X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap2%2Fboard-omap3beagle.c;h=19702c74955d97ac4cbe2921c512e29e8c0b56e5;hb=85c0074e097432263d4ad5bba44b9026aa7bda4b;hp=093150c97c001916a9faddde912dd6450aabf5c7;hpb=d4f127fe2c86f71350b23e518a6a888a079ba879;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 093150c97c0..19702c74955 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -43,6 +43,7 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 #include <mach/nand.h>
+#include <mach/mux.h>
 
 
 #define GPMC_CS0_BASE  0x60
@@ -291,7 +292,17 @@ static void __init omap3_beagle_init(void)
 	omap_board_config = omap3_beagle_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
+
+	omap_cfg_reg(AH8_34XX_GPIO29);
+	gpio_request(29, "mmc0_wp");
+	gpio_direction_input(29);
 	hsmmc_init();
+
+	omap_cfg_reg(J25_34XX_GPIO170);
+	gpio_request(170, "DVI_nPD");
+	/* REVISIT leave DVI powered down until it's needed ... */
+	gpio_direction_output(170, true);
+
 	usb_musb_init();
 	usb_ehci_init();
 	omap3beagle_flash_init();