ALSA: hda - Add missing terminators in patch_sigmatel.c

[linux-2.6-omap-h63xx.git] / sound / pci / hda / patch_sigmatel.c

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5dd3e89f620a2753511097d1fe86b4e6673afefa..b77f330d2650b7c13d23d1d0f84d9344d973940a 100644 (file)
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -69,6 +69,7 @@ enum {
 };
 
 enum {
+       STAC_92HD73XX_NO_JD, /* no jack-detection */
        STAC_92HD73XX_REF,
        STAC_DELL_M6_AMIC,
        STAC_DELL_M6_DMIC,
@@ -127,6 +128,7 @@ enum {
 };
 
 enum {
+       STAC_D965_REF_NO_JD, /* no jack-detection */
        STAC_D965_REF,
        STAC_D965_3ST,
        STAC_D965_5ST,
@@ -857,6 +859,7 @@ static struct hda_verb stac92hd83xxx_core_init[] = {
 
        /* power state controls amps */
        { 0x01, AC_VERB_SET_EAPD, 1 << 2},
+       {}
 };
 
 static struct hda_verb stac92hd71bxx_core_init[] = {
@@ -868,6 +871,7 @@ static struct hda_verb stac92hd71bxx_core_init[] = {
        { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
        { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
        { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+       {}
 };
 
 #define HD_DISABLE_PORTF 2
@@ -1611,6 +1615,7 @@ static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
 };
 
 static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
+       [STAC_92HD73XX_NO_JD] = "no-jd",
        [STAC_92HD73XX_REF] = "ref",
        [STAC_DELL_M6_AMIC] = "dell-m6-amic",
        [STAC_DELL_M6_DMIC] = "dell-m6-dmic",
@@ -1640,6 +1645,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
                                "unknown Dell", STAC_DELL_M6_DMIC),
        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
                                "Dell Studio 1537", STAC_DELL_M6_DMIC),
+       SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
+                               "Dell Studio 17", STAC_DELL_M6_DMIC),
        {} /* terminator */
 };
 
@@ -1662,6 +1669,7 @@ static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
        /* SigmaTel reference board */
        SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
                      "DFI LanParty", STAC_92HD71BXX_REF),
+       {} /* terminator */
 };
 
 static unsigned int ref92hd71bxx_pin_configs[11] = {
@@ -2027,6 +2035,7 @@ static unsigned int dell_3st_pin_configs[14] = {
 };
 
 static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
+       [STAC_D965_REF_NO_JD] = ref927x_pin_configs,
        [STAC_D965_REF]  = ref927x_pin_configs,
        [STAC_D965_3ST]  = d965_3st_pin_configs,
        [STAC_D965_5ST]  = d965_5st_pin_configs,
@@ -2035,6 +2044,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
 };
 
 static const char *stac927x_models[STAC_927X_MODELS] = {
+       [STAC_D965_REF_NO_JD]   = "ref-no-jd",
        [STAC_D965_REF]         = "ref",
        [STAC_D965_3ST]         = "3stack",
        [STAC_D965_5ST]         = "5stack",
@@ -2896,7 +2906,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
        }
 
        if ((spec->multiout.num_dacs - cfg->line_outs) > 0 &&
-                       cfg->hp_outs && !spec->multiout.hp_nid)
+           cfg->hp_outs == 1 && !spec->multiout.hp_nid)
                spec->multiout.hp_nid = nid;
 
        if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
@@ -4254,14 +4264,17 @@ again:
 
        switch (spec->multiout.num_dacs) {
        case 0x3: /* 6 Channel */
+               spec->multiout.hp_nid = 0x17;
                spec->mixer = stac92hd73xx_6ch_mixer;
                spec->init = stac92hd73xx_6ch_core_init;
                break;
        case 0x4: /* 8 Channel */
+               spec->multiout.hp_nid = 0x18;
                spec->mixer = stac92hd73xx_8ch_mixer;
                spec->init = stac92hd73xx_8ch_core_init;
                break;
        case 0x5: /* 10 Channel */
+               spec->multiout.hp_nid = 0x19;
                spec->mixer = stac92hd73xx_10ch_mixer;
                spec->init = stac92hd73xx_10ch_core_init;
        };
@@ -4297,6 +4310,7 @@ again:
                spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
                spec->eapd_switch = 0;
                spec->num_amps = 1;
+               spec->multiout.hp_nid = 0; /* dual HPs */
 
                if (!spec->init)
                        spec->init = dell_m6_core_init;
@@ -4351,6 +4365,9 @@ again:
                return err;
        }
 
+       if (spec->board_config == STAC_92HD73XX_NO_JD)
+               spec->hp_detect = 0;
+
        codec->patch_ops = stac92xx_patch_ops;
 
        return 0;
@@ -4899,6 +4916,10 @@ static int patch_stac927x(struct hda_codec *codec)
         */
        codec->bus->needs_damn_long_delay = 1;
 
+       /* no jack detecion for ref-no-jd model */
+       if (spec->board_config == STAC_D965_REF_NO_JD)
+               spec->hp_detect = 0;
+
        return 0;
 }