* IRQ's are in fact implemented a bit like signal handlers for the kernel.
* Naturally it's not a 1:1 relation, but there are similarities.
*/
-#include <linux/config.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
-#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-/*
- * Maximum IRQ count. Currently, this is arbitary. However, it should
- * not be set too low to prevent false triggering. Conversely, if it
- * is set too high, then you could miss a stuck IRQ.
- *
- * Maybe we ought to set a timer and re-enable the IRQ at a later time?
- */
-#define MAX_IRQ_CNT 100000
-
-static int noirqdebug;
-static volatile unsigned long irq_err_count;
-static DEFINE_SPINLOCK(irq_controller_lock);
-static LIST_HEAD(irq_pending);
-
-struct irqdesc irq_desc[NR_IRQS];
-void (*init_arch_irq)(void) __initdata = NULL;
-
/*
* No architecture-specific irq_finish function defined in arm/arch/irqs.h.
*/
#define irq_finish(irq) do { } while (0)
#endif
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
-
-irqreturn_t no_action(int irq, void *dev_id, struct pt_regs *regs)
-{
- return IRQ_NONE;
-}
-
-void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
- irq_err_count += 1;
- printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
-}
-
-static struct irqchip bad_chip = {
- .ack = dummy_mask_unmask_irq,
- .mask = dummy_mask_unmask_irq,
- .unmask = dummy_mask_unmask_irq,
-};
-
-static struct irqdesc bad_irq_desc = {
- .chip = &bad_chip,
- .handle = do_bad_IRQ,
- .pend = LIST_HEAD_INIT(bad_irq_desc.pend),
- .disable_depth = 1,
-};
-
-#ifdef CONFIG_SMP
-void synchronize_irq(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
-
- while (desc->running)
- barrier();
-}
-EXPORT_SYMBOL(synchronize_irq);
-
-#define smp_set_running(desc) do { desc->running = 1; } while (0)
-#define smp_clear_running(desc) do { desc->running = 0; } while (0)
-#else
-#define smp_set_running(desc) do { } while (0)
-#define smp_clear_running(desc) do { } while (0)
-#endif
-
-/**
- * disable_irq_nosync - disable an irq without waiting
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Enables and disables
- * are nested. We do this lazily.
- *
- * This function may be called from IRQ context.
- */
-void disable_irq_nosync(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- desc->disable_depth++;
- list_del_init(&desc->pend);
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(disable_irq_nosync);
-
-/**
- * disable_irq - disable an irq and wait for completion
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Enables and disables
- * are nested. This functions waits for any pending IRQ
- * handlers for this interrupt to complete before returning.
- * If you use this function while holding a resource the IRQ
- * handler may need you will deadlock.
- *
- * This function may be called - with care - from IRQ context.
- */
-void disable_irq(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
-
- disable_irq_nosync(irq);
- if (desc->action)
- synchronize_irq(irq);
-}
-EXPORT_SYMBOL(disable_irq);
-
-/**
- * enable_irq - enable interrupt handling on an irq
- * @irq: Interrupt to enable
- *
- * Re-enables the processing of interrupts on this IRQ line.
- * Note that this may call the interrupt handler, so you may
- * get unexpected results if you hold IRQs disabled.
- *
- * This function may be called from IRQ context.
- */
-void enable_irq(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- if (unlikely(!desc->disable_depth)) {
- printk("enable_irq(%u) unbalanced from %p\n", irq,
- __builtin_return_address(0));
- } else if (!--desc->disable_depth) {
- desc->probing = 0;
- desc->chip->unmask(irq);
-
- /*
- * If the interrupt is waiting to be processed,
- * try to re-run it. We can't directly run it
- * from here since the caller might be in an
- * interrupt-protected region.
- */
- if (desc->pending && list_empty(&desc->pend)) {
- desc->pending = 0;
- if (!desc->chip->retrigger ||
- desc->chip->retrigger(irq))
- list_add(&desc->pend, &irq_pending);
- }
- }
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(enable_irq);
-
-/*
- * Enable wake on selected irq
- */
-void enable_irq_wake(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- if (desc->chip->set_wake)
- desc->chip->set_wake(irq, 1);
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(enable_irq_wake);
-
-void disable_irq_wake(unsigned int irq)
-{
- struct irqdesc *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- if (desc->chip->set_wake)
- desc->chip->set_wake(irq, 0);
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(disable_irq_wake);
+void (*init_arch_irq)(void) __initdata = NULL;
+unsigned long irq_err_count;
int show_interrupts(struct seq_file *p, void *v)
{
}
if (i < NR_IRQS) {
- spin_lock_irqsave(&irq_controller_lock, flags);
- action = irq_desc[i].action;
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
if (!action)
goto unlock;
seq_printf(p, "%3d: ", i);
for_each_present_cpu(cpu)
seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+ seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
seq_printf(p, " %s", action->name);
for (action = action->next; action; action = action->next)
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
unlock:
- spin_unlock_irqrestore(&irq_controller_lock, flags);
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
#ifdef CONFIG_ARCH_ACORN
show_fiq_list(p, v);
return 0;
}
-/*
- * IRQ lock detection.
- *
- * Hopefully, this should get us out of a few locked situations.
- * However, it may take a while for this to happen, since we need
- * a large number if IRQs to appear in the same jiffie with the
- * same instruction pointer (or within 2 instructions).
- */
-static int check_irq_lock(struct irqdesc *desc, int irq, struct pt_regs *regs)
-{
- unsigned long instr_ptr = instruction_pointer(regs);
-
- if (desc->lck_jif == jiffies &&
- desc->lck_pc >= instr_ptr && desc->lck_pc < instr_ptr + 8) {
- desc->lck_cnt += 1;
-
- if (desc->lck_cnt > MAX_IRQ_CNT) {
- printk(KERN_ERR "IRQ LOCK: IRQ%d is locking the system, disabled\n", irq);
- return 1;
- }
- } else {
- desc->lck_cnt = 0;
- desc->lck_pc = instruction_pointer(regs);
- desc->lck_jif = jiffies;
- }
- return 0;
-}
-
-static void
-report_bad_irq(unsigned int irq, struct pt_regs *regs, struct irqdesc *desc, int ret)
-{
- static int count = 100;
- struct irqaction *action;
-
- if (noirqdebug)
- return;
-
- if (ret != IRQ_HANDLED && ret != IRQ_NONE) {
- if (!count)
- return;
- count--;
- printk("irq%u: bogus retval mask %x\n", irq, ret);
- } else {
- desc->irqs_unhandled++;
- if (desc->irqs_unhandled <= 99900)
- return;
- desc->irqs_unhandled = 0;
- printk("irq%u: nobody cared\n", irq);
- }
- show_regs(regs);
- dump_stack();
- printk(KERN_ERR "handlers:");
- action = desc->action;
- do {
- printk("\n" KERN_ERR "[<%p>]", action->handler);
- print_symbol(" (%s)", (unsigned long)action->handler);
- action = action->next;
- } while (action);
- printk("\n");
-}
-
-static int
-__do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
-{
- unsigned int status;
- int ret, retval = 0;
-
- spin_unlock(&irq_controller_lock);
-
-#ifdef CONFIG_NO_IDLE_HZ
- if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) {
- spin_lock(&system_timer->dyn_tick->lock);
- if (system_timer->dyn_tick->state & DYN_TICK_ENABLED)
- system_timer->dyn_tick->handler(irq, 0, regs);
- spin_unlock(&system_timer->dyn_tick->lock);
- }
-#endif
-
- if (!(action->flags & SA_INTERRUPT))
- local_irq_enable();
-
- status = 0;
- do {
- ret = action->handler(irq, action->dev_id, regs);
- if (ret == IRQ_HANDLED)
- status |= action->flags;
- retval |= ret;
- action = action->next;
- } while (action);
-
- if (status & SA_SAMPLE_RANDOM)
- add_interrupt_randomness(irq);
-
- spin_lock_irq(&irq_controller_lock);
-
- return retval;
-}
-
-/*
- * This is for software-decoded IRQs. The caller is expected to
- * handle the ack, clear, mask and unmask issues.
