struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_waiting_insert: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
list_add(&srb->list, &dcb->srb_waiting_list);
}
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_waiting_append: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
list_add_tail(&srb->list, &dcb->srb_waiting_list);
}
static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_going_append: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
list_add_tail(&srb->list, &dcb->srb_going_list);
}
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
dprintkdbg(DBG_0, "srb_going_remove: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
list_for_each_entry_safe(i, tmp, &dcb->srb_going_list, list)
if (i == srb) {
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
dprintkdbg(DBG_0, "srb_waiting_remove: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
list_for_each_entry_safe(i, tmp, &dcb->srb_waiting_list, list)
if (i == srb) {
{
dprintkdbg(DBG_0,
"srb_going_to_waiting_move: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
list_move(&srb->list, &dcb->srb_waiting_list);
}
{
dprintkdbg(DBG_0,
"srb_waiting_to_going_move: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
list_move(&srb->list, &dcb->srb_going_list);
}
int nseg;
enum dma_data_direction dir = cmd->sc_data_direction;
dprintkdbg(DBG_0, "build_srb: (pid#%li) <%02i-%i>\n",
- cmd->pid, dcb->target_id, dcb->target_lun);
+ cmd->serial_number, dcb->target_id, dcb->target_lun);
srb->dcb = dcb;
srb->cmd = cmd;
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
dprintkdbg(DBG_0, "queue_command: (pid#%li) <%02i-%i> cmnd=0x%02x\n",
- cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
/* Assume BAD_TARGET; will be cleared later */
cmd->result = DID_BAD_TARGET << 16;
/* process immediately */
send_srb(acb, srb);
}
- dprintkdbg(DBG_1, "queue_command: (pid#%li) done\n", cmd->pid);
+ dprintkdbg(DBG_1, "queue_command: (pid#%li) done\n", cmd->serial_number);
return 0;
complete:
else
dprintkl(KERN_INFO, "dump: srb=%p cmd=%p (pid#%li) "
"cmnd=0x%02x <%02i-%i>\n",
- srb, srb->cmd, srb->cmd->pid,
+ srb, srb->cmd, srb->cmd->serial_number,
srb->cmd->cmnd[0], srb->cmd->device->id,
srb->cmd->device->lun);
printk(" sglist=%p cnt=%i idx=%i len=%zu\n",
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
dprintkl(KERN_INFO,
"eh_bus_reset: (pid#%li) target=<%02i-%i> cmd=%p\n",
- cmd->pid, cmd->device->id, cmd->device->lun, cmd);
+ cmd->serial_number, cmd->device->id, cmd->device->lun, cmd);
if (timer_pending(&acb->waiting_timer))
del_timer(&acb->waiting_timer);
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
dprintkl(KERN_INFO, "eh_abort: (pid#%li) target=<%02i-%i> cmd=%p\n",
- cmd->pid, cmd->device->id, cmd->device->lun, cmd);
+ cmd->serial_number, cmd->device->id, cmd->device->lun, cmd);
dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
if (!dcb) {
u8 s_stat, scsicommand, i, identify_message;
u8 *ptr;
dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
srb->tag_number = TAG_NONE; /* acb->tag_max_num: had error read in eeprom */
#if 1
if (s_stat & 0x20 /* s_stat2 & 0x02000 */ ) {
dprintkdbg(DBG_KG, "start_scsi: (pid#%li) BUSY %02x %04x\n",
- srb->cmd->pid, s_stat, s_stat2);
+ srb->cmd->serial_number, s_stat, s_stat2);
/*
* Try anyway?
*
if (acb->active_dcb) {
dprintkl(KERN_DEBUG, "start_scsi: (pid#%li) Attempt to start a"
"command while another command (pid#%li) is active.",
- srb->cmd->pid,
+ srb->cmd->serial_number,
acb->active_dcb->active_srb ?
- acb->active_dcb->active_srb->cmd->pid : 0);
+ acb->active_dcb->active_srb->cmd->serial_number : 0);
return 1;
}
if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
dprintkdbg(DBG_KG, "start_scsi: (pid#%li) Failed (busy)\n",
- srb->cmd->pid);
+ srb->cmd->serial_number);
return 1;
}
/* Allow starting of SCSI commands half a second before we allow the mid-level
if (tag_number >= dcb->max_command) {
dprintkl(KERN_WARNING, "start_scsi: (pid#%li) "
"Out of tags target=<%02i-%i>)\n",
- srb->cmd->pid, srb->cmd->device->id,
+ srb->cmd->serial_number, srb->cmd->device->id,
srb->cmd->device->lun);
srb->state = SRB_READY;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
/*polling:*/
/* Send CDB ..command block ......... */
dprintkdbg(DBG_KG, "start_scsi: (pid#%li) <%02i-%i> cmnd=0x%02x tag=%i\n",
- srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun,
+ srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun,
srb->cmd->cmnd[0], srb->tag_number);
if (srb->flag & AUTO_REQSENSE) {
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
* : Let's process it first!
