#define RPCB_HIGHPROC_3 RPCBPROC_TADDR2UADDR
#define RPCB_HIGHPROC_4 RPCBPROC_GETSTAT
-/*
- * r_addr
- *
- * Quoting RFC 3530, section 2.2:
- *
- * For TCP over IPv4 and for UDP over IPv4, the format of r_addr is the
- * US-ASCII string:
- *
- * h1.h2.h3.h4.p1.p2
- *
- * The prefix, "h1.h2.h3.h4", is the standard textual form for
- * representing an IPv4 address, which is always four octets long.
- * Assuming big-endian ordering, h1, h2, h3, and h4, are respectively,
- * the first through fourth octets each converted to ASCII-decimal.
- * Assuming big-endian ordering, p1 and p2 are, respectively, the first
- * and second octets each converted to ASCII-decimal. For example, if a
- * host, in big-endian order, has an address of 0x0A010307 and there is
- * a service listening on, in big endian order, port 0x020F (decimal
- * 527), then the complete universal address is "10.1.3.7.2.15".
- *
- * ...
- *
- * For TCP over IPv6 and for UDP over IPv6, the format of r_addr is the
- * US-ASCII string:
- *
- * x1:x2:x3:x4:x5:x6:x7:x8.p1.p2
- *
- * The suffix "p1.p2" is the service port, and is computed the same way
- * as with universal addresses for TCP and UDP over IPv4. The prefix,
- * "x1:x2:x3:x4:x5:x6:x7:x8", is the standard textual form for
- * representing an IPv6 address as defined in Section 2.2 of [RFC2373].
- * Additionally, the two alternative forms specified in Section 2.2 of
- * [RFC2373] are also acceptable.
- *
- * XXX: Currently this implementation does not explicitly convert the
- * stored address to US-ASCII on non-ASCII systems.
- */
-#define RPCB_MAXADDRLEN (128u)
-
/*
* r_owner
*
u32 r_vers;
u32 r_prot;
unsigned short r_port;
- char * r_netid;
- char r_addr[RPCB_MAXADDRLEN];
- char * r_owner;
+ const char * r_netid;
+ const char * r_addr;
+ const char * r_owner;
};
static struct rpc_procinfo rpcb_procedures2[];
static struct rpcb_info rpcb_next_version[];
static struct rpcb_info rpcb_next_version6[];
-static void rpcb_getport_prepare(struct rpc_task *task, void *calldata)
-{
- struct rpcbind_args *map = calldata;
- struct rpc_xprt *xprt = map->r_xprt;
- struct rpc_message msg = {
- .rpc_proc = rpcb_next_version[xprt->bind_index].rpc_proc,
- .rpc_argp = map,
- .rpc_resp = &map->r_port,
- };
-
- rpc_call_setup(task, &msg, 0);
-}
-
static void rpcb_map_release(void *data)
{
struct rpcbind_args *map = data;
}
static const struct rpc_call_ops rpcb_getport_ops = {
- .rpc_call_prepare = rpcb_getport_prepare,
.rpc_call_done = rpcb_getport_done,
.rpc_release = rpcb_map_release,
};
}
static struct rpc_clnt *rpcb_create(char *hostname, struct sockaddr *srvaddr,
- int proto, int version, int privileged)
+ size_t salen, int proto, u32 version,
+ int privileged)
{
struct rpc_create_args args = {
.protocol = proto,
.address = srvaddr,
- .addrsize = sizeof(struct sockaddr_in),
+ .addrsize = salen,
.servername = hostname,
.program = &rpcb_program,
.version = version,
prog, vers, prot, port);
rpcb_clnt = rpcb_create("localhost", (struct sockaddr *) &sin,
- XPRT_TRANSPORT_UDP, 2, 1);
+ sizeof(sin), XPRT_TRANSPORT_UDP, 2, 1);
if (IS_ERR(rpcb_clnt))
return PTR_ERR(rpcb_clnt);
* @vers: RPC version number to bind
* @prot: transport protocol to use to make this request
*
+ * Return value is the requested advertised port number,
+ * or a negative errno value.
+ *
* Called from outside the RPC client in a synchronous task context.
* Uses default timeout parameters specified by underlying transport.
