[MTD] [NAND] fix s3c2410 error correction

The single-bit error correction was, well, incorrect. For determing which
bit to correct it was using P1' P2' P4' P8' instead of P1 P2 P4 P8, and
it was using P16' P32' P64' P128' P256' P512' P1024' P2048' instead of
P16 P32 P64 P128 P256 P512 P1024 P2048.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 21a2cc8636dff07e86eb6b4b84b6457f981e44d7..d31cb7b3feeb75b6f0376422f1c53a2d3c696d98 100644 (file)
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -366,23 +366,21 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
            ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
                /* calculate the bit position of the error */
 
            ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
                /* calculate the bit position of the error */
 

-               bit  = (diff2 >> 2) & 1;
-               bit |= (diff2 >> 3) & 2;
-               bit |= (diff2 >> 4) & 4;
+               bit  = ((diff2 >> 3) & 1) |
+                      ((diff2 >> 4) & 2) |
+                      ((diff2 >> 5) & 4);

 
                /* calculate the byte position of the error */
 
 
                /* calculate the byte position of the error */
 

-               byte  = (diff1 << 1) & 0x80;
-               byte |= (diff1 << 2) & 0x40;
-               byte |= (diff1 << 3) & 0x20;
-               byte |= (diff1 << 4) & 0x10;
-
-               byte |= (diff0 >> 3) & 0x08;
-               byte |= (diff0 >> 2) & 0x04;
-               byte |= (diff0 >> 1) & 0x02;
-               byte |= (diff0 >> 0) & 0x01;
-
-               byte |= (diff2 << 8) & 0x100;
+               byte = ((diff2 << 7) & 0x100) |
+                      ((diff1 << 0) & 0x80)  |
+                      ((diff1 << 1) & 0x40)  |
+                      ((diff1 << 2) & 0x20)  |
+                      ((diff1 << 3) & 0x10)  |
+                      ((diff0 >> 4) & 0x08)  |
+                      ((diff0 >> 3) & 0x04)  |
+                      ((diff0 >> 2) & 0x02)  |
+                      ((diff0 >> 1) & 0x01);

 
                dev_dbg(info->device, "correcting error bit %d, byte %d\n",
                        bit, byte);
 
                dev_dbg(info->device, "correcting error bit %d, byte %d\n",
                        bit, byte);