- */
-void
-do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
- struct irqaction *action;
- const unsigned int cpu = smp_processor_id();
-
- desc->triggered = 1;
-
- kstat_cpu(cpu).irqs[irq]++;
-
- smp_set_running(desc);
-
- action = desc->action;
- if (action) {
- int ret = __do_irq(irq, action, regs);
- if (ret != IRQ_HANDLED)
- report_bad_irq(irq, regs, desc, ret);
- }
-
- smp_clear_running(desc);
-}
-
-/*
- * Most edge-triggered IRQ implementations seem to take a broken
- * approach to this. Hence the complexity.
- */
-void
-do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
- const unsigned int cpu = smp_processor_id();
-
- desc->triggered = 1;
-
- /*
- * If we're currently running this IRQ, or its disabled,
- * we shouldn't process the IRQ. Instead, turn on the
- * hardware masks.
- */
- if (unlikely(desc->running || desc->disable_depth))
- goto running;
-
- /*
- * Acknowledge and clear the IRQ, but don't mask it.
- */
- desc->chip->ack(irq);
-
- /*
- * Mark the IRQ currently in progress.
- */
- desc->running = 1;
-
- kstat_cpu(cpu).irqs[irq]++;
-
- do {
- struct irqaction *action;
-
- action = desc->action;
- if (!action)
- break;
-
- if (desc->pending && !desc->disable_depth) {
- desc->pending = 0;
- desc->chip->unmask(irq);
- }
-
- __do_irq(irq, action, regs);
- } while (desc->pending && !desc->disable_depth);
-
- desc->running = 0;
-
- /*
- * If we were disabled or freed, shut down the handler.
- */
- if (likely(desc->action && !check_irq_lock(desc, irq, regs)))
- return;
-
- running:
- /*
- * We got another IRQ while this one was masked or
- * currently running. Delay it.
- */
- desc->pending = 1;
- desc->chip->mask(irq);
- desc->chip->ack(irq);
-}
-
-/*
- * Level-based IRQ handler. Nice and simple.
- */
-void
-do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
- struct irqaction *action;
- const unsigned int cpu = smp_processor_id();
-
- desc->triggered = 1;
-
- /*
- * Acknowledge, clear _AND_ disable the interrupt.
- */
- desc->chip->ack(irq);
-
- if (likely(!desc->disable_depth)) {
- kstat_cpu(cpu).irqs[irq]++;
-
- smp_set_running(desc);
-
- /*
- * Return with this interrupt masked if no action
- */
- action = desc->action;
- if (action) {
- int ret = __do_irq(irq, desc->action, regs);
-
- if (ret != IRQ_HANDLED)
- report_bad_irq(irq, regs, desc, ret);
-
- if (likely(!desc->disable_depth &&
- !check_irq_lock(desc, irq, regs)))
- desc->chip->unmask(irq);
- }
-
- smp_clear_running(desc);
- }
-}
-
-static void do_pending_irqs(struct pt_regs *regs)
-{
- struct list_head head, *l, *n;
-
- do {
- struct irqdesc *desc;
-
- /*
- * First, take the pending interrupts off the list.
- * The act of calling the handlers may add some IRQs
- * back onto the list.
- */
- head = irq_pending;
- INIT_LIST_HEAD(&irq_pending);
- head.next->prev = &head;
- head.prev->next = &head;
-
- /*
- * Now run each entry. We must delete it from our
- * list before calling the handler.
- */
- list_for_each_safe(l, n, &head) {
- desc = list_entry(l, struct irqdesc, pend);
- list_del_init(&desc->pend);
- desc_handle_irq(desc - irq_desc, desc, regs);
- }
-
- /*
- * The list must be empty.
- */
- BUG_ON(!list_empty(&head));
- } while (!list_empty(&irq_pending));
-}
+/* Handle bad interrupts */
+static struct irq_desc bad_irq_desc = {
+ .handle_irq = handle_bad_irq,
+ .lock = SPIN_LOCK_UNLOCKED
+};
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
desc = &bad_irq_desc;
irq_enter();
- spin_lock(&irq_controller_lock);
- desc_handle_irq(irq, desc, regs);
- /*
- * Now re-run any pending interrupts.
