X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Ftsc.c;h=599e58168631e22e5ff69e15c365273bd2f9b03c;hb=fa623d1b0222adbe8f822e53c08003b9679a410c;hp=424093b157d363dcad0bb58b8ed08636a9e0b61e;hpb=ecbf29cdb3990c83d90d0c4187c89fb2ce423367;p=linux-2.6-omap-h63xx.git

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 424093b157d..599e5816863 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -15,6 +15,7 @@
 #include <asm/vgtod.h>
 #include <asm/time.h>
 #include <asm/delay.h>
+#include <asm/hypervisor.h>
 
 unsigned int cpu_khz;           /* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
@@ -31,6 +32,7 @@ static int tsc_unstable;
    erroneous rdtsc usage on !cpu_has_tsc processors */
 static int tsc_disabled = -1;
 
+static int tsc_clocksource_reliable;
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
@@ -98,6 +100,15 @@ int __init notsc_setup(char *str)
 
 __setup("notsc", notsc_setup);
 
+static int __init tsc_setup(char *str)
+{
+	if (!strcmp(str, "reliable"))
+		tsc_clocksource_reliable = 1;
+	return 1;
+}
+
+__setup("tsc=", tsc_setup);
+
 #define MAX_RETRIES     5
 #define SMI_TRESHOLD    50000
 
@@ -352,9 +363,15 @@ unsigned long native_calibrate_tsc(void)
 {
 	u64 tsc1, tsc2, delta, ref1, ref2;
 	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
-	unsigned long flags, latch, ms, fast_calibrate;
+	unsigned long flags, latch, ms, fast_calibrate, tsc_khz;
 	int hpet = is_hpet_enabled(), i, loopmin;
 
+	tsc_khz = get_hypervisor_tsc_freq();
+	if (tsc_khz) {
+		printk(KERN_INFO "TSC: Frequency read from the hypervisor\n");
+		return tsc_khz;
+	}
+
 	local_irq_save(flags);
 	fast_calibrate = quick_pit_calibrate();
 	local_irq_restore(flags);
@@ -731,24 +748,21 @@ static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
 	{}
 };
 
-/*
- * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
- */
+static void __init check_system_tsc_reliable(void)
+{
 #ifdef CONFIG_MGEODE_LX
-/* RTSC counts during suspend */
+	/* RTSC counts during suspend */
 #define RTSC_SUSP 0x100
-
-static void __init check_geode_tsc_reliable(void)
-{
 	unsigned long res_low, res_high;
 
 	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
+	/* Geode_LX - the OLPC CPU has a possibly a very reliable TSC */
 	if (res_low & RTSC_SUSP)
-		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
-}
-#else
-static inline void check_geode_tsc_reliable(void) { }
+		tsc_clocksource_reliable = 1;
 #endif
+	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
+		tsc_clocksource_reliable = 1;
+}
 
 /*
  * Make an educated guess if the TSC is trustworthy and synchronized
@@ -783,6 +797,8 @@ static void __init init_tsc_clocksource(void)
 {
 	clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
 			clocksource_tsc.shift);
+	if (tsc_clocksource_reliable)
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
 	/* lower the rating if we already know its unstable: */
 	if (check_tsc_unstable()) {
 		clocksource_tsc.rating = 0;
@@ -843,7 +859,7 @@ void __init tsc_init(void)
 	if (unsynchronized_tsc())
 		mark_tsc_unstable("TSCs unsynchronized");
 
-	check_geode_tsc_reliable();
+	check_system_tsc_reliable();
 	init_tsc_clocksource();
 }