[PATCH] ARM: OMAP: remove unused+conflicting header symbols

This removes some no-longer-needed definitions from some board
header files; they cause lots of noise with multi-OMAP builds.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap/omap1/board-perseus2.c b/arch/arm/mach-omap/omap1/board-perseus2.c
index e3e5cae302ff1084e2149c903d3f831f472cfdc4..f5200e007f91de85e1c51752093b5b1b8f5ce5db 100644 (file)
--- a/arch/arm/mach-omap/omap1/board-perseus2.c
+++ b/arch/arm/mach-omap/omap1/board-perseus2.c
@@ -84,8 +84,8 @@ static struct flash_platform_data p2_flash_data = {
 };
 
 static struct resource p2_flash_resource = {
-       .start          = OMAP_FLASH_0_START,
-       .end            = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1,
+       .start          = OMAP_CS0_PHYS,
+       .end            = OMAP_CS0_PHYS + SZ_32M - 1,
        .flags          = IORESOURCE_MEM,
 };
 

diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
index 0f1abaefe4decf6c81f7c5d8feefb3b8ee24c9bc..79574e0ed13d3c82d03c13cd4fbcc7df69d5f4c2 100644 (file)
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ b/include/asm-arm/arch-omap/board-innovator.h
@@ -36,31 +36,6 @@
 #define OMAP1510P1_EMIFS_PRI_VALUE             0x00
 #define OMAP1510P1_EMIFF_PRI_VALUE             0x00
 
-/*
- * These definitions define an area of FLASH set aside
- * for the use of MTD/JFFS2. This is the area of flash
- * that a JFFS2 filesystem will reside which is mounted
- * at boot with the "root=/dev/mtdblock/0 rw"
- * command line option. The flash address used here must
- * fall within the legal range defined by rrload for storing
- * the filesystem component. This address will be sufficiently
- * deep into the overall flash range to avoid the other
- * components also stored in flash such as the bootloader,
- * the bootloader params, and the kernel.
- * The SW2 settings for the map below are:
- * 1 off, 2 off, 3 on, 4 off.
- */
-
-/* Intel flash_0, partitioned as expected by rrload */
-#define OMAP_FLASH_0_BASE      0xD8000000
-#define OMAP_FLASH_0_START     0x00000000
-#define OMAP_FLASH_0_SIZE      SZ_16M
-
-/* Intel flash_1, used for cramfs or other flash file systems */
-#define OMAP_FLASH_1_BASE      0xD9000000
-#define OMAP_FLASH_1_START     0x01000000
-#define OMAP_FLASH_1_SIZE      SZ_16M
-
 #define NR_FPGA_IRQS           24
 #define NR_IRQS                 IH_BOARD_BASE + NR_FPGA_IRQS
 

diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
index 0c224cc74fe4289678408a1095758723c9a18af1..eb74420cb43983ec4a8225614574fed82fbe0178 100644 (file)
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ b/include/asm-arm/arch-omap/board-perseus2.h
@@ -36,19 +36,6 @@
 #define OMAP_SDRAM_DEVICE              D256M_1X16_4B
 #endif
 
-/*
- * These definitions define an area of FLASH set aside
- * for the use of MTD/JFFS2. This is the area of flash
- * that a JFFS2 filesystem will reside which is mounted
- * at boot with the "root=/dev/mtdblock/0 rw"
- * command line option.
- */
-
-/* Intel flash_0, partitioned as expected by rrload */
-#define OMAP_FLASH_0_BASE      0xD8000000      /* VA */
-#define OMAP_FLASH_0_START     0x00000000      /* PA */
-#define OMAP_FLASH_0_SIZE      SZ_32M
-
 #define MAXIRQNUM              IH_BOARD_BASE
 #define MAXFIQNUM              MAXIRQNUM
 #define MAXSWINUM              MAXIRQNUM