*/
dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> Failed - busy\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun);
srb->state = SRB_READY;
free_tag(dcb, srb);
srb->msg_count = 0;
static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "msgout_phase0: (pid#%li)\n", srb->cmd->pid);
+ dprintkdbg(DBG_0, "msgout_phase0: (pid#%li)\n", srb->cmd->serial_number);
if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
{
u16 i;
u8 *ptr;
- dprintkdbg(DBG_0, "msgout_phase1: (pid#%li)\n", srb->cmd->pid);
+ dprintkdbg(DBG_0, "msgout_phase1: (pid#%li)\n", srb->cmd->serial_number);
clear_fifo(acb, "msgout_phase1");
if (!(srb->state & SRB_MSGOUT)) {
srb->state |= SRB_MSGOUT;
dprintkl(KERN_DEBUG,
"msgout_phase1: (pid#%li) Phase unexpected\n",
- srb->cmd->pid); /* So what ? */
+ srb->cmd->serial_number); /* So what ? */
}
if (!srb->msg_count) {
dprintkdbg(DBG_0, "msgout_phase1: (pid#%li) NOP msg\n",
- srb->cmd->pid);
+ srb->cmd->serial_number);
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_NOP);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "command_phase0: (pid#%li)\n", srb->cmd->pid);
+ dprintkdbg(DBG_0, "command_phase0: (pid#%li)\n", srb->cmd->serial_number);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
}
struct DeviceCtlBlk *dcb;
u8 *ptr;
u16 i;
- dprintkdbg(DBG_0, "command_phase1: (pid#%li)\n", srb->cmd->pid);
+ dprintkdbg(DBG_0, "command_phase1: (pid#%li)\n", srb->cmd->serial_number);
clear_fifo(acb, "command_phase1");
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
u16 scsi_status = *pscsi_status;
u32 d_left_counter = 0;
dprintkdbg(DBG_0, "data_out_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
+ srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
/*
* KG: We need to drain the buffers before we draw any conclusions!
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "data_out_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
+ srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
clear_fifo(acb, "data_out_phase1");
/* do prepare before transfer when data out phase */
data_io_transfer(acb, srb, XFERDATAOUT);
u16 scsi_status = *pscsi_status;
dprintkdbg(DBG_0, "data_in_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
+ srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
/*
* KG: DataIn is much more tricky than DataOut. When the device is finished
if (scsi_status & PARITYERROR) {
dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) "
- "Parity Error\n", srb->cmd->pid);
+ "Parity Error\n", srb->cmd->serial_number);
srb->status |= PARITY_ERROR;
}
/*
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "data_in_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
+ srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
data_io_transfer(acb, srb, XFERDATAIN);
}
u8 bval;
dprintkdbg(DBG_0,
"data_io_transfer: (pid#%li) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
- srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun,
+ srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun,
((io_dir & DMACMD_DIR) ? 'r' : 'w'),
srb->total_xfer_length, srb->sg_index, srb->sg_count);
if (srb == acb->tmp_srb)
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "status_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
+ srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
srb->target_status = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
srb->end_message = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); /* get message */
srb->state = SRB_COMPLETED;
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "status_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
+ srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
srb->state = SRB_STATUS;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
struct ScsiReqBlk *srb = NULL;
struct ScsiReqBlk *i;
dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) tag=%i srb=%p\n",
- srb->cmd->pid, tag, srb);
+ srb->cmd->serial_number, tag, srb);
if (!(dcb->tag_mask & (1 << tag)))
dprintkl(KERN_DEBUG,
goto mingx0;
dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) <%02i-%i>\n",
- srb->cmd->pid, srb->dcb->target_id, srb->dcb->target_lun);
+ srb->cmd->serial_number, srb->dcb->target_id, srb->dcb->target_lun);
if (dcb->flag & ABORT_DEV_) {
/*srb->state = SRB_ABORT_SENT; */
enable_msgout_abort(acb, srb);
u16 *pscsi_status)
{
struct DeviceCtlBlk *dcb = acb->active_dcb;
- dprintkdbg(DBG_0, "msgin_phase0: (pid#%li)\n", srb->cmd->pid);
+ dprintkdbg(DBG_0, "msgin_phase0: (pid#%li)\n", srb->cmd->serial_number);
srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
*/
dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
"SAVE POINTER rem=%i Ignore\n",
- srb->cmd->pid, srb->total_xfer_length);
+ srb->cmd->serial_number, srb->total_xfer_length);
break;
case RESTORE_POINTERS:
case ABORT:
dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
"<%02i-%i> ABORT msg\n",
- srb->cmd->pid, dcb->target_id,
+ srb->cmd->serial_number, dcb->target_id,
dcb->target_lun);
dcb->flag |= ABORT_DEV_;
enable_msgout_abort(acb, srb);
static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "msgin_phase1: (pid#%li)\n", srb->cmd->pid);
+ dprintkdbg(DBG_0, "msgin_phase1: (pid#%li)\n", srb->cmd->serial_number);
clear_fifo(acb, "msgin_phase1");
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
if (!(srb->state & SRB_MSGIN)) {
}
srb = dcb->active_srb;
acb->active_dcb = NULL;
- dprintkdbg(DBG_0, "disconnect: (pid#%li)\n", srb->cmd->pid);
+ dprintkdbg(DBG_0, "disconnect: (pid#%li)\n", srb->cmd->serial_number);
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
clear_fifo(acb, "disconnect");
srb->state = SRB_READY;
dprintkl(KERN_DEBUG,
"disconnect: (pid#%li) Unexpected\n",
- srb->cmd->pid);
+ srb->cmd->serial_number);
srb->target_status = SCSI_STAT_SEL_TIMEOUT;
goto disc1;
} else {
/* Normal selection timeout */
dprintkdbg(DBG_KG, "disconnect: (pid#%li) "
- "<%02i-%i> SelTO\n", srb->cmd->pid,
+ "<%02i-%i> SelTO\n", srb->cmd->serial_number,
dcb->target_id, dcb->target_lun);
if (srb->retry_count++ > DC395x_MAX_RETRIES
|| acb->scan_devices) {
srb_going_to_waiting_move(dcb, srb);
dprintkdbg(DBG_KG,
"disconnect: (pid#%li) Retry\n",
- srb->cmd->pid);
+ srb->cmd->serial_number);
waiting_set_timer(acb, HZ / 20);
}
} else if (srb->state & SRB_DISCONNECT) {
if (!acb->scan_devices) {
dprintkdbg(DBG_KG, "reselect: (pid#%li) <%02i-%i> "
"Arb lost but Resel win rsel=%i stat=0x%04x\n",
- srb->cmd->pid, dcb->target_id,
+ srb->cmd->serial_number, dcb->target_id,
dcb->target_lun, rsel_tar_lun_id,
DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
arblostflag = 1;
enum dma_data_direction dir = cmd->sc_data_direction;
int ckc_only = 1;
- dprintkdbg(DBG_1, "srb_done: (pid#%li) <%02i-%i>\n", srb->cmd->pid,
+ dprintkdbg(DBG_1, "srb_done: (pid#%li) <%02i-%i>\n", srb->cmd->serial_number,
srb->cmd->device->id, srb->cmd->device->lun);
dprintkdbg(DBG_SG, "srb_done: srb=%p sg=%i(%i/%i) buf=%p\n",
srb, scsi_sg_count(cmd), srb->sg_index, srb->sg_count,
if (srb->total_xfer_length)
dprintkdbg(DBG_KG, "srb_done: (pid#%li) <%02i-%i> "
"cmnd=0x%02x Missed %i bytes\n",
- cmd->pid, cmd->device->id, cmd->device->lun,
+ cmd->serial_number, cmd->device->id, cmd->device->lun,
cmd->cmnd[0], srb->total_xfer_length);
}
dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
else {
dprintkdbg(DBG_0, "srb_done: (pid#%li) done result=0x%08x\n",
- cmd->pid, cmd->result);
+ cmd->serial_number, cmd->result);
srb_free_insert(acb, srb);
}
pci_unmap_srb(acb, srb);
p = srb->cmd;
dir = p->sc_data_direction;
result = MK_RES(0, did_flag, 0, 0);
- printk("G:%li(%02i-%i) ", p->pid,
+ printk("G:%li(%02i-%i) ", p->serial_number,
p->device->id, p->device->lun);
srb_going_remove(dcb, srb);
free_tag(dcb, srb);
p = srb->cmd;
result = MK_RES(0, did_flag, 0, 0);
- printk("W:%li<%02i-%i>", p->pid, p->device->id,
+ printk("W:%li<%02i-%i>", p->serial_number, p->device->id,
p->device->lun);
srb_waiting_remove(dcb, srb);
srb_free_insert(acb, srb);
{
struct scsi_cmnd *cmd = srb->cmd;
dprintkdbg(DBG_1, "request_sense: (pid#%li) <%02i-%i>\n",
- cmd->pid, cmd->device->id, cmd->device->lun);
+ cmd->serial_number, cmd->device->id, cmd->device->lun);
srb->flag |= AUTO_REQSENSE;
srb->adapter_status = 0;
if (start_scsi(acb, dcb, srb)) { /* Should only happen, if sb. else grabs the bus */
dprintkl(KERN_DEBUG,
"request_sense: (pid#%li) failed <%02i-%i>\n",
- srb->cmd->pid, dcb->target_id, dcb->target_lun);
+ srb->cmd->serial_number, dcb->target_id, dcb->target_lun);
srb_going_to_waiting_move(dcb, srb);
waiting_set_timer(acb, HZ / 100);
}
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_waiting_list));
list_for_each_entry(srb, &dcb->srb_waiting_list, list)
- SPRINTF(" %li", srb->cmd->pid);
+ SPRINTF(" %li", srb->cmd->serial_number);
if (!list_empty(&dcb->srb_going_list))
SPRINTF("\nDCB (%02i-%i): Going : %i:",
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_going_list));
list_for_each_entry(srb, &dcb->srb_going_list, list)
- SPRINTF(" %li", srb->cmd->pid);
+ SPRINTF(" %li", srb->cmd->serial_number);
if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
SPRINTF("\n");
}
if (SCpnt->host_scribble)
panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
- ha->board_name, SCpnt->pid, SCpnt);
+ ha->board_name, SCpnt->serial_number, SCpnt);
/* i is the mailbox number, look for the first free mailbox
starting from last_cp_used */
if (do_trace)
scmd_printk(KERN_INFO, SCpnt,
- "qcomm, mbox %d, pid %ld.\n", i, SCpnt->pid);
+ "qcomm, mbox %d, pid %ld.\n", i, SCpnt->serial_number);
cpp->reqsen = 1;
cpp->dispri = 1;
unmap_dma(i, ha);
SCpnt->host_scribble = NULL;
scmd_printk(KERN_INFO, SCpnt,
- "qcomm, pid %ld, adapter busy.\n", SCpnt->pid);
+ "qcomm, pid %ld, adapter busy.\n", SCpnt->serial_number);
return 1;
}
if (SCarg->host_scribble == NULL) {
scmd_printk(KERN_INFO, SCarg,
- "abort, pid %ld inactive.\n", SCarg->pid);
+ "abort, pid %ld inactive.\n", SCarg->serial_number);
return SUCCESS;
}
i = *(unsigned int *)SCarg->host_scribble;
scmd_printk(KERN_WARNING, SCarg,
- "abort, mbox %d, pid %ld.\n", i, SCarg->pid);
+ "abort, mbox %d, pid %ld.\n", i, SCarg->serial_number);
if (i >= shost->can_queue)
panic("%s: abort, invalid SCarg->host_scribble.\n", ha->board_name);
SCarg->host_scribble = NULL;
ha->cp_stat[i] = FREE;
printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
- ha->board_name, i, SCarg->pid);
+ ha->board_name, i, SCarg->serial_number);
SCarg->scsi_done(SCarg);
return SUCCESS;
}
struct hostdata *ha = (struct hostdata *)shost->hostdata;
scmd_printk(KERN_INFO, SCarg,
- "reset, enter, pid %ld.\n", SCarg->pid);
+ "reset, enter, pid %ld.\n", SCarg->serial_number);
spin_lock_irq(shost->host_lock);
if (SCarg->host_scribble == NULL)
- printk("%s: reset, pid %ld inactive.\n", ha->board_name, SCarg->pid);
+ printk("%s: reset, pid %ld inactive.\n", ha->board_name, SCarg->serial_number);
if (ha->in_reset) {
printk("%s: reset, exit, already in reset.\n", ha->board_name);
if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
ha->cp_stat[i] = ABORTING;
printk("%s: reset, mbox %d aborting, pid %ld.\n",
- ha->board_name, i, SCpnt->pid);
+ ha->board_name, i, SCpnt->serial_number);
}
else {
ha->cp_stat[i] = IN_RESET;
printk("%s: reset, mbox %d in reset, pid %ld.\n",
- ha->board_name, i, SCpnt->pid);
+ ha->board_name, i, SCpnt->serial_number);
}
if (SCpnt->host_scribble == NULL)
printk
("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
- ha->board_name, i, SCpnt->pid);
+ ha->board_name, i, SCpnt->serial_number);
}
else if (ha->cp_stat[i] == ABORTING) {
printk
("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
- ha->board_name, i, SCpnt->pid);
+ ha->board_name, i, SCpnt->serial_number);
}
else
do_trace = 0;
if (arg_done)
- printk("%s: reset, exit, pid %ld done.\n", ha->board_name, SCarg->pid);
+ printk("%s: reset, exit, pid %ld done.\n", ha->board_name, SCarg->serial_number);
else
printk("%s: reset, exit.\n", ha->board_name);
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
ll[n] = SCpnt->request->nr_sectors;
- pl[n] = SCpnt->pid;
+ pl[n] = SCpnt->serial_number;
if (!n)
continue;
"%s pid %ld mb %d fc %d nr %d sec %ld ns %ld"
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"),
- SCpnt->pid, k, flushcount,
+ SCpnt->serial_number, k, flushcount,
n_ready, SCpnt->request->sector,
SCpnt->request->nr_sectors, cursec, YESNO(s),
YESNO(r), YESNO(rev), YESNO(input_only),
"%s, pid %ld, mbox %d, adapter"
" busy, will abort.\n",
(ihdlr ? "ihdlr" : "qcomm"),
- SCpnt->pid, k);
+ SCpnt->serial_number, k);
ha->cp_stat[k] = ABORTING;
continue;
}
if (SCpnt->host_scribble == NULL)
panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", ha->board_name,
- i, SCpnt->pid, SCpnt);
+ i, SCpnt->serial_number, SCpnt);
if (*(unsigned int *)SCpnt->host_scribble != i)
panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
- ha->board_name, i, SCpnt->pid,
+ ha->board_name, i, SCpnt->serial_number,
*(unsigned int *)SCpnt->host_scribble);
sync_dma(i, ha);
"target_status 0x%x, sense key 0x%x.\n",
ha->board_name,
SCpnt->device->channel, SCpnt->device->id,
- SCpnt->device->lun, SCpnt->pid,
+ SCpnt->device->lun, SCpnt->serial_number,
spp->target_status, SCpnt->sense_buffer[2]);
ha->target_to[SCpnt->device->id][SCpnt->device->channel] = 0;
- if (ha->last_retried_pid == SCpnt->pid)
+ if (ha->last_retried_pid == SCpnt->serial_number)
ha->retries = 0;
break;
#endif
ha->retries++;
- ha->last_retried_pid = SCpnt->pid;
+ ha->last_retried_pid = SCpnt->serial_number;
} else
status = DID_ERROR << 16;
scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"
" pid %ld, reg 0x%x, count %d.\n",
i, spp->adapter_status, spp->target_status,
- SCpnt->pid, reg, ha->iocount);
+ SCpnt->serial_number, reg, ha->iocount);
unmap_dma(i, ha);
DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
"eata_pio_queue pid %ld, y %d\n",
- cmd->pid, y));
+ cmd->serial_number, y));
cmd->scsi_done = (void *) done;
cmd->result = DID_BUS_BUSY << 16;
scmd_printk(KERN_NOTICE, cmd,
"eata_pio_queue pid %ld, HBA busy, "
- "returning DID_BUS_BUSY, done.\n", cmd->pid);
+ "returning DID_BUS_BUSY, done.\n", cmd->serial_number);
done(cmd);
cp->status = FREE;
return 0;
DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
"Queued base %#.4lx pid: %ld "
- "slot %d irq %d\n", sh->base, cmd->pid, y, sh->irq));
+ "slot %d irq %d\n", sh->base, cmd->serial_number, y, sh->irq));
return 0;
}
DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
"eata_pio_abort called pid: %ld\n",
- cmd->pid));
+ cmd->serial_number));
while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
if (--loop == 0) {
DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
"eata_pio_reset called pid:%ld\n",
- cmd->pid));
+ cmd->serial_number));
spin_lock_irq(host->host_lock);
sp = HD(cmd)->ccb[x].cmd;
HD(cmd)->ccb[x].status = RESET;
- printk(KERN_WARNING "eata_pio_reset: slot %d in reset, pid %ld.\n", x, sp->pid);
+ printk(KERN_WARNING "eata_pio_reset: slot %d in reset, pid %ld.\n", x, sp->serial_number);
if (sp == NULL)
panic("eata_pio_reset: slot %d, sp==NULL.\n", x);
instance = cmd->device->host;
hostdata = (struct IN2000_hostdata *) instance->hostdata;
- DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x-%ld(", cmd->cmnd[0], cmd->pid))
+ DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x-%ld(", cmd->cmnd[0], cmd->serial_number))
/* Set up a few fields in the Scsi_Cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
in2000_execute(cmd->device->host);
- DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->pid))
+ DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
return 0;
}
* to search the input_Q again...
*/
- DB(DB_EXECUTE, printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->pid))
+ DB(DB_EXECUTE, printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
}
case CSR_XFER_DONE | PHS_COMMAND:
case CSR_UNEXP | PHS_COMMAND:
case CSR_SRV_REQ | PHS_COMMAND:
- DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->pid))
+ DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
transfer_pio(cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR, hostdata);
hostdata->state = S_CONNECTED;
break;
switch (msg) {
case COMMAND_COMPLETE:
- DB(DB_INTR, printk("CCMP-%ld", cmd->pid))
+ DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK);
hostdata->state = S_PRE_CMP_DISC;
break;
write_3393(hostdata, WD_SOURCE_ID, SRCID_ER);
if (phs == 0x60) {
- DB(DB_INTR, printk("SX-DONE-%ld", cmd->pid))
+ DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
cmd->SCp.Message = COMMAND_COMPLETE;
lun = read_3393(hostdata, WD_TARGET_LUN);
DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
in2000_execute(instance);
} else {
- printk("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs, cmd->pid);
+ printk("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs, cmd->serial_number);
}
break;
spin_unlock_irqrestore(instance->host_lock, flags);
return IRQ_HANDLED;
}
- DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->pid))
+ DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
hostdata->connected = NULL;
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
*/
write_3393(hostdata, WD_SOURCE_ID, SRCID_ER);
- DB(DB_INTR, printk("DISC-%ld", cmd->pid))
+ DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
if (cmd == NULL) {
printk(" - Already disconnected! ");
hostdata->state = S_UNCONNECTED;
} else
hostdata->state = S_CONNECTED;
- DB(DB_INTR, printk("-%ld", cmd->pid))
+ DB(DB_INTR, printk("-%ld", cmd->serial_number))
break;
default:
prev->host_scribble = cmd->host_scribble;
cmd->host_scribble = NULL;
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "scsi%d: Abort - removing command %ld from input_Q. ", instance->host_no, cmd->pid);
+ printk(KERN_WARNING "scsi%d: Abort - removing command %ld from input_Q. ", instance->host_no, cmd->serial_number);
cmd->scsi_done(cmd);
return SUCCESS;
}
if (hostdata->connected == cmd) {
- printk(KERN_WARNING "scsi%d: Aborting connected command %ld - ", instance->host_no, cmd->pid);
+ printk(KERN_WARNING "scsi%d: Aborting connected command %ld - ", instance->host_no, cmd->serial_number);
printk("sending wd33c93 ABORT command - ");
write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED);
strcat(bp, "\nconnected: ");
if (hd->connected) {
cmd = (Scsi_Cmnd *) hd->connected;
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
}
}
strcat(bp, "\ninput_Q: ");
cmd = (Scsi_Cmnd *) hd->input_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (Scsi_Cmnd *) cmd->host_scribble;
}
strcat(bp, "\ndisconnected_Q:");
cmd = (Scsi_Cmnd *) hd->disconnected_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (Scsi_Cmnd *) cmd->host_scribble;
}
unsigned long flags;
struct scsi_cmnd *done_list;
-#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
- printk("ncr53c8xx_abort: pid=%lu serial_number=%ld\n",
- cmd->pid, cmd->serial_number);
-#else
- printk("ncr53c8xx_abort: command pid %lu\n", cmd->pid);
-#endif
+ printk("ncr53c8xx_abort: command pid %lu\n", cmd->serial_number);
NCR_LOCK_NCB(np, flags);
} */
printk(" tag=%d, transfersize=0x%x \n",
cmd->tag, cmd->transfersize);
- printk(" Pid=%li, SP=0x%p\n", cmd->pid, CMD_SP(cmd));
+ printk(" Pid=%li, SP=0x%p\n", cmd->serial_number, CMD_SP(cmd));
printk(" underflow size = 0x%x, direction=0x%x\n",
cmd->underflow, cmd->sc_data_direction);
}
#endif
/*
- * Assign a serial number and pid to the request for error recovery
+ * Assign a serial number to the request for error recovery
* and debugging purposes. Protected by the Host_Lock of host.
*/
static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
cmd->serial_number = host->cmd_serial_number++;
if (cmd->serial_number == 0)
cmd->serial_number = host->cmd_serial_number++;
-
- cmd->pid = host->cmd_pid++;
- if (cmd->pid == 0)
- cmd->pid = host->cmd_pid++;
}
/*
init_timer(&scmd->eh_timeout);
- /*
- * Sometimes the command can get back into the timer chain,
- * so use the pid as an identifier.
- */
- scmd->pid = 0;
-
spin_lock_irqsave(shost->host_lock, flags);
shost->tmf_in_progress = 1;
spin_unlock_irqrestore(shost->host_lock, flags);
pDCB->TagMask |= 1 << tag[1];
pSRB->TagNumber = tag[1];
DC390_write8(ScsiFifo, tag[1]);
- DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for Cmd %li (SRB %p), block tag %02x\n", scmd->pid, pSRB, tag[1]));
+ DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for Cmd %li (SRB %p), block tag %02x\n", scmd->serial_number, pSRB, tag[1]));
cmd = SEL_W_ATN3;
} else {
/* No TagQ */
//no_tag:
- DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for Cmd %li (SRB %p), No TagQ\n", disc_allowed ? "" : "o", scmd->pid, pSRB));
+ DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for Cmd %li (SRB %p), No TagQ\n", disc_allowed ? "" : "o", scmd->serial_number, pSRB));
}
pSRB->SRBState = SRB_START_;
{
dc390_freetag (pDCB, pSRB);
DEBUG0(printk ("DC390: Interrupt during Start SCSI (pid %li, target %02i-%02i)\n",
- scmd->pid, scmd->device->id, scmd->device->lun));
+ scmd->serial_number, scmd->device->id, scmd->device->lun));
pSRB->SRBState = SRB_READY;
//DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
pACB->SelLost++;
status = pSRB->TargetStatus;
DEBUG0(printk (" SRBdone (%02x,%08x), SRB %p, pid %li\n", status, pcmd->result,\
- pSRB, pcmd->pid));
+ pSRB, pcmd->serial_number));
if(pSRB->SRBFlag & AUTO_REQSENSE)
{ /* Last command was a Request Sense */
pSRB->SRBFlag &= ~AUTO_REQSENSE;
} else {
SET_RES_DRV(pcmd->result, DRIVER_SENSE);
//pSRB->ScsiCmdLen = (u8) (pSRB->Segment1[0] >> 8);
- DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->pid, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+ DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
pSRB->TotalXferredLen = 0;
SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
}
else if (status == SAM_STAT_TASK_SET_FULL)
{
scsi_track_queue_full(pcmd->device, pDCB->GoingSRBCnt - 1);
- DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->pid, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+ DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
pSRB->TotalXferredLen = 0;
SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
}
/* Add to free list */
dc390_Free_insert (pACB, pSRB);
- DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->pid));
+ DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->serial_number));
pcmd->scsi_done (pcmd);
return;
struct dc390_dcb *pDCB = (struct dc390_dcb*) cmd->device->hostdata;
scmd_printk(KERN_WARNING, cmd,
- "DC390: Abort command (pid %li)\n", cmd->pid);
+ "DC390: Abort command (pid %li)\n", cmd->serial_number);
/* abort() is too stupid for already sent commands at the moment.
