*/
- if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ORDERED(bp)) {
+ if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ISORDERED(bp)) {
l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER;
xfs_fs_cmn_err(CE_WARN, l->l_mp,
"xlog_iodone: Barriers are no longer supported"
spin_lock_init(&log->l_grant_lock);
sv_init(&log->l_flush_wait, 0, "flush_wait");
+ xlog_trace_loggrant_alloc(log);
/* log record size must be multiple of BBSIZE; see xlog_rec_header_t */
ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0);
sv_init(&iclog->ic_force_wait, SV_DEFAULT, "iclog-force");
sv_init(&iclog->ic_write_wait, SV_DEFAULT, "iclog-write");
+ xlog_trace_iclog_alloc(iclog);
+
iclogp = &iclog->ic_next;
}
*iclogp = log->l_iclog; /* complete ring */
sv_destroy(&iclog->ic_force_wait);
sv_destroy(&iclog->ic_write_wait);
xfs_buf_free(iclog->ic_bp);
-#ifdef XFS_LOG_TRACE
- if (iclog->ic_trace != NULL) {
- ktrace_free(iclog->ic_trace);
- }
-#endif
+ xlog_trace_iclog_dealloc(iclog);
next_iclog = iclog->ic_next;
kmem_free(iclog);
iclog = next_iclog;
spinlock_destroy(&log->l_grant_lock);
xfs_buf_free(log->l_xbuf);
-#ifdef XFS_LOG_TRACE
- if (log->l_trace != NULL) {
- ktrace_free(log->l_trace);
- }
- if (log->l_grant_trace != NULL) {
- ktrace_free(log->l_grant_trace);
- }
-#endif
+ xlog_trace_loggrant_dealloc(log);
log->l_mp->m_log = NULL;
kmem_free(log);
} /* xlog_dealloc_log */
int l_grant_write_bytes;
#ifdef XFS_LOG_TRACE
- struct ktrace *l_trace;
struct ktrace *l_grant_trace;
#endif
#endif
}
+/*
+ * xfs_lock_two_inodes() can only be used to lock one type of lock
+ * at a time - the iolock or the ilock, but not both at once. If
+ * we lock both at once, lockdep will report false positives saying
+ * we have violated locking orders.
+ */
void
xfs_lock_two_inodes(
xfs_inode_t *ip0,
int attempts = 0;
xfs_log_item_t *lp;
+ if (lock_mode & (XFS_IOLOCK_SHARED|XFS_IOLOCK_EXCL))
+ ASSERT((lock_mode & (XFS_ILOCK_SHARED|XFS_ILOCK_EXCL)) == 0);
ASSERT(ip0->i_ino != ip1->i_ino);
if (ip0->i_ino > ip1->i_ino) {
/*
* Zero file bytes between startoff and endoff inclusive.
* The iolock is held exclusive and no blocks are buffered.
+ *
+ * This function is used by xfs_free_file_space() to zero
+ * partial blocks when the range to free is not block aligned.
+ * When unreserving space with boundaries that are not block
+ * aligned we round up the start and round down the end
+ * boundaries and then use this function to zero the parts of
+ * the blocks that got dropped during the rounding.
*/
STATIC int
xfs_zero_remaining_bytes(
int nimap;
int error = 0;
+ /*
+ * Avoid doing I/O beyond eof - it's not necessary
+ * since nothing can read beyond eof. The space will
+ * be zeroed when the file is extended anyway.
+ */
+ if (startoff >= ip->i_size)
+ return 0;
+
+ if (endoff > ip->i_size)
+ endoff = ip->i_size;
+
bp = xfs_buf_get_noaddr(mp->m_sb.sb_blocksize,
XFS_IS_REALTIME_INODE(ip) ?
