+/*
+ * linux/arch/arm/mach-omap2/board-3430sdp-flash.c
+ *
+ * Copyright (c) 2007 Texas Instruments
+ *
+ * Modified from mach-omap2/board-2430sdp-flash.c
+ * Author: Rohit Choraria <rohitkc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+#include <asm/arch/onenand.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpmc.h>
+
+static struct mtd_partition sdp_nor_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "Bootloader-NOR",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "Params-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "Kernel-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "Filesystem-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data sdp_nor_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = sdp_nor_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+};
+
+static struct resource sdp_nor_resource = {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nor_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdp_nor_data,
+ },
+ .num_resources = 1,
+ .resource = &sdp_nor_resource,
+};
+
+static int sdp_onenand_setup(void __iomem *);
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+ {
+ .name = "X-Loader-OneNAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot Environment-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * (64 * 2048),
+ },
+ {
+ .name = "Kernel-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16 * (64 * 2048),
+ },
+ {
+ .name = "File System-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data sdp_onenand_data = {
+ .parts = sdp_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+ .onenand_setup = sdp_onenand_setup,
+ .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device sdp_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+ .dev = {
+ .platform_data = &sdp_onenand_data,
+ },
+};
+
+/*
+ * sdp_onenand_setup - The function configures the onenand flash.
+ * @onenand_base: Onenand base address
+ *
+ * @return int: Currently always returning zero.
+ */
+static int sdp_onenand_setup(void __iomem *onenand_base)
+{
+ /* Onenand setup does nothing at present */
+ return 0;
+}
+/**
+ * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ *
+ * @return - void.
+ */
+void __init sdp3430_flash_init(void)
+{
+ u8 cs = 0;
+ u8 onenandcs = GPMC_CS_NUM + 1;
+
+ /* Configure start address and size of NOR device */
+ if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0)) {
+ sdp_nor_resource.start = FLASH_BASE_SDPV2;
+ sdp_nor_resource.end = FLASH_BASE_SDPV2
+ + FLASH_SIZE_SDPV2 - 1;
+ } else {
+ sdp_nor_resource.start = FLASH_BASE_SDPV1;
+ sdp_nor_resource.end = FLASH_BASE_SDPV1
+ + FLASH_SIZE_SDPV1 - 1;
+ }
+
+ if (platform_device_register(&sdp_nor_device) < 0)
+ printk(KERN_ERR "Unable to register NOR device\n");
+
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+
+ /*
+ * xloader/Uboot would have programmed the oneNAND
+ * base address for us This is a ugly hack. The proper
+ * way of doing this is to pass the setup of u-boot up
+ * to kernel using kernel params - something on the
+ * lines of machineID. Check if oneNAND is configured
+ */
+ if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+ onenandcs = cs;
+ cs++;
+ }
+ if (onenandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "OneNAND: Unable to find configuration "
+ " in GPMC\n ");
+ return;
+ }
+
+ if (onenandcs < GPMC_CS_NUM) {
+ sdp_onenand_data.cs = onenandcs;
+ if (platform_device_register(&sdp_onenand_device) < 0)
+ printk(KERN_ERR "Unable to register OneNAND device\n");
+ }
+}