]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] Orion: add a separate BRIDGE_INT_TIMER1_CLR define
authorKe Wei <kewei@marvell.com>
Fri, 23 May 2008 08:23:22 +0000 (10:23 +0200)
committerLennert Buytenhek <buytenh@marvell.com>
Sun, 22 Jun 2008 20:45:01 +0000 (22:45 +0200)
Some Feroceon-based SoCs have an MBUS bridge interrupt controller
that requires writing a one instead of a zero to clear edge
interrupt sources such as timer expiry.

This patch adds a new BRIDGE_INT_TIMER1_CLR define, which platform
code can set to either ~BRIDGE_INT_TIMER1 (write-zero-to-clear) or
BRIDGE_INT_TIMER1 (write-one-to-clear) depending on the platform.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
arch/arm/plat-orion/time.c
include/asm-arm/arch-orion5x/orion5x.h

index 28b5285446e838d6f0b55fbc2fdaa8af7d7bb919..93c4ef9f00673358a0b8169b25fafd4b356b0df6 100644 (file)
@@ -74,7 +74,7 @@ orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
        /*
         * Clear and enable clockevent timer interrupt.
         */
-       writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+       writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
 
        u = readl(BRIDGE_MASK);
        u |= BRIDGE_INT_TIMER1;
@@ -138,7 +138,7 @@ orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
                /*
                 * ACK pending timer interrupt.
                 */
-               writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+               writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
 
        }
        local_irq_restore(flags);
@@ -159,7 +159,7 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
        /*
         * ACK timer interrupt and call event handler.
         */
-       writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+       writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
        orion_clkevt.event_handler(&orion_clkevt);
 
        return IRQ_HANDLED;
index 20f7b406a798d716e721f4cde8d597e20b1b466d..10257f5c5e9ecb1151674eb7eecc5b0541e16a40 100644 (file)
 #define BRIDGE_MASK            ORION5X_BRIDGE_REG(0x114)
 #define  BRIDGE_INT_TIMER0     0x0002
 #define  BRIDGE_INT_TIMER1     0x0004
+#define  BRIDGE_INT_TIMER1_CLR (~0x0004)
 #define MAIN_IRQ_CAUSE         ORION5X_BRIDGE_REG(0x200)
 #define MAIN_IRQ_MASK          ORION5X_BRIDGE_REG(0x204)