mp->m_rtdev_targp : mp->m_ddev_targp);
unlikely(__ret_warn_once); \
})
+#define WARN_ONCE(condition, format...) ({ \
+ static int __warned; \
+ int __ret_warn_once = !!(condition); \
+ \
+ if (unlikely(__ret_warn_once)) \
+ if (WARN(!__warned, format)) \
+ __warned = 1; \
+ unlikely(__ret_warn_once); \
+})
+
#define WARN_ON_RATELIMIT(condition, state) \
WARN_ON((condition) && __ratelimit(state))
extern char __initdata_begin[], __initdata_end[];
extern char __start_rodata[], __end_rodata[];
+/* function descriptor handling (if any). Override
+ * in asm/sections.h */
+#ifndef dereference_function_descriptor
+#define dereference_function_descriptor(p) (p)
+#endif
+
#endif /* _ASM_GENERIC_SECTIONS_H_ */
/* nothing to see, move along */
#include <asm-generic/sections.h>
+#ifdef CONFIG_64BIT
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+#endif
+
#endif
static inline int lba_28_ok(u64 block, u32 n_block)
{
/* check the ending block number */
- return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
+ return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
}
static inline int lba_48_ok(u64 block, u32 n_block)
*/
extern int blk_verify_command(struct blk_cmd_filter *filter,
unsigned char *cmd, int has_write_perm);
-extern int blk_register_filter(struct gendisk *disk);
-extern void blk_unregister_filter(struct gendisk *disk);
extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
#define MAX_PHYS_SEGMENTS 128
struct resource *parent, resource_size_t start,
resource_size_t n, const char *name);
-#define devm_release_region(start,n) \
+#define devm_release_region(dev, start, n) \
__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(start,n) \
+#define devm_release_mem_region(dev, start, n) \
__devm_release_region(dev, &iomem_resource, (start), (n))
extern void __devm_release_region(struct device *dev, struct resource *parent,
struct ms_status_register {
unsigned char reserved;
unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK 0x0001
-#define MEMSTICK_INT_IOREQ 0x0008
-#define MEMSTICK_INT_IOBREQ 0x0010
-#define MEMSTICK_INT_BREQ 0x0020
-#define MEMSTICK_INT_ERR 0x0040
-#define MEMSTICK_INT_CED 0x0080
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ 0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ 0x20
+#define MEMSTICK_INT_ERR 0x40
+#define MEMSTICK_INT_CED 0x80
unsigned char status0;
-#define MEMSTICK_STATUS0_WP 0x0001
-#define MEMSTICK_STATUS0_SL 0x0002
-#define MEMSTICK_STATUS0_BF 0x0010
-#define MEMSTICK_STATUS0_BE 0x0020
-#define MEMSTICK_STATUS0_FB0 0x0040
-#define MEMSTICK_STATUS0_MB 0x0080
+#define MEMSTICK_STATUS0_WP 0x01
+#define MEMSTICK_STATUS0_SL 0x02
+#define MEMSTICK_STATUS0_BF 0x10
+#define MEMSTICK_STATUS0_BE 0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB 0x80
unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG 0x0001
-#define MEMSTICK_STATUS1_FGER 0x0002
-#define MEMSTICK_STATUS1_UCEX 0x0004
-#define MEMSTICK_STATUS1_EXER 0x0008
-#define MEMSTICK_STATUS1_UCDT 0x0010
-#define MEMSTICK_STATUS1_DTER 0x0020
-#define MEMSTICK_STATUS1_FBI 0x0040
-#define MEMSTICK_STATUS1_MB 0x0080
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1 0x40
+#define MEMSTICK_STATUS1_MB 0x80
} __attribute__((packed));
struct ms_id_register {
struct ms_param_register {
unsigned char system;
-#define MEMSTICK_SYS_ATEN 0xc0
-#define MEMSTICK_SYS_BAMD 0x80
#define MEMSTICK_SYS_PAM 0x08
+#define MEMSTICK_SYS_BAMD 0x80
unsigned char block_address_msb;
unsigned short block_address;
unsigned char cp;
-#define MEMSTICK_CP_BLOCK 0x0000
-#define MEMSTICK_CP_PAGE 0x0020
-#define MEMSTICK_CP_EXTRA 0x0040
-#define MEMSTICK_CP_OVERWRITE 0x0080
