- /*
- * system_rev encoding is as follows
- * system_rev & 0xff000000 -> Omap Class (24xx/34xx)
- * system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
- * system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
- * system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
- * system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
- * system_rev & 0x000000c0 -> IDCODE revision[6:7]
- * system_rev & 0x0000003f -> sys_boot[0:5]
- */
- /* Embedding the ES revision info in type field */
- system_rev = type;
- /* Also add IDCODE revision info only two lower bits */
- system_rev |= ((rev & 0x3) << 6);
-
- /* Add in the device type and sys_boot fields (see above) */
- if (cpu_is_omap24xx()) {
- i = OMAP24XX_CONTROL_STATUS;
- } else if (cpu_is_omap343x()) {
- i = OMAP343X_CONTROL_STATUS;
- } else {
- printk(KERN_ERR "id: unknown CPU type\n");
- BUG();
- }
- ctrl_status = omap_ctrl_readl(i);
- system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
- OMAP2_SYSBOOT_4_MASK |
- OMAP2_SYSBOOT_3_MASK |
- OMAP2_SYSBOOT_2_MASK |
- OMAP2_SYSBOOT_1_MASK |
- OMAP2_SYSBOOT_0_MASK));
- system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
-}
-
-
-/*
- * _set_omap_chip - set the omap_chip global based on OMAP chip type
- *
- * Build the omap_chip bits. This variable is used by powerdomain and
- * clockdomain code to indicate whether structures are applicable for
- * the current OMAP chip type by ANDing it against a 'platform' bitfield
- * in the structure.
- */
-static void __init _set_omap_chip(void)
-{
- if (cpu_is_omap343x()) {
-
- omap_chip.oc = CHIP_IS_OMAP3430;
- if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
-
- } else if (cpu_is_omap243x()) {
-
- /* Currently only supports 2430ES2.1 and 2430-all */
- omap_chip.oc |= CHIP_IS_OMAP2430;