#ifndef _LINUX_SIGNAL_H
#define _LINUX_SIGNAL_H
-#include <linux/list.h>
-#include <linux/spinlock.h>
#include <asm/signal.h>
#include <asm/siginfo.h>
#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- * SA_PROBEIRQ is set by callers when they expect sharing mismatches to occur
- */
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#define SA_PROBEIRQ 0x08000000
-
-/*
- * As above, these correspond to the IORESOURCE_IRQ_* defines in
- * linux/ioport.h to select the interrupt line behaviour. When
- * requesting an interrupt without specifying a SA_TRIGGER, the
- * setting should be assumed to be "as already configured", which
- * may be as per machine or firmware initialisation.
- */
-#define SA_TRIGGER_LOW 0x00000008
-#define SA_TRIGGER_HIGH 0x00000004
-#define SA_TRIGGER_FALLING 0x00000002
-#define SA_TRIGGER_RISING 0x00000001
-#define SA_TRIGGER_MASK (SA_TRIGGER_HIGH|SA_TRIGGER_LOW|\
- SA_TRIGGER_RISING|SA_TRIGGER_FALLING)
+#include <linux/list.h>
+#include <linux/spinlock.h>
/*
* Real Time signals may be queued.
return sig <= _NSIG ? 1 : 0;
}
+extern int next_signal(struct sigpending *pending, sigset_t *mask);
extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
extern long do_sigpending(void __user *, unsigned long);
struct pt_regs;
extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
+extern struct kmem_cache *sighand_cachep;
+
+/*
+ * In POSIX a signal is sent either to a specific thread (Linux task)
+ * or to the process as a whole (Linux thread group). How the signal
+ * is sent determines whether it's to one thread or the whole group,
+ * which determines which signal mask(s) are involved in blocking it
+ * from being delivered until later. When the signal is delivered,
+ * either it's caught or ignored by a user handler or it has a default
+ * effect that applies to the whole thread group (POSIX process).
+ *
+ * The possible effects an unblocked signal set to SIG_DFL can have are:
+ * ignore - Nothing Happens
+ * terminate - kill the process, i.e. all threads in the group,
+ * similar to exit_group. The group leader (only) reports
+ * WIFSIGNALED status to its parent.
+ * coredump - write a core dump file describing all threads using
+ * the same mm and then kill all those threads
+ * stop - stop all the threads in the group, i.e. TASK_STOPPED state
+ *
+ * SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
+ * Other signals when not blocked and set to SIG_DFL behaves as follows.
+ * The job control signals also have other special effects.
+ *
+ * +--------------------+------------------+
+ * | POSIX signal | default action |
+ * +--------------------+------------------+
+ * | SIGHUP | terminate |
+ * | SIGINT | terminate |
+ * | SIGQUIT | coredump |
+ * | SIGILL | coredump |
+ * | SIGTRAP | coredump |
+ * | SIGABRT/SIGIOT | coredump |
+ * | SIGBUS | coredump |
+ * | SIGFPE | coredump |
+ * | SIGKILL | terminate(+) |
+ * | SIGUSR1 | terminate |
+ * | SIGSEGV | coredump |
+ * | SIGUSR2 | terminate |
+ * | SIGPIPE | terminate |
+ * | SIGALRM | terminate |
+ * | SIGTERM | terminate |
+ * | SIGCHLD | ignore |
+ * | SIGCONT | ignore(*) |
+ * | SIGSTOP | stop(*)(+) |
+ * | SIGTSTP | stop(*) |
+ * | SIGTTIN | stop(*) |
+ * | SIGTTOU | stop(*) |
+ * | SIGURG | ignore |
+ * | SIGXCPU | coredump |
+ * | SIGXFSZ | coredump |
+ * | SIGVTALRM | terminate |
+ * | SIGPROF | terminate |
+ * | SIGPOLL/SIGIO | terminate |
+ * | SIGSYS/SIGUNUSED | coredump |
+ * | SIGSTKFLT | terminate |
+ * | SIGWINCH | ignore |
+ * | SIGPWR | terminate |
+ * | SIGRTMIN-SIGRTMAX | terminate |
+ * +--------------------+------------------+
+ * | non-POSIX signal | default action |
+ * +--------------------+------------------+
+ * | SIGEMT | coredump |
+ * +--------------------+------------------+
+ *
+ * (+) For SIGKILL and SIGSTOP the action is "always", not just "default".
+ * (*) Special job control effects:
+ * When SIGCONT is sent, it resumes the process (all threads in the group)
+ * from TASK_STOPPED state and also clears any pending/queued stop signals
+ * (any of those marked with "stop(*)"). This happens regardless of blocking,
+ * catching, or ignoring SIGCONT. When any stop signal is sent, it clears
+ * any pending/queued SIGCONT signals; this happens regardless of blocking,
+ * catching, or ignored the stop signal, though (except for SIGSTOP) the
+ * default action of stopping the process may happen later or never.
+ */
+
+#ifdef SIGEMT
+#define SIGEMT_MASK rt_sigmask(SIGEMT)
+#else
+#define SIGEMT_MASK 0
+#endif
+
+#if SIGRTMIN > BITS_PER_LONG
+#define rt_sigmask(sig) (1ULL << ((sig)-1))
+#else
+#define rt_sigmask(sig) sigmask(sig)
+#endif
+#define siginmask(sig, mask) (rt_sigmask(sig) & (mask))
+
+#define SIG_KERNEL_ONLY_MASK (\
+ rt_sigmask(SIGKILL) | rt_sigmask(SIGSTOP))
+
+#define SIG_KERNEL_STOP_MASK (\
+ rt_sigmask(SIGSTOP) | rt_sigmask(SIGTSTP) | \
+ rt_sigmask(SIGTTIN) | rt_sigmask(SIGTTOU) )
+
+#define SIG_KERNEL_COREDUMP_MASK (\
+ rt_sigmask(SIGQUIT) | rt_sigmask(SIGILL) | \
+ rt_sigmask(SIGTRAP) | rt_sigmask(SIGABRT) | \
+ rt_sigmask(SIGFPE) | rt_sigmask(SIGSEGV) | \
+ rt_sigmask(SIGBUS) | rt_sigmask(SIGSYS) | \
+ rt_sigmask(SIGXCPU) | rt_sigmask(SIGXFSZ) | \
+ SIGEMT_MASK )
+
+#define SIG_KERNEL_IGNORE_MASK (\
+ rt_sigmask(SIGCONT) | rt_sigmask(SIGCHLD) | \
+ rt_sigmask(SIGWINCH) | rt_sigmask(SIGURG) )
+
+#define sig_kernel_only(sig) \
+ (((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_ONLY_MASK))
+#define sig_kernel_coredump(sig) \
+ (((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_COREDUMP_MASK))
+#define sig_kernel_ignore(sig) \
+ (((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_IGNORE_MASK))
+#define sig_kernel_stop(sig) \
+ (((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_STOP_MASK))
+
+#define sig_needs_tasklist(sig) ((sig) == SIGCONT)
+
+#define sig_user_defined(t, signr) \
+ (((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_DFL) && \
+ ((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_IGN))
+
+#define sig_fatal(t, signr) \
+ (!siginmask(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
+ (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
+
#endif /* __KERNEL__ */
#endif /* _LINUX_SIGNAL_H */
projects / linux-2.6-omap-h63xx.git / blobdiff