bool "PA Semi IOMMU support"
        depends on PPC_PASEMI
        help
-         IOMMU support for PA6T-1682M
+         IOMMU support for PA Semi PWRficient
 
 config PPC_PASEMI_IOMMU_DMA_FORCE
        bool "Force DMA engine to use IOMMU"
 
        if (!cpu)
                goto out;
 
-       dn = of_find_compatible_node(NULL, "sdc", "1682m-sdc");
+       dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
+       if (!dn)
+               dn = of_find_compatible_node(NULL, NULL,
+                                            "pasemi,pwrficient-sdc");
        if (!dn)
                goto out;
        err = of_address_to_resource(dn, 0, &res);
                goto out;
        }
 
-       dn = of_find_compatible_node(NULL, "gizmo", "1682m-gizmo");
+       dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo");
+       if (!dn)
+               dn = of_find_compatible_node(NULL, NULL,
+                                            "pasemi,pwrficient-gizmo");
        if (!dn) {
                err = -ENODEV;
                goto out_unmap_sdcasr;
 
 static int __init pas_cpufreq_init(void)
 {
-       if (!machine_is_compatible("PA6T-1682M"))
+       if (!machine_is_compatible("PA6T-1682M") &&
+           !machine_is_compatible("pasemi,pwrficient"))
                return -ENODEV;
 
        return cpufreq_register_driver(&pas_cpufreq_driver);
 
 {
        struct device_node *np;
 
-       np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
+       np = of_find_compatible_node(NULL, NULL, "1682m-gpio");
+       if (!np)
+               np = of_find_compatible_node(NULL, NULL,
+                                            "pasemi,pwrficient-gpio");
        if (!np)
                return -ENODEV;
        gpio_regs = of_iomap(np, 0);
 
 
 
 static struct of_device_id pasemi_bus_ids[] = {
+       /* Unfortunately needed for legacy firmwares */
        { .type = "localbus", },
        { .type = "sdc", },
+       /* These are the proper entries, which newer firmware uses */
+       { .compatible = "pasemi,localbus", },
+       { .compatible = "pasemi,sdc", },
        {},
 };
 
 {
        unsigned long root = of_get_flat_dt_root();
 
-       if (!of_flat_dt_is_compatible(root, "PA6T-1682M"))
+       if (!of_flat_dt_is_compatible(root, "PA6T-1682M") &&
+           !of_flat_dt_is_compatible(root, "pasemi,pwrficient"))
                return 0;
 
        hpte_init_native();
 }
 
 define_machine(pasemi) {
-       .name                   = "PA Semi PA6T-1682M",
+       .name                   = "PA Semi PWRficient",
        .probe                  = pas_probe,
        .setup_arch             = pas_setup_arch,
        .init_early             = pas_init_early,
 
        default HW_RANDOM
        ---help---
          This driver provides kernel-side support for the Random Number
-         Generator hardware found on PA6T-1682M processor.
+         Generator hardware found on PA Semi PWRficient SoCs.
 
          To compile this driver as a module, choose M here: the
          module will be called pasemi-rng.
 
 }
 
 static struct of_device_id rng_match[] = {
-       {
-               .compatible      = "1682m-rng",
-       },
-       {},
+       { .compatible      = "1682m-rng", },
+       { .compatible      = "pasemi,pwrficient-rng", },
+       { },
 };
 
 static struct of_platform_driver rng_driver = {
 
                EDAC_FLAG_NONE;
        mci->mod_name = MODULE_NAME;
        mci->dev_name = pci_name(pdev);
-       mci->ctl_name = "pasemi,1682m-mc";
+       mci->ctl_name = "pasemi,pwrficient-mc";
        mci->edac_check = pasemi_edac_check;
        mci->ctl_page_to_phys = NULL;
        pci_read_config_dword(pdev, MCCFG_SCRUB, &scrub);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>");
-MODULE_DESCRIPTION("MC support for PA Semi PA6T-1682M memory controller");
+MODULE_DESCRIPTION("MC support for PA Semi PWRficient memory controller");