obj-y += intc.o
obj-$(CONFIG_SUPERH32) += imask.o
+obj-$(CONFIG_CPU_SH5) += intc-sh5.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o
* controller.
*
*/
-
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/bitops.h> /* this includes also <asm/registers.h */
- /* which is required to remap register */
- /* names used into __asm__ blocks... */
-
-#include <asm/hardware.h>
-#include <asm/platform.h>
+#include <linux/bitops.h>
+#include <asm/cpu/irq.h>
#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
/*
* Maybe the generic Peripheral block could move to a more
}
#endif
-void __init init_IRQ(void)
+void __init plat_irq_setup(void)
{
unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
unsigned long reg;
}
}
-#ifdef CONFIG_SH_CAYMAN
- {
- extern void init_cayman_irq(void);
-
- init_cayman_irq();
- }
-#endif
-
/*
* And now let interrupts come in.
* sti() is not enough, we need to
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_KALLSYMS) += unwind.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH5_101) += setup-sh5-101.o
-obj-$(CONFIG_CPU_SUBTYPE_SH5_103) += setup-sh5-101.o
+++ /dev/null
-/*
- * SH5-101 Setup
- *
- * Copyright (C) 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-
-void __init plat_irq_setup(void)
-{
- /* do nothing - all IRL interrupts are handled by the board code */
-}
#
# Makefile for the Hitachi Cayman specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-obj-y := setup.o irq.o iomap.o
+obj-y := setup.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o
-
+++ /dev/null
-/*
- * arch/sh64/mach-cayman/iomap.c
- *
- * Cayman iomap interface
- *
- * Copyright (C) 2004 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/io.h>
-#include <asm/cayman.h>
-
-void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
- if (port < 0x400)
- return (void __iomem *)((port << 2) | smsc_superio_virt);
-
- return (void __iomem *)port;
-}
-
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/irq_cayman.c
- *
- * SH-5 Cayman Interrupt Support
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
*
* This file handles the board specific parts of the Cayman interrupt system
*
* Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/signal.h>
-#include <asm/cayman.h>
+#include <asm/cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ IRQ_IRL3
unsigned long epld_virt;
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/mach-cayman/setup.c
+ * arch/sh/mach-cayman/setup.c
*
* SH5 Cayman support
*
- * This file handles the architecture-dependent parts of initialization
+ * Copyright (C) 2002 David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007 Paul Mundt
*
- * Copyright David J. Mckay.
- * Needs major work!
- *
- * benedict.gaster@superh.com: 3rd May 2002
- * Added support for ramdisk, removing statically linked romfs at the same time.
- *
- * lethal@linux-sh.org: 15th May 2003
- * Use the generic procfs cpuinfo interface, just return a valid board name.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
-#include <asm/platform.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <asm/cpu/irq.h>
/*
* Platform Dependent Interrupt Priorities.
unsigned long smsc_superio_virt;
-/*
- * Platform dependent structures: maps and parms block.
- */
-struct resource io_resources[] = {
- /* To be updated with external devices */
-};
-
-struct resource kram_resources[] = {
- /* These must be last in the array */
- { .name = "Kernel code", .start = 0, .end = 0 },
- /* These must be last in the array */
- { .name = "Kernel data", .start = 0, .end = 0 }
-};
-
-struct resource xram_resources[] = {
- /* To be updated with external devices */
-};
-
-struct resource rom_resources[] = {
- /* To be updated with external devices */
-};
-
-struct sh64_platform platform_parms = {
- .readonly_rootfs = 1,
- .initial_root_dev = 0x0100,
- .loader_type = 1,
- .io_res_p = io_resources,
- .io_res_count = ARRAY_SIZE(io_resources),
- .kram_res_p = kram_resources,
- .kram_res_count = ARRAY_SIZE(kram_resources),
- .xram_res_p = xram_resources,
- .xram_res_count = ARRAY_SIZE(xram_resources),
- .rom_res_p = rom_resources,
- .rom_res_count = ARRAY_SIZE(rom_resources),
-};
-
int platform_int_priority[NR_INTC_IRQS] = {
IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
return 0;
}
-
-/* This is grotty, but, because kernel is always referenced on the link line
- * before any devices, this is safe.