- */
- if (!list_empty(&irq_pending))
- do_pending_irqs(regs);
+ desc_handle_irq(irq, desc, regs);
+ /* AT91 specific workaround */
irq_finish(irq);
- spin_unlock(&irq_controller_lock);
irq_exit();
}
-void __set_irq_handler(unsigned int irq, irq_handler_t handle, int is_chained)
-{
- struct irqdesc *desc;
- unsigned long flags;
-
- if (irq >= NR_IRQS) {
- printk(KERN_ERR "Trying to install handler for IRQ%d\n", irq);
- return;
- }
-
- if (handle == NULL)
- handle = do_bad_IRQ;
-
- desc = irq_desc + irq;
-
- if (is_chained && desc->chip == &bad_chip)
- printk(KERN_WARNING "Trying to install chained handler for IRQ%d\n", irq);
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- if (handle == do_bad_IRQ) {
- desc->chip->mask(irq);
- desc->chip->ack(irq);
- desc->disable_depth = 1;
- }
- desc->handle = handle;
- if (handle != do_bad_IRQ && is_chained) {
- desc->valid = 0;
- desc->probe_ok = 0;
- desc->disable_depth = 0;
- desc->chip->unmask(irq);
- }
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-void set_irq_chip(unsigned int irq, struct irqchip *chip)
-{
- struct irqdesc *desc;
- unsigned long flags;
-
- if (irq >= NR_IRQS) {
- printk(KERN_ERR "Trying to install chip for IRQ%d\n", irq);
- return;
- }
-
- if (chip == NULL)
- chip = &bad_chip;
-
- desc = irq_desc + irq;
- spin_lock_irqsave(&irq_controller_lock, flags);
- desc->chip = chip;
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-int set_irq_type(unsigned int irq, unsigned int type)
-{
- struct irqdesc *desc;
- unsigned long flags;
- int ret = -ENXIO;
-
- if (irq >= NR_IRQS) {
- printk(KERN_ERR "Trying to set irq type for IRQ%d\n", irq);
- return -ENODEV;
- }
-
- desc = irq_desc + irq;
- if (desc->chip->set_type) {
- spin_lock_irqsave(&irq_controller_lock, flags);
- ret = desc->chip->set_type(irq, type);
- spin_unlock_irqrestore(&irq_controller_lock, flags);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(set_irq_type);
-
void set_irq_flags(unsigned int irq, unsigned int iflags)
{
struct irqdesc *desc;
}
desc = irq_desc + irq;
- spin_lock_irqsave(&irq_controller_lock, flags);
- desc->valid = (iflags & IRQF_VALID) != 0;
- desc->probe_ok = (iflags & IRQF_PROBE) != 0;
- desc->noautoenable = (iflags & IRQF_NOAUTOEN) != 0;
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-int setup_irq(unsigned int irq, struct irqaction *new)
-{
- int shared = 0;
- struct irqaction *old, **p;
- unsigned long flags;
- struct irqdesc *desc;
-
- /*
- * Some drivers like serial.c use request_irq() heavily,
- * so we have to be careful not to interfere with a
- * running system.
- */
- if (new->flags & SA_SAMPLE_RANDOM) {
- /*
- * This function might sleep, we want to call it first,
- * outside of the atomic block.
- * Yes, this might clear the entropy pool if the wrong
- * driver is attempted to be loaded, without actually
- * installing a new handler, but is this really a problem,
- * only the sysadmin is able to do this.
- */
- rand_initialize_irq(irq);
- }
-
- /*
- * The following block of code has to be executed atomically
- */
- desc = irq_desc + irq;
- spin_lock_irqsave(&irq_controller_lock, flags);
- p = &desc->action;
- if ((old = *p) != NULL) {
- /*
- * Can't share interrupts unless both agree to and are
- * the same type.
- */
- if (!(old->flags & new->flags & SA_SHIRQ) ||
- (~old->flags & new->flags) & SA_TRIGGER_MASK) {
- spin_unlock_irqrestore(&irq_controller_lock, flags);
- return -EBUSY;
- }
-
- /* add new interrupt at end of irq queue */
- do {
- p = &old->next;
- old = *p;
- } while (old);
- shared = 1;
- }
-
- *p = new;
-
- if (!shared) {
- desc->probing = 0;
- desc->running = 0;
- desc->pending = 0;
- desc->disable_depth = 1;
-
- if (new->flags & SA_TRIGGER_MASK &&
- desc->chip->set_type) {
- unsigned int type = new->flags & SA_TRIGGER_MASK;
- desc->chip->set_type(irq, type);
- }
-
- if (!desc->noautoenable) {
- desc->disable_depth = 0;
- desc->chip->unmask(irq);
- }
- }
-
- spin_unlock_irqrestore(&irq_controller_lock, flags);
- return 0;
-}
-
-/**
- * request_irq - allocate an interrupt line
- * @irq: Interrupt line to allocate
- * @handler: Function to be called when the IRQ occurs
- * @irqflags: Interrupt type flags
- * @devname: An ascii name for the claiming device
- * @dev_id: A cookie passed back to the handler function
- *
- * This call allocates interrupt resources and enables the
- * interrupt line and IRQ handling. From the point this
- * call is made your handler function may be invoked. Since
- * your handler function must clear any interrupt the board
- * raises, you must take care both to initialise your hardware
- * and to set up the interrupt handler in the right order.
- *
- * Dev_id must be globally unique. Normally the address of the
- * device data structure is used as the cookie. Since the handler
- * receives this value it makes sense to use it.
- *
- * If your interrupt is shared you must pass a non NULL dev_id
- * as this is required when freeing the interrupt.
- *
- * Flags:
- *
- * SA_SHIRQ Interrupt is shared
- *
- * SA_INTERRUPT Disable local interrupts while processing
- *
- * SA_SAMPLE_RANDOM The interrupt can be used for entropy
- *
- */
-int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
- unsigned long irq_flags, const char * devname, void *dev_id)
-{
- unsigned long retval;
- struct irqaction *action;
-
- if (irq >= NR_IRQS || !irq_desc[irq].valid || !handler ||
- (irq_flags & SA_SHIRQ && !dev_id))
- return -EINVAL;
-
- action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
- if (!action)
- return -ENOMEM;
-
- action->handler = handler;
- action->flags = irq_flags;
- cpus_clear(action->mask);
- action->name = devname;
- action->next = NULL;
- action->dev_id = dev_id;
-
- retval = setup_irq(irq, action);
-
- if (retval)
- kfree(action);
- return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- * free_irq - free an interrupt
- * @irq: Interrupt line to free
- * @dev_id: Device identity to free
- *
- * Remove an interrupt handler. The handler is removed and if the
- * interrupt line is no longer in use by any driver it is disabled.
- * On a shared IRQ the caller must ensure the interrupt is disabled
- * on the card it drives before calling this function.
- *
- * This function must not be called from interrupt context.
- */
-void free_irq(unsigned int irq, void *dev_id)
-{
- struct irqaction * action, **p;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !irq_desc[irq].valid) {
- printk(KERN_ERR "Trying to free IRQ%d\n",irq);
- dump_stack();
- return;
- }
-
- spin_lock_irqsave(&irq_controller_lock, flags);
- for (p = &irq_desc[irq].action; (action = *p) != NULL; p = &action->next) {
- if (action->dev_id != dev_id)
- continue;
-
- /* Found it - now free it */
- *p = action->next;
- break;
- }
- spin_unlock_irqrestore(&irq_controller_lock, flags);
-
- if (!action) {
- printk(KERN_ERR "Trying to free free IRQ%d\n",irq);
- dump_stack();
- } else {
- synchronize_irq(irq);
- kfree(action);
- }
-}
-
-EXPORT_SYMBOL(free_irq);
-
-static DECLARE_MUTEX(probe_sem);
-
-/* Start the interrupt probing. Unlike other architectures,
- * we don't return a mask of interrupts from probe_irq_on,
- * but return the number of interrupts enabled for the probe.
- * The interrupts which have been enabled for probing is
- * instead recorded in the irq_desc structure.
- */
-unsigned long probe_irq_on(void)
-{
- unsigned int i, irqs = 0;
- unsigned long delay;
-
- down(&probe_sem);
-
- /*
- * first snaffle up any unassigned but
- * probe-able interrupts
- */
- spin_lock_irq(&irq_controller_lock);
- for (i = 0; i < NR_IRQS; i++) {
- if (!irq_desc[i].probe_ok || irq_desc[i].action)
- continue;
-
- irq_desc[i].probing = 1;
- irq_desc[i].triggered = 0;
- if (irq_desc[i].chip->set_type)
- irq_desc[i].chip->set_type(i, IRQT_PROBE);
- irq_desc[i].chip->unmask(i);
- irqs += 1;
- }
- spin_unlock_irq(&irq_controller_lock);
-
- /*
- * wait for spurious interrupts to mask themselves out again
- */
- for (delay = jiffies + HZ/10; time_before(jiffies, delay); )
- /* min 100ms delay */;
-
- /*
- * now filter out any obviously spurious interrupts
- */
- spin_lock_irq(&irq_controller_lock);
- for (i = 0; i < NR_IRQS; i++) {
- if (irq_desc[i].probing && irq_desc[i].triggered) {
- irq_desc[i].probing = 0;
- irqs -= 1;
- }
- }
- spin_unlock_irq(&irq_controller_lock);
-
- return irqs;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-unsigned int probe_irq_mask(unsigned long irqs)
-{
- unsigned int mask = 0, i;
-
- spin_lock_irq(&irq_controller_lock);
- for (i = 0; i < 16 && i < NR_IRQS; i++)
- if (irq_desc[i].probing && irq_desc[i].triggered)
- mask |= 1 << i;
- spin_unlock_irq(&irq_controller_lock);
-
- up(&probe_sem);
-
- return mask;
-}
-EXPORT_SYMBOL(probe_irq_mask);
-
-/*
- * Possible return values:
- * >= 0 - interrupt number
- * -1 - no interrupt/many interrupts
- */
-int probe_irq_off(unsigned long irqs)
-{
- unsigned int i;
- int irq_found = NO_IRQ;
-
- /*
- * look at the interrupts, and find exactly one
- * that we were probing has been triggered
- */
- spin_lock_irq(&irq_controller_lock);
- for (i = 0; i < NR_IRQS; i++) {
- if (irq_desc[i].probing &&
- irq_desc[i].triggered) {
- if (irq_found != NO_IRQ) {
- irq_found = NO_IRQ;
- goto out;
- }
- irq_found = i;
- }
- }
-
- if (irq_found == -1)
- irq_found = NO_IRQ;
-out:
- spin_unlock_irq(&irq_controller_lock);
-
- up(&probe_sem);
-
- return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-#ifdef CONFIG_SMP
-static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
-{
- pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
-
- spin_lock_irq(&irq_controller_lock);
- desc->cpu = cpu;
- desc->chip->set_cpu(desc, irq, cpu);
- spin_unlock_irq(&irq_controller_lock);
-}
-
-#ifdef CONFIG_PROC_FS
-static int
-irq_affinity_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- struct irqdesc *desc = irq_desc + ((int)data);
- int len = cpumask_scnprintf(page, count, desc->affinity);
-
- if (count - len < 2)
- return -EINVAL;
- page[len++] = '\n';
- page[len] = '\0';
-
- return len;
-}
-
-static int
-irq_affinity_write_proc(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- unsigned int irq = (unsigned int)data;
- struct irqdesc *desc = irq_desc + irq;
- cpumask_t affinity, tmp;
- int ret = -EIO;
-
- if (!desc->chip->set_cpu)
- goto out;
-
- ret = cpumask_parse(buffer, count, affinity);
- if (ret)
- goto out;
-
- cpus_and(tmp, affinity, cpu_online_map);
- if (cpus_empty(tmp)) {
- ret = -EINVAL;
- goto out;
- }
-
- desc->affinity = affinity;
- route_irq(desc, irq, first_cpu(tmp));
- ret = count;
-
- out:
- return ret;
-}
-#endif
-#endif
-
-void __init init_irq_proc(void)
-{
-#if defined(CONFIG_SMP) && defined(CONFIG_PROC_FS)
- struct proc_dir_entry *dir;
- int irq;
-
- dir = proc_mkdir("irq", NULL);
- if (!dir)
- return;
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- struct proc_dir_entry *entry;
- struct irqdesc *desc;
- char name[16];
-
- desc = irq_desc + irq;
- memset(name, 0, sizeof(name));
- snprintf(name, sizeof(name) - 1, "%u", irq);
-
- desc->procdir = proc_mkdir(name, dir);
- if (!desc->procdir)
- continue;
-
- entry = create_proc_entry("smp_affinity", 0600, desc->procdir);
- if (entry) {
- entry->nlink = 1;
- entry->data = (void *)irq;
- entry->read_proc = irq_affinity_read_proc;
- entry->write_proc = irq_affinity_write_proc;
- }
- }
-#endif
+ spin_lock_irqsave(&desc->lock, flags);
+ desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ if (iflags & IRQF_VALID)
+ desc->status &= ~IRQ_NOREQUEST;
+ if (iflags & IRQF_PROBE)
+ desc->status &= ~IRQ_NOPROBE;
+ if (!(iflags & IRQF_NOAUTOEN))
+ desc->status &= ~IRQ_NOAUTOEN;
+ spin_unlock_irqrestore(&desc->lock, flags);
}
void __init init_IRQ(void)
{
- struct irqdesc *desc;
int irq;
+ for (irq = 0; irq < NR_IRQS; irq++)
+ irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_DELAYED_DISABLE |
+ IRQ_NOPROBE;
+
#ifdef CONFIG_SMP
bad_irq_desc.affinity = CPU_MASK_ALL;
bad_irq_desc.cpu = smp_processor_id();
#endif
-
- for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
- *desc = bad_irq_desc;
- INIT_LIST_HEAD(&desc->pend);
- }
-
init_arch_irq();
}
-static int __init noirqdebug_setup(char *str)
+#ifdef CONFIG_HOTPLUG_CPU
+
+static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
{
- noirqdebug = 1;
- return 1;
-}
+ pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
-__setup("noirqdebug", noirqdebug_setup);
+ spin_lock_irq(&desc->lock);
+ desc->chip->set_affinity(irq, cpumask_of_cpu(cpu));
+ spin_unlock_irq(&desc->lock);
+}
-#ifdef CONFIG_HOTPLUG_CPU
/*
* The CPU has been marked offline. Migrate IRQs off this CPU. If
* the affinity settings do not allow other CPUs, force them onto any
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/mtd/mtd.h>
static struct irqaction omap2_gp_timer_irq = {
.name = "gp timer",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = omap2_gp_timer_interrupt,
};
#include <asm/arch/clock.h>
-LIST_HEAD(clocks);
-DEFINE_SPINLOCK(clockfw_lock);
+static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
static struct clk_functions *arch_clock;
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
.text
-/* Prototype: int __arch_copy_to_user_dsp_2b(void *to, const char *from)
+/* Prototype: int __copy_to_user_dsp_2b(void *to, const char *from)
* Purpose : copy 2 bytes to user memory from kernel(DSP) memory
- * escaping from unexpected byte swap using __arch_copy_to_user()
+ * escaping from unexpected byte swap using __copy_to_user()
* in OMAP architecture.
* Params : to - user memory
* : from - kernel(DSP) memory
* Returns : success = 0, failure = 2
*/
-ENTRY(__arch_copy_to_user_dsp_2b)
+ENTRY(__copy_to_user_dsp_2b)
stmfd sp!, {r4, lr}
ldrb r3, [r1], #1
ldrb r4, [r1], #1
USER( strbt r4, [r0], #1) @ May fault
USER( strbt r3, [r0], #1) @ May fault
mov r0, #0
- LOADREGS(fd,sp!,{r4, pc})
+ ldmfd sp!, {r4, pc}
.section .fixup,"ax"
.align 0
9001: mov r0, #2
- LOADREGS(fd,sp!, {r4, pc})
+ ldmfd sp!, {r4, pc}
.previous
-/* Prototype: unsigned long __arch_copy_from_user_dsp_2b(void *to, const void *from);
+/* Prototype: unsigned long __copy_from_user_dsp_2b(void *to, const void *from);
* Purpose : copy 2 bytes from user memory to kernel(DSP) memory
- * escaping from unexpected byte swap using __arch_copy_to_user()
+ * escaping from unexpected byte swap using __copy_to_user()
* in OMAP architecture.
* Params : to - kernel (DSP) memory
* : from - user memory
* Returns : success = 0, failure = 2
*/
-ENTRY(__arch_copy_from_user_dsp_2b)
+ENTRY(__copy_from_user_dsp_2b)
stmfd sp!, {r4, lr}
USER( ldrbt r3, [r1], #1) @ May fault
USER( ldrbt r4, [r1], #1) @ May fault
strb r4, [r0], #1
strb r3, [r0], #1
mov r0, #0
- LOADREGS(fd,sp!,{r4, pc})
+ ldmfd sp!, {r4, pc}
.section .fixup,"ax"
.align 0
9001: mov r3, #0
strh r3, [r0], #2
mov r0, #2
- LOADREGS(fd,sp!, {r4, pc})
+ ldmfd sp!, {r4, pc}
.previous
#define HAVE_ASM_COPY_FROM_USER_DSP_2B
#ifdef HAVE_ASM_COPY_FROM_USER_DSP_2B
-extern unsigned long __arch_copy_from_user_dsp_2b(void *to,
+extern unsigned long __copy_from_user_dsp_2b(void *to,
const void __user *from);
-extern unsigned long __arch_copy_to_user_dsp_2b(void __user *to,
+extern unsigned long __copy_to_user_dsp_2b(void __user *to,
const void *from);
#endif
{
unsigned short tmp;
- if (__arch_copy_from_user(&tmp, from, 2))
+ if (__copy_from_user(&tmp, from, 2))
return 2;
/* expecting compiler to generate "strh" instruction */
*((unsigned short *)to) = tmp;
/* dest not aligned -- copy 2 bytes */
if (((unsigned long)to & 2) && (n >= 2)) {
#ifdef HAVE_ASM_COPY_FROM_USER_DSP_2B
- if (__arch_copy_from_user_dsp_2b(to, from))
+ if (__copy_from_user_dsp_2b(to, from))
#else
if (copy_from_user_dsp_2b(to, from))
#endif
/* middle 4*n bytes */
last_n = n & 2;
n4 = n - last_n;
- if ((n = __arch_copy_from_user(to, from, n4)) != 0)
+ if ((n = __copy_from_user(to, from, n4)) != 0)
return n + last_n;
/* last 2 bytes */
if (last_n) {
to += n4;
from += n4;
#ifdef HAVE_ASM_COPY_FROM_USER_DSP_2B
- if (__arch_copy_from_user_dsp_2b(to, from))
+ if (__copy_from_user_dsp_2b(to, from))
#else
if (copy_from_user_dsp_2b(to, from))
#endif
* DARAM/SARAM with 4-byte alignment or
* external memory
*/
- n = __arch_copy_from_user(to, from, n);
+ n = __copy_from_user(to, from, n);
}
}
else /* security hole - plug it */
/* expecting compiler to generate "strh" instruction */
unsigned short tmp = *(unsigned short *)from;
- return __arch_copy_to_user(to, &tmp, 2);
+ return __copy_to_user(to, &tmp, 2);
}
#endif
/* dest not aligned -- copy 2 bytes */
if (((unsigned long)to & 2) && (n >= 2)) {
#ifdef HAVE_ASM_COPY_FROM_USER_DSP_2B
- if (__arch_copy_to_user_dsp_2b(to, from))
+ if (__copy_to_user_dsp_2b(to, from))
#else
if (copy_to_user_dsp_2b(to, from))
#endif
/* middle 4*n bytes */
last_n = n & 2;
n4 = n - last_n;
- if ((n = __arch_copy_to_user(to, from, n4)) != 0)
+ if ((n = __copy_to_user(to, from, n4)) != 0)
return n + last_n;
/* last 2 bytes */
if (last_n) {
to += n4;
from += n4;
#ifdef HAVE_ASM_COPY_FROM_USER_DSP_2B
- if (__arch_copy_to_user_dsp_2b(to, from))
+ if (__copy_to_user_dsp_2b(to, from))
#else
if (copy_to_user_dsp_2b(to, from))
#endif
* DARAM/SARAM with 4-byte alignment or
* external memory
*/
- n = __arch_copy_to_user(to, from, n);
+ n = __copy_to_user(to, from, n);
}
}
return n;
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
desc->chip->ack(irq);
- bank = (struct gpio_bank *) desc->data;
+ bank = get_irq_data(irq);
if (bank->method == METHOD_MPUIO)
isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
#ifdef CONFIG_ARCH_OMAP15XX
/* Don't run the handler if it's already running
* or was disabled lazely.
*/
- if (unlikely((d->disable_depth || d->running))) {
+ if (unlikely((d->depth ||
+ (d->status & IRQ_INPROGRESS)))) {
irq_mask = 1 <<
(gpio_irq - bank->virtual_irq_start);
/* The unmasking will be done by
* it's already running.