+#define MEMSTICK_CP_BLOCK 0x00
+#define MEMSTICK_CP_PAGE 0x20
+#define MEMSTICK_CP_EXTRA 0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
unsigned char page_address;
} __attribute__((packed));
struct ms_extra_data_register {
unsigned char overwrite_flag;
-#define MEMSTICK_OVERWRITE_UPDATA 0x0010
-#define MEMSTICK_OVERWRITE_PAGE 0x0060
-#define MEMSTICK_OVERWRITE_BLOCK 0x0080
+#define MEMSTICK_OVERWRITE_UDST 0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST 0x80
unsigned char management_flag;
-#define MEMSTICK_MANAGEMENT_SYSTEM 0x0004
-#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008
-#define MEMSTICK_MANAGEMENT_COPY 0x0010
-#define MEMSTICK_MANAGEMENT_ACCESS 0x0020
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG 0x08
+#define MEMSTICK_MANAGEMENT_SCMS1 0x10
+#define MEMSTICK_MANAGEMENT_SCMS0 0x20
unsigned short logical_address;
} __attribute__((packed));
struct mspro_param_register {
unsigned char system;
-#define MEMSTICK_SYS_SERIAL 0x80
#define MEMSTICK_SYS_PAR4 0x00
#define MEMSTICK_SYS_PAR8 0x40
+#define MEMSTICK_SYS_SERIAL 0x80
unsigned short data_count;
unsigned int data_address;
unsigned char w_length;
} __attribute__((packed));
-enum {
+enum memstick_tpc {
MS_TPC_READ_MG_STATUS = 0x01,
MS_TPC_READ_LONG_DATA = 0x02,
MS_TPC_READ_SHORT_DATA = 0x03,
MS_TPC_SET_CMD = 0x0e
};
-enum {
+enum memstick_command {
MS_CMD_BLOCK_END = 0x33,
MS_CMD_RESET = 0x3c,
MS_CMD_BLOCK_WRITE = 0x55,
/*** Driver structures and functions ***/
-#define MEMSTICK_PART_SHIFT 3
-
enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
#define MEMSTICK_POWER_OFF 0
struct memstick_host;
struct memstick_driver;
+struct memstick_device_id {
+ unsigned char match_flags;
#define MEMSTICK_MATCH_ALL 0x01
+ unsigned char type;
#define MEMSTICK_TYPE_LEGACY 0xff
#define MEMSTICK_TYPE_DUO 0x00
#define MEMSTICK_TYPE_PRO 0x01
+ unsigned char category;
#define MEMSTICK_CATEGORY_STORAGE 0xff
#define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO 0x01
+#define MEMSTICK_CATEGORY_IO_PRO 0x10
-#define MEMSTICK_CLASS_GENERIC 0xff
-#define MEMSTICK_CLASS_GENERIC_DUO 0x00
-
-
-struct memstick_device_id {
- unsigned char match_flags;
- unsigned char type;
- unsigned char category;
unsigned char class;
+#define MEMSTICK_CLASS_FLASH 0xff
+#define MEMSTICK_CLASS_DUO 0x00
+#define MEMSTICK_CLASS_ROM 0x01
+#define MEMSTICK_CLASS_RO 0x02
+#define MEMSTICK_CLASS_WP 0x03
};
struct memstick_request {
void memstick_resume_host(struct memstick_host *host);
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg);
+ const struct scatterlist *sg);
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length);
+ const void *buf, size_t length);
int memstick_next_req(struct memstick_host *host,
struct memstick_request **mrq);
void memstick_new_req(struct memstick_host *host);
MLX4_STAT_RATE_OFFSET = 5
};
+enum {
+ MLX4_MTT_FLAG_PRESENT = 1
+};
+
static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
{
return (major << 32) | (minor << 16) | subminor;
*
* This function returns the next zone at or below a given zone index that is
* within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that is used as the next starting
- * point for future calls to next_zones_zonelist().
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
*/
struct zoneref *next_zones_zonelist(struct zoneref *z,
enum zone_type highest_zoneidx,
*
* This function returns the first zone at or below a given zone index that is
* within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist. The cursor should
- * not be used by the caller as it does not match the value of the zone
- * returned.
