* @queue_mapping: Queue mapping for multiqueue devices
* @tc_index: Traffic control index
* @tc_verd: traffic control verdict
+ * @ndisc_nodetype: router type (from link layer)
+ * @do_not_encrypt: set to prevent encryption of this frame
* @dma_cookie: a cookie to one of several possible DMA operations
* done by skb DMA functions
* @secmark: security marking
+ * @vlan_tci: vlan tag control information
*/
struct sk_buff {
ktime_t tstamp;
struct net_device *dev;
- struct dst_entry *dst;
+ union {
+ struct dst_entry *dst;
+ struct rtable *rtable;
+ };
struct sec_path *sp;
/*
#endif
int iif;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
__u16 queue_mapping;
-#endif
#ifdef CONFIG_NET_SCHED
__u16 tc_index; /* traffic control index */
#ifdef CONFIG_NET_CLS_ACT
__u16 tc_verd; /* traffic control verdict */
#endif
#endif
- /* 2 byte hole */
+#ifdef CONFIG_IPV6_NDISC_NODETYPE
+ __u8 ndisc_nodetype:2;
+#endif
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+ __u8 do_not_encrypt:1;
+#endif
+ /* 0/13/14 bit hole */
#ifdef CONFIG_NET_DMA
dma_cookie_t dma_cookie;
__u32 mark;
+ __u16 vlan_tci;
+
sk_buff_data_t transport_header;
sk_buff_data_t network_header;
sk_buff_data_t mac_header;
}
/*
- * Insert an sk_buff at the start of a list.
+ * Insert an sk_buff on a list.
*
* The "__skb_xxxx()" functions are the non-atomic ones that
* can only be called with interrupts disabled.
*/
+extern void skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list);
+static inline void __skb_insert(struct sk_buff *newsk,
+ struct sk_buff *prev, struct sk_buff *next,
+ struct sk_buff_head *list)
+{
+ newsk->next = next;
+ newsk->prev = prev;
+ next->prev = prev->next = newsk;
+ list->qlen++;
+}
/**
* __skb_queue_after - queue a buffer at the list head
struct sk_buff *prev,
struct sk_buff *newsk)
{
- struct sk_buff *next;
- list->qlen++;
+ __skb_insert(newsk, prev, prev->next, list);
+}
- next = prev->next;
- newsk->next = next;
- newsk->prev = prev;
- next->prev = prev->next = newsk;
+extern void skb_append(struct sk_buff *old, struct sk_buff *newsk,
+ struct sk_buff_head *list);
+
+static inline void __skb_queue_before(struct sk_buff_head *list,
+ struct sk_buff *next,
+ struct sk_buff *newsk)
+{
+ __skb_insert(newsk, next->prev, next, list);
}
/**
static inline void __skb_queue_tail(struct sk_buff_head *list,
struct sk_buff *newsk)
{
- struct sk_buff *prev, *next;
-
- list->qlen++;
- next = (struct sk_buff *)list;
- prev = next->prev;
- newsk->next = next;
- newsk->prev = prev;
- next->prev = prev->next = newsk;
-}
-
-
-/**
- * __skb_dequeue - remove from the head of the queue
- * @list: list to dequeue from
- *
- * Remove the head of the list. This function does not take any locks
- * so must be used with appropriate locks held only. The head item is
- * returned or %NULL if the list is empty.
- */
-extern struct sk_buff *skb_dequeue(struct sk_buff_head *list);
-static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list)
-{
- struct sk_buff *next, *prev, *result;
-
- prev = (struct sk_buff *) list;
- next = prev->next;
- result = NULL;
- if (next != prev) {
- result = next;
- next = next->next;
- list->qlen--;
- next->prev = prev;
- prev->next = next;
- result->next = result->prev = NULL;
- }
- return result;
-}
-
-
-/*
- * Insert a packet on a list.
- */
-extern void skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list);
-static inline void __skb_insert(struct sk_buff *newsk,
- struct sk_buff *prev, struct sk_buff *next,
- struct sk_buff_head *list)
-{
- newsk->next = next;
- newsk->prev = prev;
- next->prev = prev->next = newsk;
- list->qlen++;
-}
-
-/*
- * Place a packet after a given packet in a list.
- */
-extern void skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list);
-static inline void __skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list)
-{
- __skb_insert(newsk, old, old->next, list);
+ __skb_queue_before(list, (struct sk_buff *)list, newsk);
}
/*
prev->next = next;
}
-
-/* XXX: more streamlined implementation */
+/**
+ * __skb_dequeue - remove from the head of the queue
+ * @list: list to dequeue from
+ *
+ * Remove the head of the list. This function does not take any locks
+ * so must be used with appropriate locks held only. The head item is
+ * returned or %NULL if the list is empty.