* If it's called we are in trouble anyway, so let's dump some info
dc390_dumpinfo(pACB, pDCB, NULL);
pDCB->DCBFlag |= ABORT_DEV_;
- printk(KERN_INFO "DC390: Aborted pid %li\n", cmd->pid);
+ printk(KERN_INFO "DC390: Aborted pid %li\n", cmd->serial_number);
return FAILED;
}
if (SCpnt->host_scribble)
panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
- BN(j), SCpnt->pid, SCpnt);
+ BN(j), SCpnt->serial_number, SCpnt);
/* i is the mailbox number, look for the first free mailbox
starting from last_cp_used */
if (do_trace) printk("%s: qcomm, mbox %d, target %d.%d:%d, pid %ld.\n",
BN(j), i, SCpnt->device->channel, SCpnt->device->id,
- SCpnt->device->lun, SCpnt->pid);
+ SCpnt->device->lun, SCpnt->serial_number);
cpp->opcode = OP_SCSI;
cpp->channel = SCpnt->device->channel;
unmap_dma(i, j);
SCpnt->host_scribble = NULL;
scmd_printk(KERN_INFO, SCpnt,
- "qcomm, pid %ld, adapter busy.\n", SCpnt->pid);
+ "qcomm, pid %ld, adapter busy.\n", SCpnt->serial_number);
return 1;
}
if (SCarg->host_scribble == NULL) {
scmd_printk(KERN_INFO, SCarg, "abort, pid %ld inactive.\n",
- SCarg->pid);
+ SCarg->serial_number);
return SUCCESS;
}
i = *(unsigned int *)SCarg->host_scribble;
scmd_printk(KERN_INFO, SCarg, "abort, mbox %d, pid %ld.\n",
- i, SCarg->pid);
+ i, SCarg->serial_number);
if (i >= sh[j]->can_queue)
panic("%s: abort, invalid SCarg->host_scribble.\n", BN(j));
SCarg->host_scribble = NULL;
HD(j)->cp_stat[i] = FREE;
printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
- BN(j), i, SCarg->pid);
+ BN(j), i, SCarg->serial_number);
SCarg->scsi_done(SCarg);
return SUCCESS;
}
struct scsi_cmnd *SCpnt;
j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
- scmd_printk(KERN_INFO, SCarg, "reset, enter, pid %ld.\n", SCarg->pid);
+ scmd_printk(KERN_INFO, SCarg, "reset, enter, pid %ld.\n", SCarg->serial_number);
spin_lock_irq(sh[j]->host_lock);
if (SCarg->host_scribble == NULL)
- printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->pid);
+ printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->serial_number);
if (HD(j)->in_reset) {
printk("%s: reset, exit, already in reset.\n", BN(j));
if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
HD(j)->cp_stat[i] = ABORTING;
printk("%s: reset, mbox %d aborting, pid %ld.\n",
- BN(j), i, SCpnt->pid);
+ BN(j), i, SCpnt->serial_number);
}
else {
HD(j)->cp_stat[i] = IN_RESET;
printk("%s: reset, mbox %d in reset, pid %ld.\n",
- BN(j), i, SCpnt->pid);
+ BN(j), i, SCpnt->serial_number);
}
if (SCpnt->host_scribble == NULL)
HD(j)->cp_stat[i] = LOCKED;
printk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
- BN(j), i, SCpnt->pid);
+ BN(j), i, SCpnt->serial_number);
}
else if (HD(j)->cp_stat[i] == ABORTING) {
HD(j)->cp_stat[i] = FREE;
printk("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
- BN(j), i, SCpnt->pid);
+ BN(j), i, SCpnt->serial_number);
}
else
HD(j)->in_reset = FALSE;
do_trace = FALSE;
- if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->pid);
+ if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->serial_number);
else printk("%s: reset, exit.\n", BN(j));
spin_unlock_irq(sh[j]->host_lock);
if (!input_only) for (n = 0; n < n_ready; n++) {
k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
- ll[n] = SCpnt->request->nr_sectors; pl[n] = SCpnt->pid;
+ ll[n] = SCpnt->request->nr_sectors; pl[n] = SCpnt->serial_number;
if (!n) continue;
printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
- SCpnt->lun, SCpnt->pid, k, flushcount, n_ready,
+ SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready,
SCpnt->request->sector, SCpnt->request->nr_sectors, cursec,
YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
YESNO(overlap), cpp->xdir);
scmd_printk(KERN_INFO, SCpnt,
"%s, pid %ld, mbox %d, adapter"
" busy, will abort.\n", (ihdlr ? "ihdlr" : "qcomm"),
- SCpnt->pid, k);
+ SCpnt->serial_number, k);
HD(j)->cp_stat[k] = ABORTING;
continue;
}
if (SCpnt->host_scribble == NULL)
panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", BN(j), i,
- SCpnt->pid, SCpnt);
+ SCpnt->serial_number, SCpnt);
if (*(unsigned int *)SCpnt->host_scribble != i)
panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
- BN(j), i, SCpnt->pid, *(unsigned int *)SCpnt->host_scribble);
+ BN(j), i, SCpnt->serial_number, *(unsigned int *)SCpnt->host_scribble);
sync_dma(i, j);
(SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
scmd_printk(KERN_INFO, SCpnt,
"ihdlr, pid %ld, target_status 0x%x, sense key 0x%x.\n",
- SCpnt->pid, spp->target_status,
+ SCpnt->serial_number, spp->target_status,
SCpnt->sense_buffer[2]);
HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)] = 0;
- if (HD(j)->last_retried_pid == SCpnt->pid) HD(j)->retries = 0;
+ if (HD(j)->last_retried_pid == SCpnt->serial_number) HD(j)->retries = 0;
break;
case ASST: /* Selection Time Out */
#endif
HD(j)->retries++;
- HD(j)->last_retried_pid = SCpnt->pid;
+ HD(j)->last_retried_pid = SCpnt->serial_number;
}
else
status = DID_ERROR << 16;
#endif
scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"\