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
*/
static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
enum zone_type highest_zoneidx,
#define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone); \
zone; \
- z = next_zones_zonelist(z, highidx, nodemask, &zone)) \
+ z = next_zones_zonelist(++z, highidx, nodemask, &zone)) \
/**
* for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
/*
* Resource Management
*/
+#ifdef CONFIG_PNP
struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int);
+#else
+static inline struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned int type, unsigned int num)
+{
+ return NULL;
+}
+#endif
static inline int pnp_resource_valid(struct resource *res)
{
__u8 scsi_lun[8];
};
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+ return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
/*
* MESSAGE CODES
*/
/**
* update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
* @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
*
* Called with cgroup_mutex held
*
* The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
* calling callback functions for each.
*
- * Return 0 if successful, -errno if not.
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
*/
-static int update_tasks_cpumask(struct cpuset *cs)
+static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap)
{
struct cgroup_scanner scan;
- struct ptr_heap heap;
- int retval;
-
- /*
- * cgroup_scan_tasks() will initialize heap->gt for us.
- * heap_init() is still needed here for we should not change
- * cs->cpus_allowed when heap_init() fails.
- */
- retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
- if (retval)
- return retval;
scan.cg = cs->css.cgroup;
scan.test_task = cpuset_test_cpumask;
scan.process_task = cpuset_change_cpumask;
- scan.heap = &heap;
- retval = cgroup_scan_tasks(&scan);
-
- heap_free(&heap);
- return retval;
+ scan.heap = heap;
+ cgroup_scan_tasks(&scan);
}
/**
*/
static int update_cpumask(struct cpuset *cs, const char *buf)
{
+ struct ptr_heap heap;
struct cpuset trialcs;
int retval;
int is_load_balanced;
if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
return 0;
+ retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+ if (retval)
+ return retval;
+
is_load_balanced = is_sched_load_balance(&trialcs);
mutex_lock(&callback_mutex);
* Scan tasks in the cpuset, and update the cpumasks of any
* that need an update.
*/
- retval = update_tasks_cpumask(cs);
- if (retval < 0)
- return retval;
+ update_tasks_cpumask(cs, &heap);
+
+ heap_free(&heap);
if (is_load_balanced)
async_rebuild_sched_domains();
nodes_empty(cp->mems_allowed))
remove_tasks_in_empty_cpuset(cp);
else {
- update_tasks_cpumask(cp);
+ update_tasks_cpumask(cp, NULL);
update_tasks_nodemask(cp, &oldmems);
}
}
u64 rt_runtime, rt_period;
int ret = 0;
+ if (sysctl_sched_rt_period <= 0)
+ return -EINVAL;
+
rt_period = ktime_to_ns(tg->rt_bandwidth.rt_period);
rt_runtime = tg->rt_bandwidth.rt_runtime;
unsigned long flags;
int i;
+ if (sysctl_sched_rt_period <= 0)
+ return -EINVAL;
+
spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
for_each_possible_cpu(i) {
struct rt_rq *rt_rq = &cpu_rq(i)->rt;
spin_lock(&rt_rq->rt_runtime_lock);
rt_rq->rt_runtime = rt_b->rt_runtime;
rt_rq->rt_time = 0;
+ rt_rq->rt_throttled = 0;
spin_unlock(&rt_rq->rt_runtime_lock);
spin_unlock(&rt_b->rt_runtime_lock);
}
}
}
+/**
+ * clockevents_shutdown - shutdown the device and clear next_event
+ * @dev: device to shutdown
+ */
+void clockevents_shutdown(struct clock_event_device *dev)
+{
+ clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN);
+ dev->next_event.tv64 = KTIME_MAX;
+}
+
/**
* clockevents_program_event - Reprogram the clock event device.
