#include "airo.h"
 
+#define DRV_NAME "airo"
+
 #ifdef CONFIG_PCI
 static struct pci_device_id card_ids[] = {
        { 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, },
 static int airo_pci_resume(struct pci_dev *pdev);
 
 static struct pci_driver airo_driver = {
-       .name     = "airo",
+       .name     = DRV_NAME,
        .id_table = card_ids,
        .probe    = airo_pci_probe,
        .remove   = __devexit_p(airo_pci_remove),
 static int flashrestart(struct airo_info *ai,struct net_device *dev);
 
 #define airo_print(type, name, fmt, args...) \
-       { printk(type "airo(%s): " fmt "\n", name, ##args); }
+       printk(type DRV_NAME "(%s): " fmt "\n", name, ##args)
 
 #define airo_print_info(name, fmt, args...) \
        airo_print(KERN_INFO, name, fmt, ##args)
  * 2) Map PCI memory for issueing commands.
  * 3) Allocate memory (shared) to send and receive ethernet frames.
  */
-static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci,
-                   const char *name)
+static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci)
 {
        unsigned long mem_start, mem_len, aux_start, aux_len;
        int rc = -1;
        aux_start = pci_resource_start(pci, 2);
        aux_len = AUXMEMSIZE;
 
-       if (!request_mem_region(mem_start, mem_len, name)) {
-               airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s",
-                      (int)mem_start, (int)mem_len, name);
+       if (!request_mem_region(mem_start, mem_len, DRV_NAME)) {
+               airo_print_err("", "Couldn't get region %x[%x]",
+                       (int)mem_start, (int)mem_len);
                goto out;
        }
-       if (!request_mem_region(aux_start, aux_len, name)) {
-               airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s",
-                      (int)aux_start, (int)aux_len, name);
+       if (!request_mem_region(aux_start, aux_len, DRV_NAME)) {
+               airo_print_err("", "Couldn't get region %x[%x]",
+                       (int)aux_start, (int)aux_len);
                goto free_region1;
        }
 
        ai->pcimem = ioremap(mem_start, mem_len);
        if (!ai->pcimem) {
-               airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s",
-                      (int)mem_start, (int)mem_len, name);
+               airo_print_err("", "Couldn't map region %x[%x]",
+                       (int)mem_start, (int)mem_len);
                goto free_region2;
        }
        ai->pciaux = ioremap(aux_start, aux_len);
        if (!ai->pciaux) {
-               airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s",
-                      (int)aux_start, (int)aux_len, name);
+               airo_print_err("", "Couldn't map region %x[%x]",
+                       (int)aux_start, (int)aux_len);
                goto free_memmap;
        }
 
        /* Reserve PKTSIZE for each fid and 2K for the Rids */
        ai->shared = pci_alloc_consistent(pci, PCI_SHARED_LEN, &ai->shared_dma);
        if (!ai->shared) {
-               airo_print_err(ai->dev->name, "Couldn't alloc_consistent %d",
-                      PCI_SHARED_LEN);
+               airo_print_err("", "Couldn't alloc_consistent %d",
+                       PCI_SHARED_LEN);
                goto free_auxmap;
        }
 
            kzalloc(AIRO_MAX_NETWORK_COUNT * sizeof(BSSListElement),
                    GFP_KERNEL);
        if (!ai->networks) {
-               airo_print_warn(ai->dev->name, "Out of memory allocating beacons");
+               airo_print_warn("", "Out of memory allocating beacons");
                return -ENOMEM;
        }
 
 {
        int status;
        CapabilityRid cap_rid;
-       const char *name = ai->dev->name;
 
        status = readCapabilityRid(ai, &cap_rid, 1);
        if (status != SUCCESS) return 0;
        /* Only firmware versions 5.30.17 or better can do WPA */
        if ((cap_rid.softVer > 0x530)
          || ((cap_rid.softVer == 0x530) && (cap_rid.softSubVer >= 17))) {
-               airo_print_info(name, "WPA is supported.");
+               airo_print_info("", "WPA is supported.");
                return 1;
        }
 
        /* No WPA support */
-       airo_print_info(name, "WPA unsupported (only firmware versions 5.30.17"
+       airo_print_info("", "WPA unsupported (only firmware versions 5.30.17"
                " and greater support WPA.  Detected %s)", cap_rid.prodVer);
        return 0;
 }
        int i, rc;
 
        /* Create the network device object. */
-        dev = alloc_etherdev(sizeof(*ai));
-        if (!dev) {
+       dev = alloc_netdev(sizeof(*ai), "", ether_setup);
+       if (!dev) {
                airo_print_err("", "Couldn't alloc_etherdev");
                return NULL;
-        }
-       if (dev_alloc_name(dev, dev->name) < 0) {
-               airo_print_err("", "Couldn't get name!");
-               goto err_out_free;
        }
 
        ai = dev->priv;
        ai->jobs = 0;
        ai->dev = dev;
        if (pci && (pci->device == 0x5000 || pci->device == 0xa504)) {
-               airo_print_dbg(dev->name, "Found an MPI350 card");
+               airo_print_dbg("", "Found an MPI350 card");
                set_bit(FLAG_MPI, &ai->flags);
        }
        spin_lock_init(&ai->aux_lock);
        msleep(400);
 
        if (!is_pcmcia) {
-               if (!request_region( dev->base_addr, 64, dev->name )) {
+               if (!request_region(dev->base_addr, 64, DRV_NAME)) {
                        rc = -EBUSY;
                        airo_print_err(dev->name, "Couldn't request region");
                        goto err_out_nets;
        }
 
        if (test_bit(FLAG_MPI,&ai->flags)) {
-               if (mpi_map_card(ai, pci, dev->name)) {
-                       airo_print_err(dev->name, "Could not map memory");
+               if (mpi_map_card(ai, pci)) {
+                       airo_print_err("", "Could not map memory");
                        goto err_out_res;
                }
        }
                ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra);
        }
 
+       strcpy(dev->name, "eth%d");
        rc = register_netdev(dev);
        if (rc) {
                airo_print_err(dev->name, "Couldn't register_netdev");
                }
                if ( !(max_tries--) ) {
                        airo_print_err(ai->dev->name,
-                               "airo: BAP setup error too many retries\n");
+                               "BAP setup error too many retries\n");
                        return ERROR;
                }
                // -- PC4500 missed it, try again