USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible. In the
few places that will not work out, use a basic printk().
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
radio->curfreq = f->frequency;
if (dsbr100_setfreq(radio, radio->curfreq)==-1)
radio->curfreq = f->frequency;
if (dsbr100_setfreq(radio, radio->curfreq)==-1)
- warn("Set frequency failed");
+ dev_warn(&radio->usbdev->dev, "Set frequency failed\n");
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value) {
if (dsbr100_stop(radio) == -1) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value) {
if (dsbr100_stop(radio) == -1) {
- warn("Radio did not respond properly");
+ dev_warn(&radio->usbdev->dev,
+ "Radio did not respond properly\n");
return -EBUSY;
}
} else {
if (dsbr100_start(radio) == -1) {
return -EBUSY;
}
} else {
if (dsbr100_start(radio) == -1) {
- warn("Radio did not respond properly");
+ dev_warn(&radio->usbdev->dev,
+ "Radio did not respond properly\n");
radio->muted = 1;
if (dsbr100_start(radio)<0) {
radio->muted = 1;
if (dsbr100_start(radio)<0) {
- warn("Radio did not start up properly");
+ dev_warn(&radio->usbdev->dev,
+ "Radio did not start up properly\n");
radio->users = 0;
unlock_kernel();
return -EIO;
radio->users = 0;
unlock_kernel();
return -EIO;
radio->curfreq = FREQ_MIN*FREQ_MUL;
video_set_drvdata(radio->videodev, radio);
if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
radio->curfreq = FREQ_MIN*FREQ_MUL;
video_set_drvdata(radio->videodev, radio);
if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
- warn("Could not register video device");
+ dev_warn(&intf->dev, "Could not register video device\n");
video_device_release(radio->videodev);
kfree(radio->transfer_buffer);
kfree(radio);
video_device_release(radio->videodev);
kfree(radio->transfer_buffer);
kfree(radio);
err("dabusb_iso_complete: invalid len %d", len);
}
else
err("dabusb_iso_complete: invalid len %d", len);
}
else
- warn("dabusb_iso_complete: corrupted packet status: %d", purb->iso_frame_desc[i].status);
+ dev_warn(&purb->dev->dev, "dabusb_iso_complete: corrupted packet status: %d\n", purb->iso_frame_desc[i].status);
if (dst != purb->actual_length)
err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length);
}
if (dst != purb->actual_length)
err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length);
}
- warn("CLEAR_FEATURE request to remove STALL condition.");
+ dev_warn(&s->usbdev->dev, "CLEAR_FEATURE request to remove STALL condition.\n");
if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe)))
err("request failed");
}
if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe)))
err("request failed");
}
reg_w(ov, R51x_SYS_SNAP, 0x02);
reg_w(ov, R51x_SYS_SNAP, 0x00);
} else if (ov->bclass == BCL_OV518) {
reg_w(ov, R51x_SYS_SNAP, 0x02);
reg_w(ov, R51x_SYS_SNAP, 0x00);
} else if (ov->bclass == BCL_OV518) {
- warn("snapshot reset not supported yet on OV518(+)");
+ dev_warn(&ov->dev->dev,
+ "snapshot reset not supported yet on OV518(+)\n");
- err("clear snap: invalid bridge type");
+ dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
if (ov->bclass == BCL_OV511) {
ret = reg_r(ov, R51x_SYS_SNAP);
if (ret < 0) {
if (ov->bclass == BCL_OV511) {
ret = reg_r(ov, R51x_SYS_SNAP);
if (ret < 0) {
- err("Error checking snspshot status (%d)", ret);
+ dev_err(&ov->dev->dev,
+ "Error checking snspshot status (%d)\n", ret);
} else if (ret & 0x08) {
status = 1;
}
} else if (ov->bclass == BCL_OV518) {
} else if (ret & 0x08) {
status = 1;
}
} else if (ov->bclass == BCL_OV518) {
- warn("snapshot check not supported yet on OV518(+)");
+ dev_warn(&ov->dev->dev,
+ "snapshot check not supported yet on OV518(+)\n");
- err("check snap: invalid bridge type");
+ dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
if (ov->bclass == BCL_OV511)
reg_w(ov, 0x11, 0x00);
else
if (ov->bclass == BCL_OV511)
reg_w(ov, 0x11, 0x00);
else
- warn("SAA7111A not yet supported with OV518/OV518+");
+ dev_warn(&ov->dev->dev,
+ "SAA7111A not yet supported with OV518/OV518+\n");
* required. OV518 has no uncompressed mode, to save RAM. */
if (!dumppix && !ov->compress) {
ov->compress = 1;
* required. OV518 has no uncompressed mode, to save RAM. */
if (!dumppix && !ov->compress) {
ov->compress = 1;
- warn("Compression required with OV518...enabling");
+ dev_warn(&ov->dev->dev,
+ "Compression required with OV518...enabling\n");
}
if (ov->bridge == BRG_OV518) {
}
if (ov->bridge == BRG_OV518) {
cam->input = input_dev = input_allocate_device();
if (!input_dev) {
cam->input = input_dev = input_allocate_device();
if (!input_dev) {
- warn("Not enough memory for camera's input device\n");
+ dev_warn(&dev->dev,
+ "Not enough memory for camera's input device\n");
error = input_register_device(cam->input);
if (error) {
error = input_register_device(cam->input);
if (error) {
- warn("Failed to register camera's input device, err: %d\n",
- error);
+ dev_warn(&dev->dev,
+ "Failed to register camera's input device, err: %d\n",
+ error);
input_free_device(cam->input);
cam->input = NULL;
}
input_free_device(cam->input);
cam->input = NULL;
}
cam->input = input_dev = input_allocate_device();
if (!input_dev) {
cam->input = input_dev = input_allocate_device();
if (!input_dev) {
- warn("insufficient mem for cam input device");
+ dev_warn(&dev->dev, "insufficient mem for cam input device\n");
error = input_register_device(cam->input);
if (error) {
error = input_register_device(cam->input);
if (error) {
- warn("Failed to register camera's input device, err: %d\n",
- error);
+ dev_warn(&dev->dev,
+ "Failed to register camera's input device, err: %d\n",
+ error);
input_free_device(cam->input);
cam->input = NULL;
}
input_free_device(cam->input);
cam->input = NULL;
}
dataurb->iso_frame_desc[i].offset;
if (st < 0) {
dataurb->iso_frame_desc[i].offset;
if (st < 0) {
- warn("Data error: packet=%d. len=%d. status=%d.",
- i, n, st);
+ dev_warn(&uvd->dev->dev,
+ "Data error: packet=%d. len=%d. status=%d.\n",
+ i, n, st);
uvd->stats.iso_err_count++;
continue;
}
uvd->stats.iso_err_count++;
continue;
}
ret = qcm_camera_off(uvd);
if (ret)
ret = qcm_camera_off(uvd);
if (ret)
- warn("couldn't turn the cam off.");
+ dev_warn(&uvd->dev->dev, "couldn't turn the cam off.\n");