*/
_enable_gpio_irqbank(bank, irq_mask, 0);
- if (!d->disable_depth) {
+ if (!d->depth) {
/* Level triggered interrupts
* won't ever be reentered
*/
BUG_ON(level_mask & irq_mask);
- d->pending = 1;
+ d->status |= IRQ_PENDING;
}
continue;
}
- d->running = 1;
+
desc_handle_irq(gpio_irq, d, regs);
- d->running = 0;
- if (unlikely(d->pending && !d->disable_depth)) {
+
+ if (unlikely((d->status & IRQ_PENDING) && !d->depth)) {
irq_mask = 1 <<
(gpio_irq - bank->virtual_irq_start);
- d->pending = 0;
+ d->status &= ~IRQ_PENDING;
_enable_gpio_irqbank(bank, irq_mask, 1);
retrigger |= irq_mask;
}
_set_gpio_irqenable(bank, gpio, 1);
}
-static struct irqchip gpio_irq_chip = {
+static struct irq_chip gpio_irq_chip = {
+ .name = "GPIO",
.ack = gpio_ack_irq,
.mask = gpio_mask_irq,
.unmask = gpio_unmask_irq,
.set_wake = gpio_wake_enable,
};
-static struct irqchip mpuio_irq_chip = {
+static struct irq_chip mpuio_irq_chip = {
+ .name = "MPUIO",
.ack = mpuio_ack_irq,
.mask = mpuio_mask_irq,
- .unmask = mpuio_unmask_irq
+ .unmask = mpuio_unmask_irq
};
static int initialized;
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = omap_32k_timer_interrupt,
};
source "drivers/rtc/Kconfig"
+source "drivers/dma/Kconfig"
+
source "drivers/ssi/Kconfig"
endmenu
#include <linux/serial_reg.h>
#include <linux/skbuff.h>
#include <linux/firmware.h>
+#include <linux/irq.h>
#include <linux/timer.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/miscdevice.h>
#include <linux/poll.h>
#include <linux/fs.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/miscdevice.h>
#include <linux/poll.h>
#include <linux/fs.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
obj-$(CONFIG_TOSHIBA) += toshiba.o
obj-$(CONFIG_I8K) += i8k.o
obj-$(CONFIG_DS1620) += ds1620.o
-obj-$(CONFIG_HW_RANDOM) += hw_random.o
-obj-$(CONFIG_OMAP_RNG) += omap-rng.o
+obj-$(CONFIG_HW_RANDOM) += hw_random/
obj-$(CONFIG_FTAPE) += ftape/
obj-$(CONFIG_COBALT_LCD) += lcd.o
obj-$(CONFIG_PPDEV) += ppdev.o
obj-$(CONFIG_NWBUTTON) += nwbutton.o
obj-$(CONFIG_NWFLASH) += nwflash.o
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
+obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
+obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
This option enables support for LEDs connected to GPIO lines
on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
-config LEDS_OMAP_PWM
- tristate "LED Support for OMAP PWM-controlled LEDs"
- depends on LEDS_CLASS && ARCH_OMAP && OMAP_DM_TIMER
+config LEDS_AMS_DELTA
+ tristate "LED Support for the Amstrad Delta (E3)"
+ depends LEDS_CLASS && MACH_AMS_DELTA
help
- This options enables support for LEDs connected to GPIO lines
- controlled by a PWM timer on OMAP CPUs.
+ This option enables support for the LEDs on Amstrad Delta (E3).
+
+config LEDS_NET48XX
+ tristate "LED Support for Soekris net48xx series Error LED"
+ depends on LEDS_CLASS && SCx200_GPIO
+ help
+ This option enables support for the Soekris net4801 and net4826 error
+ LED.
config LEDS_OMAP
tristate "LED Support for OMAP GPIO LEDs"
help
This option enables support for the LEDs on OMAP processors.
+config LEDS_OMAP_PWM
+ tristate "LED Support for OMAP PWM-controlled LEDs"
+ depends on LEDS_CLASS && ARCH_OMAP && OMAP_DM_TIMER
+ help
+ This options enables support for LEDs connected to GPIO lines
+ controlled by a PWM timer on OMAP CPUs.
+
comment "LED Triggers"
config LEDS_TRIGGERS
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
+config LEDS_TRIGGER_HEARTBEAT
+ tristate "LED Heartbeat Trigger"
+ depends LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by a CPU load average.
+ The flash frequency is a hyperbolic function of the 1-minute
+ load average.
+ If unsure, say Y.
+
endmenu
obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o
obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
+obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
+obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_OMAP) += leds-omap.o
obj-$(CONFIG_LEDS_OMAP_PWM) += leds-omap-pwm.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
+obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
device thinks the write was successful, a bit could have been
flipped accidentaly due to device wear or something else.
+config MTD_NAND_ECC_SMC
+ bool "NAND ECC Smart Media byte order"
+ depends on MTD_NAND
+ default n
+ help
+ Software ECC according to the Smart Media Specification.
+ The original Linux implementation had byte 0 and 1 swapped.
+
config MTD_NAND_AUTCPU12
tristate "SmartMediaCard on autronix autcpu12 board"
depends on MTD_NAND && ARCH_AUTCPU12
help
If you had to ask, you don't have one. Say 'N'.
+config MTD_NAND_AMS_DELTA
+ tristate "NAND Flash device on Amstrad E3"
+ depends on MACH_AMS_DELTA && MTD_NAND
+ help
+ Support for NAND flash on Amstrad E3 (Delta).
+
config MTD_NAND_OMAP
tristate "NAND Flash device on OMAP H3/H2/P2 boards"
depends on ARM && ARCH_OMAP1 && MTD_NAND && (MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_PERSEUS2)
config MTD_NAND_TOTO
tristate "NAND Flash device on TOTO board"
- depends on ARCH_OMAP && MTD_NAND
+ depends on ARCH_OMAP && MTD_NAND && BROKEN
help
Support for NAND flash on Texas Instruments Toto platform.
+config MTD_NAND_TS7250
+ tristate "NAND Flash device on TS-7250 board"
+ depends on MACH_TS72XX && MTD_NAND
+ help
+ Support for NAND flash on Technologic Systems TS-7250 platform.
+
config MTD_NAND_IDS
tristate
config MTD_NAND_PPCHAMELEONEVB
tristate "NAND Flash device on PPChameleonEVB board"
- depends on PPCHAMELEONEVB && MTD_NAND
+ depends on PPCHAMELEONEVB && MTD_NAND && BROKEN
help
This enables the NAND flash driver on the PPChameleon EVB Board.
This enables the NAND flash controller on the S3C2410 and S3C2440
SoCs
- No board specfic support is done by this driver, each board
+ No board specific support is done by this driver, each board
must advertise a platform_device for the driver to attach.
config MTD_NAND_S3C2410_DEBUG
currently not be able to switch to software, as there is no
implementation for ECC method used by the S3C2410
+config MTD_NAND_NDFC
+ tristate "NDFC NanD Flash Controller"
+ depends on MTD_NAND && 44x
+ help
+ NDFC Nand Flash Controllers are integrated in EP44x SoCs
+
+config MTD_NAND_S3C2410_CLKSTOP
+ bool "S3C2410 NAND IDLE clock stop"
+ depends on MTD_NAND_S3C2410
+ default n
+ help
+ Stop the clock to the NAND controller when there is no chip
+ selected to save power. This will mean there is a small delay
+ when the is NAND chip selected or released, but will save
+ approximately 5mA of power when there is nothing happening.