+ */
+extern struct sk_buff *skb_dequeue(struct sk_buff_head *list);
+static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list)
+{
+ struct sk_buff *skb = skb_peek(list);
+ if (skb)
+ __skb_unlink(skb, list);
+ return skb;
+}
/**
* __skb_dequeue_tail - remove from the tail of the queue
/*
* Add data to an sk_buff
*/
+extern unsigned char *skb_put(struct sk_buff *skb, unsigned int len);
static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len)
{
unsigned char *tmp = skb_tail_pointer(skb);
return tmp;
}
-/**
- * skb_put - add data to a buffer
- * @skb: buffer to use
- * @len: amount of data to add
- *
- * This function extends the used data area of the buffer. If this would
- * exceed the total buffer size the kernel will panic. A pointer to the
- * first byte of the extra data is returned.
- */
-static inline unsigned char *skb_put(struct sk_buff *skb, unsigned int len)
-{
- unsigned char *tmp = skb_tail_pointer(skb);
- SKB_LINEAR_ASSERT(skb);
- skb->tail += len;
- skb->len += len;
- if (unlikely(skb->tail > skb->end))
- skb_over_panic(skb, len, current_text_addr());
- return tmp;
-}
-
+extern unsigned char *skb_push(struct sk_buff *skb, unsigned int len);
static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len)
{
skb->data -= len;
return skb->data;
}
-/**
- * skb_push - add data to the start of a buffer
- * @skb: buffer to use
- * @len: amount of data to add
- *
- * This function extends the used data area of the buffer at the buffer
- * start. If this would exceed the total buffer headroom the kernel will
- * panic. A pointer to the first byte of the extra data is returned.
- */
-static inline unsigned char *skb_push(struct sk_buff *skb, unsigned int len)
-{
- skb->data -= len;
- skb->len += len;
- if (unlikely(skb->data<skb->head))
- skb_under_panic(skb, len, current_text_addr());
- return skb->data;
-}
-
+extern unsigned char *skb_pull(struct sk_buff *skb, unsigned int len);
static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len)
{
skb->len -= len;
return skb->data += len;
}
-/**
- * skb_pull - remove data from the start of a buffer
- * @skb: buffer to use
- * @len: amount of data to remove
- *
- * This function removes data from the start of a buffer, returning
- * the memory to the headroom. A pointer to the next data in the buffer
- * is returned. Once the data has been pulled future pushes will overwrite
- * the old data.
- */
-static inline unsigned char *skb_pull(struct sk_buff *skb, unsigned int len)
-{
- return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len);
-}
-
extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta);
static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len)
skb_set_tail_pointer(skb, len);
}
-/**
- * skb_trim - remove end from a buffer
- * @skb: buffer to alter
- * @len: new length
- *
- * Cut the length of a buffer down by removing data from the tail. If
- * the buffer is already under the length specified it is not modified.
- * The skb must be linear.
- */
-static inline void skb_trim(struct sk_buff *skb, unsigned int len)
-{
- if (skb->len > len)
- __skb_trim(skb, len);
-}
-
+extern void skb_trim(struct sk_buff *skb, unsigned int len);
static inline int __pskb_trim(struct sk_buff *skb, unsigned int len)
{
return skb;
}
-/**
- * dev_alloc_skb - allocate an skbuff for receiving
- * @length: length to allocate
- *
- * Allocate a new &sk_buff and assign it a usage count of one. The
- * buffer has unspecified headroom built in. Users should allocate
- * the headroom they think they need without accounting for the
- * built in space. The built in space is used for optimisations.
- *
- * %NULL is returned if there is no free memory. Although this function
- * allocates memory it can be called from an interrupt.
- */
-static inline struct sk_buff *dev_alloc_skb(unsigned int length)
-{
- return __dev_alloc_skb(length, GFP_ATOMIC);
-}
+extern struct sk_buff *dev_alloc_skb(unsigned int length);
extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev,
unsigned int length, gfp_t gfp_mask);
static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
skb->queue_mapping = queue_mapping;
-#endif
}
static inline u16 skb_get_queue_mapping(struct sk_buff *skb)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
return skb->queue_mapping;
-#else
- return 0;
-#endif
}
static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from)
{
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
to->queue_mapping = from->queue_mapping;
-#endif
}
static inline int skb_is_gso(const struct sk_buff *skb)
return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6;
}
+extern void __skb_warn_lro_forwarding(const struct sk_buff *skb);
+
+static inline bool skb_warn_if_lro(const struct sk_buff *skb)
+{
+ /* LRO sets gso_size but not gso_type, whereas if GSO is really
+ * wanted then gso_type will be set. */
+ struct skb_shared_info *shinfo = skb_shinfo(skb);
+ if (shinfo->gso_size != 0 && unlikely(shinfo->gso_type == 0)) {
+ __skb_warn_lro_forwarding(skb);
+ return true;
+ }
+ return false;
+}
+
static inline void skb_forward_csum(struct sk_buff *skb)
{
/* Unfortunately we don't support this one. Any brave souls? */
projects / linux-2.6-omap-h63xx.git / blobdiff