*
- * XXX: Needs to support IPv6, and rpcbind versions 3 and 4
+ * XXX: Needs to support IPv6
*/
-int rpcb_getport_sync(struct sockaddr_in *sin, __u32 prog,
- __u32 vers, int prot)
+int rpcb_getport_sync(struct sockaddr_in *sin, u32 prog, u32 vers, int prot)
{
struct rpcbind_args map = {
.r_prog = prog,
.rpc_resp = &map.r_port,
};
struct rpc_clnt *rpcb_clnt;
- char hostname[40];
int status;
dprintk("RPC: %s(" NIPQUAD_FMT ", %u, %u, %d)\n",
__FUNCTION__, NIPQUAD(sin->sin_addr.s_addr), prog, vers, prot);
- sprintf(hostname, NIPQUAD_FMT, NIPQUAD(sin->sin_addr.s_addr));
- rpcb_clnt = rpcb_create(hostname, (struct sockaddr *)sin, prot, 2, 0);
+ rpcb_clnt = rpcb_create(NULL, (struct sockaddr *)sin,
+ sizeof(*sin), prot, 2, 0);
if (IS_ERR(rpcb_clnt))
return PTR_ERR(rpcb_clnt);
}
EXPORT_SYMBOL_GPL(rpcb_getport_sync);
+static struct rpc_task *rpcb_call_async(struct rpc_clnt *rpcb_clnt, struct rpcbind_args *map, int version)
+{
+ struct rpc_message msg = {
+ .rpc_proc = rpcb_next_version[version].rpc_proc,
+ .rpc_argp = map,
+ .rpc_resp = &map->r_port,
+ };
+ struct rpc_task_setup task_setup_data = {
+ .rpc_client = rpcb_clnt,
+ .rpc_message = &msg,
+ .callback_ops = &rpcb_getport_ops,
+ .callback_data = map,
+ .flags = RPC_TASK_ASYNC,
+ };
+
+ return rpc_run_task(&task_setup_data);
+}
+
/**
* rpcb_getport_async - obtain the port for a given RPC service on a given host
* @task: task that is waiting for portmapper request
void rpcb_getport_async(struct rpc_task *task)
{
struct rpc_clnt *clnt = task->tk_client;
- int bind_version;
+ u32 bind_version;
struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_clnt *rpcb_clnt;
static struct rpcbind_args *map;
struct rpc_task *child;
- struct sockaddr addr;
+ struct sockaddr_storage addr;
+ struct sockaddr *sap = (struct sockaddr *)&addr;
+ size_t salen;
int status;
struct rpcb_info *info;
goto bailout_nofree;
}
- rpc_peeraddr(clnt, (void *)&addr, sizeof(addr));
+ salen = rpc_peeraddr(clnt, sap, sizeof(addr));
/* Don't ever use rpcbind v2 for AF_INET6 requests */
- switch (addr.sa_family) {
+ switch (sap->sa_family) {
case AF_INET:
info = rpcb_next_version;
break;
dprintk("RPC: %5u %s: trying rpcbind version %u\n",
task->tk_pid, __FUNCTION__, bind_version);
- rpcb_clnt = rpcb_create(clnt->cl_server, &addr, xprt->prot,
+ rpcb_clnt = rpcb_create(clnt->cl_server, sap, salen, xprt->prot,
bind_version, 0);
if (IS_ERR(rpcb_clnt)) {
status = PTR_ERR(rpcb_clnt);
map->r_port = 0;
map->r_xprt = xprt_get(xprt);
map->r_netid = rpc_peeraddr2str(clnt, RPC_DISPLAY_NETID);
- memcpy(map->r_addr,
- rpc_peeraddr2str(rpcb_clnt, RPC_DISPLAY_UNIVERSAL_ADDR),
- sizeof(map->r_addr));
+ map->r_addr = rpc_peeraddr2str(rpcb_clnt, RPC_DISPLAY_UNIVERSAL_ADDR);
map->r_owner = RPCB_OWNER_STRING; /* ignored for GETADDR */
- child = rpc_run_task(rpcb_clnt, RPC_TASK_ASYNC, &rpcb_getport_ops, map);
+ child = rpcb_call_async(rpcb_clnt, map, xprt->bind_index);
rpc_release_client(rpcb_clnt);
if (IS_ERR(child)) {
status = -EIO;
* Simple sanity check. The smallest possible universal
* address is an IPv4 address string containing 11 bytes.
*/
- if (addr_len < 11 || addr_len > RPCB_MAXADDRLEN)
+ if (addr_len < 11 || addr_len > RPCBIND_MAXUADDRLEN)
goto out_err;
/*
#define RPCB_boolean_sz (1u)
#define RPCB_netid_sz (1+XDR_QUADLEN(RPCBIND_MAXNETIDLEN))
-#define RPCB_addr_sz (1+XDR_QUADLEN(RPCB_MAXADDRLEN))
+#define RPCB_addr_sz (1+XDR_QUADLEN(RPCBIND_MAXUADDRLEN))
#define RPCB_ownerstring_sz (1+XDR_QUADLEN(RPCB_MAXOWNERLEN))
#define RPCB_mappingargs_sz RPCB_program_sz+RPCB_version_sz+ \
projects / linux-2.6-omap-h63xx.git / blobdiff