X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-at91%2Fboard-sam9263ek.c;h=f57458559fb66da229df4273f2aebf56f79739dd;hb=93afa75230f5969d559386e52819f54bb1182327;hp=81d3d6a0a86aa217cef2c367dd85626effd0f1a8;hpb=03abeac0a222060ae8f02e8359c285df0971437e;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 81d3d6a0a86..f57458559fb 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -156,6 +156,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 };
 
 
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.is_rmii	= 1,
+};
+
+
 /*
  * NAND flash
  */
@@ -193,6 +201,14 @@ static struct at91_nand_data __initdata ek_nand_data = {
 };
 
 
+/*
+ * AC97
+ */
+static struct atmel_ac97_data ek_ac97_data = {
+	.reset_pin	= AT91_PIN_PA13,
+};
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -208,8 +224,14 @@ static void __init ek_board_init(void)
 	ek_add_device_ts();
 	/* MMC */
 	at91_add_device_mmc(1, &ek_mmc_data);
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")