V4L/DVB (8135): WRITE_RPS1() converts to le32 itself

... but two ancient drivers had not noticed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index dfe03cb42671b99570fd161e443cba8962501d7f..865c4596b7b73d4e7abb333a336d6113fdccced8 100644 (file)
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2402,18 +2402,18 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
                saa7146_write(dev, MC1, MASK_29);
                /* RPS1 timeout disable */
                saa7146_write(dev, RPS_TOV1, 0);
-               WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
-               WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-               WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-               WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+               WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
+               WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+               WRITE_RPS1(GPIO3_MSK);
+               WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
 #if RPS_IRQ
                /* issue RPS1 interrupt to increment counter */
-               WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+               WRITE_RPS1(CMD_INTERRUPT);
 #endif
-               WRITE_RPS1(cpu_to_le32(CMD_STOP));
+               WRITE_RPS1(CMD_STOP);
                /* Jump to begin of RPS program as safety measure               (p37) */
-               WRITE_RPS1(cpu_to_le32(CMD_JUMP));
-               WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+               WRITE_RPS1(CMD_JUMP);
+               WRITE_RPS1(dev->d_rps1.dma_handle);
 
 #if RPS_IRQ
                /* set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
@@ -2526,28 +2526,28 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
                count = 0;
 
                /* Wait Source Line Counter Threshold                           (p36) */
-               WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+               WRITE_RPS1(CMD_PAUSE | EVT_HS);
                /* Set GPIO3=1                                                  (p42) */
-               WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-               WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-               WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+               WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+               WRITE_RPS1(GPIO3_MSK);
+               WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
 #if RPS_IRQ
                /* issue RPS1 interrupt */
-               WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+               WRITE_RPS1(CMD_INTERRUPT);
 #endif
                /* Wait reset Source Line Counter Threshold                     (p36) */
-               WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+               WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
                /* Set GPIO3=0                                                  (p42) */
-               WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-               WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-               WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+               WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+               WRITE_RPS1(GPIO3_MSK);
+               WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
 #if RPS_IRQ
                /* issue RPS1 interrupt */
-               WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+               WRITE_RPS1(CMD_INTERRUPT);
 #endif
                /* Jump to begin of RPS program                                 (p37) */
-               WRITE_RPS1(cpu_to_le32(CMD_JUMP));
-               WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+               WRITE_RPS1(CMD_JUMP);
+               WRITE_RPS1(dev->d_rps1.dma_handle);
 
                /* Fix VSYNC level */
                saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);

diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 9a155396d6acd1648d45f255d5faf04ef8be9720..39bd0a20f53a41f4d8cf51ecdc41644abb039994 100644 (file)
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -431,22 +431,22 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
        // in budget patch GPIO3 is connected to VSYNC_B
        count = 0;
 #if 0
-       WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
-         MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
+       WRITE_RPS1(CMD_UPLOAD |
+         MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 );
 #endif
-       WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
-       WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-       WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-       WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+       WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
+       WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+       WRITE_RPS1(GPIO3_MSK);
+       WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
 #if RPS_IRQ
        // issue RPS1 interrupt to increment counter
-       WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+       WRITE_RPS1(CMD_INTERRUPT);
        // at least a NOP is neede between two interrupts
-       WRITE_RPS1(cpu_to_le32(CMD_NOP));
+       WRITE_RPS1(CMD_NOP);
        // interrupt again
-       WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+       WRITE_RPS1(CMD_INTERRUPT);
 #endif
-       WRITE_RPS1(cpu_to_le32(CMD_STOP));
+       WRITE_RPS1(CMD_STOP);
 
 #if RPS_IRQ
        // set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
@@ -558,28 +558,28 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 
 
        // Wait Source Line Counter Threshold                           (p36)
-       WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+       WRITE_RPS1(CMD_PAUSE | EVT_HS);
        // Set GPIO3=1                                                  (p42)
-       WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-       WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-       WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+       WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+       WRITE_RPS1(GPIO3_MSK);
+       WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
 #if RPS_IRQ
        // issue RPS1 interrupt
-       WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+       WRITE_RPS1(CMD_INTERRUPT);
 #endif
        // Wait reset Source Line Counter Threshold                     (p36)
-       WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+       WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
        // Set GPIO3=0                                                  (p42)
-       WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-       WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-       WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+       WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+       WRITE_RPS1(GPIO3_MSK);
+       WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
 #if RPS_IRQ
        // issue RPS1 interrupt
-       WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+       WRITE_RPS1(CMD_INTERRUPT);
 #endif
        // Jump to begin of RPS program                                 (p37)
-       WRITE_RPS1(cpu_to_le32(CMD_JUMP));
-       WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+       WRITE_RPS1(CMD_JUMP);
+       WRITE_RPS1(dev->d_rps1.dma_handle);
 
        // Fix VSYNC level
        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);