Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)
Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
- pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) ||
+ pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
if ((err = pci_enable_device(pci)) < 0)
return err;
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
printk(KERN_ERR "error setting 28bit DMA mask\n");
pci_disable_device(pci);
return -ENXIO;
printk(KERN_ERR "error setting 28bit DMA mask\n");
pci_disable_device(pci);
return -ENXIO;
if ((err = pci_enable_device(pci)) < 0)
return err;
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
snd_printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
if (err < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
if (err < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
return -EIO;
/* check, if we can restrict PCI DMA transfers to 28 bits */
return -EIO;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;