X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fleds%2FKconfig;h=e7fb7d2fcbfc4792abc91993337620a562a3323c;hb=ea541686d8454efac4f2b5c0767affb12d4b6a52;hp=5b14262af0178797e174c7355680271d3ec04758;hpb=620f2efcdc5c7a2db68da41bc3df3cf9a718024e;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 5b14262af01..e7fb7d2fcbf 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -82,6 +82,14 @@ config LEDS_COBALT_RAQ
 	help
 	  This option enables support for the Cobalt Raq series LEDs.
 
+config LEDS_SUNFIRE
+	tristate "LED support for SunFire servers."
+	depends on LEDS_CLASS && SPARC64
+	select LEDS_TRIGGERS
+	help
+	  This option enables support for the Left, Middle, and Right
+	  LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
+
 config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
 	depends on LEDS_CLASS && SH_HP6XX
@@ -105,11 +113,12 @@ config LEDS_GPIO
 	  outputs. To be useful the particular board must have LEDs
 	  and they must be connected to the GPIO lines.
 
-config LEDS_CM_X270
-	tristate "LED Support for the CM-X270 LEDs"
-	depends on LEDS_CLASS && MACH_ARMCORE
+config LEDS_HP_DISK
+	tristate "LED Support for disk protection LED on HP notebooks"
+	depends on LEDS_CLASS && ACPI
 	help
-	  This option enables support for the CM-X270 LEDs.
+	  This option enable support for disk protection LED, found on
+	  newer HP notebooks.
 
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
@@ -149,6 +158,13 @@ config LEDS_PCA955X
 	  LED driver chips accessed via the I2C bus.  Supported
 	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 
+config LEDS_DA903X
+	tristate "LED Support for DA9030/DA9034 PMIC"
+	depends on LEDS_CLASS && PMIC_DA903X
+	help
+	  This option enables support for on-chip LED drivers found
+	  on Dialog Semiconductor DA9030/DA9034 PMICs.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
@@ -171,7 +187,7 @@ config LEDS_TRIGGER_TIMER
 
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
-	depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
+	depends on LEDS_TRIGGERS && IDE_GD_ATA
 	help
 	  This allows LEDs to be controlled by IDE disk activity.
 	  If unsure, say Y.
@@ -185,6 +201,15 @@ config LEDS_TRIGGER_HEARTBEAT
 	  load average.
 	  If unsure, say Y.
 
+config LEDS_TRIGGER_BACKLIGHT
+	tristate "LED backlight Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled as a backlight device: they
+	  turn off and on when the display is blanked and unblanked.
+
+	  If unsure, say N.
+
 config LEDS_TRIGGER_DEFAULT_ON
 	tristate "LED Default ON Trigger"
 	depends on LEDS_TRIGGERS