ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */
ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */
ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */
- ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */
ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */
ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */
ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */
+ ATA_PFLAG_UNLOADING = (1 << 9), /* driver is being unloaded */
+ ATA_PFLAG_UNLOADED = (1 << 10), /* driver is unloaded */
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
/* host set flags */
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */
ATA_HOST_STARTED = (1 << 1), /* Host started */
+ ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */
/* bits 24:31 of host->flags are reserved for LLD specific flags */
ATA_TIMING_CYC8B,
ATA_TIMING_ACTIVE = (1 << 4),
ATA_TIMING_RECOVER = (1 << 5),
- ATA_TIMING_CYCLE = (1 << 6),
- ATA_TIMING_UDMA = (1 << 7),
+ ATA_TIMING_DMACK_HOLD = (1 << 6),
+ ATA_TIMING_CYCLE = (1 << 7),
+ ATA_TIMING_UDMA = (1 << 8),
ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
- ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
+ ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
+ ATA_TIMING_UDMA,
};
enum ata_xfer_mask {
unsigned short cyc8b; /* t0 for 8-bit I/O */
unsigned short active; /* t2 or tD */
unsigned short recover; /* t2i or tK */
+ unsigned short dmack_hold; /* tj */
unsigned short cycle; /* t0 */
unsigned short udma; /* t2CYCTYP/2 */
};
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
+ int cmd, void __user *arg);
extern void ata_sas_port_destroy(struct ata_port *);
extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
struct ata_port_info *, struct Scsi_Host *);
return ata_tag_valid(link->active_tag) || link->sactive;
}
-extern struct ata_link *__ata_port_next_link(struct ata_port *ap,
- struct ata_link *link,
- bool dev_only);
+/*
+ * Iterators
+ *
+ * ATA_LITER_* constants are used to select link iteration mode and
+ * ATA_DITER_* device iteration mode.
+ *
+ * For a custom iteration directly using ata_{link|dev}_next(), if
+ * @link or @dev, respectively, is NULL, the first element is
+ * returned. @dev and @link can be any valid device or link and the
+ * next element according to the iteration mode will be returned.
+ * After the last element, NULL is returned.
+ */
+enum ata_link_iter_mode {
+ ATA_LITER_EDGE, /* if present, PMP links only; otherwise,
+ * host link. no slave link */
+ ATA_LITER_HOST_FIRST, /* host link followed by PMP or slave links */
+ ATA_LITER_PMP_FIRST, /* PMP links followed by host link,
+ * slave link still comes after host link */
+};
+
+enum ata_dev_iter_mode {
+ ATA_DITER_ENABLED,
+ ATA_DITER_ENABLED_REVERSE,
+ ATA_DITER_ALL,
+ ATA_DITER_ALL_REVERSE,
+};
-#define __ata_port_for_each_link(link, ap) \
- for ((link) = __ata_port_next_link((ap), NULL, false); (link); \
- (link) = __ata_port_next_link((ap), (link), false))
+extern struct ata_link *ata_link_next(struct ata_link *link,
+ struct ata_port *ap,
+ enum ata_link_iter_mode mode);
-#define ata_port_for_each_link(link, ap) \
- for ((link) = __ata_port_next_link((ap), NULL, true); (link); \
- (link) = __ata_port_next_link((ap), (link), true))
+extern struct ata_device *ata_dev_next(struct ata_device *dev,
+ struct ata_link *link,
+ enum ata_dev_iter_mode mode);
-#define ata_link_for_each_dev(dev, link) \
- for ((dev) = (link)->device; \
- (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \
- (dev)++)
+/*
+ * Shortcut notation for iterations
+ *
+ * ata_for_each_link() iterates over each link of @ap according to
+ * @mode. @link points to the current link in the loop. @link is
+ * NULL after loop termination. ata_for_each_dev() works the same way
+ * except that it iterates over each device of @link.
+ *
+ * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be
+ * specified when using the following shorthand notations. Only the
+ * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be
+ * specified. This not only increases brevity but also makes it
+ * impossible to use ATA_LITER_* for device iteration or vice-versa.
+ */
+#define ata_for_each_link(link, ap, mode) \
+ for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \
+ (link) = ata_link_next((link), (ap), ATA_LITER_##mode))
-#define ata_link_for_each_dev_reverse(dev, link) \
- for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \
- (dev) >= (link)->device || ((dev) = NULL); (dev)--)
+#define ata_for_each_dev(dev, link, mode) \
+ for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \
+ (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode))
/**
* ata_ncq_enabled - Test whether NCQ is enabled
extern const struct ata_port_operations ata_sff_port_ops;
extern const struct ata_port_operations ata_bmdma_port_ops;
+extern const struct ata_port_operations ata_bmdma32_port_ops;
/* PIO only, sg_tablesize and dma_boundary limits can be removed */
#define ATA_PIO_SHT(drv_name) \
const struct ata_taskfile *tf);
extern unsigned int ata_sff_data_xfer(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
+extern unsigned int ata_sff_data_xfer32(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw);
extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
extern u8 ata_sff_irq_on(struct ata_port *ap);
projects / linux-2.6-omap-h63xx.git / blobdiff