]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[ALSA] [snd-intel-hda] enable center/LFE speaker on some laptops
authorRichard Fish <bigfish@asmallpond.org>
Wed, 6 Sep 2006 11:58:25 +0000 (13:58 +0200)
committerJaroslav Kysela <perex@suse.cz>
Sat, 23 Sep 2006 08:46:22 +0000 (10:46 +0200)
This patch adds LFE mixer controls for laptops with a stac9200 and a mono
speaker pin with amplifier.

Signed-off-by: Richard Fish <bigfish@asmallpond.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
sound/pci/hda/patch_sigmatel.c

index 87169032be1f2008daaf4df30b263854aa4a1b89..bcbbe111ab951a4b704796d922fac5e2be94704c 100644 (file)
@@ -1223,6 +1223,66 @@ static int stac9200_auto_create_hp_ctls(struct hda_codec *codec,
        return 0;
 }
 
+/* add playback controls for LFE output */
+static int stac9200_auto_create_lfe_ctls(struct hda_codec *codec,
+                                       struct auto_pin_cfg *cfg)
+{
+       struct sigmatel_spec *spec = codec->spec;
+       int err;
+       hda_nid_t lfe_pin = 0x0;
+       int i;
+
+       /*
+        * search speaker outs and line outs for a mono speaker pin
+        * with an amp.  If one is found, add LFE controls
+        * for it.
+        */
+       for (i = 0; i < spec->autocfg.speaker_outs && lfe_pin == 0x0; i++) {
+               hda_nid_t pin = spec->autocfg.speaker_pins[i];
+               unsigned long wcaps = get_wcaps(codec, pin);
+               wcaps &= (AC_WCAP_STEREO | AC_WCAP_OUT_AMP);
+               if (wcaps == AC_WCAP_OUT_AMP)
+                       /* found a mono speaker with an amp, must be lfe */
+                       lfe_pin = pin;
+       }
+
+       /* if speaker_outs is 0, then speakers may be in line_outs */
+       if (lfe_pin == 0 && spec->autocfg.speaker_outs == 0) {
+               for (i = 0; i < spec->autocfg.line_outs && lfe_pin == 0x0; i++) {
+                       hda_nid_t pin = spec->autocfg.line_out_pins[i];
+                       unsigned long cfg;
+                       cfg = snd_hda_codec_read(codec, pin, 0,
+                                                AC_VERB_GET_CONFIG_DEFAULT,
+                                                0x00);
+                       if (get_defcfg_device(cfg) == AC_JACK_SPEAKER) {
+                               unsigned long wcaps = get_wcaps(codec, pin);
+                               wcaps &= (AC_WCAP_STEREO | AC_WCAP_OUT_AMP);
+                               if (wcaps == AC_WCAP_OUT_AMP)
+                                       /* found a mono speaker with an amp,
+                                          must be lfe */
+                                       lfe_pin = pin;
+                       }
+               }
+       }
+
+       if (lfe_pin) {
+               err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL,
+                                          "LFE Playback Volume",
+                                          HDA_COMPOSE_AMP_VAL(lfe_pin, 1, 0,
+                                                              HDA_OUTPUT));
+               if (err < 0)
+                       return err;
+               err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE,
+                                          "LFE Playback Switch",
+                                          HDA_COMPOSE_AMP_VAL(lfe_pin, 1, 0,
+                                                              HDA_OUTPUT));
+               if (err < 0)
+                       return err;
+       }
+
+       return 0;
+}
+
 static int stac9200_parse_auto_config(struct hda_codec *codec)
 {
        struct sigmatel_spec *spec = codec->spec;
@@ -1237,6 +1297,9 @@ static int stac9200_parse_auto_config(struct hda_codec *codec)
        if ((err = stac9200_auto_create_hp_ctls(codec, &spec->autocfg)) < 0)
                return err;
 
+       if ((err = stac9200_auto_create_lfe_ctls(codec, &spec->autocfg)) < 0)
+               return err;
+
        if (spec->autocfg.dig_out_pin)
                spec->multiout.dig_out_nid = 0x05;
        if (spec->autocfg.dig_in_pin)