* @expires: absolute expiry time (monotonic clock)
if (new) {
BUG_ON(new->mode != CLOCK_EVT_MODE_UNUSED);
- clockevents_set_mode(new, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(new);
}
local_irq_restore(flags);
}
if (!cpu_isset(cpu, tick_broadcast_mask)) {
cpu_set(cpu, tick_broadcast_mask);
if (td->mode == TICKDEV_MODE_PERIODIC)
- clockevents_set_mode(dev,
- CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(dev);
}
if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE)
tick_broadcast_force = 1;
if (cpus_empty(tick_broadcast_mask)) {
if (!bc_stopped)
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(bc);
} else if (bc_stopped) {
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
tick_broadcast_start_periodic(bc);
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) {
if (bc && cpus_empty(tick_broadcast_mask))
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(bc);
}
spin_unlock_irqrestore(&tick_broadcast_lock, flags);
bc = tick_broadcast_device.evtdev;
if (bc)
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(bc);
spin_unlock_irqrestore(&tick_broadcast_lock, flags);
}
* not give it back to the clockevents layer !
*/
if (tick_is_broadcast_device(curdev)) {
- clockevents_set_mode(curdev, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(curdev);
curdev = NULL;
}
clockevents_exchange_device(curdev, newdev);
unsigned long flags;
spin_lock_irqsave(&tick_device_lock, flags);
- clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(td->evtdev);
spin_unlock_irqrestore(&tick_device_lock, flags);
}
extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast);
extern void tick_handle_periodic(struct clock_event_device *dev);
+extern void clockevents_shutdown(struct clock_event_device *dev);
+
/*
* NO_HZ / high resolution timer shared code
*/
* and emit a warning.
*/
if (++i > 2) {
- printk(KERN_WARNING "CE: __tick_program_event of %s is "
- "stuck %llx %llx\n", dev->name ? dev->name : "?",
- now.tv64, expires.tv64);
- printk(KERN_WARNING
- "CE: increasing min_delta_ns %ld to %ld nsec\n",
- dev->min_delta_ns, dev->min_delta_ns << 1);
- WARN_ON(1);
-
- /* Double the min. delta and try again */
+ /* Increase the min. delta and try again */
if (!dev->min_delta_ns)
dev->min_delta_ns = 5000;
else
- dev->min_delta_ns <<= 1;
+ dev->min_delta_ns += dev->min_delta_ns >> 1;
+
+ printk(KERN_WARNING
+ "CE: %s increasing min_delta_ns to %lu nsec\n",
+ dev->name ? dev->name : "?",
+ dev->min_delta_ns << 1);
+
i = 0;
}
{
unsigned int offset = 0;
struct sg_mapping_iter miter;
+ unsigned long flags;
sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+ local_irq_save(flags);
+
while (sg_miter_next(&miter) && offset < buflen) {
unsigned int len;
sg_miter_stop(&miter);
+ local_irq_restore(flags);
return offset;
}
* the lowest available address range.
*/
dma_addr_t handle;
- handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
+ handle = swiotlb_map_single(hwdev, NULL, size, DMA_FROM_DEVICE);
if (swiotlb_dma_mapping_error(hwdev, handle))
return NULL;
#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/div64.h>
+#include <asm/sections.h> /* for dereference_function_descriptor() */
/* Works only for digits and letters, but small and fast */
#define TOLOWER(x) ((x) | 0x20)
return buf;
}
-static inline void *dereference_function_descriptor(void *ptr)
-{
-#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
- void *p;
- if (!probe_kernel_address(ptr, p))
- ptr = p;
-#endif
- return ptr;
-}
-
static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags)
{
unsigned long value = (unsigned long) ptr;
(z->zone && !zref_in_nodemask(z, nodes)))
z++;
- *zone = zonelist_zone(z++);
+ *zone = zonelist_zone(z);
return z;
}
INIT_LIST_HEAD(&n->partial);
#ifdef CONFIG_SLUB_DEBUG
atomic_long_set(&n->nr_slabs, 0);
+ atomic_long_set(&n->total_objects, 0);
INIT_LIST_HEAD(&n->full);
#endif
}
time_after(jiffies, (dev->trans_start +
dev->watchdog_timeo))) {
char drivername[64];
- printk(KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
+ WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
dev->name, netdev_drivername(dev, drivername, 64));
dev->tx_timeout(dev);
- WARN_ON_ONCE(1);
}
if (!mod_timer(&dev->watchdog_timer,
round_jiffies(jiffies +
projects / linux-2.6-omap-h63xx.git / commitdiff