at32_add_device_mci() will refuse to add the mci device if the data
parameter is NULL. Fix up the favr-32 and hammerhead boards so that this
doesn't happen.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Alex Raimondi <mailinglist@miromico.ch>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
#include <linux/linkage.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/linkage.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/atmel-mci.h>
#include <linux/atmel-pwm-bl.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/atmel-pwm-bl.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+
static struct fb_videomode __initdata lb104v03_modes[] = {
{
.name = "640x480 @ 50",
static struct fb_videomode __initdata lb104v03_modes[] = {
{
.name = "640x480 @ 50",
at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
at32_add_device_usba(0, NULL);
at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);
at32_add_device_usba(0, NULL);
at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/atmel-mci.h>
#include <linux/clk.h>
#include <linux/fb.h>
#include <linux/etherdevice.h>
#include <linux/clk.h>
#include <linux/fb.h>
#include <linux/etherdevice.h>
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+
struct eth_addr {
u8 addr[6];
};
struct eth_addr {
u8 addr[6];
};
#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA
at32_add_device_hh_fpga();
#endif
#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA
at32_add_device_hh_fpga();
#endif
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#ifdef CONFIG_BOARD_HAMMERHEAD_USB
at32_add_device_usba(0, NULL);
#ifdef CONFIG_BOARD_HAMMERHEAD_USB
at32_add_device_usba(0, NULL);