+/**
+ * get_indexed_reg - Get indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
+{
+ u8 value;
+
+ hwif->OUTB(index, hwif->dma_vendor1);
+ value = hwif->INB(hwif->dma_vendor3);
+
+ DBG("index[%02X] value[%02X]\n", index, value);
+ return value;
+}
+
+/**
+ * set_indexed_reg - Set indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
+{
+ hwif->OUTB(index, hwif->dma_vendor1);
+ hwif->OUTB(value, hwif->dma_vendor3);
+ DBG("index[%02X] value[%02X]\n", index, value);
+}
+
+/*
+ * ATA Timing Tables based on 133 MHz PLL output clock.
+ *
+ * If the PLL outputs 100 MHz clock, the ASIC hardware will set
+ * the timing registers automatically when "set features" command is
+ * issued to the device. However, if the PLL output clock is 133 MHz,
+ * the following tables must be used.
+ */
+static struct pio_timing {
+ u8 reg0c, reg0d, reg13;
+} pio_timings [] = {
+ { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */
+ { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */
+ { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */
+ { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
+ { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
+};
+
+static struct mwdma_timing {
+ u8 reg0e, reg0f;
+} mwdma_timings [] = {
+ { 0xdf, 0x5f }, /* MWDMA mode 0 */
+ { 0x6b, 0x27 }, /* MWDMA mode 1 */
+ { 0x69, 0x25 }, /* MWDMA mode 2 */
+};
+
+static struct udma_timing {
+ u8 reg10, reg11, reg12;
+} udma_timings [] = {
+ { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
+ { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
+ { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
+ { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
+ { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
+ { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
+ { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
+};
+
+static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)