" pid %ld, reg 0x%x, count %d.\n",
- i, spp->adapter_status, spp->target_status, SCpnt->pid,
+ i, spp->adapter_status, spp->target_status, SCpnt->serial_number,
reg, HD(j)->iocount);
unmap_dma(i, j);
hostdata = (struct WD33C93_hostdata *) cmd->device->host->hostdata;
DB(DB_QUEUE_COMMAND,
- printk("Q-%d-%02x-%ld( ", cmd->device->id, cmd->cmnd[0], cmd->pid))
+ printk("Q-%d-%02x-%ld( ", cmd->device->id, cmd->cmnd[0], cmd->serial_number))
/* Set up a few fields in the scsi_cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
wd33c93_execute(cmd->device->host);
- DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->pid))
+ DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
spin_unlock_irq(&hostdata->lock);
return 0;
*/
DB(DB_EXECUTE,
- printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->pid))
+ printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
}
static void
case CSR_XFER_DONE | PHS_COMMAND:
case CSR_UNEXP | PHS_COMMAND:
case CSR_SRV_REQ | PHS_COMMAND:
- DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->pid))
+ DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
transfer_pio(regs, cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR,
hostdata);
hostdata->state = S_CONNECTED;
switch (msg) {
case COMMAND_COMPLETE:
- DB(DB_INTR, printk("CCMP-%ld", cmd->pid))
+ DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
hostdata->state = S_PRE_CMP_DISC;
break;
write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
if (phs == 0x60) {
- DB(DB_INTR, printk("SX-DONE-%ld", cmd->pid))
+ DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
cmd->SCp.Message = COMMAND_COMPLETE;
lun = read_wd33c93(regs, WD_TARGET_LUN);
DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
} else {
printk
("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---",
- asr, sr, phs, cmd->pid);
+ asr, sr, phs, cmd->serial_number);
spin_unlock_irqrestore(&hostdata->lock, flags);
}
break;
spin_unlock_irqrestore(&hostdata->lock, flags);
return;
}
- DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->pid))
+ DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
hostdata->connected = NULL;
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
*/
write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
- DB(DB_INTR, printk("DISC-%ld", cmd->pid))
+ DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
if (cmd == NULL) {
printk(" - Already disconnected! ");
hostdata->state = S_UNCONNECTED;
} else
hostdata->state = S_CONNECTED;
- DB(DB_INTR, printk("-%ld", cmd->pid))
+ DB(DB_INTR, printk("-%ld", cmd->serial_number))
spin_unlock_irqrestore(&hostdata->lock, flags);
break;
cmd->result = DID_ABORT << 16;
printk
("scsi%d: Abort - removing command %ld from input_Q. ",
- instance->host_no, cmd->pid);
+ instance->host_no, cmd->serial_number);
enable_irq(cmd->device->host->irq);
cmd->scsi_done(cmd);
return SUCCESS;
unsigned long timeout;
printk("scsi%d: Aborting connected command %ld - ",
- instance->host_no, cmd->pid);
+ instance->host_no, cmd->serial_number);
printk("stopping DMA - ");
if (hostdata->dma == D_DMA_RUNNING) {
if (tmp == cmd) {
printk
("scsi%d: Abort - command %ld found on disconnected_Q - ",
- instance->host_no, cmd->pid);
+ instance->host_no, cmd->serial_number);
printk("Abort SNOOZE. ");
enable_irq(cmd->device->host->irq);
return FAILED;
if (hd->connected) {
cmd = (struct scsi_cmnd *) hd->connected;
sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
}
}
cmd = (struct scsi_cmnd *) hd->input_Q;
while (cmd) {
sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
cmd = (struct scsi_cmnd *) hd->disconnected_Q;
while (cmd) {
sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
* A SCSI Command is assigned a nonzero serial_number before passed
* to the driver's queue command function. The serial_number is
* cleared when scsi_done is entered indicating that the command
- * has been completed. It currently doesn't have much use other
- * than printk's. Some lldd's use this number for other purposes.
- * It's almost certain that such usages are either incorrect or
- * meaningless. Please kill all usages other than printk's. Also,
- * as this number is always identical to ->pid, please convert
- * printk's to use ->pid, so that we can kill this field.
+ * has been completed. It is a bug for LLDDs to use this number
+ * for purposes other than printk (and even that is only useful
+ * for debugging).
*/
unsigned long serial_number;
+
/*
* This is set to jiffies as it was when the command was first
* allocated. It is used to time how long the command has
int result; /* Status code from lower level driver */
unsigned char tag; /* SCSI-II queued command tag */
- unsigned long pid; /* Process ID, starts at 0. Unique per host. */
};
extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
* Used to assign serial numbers to the cmds.
* Protected by the host lock.
*/
- unsigned long cmd_serial_number, cmd_pid;
+ unsigned long cmd_serial_number;
unsigned active_mode:2;
unsigned unchecked_isa_dma:1;