- */
__initcall(smsc_superio_setup);
-void __init platform_setup(void)
-{
- /* Cayman platform leaves the decision to head.S, for now */
- platform_parms.fpu_flags = fpu_in_use;
-}
-
-void __init platform_monitor(void)
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
{
- /* Nothing yet .. */
-}
+ if (port < 0x400) {
+ extern unsigned long smsc_superio_virt;
+ return (void __iomem *)((port << 2) | smsc_superio_virt);
+ }
-void __init platform_reserve(void)
-{
- /* Nothing yet .. */
+ return (void __iomem *)port;
}
-const char *get_system_type(void)
-{
- return "Hitachi Cayman";
-}
+extern void init_cayman_irq(void);
+static struct sh_machine_vector mv_cayman __initmv = {
+ .mv_name = "Hitachi Cayman",
+ .mv_nr_irqs = 64,
+ .mv_ioport_map = cayman_ioport_map,
+ .mv_init_irq = init_cayman_irq,
+};
#define NR_EXT_IRQS 0
#endif
-#define NR_IRQS (NR_INTC_IRQS+NR_EXT_IRQS)
-
-
/* Default IRQs, fixed */
#define TIMER_IRQ IRQ_TUNI0
#define RTC_IRQ IRQ_CUI
extern int intc_evt_to_irq[(0xE20/0x20)+1];
int intc_irq_describe(char* p, int irq);
-
-#define irq_canonicalize(irq) (irq)
-
-#ifdef CONFIG_SH_CAYMAN
-int cayman_irq_demux(int evt);
-int cayman_irq_describe(char* p, int irq);
-#define irq_demux(x) cayman_irq_demux(x)
-#define irq_describe(p, x) cayman_irq_describe(p, x)
-#else
-#define irq_demux(x) (intc_evt_to_irq[x])
-#define irq_describe(p, x) intc_irq_describe(p, x)
-#endif
-
-/*
- * Function for "on chip support modules".
- */
-
-/*
- * SH-5 supports Priority based interrupts only.
- * Interrupt priorities are defined at platform level.
- */
-#define set_ipr_data(a, b, c, d)
-#define make_ipr_irq(a)
-#define make_imask_irq(a)
+extern int platform_int_priority[NR_INTC_IRQS];
#endif /* __ASM_SH64_IRQ_H */
+++ /dev/null
-#ifndef __ASM_SH64_PLATFORM_H
-#define __ASM_SH64_PLATFORM_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/platform.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * benedict.gaster@superh.com: 3rd May 2002
- * Added support for ramdisk, removing statically linked romfs at the same time.
- */
-
-#include <linux/ioport.h>
-#include <asm/irq.h>
-
-
-/*
- * Platform definition structure.
- */
-struct sh64_platform {
- unsigned int readonly_rootfs;
- unsigned int ramdisk_flags;
- unsigned int initial_root_dev;
- unsigned int loader_type;
- unsigned int initrd_start;
- unsigned int initrd_size;
- unsigned int fpu_flags;
- unsigned int io_res_count;
- unsigned int kram_res_count;
- unsigned int xram_res_count;
- unsigned int rom_res_count;
- struct resource *io_res_p;
- struct resource *kram_res_p;
- struct resource *xram_res_p;
- struct resource *rom_res_p;
-};
-
-extern struct sh64_platform platform_parms;
-
-extern unsigned long long memory_start, memory_end;
-
-extern unsigned long long fpu_in_use;
-
-extern int platform_int_priority[NR_INTC_IRQS];
-
-#define FPU_FLAGS (platform_parms.fpu_flags)
-#define STANDARD_IO_RESOURCES (platform_parms.io_res_count)
-#define STANDARD_KRAM_RESOURCES (platform_parms.kram_res_count)
-#define STANDARD_XRAM_RESOURCES (platform_parms.xram_res_count)
-#define STANDARD_ROM_RESOURCES (platform_parms.rom_res_count)
-
-/*
- * Kernel Memory description, Respectively:
- * code = last but one memory descriptor
- * data = last memory descriptor
- */
-#define code_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 2])
-#define data_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 1])
-
-#endif /* __ASM_SH64_PLATFORM_H */
projects / linux-2.6-omap-h63xx.git / commitdiff