ssb: Remove the old, now unused, data structures

[linux-2.6-omap-h63xx.git] / include / linux / ssb / ssb_regs.h

diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 96bba69b1271ce588b8d95f4aafe0650aa101ef5..30222e89ad16a0bc885202bfc3c37bb219717318 100644 (file)
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -175,6 +175,7 @@
 #define  SSB_SPROM_REVISION_REV                0x00FF  /* SPROM Revision number */
 #define  SSB_SPROM_REVISION_CRC                0xFF00  /* SPROM CRC8 value */
 #define  SSB_SPROM_REVISION_CRC_SHIFT  8
+
 /* SPROM Revision 1 */
 #define SSB_SPROM1_SPID                        0x1004  /* Subsystem Product ID for PCI */
 #define SSB_SPROM1_SVID                        0x1006  /* Subsystem Vendor ID for PCI */
@@ -223,7 +224,7 @@
 #define  SSB_SPROM1_AGAIN_A            0x00FF  /* A-PHY */
 #define  SSB_SPROM1_AGAIN_BG           0xFF00  /* B-PHY and G-PHY */
 #define  SSB_SPROM1_AGAIN_BG_SHIFT     8
-#define SSB_SPROM1_OEM                 0x1076  /* 8 bytes OEM string (rev 1 only) */
+
 /* SPROM Revision 2 (inherits from rev 1) */
 #define SSB_SPROM2_BFLHI               0x1038  /* Boardflags (high 16 bits) */
 #define SSB_SPROM2_MAXP_A              0x103A  /* A-PHY Max Power */
@@ -240,6 +241,7 @@
 #define  SSB_SPROM2_OPO_VALUE          0x00FF
 #define  SSB_SPROM2_OPO_UNUSED         0xFF00
 #define SSB_SPROM2_CCODE               0x107C  /* Two char Country Code */
+
 /* SPROM Revision 3 (inherits most data from rev 2) */
 #define SSB_SPROM3_IL0MAC              0x104A  /* 6 bytes MAC address for 802.11b/g */
 #define SSB_SPROM3_ET0MAC              0x1050  /* 6 bytes MAC address for Ethernet ?? */
@@ -261,11 +263,12 @@
 #define  SSB_SPROM3_CCKPO_11M          0xF000  /* 11M Rate PO */
 #define  SSB_SPROM3_CCKPO_11M_SHIFT    12
 #define  SSB_SPROM3_OFDMGPO            0x107A  /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
 /* SPROM Revision 4            entries with ?? in comment are unknown */
-#define SSB_SPROM4_IL0MAC              0x104C  /* 6 byte MAC address for b/g */
+#define SSB_SPROM4_IL0MAC              0x104C  /* 6 byte MAC address for a/b/g/n */
 #define SSB_SPROM4_ET0MAC              0x1018  /* 6 bytes MAC address for Ethernet ?? */
 #define SSB_SPROM4_ET1MAC              0x1018  /* 6 bytes MAC address for 802.11a ?? */
-#define SSB_SPROM4_ETHPHY              0x105A  /* Ethernet PHY settings */
+#define SSB_SPROM4_ETHPHY              0x105A  /* Ethernet PHY settings ?? */
 #define  SSB_SPROM4_ETHPHY_ET0A                0x001F  /* MII Address for enet0 */
 #define  SSB_SPROM4_ETHPHY_ET1A                0x03E0  /* MII Address for enet1 */
 #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT  5
@@ -280,24 +283,28 @@
 #define  SSB_SPROM4_AGAIN_1            0xFF00  /* Antenna 1 */
 #define  SSB_SPROM4_AGAIN_1_SHIFT      8
 #define SSB_SPROM4_BFLHI               0x1046  /* Board Flags Hi */
-#define SSB_SPROM4_MAXP_A              0x1000  /* Max Power A ?? */
-#define SSB_SPROM4_MAXP_A_HI           0x00FF  /* Mask for Hi */
-#define SSB_SPROM4_MAXP_A_LO           0xFF00  /* Mask for Lo */
-#define SSB_SPROM4_MAXP_A_LO_SHIFT     16      /* Shift for Lo */
-#define SSB_SPROM4_PA1LOB0             0x1000  /* ?? */
-#define SSB_SPROM4_PA1LOB1             0x1000  /* ?? */
-#define SSB_SPROM4_PA1LOB2             0x1000  /* ?? */
-#define SSB_SPROM4_PA1HIB0             0x1000  /* ?? */
-#define SSB_SPROM4_PA1HIB1             0x1000  /* ?? */
-#define SSB_SPROM4_PA1HIB2             0x1000  /* ?? */
-#define SSB_SPROM4_OPO                 0x1000  /* ?? */
-#define SSB_SPROM4_OPO_VALUE           0x0000  /* ?? */
-#define SSB_SPROM4_GPIOLDC             0x105A  /* LED Powersave Duty Cycle */
-#define  SSB_SPROM4_GPIOLDC_OFF                0x0000FF00      /* Off Count */
-#define  SSB_SPROM4_GPIOLDC_OFF_SHIFT  8
-#define  SSB_SPROM4_GPIOLDC_ON         0x00FF0000      /* On Count */
-#define  SSB_SPROM4_GPIOLDC_ON_SHIFT   16
-
+#define SSB_SPROM4_MAXP_BG             0x1080  /* Max Power BG in path 1 */
+#define  SSB_SPROM4_MAXP_BG_MASK       0x00FF  /* Mask for Max Power BG */
+#define  SSB_SPROM4_ITSSI_BG           0xFF00  /* Mask for path 1 itssi_bg */
+#define  SSB_SPROM4_ITSSI_BG_SHIFT     8
+#define SSB_SPROM4_MAXP_A              0x108A  /* Max Power A in path 1 */
+#define  SSB_SPROM4_MAXP_A_MASK                0x00FF  /* Mask for Max Power A */
+#define  SSB_SPROM4_ITSSI_A            0xFF00  /* Mask for path 1 itssi_a */
+#define  SSB_SPROM4_ITSSI_A_SHIFT      8
+#define SSB_SPROM4_GPIOA               0x1056  /* Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM4_GPIOA_P0           0x00FF  /* Pin 0 */
+#define  SSB_SPROM4_GPIOA_P1           0xFF00  /* Pin 1 */
+#define  SSB_SPROM4_GPIOA_P1_SHIFT     8
+#define SSB_SPROM4_GPIOB               0x1058  /* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM4_GPIOB_P2           0x00FF  /* Pin 2 */
+#define  SSB_SPROM4_GPIOB_P3           0xFF00  /* Pin 3 */
+#define  SSB_SPROM4_GPIOB_P3_SHIFT     8
+#define SSB_SPROM4_PA0B0               0x1082  /* The paXbY locations are */
+#define SSB_SPROM4_PA0B1               0x1084  /*   only guesses */
+#define SSB_SPROM4_PA0B2               0x1086
+#define SSB_SPROM4_PA1B0               0x108E
+#define SSB_SPROM4_PA1B1               0x1090
+#define SSB_SPROM4_PA1B2               0x1092
 
 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {