-.align 2
-ENTRY(_cache_invalidate)
-
- /*
- * Icache or DcacheA or DcacheB Invalidation
- * or any combination thereof
- * R0 has bits
- * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P
- * set as required
- */
- [--SP] = R7;
-
- R7 = R0;
- CC = BITTST(R7,CPLB_ENABLE_ICACHE_P);
- IF !CC JUMP .Lno_icache;
- [--SP] = RETS;
- CALL _icache_invalidate;
- RETS = [SP++];
-.Lno_icache:
- CC = BITTST(R7,CPLB_ENABLE_DCACHE_P);
- IF !CC JUMP .Lno_dcache_a;
- R0 = 0; /* specifies bank A */
- [--SP] = RETS;
- CALL _dcache_invalidate;
- RETS = [SP++];
-.Lno_dcache_a:
- CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P);
- IF !CC JUMP .Lno_dcache_b;
- R0 = 0;
- BITSET(R0, 23); /* specifies bank B */
- [--SP] = RETS;
- CALL _dcache_invalidate;
- RETS = [SP++];
-.Lno_dcache_b:
- R7 = [SP++];
- RTS;
-ENDPROC(_cache_invalidate)
-
-/* Invalidate the Entire Instruction cache by
- * disabling IMC bit
- */
-ENTRY(_icache_invalidate)
-ENTRY(_invalidate_entire_icache)
- [--SP] = ( R7:5);
-
- P0.L = LO(IMEM_CONTROL);
- P0.H = HI(IMEM_CONTROL);
- R7 = [P0];
-
- /* Clear the IMC bit , All valid bits in the instruction
- * cache are set to the invalid state
- */
- BITCLR(R7,IMC_P);
- CLI R6;
- SSYNC; /* SSYNC required before invalidating cache. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- /* Configures the instruction cache agian */
- R6 = (IMC | ENICPLB);
- R7 = R7 | R6;
-
- CLI R6;
- SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- ( R7:5) = [SP++];
- RTS;
-ENDPROC(_invalidate_entire_icache)
-ENDPROC(_icache_invalidate)