X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-at91%2Fboard-csb337.c;h=0e2a11fc5bbd587315b0a6f0a78d8ee3ef31dc25;hb=1b41bdf68a72c1fd506ee3dbfbf954fd2eaef75c;hp=51cb3c8cc601a347967e280ec50eaa26e5388e2d;hpb=2743f0c1dcca54d6c80b0de1273b3f4e90051a85;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 51cb3c8cc60..0e2a11fc5bb 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -215,6 +215,28 @@ static void __init csb300_add_device_buttons(void)
 static void __init csb300_add_device_buttons(void) {}
 #endif
 
+static struct gpio_led csb_leds[] = {
+	{	/* "led0", yellow */
+		.name			= "led0",
+		.gpio			= AT91_PIN_PB2,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* "led1", green */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PB1,
+		.active_low		= 1,
+		.default_trigger	= "mmc0",
+	},
+	{	/* "led2", yellow */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PB0,
+		.active_low		= 1,
+		.default_trigger	= "ide-disk",
+	},
+};
+
+
 static void __init csb337_board_init(void)
 {
 	/* Serial */
@@ -236,6 +258,8 @@ static void __init csb337_board_init(void)
 	at91_add_device_mmc(0, &csb337_mmc_data);
 	/* NOR flash */
 	platform_device_register(&csb_flash);
+	/* LEDs */
+	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
 	/* Switches on CSB300 */
 	csb300_add_device_buttons();
 }