+
config MTD_NAND_DISKONCHIP
tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
depends on MTD_NAND && EXPERIMENTAL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
depends on MTD_NAND && ARCH_PXA
+config MTD_NAND_CS553X
+ tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+ depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH)
+ help
+ The CS553x companion chips for the AMD Geode processor
+ include NAND flash controllers with built-in hardware ECC
+ capabilities; enabling this option will allow you to use
+ these. The driver will check the MSRs to verify that the
+ controller is enabled for NAND, and currently requires that
+ the controller be in MMIO mode.
+
+ If you say "m", the module will be called "cs553x_nand.ko".
+
config MTD_NAND_NANDSIM
tristate "Support for NAND Flash Simulator"
depends on MTD_NAND && MTD_PARTITIONS
help
- The simulator may simulate verious NAND flash chips for the
+ The simulator may simulate various NAND flash chips for the
MTD nand layer.
endmenu
obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
+obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o
obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o
+obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
+obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
+obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
obj-$(CONFIG_MTD_NAND_OMAP) += omap-nand-flash.o
obj-$(CONFIG_MTD_NAND_OMAP_HW) += omap-hw.o
* This file is licenced under the GPL.
*/
-#include <linux/signal.h> /* SA_INTERRUPT */
+#include <linux/signal.h> /* IRQF_DISABLED */
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
retval = -ENXIO;
goto err2;
}
- retval = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (retval)
goto err2;
menu "Graphics support"
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ default y
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
config FB
tristate "Support for frame buffer devices"
---help---
depends on FB
default n
-config FB_FIRMWARE_EDID
- bool "Enable firmware EDID"
- depends on FB
- default y
- ---help---
- This enables access to the EDID transferred from the firmware.
- On the i386, this is from the Video BIOS. Enable this if DDC/I2C
- transfers do not work for your driver and if you are using
- nvidiafb, i810fb or savagefb.
-
- In general, choosing Y for this option is safe. If you
- experience extremely long delays while booting before you get
- something on your display, try setting this to N. Matrox cards in
- combination with certain motherboards and monitors are known to
- suffer from this problem.
+config FB_BACKLIGHT
+ bool
+ depends on FB
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default n
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
here and read <file:Documentation/modules.txt>. The module
will be called amba-clcd.
+choice
+
+ depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
+ prompt "LCD Panel"
+ default FB_ARMCLCD_SHARP_LQ035Q7DB02
+
+config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
+ bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
+ help
+ This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
+ color QVGA, HRTFT panel. The LogicPD device includes an
+ an integrated HRTFT controller IC.
+ The native resolution is 240x320.
+
+config FB_ARMCLCD_SHARP_LQ057Q3DC02
+ bool "LogicPD LCD 5.7\" QVGA"
+ help
+ This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
+ color QVGA, TFT panel. The LogicPD device includes an
+ The native resolution is 320x240.
+
+config FB_ARMCLCD_SHARP_LQ64D343
+ bool "LogicPD LCD 6.4\" VGA"
+ help
+ This is an implementation of the Sharp LQ64D343, a 6.4"
+ color VGA, TFT panel. The LogicPD device includes an
+ The native resolution is 640x480.
+
+config FB_ARMCLCD_SHARP_LQ10D368
+ bool "LogicPD LCD 10.4\" VGA"
+ help
+ This is an implementation of the Sharp LQ10D368, a 10.4"
+ color VGA, TFT panel. The LogicPD device includes an
+ The native resolution is 640x480.
+
+
+config FB_ARMCLCD_SHARP_LQ121S1DG41
+ bool "LogicPD LCD 12.1\" SVGA"
+ help
+ This is an implementation of the Sharp LQ121S1DG41, a 12.1"
+ color SVGA, TFT panel. The LogicPD device includes an
+ The native resolution is 800x600.
+
+ This panel requires a clock rate may be an integer fraction
+ of the base LCDCLK frequency. The driver will select the
+ highest frequency available that is lower than the maximum
+ allowed. The panel may flicker if the clock rate is
+ slower than the recommended minimum.
+
+config FB_ARMCLCD_AUO_A070VW01_WIDE
+ bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
+ help
+ This is an implementation of the AU Optronics, a 7.0"
+ WIDE Color. The native resolution is 234x480.
+
+config FB_ARMCLCD_HITACHI
+ bool "Hitachi Wide Screen 800x480"
+ help
+ This is an implementation of the Hitachi 800x480.
+
+endchoice
+
+
config FB_ACORN
bool "Acorn VIDC support"
depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
config FB_CONTROL
bool "Apple \"control\" display support"
- depends on (FB = y) && PPC_PMAC
+ depends on (FB = y) && PPC_PMAC && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_PLATINUM
bool "Apple \"platinum\" display support"
- depends on (FB = y) && PPC_PMAC
+ depends on (FB = y) && PPC_PMAC && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_VALKYRIE
bool "Apple \"valkyrie\" display support"
- depends on (FB = y) && (MAC || PPC_PMAC)
+ depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CT65550
bool "Chips 65550 display support"
- depends on (FB = y) && PPC
+ depends on (FB = y) && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-config VIDEO_SELECT
- bool
- depends on FB_VESA
- default y
+config FB_IMAC
+ bool "Intel-based Macintosh Framebuffer Support"
+ depends on (FB = y) && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Intel-based Macintosh
config FB_HGA
tristate "Hercules mono graphics support"
This will compile the Hercules mono graphics with
acceleration functions.
-
-config VIDEO_SELECT
- bool
- depends on (FB = y) && X86
- default y
-
config FB_SGIVW
tristate "SGI Visual Workstation framebuffer support"
depends on FB && X86_VISWS
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_NVIDIA && PMAC_BACKLIGHT
+ select FB_BACKLIGHT
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
of debugging informations to provide to the maintainer when
something goes wrong.
+config FB_RIVA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RIVA && PMAC_BACKLIGHT
+ select FB_BACKLIGHT
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86_32
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86_32
+ depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
There is a product page at
http://apps.ati.com/ATIcompare/
+
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
help
Say Y here if you want DDC/I2C support for your Radeon board.
+config FB_RADEON_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RADEON && PMAC_BACKLIGHT
+ select FB_BACKLIGHT
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_RADEON_DEBUG
bool "Lots of debug output from Radeon driver"
depends on FB_RADEON
To compile this driver as a module, choose M here: the
module will be called aty128fb.
+config FB_ATY128_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY128 && PMAC_BACKLIGHT
+ select FB_BACKLIGHT
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
depends on FB && !SPARC32
is at
<http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+config FB_ATY_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY && PMAC_BACKLIGHT
+ select FB_BACKLIGHT
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_S3TRIO
bool "S3 Trio display support"
depends on (FB = y) && PPC && BROKEN
<file:Documentation/fb/pxafb.txt> describes the available parameters.
+config FB_MBX
+ tristate "2700G LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Intel 2700G (Marathon) Graphics
+ Accelerator
+
+config FB_MBX_DEBUG
+ bool "Enable debugging info via debugfs"
+ depends on FB_MBX && DEBUG_FS
+ default n
+ ---help---
+ Enable this if you want debugging information using the debug
+ filesystem (debugfs)
+
+ If unsure, say N.
+
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
-source "drivers/video/omap/Kconfig"
+config FB_PNX4008_DUM
+ tristate "Display Update Module support on Philips PNX4008 board"
+ depends on FB && ARCH_PNX4008
+ ---help---
+ Say Y here to enable support for PNX4008 Display Update Module (DUM)
+
+config FB_PNX4008_DUM_RGB
+ tristate "RGB Framebuffer support on Philips PNX4008 board"
+ depends on FB_PNX4008_DUM
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here to enable support for PNX4008 RGB Framebuffer
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
module will be called vfb.
If unsure, say N.
+
+source "drivers/video/omap/Kconfig"
+
if VT
source "drivers/video/console/Kconfig"
endif
source "drivers/video/logo/Kconfig"
endif
-if FB && SYSFS
+if SYSFS
source "drivers/video/backlight/Kconfig"
endif
#include <linux/console.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/interrupt.h> /* For in_interrupt() */
-#include <linux/config.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/security.h>
DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */
};
-EXPORT_SYMBOL(console_printk);
+EXPORT_UNUSED_SYMBOL(console_printk); /* June 2006 */
/*
* Low lever drivers may need that to know if they can schedule in
* driver system.
*/
static DECLARE_MUTEX(console_sem);
+static DECLARE_MUTEX(secondary_console_sem);
struct console *console_drivers;
/*
* This is used for debugging the mess that is the VT code by
* path in the console code where we end up in places I want
* locked without the console sempahore held
*/
-static int console_locked;
+static int console_locked, console_suspended;
/*
* logbuf_lock protects log_buf, log_start, log_end, con_start and logged_chars
struct console *con;
for (con = console_drivers; con; con = con->next) {
- if ((con->flags & CON_ENABLED) && con->write)
+ if ((con->flags & CON_ENABLED) && con->write &&
+ (cpu_online(smp_processor_id()) ||
+ (con->flags & CON_ANYTIME)))
con->write(con, &LOG_BUF(start), end - start);
}
}
return sched_clock();
}
+/* Check if we have any console registered that can be called early in boot. */
+static int have_callable_console(void)
+{
+ struct console *con;
+
+ for (con = console_drivers; con; con = con->next)
+ if (con->flags & CON_ANYTIME)
+ return 1;
+
+ return 0;
+}
+
/**
* printk - print a kernel message
* @fmt: format string
zap_locks();
/* This stops the holder of console_sem just where we want him */
- spin_lock_irqsave(&logbuf_lock, flags);
+ local_irq_save(flags);
+ lockdep_off();
+ spin_lock(&logbuf_lock);
printk_cpu = smp_processor_id();
/* Emit the output into the temporary buffer */
log_level_unknown = 1;
}
- if (!cpu_online(smp_processor_id())) {
+ if (!down_trylock(&console_sem)) {
/*
- * Some console drivers may assume that per-cpu resources have
- * been allocated. So don't allow them to be called by this
- * CPU until it is officially up. We shouldn't be calling into
- * random console drivers on a CPU which doesn't exist yet..
+ * We own the drivers. We can drop the spinlock and
+ * let release_console_sem() print the text, maybe ...
*/
- printk_cpu = UINT_MAX;
- spin_unlock_irqrestore(&logbuf_lock, flags);
- goto out;
- }
- if (!down_trylock(&console_sem)) {
console_locked = 1;
+ printk_cpu = UINT_MAX;
+ spin_unlock(&logbuf_lock);
+
/*
- * We own the drivers. We can drop the spinlock and let
- * release_console_sem() print the text
+ * Console drivers may assume that per-cpu resources have
+ * been allocated. So unless they're explicitly marked as
+ * being able to cope (CON_ANYTIME) don't call them until
+ * this CPU is officially up.
*/
- printk_cpu = UINT_MAX;
- spin_unlock_irqrestore(&logbuf_lock, flags);
- console_may_schedule = 0;
- release_console_sem();
+ if (cpu_online(smp_processor_id()) || have_callable_console()) {
+ console_may_schedule = 0;
+ release_console_sem();
+ } else {
+ /* Release by hand to avoid flushing the buffer. */
+ console_locked = 0;
+ up(&console_sem);
+ }
+ lockdep_on();
+ local_irq_restore(flags);
} else {
/*
* Someone else owns the drivers. We drop the spinlock, which
* console drivers with the output which we just produced.
*/
printk_cpu = UINT_MAX;
- spin_unlock_irqrestore(&logbuf_lock, flags);
+ spin_unlock(&logbuf_lock);
+ lockdep_on();
+ local_irq_restore(flags);
}
-out:
+
preempt_enable();
return printed_len;
}
return 0;
}
+/**
+ * suspend_console - suspend the console subsystem
+ *
+ * This disables printk() while we go into suspend states
+ */
+void suspend_console(void)
+{
+ acquire_console_sem();
+ console_suspended = 1;
+}
+
+void resume_console(void)
+{
+ console_suspended = 0;
+ release_console_sem();
+}
+
/**
* acquire_console_sem - lock the console system for exclusive use.
*
void acquire_console_sem(void)
{
BUG_ON(in_interrupt());
+ if (console_suspended) {
+ down(&secondary_console_sem);
+ return;
+ }
down(&console_sem);
console_locked = 1;
console_may_schedule = 1;
{
return console_locked;
}
-EXPORT_SYMBOL(is_console_locked);
+EXPORT_UNUSED_SYMBOL(is_console_locked); /* June 2006 */
/**
* release_console_sem - unlock the console system
unsigned long _con_start, _log_end;
unsigned long wake_klogd = 0;
+ if (console_suspended) {
+ up(&secondary_console_sem);
+ return;
+ }
+
+ console_may_schedule = 0;
+
for ( ; ; ) {
spin_lock_irqsave(&logbuf_lock, flags);
wake_klogd |= log_start - log_end;
local_irq_restore(flags);
}
console_locked = 0;
- console_may_schedule = 0;
up(&console_sem);
spin_unlock_irqrestore(&logbuf_lock, flags);
- if (wake_klogd && !oops_in_progress && waitqueue_active(&log_wait))
- wake_up_interruptible(&log_wait);
+ if (wake_klogd && !oops_in_progress && waitqueue_active(&log_wait)) {
+ /*
+ * If we printk from within the lock dependency code,
+ * from within the scheduler code, then do not lock
+ * up due to self-recursion:
+ */
+ if (!lockdep_internal())
+ wake_up_interruptible(&log_wait);
+ }
}
EXPORT_SYMBOL(release_console_sem);
projects / linux-2.6-omap-h63xx.git / commitdiff